summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/omap4.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/omap4.dtsi')
-rw-r--r--arch/arm/boot/dts/omap4.dtsi203
1 files changed, 173 insertions, 30 deletions
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 04cbbcb6ff91..3883f94fdbd0 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -30,12 +30,35 @@
cpus {
cpu@0 {
compatible = "arm,cortex-a9";
+ next-level-cache = <&L2>;
};
cpu@1 {
compatible = "arm,cortex-a9";
+ next-level-cache = <&L2>;
};
};
+ gic: interrupt-controller@48241000 {
+ compatible = "arm,cortex-a9-gic";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x48241000 0x1000>,
+ <0x48240100 0x0100>;
+ };
+
+ L2: l2-cache-controller@48242000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x48242000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ local-timer@0x48240600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0x48240600 0x20>;
+ interrupts = <1 13 0x304>;
+ };
+
/*
* The soc node represents the soc top level view. It is uses for IPs
* that are not memory mapped in the MPU view or for the MPU itself.
@@ -61,30 +84,6 @@
/*
* XXX: Use a flat representation of the OMAP4 interconnect.
* The real OMAP interconnect network is quite complex.
- *
- * MPU -+-- MPU_PRIVATE - GIC, L2
- * |
- * +----------------+----------+
- * | | |
- * + +- EMIF - DDR |
- * | | |
- * | + +--------+
- * | | |
- * | +- L4_ABE - AESS, MCBSP, TIMERs...
- * | |
- * +- L3_MAIN --+- L4_CORE - IPs...
- * |
- * +- L4_PER - IPs...
- * |
- * +- L4_CFG -+- L4_WKUP - IPs...
- * | |
- * | +- IPs...
- * +- IPU ----+
- * | |
- * +- DSP ----+
- * | |
- * +- DSS ----+
- *
* Since that will not bring real advantage to represent that in DT for
* the moment, just use a fake OCP bus entry to represent the whole bus
* hierarchy.
@@ -96,16 +95,27 @@
ranges;
ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
- gic: interrupt-controller@48241000 {
- compatible = "arm,cortex-a9-gic";
- interrupt-controller;
- #interrupt-cells = <3>;
- reg = <0x48241000 0x1000>,
- <0x48240100 0x0100>;
+ omap4_pmx_core: pinmux@4a100040 {
+ compatible = "ti,omap4-padconf", "pinctrl-single";
+ reg = <0x4a100040 0x0196>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0x7fff>;
+ };
+ omap4_pmx_wkup: pinmux@4a31e040 {
+ compatible = "ti,omap4-padconf", "pinctrl-single";
+ reg = <0x4a31e040 0x0038>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0x7fff>;
};
gpio1: gpio@4a310000 {
compatible = "ti,omap4-gpio";
+ reg = <0x4a310000 0x200>;
+ interrupts = <0 29 0x4>;
ti,hwmods = "gpio1";
gpio-controller;
#gpio-cells = <2>;
@@ -115,6 +125,8 @@
gpio2: gpio@48055000 {
compatible = "ti,omap4-gpio";
+ reg = <0x48055000 0x200>;
+ interrupts = <0 30 0x4>;
ti,hwmods = "gpio2";
gpio-controller;
#gpio-cells = <2>;
@@ -124,6 +136,8 @@
gpio3: gpio@48057000 {
compatible = "ti,omap4-gpio";
+ reg = <0x48057000 0x200>;
+ interrupts = <0 31 0x4>;
ti,hwmods = "gpio3";
gpio-controller;
#gpio-cells = <2>;
@@ -133,6 +147,8 @@
gpio4: gpio@48059000 {
compatible = "ti,omap4-gpio";
+ reg = <0x48059000 0x200>;
