Merge tag 'usb-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB updates from Greg KH:
 "Here is the big USB patchset for 4.6-rc1.

  The normal mess is here, gadget and xhci fixes and updates, and lots
  of other driver updates and cleanups as well.  Full details are in the
  shortlog.

  All have been in linux-next for a while with no reported issues"

* tag 'usb-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (266 commits)
  USB: core: let USB device know device node
  usb: devio: Add ioctl to disallow detaching kernel USB drivers.
  usb: gadget: f_acm: Fix configfs attr name
  usb: udc: lpc32xx: remove USB PLL and USB OTG clock management
  usb: udc: lpc32xx: remove direct access to clock controller registers
  usb: udc: lpc32xx: switch to clock prepare/unprepare model
  usb: renesas_usbhs: gadget: fix giveback status code in usbhsg_pipe_disable()
  usb: gadget: renesas_usb3: Use ARCH_RENESAS
  usb: dwc2: Fix issues in dwc2_complete_non_isoc_xfer_ddma()
  usb: dwc2: Add support for Lantiq ARX and XRX SoCs
  usb: phy: generic: Handle late registration of gadget
  usb: gadget: bdc_udc: fix race condition in bdc_udc_exit()
  usb: musb: core: added missing const qualifier to musb_hdrc_platform_data::config
  usb: dwc2: Move host-specific core functions into hcd.c
  usb: dwc2: Move register save and restore functions
  usb: dwc2: Use kmem_cache_free()
  usb: dwc2: host: If using uframe scheduler, end splits better
  usb: dwc2: host: Totally redo the microframe scheduler
  usb: dwc2: host: Properly set even/odd frame
  usb: dwc2: host: Add dwc2_hcd_get_future_frame_number() call
  ...

6 files changed, 440 insertions, 246 deletions

diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig
index 753c29bd11ad..7c289416f87d 100644
--- a/drivers/usb/gadget/udc/Kconfig
+++ b/drivers/usb/gadget/udc/Kconfig
@@ -74,7 +74,6 @@ config USB_BCM63XX_UDC
 config USB_FSL_USB2
 	tristate "Freescale Highspeed USB DR Peripheral Controller"
 	depends on FSL_SOC || ARCH_MXC
-	select USB_FSL_MPH_DR_OF if OF
 	help
 	   Some of Freescale PowerPC and i.MX processors have a High Speed
 	   Dual-Role(DR) USB controller, which supports device mode.
@@ -128,6 +127,7 @@ config USB_OMAP
 config USB_PXA25X
 	tristate "PXA 25x or IXP 4xx"
 	depends on (ARCH_PXA && PXA25x) || ARCH_IXP4XX
+	depends on HAS_IOMEM
 	help
 	   Intel's PXA 25x series XScale ARM-5TE processors include
 	   an integrated full speed USB 1.1 device controller.  The
@@ -176,7 +176,7 @@ config USB_RENESAS_USBHS_UDC
 
 config USB_RENESAS_USB3
 	tristate 'Renesas USB3.0 Peripheral controller'
-	depends on ARCH_SHMOBILE || COMPILE_TEST
+	depends on ARCH_RENESAS || COMPILE_TEST
 	help
 	   Renesas USB3.0 Peripheral controller is a USB peripheral controller
 	   that supports super, high, and full speed USB 3.0 data transfers.
@@ -187,6 +187,7 @@ config USB_RENESAS_USB3
 
 config USB_PXA27X
 	tristate "PXA 27x"
+	depends on HAS_IOMEM
 	help
 	   Intel's PXA 27x series XScale ARM v5TE processors include
 	   an integrated full speed USB 1.1 device controller.
@@ -244,6 +245,7 @@ config USB_MV_U3D
 
 config USB_M66592
 	tristate "Renesas M66592 USB Peripheral Controller"
+	depends on HAS_IOMEM
 	help
 	   M66592 is a discrete USB peripheral controller chip that
 	   supports both full and high speed USB 2.0 data transfers.
@@ -287,6 +289,7 @@ config USB_FSL_QE
 	   dynamically linked module called "fsl_qe_udc".
 
 config USB_NET2272
+	depends on HAS_IOMEM
 	tristate "PLX NET2272"
 	help
 	  PLX NET2272 is a USB peripheral controller which supports
diff --git a/drivers/usb/gadget/udc/bdc/bdc_udc.c b/drivers/usb/gadget/udc/bdc/bdc_udc.c
index 7f77db5d1278..aae7458d8986 100644
--- a/drivers/usb/gadget/udc/bdc/bdc_udc.c
+++ b/drivers/usb/gadget/udc/bdc/bdc_udc.c
@@ -581,8 +581,13 @@ err0:
 
 void bdc_udc_exit(struct bdc *bdc)
 {
+	unsigned long flags;
+
 	dev_dbg(bdc->dev, "%s()\n", __func__);
+	spin_lock_irqsave(&bdc->lock, flags);
 	bdc_ep_disable(bdc->bdc_ep_array[1]);
+	spin_unlock_irqrestore(&bdc->lock, flags);
+
 	usb_del_gadget_udc(&bdc->gadget);
 	bdc_free_ep(bdc);
 }
diff --git a/drivers/usb/gadget/udc/lpc32xx_udc.c b/drivers/usb/gadget/udc/lpc32xx_udc.c
index 79fe6b77ee44..8f32b5ee7734 100644
--- a/drivers/usb/gadget/udc/lpc32xx_udc.c
+++ b/drivers/usb/gadget/udc/lpc32xx_udc.c
@@ -49,7 +49,6 @@
 #endif
 
 #include <mach/hardware.h>
-#include <mach/platform.h>
 
 /*
  * USB device configuration structure
@@ -147,9 +146,7 @@ struct lpc32xx_udc {
 	u32			io_p_size;
 	void __iomem		*udp_baseaddr;
 	int			udp_irq[4];
-	struct clk		*usb_pll_clk;
 	struct clk		*usb_slv_clk;
-	struct clk		*usb_otg_clk;
 
 	/* DMA support */
 	u32			*udca_v_base;
@@ -210,16 +207,6 @@ static inline struct lpc32xx_udc *to_udc(struct usb_gadget *g)
 
 #define UDCA_BUFF_SIZE (128)
 
-/* TODO: When the clock framework is introduced in LPC32xx, IO_ADDRESS will
- * be replaced with an inremap()ed pointer
- * */
-#define USB_CTRL		IO_ADDRESS(LPC32XX_CLK_PM_BASE + 0x64)
-
-/* USB_CTRL bit defines */
-#define USB_SLAVE_HCLK_EN	(1 << 24)
-#define USB_HOST_NEED_CLK_EN	(1 << 21)
-#define USB_DEV_NEED_CLK_EN	(1 << 22)
-
 /**********************************************************************
  * USB device controller register offsets
  **********************************************************************/
@@ -639,9 +626,6 @@ static void isp1301_udc_configure(struct lpc32xx_udc *udc)
 	i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
 		ISP1301_I2C_INTERRUPT_RISING, INT_VBUS_VLD);
 
-	/* Enable usb_need_clk clock after transceiver is initialized */
-	writel((readl(USB_CTRL) | USB_DEV_NEED_CLK_EN), USB_CTRL);
-
 	dev_info(udc->dev, "ISP1301 Vendor ID  : 0x%04x\n",
 		 i2c_smbus_read_word_data(udc->isp1301_i2c_client, 0x00));
 	dev_info(udc->dev, "ISP1301 Product ID : 0x%04x\n",
@@ -980,31 +964,13 @@ static void udc_clk_set(struct lpc32xx_udc *udc, int enable)
 			return;
 
 		udc->clocked = 1;
-
-		/* 48MHz PLL up */
-		clk_enable(udc->usb_pll_clk);
-
-		/* Enable the USB device clock */
-		writel(readl(USB_CTRL) | USB_DEV_NEED_CLK_EN,
-			     USB_CTRL);
-
-		clk_enable(udc->usb_otg_clk);
+		clk_prepare_enable(udc->usb_slv_clk);
 	} else {
 		if (!udc->clocked)
 			return;
 
 		udc->clocked = 0;
-
-		/* Never disable the USB_HCLK during normal operation */
-
-		/* 48MHz PLL dpwn */
-		clk_disable(udc->usb_pll_clk);
-
-		/* Disable the USB device clock */
-		writel(readl(USB_CTRL) & ~USB_DEV_NEED_CLK_EN,
-			     USB_CTRL);
-
-		clk_disable(udc->usb_otg_clk);
+		clk_disable_unprepare(udc->usb_slv_clk);
 	}
 }
 
@@ -3125,58 +3091,21 @@ static int lpc32xx_udc_probe(struct platform_device *pdev)
 		goto io_map_fail;
 	}
 
