summaryrefslogtreecommitdiff
path: root/arch/powerpc/platforms/powernv/idle.c
diff options
context:
space:
mode:
authorAthira Rajeev <atrajeev@linux.vnet.ibm.com>2020-07-17 17:38:23 +0300
committerMichael Ellerman <mpe@ellerman.id.au>2020-07-22 14:56:42 +0300
commit1cade527f6e9bec6a6412d0641643c359ada8096 (patch)
tree9d5f4e5e45d68ac56c36fa8872e895e595db7c62 /arch/powerpc/platforms/powernv/idle.c
parent80350a4bac992e3404067d31ff901ae9ff76aaa8 (diff)
downloadlinux-1cade527f6e9bec6a6412d0641643c359ada8096.tar.xz
powerpc/perf: BHRB control to disable BHRB logic when not used
PowerISA v3.1 has few updates for the Branch History Rolling Buffer(BHRB). BHRB disable is controlled via Monitor Mode Control Register A (MMCRA) bit, namely "BHRB Recording Disable (BHRBRD)". This field controls whether BHRB entries are written when BHRB recording is enabled by other bits. This patch implements support for this BHRB disable bit. By setting 0b1 to this bit will disable the BHRB and by setting 0b0 to this bit will have BHRB enabled. This addresses backward compatibility (for older OS), since this bit will be cleared and hardware will be writing to BHRB by default. This patch addresses changes to set MMCRA (BHRBRD) at boot for power10 (there by the core will run faster) and enable this feature only on runtime ie, on explicit need from user. Also save/restore MMCRA in the restore path of state-loss idle state to make sure we keep BHRB disabled if it was not enabled on request at runtime. Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1594996707-3727-12-git-send-email-atrajeev@linux.vnet.ibm.com
Diffstat (limited to 'arch/powerpc/platforms/powernv/idle.c')
-rw-r--r--arch/powerpc/platforms/powernv/idle.c22
1 files changed, 20 insertions, 2 deletions
diff --git a/arch/powerpc/platforms/powernv/idle.c b/arch/powerpc/platforms/powernv/idle.c
index 2dd467383a88..1c9d0a9d50e0 100644
--- a/arch/powerpc/platforms/powernv/idle.c
+++ b/arch/powerpc/platforms/powernv/idle.c
@@ -611,6 +611,7 @@ static unsigned long power9_idle_stop(unsigned long psscr, bool mmu_on)
unsigned long srr1;
unsigned long pls;
unsigned long mmcr0 = 0;
+ unsigned long mmcra = 0;
struct p9_sprs sprs = {}; /* avoid false used-uninitialised */
bool sprs_saved = false;
@@ -657,6 +658,21 @@ static unsigned long power9_idle_stop(unsigned long psscr, bool mmu_on)
*/
mmcr0 = mfspr(SPRN_MMCR0);
}
+
+ if (cpu_has_feature(CPU_FTR_ARCH_31)) {
+ /*
+ * POWER10 uses MMCRA (BHRBRD) as BHRB disable bit.
+ * If the user hasn't asked for the BHRB to be
+ * written, the value of MMCRA[BHRBRD] is 1.
+ * On wakeup from stop, MMCRA[BHRBD] will be 0,
+ * since it is previleged resource and will be lost.
+ * Thus, if we do not save and restore the MMCRA[BHRBD],
+ * hardware will be needlessly writing to the BHRB
+ * in problem mode.
+ */
+ mmcra = mfspr(SPRN_MMCRA);
+ }
+
if ((psscr & PSSCR_RL_MASK) >= pnv_first_spr_loss_level) {
sprs.lpcr = mfspr(SPRN_LPCR);
sprs.hfscr = mfspr(SPRN_HFSCR);
@@ -700,8 +716,6 @@ static unsigned long power9_idle_stop(unsigned long psscr, bool mmu_on)
WARN_ON_ONCE(mfmsr() & (MSR_IR|MSR_DR));
if ((srr1 & SRR1_WAKESTATE) != SRR1_WS_NOLOSS) {
- unsigned long mmcra;
-
/*
* We don't need an isync after the mtsprs here because the
* upcoming mtmsrd is execution synchronizing.
@@ -721,6 +735,10 @@ static unsigned long power9_idle_stop(unsigned long psscr, bool mmu_on)
mtspr(SPRN_MMCR0, mmcr0);
}
+ /* Reload MMCRA to restore BHRB disable bit for POWER10 */
+ if (cpu_has_feature(CPU_FTR_ARCH_31))
+ mtspr(SPRN_MMCRA, mmcra);
+
/*
* DD2.2 and earlier need to set then clear bit 60 in MMCRA
* to ensure the PMU starts running.