rtw88: support adaptivity for ETSI/JP DFS region

Add Energy Detected CCA (EDCCA) mechanism to detect energy on the channel.
And EDCCA support adaptivity mode now. From MIC Ordinance Regulating Radio
Equipment article 49.20, ETSI EN-300-328 and EN-301-893, the device should
be able to dynamically pause TX activity when energy detected on the air.
According to ETSI/JP DFS region, driver will set corresponding threshold
and stop TX activity if the detected energy exceeds the threshold. For now,
we support it on 8822b and 8822c first.

By default, EDCCA mechanism is turned on. For ETSI/JP DFS region, it will
turn to adaptivity mode. However, with adaptivity, if environment is too
noisy, TX may often be halted. So, a debugfs for EDCCA is added. It can
show what EDCCA mode is used currently. And EDCCA mechanism can be turned
on/off through the debugfs while debugging.

Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210830072014.12250-4-pkshih@realtek.com

1 files changed, 47 insertions, 0 deletions

diff --git a/drivers/net/wireless/realtek/rtw88/rtw8822c.c b/drivers/net/wireless/realtek/rtw88/rtw8822c.c
index f3ad079967a6..46b881e8e4fe 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8822c.c
+++ b/drivers/net/wireless/realtek/rtw88/rtw8822c.c
@@ -4497,6 +4497,39 @@ static void rtw8822c_pwr_track(struct rtw_dev *rtwdev)
 	dm_info->pwr_trk_triggered = false;
 }
 
+static void rtw8822c_adaptivity_init(struct rtw_dev *rtwdev)
+{
+	rtw_phy_set_edcca_th(rtwdev, RTW8822C_EDCCA_MAX, RTW8822C_EDCCA_MAX);
+
+	/* mac edcca state setting */
+	rtw_write32_clr(rtwdev, REG_TX_PTCL_CTRL, BIT_DIS_EDCCA);
+	rtw_write32_set(rtwdev, REG_RD_CTRL, BIT_EDCCA_MSK_CNTDOWN_EN);
+
+	/* edcca decistion opt */
+	rtw_write32_clr(rtwdev, REG_EDCCA_DECISION, BIT_EDCCA_OPTION);
+}
+
+static void rtw8822c_adaptivity(struct rtw_dev *rtwdev)
+{
+	struct rtw_dm_info *dm_info = &rtwdev->dm_info;
+	s8 l2h, h2l;
+	u8 igi;
+
+	igi = dm_info->igi_history[0];
+	if (dm_info->edcca_mode == RTW_EDCCA_NORMAL) {
+		l2h = max_t(s8, igi + EDCCA_IGI_L2H_DIFF, EDCCA_TH_L2H_LB);
+		h2l = l2h - EDCCA_L2H_H2L_DIFF_NORMAL;
+	} else {
+		if (igi < dm_info->l2h_th_ini - EDCCA_ADC_BACKOFF)
+			l2h = igi + EDCCA_ADC_BACKOFF;
+		else
+			l2h = dm_info->l2h_th_ini;
+		h2l = l2h - EDCCA_L2H_H2L_DIFF;
+	}
+
+	rtw_phy_set_edcca_th(rtwdev, l2h, h2l);
+}
+
 static const struct rtw_pwr_seq_cmd trans_carddis_to_cardemu_8822c[] = {
 	{0x0086,
 	 RTW_PWR_CUT_ALL_MSK,
@@ -4912,6 +4945,8 @@ static struct rtw_chip_ops rtw8822c_ops = {
 	.config_bfee		= rtw8822c_bf_config_bfee,
 	.set_gid_table		= rtw_bf_set_gid_table,
 	.cfg_csi_rate		= rtw_bf_cfg_csi_rate,
+	.adaptivity_init	= rtw8822c_adaptivity_init,
+	.adaptivity		= rtw8822c_adaptivity,
 	.cfo_init		= rtw8822c_cfo_init,
 	.cfo_track		= rtw8822c_cfo_track,
 	.config_tx_path		= rtw8822c_config_tx_path,
@@ -5197,6 +5232,15 @@ static const struct rtw_pwr_track_tbl rtw8822c_rtw_pwr_track_tbl = {
 	.pwrtrk_2g_ccka_p = rtw8822c_pwrtrk_2g_cck_a_p,
 };
 
+static struct rtw_hw_reg_offset rtw8822c_edcca_th[] = {
+	[EDCCA_TH_L2H_IDX] = {
+		{.addr = 0x84c, .mask = MASKBYTE2}, .offset = 0x80
+	},
+	[EDCCA_TH_H2L_IDX] = {
+		{.addr = 0x84c, .mask = MASKBYTE3}, .offset = 0x80
+	},
+};
+
 #ifdef CONFIG_PM
 static const struct wiphy_wowlan_support rtw_wowlan_stub_8822c = {
 	.flags = WIPHY_WOWLAN_MAGIC_PKT | WIPHY_WOWLAN_GTK_REKEY_FAILURE |
@@ -5289,6 +5333,9 @@ struct rtw_chip_info rtw8822c_hw_spec = {
 	.bfer_mu_max_num = 1,
 	.rx_ldpc = true,
 	.tx_stbc = true,
+	.edcca_th = rtw8822c_edcca_th,
+	.l2h_th_ini_cs = 60,
+	.l2h_th_ini_ad = 45,
 
 #ifdef CONFIG_PM
 	.wow_fw_name = "rtw88/rtw8822c_wow_fw.bin",