media: av7110: move to staging/media/deprecated/saa7146

The av7110 driver depends on saa7146, so move it there.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

1 files changed, 0 insertions, 496 deletions

diff --git a/drivers/staging/media/av7110/av7110_hw.h b/drivers/staging/media/av7110/av7110_hw.h
deleted file mode 100644
index 6380d8950c69..000000000000
--- a/drivers/staging/media/av7110/av7110_hw.h
+++ /dev/null
@@ -1,496 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _AV7110_HW_H_
-#define _AV7110_HW_H_
-
-#include "av7110.h"
-
-/* DEBI transfer mode defs */
-
-#define DEBINOSWAP 0x000e0000
-#define DEBISWAB   0x001e0000
-#define DEBISWAP   0x002e0000
-
-#define ARM_WAIT_FREE  (HZ)
-#define ARM_WAIT_SHAKE (HZ/5)
-#define ARM_WAIT_OSD (HZ)
-
-
-enum av7110_bootstate
-{
-	BOOTSTATE_BUFFER_EMPTY	= 0,
-	BOOTSTATE_BUFFER_FULL	= 1,
-	BOOTSTATE_AV7110_BOOT_COMPLETE	= 2
-};
-
-enum av7110_type_rec_play_format
-{	RP_None,
-	AudioPES,
-	AudioMp2,
-	AudioPCM,
-	VideoPES,
-	AV_PES
-};
-
-enum av7110_osd_palette_type
-{
-	NoPalet =  0,	   /* No palette */
-	Pal1Bit =  2,	   /* 2 colors for 1 Bit Palette    */
-	Pal2Bit =  4,	   /* 4 colors for 2 bit palette    */
-	Pal4Bit =  16,	   /* 16 colors for 4 bit palette   */
-	Pal8Bit =  256	   /* 256 colors for 16 bit palette */
-};
-
-/* switch defines */
-#define SB_GPIO 3
-#define SB_OFF	SAA7146_GPIO_OUTLO  /* SlowBlank off (TV-Mode) */
-#define SB_ON	SAA7146_GPIO_INPUT  /* SlowBlank on  (AV-Mode) */
-#define SB_WIDE SAA7146_GPIO_OUTHI  /* SlowBlank 6V  (16/9-Mode) (not implemented) */
-
-#define FB_GPIO 1
-#define FB_OFF	SAA7146_GPIO_LO     /* FastBlank off (CVBS-Mode) */
-#define FB_ON	SAA7146_GPIO_OUTHI  /* FastBlank on  (RGB-Mode) */
-#define FB_LOOP	SAA7146_GPIO_INPUT  /* FastBlank loop-through (PC graphics ???) */
-
-enum av7110_video_output_mode
-{
-	NO_OUT	     = 0,		/* disable analog output */
-	CVBS_RGB_OUT = 1,
-	CVBS_YC_OUT  = 2,
-	YC_OUT	     = 3
-};
-
-/* firmware internal msg q status: */
-#define GPMQFull	0x0001		/* Main Message Queue Full */
-#define GPMQOver	0x0002		/* Main Message Queue Overflow */
-#define HPQFull		0x0004		/* High Priority Msg Queue Full */
-#define HPQOver		0x0008
-#define OSDQFull	0x0010		/* OSD Queue Full */
-#define OSDQOver	0x0020
-#define GPMQBusy	0x0040		/* Queue not empty, FW >= 261d */
-#define HPQBusy		0x0080
-#define OSDQBusy	0x0100
-
-/* hw section filter flags */
-#define	SECTION_EIT		0x01
-#define	SECTION_SINGLE		0x00
-#define	SECTION_CYCLE		0x02
-#define	SECTION_CONTINUOS	0x04
-#define	SECTION_MODE		0x06
-#define SECTION_IPMPE		0x0C	/* size up to 4k */
-#define SECTION_HIGH_SPEED	0x1C	/* larger buffer */
-#define DATA_PIPING_FLAG	0x20	/* for Data Piping Filter */
