diff options
Diffstat (limited to 'arch')
1077 files changed, 32393 insertions, 8619 deletions
diff --git a/arch/Kconfig b/arch/Kconfig index 5dbf11a5ba4e..266862428a84 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -355,6 +355,12 @@ config HAVE_RSEQ This symbol should be selected by an architecture if it supports an implementation of restartable sequences. +config HAVE_RUST + bool + help + This symbol should be selected by an architecture if it + supports Rust. + config HAVE_FUNCTION_ARG_ACCESS_API bool help @@ -738,11 +744,13 @@ config ARCH_SUPPORTS_CFI_CLANG An architecture should select this option if it can support Clang's Control-Flow Integrity (CFI) checking. +config ARCH_USES_CFI_TRAPS + bool + config CFI_CLANG bool "Use Clang's Control Flow Integrity (CFI)" - depends on LTO_CLANG && ARCH_SUPPORTS_CFI_CLANG - depends on CLANG_VERSION >= 140000 - select KALLSYMS + depends on ARCH_SUPPORTS_CFI_CLANG + depends on $(cc-option,-fsanitize=kcfi) help This option enables Clang’s forward-edge Control Flow Integrity (CFI) checking, where the compiler injects a runtime check to each @@ -754,16 +762,6 @@ config CFI_CLANG https://clang.llvm.org/docs/ControlFlowIntegrity.html -config CFI_CLANG_SHADOW - bool "Use CFI shadow to speed up cross-module checks" - default y - depends on CFI_CLANG && MODULES - help - If you select this option, the kernel builds a fast look-up table of - CFI check functions in loaded modules to reduce performance overhead. - - If unsure, say Y. - config CFI_PERMISSIVE bool "Use CFI in permissive mode" depends on CFI_CLANG @@ -923,6 +921,9 @@ config HAVE_SOFTIRQ_ON_OWN_STACK Architecture provides a function to run __do_softirq() on a separate stack. +config SOFTIRQ_ON_OWN_STACK + def_bool HAVE_SOFTIRQ_ON_OWN_STACK && !PREEMPT_RT + config ALTERNATE_USER_ADDRESS_SPACE bool help diff --git a/arch/alpha/include/asm/a.out.h b/arch/alpha/include/asm/a.out.h deleted file mode 100644 index d2346b7caff1..000000000000 --- a/arch/alpha/include/asm/a.out.h +++ /dev/null @@ -1,16 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ALPHA_A_OUT_H__ -#define __ALPHA_A_OUT_H__ - -#include <uapi/asm/a.out.h> - - -/* Assume that start addresses below 4G belong to a TASO application. - Unfortunately, there is no proper bit in the exec header to check. - Worse, we have to notice the start address before swapping to use - /sbin/loader, which of course is _not_ a TASO application. */ -#define SET_AOUT_PERSONALITY(BFPM, EX) \ - set_personality (((BFPM->taso || EX.ah.entry < 0x100000000L \ - ? ADDR_LIMIT_32BIT : 0) | PER_OSF4)) - -#endif /* __A_OUT_GNU_H__ */ diff --git a/arch/alpha/include/asm/core_apecs.h b/arch/alpha/include/asm/core_apecs.h index 2d9726fc02ef..69a2fc62c9c3 100644 --- a/arch/alpha/include/asm/core_apecs.h +++ b/arch/alpha/include/asm/core_apecs.h @@ -384,7 +384,7 @@ struct el_apecs_procdata } \ } while (0) -__EXTERN_INLINE unsigned int apecs_ioread8(const void __iomem *xaddr) +__EXTERN_INLINE u8 apecs_ioread8(const void __iomem *xaddr) { unsigned long addr = (unsigned long) xaddr; unsigned long result, base_and_type; @@ -420,7 +420,7 @@ __EXTERN_INLINE void apecs_iowrite8(u8 b, void __iomem *xaddr) *(vuip) ((addr << 5) + base_and_type) = w; } -__EXTERN_INLINE unsigned int apecs_ioread16(const void __iomem *xaddr) +__EXTERN_INLINE u16 apecs_ioread16(const void __iomem *xaddr) { unsigned long addr = (unsigned long) xaddr; unsigned long result, base_and_type; @@ -456,7 +456,7 @@ __EXTERN_INLINE void apecs_iowrite16(u16 b, void __iomem *xaddr) *(vuip) ((addr << 5) + base_and_type) = w; } -__EXTERN_INLINE unsigned int apecs_ioread32(const void __iomem *xaddr) +__EXTERN_INLINE u32 apecs_ioread32(const void __iomem *xaddr) { unsigned long addr = (unsigned long) xaddr; if (addr < APECS_DENSE_MEM) @@ -472,6 +472,22 @@ __EXTERN_INLINE void apecs_iowrite32(u32 b, void __iomem *xaddr) *(vuip)addr = b; } +__EXTERN_INLINE u64 apecs_ioread64(const void __iomem *xaddr) +{ + unsigned long addr = (unsigned long) xaddr; + if (addr < APECS_DENSE_MEM) + addr = ((addr - APECS_IO) << 5) + APECS_IO + 0x18; + return *(vulp)addr; +} + +__EXTERN_INLINE void apecs_iowrite64(u64 b, void __iomem *xaddr) +{ + unsigned long addr = (unsigned long) xaddr; + if (addr < APECS_DENSE_MEM) + addr = ((addr - APECS_IO) << 5) + APECS_IO + 0x18; + *(vulp)addr = b; +} + __EXTERN_INLINE void __iomem *apecs_ioportmap(unsigned long addr) { return (void __iomem *)(addr + APECS_IO); diff --git a/arch/alpha/include/asm/core_cia.h b/arch/alpha/include/asm/core_cia.h index cb22991f6761..d26bdfb7ca3b 100644 --- a/arch/alpha/include/asm/core_cia.h +++ b/arch/alpha/include/asm/core_cia.h @@ -342,7 +342,7 @@ struct el_CIA_sysdata_mcheck { #define vuip volatile unsigned int __force * #define vulp volatile unsigned long __force * -__EXTERN_INLINE unsigned int cia_ioread8(const void __iomem *xaddr) +__EXTERN_INLINE u8 cia_ioread8(const void __iomem *xaddr) { unsigned long addr = (unsigned long) xaddr; unsigned long result, base_and_type; @@ -374,7 +374,7 @@ __EXTERN_INLINE void cia_iowrite8(u8 b, void __iomem *xaddr) *(vuip) ((addr << 5) + base_and_type) = w; } -__EXTERN_INLINE unsigned int cia_ioread16(const void __iomem *xaddr) +__EXTERN_INLINE u16 cia_ioread16(const void __iomem *xaddr) { unsigned long addr = (unsigned long) xaddr; unsigned long result, base_and_type; @@ -404,7 +404,7 @@ __EXTERN_INLINE void cia_iowrite16(u16 b, void __iomem *xaddr) *(vuip) ((addr << 5) + base_and_type) = w; } -__EXTERN_INLINE unsigned int cia_ioread32(const void __iomem *xaddr) +__EXTERN_INLINE u32 cia_ioread32(const void __iomem *xaddr) { unsigned long addr = (unsigned long) xaddr; if (addr < CIA_DENSE_MEM) @@ -420,6 +420,22 @@ __EXTERN_INLINE void cia_iowrite32(u32 b, void __iomem *xaddr) *(vuip)addr = b; } +__EXTERN_INLINE u64 cia_ioread64(const void __iomem *xaddr) +{ + unsigned long addr = (unsigned long) xaddr; + if (addr < CIA_DENSE_MEM) + addr = ((addr - CIA_IO) << 5) + CIA_IO + 0x18; + return *(vulp)addr; +} + +__EXTERN_INLINE void cia_iowrite64(u64 b, void __iomem *xaddr) +{ + unsigned long addr = (unsigned long) xaddr; + if (addr < CIA_DENSE_MEM) + addr = ((addr - CIA_IO) << 5) + CIA_IO + 0x18; + *(vulp)addr = b; +} + __EXTERN_INLINE void __iomem *cia_ioportmap(unsigned long addr) { return (void __iomem *)(addr + CIA_IO); diff --git a/arch/alpha/include/asm/core_lca.h b/arch/alpha/include/asm/core_lca.h index ec86314418cb..d8c3e72ef8f6 100644 --- a/arch/alpha/include/asm/core_lca.h +++ b/arch/alpha/include/asm/core_lca.h @@ -230,7 +230,7 @@ union el_lca { } while (0) -__EXTERN_INLINE unsigned int lca_ioread8(const void __iomem *xaddr) +__EXTERN_INLINE u8 lca_ioread8(const void __iomem *xaddr) { unsigned long addr = (unsigned long) xaddr; unsigned long result, base_and_type; @@ -266,7 +266,7 @@ __EXTERN_INLINE void lca_iowrite8(u8 b, void __iomem *xaddr) *(vuip) ((addr << 5) + base_and_type) = w; } -__EXTERN_INLINE unsigned int lca_ioread16(const void __iomem *xaddr) +__EXTERN_INLINE u16 lca_ioread16(const void __iomem *xaddr) { unsigned long addr = (unsigned long) xaddr; unsigned long result, base_and_type; @@ -302,7 +302,7 @@ __EXTERN_INLINE void lca_iowrite16(u16 b, void __iomem *xaddr) *(vuip) ((addr << 5) + base_and_type) = w; } -__EXTERN_INLINE unsigned int lca_ioread32(const void __iomem *xaddr) +__EXTERN_INLINE u32 lca_ioread32(const void __iomem *xaddr) { unsigned long addr = (unsigned long) xaddr; if (addr < LCA_DENSE_MEM) @@ -318,6 +318,22 @@ __EXTERN_INLINE void lca_iowrite32(u32 b, void __iomem *xaddr) *(vuip)addr = b; } +__EXTERN_INLINE u64 lca_ioread64(const void __iomem *xaddr) +{ + unsigned long addr = (unsigned long) xaddr; + if (addr < LCA_DENSE_MEM) + addr = ((addr - LCA_IO) << 5) + LCA_IO + 0x18; + return *(vulp)addr; +} + +__EXTERN_INLINE void lca_iowrite64(u64 b, void __iomem *xaddr) +{ + unsigned long addr = (unsigned long) xaddr; + if (addr < LCA_DENSE_MEM) + addr = ((addr - LCA_IO) << 5) + LCA_IO + 0x18; + *(vulp)addr = b; +} + __EXTERN_INLINE void __iomem *lca_ioportmap(unsigned long addr) { return (void __iomem *)(addr + LCA_IO); diff --git a/arch/alpha/include/asm/core_marvel.h b/arch/alpha/include/asm/core_marvel.h index b266e02e284b..d99f3a82e0e5 100644 --- a/arch/alpha/include/asm/core_marvel.h +++ b/arch/alpha/include/asm/core_marvel.h @@ -332,10 +332,10 @@ struct io7 { #define vucp volatile unsigned char __force * #define vusp volatile unsigned short __force * -extern unsigned int marvel_ioread8(const void __iomem *); +extern u8 marvel_ioread8(const void __iomem *); extern void marvel_iowrite8(u8 b, void __iomem *); -__EXTERN_INLINE unsigned int marvel_ioread16(const void __iomem *addr) +__EXTERN_INLINE u16 marvel_ioread16(const void __iomem *addr) { return __kernel_ldwu(*(vusp)addr); } diff --git a/arch/alpha/include/asm/core_mcpcia.h b/arch/alpha/include/asm/core_mcpcia.h index cb24d1bd6141..ed2bf8ad40ed 100644 --- a/arch/alpha/include/asm/core_mcpcia.h +++ b/arch/alpha/include/asm/core_mcpcia.h @@ -248,6 +248,7 @@ struct el_MCPCIA_uncorrected_frame_mcheck { #define vip volatile int __force * #define vuip volatile unsigned int __force * +#define vulp volatile unsigned long __force * #ifndef MCPCIA_ONE_HAE_WINDOW #define MCPCIA_FROB_MMIO \ @@ -267,7 +268,7 @@ extern inline int __mcpcia_is_mmio(unsigned long addr) return (addr & 0x80000000UL) == 0; } -__EXTERN_INLINE unsigned int mcpcia_ioread8(const void __iomem *xaddr) +__EXTERN_INLINE u8 mcpcia_ioread8(const void __iomem *xaddr) { unsigned long addr = (unsigned long)xaddr & MCPCIA_MEM_MASK; unsigned long hose = (unsigned long)xaddr & ~MCPCIA_MEM_MASK; @@ -291,7 +292,7 @@ __EXTERN_INLINE void mcpcia_iowrite8(u8 b, void __iomem *xaddr) *(vuip) ((addr << 5) + hose + 0x00) = w; } -__EXTERN_INLINE unsigned int mcpcia_ioread16(const void __iomem *xaddr) +__EXTERN_INLINE u16 mcpcia_ioread16(const void __iomem *xaddr) { unsigned long addr = (unsigned long)xaddr & MCPCIA_MEM_MASK; unsigned long hose = (unsigned long)xaddr & ~MCPCIA_MEM_MASK; @@ -315,7 +316,7 @@ __EXTERN_INLINE void mcpcia_iowrite16(u16 b, void __iomem *xaddr) *(vuip) ((addr << 5) + hose + 0x08) = w; } -__EXTERN_INLINE unsigned int mcpcia_ioread32(const void __iomem *xaddr) +__EXTERN_INLINE u32 mcpcia_ioread32(const void __iomem *xaddr) { unsigned long addr = (unsigned long)xaddr; @@ -335,6 +336,26 @@ __EXTERN_INLINE void mcpcia_iowrite32(u32 b, void __iomem *xaddr) *(vuip)addr = b; } +__EXTERN_INLINE u64 mcpcia_ioread64(const void __iomem *xaddr) +{ + unsigned long addr = (unsigned long)xaddr; + + if (!__mcpcia_is_mmio(addr)) + addr = ((addr & 0xffff) << 5) + (addr & ~0xfffful) + 0x18; + + return *(vulp)addr; +} + +__EXTERN_INLINE void mcpcia_iowrite64(u64 b, void __iomem *xaddr) +{ + unsigned long addr = (unsigned long)xaddr; + + if (!__mcpcia_is_mmio(addr)) + addr = ((addr & 0xffff) << 5) + (addr & ~0xfffful) + 0x18; + + *(vulp)addr = b; +} + __EXTERN_INLINE void __iomem *mcpcia_ioportmap(unsigned long addr) { @@ -362,6 +383,7 @@ __EXTERN_INLINE int mcpcia_is_mmio(const volatile void __iomem *xaddr) #undef vip #undef vuip +#undef vulp #undef __IO_PREFIX #define __IO_PREFIX mcpcia diff --git a/arch/alpha/include/asm/core_t2.h b/arch/alpha/include/asm/core_t2.h index 12bb7addc789..ab956b1625b5 100644 --- a/arch/alpha/include/asm/core_t2.h +++ b/arch/alpha/include/asm/core_t2.h @@ -360,6 +360,7 @@ struct el_t2_frame_corrected { #define vip volatile int * #define vuip volatile unsigned int * +#define vulp volatile unsigned long * extern inline u8 t2_inb(unsigned long addr) { @@ -402,6 +403,17 @@ extern inline void t2_outl(u32 b, unsigned long addr) mb(); } +extern inline u64 t2_inq(unsigned long addr) +{ + return *(vulp) ((addr << 5) + T2_IO + 0x18); +} + +extern inline void t2_outq(u64 b, unsigned long addr) +{ + *(vulp) ((addr << 5) + T2_IO + 0x18) = b; + mb(); +} + /* * Memory functions. @@ -572,7 +584,7 @@ __EXTERN_INLINE int t2_is_mmio(const volatile void __iomem *addr) it doesn't make sense to merge the pio and mmio routines. */ #define IOPORT(OS, NS) \ -__EXTERN_INLINE unsigned int t2_ioread##NS(const void __iomem *xaddr) \ +__EXTERN_INLINE u##NS t2_ioread##NS(const void __iomem *xaddr) \ { \ if (t2_is_mmio(xaddr)) \ return t2_read##OS(xaddr); \ @@ -590,11 +602,13 @@ __EXTERN_INLINE void t2_iowrite##NS(u##NS b, void __iomem *xaddr) \ IOPORT(b, 8) IOPORT(w, 16) IOPORT(l, 32) +IOPORT(q, 64) #undef IOPORT #undef vip #undef vuip +#undef vulp #undef __IO_PREFIX #define __IO_PREFIX t2 diff --git a/arch/alpha/include/asm/io.h b/arch/alpha/include/asm/io.h index d277189b2677..1c3605d874e9 100644 --- a/arch/alpha/include/asm/io.h +++ b/arch/alpha/include/asm/io.h @@ -90,6 +90,8 @@ static inline void * phys_to_virt(unsigned long address) } #endif +#define virt_to_phys virt_to_phys +#define phys_to_virt phys_to_virt #define page_to_phys(page) page_to_pa(page) /* Maximum PIO space address supported? */ @@ -153,6 +155,7 @@ static inline void generic_##NAME(TYPE b, QUAL void __iomem *addr) \ REMAP1(unsigned int, ioread8, const) REMAP1(unsigned int, ioread16, const) REMAP1(unsigned int, ioread32, const) +REMAP1(u64, ioread64, const) REMAP1(u8, readb, const volatile) REMAP1(u16, readw, const volatile) REMAP1(u32, readl, const volatile) @@ -161,6 +164,7 @@ REMAP1(u64, readq, const volatile) REMAP2(u8, iowrite8, /**/) REMAP2(u16, iowrite16, /**/) REMAP2(u32, iowrite32, /**/) +REMAP2(u64, iowrite64, /**/) REMAP2(u8, writeb, volatile) REMAP2(u16, writew, volatile) REMAP2(u32, writel, volatile) @@ -242,6 +246,12 @@ extern u32 inl(unsigned long port); extern void outb(u8 b, unsigned long port); extern void outw(u16 b, unsigned long port); extern void outl(u32 b, unsigned long port); +#define inb inb +#define inw inw +#define inl inl +#define outb outb +#define outw outw +#define outl outl extern u8 readb(const volatile void __iomem *addr); extern u16 readw(const volatile void __iomem *addr); @@ -251,6 +261,14 @@ extern void writeb(u8 b, volatile void __iomem *addr); extern void writew(u16 b, volatile void __iomem *addr); extern void writel(u32 b, volatile void __iomem *addr); extern void writeq(u64 b, volatile void __iomem *addr); +#define readb readb +#define readw readw +#define readl readl +#define readq readq +#define writeb writeb +#define writew writew +#define writel writel +#define writeq writeq extern u8 __raw_readb(const volatile void __iomem *addr); extern u16 __raw_readw(const volatile void __iomem *addr); @@ -260,6 +278,14 @@ extern void __raw_writeb(u8 b, volatile void __iomem *addr); extern void __raw_writew(u16 b, volatile void __iomem *addr); extern void __raw_writel(u32 b, volatile void __iomem *addr); extern void __raw_writeq(u64 b, volatile void __iomem *addr); +#define __raw_readb __raw_readb +#define __raw_readw __raw_readw +#define __raw_readl __raw_readl +#define __raw_readq __raw_readq +#define __raw_writeb __raw_writeb +#define __raw_writew __raw_writew +#define __raw_writel __raw_writel +#define __raw_writeq __raw_writeq /* * Mapping from port numbers to __iomem space is pretty easy. @@ -277,6 +303,9 @@ extern inline void ioport_unmap(void __iomem *addr) { } +#define ioport_map ioport_map +#define ioport_unmap ioport_unmap + static inline void __iomem *ioremap(unsigned long port, unsigned long size) { return IO_CONCAT(__IO_PREFIX,ioremap) (port, size); @@ -358,6 +387,11 @@ extern inline void outw(u16 b, unsigned long port) } #endif +#define ioread8 ioread8 +#define ioread16 ioread16 +#define iowrite8 iowrite8 +#define iowrite16 iowrite16 + #if IO_CONCAT(__IO_PREFIX,trivial_io_lq) extern inline unsigned int ioread32(const void __iomem *addr) { @@ -368,12 +402,27 @@ extern inline unsigned int ioread32(const void __iomem *addr) return ret; } +extern inline u64 ioread64(const void __iomem *addr) +{ + unsigned int ret; + mb(); + ret = IO_CONCAT(__IO_PREFIX,ioread64)(addr); + mb(); + return ret; +} + extern inline void iowrite32(u32 b, void __iomem *addr) { mb(); IO_CONCAT(__IO_PREFIX, iowrite32)(b, addr); } +extern inline void iowrite64(u64 b, void __iomem *addr) +{ + mb(); + IO_CONCAT(__IO_PREFIX, iowrite64)(b, addr); +} + extern inline u32 inl(unsigned long port) { return ioread32(ioport_map(port, 4)); @@ -385,6 +434,11 @@ extern inline void outl(u32 b, unsigned long port) } #endif +#define ioread32 ioread32 +#define ioread64 ioread64 +#define iowrite32 iowrite32 +#define iowrite64 iowrite64 + #if IO_CONCAT(__IO_PREFIX,trivial_rw_bw) == 1 extern inline u8 __raw_readb(const volatile void __iomem *addr) { @@ -505,6 +559,10 @@ extern u8 readb_relaxed(const volatile void __iomem *addr); extern u16 readw_relaxed(const volatile void __iomem *addr); extern u32 readl_relaxed(const volatile void __iomem *addr); extern u64 readq_relaxed(const volatile void __iomem *addr); +#define readb_relaxed readb_relaxed +#define readw_relaxed readw_relaxed +#define readl_relaxed readl_relaxed +#define readq_relaxed readq_relaxed #if IO_CONCAT(__IO_PREFIX,trivial_io_bw) extern inline u8 readb_relaxed(const volatile void __iomem *addr) @@ -557,6 +615,10 @@ static inline void memsetw_io(volatile void __iomem *addr, u16 c, long len) _memset_c_io(addr, 0x0001000100010001UL * c, len); } +#define memset_io memset_io +#define memcpy_fromio memcpy_fromio +#define memcpy_toio memcpy_toio + /* * String versions of in/out ops: */ @@ -567,6 +629,13 @@ extern void outsb (unsigned long port, const void *src, unsigned long count); extern void outsw (unsigned long port, const void *src, unsigned long count); extern void outsl (unsigned long port, const void *src, unsigned long count); +#define insb insb +#define insw insw +#define insl insl +#define outsb outsb +#define outsw outsw +#define outsl outsl + /* * The Alpha Jensen hardware for some rather strange reason puts * the RTC clock at 0x170 instead of 0x70. Probably due to some @@ -587,21 +656,29 @@ extern void outsl (unsigned long port, const void *src, unsigned long count); #define RTC_ALWAYS_BCD 0 /* - * Some mucking forons use if[n]def writeq to check if platform has it. - * It's a bloody bad idea and we probably want ARCH_HAS_WRITEQ for them - * to play with; for now just use cpp anti-recursion logics and make sure - * that damn thing is defined and expands to itself. - */ - -#define writeq writeq -#define readq readq - -/* * Convert a physical pointer to a virtual kernel pointer for /dev/mem * access */ #define xlate_dev_mem_ptr(p) __va(p) +/* + * These get provided from <asm-generic/iomap.h> since alpha does not + * select GENERIC_IOMAP. + */ +#define ioread64 ioread64 +#define iowrite64 iowrite64 +#define ioread64be ioread64be +#define iowrite64be iowrite64be +#define ioread8_rep ioread8_rep +#define ioread16_rep ioread16_rep +#define ioread32_rep ioread32_rep +#define iowrite8_rep iowrite8_rep +#define iowrite16_rep iowrite16_rep +#define iowrite32_rep iowrite32_rep +#define pci_iounmap pci_iounmap + +#include <asm-generic/io.h> + #endif /* __KERNEL__ */ #endif /* __ALPHA_IO_H */ diff --git a/arch/alpha/include/asm/io_trivial.h b/arch/alpha/include/asm/io_trivial.h index a1a29cbe02fa..00032093bcfc 100644 --- a/arch/alpha/include/asm/io_trivial.h +++ b/arch/alpha/include/asm/io_trivial.h @@ -6,13 +6,13 @@ /* This file may be included multiple times. */ #if IO_CONCAT(__IO_PREFIX,trivial_io_bw) -__EXTERN_INLINE unsigned int +__EXTERN_INLINE u8 IO_CONCAT(__IO_PREFIX,ioread8)(const void __iomem *a) { return __kernel_ldbu(*(const volatile u8 __force *)a); } -__EXTERN_INLINE unsigned int +__EXTERN_INLINE u16 IO_CONCAT(__IO_PREFIX,ioread16)(const void __iomem *a) { return __kernel_ldwu(*(const volatile u16 __force *)a); @@ -32,7 +32,7 @@ IO_CONCAT(__IO_PREFIX,iowrite16)(u16 b, void __iomem *a) #endif #if IO_CONCAT(__IO_PREFIX,trivial_io_lq) -__EXTERN_INLINE unsigned int +__EXTERN_INLINE u32 IO_CONCAT(__IO_PREFIX,ioread32)(const void __iomem *a) { return *(const volatile u32 __force *)a; @@ -43,6 +43,18 @@ IO_CONCAT(__IO_PREFIX,iowrite32)(u32 b, void __iomem *a) { *(volatile u32 __force *)a = b; } + +__EXTERN_INLINE u64 +IO_CONCAT(__IO_PREFIX,ioread64)(const void __iomem *a) +{ + return *(const volatile u64 __force *)a; +} + +__EXTERN_INLINE void +IO_CONCAT(__IO_PREFIX,iowrite64)(u64 b, void __iomem *a) +{ + *(volatile u64 __force *)a = b; +} #endif #if IO_CONCAT(__IO_PREFIX,trivial_rw_bw) == 1 diff --git a/arch/alpha/include/asm/jensen.h b/arch/alpha/include/asm/jensen.h index 1c4131453db2..66eb049eb421 100644 --- a/arch/alpha/include/asm/jensen.h +++ b/arch/alpha/include/asm/jensen.h @@ -98,6 +98,7 @@ __EXTERN_INLINE void jensen_set_hae(unsigned long addr) } #define vuip volatile unsigned int * +#define vulp volatile unsigned long * /* * IO functions @@ -183,6 +184,12 @@ __EXTERN_INLINE u32 jensen_inl(unsigned long addr) return *(vuip) ((addr << 7) + EISA_IO + 0x60); } +__EXTERN_INLINE u64 jensen_inq(unsigned long addr) +{ + jensen_set_hae(0); + return *(vulp) ((addr << 7) + EISA_IO + 0x60); +} + __EXTERN_INLINE void jensen_outw(u16 b, unsigned long addr) { jensen_set_hae(0); @@ -197,6 +204,13 @@ __EXTERN_INLINE void jensen_outl(u32 b, unsigned long addr) mb(); } +__EXTERN_INLINE void jensen_outq(u64 b, unsigned long addr) +{ + jensen_set_hae(0); + *(vulp) ((addr << 7) + EISA_IO + 0x60) = b; + mb(); +} + /* * Memory functions. */ @@ -305,7 +319,7 @@ __EXTERN_INLINE int jensen_is_mmio(const volatile void __iomem *addr) that it doesn't make sense to merge them. */ #define IOPORT(OS, NS) \ -__EXTERN_INLINE unsigned int jensen_ioread##NS(const void __iomem *xaddr) \ +__EXTERN_INLINE u##NS jensen_ioread##NS(const void __iomem *xaddr) \ { \ if (jensen_is_mmio(xaddr)) \ return jensen_read##OS(xaddr - 0x100000000ul); \ @@ -323,10 +337,12 @@ __EXTERN_INLINE void jensen_iowrite##NS(u##NS b, void __iomem *xaddr) \ IOPORT(b, 8) IOPORT(w, 16) IOPORT(l, 32) +IOPORT(q, 64) #undef IOPORT #undef vuip +#undef vulp #undef __IO_PREFIX #define __IO_PREFIX jensen diff --git a/arch/alpha/include/asm/machvec.h b/arch/alpha/include/asm/machvec.h index e49fabce7b33..8623f995d34c 100644 --- a/arch/alpha/include/asm/machvec.h +++ b/arch/alpha/include/asm/machvec.h @@ -46,13 +46,15 @@ struct alpha_machine_vector void (*mv_pci_tbi)(struct pci_controller *hose, dma_addr_t start, dma_addr_t end); - unsigned int (*mv_ioread8)(const void __iomem *); - unsigned int (*mv_ioread16)(const void __iomem *); - unsigned int (*mv_ioread32)(const void __iomem *); + u8 (*mv_ioread8)(const void __iomem *); + u16 (*mv_ioread16)(const void __iomem *); + u32 (*mv_ioread32)(const void __iomem *); + u64 (*mv_ioread64)(const void __iomem *); void (*mv_iowrite8)(u8, void __iomem *); void (*mv_iowrite16)(u16, void __iomem *); void (*mv_iowrite32)(u32, void __iomem *); + void (*mv_iowrite64)(u64, void __iomem *); u8 (*mv_readb)(const volatile void __iomem *); u16 (*mv_readw)(const volatile void __iomem *); diff --git a/arch/alpha/include/asm/termios.h b/arch/alpha/include/asm/termios.h deleted file mode 100644 index b7c77bb1bfd2..000000000000 --- a/arch/alpha/include/asm/termios.h +++ /dev/null @@ -1,87 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _ALPHA_TERMIOS_H -#define _ALPHA_TERMIOS_H - -#include <uapi/asm/termios.h> - -/* eof=^D eol=\0 eol2=\0 erase=del - werase=^W kill=^U reprint=^R sxtc=\0 - intr=^C quit=^\ susp=^Z <OSF/1 VDSUSP> - start=^Q stop=^S lnext=^V discard=^U - vmin=\1 vtime=\0 -*/ -#define INIT_C_CC "\004\000\000\177\027\025\022\000\003\034\032\000\021\023\026\025\001\000" - -/* - * Translate a "termio" structure into a "termios". Ugh. - */ - -#define user_termio_to_kernel_termios(a_termios, u_termio) \ -({ \ - struct ktermios *k_termios = (a_termios); \ - struct termio k_termio; \ - int canon, ret; \ - \ - ret = copy_from_user(&k_termio, u_termio, sizeof(k_termio)); \ - if (!ret) { \ - /* Overwrite only the low bits. */ \ - *(unsigned short *)&k_termios->c_iflag = k_termio.c_iflag; \ - *(unsigned short *)&k_termios->c_oflag = k_termio.c_oflag; \ - *(unsigned short *)&k_termios->c_cflag = k_termio.c_cflag; \ - *(unsigned short *)&k_termios->c_lflag = k_termio.c_lflag; \ - canon = k_termio.c_lflag & ICANON; \ - \ - k_termios->c_cc[VINTR] = k_termio.c_cc[_VINTR]; \ - k_termios->c_cc[VQUIT] = k_termio.c_cc[_VQUIT]; \ - k_termios->c_cc[VERASE] = k_termio.c_cc[_VERASE]; \ - k_termios->c_cc[VKILL] = k_termio.c_cc[_VKILL]; \ - k_termios->c_cc[VEOL2] = k_termio.c_cc[_VEOL2]; \ - k_termios->c_cc[VSWTC] = k_termio.c_cc[_VSWTC]; \ - k_termios->c_cc[canon ? VEOF : VMIN] = k_termio.c_cc[_VEOF]; \ - k_termios->c_cc[canon ? VEOL : VTIME] = k_termio.c_cc[_VEOL]; \ - } \ - ret; \ -}) - -/* - * Translate a "termios" structure into a "termio". Ugh. - * - * Note the "fun" _VMIN overloading. - */ -#define kernel_termios_to_user_termio(u_termio, a_termios) \ -({ \ - struct ktermios *k_termios = (a_termios); \ - struct termio k_termio; \ - int canon; \ - \ - k_termio.c_iflag = k_termios->c_iflag; \ - k_termio.c_oflag = k_termios->c_oflag; \ - k_termio.c_cflag = k_termios->c_cflag; \ - canon = (k_termio.c_lflag = k_termios->c_lflag) & ICANON; \ - \ - k_termio.c_line = k_termios->c_line; \ - k_termio.c_cc[_VINTR] = k_termios->c_cc[VINTR]; \ - k_termio.c_cc[_VQUIT] = k_termios->c_cc[VQUIT]; \ - k_termio.c_cc[_VERASE] = k_termios->c_cc[VERASE]; \ - k_termio.c_cc[_VKILL] = k_termios->c_cc[VKILL]; \ - k_termio.c_cc[_VEOF] = k_termios->c_cc[canon ? VEOF : VMIN]; \ - k_termio.c_cc[_VEOL] = k_termios->c_cc[canon ? VEOL : VTIME]; \ - k_termio.c_cc[_VEOL2] = k_termios->c_cc[VEOL2]; \ - k_termio.c_cc[_VSWTC] = k_termios->c_cc[VSWTC]; \ - \ - copy_to_user(u_termio, &k_termio, sizeof(k_termio)); \ -}) - -#define user_termios_to_kernel_termios(k, u) \ - copy_from_user(k, u, sizeof(struct termios2)) - -#define kernel_termios_to_user_termios(u, k) \ - copy_to_user(u, k, sizeof(struct termios2)) - -#define user_termios_to_kernel_termios_1(k, u) \ - copy_from_user(k, u, sizeof(struct termios)) - -#define kernel_termios_to_user_termios_1(u, k) \ - copy_to_user(u, k, sizeof(struct termios)) - -#endif /* _ALPHA_TERMIOS_H */ diff --git a/arch/alpha/kernel/Makefile b/arch/alpha/kernel/Makefile index 5a74581bf0ee..bd82c8a12f0b 100644 --- a/arch/alpha/kernel/Makefile +++ b/arch/alpha/kernel/Makefile @@ -9,7 +9,7 @@ ccflags-y := -Wno-sign-compare obj-y := entry.o traps.o process.o osf_sys.o irq.o \ irq_alpha.o signal.o setup.o ptrace.o time.o \ - systbls.o err_common.o io.o bugs.o + systbls.o err_common.o io.o bugs.o termios.o obj-$(CONFIG_VGA_HOSE) += console.o obj-$(CONFIG_SMP) += smp.o @@ -47,10 +47,6 @@ else # Misc support obj-$(CONFIG_ALPHA_SRM) += srmcons.o -ifdef CONFIG_BINFMT_AOUT -obj-y += binfmt_loader.o -endif - # Core logic support obj-$(CONFIG_ALPHA_APECS) += core_apecs.o obj-$(CONFIG_ALPHA_CIA) += core_cia.o diff --git a/arch/alpha/kernel/binfmt_loader.c b/arch/alpha/kernel/binfmt_loader.c deleted file mode 100644 index e4be7a543ecf..000000000000 --- a/arch/alpha/kernel/binfmt_loader.c +++ /dev/null @@ -1,46 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include <linux/init.h> -#include <linux/fs.h> -#include <linux/file.h> -#include <linux/mm_types.h> -#include <linux/binfmts.h> -#include <linux/a.out.h> - -static int load_binary(struct linux_binprm *bprm) -{ - struct exec *eh = (struct exec *)bprm->buf; - unsigned long loader; - struct file *file; - int retval; - - if (eh->fh.f_magic != 0x183 || (eh->fh.f_flags & 0x3000) != 0x3000) - return -ENOEXEC; - - if (bprm->loader) - return -ENOEXEC; - - loader = bprm->vma->vm_end - sizeof(void *); - - file = open_exec("/sbin/loader"); - retval = PTR_ERR(file); - if (IS_ERR(file)) - return retval; - - /* Remember if the application is TASO. */ - bprm->taso = eh->ah.entry < 0x100000000UL; - - bprm->interpreter = file; - bprm->loader = loader; - return 0; -} - -static struct linux_binfmt loader_format = { - .load_binary = load_binary, -}; - -static int __init init_loader_binfmt(void) -{ - insert_binfmt(&loader_format); - return 0; -} -arch_initcall(init_loader_binfmt); diff --git a/arch/alpha/kernel/core_marvel.c b/arch/alpha/kernel/core_marvel.c index 1efca79ac83c..6d0b3baf97ff 100644 --- a/arch/alpha/kernel/core_marvel.c +++ b/arch/alpha/kernel/core_marvel.c @@ -803,7 +803,7 @@ void __iomem *marvel_ioportmap (unsigned long addr) return (void __iomem *)addr; } -unsigned int +unsigned u8 marvel_ioread8(const void __iomem *xaddr) { unsigned long addr = (unsigned long) xaddr; diff --git a/arch/alpha/kernel/io.c b/arch/alpha/kernel/io.c index 838586abb1e0..eda09778268f 100644 --- a/arch/alpha/kernel/io.c +++ b/arch/alpha/kernel/io.c @@ -41,6 +41,15 @@ unsigned int ioread32(const void __iomem *addr) return ret; } +u64 ioread64(const void __iomem *addr) +{ + unsigned int ret; + mb(); + ret = IO_CONCAT(__IO_PREFIX,ioread64)(addr); + mb(); + return ret; +} + void iowrite8(u8 b, void __iomem *addr) { mb(); @@ -59,12 +68,20 @@ void iowrite32(u32 b, void __iomem *addr) IO_CONCAT(__IO_PREFIX,iowrite32)(b, addr); } +void iowrite64(u64 b, void __iomem *addr) +{ + mb(); + IO_CONCAT(__IO_PREFIX,iowrite64)(b, addr); +} + EXPORT_SYMBOL(ioread8); EXPORT_SYMBOL(ioread16); EXPORT_SYMBOL(ioread32); +EXPORT_SYMBOL(ioread64); EXPORT_SYMBOL(iowrite8); EXPORT_SYMBOL(iowrite16); EXPORT_SYMBOL(iowrite32); +EXPORT_SYMBOL(iowrite64); u8 inb(unsigned long port) { diff --git a/arch/alpha/kernel/machvec_impl.h b/arch/alpha/kernel/machvec_impl.h index 393d5d6ca5d2..c2ebcb39e589 100644 --- a/arch/alpha/kernel/machvec_impl.h +++ b/arch/alpha/kernel/machvec_impl.h @@ -78,9 +78,11 @@ .mv_ioread8 = CAT(low,_ioread8), \ .mv_ioread16 = CAT(low,_ioread16), \ .mv_ioread32 = CAT(low,_ioread32), \ + .mv_ioread64 = CAT(low,_ioread64), \ .mv_iowrite8 = CAT(low,_iowrite8), \ .mv_iowrite16 = CAT(low,_iowrite16), \ .mv_iowrite32 = CAT(low,_iowrite32), \ + .mv_iowrite64 = CAT(low,_iowrite64), \ .mv_readb = CAT(low,_readb), \ .mv_readw = CAT(low,_readw), \ .mv_readl = CAT(low,_readl), \ diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c index d257293401e2..68ec314d3fac 100644 --- a/arch/alpha/kernel/osf_sys.c +++ b/arch/alpha/kernel/osf_sys.c @@ -108,7 +108,7 @@ struct osf_dirent_callback { int error; }; -static int +static bool osf_filldir(struct dir_context *ctx, const char *name, int namlen, loff_t offset, u64 ino, unsigned int d_type) { @@ -120,11 +120,11 @@ osf_filldir(struct dir_context *ctx, const char *name, int namlen, buf->error = -EINVAL; /* only used if we fail */ if (reclen > buf->count) - return -EINVAL; + return false; d_ino = ino; if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) { buf->error = -EOVERFLOW; - return -EOVERFLOW; + return false; } if (buf->basep) { if (put_user(offset, buf->basep)) @@ -141,10 +141,10 @@ osf_filldir(struct dir_context *ctx, const char *name, int namlen, dirent = (void __user *)dirent + reclen; buf->dirent = dirent; buf->count -= reclen; - return 0; + return true; Efault: buf->error = -EFAULT; - return -EFAULT; + return false; } SYSCALL_DEFINE4(osf_getdirentries, unsigned int, fd, @@ -1278,45 +1278,15 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr, return addr; } -#ifdef CONFIG_OSF4_COMPAT -/* Clear top 32 bits of iov_len in the user's buffer for - compatibility with old versions of OSF/1 where iov_len - was defined as int. */ -static int -osf_fix_iov_len(const struct iovec __user *iov, unsigned long count) -{ - unsigned long i; - - for (i = 0 ; i < count ; i++) { - int __user *iov_len_high = (int __user *)&iov[i].iov_len + 1; - - if (put_user(0, iov_len_high)) - return -EFAULT; - } - return 0; -} -#endif - SYSCALL_DEFINE3(osf_readv, unsigned long, fd, const struct iovec __user *, vector, unsigned long, count) { -#ifdef CONFIG_OSF4_COMPAT - if (unlikely(personality(current->personality) == PER_OSF4)) - if (osf_fix_iov_len(vector, count)) - return -EFAULT; -#endif - return sys_readv(fd, vector, count); } SYSCALL_DEFINE3(osf_writev, unsigned long, fd, const struct iovec __user *, vector, unsigned long, count) { -#ifdef CONFIG_OSF4_COMPAT - if (unlikely(personality(current->personality) == PER_OSF4)) - if (osf_fix_iov_len(vector, count)) - return -EFAULT; -#endif return sys_writev(fd, vector, count); } diff --git a/arch/alpha/kernel/termios.c b/arch/alpha/kernel/termios.c new file mode 100644 index 000000000000..a4c29a22edf7 --- /dev/null +++ b/arch/alpha/kernel/termios.c @@ -0,0 +1,56 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <linux/termios_internal.h> + +int user_termio_to_kernel_termios(struct ktermios *termios, + struct termio __user *termio) +{ + struct termio v; + bool canon; + + if (copy_from_user(&v, termio, sizeof(struct termio))) + return -EFAULT; + + termios->c_iflag = (0xffff0000 & termios->c_iflag) | v.c_iflag; + termios->c_oflag = (0xffff0000 & termios->c_oflag) | v.c_oflag; + termios->c_cflag = (0xffff0000 & termios->c_cflag) | v.c_cflag; + termios->c_lflag = (0xffff0000 & termios->c_lflag) | v.c_lflag; + termios->c_line = (0xffff0000 & termios->c_lflag) | v.c_line; + + canon = v.c_lflag & ICANON; + termios->c_cc[VINTR] = v.c_cc[_VINTR]; + termios->c_cc[VQUIT] = v.c_cc[_VQUIT]; + termios->c_cc[VERASE] = v.c_cc[_VERASE]; + termios->c_cc[VKILL] = v.c_cc[_VKILL]; + termios->c_cc[VEOL2] = v.c_cc[_VEOL2]; + termios->c_cc[VSWTC] = v.c_cc[_VSWTC]; + termios->c_cc[canon ? VEOF : VMIN] = v.c_cc[_VEOF]; + termios->c_cc[canon ? VEOL : VTIME] = v.c_cc[_VEOL]; + + return 0; +} + +int kernel_termios_to_user_termio(struct termio __user *termio, + struct ktermios *termios) +{ + struct termio v; + bool canon; + + memset(&v, 0, sizeof(struct termio)); + v.c_iflag = termios->c_iflag; + v.c_oflag = termios->c_oflag; + v.c_cflag = termios->c_cflag; + v.c_lflag = termios->c_lflag; + v.c_line = termios->c_line; + + canon = v.c_lflag & ICANON; + v.c_cc[_VINTR] = termios->c_cc[VINTR]; + v.c_cc[_VQUIT] = termios->c_cc[VQUIT]; + v.c_cc[_VERASE] = termios->c_cc[VERASE]; + v.c_cc[_VKILL] = termios->c_cc[VKILL]; + v.c_cc[_VEOF] = termios->c_cc[canon ? VEOF : VMIN]; + v.c_cc[_VEOL] = termios->c_cc[canon ? VEOL : VTIME]; + v.c_cc[_VEOL2] = termios->c_cc[VEOL2]; + v.c_cc[_VSWTC] = termios->c_cc[VSWTC]; + + return copy_to_user(termio, &v, sizeof(struct termio)); +} diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 87badeae3181..22dc1d6936bc 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -28,7 +28,6 @@ config ARM select ARCH_HAS_GCOV_PROFILE_ALL select ARCH_KEEP_MEMBLOCK select ARCH_MIGHT_HAVE_PC_PARPORT - select ARCH_NO_SG_CHAIN if !ARM_HAS_SG_CHAIN select ARCH_OPTIONAL_KERNEL_RWX if ARCH_HAS_STRICT_KERNEL_RWX select ARCH_OPTIONAL_KERNEL_RWX_DEFAULT if CPU_V7 select ARCH_SUPPORTS_ATOMIC_RMW @@ -42,6 +41,7 @@ config ARM select ARCH_WANT_LD_ORPHAN_WARN select BINFMT_FLAT_ARGVP_ENVP_ON_STACK select BUILDTIME_TABLE_SORT if MMU + select COMMON_CLK if !(ARCH_RPC || ARCH_FOOTBRIDGE) select CLONE_BACKWARDS select CPU_PM if SUSPEND || CPU_IDLE select DCACHE_WORD_ACCESS if HAVE_EFFICIENT_UNALIGNED_ACCESS @@ -110,6 +110,7 @@ config ARM select HAVE_MOD_ARCH_SPECIFIC select HAVE_NMI select HAVE_OPTPROBES if !THUMB2_KERNEL + select HAVE_PCI if MMU select HAVE_PERF_EVENTS select HAVE_PERF_REGS select HAVE_PERF_USER_STACK_DUMP @@ -126,13 +127,17 @@ config ARM select OF_EARLY_FLATTREE if OF select OLD_SIGACTION select OLD_SIGSUSPEND3 + select PCI_DOMAINS_GENERIC if PCI select PCI_SYSCALL if PCI select PERF_USE_VMALLOC select RTC_LIB + select SPARSE_IRQ if !