summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml')
-rw-r--r--Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml75
1 files changed, 75 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml b/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml
new file mode 100644
index 000000000000..ff9546e95d05
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/aptina,mt9v111.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aptina MT9V111 CMOS sensor
+
+maintainers:
+ - Jacopo Mondi <jacopo@jmondi.org>
+
+description: |
+ The Aptina MT9V111 is a 1/4-Inch VGA-format digital image sensor with a core
+ based on Aptina MT9V011 sensor and an integrated Image Flow Processor (IFP).
+
+ The sensor has an active pixel array of 640x480 pixels and can output a number
+ of image resolutions and formats controllable through a simple two-wires
+ interface.
+
+properties:
+ compatible:
+ const: aptina,mt9v111
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ enable-gpios:
+ description: Enable signal, pin name "OE#". Active low.
+ maxItems: 1
+
+ standby-gpios:
+ description: |
+ Low power state control signal, pin name "STANDBY". Active high.
+ maxItems: 1
+
+ reset-gpios:
+ description: Chip reset signal, pin name "RESET#". Active low.
+ maxItems: 1
+
+ port:
+ type: object
+ description: |
+ Output video port. See ../video-interfaces.txt.
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ camera@48 {
+ compatible = "aptina,mt9v111";
+ reg = <0x48>;
+ clocks = <&camera_clk>;
+
+ port {
+ mt9v111_out: endpoint {
+ remote-endpoint = <&ceu_in>;
+ };
+ };
+ };
+ };
+
+...