summaryrefslogtreecommitdiff
path: root/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c')
-rw-r--r--arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c554
1 files changed, 554 insertions, 0 deletions
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c b/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c
new file mode 100644
index 000000000000..0c0bf5d30e70
--- /dev/null
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c
@@ -0,0 +1,554 @@
+/***********************license start***************
+ * Author: Cavium Networks
+ *
+ * Contact: support@caviumnetworks.com
+ * This file is part of the OCTEON SDK
+ *
+ * Copyright (c) 2003-2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this file; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * or visit http://www.gnu.org/licenses/.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium Networks for more information
+ ***********************license end**************************************/
+
+/*
+ * Functions for SGMII initialization, configuration,
+ * and monitoring.
+ */
+
+#include <asm/octeon/octeon.h>
+
+#include <asm/octeon/cvmx-config.h>
+
+#include <asm/octeon/cvmx-mdio.h>
+#include <asm/octeon/cvmx-helper.h>
+#include <asm/octeon/cvmx-helper-board.h>
+
+#include <asm/octeon/cvmx-gmxx-defs.h>
+#include <asm/octeon/cvmx-pcsx-defs.h>
+
+void __cvmx_interrupt_gmxx_enable(int interface);
+void __cvmx_interrupt_pcsx_intx_en_reg_enable(int index, int block);
+void __cvmx_interrupt_pcsxx_int_en_reg_enable(int index);
+
+/**
+ * Perform initialization required only once for an SGMII port.
+ *
+ * @interface: Interface to init
+ * @index: Index of prot on the interface
+ *
+ * Returns Zero on success, negative on failure
+ */
+static int __cvmx_helper_sgmii_hardware_init_one_time(int interface, int index)
+{
+ const uint64_t clock_mhz = cvmx_sysinfo_get()->cpu_clock_hz / 1000000;
+ union cvmx_pcsx_miscx_ctl_reg pcs_misc_ctl_reg;
+ union cvmx_pcsx_linkx_timer_count_reg pcsx_linkx_timer_count_reg;
+ union cvmx_gmxx_prtx_cfg gmxx_prtx_cfg;
+
+ /* Disable GMX */
+ gmxx_prtx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface));
+ gmxx_prtx_cfg.s.en = 0;
+ cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), gmxx_prtx_cfg.u64);
+
+ /*
+ * Write PCS*_LINK*_TIMER_COUNT_REG[COUNT] with the
+ * appropriate value. 1000BASE-X specifies a 10ms
+ * interval. SGMII specifies a 1.6ms interval.
+ */
+ pcs_misc_ctl_reg.u64 =
+ cvmx_read_csr(CVMX_PCSX_MISCX_CTL_REG(index, interface));
+ pcsx_linkx_timer_count_reg.u64 =
+ cvmx_read_csr(CVMX_PCSX_LINKX_TIMER_COUNT_REG(index, interface));
+ if (pcs_misc_ctl_reg.s.mode) {
+ /* 1000BASE-X */
+ pcsx_linkx_timer_count_reg.s.count =
+ (10000ull * clock_mhz) >> 10;
+ } else {
+ /* SGMII */
+ pcsx_linkx_timer_count_reg.s.count =
+ (1600ull * clock_mhz) >> 10;
+ }
+ cvmx_write_csr(CVMX_PCSX_LINKX_TIMER_COUNT_REG(index, interface),
+ pcsx_linkx_timer_count_reg.u64);
+
+ /*
+ * Write the advertisement register to be used as the
+ * tx_Config_Reg<D15:D0> of the autonegotiation. In
+ * 1000BASE-X mode, tx_Config_Reg<D15:D0> is PCS*_AN*_ADV_REG.
+ * In SGMII PHY mode, tx_Config_Reg<D15:D0> is
+ * PCS*_SGM*_AN_ADV_REG. In SGMII MAC mode,
+ * tx_Config_Reg<D15:D0> is the fixed value 0x4001, so this
+ * step can be skipped.
