diff options
Diffstat (limited to 'Documentation/devicetree/bindings/connector/samsung,usb-connector-11pin.txt')
-rw-r--r-- | Documentation/devicetree/bindings/connector/samsung,usb-connector-11pin.txt | 49 |
1 files changed, 0 insertions, 49 deletions
diff --git a/Documentation/devicetree/bindings/connector/samsung,usb-connector-11pin.txt b/Documentation/devicetree/bindings/connector/samsung,usb-connector-11pin.txt deleted file mode 100644 index 3dd8961154ab..000000000000 --- a/Documentation/devicetree/bindings/connector/samsung,usb-connector-11pin.txt +++ /dev/null @@ -1,49 +0,0 @@ -Samsung micro-USB 11-pin connector -================================== - -Samsung micro-USB 11-pin connector is an extension of micro-USB connector. -It is present in multiple Samsung mobile devices. -It has additional pins to route MHL traffic simultanously with USB. - -The bindings are superset of usb-connector bindings for micro-USB connector[1]. - -Required properties: -- compatible: must be: "samsung,usb-connector-11pin", "usb-b-connector", -- type: must be "micro". - -Required nodes: -- any data bus to the connector should be modeled using the OF graph bindings - specified in bindings/graph.txt, unless the bus is between parent node and - the connector. Since single connector can have multpile data buses every bus - has assigned OF graph port number as follows: - 0: High Speed (HS), - 3: Mobile High-Definition Link (MHL), specific to 11-pin Samsung micro-USB. - -[1]: bindings/connector/usb-connector.yaml - -Example -------- - -Micro-USB connector with HS lines routed via controller (MUIC) and MHL lines -connected to HDMI-MHL bridge (sii8620): - -muic-max77843@66 { - ... - usb_con: connector { - compatible = "samsung,usb-connector-11pin", "usb-b-connector"; - label = "micro-USB"; - type = "micro"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@3 { - reg = <3>; - usb_con_mhl: endpoint { - remote-endpoint = <&sii8620_mhl>; - }; - }; - }; - }; -}; |