(ARCH_FOOTBRIDGE || ARCH_RPC) select SYS_SUPPORTS_APM_EMULATION select THREAD_INFO_IN_TASK + select TIMER_OF if OF select HAVE_ARCH_VMAP_STACK if MMU && ARM_HAS_GROUP_RELOCS select TRACE_IRQFLAGS_SUPPORT if !CPU_V7M + select USE_OF if !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100) # Above selects are sorted alphabetically; please add new ones # according to that. Thanks. help @@ -154,12 +159,8 @@ config ARM_HAS_GROUP_RELOCS which is usually sufficient, but not for allyesconfig, so we disable this feature when doing compile testing. -config ARM_HAS_SG_CHAIN - bool - config ARM_DMA_USE_IOMMU bool - select ARM_HAS_SG_CHAIN select NEED_SG_DMA_LENGTH if ARM_DMA_USE_IOMMU @@ -245,7 +246,7 @@ config ARCH_MTD_XIP config ARM_PATCH_PHYS_VIRT bool "Patch physical to virtual translations at runtime" if EMBEDDED default y - depends on !XIP_KERNEL && MMU + depends on MMU help Patch phys-to-virt and virt-to-phys translation functions at boot and module load time according to the position of the @@ -274,7 +275,7 @@ config NEED_MACH_MEMORY_H config PHYS_OFFSET hex "Physical address of main memory" if MMU - depends on !ARM_PATCH_PHYS_VIRT + depends on !ARM_PATCH_PHYS_VIRT || !AUTO_ZRELADDR default DRAM_BASE if !MMU default 0x00000000 if ARCH_FOOTBRIDGE default 0x10000000 if ARCH_OMAP1 || ARCH_RPC @@ -307,13 +308,8 @@ config MMU config ARM_SINGLE_ARMV7M def_bool !MMU select ARM_NVIC - select AUTO_ZRELADDR - select TIMER_OF - select COMMON_CLK select CPU_V7M select NO_IOPORT_MAP - select SPARSE_IRQ - select USE_OF config ARCH_MMAP_RND_BITS_MIN default 8 @@ -323,94 +319,31 @@ config ARCH_MMAP_RND_BITS_MAX default 15 if PAGE_OFFSET=0x80000000 default 16 -# -# The "ARM system type" choice list is ordered alphabetically by option -# text. Please add new entries in the option alphabetic order. -# -choice - prompt "ARM system type" - depends on MMU - default ARCH_MULTIPLATFORM - config ARCH_MULTIPLATFORM - bool "Allow multiple platforms to be selected" - select ARCH_FLATMEM_ENABLE - select ARCH_SPARSEMEM_ENABLE - select ARCH_SELECT_MEMORY_MODEL - select ARM_HAS_SG_CHAIN - select ARM_PATCH_PHYS_VIRT - select AUTO_ZRELADDR - select TIMER_OF - select COMMON_CLK - select HAVE_PCI - select PCI_DOMAINS_GENERIC if PCI - select SPARSE_IRQ - select USE_OF - -config ARCH_FOOTBRIDGE - bool "FootBridge" - depends on CPU_LITTLE_ENDIAN - depends on ATAGS - select CPU_SA110 - select FOOTBRIDGE - select NEED_MACH_MEMORY_H - help - Support for systems based on the DC21285 companion chip - ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. - -config ARCH_RPC - bool "RiscPC" - depends on !CC_IS_CLANG && GCC_VERSION < 90100 && GCC_VERSION >= 60000 - depends on CPU_LITTLE_ENDIAN - depends on ATAGS - select ARCH_ACORN - select ARCH_MAY_HAVE_PC_FDC - select ARCH_SPARSEMEM_ENABLE - select ARM_HAS_SG_CHAIN - select CPU_SA110 - select FIQ - select HAVE_PATA_PLATFORM - select ISA_DMA_API - select LEGACY_TIMER_TICK - select NEED_MACH_IO_H - select NEED_MACH_MEMORY_H - select NO_IOPORT_MAP + bool "Require kernel to be portable to multiple machines" if EXPERT + depends on MMU && !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100) + default y help - On the Acorn Risc-PC, Linux can support the internal IDE disk and - CD-ROM interface, serial and parallel port, and the floppy drive. + In general, all Arm machines can be supported in a single + kernel image, covering either Armv4/v5 or Armv6/v7. -config ARCH_SA1100 - bool "SA1100-based" - depends on CPU_LITTLE_ENDIAN - depends on ATAGS - select ARCH_MTD_XIP - select ARCH_SPARSEMEM_ENABLE - select CLKSRC_MMIO - select CLKSRC_PXA - select TIMER_OF if OF - select COMMON_CLK - select CPU_FREQ - select CPU_SA1100 - select GPIOLIB - select IRQ_DOMAIN - select ISA - select NEED_MACH_MEMORY_H - select SPARSE_IRQ - help - Support for StrongARM 11x0 based boards. + However, some configuration options require hardcoding machine + specific physical addresses or enable errata workarounds that may + break other machines. -endchoice + Selecting N here allows using those options, including + DEBUG_UNCOMPRESS, XIP_KERNEL and ZBOOT_ROM. If unsure, say Y. -menu "Multiple platform selection" - depends on ARCH_MULTIPLATFORM +menu "Platform selection" + depends on MMU comment "CPU Core family selection" config ARCH_MULTI_V4 - bool "ARMv4 based platforms (FA526)" + bool "ARMv4 based platforms (FA526, StrongARM)" depends on !ARCH_MULTI_V6_V7 select ARCH_MULTI_V4_V5 - select CPU_FA526 + select CPU_FA526 if !(CPU_SA110 || CPU_SA1100) config ARCH_MULTI_V4T bool "ARMv4T based platforms (ARM720T, ARM920T, ...)" @@ -472,7 +405,6 @@ config ARCH_AIROHA select ARM_GIC_V3 select ARM_PSCI select HAVE_ARM_ARCH_TIMER - select COMMON_CLK help Support for Airoha EN7523 SoCs @@ -573,6 +505,8 @@ source "arch/arm/mach-rda/Kconfig" source "arch/arm/mach-realtek/Kconfig" +source "arch/arm/mach-rpc/Kconfig" + source "arch/arm/mach-rockchip/Kconfig" source "arch/arm/mach-s3c/Kconfig" @@ -638,7 +572,6 @@ config ARCH_ACORN config PLAT_ORION bool select CLKSRC_MMIO - select COMMON_CLK select GENERIC_IRQ_CHIP select IRQ_DOMAIN @@ -989,11 +922,6 @@ config ISA (MCA) or VESA. ISA is an older system, now being displaced by PCI; newer boards don't support it. If you have ISA, say Y, otherwise N. -# Select ISA DMA controller support -config ISA_DMA - bool - select ISA_DMA_API - # Select ISA DMA interface config ISA_DMA_API bool @@ -1054,7 +982,7 @@ config SMP config SMP_ON_UP bool "Allow booting SMP kernel on uniprocessor systems" - depends on SMP && !XIP_KERNEL && MMU + depends on SMP && MMU default y help SMP kernels contain instructions which fail on non-SMP processors. @@ -1303,7 +1231,7 @@ config THUMB2_KERNEL config ARM_PATCH_IDIV bool "Runtime patch udiv/sdiv instructions into __aeabi_{u}idiv()" - depends on CPU_32v7 && !XIP_KERNEL + depends on CPU_32v7 default y help The ARM compiler inserts calls to __aeabi_idiv() and @@ -1358,13 +1286,13 @@ config OABI_COMPAT at all). If in doubt say N. config ARCH_SELECT_MEMORY_MODEL - bool + def_bool y config ARCH_FLATMEM_ENABLE - bool + def_bool !(ARCH_RPC || ARCH_SA1100) config ARCH_SPARSEMEM_ENABLE - bool + def_bool !ARCH_FOOTBRIDGE select SPARSEMEM_STATIC if SPARSEMEM config HIGHMEM @@ -1671,7 +1599,6 @@ config CMDLINE choice prompt "Kernel command line type" if CMDLINE != "" default CMDLINE_FROM_BOOTLOADER - depends on ATAGS config CMDLINE_FROM_BOOTLOADER bool "Use bootloader kernel arguments if available" @@ -1698,6 +1625,7 @@ endchoice config XIP_KERNEL bool "Kernel Execute-In-Place from ROM" depends on !ARM_LPAE && !ARCH_MULTIPLATFORM + depends on !ARM_PATCH_IDIV && !ARM_PATCH_PHYS_VIRT && !SMP_ON_UP help Execute-In-Place allows the kernel to run from non-volatile storage directly addressable by the CPU, such as NOR flash. This saves RAM @@ -1772,7 +1700,8 @@ config CRASH_DUMP For more details see Documentation/admin-guide/kdump/kdump.rst config AUTO_ZRELADDR - bool "Auto calculation of the decompressed kernel image address" + bool "Auto calculation of the decompressed kernel image address" if !ARCH_MULTIPLATFORM + default !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100) help ZRELADDR is the physical address where the decompressed kernel image will be placed. If AUTO_ZRELADDR is selected, the address diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 792796a348c3..c345775f035b 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -1904,7 +1904,8 @@ config DEBUG_UART_8250_PALMCHIP config DEBUG_UNCOMPRESS bool "Enable decompressor debugging via DEBUG_LL output" - depends on ARCH_MULTIPLATFORM || PLAT_SAMSUNG || ARM_SINGLE_ARMV7M + depends on !ARCH_MULTIPLATFORM + depends on !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100) depends on DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \ (!DEBUG_TEGRA_UART || !ZBOOT_ROM) && \ !DEBUG_BRCMSTB_UART && !DEBUG_SEMIHOSTING @@ -1921,9 +1922,8 @@ config DEBUG_UNCOMPRESS config UNCOMPRESS_INCLUDE string - default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \ - PLAT_SAMSUNG || ARM_SINGLE_ARMV7M - default "mach/uncompress.h" + default "mach/uncompress.h" if ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100 + default "debug/uncompress.h" config EARLY_PRINTK bool "Early printk" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 56f655deebb1..0e04bc6b2ad3 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -22,6 +22,9 @@ GZFLAGS :=-9 # Never generate .eh_frame KBUILD_CFLAGS += $(call cc-option,-fno-dwarf2-cfi-asm) +# Disable FDPIC ABI +KBUILD_CFLAGS += $(call cc-option,-mno-fdpic) + # This should work on most of the modern platforms KBUILD_DEFCONFIG := multi_v7_defconfig @@ -224,40 +227,24 @@ machine-$(CONFIG_ARCH_ZYNQ) += zynq machine-$(CONFIG_PLAT_VERSATILE) += versatile machine-$(CONFIG_PLAT_SPEAR) += spear -# Platform directory name. This list is sorted alphanumerically -# by CONFIG_* macro name. -plat-$(CONFIG_PLAT_ORION) += orion +# legacy platforms provide their own mach/*.h headers globally, +# these three are mutually exclusive +machdirs-$(CONFIG_ARCH_FOOTBRIDGE) += arch/arm/mach-footbridge +machdirs-$(CONFIG_ARCH_RPC) += arch/arm/mach-rpc +machdirs-$(CONFIG_ARCH_SA1100) += arch/arm/mach-sa1100 +KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%/include,$(machdirs-y)) # The byte offset of the kernel image in RAM from the start of RAM. TEXT_OFFSET := $(textofs-y) -# The first directory contains additional information for the boot setup code -ifneq ($(machine-y),) -MACHINE := arch/arm/mach-$(word 1,$(machine-y))/ -else -MACHINE := -endif -ifeq ($(CONFIG_ARCH_MULTIPLATFORM),y) -MACHINE := -endif - -machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y)) -platdirs := $(patsubst %,arch/arm/plat-%/,$(sort $(plat-y))) - -ifneq ($(CONFIG_ARCH_MULTIPLATFORM),y) -ifneq ($(CONFIG_ARM_SINGLE_ARMV7M),y) -KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%include,$(machdirs) $(platdirs)) -endif -endif - export TEXT_OFFSET GZFLAGS MMUEXT # If we have a machine-specific directory, then include it in the build. -core-y += $(machdirs) $(platdirs) - +core-y += $(patsubst %,arch/arm/mach-%/,$(machine-y)) # For cleaning -core- += $(patsubst %,arch/arm/mach-%/, $(machine-)) -core- += $(patsubst %,arch/arm/plat-%/, $(plat-)) +core- += $(patsubst %,arch/arm/mach-%/,$(machine-)) + +core-$(CONFIG_PLAT_ORION) += arch/arm/plat-orion/ libs-y := arch/arm/lib/ $(libs-y) @@ -310,7 +297,7 @@ bootpImage uImage: zImage zImage: Image $(BOOT_TARGETS): vmlinux - $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ + $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ @$(kecho) ' Kernel: $(boot)/$@ is ready' $(INSTALL_TARGETS): KBUILD_IMAGE = $(boot)/$(patsubst %install,%Image,$@) @@ -324,7 +311,7 @@ ifeq ($(CONFIG_VDSO),y) endif # My testing targets (bypasses dependencies) -bp:; $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/bootpImage +bp:; $(Q)$(MAKE) $(build)=$(boot) $(boot)/bootpImage define archhelp diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index 54a09f9464fb..abd6a2889fd0 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -10,22 +10,16 @@ # # Copyright (C) 1995-2002 Russell King # - OBJCOPYFLAGS :=-O binary -R .comment -S -ifneq ($(MACHINE),) -include $(MACHINE)/Makefile.boot -endif - -# Note: the following conditions must always be true: # ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET) -# PARAMS_PHYS must be within 4MB of ZRELADDR -# INITRD_PHYS must be in RAM -ZRELADDR := $(zreladdr-y) -PARAMS_PHYS := $(params_phys-y) -INITRD_PHYS := $(initrd_phys-y) +ifdef CONFIG_PHYS_OFFSET +add_hex = $(shell printf 0x%x $$(( $(1) + $(2) )) ) +ZRELADDR := $(call add_hex, $(CONFIG_PHYS_OFFSET), $(TEXT_OFFSET)) +endif -export ZRELADDR INITRD_PHYS PARAMS_PHYS +PHYS_OFFSET := $(CONFIG_PHYS_OFFSET) +export ZRELADDR PARAMS_PHYS PHYS_OFFSET targets := Image zImage xipImage bootpImage uImage @@ -90,17 +84,10 @@ $(obj)/uImage: $(obj)/zImage FORCE @$(check_for_multiple_loadaddr) $(call if_changed,uimage) -$(obj)/bootp/bootp: $(obj)/zImage initrd FORCE +$(obj)/bootp/bootp: $(obj)/zImage FORCE $(Q)$(MAKE) $(build)=$(obj)/bootp $@ $(obj)/bootpImage: $(obj)/bootp/bootp FORCE $(call if_changed,objcopy) -PHONY += initrd -initrd: - @test "$(INITRD_PHYS)" != "" || \ - (echo This machine does not support INITRD; exit -1) - @test "$(INITRD)" != "" || \ - (echo You must specify INITRD; exit -1) - subdir- := bootp compressed dts diff --git a/arch/arm/boot/bootp/Makefile b/arch/arm/boot/bootp/Makefile index 981a8d03f064..a2934e6fd89a 100644 --- a/arch/arm/boot/bootp/Makefile +++ b/arch/arm/boot/bootp/Makefile @@ -5,9 +5,40 @@ # This file is included by the global makefile so that you can add your own # architecture-specific flags and dependencies. # - GCOV_PROFILE := n +ifdef PHYS_OFFSET +add_hex = $(shell printf 0x%x $$(( $(1) + $(2) )) ) + +# If PHYS_OFFSET is set, INITRD_PHYS and PARAMS_PHYS can be derived, +# otherwise they must be passed on the command line. +# +# Note: the following conditions must always be true: +# PARAMS_PHYS must be within 4MB of ZRELADDR +# INITRD_PHYS must be in RAM + +PARAMS_PHYS := $(call add_hex, $(PHYS_OFFSET), 0x100) + +# guess an initrd location if possible +initrd_offset-$(CONFIG_ARCH_FOOTBRIDGE) += 0x00800000 +initrd_offset-$(CONFIG_ARCH_SA1100) += 0x00800000 +initrd_offset-$(CONFIG_ARCH_RPC) += 0x08000000 +INITRD_OFFSET := $(initrd_offset-y) +ifdef INITRD_OFFSET +INITRD_PHYS := $(call add_hex, $(PHYS_OFFSET), $(INITRD_OFFSET)) +endif + +endif + +PHONY += initrd +initrd: + @test "$(PARAMS_PHYS)" != "" || \ + (echo bootpImage: You must specify PHYS_OFFSET of PARAMS_PHYS ; exit -1) + @test "$(INITRD_PHYS)" != "" || \ + (echo bootpImage: You must specify INITRD_OFFSET or INITRD_PHYS ; exit -1) + @test "$(INITRD)" != "" || \ + (echo bootpImage: You must specify INITRD; exit -1) + LDFLAGS_bootp := --no-undefined -X \ --defsym initrd_phys=$(INITRD_PHYS) \ --defsym params_phys=$(PARAMS_PHYS) -T @@ -24,6 +55,6 @@ $(obj)/bootp: $(src)/bootp.lds $(addprefix $(obj)/,init.o kernel.o initrd.o) FOR $(obj)/kernel.o: arch/arm/boot/zImage FORCE -$(obj)/initrd.o: $(INITRD) FORCE +$(obj)/initrd.o: initrd $(INITRD) FORCE PHONY += $(INITRD) diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index bf79f2f78d23..9f406e9c0ea6 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -67,11 +67,7 @@ #if defined(CONFIG_ARCH_SA1100) .macro loadsp, rb, tmp1, tmp2 mov \rb, #0x80000000 @ physical base address -#ifdef CONFIG_DEBUG_LL_SER3 - add \rb, \rb, #0x00050000 @ Ser3 -#else add \rb, \rb, #0x00010000 @ Ser1 -#endif .endm #else .macro loadsp, rb, tmp1, tmp2 diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c index cb2e069dc73f..abfed1aa2baa 100644 --- a/arch/arm/boot/compressed/misc.c +++ b/arch/arm/boot/compressed/misc.c @@ -23,7 +23,9 @@ unsigned int __machine_arch_type; #include <linux/types.h> #include <linux/linkage.h> #include "misc.h" +#ifdef CONFIG_ARCH_EP93XX #include "misc-ep93xx.h" +#endif static void putstr(const char *ptr); diff --git a/arch/arm/boot/compressed/vmlinux.lds.S b/arch/arm/boot/compressed/vmlinux.lds.S index 1bcb68ac4b01..3fcb3e62dc56 100644 --- a/arch/arm/boot/compressed/vmlinux.lds.S +++ b/arch/arm/boot/compressed/vmlinux.lds.S @@ -23,6 +23,7 @@ SECTIONS *(.ARM.extab*) *(.note.*) *(.rel.*) + *(.printk_index) /* * Discard any r/w data - this produces a link error if we have any, * which is required for PIC decompression. Local data generates @@ -57,6 +58,7 @@ SECTIONS *(.rodata) *(.rodata.*) *(.data.rel.ro) + *(.data.rel.ro.*) } .piggydata : { *(.piggydata) diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 05d8aef6e5d2..6aa7dc4db2fc 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -61,6 +61,7 @@ dtb-$(CONFIG_SOC_SAM_V7) += \ at91-sama5d2_icp.dtb \ at91-sama5d2_ptc_ek.dtb \ at91-sama5d2_xplained.dtb \ + at91-sama5d3_eds.dtb \ at91-sama5d3_ksz9477_evb.dtb \ at91-sama5d3_xplained.dtb \ at91-dvk_som60.dtb \ @@ -706,8 +707,8 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ul-geam.dtb \ imx6ul-isiot-emmc.dtb \ imx6ul-isiot-nand.dtb \ - imx6ul-kontron-n6310-s.dtb \ - imx6ul-kontron-n6310-s-43.dtb \ + imx6ul-kontron-bl.dtb \ + imx6ul-kontron-bl-43.dtb \ imx6ul-liteboard.dtb \ imx6ul-tqma6ul1-mba6ulx.dtb \ imx6ul-tqma6ul2-mba6ulx.dtb \ @@ -736,6 +737,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ull-colibri-wifi-iris.dtb \ imx6ull-colibri-wifi-iris-v2.dtb \ imx6ull-jozacp.dtb \ + imx6ull-kontron-bl.dtb \ imx6ull-myir-mys-6ulx-eval.dtb \ imx6ull-opos6uldev.dtb \ imx6ull-phytec-segin-ff-rdk-nand.dtb \ @@ -788,6 +790,7 @@ dtb-$(CONFIG_SOC_IMXRT) += \ dtb-$(CONFIG_SOC_LAN966) += \ lan966x-kontron-kswitch-d10-mmt-6g-2gs.dtb \ lan966x-kontron-kswitch-d10-mmt-8g.dtb \ + lan966x-pcb8290.dtb \ lan966x-pcb8291.dtb \ lan966x-pcb8309.dtb dtb-$(CONFIG_SOC_LS1021A) += \ @@ -1047,6 +1050,9 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-ipq8064-rb3011.dtb \ qcom-msm8226-samsung-s3ve3g.dtb \ qcom-msm8660-surf.dtb \ + qcom-msm8916-samsung-e5.dtb \ + qcom-msm8916-samsung-e7.dtb \ + qcom-msm8916-samsung-grandmax.dtb \ qcom-msm8916-samsung-serranove.dtb \ qcom-msm8960-cdp.dtb \ qcom-msm8974-lge-nexus5-hammerhead.dtb \ @@ -1574,8 +1580,10 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-ast2500-evb.dtb \ aspeed-ast2600-evb-a1.dtb \ aspeed-ast2600-evb.dtb \ + aspeed-bmc-amd-daytonax.dtb \ aspeed-bmc-amd-ethanolx.dtb \ aspeed-bmc-ampere-mtjade.dtb \ + aspeed-bmc-ampere-mtmitchell.dtb \ aspeed-bmc-arm-stardragon4800-rep2.dtb \ aspeed-bmc-asrock-e3c246d4i.dtb \ aspeed-bmc-asrock-romed8hm3.dtb \ diff --git a/arch/arm/boot/dts/am335x-baltos-ir2110.dts b/arch/arm/boot/dts/am335x-baltos-ir2110.dts index daf4cb398070..75992eec830f 100644 --- a/arch/arm/boot/dts/am335x-baltos-ir2110.dts +++ b/arch/arm/boot/dts/am335x-baltos-ir2110.dts @@ -81,3 +81,147 @@ pinctrl-0 = <&mmc1_pins>; cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; + +&gpio0 { + gpio-line-names = + "MDIO", + "MDC", + "NC", + "NC", + "I2C1_SDA", + "I2C1_SCL", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "UART1_CTSN", + "UART1_RTSN", + "UART1_RX", + "UART1_TX", + "onrisc:blue:wlan", + "onrisc:green:app", + "USB0_DRVVBUS", + "ETH2_INT", + "NC", + "RMII1_TXD1", + "MMC1_DAT0", + "MMC1_DAT1", + "NC", + "NC", + "MMC1_DAT2", + "MMC1_DAT3", + "RMII1_TXD0", + "NC", + "GPMC_WAIT0", + "GPMC_WP_N"; +}; + +&gpio1 { + gpio-line-names = + "GPMC_AD0", + "GPMC_AD1", + "GPMC_AD2", + "GPMC_AD3", + "GPMC_AD4", + "GPMC_AD5", + "GPMC_AD6", + "GPMC_AD7", + "NC", + "NC", + "CONSOLE_RX", + "CONSOLE_TX", + "NC", + "NC", + "NC", + "SD_CD", + "RGMII2_TCTL", + "RGMII2_RCTL", + "RGMII2_TD3", + "RGMII2_TD2", + "RGMII2_TD1", + "RGMII2_TD0", + "RGMII2_TCLK", + "RGMII2_RCLK", + "RGMII2_RD3", + "RGMII2_RD2", + "RGMII2_RD1", + "RGMII2_RD0", + "PMIC_INT1", + "GPMC_CSN0_Flash", + "MMC1_CLK", + "MMC1_CMD"; +}; + +&gpio2 { + gpio-line-names = + "GPMC_CSN3_BUS", + "GPMC_CLK", + "GPMC_ADVN_ALE", + "GPMC_OEN_RE_N", + "GPMC_WE_N", + "GPMC_BEN0_CLE", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "SW2_0", + "SW2_1", + "RMII1_RXD1", + "RMII1_RXD0", + "UART1_DTR", + "UART1_DSR", + "UART1_DCD", + "UART1_RI", + "MMC0_DAT3", + "MMC0_DAT2", + "MMC0_DAT1", + "MMC0_DAT0", + "MMC0_CLK", + "MMC0_CMD"; +}; + +&gpio3 { + gpio-line-names = + "onrisc:red:power", + "RMII1_CRS_DV", + "RMII1_RXER", + "RMII1_TXEN", + "NC", + "NC", + "NC", + "WLAN_IRQ", + "WLAN_EN", + "SW2_2", + "SW2_3", + "NC", + "NC", + "NC", + "ModeA0", + "ModeA1", + "ModeA2", + "ModeA3", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC"; +}; diff --git a/arch/arm/boot/dts/am335x-baltos-ir3220.dts b/arch/arm/boot/dts/am335x-baltos-ir3220.dts index 2123bd589484..087e084506d2 100644 --- a/arch/arm/boot/dts/am335x-baltos-ir3220.dts +++ b/arch/arm/boot/dts/am335x-baltos-ir3220.dts @@ -91,6 +91,10 @@ interrupts = <20 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&tca6416_pins>; + gpio-line-names = "GP_IN0", "GP_IN1", "GP_IN2", "GP_IN3", + "GP_OUT0", "GP_OUT1", "GP_OUT2", "GP_OUT3", + "ModeA0", "ModeA1", "ModeA2", "ModeA3", + "ModeB0", "ModeB1", "ModeB2", "ModeB3"; }; }; @@ -123,3 +127,147 @@ pinctrl-0 = <&mmc1_pins>; cd-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>; }; + +&gpio0 { + gpio-line-names = + "MDIO", + "MDC", + "UART2_RX", + "UART2_TX", + "I2C1_SDA", + "I2C1_SCL", + "WLAN_BTN", + "W_DISABLE", + "NC", + "NC", + "NC", + "NC", + "UART1_CTSN", + "UART1_RTSN", + "UART1_RX", + "UART1_TX", + "onrisc:blue:wlan", + "onrisc:green:app", + "USB0_DRVVBUS", + "ETH2_INT", + "TCA6416_INT", + "RMII1_TXD1", + "MMC1_DAT0", + "MMC1_DAT1", + "NC", + "NC", + "MMC1_DAT2", + "MMC1_DAT3", + "RMII1_TXD0", + "NC", + "GPMC_WAIT0", + "GPMC_WP_N"; +}; + +&gpio1 { + gpio-line-names = + "GPMC_AD0", + "GPMC_AD1", + "GPMC_AD2", + "GPMC_AD3", + "GPMC_AD4", + "GPMC_AD5", + "GPMC_AD6", + "GPMC_AD7", + "NC", + "NC", + "CONSOLE_RX", + "CONSOLE_TX", + "UART2_DTR", + "UART2_DSR", + "UART2_DCD", + "UART2_RI", + "RGMII2_TCTL", + "RGMII2_RCTL", + "RGMII2_TD3", + "RGMII2_TD2", + "RGMII2_TD1", + "RGMII2_TD0", + "RGMII2_TCLK", + "RGMII2_RCLK", + "RGMII2_RD3", + "RGMII2_RD2", + "RGMII2_RD1", + "RGMII2_RD0", + "PMIC_INT1", + "GPMC_CSN0_Flash", + "MMC1_CLK", + "MMC1_CMD"; +}; + +&gpio2 { + gpio-line-names = + "GPMC_CSN3_BUS", + "GPMC_CLK", + "GPMC_ADVN_ALE", + "GPMC_OEN_RE_N", + "GPMC_WE_N", + "GPMC_BEN0_CLE", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "SD_CD", + "SD_WP", + "RMII1_RXD1", + "RMII1_RXD0", + "UART1_DTR", + "UART1_DSR", + "UART1_DCD", + "UART1_RI", + "MMC0_DAT3", + "MMC0_DAT2", + "MMC0_DAT1", + "MMC0_DAT0", + "MMC0_CLK", + "MMC0_CMD"; +}; + +&gpio3 { + gpio-line-names = + "onrisc:red:power", + "RMII1_CRS_DV", + "RMII1_RXER", + "RMII1_TXEN", + "3G_PWR_EN", + "UART2_CTSN", + "UART2_RTSN", + "WLAN_IRQ", + "WLAN_EN", + "NC", + "NC", + "NC", + "NC", + "USB1_DRVVBUS", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC"; +}; diff --git a/arch/arm/boot/dts/am335x-baltos-ir5221.dts b/arch/arm/boot/dts/am335x-baltos-ir5221.dts index 2f3872dbf4f4..faeb39aab60a 100644 --- a/arch/arm/boot/dts/am335x-baltos-ir5221.dts +++ b/arch/arm/boot/dts/am335x-baltos-ir5221.dts @@ -99,6 +99,10 @@ interrupts = <20 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&tca6416_pins>; + gpio-line-names = "GP_IN0", "GP_IN1", "GP_IN2", "GP_IN3", + "GP_OUT0", "GP_OUT1", "GP_OUT2", "GP_OUT3", + "ModeA0", "ModeA1", "ModeA2", "ModeA3", + "ModeB0", "ModeB1", "ModeB2", "ModeB3"; }; }; @@ -147,3 +151,147 @@ pinctrl-0 = <&mmc1_pins>; cd-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>; }; + +&gpio0 { + gpio-line-names = + "MDIO", + "MDC", + "UART2_RX", + "UART2_TX", + "I2C1_SDA", + "I2C1_SCL", + "WLAN_BTN", + "W_DISABLE", + "NC", + "NC", + "NC", + "NC", + "UART1_CTSN", + "UART1_RTSN", + "UART1_RX", + "UART1_TX", + "onrisc:blue:wlan", + "onrisc:green:app", + "USB0_DRVVBUS", + "ETH2_INT", + "TCA6416_INT", + "RMII1_TXD1", + "MMC1_DAT0", + "MMC1_DAT1", + "NC", + "NC", + "MMC1_DAT2", + "MMC1_DAT3", + "RMII1_TXD0", + "NC", + "GPMC_WAIT0", + "GPMC_WP_N"; +}; + +&gpio1 { + gpio-line-names = + "GPMC_AD0", + "GPMC_AD1", + "GPMC_AD2", + "GPMC_AD3", + "GPMC_AD4", + "GPMC_AD5", + "GPMC_AD6", + "GPMC_AD7", + "DCAN1_TX", + "DCAN1_RX", + "CONSOLE_RX", + "CONSOLE_TX", + "UART2_DTR", + "UART2_DSR", + "UART2_DCD", + "UART2_RI", + "RGMII2_TCTL", + "RGMII2_RCTL", + "RGMII2_TD3", + "RGMII2_TD2", + "RGMII2_TD1", + "RGMII2_TD0", + "RGMII2_TCLK", + "RGMII2_RCLK", + "RGMII2_RD3", + "RGMII2_RD2", + "RGMII2_RD1", + "RGMII2_RD0", + "PMIC_INT1", + "GPMC_CSN0_Flash", + "MMC1_CLK", + "MMC1_CMD"; +}; + +&gpio2 { + gpio-line-names = + "GPMC_CSN3_BUS", + "GPMC_CLK", + "GPMC_ADVN_ALE", + "GPMC_OEN_RE_N", + "GPMC_WE_N", + "GPMC_BEN0_CLE", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "SD_CD", + "SD_WP", + "RMII1_RXD1", + "RMII1_RXD0", + "UART1_DTR", + "UART1_DSR", + "UART1_DCD", + "UART1_RI", + "MMC0_DAT3", + "MMC0_DAT2", + "MMC0_DAT1", + "MMC0_DAT0", + "MMC0_CLK", + "MMC0_CMD"; +}; + +&gpio3 { + gpio-line-names = + "onrisc:red:power", + "RMII1_CRS_DV", + "RMII1_RXER", + "RMII1_TXEN", + "3G_PWR_EN", + "UART2_CTSN", + "UART2_RTSN", + "WLAN_IRQ", + "WLAN_EN", + "NC", + "NC", + "NC", + "NC", + "USB1_DRVVBUS", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC"; +}; diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi index d3eafee79a23..6161c8929a78 100644 --- a/arch/arm/boot/dts/am335x-baltos.dtsi +++ b/arch/arm/boot/dts/am335x-baltos.dtsi @@ -197,7 +197,7 @@ rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ nand-bus-width = <8>; ti,nand-ecc-opt = "bch8"; - ti,nand-xfer-type = "polled"; + ti,nand-xfer-type = "prefetch-dma"; gpmc,device-nand = "true"; gpmc,device-width = <1>; diff --git a/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts b/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts index 57e756b0f192..2e049489ac06 100644 --- a/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts +++ b/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts @@ -85,3 +85,147 @@ status = "okay"; }; + +&gpio0 { + gpio-line-names = + "MDIO", + "MDC", + "NC", + "NC", + "I2C1_SDA", + "I2C1_SCL", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "can_data", + "can_error", + "onrisc:blue:wlan", + "onrisc:green:app", + "USB0_DRVVBUS", + "ETH2_INT", + "NC", + "NC", + "MMC1_DAT0", + "MMC1_DAT1", + "NC", + "NC", + "MMC1_DAT2", + "MMC1_DAT3", + "NC", + "NC", + "GPMC_WAIT0", + "GPMC_WP_N"; +}; + +&gpio1 { + gpio-line-names = + "GPMC_AD0", + "GPMC_AD1", + "GPMC_AD2", + "GPMC_AD3", + "GPMC_AD4", + "GPMC_AD5", + "GPMC_AD6", + "GPMC_AD7", + "DCAN1_TX", + "DCAN1_RX", + "CONSOLE_RX", + "CONSOLE_TX", + "NC", + "NC", + "NC", + "NC", + "RGMII2_TCTL", + "RGMII2_RCTL", + "RGMII2_TD3", + "RGMII2_TD2", + "RGMII2_TD1", + "RGMII2_TD0", + "RGMII2_TCLK", + "RGMII2_RCLK", + "RGMII2_RD3", + "RGMII2_RD2", + "RGMII2_RD1", + "RGMII2_RD0", + "PMIC_INT1", + "GPMC_CSN0_Flash", + "MMC1_CLK", + "MMC1_CMD"; +}; + +&gpio2 { + gpio-line-names = + "GPMC_CSN3_BUS", + "GPMC_CLK", + "GPMC_ADVN_ALE", + "GPMC_OEN_RE_N", + "GPMC_WE_N", + "GPMC_BEN0_CLE", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "SW2_0", + "SW2_1", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "MMC0_DAT3", + "MMC0_DAT2", + "MMC0_DAT1", + "MMC0_DAT0", + "MMC0_CLK", + "MMC0_CMD"; +}; + +&gpio3 { + gpio-line-names = + "onrisc:red:power", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "WLAN_IRQ", + "WLAN_EN", + "SW2_2", + "SW2_3", + "NC", + "NC", + "NC", + "ModeA0", + "ModeA1", + "ModeA2", + "ModeA3", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC"; +}; diff --git a/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts b/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts index c6cc1c6218a9..6ed886c3306b 100644 --- a/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts +++ b/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts @@ -93,3 +93,147 @@ ti,dual-emac-pvid = <2>; phy-handle = <&phy1>; }; + +&gpio0 { + gpio-line-names = + "MDIO", + "MDC", + "UART2_RX", + "UART2_TX", + "I2C1_SDA", + "I2C1_SCL", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "UART1_CTSN", + "UART1_RTSN", + "UART1_RX", + "UART1_TX", + "onrisc:blue:wlan", + "onrisc:green:app", + "USB0_DRVVBUS", + "ETH2_INT", + "NC", + "NC", + "MMC1_DAT0", + "MMC1_DAT1", + "NC", + "NC", + "MMC1_DAT2", + "MMC1_DAT3", + "NC", + "NC", + "GPMC_WAIT0", + "GPMC_WP_N"; +}; + +&gpio1 { + gpio-line-names = + "GPMC_AD0", + "GPMC_AD1", + "GPMC_AD2", + "GPMC_AD3", + "GPMC_AD4", + "GPMC_AD5", + "GPMC_AD6", + "GPMC_AD7", + "NC", + "NC", + "CONSOLE_RX", + "CONSOLE_TX", + "UART2_DTR", + "UART2_DSR", + "UART2_DCD", + "UART2_RI", + "RGMII2_TCTL", + "RGMII2_RCTL", + "RGMII2_TD3", + "RGMII2_TD2", + "RGMII2_TD1", + "RGMII2_TD0", + "RGMII2_TCLK", + "RGMII2_RCLK", + "RGMII2_RD3", + "RGMII2_RD2", + "RGMII2_RD1", + "RGMII2_RD0", + "PMIC_INT1", + "GPMC_CSN0_Flash", + "MMC1_CLK", + "MMC1_CMD"; +}; + +&gpio2 { + gpio-line-names = + "GPMC_CSN3_BUS", + "GPMC_CLK", + "GPMC_ADVN_ALE", + "GPMC_OEN_RE_N", + "GPMC_WE_N", + "GPMC_BEN0_CLE", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "SW2_0", + "SW2_1", + "NC", + "NC", + "UART1_DTR", + "UART1_DSR", + "UART1_DCD", + "UART1_RI", + "MMC0_DAT3", + "MMC0_DAT2", + "MMC0_DAT1", + "MMC0_DAT0", + "MMC0_CLK", + "MMC0_CMD"; +}; + +&gpio3 { + gpio-line-names = + "onrisc:red:power", + "NC", + "NC", + "NC", + "NC", + "UART2_CTSN", + "UART2_RTSN", + "WLAN_IRQ", + "WLAN_EN", + "SW2_2", + "SW2_3", + "NC", + "NC", + "NC", + "ModeA0", + "ModeA1", + "ModeA2", + "ModeA3", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC"; +}; diff --git a/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts b/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts index 96dffd3ffd85..ad3adc7679f9 100644 --- a/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts +++ b/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts @@ -71,6 +71,10 @@ interrupts = <20 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&tca6416_pins>; + gpio-line-names = "GP_IN0", "GP_IN1", "GP_IN2", "GP_IN3", + "GP_IN4", "GP_IN5", "GP_IN6", "GP_IN7", + "GP_OUT0", "GP_OUT1", "GP_OUT2", "GP_OUT3", + "GP_OUT4", "GP_OUT5", "GP_OUT6", "GP_OUT7"; }; }; @@ -86,6 +90,10 @@ reg = <0x20>; gpio-controller; #gpio-cells = <2>; + gpio-line-names = "CH1_M0", "CH1_M1", "CH1_M2", "CH1_M3", + "CH2_M0", "CH2_M1", "CH2_M2", "CH2_M3", + "CH3_M0", "CH3_M1", "CH3_M2", "CH3_M3", + "CH4_M0", "CH4_M1", "CH4_M2", "CH4_M3"; }; tca6416c: gpio@21 { @@ -93,6 +101,10 @@ reg = <0x21>; gpio-controller; #gpio-cells = <2>; + gpio-line-names = "CH5_M0", "CH5_M1", "CH5_M2", "CH5_M3", + "CH6_M0", "CH6_M1", "CH6_M2", "CH6_M3", + "CH7_M0", "CH7_M1", "CH7_M2", "CH7_M3", + "CH8_M0", "CH8_M1", "CH8_M2", "CH8_M3"; }; }; @@ -113,3 +125,147 @@ ti,dual-emac-pvid = <2>; phy-handle = <&phy1>; }; + +&gpio0 { + gpio-line-names = + "MDIO", + "MDC", + "NC", + "NC", + "I2C1_SDA", + "I2C1_SCL", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "I2C2_SDA", + "I2C2_SCL", + "NC", + "NC", + "onrisc:blue:wlan", + "onrisc:green:app", + "USB0_DRVVBUS", + "ETH2_INT", + "NC", + "NC", + "MMC1_DAT0", + "MMC1_DAT1", + "NC", + "NC", + "MMC1_DAT2", + "MMC1_DAT3", + "NC", + "NC", + "GPMC_WAIT0", + "GPMC_WP_N"; +}; + +&gpio1 { + gpio-line-names = + "GPMC_AD0", + "GPMC_AD1", + "GPMC_AD2", + "GPMC_AD3", + "GPMC_AD4", + "GPMC_AD5", + "GPMC_AD6", + "GPMC_AD7", + "NC", + "NC", + "CONSOLE_RX", + "CONSOLE_TX", + "SW2_0_alt", + "SW2_1_alt", + "SW2_2_alt", + "SW2_3_alt", + "RGMII2_TCTL", + "RGMII2_RCTL", + "RGMII2_TD3", + "RGMII2_TD2", + "RGMII2_TD1", + "RGMII2_TD0", + "RGMII2_TCLK", + "RGMII2_RCLK", + "RGMII2_RD3", + "RGMII2_RD2", + "RGMII2_RD1", + "RGMII2_RD0", + "PMIC_INT1", + "GPMC_CSN0_Flash", + "MMC1_CLK", + "MMC1_CMD"; +}; + +&gpio2 { + gpio-line-names = + "GPMC_CSN3_BUS", + "GPMC_CLK", + "GPMC_ADVN_ALE", + "GPMC_OEN_RE_N", + "GPMC_WE_N", + "GPMC_BEN0_CLE", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "SW2_0", + "SW2_1", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "MMC0_DAT3", + "MMC0_DAT2", + "MMC0_DAT1", + "MMC0_DAT0", + "MMC0_CLK", + "MMC0_CMD"; +}; + +&gpio3 { + gpio-line-names = + "onrisc:red:power", + "NC", + "NC", + "NC", + "3G_PWR_EN", + "NC", + "NC", + "WLAN_IRQ", + "WLAN_EN", + "SW2_2", + "SW2_3", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC"; +}; diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi index 7da42a5b959c..7e50fe633d8a 100644 --- a/arch/arm/boot/dts/am33xx-l4.dtsi +++ b/arch/arm/boot/dts/am33xx-l4.dtsi @@ -1502,8 +1502,7 @@ mmc1: mmc@0 { compatible = "ti,am335-sdhci"; ti,needs-special-reset; - dmas = <&edma_xbar 24 0 0 - &edma_xbar 25 0 0>; + dmas = <&edma 24 0>, <&edma 25 0>; dma-names = "tx", "rx"; interrupts = <64>; reg = <0x0 0x1000>; diff --git a/arch/arm/boot/dts/am5748.dtsi b/arch/arm/boot/dts/am5748.dtsi index c260aa1a85bd..a1f029e9d1f3 100644 --- a/arch/arm/boot/dts/am5748.dtsi +++ b/arch/arm/boot/dts/am5748.dtsi @@ -25,6 +25,10 @@ status = "disabled"; }; +&usb4_tm { + status = "disabled"; +}; + &atl_tm { status = "disabled"; }; diff --git a/arch/arm/boot/dts/arm-realview-eb.dtsi b/arch/arm/boot/dts/arm-realview-eb.dtsi index 2dfb32bf9d48..fbb2258b451f 100644 --- a/arch/arm/boot/dts/arm-realview-eb.dtsi +++ b/arch/arm/boot/dts/arm-realview-eb.dtsi @@ -399,7 +399,7 @@ compatible = "arm,pl022", "arm,primecell"; reg = <0x1000d000 0x1000>; clocks = <&sspclk>, <&pclk>; - clock-names = "SSPCLK", "apb_pclk"; + clock-names = "sspclk", "apb_pclk"; }; wdog: watchdog@10010000 { diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts index 06b8723b09eb..efed325af88d 100644 --- a/arch/arm/boot/dts/arm-realview-pb1176.dts +++ b/arch/arm/boot/dts/arm-realview-pb1176.dts @@ -410,7 +410,7 @@ interrupt-parent = <&intc_dc1176>; interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>; clocks = <&sspclk>, <&pclk>; - clock-names = "SSPCLK", "apb_pclk"; + clock-names = "sspclk", "apb_pclk"; }; pb1176_serial0: serial@1010c000 { diff --git a/arch/arm/boot/dts/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm-realview-pb11mp.dts index 295aef448123..89103d54ecc1 100644 --- a/arch/arm/boot/dts/arm-realview-pb11mp.dts +++ b/arch/arm/boot/dts/arm-realview-pb11mp.dts @@ -555,7 +555,7 @@ interrupt-parent = <&intc_pb11mp>; interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; clocks = <&sspclk>, <&pclk>; - clock-names = "SSPCLK", "apb_pclk"; + clock-names = "sspclk", "apb_pclk"; }; watchdog@1000f000 { diff --git a/arch/arm/boot/dts/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm-realview-pbx.dtsi index 6f61f968d689..ec1507c5147c 100644 --- a/arch/arm/boot/dts/arm-realview-pbx.dtsi +++ b/arch/arm/boot/dts/arm-realview-pbx.dtsi @@ -390,7 +390,7 @@ compatible = "arm,pl022", "arm,primecell"; reg = <0x1000d000 0x1000>; clocks = <&sspclk>, <&pclk>; - clock-names = "SSPCLK", "apb_pclk"; + clock-names = "sspclk", "apb_pclk"; }; wdog0: watchdog@1000f000 { diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index 46e6d3ed8f35..9dc928859ad3 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -60,16 +60,26 @@ reg = <0x0800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 58>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 58>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie0_intc 0>, + <0 0 0 2 &pcie0_intc 1>, + <0 0 0 3 &pcie0_intc 2>, + <0 0 0 4 &pcie0_intc 3>; marvell,pcie-port = <0>; marvell,pcie-lane = <0>; clocks = <&gateclk 5>; status = "disabled"; + + pcie0_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; pcie2: pcie@2,0 { @@ -78,16 +88,26 @@ reg = <0x1000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 62>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 0x81000000 0 0 0x81000000 0x2 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 62>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie2_intc 0>, + <0 0 0 2 &pcie2_intc 1>, + <0 0 0 3 &pcie2_intc 2>, + <0 0 0 4 &pcie2_intc 3>; marvell,pcie-port = <1>; marvell,pcie-lane = <0>; clocks = <&gateclk 9>; status = "disabled"; + + pcie2_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; }; diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi index 7f2f24a29e6c..929deaf312a5 100644 --- a/arch/arm/boot/dts/armada-375.dtsi +++ b/arch/arm/boot/dts/armada-375.dtsi @@ -568,16 +568,26 @@ reg = <0x0800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie0_intc 0>, + <0 0 0 2 &pcie0_intc 1>, + <0 