-	/* Enable AHB slave USB clock, needed for further USB clock control */
-	writel(USB_SLAVE_HCLK_EN | (1 << 19), USB_CTRL);
-
-	/* Get required clocks */
-	udc->usb_pll_clk = clk_get(&pdev->dev, "ck_pll5");
-	if (IS_ERR(udc->usb_pll_clk)) {
-		dev_err(udc->dev, "failed to acquire USB PLL\n");
-		retval = PTR_ERR(udc->usb_pll_clk);
-		goto pll_get_fail;
-	}
-	udc->usb_slv_clk = clk_get(&pdev->dev, "ck_usbd");
+	/* Get USB device clock */
+	udc->usb_slv_clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(udc->usb_slv_clk)) {
 		dev_err(udc->dev, "failed to acquire USB device clock\n");
 		retval = PTR_ERR(udc->usb_slv_clk);
 		goto usb_clk_get_fail;
 	}
-	udc->usb_otg_clk = clk_get(&pdev->dev, "ck_usb_otg");
-	if (IS_ERR(udc->usb_otg_clk)) {
-		dev_err(udc->dev, "failed to acquire USB otg clock\n");
-		retval = PTR_ERR(udc->usb_otg_clk);
-		goto usb_otg_clk_get_fail;
-	}
-
-	/* Setup PLL clock to 48MHz */
-	retval = clk_enable(udc->usb_pll_clk);
-	if (retval < 0) {
-		dev_err(udc->dev, "failed to start USB PLL\n");
-		goto pll_enable_fail;
-	}
-
-	retval = clk_set_rate(udc->usb_pll_clk, 48000);
-	if (retval < 0) {
-		dev_err(udc->dev, "failed to set USB clock rate\n");
-		goto pll_set_fail;
-	}
-
-	writel(readl(USB_CTRL) | USB_DEV_NEED_CLK_EN, USB_CTRL);
 
 	/* Enable USB device clock */
-	retval = clk_enable(udc->usb_slv_clk);
+	retval = clk_prepare_enable(udc->usb_slv_clk);
 	if (retval < 0) {
 		dev_err(udc->dev, "failed to start USB device clock\n");
 		goto usb_clk_enable_fail;
 	}
 
-	/* Enable USB OTG clock */
-	retval = clk_enable(udc->usb_otg_clk);
-	if (retval < 0) {
-		dev_err(udc->dev, "failed to start USB otg clock\n");
-		goto usb_otg_clk_enable_fail;
-	}
-
 	/* Setup deferred workqueue data */
 	udc->poweron = udc->pullup = 0;
 	INIT_WORK(&udc->pullup_job, pullup_work);
@@ -3287,19 +3216,10 @@ dma_alloc_fail:
 	dma_free_coherent(&pdev->dev, UDCA_BUFF_SIZE,
 			  udc->udca_v_base, udc->udca_p_base);
 i2c_fail:
-	clk_disable(udc->usb_otg_clk);
-usb_otg_clk_enable_fail:
-	clk_disable(udc->usb_slv_clk);
+	clk_disable_unprepare(udc->usb_slv_clk);
 usb_clk_enable_fail:
-pll_set_fail:
-	clk_disable(udc->usb_pll_clk);
-pll_enable_fail:
-	clk_put(udc->usb_otg_clk);
-usb_otg_clk_get_fail:
 	clk_put(udc->usb_slv_clk);
 usb_clk_get_fail:
-	clk_put(udc->usb_pll_clk);
-pll_get_fail:
 	iounmap(udc->udp_baseaddr);
 io_map_fail:
 	release_mem_region(udc->io_p_start, udc->io_p_size);
@@ -3336,12 +3256,9 @@ static int lpc32xx_udc_remove(struct platform_device *pdev)
 	free_irq(udc->udp_irq[IRQ_USB_HP], udc);
 	free_irq(udc->udp_irq[IRQ_USB_LP], udc);
 
-	clk_disable(udc->usb_otg_clk);
-	clk_put(udc->usb_otg_clk);
-	clk_disable(udc->usb_slv_clk);
+	clk_disable_unprepare(udc->usb_slv_clk);
 	clk_put(udc->usb_slv_clk);
-	clk_disable(udc->usb_pll_clk);
-	clk_put(udc->usb_pll_clk);
+
 	iounmap(udc->udp_baseaddr);
 	release_mem_region(udc->io_p_start, udc->io_p_size);
 	kfree(udc);
@@ -3367,7 +3284,7 @@ static int lpc32xx_udc_suspend(struct platform_device *pdev, pm_message_t mesg)
 		udc->clocked = 1;
 
 		/* Kill global USB clock */
-		clk_disable(udc->usb_slv_clk);
+		clk_disable_unprepare(udc->usb_slv_clk);
 	}
 
 	return 0;
@@ -3379,7 +3296,7 @@ static int lpc32xx_udc_resume(struct platform_device *pdev)
 
 	if (udc->clocked) {
 		/* Enable global USB clock */
-		clk_enable(udc->usb_slv_clk);
+		clk_prepare_enable(udc->usb_slv_clk);
 
 		/* Enable clocking */
 		udc_clk_set(udc, 1);
diff --git a/drivers/usb/gadget/udc/pxa25x_udc.c b/drivers/usb/gadget/udc/pxa25x_udc.c
index b82cb14850b6..a238da906115 100644
--- a/drivers/usb/gadget/udc/pxa25x_udc.c
+++ b/drivers/usb/gadget/udc/pxa25x_udc.c
@@ -48,18 +48,157 @@
 #include <linux/usb/gadget.h>
 #include <linux/usb/otg.h>
 
-/*
- * This driver is PXA25x only.  Grab the right register definitions.
- */
-#ifdef CONFIG_ARCH_PXA
-#include <mach/pxa25x-udc.h>
-#include <mach/hardware.h>
-#endif
-
 #ifdef CONFIG_ARCH_LUBBOCK
 #include <mach/lubbock.h>
 #endif
 
