remoteproc: Fix various kernel-doc warnings

Fix all the kernel-doc warnings in various remoteproc core files.
Some of them just needed a formatting cleanup change, while others
needed the Return statement to be added, or documenting the missed
structure elements.

Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suman Anna <s-anna@ti.com>
Link: https://lore.kernel.org/r/20210519180304.23563-3-s-anna@ti.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

1 files changed, 30 insertions, 14 deletions

diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index 8c279039b6a3..6348aaa42bbb 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -183,12 +183,12 @@ EXPORT_SYMBOL(rproc_va_to_pa);
  * translations on the internal remoteproc memory regions through a platform
  * implementation specific da_to_va ops, if present.
  *
- * The function returns a valid kernel address on success or NULL on failure.
- *
  * Note: phys_to_virt(iommu_iova_to_phys(rproc->domain, da)) will work too,
  * but only on kernel direct mapped RAM memory. Instead, we're just using
  * here the output of the DMA API for the carveouts, which should be more
  * correct.
+ *
+ * Return: a valid kernel address on success or NULL on failure
  */
 void *rproc_da_to_va(struct rproc *rproc, u64 da, size_t len, bool *is_iomem)
 {
@@ -509,7 +509,7 @@ static int copy_dma_range_map(struct device *to, struct device *from)
  * use RSC_DEVMEM resource entries to map their required @da to the physical
  * address of their base CMA region (ouch, hacky!).
  *
- * Returns 0 on success, or an appropriate error code otherwise
+ * Return: 0 on success, or an appropriate error code otherwise
  */
 static int rproc_handle_vdev(struct rproc *rproc, void *ptr,
 			     int offset, int avail)
@@ -644,7 +644,7 @@ void rproc_vdev_release(struct kref *ref)
  * support dynamically allocating this address using the generic
  * DMA API (but currently there isn't a use case for that).
  *
- * Returns 0 on success, or an appropriate error code otherwise
+ * Return: 0 on success, or an appropriate error code otherwise
  */
 static int rproc_handle_trace(struct rproc *rproc, void *ptr,
 			      int offset, int avail)
@@ -721,6 +721,8 @@ static int rproc_handle_trace(struct rproc *rproc, void *ptr,
  * tell us ranges of physical addresses the firmware is allowed to request,
  * and not allow firmwares to request access to physical addresses that
  * are outside those ranges.
+ *
+ * Return: 0 on success, or an appropriate error code otherwise
  */
 static int rproc_handle_devmem(struct rproc *rproc, void *ptr,
 			       int offset, int avail)
@@ -783,6 +785,8 @@ out:
  *
  * This function allocate specified memory entry @mem using
  * dma_alloc_coherent() as default allocator
+ *
+ * Return: 0 on success, or an appropriate error code otherwise
  */
 static int rproc_alloc_carveout(struct rproc *rproc,
 				struct rproc_mem_entry *mem)
@@ -889,6 +893,8 @@ dma_free:
  *
  * This function releases specified memory entry @mem allocated via
  * rproc_alloc_carveout() function by @rproc.
+ *
+ * Return: 0 on success, or an appropriate error code otherwise
  */
 static int rproc_release_carveout(struct rproc *rproc,
 				  struct rproc_mem_entry *mem)
@@ -918,6 +924,8 @@ static int rproc_release_carveout(struct rproc *rproc,
  * (e.g. CMA) more efficiently, and also minimizes the number of TLB entries
  * needed to map it (in case @rproc is using an IOMMU). Reducing the TLB
  * pressure is important; it may have a substantial impact on performance.
+ *
+ * Return: 0 on success, or an appropriate error code otherwise
  */
 static int rproc_handle_carveout(struct rproc *rproc,
 				 void *ptr, int offset, int avail)
@@ -1006,6 +1014,8 @@ EXPORT_SYMBOL(rproc_add_carveout);
  *
  * This function allocates a rproc_mem_entry struct and fill it with parameters
  * provided by client.
+ *
+ * Return: a valid pointer on success, or NULL on failure
  */
 __printf(8, 9)
 struct rproc_mem_entry *
@@ -1050,6 +1060,8 @@ EXPORT_SYMBOL(rproc_mem_entry_init);
  *
  * This function allocates a rproc_mem_entry struct and fill it with parameters
  * provided by client.
+ *
+ * Return: a valid pointer on success, or NULL on failure
  */
 __printf(5, 6)
 struct rproc_mem_entry *
