Merge branch 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 asm updates from Ingo Molnar:
 "The main changes in this cycle were:

   - Cross-arch changes to move the linker sections for NOTES and
     EXCEPTION_TABLE into the RO_DATA area, where they belong on most
     architectures. (Kees Cook)

   - Switch the x86 linker fill byte from x90 (NOP) to 0xcc (INT3), to
     trap jumps into the middle of those padding areas instead of
     sliding execution. (Kees Cook)

   - A thorough cleanup of symbol definitions within x86 assembler code.
     The rather randomly named macros got streamlined around a
     (hopefully) straightforward naming scheme:

        SYM_START(name, linkage, align...)
        SYM_END(name, sym_type)

        SYM_FUNC_START(name)
        SYM_FUNC_END(name)

        SYM_CODE_START(name)
        SYM_CODE_END(name)

        SYM_DATA_START(name)
        SYM_DATA_END(name)

     etc - with about three times of these basic primitives with some
     label, local symbol or attribute variant, expressed via postfixes.

     No change in functionality intended. (Jiri Slaby)

   - Misc other changes, cleanups and smaller fixes"

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (67 commits)
  x86/entry/64: Remove pointless jump in paranoid_exit
  x86/entry/32: Remove unused resume_userspace label
  x86/build/vdso: Remove meaningless CFLAGS_REMOVE_*.o
  m68k: Convert missed RODATA to RO_DATA
  x86/vmlinux: Use INT3 instead of NOP for linker fill bytes
  x86/mm: Report actual image regions in /proc/iomem
  x86/mm: Report which part of kernel image is freed
  x86/mm: Remove redundant address-of operators on addresses
  xtensa: Move EXCEPTION_TABLE to RO_DATA segment
  powerpc: Move EXCEPTION_TABLE to RO_DATA segment
  parisc: Move EXCEPTION_TABLE to RO_DATA segment
  microblaze: Move EXCEPTION_TABLE to RO_DATA segment
  ia64: Move EXCEPTION_TABLE to RO_DATA segment
  h8300: Move EXCEPTION_TABLE to RO_DATA segment
  c6x: Move EXCEPTION_TABLE to RO_DATA segment
  arm64: Move EXCEPTION_TABLE to RO_DATA segment
  alpha: Move EXCEPTION_TABLE to RO_DATA segment
  x86/vmlinux: Move EXCEPTION_TABLE to RO_DATA segment
  x86/vmlinux: Actually use _etext for the end of the text segment
  vmlinux.lds.h: Allow EXCEPTION_TABLE to live in RO_DATA
  ...

1 files changed, 14 insertions, 14 deletions

diff --git a/arch/x86/xen/xen-asm.S b/arch/x86/xen/xen-asm.S
index be104eef80be..508fe204520b 100644
--- a/arch/x86/xen/xen-asm.S
+++ b/arch/x86/xen/xen-asm.S
@@ -19,7 +19,7 @@
  * event status with one and operation.  If there are pending events,
  * then enter the hypervisor to get them handled.
  */
-ENTRY(xen_irq_enable_direct)
+SYM_FUNC_START(xen_irq_enable_direct)
 	FRAME_BEGIN
 	/* Unmask events */
 	movb $0, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask
@@ -38,17 +38,17 @@ ENTRY(xen_irq_enable_direct)
 1:
 	FRAME_END
 	ret
-	ENDPROC(xen_irq_enable_direct)
+SYM_FUNC_END(xen_irq_enable_direct)
 
 
 /*
  * Disabling events is simply a matter of making the event mask
  * non-zero.
  */
-ENTRY(xen_irq_disable_direct)
+SYM_FUNC_START(xen_irq_disable_direct)
 	movb $1, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask
 	ret
-ENDPROC(xen_irq_disable_direct)
+SYM_FUNC_END(xen_irq_disable_direct)
 
 /*
  * (xen_)save_fl is used to get the current interrupt enable status.
@@ -59,12 +59,12 @@ ENDPROC(xen_irq_disable_direct)
  * undefined.  We need to toggle the state of the bit, because Xen and
  * x86 use opposite senses (mask vs enable).
  */
-ENTRY(xen_save_fl_direct)
+SYM_FUNC_START(xen_save_fl_direct)
 	testb $0xff, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask
 	setz %ah
 	addb %ah, %ah
 	ret
-	ENDPROC(xen_save_fl_direct)
+SYM_FUNC_END(xen_save_fl_direct)
 
 
 /*
@@ -74,7 +74,7 @@ ENTRY(xen_save_fl_direct)
  * interrupt mask state, it checks for unmasked pending events and
  * enters the hypervisor to get them delivered if so.
  */
-ENTRY(xen_restore_fl_direct)
+SYM_FUNC_START(xen_restore_fl_direct)
 	FRAME_BEGIN
 #ifdef CONFIG_X86_64
 	testw $X86_EFLAGS_IF, %di
@@ -95,14 +95,14 @@ ENTRY(xen_restore_fl_direct)
 1:
 	FRAME_END
 	ret
-	ENDPROC(xen_restore_fl_direct)
+SYM_FUNC_END(xen_restore_fl_direct)
 
 
 /*
  * Force an event check by making a hypercall, but preserve regs
  * before making the call.
  */
-ENTRY(check_events)
+SYM_FUNC_START(check_events)
 	FRAME_BEGIN
 #ifdef CONFIG_X86_32
 	push %eax
@@ -135,19 +135,19 @@ ENTRY(check_events)
 #endif
 	FRAME_END
 	ret
-ENDPROC(check_events)
+SYM_FUNC_END(check_events)
 
-ENTRY(xen_read_cr2)
+SYM_FUNC_START(xen_read_cr2)
 	FRAME_BEGIN
 	_ASM_MOV PER_CPU_VAR(xen_vcpu), %_ASM_AX
 	_ASM_MOV XEN_vcpu_info_arch_cr2(%_ASM_AX), %_ASM_AX
 	FRAME_END
 	ret
-	ENDPROC(xen_read_cr2);
+SYM_FUNC_END(xen_read_cr2);
 
-ENTRY(xen_read_cr2_direct)
+SYM_FUNC_START(xen_read_cr2_direct)
 	FRAME_BEGIN
 	_ASM_MOV PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_arch_cr2, %_ASM_AX
 	FRAME_END
 	ret
-	ENDPROC(xen_read_cr2_direct);
+SYM_FUNC_END(xen_read_cr2_direct);