0 0 3 &pcie0_intc 2>, + <0 0 0 4 &pcie0_intc 3>; marvell,pcie-port = <0>; marvell,pcie-lane = <0>; clocks = <&gateclk 5>; status = "disabled"; + + pcie0_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; pcie1: pcie@2,0 { @@ -586,16 +596,26 @@ reg = <0x1000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 0x81000000 0 0 0x81000000 0x2 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie1_intc 0>, + <0 0 0 2 &pcie1_intc 1>, + <0 0 0 3 &pcie1_intc 2>, + <0 0 0 4 &pcie1_intc 3>; marvell,pcie-port = <0>; marvell,pcie-lane = <1>; clocks = <&gateclk 6>; status = "disabled"; + + pcie1_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; }; diff --git a/arch/arm/boot/dts/armada-380.dtsi b/arch/arm/boot/dts/armada-380.dtsi index cff1269f3fbf..ce1dddb2269b 100644 --- a/arch/arm/boot/dts/armada-380.dtsi +++ b/arch/arm/boot/dts/armada-380.dtsi @@ -64,16 +64,26 @@ reg = <0x0800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie1_intc 0>, + <0 0 0 2 &pcie1_intc 1>, + <0 0 0 3 &pcie1_intc 2>, + <0 0 0 4 &pcie1_intc 3>; marvell,pcie-port = <0>; marvell,pcie-lane = <0>; clocks = <&gateclk 8>; status = "disabled"; + + pcie1_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; /* x1 port */ @@ -83,16 +93,26 @@ reg = <0x1000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 0x81000000 0 0 0x81000000 0x2 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie2_intc 0>, + <0 0 0 2 &pcie2_intc 1>, + <0 0 0 3 &pcie2_intc 2>, + <0 0 0 4 &pcie2_intc 3>; marvell,pcie-port = <1>; marvell,pcie-lane = <0>; clocks = <&gateclk 5>; status = "disabled"; + + pcie2_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; /* x1 port */ @@ -102,16 +122,26 @@ reg = <0x1800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 0x81000000 0 0 0x81000000 0x3 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie3_intc 0>, + <0 0 0 2 &pcie3_intc 1>, + <0 0 0 3 &pcie3_intc 2>, + <0 0 0 4 &pcie3_intc 3>; marvell,pcie-port = <2>; marvell,pcie-lane = <0>; clocks = <&gateclk 6>; status = "disabled"; + + pcie3_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; }; }; diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts index d1e0db6e5730..72ac807cae25 100644 --- a/arch/arm/boot/dts/armada-385-turris-omnia.dts +++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts @@ -105,6 +105,33 @@ */ status = "disabled"; }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "SPDIF"; + simple-audio-card,format = "i2s"; + + simple-audio-card,cpu { + sound-dai = <&audio_controller 1>; + }; + + simple-audio-card,codec { + sound-dai = <&spdif_out>; + }; + }; + + spdif_out: spdif-out { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + }; +}; + +&audio_controller { + /* Pin header U16, GPIO51 in SPDIFO mode */ + pinctrl-0 = <&spdif_pins>; + pinctrl-names = "default"; + spdif-mode; + status = "okay"; }; &bm { @@ -166,6 +193,7 @@ buffer-manager = <&bm>; bm,pool-long = <2>; bm,pool-short = <3>; + label = "wan"; }; &i2c0 { @@ -476,7 +504,7 @@ marvell,function = "spi0"; }; - spi0cs1_pins: spi0cs1-pins { + spi0cs2_pins: spi0cs2-pins { marvell,pins = "mpp26"; marvell,function = "spi0"; }; @@ -511,7 +539,7 @@ }; }; - /* MISO, MOSI, SCLK and CS1 are routed to pin header CN11 */ + /* MISO, MOSI, SCLK and CS2 are routed to pin header CN11 */ }; &uart0 { diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts index 5130eccc32af..2bcec5419b66 100644 --- a/arch/arm/boot/dts/armada-388-db.dts +++ b/arch/arm/boot/dts/armada-388-db.dts @@ -36,6 +36,11 @@ i2c@11000 { status = "okay"; clock-frequency = <100000>; + audio_codec: audio-codec@4a { + #sound-dai-cells = <0>; + compatible = "cirrus,cs42l51"; + reg = <0x4a>; + }; }; i2c@11100 { @@ -99,6 +104,12 @@ no-1-8-v; }; + audio-controller@e8000 { + pinctrl-0 = <&i2s_pins>; + pinctrl-names = "default"; + status = "disabled"; + }; + usb3@f0000 { status = "okay"; }; @@ -128,6 +139,64 @@ }; }; }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "Armada 385 DB Audio"; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,widgets = + "Headphone", "Out Jack", + "Line", "In Jack"; + simple-audio-card,routing = + "Out Jack", "HPL", + "Out Jack", "HPR", + "AIN1L", "In Jack", + "AIN1R", "In Jack"; + status = "disabled"; + + simple-audio-card,dai-link@0 { + format = "i2s"; + cpu { + sound-dai = <&audio_controller 0>; + }; + + codec { + sound-dai = <&audio_codec>; + }; + }; + + simple-audio-card,dai-link@1 { + format = "i2s"; + cpu { + sound-dai = <&audio_controller 1>; + }; + + codec { + sound-dai = <&spdif_out>; + }; + }; + + simple-audio-card,dai-link@2 { + format = "i2s"; + cpu { + sound-dai = <&audio_controller 1>; + }; + + codec { + sound-dai = <&spdif_in>; + }; + }; + }; + + spdif_out: spdif-out { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + }; + + spdif_in: spdif-in { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dir"; + }; }; &spi0 { diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index df3c8d1d8f64..446861b6b17b 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -289,6 +289,18 @@ marvell,pins = "mpp44"; marvell,function = "sata3"; }; + + i2s_pins: i2s-pins { + marvell,pins = "mpp48", "mpp49", + "mpp50", "mpp51", + "mpp52", "mpp53"; + marvell,function = "audio"; + }; + + spdif_pins: spdif-pins { + marvell,pins = "mpp51"; + marvell,function = "audio"; + }; }; gpio0: gpio@18100 { @@ -298,6 +310,7 @@ reg-names = "gpio", "pwm"; ngpios = <32>; gpio-controller; + gpio-ranges = <&pinctrl 0 0 32>; #gpio-cells = <2>; #pwm-cells = <2>; interrupt-controller; @@ -316,6 +329,7 @@ reg-names = "gpio", "pwm"; ngpios = <28>; gpio-controller; + gpio-ranges = <&pinctrl 0 32 28>; #gpio-cells = <2>; #pwm-cells = <2>; interrupt-controller; @@ -618,6 +632,18 @@ status = "disabled"; }; + audio_controller: audio-controller@e8000 { + #sound-dai-cells = <1>; + compatible = "marvell,armada-380-audio"; + reg = <0xe8000 0x4000>, <0x18410 0xc>, + <0x18204 0x4>; + reg-names = "i2s_regs", "pll_regs", "soc_ctrl"; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gateclk 0>; + clock-names = "internal"; + status = "disabled"; + }; + usb3_0: usb3@f0000 { compatible = "marvell,armada-380-xhci"; reg = <0xf0000 0x4000>,<0xf4000 0x4000>; diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi index e0b7c2099831..923b035a3ab3 100644 --- a/arch/arm/boot/dts/armada-39x.dtsi +++ b/arch/arm/boot/dts/armada-39x.dtsi @@ -438,16 +438,26 @@ reg = <0x0800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie1_intc 0>, + <0 0 0 2 &pcie1_intc 1>, + <0 0 0 3 &pcie1_intc 2>, + <0 0 0 4 &pcie1_intc 3>; marvell,pcie-port = <0>; marvell,pcie-lane = <0>; clocks = <&gateclk 8>; status = "disabled"; + + pcie1_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; /* x1 port */ @@ -457,16 +467,26 @@ reg = <0x1000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 0x81000000 0 0 0x81000000 0x2 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie2_intc 0>, + <0 0 0 2 &pcie2_intc 1>, + <0 0 0 3 &pcie2_intc 2>, + <0 0 0 4 &pcie2_intc 3>; marvell,pcie-port = <1>; marvell,pcie-lane = <0>; clocks = <&gateclk 5>; status = "disabled"; + + pcie2_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; /* x1 port */ @@ -476,16 +496,26 @@ reg = <0x1800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 0x81000000 0 0 0x81000000 0x3 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie3_intc 0>, + <0 0 0 2 &pcie3_intc 1>, + <0 0 0 3 &pcie3_intc 2>, + <0 0 0 4 &pcie3_intc 3>; marvell,pcie-port = <2>; marvell,pcie-lane = <0>; clocks = <&gateclk 6>; status = "disabled"; + + pcie3_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; /* @@ -498,16 +528,26 @@ reg = <0x2000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 0x81000000 0 0 0x81000000 0x4 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie4_intc 0>, + <0 0 0 2 &pcie4_intc 1>, + <0 0 0 3 &pcie4_intc 2>, + <0 0 0 4 &pcie4_intc 3>; marvell,pcie-port = <3>; marvell,pcie-lane = <0>; clocks = <&gateclk 7>; status = "disabled"; + + pcie4_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi index 38a052a0312d..b21ffb819b1d 100644 --- a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi +++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi @@ -76,16 +76,26 @@ reg = <0x0800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 58>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 58>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie1_intc 0>, + <0 0 0 2 &pcie1_intc 1>, + <0 0 0 3 &pcie1_intc 2>, + <0 0 0 4 &pcie1_intc 3>; marvell,pcie-port = <0>; marvell,pcie-lane = <0>; clocks = <&gateclk 5>; status = "disabled"; + + pcie1_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts index 87dcb502f72d..0dad95ea26c2 100644 --- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts +++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts @@ -164,7 +164,7 @@ }; }; - spi3 { + spi-3 { compatible = "spi-gpio"; status = "okay"; gpio-sck = <&gpio0 25 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index 8558bf6bb54c..bf9360f41e0a 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -83,16 +83,26 @@ reg = <0x0800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 58>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 58>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie1_intc 0>, + <0 0 0 2 &pcie1_intc 1>, + <0 0 0 3 &pcie1_intc 2>, + <0 0 0 4 &pcie1_intc 3>; marvell,pcie-port = <0>; marvell,pcie-lane = <0>; clocks = <&gateclk 5>; status = "disabled"; + + pcie1_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; pcie2: pcie@2,0 { @@ -101,16 +111,26 @@ reg = <0x1000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 59>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 0x81000000 0 0 0x81000000 0x2 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 59>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie2_intc 0>, + <0 0 0 2 &pcie2_intc 1>, + <0 0 0 3 &pcie2_intc 2>, + <0 0 0 4 &pcie2_intc 3>; marvell,pcie-port = <0>; marvell,pcie-lane = <1>; clocks = <&gateclk 6>; status = "disabled"; + + pcie2_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; pcie3: pcie@3,0 { @@ -119,16 +139,26 @@ reg = <0x1800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 60>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 0x81000000 0 0 0x81000000 0x3 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 60>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie3_intc 0>, + <0 0 0 2 &pcie3_intc 1>, + <0 0 0 3 &pcie3_intc 2>, + <0 0 0 4 &pcie3_intc 3>; marvell,pcie-port = <0>; marvell,pcie-lane = <2>; clocks = <&gateclk 7>; status = "disabled"; + + pcie3_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; pcie4: pcie@4,0 { @@ -137,16 +167,26 @@ reg = <0x2000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 61>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 0x81000000 0 0 0x81000000 0x4 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 61>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie4_intc 0>, + <0 0 0 2 &pcie4_intc 1>, + <0 0 0 3 &pcie4_intc 2>, + <0 0 0 4 &pcie4_intc 3>; marvell,pcie-port = <0>; marvell,pcie-lane = <3>; clocks = <&gateclk 8>; status = "disabled"; + + pcie4_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; pcie5: pcie@5,0 { @@ -155,16 +195,26 @@ reg = <0x2800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 62>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0 0x81000000 0 0 0x81000000 0x5 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 62>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie5_intc 0>, + <0 0 0 2 &pcie5_intc 1>, + <0 0 0 3 &pcie5_intc 2>, + <0 0 0 4 &pcie5_intc 3>; marvell,pcie-port = <1>; marvell,pcie-lane = <0>; clocks = <&gateclk 9>; status = "disabled"; + + pcie5_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 2d85fe8ac327..0714af52e607 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -98,16 +98,26 @@ reg = <0x0800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 58>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 58>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie1_intc 0>, + <0 0 0 2 &pcie1_intc 1>, + <0 0 0 3 &pcie1_intc 2>, + <0 0 0 4 &pcie1_intc 3>; marvell,pcie-port = <0>; marvell,pcie-lane = <0>; clocks = <&gateclk 5>; status = "disabled"; + + pcie1_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; pcie2: pcie@2,0 { @@ -116,16 +126,26 @@ reg = <0x1000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 59>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 0x81000000 0 0 0x81000000 0x2 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 59>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie2_intc 0>, + <0 0 0 2 &pcie2_intc 1>, + <0 0 0 3 &pcie2_intc 2>, + <0 0 0 4 &pcie2_intc 3>; marvell,pcie-port = <0>; marvell,pcie-lane = <1>; clocks = <&gateclk 6>; status = "disabled"; + + pcie2_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; pcie3: pcie@3,0 { @@ -134,16 +154,26 @@ reg = <0x1800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 60>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 0x81000000 0 0 0x81000000 0x3 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 60>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie3_intc 0>, + <0 0 0 2 &pcie3_intc 1>, + <0 0 0 3 &pcie3_intc 2>, + <0 0 0 4 &pcie3_intc 3>; marvell,pcie-port = <0>; marvell,pcie-lane = <2>; clocks = <&gateclk 7>; status = "disabled"; + + pcie3_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; pcie4: pcie@4,0 { @@ -152,16 +182,26 @@ reg = <0x2000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 61>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 0x81000000 0 0 0x81000000 0x4 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 61>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie4_intc 0>, + <0 0 0 2 &pcie4_intc 1>, + <0 0 0 3 &pcie4_intc 2>, + <0 0 0 4 &pcie4_intc 3>; marvell,pcie-port = <0>; marvell,pcie-lane = <3>; clocks = <&gateclk 8>; status = "disabled"; + + pcie4_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; pcie5: pcie@5,0 { @@ -170,16 +210,26 @@ reg = <0x2800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 62>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0 0x81000000 0 0 0x81000000 0x5 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 62>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie5_intc 0>, + <0 0 0 2 &pcie5_intc 1>, + <0 0 0 3 &pcie5_intc 2>, + <0 0 0 4 &pcie5_intc 3>; marvell,pcie-port = <1>; marvell,pcie-lane = <0>; clocks = <&gateclk 9>; status = "disabled"; + + pcie5_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; pcie6: pcie@6,0 { @@ -188,16 +238,26 @@ reg = <0x3000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 63>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0 0x81000000 0 0 0x81000000 0x6 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 63>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie6_intc 0>, + <0 0 0 2 &pcie6_intc 1>, + <0 0 0 3 &pcie6_intc 2>, + <0 0 0 4 &pcie6_intc 3>; marvell,pcie-port = <1>; marvell,pcie-lane = <1>; clocks = <&gateclk 10>; status = "disabled"; + + pcie6_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; pcie7: pcie@7,0 { @@ -206,16 +266,26 @@ reg = <0x3800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 64>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0 0x81000000 0 0 0x81000000 0x7 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 64>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie7_intc 0>, + <0 0 0 2 &pcie7_intc 1>, + <0 0 0 3 &pcie7_intc 2>, + <0 0 0 4 &pcie7_intc 3>; marvell,pcie-port = <1>; marvell,pcie-lane = <2>; clocks = <&gateclk 11>; status = "disabled"; + + pcie7_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; pcie8: pcie@8,0 { @@ -224,16 +294,26 @@ reg = <0x4000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 65>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0 0x81000000 0 0 0x81000000 0x8 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 65>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie8_intc 0>, + <0 0 0 2 &pcie8_intc 1>, + <0 0 0 3 &pcie8_intc 2>, + <0 0 0 4 &pcie8_intc 3>; marvell,pcie-port = <1>; marvell,pcie-lane = <3>; clocks = <&gateclk 12>; status = "disabled"; + + pcie8_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; pcie9: pcie@9,0 { @@ -242,16 +322,26 @@ reg = <0x4800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 99>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0 0x81000000 0 0 0x81000000 0x9 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 99>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie9_intc 0>, + <0 0 0 2 &pcie9_intc 1>, + <0 0 0 3 &pcie9_intc 2>, + <0 0 0 4 &pcie9_intc 3>; marvell,pcie-port = <2>; marvell,pcie-lane = <0>; clocks = <&gateclk 26>; status = "disabled"; + + pcie9_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi index 230a3fd36b30..16185edf9aa5 100644 --- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi @@ -119,16 +119,26 @@ reg = <0x0800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 58>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 58>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie1_intc 0>, + <0 0 0 2 &pcie1_intc 1>, + <0 0 0 3 &pcie1_intc 2>, + <0 0 0 4 &pcie1_intc 3>; marvell,pcie-port = <0>; marvell,pcie-lane = <0>; clocks = <&gateclk 5>; status = "disabled"; + + pcie1_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; pcie2: pcie@2,0 { @@ -137,16 +147,26 @@ reg = <0x1000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 59>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 0x81000000 0 0 0x81000000 0x2 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 59>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie2_intc 0>, + <0 0 0 2 &pcie2_intc 1>, + <0 0 0 3 &pcie2_intc 2>, + <0 0 0 4 &pcie2_intc 3>; marvell,pcie-port = <0>; marvell,pcie-lane = <1>; clocks = <&gateclk 6>; status = "disabled"; + + pcie2_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; pcie3: pcie@3,0 { @@ -155,16 +175,26 @@ reg = <0x1800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 60>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 0x81000000 0 0 0x81000000 0x3 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 60>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie3_intc 0>, + <0 0 0 2 &pcie3_intc 1>, + <0 0 0 3 &pcie3_intc 2>, + <0 0 0 4 &pcie3_intc 3>; marvell,pcie-port = <0>; marvell,pcie-lane = <2>; clocks = <&gateclk 7>; status = "disabled"; + + pcie3_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; pcie4: pcie@4,0 { @@ -173,16 +203,26 @@ reg = <0x2000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 61>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 0x81000000 0 0 0x81000000 0x4 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 61>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie4_intc 0>, + <0 0 0 2 &pcie4_intc 1>, + <0 0 0 3 &pcie4_intc 2>, + <0 0 0 4 &pcie4_intc 3>; marvell,pcie-port = <0>; marvell,pcie-lane = <3>; clocks = <&gateclk 8>; status = "disabled"; + + pcie4_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; pcie5: pcie@5,0 { @@ -191,16 +231,26 @@ reg = <0x2800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 62>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0 0x81000000 0 0 0x81000000 0x5 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 62>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie5_intc 0>, + <0 0 0 2 &pcie5_intc 1>, + <0 0 0 3 &pcie5_intc 2>, + <0 0 0 4 &pcie5_intc 3>; marvell,pcie-port = <1>; marvell,pcie-lane = <0>; clocks = <&gateclk 9>; status = "disabled"; + + pcie5_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; pcie6: pcie@6,0 { @@ -209,16 +259,26 @@ reg = <0x3000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 63>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0 0x81000000 0 0 0x81000000 0x6 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 63>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie6_intc 0>, + <0 0 0 2 &pcie6_intc 1>, + <0 0 0 3 &pcie6_intc 2>, + <0 0 0 4 &pcie6_intc 3>; marvell,pcie-port = <1>; marvell,pcie-lane = <1>; clocks = <&gateclk 10>; status = "disabled"; + + pcie6_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; pcie7: pcie@7,0 { @@ -227,16 +287,26 @@ reg = <0x3800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 64>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0 0x81000000 0 0 0x81000000 0x7 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 64>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie7_intc 0>, + <0 0 0 2 &pcie7_intc 1>, + <0 0 0 3 &pcie7_intc 2>, + <0 0 0 4 &pcie7_intc 3>; marvell,pcie-port = <1>; marvell,pcie-lane = <2>; clocks = <&gateclk 11>; status = "disabled"; + + pcie7_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; pcie8: pcie@8,0 { @@ -245,16 +315,26 @@ reg = <0x4000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 65>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0 0x81000000 0 0 0x81000000 0x8 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 65>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie8_intc 0>, + <0 0 0 2 &pcie8_intc 1>, + <0 0 0 3 &pcie8_intc 2>, + <0 0 0 4 &pcie8_intc 3>; marvell,pcie-port = <1>; marvell,pcie-lane = <3>; clocks = <&gateclk 12>; status = "disabled"; + + pcie8_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; pcie9: pcie@9,0 { @@ -263,16 +343,26 @@ reg = <0x4800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 99>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0 0x81000000 0 0 0x81000000 0x9 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 99>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie9_intc 0>, + <0 0 0 2 &pcie9_intc 1>, + <0 0 0 3 &pcie9_intc 2>, + <0 0 0 4 &pcie9_intc 3>; marvell,pcie-port = <2>; marvell,pcie-lane = <0>; clocks = <&gateclk 26>; status = "disabled"; + + pcie9_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; pcie10: pcie@a,0 { @@ -281,16 +371,26 @@ reg = <0x5000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 103>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0 0x81000000 0 0 0x81000000 0xa 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 103>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie10_intc 0>, + <0 0 0 2 &pcie10_intc 1>, + <0 0 0 3 &pcie10_intc 2>, + <0 0 0 4 &pcie10_intc 3>; marvell,pcie-port = <3>; marvell,pcie-lane = <0>; clocks = <&gateclk 27>; status = "disabled"; + + pcie10_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; }; diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb-a1.dts b/arch/arm/boot/dts/aspeed-ast2600-evb-a1.dts index d0a5c2ff0fec..f34a2b1ec2f0 100644 --- a/arch/arm/boot/dts/aspeed-ast2600-evb-a1.dts +++ b/arch/arm/boot/dts/aspeed-ast2600-evb-a1.dts @@ -5,7 +5,7 @@ / { model = "AST2600 A1 EVB"; - compatible = "aspeed,ast2600-evb-a1", "aspeed,ast2600"; + compatible = "aspeed,ast2600-evb-a1", "aspeed,ast2600-evb", "aspeed,ast2600"; /delete-node/regulator-vcc-sdhci0; /delete-node/regulator-vcc-sdhci1; diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed-ast2600-evb.dts index c698e6538269..de83c0eb1d6e 100644 --- a/arch/arm/boot/dts/aspeed-ast2600-evb.dts +++ b/arch/arm/boot/dts/aspeed-ast2600-evb.dts @@ -8,7 +8,7 @@ / { model = "AST2600 EVB"; - compatible = "aspeed,ast2600-evb-a1", "aspeed,ast2600"; + compatible = "aspeed,ast2600-evb", "aspeed,ast2600"; aliases { serial4 = &uart5; @@ -182,6 +182,7 @@ status = "okay"; m25p,fast-read; label = "bmc"; + spi-rx-bus-width = <4>; spi-max-frequency = <50000000>; #include "openbmc-flash-layout-64.dtsi" }; @@ -196,6 +197,7 @@ status = "okay"; m25p,fast-read; label = "pnor"; + spi-rx-bus-width = <4>; spi-max-frequency = <100000000>; }; }; @@ -207,11 +209,6 @@ &i2c0 { status = "okay"; - - temp@2e { - compatible = "adi,adt7490"; - reg = <0x2e>; - }; }; &i2c1 { @@ -240,10 +237,26 @@ &i2c7 { status = "okay"; + + temp@2e { + compatible = "adi,adt7490"; + reg = <0x2e>; + }; + + eeprom@50 { + compatible = "atmel,24c08"; + reg = <0x50>; + pagesize = <16>; + }; }; &i2c8 { status = "okay"; + + lm75@4d { + compatible = "national,lm75"; + reg = <0x4d>; + }; }; &i2c9 { diff --git a/arch/arm/boot/dts/aspeed-bmc-amd-daytonax.dts b/arch/arm/boot/dts/aspeed-bmc-amd-daytonax.dts new file mode 100644 index 000000000000..64bb9bf92de2 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-amd-daytonax.dts @@ -0,0 +1,319 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "AMD DaytonaX BMC"; + compatible = "amd,daytonax-bmc", "aspeed,ast2500"; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + video_engine_memory: jpegbuffer { + size = <0x02000000>; /* 32M */ + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + + aliases { + serial0 = &uart1; + serial4 = &uart5; + }; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200"; + }; + + leds { + compatible = "gpio-leds"; + + led-fault { + gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>; + }; + + led-identify { + gpios = <&gpio ASPEED_GPIO(A, 3) GPIO_ACTIVE_LOW>; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>, + <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>, + <&adc 10>, <&adc 11>, <&adc 12>, <&adc 13>, <&adc 14>, + <&adc 15>; + }; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + #include "openbmc-flash-layout.dtsi" + }; +}; + +&mac0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>; +}; + +&uart1 { + //Host Console + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default + &pinctrl_nrts1_default + &pinctrl_ndtr1_default + &pinctrl_ndsr1_default + &pinctrl_ncts1_default + &pinctrl_ndcd1_default + &pinctrl_nri1_default>; +}; + +&uart5 { + //BMC Console + status = "okay"; +}; + +&vuart { + status = "okay"; + aspeed,lpc-io-reg = <0x3f8>; + aspeed,lpc-interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; +}; + +&adc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default + &pinctrl_adc1_default + &pinctrl_adc2_default + &pinctrl_adc3_default + &pinctrl_adc4_default + &pinctrl_adc5_default + &pinctrl_adc6_default + &pinctrl_adc7_default + &pinctrl_adc8_default + &pinctrl_adc9_default + &pinctrl_adc10_default + &pinctrl_adc11_default + &pinctrl_adc12_default + &pinctrl_adc13_default + &pinctrl_adc14_default + &pinctrl_adc15_default>; +}; + +&gpio { + status = "okay"; + gpio-line-names = + /*A0-A7*/ "","","led-fault","led-identify","","","","", + /*B0-B7*/ "","","","","","","","", + /*C0-C7*/ "id-button","","","","","","","", + /*D0-D7*/ "","","ASSERT_BMC_READY","","","","","", + /*E0-E7*/ "reset-button","reset-control","power-button","power-control","", + "power-good","power-ok","", + /*F0-F7*/ "","","","","","","BATTERY_DETECT","", + /*G0-G7*/ "","","","","","","","", + /*H0-H7*/ "","","","","","","","", + /*I0-I7*/ "","","","","","","","", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "","","","","","","","", + /*O0-O7*/ "","","","","","","","", + /*P0-P7*/ "","","","","","","","", + /*Q0-Q7*/ "","","","","","","","", + /*R0-R7*/ "","","","","","","","", + /*S0-S7*/ "","","","","","","","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","","","","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z7*/ "","","","","","","","", + /*AA0-AA7*/ "","","","","","","","", + /*AB0-AB7*/ "FM_BMC_READ_SPD_TEMP","","","","","","","", + /*AC0-AC7*/ "","","","","","","",""; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c8 { + status = "okay"; +}; + +&i2c10 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; +}; + +&i2c12 { + status = "okay"; +}; + +&kcs3 { + status = "okay"; + aspeed,lpc-io-reg = <0xca2>; +}; + +&lpc_snoop { + status = "okay"; + snoop-ports = <0x80>, <0x81>; +}; + +&lpc_ctrl { + status = "okay"; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default + &pinctrl_pwm1_default + &pinctrl_pwm2_default + &pinctrl_pwm3_default + &pinctrl_pwm4_default + &pinctrl_pwm5_default + &pinctrl_pwm6_default + &pinctrl_pwm7_default>; + + fan@0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00>; + }; + + fan@1 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x01>; + }; + + fan@2 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x02>; + }; + + fan@3 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x03>; + }; + + fan@4 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x04>; + }; + + fan@5 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x05>; + }; + + fan@6 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x06>; + }; + + fan@7 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x07>; + }; + + fan@8 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x08>; + }; + + fan@9 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x09>; + }; + + fan@10 { + reg = <0x05>; + aspeed,fan-tach-ch = /bits/ 8 <0x0a>; + }; + + fan@11 { + reg = <0x05>; + aspeed,fan-tach-ch = /bits/ 8 <0x0b>; + }; + + fan@12 { + reg = <0x06>; + aspeed,fan-tach-ch = /bits/ 8 <0x0c>; + }; + + fan@13 { + reg = <0x06>; + aspeed,fan-tach-ch = /bits/ 8 <0x0d>; + }; + + fan@14 { + reg = <0x07>; + aspeed,fan-tach-ch = /bits/ 8 <0x0e>; + }; + + fan@15 { + reg = <0x07>; + aspeed,fan-tach-ch = /bits/ 8 <0x0f>; + }; +}; + +&video { + status = "okay"; + memory-region = <&video_engine_memory>; +}; + +&vhub { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts index 82a6f14a45f0..d127cbcc7998 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts @@ -97,101 +97,6 @@ }; }; - gpio-keys { - compatible = "gpio-keys"; - - event-shutdown-ack { - label = "SHUTDOWN_ACK"; - gpios = <&gpio ASPEED_GPIO(G, 2) GPIO_ACTIVE_LOW>; - linux,code = <ASPEED_GPIO(G, 2)>; - }; - - event-reboot-ack { - label = "REBOOT_ACK"; - gpios = <&gpio ASPEED_GPIO(J, 3) GPIO_ACTIVE_LOW>; - linux,code = <ASPEED_GPIO(J, 3)>; - }; - - event-s0-overtemp { - label = "S0_OVERTEMP"; - gpios = <&gpio ASPEED_GPIO(G, 3) GPIO_ACTIVE_LOW>; - linux,code = <ASPEED_GPIO(G, 3)>; - }; - - event-s0-hightemp { - label = "S0_HIGHTEMP"; - gpios = <&gpio ASPEED_GPIO(J, 0) GPIO_ACTIVE_LOW>; - linux,code = <ASPEED_GPIO(J, 0)>; - }; - - event-s0-cpu-fault { - label = "S0_CPU_FAULT"; - gpios = <&gpio ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>; - linux,code = <ASPEED_GPIO(J, 1)>; - }; - - event-s0-scp-auth-fail { - label = "S0_SCP_AUTH_FAIL"; - gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>; - linux,code = <ASPEED_GPIO(J, 2)>; - }; - - event-s1-scp-auth-fail { - label = "S1_SCP_AUTH_FAIL"; - gpios = <&gpio ASPEED_GPIO(Z, 5) GPIO_ACTIVE_LOW>; - linux,code = <ASPEED_GPIO(Z, 5)>; - }; - - event-s1-overtemp { - label = "S1_OVERTEMP"; - gpios = <&gpio ASPEED_GPIO(Z, 6) GPIO_ACTIVE_LOW>; - linux,code = <ASPEED_GPIO(Z, 6)>; - }; - - event-s1-hightemp { - label = "S1_HIGHTEMP"; - gpios = <&gpio ASPEED_GPIO(AB, 0) GPIO_ACTIVE_LOW>; - linux,code = <ASPEED_GPIO(AB, 0)>; - }; - - event-s1-cpu-fault { - label = "S1_CPU_FAULT"; - gpios = <&gpio ASPEED_GPIO(Z, 1) GPIO_ACTIVE_HIGH>; - linux,code = <ASPEED_GPIO(Z, 1)>; - }; - - event-id { - label = "ID_BUTTON"; - gpios = <&gpio ASPEED_GPIO(Q, 5) GPIO_ACTIVE_LOW>; - linux,code = <ASPEED_GPIO(Q, 5)>; - }; - - event-psu1-vin-good { - label = "PSU1_VIN_GOOD"; - gpios = <&gpio ASPEED_GPIO(H, 4) GPIO_ACTIVE_LOW>; - linux,code = <ASPEED_GPIO(H, 4)>; - }; - - event-psu2-vin-good { - label = "PSU2_VIN_GOOD"; - gpios = <&gpio ASPEED_GPIO(H, 5) GPIO_ACTIVE_LOW>; - linux,code = <ASPEED_GPIO(H, 5)>; - }; - - event-psu1-present { - label = "PSU1_PRESENT"; - gpios = <&gpio ASPEED_GPIO(I, 0) GPIO_ACTIVE_LOW>; - linux,code = <ASPEED_GPIO(I, 0)>; - }; - - event-psu2-present { - label = "PSU2_PRESENT"; - gpios = <&gpio ASPEED_GPIO(I, 1) GPIO_ACTIVE_LOW>; - linux,code = <ASPEED_GPIO(I, 1)>; - }; - - }; - gpioA0mux: mux-controller { compatible = "gpio-mux"; #mux-control-cells = <0>; diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts new file mode 100644 index 000000000000..606cd4be245a --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts @@ -0,0 +1,546 @@ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright (c) 2022, Ampere Computing LLC + +/dts-v1/; + +#include "aspeed-g6.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> + +/ { + model = "Ampere Mt.Mitchell BMC"; + compatible = "ampere,mtmitchell-bmc", "aspeed,ast2600"; + + chosen { + stdout-path = &uart5; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + + video_engine_memory: video { + size = <0x04000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + + vga_memory: region@bf000000 { + no-map; + compatible = "shared-dma-pool"; + reg = <0xbf000000 0x01000000>; /* 16M */ + }; + }; + + voltage_mon_reg: voltage-mon-regulator { + compatible = "regulator-fixed"; + regulator-name = "ltc2497_reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + gpioI5mux: mux-controller { + compatible = "gpio-mux"; + #mux-control-cells = <0>; + mux-gpios = <&gpio0 ASPEED_GPIO(I, 5) GPIO_ACTIVE_HIGH>; + }; + + adc0mux: adc0mux { + compatible = "io-channel-mux"; + io-channels = <&adc0 0>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioI5mux>; + channels = "s0", "s1"; + }; + + adc1mux: adc1mux { + compatible = "io-channel-mux"; + io-channels = <&adc0 1>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioI5mux>; + channels = "s0", "s1"; + }; + + adc2mux: adc2mux { + compatible = "io-channel-mux"; + io-channels = <&adc0 2>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioI5mux>; + channels = "s0", "s1"; + }; + + adc3mux: adc3mux { + compatible = "io-channel-mux"; + io-channels = <&adc0 3>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioI5mux>; + channels = "s0", "s1"; + }; + + adc4mux: adc4mux { + compatible = "io-channel-mux"; + io-channels = <&adc0 4>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioI5mux>; + channels = "s0", "s1"; + }; + + adc5mux: adc5mux { + compatible = "io-channel-mux"; + io-channels = <&adc0 5>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioI5mux>; + channels = "s0", "s1"; + }; + + adc6mux: adc6mux { + compatible = "io-channel-mux"; + io-channels = <&adc0 6>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioI5mux>; + channels = "s0", "s1"; + }; + + adc7mux: adc7mux { + compatible = "io-channel-mux"; + io-channels = <&adc0 7>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioI5mux>; + channels = "s0", "s1"; + }; + + adc8mux: adc8mux { + compatible = "io-channel-mux"; + io-channels = <&adc1 0>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioI5mux>; + channels = "s0", "s1"; + }; + + adc9mux: adc9mux { + compatible = "io-channel-mux"; + io-channels = <&adc1 1>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioI5mux>; + channels = "s0", "s1"; + }; + + adc10mux: adc10mux { + compatible = "io-channel-mux"; + io-channels = <&adc1 2>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioI5mux>; + channels = "s0", "s1"; + }; + + adc11mux: adc11mux { + compatible = "io-channel-mux"; + io-channels = <&adc1 3>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioI5mux>; + channels = "s0", "s1"; + }; + + adc12mux: adc12mux { + compatible = "io-channel-mux"; + io-channels = <&adc1 4>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioI5mux>; + channels = "s0", "s1"; + }; + + adc13mux: adc13mux { + compatible = "io-channel-mux"; + io-channels = <&adc1 5>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioI5mux>; + channels = "s0", "s1"; + }; + + adc14mux: adc14mux { + compatible = "io-channel-mux"; + io-channels = <&adc1 6>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioI5mux>; + channels = "s0", "s1"; + }; + + adc15mux: adc15mux { + compatible = "io-channel-mux"; + io-channels = <&adc1 7>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioI5mux>; + channels = "s0", "s1"; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc0mux 0>, <&adc0mux 1>, + <&adc1mux 0>, <&adc1mux 1>, + <&adc2mux 0>, <&adc2mux 1>, + <&adc3mux 0>, <&adc3mux 1>, + <&adc4mux 0>, <&adc4mux 1>, + <&adc5mux 0>, <&adc5mux 1>, + <&adc6mux 0>, <&adc6mux 1>, + <&adc7mux 0>, <&adc7mux 1>, + <&adc8mux 0>, <&adc8mux 1>, + <&adc9mux 0>, <&adc9mux 1>, + <&adc10mux 0>, <&adc10mux 1>, + <&adc11mux 0>, <&adc11mux 1>, + <&adc12mux 0>, <&adc12mux 1>, + <&adc13mux 0>, <&adc13mux 1>, + <&adc14mux 0>, <&adc14mux 1>, + <&adc15mux 0>, <&adc15mux 1>, + <&adc_i2c 0>, <&adc_i2c 1>, + <&adc_i2c 2>, <&adc_i2c 3>, + <&adc_i2c 4>, <&adc_i2c 5>, + <&adc_i2c 6>, <&adc_i2c 7>, + <&adc_i2c 8>, <&adc_i2c 9>, + <&adc_i2c 10>, <&adc_i2c 11>, + <&adc_i2c 12>, <&adc_i2c 13>, + <&adc_i2c 14>, <&adc_i2c 15>; + }; +}; + +&mdio0 { + status = "okay"; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; +}; + +&mac0 { + status = "okay"; + + phy-mode = "rgmii"; + phy-handle = <ðphy0>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii1_default>; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout-64.dtsi" + }; + + flash@1 { + status = "okay"; + m25p,fast-read; + label = "alt-bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout-64-alt.