scsi: be2iscsi: Move functions to right files

beiscsi_fail_session is defined in be_cmds.c: move it to be_iscsi.c
Move card configuration commands to be_cmds.c.

Signed-off-by: Jitendra Bhivare <jitendra.bhivare@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

1 files changed, 0 insertions, 261 deletions

diff --git a/drivers/scsi/be2iscsi/be_mgmt.c b/drivers/scsi/be2iscsi/be_mgmt.c
index 08d94b014459..706a817b8313 100644
--- a/drivers/scsi/be2iscsi/be_mgmt.c
+++ b/drivers/scsi/be2iscsi/be_mgmt.c
@@ -189,267 +189,6 @@ int beiscsi_modify_eq_delay(struct beiscsi_hba *phba,
 	return tag;
 }
 
-/**
- * mgmt_get_port_name()- Get port name for the function
- * @ctrl: ptr to Ctrl Info
- * @phba: ptr to the dev priv structure
- *
- * Get the alphanumeric character for port
- *
- **/
-int mgmt_get_port_name(struct be_ctrl_info *ctrl,
-		       struct beiscsi_hba *phba)
-{
-	int ret = 0;
-	struct be_mcc_wrb *wrb;
-	struct be_cmd_get_port_name *ioctl;
-
-	mutex_lock(&ctrl->mbox_lock);
-	wrb = wrb_from_mbox(&ctrl->mbox_mem);
-	memset(wrb, 0, sizeof(*wrb));
-	ioctl = embedded_payload(wrb);
-
-	be_wrb_hdr_prepare(wrb, sizeof(*ioctl), true, 0);
-	be_cmd_hdr_prepare(&ioctl->h.req_hdr, CMD_SUBSYSTEM_COMMON,
-			   OPCODE_COMMON_GET_PORT_NAME,
-			   EMBED_MBX_MAX_PAYLOAD_SIZE);
-	ret = be_mbox_notify(ctrl);
-	phba->port_name = 0;
-	if (!ret) {
-		phba->port_name = ioctl->p.resp.port_names >>
-				  (phba->fw_config.phys_port * 8) & 0xff;
-	} else {
-		beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_INIT,
-			    "BG_%d : GET_PORT_NAME ret 0x%x status 0x%x\n",
-			    ret, ioctl->h.resp_hdr.status);
-	}
-
-	if (phba->port_name == 0)
-		phba->port_name = '?';
-
-	mutex_unlock(&ctrl->mbox_lock);
-	return ret;
-}
-
-/**
- * mgmt_get_fw_config()- Get the FW config for the function
- * @ctrl: ptr to Ctrl Info
- * @phba: ptr to the dev priv structure
- *
- * Get the FW config and resources available for the function.
- * The resources are created based on the count received here.
- *
- * return
- *	Success: 0
- *	Failure: Non-Zero Value
- **/
-int mgmt_get_fw_config(struct be_ctrl_info *ctrl,
-				struct beiscsi_hba *phba)
-{
-	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
-	struct be_fw_cfg *pfw_cfg = embedded_payload(wrb);
-	uint32_t cid_count, icd_count;
-	int status = -EINVAL;
-	uint8_t ulp_num = 0;
-
-	mutex_lock(&ctrl->mbox_lock);
-	memset(wrb, 0, sizeof(*wrb));
-	be_wrb_hdr_prepare(wrb, sizeof(*pfw_cfg), true, 0);
-
-	be_cmd_hdr_prepare(&pfw_cfg->hdr, CMD_SUBSYSTEM_COMMON,
-			   OPCODE_COMMON_QUERY_FIRMWARE_CONFIG,
-			   EMBED_MBX_MAX_PAYLOAD_SIZE);
-
-	if (be_mbox_notify(ctrl)) {
-		beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
-			    "BG_%d : Failed in mgmt_get_fw_config\n");
-		goto fail_init;
-	}
-
-	/* FW response formats depend on port id */
-	phba->fw_config.phys_port = pfw_cfg->phys_port;
-	if (phba->fw_config.phys_port >= BEISCSI_PHYS_PORT_MAX) {
-		beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
-			    "BG_%d : invalid physical port id %d\n",
-			    phba->fw_config.phys_port);
-		goto fail_init;
-	}
-