+ interrupts = <0 32 0x4>;
ti,hwmods = "gpio4";
gpio-controller;
#gpio-cells = <2>;
@@ -142,6 +158,8 @@
gpio5: gpio@4805b000 {
compatible = "ti,omap4-gpio";
+ reg = <0x4805b000 0x200>;
+ interrupts = <0 33 0x4>;
ti,hwmods = "gpio5";
gpio-controller;
#gpio-cells = <2>;
@@ -151,6 +169,8 @@
gpio6: gpio@4805d000 {
compatible = "ti,omap4-gpio";
+ reg = <0x4805d000 0x200>;
+ interrupts = <0 34 0x4>;
ti,hwmods = "gpio6";
gpio-controller;
#gpio-cells = <2>;
@@ -160,30 +180,40 @@
uart1: serial@4806a000 {
compatible = "ti,omap4-uart";
+ reg = <0x4806a000 0x100>;
+ interrupts = <0 72 0x4>;
ti,hwmods = "uart1";
clock-frequency = <48000000>;
};
uart2: serial@4806c000 {
compatible = "ti,omap4-uart";
+ reg = <0x4806c000 0x100>;
+ interrupts = <0 73 0x4>;
ti,hwmods = "uart2";
clock-frequency = <48000000>;
};
uart3: serial@48020000 {
compatible = "ti,omap4-uart";
+ reg = <0x48020000 0x100>;
+ interrupts = <0 74 0x4>;
ti,hwmods = "uart3";
clock-frequency = <48000000>;
};
uart4: serial@4806e000 {
compatible = "ti,omap4-uart";
+ reg = <0x4806e000 0x100>;
+ interrupts = <0 70 0x4>;
ti,hwmods = "uart4";
clock-frequency = <48000000>;
};
i2c1: i2c@48070000 {
compatible = "ti,omap4-i2c";
+ reg = <0x48070000 0x100>;
+ interrupts = <0 56 0x4>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c1";
@@ -191,6 +221,8 @@
i2c2: i2c@48072000 {
compatible = "ti,omap4-i2c";
+ reg = <0x48072000 0x100>;
+ interrupts = <0 57 0x4>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c2";
@@ -198,6 +230,8 @@
i2c3: i2c@48060000 {
compatible = "ti,omap4-i2c";
+ reg = <0x48060000 0x100>;
+ interrupts = <0 61 0x4>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c3";
@@ -205,6 +239,8 @@
i2c4: i2c@48350000 {
compatible = "ti,omap4-i2c";
+ reg = <0x48350000 0x100>;
+ interrupts = <0 62 0x4>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c4";
@@ -212,6 +248,8 @@
mcspi1: spi@48098000 {
compatible = "ti,omap4-mcspi";
+ reg = <0x48098000 0x200>;
+ interrupts = <0 65 0x4>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "mcspi1";
@@ -220,6 +258,8 @@
mcspi2: spi@4809a000 {
compatible = "ti,omap4-mcspi";
+ reg = <0x4809a000 0x200>;
+ interrupts = <0 66 0x4>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "mcspi2";
@@ -228,6 +268,8 @@
mcspi3: spi@480b8000 {
compatible = "ti,omap4-mcspi";
+ reg = <0x480b8000 0x200>;
+ interrupts = <0 91 0x4>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "mcspi3";
@@ -236,6 +278,8 @@
mcspi4: spi@480ba000 {
compatible = "ti,omap4-mcspi";
+ reg = <0x480ba000 0x200>;
+ interrupts = <0 48 0x4>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "mcspi4";
@@ -244,6 +288,8 @@
mmc1: mmc@4809c000 {
compatible = "ti,omap4-hsmmc";
+ reg = <0x4809c000 0x400>;
+ interrupts = <0 83 0x4>;
ti,hwmods = "mmc1";
ti,dual-volt;
ti,needs-special-reset;
@@ -251,30 +297,40 @@
mmc2: mmc@480b4000 {
compatible = "ti,omap4-hsmmc";
+ reg = <0x480b4000 0x400>;
+ interrupts = <0 86 0x4>;
ti,hwmods = "mmc2";
ti,needs-special-reset;
};
mmc3: mmc@480ad000 {
compatible = "ti,omap4-hsmmc";
+ reg = <0x480ad000 0x400>;
+ interrupts = <0 94 0x4>;