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + spi-max-frequency = <20000000>; + }; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + temperature-sensor@2e { + compatible = "adi,adt7490"; + reg = <0x2e>; + }; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; + + psu@58 { + compatible = "pmbus"; + reg = <0x58>; + }; + + psu@59 { + compatible = "pmbus"; + reg = <0x59>; + }; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; + + adc_i2c: adc@16 { + compatible = "lltc,ltc2497"; + reg = <0x16>; + vref-supply = <&voltage_mon_reg>; + #io-channel-cells = <1>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + }; + + i2c-mux@70 { + compatible = "nxp,pca9545"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + i2c-mux-idle-disconnect; + + i2c4_bus70_chn0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + + outlet_temp1: temperature-sensor@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; + psu1_inlet_temp2: temperature-sensor@49 { + compatible = "ti,tmp75"; + reg = <0x49>; + }; + }; + + i2c4_bus70_chn1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; + + pcie_zone_temp1: temperature-sensor@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; + psu0_inlet_temp2: temperature-sensor@49 { + compatible = "ti,tmp75"; + reg = <0x49>; + }; + }; + + i2c4_bus70_chn2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + pcie_zone_temp2: temperature-sensor@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; + outlet_temp2: temperature-sensor@49 { + compatible = "ti,tmp75"; + reg = <0x49>; + }; + }; + + i2c4_bus70_chn3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + mb_inlet_temp1: temperature-sensor@7c { + compatible = "microchip,emc1413"; + reg = <0x7c>; + }; + mb_inlet_temp2: temperature-sensor@4c { + compatible = "microchip,emc1413"; + reg = <0x4c>; + }; + }; + }; +}; + +&i2c5 { + status = "okay"; + + i2c-mux@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + i2c-mux-idle-disconnect; + }; +}; + +&i2c6 { + status = "okay"; + rtc@51 { + compatible = "nxp,pcf85063a"; + reg = <0x51>; + }; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c9 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; +}; + +&i2c14 { + status = "okay"; + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + }; + + bmc_ast2600_cpu: temperature-sensor@35 { + compatible = "ti,tmp175"; + reg = <0x35>; + }; +}; + +&adc0 { + ref_voltage = <2500>; + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default + &pinctrl_adc2_default &pinctrl_adc3_default + &pinctrl_adc4_default &pinctrl_adc5_default + &pinctrl_adc6_default &pinctrl_adc7_default>; +}; + +&adc1 { + ref_voltage = <2500>; + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default + &pinctrl_adc10_default &pinctrl_adc11_default + &pinctrl_adc12_default &pinctrl_adc13_default + &pinctrl_adc14_default &pinctrl_adc15_default>; +}; + +&vhub { + status = "okay"; +}; + +&video { + status = "okay"; + memory-region = <&video_engine_memory>; +}; + +&gpio0 { + gpio-line-names = + /*A0-A7*/ "","","","","","i2c2-reset-n","i2c6-reset-n","i2c4-reset-n", + /*B0-B7*/ "","","","","host0-sysreset-n","host0-pmin-n","","", + /*C0-C7*/ "s0-vrd-fault-n","s1-vrd-fault-n","","", + "irq-n","","vrd-sel","spd-sel", + /*D0-D7*/ "presence-ps0","presence-ps1","hsc-12vmain-alt2-n","ext-high-temp-n", + "","bmc-ncsi-txen","","", + /*E0-E7*/ "","","clk50m-bmc-ncsi","","","","","", + /*F0-F7*/ "s0-pcp-oc-warn-n","s1-pcp-oc-warn-n","power-chassis-control", + "cpu-bios-recover","s0-heartbeat","hs-csout-prochot", + "s0-vr-hot-n","s1-vr-hot-n", + /*G0-G7*/ "","","hsc-12vmain-alt1-n","","","","","", + /*H0-H7*/ "","","wd-disable-n","power-chassis-good","","","","", + /*I0-I7*/ "","","","","","adc-sw","power-button","rtc-battery-voltage-read-enable", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "","s0-ddr-save","soc-spi-nor-access","presence-cpu0", + "s0-rtc-lock","","","", + /*N0-N7*/ "hpm-fw-recovery","hpm-stby-rst-n","jtag-sel-s0","led-sw-hb", + "jtag-dbgr-prsnt-n","s1-heartbeat","","", + /*O0-O7*/ "","","","","","","","", + /*P0-P7*/ "ps0-ac-loss-n","ps1-ac-loss-n","","", + "led-fault","cpld-user-mode","jtag-srst-n","led-bmc-hb", + /*Q0-Q7*/ "","","","","","","","", + /*R0-R7*/ "","","","","","","","", + /*S0-S7*/ "","","identify-button","led-identify", + "s1-ddr-save","spi-nor-access","sys-pgood","presence-cpu1", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "s0-hightemp-n","s0-fault-alert","s0-sys-auth-failure-n", + "host0-reboot-ack-n","host0-ready","host0-shd-req-n", + "host0-shd-ack-n","s0-overtemp-n", + /*W0-W7*/ "ocp-aux-pwren","ocp-main-pwren","ocp-pgood","", + "bmc-ok","bmc-ready","spi0-program-sel","spi0-backup-sel", + /*X0-X7*/ "i2c-backup-sel","s1-fault-alert","s1-fw-boot-ok", + "s1-hightemp-n","s0-spi-auth-fail-n","s1-sys-auth-failure-n", + "s1-overtemp-n","s1-spi-auth-fail-n", + /*Y0-Y7*/ "","","","","","","","host0-special-boot", + /*Z0-Z7*/ "reset-button","ps0-pgood","ps1-pgood","","","","",""; +}; + +&gpio1 { + gpio-line-names = + /*18A0-18A7*/ "","","","","","","","", + /*18B0-18B7*/ "","","","","","","s0-soc-pgood","", + /*18C0-18C7*/ "uart1-mode0","uart1-mode1","uart2-mode0","uart2-mode1", + "uart3-mode0","uart3-mode1","uart4-mode0","uart4-mode1", + /*18D0-18D7*/ "","","","","","","","", + /*18E0-18E3*/ "","","",""; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts index 41d2b1535d9a..1fc3e7cbf0d1 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts @@ -7,6 +7,7 @@ #include <dt-bindings/usb/pd.h> #include <dt-bindings/leds/leds-pca955x.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/i2c/i2c.h> / { model = "Facebook Bletchley BMC"; @@ -792,11 +793,6 @@ reg = <0x4f>; }; - hdc1080@40 { - compatible = "ti,hdc1080"; - reg = <0x40>; - }; - front_leds: pca9552@67 { compatible = "nxp,pca9552"; reg = <0x67>; @@ -857,6 +853,13 @@ multi-master; aspeed,hw-timeout-ms = <1000>; status = "okay"; + + //USB Debug Connector + ipmb13@10 { + compatible = "ipmb-dev"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + i2c-protocol; + }; }; &gpio0 { diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-elbert.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-elbert.dts index 27b43fe099f1..8e1a1d1b282d 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-elbert.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-elbert.dts @@ -183,3 +183,21 @@ &i2c11 { status = "okay"; }; + +/* + * BMC's "mac3" controller is connected to BCM53134P's IMP_RGMII port + * directly (fixed link, no PHY in between). + * Note: BMC's "mdio0" controller is connected to BCM53134P's MDIO + * interface, and the MDIO channel will be enabled in dts later, when + * BCM53134 is added to "bcm53xx" DSA driver. + */ +&mac3 { + status = "okay"; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii4_default>; + fixed-link { + speed = <1000>; + full-duplex; + }; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts index 8864e9c312a8..6bf2ff85a40e 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts @@ -207,11 +207,16 @@ &i2c12 { status = "okay"; - //MEZZ_FRU - eeprom@51 { - compatible = "atmel,24c64"; - reg = <0x51>; - pagesize = <32>; +}; + +&i2c13 { + status = "okay"; + // Debug Card + multi-master; + ipmb13@10 { + compatible = "ipmb-dev"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + i2c-protocol; }; }; diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi index 6660564855ff..1387a763a6a5 100644 --- a/arch/arm/boot/dts/aspeed-g6.dtsi +++ b/arch/arm/boot/dts/aspeed-g6.dtsi @@ -756,6 +756,62 @@ status = "disabled"; }; + uart6: serial@1e790000 { + compatible = "ns16550a"; + reg = <0x1e790000 0x20>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_UART6CLK>; + no-loopback-test; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart6_default>; + + status = "disabled"; + }; + + uart7: serial@1e790100 { + compatible = "ns16550a"; + reg = <0x1e790100 0x20>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_UART7CLK>; + no-loopback-test; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart7_default>; + + status = "disabled"; + }; + + uart8: serial@1e790200 { + compatible = "ns16550a"; + reg = <0x1e790200 0x20>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_UART8CLK>; + no-loopback-test; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart8_default>; + + status = "disabled"; + }; + + uart9: serial@1e790300 { + compatible = "ns16550a"; + reg = <0x1e790300 0x20>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_UART9CLK>; + no-loopback-test; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart9_default>; + + status = "disabled"; + }; + i2c: bus@1e78a000 { compatible = "simple-bus"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts index 81c38e101f58..4ba52ba11dc6 100644 --- a/arch/arm/boot/dts/at91-sam9x60ek.dts +++ b/arch/arm/boot/dts/at91-sam9x60ek.dts @@ -34,48 +34,6 @@ }; }; - regulators: regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - vdd_1v8: fixed-regulator-vdd_1v8@0 { - compatible = "regulator-fixed"; - regulator-name = "VDD_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - status = "okay"; - }; - - vdd_1v15: fixed-regulator-vdd_1v15@1 { - compatible = "regulator-fixed"; - regulator-name = "VDD_1V15"; - regulator-min-microvolt = <1150000>; - regulator-max-microvolt = <1150000>; - regulator-always-on; - status = "okay"; - }; - - vdd1_3v3: fixed-regulator-vdd1_3v3@2 { - compatible = "regulator-fixed"; - regulator-name = "VDD1_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - status = "okay"; - }; - - vdd2_3v3: regulator-fixed-vdd2_3v3@3 { - compatible = "regulator-fixed"; - regulator-name = "VDD2_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - status = "okay"; - }; - }; - gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -111,6 +69,42 @@ linux,default-trigger = "heartbeat"; }; }; + + vdd_1v8: fixed-regulator-vdd_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + status = "okay"; + }; + + vdd_1v15: fixed-regulator-vdd_1v15 { + compatible = "regulator-fixed"; + regulator-name = "VDD_1V15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + regulator-always-on; + status = "okay"; + }; + + vdd1_3v3: fixed-regulator-vdd1_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDD1_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + status = "okay"; + }; + + vdd2_3v3: regulator-fixed-vdd2_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDD2_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + status = "okay"; + }; }; &adc { @@ -264,8 +258,9 @@ status = "okay"; uart1: serial@200 { - compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; + compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0x200 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi index 76b2025c67b4..83bcf9fe0152 100644 --- a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi +++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi @@ -76,8 +76,8 @@ regulators { vdd_3v3: VDD_IO { regulator-name = "VDD_IO"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3700000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-always-on; @@ -95,8 +95,8 @@ vddio_ddr: VDD_DDR { regulator-name = "VDD_DDR"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1850000>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-always-on; @@ -118,8 +118,8 @@ vdd_core: VDD_CORE { regulator-name = "VDD_CORE"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1850000>; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-always-on; @@ -160,8 +160,8 @@ LDO1 { regulator-name = "LDO1"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3700000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-always-on; regulator-state-standby { @@ -175,9 +175,8 @@ LDO2 { regulator-name = "LDO2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3700000>; - regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; regulator-state-standby { regulator-on-in-suspend; diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts index 6865be8d7787..dd1dec9d4e07 100644 --- a/arch/arm/boot/dts/at91-sama5d2_icp.dts +++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts @@ -196,8 +196,8 @@ regulators { vdd_io_reg: VDD_IO { regulator-name = "VDD_IO"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3700000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-always-on; @@ -215,8 +215,8 @@ VDD_DDR { regulator-name = "VDD_DDR"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1850000>; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-always-on; @@ -234,8 +234,8 @@ VDD_CORE { regulator-name = "VDD_CORE"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1850000>; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-always-on; @@ -257,7 +257,6 @@ regulator-max-microvolt = <1850000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; - regulator-always-on; regulator-state-standby { regulator-on-in-suspend; @@ -272,8 +271,8 @@ LDO1 { regulator-name = "LDO1"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3700000>; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; regulator-always-on; regulator-state-standby { @@ -287,8 +286,8 @@ LDO2 { regulator-name = "LDO2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3700000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-always-on; regulator-state-standby { diff --git a/arch/arm/boot/dts/at91-sama5d3_eds.dts b/arch/arm/boot/dts/at91-sama5d3_eds.dts new file mode 100644 index 000000000000..c287b03d768b --- /dev/null +++ b/arch/arm/boot/dts/at91-sama5d3_eds.dts @@ -0,0 +1,307 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * at91-sama5d3_eds.dts - Device Tree file for the SAMA5D3 Ethernet + * Development System board. + * + * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries + * + * Author: Jerry Ray <jerry.ray@microchip.com> + */ +/dts-v1/; +#include "sama5d36.dtsi" + +/ { + model = "SAMA5D3 Ethernet Development System"; + compatible = "microchip,sama5d3-eds", "atmel,sama5d36", + "atmel,sama5d3", "atmel,sama5"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_key_gpio>; + + button-3 { + label = "PB_USER"; + gpios = <&pioE 29 GPIO_ACTIVE_LOW>; + linux,code = <0x104>; + wakeup-source; + }; + }; + + memory@20000000 { + reg = <0x20000000 0x10000000>; + }; + + vcc_3v3_reg: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vcc_2v5_reg: regulator-2 { + compatible = "regulator-fixed"; + regulator-name = "VCC_2V5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + vin-supply = <&vcc_3v3_reg>; + }; + + vcc_1v8_reg: regulator-3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + vin-supply = <&vcc_3v3_reg>; + }; + + vcc_1v2_reg: regulator-4 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vcc_mmc0_reg: regulator-5 { + compatible = "regulator-fixed"; + regulator-name = "mmc0-card-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_vcc_mmc0_reg_gpio>; + gpio = <&pioE 2 GPIO_ACTIVE_LOW>; + }; +}; + +&can0 { + status = "okay"; +}; + +&dbgu { + status = "okay"; +}; + +&ebi { + pinctrl-0 = <&pinctrl_ebi_nand_addr>; + pinctrl-names = "default"; + status = "okay"; + + nand_controller: nand-controller { + status = "okay"; + + nand@3 { + reg = <0x3 0x0 0x2>; + atmel,rb = <0>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + bootloader@40000 { + label = "bootloader"; + reg = <0x40000 0xc0000>; + }; + + bootloaderenvred@100000 { + label = "bootloader env redundant"; + reg = <0x100000 0x40000>; + }; + + bootloaderenv@140000 { + label = "bootloader env"; + reg = <0x140000 0x40000>; + }; + + dtb@180000 { + label = "device tree"; + reg = <0x180000 0x80000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x0f800000>; + }; + }; + }; + }; +}; + +&i2c0 { + pinctrl-0 = <&pinctrl_i2c0_pu>; + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + pinctrl-0 = <&pinctrl_i2c2_pu>; + status = "okay"; +}; + +&main_xtal { + clock-frequency = <12000000>; +}; + +&mmc0 { + pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 + &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>; + vmmc-supply = <&vcc_mmc0_reg>; + vqmmc-supply = <&vcc_3v3_reg>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <8>; + cd-gpios = <&pioE 0 GPIO_ACTIVE_LOW>; + }; +}; + +&pinctrl { + board { + pinctrl_i2c0_pu: i2c0-pu { + atmel,pins = + <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, + <AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; + }; + + pinctrl_i2c2_pu: i2c2-pu { + atmel,pins = + <AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>, + <AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; + }; + + pinctrl_key_gpio: key-gpio-0 { + atmel,pins = + <AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; + + pinctrl_mmc0_cd: mmc0-cd { + atmel,pins = + <AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; + + /* Reserved for reset signal to the RGMII connector. */ + pinctrl_rgmii_rstn: rgmii-rstn { + atmel,pins = + <AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; + + /* Reserved for an interrupt line from the RMII and RGMII connectors. */ + pinctrl_spi_irqn: spi-irqn { + atmel,pins = + <AT91_PIOB 28 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; + }; + + pinctrl_spi0_cs: spi0-cs-default { + atmel,pins = + <AT91_PIOD 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE + AT91_PIOD 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + + pinctrl_spi1_cs: spi1-cs-default { + atmel,pins = <AT91_PIOC 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE + AT91_PIOC 28 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + + pinctrl_usba_vbus: usba-vbus { + atmel,pins = + <AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; + }; + + pinctrl_usb_default: usb-default { + atmel,pins = + <AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_NONE + AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + + /* Reserved for VBUS fault interrupt. */ + pinctrl_vbusfault_irqn: vbusfault-irqn { + atmel,pins = + <AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; + }; + + pinctrl_vcc_mmc0_reg_gpio: vcc-mmc0-reg-gpio-default { + atmel,pins = <AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; + }; + }; +}; + +&slow_xtal { + clock-frequency = <32768>; +}; + +&spi0 { + pinctrl-names = "default", "cs"; + pinctrl-1 = <&pinctrl_spi0_cs>; + cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>; + status = "okay"; +}; + +&spi1 { + pinctrl-names = "default", "cs"; + pinctrl-1 = <&pinctrl_spi1_cs>; + cs-gpios = <&pioC 25 0>, <0>, <0>, <&pioC 28 0>; + status = "okay"; +}; + +&tcb0 { + timer0: timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>; + }; + + timer1: timer@1 { + compatible = "atmel,tcb-timer"; + reg = <1>; + }; +}; + +&usb0 { /* USB Device port with VBUS detection. */ + atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usba_vbus>; + status = "okay"; +}; + +&usb1 { /* 3-port Host. First port is unused. */ + atmel,vbus-gpio = <0 + &pioE 3 GPIO_ACTIVE_HIGH + &pioE 4 GPIO_ACTIVE_HIGH + >; + num-ports = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_default>; + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/at91-sama7g5ek.dts index de44da2e4aae..3b25c67795dd 100644 --- a/arch/arm/boot/dts/at91-sama7g5ek.dts +++ b/arch/arm/boot/dts/at91-sama7g5ek.dts @@ -244,8 +244,8 @@ regulators { vdd_3v3: VDD_IO { regulator-name = "VDD_IO"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3700000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-always-on; @@ -264,8 +264,8 @@ vddioddr: VDD_DDR { regulator-name = "VDD_DDR"; - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1450000>; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-always-on; @@ -285,8 +285,8 @@ vddcore: VDD_CORE { regulator-name = "VDD_CORE"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1850000>; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-always-on; @@ -306,7 +306,7 @@ vddcpu: VDD_OTHER { regulator-name = "VDD_OTHER"; regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1850000>; + regulator-max-microvolt = <1250000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-ramp-delay = <3125>; @@ -326,8 +326,8 @@ vldo1: LDO1 { regulator-name = "LDO1"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3700000>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; regulator-always-on; regulator-state-standby { diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi index d1181ead18e5..7a113325abb9 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -13,6 +13,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/clock/at91.h> +#include <dt-bindings/mfd/at91-usart.h> / { #address-cells = <1>; @@ -596,6 +597,7 @@ dbgu: serial@fffff200 { compatible = "atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart"; reg = <0xfffff200 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; @@ -607,6 +609,7 @@ usart0: serial@fffc0000 { compatible = "atmel,at91rm9200-usart"; reg = <0xfffc0000 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; @@ -620,6 +623,7 @@ usart1: serial@fffc4000 { compatible = "atmel,at91rm9200-usart"; reg = <0xfffc4000 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; @@ -633,6 +637,7 @@ usart2: serial@fffc8000 { compatible = "atmel,at91rm9200-usart"; reg = <0xfffc8000 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; @@ -646,6 +651,7 @@ usart3: serial@fffcc000 { compatible = "atmel,at91rm9200-usart"; reg = <0xfffcc000 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index 9d9820db9482..789fe356dbf6 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -11,6 +11,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/clock/at91.h> +#include <dt-bindings/mfd/at91-usart.h> / { #address-cells = <1>; @@ -532,6 +533,7 @@ dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; @@ -543,6 +545,7 @@ usart0: serial@fffb0000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb0000 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; @@ -556,6 +559,7 @@ usart1: serial@fffb4000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb4000 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; @@ -569,6 +573,7 @@ usart2: serial@fffb8000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb8000 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; @@ -582,6 +587,7 @@ usart3: serial@fffd0000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd0000 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; @@ -595,6 +601,7 @@ uart0: serial@fffd4000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd4000 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <24 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; @@ -608,6 +615,7 @@ uart1: serial@fffd8000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd8000 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <25 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index 259aca565305..ee0bd1aceb3f 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -9,6 +9,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/clock/at91.h> +#include <dt-bindings/mfd/at91-usart.h> / { #address-cells = <1>; @@ -179,6 +180,7 @@ usart0: serial@fffb0000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb0000 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; @@ -192,6 +194,7 @@ usart1: serial@fffb4000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb4000 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; @@ -205,6 +208,7 @@ usart2: serial@fffb8000{ compatible = "atmel,at91sam9260-usart"; reg = <0xfffb8000 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; @@ -301,6 +305,7 @@ dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index c080df8c2312..3ce9ea987312 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -9,6 +9,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/clock/at91.h> +#include <dt-bindings/mfd/at91-usart.h> / { #address-cells = <1>; @@ -540,6 +541,7 @@ dbgu: serial@ffffee00 { compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; @@ -551,6 +553,7 @@ usart0: serial@fff8c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff8c000 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; @@ -564,6 +567,7 @@ usart1: serial@fff90000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff90000 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; @@ -577,6 +581,7 @@ usart2: serial@fff94000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff94000 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 09794561c7ce..95f5d76234db 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -13,6 +13,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/clock/at91.h> +#include <dt-bindings/mfd/at91-usart.h> / { #address-cells = <1>; @@ -675,6 +676,7 @@ dbgu: serial@ffffee00 { compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; reg = <0xffffee00 0x200>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; @@ -687,6 +689,7 @@ usart0: serial@fff8c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff8c000 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; @@ -700,6 +703,7 @@ usart1: serial@fff90000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff90000 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; @@ -713,6 +717,7 @@ usart2: serial@fff94000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff94000 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; @@ -726,6 +731,7 @@ usart3: serial@fff98000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff98000 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 556f35ce49e3..83114d26f10d 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -11,6 +11,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/clock/at91.h> +#include <dt-bindings/mfd/at91-usart.h> / { #address-cells = <1>; @@ -593,6 +594,7 @@ dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; @@ -618,6 +620,7 @@ usart0: serial@f801c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf801c000 0x4000>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; @@ -629,6 +632,7 @@ usart1: serial@f8020000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8020000 0x4000>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; @@ -640,6 +644,7 @@ usart2: serial@f8024000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8024000 0x4000>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; @@ -651,6 +656,7 @@ usart3: serial@f8028000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8028000 0x4000>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart3>; diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index 12c634811820..364a2ff0a763 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -11,6 +11,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/mfd/at91-usart.h> / { #address-cells = <1>; @@ -175,6 +176,7 @@ usart0: serial@fffb0000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb0000 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; @@ -188,6 +190,7 @@ usart1: serial@fffb4000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb4000 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; @@ -201,6 +204,7 @@ usart2: serial@fffb8000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb8000 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; @@ -214,6 +218,7 @@ usart3: serial@fffbc000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffbc000 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; @@ -322,6 +327,7 @@ dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index ea3b11336c79..0c26c925761b 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -13,6 +13,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/clock/at91.h> +#include <dt-bindings/mfd/at91-usart.h> / { #address-cells = <1>; @@ -674,6 +675,7 @@ dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; @@ -688,6 +690,7 @@ usart0: serial@f801c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf801c000 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; @@ -702,6 +705,7 @@ usart1: serial@f8020000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8020000 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; @@ -716,6 +720,7 @@ usart2: serial@f8024000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8024000 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; @@ -775,6 +780,7 @@ uart0: serial@f8040000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8040000 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; @@ -786,6 +792,7 @@ uart1: serial@f8044000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8044000 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; diff --git a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi index 098d3fef5c37..a47c765e1b20 100644 --- a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi +++ b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/mfd/at91-usart.h> / { aliases { @@ -44,6 +45,7 @@ usart3: serial@f8028000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8028000 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart3>; diff --git a/arch/arm/boot/dts/bcm63178.dtsi b/arch/arm/boot/dts/bcm63178.dtsi index 5463443f0762..cbd094dde6d0 100644 --- a/arch/arm/boot/dts/bcm63178.dtsi +++ b/arch/arm/boot/dts/bcm63178.dtsi @@ -32,6 +32,7 @@ next-level-cache = <&L2_0>; enable-method = "psci"; }; + CA7_2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a7"; @@ -39,6 +40,7 @@ next-level-cache = <&L2_0>; enable-method = "psci"; }; + L2_0: l2-cache0 { compatible = "cache"; }; @@ -46,10 +48,10 @@ timer { compatible = "arm,armv7-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>; arm,cpu-registers-not-fw-configured; }; @@ -80,23 +82,23 @@ psci { compatible = "arm,psci-0.2"; method = "smc"; - cpu_off = <1>; - cpu_on = <2>; }; axi@81000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges = <0 0x81000000 0x4000>; + ranges = <0 0x81000000 0x8000>; gic: interrupt-controller@1000 { compatible = "arm,cortex-a7-gic"; #interrupt-cells = <3>; - #address-cells = <0>; interrupt-controller; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_HIGH)>; reg = <0x1000 0x1000>, - <0x2000 0x2000>; + <0x2000 0x2000>, + <0x4000 0x2000>, + <0x6000 0x2000>; }; }; diff --git a/arch/arm/boot/dts/bcm6846.dtsi b/arch/arm/boot/dts/bcm6846.dtsi index e610c102498f..8aa47a2583b2 100644 --- a/arch/arm/boot/dts/bcm6846.dtsi +++ b/arch/arm/boot/dts/bcm6846.dtsi @@ -40,10 +40,10 @@ timer { compatible = "arm,armv7-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; arm,cpu-registers-not-fw-configured; }; @@ -65,23 +65,23 @@ psci { compatible = "arm,psci-0.2"; method = "smc"; - cpu_off = <1>; - cpu_on = <2>; }; axi@81000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges = <0 0x81000000 0x4000>; + ranges = <0 0x81000000 0x8000>; gic: interrupt-controller@1000 { compatible = "arm,cortex-a7-gic"; #interrupt-cells = <3>; - #address-cells = <0>; interrupt-controller; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; reg = <0x1000 0x1000>, - <0x2000 0x2000>; + <0x2000 0x2000>, + <0x4000 0x2000>, + <0x6000 0x2000>; }; }; diff --git a/arch/arm/boot/dts/bcm6878.dtsi b/arch/arm/boot/dts/bcm6878.dtsi index a7dff596fe1e..1e8b5fa96c25 100644 --- a/arch/arm/boot/dts/bcm6878.dtsi +++ b/arch/arm/boot/dts/bcm6878.dtsi @@ -32,6 +32,7 @@ next-level-cache = <&L2_0>; enable-method = "psci"; }; + L2_0: l2-cache0 { compatible = "cache"; }; @@ -39,10 +40,10 @@ timer { compatible = "arm,armv7-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; arm,cpu-registers-not-fw-configured; }; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 89e0bdaf3a85..00a36fba2fd2 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -122,8 +122,18 @@ bus-range = <0x00 0xff>; #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &intc 16>; + interrupt-names = "intx", "error"; + interrupts = <16>, <15>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie0_intc 0>, + <0 0 0 2 &pcie0_intc 1>, + <0 0 0 3 &pcie0_intc 2>, + <0 0 0 4 &pcie0_intc 3>; + + pcie0_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; pcie1: pcie@2 { @@ -141,8 +151,18 @@ bus-range = <0x00 0xff>; #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &intc 18>; + interrupt-names = "intx", "error"; + interrupts = <18>, <17>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie1_intc 0>, + <0 0 0 2 &pcie1_intc 1>, + <0 0 0 3 &pcie1_intc 2>, + <0 0 0 4 &pcie1_intc 3>; + + pcie1_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; }; diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi index b967397a46c5..8e1c19a8ad06 100644 --- a/arch/arm/boot/dts/exynos4412-midas.dtsi +++ b/arch/arm/boot/dts/exynos4412-midas.dtsi @@ -586,7 +586,7 @@ clocks = <&camera 1>; clock-names = "extclk"; samsung,camclk-out = <1>; - gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>; + gpios = <&gpm1 6 GPIO_ACTIVE_LOW>; port { is_s5k6a3_ep: endpoint { diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index 6db09dba07ff..a3905e27b9cd 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -95,7 +95,7 @@ }; &ehci { - samsung,vbus-gpio = <&gpx3 5 1>; + samsung,vbus-gpio = <&gpx3 5 GPIO_ACTIVE_HIGH>; status = "okay"; phys = <&exynos_usbphy 2>, <&exynos_usbphy 3>; phy-names = "hsic0", "hsic1"; diff --git a/arch/arm/boot/dts/gemini-ns2502.dts b/arch/arm/boot/dts/gemini-ns2502.dts index 704abd212df5..e6eeb35e8819 100644 --- a/arch/arm/boot/dts/gemini-ns2502.dts +++ b/arch/arm/boot/dts/gemini-ns2502.dts @@ -39,10 +39,6 @@ phy0: ethernet-phy@1 { reg = <1>; device_type = "ethernet-phy"; - /* We lack the knowledge of necessary GPIO to achieve - * Gigabit - */ - max-speed = <100>; }; }; }; @@ -50,7 +46,7 @@ ðernet { status = "okay"; ethernet-port@0 { - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-handle = <&phy0>; }; }; @@ -65,30 +61,9 @@ pinctrl-1 = <&pflash_disabled_pins>; partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "RedBoot"; - reg = <0x00000000 0x00020000>; - }; - partition@20000 { - label = "kernel"; - reg = <0x00020000 0x00700000>; - }; - partition@720000 { - label = "VCTL"; - reg = <0x00720000 0x00020000>; - }; - partition@740000 { - label = "CurConf"; - reg = <0x00740000 0x000a0000>; - }; - partition@7e0000 { - label = "FIS"; - reg = <0x007e0000 0x00010000>; - }; + compatible = "redboot-fis"; + /* Eraseblock at 0x7e0000 */ + fis-index-block = <0x3f>; }; }; diff --git a/arch/arm/boot/dts/gemini-ssi1328.dts b/arch/arm/boot/dts/gemini-ssi1328.dts index 2b3e7db84fed..42e85f07cf76 100644 --- a/arch/arm/boot/dts/gemini-ssi1328.dts +++ b/arch/arm/boot/dts/gemini-ssi1328.dts @@ -40,10 +40,6 @@ phy0: ethernet-phy@1 { reg = <1>; device_type = "ethernet-phy"; - /* We lack the knowledge of necessary GPIO to achieve - * Gigabit - */ - max-speed = <100>; }; /* WAN ICPlus IP101A */ phy1: ethernet-phy@2 { diff --git a/arch/arm/boot/dts/imx23-xfi3.dts b/arch/arm/boot/dts/imx23-xfi3.dts index a6213c590f94..b1d8210f3ecc 100644 --- a/arch/arm/boot/dts/imx23-xfi3.dts +++ b/arch/arm/boot/dts/imx23-xfi3.dts @@ -158,19 +158,19 @@ default-brightness-level = <6>; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&key_pins_a>; - voldown { + key-voldown { label = "volume-down"; linux,code = <114>; gpios = <&gpio2 7 0>; debounce-interval = <20>; }; - volup { + key-volup { label = "volume-up"; linux,code = <115>; gpios = <&gpio2 8 0>; diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts index 3f38c2e60a74..c7207ea437c4 100644 --- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts +++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts @@ -13,12 +13,12 @@ model = "Eukrea MBIMXSD25"; compatible = "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25"; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpiokeys>; - bp1 { + button { label = "BP1"; gpios = <&gpio3 18 GPIO_ACTIVE_LOW>; linux,code = <BTN_MISC>; diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index bc4de0c05511..5f90d72b840b 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -515,7 +515,7 @@ #interrupt-cells = <2>; }; - sdma: sdma@53fd4000 { + sdma: dma-controller@53fd4000 { compatible = "fsl,imx25-sdma"; reg = <0x53fd4000 0x4000>; clocks = <&clks 112>, <&clks 68>; diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts index a92b05ef390f..9ef0d567ea48 100644 --- a/arch/arm/boot/dts/imx28-cfa10049.dts +++ b/arch/arm/boot/dts/imx28-cfa10049.dts @@ -327,7 +327,7 @@ }; }; - spi2 { + spi-2 { compatible = "spi-gpio"; pinctrl-names = "default"; pinctrl-0 = <&spi2_pins_cfa10049>; @@ -351,7 +351,7 @@ }; }; - spi3 { + spi-3 { compatible = "spi-gpio"; pinctrl-names = "default"; pinctrl-0 = <&spi3_pins_cfa10049>; @@ -388,12 +388,12 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&rotary_btn_pins_cfa10049>; - rotary_button { + rotary-button { label = "rotary_button"; gpios = <&gpio3 26 1>; debounce-interval = <10>; diff --git a/arch/arm/boot/dts/imx28-cfa10055.dts b/arch/arm/boot/dts/imx28-cfa10055.dts index d05c370dfc17..fac5bbda7a93 100644 --- a/arch/arm/boot/dts/imx28-cfa10055.dts +++ b/arch/arm/boot/dts/imx28-cfa10055.dts @@ -129,7 +129,7 @@ }; }; - spi2 { + spi-2 { compatible = "spi-gpio"; pinctrl-names = "default"; pinctrl-0 = <&spi2_pins_cfa10055>; diff --git a/arch/arm/boot/dts/imx28-cfa10056.dts b/arch/arm/boot/dts/imx28-cfa10056.dts index c1060bd5f17f..c5f3337e8b39 100644 --- a/arch/arm/boot/dts/imx28-cfa10056.dts +++ b/arch/arm/boot/dts/imx28-cfa10056.dts @@ -88,7 +88,7 @@ }; }; - spi2 { + spi-2 { compatible = "spi-gpio"; pinctrl-names = "default"; pinctrl-0 = <&spi2_pins_cfa10056>; diff --git a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts index bacb846f99e3..73f521c46c1e 100644 --- a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts +++ b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts @@ -204,7 +204,7 @@ pinctrl-names = "default"; pinctrl-0 = <&enocean_button>; - enocean { + key-enocean { label = "EnOcean"; linux,code = <KEY_NEW>; gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi b/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi index 3280fddaaf0d..b285a946e2c2 100644 --- a/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi +++ b/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi @@ -19,12 +19,12 @@ default-brightness-level = <10>; }; - button-sw3 { + gpio-keys-0 { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&gpio_button_sw3_pins_mbmx28lc>; - sw3 { + switch-sw3 { label = "SW3"; gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; linux,code = <BTN_MISC>; @@ -32,12 +32,12 @@ }; }; - button-sw4 { + gpio-keys-1 { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&gpio_button_sw4_pins_mbmx28lc>; - sw4 { + switch-sw4 { label = "SW4"; gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; linux,code = <BTN_MISC>; diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts index 6d7b044fec5b..096f246032c6 100644 --- a/arch/arm/boot/dts/imx28-tx28.dts +++ b/arch/arm/boot/dts/imx28-tx28.dts @@ -221,7 +221,7 @@ linux,no-autorepeat; }; - spi_gpio: spi-gpio { + spi_gpio: spi { compatible = "spi-gpio"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi index 5c4938b0d5a1..95c05f17a6d5 100644 --- a/arch/arm/boot/dts/imx31.dtsi +++ b/arch/arm/boot/dts/imx31.dtsi @@ -297,7 +297,7 @@ #interrupt-cells = <2>; }; - sdma: sdma@53fd4000 { + sdma: dma-controller@53fd4000 { compatible = "fsl,imx31-sdma"; reg = <0x53fd4000 0x4000>; interrupts = <34>; diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts index b1c11170ac25..7f4f812b0811 100644 --- a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts +++ b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts @@ -13,12 +13,12 @@ model = "Eukrea CPUIMX35"; compatible = "eukrea,mbimxsd35-baseboard", "eukrea,cpuimx35", "fsl,imx35"; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_bp1>; - bp1 { + button { label = "BP1"; gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; linux,code = <BTN_MISC>; diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi index 8e41c8b7bd70..d650f54c3fc6 100644 --- a/arch/arm/boot/dts/imx35.dtsi +++ b/arch/arm/boot/dts/imx35.dtsi @@ -284,7 +284,7 @@ #interrupt-cells = <2>; }; - sdma: sdma@53fd4000 { + sdma: dma-controller@53fd4000 { compatible = "fsl,imx35-sdma"; reg = <0x53fd4000 0x4000>; clocks = <&clks 9>, <&clks 65>; diff --git a/arch/arm/boot/dts/imx50-kobo-aura.dts b/arch/arm/boot/dts/imx50-kobo-aura.dts index 82ce8c43be86..51bf6117fb12 100644 --- a/arch/arm/boot/dts/imx50-kobo-aura.dts +++ b/arch/arm/boot/dts/imx50-kobo-aura.dts @@ -38,20 +38,20 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpiokeys>; - power { + key-power { label = "Power Button"; gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; }; - hallsensor { + event-hallsensor { label = "Hallsensor"; gpios = <&gpio5 15 GPIO_ACTIVE_LOW>; linux,code = <KEY_RESERVED>; linux,input-type = <EV_SW>; }; - frontlight { + event-frontlight { label = "Frontlight"; gpios = <&gpio4 1 GPIO_ACTIVE_LOW>; linux,code = <KEY_DISPLAYTOGGLE>; diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index c0c7575fbecf..3d9a9f37f672 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi @@ -421,7 +421,7 @@ status = "disabled"; }; - sdma: sdma@63fb0000 { + sdma: dma-controller@63fb0000 { compatible = "fsl,imx50-sdma", "fsl,imx35-sdma"; reg = <0x63fb0000 0x4000>; interrupts = <6>; diff --git a/arch/arm/boot/dts/imx51-apf51dev.dts b/arch/arm/boot/dts/imx51-apf51dev.dts index c66f274ba4e9..b61d55ca1467 100644 --- a/arch/arm/boot/dts/imx51-apf51dev.dts +++ b/arch/arm/boot/dts/imx51-apf51dev.dts @@ -63,7 +63,7 @@ leds { compatible = "gpio-leds"; - user { + led-user { label = "Heartbeat"; gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index 552196d8a60a..a1f9c6a72275 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -154,7 +154,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; - power { + key-power { label = "Power Button"; gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; linux,code = <KEY_POWER>; diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts index ec8ca3ac2c1c..3140f038aa98 100644 --- a/arch/arm/boot/dts/imx51-zii-rdu1.dts +++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts @@ -137,7 +137,7 @@ }; }; - spi_gpio: spi-gpio { + spi_gpio: spi { compatible = "spi-gpio"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 592d9c23a447..853707574d2e 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -504,7 +504,7 @@ status = "disabled"; }; - sdma: sdma@83fb0000 { + sdma: dma-controller@83fb0000 { compatible = "fsl,imx51-sdma", "fsl,imx35-sdma"; reg = <0x83fb0000 0x4000>; interrupts = <6>; diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts index 6208fbb2e741..23a7492e2929 100644 --- a/arch/arm/boot/dts/imx53-ard.dts +++ b/arch/arm/boot/dts/imx53-ard.dts @@ -61,34 +61,34 @@ gpio-keys { compatible = "gpio-keys"; - home { + key-home { label = "Home"; gpios = <&gpio5 10 0>; linux,code = <KEY_HOME>; wakeup-source; }; - back { + key-back { label = "Back"; gpios = <&gpio5 11 0>; linux,code = <KEY_BACK>; wakeup-source; }; - program { + key-program { label = "Program"; gpios = <&gpio5 12 0>; linux,code = <KEY_PROGRAM >; wakeup-source; }; - volume-up { + key-volume-up { label = "Volume Up"; gpios = <&gpio5 13 0>; linux,code = <KEY_VOLUMEUP>; }; - volume-down { + key-volume-down { label = "Volume Down"; gpios = <&gpio4 0 0>; linux,code = <KEY_VOLUMEDOWN>; diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi index fe4244044a0f..50fef8dd3675 100644 --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi @@ -45,20 +45,20 @@ gpio-keys { compatible = "gpio-keys"; - power { + key-power { label = "Power Button"; gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; }; - volume-up { + key-volume-up { label = "Volume Up"; gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; wakeup-source; }; - volume-down { + key-volume-down { label = "Volume Down"; gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; @@ -71,7 +71,7 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pin_gpio7_7>; - user { + led-user { label = "Heartbeat"; gpios = <&gpio7 7 0>; linux,default-trigger = "heartbeat"; diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts index 9be44e807188..f8d17967a67e 100644 --- a/arch/arm/boot/dts/imx53-smd.dts +++ b/arch/arm/boot/dts/imx53-smd.dts @@ -19,13 +19,13 @@ gpio-keys { compatible = "gpio-keys"; - volume-up { + key-volume-up { label = "Volume Up"; gpios = <&gpio2 14 0>; linux,code = <KEY_VOLUMEUP>; }; - volume-down { + key-volume-down { label = "Volume Down"; gpios = <&gpio2 15 0>; linux,code = <KEY_VOLUMEDOWN>; diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi index 8712e9851465..892dd1a4bac3 100644 --- a/arch/arm/boot/dts/imx53-tx53.dtsi +++ b/arch/arm/boot/dts/imx53-tx53.dtsi @@ -81,7 +81,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_key>; - power { + key-power { label = "Power Button"; gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; linux,code = <116>; /* KEY_POWER */ diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index b7a6469d3472..56b3c13f4eb7 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -710,7 +710,7 @@ status = "disabled"; }; - sdma: sdma@63fb0000 { + sdma: dma-controller@63fb0000 { compatible = "fsl,imx53-sdma", "fsl,imx35-sdma"; reg = <0x63fb0000 0x4000>; interrupts = <6>; diff --git a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi index d9de9b4f0c52..d477a937b47a 100644 --- a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi +++ b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi @@ -6,7 +6,7 @@ keyboard { compatible = "gpio-keys"; - btn0 { + button-0 { gpios = <&pcf8575 0 GPIO_ACTIVE_LOW>; label = "btn0"; linux,code = <KEY_WAKEUP>; @@ -14,7 +14,7 @@ wakeup-source; }; - btn1 { + button-1 { gpios = <&pcf8575 1 GPIO_ACTIVE_LOW>; label = "btn1"; linux,code = <KEY_WAKEUP>; @@ -22,7 +22,7 @@ wakeup-source; }; - btn2 { + button-2 { gpios = <&pcf8575 2 GPIO_ACTIVE_LOW>; label = "btn2"; linux,code = <KEY_WAKEUP>; @@ -30,7 +30,7 @@ wakeup-source; }; - btn3 { + button-3 { gpios = <&pcf8575 3 GPIO_ACTIVE_LOW>; label = "btn3"; linux,code = <KEY_WAKEUP>; diff --git a/arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi b/arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi index ec5b66453156..337db29b0010 100644 --- a/arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi +++ b/arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi @@ -188,7 +188,7 @@ rotary-encoder-key { compatible = "gpio-keys"; - rotary-encoder-press { + rotary-encoder-event { label = "rotary-encoder press"; gpios = <&tca6424a 0 GPIO_ACTIVE_HIGH>; linux,code = <KEY_ENTER>; diff --git a/arch/arm/boot/dts/imx6dl-prtmvt.dts b/arch/arm/boot/dts/imx6dl-prtmvt.dts index a35a1c66e770..1f8cddd83ccb 100644 --- a/arch/arm/boot/dts/imx6dl-prtmvt.dts +++ b/arch/arm/boot/dts/imx6dl-prtmvt.dts @@ -51,98 +51,98 @@ pinctrl-0 = <&pinctrl_gpiokeys>; autorepeat; - power { + key-power { label = "Power Button"; gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; wakeup-source; }; - f1 { + key-f1 { label = "GPIO Key F1"; linux,code = <KEY_F1>; gpios = <&gpio_pca 0 GPIO_ACTIVE_LOW>; }; - f2 { + key-f2 { label = "GPIO Key F2"; linux,code = <KEY_F2>; gpios = <&gpio_pca 1 GPIO_ACTIVE_LOW>; }; - f3 { + key-f3 { label = "GPIO Key F3"; linux,code = <KEY_F3>; gpios = <&gpio_pca 2 GPIO_ACTIVE_LOW>; }; - f4 { + key-f4 { label = "GPIO Key F4"; linux,code = <KEY_F4>; gpios = <&gpio_pca 3 GPIO_ACTIVE_LOW>; }; - f5 { + key-f5 { label = "GPIO Key F5"; linux,code = <KEY_F5>; gpios = <&gpio_pca 4 GPIO_ACTIVE_LOW>; }; - cycle { + key-cycle { label = "GPIO Key CYCLE"; linux,code = <KEY_CYCLEWINDOWS>; gpios = <&gpio_pca 5 GPIO_ACTIVE_LOW>; }; - esc { + key-esc { label = "GPIO Key ESC"; linux,code = <KEY_ESC>; gpios = <&gpio_pca 6 GPIO_ACTIVE_LOW>; }; - up { + key-up { label = "GPIO Key UP"; linux,code = <KEY_UP>; gpios = <&gpio_pca 7 GPIO_ACTIVE_LOW>; }; - down { + key-down { label = "GPIO Key DOWN"; linux,code = <KEY_DOWN>; gpios = <&gpio_pca 8 GPIO_ACTIVE_LOW>; }; - ok { + key-ok { label = "GPIO Key OK"; linux,code = <KEY_OK>; gpios = <&gpio_pca 9 GPIO_ACTIVE_LOW>; }; - f6 { + key-f6 { label = "GPIO Key F6"; linux,code = <KEY_F6>; gpios = <&gpio_pca 10 GPIO_ACTIVE_LOW>; }; - f7 { + key-f7 { label = "GPIO Key F7"; linux,code = <KEY_F7>; gpios = <&gpio_pca 11 GPIO_ACTIVE_LOW>; }; - f8 { + key-f8 { label = "GPIO Key F8"; linux,code = <KEY_F8>; gpios = <&gpio_pca 12 GPIO_ACTIVE_LOW>; }; - f9 { + key-f9 { label = "GPIO Key F9"; linux,code = <KEY_F9>; gpios = <&gpio_pca 13 GPIO_ACTIVE_LOW>; }; - f10 { + key-f10 { label = "GPIO Key F10"; linux,code = <KEY_F10>; gpios = <&gpio_pca 14 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/imx6dl-prtvt7.dts b/arch/arm/boot/dts/imx6dl-prtvt7.dts index 0a0b7acddfb2..a1eb53851794 100644 --- a/arch/arm/boot/dts/imx6dl-prtvt7.dts +++ b/arch/arm/boot/dts/imx6dl-prtvt7.dts @@ -62,91 +62,91 @@ compatible = "gpio-keys"; autorepeat; - esc { + key-esc { label = "GPIO Key ESC"; linux,code = <KEY_ESC>; gpios = <&gpio_pca 0 GPIO_ACTIVE_LOW>; }; - up { + key-up { label = "GPIO Key UP"; linux,code = <KEY_UP>; gpios = <&gpio_pca 1 GPIO_ACTIVE_LOW>; }; - down { + key-down { label = "GPIO Key DOWN"; linux,code = <KEY_DOWN>; gpios = <&gpio_pca 4 GPIO_ACTIVE_LOW>; }; - enter { + key-enter { label = "GPIO Key Enter"; linux,code = <KEY_ENTER>; gpios = <&gpio_pca 3 GPIO_ACTIVE_LOW>; }; - cycle { + key-cycle { label = "GPIO Key CYCLE"; linux,code = <KEY_CYCLEWINDOWS>; gpios = <&gpio_pca 2 GPIO_ACTIVE_LOW>; }; - f1 { + key-f1 { label = "GPIO Key F1"; linux,code = <KEY_F1>; gpios = <&gpio_pca 14 GPIO_ACTIVE_LOW>; }; - f2 { + key-f2 { label = "GPIO Key F2"; linux,code = <KEY_F2>; gpios = <&gpio_pca 13 GPIO_ACTIVE_LOW>; }; - f3 { + key-f3 { label = "GPIO Key F3"; linux,code = <KEY_F3>; gpios = <&gpio_pca 12 GPIO_ACTIVE_LOW>; }; - f4 { + key-f4 { label = "GPIO Key F4"; linux,code = <KEY_F4>; gpios = <&gpio_pca 11 GPIO_ACTIVE_LOW>; }; - f5 { + key-f5 { label = "GPIO Key F5"; linux,code = <KEY_F5>; gpios = <&gpio_pca 10 GPIO_ACTIVE_LOW>; }; - f6 { + key-f6 { label = "GPIO Key F6"; linux,code = <KEY_F6>; gpios = <&gpio_pca 5 GPIO_ACTIVE_LOW>; }; - f7 { + key-f7 { label = "GPIO Key F7"; linux,code = <KEY_F7>; gpios = <&gpio_pca 6 GPIO_ACTIVE_LOW>; }; - f8 { + key-f8 { label = "GPIO Key F8"; linux,code = <KEY_F8>; gpios = <&gpio_pca 7 GPIO_ACTIVE_LOW>; }; - f9 { + key-f9 { label = "GPIO Key F9"; linux,code = <KEY_F9>; gpios = <&gpio_pca 8 GPIO_ACTIVE_LOW>; }; - f10 { + key-f10 { label = "GPIO Key F10"; linux,code = <KEY_F10>; gpios = <&gpio_pca 9 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts index e7d9bfbfd0e4..e7be05f205d3 100644 --- a/arch/arm/boot/dts/imx6dl-riotboard.dts +++ b/arch/arm/boot/dts/imx6dl-riotboard.dts @@ -90,6 +90,7 @@ pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; phy-handle = <&rgmii_phy>; + /delete-property/ interrupts; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; fsl,err006687-workaround-present; diff --git a/arch/arm/boot/dts/imx6dl-victgo.dts b/arch/arm/boot/dts/imx6dl-victgo.dts index 779b52858a25..72df1dba83be 100644 --- a/arch/arm/boot/dts/imx6dl-victgo.dts +++ b/arch/arm/boot/dts/imx6dl-victgo.dts @@ -18,14 +18,14 @@ pinctrl-0 = <&pinctrl_gpiokeys>; autorepeat; - power { + key-power { label = "Power Button"; gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; wakeup-source; }; - enter { + key-enter { label = "Rotary Key"; gpios = <&gpio2 05 GPIO_ACTIVE_LOW>; linux,code = <KEY_ENTER>; diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi index 674af39c884a..52162e8c7274 100644 --- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi +++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi @@ -55,6 +55,7 @@ panel: panel { compatible = "dataimage,scf0700c48ggu18"; power-supply = <&sw2_reg>; + backlight = <&backlight>; status = "disabled"; port { diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index 8e0ed209ede0..dc919e09a505 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -84,6 +84,9 @@ ocram: sram@900000 { compatible = "mmio-sram"; reg = <0x00900000 0x20000>; + ranges = <0 0x00900000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; clocks = <&clks IMX6QDL_CLK_OCRAM>; }; diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts index 0b40f52268b3..75586299d9ca 100644 --- a/arch/arm/boot/dts/imx6q-arm2.dts +++ b/arch/arm/boot/dts/imx6q-arm2.dts @@ -178,6 +178,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; + /delete-property/ interrupts; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; fsl,err006687-workaround-present; diff --git a/arch/arm/boot/dts/imx6q-evi.dts b/arch/arm/boot/dts/imx6q-evi.dts index c63f371ede8b..78d941fef5df 100644 --- a/arch/arm/boot/dts/imx6q-evi.dts +++ b/arch/arm/boot/dts/imx6q-evi.dts @@ -146,6 +146,7 @@ pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + /delete-property/ interrupts; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; fsl,err006687-workaround-present; diff --git a/arch/arm/boot/dts/imx6q-mccmon6.dts b/arch/arm/boot/dts/imx6q-mccmon6.dts index 55692c73943d..f08b37010291 100644 --- a/arch/arm/boot/dts/imx6q-mccmon6.dts +++ b/arch/arm/boot/dts/imx6q-mccmon6.dts @@ -100,8 +100,10 @@ pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; + /delete-property/ interrupts; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; + fsl,err006687-workaround-present; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-novena.dts b/arch/arm/boot/dts/imx6q-novena.dts index 225cf6b7a7a4..ee8c0bd3ecfd 100644 --- a/arch/arm/boot/dts/imx6q-novena.dts +++ b/arch/arm/boot/dts/imx6q-novena.dts @@ -86,7 +86,7 @@ linux,code = <KEY_POWER>; }; - lid { + lid-event { label = "Lid"; gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; linux,input-type = <5>; /* EV_SW */ @@ -99,7 +99,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_leds_novena>; - heartbeat { + led-heartbeat { label = "novena:white:panel"; gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; linux,default-trigger = "default-on"; diff --git a/arch/arm/boot/dts/imx6q-pistachio.dts b/arch/arm/boot/dts/imx6q-pistachio.dts index 7a33e54cc0f1..bad8d831e64e 100644 --- a/arch/arm/boot/dts/imx6q-pistachio.dts +++ b/arch/arm/boot/dts/imx6q-pistachio.dts @@ -100,7 +100,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; - power { + key-power { label = "Power Button"; gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; wakeup-source; diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts index dc51262e7b2f..7c6a2f234ccb 100644 --- a/arch/arm/boot/dts/imx6q-sabrelite.dts +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts @@ -1,43 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright 2011 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q-utilite-pro.dts b/arch/arm/boot/dts/imx6q-utilite-pro.dts index d16ff2083d62..ad59b23ef27a 100644 --- a/arch/arm/boot/dts/imx6q-utilite-pro.dts +++ b/arch/arm/boot/dts/imx6q-utilite-pro.dts @@ -89,7 +89,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; - power { + key-power { label = "Power Button"; gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; diff --git a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts b/arch/arm/boot/dts/imx6q-var-dt6customboard.dts index 63550351340d..2290c1237634 100644 --- a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts +++ b/arch/arm/boot/dts/imx6q-var-dt6customboard.dts @@ -28,7 +28,7 @@ compatible = "gpio-keys"; autorepeat; - back { + key-back { gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; linux,code = <KEY_BACK>; label = "Key Back"; @@ -37,7 +37,7 @@ wakeup-source; }; - home { + key-home { gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOME>; label = "Key Home"; @@ -46,7 +46,7 @@ wakeup-source; }; - menu { + key-menu { gpios = <&gpio4 25 GPIO_ACTIVE_LOW>; linux,code = <KEY_MENU>; label = "Key Menu"; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 3b77eae40e39..df86049a695b 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -163,6 +163,9 @@ ocram: sram@900000 { compatible = "mmio-sram"; reg = <0x00900000 0x40000>; + ranges = <0 0x00900000 0x40000>; + #address-cells = <1>; + #size-cells = <1>; clocks = <&clks IMX6QDL_CLK_OCRAM>; }; diff --git a/arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi b/arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi index fe72650295a5..6248b126b557 100644 --- a/arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi @@ -332,37 +332,4 @@ MX6QDL_PAD_GPIO_0__GPIO1_IO00 0xb1 /* Int */ >; }; - - pinctrl_ipu1_lcdif: ipu1-lcdif-grp { - fsl,pins = < - MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x38 - MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x38 - MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x38 - MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x38 - MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x38 - MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x38 - MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x38 - MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x38 - MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x38 - MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x38 - MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x38 - MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x38 - MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x38 - MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x38 - MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x38 - MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x38 - MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x38 - MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x38 - MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x38 - MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x38 - MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x38 - MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x38 - MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x38 - MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x38 - MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x38 - MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x38 - MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x38 - MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x38 - >; - }; }; diff --git a/arch/arm/boot/dts/imx6qdl-dhcom-som.dtsi b/arch/arm/boot/dts/imx6qdl-dhcom-som.dtsi index 5befbe13d1a3..eaa87b333164 100644 --- a/arch/arm/boot/dts/imx6qdl-dhcom-som.dtsi +++ b/arch/arm/boot/dts/imx6qdl-dhcom-som.dtsi @@ -667,6 +667,39 @@ >; }; + pinctrl_ipu1_lcdif: ipu1-lcdif-grp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x38 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x38 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x38 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x38 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x38 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x38 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x38 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x38 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x38 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x38 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x38 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x38 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x38 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x38 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x38 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x38 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x38 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x38 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x38 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x38 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x38 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x38 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x38 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x38 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x38 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x38 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x38 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x38 + >; + }; + pinctrl_pcie: pcie-grp { fsl,pins = < MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b1 /* Wake */ diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index b1df2beb2832..728810b9d677 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -137,6 +137,16 @@ regulator-always-on; }; + reg_can1_stby: regulator-can1-stby { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_can1>; + regulator-name = "can1_stby"; + gpio = <&gpio1 9 GPIO_ACTIVE_LOW>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + reg_usb_otg_vbus: regulator-usb-otg-vbus { compatible = "regulator-fixed"; regulator-name = "usb_otg_vbus"; @@ -170,6 +180,7 @@ &can1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_can1_stby>; status = "okay"; }; @@ -612,7 +623,6 @@ fsl,pins = < MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 - MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x4001b0b0 /* CAN_STBY */ >; }; @@ -702,6 +712,12 @@ >; }; + pinctrl_reg_can1: regcan1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x4001b0b0 /* CAN_STBY */ + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index a0710d562766..6c0c109046d8 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -129,6 +129,16 @@ regulator-always-on; }; + reg_can1_stby: regulator-can1-stby { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_can1>; + regulator-name = "can1_stby"; + gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + reg_usb_h1_vbus: regulator-usb-h1-vbus { compatible = "regulator-fixed"; regulator-name = "usb_h1_vbus"; @@ -170,6 +180,7 @@ &can1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_can1_stby>; status = "okay"; }; @@ -600,7 +611,6 @@ fsl,pins = < MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */ >; }; @@ -691,6 +701,12 @@ >; }; + pinctrl_reg_can1: regcan1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */ + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi index cda48bf2f168..a9b04f9f1c2b 100644 --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi @@ -137,6 +137,16 @@ regulator-always-on; }; + reg_can1_stby: regulator-can1-stby { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_can1>; + regulator-name = "can1_stby"; + gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + reg_usb_h1_vbus: regulator@2 { compatible = "regulator-fixed"; reg = <2>; @@ -200,6 +210,7 @@ &can1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_can1_stby>; status = "okay"; }; @@ -687,7 +698,6 @@ fsl,pins = < MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */ >; }; @@ -786,6 +796,12 @@ >; }; + pinctrl_reg_can1: regcan1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */ + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi index 095c9143d99a..85aeebc9485d 100644 --- a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi @@ -51,16 +51,6 @@ vin-supply = <®_3p3v_s5>; }; - reg_3p3v_s0: regulator-3p3v-s0 { - compatible = "regulator-fixed"; - regulator-name = "V_3V3_S0"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <®_3p3v_s5>; - }; - reg_3p3v_s5: regulator-3p3v-s5 { compatible = "regulator-fixed"; regulator-name = "V_3V3_S5"; @@ -259,7 +249,7 @@ /* default boot source: workaround #1 for errata ERR006282 */ smarc_flash: flash@0 { - compatible = "winbond,w25q16dw", "jedec,spi-nor"; + compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <20000000>; }; @@ -270,7 +260,23 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + phy-handle = <ðphy>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + reset-assert-us = <1000>; + }; + }; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; }; &i2c_intern { @@ -397,7 +403,7 @@ /* HDMI_CTRL */ &i2c2 { - clock-frequency = <375000>; + clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; }; diff --git a/arch/arm/boot/dts/imx6qdl-mba6.dtsi b/arch/arm/boot/dts/imx6qdl-mba6.dtsi index f4dca20669d6..78555a618851 100644 --- a/arch/arm/boot/dts/imx6qdl-mba6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-mba6.dtsi @@ -244,7 +244,6 @@ status = "okay"; }; - &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi index 0ad4cb4f1e82..a53a5d0766a5 100644 --- a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi @@ -192,6 +192,7 @@ phy-mode = "rgmii"; phy-handle = <ðphy>; phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; + /delete-property/ interrupts; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; fsl,err006687-workaround-present; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi index beaa2dcd436c..57c21a01f126 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi @@ -334,6 +334,7 @@ phy-mode = "rgmii"; phy-handle = <ðphy>; phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; + /delete-property/ interrupts; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; fsl,err006687-workaround-present; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi index ee7e2371f94b..000e9dc97b1a 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi @@ -263,6 +263,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; + /delete-property/ interrupts; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; fsl,err006687-workaround-present; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index 904d5d051d63..731759bdd7f5 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -267,6 +267,7 @@ phy-mode = "rgmii"; phy-handle = <ðphy>; phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; + /delete-property/ interrupts; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; fsl,err006687-workaround-present; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-av-02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-av-02.dtsi index 393475cb0f4d..0020dbb1722c 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-av-02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-av-02.dtsi @@ -64,7 +64,7 @@ interrupt-parent = <&gpio3>; interrupts = <2 IRQ_TYPE_NONE>; status = "disabled"; - }; + }; }; &ipu1_di0_disp0 { diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index 1368a4762037..3dbb460ef102 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -295,6 +295,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; + /delete-property/ interrupts; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; fsl,err006687-workaround-present; diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index 901b9a761b66..22f8e2783cdf 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -1,43 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright 2011 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/clock/imx6qdl-clock.h> diff --git a/arch/arm/boot/dts/imx6qdl-skov-cpu-revc.dtsi b/arch/arm/boot/dts/imx6qdl-skov-cpu-revc.dtsi index 8254bce1b8a2..b81799d7076a 100644 --- a/arch/arm/boot/dts/imx6qdl-skov-cpu-revc.dtsi +++ b/arch/arm/boot/dts/imx6qdl-skov-cpu-revc.dtsi @@ -2,35 +2,60 @@ // // Copyright (C) 2020 Pengutronix, Ulrich Oelmann <kernel@pengutronix.de> +/ { + touchscreen { + compatible = "resistive-adc-touch"; + io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>, <&adc_ts 5>; + io-channel-names = "y", "z1", "z2", "x"; + touchscreen-min-pressure = <65000>; + touchscreen-inverted-y; + touchscreen-swapped-x-y; + touchscreen-x-plate-ohms = <300>; + touchscreen-y-plate-ohms = <800>; + }; +}; + &ecspi4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi4>; cs-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>; status = "okay"; - touchscreen@0 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_touch>; - compatible = "ti,tsc2046"; + adc_ts: adc@0 { + compatible = "ti,tsc2046e-adc"; reg = <0>; + pinctrl-0 = <&pinctrl_touch>; + pinctrl-names ="default"; spi-max-frequency = <1000000>; interrupts-extended = <&gpio3 19 IRQ_TYPE_LEVEL_LOW>; - vcc-supply = <®_3v3>; - pendown-gpio = <&gpio3 19 GPIO_ACTIVE_LOW>; - ti,x-plate-ohms = /bits/ 16 <850>; - ti,y-plate-ohms = /bits/ 16 <295>; - ti,pressure-min = /bits/ 16 <2>; - ti,pressure-max = /bits/ 16 <1500>; - ti,vref-mv = /bits/ 16 <3300>; - ti,settle-delay-usec = /bits/ 16 <15>; - ti,vref-delay-usecs = /bits/ 16 <0>; - ti,penirq-recheck-delay-usecs = /bits/ 16 <100>; - ti,debounce-max = /bits/ 16 <100>; - ti,debounce-tol = /bits/ 16 <(~0)>; - ti,debounce-rep = /bits/ 16 <4>; - touchscreen-swapped-x-y; - touchscreen-inverted-y; - wakeup-source; + #io-channel-cells = <1>; + + #address-cells = <1>; + #size-cells = <0>; + + channel@1 { + reg = <1>; + settling-time-us = <700>; + oversampling-ratio = <5>; + }; + + channel@3 { + reg = <3>; + settling-time-us = <700>; + oversampling-ratio = <5>; + }; + + channel@4 { + reg = <4>; + settling-time-us = <700>; + oversampling-ratio = <5>; + }; + + channel@5 { + reg = <5>; + settling-time-us = <700>; + oversampling-ratio = <5>; + }; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi b/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi index 7dc3f0005b0f..aff46f3040c1 100644 --- a/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi @@ -7,6 +7,7 @@ #include <dt-bindings/gpio/gpio.h> &fec { + /delete-property/ interrupts; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; fsl,err006687-workaround-present; @@ -35,6 +36,7 @@ compatible = "st,24c64", "atmel,24c64"; reg = <0x50>; pagesize = <32>; + vcc-supply = <®_3p3v>; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-tqma6b.dtsi b/arch/arm/boot/dts/imx6qdl-tqma6b.dtsi index dd0925766440..a3f6543c3aaa 100644 --- a/arch/arm/boot/dts/imx6qdl-tqma6b.