Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Two minor conflicts:

1) net/ipv4/route.c, adding a new local variable while
   moving another local variable and removing it's
   initial assignment.

2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes.
   One pretty prints the port mode differently, whilst another
   changes the driver to try and obtain the port mode from
   the port node rather than the switch node.

Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 81 insertions, 104 deletions

diff --git a/sound/soc/intel/haswell/sst-haswell-dsp.c b/sound/soc/intel/haswell/sst-haswell-dsp.c
index de80e19454c1..88c3f63bded9 100644
--- a/sound/soc/intel/haswell/sst-haswell-dsp.c
+++ b/sound/soc/intel/haswell/sst-haswell-dsp.c
@@ -243,92 +243,45 @@ static irqreturn_t hsw_irq(int irq, void *context)
 	return ret;
 }
 
-#define CSR_DEFAULT_VALUE 0x8480040E
-#define ISC_DEFAULT_VALUE 0x0
-#define ISD_DEFAULT_VALUE 0x0
-#define IMC_DEFAULT_VALUE 0x7FFF0003
-#define IMD_DEFAULT_VALUE 0x7FFF0003
-#define IPCC_DEFAULT_VALUE 0x0
-#define IPCD_DEFAULT_VALUE 0x0
-#define CLKCTL_DEFAULT_VALUE 0x7FF
-#define CSR2_DEFAULT_VALUE 0x0
-#define LTR_CTRL_DEFAULT_VALUE 0x0
-#define HMD_CTRL_DEFAULT_VALUE 0x0
-
-static void hsw_set_shim_defaults(struct sst_dsp *sst)
-{
-	sst_dsp_shim_write_unlocked(sst, SST_CSR, CSR_DEFAULT_VALUE);
-	sst_dsp_shim_write_unlocked(sst, SST_ISRX, ISC_DEFAULT_VALUE);
-	sst_dsp_shim_write_unlocked(sst, SST_ISRD, ISD_DEFAULT_VALUE);
-	sst_dsp_shim_write_unlocked(sst, SST_IMRX, IMC_DEFAULT_VALUE);
-	sst_dsp_shim_write_unlocked(sst, SST_IMRD, IMD_DEFAULT_VALUE);
-	sst_dsp_shim_write_unlocked(sst, SST_IPCX, IPCC_DEFAULT_VALUE);
-	sst_dsp_shim_write_unlocked(sst, SST_IPCD, IPCD_DEFAULT_VALUE);
-	sst_dsp_shim_write_unlocked(sst, SST_CLKCTL, CLKCTL_DEFAULT_VALUE);
-	sst_dsp_shim_write_unlocked(sst, SST_CSR2, CSR2_DEFAULT_VALUE);
-	sst_dsp_shim_write_unlocked(sst, SST_LTRC, LTR_CTRL_DEFAULT_VALUE);
-	sst_dsp_shim_write_unlocked(sst, SST_HMDC, HMD_CTRL_DEFAULT_VALUE);
-}
-
-/* all clock-gating minus DCLCGE and DTCGE */
-#define SST_VDRTCL2_CG_OTHER	0xB7D
-
 static void hsw_set_dsp_D3(struct sst_dsp *sst)
 {
+	u32 val;
 	u32 reg;
 
-	/* disable clock core gating */
+	/* Disable core clock gating (VDRTCTL2.DCLCGE = 0) */
 	reg = readl(sst->addr.pci_cfg + SST_VDRTCTL2);
-	reg &= ~(SST_VDRTCL2_DCLCGE);
+	reg &= ~(SST_VDRTCL2_DCLCGE | SST_VDRTCL2_DTCGE);
 	writel(reg, sst->addr.pci_cfg + SST_VDRTCTL2);
 
-	/* stall, reset and set 24MHz XOSC */
-	sst_dsp_shim_update_bits_unlocked(sst, SST_CSR,
-			SST_CSR_24MHZ_LPCS | SST_CSR_STALL | SST_CSR_RST,
-			SST_CSR_24MHZ_LPCS | SST_CSR_STALL | SST_CSR_RST);
-
-	/* DRAM power gating all */
-	reg = readl(sst->addr.pci_cfg + SST_VDRTCTL0);
-	reg |= SST_VDRTCL0_ISRAMPGE_MASK |
-		SST_VDRTCL0_DSRAMPGE_MASK;
-	reg &= ~(SST_VDRTCL0_D3SRAMPGD);
-	reg |= SST_VDRTCL0_D3PGD;
-	writel(reg, sst->addr.pci_cfg + SST_VDRTCTL0);
-	udelay(50);
+	/* enable power gating and switch off DRAM & IRAM blocks */
+	val = readl(sst->addr.pci_cfg + SST_VDRTCTL0);
+	val |= SST_VDRTCL0_DSRAMPGE_MASK |
+		SST_VDRTCL0_ISRAMPGE_MASK;
+	val &= ~(SST_VDRTCL0_D3PGD | SST_VDRTCL0_D3SRAMPGD);
+	writel(val, sst->addr.pci_cfg + SST_VDRTCTL0);
 