+#define UDCCR	 0x0000 /* UDC Control Register */
+#define UDC_RES1 0x0004 /* UDC Undocumented - Reserved1 */
+#define UDC_RES2 0x0008 /* UDC Undocumented - Reserved2 */
+#define UDC_RES3 0x000C /* UDC Undocumented - Reserved3 */
+#define UDCCS0	 0x0010 /* UDC Endpoint 0 Control/Status Register */
+#define UDCCS1	 0x0014 /* UDC Endpoint 1 (IN) Control/Status Register */
+#define UDCCS2	 0x0018 /* UDC Endpoint 2 (OUT) Control/Status Register */
+#define UDCCS3	 0x001C /* UDC Endpoint 3 (IN) Control/Status Register */
+#define UDCCS4	 0x0020 /* UDC Endpoint 4 (OUT) Control/Status Register */
+#define UDCCS5	 0x0024 /* UDC Endpoint 5 (Interrupt) Control/Status Register */
+#define UDCCS6	 0x0028 /* UDC Endpoint 6 (IN) Control/Status Register */
+#define UDCCS7	 0x002C /* UDC Endpoint 7 (OUT) Control/Status Register */
+#define UDCCS8	 0x0030 /* UDC Endpoint 8 (IN) Control/Status Register */
+#define UDCCS9	 0x0034 /* UDC Endpoint 9 (OUT) Control/Status Register */
+#define UDCCS10	 0x0038 /* UDC Endpoint 10 (Interrupt) Control/Status Register */
+#define UDCCS11	 0x003C /* UDC Endpoint 11 (IN) Control/Status Register */
+#define UDCCS12	 0x0040 /* UDC Endpoint 12 (OUT) Control/Status Register */
+#define UDCCS13	 0x0044 /* UDC Endpoint 13 (IN) Control/Status Register */
+#define UDCCS14	 0x0048 /* UDC Endpoint 14 (OUT) Control/Status Register */
+#define UDCCS15	 0x004C /* UDC Endpoint 15 (Interrupt) Control/Status Register */
+#define UFNRH	 0x0060 /* UDC Frame Number Register High */
+#define UFNRL	 0x0064 /* UDC Frame Number Register Low */
+#define UBCR2	 0x0068 /* UDC Byte Count Reg 2 */
+#define UBCR4	 0x006c /* UDC Byte Count Reg 4 */
+#define UBCR7	 0x0070 /* UDC Byte Count Reg 7 */
+#define UBCR9	 0x0074 /* UDC Byte Count Reg 9 */
+#define UBCR12	 0x0078 /* UDC Byte Count Reg 12 */
+#define UBCR14	 0x007c /* UDC Byte Count Reg 14 */
+#define UDDR0	 0x0080 /* UDC Endpoint 0 Data Register */
+#define UDDR1	 0x0100 /* UDC Endpoint 1 Data Register */
+#define UDDR2	 0x0180 /* UDC Endpoint 2 Data Register */
+#define UDDR3	 0x0200 /* UDC Endpoint 3 Data Register */
+#define UDDR4	 0x0400 /* UDC Endpoint 4 Data Register */
+#define UDDR5	 0x00A0 /* UDC Endpoint 5 Data Register */
+#define UDDR6	 0x0600 /* UDC Endpoint 6 Data Register */
+#define UDDR7	 0x0680 /* UDC Endpoint 7 Data Register */
+#define UDDR8	 0x0700 /* UDC Endpoint 8 Data Register */
+#define UDDR9	 0x0900 /* UDC Endpoint 9 Data Register */
+#define UDDR10	 0x00C0 /* UDC Endpoint 10 Data Register */
+#define UDDR11	 0x0B00 /* UDC Endpoint 11 Data Register */
+#define UDDR12	 0x0B80 /* UDC Endpoint 12 Data Register */
+#define UDDR13	 0x0C00 /* UDC Endpoint 13 Data Register */
+#define UDDR14	 0x0E00 /* UDC Endpoint 14 Data Register */
+#define UDDR15	 0x00E0 /* UDC Endpoint 15 Data Register */
+
+#define UICR0	 0x0050 /* UDC Interrupt Control Register 0 */
+#define UICR1	 0x0054 /* UDC Interrupt Control Register 1 */
+
+#define USIR0	 0x0058 /* UDC Status Interrupt Register 0 */
+#define USIR1	 0x005C /* UDC Status Interrupt Register 1 */
+
+#define UDCCR_UDE	(1 << 0)	/* UDC enable */
+#define UDCCR_UDA	(1 << 1)	/* UDC active */
+#define UDCCR_RSM	(1 << 2)	/* Device resume */
+#define UDCCR_RESIR	(1 << 3)	/* Resume interrupt request */
+#define UDCCR_SUSIR	(1 << 4)	/* Suspend interrupt request */
+#define UDCCR_SRM	(1 << 5)	/* Suspend/resume interrupt mask */
+#define UDCCR_RSTIR	(1 << 6)	/* Reset interrupt request */
+#define UDCCR_REM	(1 << 7)	/* Reset interrupt mask */
+
+#define UDCCS0_OPR	(1 << 0)	/* OUT packet ready */
+#define UDCCS0_IPR	(1 << 1)	/* IN packet ready */
+#define UDCCS0_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS0_DRWF	(1 << 3)	/* Device remote wakeup feature */
+#define UDCCS0_SST	(1 << 4)	/* Sent stall */
+#define UDCCS0_FST	(1 << 5)	/* Force stall */
+#define UDCCS0_RNE	(1 << 6)	/* Receive FIFO no empty */
+#define UDCCS0_SA	(1 << 7)	/* Setup active */
+
+#define UDCCS_BI_TFS	(1 << 0)	/* Transmit FIFO service */
+#define UDCCS_BI_TPC	(1 << 1)	/* Transmit packet complete */
+#define UDCCS_BI_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS_BI_TUR	(1 << 3)	/* Transmit FIFO underrun */
+#define UDCCS_BI_SST	(1 << 4)	/* Sent stall */
+#define UDCCS_BI_FST	(1 << 5)	/* Force stall */
+#define UDCCS_BI_TSP	(1 << 7)	/* Transmit short packet */
+
+#define UDCCS_BO_RFS	(1 << 0)	/* Receive FIFO service */
+#define UDCCS_BO_RPC	(1 << 1)	/* Receive packet complete */
+#define UDCCS_BO_DME	(1 << 3)	/* DMA enable */
+#define UDCCS_BO_SST	(1 << 4)	/* Sent stall */
+#define UDCCS_BO_FST	(1 << 5)	/* Force stall */
+#define UDCCS_BO_RNE	(1 << 6)	/* Receive FIFO not empty */
+#define UDCCS_BO_RSP	(1 << 7)	/* Receive short packet */
+
+#define UDCCS_II_TFS	(1 << 0)	/* Transmit FIFO service */
+#define UDCCS_II_TPC	(1 << 1)	/* Transmit packet complete */
+#define UDCCS_II_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS_II_TUR	(1 << 3)	/* Transmit FIFO underrun */
+#define UDCCS_II_TSP	(1 << 7)	/* Transmit short packet */
+
+#define UDCCS_IO_RFS	(1 << 0)	/* Receive FIFO service */
+#define UDCCS_IO_RPC	(1 << 1)	/* Receive packet complete */
+#ifdef CONFIG_ARCH_IXP4XX /* FIXME: is this right?, datasheed says '2' */
+#define UDCCS_IO_ROF	(1 << 3)	/* Receive overflow */
+#endif
+#ifdef CONFIG_ARCH_PXA
+#define UDCCS_IO_ROF	(1 << 2)	/* Receive overflow */
+#endif
+#define UDCCS_IO_DME	(1 << 3)	/* DMA enable */
+#define UDCCS_IO_RNE	(1 << 6)	/* Receive FIFO not empty */
+#define UDCCS_IO_RSP	(1 << 7)	/* Receive short packet */
+
+#define UDCCS_INT_TFS	(1 << 0)	/* Transmit FIFO service */
+#define UDCCS_INT_TPC	(1 << 1)	/* Transmit packet complete */
+#define UDCCS_INT_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS_INT_TUR	(1 << 3)	/* Transmit FIFO underrun */
+#define UDCCS_INT_SST	(1 << 4)	/* Sent stall */
+#define UDCCS_INT_FST	(1 << 5)	/* Force stall */
+#define UDCCS_INT_TSP	(1 << 7)	/* Transmit short packet */
+
+#define UICR0_IM0	(1 << 0)	/* Interrupt mask ep 0 */
+#define UICR0_IM1	(1 << 1)	/* Interrupt mask ep 1 */
+#define UICR0_IM2	(1 << 2)	/* Interrupt mask ep 2 */
+#define UICR0_IM3	(1 << 3)	/* Interrupt mask ep 3 */
+#define UICR0_IM4	(1 << 4)	/* Interrupt mask ep 4 */
+#define UICR0_IM5	(1 << 5)	/* Interrupt mask ep 5 */
+#define UICR0_IM6	(1 << 6)	/* Interrupt mask ep 6 */
+#define UICR0_IM7	(1 << 7)	/* Interrupt mask ep 7 */
+
+#define UICR1_IM8	(1 << 0)	/* Interrupt mask ep 8 */
+#define UICR1_IM9	(1 << 1)	/* Interrupt mask ep 9 */
+#define UICR1_IM10	(1 << 2)	/* Interrupt mask ep 10 */
+#define UICR1_IM11	(1 << 3)	/* Interrupt mask ep 11 */
+#define UICR1_IM12	(1 << 4)	/* Interrupt mask ep 12 */
+#define UICR1_IM13	(1 << 5)	/* Interrupt mask ep 13 */
+#define UICR1_IM14	(1 << 6)	/* Interrupt mask ep 14 */
+#define UICR1_IM15	(1 << 7)	/* Interrupt mask ep 15 */
+
+#define USIR0_IR0	(1 << 0)	/* Interrupt request ep 0 */
+#define USIR0_IR1	(1 << 1)	/* Interrupt request ep 1 */
+#define USIR0_IR2	(1 << 2)	/* Interrupt request ep 2 */
+#define USIR0_IR3	(1 << 3)	/* Interrupt request ep 3 */
+#define USIR0_IR4	(1 << 4)	/* Interrupt request ep 4 */
+#define USIR0_IR5	(1 << 5)	/* Interrupt request ep 5 */
+#define USIR0_IR6	(1 << 6)	/* Interrupt request ep 6 */
+#define USIR0_IR7	(1 << 7)	/* Interrupt request ep 7 */
+
+#define USIR1_IR8	(1 << 0)	/* Interrupt request ep 8 */
+#define USIR1_IR9	(1 << 1)	/* Interrupt request ep 9 */
+#define USIR1_IR10	(1 << 2)	/* Interrupt request ep 10 */
+#define USIR1_IR11	(1 << 3)	/* Interrupt request ep 11 */
+#define USIR1_IR12	(1 << 4)	/* Interrupt request ep 12 */
+#define USIR1_IR13	(1 << 5)	/* Interrupt request ep 13 */
+#define USIR1_IR14	(1 << 6)	/* Interrupt request ep 14 */
+#define USIR1_IR15	(1 << 7)	/* Interrupt request ep 15 */
+
 /*
  * This driver handles the USB Device Controller (UDC) in Intel's PXA 25x
  * series processors.  The UDC for the IXP 4xx series is very similar.
@@ -150,25 +289,61 @@ static void pullup_on(void)
 		mach->udc_command(PXA2XX_UDC_CMD_CONNECT);
 }
 
-static void pio_irq_enable(int bEndpointAddress)
+#if defined(CONFIG_CPU_BIG_ENDIAN)
+/*
+ * IXP4xx has its buses wired up in a way that relies on never doing any
+ * byte swaps, independent of whether it runs in big-endian or little-endian
+ * mode, as explained by Krzysztof Hałasa.
+ *
+ * We only support pxa25x in little-endian mode, but it is very likely
+ * that it works the same way.
+ */
+static inline void udc_set_reg(struct pxa25x_udc *dev, u32 reg, u32 val)
+{
+	iowrite32be(val, dev->regs + reg);
+}
+
+static inline u32 udc_get_reg(struct pxa25x_udc *dev, u32 reg)
 {
-        bEndpointAddress &= 0xf;
+	return ioread32be(dev->regs + reg);
+}
+#else
+static inline void udc_set_reg(struct pxa25x_udc *dev, u32 reg, u32 val)
+{
+	writel(val, dev->regs + reg);
+}
+
+static inline u32 udc_get_reg(struct pxa25x_udc *dev, u32 reg)
+{
+	return readl(dev->regs + reg);
+}
+#endif
+
+static void pio_irq_enable(struct pxa25x_ep *ep)
+{
+	u32 bEndpointAddress = ep->bEndpointAddress & 0xf;
+
         if (bEndpointAddress < 8)
-                UICR0 &= ~(1 << bEndpointAddress);
+		udc_set_reg(ep->dev, UICR0, udc_get_reg(ep->dev, UICR0) &
+						~(1 << bEndpointAddress));
         else {
                 bEndpointAddress -= 8;
-                UICR1 &= ~(1 << bEndpointAddress);
+		udc_set_reg(ep->dev, UICR1, udc_get_reg(ep->dev, UICR1) &
+						~(1 << bEndpointAddress));
 	}
 }
 