+ */
+ if (pcs_misc_ctl_reg.s.mode) {
+ /* 1000BASE-X */
+ union cvmx_pcsx_anx_adv_reg pcsx_anx_adv_reg;
+ pcsx_anx_adv_reg.u64 =
+ cvmx_read_csr(CVMX_PCSX_ANX_ADV_REG(index, interface));
+ pcsx_anx_adv_reg.s.rem_flt = 0;
+ pcsx_anx_adv_reg.s.pause = 3;
+ pcsx_anx_adv_reg.s.hfd = 1;
+ pcsx_anx_adv_reg.s.fd = 1;
+ cvmx_write_csr(CVMX_PCSX_ANX_ADV_REG(index, interface),
+ pcsx_anx_adv_reg.u64);
+ } else {
+ union cvmx_pcsx_miscx_ctl_reg pcsx_miscx_ctl_reg;
+ pcsx_miscx_ctl_reg.u64 =
+ cvmx_read_csr(CVMX_PCSX_MISCX_CTL_REG(index, interface));
+ if (pcsx_miscx_ctl_reg.s.mac_phy) {
+ /* PHY Mode */
+ union cvmx_pcsx_sgmx_an_adv_reg pcsx_sgmx_an_adv_reg;
+ pcsx_sgmx_an_adv_reg.u64 =
+ cvmx_read_csr(CVMX_PCSX_SGMX_AN_ADV_REG
+ (index, interface));
+ pcsx_sgmx_an_adv_reg.s.link = 1;
+ pcsx_sgmx_an_adv_reg.s.dup = 1;
+ pcsx_sgmx_an_adv_reg.s.speed = 2;
+ cvmx_write_csr(CVMX_PCSX_SGMX_AN_ADV_REG
+ (index, interface),
+ pcsx_sgmx_an_adv_reg.u64);
+ } else {
+ /* MAC Mode - Nothing to do */
+ }
+ }
+ return 0;
+}
+
+/**
+ * Initialize the SERTES link for the first time or after a loss
+ * of link.
+ *
+ * @interface: Interface to init
+ * @index: Index of prot on the interface
+ *
+ * Returns Zero on success, negative on failure
+ */
+static int __cvmx_helper_sgmii_hardware_init_link(int interface, int index)
+{
+ union cvmx_pcsx_mrx_control_reg control_reg;
+
+ /*
+ * Take PCS through a reset sequence.
+ * PCS*_MR*_CONTROL_REG[PWR_DN] should be cleared to zero.
+ * Write PCS*_MR*_CONTROL_REG[RESET]=1 (while not changing the
+ * value of the other PCS*_MR*_CONTROL_REG bits). Read
+ * PCS*_MR*_CONTROL_REG[RESET] until it changes value to
+ * zero.
+ */
+ control_reg.u64 =
+ cvmx_read_csr(CVMX_PCSX_MRX_CONTROL_REG(index, interface));
+ if (cvmx_sysinfo_get()->board_type != CVMX_BOARD_TYPE_SIM) {
+ control_reg.s.reset = 1;
+ cvmx_write_csr(CVMX_PCSX_MRX_CONTROL_REG(index, interface),
+ control_reg.u64);
+ if (CVMX_WAIT_FOR_FIELD64
+ (CVMX_PCSX_MRX_CONTROL_REG(index, interface),
+ union cvmx_pcsx_mrx_control_reg, reset, ==, 0, 10000)) {
+ cvmx_dprintf("SGMII%d: Timeout waiting for port %d "
+ "to finish reset\n",
+ interface, index);
+ return -1;
+ }
+ }
+
+ /*
+ * Write PCS*_MR*_CONTROL_REG[RST_AN]=1 to ensure a fresh
+ * sgmii negotiation starts.
+ */
+ control_reg.s.rst_an = 1;
+ control_reg.s.an_en = 1;
+ control_reg.s.pwr_dn = 0;
+ cvmx_write_csr(CVMX_PCSX_MRX_CONTROL_REG(index, interface),
+ control_reg.u64);
+
+ /*
+ * Wait for PCS*_MR*_STATUS_REG[AN_CPT] to be set, indicating
+ * that sgmii autonegotiation is complete. In MAC mode this
+ * isn't an ethernet link, but a link between Octeon and the
+ * PHY.
+ */
+ if ((cvmx_sysinfo_get()->board_type != CVMX_BOARD_TYPE_SIM) &&
+ CVMX_WAIT_FOR_FIELD64(CVMX_PCSX_MRX_STATUS_REG(index, interface),
+ union cvmx_pcsx_mrx_status_reg, an_cpt, ==, 1,
+ 10000)) {
+ /* cvmx_dprintf("SGMII%d: Port %d link timeout\n", interface, index); */
+ return -1;
+ }
+ return 0;
+}
+
+/**
+ * Configure an SGMII link to the specified speed after the SERTES
+ * link is up.