ti,hwmods = "mmc3";
ti,needs-special-reset;
};
mmc4: mmc@480d1000 {
compatible = "ti,omap4-hsmmc";
+ reg = <0x480d1000 0x400>;
+ interrupts = <0 96 0x4>;
ti,hwmods = "mmc4";
ti,needs-special-reset;
};
mmc5: mmc@480d5000 {
compatible = "ti,omap4-hsmmc";
+ reg = <0x480d5000 0x400>;
+ interrupts = <0 59 0x4>;
ti,hwmods = "mmc5";
ti,needs-special-reset;
};
wdt2: wdt@4a314000 {
compatible = "ti,omap4-wdt", "ti,omap3-wdt";
+ reg = <0x4a314000 0x80>;
+ interrupts = <0 80 0x4>;
ti,hwmods = "wd_timer2";
};
@@ -282,6 +338,7 @@
compatible = "ti,omap4-mcpdm";
reg = <0x40132000 0x7f>, /* MPU private access */
<0x49032000 0x7f>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
interrupts = <0 112 0x4>;
interrupt-parent = <&gic>;
ti,hwmods = "mcpdm";
@@ -291,9 +348,95 @@
compatible = "ti,omap4-dmic";
reg = <0x4012e000 0x7f>, /* MPU private access */
<0x4902e000 0x7f>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
interrupts = <0 114 0x4>;
interrupt-parent = <&gic>;
ti,hwmods = "dmic";
};
+
+ mcbsp1: mcbsp@40122000 {
+ compatible = "ti,omap4-mcbsp";
+ reg = <0x40122000 0xff>, /* MPU private access */
+ <0x49022000 0xff>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
+ interrupts = <0 17 0x4>;
+ interrupt-names = "common";
+ interrupt-parent = <&gic>;
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp1";
+ };
+
+ mcbsp2: mcbsp@40124000 {
+ compatible = "ti,omap4-mcbsp";
+ reg = <0x40124000 0xff>, /* MPU private access */
+ <0x49024000 0xff>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
+ interrupts = <0 22 0x4>;
+ interrupt-names = "common";
+ interrupt-parent = <&gic>;
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp2";
+ };
+
+ mcbsp3: mcbsp@40126000 {
+ compatible = "ti,omap4-mcbsp";
+ reg = <0x40126000 0xff>, /* MPU private access */
+ <0x49026000 0xff>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
+ interrupts = <0 23 0x4>;
+ interrupt-names = "common";
+ interrupt-parent = <&gic>;
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp3";
+ };
+
+ mcbsp4: mcbsp@48096000 {
+ compatible = "ti,omap4-mcbsp";
+ reg = <0x48096000 0xff>; /* L4 Interconnect */
+ reg-names = "mpu";
+ interrupts = <0 16 0x4>;
+ interrupt-names = "common";
+ interrupt-parent = <&gic>;
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp4";
+ };
+
+ keypad: keypad@4a31c000 {
+ compatible = "ti,omap4-keypad";
+ reg = <0x4a31c000 0x80>;
+ interrupts = <0 120 0x4>;
+ reg-names = "mpu";
+ ti,hwmods = "kbd";
+ };
+
+ emif1: emif@4c000000 {
+ compatible = "ti,emif-4d";
+ reg = <0x4c000000 0x100>;
+ interrupts = <0 110 0x4>;
+ ti,hwmods = "emif1";
+ phy-type = <1>;
+ hw-caps-read-idle-ctrl;
+ hw-caps-ll-interface;
+ hw-caps-temp-alert;
+ };
+
+ emif2: emif@4d000000 {
+ compatible = "ti,emif-4d";
+ reg = <0x4d000000 0x100>;
+ interrupts = <0 111 0x4>;
+ ti,hwmods = "emif2";
+ phy-type = <1>;
+ hw-caps-read-idle-ctrl;
+ hw-caps-ll-interface;
+ hw-caps-temp-alert;
+ };
+
+ ocp2scp {
+ compatible = "ti,omap-ocp2scp";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ ti,hwmods = "ocp2scp_usb_phy";
+ };
};
};