-static void pio_irq_disable(int bEndpointAddress)
+static void pio_irq_disable(struct pxa25x_ep *ep)
 {
-        bEndpointAddress &= 0xf;
+	u32 bEndpointAddress = ep->bEndpointAddress & 0xf;
+
         if (bEndpointAddress < 8)
-                UICR0 |= 1 << bEndpointAddress;
+                udc_set_reg(ep->dev, UICR0, udc_get_reg(ep->dev, UICR0) |
+						(1 << bEndpointAddress));
         else {
                 bEndpointAddress -= 8;
-                UICR1 |= 1 << bEndpointAddress;
+                udc_set_reg(ep->dev, UICR1, udc_get_reg(ep->dev, UICR1) |
+						(1 << bEndpointAddress));
         }
 }
 
@@ -177,22 +352,61 @@ static void pio_irq_disable(int bEndpointAddress)
  */
 #define UDCCR_MASK_BITS         (UDCCR_REM | UDCCR_SRM | UDCCR_UDE)
 
-static inline void udc_set_mask_UDCCR(int mask)
+static inline void udc_set_mask_UDCCR(struct pxa25x_udc *dev, int mask)
 {
-	UDCCR = (UDCCR & UDCCR_MASK_BITS) | (mask & UDCCR_MASK_BITS);
+	u32 udccr = udc_get_reg(dev, UDCCR);
+
+	udc_set_reg(dev, (udccr & UDCCR_MASK_BITS) | (mask & UDCCR_MASK_BITS), UDCCR);
 }
 
-static inline void udc_clear_mask_UDCCR(int mask)
+static inline void udc_clear_mask_UDCCR(struct pxa25x_udc *dev, int mask)
 {
-	UDCCR = (UDCCR & UDCCR_MASK_BITS) & ~(mask & UDCCR_MASK_BITS);
+	u32 udccr = udc_get_reg(dev, UDCCR);
+
+	udc_set_reg(dev, (udccr & UDCCR_MASK_BITS) & ~(mask & UDCCR_MASK_BITS), UDCCR);
 }
 
-static inline void udc_ack_int_UDCCR(int mask)
+static inline void udc_ack_int_UDCCR(struct pxa25x_udc *dev, int mask)
 {
 	/* udccr contains the bits we dont want to change */
-	__u32 udccr = UDCCR & UDCCR_MASK_BITS;
+	u32 udccr = udc_get_reg(dev, UDCCR) & UDCCR_MASK_BITS;
 
-	UDCCR = udccr | (mask & ~UDCCR_MASK_BITS);
+	udc_set_reg(dev, udccr | (mask & ~UDCCR_MASK_BITS), UDCCR);
+}
+
+static inline u32 udc_ep_get_UDCCS(struct pxa25x_ep *ep)
+{
+	return udc_get_reg(ep->dev, ep->regoff_udccs);
+}
+
+static inline void udc_ep_set_UDCCS(struct pxa25x_ep *ep, u32 data)
+{
+	udc_set_reg(ep->dev, data, ep->regoff_udccs);
+}
+
+static inline u32 udc_ep0_get_UDCCS(struct pxa25x_udc *dev)
+{
+	return udc_get_reg(dev, UDCCS0);
+}
+
+static inline void udc_ep0_set_UDCCS(struct pxa25x_udc *dev, u32 data)
+{
+	udc_set_reg(dev, data, UDCCS0);
+}
+
+static inline u32 udc_ep_get_UDDR(struct pxa25x_ep *ep)
+{
+	return udc_get_reg(ep->dev, ep->regoff_uddr);
+}
+
+static inline void udc_ep_set_UDDR(struct pxa25x_ep *ep, u32 data)
+{
+	udc_set_reg(ep->dev, data, ep->regoff_uddr);
+}
+
+static inline u32 udc_ep_get_UBCR(struct pxa25x_ep *ep)
+{
+	return udc_get_reg(ep->dev, ep->regoff_ubcr);
 }
 
 /*
@@ -358,7 +572,7 @@ static inline void ep0_idle (struct pxa25x_udc *dev)
 }
 
 static int
-write_packet(volatile u32 *uddr, struct pxa25x_request *req, unsigned max)
+write_packet(struct pxa25x_ep *ep, struct pxa25x_request *req, unsigned max)
 {
 	u8		*buf;
 	unsigned	length, count;
@@ -372,7 +586,7 @@ write_packet(volatile u32 *uddr, struct pxa25x_request *req, unsigned max)
 
 	count = length;
 	while (likely(count--))
-		*uddr = *buf++;
+		udc_ep_set_UDDR(ep, *buf++);
 
 	return length;
 }
@@ -392,7 +606,7 @@ write_fifo (struct pxa25x_ep *ep, struct pxa25x_request *req)
 		unsigned	count;
 		int		is_last, is_short;
 
-		count = write_packet(ep->reg_uddr, req, max);
+		count = write_packet(ep, req, max);
 
 		/* last packet is usually short (or a zlp) */
 		if (unlikely (count != max))
@@ -416,15 +630,15 @@ write_fifo (struct pxa25x_ep *ep, struct pxa25x_request *req)
 		 * double buffering might work.  TSP, TPC, and TFS
 		 * bit values are the same for all normal IN endpoints.
 		 */
-		*ep->reg_udccs = UDCCS_BI_TPC;
+		udc_ep_set_UDCCS(ep, UDCCS_BI_TPC);
 		if (is_short)
-			*ep->reg_udccs = UDCCS_BI_TSP;
+			udc_ep_set_UDCCS(ep, UDCCS_BI_TSP);
 
 		/* requests complete when all IN data is in the FIFO */
 		if (is_last) {
 			done (ep, req, 0);
 			if (list_empty(&ep->queue))
-				pio_irq_disable (ep->bEndpointAddress);
+				pio_irq_disable(ep);
 			return 1;
 		}
 
@@ -432,7 +646,7 @@ write_fifo (struct pxa25x_ep *ep, struct pxa25x_request *req)
 		// double buffering is off in the default fifo mode, which
 		// prevents TFS from being set here.
 
-	} while (*ep->reg_udccs & UDCCS_BI_TFS);
+	} while (udc_ep_get_UDCCS(ep) & UDCCS_BI_TFS);
 	return 0;
 }
 
@@ -442,20 +656,21 @@ write_fifo (struct pxa25x_ep *ep, struct pxa25x_request *req)
 static inline
 void ep0start(struct pxa25x_udc *dev, u32 flags, const char *tag)
 {
-	UDCCS0 = flags|UDCCS0_SA|UDCCS0_OPR;
-	USIR0 = USIR0_IR0;
+	udc_ep0_set_UDCCS(dev, flags|UDCCS0_SA|UDCCS0_OPR);
+	udc_set_reg(dev, USIR0, USIR0_IR0);
 	dev->req_pending = 0;
 	DBG(DBG_VERY_NOISY, "%s %s, %02x/%02x\n",
-		__func__, tag, UDCCS0, flags);
+		__func__, tag, udc_ep0_get_UDCCS(dev), flags);
 }
 
 static int
 write_ep0_fifo (struct pxa25x_ep *ep, struct pxa25x_request *req)
 {
+	struct pxa25x_udc *dev = ep->dev;
 	unsigned	count;
 	int		is_short;
 
-	count = write_packet(&UDDR0, req, EP0_FIFO_SIZE);
+	count = write_packet(&dev->ep[0], req, EP0_FIFO_SIZE);
 	ep->dev->stats.write.bytes += count;
 
 	/* last packet "must be" short (or a zlp) */
@@ -468,7 +683,7 @@ write_ep0_fifo (struct pxa25x_ep *ep, struct pxa25x_request *req)
 		if (ep->dev->req_pending)
 			ep0start(ep->dev, UDCCS0_IPR, "short IN");
 		else
-			UDCCS0 = UDCCS0_IPR;
+			udc_ep0_set_UDCCS(dev, UDCCS0_IPR);
 
 		count = req->req.length;
 		done (ep, req, 0);
@@ -484,9 +699,9 @@ write_ep0_fifo (struct pxa25x_ep *ep, struct pxa25x_request *req)
 		if (count >= EP0_FIFO_SIZE) {
 			count = 100;
 			do {
-				if ((UDCCS0 & UDCCS0_OPR) != 0) {
+				if ((udc_ep0_get_UDCCS(dev) & UDCCS0_OPR) != 0) {
 					/* clear OPR, generate ack */
-					UDCCS0 = UDCCS0_OPR;
+					udc_ep0_set_UDCCS(dev, UDCCS0_OPR);
 					break;
 				}
 				count--;
@@ -521,7 +736,7 @@ read_fifo (struct pxa25x_ep *ep, struct pxa25x_request *req)
 		 * UDCCS_{BO,IO}_RPC are all the same bit value.
 		 * UDCCS_{BO,IO}_RNE are all the same bit value.
 		 */
-		udccs = *ep->reg_udccs;
+		udccs = udc_ep_get_UDCCS(ep);
 		if (unlikely ((udccs & UDCCS_BO_RPC) == 0))
 			break;
 		buf = req->req.buf + req->req.actual;
@@ -530,7 +745,7 @@ read_fifo (struct pxa25x_ep *ep, struct pxa25x_request *req)
 