-	/* populate and check FW config against min and max values */
-	if (!is_chip_be2_be3r(phba)) {
-		phba->fw_config.eqid_count = pfw_cfg->eqid_count;
-		phba->fw_config.cqid_count = pfw_cfg->cqid_count;
-		if (phba->fw_config.eqid_count == 0 ||
-		    phba->fw_config.eqid_count > 2048) {
-			beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
-				    "BG_%d : invalid EQ count %d\n",
-				    phba->fw_config.eqid_count);
-			goto fail_init;
-		}
-		if (phba->fw_config.cqid_count == 0 ||
-		    phba->fw_config.cqid_count > 4096) {
-			beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
-				    "BG_%d : invalid CQ count %d\n",
-				    phba->fw_config.cqid_count);
-			goto fail_init;
-		}
-		beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_INIT,
-			    "BG_%d : EQ_Count : %d CQ_Count : %d\n",
-			    phba->fw_config.eqid_count,
-			    phba->fw_config.cqid_count);
-	}
-
-	/**
-	 * Check on which all ULP iSCSI Protocol is loaded.
-	 * Set the Bit for those ULP. This set flag is used
-	 * at all places in the code to check on which ULP
-	 * iSCSi Protocol is loaded
-	 **/
-	for (ulp_num = 0; ulp_num < BEISCSI_ULP_COUNT; ulp_num++) {
-		if (pfw_cfg->ulp[ulp_num].ulp_mode &
-		    BEISCSI_ULP_ISCSI_INI_MODE) {
-			set_bit(ulp_num, &phba->fw_config.ulp_supported);
-
-			/* Get the CID, ICD and Chain count for each ULP */
-			phba->fw_config.iscsi_cid_start[ulp_num] =
-				pfw_cfg->ulp[ulp_num].sq_base;
-			phba->fw_config.iscsi_cid_count[ulp_num] =
-				pfw_cfg->ulp[ulp_num].sq_count;
-
-			phba->fw_config.iscsi_icd_start[ulp_num] =
-				pfw_cfg->ulp[ulp_num].icd_base;
-			phba->fw_config.iscsi_icd_count[ulp_num] =
-				pfw_cfg->ulp[ulp_num].icd_count;
-
-			phba->fw_config.iscsi_chain_start[ulp_num] =
-				pfw_cfg->chain_icd[ulp_num].chain_base;
-			phba->fw_config.iscsi_chain_count[ulp_num] =
-				pfw_cfg->chain_icd[ulp_num].chain_count;
-
-			beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_INIT,
-				    "BG_%d : Function loaded on ULP : %d\n"
-				    "\tiscsi_cid_count : %d\n"
-				    "\tiscsi_cid_start : %d\n"
-				    "\t iscsi_icd_count : %d\n"
-				    "\t iscsi_icd_start : %d\n",
-				    ulp_num,
-				    phba->fw_config.
-				    iscsi_cid_count[ulp_num],
-				    phba->fw_config.
-				    iscsi_cid_start[ulp_num],
-				    phba->fw_config.
-				    iscsi_icd_count[ulp_num],
-				    phba->fw_config.
-				    iscsi_icd_start[ulp_num]);
-		}
-	}
-
-	if (phba->fw_config.ulp_supported == 0) {
-		beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
-			    "BG_%d : iSCSI initiator mode not set: ULP0 %x ULP1 %x\n",
-			    pfw_cfg->ulp[BEISCSI_ULP0].ulp_mode,
-			    pfw_cfg->ulp[BEISCSI_ULP1].ulp_mode);
-		goto fail_init;
-	}
-
-	/**
-	 * ICD is shared among ULPs. Use icd_count of any one loaded ULP
-	 **/
-	for (ulp_num = 0; ulp_num < BEISCSI_ULP_COUNT; ulp_num++)
-		if (test_bit(ulp_num, &phba->fw_config.ulp_supported))
-			break;
-	icd_count = phba->fw_config.iscsi_icd_count[ulp_num];
-	if (icd_count == 0 || icd_count > 65536) {
-		beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
-			    "BG_%d: invalid ICD count %d\n", icd_count);
-		goto fail_init;
-	}
