diff options
| author | Ching-Te Ku <ku920601@realtek.com> | 2020-11-09 11:58:59 +0300 |
|---|---|---|
| committer | Kalle Valo <kvalo@codeaurora.org> | 2020-11-10 21:58:08 +0300 |
| commit | 3f3fef5f6a8ff96f1bd7fc65a76fbe4ccc87b14a (patch) | |
| tree | 41349582b73c14db3764e3f9601ad03321e431a2 /drivers/net/wireless/realtek/rtw88/rtw8822c.c | |
| parent | dd90fc4630d285db429e393522d7b3844fbf79e9 (diff) | |
| download | linux-3f3fef5f6a8ff96f1bd7fc65a76fbe4ccc87b14a.tar.xz | |
rtw88: coex: fixed some wrong register definition and setting
Some register definition and bit definition were incorrect.
e.g. REG_BT_COEX_V2 should be word alignment to meet the coding style.
e.g. set REG_BT_TDMA_TIME[5:0]=0x5,
But the original is to set REG_BT_TDMA_TIME[7:0]=0x5.
This will cause unexpected hardware behavior.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201109085909.9143-2-pkshih@realtek.com
Diffstat (limited to 'drivers/net/wireless/realtek/rtw88/rtw8822c.c')
| -rw-r--r-- | drivers/net/wireless/realtek/rtw88/rtw8822c.c | 10 |
1 files changed, 5 insertions, 5 deletions
diff --git a/drivers/net/wireless/realtek/rtw88/rtw8822c.c b/drivers/net/wireless/realtek/rtw88/rtw8822c.c index f58722a49ec6..56c403d628fd 100644 --- a/drivers/net/wireless/realtek/rtw88/rtw8822c.c +++ b/drivers/net/wireless/realtek/rtw88/rtw8822c.c @@ -2132,24 +2132,24 @@ static void rtw8822c_coex_cfg_init(struct rtw_dev *rtwdev) /* enable TBTT nterrupt */ rtw_write8_set(rtwdev, REG_BCN_CTRL, BIT_EN_BCN_FUNCTION); - /* BT report packet sample rate */ + /* BT report packet sample rate */ /* 0x790[5:0]=0x5 */ - rtw_write8_set(rtwdev, REG_BT_TDMA_TIME, 0x05); + rtw_write8_mask(rtwdev, REG_BT_TDMA_TIME, BIT_MASK_SAMPLE_RATE, 0x5); /* enable BT counter statistics */ rtw_write8(rtwdev, REG_BT_STAT_CTRL, 0x1); /* enable PTA (3-wire function form BT side) */ rtw_write32_set(rtwdev, REG_GPIO_MUXCFG, BIT_BT_PTA_EN); - rtw_write32_set(rtwdev, REG_GPIO_MUXCFG, BIT_BT_AOD_GPIO3); + rtw_write32_set(rtwdev, REG_GPIO_MUXCFG, BIT_PO_BT_PTA_PINS); /* enable PTA (tx/rx signal form WiFi side) */ rtw_write8_set(rtwdev, REG_QUEUE_CTRL, BIT_PTA_WL_TX_EN); /* wl tx signal to PTA not case EDCCA */ rtw_write8_clr(rtwdev, REG_QUEUE_CTRL, BIT_PTA_EDCCA_EN); /* GNT_BT=1 while select both */ - rtw_write8_set(rtwdev, REG_BT_COEX_V2, BIT_GNT_BT_POLARITY); - /* BT_CCA = ~GNT_WL_BB, (not or GNT_BT_BB, LTE_Rx */ + rtw_write16_set(rtwdev, REG_BT_COEX_V2, BIT_GNT_BT_POLARITY); + /* BT_CCA = ~GNT_WL_BB, not or GNT_BT_BB, LTE_Rx */ rtw_write8_clr(rtwdev, REG_DUMMY_PAGE4_V1, BIT_BTCCA_CTRL); /* to avoid RF parameter error */ |