diff options
| author | Wolfram Sang <wsa+renesas@sang-engineering.com> | 2024-07-06 14:20:42 +0300 |
|---|---|---|
| committer | Andi Shyti <andi.shyti@kernel.org> | 2024-07-11 16:14:19 +0300 |
| commit | b340db73513e95aed95d00157afa4dc7479903ed (patch) | |
| tree | a242423e1f57c5339519eb51b2b55a94ac478e02 /drivers/i2c/busses/i2c-rk3x.c | |
| parent | e1571b1fb4ff9118315b627cc6dae524709899cd (diff) | |
| download | linux-b340db73513e95aed95d00157afa4dc7479903ed.tar.xz | |
i2c: rk3x: reword according to newest specification
Change the wording of this driver wrt. the newest I2C v7 and SMBus 3.2
specifications and replace "master/slave" with more appropriate terms.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Diffstat (limited to 'drivers/i2c/busses/i2c-rk3x.c')
| -rw-r--r-- | drivers/i2c/busses/i2c-rk3x.c | 20 |
1 files changed, 10 insertions, 10 deletions
diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c index beca61700c89..4ef9bad77b85 100644 --- a/drivers/i2c/busses/i2c-rk3x.c +++ b/drivers/i2c/busses/i2c-rk3x.c @@ -28,8 +28,8 @@ /* Register Map */ #define REG_CON 0x00 /* control register */ #define REG_CLKDIV 0x04 /* clock divisor register */ -#define REG_MRXADDR 0x08 /* slave address for REGISTER_TX */ -#define REG_MRXRADDR 0x0c /* slave register address for REGISTER_TX */ +#define REG_MRXADDR 0x08 /* target address for REGISTER_TX */ +#define REG_MRXRADDR 0x0c /* target register address for REGISTER_TX */ #define REG_MTXCNT 0x10 /* number of bytes to be transmitted */ #define REG_MRXCNT 0x14 /* number of bytes to be received */ #define REG_IEN 0x18 /* interrupt enable */ @@ -68,8 +68,8 @@ enum { /* REG_IEN/REG_IPD bits */ #define REG_INT_BTF BIT(0) /* a byte was transmitted */ #define REG_INT_BRF BIT(1) /* a byte was received */ -#define REG_INT_MBTF BIT(2) /* master data transmit finished */ -#define REG_INT_MBRF BIT(3) /* master data receive finished */ +#define REG_INT_MBTF BIT(2) /* controller data transmit finished */ +#define REG_INT_MBRF BIT(3) /* controller data receive finished */ #define REG_INT_START BIT(4) /* START condition generated */ #define REG_INT_STOP BIT(5) /* STOP condition generated */ #define REG_INT_NAKRCV BIT(6) /* NACK received */ @@ -184,7 +184,7 @@ struct rk3x_i2c_soc_data { * @wait: the waitqueue to wait for i2c transfer * @busy: the condition for the event to wait for * @msg: current i2c message - * @addr: addr of i2c slave device + * @addr: addr of i2c target device * @mode: mode of i2c transfer * @is_last_msg: flag determines whether it is the last msg in this transfer * @state: state of i2c transfer @@ -979,7 +979,7 @@ static int rk3x_i2c_setup(struct rk3x_i2c *i2c, struct i2c_msg *msgs, int num) /* * The I2C adapter can issue a small (len < 4) write packet before * reading. This speeds up SMBus-style register reads. - * The MRXADDR/MRXRADDR hold the slave address and the slave register + * The MRXADDR/MRXRADDR hold the target address and the target register * address in this case. */ @@ -1016,7 +1016,7 @@ static int rk3x_i2c_setup(struct rk3x_i2c *i2c, struct i2c_msg *msgs, int num) addr |= 1; /* set read bit */ /* - * We have to transmit the slave addr first. Use + * We have to transmit the target addr first. Use * MOD_REGISTER_TX for that purpose. */ i2c->mode = REG_CON_MOD_REGISTER_TX; @@ -1160,9 +1160,9 @@ static u32 rk3x_i2c_func(struct i2c_adapter *adap) } static const struct i2c_algorithm rk3x_i2c_algorithm = { - .master_xfer = rk3x_i2c_xfer, - .master_xfer_atomic = rk3x_i2c_xfer_polling, - .functionality = rk3x_i2c_func, + .xfer = rk3x_i2c_xfer, + .xfer_atomic = rk3x_i2c_xfer_polling, + .functionality = rk3x_i2c_func, }; static const struct rk3x_i2c_soc_data rv1108_soc_data = { |