diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt')
-rw-r--r-- | Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt | 45 |
1 files changed, 0 insertions, 45 deletions
diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt deleted file mode 100644 index 9306c4dadd46..000000000000 --- a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt +++ /dev/null @@ -1,45 +0,0 @@ -TI Wilink 6/7/8 (wl12xx/wl18xx) SDIO devices - -This node provides properties for controlling the wilink wireless device. The -node is expected to be specified as a child node to the SDIO controller that -connects the device to the system. - -Required properties: - - compatible: should be one of the following: - * "ti,wl1271" - * "ti,wl1273" - * "ti,wl1281" - * "ti,wl1283" - * "ti,wl1285" - * "ti,wl1801" - * "ti,wl1805" - * "ti,wl1807" - * "ti,wl1831" - * "ti,wl1835" - * "ti,wl1837" - - interrupts : specifies attributes for the out-of-band interrupt. - -Optional properties: - - ref-clock-frequency : ref clock frequency in Hz - - tcxo-clock-frequency : tcxo clock frequency in Hz - -Note: the *-clock-frequency properties assume internal clocks. In case of external -clock, new bindings (for parsing the clock nodes) have to be added. - -Example: - -&mmc3 { - vmmc-supply = <&wlan_en_reg>; - bus-width = <4>; - cap-power-off-card; - keep-power-in-suspend; - - #address-cells = <1>; - #size-cells = <0>; - wlcore: wlcore@2 { - compatible = "ti,wl1835"; - reg = <2>; - interrupt-parent = <&gpio0>; - interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; - }; -}; |