+ *
+ * @interface: Interface to init
+ * @index: Index of prot on the interface
+ * @link_info: Link state to configure
+ *
+ * Returns Zero on success, negative on failure
+ */
+static int __cvmx_helper_sgmii_hardware_init_link_speed(int interface,
+ int index,
+ cvmx_helper_link_info_t
+ link_info)
+{
+ int is_enabled;
+ union cvmx_gmxx_prtx_cfg gmxx_prtx_cfg;
+ union cvmx_pcsx_miscx_ctl_reg pcsx_miscx_ctl_reg;
+
+ /* Disable GMX before we make any changes. Remember the enable state */
+ gmxx_prtx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface));
+ is_enabled = gmxx_prtx_cfg.s.en;
+ gmxx_prtx_cfg.s.en = 0;
+ cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), gmxx_prtx_cfg.u64);
+
+ /* Wait for GMX to be idle */
+ if (CVMX_WAIT_FOR_FIELD64
+ (CVMX_GMXX_PRTX_CFG(index, interface), union cvmx_gmxx_prtx_cfg,
+ rx_idle, ==, 1, 10000)
+ || CVMX_WAIT_FOR_FIELD64(CVMX_GMXX_PRTX_CFG(index, interface),
+ union cvmx_gmxx_prtx_cfg, tx_idle, ==, 1,
+ 10000)) {
+ cvmx_dprintf
+ ("SGMII%d: Timeout waiting for port %d to be idle\n",
+ interface, index);
+ return -1;
+ }
+
+ /* Read GMX CFG again to make sure the disable completed */
+ gmxx_prtx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface));
+
+ /*
+ * Get the misc control for PCS. We will need to set the
+ * duplication amount.
+ */
+ pcsx_miscx_ctl_reg.u64 =
+ cvmx_read_csr(CVMX_PCSX_MISCX_CTL_REG(index, interface));
+
+ /*
+ * Use GMXENO to force the link down if the status we get says
+ * it should be down.
+ */
+ pcsx_miscx_ctl_reg.s.gmxeno = !link_info.s.link_up;
+
+ /* Only change the duplex setting if the link is up */
+ if (link_info.s.link_up)
+ gmxx_prtx_cfg.s.duplex = link_info.s.full_duplex;
+
+ /* Do speed based setting for GMX */
+ switch (link_info.s.speed) {
+ case 10:
+ gmxx_prtx_cfg.s.speed = 0;
+ gmxx_prtx_cfg.s.speed_msb = 1;
+ gmxx_prtx_cfg.s.slottime = 0;
+ /* Setting from GMX-603 */
+ pcsx_miscx_ctl_reg.s.samp_pt = 25;
+ cvmx_write_csr(CVMX_GMXX_TXX_SLOT(index, interface), 64);
+ cvmx_write_csr(CVMX_GMXX_TXX_BURST(index, interface), 0);
+ break;
+ case 100:
+ gmxx_prtx_cfg.s.speed = 0;
+ gmxx_prtx_cfg.s.speed_msb = 0;
+ gmxx_prtx_cfg.s.slottime = 0;
+ pcsx_miscx_ctl_reg.s.samp_pt = 0x5;
+ cvmx_write_csr(CVMX_GMXX_TXX_SLOT(index, interface), 64);
+ cvmx_write_csr(CVMX_GMXX_TXX_BURST(index, interface), 0);
+ break;
+ case 1000:
+ gmxx_prtx_cfg.s.speed = 1;
+ gmxx_prtx_cfg.s.speed_msb = 0;
+ gmxx_prtx_cfg.s.slottime = 1;
+ pcsx_miscx_ctl_reg.s.samp_pt = 1;
+ cvmx_write_csr(CVMX_GMXX_TXX_SLOT(index, interface), 512);
+ cvmx_write_csr(CVMX_GMXX_TXX_BURST(index, interface), 8192);
+ break;
+ default:
+ break;
+ }
+
+ /* Write the new misc control for PCS */
+ cvmx_write_csr(CVMX_PCSX_MISCX_CTL_REG(index, interface),
+ pcsx_miscx_ctl_reg.u64);
+
+ /* Write the new GMX settings with the port still disabled */
+ cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), gmxx_prtx_cfg.u64);
+
+ /* Read GMX CFG again to make sure the config completed */
+ gmxx_prtx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface));
+
+ /* Restore the enabled / disabled state */
+ gmxx_prtx_cfg.s.en = is_enabled;
+ cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), gmxx_prtx_cfg.u64);
+
+ return 0;
+}
+
+/**
+ * Bring up the SGMII interface to be ready for packet I/O but
+ * leave I/O disabled using the GMX override. This function
+ * follows the bringup documented in 10.6.3 of the manual.
