diff options
author | Hans de Goede <hdegoede@redhat.com> | 2018-02-22 16:20:35 +0300 |
---|---|---|
committer | Takashi Iwai <tiwai@suse.de> | 2018-02-24 13:27:31 +0300 |
commit | 1ba8f9d308174e647b864c36209b4d7934d99888 (patch) | |
tree | 3993ba03a4243f9679ca618e1bfa9a7519429756 /sound/pci/hda/hda_intel.c | |
parent | 7229b12f5da33d5c376ee264f063703844b8092d (diff) | |
download | linux-1ba8f9d308174e647b864c36209b4d7934d99888.tar.xz |
ALSA: hda: Add a power_save blacklist
On some boards setting power_save to a non 0 value leads to clicking /
popping sounds when ever we enter/leave powersaving mode. Ideally we would
figure out how to avoid these sounds, but that is not always feasible.
This commit adds a blacklist for devices where powersaving is known to
cause problems and disables it on these devices.
Note I tried to put this blacklist in userspace first:
https://github.com/systemd/systemd/pull/8128
But the systemd maintainers rightfully pointed out that it would be
impossible to then later remove entries once we actually find a way to
make power-saving work on listed boards without issues. Having this list
in the kernel will allow removal of the blacklist entry in the same commit
which fixes the clicks / plops.
The blacklist only applies to the default power_save module-option value,
if a user explicitly sets the module-option then the blacklist is not
used.
[ added an ifdef CONFIG_PM for the build error -- tiwai]
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1525104
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198611
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Diffstat (limited to 'sound/pci/hda/hda_intel.c')
-rw-r--r-- | sound/pci/hda/hda_intel.c | 38 |
1 files changed, 36 insertions, 2 deletions
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index c71dcacea807..96143df19b21 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -181,7 +181,7 @@ static const struct kernel_param_ops param_ops_xint = { }; #define param_check_xint param_check_int -static int power_save = CONFIG_SND_HDA_POWER_SAVE_DEFAULT; +static int power_save = -1; module_param(power_save, xint, 0644); MODULE_PARM_DESC(power_save, "Automatic power-saving timeout " "(in second, 0 = disable)."); @@ -2186,6 +2186,24 @@ out_free: return err; } +#ifdef CONFIG_PM +/* On some boards setting power_save to a non 0 value leads to clicking / + * popping sounds when ever we enter/leave powersaving mode. Ideally we would + * figure out how to avoid these sounds, but that is not always feasible. + * So we keep a list of devices where we disable powersaving as its known + * to causes problems on these devices. + */ +static struct snd_pci_quirk power_save_blacklist[] = { + /* https://bugzilla.redhat.com/show_bug.cgi?id=1525104 */ + SND_PCI_QUIRK(0x1849, 0x0c0c, "Asrock B85M-ITX", 0), + /* https://bugzilla.redhat.com/show_bug.cgi?id=1525104 */ + SND_PCI_QUIRK(0x1043, 0x8733, "Asus Prime X370-Pro", 0), + /* https://bugzilla.kernel.org/show_bug.cgi?id=198611 */ + SND_PCI_QUIRK(0x17aa, 0x2227, "Lenovo X1 Carbon 3rd Gen", 0), + {} +}; +#endif /* CONFIG_PM */ + /* number of codec slots for each chipset: 0 = default slots (i.e. 4) */ static unsigned int azx_max_codecs[AZX_NUM_DRIVERS] = { [AZX_DRIVER_NVIDIA] = 8, @@ -2198,6 +2216,7 @@ static int azx_probe_continue(struct azx *chip) struct hdac_bus *bus = azx_bus(chip); struct pci_dev *pci = chip->pci; int dev = chip->dev_index; + int val; int err; hda->probe_continued = 1; @@ -2278,7 +2297,22 @@ static int azx_probe_continue(struct azx *chip) chip->running = 1; azx_add_card_list(chip); - snd_hda_set_power_save(&chip->bus, power_save * 1000); + + val = power_save; +#ifdef CONFIG_PM + if (val == -1) { + const struct snd_pci_quirk *q; + + val = CONFIG_SND_HDA_POWER_SAVE_DEFAULT; + q = snd_pci_quirk_lookup(chip->pci, power_save_blacklist); + if (q && val) { + dev_info(chip->card->dev, "device %04x:%04x is on the power_save blacklist, forcing power_save to 0\n", + q->subvendor, q->subdevice); + val = 0; + } + } +#endif /* CONFIG_PM */ + snd_hda_set_power_save(&chip->bus, val * 1000); if (azx_has_pm_runtime(chip) || hda->use_vga_switcheroo) pm_runtime_put_autosuspend(&pci->dev); |