diff options
author | Octavian Purdila <octavian.purdila@intel.com> | 2015-03-22 21:33:40 +0300 |
---|---|---|
committer | Jonathan Cameron <jic23@kernel.org> | 2015-03-29 18:17:11 +0300 |
commit | 3bbec9773389112330954a6a64422eaa78d546c1 (patch) | |
tree | 76c1252099a9250f8808f5b932465d913f76c13f /drivers/iio/accel/bmc150-accel.c | |
parent | f4f4673b7535eff4ee1a8cfb1685fa1e1a0cb79d (diff) | |
download | linux-3bbec9773389112330954a6a64422eaa78d546c1.tar.xz |
iio: bmc150_accel: add support for hardware fifo
We only advertise hardware fifo support if the I2C bus supports full
I2C or smbus I2C block data reads since it is mandatory to read the
full frame in one read (otherwise the rest of the frame is discarded).
The hardware fifo is enabled only when triggers are not active because:
(a) when using the any-motion trigger the user expects to see samples
based on ROC events, but the fifo stores samples based on the sample
frequency
(b) the data-ready trigger is waking the CPU for for every sample, so
using the hardware fifo does not have any benefit
Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Diffstat (limited to 'drivers/iio/accel/bmc150-accel.c')
-rw-r--r-- | drivers/iio/accel/bmc150-accel.c | 408 |
1 files changed, 392 insertions, 16 deletions
diff --git a/drivers/iio/accel/bmc150-accel.c b/drivers/iio/accel/bmc150-accel.c index f1b80c4c0b35..4026122a7592 100644 --- a/drivers/iio/accel/bmc150-accel.c +++ b/drivers/iio/accel/bmc150-accel.c @@ -70,7 +70,9 @@ #define BMC150_ACCEL_INT_MAP_0_BIT_SLOPE BIT(2) #define BMC150_ACCEL_REG_INT_MAP_1 0x1A -#define BMC150_ACCEL_INT_MAP_1_BIT_DATA BIT(0) +#define BMC150_ACCEL_INT_MAP_1_BIT_DATA BIT(0) +#define BMC150_ACCEL_INT_MAP_1_BIT_FWM BIT(1) +#define BMC150_ACCEL_INT_MAP_1_BIT_FFULL BIT(2) #define BMC150_ACCEL_REG_INT_RST_LATCH 0x21 #define BMC150_ACCEL_INT_MODE_LATCH_RESET 0x80 @@ -83,7 +85,9 @@ #define BMC150_ACCEL_INT_EN_BIT_SLP_Z BIT(2) #define BMC150_ACCEL_REG_INT_EN_1 0x17 -#define BMC150_ACCEL_INT_EN_BIT_DATA_EN BIT(4) +#define BMC150_ACCEL_INT_EN_BIT_DATA_EN BIT(4) +#define BMC150_ACCEL_INT_EN_BIT_FFULL_EN BIT(5) +#define BMC150_ACCEL_INT_EN_BIT_FWM_EN BIT(6) #define BMC150_ACCEL_REG_INT_OUT_CTRL 0x20 #define BMC150_ACCEL_INT_OUT_CTRL_INT1_LVL BIT(0) @@ -122,6 +126,12 @@ #define BMC150_ACCEL_AXIS_TO_REG(axis) (BMC150_ACCEL_REG_XOUT_L + (axis * 2)) #define BMC150_AUTO_SUSPEND_DELAY_MS 2000 +#define BMC150_ACCEL_REG_FIFO_STATUS 0x0E +#define BMC150_ACCEL_REG_FIFO_CONFIG0 0x30 +#define BMC150_ACCEL_REG_FIFO_CONFIG1 0x3E +#define BMC150_ACCEL_REG_FIFO_DATA 0x3F +#define BMC150_ACCEL_FIFO_LENGTH 32 + enum bmc150_accel_axis { AXIS_X, AXIS_Y, @@ -179,13 +189,14 @@ struct bmc150_accel_data { atomic_t active_intr; struct bmc150_accel_trigger triggers[BMC150_ACCEL_TRIGGERS]; struct mutex mutex; + u8 fifo_mode, watermark; s16 buffer[8]; u8 bw_bits; u32 slope_dur; u32 slope_thres; u32 range; int ev_enable_state; - int64_t timestamp; + int64_t timestamp, old_timestamp; const struct bmc150_accel_chip_info *chip_info; }; @@ -470,6 +481,12 @@ static const struct bmc150_accel_interrupt_info { BMC150_ACCEL_INT_EN_BIT_SLP_Y | BMC150_ACCEL_INT_EN_BIT_SLP_Z }, + { /* fifo watermark interrupt */ + .map_reg = BMC150_ACCEL_REG_INT_MAP_1, + .map_bitmask = BMC150_ACCEL_INT_MAP_1_BIT_FWM, + .en_reg = BMC150_ACCEL_REG_INT_EN_1, + .en_bitmask = BMC150_ACCEL_INT_EN_BIT_FWM_EN, + }, }; static void bmc150_accel_interrupts_setup(struct iio_dev *indio_dev, @@ -823,6 +840,214 @@ static int bmc150_accel_validate_trigger(struct iio_dev *indio_dev, return -EINVAL; } +static ssize_t bmc150_accel_get_fifo_watermark(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct bmc150_accel_data *data = iio_priv(indio_dev); + int wm; + + mutex_lock(&data->mutex); + wm = data->watermark; + mutex_unlock(&data->mutex); + + return sprintf(buf, "%d\n", wm); +} + +static ssize_t bmc150_accel_get_fifo_state(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct bmc150_accel_data *data = iio_priv(indio_dev); + bool state; + + mutex_lock(&data->mutex); + state = data->fifo_mode; + mutex_unlock(&data->mutex); + + return sprintf(buf, "%d\n", state); +} + +static IIO_CONST_ATTR(hwfifo_watermark_min, "1"); +static IIO_CONST_ATTR(hwfifo_watermark_max, + __stringify(BMC150_ACCEL_FIFO_LENGTH)); +static IIO_DEVICE_ATTR(hwfifo_enabled, S_IRUGO, + bmc150_accel_get_fifo_state, NULL, 0); +static IIO_DEVICE_ATTR(hwfifo_watermark, S_IRUGO, + bmc150_accel_get_fifo_watermark, NULL, 0); + +static const struct attribute *bmc150_accel_fifo_attributes[] = { + &iio_const_attr_hwfifo_watermark_min.dev_attr.attr, + &iio_const_attr_hwfifo_watermark_max.dev_attr.attr, + &iio_dev_attr_hwfifo_watermark.dev_attr.attr, + &iio_dev_attr_hwfifo_enabled.dev_attr.attr, + NULL, +}; + +static int bmc150_accel_set_watermark(struct iio_dev *indio_dev, unsigned val) +{ + struct bmc150_accel_data *data = iio_priv(indio_dev); + + if (val > BMC150_ACCEL_FIFO_LENGTH) + val = BMC150_ACCEL_FIFO_LENGTH; + + mutex_lock(&data->mutex); + data->watermark = val; + mutex_unlock(&data->mutex); + + return 0; +} + +/* + * We must read at least one full frame in one burst, otherwise the rest of the + * frame data is discarded. + */ +static int bmc150_accel_fifo_transfer(const struct i2c_client *client, + char *buffer, int samples) +{ + int sample_length = 3 * 2; + u8 reg_fifo_data = BMC150_ACCEL_REG_FIFO_DATA; + int ret = -EIO; + + if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + struct i2c_msg msg[2] = { + { + .addr = client->addr, + .flags = 0, + .buf = ®_fifo_data, + .len = sizeof(reg_fifo_data), + }, + { + .addr = client->addr, + .flags = I2C_M_RD, + .buf = (u8 *)buffer, + .len = samples * sample_length, + } + }; + + ret = i2c_transfer(client->adapter, msg, 2); + if (ret != 2) + ret = -EIO; + else + ret = 0; + } else { + int i, step = I2C_SMBUS_BLOCK_MAX / sample_length; + + for (i = 0; i < samples * sample_length; i += step) { + ret = i2c_smbus_read_i2c_block_data(client, + reg_fifo_data, step, + &buffer[i]); + if (ret != step) { + ret = -EIO; + break; + } + + ret = 0; + } + } + + if (ret) + dev_err(&client->dev, "Error transferring data from fifo\n"); + + return ret; +} + +static int __bmc150_accel_fifo_flush(struct iio_dev *indio_dev, + unsigned samples, bool irq) +{ + struct bmc150_accel_data *data = iio_priv(indio_dev); + int ret, i; + u8 count; + u16 buffer[BMC150_ACCEL_FIFO_LENGTH * 3]; + int64_t tstamp; + uint64_t sample_period; + ret = i2c_smbus_read_byte_data(data->client, + BMC150_ACCEL_REG_FIFO_STATUS); + if (ret < 0) { + dev_err(&data->client->dev, "Error reading reg_fifo_status\n"); + return ret; + } + + count = ret & 0x7F; + + if (!count) + return 0; + + /* + * If we getting called from IRQ handler we know the stored timestamp is + * fairly accurate for the last stored sample. Otherwise, if we are + * called as a result of a read operation from userspace and hence + * before the watermark interrupt was triggered, take a timestamp + * now. We can fall anywhere in between two samples so the error in this + * case is at most one sample period. + */ + if (!irq) { + data->old_timestamp = data->timestamp; + data->timestamp = iio_get_time_ns(); + } + + /* + * Approximate timestamps for each of the sample based on the sampling + * frequency, timestamp for last sample and number of samples. + * + * Note that we can't use the current bandwidth settings to compute the + * sample period because the sample rate varies with the device + * (e.g. between 31.70ms to 32.20ms for a bandwidth of 15.63HZ). That + * small variation adds when we store a large number of samples and + * creates significant jitter between the last and first samples in + * different batches (e.g. 32ms vs 21ms). + * + * To avoid this issue we compute the actual sample period ourselves + * based on the timestamp delta between the last two flush operations. + */ + sample_period = (data->timestamp - data->old_timestamp); + do_div(sample_period, count); + tstamp = data->timestamp - (count - 1) * sample_period; + + if (samples && count > samples) + count = samples; + + ret = bmc150_accel_fifo_transfer(data->client, (u8 *)buffer, count); + if (ret) + return ret; + + /* + * Ideally we want the IIO core to handle the demux when running in fifo + * mode but not when running in triggered buffer mode. Unfortunately + * this does not seem to be possible, so stick with driver demux for + * now. + */ + for (i = 0; i < count; i++) { + u16 sample[8]; + int j, bit; + + j = 0; + for_each_set_bit(bit, indio_dev->active_scan_mask, + indio_dev->masklength) + memcpy(&sample[j++], &buffer[i * 3 + bit], 2); + + iio_push_to_buffers_with_timestamp(indio_dev, sample, tstamp); + + tstamp += sample_period; + } + + return count; +} + +static int bmc150_accel_fifo_flush(struct iio_dev *indio_dev, unsigned samples) +{ + struct bmc150_accel_data *data = iio_priv(indio_dev); + int ret; + + mutex_lock(&data->mutex); + ret = __bmc150_accel_fifo_flush(indio_dev, samples, false); + mutex_unlock(&data->mutex); + + return ret; +} + static IIO_CONST_ATTR_SAMP_FREQ_AVAIL( "7.810000 15.630000 31.250000 62.500000 125 250 500 1000"); @@ -962,6 +1187,20 @@ static const struct iio_info bmc150_accel_info = { .driver_module = THIS_MODULE, }; +static const struct iio_info bmc150_accel_info_fifo = { + .attrs = &bmc150_accel_attrs_group, + .read_raw = bmc150_accel_read_raw, + .write_raw = bmc150_accel_write_raw, + .read_event_value = bmc150_accel_read_event, + .write_event_value = bmc150_accel_write_event, + .write_event_config = bmc150_accel_write_event_config, + .read_event_config = bmc150_accel_read_event_config, + .validate_trigger = bmc150_accel_validate_trigger, + .hwfifo_set_watermark = bmc150_accel_set_watermark, + .hwfifo_flush_to_buffer = bmc150_accel_fifo_flush, + .driver_module = THIS_MODULE, +}; + static irqreturn_t bmc150_accel_trigger_handler(int irq, void *p) { struct iio_poll_func *pf = p; @@ -1057,18 +1296,17 @@ static const struct iio_trigger_ops bmc150_accel_trigger_ops = { .owner = THIS_MODULE, }; -static irqreturn_t bmc150_accel_event_handler(int irq, void *private) +static int bmc150_accel_handle_roc_event(struct iio_dev *indio_dev) { - struct iio_dev *indio_dev = private; struct bmc150_accel_data *data = iio_priv(indio_dev); - int ret; int dir; + int ret; ret = i2c_smbus_read_byte_data(data->client, BMC150_ACCEL_REG_INT_STATUS_2); if (ret < 0) { dev_err(&data->client->dev, "Error reading reg_int_status_2\n"); - goto ack_intr_status; + return ret; } if (ret & BMC150_ACCEL_ANY_MOTION_BIT_SIGN) @@ -1097,35 +1335,73 @@ static irqreturn_t bmc150_accel_event_handler(int irq, void *private) IIO_EV_TYPE_ROC, dir), data->timestamp); -ack_intr_status: - if (!data->triggers[BMC150_ACCEL_TRIGGER_DATA_READY].enabled) + return ret; +} + +static irqreturn_t bmc150_accel_irq_thread_handler(int irq, void *private) +{ + struct iio_dev *indio_dev = private; + struct bmc150_accel_data *data = iio_priv(indio_dev); + bool ack = false; + int ret; + + mutex_lock(&data->mutex); + + if (data->fifo_mode) { + ret = __bmc150_accel_fifo_flush(indio_dev, + BMC150_ACCEL_FIFO_LENGTH, true); + if (ret > 0) + ack = true; + } + + if (data->ev_enable_state) { + ret = bmc150_accel_handle_roc_event(indio_dev); + if (ret > 0) + ack = true; + } + + if (ack) { ret = i2c_smbus_write_byte_data(data->client, BMC150_ACCEL_REG_INT_RST_LATCH, BMC150_ACCEL_INT_MODE_LATCH_INT | BMC150_ACCEL_INT_MODE_LATCH_RESET); + if (ret) + dev_err(&data->client->dev, "Error writing reg_int_rst_latch\n"); + ret = IRQ_HANDLED; + } else { + ret = IRQ_NONE; + } - return IRQ_HANDLED; + mutex_unlock(&data->mutex); + + return ret; } -static irqreturn_t bmc150_accel_data_rdy_trig_poll(int irq, void *private) +static irqreturn_t bmc150_accel_irq_handler(int irq, void *private) { struct iio_dev *indio_dev = private; struct bmc150_accel_data *data = iio_priv(indio_dev); + bool ack = false; int i; + data->old_timestamp = data->timestamp; data->timestamp = iio_get_time_ns(); for (i = 0; i < BMC150_ACCEL_TRIGGERS; i++) { if (data->triggers[i].enabled) { iio_trigger_poll(data->triggers[i].indio_trig); + ack = true; break; } } - if (data->ev_enable_state) + if (data->ev_enable_state || data->fifo_mode) return IRQ_WAKE_THREAD; - else + + if (ack) return IRQ_HANDLED; + + return IRQ_NONE; } static const char *bmc150_accel_match_acpi_device(struct device *dev, int *data) @@ -1232,6 +1508,94 @@ static int bmc150_accel_triggers_setup(struct iio_dev *indio_dev, return ret; } +#define BMC150_ACCEL_FIFO_MODE_STREAM 0x80 +#define BMC150_ACCEL_FIFO_MODE_FIFO 0x40 +#define BMC150_ACCEL_FIFO_MODE_BYPASS 0x00 + +static int bmc150_accel_fifo_set_mode(struct bmc150_accel_data *data) +{ + u8 reg = BMC150_ACCEL_REG_FIFO_CONFIG1; + int ret; + + ret = i2c_smbus_write_byte_data(data->client, reg, data->fifo_mode); + if (ret < 0) { + dev_err(&data->client->dev, "Error writing reg_fifo_config1\n"); + return ret; + } + + if (!data->fifo_mode) + return 0; + + ret = i2c_smbus_write_byte_data(data->client, + BMC150_ACCEL_REG_FIFO_CONFIG0, + data->watermark); + if (ret < 0) + dev_err(&data->client->dev, "Error writing reg_fifo_config0\n"); + + return ret; +} + +static int bmc150_accel_buffer_postenable(struct iio_dev *indio_dev) +{ + struct bmc150_accel_data *data = iio_priv(indio_dev); + int ret = 0; + + if (indio_dev->currentmode == INDIO_BUFFER_TRIGGERED) + return iio_triggered_buffer_postenable(indio_dev); + + mutex_lock(&data->mutex); + + if (!data->watermark) + goto out; + + ret = bmc150_accel_set_interrupt(data, BMC150_ACCEL_INT_WATERMARK, + true); + if (ret) + goto out; + + data->fifo_mode = BMC150_ACCEL_FIFO_MODE_FIFO; + + ret = bmc150_accel_fifo_set_mode(data); + if (ret) { + data->fifo_mode = 0; + bmc150_accel_set_interrupt(data, BMC150_ACCEL_INT_WATERMARK, + false); + } + +out: + mutex_unlock(&data->mutex); + + return ret; +} + +static int bmc150_accel_buffer_predisable(struct iio_dev *indio_dev) +{ + struct bmc150_accel_data *data = iio_priv(indio_dev); + + if (indio_dev->currentmode == INDIO_BUFFER_TRIGGERED) + return iio_triggered_buffer_predisable(indio_dev); + + mutex_lock(&data->mutex); + + if (!data->fifo_mode) + goto out; + + bmc150_accel_set_interrupt(data, BMC150_ACCEL_INT_WATERMARK, false); + __bmc150_accel_fifo_flush(indio_dev, BMC150_ACCEL_FIFO_LENGTH, false); + data->fifo_mode = 0; + bmc150_accel_fifo_set_mode(data); + +out: + mutex_unlock(&data->mutex); + + return 0; +} + +static const struct iio_buffer_setup_ops bmc150_accel_buffer_ops = { + .postenable = bmc150_accel_buffer_postenable, + .predisable = bmc150_accel_buffer_predisable, +}; + static int bmc150_accel_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -1278,8 +1642,8 @@ static int bmc150_accel_probe(struct i2c_client *client, if (client->irq >= 0) { ret = devm_request_threaded_irq( &client->dev, client->irq, - bmc150_accel_data_rdy_trig_poll, - bmc150_accel_event_handler, + bmc150_accel_irq_handler, + bmc150_accel_irq_thread_handler, IRQF_TRIGGER_RISING, BMC150_ACCEL_IRQ_NAME, indio_dev); @@ -1309,12 +1673,20 @@ static int bmc150_accel_probe(struct i2c_client *client, ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time, bmc150_accel_trigger_handler, - NULL); + &bmc150_accel_buffer_ops); if (ret < 0) { dev_err(&client->dev, "Failed: iio triggered buffer setup\n"); goto err_trigger_unregister; } + + if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C) || + i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_READ_I2C_BLOCK)) { + indio_dev->modes |= INDIO_BUFFER_SOFTWARE; + indio_dev->info = &bmc150_accel_info_fifo; + indio_dev->buffer->attrs = bmc150_accel_fifo_attributes; + } } ret = iio_device_register(indio_dev); @@ -1386,6 +1758,7 @@ static int bmc150_accel_resume(struct device *dev) mutex_lock(&data->mutex); if (atomic_read(&data->active_intr)) bmc150_accel_set_mode(data, BMC150_ACCEL_SLEEP_MODE_NORMAL, 0); + bmc150_accel_fifo_set_mode(data); mutex_unlock(&data->mutex); return 0; @@ -1419,6 +1792,9 @@ static int bmc150_accel_runtime_resume(struct device *dev) ret = bmc150_accel_set_mode(data, BMC150_ACCEL_SLEEP_MODE_NORMAL, 0); if (ret < 0) return ret; + ret = bmc150_accel_fifo_set_mode(data); + if (ret < 0) + return ret; sleep_val = bmc150_accel_get_startup_times(data); if (sleep_val < 20) |