 		/* read all bytes from this packet */
 		if (likely (udccs & UDCCS_BO_RNE)) {
-			count = 1 + (0x0ff & *ep->reg_ubcr);
+			count = 1 + (0x0ff & udc_ep_get_UBCR(ep));
 			req->req.actual += min (count, bufferspace);
 		} else /* zlp */
 			count = 0;
@@ -540,7 +755,7 @@ read_fifo (struct pxa25x_ep *ep, struct pxa25x_request *req)
 			is_short ? "/S" : "",
 			req, req->req.actual, req->req.length);
 		while (likely (count-- != 0)) {
-			u8	byte = (u8) *ep->reg_uddr;
+			u8	byte = (u8) udc_ep_get_UDDR(ep);
 
 			if (unlikely (bufferspace == 0)) {
 				/* this happens when the driver's buffer
@@ -556,7 +771,7 @@ read_fifo (struct pxa25x_ep *ep, struct pxa25x_request *req)
 				bufferspace--;
 			}
 		}
-		*ep->reg_udccs =  UDCCS_BO_RPC;
+		udc_ep_set_UDCCS(ep, UDCCS_BO_RPC);
 		/* RPC/RSP/RNE could now reflect the other packet buffer */
 
 		/* iso is one request per packet */
@@ -571,7 +786,7 @@ read_fifo (struct pxa25x_ep *ep, struct pxa25x_request *req)
 		if (is_short || req->req.actual == req->req.length) {
 			done (ep, req, 0);
 			if (list_empty(&ep->queue))
-				pio_irq_disable (ep->bEndpointAddress);
+				pio_irq_disable(ep);
 			return 1;
 		}
 
@@ -595,7 +810,7 @@ read_ep0_fifo (struct pxa25x_ep *ep, struct pxa25x_request *req)
 	buf = req->req.buf + req->req.actual;
 	bufferspace = req->req.length - req->req.actual;
 
-	while (UDCCS0 & UDCCS0_RNE) {
+	while (udc_ep_get_UDCCS(ep) & UDCCS0_RNE) {
 		byte = (u8) UDDR0;
 
 		if (unlikely (bufferspace == 0)) {
@@ -613,7 +828,7 @@ read_ep0_fifo (struct pxa25x_ep *ep, struct pxa25x_request *req)
 		}
 	}
 
-	UDCCS0 = UDCCS0_OPR | UDCCS0_IPR;
+	udc_ep_set_UDCCS(ep, UDCCS0_OPR | UDCCS0_IPR);
 
 	/* completion */
 	if (req->req.actual >= req->req.length)
@@ -687,8 +902,8 @@ pxa25x_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 					DBG(DBG_VERBOSE, "ep0 config ack%s\n",
 						dev->has_cfr ?  "" : " raced");
 					if (dev->has_cfr)
-						UDCCFR = UDCCFR_AREN|UDCCFR_ACM
-							|UDCCFR_MB1;
+						udc_set_reg(dev, UDCCFR, UDCCFR_AREN |
+							    UDCCFR_ACM | UDCCFR_MB1);
 					done(ep, req, 0);
 					dev->ep0state = EP0_END_XFER;
 					local_irq_restore (flags);
@@ -696,7 +911,7 @@ pxa25x_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 				}
 				if (dev->req_pending)
 					ep0start(dev, UDCCS0_IPR, "OUT");
-				if (length == 0 || ((UDCCS0 & UDCCS0_RNE) != 0
+				if (length == 0 || ((udc_ep0_get_UDCCS(dev) & UDCCS0_RNE) != 0
 						&& read_ep0_fifo(ep, req))) {
 					ep0_idle(dev);
 					done(ep, req, 0);
@@ -711,16 +926,16 @@ pxa25x_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 			}
 		/* can the FIFO can satisfy the request immediately? */
 		} else if ((ep->bEndpointAddress & USB_DIR_IN) != 0) {
-			if ((*ep->reg_udccs & UDCCS_BI_TFS) != 0
+			if ((udc_ep_get_UDCCS(ep) & UDCCS_BI_TFS) != 0
 					&& write_fifo(ep, req))
 				req = NULL;
-		} else if ((*ep->reg_udccs & UDCCS_BO_RFS) != 0
+		} else if ((udc_ep_get_UDCCS(ep) & UDCCS_BO_RFS) != 0
 				&& read_fifo(ep, req)) {
 			req = NULL;
 		}
 
 		if (likely(req && ep->ep.desc))
-			pio_irq_enable(ep->bEndpointAddress);
+			pio_irq_enable(ep);
 	}
 
 	/* pio or dma irq handler advances the queue. */
@@ -747,7 +962,7 @@ static void nuke(struct pxa25x_ep *ep, int status)
 		done(ep, req, status);
 	}
 	if (ep->ep.desc)
-		pio_irq_disable (ep->bEndpointAddress);
+		pio_irq_disable(ep);
 }
 
 
@@ -807,14 +1022,14 @@ static int pxa25x_ep_set_halt(struct usb_ep *_ep, int value)
 	local_irq_save(flags);
 
 	if ((ep->bEndpointAddress & USB_DIR_IN) != 0
-			&& ((*ep->reg_udccs & UDCCS_BI_TFS) == 0
+			&& ((udc_ep_get_UDCCS(ep) & UDCCS_BI_TFS) == 0
 			   || !list_empty(&ep->queue))) {
 		local_irq_restore(flags);
 		return -EAGAIN;
 	}
 
 	/* FST bit is the same for control, bulk in, bulk out, interrupt in */
-	*ep->reg_udccs = UDCCS_BI_FST|UDCCS_BI_FTF;
+	udc_ep_set_UDCCS(ep, UDCCS_BI_FST|UDCCS_BI_FTF);
 
 	/* ep0 needs special care */
 	if (!ep->ep.desc) {
@@ -826,7 +1041,7 @@ static int pxa25x_ep_set_halt(struct usb_ep *_ep, int value)
 	} else {
 		unsigned i;
 		for (i = 0; i < 1000; i += 20) {
-			if (*ep->reg_udccs & UDCCS_BI_SST)
+			if (udc_ep_get_UDCCS(ep) & UDCCS_BI_SST)
 				break;
 			udelay(20);
 		}
@@ -850,10 +1065,10 @@ static int pxa25x_ep_fifo_status(struct usb_ep *_ep)
 	if ((ep->bEndpointAddress & USB_DIR_IN) != 0)
 		return -EOPNOTSUPP;
 	if (ep->dev->gadget.speed == USB_SPEED_UNKNOWN
-			|| (*ep->reg_udccs & UDCCS_BO_RFS) == 0)
+			|| (udc_ep_get_UDCCS(ep) & UDCCS_BO_RFS) == 0)
 		return 0;
 	else
-		return (*ep->reg_ubcr & 0xfff) + 1;
+		return (udc_ep_get_UBCR(ep) & 0xfff) + 1;
 }
 
 static void pxa25x_ep_fifo_flush(struct usb_ep *_ep)
@@ -870,15 +1085,15 @@ static void pxa25x_ep_fifo_flush(struct usb_ep *_ep)
 
 	/* for OUT, just read and discard the FIFO contents. */
 	if ((ep->bEndpointAddress & USB_DIR_IN) == 0) {
-		while (((*ep->reg_udccs) & UDCCS_BO_RNE) != 0)
-			(void) *ep->reg_uddr;
+		while (((udc_ep_get_UDCCS(ep)) & UDCCS_BO_RNE) != 0)
+			(void)udc_ep_get_UDDR(ep);
 		return;
 	}
 
 	/* most IN status is the same, but ISO can't stall */
-	*ep->reg_udccs = UDCCS_BI_TPC|UDCCS_BI_FTF|UDCCS_BI_TUR
+	udc_ep_set_UDCCS(ep, UDCCS_BI_TPC|UDCCS_BI_FTF|UDCCS_BI_TUR
 		| (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC
-			? 0 : UDCCS_BI_SST);
+			? 0 : UDCCS_BI_SST));
 }
 
 
@@ -905,15 +1120,23 @@ static struct usb_ep_ops pxa25x_ep_ops = {
 
 static int pxa25x_udc_get_frame(struct usb_gadget *_gadget)
 {
-	return ((UFNRH & 0x07) << 8) | (UFNRL & 0xff);
+	struct pxa25x_udc	*dev;
+
+	dev = container_of(_gadget, struct pxa25x_udc, gadget);
+	return ((udc_get_reg(dev, UFNRH) & 0x07) << 8) |
+		(udc_get_reg(dev, UFNRL) & 0xff);
 }
 
 static int pxa25x_udc_wakeup(struct usb_gadget *_gadget)
 {
+	struct pxa25x_udc	*udc;
+
+	udc = container_of(_gadget, struct pxa25x_udc, gadget);
+
 	/* host may not have enabled remote wakeup */
-	if ((UDCCS0 & UDCCS0_DRWF) == 0)
+	if ((udc_ep0_get_UDCCS(udc) & UDCCS0_DRWF) == 0)
 		return -EHOSTUNREACH;
-	udc_set_mask_UDCCR(UDCCR_RSM);
+	udc_set_mask_UDCCR(udc, UDCCR_RSM);
 	return 0;
 }
 
@@ -1034,9 +1257,11 @@ udc_seq_show(struct seq_file *m, void *_d)
 	/* registers for device and ep0 */
 	seq_printf(m,
 		"uicr %02X.%02X, usir %02X.%02x, ufnr %02X.%02X\n",
-		UICR1, UICR0, USIR1, USIR0, UFNRH, UFNRL);
+		udc_get_reg(dev, UICR1), udc_get_reg(dev, UICR0),
+		udc_get_reg(dev, USIR1), udc_get_reg(dev, USIR0),
+		udc_get_reg(dev, UFNRH), udc_get_reg(dev, UFNRL));
 