-
-#define	PBUFSIZE_NONE 0x0000
-#define	PBUFSIZE_1P   0x0100
-#define	PBUFSIZE_2P   0x0200
-#define	PBUFSIZE_1K   0x0300
-#define	PBUFSIZE_2K   0x0400
-#define	PBUFSIZE_4K   0x0500
-#define	PBUFSIZE_8K   0x0600
-#define PBUFSIZE_16K  0x0700
-#define PBUFSIZE_32K  0x0800
-
-
-/* firmware command codes */
-enum av7110_osd_command {
-	WCreate,
-	WDestroy,
-	WMoveD,
-	WMoveA,
-	WHide,
-	WTop,
-	DBox,
-	DLine,
-	DText,
-	Set_Font,
-	SetColor,
-	SetBlend,
-	SetWBlend,
-	SetCBlend,
-	SetNonBlend,
-	LoadBmp,
-	BlitBmp,
-	ReleaseBmp,
-	SetWTrans,
-	SetWNoTrans,
-	Set_Palette
-};
-
-enum av7110_pid_command {
-	MultiPID,
-	VideoPID,
-	AudioPID,
-	InitFilt,
-	FiltError,
-	NewVersion,
-	CacheError,
-	AddPIDFilter,
-	DelPIDFilter,
-	Scan,
-	SetDescr,
-	SetIR,
-	FlushTSQueue
-};
-
-enum av7110_mpeg_command {
-	SelAudChannels
-};
-
-enum av7110_audio_command {
-	AudioDAC,
-	CabADAC,
-	ON22K,
-	OFF22K,
-	MainSwitch,
-	ADSwitch,
-	SendDiSEqC,
-	SetRegister,
-	SpdifSwitch
-};
-
-enum av7110_request_command {
-	AudioState,
-	AudioBuffState,
-	VideoState1,
-	VideoState2,
-	VideoState3,
-	CrashCounter,
-	ReqVersion,
-	ReqVCXO,
-	ReqRegister,
-	ReqSecFilterError,
-	ReqSTC
-};
-
-enum av7110_encoder_command {
-	SetVidMode,
-	SetTestMode,
-	LoadVidCode,
-	SetMonitorType,
-	SetPanScanType,
-	SetFreezeMode,
-	SetWSSConfig
-};
-
-enum av7110_rec_play_state {
-	__Record,
-	__Stop,
-	__Play,
-	__Pause,
-	__Slow,
-	__FF_IP,
-	__Scan_I,
-	__Continue
-};
-
-enum av7110_fw_cmd_misc {
-	AV7110_FW_VIDEO_ZOOM = 1,
-	AV7110_FW_VIDEO_COMMAND,
-	AV7110_FW_AUDIO_COMMAND
-};
-
-enum av7110_command_type {
-	COMTYPE_NOCOM,
-	COMTYPE_PIDFILTER,
-	COMTYPE_MPEGDECODER,
-	COMTYPE_OSD,
-	COMTYPE_BMP,
-	COMTYPE_ENCODER,
-	COMTYPE_AUDIODAC,
-	COMTYPE_REQUEST,
-	COMTYPE_SYSTEM,
-	COMTYPE_REC_PLAY,
-	COMTYPE_COMMON_IF,
-	COMTYPE_PID_FILTER,
-	COMTYPE_PES,
-	COMTYPE_TS,
-	COMTYPE_VIDEO,
-	COMTYPE_AUDIO,
-	COMTYPE_CI_LL,
-	COMTYPE_MISC = 0x80
-};
-
-#define VID_NONE_PREF		0x00	/* No aspect ration processing preferred */
-#define VID_PAN_SCAN_PREF	0x01	/* Pan and Scan Display preferred */
-#define VID_VERT_COMP_PREF	0x02	/* Vertical compression display preferred */
-#define VID_VC_AND_PS_PREF	0x03	/* PanScan and vertical Compression if allowed */
-#define VID_CENTRE_CUT_PREF	0x05	/* PanScan with zero vector */
-
-/* MPEG video decoder commands */
-#define AV_VIDEO_CMD_STOP	0x000e
-#define AV_VIDEO_CMD_PLAY	0x000d
-#define AV_VIDEO_CMD_FREEZE	0x0102
-#define AV_VIDEO_CMD_FFWD	0x0016
-#define AV_VIDEO_CMD_SLOW	0x0022
-
-/* MPEG audio decoder commands */
-#define AUDIO_CMD_MUTE		0x0001
-#define AUDIO_CMD_UNMUTE	0x0002
-#define AUDIO_CMD_PCM16		0x0010
-#define AUDIO_CMD_STEREO	0x0080
-#define AUDIO_CMD_MONO_L	0x0100
