diff options
Diffstat (limited to 'Documentation/devicetree/bindings/pinctrl/mediatek,mt7981-pinctrl.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/pinctrl/mediatek,mt7981-pinctrl.yaml | 35 |
1 files changed, 20 insertions, 15 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7981-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7981-pinctrl.yaml index 74c66fbcb2ae..10717cee9058 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7981-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7981-pinctrl.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/pinctrl/mediatek,mt7981-pinctrl.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Mediatek MT7981 Pin Controller +title: MediaTek MT7981 Pin Controller maintainers: - Daniel Golle <daniel@makrotopia.org> @@ -37,7 +37,7 @@ properties: "#gpio-cells": const: 2 - description: > + description: Number of cells in GPIO specifier. Since the generic GPIO binding is used, the amount of cells must be specified as 2. See the below mentioned gpio binding representation for description of particular cells. @@ -111,7 +111,9 @@ patternProperties: "watchdog1" "watchdog" 13 "udi" "udi" 9, 10, 11, 12, 13 "drv_vbus" "usb" 14 - "emmc_45" "flash" 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25 + "emmc_45" "flash" 15, 16, 17, 18, 19, 20, 21, 22, 23, + 24, 25 + "snfi" "flash" 16, 17, 18, 19, 20, 21 "spi0" "spi" 16, 17, 18, 19 "spi0_wp_hold" "spi" 20, 21 @@ -148,7 +150,7 @@ patternProperties: "wf5g_led0" "led" 31 "wf5g_led1" "led" 35 "mt7531_int" "eth" 38 - "ant_sel" "ant" 14, 15, 16, 17, 18, 19, 20, 21, 22 + "ant_sel" "ant" 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 34, 35 $ref: /schemas/pinctrl/pinmux-node.yaml @@ -256,7 +258,8 @@ patternProperties: then: properties: groups: - enum: [gbe_led0, gbe_led1, wf2g_led0, wf2g_led1, wf5g_led0, wf5g_led1] + enum: [gbe_led0, gbe_led1, wf2g_led0, wf2g_led1, wf5g_led0, + wf5g_led1] - if: properties: function: @@ -275,7 +278,8 @@ patternProperties: properties: groups: items: - enum: [spi1_0, spi0, spi0_wp_hold, spi1_1, spi2, spi2_wp_hold] + enum: [spi1_0, spi0, spi0_wp_hold, spi1_1, spi2, + spi2_wp_hold] maxItems: 4 - if: properties: @@ -332,13 +336,14 @@ patternProperties: JTAG_JTDO, JTAG_JTDI, JTAG_JTMS, JTAG_JTCLK, JTAG_JTRST_N, WO_JTAG_JTDO, WO_JTAG_JTDI, WO_JTAG_JTMS, WO_JTAG_JTCLK, WO_JTAG_JTRST_N, USB_VBUS, PWM0, SPI0_CLK, SPI0_MOSI, - SPI0_MISO, SPI0_CS, SPI0_HOLD, SPI0_WP, SPI1_CLK, SPI1_MOSI, - SPI1_MISO, SPI1_CS, SPI2_CLK, SPI2_MOSI, SPI2_MISO, SPI2_CS, - SPI2_HOLD, SPI2_WP, UART0_RXD, UART0_TXD, PCIE_CLK_REQ, - PCIE_WAKE_N, SMI_MDC, SMI_MDIO, GBE_INT, GBE_RESET, - WF_DIG_RESETB, WF_CBA_RESETB, WF_XO_REQ, WF_TOP_CLK, - WF_TOP_DATA, WF_HB1, WF_HB2, WF_HB3, WF_HB4, WF_HB0, - WF_HB0_B, WF_HB5, WF_HB6, WF_HB7, WF_HB8, WF_HB9, WF_HB10] + SPI0_MISO, SPI0_CS, SPI0_HOLD, SPI0_WP, SPI1_CLK, + SPI1_MOSI, SPI1_MISO, SPI1_CS, SPI2_CLK, SPI2_MOSI, + SPI2_MISO, SPI2_CS, SPI2_HOLD, SPI2_WP, UART0_RXD, + UART0_TXD, PCIE_CLK_REQ, PCIE_WAKE_N, SMI_MDC, SMI_MDIO, + GBE_INT, GBE_RESET, WF_DIG_RESETB, WF_CBA_RESETB, + WF_XO_REQ, WF_TOP_CLK, WF_TOP_DATA, WF_HB1, WF_HB2, WF_HB3, + WF_HB4, WF_HB0, WF_HB0_B, WF_HB5, WF_HB6, WF_HB7, WF_HB8, + WF_HB9, WF_HB10] maxItems: 57 bias-disable: true @@ -348,7 +353,7 @@ patternProperties: - type: boolean description: normal pull up. - enum: [100, 101, 102, 103] - description: > + description: PUPD/R1/R0 pull down type. See MTK_PUPD_SET_R1R0 defines in dt-bindings/pinctrl/mt65xx.h. @@ -357,7 +362,7 @@ patternProperties: - type: boolean description: normal pull down. - enum: [100, 101, 102, 103] - description: > + description: PUPD/R1/R0 pull down type. See MTK_PUPD_SET_R1R0 defines in dt-bindings/pinctrl/mt65xx.h. |