-	/* PLL shutdown enable */
-	reg = readl(sst->addr.pci_cfg + SST_VDRTCTL2);
-	reg |= SST_VDRTCL2_APLLSE_MASK;
-	writel(reg, sst->addr.pci_cfg + SST_VDRTCTL2);
+	/* switch off audio PLL */
+	val = readl(sst->addr.pci_cfg + SST_VDRTCTL2);
+	val |= SST_VDRTCL2_APLLSE_MASK;
+	writel(val, sst->addr.pci_cfg + SST_VDRTCTL2);
 
-	/* disable MCLK */
+	/* disable MCLK(clkctl.smos = 0) */
 	sst_dsp_shim_update_bits_unlocked(sst, SST_CLKCTL,
-			SST_CLKCTL_MASK, 0);
-
-	/* switch clock gating */
-	reg = readl(sst->addr.pci_cfg + SST_VDRTCTL2);
-	reg |= SST_VDRTCL2_CG_OTHER;
-	reg &= ~(SST_VDRTCL2_DTCGE);
-	writel(reg, sst->addr.pci_cfg + SST_VDRTCTL2);
-	/* enable DTCGE separatelly */
-	reg = readl(sst->addr.pci_cfg + SST_VDRTCTL2);
-	reg |= SST_VDRTCL2_DTCGE;
-	writel(reg, sst->addr.pci_cfg + SST_VDRTCTL2);
+		SST_CLKCTL_MASK, 0);
 
-	/* set shim defaults */
-	hsw_set_shim_defaults(sst);
-
-	/* set D3 */
-	reg = readl(sst->addr.pci_cfg + SST_PMCS);
-	reg |= SST_PMCS_PS_MASK;
-	writel(reg, sst->addr.pci_cfg + SST_PMCS);
+	/* Set D3 state, delay 50 us */
+	val = readl(sst->addr.pci_cfg + SST_PMCS);
+	val |= SST_PMCS_PS_MASK;
+	writel(val, sst->addr.pci_cfg + SST_PMCS);
 	udelay(50);
 
-	/* enable clock core gating */
+	/* Enable core clock gating (VDRTCTL2.DCLCGE = 1), delay 50 us */
 	reg = readl(sst->addr.pci_cfg + SST_VDRTCTL2);
-	reg |= SST_VDRTCL2_DCLCGE;
+	reg |= SST_VDRTCL2_DCLCGE | SST_VDRTCL2_DTCGE;
 	writel(reg, sst->addr.pci_cfg + SST_VDRTCTL2);
+
 	udelay(50);
+
 }
 
 static void hsw_reset(struct sst_dsp *sst)
@@ -346,62 +299,75 @@ static void hsw_reset(struct sst_dsp *sst)
 		SST_CSR_RST | SST_CSR_STALL, SST_CSR_STALL);
 }
 
-/* recommended CSR state for power-up */
-#define SST_CSR_D0_MASK (0x18A09C0C | SST_CSR_DCS_MASK)
-
 static int hsw_set_dsp_D0(struct sst_dsp *sst)
 {
-	u32 reg;
+	int tries = 10;
+	u32 reg, fw_dump_bit;
 
-	/* disable clock core gating */
+	/* Disable core clock gating (VDRTCTL2.DCLCGE = 0) */
 	reg = readl(sst->addr.pci_cfg + SST_VDRTCTL2);
-	reg &= ~(SST_VDRTCL2_DCLCGE);
+	reg &= ~(SST_VDRTCL2_DCLCGE | SST_VDRTCL2_DTCGE);
 	writel(reg, sst->addr.pci_cfg + SST_VDRTCTL2);
 
-	/* switch clock gating */
-	reg = readl(sst->addr.pci_cfg + SST_VDRTCTL2);
-	reg |= SST_VDRTCL2_CG_OTHER;
-	reg &= ~(SST_VDRTCL2_DTCGE);
-	writel(reg, sst->addr.pci_cfg + SST_VDRTCTL2);
+	/* Disable D3PG (VDRTCTL0.D3PGD = 1) */
+	reg = readl(sst->addr.pci_cfg + SST_VDRTCTL0);
+	reg |= SST_VDRTCL0_D3PGD;
+	writel(reg, sst->addr.pci_cfg + SST_VDRTCTL0);
 
-	/* set D0 */
+	/* Set D0 state */
 	reg = readl(sst->addr.pci_cfg + SST_PMCS);
-	reg &= ~(SST_PMCS_PS_MASK);
+	reg &= ~SST_PMCS_PS_MASK;
 	writel(reg, sst->addr.pci_cfg + SST_PMCS);
 
-	/* DRAM power gating none */
-	reg = readl(sst->addr.pci_cfg + SST_VDRTCTL0);
-	reg &= ~(SST_VDRTCL0_ISRAMPGE_MASK |
-		SST_VDRTCL0_DSRAMPGE_MASK);
-	reg |= SST_VDRTCL0_D3SRAMPGD;
-	reg |= SST_VDRTCL0_D3PGD;
-	writel(reg, sst->addr.pci_cfg + SST_VDRTCTL0);
-	mdelay(10);
+	/* check that ADSP shim is enabled */
+	while (tries--) {
+		reg = readl(sst->addr.pci_cfg + SST_PMCS) & SST_PMCS_PS_MASK;
+		if (reg == 0)
+			goto finish;
+
+		msleep(1);
+	}
+
+	return -ENODEV;
 