-	tmp = UDCCR;
+	tmp = udc_get_reg(dev, UDCCR);
 	seq_printf(m,
 		"udccr %02X =%s%s%s%s%s%s%s%s\n", tmp,
 		(tmp & UDCCR_REM) ? " rem" : "",
@@ -1048,7 +1273,7 @@ udc_seq_show(struct seq_file *m, void *_d)
 		(tmp & UDCCR_UDA) ? " uda" : "",
 		(tmp & UDCCR_UDE) ? " ude" : "");
 
-	tmp = UDCCS0;
+	tmp = udc_ep0_get_UDCCS(dev);
 	seq_printf(m,
 		"udccs0 %02X =%s%s%s%s%s%s%s%s\n", tmp,
 		(tmp & UDCCS0_SA) ? " sa" : "",
@@ -1061,7 +1286,7 @@ udc_seq_show(struct seq_file *m, void *_d)
 		(tmp & UDCCS0_OPR) ? " opr" : "");
 
 	if (dev->has_cfr) {
-		tmp = UDCCFR;
+		tmp = udc_get_reg(dev, UDCCFR);
 		seq_printf(m,
 			"udccfr %02X =%s%s\n", tmp,
 			(tmp & UDCCFR_AREN) ? " aren" : "",
@@ -1087,7 +1312,7 @@ udc_seq_show(struct seq_file *m, void *_d)
 			desc = ep->ep.desc;
 			if (!desc)
 				continue;
-			tmp = *dev->ep [i].reg_udccs;
+			tmp = udc_ep_get_UDCCS(&dev->ep[i]);
 			seq_printf(m,
 				"%s max %d %s udccs %02x irqs %lu\n",
 				ep->ep.name, usb_endpoint_maxp(desc),
@@ -1151,14 +1376,15 @@ static const struct file_operations debug_fops = {
 static void udc_disable(struct pxa25x_udc *dev)
 {
 	/* block all irqs */
-	udc_set_mask_UDCCR(UDCCR_SRM|UDCCR_REM);
-	UICR0 = UICR1 = 0xff;
-	UFNRH = UFNRH_SIM;
+	udc_set_mask_UDCCR(dev, UDCCR_SRM|UDCCR_REM);
+	udc_set_reg(dev, UICR0, 0xff);
+	udc_set_reg(dev, UICR1, 0xff);
+	udc_set_reg(dev, UFNRH, UFNRH_SIM);
 
 	/* if hardware supports it, disconnect from usb */
 	pullup_off();
 
-	udc_clear_mask_UDCCR(UDCCR_UDE);
+	udc_clear_mask_UDCCR(dev, UDCCR_UDE);
 
 	ep0_idle (dev);
 	dev->gadget.speed = USB_SPEED_UNKNOWN;
@@ -1200,10 +1426,10 @@ static void udc_reinit(struct pxa25x_udc *dev)
  */
 static void udc_enable (struct pxa25x_udc *dev)
 {
-	udc_clear_mask_UDCCR(UDCCR_UDE);
+	udc_clear_mask_UDCCR(dev, UDCCR_UDE);
 
 	/* try to clear these bits before we enable the udc */
-	udc_ack_int_UDCCR(UDCCR_SUSIR|/*UDCCR_RSTIR|*/UDCCR_RESIR);
+	udc_ack_int_UDCCR(dev, UDCCR_SUSIR|/*UDCCR_RSTIR|*/UDCCR_RESIR);
 
 	ep0_idle(dev);
 	dev->gadget.speed = USB_SPEED_UNKNOWN;
@@ -1215,15 +1441,15 @@ static void udc_enable (struct pxa25x_udc *dev)
 	 * - if RESET is already in progress, ack interrupt
 	 * - unmask reset interrupt
 	 */
-	udc_set_mask_UDCCR(UDCCR_UDE);
-	if (!(UDCCR & UDCCR_UDA))
-		udc_ack_int_UDCCR(UDCCR_RSTIR);
+	udc_set_mask_UDCCR(dev, UDCCR_UDE);
+	if (!(udc_get_reg(dev, UDCCR) & UDCCR_UDA))
+		udc_ack_int_UDCCR(dev, UDCCR_RSTIR);
 
 	if (dev->has_cfr /* UDC_RES2 is defined */) {
 		/* pxa255 (a0+) can avoid a set_config race that could
 		 * prevent gadget drivers from configuring correctly
 		 */
-		UDCCFR = UDCCFR_ACM | UDCCFR_MB1;
+		udc_set_reg(dev, UDCCFR, UDCCFR_ACM | UDCCFR_MB1);
 	} else {
 		/* "USB test mode" for pxa250 errata 40-42 (stepping a0, a1)
 		 * which could result in missing packets and interrupts.
@@ -1231,15 +1457,15 @@ static void udc_enable (struct pxa25x_udc *dev)
 		 * double buffers or not; ACM/AREN bits fit into the holes.
 		 * zero bits (like USIR0_IRx) disable double buffering.
 		 */
-		UDC_RES1 = 0x00;
-		UDC_RES2 = 0x00;
+		udc_set_reg(dev, UDC_RES1, 0x00);
+		udc_set_reg(dev, UDC_RES2, 0x00);
 	}
 
 	/* enable suspend/resume and reset irqs */
-	udc_clear_mask_UDCCR(UDCCR_SRM | UDCCR_REM);
+	udc_clear_mask_UDCCR(dev, UDCCR_SRM | UDCCR_REM);
 
 	/* enable ep0 irqs */
-	UICR0 &= ~UICR0_IM0;
+	udc_set_reg(dev, UICR0, udc_get_reg(dev, UICR0) & ~UICR0_IM0);
 
 	/* if hardware supports it, pullup D+ and wait for reset */
 	pullup_on();
@@ -1408,9 +1634,9 @@ static void udc_watchdog(unsigned long _dev)
 
 	local_irq_disable();
 	if (dev->ep0state == EP0_STALL
-			&& (UDCCS0 & UDCCS0_FST) == 0
-			&& (UDCCS0 & UDCCS0_SST) == 0) {
-		UDCCS0 = UDCCS0_FST|UDCCS0_FTF;
+			&& (udc_ep0_get_UDCCS(dev) & UDCCS0_FST) == 0
+			&& (udc_ep0_get_UDCCS(dev) & UDCCS0_SST) == 0) {
+		udc_ep0_set_UDCCS(dev, UDCCS0_FST|UDCCS0_FTF);
 		DBG(DBG_VERBOSE, "ep0 re-stall\n");
 		start_watchdog(dev);
 	}
@@ -1419,7 +1645,7 @@ static void udc_watchdog(unsigned long _dev)
 
 static void handle_ep0 (struct pxa25x_udc *dev)
 {
-	u32			udccs0 = UDCCS0;
+	u32			udccs0 = udc_ep0_get_UDCCS(dev);
 	struct pxa25x_ep	*ep = &dev->ep [0];
 	struct pxa25x_request	*req;
 	union {
@@ -1436,7 +1662,7 @@ static void handle_ep0 (struct pxa25x_udc *dev)
 	/* clear stall status */
 	if (udccs0 & UDCCS0_SST) {
 		nuke(ep, -EPIPE);
-		UDCCS0 = UDCCS0_SST;
+		udc_ep0_set_UDCCS(dev, UDCCS0_SST);
 		del_timer(&dev->timer);
 		ep0_idle(dev);
 	}
@@ -1451,7 +1677,7 @@ static void handle_ep0 (struct pxa25x_udc *dev)
 	switch (dev->ep0state) {
 	case EP0_IDLE:
 		/* late-breaking status? */
-		udccs0 = UDCCS0;
+		udccs0 = udc_ep0_get_UDCCS(dev);
 
 		/* start control request? */
 		if (likely((udccs0 & (UDCCS0_OPR|UDCCS0_SA|UDCCS0_RNE))
@@ -1462,14 +1688,14 @@ static void handle_ep0 (struct pxa25x_udc *dev)
 
 			/* read SETUP packet */
 			for (i = 0; i < 8; i++) {
-				if (unlikely(!(UDCCS0 & UDCCS0_RNE))) {
+				if (unlikely(!(udc_ep0_get_UDCCS(dev) & UDCCS0_RNE))) {
 bad_setup:
 					DMSG("SETUP %d!\n", i);
 					goto stall;
 				}
 				u.raw [i] = (u8) UDDR0;
 			}
-			if (unlikely((UDCCS0 & UDCCS0_RNE) != 0))
+			if (unlikely((udc_ep0_get_UDCCS(dev) & UDCCS0_RNE) != 0))
 				goto bad_setup;
 
 got_setup:
@@ -1545,7 +1771,7 @@ config_change:
 					 */
 				}
 				DBG(DBG_VERBOSE, "protocol STALL, "
-					"%02x err %d\n", UDCCS0, i);
+					"%02x err %d\n", udc_ep0_get_UDCCS(dev), i);
 stall:
 				/* the watchdog timer helps deal with cases
 				 * where udc seems to clear FST wrongly, and
@@ -1592,12 +1818,12 @@ stall:
 			 * - IPR cleared
 			 * - OPR got set, without SA (likely status stage)
 			 */
-			UDCCS0 = udccs0 & (UDCCS0_SA|UDCCS0_OPR);
+			udc_ep0_set_UDCCS(dev, udccs0 & (UDCCS0_SA|UDCCS0_OPR));
 		}
 		break;
 	case EP0_IN_DATA_PHASE:			/* GET_DESCRIPTOR etc */
 		if (udccs0 & UDCCS0_OPR) {
-			UDCCS0 = UDCCS0_OPR|UDCCS0_FTF;
+			udc_ep0_set_UDCCS(dev, UDCCS0_OPR|UDCCS0_FTF);
 			DBG(DBG_VERBOSE, "ep0in premature status\n");
 			if (req)
 				done(ep, req, 0);
@@ -1631,14 +1857,14 @@ stall:
 		 * also appears after some config change events.
 		 */
 		if (udccs0 & UDCCS0_OPR)
-			UDCCS0 = UDCCS0_OPR;
+			udc_ep0_set_UDCCS(dev, UDCCS0_OPR);
 		ep0_idle(dev);
 		break;
 	case EP0_STALL:
-		UDCCS0 = UDCCS0_FST;
+		udc_ep0_set_UDCCS(dev, UDCCS0_FST);
 		break;
 	}
-	USIR0 = USIR0_IR0;
+	udc_set_reg(dev, USIR0, USIR0_IR0);
 }
 
 static void handle_ep(struct pxa25x_ep *ep)
@@ -1658,14 +1884,14 @@ static void handle_ep(struct pxa25x_ep *ep)
 