+ *
+ * @interface: Interface to bringup
+ * @num_ports: Number of ports on the interface
+ *
+ * Returns Zero on success, negative on failure
+ */
+static int __cvmx_helper_sgmii_hardware_init(int interface, int num_ports)
+{
+ int index;
+
+ __cvmx_helper_setup_gmx(interface, num_ports);
+
+ for (index = 0; index < num_ports; index++) {
+ int ipd_port = cvmx_helper_get_ipd_port(interface, index);
+ __cvmx_helper_sgmii_hardware_init_one_time(interface, index);
+ __cvmx_helper_sgmii_link_set(ipd_port,
+ __cvmx_helper_sgmii_link_get
+ (ipd_port));
+
+ }
+
+ return 0;
+}
+
+int __cvmx_helper_sgmii_enumerate(int interface)
+{
+ return 4;
+}
+/**
+ * Probe a SGMII interface and determine the number of ports
+ * connected to it. The SGMII interface should still be down after
+ * this call.
+ *
+ * @interface: Interface to probe
+ *
+ * Returns Number of ports on the interface. Zero to disable.
+ */
+int __cvmx_helper_sgmii_probe(int interface)
+{
+ union cvmx_gmxx_inf_mode mode;
+
+ /*
+ * Due to errata GMX-700 on CN56XXp1.x and CN52XXp1.x, the
+ * interface needs to be enabled before IPD otherwise per port
+ * backpressure may not work properly
+ */
+ mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface));
+ mode.s.en = 1;
+ cvmx_write_csr(CVMX_GMXX_INF_MODE(interface), mode.u64);
+ return __cvmx_helper_sgmii_enumerate(interface);
+}
+
+/**
+ * Bringup and enable a SGMII interface. After this call packet
+ * I/O should be fully functional. This is called with IPD
+ * enabled but PKO disabled.
+ *
+ * @interface: Interface to bring up
+ *
+ * Returns Zero on success, negative on failure
+ */
+int __cvmx_helper_sgmii_enable(int interface)
+{
+ int num_ports = cvmx_helper_ports_on_interface(interface);
+ int index;
+
+ __cvmx_helper_sgmii_hardware_init(interface, num_ports);
+
+ for (index = 0; index < num_ports; index++) {
+ union cvmx_gmxx_prtx_cfg gmxx_prtx_cfg;
+ gmxx_prtx_cfg.u64 =
+ cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface));
+ gmxx_prtx_cfg.s.en = 1;
+ cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface),
+ gmxx_prtx_cfg.u64);
+ __cvmx_interrupt_pcsx_intx_en_reg_enable(index, interface);
+ }
+ __cvmx_interrupt_pcsxx_int_en_reg_enable(interface);
+ __cvmx_interrupt_gmxx_enable(interface);
+ return 0;
+}
+
+/**
+ * Return the link state of an IPD/PKO port as returned by
+ * auto negotiation. The result of this function may not match
+ * Octeon's link config if auto negotiation has changed since
+ * the last call to cvmx_helper_link_set().
+ *
+ * @ipd_port: IPD/PKO port to query
+ *
+ * Returns Link state
+ */
+cvmx_helper_link_info_t __cvmx_helper_sgmii_link_get(int ipd_port)
+{
+ cvmx_helper_link_info_t result;
+ union cvmx_pcsx_miscx_ctl_reg pcs_misc_ctl_reg;
+ int interface = cvmx_helper_get_interface_num(ipd_port);
+ int index = cvmx_helper_get_interface_index_num(ipd_port);
+ union cvmx_pcsx_mrx_control_reg pcsx_mrx_control_reg;
+
+ result.u64 = 0;
+
+ if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_SIM) {
+ /* The simulator gives you a simulated 1Gbps full duplex link */
+ result.s.link_up = 1;
+ result.s.full_duplex = 1;
+ result.s.speed = 1000;
+ return result;
+ }
+
+ pcsx_mrx_control_reg.u64 =
+ cvmx_read_csr(CVMX_PCSX_MRX_CONTROL_REG(index, interface));
+ if (pcsx_mrx_control_reg.s.loopbck1) {
+ /* Force 1Gbps full duplex link for internal loopback */
+ result.s.link_up = 1;
+ result.s.full_duplex = 1;
+ result.s.speed = 1000;
+ return result;
+ }
+
+ pcs_misc_ctl_reg.u64 =
+ cvmx_read_csr(CVMX_PCSX_MISCX_CTL_REG(index, interface));
+ if (pcs_misc_ctl_reg.s.mode) {
+ /* 1000BASE-X */
+ /* FIXME */
+ } else {
+ union cvmx_pcsx_miscx_ctl_reg pcsx_miscx_ctl_reg;
+ pcsx_miscx_ctl_reg.u64 =
+ cvmx_read_csr(CVMX_PCSX_MISCX_CTL_REG(index, interface));
+ if (pcsx_miscx_ctl_reg.s.mac_phy) {
+ /* PHY Mode */
+ union cvmx_pcsx_mrx_status_reg pcsx_mrx_status_reg;
+ union cvmx_pcsx_anx_results_reg pcsx_anx_results_reg;
+
+ /*
+ * Don't bother continuing if the SERTES low
+ * level link is down
+ */
+ pcsx_mrx_status_reg.u64 =
+ cvmx_read_csr(CVMX_PCSX_MRX_STATUS_REG
+ (index, interface));
+ if (pcsx_mrx_status_reg.s.lnk_st == 0) {
+ if (__cvmx_helper_sgmii_hardware_init_link
+ (interface, index) != 0)
+ return result;
+ }
+
+ /* Read the autoneg results */
+ pcsx_anx_results_reg.u64 =
+ cvmx_read_csr(CVMX_PCSX_ANX_RESULTS_REG
+ (index, interface));
+ if (pcsx_anx_results_reg.s.an_cpt) {
+ /*
+ * Auto negotiation is complete. Set
+ * status accordingly.
