summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/qcom/sm8250.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sm8250.dtsi')
-rw-r--r--arch/arm64/boot/dts/qcom/sm8250.dtsi142
1 files changed, 86 insertions, 56 deletions
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 7f2333c9d17d..630f4eff20bf 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -8,8 +8,6 @@
#include <dt-bindings/clock/qcom,gcc-sm8250.h>
#include <dt-bindings/clock/qcom,gpucc-sm8250.h>
#include <dt-bindings/clock/qcom,rpmh.h>
-#include <dt-bindings/clock/qcom,sm8250-lpass-aoncc.h>
-#include <dt-bindings/clock/qcom,sm8250-lpass-audiocc.h>
#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interconnect/qcom,osm-l3.h>
@@ -2203,6 +2201,16 @@
dma-coherent;
status = "disabled";
+
+ pcieport0: pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};
pcie0_phy: phy@1c06000 {
@@ -2318,6 +2326,16 @@
dma-coherent;
status = "disabled";
+
+ pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};
pcie1_phy: phy@1c0e000 {
@@ -2433,6 +2451,16 @@
dma-coherent;
status = "disabled";
+
+ pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};
pcie2_phy: phy@1c16000 {
@@ -2550,6 +2578,8 @@
resets = <&ufs_mem_hc 0>;
reset-names = "ufsphy";
+ power-domains = <&gcc UFS_PHY_GDSC>;
+
#phy-cells = <0>;
status = "disabled";
@@ -2601,14 +2631,13 @@
wsamacro: codec@3240000 {
compatible = "qcom,sm8250-lpass-wsa-macro";
reg = <0 0x03240000 0 0x1000>;
- clocks = <&audiocc LPASS_CDC_WSA_MCLK>,
- <&audiocc LPASS_CDC_WSA_NPL>,
+ clocks = <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
- <&aoncc LPASS_CDC_VA_MCLK>,
<&vamacro>;
- clock-names = "mclk", "npl", "macro", "dcodec", "va", "fsgen";
+ clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
#clock-cells = <0>;
clock-output-names = "mclk";
@@ -2642,20 +2671,10 @@
status = "disabled";
};
- audiocc: clock-controller@3300000 {
- compatible = "qcom,sm8250-lpass-audiocc";
- reg = <0 0x03300000 0 0x30000>;
- #clock-cells = <1>;
- clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
- <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
- <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
- clock-names = "core", "audio", "bus";
- };
-
vamacro: codec@3370000 {
compatible = "qcom,sm8250-lpass-va-macro";
reg = <0 0x03370000 0 0x1000>;
- clocks = <&aoncc LPASS_CDC_VA_MCLK>,
+ clocks = <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
@@ -2760,16 +2779,6 @@
#size-cells = <0>;
};
- aoncc: clock-controller@3380000 {
- compatible = "qcom,sm8250-lpass-aoncc";
- reg = <0 0x03380000 0 0x40000>;
- #clock-cells = <1>;
- clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
- <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
- <&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
- clock-names = "core", "audio", "bus";
- };
-
lpass_tlmm: pinctrl@33c0000 {
compatible = "qcom,sm8250-lpass-lpi-pinctrl";
reg = <0 0x033c0000 0x0 0x20000>,
@@ -3906,6 +3915,8 @@
#clock-cells = <1>;
#phy-cells = <1>;
+ orientation-switch;
+
ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -3917,6 +3928,10 @@
port@1 {
reg = <1>;
+
+ usb_1_qmpphy_usb_ss_in: endpoint {
+ remote-endpoint = <&usb_1_dwc3_ss_out>;
+ };
};
port@2 {
@@ -4195,8 +4210,24 @@
phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
phy-names = "usb2-phy", "usb3-phy";
- port {
- usb_1_role_switch_out: endpoint {};
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_1_dwc3_hs_out: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usb_1_dwc3_ss_out: endpoint {
+ remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
+ };
+ };
};
};
};
@@ -6245,7 +6276,6 @@
thermal-zones {
cpu0-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens0 1>;
@@ -6289,7 +6319,6 @@
cpu1-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens0 2>;
@@ -6333,7 +6362,6 @@
cpu2-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens0 3>;
@@ -6377,7 +6405,6 @@
cpu3-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens0 4>;
@@ -6421,7 +6448,6 @@
cpu4-top-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens0 7>;
@@ -6465,7 +6491,6 @@
cpu5-top-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens0 8>;
@@ -6509,7 +6534,6 @@
cpu6-top-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens0 9>;
@@ -6553,7 +6577,6 @@
cpu7-top-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens0 10>;
@@ -6597,7 +6620,6 @@
cpu4-bottom-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens0 11>;
@@ -6641,7 +6663,6 @@
cpu5-bottom-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens0 12>;
@@ -6685,7 +6706,6 @@
cpu6-bottom-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens0 13>;
@@ -6729,7 +6749,6 @@
cpu7-bottom-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens0 14>;
@@ -6773,7 +6792,6 @@
aoss0-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens0 0>;
@@ -6788,7 +6806,6 @@
cluster0-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens0 5>;
@@ -6808,7 +6825,6 @@
cluster1-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens0 6>;
@@ -6828,7 +6844,6 @@
gpu-top-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens0 15>;
@@ -6841,16 +6856,27 @@
trips {
gpu_top_alert0: trip-point0 {
+ temperature = <85000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ trip-point1 {
temperature = <90000>;
- hysteresis = <2000>;
+ hysteresis = <1000>;
type = "hot";
};
+
+ trip-point2 {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
};
};
aoss1-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens1 0>;
@@ -6865,7 +6891,6 @@
wlan-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens1 1>;
@@ -6880,7 +6905,6 @@
video-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens1 2>;
@@ -6895,7 +6919,6 @@
mem-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens1 3>;
@@ -6910,7 +6933,6 @@
q6-hvx-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens1 4>;
@@ -6925,7 +6947,6 @@
camera-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens1 5>;
@@ -6940,7 +6961,6 @@
compute-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens1 6>;
@@ -6955,7 +6975,6 @@
npu-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens1 7>;
@@ -6970,7 +6989,6 @@
gpu-bottom-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens1 8>;
@@ -6983,10 +7001,22 @@
trips {
gpu_bottom_alert0: trip-point0 {
+ temperature = <85000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ trip-point1 {
temperature = <90000>;
- hysteresis = <2000>;
+ hysteresis = <1000>;
type = "hot";
};
+
+ trip-point2 {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
};
};
};
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-01 01:45:11 +0300