-
-	cid_count = BEISCSI_GET_CID_COUNT(phba, BEISCSI_ULP0) +
-		    BEISCSI_GET_CID_COUNT(phba, BEISCSI_ULP1);
-	if (cid_count == 0 || cid_count > 4096) {
-		beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
-			    "BG_%d: invalid CID count %d\n", cid_count);
-		goto fail_init;
-	}
-
-	/**
-	 * Check FW is dual ULP aware i.e. can handle either
-	 * of the protocols.
-	 */
-	phba->fw_config.dual_ulp_aware = (pfw_cfg->function_mode &
-					  BEISCSI_FUNC_DUA_MODE);
-
-	beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_INIT,
-		    "BG_%d : DUA Mode : 0x%x\n",
-		    phba->fw_config.dual_ulp_aware);
-
-	/* all set, continue using this FW config */
-	status = 0;
-fail_init:
-	mutex_unlock(&ctrl->mbox_lock);
-	return status;
-}
-
-int mgmt_check_supported_fw(struct be_ctrl_info *ctrl,
-				      struct beiscsi_hba *phba)
-{
-	struct be_dma_mem nonemb_cmd;
-	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
-	struct be_mgmt_controller_attributes *req;
-	struct be_sge *sge = nonembedded_sgl(wrb);
-	int status = 0;
-
-	nonemb_cmd.va = pci_alloc_consistent(ctrl->pdev,
-				sizeof(struct be_mgmt_controller_attributes),
-				&nonemb_cmd.dma);
-	if (nonemb_cmd.va == NULL) {
-		beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
-			    "BG_%d : Failed to allocate memory for "
-			    "mgmt_check_supported_fw\n");
-		return -ENOMEM;
-	}
-	nonemb_cmd.size = sizeof(struct be_mgmt_controller_attributes);
-	req = nonemb_cmd.va;
-	memset(req, 0, sizeof(*req));
-	mutex_lock(&ctrl->mbox_lock);
-	memset(wrb, 0, sizeof(*wrb));
-	be_wrb_hdr_prepare(wrb, sizeof(*req), false, 1);
-	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
-			   OPCODE_COMMON_GET_CNTL_ATTRIBUTES, sizeof(*req));
-	sge->pa_hi = cpu_to_le32(upper_32_bits(nonemb_cmd.dma));
-	sge->pa_lo = cpu_to_le32(nonemb_cmd.dma & 0xFFFFFFFF);
-	sge->len = cpu_to_le32(nonemb_cmd.size);
-	status = be_mbox_notify(ctrl);
-	if (!status) {
-		struct be_mgmt_controller_attributes_resp *resp = nonemb_cmd.va;
-		beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_INIT,
-			    "BG_%d : Firmware Version of CMD : %s\n"
-			    "Firmware Version is : %s\n"
-			    "Developer Build, not performing version check...\n",
-			    resp->params.hba_attribs
-			    .flashrom_version_string,
-			    resp->params.hba_attribs.
-			    firmware_version_string);
-
-		phba->fw_config.iscsi_features =
-				resp->params.hba_attribs.iscsi_features;
-		beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_INIT,
-			    "BM_%d : phba->fw_config.iscsi_features = %d\n",
-			    phba->fw_config.iscsi_features);
-		memcpy(phba->fw_ver_str, resp->params.hba_attribs.
-		       firmware_version_string, BEISCSI_VER_STRLEN);
-	} else
-		beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
-			    "BG_%d :  Failed in mgmt_check_supported_fw\n");
-	mutex_unlock(&ctrl->mbox_lock);
-	if (nonemb_cmd.va)
-		pci_free_consistent(ctrl->pdev, nonemb_cmd.size,
-				    nonemb_cmd.va, nonemb_cmd.dma);
-
-	return status;
-}
-
 unsigned int mgmt_vendor_specific_fw_cmd(struct be_ctrl_info *ctrl,
 					 struct beiscsi_hba *phba,
 					 struct bsg_job *job,