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tqma6b.dtsi @@ -29,5 +29,6 @@ compatible = "st,24c64", "atmel,24c64"; reg = <0x50>; pagesize = <32>; + vcc-supply = <®_3p3v>; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-ts7970.dtsi b/arch/arm/boot/dts/imx6qdl-ts7970.dtsi index d6ba4b2a60f6..c096d25a6f5b 100644 --- a/arch/arm/boot/dts/imx6qdl-ts7970.dtsi +++ b/arch/arm/boot/dts/imx6qdl-ts7970.dtsi @@ -192,6 +192,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; + /delete-property/ interrupts; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; fsl,err006687-workaround-present; diff --git a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi index a1676b5d2980..c4e6cf0527ba 100644 --- a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi +++ b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi @@ -28,7 +28,7 @@ enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; }; - backlight_led: backlight_led { + backlight_led: backlight-led { compatible = "pwm-backlight"; pwms = <&pwm3 0 5000000 0>; brightness-levels = <0 16 64 255>; @@ -37,6 +37,16 @@ power-supply = <®_3v3>; }; + /* only for backwards compatibility with old HW */ + backlight_isb: backlight-isb { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 5000000 0>; + brightness-levels = <0 8 48 255>; + num-interpolated-steps = <5>; + default-brightness-level = <0>; + power-supply = <®_3v3>; + }; + connector { compatible = "composite-video-connector"; label = "Composite0"; @@ -370,6 +380,12 @@ status = "okay"; }; +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + &pwm3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3>; @@ -601,6 +617,12 @@ >; }; + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT9__PWM2_OUT 0x1b0b0 + >; + }; + pinctrl_pwm3: pwm3grp { fsl,pins = < MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b0 diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 4f7fefc14d0a..ff1e0173b39b 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -929,7 +929,7 @@ interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>; }; - sdma: sdma@20ec000 { + sdma: dma-controller@20ec000 { compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma"; reg = <0x020ec000 0x4000>; interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/imx6qp.dtsi b/arch/arm/boot/dts/imx6qp.dtsi index 050365513836..fc164991d2ae 100644 --- a/arch/arm/boot/dts/imx6qp.dtsi +++ b/arch/arm/boot/dts/imx6qp.dtsi @@ -9,12 +9,18 @@ ocram2: sram@940000 { compatible = "mmio-sram"; reg = <0x00940000 0x20000>; + ranges = <0 0x00940000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; clocks = <&clks IMX6QDL_CLK_OCRAM>; }; ocram3: sram@960000 { compatible = "mmio-sram"; reg = <0x00960000 0x20000>; + ranges = <0 0x00960000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; clocks = <&clks IMX6QDL_CLK_OCRAM>; }; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 06a515121dfc..28111efb19a6 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -61,10 +61,10 @@ <792000 1175000>, <396000 975000>; fsl,soc-operating-points = - /* ARM kHz SOC-PU uV */ - <996000 1225000>, - <792000 1175000>, - <396000 1175000>; + /* ARM kHz SOC-PU uV */ + <996000 1225000>, + <792000 1175000>, + <396000 1175000>; clock-latency = <61036>; /* two CLK32 periods */ #cooling-cells = <2>; clocks = <&clks IMX6SL_CLK_ARM>, <&clks IMX6SL_CLK_PLL2_PFD2>, @@ -115,6 +115,9 @@ ocram: sram@900000 { compatible = "mmio-sram"; reg = <0x00900000 0x20000>; + ranges = <0 0x00900000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; clocks = <&clks IMX6SL_CLK_OCRAM>; }; @@ -222,7 +225,7 @@ uart5: serial@2018000 { compatible = "fsl,imx6sl-uart", - "fsl,imx6q-uart", "fsl,imx21-uart"; + "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x02018000 0x4000>; interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SL_CLK_UART>, @@ -235,7 +238,7 @@ uart1: serial@2020000 { compatible = "fsl,imx6sl-uart", - "fsl,imx6q-uart", "fsl,imx21-uart"; + "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x02020000 0x4000>; interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SL_CLK_UART>, @@ -248,7 +251,7 @@ uart2: serial@2024000 { compatible = "fsl,imx6sl-uart", - "fsl,imx6q-uart", "fsl,imx21-uart"; + "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x02024000 0x4000>; interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SL_CLK_UART>, @@ -309,7 +312,7 @@ uart3: serial@2034000 { compatible = "fsl,imx6sl-uart", - "fsl,imx6q-uart", "fsl,imx21-uart"; + "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x02034000 0x4000>; interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SL_CLK_UART>, @@ -322,7 +325,7 @@ uart4: serial@2038000 { compatible = "fsl,imx6sl-uart", - "fsl,imx6q-uart", "fsl,imx21-uart"; + "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x02038000 0x4000>; interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SL_CLK_UART>, @@ -711,7 +714,7 @@ #power-domain-cells = <0>; power-supply = <®_pu>; clocks = <&clks IMX6SL_CLK_GPU2D_OVG>, - <&clks IMX6SL_CLK_GPU2D_PODF>; + <&clks IMX6SL_CLK_GPU2D_PODF>; }; pd_disp: power-domain@2 { @@ -747,7 +750,7 @@ interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; }; - sdma: sdma@20ec000 { + sdma: dma-controller@20ec000 { compatible = "fsl,imx6sl-sdma", "fsl,imx6q-sdma"; reg = <0x020ec000 0x4000>; interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi index d4a000c3dde7..2873369a57c0 100644 --- a/arch/arm/boot/dts/imx6sll.dtsi +++ b/arch/arm/boot/dts/imx6sll.dtsi @@ -115,6 +115,9 @@ ocram: sram@900000 { compatible = "mmio-sram"; reg = <0x00900000 0x20000>; + ranges = <0 0x00900000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; }; intc: interrupt-controller@a01000 { diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi index 35861bbea94e..c84ea1fac5e9 100644 --- a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi +++ b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi @@ -226,7 +226,7 @@ &iomuxc { pinctrl_bt_reg: btreggrp { fsl,pins = - <MX6SX_PAD_KEY_ROW2__GPIO2_IO_17 0x15059>; + <MX6SX_PAD_KEY_ROW2__GPIO2_IO_17 0x15059>; }; pinctrl_enet1: enet1grp { @@ -306,7 +306,6 @@ >; }; - pinctrl_uart1: uart1grp { fsl,pins = <MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX 0x1b0b1>, @@ -347,24 +346,23 @@ pinctrl_otg1_reg: otg1grp { fsl,pins = - <MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x10b0>; + <MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x10b0>; }; - pinctrl_otg2_reg: otg2grp { fsl,pins = - <MX6SX_PAD_NAND_RE_B__GPIO4_IO_12 0x10b0>; + <MX6SX_PAD_NAND_RE_B__GPIO4_IO_12 0x10b0>; }; pinctrl_usb_otg1: usbotg1grp { fsl,pins = - <MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID 0x17059>, - <MX6SX_PAD_GPIO1_IO08__USB_OTG1_OC 0x10b0>; + <MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID 0x17059>, + <MX6SX_PAD_GPIO1_IO08__USB_OTG1_OC 0x10b0>; }; pinctrl_usb_otg2: usbot2ggrp { fsl,pins = - <MX6SX_PAD_QSPI1A_DATA0__USB_OTG2_OC 0x10b0>; + <MX6SX_PAD_QSPI1A_DATA0__USB_OTG2_OC 0x10b0>; }; pinctrl_usdhc2: usdhc2grp { diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 4d075e2bf749..abc3572d699e 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -164,12 +164,18 @@ ocram_s: sram@8f8000 { compatible = "mmio-sram"; reg = <0x008f8000 0x4000>; + ranges = <0 0x008f8000 0x4000>; + #address-cells = <1>; + #size-cells = <1>; clocks = <&clks IMX6SX_CLK_OCRAM_S>; }; ocram: sram@900000 { compatible = "mmio-sram"; reg = <0x00900000 0x20000>; + ranges = <0 0x00900000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; clocks = <&clks IMX6SX_CLK_OCRAM>; }; @@ -842,7 +848,7 @@ reg = <0x020e4000 0x4000>; }; - sdma: sdma@20ec000 { + sdma: dma-controller@20ec000 { compatible = "fsl,imx6sx-sdma", "fsl,imx6q-sdma"; reg = <0x020ec000 0x4000>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi index 1a18c41ce385..c83e64a62d8a 100644 --- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi @@ -82,7 +82,7 @@ "AMIC", "MICB"; }; - spi4 { + spi-4 { compatible = "spi-gpio"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi4>; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts b/arch/arm/boot/dts/imx6ul-kontron-bl-43.dts index 5bfad4655b22..0c643706a158 100644 --- a/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts +++ b/arch/arm/boot/dts/imx6ul-kontron-bl-43.dts @@ -5,12 +5,12 @@ * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org> */ -#include "imx6ul-kontron-n6310-s.dts" +#include "imx6ul-kontron-bl.dts" / { - model = "Kontron N6310 S 43"; - compatible = "kontron,imx6ul-n6310-s-43", "kontron,imx6ul-n6310-s", - "kontron,imx6ul-n6310-som", "fsl,imx6ul"; + model = "Kontron BL i.MX6UL 43 (N631X S 43)"; + compatible = "kontron,bl-imx6ul-43", "kontron,bl-imx6ul", + "kontron,sl-imx6ul", "fsl,imx6ul"; backlight { compatible = "pwm-backlight"; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi b/arch/arm/boot/dts/imx6ul-kontron-bl-common.dtsi index 43868311f48a..43868311f48a 100644 --- a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi +++ b/arch/arm/boot/dts/imx6ul-kontron-bl-common.dtsi diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts b/arch/arm/boot/dts/imx6ul-kontron-bl.dts index 5a3e06d6219b..dadf6d3d5f52 100644 --- a/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts +++ b/arch/arm/boot/dts/imx6ul-kontron-bl.dts @@ -7,11 +7,10 @@ /dts-v1/; -#include "imx6ul-kontron-n6310-som.dtsi" -#include "imx6ul-kontron-n6x1x-s.dtsi" +#include "imx6ul-kontron-sl.dtsi" +#include "imx6ul-kontron-bl-common.dtsi" / { - model = "Kontron N6310 S"; - compatible = "kontron,imx6ul-n6310-s", "kontron,imx6ul-n6310-som", - "fsl,imx6ul"; + model = "Kontron BL i.MX6UL (N631X S)"; + compatible = "kontron,bl-imx6ul", "kontron,sl-imx6ul", "fsl,imx6ul"; }; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi deleted file mode 100644 index acd936540d89..000000000000 --- a/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi +++ /dev/null @@ -1,41 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (C) 2017 exceet electronics GmbH - * Copyright (C) 2018 Kontron Electronics GmbH - * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org> - */ - -#include "imx6ul.dtsi" -#include "imx6ul-kontron-n6x1x-som-common.dtsi" - -/ { - model = "Kontron N6310 SOM"; - compatible = "kontron,imx6ul-n6310-som", "fsl,imx6ul"; - - memory@80000000 { - reg = <0x80000000 0x10000000>; - device_type = "memory"; - }; -}; - -&qspi { - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "spi-nand"; - spi-max-frequency = <108000000>; - spi-tx-bus-width = <4>; - spi-rx-bus-width = <4>; - reg = <0>; - - partition@0 { - label = "ubi1"; - reg = <0x00000000 0x08000000>; - }; - - partition@8000000 { - label = "ubi2"; - reg = <0x08000000 0x08000000>; - }; - }; -}; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6311-s.dts b/arch/arm/boot/dts/imx6ul-kontron-n6311-s.dts deleted file mode 100644 index 239a1af3aeaa..000000000000 --- a/arch/arm/boot/dts/imx6ul-kontron-n6311-s.dts +++ /dev/null @@ -1,16 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (C) 2017 exceet electronics GmbH - * Copyright (C) 2018 Kontron Electronics GmbH - */ - -/dts-v1/; - -#include "imx6ul-kontron-n6311-som.dtsi" -#include "imx6ul-kontron-n6x1x-s.dtsi" - -/ { - model = "Kontron N6311 S"; - compatible = "kontron,imx6ul-n6311-s", "kontron,imx6ul-n6311-som", - "fsl,imx6ul"; -}; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi deleted file mode 100644 index 29ed38dce580..000000000000 --- a/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi +++ /dev/null @@ -1,40 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (C) 2017 exceet electronics GmbH - * Copyright (C) 2018 Kontron Electronics GmbH - */ - -#include "imx6ul.dtsi" -#include "imx6ul-kontron-n6x1x-som-common.dtsi" - -/ { - model = "Kontron N6311 SOM"; - compatible = "kontron,imx6ul-n6311-som", "fsl,imx6ul"; - - memory@80000000 { - reg = <0x80000000 0x20000000>; - device_type = "memory"; - }; -}; - -&qspi { - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "spi-nand"; - spi-max-frequency = <104000000>; - spi-tx-bus-width = <4>; - spi-rx-bus-width = <4>; - reg = <0>; - - partition@0 { - label = "ubi1"; - reg = <0x00000000 0x08000000>; - }; - - partition@8000000 { - label = "ubi2"; - reg = <0x08000000 0x18000000>; - }; - }; -}; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi b/arch/arm/boot/dts/imx6ul-kontron-sl-common.dtsi index 09a83dbdf651..dcf88f610346 100644 --- a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi +++ b/arch/arm/boot/dts/imx6ul-kontron-sl-common.dtsi @@ -11,6 +11,11 @@ chosen { stdout-path = &uart4; }; + + memory@80000000 { + reg = <0x80000000 0x10000000>; + device_type = "memory"; + }; }; &ecspi2 { @@ -55,6 +60,16 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_qspi>; status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-nand"; + spi-max-frequency = <104000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + reg = <0>; + }; }; &wdog1 { diff --git a/arch/arm/boot/dts/imx6ul-kontron-sl.dtsi b/arch/arm/boot/dts/imx6ul-kontron-sl.dtsi new file mode 100644 index 000000000000..0580d043e5ae --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-kontron-sl.dtsi @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 exceet electronics GmbH + * Copyright (C) 2018 Kontron Electronics GmbH + * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org> + */ + +#include "imx6ul.dtsi" +#include "imx6ul-kontron-sl-common.dtsi" + +/ { + model = "Kontron SL i.MX6UL (N631X SOM)"; + compatible = "kontron,sl-imx6ul", "fsl,imx6ul"; +}; diff --git a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi index c485d058e079..15ee0275feaf 100644 --- a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi @@ -212,7 +212,7 @@ enable-active-high; }; - spi_gpio: spi-gpio { + spi_gpio: spi { #address-cells = <1>; #size-cells = <0>; compatible = "spi-gpio"; diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index c95efd1d8c2d..2b5996395701 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -744,7 +744,7 @@ status = "disabled"; }; - sdma: sdma@20ec000 { + sdma: dma-controller@20ec000 { compatible = "fsl,imx6ul-sdma", "fsl,imx6q-sdma", "fsl,imx35-sdma"; reg = <0x020ec000 0x4000>; diff --git a/arch/arm/boot/dts/imx6ull-kontron-bl.dts b/arch/arm/boot/dts/imx6ull-kontron-bl.dts new file mode 100644 index 000000000000..fa016465cdbc --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-kontron-bl.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 exceet electronics GmbH + * Copyright (C) 2019 Kontron Electronics GmbH + */ + +/dts-v1/; + +#include "imx6ull-kontron-sl.dtsi" +#include "imx6ul-kontron-bl-common.dtsi" + +/ { + model = "Kontron BL i.MX6ULL (N641X S)"; + compatible = "kontron,bl-imx6ull", "kontron,sl-imx6ull", "fsl,imx6ull"; +}; diff --git a/arch/arm/boot/dts/imx6ull-kontron-n6411-s.dts b/arch/arm/boot/dts/imx6ull-kontron-n6411-s.dts deleted file mode 100644 index 57588a5e1e34..000000000000 --- a/arch/arm/boot/dts/imx6ull-kontron-n6411-s.dts +++ /dev/null @@ -1,16 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (C) 2017 exceet electronics GmbH - * Copyright (C) 2019 Kontron Electronics GmbH - */ - -/dts-v1/; - -#include "imx6ull-kontron-n6411-som.dtsi" -#include "imx6ul-kontron-n6x1x-s.dtsi" - -/ { - model = "Kontron N6411 S"; - compatible = "kontron,imx6ull-n6411-s", "kontron,imx6ull-n6411-som", - "fsl,imx6ull"; -}; diff --git a/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi b/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi deleted file mode 100644 index d000606c0704..000000000000 --- a/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi +++ /dev/null @@ -1,40 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (C) 2017 exceet electronics GmbH - * Copyright (C) 2018 Kontron Electronics GmbH - */ - -#include "imx6ull.dtsi" -#include "imx6ul-kontron-n6x1x-som-common.dtsi" - -/ { - model = "Kontron N6411 SOM"; - compatible = "kontron,imx6ull-n6311-som", "fsl,imx6ull"; - - memory@80000000 { - reg = <0x80000000 0x20000000>; - device_type = "memory"; - }; -}; - -&qspi { - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "spi-nand"; - spi-max-frequency = <104000000>; - spi-tx-bus-width = <4>; - spi-rx-bus-width = <4>; - reg = <0>; - - partition@0 { - label = "ubi1"; - reg = <0x00000000 0x08000000>; - }; - - partition@8000000 { - label = "ubi2"; - reg = <0x08000000 0x18000000>; - }; - }; -}; diff --git a/arch/arm/boot/dts/imx6ull-kontron-sl.dtsi b/arch/arm/boot/dts/imx6ull-kontron-sl.dtsi new file mode 100644 index 000000000000..93f10eb3494f --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-kontron-sl.dtsi @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 exceet electronics GmbH + * Copyright (C) 2018 Kontron Electronics GmbH + */ + +#include "imx6ull.dtsi" +#include "imx6ul-kontron-sl-common.dtsi" + +/ { + model = "Kontron SL i.MX6ULL (N641X SOM)"; + compatible = "kontron,sl-imx6ull", "fsl,imx6ull"; +}; diff --git a/arch/arm/boot/dts/imx7d-pico.dtsi b/arch/arm/boot/dts/imx7d-pico.dtsi index e519897fae08..e0bff39e8d3e 100644 --- a/arch/arm/boot/dts/imx7d-pico.dtsi +++ b/arch/arm/boot/dts/imx7d-pico.dtsi @@ -41,7 +41,7 @@ regulator-max-microvolt = <3300000>; gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>; enable-active-high; - }; + }; reg_wlreg_on: regulator-wlreg_on { compatible = "regulator-fixed"; @@ -432,7 +432,7 @@ MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1 MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1 MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1 - MX7D_PAD_SD3_RESET_B__GPIO6_IO11 0x1 /* Ethernet reset */ + MX7D_PAD_SD3_RESET_B__GPIO6_IO11 0x1 /* Ethernet reset */ >; }; @@ -493,19 +493,19 @@ pinctrl_pwm1: pwm1 { fsl,pins = < - MX7D_PAD_GPIO1_IO08__PWM1_OUT 0x7f + MX7D_PAD_GPIO1_IO08__PWM1_OUT 0x7f >; }; pinctrl_pwm2: pwm2 { fsl,pins = < - MX7D_PAD_GPIO1_IO09__PWM2_OUT 0x7f + MX7D_PAD_GPIO1_IO09__PWM2_OUT 0x7f >; }; pinctrl_pwm3: pwm3 { fsl,pins = < - MX7D_PAD_GPIO1_IO10__PWM3_OUT 0x7f + MX7D_PAD_GPIO1_IO10__PWM3_OUT 0x7f >; }; diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index 78f4224a9bf4..f483bc0afe5e 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -24,14 +24,14 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; - volume-up { + key-volume-up { label = "Volume Up"; gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; wakeup-source; }; - volume-down { + key-volume-down { label = "Volume Down"; gpios = <&gpio5 10 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; @@ -39,7 +39,7 @@ }; }; - spi4 { + spi-4 { compatible = "spi-gpio"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi4>; @@ -206,12 +206,7 @@ interrupt-parent = <&gpio2>; interrupts = <29 0>; pendown-gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>; - ti,x-min = /bits/ 16 <0>; - ti,x-max = /bits/ 16 <0>; - ti,y-min = /bits/ 16 <0>; - ti,y-max = /bits/ 16 <0>; - ti,pressure-max = /bits/ 16 <0>; - ti,x-plate-ohms = /bits/ 16 <400>; + touchscreen-max-pressure = <255>; wakeup-source; }; }; diff --git a/arch/arm/boot/dts/imx7d-zii-rmu2.dts b/arch/arm/boot/dts/imx7d-zii-rmu2.dts index 1065941807e8..1c9f25848bf7 100644 --- a/arch/arm/boot/dts/imx7d-zii-rmu2.dts +++ b/arch/arm/boot/dts/imx7d-zii-rmu2.dts @@ -24,7 +24,7 @@ pinctrl-0 = <&pinctrl_leds_debug>; pinctrl-names = "default"; - debug { + led-debug { label = "zii:green:debug1"; gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; diff --git a/arch/arm/boot/dts/imx7d-zii-rpu2.dts b/arch/arm/boot/dts/imx7d-zii-rpu2.dts index 893bd30aa2a3..9d29490ab4c9 100644 --- a/arch/arm/boot/dts/imx7d-zii-rpu2.dts +++ b/arch/arm/boot/dts/imx7d-zii-rpu2.dts @@ -36,7 +36,7 @@ pinctrl-0 = <&pinctrl_leds_debug>; pinctrl-names = "default"; - debug { + led-debug { label = "zii:green:debug1"; gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 29148285f9fc..0fc9e6b8b05d 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -1224,7 +1224,7 @@ status = "disabled"; }; - sdma: sdma@30bd0000 { + sdma: dma-controller@30bd0000 { compatible = "fsl,imx7d-sdma", "fsl,imx35-sdma"; reg = <0x30bd0000 0x10000>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi index bcec98b96411..7f7d2d5122fb 100644 --- a/arch/arm/boot/dts/imx7ulp.dtsi +++ b/arch/arm/boot/dts/imx7ulp.dtsi @@ -328,8 +328,9 @@ compatible = "fsl,imx7ulp-lpi2c"; reg = <0x40a40000 0x10000>; interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&pcc3 IMX7ULP_CLK_LPI2C6>; - clock-names = "ipg"; + clocks = <&pcc3 IMX7ULP_CLK_LPI2C6>, + <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>; + clock-names = "per", "ipg"; assigned-clocks = <&pcc3 IMX7ULP_CLK_LPI2C6>; assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>; assigned-clock-rates = <48000000>; @@ -340,8 +341,9 @@ compatible = "fsl,imx7ulp-lpi2c"; reg = <0x40a50000 0x10000>; interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&pcc3 IMX7ULP_CLK_LPI2C7>; - clock-names = "ipg"; + clocks = <&pcc3 IMX7ULP_CLK_LPI2C7>, + <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>; + clock-names = "per", "ipg"; assigned-clocks = <&pcc3 IMX7ULP_CLK_LPI2C7>; assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>; assigned-clock-rates = <48000000>; diff --git a/arch/arm/boot/dts/integratorap-im-pd1.dts b/arch/arm/boot/dts/integratorap-im-pd1.dts index d47bfb66d069..cc514cf07bff 100644 --- a/arch/arm/boot/dts/integratorap-im-pd1.dts +++ b/arch/arm/boot/dts/integratorap-im-pd1.dts @@ -178,12 +178,12 @@ clock-names = "uartclk", "apb_pclk"; }; - ssp@300000 { + spi@300000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x00300000 0x1000>; interrupts-extended = <&impd1_vic 3>; clocks = <&impd1_sspclk>, <&sysclk>; - clock-names = "spiclk", "apb_pclk"; + clock-names = "sspclk", "apb_pclk"; }; impd1_gpio0: gpio@400000 { @@ -249,6 +249,7 @@ /* 640x480 16bpp @ 25.175MHz is 36827428 bytes/s */ max-memory-bandwidth = <40000000>; memory-region = <&impd1_ram>; + dma-ranges; port@0 { #address-cells = <1>; diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts index 9b652cc27b14..9148287fa0a9 100644 --- a/arch/arm/boot/dts/integratorap.dts +++ b/arch/arm/boot/dts/integratorap.dts @@ -160,6 +160,7 @@ pci: pciv3@62000000 { compatible = "arm,integrator-ap-pci", "v3,v360epc-pci"; + device_type = "pci"; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; @@ -261,7 +262,7 @@ lm0: bus@c0000000 { compatible = "simple-bus"; ranges = <0x00000000 0xc0000000 0x10000000>; - dma-ranges = <0x00000000 0x80000000 0x10000000>; + dma-ranges = <0x00000000 0xc0000000 0x10000000>; reg = <0xc0000000 0x10000000>; #address-cells = <1>; #size-cells = <1>; @@ -269,7 +270,7 @@ lm1: bus@d0000000 { compatible = "simple-bus"; ranges = <0x00000000 0xd0000000 0x10000000>; - dma-ranges = <0x00000000 0x80000000 0x10000000>; + dma-ranges = <0x00000000 0xd0000000 0x10000000>; reg = <0xd0000000 0x10000000>; #address-cells = <1>; #size-cells = <1>; @@ -277,7 +278,7 @@ lm2: bus@e0000000 { compatible = "simple-bus"; ranges = <0x00000000 0xe0000000 0x10000000>; - dma-ranges = <0x00000000 0x80000000 0x10000000>; + dma-ranges = <0x00000000 0xe0000000 0x10000000>; reg = <0xe0000000 0x10000000>; #address-cells = <1>; #size-cells = <1>; @@ -285,7 +286,7 @@ lm3: bus@f0000000 { compatible = "simple-bus"; ranges = <0x00000000 0xf0000000 0x10000000>; - dma-ranges = <0x00000000 0x80000000 0x10000000>; + dma-ranges = <0x00000000 0xf0000000 0x10000000>; reg = <0xf0000000 0x10000000>; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/kirkwood-6192.dtsi b/arch/arm/boot/dts/kirkwood-6192.dtsi index 396bcba08adb..705c0d7effed 100644 --- a/arch/arm/boot/dts/kirkwood-6192.dtsi +++ b/arch/arm/boot/dts/kirkwood-6192.dtsi @@ -26,12 +26,22 @@ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &intc 9>; + interrupt-names = "intx", "error"; + interrupts = <9>, <44>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc 0>, + <0 0 0 2 &pcie_intc 1>, + <0 0 0 3 &pcie_intc 2>, + <0 0 0 4 &pcie_intc 3>; marvell,pcie-port = <0>; marvell,pcie-lane = <0>; clocks = <&gate_clk 2>; status = "disabled"; + + pcie_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/kirkwood-6281.dtsi index faa05849a40d..8e311165fd13 100644 --- a/arch/arm/boot/dts/kirkwood-6281.dtsi +++ b/arch/arm/boot/dts/kirkwood-6281.dtsi @@ -26,12 +26,22 @@ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &intc 9>; + interrupt-names = "intx", "error"; + interrupts = <9>, <44>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc 0>, + <0 0 0 2 &pcie_intc 1>, + <0 0 0 3 &pcie_intc 2>, + <0 0 0 4 &pcie_intc 3>; marvell,pcie-port = <0>; marvell,pcie-lane = <0>; clocks = <&gate_clk 2>; status = "disabled"; + + pcie_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi index e84c54b77dea..e33723160ce7 100644 --- a/arch/arm/boot/dts/kirkwood-6282.dtsi +++ b/arch/arm/boot/dts/kirkwood-6282.dtsi @@ -30,12 +30,22 @@ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &intc 9>; + interrupt-names = "intx", "error"; + interrupts = <9>, <44>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie0_intc 0>, + <0 0 0 2 &pcie0_intc 1>, + <0 0 0 3 &pcie0_intc 2>, + <0 0 0 4 &pcie0_intc 3>; marvell,pcie-port = <0>; marvell,pcie-lane = <0>; clocks = <&gate_clk 2>; status = "disabled"; + + pcie0_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; pcie1: pcie@2,0 { @@ -48,12 +58,22 @@ ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 0x81000000 0 0 0x81000000 0x2 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &intc 10>; + interrupt-names = "intx", "error"; + interrupts = <10>, <45>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie1_intc 0>, + <0 0 0 2 &pcie1_intc 1>, + <0 0 0 3 &pcie1_intc 2>, + <0 0 0 4 &pcie1_intc 3>; marvell,pcie-port = <1>; marvell,pcie-lane = <0>; clocks = <&gate_clk 18>; status = "disabled"; + + pcie1_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-98dx4122.dtsi b/arch/arm/boot/dts/kirkwood-98dx4122.dtsi index 299c147298c3..c3469a2fc58a 100644 --- a/arch/arm/boot/dts/kirkwood-98dx4122.dtsi +++ b/arch/arm/boot/dts/kirkwood-98dx4122.dtsi @@ -26,12 +26,22 @@ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &intc 9>; + interrupt-names = "intx", "error"; + interrupts = <9>, <44>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc 0>, + <0 0 0 2 &pcie_intc 1>, + <0 0 0 3 &pcie_intc 2>, + <0 0 0 4 &pcie_intc 3>; marvell,pcie-port = <0>; marvell,pcie-lane = <0>; clocks = <&gate_clk 2>; status = "disabled"; + + pcie_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi index 7b151acb9984..88b70ba1c8fe 100644 --- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi +++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi @@ -10,6 +10,11 @@ ocp@f1000000 { pinctrl: pin-controller@10000 { + /* Non-default UART pins */ + pmx_uart0: pmx-uart0 { + marvell,pins = "mpp4", "mpp5"; + }; + pmx_power_hdd: pmx-power-hdd { marvell,pins = "mpp10"; marvell,function = "gpo"; @@ -213,22 +218,11 @@ &mdio { status = "okay"; - ethphy0: ethernet-phy@0 { - reg = <0>; - }; - ethphy1: ethernet-phy@8 { reg = <8>; }; }; -ð0 { - status = "okay"; - ethernet0-port@0 { - phy-handle = <ðphy0>; - }; -}; - ð1 { status = "okay"; ethernet1-port@0 { diff --git a/arch/arm/boot/dts/lan966x-pcb8290.dts b/arch/arm/boot/dts/lan966x-pcb8290.dts new file mode 100644 index 000000000000..77187f59f04d --- /dev/null +++ b/arch/arm/boot/dts/lan966x-pcb8290.dts @@ -0,0 +1,179 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * lan966x-pcb8290.dts - Device Tree file for LAN966X-PCB8290 board + * + * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries + * + * Author: Horatiu Vultur <horatiu.vultur@microchip.com> + */ +/dts-v1/; +#include "lan966x.dtsi" +#include "dt-bindings/phy/phy-lan966x-serdes.h" + +/ { + model = "Microchip EVB LAN9668"; + compatible = "microchip,lan9668-pcb8290", "microchip,lan9668", "microchip,lan966"; + + gpio-restart { + compatible = "gpio-restart"; + gpios = <&gpio 56 GPIO_ACTIVE_LOW>; + priority = <200>; + }; +}; + +&aes { + status = "disabled"; /* Reserved by secure OS */ +}; + +&gpio { + miim_a_pins: mdio-pins { + /* MDC, MDIO */ + pins = "GPIO_28", "GPIO_29"; + function = "miim_a"; + }; + + pps_out_pins: pps-out-pins { + /* 1pps output */ + pins = "GPIO_38"; + function = "ptpsync_3"; + }; + + ptp_ext_pins: ptp-ext-pins { + /* 1pps input */ + pins = "GPIO_35"; + function = "ptpsync_0"; + }; + + udc_pins: ucd-pins { + /* VBUS_DET B */ + pins = "GPIO_8"; + function = "usb_slave_b"; + }; +}; + +&mdio0 { + pinctrl-0 = <&miim_a_pins>; + pinctrl-names = "default"; + status = "okay"; + + ext_phy0: ethernet-phy@7 { + reg = <7>; + coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>; + }; + + ext_phy1: ethernet-phy@8 { + reg = <8>; + coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>; + }; + + ext_phy2: ethernet-phy@9 { + reg = <9>; + coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>; + }; + + ext_phy3: ethernet-phy@10 { + reg = <10>; + coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>; + }; + + ext_phy4: ethernet-phy@15 { + reg = <15>; + coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>; + }; + + ext_phy5: ethernet-phy@16 { + reg = <16>; + coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>; + }; + + ext_phy6: ethernet-phy@17 { + reg = <17>; + coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>; + }; + + ext_phy7: ethernet-phy@18 { + reg = <18>; + coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>; + }; +}; + +&port0 { + reg = <2>; + phy-handle = <&ext_phy2>; + phy-mode = "qsgmii"; + phys = <&serdes 0 SERDES6G(1)>; + status = "okay"; +}; + +&port1 { + reg = <3>; + phy-handle = <&ext_phy3>; + phy-mode = "qsgmii"; + phys = <&serdes 1 SERDES6G(1)>; + status = "okay"; +}; + +&port2 { + reg = <0>; + phy-handle = <&ext_phy0>; + phy-mode = "qsgmii"; + phys = <&serdes 2 SERDES6G(1)>; + status = "okay"; +}; + +&port3 { + reg = <1>; + phy-handle = <&ext_phy1>; + phy-mode = "qsgmii"; + phys = <&serdes 3 SERDES6G(1)>; + status = "okay"; +}; + +&port4 { + reg = <6>; + phy-handle = <&ext_phy6>; + phy-mode = "qsgmii"; + phys = <&serdes 4 SERDES6G(2)>; + status = "okay"; +}; + +&port5 { + reg = <7>; + phy-handle = <&ext_phy7>; + phy-mode = "qsgmii"; + phys = <&serdes 5 SERDES6G(2)>; + status = "okay"; +}; + +&port6 { + reg = <4>; + phy-handle = <&ext_phy4>; + phy-mode = "qsgmii"; + phys = <&serdes 6 SERDES6G(2)>; + status = "okay"; +}; + +&port7 { + reg = <5>; + phy-handle = <&ext_phy5>; + phy-mode = "qsgmii"; + phys = <&serdes 7 SERDES6G(2)>; + status = "okay"; +}; + +&serdes { + status = "okay"; +}; + +&switch { + pinctrl-0 = <&pps_out_pins>, <&ptp_ext_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&udc { + pinctrl-0 = <&udc_pins>; + pinctrl-names = "default"; + atmel,vbus-gpio = <&gpio 8 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/lan966x-pcb8291.dts b/arch/arm/boot/dts/lan966x-pcb8291.dts index 24d9055c4a08..f4f054cdf2a8 100644 --- a/arch/arm/boot/dts/lan966x-pcb8291.dts +++ b/arch/arm/boot/dts/lan966x-pcb8291.dts @@ -23,6 +23,38 @@ gpios = <&gpio 56 GPIO_ACTIVE_LOW>; priority = <200>; }; + + leds { + compatible = "gpio-leds"; + + led-s0-blue { + label = "s0:blue"; + gpios = <&sgpio_out 2 0 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-s0-green { + label = "s0:green"; + gpios = <&sgpio_out 2 1 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-s1-blue { + label = "s1:blue"; + gpios = <&sgpio_out 3 0 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-s1-green { + label = "s1:green"; + gpios = <&sgpio_out 3 1 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; +}; + +&aes { + status = "disabled"; /* Reserved by secure OS */ }; &gpio { diff --git a/arch/arm/boot/dts/lan966x-pcb8309.dts b/arch/arm/boot/dts/lan966x-pcb8309.dts index 05ce27ed5648..c436cd20d4b4 100644 --- a/arch/arm/boot/dts/lan966x-pcb8309.dts +++ b/arch/arm/boot/dts/lan966x-pcb8309.dts @@ -42,6 +42,34 @@ }; }; + leds { + compatible = "gpio-leds"; + + led-s0-green { + label = "s0:green"; + gpios = <&sgpio_out 2 0 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-s0-red { + label = "s0:red"; + gpios = <&sgpio_out 2 1 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-s1-green { + label = "s1:green"; + gpios = <&sgpio_out 3 0 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-s1-red { + label = "s1:red"; + gpios = <&sgpio_out 3 1 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + mux: mux-controller { compatible = "gpio-mux"; #mux-control-cells = <0>; @@ -69,6 +97,10 @@ }; }; +&aes { + status = "disabled"; /* Reserved by secure OS */ +}; + &flx3 { atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>; status = "okay"; diff --git a/arch/arm/boot/dts/lan966x.dtsi b/arch/arm/boot/dts/lan966x.dtsi index 894bf9da19a4..0bf818713422 100644 --- a/arch/arm/boot/dts/lan966x.dtsi +++ b/arch/arm/boot/dts/lan966x.dtsi @@ -541,13 +541,13 @@ phy0: ethernet-phy@1 { reg = <1>; - interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; phy1: ethernet-phy@2 { reg = <2>; - interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index fa761620f073..7c5510e34494 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -647,7 +647,7 @@ status = "disabled"; }; - edma0: edma@2c00000 { + edma0: dma-controller@2c00000 { #dma-cells = <2>; compatible = "fsl,vf610-edma"; reg = <0x0 0x2c00000 0x0 0x10000>, diff --git a/arch/arm/boot/dts/moxart-uc7112lx.dts b/arch/arm/boot/dts/moxart-uc7112lx.dts index eb5291b0ee3a..e07b807b4cec 100644 --- a/arch/arm/boot/dts/moxart-uc7112lx.dts +++ b/arch/arm/boot/dts/moxart-uc7112lx.dts @@ -79,7 +79,7 @@ clocks = <&ref12>; }; -&sdhci { +&mmc { status = "okay"; }; diff --git a/arch/arm/boot/dts/moxart.dtsi b/arch/arm/boot/dts/moxart.dtsi index f5f070a87482..764832ddfa78 100644 --- a/arch/arm/boot/dts/moxart.dtsi +++ b/arch/arm/boot/dts/moxart.dtsi @@ -93,8 +93,8 @@ clock-names = "PCLK"; }; - sdhci: sdhci@98e00000 { - compatible = "moxa,moxart-sdhci"; + mmc: mmc@98e00000 { + compatible = "moxa,moxart-mmc"; reg = <0x98e00000 0x5C>; interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_apb>; diff --git a/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts b/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts index ace8cea27949..215613c65250 100644 --- a/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts +++ b/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts @@ -8,6 +8,8 @@ #include "qcom-msm8226.dtsi" #include "qcom-pm8226.dtsi" +/delete-node/ &adsp_region; + / { model = "ASUS ZenWatch 2"; compatible = "asus,sparrow", "qcom,apq8026"; @@ -57,6 +59,10 @@ }; }; +&adsp { + status = "okay"; +}; + &blsp1_uart1 { status = "okay"; diff --git a/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts b/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts index 2b7e52fda6a7..193569f0ca5f 100644 --- a/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts +++ b/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts @@ -8,6 +8,8 @@ #include "qcom-msm8226.dtsi" #include "qcom-pm8226.dtsi" +/delete-node/ &adsp_region; + / { model = "LG G Watch R"; compatible = "lg,lenok", "qcom,apq8026"; @@ -23,6 +25,13 @@ stdout-path = "serial0:115200n8"; }; + reserved-memory { + adsp_region: adsp@3300000 { + reg = <0x03300000 0x1400000>; + no-map; + }; + }; + vreg_wlan: wlan-regulator { compatible = "regulator-fixed"; @@ -38,6 +47,10 @@ }; }; +&adsp { + status = "okay"; +}; + &blsp1_i2c1 { status = "okay"; diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts index 70a1dd629c7a..573e4dc66bb0 100644 --- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts @@ -159,6 +159,19 @@ }; }; + dragon_gsbi3_i2c_pins: gsbi3_i2c { + mux { + pins = "gpio43", "gpio44"; + function = "gsbi3"; + }; + pinconf { + pins = "gpio43", "gpio44"; + drive-strength = <8>; + /* These have external pull-up 2.2kOhm to 1.8V */ + bias-disable; + }; + }; + dragon_gsbi8_i2c_pins: gsbi8_i2c { mux { pins = "gpio64", "gpio65"; @@ -240,6 +253,22 @@ bias-pull-up; }; }; + + dragon_tma340_gpios: tma340 { + reset { + /* RESET line, TS_ATTN, WAKE_CTP */ + pins = "gpio58"; + function = "gpio"; + drive-strength = <6>; + bias-disable; + }; + irq { + pins = "gpio61"; /* IRQ line */ + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; }; qcom,ssbi@500000 { @@ -444,6 +473,45 @@ }; }; + gsbi@16200000 { + qcom,mode = <GSBI_PROT_I2C>; + status = "okay"; + + gsbi3_i2c: i2c@16280000 { + pinctrl-names = "default"; + pinctrl-0 = <&dragon_gsbi3_i2c_pins>; + status = "okay"; + + touchscreen@24 { + compatible = "cypress,cy8ctma340"; + reg = <0x24>; + /* Certainly we can do at least 400 kHz */ + clock-frequency = <400000>; + /* IRQ on GPIO61 called /CTP_INT */ + interrupt-parent = <&tlmm>; + interrupts = <61 IRQ_TYPE_EDGE_FALLING>; + /* + * The I2C bus is using a PCA9306 level translator from L16A + * to L2B so these two voltages are needed and L16A is + * kind of the IO voltage, however L16Aisn't really fed to + * the TMA340, which relies entirely on L2B (PM8901 L2). + */ + vcpin-supply = <&pm8058_l16>; + vdd-supply = <&pm8901_l2>; + /* GPIO58, called WAKE_CTP */ + reset-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; + touchscreen-size-x = <480>; + touchscreen-size-y = <800>; + active-interval-ms = <0>; + touch-timeout-ms = <255>; + lowpower-interval-ms = <10>; + bootloader-key = /bits/ 8 <0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07>; + pinctrl-names = "default"; + pinctrl-0 = <&dragon_tma340_gpios>; + }; + }; + }; + gsbi@19800000 { status = "okay"; qcom,mode = <GSBI_PROT_I2C>; @@ -634,7 +702,8 @@ bias-pull-down; }; l2 { - regulator-min-microvolt = <2850000>; + /* TMA340 requires strictly 3.3V */ + regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; bias-pull-down; }; diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts index e3bf57cd7423..529629a0a9dc 100644 --- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts @@ -215,7 +215,7 @@ vdda_refclk-supply = <&v3p3_fixed>; pinctrl-0 = <&pcie_pins>; pinctrl-names = "default"; - perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>; + perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>; }; amba { diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index 0322cb88d448..a7f90217661b 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -287,7 +287,7 @@ vdda_refclk-supply = <&ext_3p3v>; pinctrl-0 = <&pcie_pins>; pinctrl-names = "default"; - perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>; + perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>; }; qcom,ssbi@500000 { diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index ada4c828bf2f..942aa2278355 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -2,6 +2,7 @@ /dts-v1/; #include <dt-bindings/clock/qcom,gcc-msm8960.h> +#include <dt-bindings/clock/qcom,lcc-msm8960.h> #include <dt-bindings/reset/qcom,gcc-msm8960.h> #include <dt-bindings/clock/qcom,mmcc-msm8960.h> #include <dt-bindings/clock/qcom,rpmcc.h> @@ -815,6 +816,10 @@ #clock-cells = <1>; #power-domain-cells = <1>; #reset-cells = <1>; + clocks = <&cxo_board>, + <&pxo_board>, + <&lcc PLL4>; + clock-names = "cxo", "pxo", "pll4"; tsens: thermal-sensor { compatible = "qcom,msm8960-tsens"; @@ -834,6 +839,20 @@ reg = <0x28000000 0x1000>; #clock-cells = <1>; #reset-cells = <1>; + clocks = <&pxo_board>, + <&gcc PLL4_VOTE>, + <0>, + <0>, <0>, + <0>, <0>, + <0>; + clock-names = "pxo", + "pll4_vote", + "mi2s_codec_clk", + "codec_i2s_mic_codec_clk", + "spare_i2s_mic_codec_clk", + "codec_i2s_spkr_codec_clk", + "spare_i2s_spkr_codec_clk", + "pcm_codec_clk"; }; mmcc: clock-controller@4000000 { @@ -842,6 +861,22 @@ #clock-cells = <1>; #power-domain-cells = <1>; #reset-cells = <1>; + clocks = <&pxo_board>, + <&gcc PLL3>, + <&gcc PLL8_VOTE>, + <&dsi0_phy 1>, + <&dsi0_phy 0>, + <0>, + <0>, + <0>; + clock-names = "pxo", + "pll3", + "pll8_vote", + "dsi1pll", + "dsi1pllbyte", + "dsi2pll", + "dsi2pllbyte", + "hdmipll"; }; l2cc: clock-controller@2011000 { @@ -1384,7 +1419,7 @@ }; pcie: pci@1b500000 { - compatible = "qcom,pcie-apq8064", "snps,dw-pcie"; + compatible = "qcom,pcie-apq8064"; reg = <0x1b500000 0x1000>, <0x1b502000 0x80>, <0x1b600000 0x100>, diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts index 3051a861ff0c..91716298ec5e 100644 --- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts @@ -1,4 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 +#include <dt-bindings/gpio/gpio.h> #include "qcom-msm8974.dtsi" #include "qcom-pm8841.dtsi" #include "qcom-pm8941.dtsi" @@ -261,7 +262,7 @@ &sdhc_2 { status = "okay"; - cd-gpios = <&tlmm 62 0x1>; + cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; vmmc-supply = <&pm8941_l21>; vqmmc-supply = <&pm8941_l13>; diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index 72f9255855a1..f2fb7c975af8 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -239,6 +239,11 @@ reg = <0xf9011000 0x1000>; }; + sram@fc190000 { + compatible = "qcom,apq8084-rpm-stats"; + reg = <0xfc190000 0x10000>; + }; + qfprom: qfprom@fc4bc000 { compatible = "qcom,apq8084-qfprom", "qcom,qfprom"; reg = <0xfc4bc000 0x1000>; @@ -383,14 +388,9 @@ reg = <0xfc400000 0x4000>; }; - tcsr_mutex_regs: syscon@fd484000 { - compatible = "syscon"; - reg = <0xfd484000 0x2000>; - }; - - tcsr_mutex: hwlock { - compatible = "qcom,tcsr-mutex"; - syscon = <&tcsr_mutex_regs 0 0x80>; + tcsr_mutex: hwlock@fd484000 { + compatible = "qcom,apq8084-tcsr-mutex", "qcom,tcsr-mutex"; + reg = <0xfd484000 0x1000>; #hwlock-cells = <1>; }; @@ -422,26 +422,26 @@ mmc@f9824900 { compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; - reg-names = "hc_mem", "core_mem"; + reg-names = "hc", "core"; interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC1_APPS_CLK>, - <&gcc GCC_SDCC1_AHB_CLK>, + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, <&xo_board>; - clock-names = "core", "iface", "xo"; + clock-names = "iface", "core", "xo"; status = "disabled"; }; mmc@f98a4900 { compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; - reg-names = "hc_mem", "core_mem"; + reg-names = "hc", "core"; interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC2_APPS_CLK>, - <&gcc GCC_SDCC2_AHB_CLK>, + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, <&xo_board>; - clock-names = "core", "iface", "xo"; + clock-names = "iface", "core", "xo"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi index 03bb9e1768c4..0505270cf508 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi @@ -14,6 +14,7 @@ * */ +#include <dt-bindings/gpio/gpio.h> #include "qcom-ipq4019.dtsi" / { @@ -72,7 +73,7 @@ pinctrl-0 = <&spi_0_pins>; pinctrl-names = "default"; status = "okay"; - cs-gpios = <&tlmm 54 0>; + cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; mx25l25635e@0 { #address-cells = <1>; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi index 44a9597d8bfd..a63b3778636d 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi @@ -87,7 +87,7 @@ pinctrl-0 = <&spi_0_pins>; pinctrl-names = "default"; status = "okay"; - cs-gpios = <&tlmm 12 0>; + cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; flash@0 { #address-cells = <1>; @@ -100,7 +100,7 @@ pci@40000000 { status = "okay"; - perst-gpio = <&tlmm 38 0x1>; + perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; }; qpic-nand@79b0000 { diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts index c7a6e77da272..ea2987fcbff8 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 // Copyright (c) 2018, The Linux Foundation. All rights reserved. +#include <dt-bindings/gpio/gpio.h> #include "qcom-ipq4019-ap.dk07.1.dtsi" / { @@ -10,7 +11,7 @@ soc { pci@40000000 { status = "okay"; - perst-gpio = <&tlmm 38 0x1>; + perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; }; spi@78b6000 { @@ -50,7 +51,7 @@ pinctrl-0 = <&spi_0_pins>; pinctrl-names = "default"; status = "okay"; - cs-gpios = <&tlmm 12 0>; + cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; flash@0 { #address-cells = <1>; diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi index bb307b8f678c..b23591110bd2 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -224,12 +224,13 @@ sdhci: mmc@7824900 { compatible = "qcom,sdhci-msm-v4"; reg = <0x7824900 0x11c>, <0x7824000 0x800>; + reg-names = "hc", "core"; interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; bus-width = <8>; - clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>, + clocks = <&gcc GCC_SDCC1_AHB_CLK>, <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_DCD_XO_CLK>; - clock-names = "core", "iface", "xo"; + clock-names = "iface", "core", "xo"; status = "disabled"; }; @@ -412,7 +413,7 @@ }; pcie0: pci@40000000 { - compatible = "qcom,pcie-ipq4019", "snps,dw-pcie"; + compatible = "qcom,pcie-ipq4019"; reg = <0x40000000 0xf1d 0x40000f20 0xa8 0x80000 0x2000 diff --git a/arch/arm/boot/dts/qcom-ipq8062-smb208.dtsi b/arch/arm/boot/dts/qcom-ipq8062-smb208.dtsi new file mode 100644 index 000000000000..9d06255104c7 --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq8062-smb208.dtsi @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include "qcom-ipq8062.dtsi" + +&rpm { + smb208_regulators: regulators { + compatible = "qcom,rpm-smb208-regulators"; + + smb208_s1a: s1a { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1150000>; + + qcom,switch-mode-frequency = <1200000>; + }; + + smb208_s1b: s1b { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1150000>; + + qcom,switch-mode-frequency = <1200000>; + }; + + smb208_s2a: s2a { + regulator-min-microvolt = < 800000>; + regulator-max-microvolt = <1150000>; + + qcom,switch-mode-frequency = <1200000>; + }; + + smb208_s2b: s2b { + regulator-min-microvolt = < 800000>; + regulator-max-microvolt = <1150000>; + + qcom,switch-mode-frequency = <1200000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-ipq8062.dtsi b/arch/arm/boot/dts/qcom-ipq8062.dtsi new file mode 100644 index 000000000000..5d3ebd3e2e51 --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq8062.dtsi @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include "qcom-ipq8064-v2.0.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ8062"; + compatible = "qcom,ipq8062", "qcom,ipq8064"; +}; diff --git a/arch/arm/boot/dts/qcom-ipq8064-v2.0-smb208.dtsi b/arch/arm/boot/dts/qcom-ipq8064-v2.0-smb208.dtsi new file mode 100644 index 000000000000..0442580b22de --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq8064-v2.0-smb208.dtsi @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include "qcom-ipq8064-v2.0.dtsi" + +&rpm { + smb208_regulators: regulators { + compatible = "qcom,rpm-smb208-regulators"; + + smb208_s1a: s1a { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1150000>; + + qcom,switch-mode-frequency = <1200000>; + }; + + smb208_s1b: s1b { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1150000>; + + qcom,switch-mode-frequency = <1200000>; + }; + + smb208_s2a: s2a { + regulator-min-microvolt = < 800000>; + regulator-max-microvolt = <1250000>; + + qcom,switch-mode-frequency = <1200000>; + }; + + smb208_s2b: s2b { + regulator-min-microvolt = < 800000>; + regulator-max-microvolt = <1250000>; + + qcom,switch-mode-frequency = <1200000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi b/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi new file mode 100644 index 000000000000..2f117d576daf --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi @@ -0,0 +1,69 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include "qcom-ipq8064.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ8064-v2.0"; + + aliases { + serial0 = &gsbi4_serial; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + rsvd@41200000 { + reg = <0x41200000 0x300000>; + no-map; + }; + }; +}; + +&gsbi4 { + qcom,mode = <GSBI_PROT_I2C_UART>; + status = "okay"; + + serial@16340000 { + status = "okay"; + }; + /* + * The i2c device on gsbi4 should not be enabled. + * On ipq806x designs gsbi4 i2c is meant for exclusive + * RPM usage. Turning this on in kernel manifests as + * i2c failure for the RPM. + */ +}; + +&pcie0 { + compatible = "qcom,pcie-ipq8064-v2"; +}; + +&pcie1 { + compatible = "qcom,pcie-ipq8064-v2"; +}; + +&pcie2 { + compatible = "qcom,pcie-ipq8064-v2"; +}; + +&sata { + ports-implemented = <0x1>; +}; + +&ss_phy_0 { + qcom,rx-eq = <2>; + qcom,tx-deamp_3_5db = <32>; + qcom,mpll = <5>; +}; + +&ss_phy_1 { + qcom,rx-eq = <2>; + qcom,tx-deamp_3_5db = <32>; + qcom,mpll = <5>; +}; diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index c8337c870bdb..90c08b51680a 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -332,24 +332,64 @@ ranges; compatible = "simple-bus"; - lpass@28100000 { - compatible = "qcom,lpass-cpu"; - status = "disabled"; - clocks = <&lcc AHBIX_CLK>, - <&lcc MI2S_OSR_CLK>, - <&lcc MI2S_BIT_CLK>; - clock-names = "ahbix-clk", - "mi2s-osr-clk", - "mi2s-bit-clk"; - interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "lpass-irq-lpaif"; - reg = <0x28100000 0x10000>; - reg-names = "lpass-lpaif"; + stmmac_axi_setup: stmmac-axi-config { + snps,wr_osr_lmt = <7>; + snps,rd_osr_lmt = <7>; + snps,blen = <16 0 0 0 0 0 0>; + }; + + vsdcc_fixed: vsdcc-regulator { + compatible = "regulator-fixed"; + regulator-name = "SDCC Power"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + rpm: rpm@108000 { + compatible = "qcom,rpm-ipq8064"; + reg = <0x00108000 0x1000>; + qcom,ipc = <&l2cc 0x8 2>; + + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ack", "err", "wakeup"; + + clocks = <&gcc RPM_MSG_RAM_H_CLK>; + clock-names = "ram"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc"; + #clock-cells = <1>; + }; + }; + + qcom,ssbi@500000 { + compatible = "qcom,ssbi"; + reg = <0x00500000 0x1000>; + qcom,controller-type = "pmic-arbiter"; + }; + + qfprom: qfprom@700000 { + compatible = "qcom,ipq8064-qfprom", "qcom,qfprom"; + reg = <0x00700000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + speedbin_efuse: speedbin@c0 { + reg = <0xc0 0x4>; + }; + tsens_calib: calib@400 { + reg = <0x400 0xb>; + }; + tsens_calib_backup: calib_backup@410 { + reg = <0x410 0xb>; + }; }; qcom_pinmux: pinmux@800000 { compatible = "qcom,ipq8064-pinctrl"; - reg = <0x800000 0x4000>; + reg = <0x00800000 0x4000>; gpio-controller; gpio-ranges = <&qcom_pinmux 0 0 69>; @@ -471,6 +511,35 @@ }; }; + gcc: clock-controller@900000 { + compatible = "qcom,gcc-ipq8064", "syscon"; + clocks = <&pxo_board>, <&cxo_board>; + clock-names = "pxo", "cxo"; + reg = <0x00900000 0x4000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + + tsens: thermal-sensor@900000 { + compatible = "qcom,ipq8064-tsens"; + + nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>; + nvmem-cell-names = "calib", "calib_backup"; + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; + + #qcom,sensors = <11>; + #thermal-sensor-cells = <1>; + }; + }; + + sfpb_mutex: hwlock@1200600 { + compatible = "qcom,sfpb-mutex"; + reg = <0x01200600 0x100>; + + #hwlock-cells = <1>; + }; + intc: interrupt-controller@2000000 { compatible = "qcom,msm-qgic2"; interrupt-controller; @@ -500,46 +569,198 @@ cpu-offset = <0x80000>; }; + l2cc: clock-controller@2011000 { + compatible = "qcom,kpss-gcc", "syscon"; + reg = <0x02011000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + clock-output-names = "acpu_l2_aux"; + }; + acc0: clock-controller@2088000 { compatible = "qcom,kpss-acc-v1"; reg = <0x02088000 0x1000>, <0x02008000 0x1000>; }; + saw0: regulator@2089000 { + compatible = "qcom,saw2"; + reg = <0x02089000 0x1000>, <0x02009000 0x1000>; + regulator; + }; + acc1: clock-controller@2098000 { compatible = "qcom,kpss-acc-v1"; reg = <0x02098000 0x1000>, <0x02008000 0x1000>; }; - adm_dma: dma-controller@18300000 { - compatible = "qcom,adm"; - reg = <0x18300000 0x100000>; - interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; - #dma-cells = <1>; + saw1: regulator@2099000 { + compatible = "qcom,saw2"; + reg = <0x02099000 0x1000>, <0x02009000 0x1000>; + regulator; + }; - clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>; - clock-names = "core", "iface"; + nss_common: syscon@03000000 { + compatible = "syscon"; + reg = <0x03000000 0x0000FFFF>; + }; - resets = <&gcc ADM0_RESET>, - <&gcc ADM0_PBUS_RESET>, - <&gcc ADM0_C0_RESET>, - <&gcc ADM0_C1_RESET>, - <&gcc ADM0_C2_RESET>; - reset-names = "clk", "pbus", "c0", "c1", "c2"; - qcom,ee = <0>; + usb3_0: usb3@100f8800 { + compatible = "qcom,ipq8064-dwc3", "qcom,dwc3"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x100f8800 0x8000>; + clocks = <&gcc USB30_0_MASTER_CLK>; + clock-names = "core"; + + ranges; + + resets = <&gcc USB30_0_MASTER_RESET>; + reset-names = "master"; status = "disabled"; + + dwc3_0: dwc3@10000000 { + compatible = "snps,dwc3"; + reg = <0x10000000 0xcd00>; + interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>; + phys = <&hs_phy_0>, <&ss_phy_0>; + phy-names = "usb2-phy", "usb3-phy"; + dr_mode = "host"; + snps,dis_u3_susphy_quirk; + }; }; - saw0: regulator@2089000 { - compatible = "qcom,saw2"; - reg = <0x02089000 0x1000>, <0x02009000 0x1000>; - regulator; + hs_phy_0: phy@100f8800 { + compatible = "qcom,ipq806x-usb-phy-hs"; + reg = <0x100f8800 0x30>; + clocks = <&gcc USB30_0_UTMI_CLK>; + clock-names = "ref"; + #phy-cells = <0>; + + status = "disabled"; }; - saw1: regulator@2099000 { - compatible = "qcom,saw2"; - reg = <0x02099000 0x1000>, <0x02009000 0x1000>; - regulator; + ss_phy_0: phy@100f8830 { + compatible = "qcom,ipq806x-usb-phy-ss"; + reg = <0x100f8830 0x30>; + clocks = <&gcc USB30_0_MASTER_CLK>; + clock-names = "ref"; + #phy-cells = <0>; + + status = "disabled"; + }; + + usb3_1: usb3@110f8800 { + compatible = "qcom,ipq8064-dwc3", "qcom,dwc3"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x110f8800 0x8000>; + clocks = <&gcc USB30_1_MASTER_CLK>; + clock-names = "core"; + + ranges; + + resets = <&gcc USB30_1_MASTER_RESET>; + reset-names = "master"; + + status = "disabled"; + + dwc3_1: dwc3@11000000 { + compatible = "snps,dwc3"; + reg = <0x11000000 0xcd00>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + phys = <&hs_phy_1>, <&ss_phy_1>; + phy-names = "usb2-phy", "usb3-phy"; + dr_mode = "host"; + snps,dis_u3_susphy_quirk; + }; + }; + + hs_phy_1: phy@110f8800 { + compatible = "qcom,ipq806x-usb-phy-hs"; + reg = <0x110f8800 0x30>; + clocks = <&gcc USB30_1_UTMI_CLK>; + clock-names = "ref"; + #phy-cells = <0>; + + status = "disabled"; + }; + + ss_phy_1: phy@110f8830 { + compatible = "qcom,ipq806x-usb-phy-ss"; + reg = <0x110f8830 0x30>; + clocks = <&gcc USB30_1_MASTER_CLK>; + clock-names = "ref"; + #phy-cells = <0>; + + status = "disabled"; + }; + + sdcc3bam: dma-controller@12182000 { + compatible = "qcom,bam-v1.3.0"; + reg = <0x12182000 0x8000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc SDC3_H_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + sdcc1bam: dma-controller@12402000 { + compatible = "qcom,bam-v1.3.0"; + reg = <0x12402000 0x8000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc SDC1_H_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + amba: amba { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sdcc3: mmc@12180000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + status = "disabled"; + reg = <0x12180000 0x2000>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <192000000>; + sd-uhs-sdr104; + sd-uhs-ddr50; + vqmmc-supply = <&vsdcc_fixed>; + dmas = <&sdcc3bam 2>, <&sdcc3bam 1>; + dma-names = "tx", "rx"; + }; + + sdcc1: mmc@12400000 { + status = "disabled"; + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + reg = <0x12400000 0x2000>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + max-frequency = <96000000>; + non-removable; + cap-sd-highspeed; + cap-mmc-highspeed; + mmc-ddr-1_8v; + vmmc-supply = <&vsdcc_fixed>; + dmas = <&sdcc1bam 2>, <&sdcc1bam 1>; + dma-names = "tx", "rx"; + }; }; gsbi1: gsbi@12440000 { @@ -654,56 +875,6 @@ }; }; - gsbi5: gsbi@1a200000 { - compatible = "qcom,gsbi-v1.0.0"; - cell-index = <5>; - reg = <0x1a200000 0x100>; - clocks = <&gcc GSBI5_H_CLK>; - clock-names = "iface"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - status = "disabled"; - - syscon-tcsr = <&tcsr>; - - gsbi5_serial: serial@1a240000 { - compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; - reg = <0x1a240000 0x1000>, - <0x1a200000 0x1000>; - interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>; - clock-names = "core", "iface"; - status = "disabled"; - }; - - i2c@1a280000 { - compatible = "qcom,i2c-qup-v1.1.1"; - reg = <0x1a280000 0x1000>; - interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; - - clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>; - clock-names = "core", "iface"; - status = "disabled"; - - #address-cells = <1>; - #size-cells = <0>; - }; - - spi@1a280000 { - compatible = "qcom,spi-qup-v1.1.1"; - reg = <0x1a280000 0x1000>; - interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; - - clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>; - clock-names = "core", "iface"; - status = "disabled"; - - #address-cells = <1>; - #size-cells = <0>; - }; - }; - gsbi6: gsbi@16500000 { compatible = "qcom,gsbi-v1.0.0"; reg = <0x16500000 0x100>; @@ -784,6 +955,82 @@ }; }; + adm_dma: dma-controller@18300000 { + compatible = "qcom,adm"; + reg = <0x18300000 0x100000>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + + clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>; + clock-names = "core", "iface"; + + resets = <&gcc ADM0_RESET>, + <&gcc ADM0_PBUS_RESET>, + <&gcc ADM0_C0_RESET>, + <&gcc ADM0_C1_RESET>, + <&gcc ADM0_C2_RESET>; + reset-names = "clk", "pbus", "c0", "c1", "c2"; + qcom,ee = <0>; + + status = "disabled"; + }; + + gsbi5: gsbi@1a200000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <5>; + reg = <0x1a200000 0x100>; + clocks = <&gcc GSBI5_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + + #size-cells = <1>; + ranges; + status = "disabled"; + + syscon-tcsr = <&tcsr>; + + gsbi5_serial: serial@1a240000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x1a240000 0x1000>, + <0x1a200000 0x1000>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + i2c@1a280000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x1a280000 0x1000>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + + spi@1a280000 { + compatible = "qcom,spi-qup-v1.1.1"; + reg = <0x1a280000 0x1000>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + tcsr: syscon@1a400000 { + compatible = "qcom,tcsr-ipq8064", "syscon"; + reg = <0x1a400000 0x100>; + }; + rng@1a500000 { compatible = "qcom,prng"; reg = <0x1a500000 0x200>; @@ -791,17 +1038,6 @@ clock-names = "core"; }; - sata_phy: sata-phy@1b400000 { - compatible = "qcom,ipq806x-sata-phy"; - reg = <0x1b400000 0x200>; - - clocks = <&gcc SATA_PHY_CFG_CLK>; - clock-names = "cfg"; - - #phy-cells = <0>; - status = "disabled"; - }; - nand: nand-controller@1ac00000 { compatible = "qcom,ipq806x-nand"; reg = <0x1ac00000 0x800>; @@ -824,113 +1060,17 @@ status = "disabled"; }; - sata: sata@29000000 { - compatible = "qcom,ipq806x-ahci", "generic-ahci"; - reg = <0x29000000 0x180>; - - interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; - - clocks = <&gcc SFAB_SATA_S_H_CLK>, - <&gcc SATA_H_CLK>, - <&gcc SATA_A_CLK>, - <&gcc SATA_RXOOB_CLK>, - <&gcc SATA_PMALIVE_CLK>; - clock-names = "slave_face", "iface", "core", - "rxoob", "pmalive"; + sata_phy: sata-phy@1b400000 { + compatible = "qcom,ipq806x-sata-phy"; + reg = <0x1b400000 0x200>; - assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>; - assigned-clock-rates = <100000000>, <100000000>; + clocks = <&gcc SATA_PHY_CFG_CLK>; + clock-names = "cfg"; - phys = <&sata_phy>; - phy-names = "sata-phy"; + #phy-cells = <0>; status = "disabled"; }; - qcom,ssbi@500000 { - compatible = "qcom,ssbi"; - reg = <0x00500000 0x1000>; - qcom,controller-type = "pmic-arbiter"; - }; - - qfprom: qfprom@700000 { - compatible = "qcom,ipq8064-qfprom", "qcom,qfprom"; - reg = <0x00700000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - speedbin_efuse: speedbin@c0 { - reg = <0xc0 0x4>; - }; - tsens_calib: calib@400 { - reg = <0x400 0xb>; - }; - tsens_calib_backup: calib_backup@410 { - reg = <0x410 0xb>; - }; - }; - - gcc: clock-controller@900000 { - compatible = "qcom,gcc-ipq8064", "syscon"; - clocks = <&pxo_board>, <&cxo_board>; - clock-names = "pxo", "cxo"; - reg = <0x00900000 0x4000>; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - - tsens: thermal-sensor@900000 { - compatible = "qcom,ipq8064-tsens"; - - nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>; - nvmem-cell-names = "calib", "calib_backup"; - interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "uplow"; - - #qcom,sensors = <11>; - #thermal-sensor-cells = <1>; - }; - }; - - rpm: rpm@108000 { - compatible = "qcom,rpm-ipq8064"; - reg = <0x108000 0x1000>; - qcom,ipc = <&l2cc 0x8 2>; - - interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "ack", "err", "wakeup"; - - clocks = <&gcc RPM_MSG_RAM_H_CLK>; - clock-names = "ram"; - - rpmcc: clock-controller { - compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc"; - #clock-cells = <1>; - clocks = <&pxo_board>; - clock-names = "pxo"; - }; - }; - - tcsr: syscon@1a400000 { - compatible = "qcom,tcsr-ipq8064", "syscon"; - reg = <0x1a400000 0x100>; - }; - - l2cc: clock-controller@2011000 { - compatible = "qcom,kpss-gcc", "syscon"; - reg = <0x2011000 0x1000>; - clocks = <&gcc PLL8_VOTE>, <&pxo_board>; - clock-names = "pll8_vote", "pxo"; - clock-output-names = "acpu_l2_aux"; - }; - - lcc: clock-controller@28000000 { - compatible = "qcom,lcc-ipq8064"; - reg = <0x28000000 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; - }; - pcie0: pci@1b500000 { compatible = "qcom,pcie-ipq8064"; reg = <0x1b500000 0x1000 @@ -979,7 +1119,7 @@ pinctrl-names = "default"; status = "disabled"; - perst-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>; + perst-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>; }; pcie1: pci@1b700000 { @@ -1030,7 +1170,7 @@ pinctrl-names = "default"; status = "disabled"; - perst-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>; + perst-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>; }; pcie2: pci@1b900000 { @@ -1081,12 +1221,7 @@ pinctrl-names = "default"; status = "disabled"; - perst-gpio = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>; - }; - - nss_common: syscon@03000000 { - compatible = "syscon"; - reg = <0x03000000 0x0000FFFF>; + perst-gpios = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>; }; qsgmii_csr: syscon@1bb00000 { @@ -1094,10 +1229,48 @@ reg = <0x1bb00000 0x000001FF>; }; - stmmac_axi_setup: stmmac-axi-config { - snps,wr_osr_lmt = <7>; - snps,rd_osr_lmt = <7>; - snps,blen = <16 0 0 0 0 0 0>; + lcc: clock-controller@28000000 { + compatible = "qcom,lcc-ipq8064"; + reg = <0x28000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + lpass@28100000 { + compatible = "qcom,lpass-cpu"; + status = "disabled"; + clocks = <&lcc AHBIX_CLK>, + <&lcc MI2S_OSR_CLK>, + <&lcc MI2S_BIT_CLK>; + clock-names = "ahbix-clk", + "mi2s-osr-clk", + "mi2s-bit-clk"; + interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "lpass-irq-lpaif"; + reg = <0x28100000 0x10000>; + reg-names = "lpass-lpaif"; + }; + + sata: sata@29000000 { + compatible = "qcom,ipq806x-ahci", "generic-ahci"; + reg = <0x29000000 0x180>; + + interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc SFAB_SATA_S_H_CLK>, + <&gcc SATA_H_CLK>, + <&gcc SATA_A_CLK>, + <&gcc SATA_RXOOB_CLK>, + <&gcc SATA_PMALIVE_CLK>; + clock-names = "slave_face", "iface", "core", + "rxoob", "pmalive"; + + assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>; + assigned-clock-rates = <100000000>, <100000000>; + + phys = <&sata_phy>; + phy-names = "sata-phy"; + status = "disabled"; }; gmac0: ethernet@37000000 { @@ -1195,179 +1368,5 @@ status = "disabled"; }; - - hs_phy_0: phy@100f8800 { - compatible = "qcom,ipq806x-usb-phy-hs"; - reg = <0x100f8800 0x30>; - clocks = <&gcc USB30_0_UTMI_CLK>; - clock-names = "ref"; - #phy-cells = <0>; - - status = "disabled"; - }; - - ss_phy_0: phy@100f8830 { - compatible = "qcom,ipq806x-usb-phy-ss"; - reg = <0x100f8830 0x30>; - clocks = <&gcc USB30_0_MASTER_CLK>; - clock-names = "ref"; - #phy-cells = <0>; - - status = "disabled"; - }; - - usb3_0: usb3@100f8800 { - compatible = "qcom,ipq8064-dwc3", "qcom,dwc3"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x100f8800 0x8000>; - clocks = <&gcc USB30_0_MASTER_CLK>; - clock-names = "core"; - - ranges; - - resets = <&gcc USB30_0_MASTER_RESET>; - reset-names = "master"; - - status = "disabled"; - - dwc3_0: dwc3@10000000 { - compatible = "snps,dwc3"; - reg = <0x10000000 0xcd00>; - interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>; - phys = <&hs_phy_0>, <&ss_phy_0>; - phy-names = "usb2-phy", "usb3-phy"; - dr_mode = "host"; - snps,dis_u3_susphy_quirk; - }; - }; - - hs_phy_1: phy@110f8800 { - compatible = "qcom,ipq806x-usb-phy-hs"; - reg = <0x110f8800 0x30>; - clocks = <&gcc USB30_1_UTMI_CLK>; - clock-names = "ref"; - #phy-cells = <0>; - - status = "disabled"; - }; - - ss_phy_1: phy@110f8830 { - compatible = "qcom,ipq806x-usb-phy-ss"; - reg = <0x110f8830 0x30>; - clocks = <&gcc USB30_1_MASTER_CLK>; - clock-names = "ref"; - #phy-cells = <0>; - - status = "disabled"; - }; - - usb3_1: usb3@110f8800 { - compatible = "qcom,ipq8064-dwc3", "qcom,dwc3"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x110f8800 0x8000>; - clocks = <&gcc USB30_1_MASTER_CLK>; - clock-names = "core"; - - ranges; - - resets = <&gcc USB30_1_MASTER_RESET>; - reset-names = "master"; - - status = "disabled"; - - dwc3_1: dwc3@11000000 { - compatible = "snps,dwc3"; - reg = <0x11000000 0xcd00>; - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; - phys = <&hs_phy_1>, <&ss_phy_1>; - phy-names = "usb2-phy", "usb3-phy"; - dr_mode = "host"; - snps,dis_u3_susphy_quirk; - }; - }; - - vsdcc_fixed: vsdcc-regulator { - compatible = "regulator-fixed"; - regulator-name = "SDCC Power"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - sdcc1bam: dma-controller@12402000 { - compatible = "qcom,bam-v1.3.0"; - reg = <0x12402000 0x8000>; - interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc SDC1_H_CLK>; - clock-names = "bam_clk"; - #dma-cells = <1>; - qcom,ee = <0>; - }; - - sdcc3bam: dma-controller@12182000 { - compatible = "qcom,bam-v1.3.0"; - reg = <0x12182000 0x8000>; - interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc SDC3_H_CLK>; - clock-names = "bam_clk"; - #dma-cells = <1>; - qcom,ee = <0>; - }; - - amba: amba { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - sdcc1: mmc@12400000 { - status = "disabled"; - compatible = "arm,pl18x", "arm,primecell"; - arm,primecell-periphid = <0x00051180>; - reg = <0x12400000 0x2000>; - interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "cmd_irq"; - clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; - clock-names = "mclk", "apb_pclk"; - bus-width = <8>; - max-frequency = <96000000>; - non-removable; - cap-sd-highspeed; - cap-mmc-highspeed; - mmc-ddr-1_8v; - vmmc-supply = <&vsdcc_fixed>; - dmas = <&sdcc1bam 2>, <&sdcc1bam 1>; - dma-names = "tx", "rx"; - }; - - sdcc3: mmc@12180000 { - compatible = "arm,pl18x", "arm,primecell"; - arm,primecell-periphid = <0x00051180>; - status = "disabled"; - reg = <0x12180000 0x2000>; - interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "cmd_irq"; - clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; - clock-names = "mclk", "apb_pclk"; - bus-width = <8>; - cap-sd-highspeed; - cap-mmc-highspeed; - max-frequency = <192000000>; - sd-uhs-sdr104; - sd-uhs-ddr50; - vqmmc-supply = <&vsdcc_fixed>; - dmas = <&sdcc3bam 2>, <&sdcc3bam 1>; - dma-names = "tx", "rx"; - }; - }; - - sfpb_mutex: hwlock@1200600 { - compatible = "qcom,sfpb-mutex"; - reg = <0x01200600 0x100>; - - #hwlock-cells = <1>; - }; }; }; diff --git a/arch/arm/boot/dts/qcom-ipq8065-smb208.dtsi b/arch/arm/boot/dts/qcom-ipq8065-smb208.dtsi new file mode 100644 index 000000000000..803e6ff99ef8 --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq8065-smb208.dtsi @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include "qcom-ipq8065.dtsi" + +&rpm { + smb208_regulators: regulators { + compatible = "qcom,rpm-smb208-regulators"; + + smb208_s1a: s1a { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1150000>; + + qcom,switch-mode-frequency = <1200000>; + }; + + smb208_s1b: s1b { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1150000>; + + qcom,switch-mode-frequency = <1200000>; + }; + + smb208_s2a: s2a { + regulator-min-microvolt = <775000>; + regulator-max-microvolt = <1275000>; + + qcom,switch-mode-frequency = <1200000>; + }; + + smb208_s2b: s2b { + regulator-min-microvolt = <775000>; + regulator-max-microvolt = <1275000>; + + qcom,switch-mode-frequency = <1200000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-ipq8065.dtsi b/arch/arm/boot/dts/qcom-ipq8065.dtsi new file mode 100644 index 000000000000..ea49f6cc416d --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq8065.dtsi @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include "qcom-ipq8064-v2.0.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ8065"; + compatible = "qcom,ipq8065", "qcom,ipq8064"; +}; diff --git a/arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts b/arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts index d159188c8b95..290e1df631f0 100644 --- a/arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts +++ b/arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts @@ -18,8 +18,6 @@ }; }; -&soc { - serial@f991f000 { - status = "ok"; - }; +&blsp1_uart3 { + status = "ok"; }; diff --git a/arch/arm/boot/dts/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom-msm8226.dtsi index 0b5effdb269a..cf2d56929428 100644 --- a/arch/arm/boot/dts/qcom-msm8226.dtsi +++ b/arch/arm/boot/dts/qcom-msm8226.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8974.