-#define AUDIO_CMD_MONO_R	0x0200
-#define AUDIO_CMD_SYNC_OFF	0x000e
-#define AUDIO_CMD_SYNC_ON	0x000f
-
-/* firmware data interface codes */
-#define DATA_NONE		 0x00
-#define DATA_FSECTION		 0x01
-#define DATA_IPMPE		 0x02
-#define DATA_MPEG_RECORD	 0x03
-#define DATA_DEBUG_MESSAGE	 0x04
-#define DATA_COMMON_INTERFACE	 0x05
-#define DATA_MPEG_PLAY		 0x06
-#define DATA_BMP_LOAD		 0x07
-#define DATA_IRCOMMAND		 0x08
-#define DATA_PIPING		 0x09
-#define DATA_STREAMING		 0x0a
-#define DATA_CI_GET		 0x0b
-#define DATA_CI_PUT		 0x0c
-#define DATA_MPEG_VIDEO_EVENT	 0x0d
-
-#define DATA_PES_RECORD		 0x10
-#define DATA_PES_PLAY		 0x11
-#define DATA_TS_RECORD		 0x12
-#define DATA_TS_PLAY		 0x13
-
-/* ancient CI command codes, only two are actually still used
- * by the link level CI firmware */
-#define CI_CMD_ERROR		 0x00
-#define CI_CMD_ACK		 0x01
-#define CI_CMD_SYSTEM_READY	 0x02
-#define CI_CMD_KEYPRESS		 0x03
-#define CI_CMD_ON_TUNED		 0x04
-#define CI_CMD_ON_SWITCH_PROGRAM 0x05
-#define CI_CMD_SECTION_ARRIVED	 0x06
-#define CI_CMD_SECTION_TIMEOUT	 0x07
-#define CI_CMD_TIME		 0x08
-#define CI_CMD_ENTER_MENU	 0x09
-#define CI_CMD_FAST_PSI		 0x0a
-#define CI_CMD_GET_SLOT_INFO	 0x0b
-
-#define CI_MSG_NONE		 0x00
-#define CI_MSG_CI_INFO		 0x01
-#define CI_MSG_MENU		 0x02
-#define CI_MSG_LIST		 0x03
-#define CI_MSG_TEXT		 0x04
-#define CI_MSG_REQUEST_INPUT	 0x05
-#define CI_MSG_INPUT_COMPLETE	 0x06
-#define CI_MSG_LIST_MORE	 0x07
-#define CI_MSG_MENU_MORE	 0x08
-#define CI_MSG_CLOSE_MMI_IMM	 0x09
-#define CI_MSG_SECTION_REQUEST	 0x0a
-#define CI_MSG_CLOSE_FILTER	 0x0b
-#define CI_PSI_COMPLETE		 0x0c
-#define CI_MODULE_READY		 0x0d
-#define CI_SWITCH_PRG_REPLY	 0x0e
-#define CI_MSG_TEXT_MORE	 0x0f
-
-#define CI_MSG_CA_PMT		 0xe0
-#define CI_MSG_ERROR		 0xf0
-
-
-/* base address of the dual ported RAM which serves as communication
- * area between PCI bus and av7110,
- * as seen by the DEBI bus of the saa7146 */
-#define	DPRAM_BASE 0x4000
-
-/* boot protocol area */
-#define AV7110_BOOT_STATE	(DPRAM_BASE + 0x3F8)
-#define AV7110_BOOT_SIZE	(DPRAM_BASE + 0x3FA)
-#define AV7110_BOOT_BASE	(DPRAM_BASE + 0x3FC)
-#define AV7110_BOOT_BLOCK	(DPRAM_BASE + 0x400)
-#define AV7110_BOOT_MAX_SIZE	0xc00
-
-/* firmware command protocol area */
-#define IRQ_STATE	(DPRAM_BASE + 0x0F4)
-#define IRQ_STATE_EXT	(DPRAM_BASE + 0x0F6)
-#define MSGSTATE	(DPRAM_BASE + 0x0F8)
-#define COMMAND		(DPRAM_BASE + 0x0FC)
-#define COM_BUFF	(DPRAM_BASE + 0x100)
-#define COM_BUFF_SIZE	0x20
-
-/* various data buffers */
-#define BUFF1_BASE	(DPRAM_BASE + 0x120)
-#define BUFF1_SIZE	0xE0
-
-#define DATA_BUFF0_BASE	(DPRAM_BASE + 0x200)
-#define DATA_BUFF0_SIZE	0x0800
-
-#define DATA_BUFF1_BASE	(DATA_BUFF0_BASE+DATA_BUFF0_SIZE)
