summaryrefslogtreecommitdiff
path: root/arch/arm/mach-davinci/include/mach/spi.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-davinci/include/mach/spi.h')
-rw-r--r--arch/arm/mach-davinci/include/mach/spi.h89
1 files changed, 0 insertions, 89 deletions
diff --git a/arch/arm/mach-davinci/include/mach/spi.h b/arch/arm/mach-davinci/include/mach/spi.h
deleted file mode 100644
index 7af305b37868..000000000000
--- a/arch/arm/mach-davinci/include/mach/spi.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * Copyright 2009 Texas Instruments.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ARCH_ARM_DAVINCI_SPI_H
-#define __ARCH_ARM_DAVINCI_SPI_H
-
-#include <mach/edma.h>
-
-#define SPI_INTERN_CS 0xFF
-
-enum {
- SPI_VERSION_1, /* For DM355/DM365/DM6467 */
- SPI_VERSION_2, /* For DA8xx */
-};
-
-/**
- * davinci_spi_platform_data - Platform data for SPI master device on DaVinci
- *
- * @version: version of the SPI IP. Different DaVinci devices have slightly
- * varying versions of the same IP.
- * @num_chipselect: number of chipselects supported by this SPI master
- * @intr_line: interrupt line used to connect the SPI IP to the ARM interrupt
- * controller withn the SoC. Possible values are 0 and 1.
- * @chip_sel: list of GPIOs which can act as chip-selects for the SPI.
- * SPI_INTERN_CS denotes internal SPI chip-select. Not necessary
- * to populate if all chip-selects are internal.
- * @cshold_bug: set this to true if the SPI controller on your chip requires
- * a write to CSHOLD bit in between transfers (like in DM355).
- * @dma_event_q: DMA event queue to use if SPI_IO_TYPE_DMA is used for any
- * device on the bus.
- */
-struct davinci_spi_platform_data {
- u8 version;
- u8 num_chipselect;
- u8 intr_line;
- u8 *chip_sel;
- bool cshold_bug;
- enum dma_event_q dma_event_q;
-};
-
-/**
- * davinci_spi_config - Per-chip-select configuration for SPI slave devices
- *
- * @wdelay: amount of delay between transmissions. Measured in number of
- * SPI module clocks.
- * @odd_parity: polarity of parity flag at the end of transmit data stream.
- * 0 - odd parity, 1 - even parity.
- * @parity_enable: enable transmission of parity at end of each transmit
- * data stream.
- * @io_type: type of IO transfer. Choose between polled, interrupt and DMA.
- * @timer_disable: disable chip-select timers (setup and hold)
- * @c2tdelay: chip-select setup time. Measured in number of SPI module clocks.
- * @t2cdelay: chip-select hold time. Measured in number of SPI module clocks.
- * @t2edelay: transmit data finished to SPI ENAn pin inactive time. Measured
- * in number of SPI clocks.
- * @c2edelay: chip-select active to SPI ENAn signal active time. Measured in
- * number of SPI clocks.
- */
-struct davinci_spi_config {
- u8 wdelay;
- u8 odd_parity;
- u8 parity_enable;
-#define SPI_IO_TYPE_INTR 0
-#define SPI_IO_TYPE_POLL 1
-#define SPI_IO_TYPE_DMA 2
- u8 io_type;
- u8 timer_disable;
- u8 c2tdelay;
- u8 t2cdelay;
- u8 t2edelay;
- u8 c2edelay;
-};
-
-#endif /* __ARCH_ARM_DAVINCI_SPI_H */