 		// TODO check FST handling
 
-		udccs = *ep->reg_udccs;
+		udccs = udc_ep_get_UDCCS(ep);
 		if (unlikely(is_in)) {	/* irq from TPC, SST, or (ISO) TUR */
 			tmp = UDCCS_BI_TUR;
 			if (likely(ep->bmAttributes == USB_ENDPOINT_XFER_BULK))
 				tmp |= UDCCS_BI_SST;
 			tmp &= udccs;
 			if (likely (tmp))
-				*ep->reg_udccs = tmp;
+				udc_ep_set_UDCCS(ep, tmp);
 			if (req && likely ((udccs & UDCCS_BI_TFS) != 0))
 				completed = write_fifo(ep, req);
 
@@ -1676,13 +1902,13 @@ static void handle_ep(struct pxa25x_ep *ep)
 				tmp = UDCCS_IO_ROF | UDCCS_IO_DME;
 			tmp &= udccs;
 			if (likely(tmp))
-				*ep->reg_udccs = tmp;
+				udc_ep_set_UDCCS(ep, tmp);
 
 			/* fifos can hold packets, ready for reading... */
 			if (likely(req)) {
 				completed = read_fifo(ep, req);
 			} else
-				pio_irq_disable (ep->bEndpointAddress);
+				pio_irq_disable(ep);
 		}
 		ep->pio_irqs++;
 	} while (completed);
@@ -1703,13 +1929,13 @@ pxa25x_udc_irq(int irq, void *_dev)
 
 	dev->stats.irqs++;
 	do {
-		u32		udccr = UDCCR;
+		u32		udccr = udc_get_reg(dev, UDCCR);
 
 		handled = 0;
 
 		/* SUSpend Interrupt Request */
 		if (unlikely(udccr & UDCCR_SUSIR)) {
-			udc_ack_int_UDCCR(UDCCR_SUSIR);
+			udc_ack_int_UDCCR(dev, UDCCR_SUSIR);
 			handled = 1;
 			DBG(DBG_VERBOSE, "USB suspend\n");
 
@@ -1722,7 +1948,7 @@ pxa25x_udc_irq(int irq, void *_dev)
 
 		/* RESume Interrupt Request */
 		if (unlikely(udccr & UDCCR_RESIR)) {
-			udc_ack_int_UDCCR(UDCCR_RESIR);
+			udc_ack_int_UDCCR(dev, UDCCR_RESIR);
 			handled = 1;
 			DBG(DBG_VERBOSE, "USB resume\n");
 
@@ -1734,10 +1960,10 @@ pxa25x_udc_irq(int irq, void *_dev)
 
 		/* ReSeT Interrupt Request - USB reset */
 		if (unlikely(udccr & UDCCR_RSTIR)) {
-			udc_ack_int_UDCCR(UDCCR_RSTIR);
+			udc_ack_int_UDCCR(dev, UDCCR_RSTIR);
 			handled = 1;
 
-			if ((UDCCR & UDCCR_UDA) == 0) {
+			if ((udc_get_reg(dev, UDCCR) & UDCCR_UDA) == 0) {
 				DBG(DBG_VERBOSE, "USB reset start\n");
 
 				/* reset driver and endpoints,
@@ -1753,8 +1979,10 @@ pxa25x_udc_irq(int irq, void *_dev)
 			}
 
 		} else {
-			u32	usir0 = USIR0 & ~UICR0;
-			u32	usir1 = USIR1 & ~UICR1;
+			u32	usir0 = udc_get_reg(dev, USIR0) &
+					~udc_get_reg(dev, UICR0);
+			u32	usir1 = udc_get_reg(dev, USIR1) &
+					~udc_get_reg(dev, UICR1);
 			int	i;
 
 			if (unlikely (!usir0 && !usir1))
@@ -1775,13 +2003,15 @@ pxa25x_udc_irq(int irq, void *_dev)
 
 				if (i && (usir0 & tmp)) {
 					handle_ep(&dev->ep[i]);
-					USIR0 |= tmp;
+					udc_set_reg(dev, USIR0,
+						udc_get_reg(dev, USIR0) | tmp);
 					handled = 1;
 				}
 #ifndef	CONFIG_USB_PXA25X_SMALL
 				if (usir1 & tmp) {
 					handle_ep(&dev->ep[i+8]);
-					USIR1 |= tmp;
+					udc_set_reg(dev, USIR1,
+						udc_get_reg(dev, USIR1) | tmp);
 					handled = 1;
 				}
 #endif
@@ -1826,8 +2056,8 @@ static struct pxa25x_udc memory = {
 						USB_EP_CAPS_DIR_ALL),
 		},
 		.dev		= &memory,
-		.reg_udccs	= &UDCCS0,
-		.reg_uddr	= &UDDR0,
+		.regoff_udccs	= UDCCS0,
+		.regoff_uddr	= UDDR0,
 	},
 
 	/* first group of endpoints */
@@ -1843,8 +2073,8 @@ static struct pxa25x_udc memory = {
 		.fifo_size	= BULK_FIFO_SIZE,
 		.bEndpointAddress = USB_DIR_IN | 1,
 		.bmAttributes	= USB_ENDPOINT_XFER_BULK,
-		.reg_udccs	= &UDCCS1,
-		.reg_uddr	= &UDDR1,
+		.regoff_udccs	= UDCCS1,
+		.regoff_uddr	= UDDR1,
 	},
 	.ep[2] = {
 		.ep = {
@@ -1858,9 +2088,9 @@ static struct pxa25x_udc memory = {
 		.fifo_size	= BULK_FIFO_SIZE,
 		.bEndpointAddress = 2,
 		.bmAttributes	= USB_ENDPOINT_XFER_BULK,
-		.reg_udccs	= &UDCCS2,
-		.reg_ubcr	= &UBCR2,
-		.reg_uddr	= &UDDR2,
+		.regoff_udccs	= UDCCS2,
+		.regoff_ubcr	= UBCR2,
+		.regoff_uddr	= UDDR2,
 	},
 #ifndef CONFIG_USB_PXA25X_SMALL
 	.ep[3] = {
@@ -1875,8 +2105,8 @@ static struct pxa25x_udc memory = {
 		.fifo_size	= ISO_FIFO_SIZE,
 		.bEndpointAddress = USB_DIR_IN | 3,
 		.bmAttributes	= USB_ENDPOINT_XFER_ISOC,
-		.reg_udccs	= &UDCCS3,
-		.reg_uddr	= &UDDR3,
+		.regoff_udccs	= UDCCS3,
+		.regoff_uddr	= UDDR3,
 	},
 	.ep[4] = {
 		.ep = {
@@ -1890,9 +2120,9 @@ static struct pxa25x_udc memory = {
 		.fifo_size	= ISO_FIFO_SIZE,
 		.bEndpointAddress = 4,
 		.bmAttributes	= USB_ENDPOINT_XFER_ISOC,
-		.reg_udccs	= &UDCCS4,
-		.reg_ubcr	= &UBCR4,
-		.reg_uddr	= &UDDR4,
+		.regoff_udccs	= UDCCS4,
+		.regoff_ubcr	= UBCR4,
+		.regoff_uddr	= UDDR4,
 	},
 	.ep[5] = {
 		.ep = {
@@ -1905,8 +2135,8 @@ static struct pxa25x_udc memory = {
 		.fifo_size	= INT_FIFO_SIZE,
 		.bEndpointAddress = USB_DIR_IN | 5,
 		.bmAttributes	= USB_ENDPOINT_XFER_INT,
-		.reg_udccs	= &UDCCS5,
-		.reg_uddr	= &UDDR5,
+		.regoff_udccs	= UDCCS5,
+		.regoff_uddr	= UDDR5,
 	},
 