-#define DATA_BUFF1_SIZE	0x0800
-
-#define DATA_BUFF2_BASE	(DATA_BUFF1_BASE+DATA_BUFF1_SIZE)
-#define DATA_BUFF2_SIZE	0x0800
-
-#define DATA_BUFF3_BASE (DATA_BUFF2_BASE+DATA_BUFF2_SIZE)
-#define DATA_BUFF3_SIZE 0x0400
-
-#define Reserved	(DPRAM_BASE + 0x1E00)
-#define Reserved_SIZE	0x1C0
-
-
-/* firmware status area */
-#define STATUS_BASE	(DPRAM_BASE + 0x1FC0)
-#define STATUS_LOOPS	(STATUS_BASE + 0x08)
-
-#define STATUS_MPEG_WIDTH     (STATUS_BASE + 0x0C)
-/* ((aspect_ratio & 0xf) << 12) | (height & 0xfff) */
-#define STATUS_MPEG_HEIGHT_AR (STATUS_BASE + 0x0E)
-
-/* firmware data protocol area */
-#define RX_TYPE		(DPRAM_BASE + 0x1FE8)
-#define RX_LEN		(DPRAM_BASE + 0x1FEA)
-#define TX_TYPE		(DPRAM_BASE + 0x1FEC)
-#define TX_LEN		(DPRAM_BASE + 0x1FEE)
-
-#define RX_BUFF		(DPRAM_BASE + 0x1FF4)
-#define TX_BUFF		(DPRAM_BASE + 0x1FF6)
-
-#define HANDSHAKE_REG	(DPRAM_BASE + 0x1FF8)
-#define COM_IF_LOCK	(DPRAM_BASE + 0x1FFA)
-
-#define IRQ_RX		(DPRAM_BASE + 0x1FFC)
-#define IRQ_TX		(DPRAM_BASE + 0x1FFE)
-
-/* used by boot protocol to load firmware into av7110 DRAM */
-#define DRAM_START_CODE		0x2e000404
-#define DRAM_MAX_CODE_SIZE	0x00100000
-
-/* saa7146 gpio lines */
-#define RESET_LINE		2
-#define DEBI_DONE_LINE		1
-#define ARM_IRQ_LINE		0
-
-
-
-extern int av7110_bootarm(struct av7110 *av7110);
-extern int av7110_firmversion(struct av7110 *av7110);
-#define FW_CI_LL_SUPPORT(arm_app) ((arm_app) & 0x80000000)
-#define FW_4M_SDRAM(arm_app)      ((arm_app) & 0x40000000)
-#define FW_VERSION(arm_app)	  ((arm_app) & 0x0000FFFF)
-
-extern int av7110_wait_msgstate(struct av7110 *av7110, u16 flags);
-extern int av7110_fw_cmd(struct av7110 *av7110, int type, int com, int num, ...);
-extern int av7110_fw_request(struct av7110 *av7110, u16 *request_buf,
-			     int request_buf_len, u16 *reply_buf, int reply_buf_len);
-
-
-/* DEBI (saa7146 data extension bus interface) access */
-extern int av7110_debiwrite(struct av7110 *av7110, u32 config,
-			    int addr, u32 val, unsigned int count);
-extern u32 av7110_debiread(struct av7110 *av7110, u32 config,
-			   int addr, unsigned int count);
-
-
-/* DEBI during interrupt */
-/* single word writes */
-static inline void iwdebi(struct av7110 *av7110, u32 config, int addr, u32 val, unsigned int count)
-{
-	av7110_debiwrite(av7110, config, addr, val, count);
-}
-
-/* buffer writes */
-static inline void mwdebi(struct av7110 *av7110, u32 config, int addr,
-			  const u8 *val, int count)
-{
-	memcpy(av7110->debi_virt, val, count);
-	av7110_debiwrite(av7110, config, addr, 0, count);
-}
-
-static inline u32 irdebi(struct av7110 *av7110, u32 config, int addr, u32 val, unsigned int count)
-{
-	u32 res;
-
