Merge tag 'usb-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

USB: Changes for v5.4 merge window

With only 45 non-merge commits, we have a small merge window from the
Gadget perspective.

The biggest change here is the addition of the Cadence USB3 DRD
Driver. All other changes are small, non-critical fixes or smaller new
features like the improvement to BESL handling in dwc3.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

* tag 'usb-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (45 commits)
  usb: gadget: net2280: Add workaround for AB chip Errata 11
  usb: gadget: net2280: Move all "ll" registers in one structure
  usb: dwc3: gadget: Workaround Mirosoft's BESL check
  usb:cdns3 Fix for stuck packets in on-chip OUT buffer.
  usb: cdns3: Add Cadence USB3 DRD Driver
  usb: common: Simplify usb_decode_get_set_descriptor function.
  usb: common: Patch simplify usb_decode_set_clear_feature function.
  usb: common: Separated decoding functions from dwc3 driver.
  dt-bindings: add binding for USBSS-DRD controller.
  usb: gadget: composite: Set recommended BESL values
  usb: dwc3: gadget: Set BESL config parameter
  usb: dwc3: Separate field holding multiple properties
  usb: gadget: Export recommended BESL values
  usb: phy: phy-fsl-usb: Make structure fsl_otg_initdata constant
  usb: udc: lpc32xx: silence fall-through warning
  usb: dwc3: meson-g12a: fix suspend resume regulator unbalanced disables
  usb: udc: lpc32xx: remove set but not used 3 variables
  usb: gadget: udc: core: Fix segfault if udc_bind_to_driver() for pending driver fails
  usb: dwc3: st: Add of_dev_put() in probe function
  usb: dwc3: st: Add of_node_put() before return in probe function
  ...

1 files changed, 4 insertions, 7 deletions

diff --git a/drivers/usb/gadget/udc/lpc32xx_udc.c b/drivers/usb/gadget/udc/lpc32xx_udc.c
index e9cf20979bf6..338c606b7c27 100644
--- a/drivers/usb/gadget/udc/lpc32xx_udc.c
+++ b/drivers/usb/gadget/udc/lpc32xx_udc.c
@@ -742,7 +742,6 @@ static inline void udc_protocol_cmd_data_w(struct lpc32xx_udc *udc, u32 cmd,
  * response data */
 static u32 udc_protocol_cmd_r(struct lpc32xx_udc *udc, u32 cmd)
 {
-	u32 tmp;
 	int to = 1000;
 
 	/* Write a command and read data from the protocol engine */
@@ -752,7 +751,6 @@ static u32 udc_protocol_cmd_r(struct lpc32xx_udc *udc, u32 cmd)
 	/* Write command code */
 	udc_protocol_cmd_w(udc, cmd);
 
-	tmp = readl(USBD_DEVINTST(udc->udp_baseaddr));
 	while ((!(readl(USBD_DEVINTST(udc->udp_baseaddr)) & USBD_CDFULL))
 	       && (to > 0))
 		to--;
@@ -1992,7 +1990,7 @@ void udc_handle_eps(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep)
 /* DMA end of transfer completion */
 static void udc_handle_dma_ep(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep)
 {
-	u32 status, epstatus;
+	u32 status;
 	struct lpc32xx_request *req;
 	struct lpc32xx_usbd_dd_gad *dd;
 
@@ -2086,7 +2084,7 @@ static void udc_handle_dma_ep(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep)
 		if (udc_clearep_getsts(udc, ep->hwep_num) & EP_SEL_F) {
 			udc_clearep_getsts(udc, ep->hwep_num);
 			uda_enable_hwepint(udc, ep->hwep_num);
-			epstatus = udc_clearep_getsts(udc, ep->hwep_num);
+			udc_clearep_getsts(udc, ep->hwep_num);
 
 			/* Let the EP interrupt handle the ZLP */
 			return;
@@ -2198,7 +2196,7 @@ static void udc_handle_ep0_setup(struct lpc32xx_udc *udc)
 	struct lpc32xx_ep *ep, *ep0 = &udc->ep[0];
 	struct usb_ctrlrequest ctrlpkt;
 	int i, bytes;
-	u16 wIndex, wValue, wLength, reqtype, req, tmp;
+	u16 wIndex, wValue, reqtype, req, tmp;
 
 	/* Nuke previous transfers */
 	nuke(ep0, -EPROTO);
@@ -2214,7 +2212,6 @@ static void udc_handle_ep0_setup(struct lpc32xx_udc *udc)
 	/* Native endianness */
 	wIndex = le16_to_cpu(ctrlpkt.wIndex);
 	wValue = le16_to_cpu(ctrlpkt.wValue);
-	wLength = le16_to_cpu(ctrlpkt.wLength);
 	reqtype = le16_to_cpu(ctrlpkt.bRequestType);
 
 	/* Set direction of EP0 */
@@ -2265,7 +2262,7 @@ static void udc_handle_ep0_setup(struct lpc32xx_udc *udc)
 		default:
 			break;
 		}
-
+		break;
 
 	case USB_REQ_SET_ADDRESS:
 		if (reqtype == (USB_TYPE_STANDARD | USB_RECIP_DEVICE)) {