-	/* set shim defaults */
-	hsw_set_shim_defaults(sst);
+finish:
+	/* select SSP1 19.2MHz base clock, SSP clock 0, turn off Low Power Clock */
+	sst_dsp_shim_update_bits_unlocked(sst, SST_CSR,
+		SST_CSR_S1IOCS | SST_CSR_SBCS1 | SST_CSR_LPCS, 0x0);
+
+	/* stall DSP core, set clk to 192/96Mhz */
+	sst_dsp_shim_update_bits_unlocked(sst,
+		SST_CSR, SST_CSR_STALL | SST_CSR_DCS_MASK,
+		SST_CSR_STALL | SST_CSR_DCS(4));
 
-	/* restore MCLK */
+	/* Set 24MHz MCLK, prevent local clock gating, enable SSP0 clock */
 	sst_dsp_shim_update_bits_unlocked(sst, SST_CLKCTL,
-			SST_CLKCTL_MASK, SST_CLKCTL_MASK);
+		SST_CLKCTL_MASK | SST_CLKCTL_DCPLCG | SST_CLKCTL_SCOE0,
+		SST_CLKCTL_MASK | SST_CLKCTL_DCPLCG | SST_CLKCTL_SCOE0);
 
-	/* PLL shutdown disable */
+	/* Stall and reset core, set CSR */
+	hsw_reset(sst);
+
+	/* Enable core clock gating (VDRTCTL2.DCLCGE = 1), delay 50 us */
 	reg = readl(sst->addr.pci_cfg + SST_VDRTCTL2);
-	reg &= ~(SST_VDRTCL2_APLLSE_MASK);
+	reg |= SST_VDRTCL2_DCLCGE | SST_VDRTCL2_DTCGE;
 	writel(reg, sst->addr.pci_cfg + SST_VDRTCTL2);
 
-	sst_dsp_shim_update_bits_unlocked(sst, SST_CSR,
-			SST_CSR_D0_MASK, SST_CSR_SBCS0 | SST_CSR_SBCS1 |
-			SST_CSR_STALL | SST_CSR_DCS(4));
 	udelay(50);
 
-	/* enable clock core gating */
+	/* switch on audio PLL */
 	reg = readl(sst->addr.pci_cfg + SST_VDRTCTL2);
-	reg |= SST_VDRTCL2_DCLCGE;
+	reg &= ~SST_VDRTCL2_APLLSE_MASK;
 	writel(reg, sst->addr.pci_cfg + SST_VDRTCTL2);
 
-	/* clear reset */
-	sst_dsp_shim_update_bits_unlocked(sst, SST_CSR, SST_CSR_RST, 0);
+	/* set default power gating control, enable power gating control for all blocks. that is,
+	can't be accessed, please enable each block before accessing. */
+	reg = readl(sst->addr.pci_cfg + SST_VDRTCTL0);
+	reg |= SST_VDRTCL0_DSRAMPGE_MASK | SST_VDRTCL0_ISRAMPGE_MASK;
+	/* for D0, always enable the block(DSRAM[0]) used for FW dump */
+	fw_dump_bit = 1 << SST_VDRTCL0_DSRAMPGE_SHIFT;
+	writel(reg & ~fw_dump_bit, sst->addr.pci_cfg + SST_VDRTCTL0);
+
 
 	/* disable DMA finish function for SSP0 & SSP1 */
 	sst_dsp_shim_update_bits_unlocked(sst, SST_CSR2, SST_CSR2_SDFD_SSP1,
@@ -418,6 +384,12 @@ static int hsw_set_dsp_D0(struct sst_dsp *sst)
 	sst_dsp_shim_update_bits(sst, SST_IMRD, (SST_IMRD_DONE | SST_IMRD_BUSY |
 				SST_IMRD_SSP0 | SST_IMRD_DMAC), 0x0);
 
+	/* clear IPC registers */
+	sst_dsp_shim_write(sst, SST_IPCX, 0x0);
+	sst_dsp_shim_write(sst, SST_IPCD, 0x0);
+	sst_dsp_shim_write(sst, 0x80, 0x6);
+	sst_dsp_shim_write(sst, 0xe0, 0x300a);
+
 	return 0;
 }
 
@@ -443,6 +415,11 @@ static void hsw_sleep(struct sst_dsp *sst)
 {
 	dev_dbg(sst->dev, "HSW_PM dsp runtime suspend\n");
 
+	/* put DSP into reset and stall */
+	sst_dsp_shim_update_bits(sst, SST_CSR,
+		SST_CSR_24MHZ_LPCS | SST_CSR_RST | SST_CSR_STALL,
+		SST_CSR_RST | SST_CSR_STALL | SST_CSR_24MHZ_LPCS);
+
 	hsw_set_dsp_D3(sst);
 	dev_dbg(sst->dev, "HSW_PM dsp runtime suspend exit\n");
 }