@@ -1881,6 +1893,8 @@ static int __rproc_detach(struct rproc *rproc)
  * remoteproc functional again.
  *
  * This function can sleep, so it cannot be called from atomic context.
+ *
+ * Return: 0 on success or a negative value upon failure
  */
 int rproc_trigger_recovery(struct rproc *rproc)
 {
@@ -1965,7 +1979,7 @@ static void rproc_crash_handler_work(struct work_struct *work)
  * If the remote processor is already powered on, this function immediately
  * returns (successfully).
  *
- * Returns 0 on success, and an appropriate error value otherwise.
+ * Return: 0 on success, and an appropriate error value otherwise
  */
 int rproc_boot(struct rproc *rproc)
 {
@@ -2100,6 +2114,8 @@ EXPORT_SYMBOL(rproc_shutdown);
  * no longer available.  From there it should be possible to remove the
  * platform driver and even power cycle the application processor (if the HW
  * supports it) without needing to switch off the remote processor.
+ *
+ * Return: 0 on success, and an appropriate error value otherwise
  */
 int rproc_detach(struct rproc *rproc)
 {
@@ -2152,7 +2168,7 @@ EXPORT_SYMBOL(rproc_detach);
  * This function increments the remote processor's refcount, so always
  * use rproc_put() to decrement it back once rproc isn't needed anymore.
  *
- * Returns the rproc handle on success, and NULL on failure.
+ * Return: rproc handle on success, and NULL on failure
  */
 #ifdef CONFIG_OF
 struct rproc *rproc_get_by_phandle(phandle phandle)
@@ -2302,8 +2318,6 @@ static int rproc_validate(struct rproc *rproc)
  * This is called by the platform-specific rproc implementation, whenever
  * a new remote processor device is probed.
  *
- * Returns 0 on success and an appropriate error code otherwise.
- *
  * Note: this function initiates an asynchronous firmware loading
  * context, which will look for virtio devices supported by the rproc's
  * firmware.
@@ -2311,6 +2325,8 @@ static int rproc_validate(struct rproc *rproc)
  * If found, those virtio devices will be created and added, so as a result
  * of registering this remote processor, additional virtio drivers might be
  * probed.
+ *
+ * Return: 0 on success and an appropriate error code otherwise
  */
 int rproc_add(struct rproc *rproc)
 {
@@ -2364,7 +2380,7 @@ static void devm_rproc_remove(void *rproc)
  * This function performs like rproc_add() but the registered rproc device will
  * automatically be removed on driver detach.
  *
- * Returns: 0 on success, negative errno on failure
+ * Return: 0 on success, negative errno on failure
  */
 int devm_rproc_add(struct device *dev, struct rproc *rproc)
 {
@@ -2472,10 +2488,10 @@ static int rproc_alloc_ops(struct rproc *rproc, const struct rproc_ops *ops)
  * implementations should then call rproc_add() to complete
  * the registration of the remote processor.
  *
- * On success the new rproc is returned, and on failure, NULL.
- *
  * Note: _never_ directly deallocate @rproc, even if it was not registered
  * yet. Instead, when you need to unroll rproc_alloc(), use rproc_free().
+ *
+ * Return: new rproc pointer on success, and NULL on failure
  */
 struct rproc *rproc_alloc(struct device *dev, const char *name,
 			  const struct rproc_ops *ops,
@@ -2588,7 +2604,7 @@ EXPORT_SYMBOL(rproc_put);
  * of the outstanding reference created by rproc_alloc. To decrement that
  * one last refcount, one still needs to call rproc_free().
  *
- * Returns 0 on success and -EINVAL if @rproc isn't valid.
+ * Return: 0 on success and -EINVAL if @rproc isn't valid
  */
 int rproc_del(struct rproc *rproc)
 {
@@ -2635,7 +2651,7 @@ static void devm_rproc_free(struct device *dev, void *res)
  * This function performs like rproc_alloc() but the acquired rproc device will
  * automatically be released on driver detach.
  *
- * Returns: new rproc instance, or NULL on failure
+ * Return: new rproc instance, or NULL on failure
  */
 struct rproc *devm_rproc_alloc(struct device *dev, const char *name,
 			       const struct rproc_ops *ops,
@@ -2687,7 +2703,7 @@ EXPORT_SYMBOL(rproc_remove_subdev);
  * rproc_get_by_child() - acquire rproc handle of @dev's ancestor
  * @dev:	child device to find ancestor of
  *
- * Returns the ancestor rproc instance, or NULL if not found.
+ * Return: the ancestor rproc instance, or NULL if not found
  */
 struct rproc *rproc_get_by_child(struct device *dev)
 {