+ */
+ result.s.full_duplex =
+ pcsx_anx_results_reg.s.dup;
+ result.s.link_up =
+ pcsx_anx_results_reg.s.link_ok;
+ switch (pcsx_anx_results_reg.s.spd) {
+ case 0:
+ result.s.speed = 10;
+ break;
+ case 1:
+ result.s.speed = 100;
+ break;
+ case 2:
+ result.s.speed = 1000;
+ break;
+ default:
+ result.s.speed = 0;
+ result.s.link_up = 0;
+ break;
+ }
+ } else {
+ /*
+ * Auto negotiation isn't
+ * complete. Return link down.
+ */
+ result.s.speed = 0;
+ result.s.link_up = 0;
+ }
+ } else { /* MAC Mode */
+
+ result = __cvmx_helper_board_link_get(ipd_port);
+ }
+ }
+ return result;
+}
+
+/**
+ * Configure an IPD/PKO port for the specified link state. This
+ * function does not influence auto negotiation at the PHY level.
+ * The passed link state must always match the link state returned
+ * by cvmx_helper_link_get(). It is normally best to use
+ * cvmx_helper_link_autoconf() instead.
+ *
+ * @ipd_port: IPD/PKO port to configure
+ * @link_info: The new link state
+ *
+ * Returns Zero on success, negative on failure
+ */
+int __cvmx_helper_sgmii_link_set(int ipd_port,
+ cvmx_helper_link_info_t link_info)
+{
+ int interface = cvmx_helper_get_interface_num(ipd_port);
+ int index = cvmx_helper_get_interface_index_num(ipd_port);
+ __cvmx_helper_sgmii_hardware_init_link(interface, index);
+ return __cvmx_helper_sgmii_hardware_init_link_speed(interface, index,
+ link_info);
+}
+
+/**
+ * Configure a port for internal and/or external loopback. Internal
+ * loopback causes packets sent by the port to be received by
+ * Octeon. External loopback causes packets received from the wire to
+ * sent out again.
+ *
+ * @ipd_port: IPD/PKO port to loopback.
+ * @enable_internal:
+ * Non zero if you want internal loopback
+ * @enable_external:
+ * Non zero if you want external loopback
+ *
+ * Returns Zero on success, negative on failure.
+ */
+int __cvmx_helper_sgmii_configure_loopback(int ipd_port, int enable_internal,
+ int enable_external)
+{
+ int interface = cvmx_helper_get_interface_num(ipd_port);
+ int index = cvmx_helper_get_interface_index_num(ipd_port);
+ union cvmx_pcsx_mrx_control_reg pcsx_mrx_control_reg;
+ union cvmx_pcsx_miscx_ctl_reg pcsx_miscx_ctl_reg;
+
+ pcsx_mrx_control_reg.u64 =
+ cvmx_read_csr(CVMX_PCSX_MRX_CONTROL_REG(index, interface));
+ pcsx_mrx_control_reg.s.loopbck1 = enable_internal;
+ cvmx_write_csr(CVMX_PCSX_MRX_CONTROL_REG(index, interface),
+ pcsx_mrx_control_reg.u64);
+
+ pcsx_miscx_ctl_reg.u64 =
+ cvmx_read_csr(CVMX_PCSX_MISCX_CTL_REG(index, interface));
+ pcsx_miscx_ctl_reg.s.loopbck2 = enable_external;
+ cvmx_write_csr(CVMX_PCSX_MISCX_CTL_REG(index, interface),
+ pcsx_miscx_ctl_reg.u64);
+
+ __cvmx_helper_sgmii_hardware_init_link(interface, index);
+ return 0;
+}