 	/* second group of endpoints */
@@ -1922,8 +2152,8 @@ static struct pxa25x_udc memory = {
 		.fifo_size	= BULK_FIFO_SIZE,
 		.bEndpointAddress = USB_DIR_IN | 6,
 		.bmAttributes	= USB_ENDPOINT_XFER_BULK,
-		.reg_udccs	= &UDCCS6,
-		.reg_uddr	= &UDDR6,
+		.regoff_udccs	= UDCCS6,
+		.regoff_uddr	= UDDR6,
 	},
 	.ep[7] = {
 		.ep = {
@@ -1937,9 +2167,9 @@ static struct pxa25x_udc memory = {
 		.fifo_size	= BULK_FIFO_SIZE,
 		.bEndpointAddress = 7,
 		.bmAttributes	= USB_ENDPOINT_XFER_BULK,
-		.reg_udccs	= &UDCCS7,
-		.reg_ubcr	= &UBCR7,
-		.reg_uddr	= &UDDR7,
+		.regoff_udccs	= UDCCS7,
+		.regoff_ubcr	= UBCR7,
+		.regoff_uddr	= UDDR7,
 	},
 	.ep[8] = {
 		.ep = {
@@ -1953,8 +2183,8 @@ static struct pxa25x_udc memory = {
 		.fifo_size	= ISO_FIFO_SIZE,
 		.bEndpointAddress = USB_DIR_IN | 8,
 		.bmAttributes	= USB_ENDPOINT_XFER_ISOC,
-		.reg_udccs	= &UDCCS8,
-		.reg_uddr	= &UDDR8,
+		.regoff_udccs	= UDCCS8,
+		.regoff_uddr	= UDDR8,
 	},
 	.ep[9] = {
 		.ep = {
@@ -1968,9 +2198,9 @@ static struct pxa25x_udc memory = {
 		.fifo_size	= ISO_FIFO_SIZE,
 		.bEndpointAddress = 9,
 		.bmAttributes	= USB_ENDPOINT_XFER_ISOC,
-		.reg_udccs	= &UDCCS9,
-		.reg_ubcr	= &UBCR9,
-		.reg_uddr	= &UDDR9,
+		.regoff_udccs	= UDCCS9,
+		.regoff_ubcr	= UBCR9,
+		.regoff_uddr	= UDDR9,
 	},
 	.ep[10] = {
 		.ep = {
@@ -1983,8 +2213,8 @@ static struct pxa25x_udc memory = {
 		.fifo_size	= INT_FIFO_SIZE,
 		.bEndpointAddress = USB_DIR_IN | 10,
 		.bmAttributes	= USB_ENDPOINT_XFER_INT,
-		.reg_udccs	= &UDCCS10,
-		.reg_uddr	= &UDDR10,
+		.regoff_udccs	= UDCCS10,
+		.regoff_uddr	= UDDR10,
 	},
 
 	/* third group of endpoints */
@@ -2000,8 +2230,8 @@ static struct pxa25x_udc memory = {
 		.fifo_size	= BULK_FIFO_SIZE,
 		.bEndpointAddress = USB_DIR_IN | 11,
 		.bmAttributes	= USB_ENDPOINT_XFER_BULK,
-		.reg_udccs	= &UDCCS11,
-		.reg_uddr	= &UDDR11,
+		.regoff_udccs	= UDCCS11,
+		.regoff_uddr	= UDDR11,
 	},
 	.ep[12] = {
 		.ep = {
@@ -2015,9 +2245,9 @@ static struct pxa25x_udc memory = {
 		.fifo_size	= BULK_FIFO_SIZE,
 		.bEndpointAddress = 12,
 		.bmAttributes	= USB_ENDPOINT_XFER_BULK,
-		.reg_udccs	= &UDCCS12,
-		.reg_ubcr	= &UBCR12,
-		.reg_uddr	= &UDDR12,
+		.regoff_udccs	= UDCCS12,
+		.regoff_ubcr	= UBCR12,
+		.regoff_uddr	= UDDR12,
 	},
 	.ep[13] = {
 		.ep = {
@@ -2031,8 +2261,8 @@ static struct pxa25x_udc memory = {
 		.fifo_size	= ISO_FIFO_SIZE,
 		.bEndpointAddress = USB_DIR_IN | 13,
 		.bmAttributes	= USB_ENDPOINT_XFER_ISOC,
-		.reg_udccs	= &UDCCS13,
-		.reg_uddr	= &UDDR13,
+		.regoff_udccs	= UDCCS13,
+		.regoff_uddr	= UDDR13,
 	},
 	.ep[14] = {
 		.ep = {
@@ -2046,9 +2276,9 @@ static struct pxa25x_udc memory = {
 		.fifo_size	= ISO_FIFO_SIZE,
 		.bEndpointAddress = 14,
 		.bmAttributes	= USB_ENDPOINT_XFER_ISOC,
-		.reg_udccs	= &UDCCS14,
-		.reg_ubcr	= &UBCR14,
-		.reg_uddr	= &UDDR14,
+		.regoff_udccs	= UDCCS14,
+		.regoff_ubcr	= UBCR14,
+		.regoff_uddr	= UDDR14,
 	},
 	.ep[15] = {
 		.ep = {
@@ -2061,8 +2291,8 @@ static struct pxa25x_udc memory = {
 		.fifo_size	= INT_FIFO_SIZE,
 		.bEndpointAddress = USB_DIR_IN | 15,
 		.bmAttributes	= USB_ENDPOINT_XFER_INT,
-		.reg_udccs	= &UDCCS15,
-		.reg_uddr	= &UDDR15,
+		.regoff_udccs	= UDCCS15,
+		.regoff_uddr	= UDDR15,
 	},
 #endif /* !CONFIG_USB_PXA25X_SMALL */
 };
@@ -2109,6 +2339,7 @@ static int pxa25x_udc_probe(struct platform_device *pdev)
 	struct pxa25x_udc *dev = &memory;
 	int retval, irq;
 	u32 chiprev;
+	struct resource *res;
 
 	pr_info("%s: version %s\n", driver_name, DRIVER_VERSION);
 
@@ -2154,6 +2385,11 @@ static int pxa25x_udc_probe(struct platform_device *pdev)
 	if (irq < 0)
 		return -ENODEV;
 
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	dev->regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(dev->regs))
+		return PTR_ERR(dev->regs);
+
 	dev->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(dev->clk))
 		return PTR_ERR(dev->clk);
diff --git a/drivers/usb/gadget/udc/pxa25x_udc.h b/drivers/usb/gadget/udc/pxa25x_udc.h
index 3fe5931dc21a..4b8b72d7ab37 100644
--- a/drivers/usb/gadget/udc/pxa25x_udc.h
+++ b/drivers/usb/gadget/udc/pxa25x_udc.h
@@ -56,9 +56,9 @@ struct pxa25x_ep {
 	 * UDDR = UDC Endpoint Data Register (the fifo)
 	 * DRCM = DMA Request Channel Map
 	 */
-	volatile u32				*reg_udccs;
-	volatile u32				*reg_ubcr;
-	volatile u32				*reg_uddr;
+	u32					regoff_udccs;
+	u32					regoff_ubcr;
+	u32					regoff_uddr;
 };
 
 struct pxa25x_request {
@@ -125,6 +125,7 @@ struct pxa25x_udc {
 #ifdef CONFIG_USB_GADGET_DEBUG_FS
 	struct dentry				*debugfs_udc;
 #endif
+	void __iomem				*regs;
 };
 #define to_pxa25x(g)	(container_of((g), struct pxa25x_udc, gadget))
 
@@ -197,6 +198,8 @@ dump_udccs0(const char *label)
 		(udccs0 & UDCCS0_OPR) ? " opr" : "");
 }
 
+static inline u32 udc_ep_get_UDCCS(struct pxa25x_ep *);
+
 static void __maybe_unused
 dump_state(struct pxa25x_udc *dev)
 {
@@ -228,7 +231,7 @@ dump_state(struct pxa25x_udc *dev)
 	for (i = 1; i < PXA_UDC_NUM_ENDPOINTS; i++) {
 		if (dev->ep[i].ep.desc == NULL)
 			continue;
-		DMSG ("udccs%d = %02x\n", i, *dev->ep->reg_udccs);
+		DMSG ("udccs%d = %02x\n", i, udc_ep_get_UDCCS(&dev->ep[i]));
 	}
 }
 
diff --git a/drivers/usb/gadget/udc/udc-core.c b/drivers/usb/gadget/udc/udc-core.c
index b86a6f03592e..4151597e9d28 100644
--- a/drivers/usb/gadget/udc/udc-core.c
+++ b/drivers/usb/gadget/udc/udc-core.c
@@ -443,6 +443,36 @@ err1:
 EXPORT_SYMBOL_GPL(usb_add_gadget_udc_release);
 
 /**
+ * usb_get_gadget_udc_name - get the name of the first UDC controller
+ * This functions returns the name of the first UDC controller in the system.
+ * Please note that this interface is usefull only for legacy drivers which
+ * assume that there is only one UDC controller in the system and they need to
+ * get its name before initialization. There is no guarantee that the UDC
+ * of the returned name will be still available, when gadget driver registers
+ * itself.
+ *
+ * Returns pointer to string with UDC controller name on success, NULL
+ * otherwise. Caller should kfree() returned string.
+ */
+char *usb_get_gadget_udc_name(void)
+{
+	struct usb_udc *udc;
+	char *name = NULL;
+
+	/* For now we take the first available UDC */
+	mutex_lock(&udc_lock);
+	list_for_each_entry(udc, &udc_list, list) {
+		if (!udc->driver) {
+			name = kstrdup(udc->gadget->name, GFP_KERNEL);
+			break;
+		}
+	}
+	mutex_unlock(&udc_lock);
+	return name;
+}
+EXPORT_SYMBOL_GPL(usb_get_gadget_udc_name);
+
+/**
  * usb_add_gadget_udc - adds a new gadget to the udc class driver list
  * @parent: the parent device to this udc. Usually the controller
  * driver's device.