-	res=av7110_debiread(av7110, config, addr, count);
-	if (count<=4)
-		memcpy(av7110->debi_virt, (char *) &res, count);
-	return res;
-}
-
-/* DEBI outside interrupts, only for count <= 4! */
-static inline void wdebi(struct av7110 *av7110, u32 config, int addr, u32 val, unsigned int count)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&av7110->debilock, flags);
-	av7110_debiwrite(av7110, config, addr, val, count);
-	spin_unlock_irqrestore(&av7110->debilock, flags);
-}
-
-static inline u32 rdebi(struct av7110 *av7110, u32 config, int addr, u32 val, unsigned int count)
-{
-	unsigned long flags;
-	u32 res;
-
-	spin_lock_irqsave(&av7110->debilock, flags);
-	res=av7110_debiread(av7110, config, addr, count);
-	spin_unlock_irqrestore(&av7110->debilock, flags);
-	return res;
-}
-
-/* handle mailbox registers of the dual ported RAM */
-static inline void ARM_ResetMailBox(struct av7110 *av7110)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&av7110->debilock, flags);
-	av7110_debiread(av7110, DEBINOSWAP, IRQ_RX, 2);
-	av7110_debiwrite(av7110, DEBINOSWAP, IRQ_RX, 0, 2);
-	spin_unlock_irqrestore(&av7110->debilock, flags);
-}
-
-static inline void ARM_ClearMailBox(struct av7110 *av7110)
-{
-	iwdebi(av7110, DEBINOSWAP, IRQ_RX, 0, 2);
-}
-
-static inline void ARM_ClearIrq(struct av7110 *av7110)
-{
-	irdebi(av7110, DEBINOSWAP, IRQ_RX, 0, 2);
-}
-
-/****************************************************************************
- * Firmware commands
- ****************************************************************************/
-
-static inline int SendDAC(struct av7110 *av7110, u8 addr, u8 data)
-{
-	return av7110_fw_cmd(av7110, COMTYPE_AUDIODAC, AudioDAC, 2, addr, data);
-}
-
-static inline int av7710_set_video_mode(struct av7110 *av7110, int mode)
-{
-	return av7110_fw_cmd(av7110, COMTYPE_ENCODER, SetVidMode, 1, mode);
-}
-
-static inline int vidcom(struct av7110 *av7110, u32 com, u32 arg)
-{
-	return av7110_fw_cmd(av7110, COMTYPE_MISC, AV7110_FW_VIDEO_COMMAND, 4,
-			     (com>>16), (com&0xffff),
-			     (arg>>16), (arg&0xffff));
-}
-
-static inline int audcom(struct av7110 *av7110, u32 com)
-{
-	return av7110_fw_cmd(av7110, COMTYPE_MISC, AV7110_FW_AUDIO_COMMAND, 2,
-			     (com>>16), (com&0xffff));
-}
-
-static inline int Set22K(struct av7110 *av7110, int state)
-{
-	return av7110_fw_cmd(av7110, COMTYPE_AUDIODAC, (state ? ON22K : OFF22K), 0);
-}
-
-
-extern int av7110_diseqc_send(struct av7110 *av7110, int len, u8 *msg, unsigned long burst);
-
-
-#ifdef CONFIG_DVB_AV7110_OSD
-extern int av7110_osd_cmd(struct av7110 *av7110, osd_cmd_t *dc);
-extern int av7110_osd_capability(struct av7110 *av7110, osd_cap_t *cap);
-#endif /* CONFIG_DVB_AV7110_OSD */
-
-
-
-#endif /* _AV7110_HW_H_ */