diff options
Diffstat (limited to 'arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts')
| -rw-r--r-- | arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts | 88 |
1 files changed, 85 insertions, 3 deletions
diff --git a/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts index e5d9b671a405..4b5f6cf16f70 100644 --- a/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts +++ b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts @@ -140,6 +140,38 @@ }; }; +&cpu0 { + cpu-supply = <&mt6359_vcore_buck_reg>; +}; + +&cpu1 { + cpu-supply = <&mt6359_vcore_buck_reg>; +}; + +&cpu2 { + cpu-supply = <&mt6359_vcore_buck_reg>; +}; + +&cpu3 { + cpu-supply = <&mt6359_vcore_buck_reg>; +}; + +&cpu4 { + cpu-supply = <&mt6315_6_vbuck1>; +}; + +&cpu5 { + cpu-supply = <&mt6315_6_vbuck1>; +}; + +&cpu6 { + cpu-supply = <&mt6315_6_vbuck1>; +}; + +&cpu7 { + cpu-supply = <&mt6315_6_vbuck1>; +}; + ð { phy-mode = "rgmii-rxid"; phy-handle = <&rgmii_phy>; @@ -343,6 +375,14 @@ }; }; +&mfg0 { + domain-supply = <&mt6315_7_vbuck1>; +}; + +&mfg1 { + domain-supply = <&mt6359_vsram_others_ldo_reg>; +}; + /* MMC0 Controller: eMMC (HS400). Power lines are shared with UFS! */ &mmc0 { pinctrl-names = "default", "state_uhs"; @@ -434,6 +474,8 @@ }; &pio { + mediatek,rsel-resistance-in-si-unit; + eth_default_pins: eth-default-pins { pins-cc { pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>, @@ -509,7 +551,7 @@ pins-bus { pinmux = <PINMUX_GPIO12__FUNC_SDA2>, <PINMUX_GPIO13__FUNC_SCL2>; - bias-pull-up = <MTK_PULL_SET_RSEL_111>; + bias-pull-up = <1000>; drive-strength = <6>; drive-strength-microamp = <1000>; }; @@ -519,7 +561,7 @@ pins-bus { pinmux = <PINMUX_GPIO16__FUNC_SDA4>, <PINMUX_GPIO17__FUNC_SCL4>; - bias-pull-up = <MTK_PULL_SET_RSEL_111>; + bias-pull-up = <1000>; drive-strength-microamp = <1000>; }; }; @@ -528,7 +570,7 @@ pins { pinmux = <PINMUX_GPIO25__FUNC_SDA6>, <PINMUX_GPIO26__FUNC_SCL6>; - bias-pull-up = <MTK_PULL_SET_RSEL_111>; + bias-disable; }; }; @@ -683,6 +725,26 @@ }; }; + usb3_port0_pins: usb3p0-default-pins { + pins-vbus { + pinmux = <PINMUX_GPIO63__FUNC_VBUSVALID>; + input-enable; + }; + }; + + usb2_port0_pins: usb2p0-default-pins { + pins-iddig { + pinmux = <PINMUX_GPIO130__FUNC_IDDIG_1P>; + input-enable; + bias-pull-up; + }; + + pins-vbus { + pinmux = <PINMUX_GPIO131__FUNC_USB_DRVVBUS_1P>; + output-low; + }; + }; + wifi_vreg_pins: wifi-vreg-pins { pins-wifi-pmu-en { pinmux = <PINMUX_GPIO65__FUNC_GPIO65>; @@ -707,6 +769,10 @@ status = "okay"; }; +&pciephy { + status = "okay"; +}; + &pmic { interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>; }; @@ -774,6 +840,18 @@ }; }; +&u3phy0 { + status = "okay"; +}; + +&u3phy1 { + status = "okay"; +}; + +&u3phy2 { + status = "okay"; +}; + &uart0 { /* Exposed at 40 pin connector */ pinctrl-0 = <&uart0_pins>; @@ -789,6 +867,8 @@ }; &ssusb0 { + pinctrl-names = "default"; + pinctrl-0 = <&usb3_port0_pins>; role-switch-default-mode = "host"; usb-role-switch; vusb33-supply = <&mt6359_vusb_ldo_reg>; @@ -802,6 +882,8 @@ }; &ssusb2 { + pinctrl-names = "default"; + pinctrl-0 = <&usb2_port0_pins>; vusb33-supply = <&mt6359_vusb_ldo_reg>; status = "okay"; }; |