Merge tag 'i2c-for-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:

 - new drivers for HPE GXP and Loongson 2K/LS7A

 - bigger refactorings for i801 and xiic

 - gpio driver gained ACPI and SDA-write only support

 - the core converted some OF helpers to fwnode helpers

 - usual bunch of driver updates

* tag 'i2c-for-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (52 commits)
  MAINTAINERS: Add HPE GXP I2C Support
  i2c: Add GXP SoC I2C Controller
  dt-bindings: i2c: Add hpe,gxp-i2c
  i2c: xiic: Remove some dead code
  i2c: xiic: Add SCL frequency configuration support
  i2c: xiic: Update compatible with new IP version
  dt-bindings: i2c: xiic: Add 'xlnx,axi-iic-2.1' to compatible
  i2c: i801: Call i801_check_post() from i801_access()
  i2c: i801: Call i801_check_pre() from i801_access()
  i2c: i801: Centralize configuring block commands in i801_block_transaction
  i2c: i801: Centralize configuring non-block commands in i801_simple_transaction
  i2c: i801: Handle SMBAUXCTL_E32B in i801_block_transaction_by_block only
  i2c: i801: Add i801_simple_transaction(), complementing i801_block_transaction()
  Documentation: i2c: correct spelling
  dt-bindings: i2c: i2c-st: convert to DT schema
  i2c: i801: add helper i801_set_hstadd()
  i2c: i801: make FEATURE_BLOCK_PROC dependent on FEATURE_BLOCK_BUFFER
  i2c: i801: make FEATURE_HOST_NOTIFY dependent on FEATURE_IRQ
  i2c: i801: improve interrupt handler
  i2c: st: use pm_sleep_ptr to avoid ifdef CONFIG_PM_SLEEP
  ...

2 files changed, 24 insertions, 0 deletions

diff --git a/include/linux/pinctrl/devinfo.h b/include/linux/pinctrl/devinfo.h
index 9e8b559e1253..bb6653af4f92 100644
--- a/include/linux/pinctrl/devinfo.h
+++ b/include/linux/pinctrl/devinfo.h
@@ -18,6 +18,8 @@ struct device;
 
 #ifdef CONFIG_PINCTRL
 
+#include <linux/device.h>
+
 /* The device core acts as a consumer toward pinctrl */
 #include <linux/pinctrl/consumer.h>
 
@@ -44,6 +46,14 @@ struct dev_pin_info {
 extern int pinctrl_bind_pins(struct device *dev);
 extern int pinctrl_init_done(struct device *dev);
 
+static inline struct pinctrl *dev_pinctrl(struct device *dev)
+{
+	if (!dev->pins)
+		return NULL;
+
+	return dev->pins->p;
+}
+
 #else
 
 /* Stubs if we're not using pinctrl */
@@ -58,5 +68,10 @@ static inline int pinctrl_init_done(struct device *dev)
 	return 0;
 }
 
+static inline struct pinctrl *dev_pinctrl(struct device *dev)
+{
+	return NULL;
+}
+
 #endif /* CONFIG_PINCTRL */
 #endif /* PINCTRL_DEVINFO_H */
diff --git a/include/linux/platform_data/i2c-gpio.h b/include/linux/platform_data/i2c-gpio.h
index a907774fd177..545639bcca72 100644
--- a/include/linux/platform_data/i2c-gpio.h
+++ b/include/linux/platform_data/i2c-gpio.h
@@ -16,16 +16,25 @@
  *	isn't actively driven high when setting the output value high.
  *	gpio_get_value() must return the actual pin state even if the
  *	pin is configured as an output.
+ * @sda_is_output_only: SDA output drivers can't be turned off.
+ *	This is for clients that can only read SDA/SCL.
+ * @sda_has_no_pullup: SDA is used in a non-compliant way and has no pull-up.
+ *	Therefore disable open-drain.
  * @scl_is_open_drain: SCL is set up as open drain. Same requirements
  *	as for sda_is_open_drain apply.
  * @scl_is_output_only: SCL output drivers cannot be turned off.
+ * @scl_has_no_pullup: SCL is used in a non-compliant way and has no pull-up.
+ *	Therefore disable open-drain.
  */
 struct i2c_gpio_platform_data {
 	int		udelay;
 	int		timeout;
 	unsigned int	sda_is_open_drain:1;
+	unsigned int	sda_is_output_only:1;
+	unsigned int	sda_has_no_pullup:1;
 	unsigned int	scl_is_open_drain:1;
 	unsigned int	scl_is_output_only:1;
+	unsigned int	scl_has_no_pullup:1;
 };
 
 #endif /* _LINUX_I2C_GPIO_H */