diff options
author | Biju Das <biju.das.jz@bp.renesas.com> | 2022-02-03 20:06:33 +0300 |
---|---|---|
committer | Geert Uytterhoeven <geert+renesas@glider.be> | 2022-02-08 11:45:58 +0300 |
commit | 726fd781195dc99cdcb60b2678694bfa5ccd1825 (patch) | |
tree | 08de0c41c6443a6bda50110a619f802b524932cb /arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi | |
parent | 81a27b1f69022174567e8237d3de2534821671ba (diff) | |
download | linux-726fd781195dc99cdcb60b2678694bfa5ccd1825.tar.xz |
arm64: dts: renesas: rzg2l-smarc: Add common dtsi file
RZ/{G2L,V2L} and G2LC SoC use the same carrier board, but the SoM is
different.
Different pin mapping is possible on SoM. For eg:- RZ/G2L SMARC EVK
uses SCIF2, whereas RZ/G2LC uses SCIF1 for the serial interface available
on PMOD1.
This patch adds support for handling the pin mapping differences by moving
definitions common to RZ/G2L and RZ/G2LC to a common dtsi file.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220203170636.7747-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Diffstat (limited to 'arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi')
-rw-r--r-- | arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi | 193 |
1 files changed, 0 insertions, 193 deletions
diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi index 78034f36156d..33ddfd18bd56 100644 --- a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi @@ -8,164 +8,13 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/rzg2l-pinctrl.h> -/* - * SSI-WM8978 - * - * This command is required when Playback/Capture - * - * amixer cset name='Left Input Mixer L2 Switch' on - * amixer cset name='Right Input Mixer R2 Switch' on - * amixer cset name='Headphone Playback Volume' 100 - * amixer cset name='PCM Volume' 100% - * amixer cset name='Input PGA Volume' 25 - * - */ - /* comment the #define statement to disable SCIF2 (SER0) on PMOD1 (CN7) */ #define PMOD1_SER0 1 / { aliases { - serial0 = &scif0; serial1 = &scif2; - i2c0 = &i2c0; - i2c1 = &i2c1; - i2c3 = &i2c3; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - audio_mclock: audio_mclock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <11289600>; - }; - - snd_rzg2l: sound { - compatible = "simple-audio-card"; - simple-audio-card,format = "i2s"; - simple-audio-card,bitclock-master = <&cpu_dai>; - simple-audio-card,frame-master = <&cpu_dai>; - simple-audio-card,mclk-fs = <256>; - - simple-audio-card,widgets = "Microphone", "Microphone Jack"; - simple-audio-card,routing = - "L2", "Mic Bias", - "R2", "Mic Bias", - "Mic Bias", "Microphone Jack"; - - cpu_dai: simple-audio-card,cpu { - sound-dai = <&ssi0>; - }; - - codec_dai: simple-audio-card,codec { - clocks = <&audio_mclock>; - sound-dai = <&wm8978>; - }; - }; - - usb0_vbus_otg: regulator-usb0-vbus-otg { - compatible = "regulator-fixed"; - - regulator-name = "USB0_VBUS_OTG"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - vccq_sdhi1: regulator-vccq-sdhi1 { - compatible = "regulator-gpio"; - regulator-name = "SDHI1 VccQ"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - gpios = <&pinctrl RZG2L_GPIO(39, 1) GPIO_ACTIVE_HIGH>; - gpios-states = <1>; - states = <3300000 1>, <1800000 0>; - }; -}; - -&audio_clk1{ - clock-frequency = <11289600>; -}; - -&audio_clk2{ - clock-frequency = <12288000>; -}; - -&canfd { - pinctrl-0 = <&can0_pins &can1_pins>; - pinctrl-names = "default"; - status = "okay"; - - channel0 { - status = "okay"; }; - - channel1 { - status = "okay"; - }; -}; - -&ehci0 { - dr_mode = "otg"; - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - -&hsusb { - dr_mode = "otg"; - status = "okay"; -}; - -&i2c0 { - pinctrl-0 = <&i2c0_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&i2c1 { - pinctrl-0 = <&i2c1_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&i2c3 { - pinctrl-0 = <&i2c3_pins>; - pinctrl-names = "default"; - clock-frequency = <400000>; - - status = "okay"; - - wm8978: codec@1a { - compatible = "wlf,wm8978"; - #sound-dai-cells = <0>; - reg = <0x1a>; - }; -}; - -&ohci0 { - dr_mode = "otg"; - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - -&phyrst { - status = "okay"; -}; - -&scif0 { - pinctrl-0 = <&scif0_pins>; - pinctrl-names = "default"; - status = "okay"; }; /* @@ -184,45 +33,3 @@ status = "okay"; }; #endif - -&sdhi1 { - pinctrl-0 = <&sdhi1_pins>; - pinctrl-1 = <&sdhi1_pins_uhs>; - pinctrl-names = "default", "state_uhs"; - - vmmc-supply = <®_3p3v>; - vqmmc-supply = <&vccq_sdhi1>; - bus-width = <4>; - sd-uhs-sdr50; - sd-uhs-sdr104; - status = "okay"; -}; - -&spi1 { - pinctrl-0 = <&spi1_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&ssi0 { - pinctrl-0 = <&ssi0_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&usb2_phy0 { - pinctrl-0 = <&usb0_pins>; - pinctrl-names = "default"; - - vbus-supply = <&usb0_vbus_otg>; - status = "okay"; -}; - -&usb2_phy1 { - pinctrl-0 = <&usb1_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; |