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/reset/qcom,gcc-msm8974.h> / { @@ -44,13 +45,6 @@ }; }; - tcsr_mutex: hwlock { - compatible = "qcom,tcsr-mutex"; - syscon = <&tcsr_mutex_block 0 0x80>; - - #hwlock-cells = <1>; - }; - reserved-memory { #address-cells = <1>; #size-cells = <1>; @@ -60,6 +54,11 @@ reg = <0x3000000 0x100000>; no-map; }; + + adsp_region: adsp@dc00000 { + reg = <0x0dc00000 0x1900000>; + no-map; + }; }; smd { @@ -115,6 +114,31 @@ hwlocks = <&tcsr_mutex 3>; }; + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupt-parent = <&intc>; + interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + soc: soc { compatible = "simple-bus"; #address-cells = <1>; @@ -137,14 +161,14 @@ sdhc_1: mmc@f9824900 { compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; - reg-names = "hc_mem", "core_mem"; + reg-names = "hc", "core"; interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC1_APPS_CLK>, - <&gcc GCC_SDCC1_AHB_CLK>, + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, <&xo_board>; - clock-names = "core", "iface", "xo"; + clock-names = "iface", "core", "xo"; pinctrl-names = "default"; pinctrl-0 = <&sdhc1_default_state>; status = "disabled"; @@ -153,14 +177,14 @@ sdhc_2: mmc@f98a4900 { compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; - reg-names = "hc_mem", "core_mem"; + reg-names = "hc", "core"; interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC2_APPS_CLK>, - <&gcc GCC_SDCC2_AHB_CLK>, + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, <&xo_board>; - clock-names = "core", "iface", "xo"; + clock-names = "iface", "core", "xo"; pinctrl-names = "default"; pinctrl-0 = <&sdhc2_default_state>; status = "disabled"; @@ -169,14 +193,14 @@ sdhc_3: mmc@f9864900 { compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf9864900 0x11c>, <0xf9864000 0x800>; - reg-names = "hc_mem", "core_mem"; + reg-names = "hc", "core"; interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC3_APPS_CLK>, - <&gcc GCC_SDCC3_AHB_CLK>, + clocks = <&gcc GCC_SDCC3_AHB_CLK>, + <&gcc GCC_SDCC3_APPS_CLK>, <&xo_board>; - clock-names = "core", "iface", "xo"; + clock-names = "iface", "core", "xo"; pinctrl-names = "default"; pinctrl-0 = <&sdhc3_default_state>; status = "disabled"; @@ -508,9 +532,44 @@ reg = <0xfc428000 0x4000>; }; - tcsr_mutex_block: syscon@fd484000 { - compatible = "syscon"; - reg = <0xfd484000 0x2000>; + tcsr_mutex: hwlock@fd484000 { + compatible = "qcom,msm8226-tcsr-mutex", "qcom,tcsr-mutex"; + reg = <0xfd484000 0x1000>; + #hwlock-cells = <1>; + }; + + adsp: remoteproc@fe200000 { + compatible = "qcom,msm8226-adsp-pil"; + reg = <0xfe200000 0x100>; + + interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; + + power-domains = <&rpmpd MSM8226_VDDCX>; + power-domain-names = "cx"; + + clocks = <&xo_board>; + clock-names = "xo"; + + memory-region = <&adsp_region>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + smd-edge { + interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 8>; + qcom,smd-edge = <1>; + + label = "lpass"; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts index 414280d9bdba..be18f1be29a1 100644 --- a/arch/arm/boot/dts/qcom-msm8660-surf.dts +++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts @@ -15,38 +15,23 @@ stdout-path = "serial0:115200n8"; }; - soc { - gsbi@19c00000 { - status = "okay"; - qcom,mode = <GSBI_PROT_I2C_UART>; - serial@19c40000 { - status = "okay"; - }; - }; - - /* Temporary fixed regulator */ - vsdcc_fixed: vsdcc-regulator { - compatible = "regulator-fixed"; - regulator-name = "SDCC Power"; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - regulator-always-on; - }; + /* Temporary fixed regulator */ + vsdcc_fixed: vsdcc-regulator { + compatible = "regulator-fixed"; + regulator-name = "SDCC Power"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + regulator-always-on; + }; +}; - amba { - /* eMMC */ - sdcc1: mmc@12400000 { - status = "okay"; - vmmc-supply = <&vsdcc_fixed>; - }; +&gsbi12 { + qcom,mode = <GSBI_PROT_I2C_UART>; + status = "okay"; +}; - /* External micro SD card */ - sdcc3: mmc@12180000 { - status = "okay"; - vmmc-supply = <&vsdcc_fixed>; - }; - }; - }; +&gsbi12_serial { + status = "okay"; }; &pm8058 { @@ -76,3 +61,15 @@ keypad,num-columns = <5>; }; }; + +/* eMMC */ +&sdcc1 { + vmmc-supply = <&vsdcc_fixed>; + status = "okay"; +}; + +/* External micro SD card */ +&sdcc3 { + vmmc-supply = <&vsdcc_fixed>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index 63a501c63cf8..ddce7d64ba99 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -50,22 +50,25 @@ }; clocks { - cxo_board { + cxo_board: cxo-board-clk { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <19200000>; + clock-output-names = "cxo_board"; }; - pxo_board: pxo_board { + pxo_board: pxo-board-clk { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <27000000>; + clock-output-names = "pxo_board"; }; - sleep_clk { + sleep-clk { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>; + clock-output-names = "sleep_clk"; }; }; @@ -129,6 +132,59 @@ #power-domain-cells = <1>; #reset-cells = <1>; reg = <0x900000 0x4000>; + clocks = <&pxo_board>, <&cxo_board>; + clock-names = "pxo", "cxo"; + }; + + gsbi1: gsbi@16000000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <12>; + reg = <0x16000000 0x100>; + clocks = <&gcc GSBI1_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + syscon-tcsr = <&tcsr>; + + status = "disabled"; + + gsbi1_spi: spi@16080000 { + compatible = "qcom,spi-qup-v1.1.1"; + reg = <0x16080000 0x1000>; + interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + gsbi3: gsbi@16200000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <12>; + reg = <0x16200000 0x100>; + clocks = <&gcc GSBI3_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + syscon-tcsr = <&tcsr>; + status = "disabled"; + + gsbi3_i2c: i2c@16280000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x16280000 0x1000>; + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI3_QUP_CLK>, <&gcc GSBI3_H_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; gsbi6: gsbi@16500000 { diff --git a/arch/arm/boot/dts/qcom-msm8916-samsung-e5.dts b/arch/arm/boot/dts/qcom-msm8916-samsung-e5.dts new file mode 100644 index 000000000000..c8d34de8a71e --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8916-samsung-e5.dts @@ -0,0 +1,3 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include "arm64/qcom/msm8916-samsung-e5.dts" +#include "qcom-msm8916-smp.dtsi" diff --git a/arch/arm/boot/dts/qcom-msm8916-samsung-e7.dts b/arch/arm/boot/dts/qcom-msm8916-samsung-e7.dts new file mode 100644 index 000000000000..85be286c8608 --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8916-samsung-e7.dts @@ -0,0 +1,3 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include "arm64/qcom/msm8916-samsung-e7.dts" +#include "qcom-msm8916-smp.dtsi" diff --git a/arch/arm/boot/dts/qcom-msm8916-samsung-grandmax.dts b/arch/arm/boot/dts/qcom-msm8916-samsung-grandmax.dts new file mode 100644 index 000000000000..d3abe0536238 --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8916-samsung-grandmax.dts @@ -0,0 +1,3 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include "arm64/qcom/msm8916-samsung-grandmax.dts" +#include "qcom-msm8916-smp.dtsi" diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts index d1fd0fe12ffe..9157e3c4f48f 100644 --- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts +++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts @@ -15,318 +15,6 @@ stdout-path = "serial0:115200n8"; }; - soc { - gsbi@16400000 { - status = "okay"; - qcom,mode = <GSBI_PROT_I2C_UART>; - serial@16440000 { - status = "okay"; - }; - }; - - amba { - /* eMMC */ - sdcc1: mmc@12400000 { - status = "okay"; - }; - - /* External micro SD card */ - sdcc3: mmc@12180000 { - status = "okay"; - }; - }; - - rpm@108000 { - regulators { - compatible = "qcom,rpm-pm8921-regulators"; - vin_lvs1_3_6-supply = <&pm8921_s4>; - vin_lvs2-supply = <&pm8921_s4>; - vin_lvs4_5_7-supply = <&pm8921_s4>; - vdd_ncp-supply = <&pm8921_l6>; - vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; - vdd_l21_l23_l29-supply = <&pm8921_s8>; - vdd_l24-supply = <&pm8921_s1>; - vdd_l25-supply = <&pm8921_s1>; - vdd_l27-supply = <&pm8921_s7>; - vdd_l28-supply = <&pm8921_s7>; - - /* Buck SMPS */ - pm8921_s1: s1 { - regulator-always-on; - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - qcom,switch-mode-frequency = <3200000>; - bias-pull-down; - }; - - pm8921_s2: s2 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - qcom,switch-mode-frequency = <1600000>; - bias-pull-down; - }; - - pm8921_s3: s3 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1150000>; - qcom,switch-mode-frequency = <4800000>; - bias-pull-down; - }; - - pm8921_s4: s4 { - regulator-always-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - qcom,switch-mode-frequency = <1600000>; - bias-pull-down; - qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>; - }; - - pm8921_s7: s7 { - regulator-min-microvolt = <1150000>; - regulator-max-microvolt = <1150000>; - qcom,switch-mode-frequency = <3200000>; - bias-pull-down; - }; - - pm8921_s8: s8 { - regulator-always-on; - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - qcom,switch-mode-frequency = <1600000>; - bias-pull-down; - }; - - /* PMOS LDO */ - pm8921_l1: l1 { - regulator-always-on; - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - bias-pull-down; - }; - - pm8921_l2: l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - bias-pull-down; - }; - - pm8921_l3: l3 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - bias-pull-down; - }; - - pm8921_l4: l4 { - regulator-always-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - bias-pull-down; - }; - - pm8921_l5: l5 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - bias-pull-down; - }; - - pm8921_l6: l6 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - bias-pull-down; - }; - - pm8921_l7: l7 { - regulator-always-on; - regulator-min-microvolt = <1850000>; - regulator-max-microvolt = <2950000>; - bias-pull-down; - }; - - pm8921_l8: l8 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <3000000>; - bias-pull-down; - }; - - pm8921_l9: l9 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - bias-pull-down; - }; - - pm8921_l10: l10 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - bias-pull-down; - }; - - pm8921_l11: l11 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - bias-pull-down; - }; - - pm8921_l12: l12 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - bias-pull-down; - }; - - pm8921_l14: l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - bias-pull-down; - }; - - pm8921_l15: l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - bias-pull-down; - }; - - pm8921_l16: l16 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - bias-pull-down; - }; - - pm8921_l17: l17 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - bias-pull-down; - }; - - pm8921_l18: l18 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - bias-pull-down; - }; - - pm8921_l21: l21 { - regulator-min-microvolt = <1900000>; - regulator-max-microvolt = <1900000>; - bias-pull-down; - }; - - pm8921_l22: l22 { - regulator-min-microvolt = <2750000>; - regulator-max-microvolt = <2750000>; - bias-pull-down; - }; - - pm8921_l23: l23 { - regulator-always-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - bias-pull-down; - }; - - pm8921_l24: l24 { - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1150000>; - bias-pull-down; - }; - - pm8921_l25: l25 { - regulator-always-on; - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <1250000>; - bias-pull-down; - }; - - /* Low Voltage Switch */ - pm8921_lvs1: lvs1 { - bias-pull-down; - }; - - pm8921_lvs2: lvs2 { - bias-pull-down; - }; - - pm8921_lvs3: lvs3 { - bias-pull-down; - }; - - pm8921_lvs4: lvs4 { - bias-pull-down; - }; - - pm8921_lvs5: lvs5 { - bias-pull-down; - }; - - pm8921_lvs6: lvs6 { - bias-pull-down; - }; - - pm8921_lvs7: lvs7 { - bias-pull-down; - }; - - pm8921_ncp: ncp { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - qcom,switch-mode-frequency = <1600000>; - }; - }; - }; - - gsbi@16000000 { - status = "okay"; - qcom,mode = <GSBI_PROT_SPI>; - pinctrl-names = "default"; - pinctrl-0 = <&spi1_default>; - spi@16080000 { - status = "okay"; - ethernet@0 { - compatible = "micrel,ks8851"; - reg = <0>; - interrupt-parent = <&msmgpio>; - interrupts = <90 8>; - spi-max-frequency = <5400000>; - vdd-supply = <&ext_l2>; - vdd-io-supply = <&pm8921_lvs6>; - reset-gpios = <&msmgpio 89 0>; - }; - }; - }; - - pinctrl@800000 { - spi1_default: spi1_default { - mux { - pins = "gpio6", "gpio7", "gpio9"; - function = "gsbi1"; - }; - - mosi { - pins = "gpio6"; - drive-strength = <12>; - bias-disable; - }; - - miso { - pins = "gpio7"; - drive-strength = <12>; - bias-disable; - }; - - cs { - pins = "gpio8"; - drive-strength = <12>; - bias-disable; - output-low; - }; - - clk { - pins = "gpio9"; - drive-strength = <12>; - bias-disable; - }; - }; - }; - }; - regulators { compatible = "simple-bus"; @@ -340,6 +28,71 @@ }; }; +&gsbi1 { + qcom,mode = <GSBI_PROT_SPI>; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_default>; + status = "okay"; +}; + +&gsbi1_spi { + status = "okay"; + + ethernet@0 { + compatible = "micrel,ks8851"; + reg = <0>; + interrupt-parent = <&msmgpio>; + interrupts = <90 8>; + spi-max-frequency = <5400000>; + vdd-supply = <&ext_l2>; + vdd-io-supply = <&pm8921_lvs6>; + reset-gpios = <&msmgpio 89 0>; + }; +}; + +&gsbi5 { + qcom,mode = <GSBI_PROT_I2C_UART>; + status = "okay"; +}; + +&gsbi5_serial { + status = "okay"; +}; + +&msmgpio { + spi1_default: spi1_default { + mux { + pins = "gpio6", "gpio7", "gpio9"; + function = "gsbi1"; + }; + + mosi { + pins = "gpio6"; + drive-strength = <12>; + bias-disable; + }; + + miso { + pins = "gpio7"; + drive-strength = <12>; + bias-disable; + }; + + cs { + pins = "gpio8"; + drive-strength = <12>; + bias-disable; + output-low; + }; + + clk { + pins = "gpio9"; + drive-strength = <12>; + bias-disable; + }; + }; +}; + &pmicintc { keypad@148 { linux,keymap = < @@ -352,3 +105,249 @@ keypad,num-columns = <5>; }; }; + +&rpm { + regulators { + compatible = "qcom,rpm-pm8921-regulators"; + vin_lvs1_3_6-supply = <&pm8921_s4>; + vin_lvs2-supply = <&pm8921_s4>; + vin_lvs4_5_7-supply = <&pm8921_s4>; + vdd_ncp-supply = <&pm8921_l6>; + vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; + vdd_l21_l23_l29-supply = <&pm8921_s8>; + vdd_l24-supply = <&pm8921_s1>; + vdd_l25-supply = <&pm8921_s1>; + vdd_l27-supply = <&pm8921_s7>; + vdd_l28-supply = <&pm8921_s7>; + + /* Buck SMPS */ + pm8921_s1: s1 { + regulator-always-on; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + qcom,switch-mode-frequency = <3200000>; + bias-pull-down; + }; + + pm8921_s2: s2 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + pm8921_s3: s3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1150000>; + qcom,switch-mode-frequency = <4800000>; + bias-pull-down; + }; + + pm8921_s4: s4 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>; + }; + + pm8921_s7: s7 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + qcom,switch-mode-frequency = <3200000>; + bias-pull-down; + }; + + pm8921_s8: s8 { + regulator-always-on; + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + /* PMOS LDO */ + pm8921_l1: l1 { + regulator-always-on; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + bias-pull-down; + }; + + pm8921_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + + pm8921_l3: l3 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + bias-pull-down; + }; + + pm8921_l4: l4 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + pm8921_l5: l5 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + pm8921_l6: l6 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + pm8921_l7: l7 { + regulator-always-on; + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + pm8921_l8: l8 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; + }; + + pm8921_l9: l9 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; + }; + + pm8921_l10: l10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; + }; + + pm8921_l11: l11 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + bias-pull-down; + }; + + pm8921_l12: l12 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + + pm8921_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + pm8921_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + pm8921_l16: l16 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + bias-pull-down; + }; + + pm8921_l17: l17 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + pm8921_l18: l18 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + bias-pull-down; + }; + + pm8921_l21: l21 { + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <1900000>; + bias-pull-down; + }; + + pm8921_l22: l22 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + bias-pull-down; + }; + + pm8921_l23: l23 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + pm8921_l24: l24 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1150000>; + bias-pull-down; + }; + + pm8921_l25: l25 { + regulator-always-on; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + bias-pull-down; + }; + + /* Low Voltage Switch */ + pm8921_lvs1: lvs1 { + bias-pull-down; + }; + + pm8921_lvs2: lvs2 { + bias-pull-down; + }; + + pm8921_lvs3: lvs3 { + bias-pull-down; + }; + + pm8921_lvs4: lvs4 { + bias-pull-down; + }; + + pm8921_lvs5: lvs5 { + bias-pull-down; + }; + + pm8921_lvs6: lvs6 { + bias-pull-down; + }; + + pm8921_lvs7: lvs7 { + bias-pull-down; + }; + + pm8921_ncp: ncp { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <1600000>; + }; + }; +}; + +/* eMMC */ +&sdcc1 { + status = "okay"; +}; + +/* External micro SD card */ +&sdcc3 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi index 19554f3b5196..c5740da3754c 100644 --- a/arch/arm/boot/dts/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi @@ -3,6 +3,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8960.h> +#include <dt-bindings/clock/qcom,lcc-msm8960.h> #include <dt-bindings/mfd/qcom-rpm.h> #include <dt-bindings/soc/qcom,gsbi.h> @@ -56,14 +57,14 @@ }; clocks { - cxo_board { + cxo_board: cxo_board { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <19200000>; clock-output-names = "cxo_board"; }; - pxo_board { + pxo_board: pxo_board { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <27000000>; @@ -130,6 +131,10 @@ #power-domain-cells = <1>; #reset-cells = <1>; reg = <0x900000 0x4000>; + clocks = <&cxo_board>, + <&pxo_board>, + <&lcc PLL4>; + clock-names = "cxo", "pxo", "pll4"; }; lcc: clock-controller@28000000 { @@ -137,6 +142,20 @@ reg = <0x28000000 0x1000>; #clock-cells = <1>; #reset-cells = <1>; + clocks = <&pxo_board>, + <&gcc PLL4_VOTE>, + <0>, + <0>, <0>, + <0>, <0>, + <0>; + clock-names = "pxo", + "pll4_vote", + "mi2s_codec_clk", + "codec_i2s_mic_codec_clk", + "spare_i2s_mic_codec_clk", + "codec_i2s_spkr_codec_clk", + "spare_i2s_spkr_codec_clk", + "pcm_codec_clk"; }; clock-controller@4000000 { @@ -145,6 +164,22 @@ #clock-cells = <1>; #power-domain-cells = <1>; #reset-cells = <1>; + clocks = <&pxo_board>, + <&gcc PLL3>, + <&gcc PLL8_VOTE>, + <0>, + <0>, + <0>, + <0>, + <0>; + clock-names = "pxo", + "pll3", + "pll8_vote", + "dsi1pll", + "dsi1pllbyte", + "dsi2pll", + "dsi2pllbyte", + "hdmipll"; }; l2cc: clock-controller@2011000 { @@ -152,7 +187,7 @@ reg = <0x2011000 0x1000>; }; - rpm@108000 { + rpm: rpm@108000 { compatible = "qcom,rpm-msm8960"; reg = <0x108000 0x1000>; qcom,ipc = <&l2cc 0x8 2>; @@ -307,7 +342,7 @@ reg = <0x1a400000 0x100>; }; - gsbi@16000000 { + gsbi1: gsbi@16000000 { compatible = "qcom,gsbi-v1.0.0"; cell-index = <1>; reg = <0x16000000 0x100>; @@ -317,7 +352,7 @@ #size-cells = <1>; ranges; - spi@16080000 { + gsbi1_spi: spi@16080000 { compatible = "qcom,spi-qup-v1.1.1"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts index ec5d340562b6..6daceaa87802 100644 --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -175,7 +175,7 @@ ak8963@f { compatible = "asahi-kasei,ak8963"; reg = <0x0f>; - gpios = <&tlmm 67 0>; + gpios = <&tlmm 67 GPIO_ACTIVE_HIGH>; vid-supply = <&pm8941_lvs1>; vdd-supply = <&pm8941_l17>; }; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 8baca2a77717..7a9be0acf3f5 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -439,14 +439,14 @@ sdhc_1: mmc@f9824900 { compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; - reg-names = "hc_mem", "core_mem"; + reg-names = "hc", "core"; interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC1_APPS_CLK>, - <&gcc GCC_SDCC1_AHB_CLK>, + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, <&xo_board>; - clock-names = "core", "iface", "xo"; + clock-names = "iface", "core", "xo"; bus-width = <8>; non-removable; @@ -456,14 +456,14 @@ sdhc_3: mmc@f9864900 { compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf9864900 0x11c>, <0xf9864000 0x800>; - reg-names = "hc_mem", "core_mem"; + reg-names = "hc", "core"; interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC3_APPS_CLK>, - <&gcc GCC_SDCC3_AHB_CLK>, + clocks = <&gcc GCC_SDCC3_AHB_CLK>, + <&gcc GCC_SDCC3_APPS_CLK>, <&xo_board>; - clock-names = "core", "iface", "xo"; + clock-names = "iface", "core", "xo"; bus-width = <4>; #address-cells = <1>; @@ -475,14 +475,14 @@ sdhc_2: mmc@f98a4900 { compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; - reg-names = "hc_mem", "core_mem"; + reg-names = "hc", "core"; interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC2_APPS_CLK>, - <&gcc GCC_SDCC2_AHB_CLK>, + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, <&xo_board>; - clock-names = "core", "iface", "xo"; + clock-names = "iface", "core", "xo"; bus-width = <4>; #address-cells = <1>; @@ -762,6 +762,11 @@ }; }; + sram@fc190000 { + compatible = "qcom,msm8974-rpm-stats"; + reg = <0xfc190000 0x10000>; + }; + etf@fc307000 { compatible = "arm,coresight-tmc", "arm,primecell"; reg = <0xfc307000 0x1000>; diff --git a/arch/arm/boot/dts/qcom-msm8974pro.dtsi b/arch/arm/boot/dts/qcom-msm8974pro.dtsi index 1e882e16a221..58df6e75ab6d 100644 --- a/arch/arm/boot/dts/qcom-msm8974pro.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974pro.dtsi @@ -10,10 +10,10 @@ }; &sdhc_1 { - clocks = <&gcc GCC_SDCC1_APPS_CLK>, - <&gcc GCC_SDCC1_AHB_CLK>, + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, <&xo_board>, <&gcc GCC_SDCC1_CDCCAL_FF_CLK>, <&gcc GCC_SDCC1_CDCCAL_SLEEP_CLK>; - clock-names = "core", "iface", "xo", "cal", "sleep"; + clock-names = "iface", "core", "xo", "cal", "sleep"; }; diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi index 59d0cde63251..9cd49deb9fa7 100644 --- a/arch/arm/boot/dts/qcom-pm8941.dtsi +++ b/arch/arm/boot/dts/qcom-pm8941.dtsi @@ -93,7 +93,7 @@ #thermal-sensor-cells = <0>; }; - pm8941_vadc: vadc@3100 { + pm8941_vadc: adc@3100 { compatible = "qcom,spmi-vadc"; reg = <0x3100>; interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; @@ -144,7 +144,7 @@ #address-cells = <1>; #size-cells = <0>; - pm8941_lpg: lpg { + pm8941_lpg: pwm { compatible = "qcom,pm8941-lpg"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom-pma8084.dtsi index 7b8a8d9695da..e77602e9f95c 100644 --- a/arch/arm/boot/dts/qcom-pma8084.dtsi +++ b/arch/arm/boot/dts/qcom-pma8084.dtsi @@ -56,7 +56,7 @@ io-channel-names = "thermal"; }; - pma8084_vadc: vadc@3100 { + pma8084_vadc: adc@3100 { compatible = "qcom,spmi-vadc"; reg = <0x3100>; interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; diff --git a/arch/arm/boot/dts/qcom-pmx55.dtsi b/arch/arm/boot/dts/qcom-pmx55.dtsi index 9de7578a4c5f..e1b869480bbd 100644 --- a/arch/arm/boot/dts/qcom-pmx55.dtsi +++ b/arch/arm/boot/dts/qcom-pmx55.dtsi @@ -16,7 +16,7 @@ #address-cells = <1>; #size-cells = <0>; - power-on@800 { + pon@800 { compatible = "qcom,pm8916-pon"; reg = <0x0800>; diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi index 8daefd50217a..4cd405db5500 100644 --- a/arch/arm/boot/dts/qcom-sdx65.dtsi +++ b/arch/arm/boot/dts/qcom-sdx65.dtsi @@ -334,7 +334,7 @@ sdhc_1: mmc@8804000 { compatible = "qcom,sdx65-sdhci", "qcom,sdhci-msm-v5"; reg = <0x08804000 0x1000>; - reg-names = "hc_mem"; + reg-names = "hc"; interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; diff --git a/arch/arm/boot/dts/r8a7742.dtsi b/arch/arm/boot/dts/r8a7742.dtsi index 420e0b3259d4..758a1bf02fae 100644 --- a/arch/arm/boot/dts/r8a7742.dtsi +++ b/arch/arm/boot/dts/r8a7742.dtsi @@ -633,7 +633,7 @@ status = "disabled"; }; - usbphy: usb-phy@e6590100 { + usbphy: usb-phy-controller@e6590100 { compatible = "renesas,usb-phy-r8a7742", "renesas,rcar-gen2-usb-phy"; reg = <0 0xe6590100 0 0x100>; @@ -645,11 +645,11 @@ resets = <&cpg 704>; status = "disabled"; - usb0: usb-channel@0 { + usb0: usb-phy@0 { reg = <0>; #phy-cells = <1>; }; - usb2: usb-channel@2 { + usb2: usb-phy@2 { reg = <2>; #phy-cells = <1>; }; diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi index c0c145a5fe8d..20f1d98a048d 100644 --- a/arch/arm/boot/dts/r8a7743.dtsi +++ b/arch/arm/boot/dts/r8a7743.dtsi @@ -584,7 +584,7 @@ status = "disabled"; }; - usbphy: usb-phy@e6590100 { + usbphy: usb-phy-controller@e6590100 { compatible = "renesas,usb-phy-r8a7743", "renesas,rcar-gen2-usb-phy"; reg = <0 0xe6590100 0 0x100>; @@ -596,11 +596,11 @@ resets = <&cpg 704>; status = "disabled"; - usb0: usb-channel@0 { + usb0: usb-phy@0 { reg = <0>; #phy-cells = <1>; }; - usb2: usb-channel@2 { + usb2: usb-phy@2 { reg = <2>; #phy-cells = <1>; }; diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi index 3f4fb53dd6df..96b2d5a4e8f6 100644 --- a/arch/arm/boot/dts/r8a7744.dtsi +++ b/arch/arm/boot/dts/r8a7744.dtsi @@ -584,7 +584,7 @@ status = "disabled"; }; - usbphy: usb-phy@e6590100 { + usbphy: usb-phy-controller@e6590100 { compatible = "renesas,usb-phy-r8a7744", "renesas,rcar-gen2-usb-phy"; reg = <0 0xe6590100 0 0x100>; @@ -596,11 +596,11 @@ resets = <&cpg 704>; status = "disabled"; - usb0: usb-channel@0 { + usb0: usb-phy@0 { reg = <0>; #phy-cells = <1>; }; - usb2: usb-channel@2 { + usb2: usb-phy@2 { reg = <2>; #phy-cells = <1>; }; diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi index fe8e98a66d93..afc902e532d8 100644 --- a/arch/arm/boot/dts/r8a7745.dtsi +++ b/arch/arm/boot/dts/r8a7745.dtsi @@ -525,7 +525,7 @@ status = "disabled"; }; - usbphy: usb-phy@e6590100 { + usbphy: usb-phy-controller@e6590100 { compatible = "renesas,usb-phy-r8a7745", "renesas,rcar-gen2-usb-phy"; reg = <0 0xe6590100 0 0x100>; @@ -537,11 +537,11 @@ resets = <&cpg 704>; status = "disabled"; - usb0: usb-channel@0 { + usb0: usb-phy@0 { reg = <0>; #phy-cells = <1>; }; - usb2: usb-channel@2 { + usb2: usb-phy@2 { reg = <2>; #phy-cells = <1>; }; diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi index c90f2a270214..a5cf663a0118 100644 --- a/arch/arm/boot/dts/r8a77470.dtsi +++ b/arch/arm/boot/dts/r8a77470.dtsi @@ -357,7 +357,7 @@ status = "disabled"; }; - usbphy0: usb-phy@e6590100 { + usbphy0: usb-phy-controller@e6590100 { compatible = "renesas,usb-phy-r8a77470", "renesas,rcar-gen2-usb-phy"; reg = <0 0xe6590100 0 0x100>; @@ -369,7 +369,7 @@ resets = <&cpg 704>; status = "disabled"; - usb0: usb-channel@0 { + usb0: usb-phy@0 { reg = <0>; #phy-cells = <1>; }; @@ -393,7 +393,7 @@ status = "disabled"; }; - usbphy1: usb-phy@e6598100 { + usbphy1: usb-phy-controller@e6598100 { compatible = "renesas,usb-phy-r8a77470", "renesas,rcar-gen2-usb-phy"; reg = <0 0xe6598100 0 0x100>; @@ -405,7 +405,7 @@ resets = <&cpg 706>; status = "disabled"; - usb1: usb-channel@0 { + usb1: usb-phy@0 { reg = <0>; #phy-cells = <1>; }; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index a640488d513b..db171e3c62f2 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -654,7 +654,7 @@ status = "disabled"; }; - usbphy: usb-phy@e6590100 { + usbphy: usb-phy-controller@e6590100 { compatible = "renesas,usb-phy-r8a7790", "renesas,rcar-gen2-usb-phy"; reg = <0 0xe6590100 0 0x100>; @@ -666,11 +666,11 @@ resets = <&cpg 704>; status = "disabled"; - usb0: usb-channel@0 { + usb0: usb-phy@0 { reg = <0>; #phy-cells = <1>; }; - usb2: usb-channel@2 { + usb2: usb-phy@2 { reg = <2>; #phy-cells = <1>; }; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 542ed0a71872..d8f91d9f42ae 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -608,7 +608,7 @@ status = "disabled"; }; - usbphy: usb-phy@e6590100 { + usbphy: usb-phy-controller@e6590100 { compatible = "renesas,usb-phy-r8a7791", "renesas,rcar-gen2-usb-phy"; reg = <0 0xe6590100 0 0x100>; @@ -620,11 +620,11 @@ resets = <&cpg 704>; status = "disabled"; - usb0: usb-channel@0 { + usb0: usb-phy@0 { reg = <0>; #phy-cells = <1>; }; - usb2: usb-channel@2 { + usb2: usb-phy@2 { reg = <2>; #phy-cells = <1>; }; diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index b601ee6f7580..7aa781ff3bff 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -506,7 +506,7 @@ status = "disabled"; }; - usbphy: usb-phy@e6590100 { + usbphy: usb-phy-controller@e6590100 { compatible = "renesas,usb-phy-r8a7794", "renesas,rcar-gen2-usb-phy"; reg = <0 0xe6590100 0 0x100>; @@ -518,11 +518,11 @@ resets = <&cpg 704>; status = "disabled"; - usb0: usb-channel@0 { + usb0: usb-phy@0 { reg = <0>; #phy-cells = <1>; }; - usb2: usb-channel@2 { + usb2: usb-phy@2 { reg = <2>; #phy-cells = <1>; }; diff --git a/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts b/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts index 4bf813335e21..c18bbd7141c4 100644 --- a/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts +++ b/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts @@ -26,6 +26,22 @@ }; }; +&can0 { + pinctrl-0 = <&pins_can0>; + pinctrl-names = "default"; + + /* Assuming CN10/CN11 are wired for CAN1 */ + status = "okay"; +}; + +&can1 { + pinctrl-0 = <&pins_can1>; + pinctrl-names = "default"; + + /* Please only enable can0 or can1, depending on CN10/CN11 */ + /* status = "okay"; */ +}; + ð_miic { status = "okay"; renesas,miic-switch-portin = <MIIC_GMAC2_PORT>; @@ -52,6 +68,18 @@ }; &pinctrl{ + pins_can0: pins_can0 { + pinmux = <RZN1_PINMUX(162, RZN1_FUNC_CAN)>, /* CAN0_TXD */ + <RZN1_PINMUX(163, RZN1_FUNC_CAN)>; /* CAN0_RXD */ + drive-strength = <6>; + }; + + pins_can1: pins_can1 { + pinmux = <RZN1_PINMUX(109, RZN1_FUNC_CAN)>, /* CAN1_TXD */ + <RZN1_PINMUX(110, RZN1_FUNC_CAN)>; /* CAN1_RXD */ + drive-strength = <6>; + }; + pins_eth3: pins_eth3 { pinmux = <RZN1_PINMUX(36, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>, <RZN1_PINMUX(37, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>, diff --git a/arch/arm/boot/dts/r9a06g032.dtsi b/arch/arm/boot/dts/r9a06g032.dtsi index 5b97fa85474f..563024c9a4ae 100644 --- a/arch/arm/boot/dts/r9a06g032.dtsi +++ b/arch/arm/boot/dts/r9a06g032.dtsi @@ -423,6 +423,26 @@ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; }; + + can0: can@52104000 { + compatible = "renesas,r9a06g032-sja1000","renesas,rzn1-sja1000"; + reg = <0x52104000 0x800>; + reg-io-width = <4>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sysctrl R9A06G032_HCLK_CAN0>; + power-domains = <&sysctrl>; + status = "disabled"; + }; + + can1: can@52105000 { + compatible = "renesas,r9a06g032-sja1000", "renesas,rzn1-sja1000"; + reg = <0x52105000 0x800>; + reg-io-width = <4>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sysctrl R9A06G032_HCLK_CAN1>; + power-domains = <&sysctrl>; + status = "disabled"; + }; }; timer { diff --git a/arch/arm/boot/dts/rk3036-evb.dts b/arch/arm/boot/dts/rk3036-evb.dts index 2a7e6624efb9..9fd4d9db9f8f 100644 --- a/arch/arm/boot/dts/rk3036-evb.dts +++ b/arch/arm/boot/dts/rk3036-evb.dts @@ -15,16 +15,20 @@ }; &emac { - pinctrl-names = "default"; - pinctrl-0 = <&emac_xfer>, <&emac_mdio>; phy = <&phy0>; - phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */ phy-reset-duration = <10>; /* millisecond */ - + phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */ + pinctrl-names = "default"; + pinctrl-0 = <&emac_xfer>, <&emac_mdio>; status = "okay"; - phy0: ethernet-phy@0 { - reg = <0>; + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@0 { + reg = <0>; + }; }; }; diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts index e817eba8c622..67e1e04139e7 100644 --- a/arch/arm/boot/dts/rk3036-kylin.dts +++ b/arch/arm/boot/dts/rk3036-kylin.dts @@ -80,16 +80,20 @@ }; &emac { - pinctrl-names = "default"; - pinctrl-0 = <&emac_xfer>, <&emac_mdio>; phy = <&phy0>; - phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */ phy-reset-duration = <10>; /* millisecond */ - + phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */ + pinctrl-names = "default"; + pinctrl-0 = <&emac_xfer>, <&emac_mdio>; status = "okay"; - phy0: ethernet-phy@0 { - reg = <0>; + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@0 { + reg = <0>; + }; }; }; diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi index 9b0f0497567d..78686fc72ce6 100644 --- a/arch/arm/boot/dts/rk3036.dtsi +++ b/arch/arm/boot/dts/rk3036.dtsi @@ -225,11 +225,9 @@ }; emac: ethernet@10200000 { - compatible = "rockchip,rk3036-emac", "snps,arc-emac"; + compatible = "rockchip,rk3036-emac"; reg = <0x10200000 0x4000>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; rockchip,grf = <&grf>; clocks = <&cru HCLK_MAC>, <&cru SCLK_MACREF>, <&cru SCLK_MAC>; clock-names = "hclk", "macref", "macclk"; diff --git a/arch/arm/boot/dts/rk3066a-marsboard.dts b/arch/arm/boot/dts/rk3066a-marsboard.dts index a66d915aa0f6..8beecd628282 100644 --- a/arch/arm/boot/dts/rk3066a-marsboard.dts +++ b/arch/arm/boot/dts/rk3066a-marsboard.dts @@ -150,18 +150,21 @@ #include "tps65910.dtsi" &emac { - status = "okay"; - phy = <&phy0>; phy-supply = <&vcc_rmii>; - pinctrl-names = "default"; pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; - phy0: ethernet-phy@0 { - reg = <0>; - interrupt-parent = <&gpio1>; - interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>; + phy0: ethernet-phy@0 { + reg = <0>; + interrupt-parent = <&gpio1>; + interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>; + }; }; }; diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts index dbbc5170094e..3eee42137b6d 100644 --- a/arch/arm/boot/dts/rk3066a-rayeager.dts +++ b/arch/arm/boot/dts/rk3066a-rayeager.dts @@ -142,15 +142,20 @@ }; &emac { - pinctrl-names = "default"; - pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&rmii_rst>; phy = <&phy0>; phy-supply = <&vcc_rmii>; + pinctrl-names = "default"; + pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&rmii_rst>; status = "okay"; - phy0: ethernet-phy@0 { - reg = <0>; - reset-gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>; + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@0 { + reg = <0>; + reset-gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>; + }; }; }; diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index a9ed3cd2c2da..e7cf18823558 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -126,18 +126,21 @@ }; &emac { - status = "okay"; - + phy = <&phy0>; + phy-supply = <&vcc_rmii>; pinctrl-names = "default"; pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>; + status = "okay"; - phy = <&phy0>; - phy-supply = <&vcc_rmii>; + mdio { + #address-cells = <1>; + #size-cells = <0>; - phy0: ethernet-phy@0 { - reg = <0>; - interrupt-parent = <&gpio3>; - interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>; + phy0: ethernet-phy@0 { + reg = <0>; + interrupt-parent = <&gpio3>; + interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>; + }; }; }; diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi index 616a828e0c6e..bf285091a9eb 100644 --- a/arch/arm/boot/dts/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -186,8 +186,6 @@ compatible = "snps,arc-emac"; reg = <0x10204000 0x3c>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; rockchip,grf = <&grf>; diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi index 5541df4df628..964c5fe51755 100644 --- a/arch/arm/boot/dts/s5pv210-aries.dtsi +++ b/arch/arm/boot/dts/s5pv210-aries.dtsi @@ -738,7 +738,7 @@ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; }; - magnetometer_i2c_pins: yas529-i2c-pins-pins { + magnetometer_i2c_pins: yas529-i2c-pins { samsung,pins = "gpj0-0", "gpj0-1"; samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; @@ -788,7 +788,7 @@ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; - pmic_i2c_pins: pmic-i2c-pins-pins { + pmic_i2c_pins: pmic-i2c-pins { samsung,pins = "gpj4-0", "gpj4-3"; samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; diff --git a/arch/arm/boot/dts/s5pv210-galaxys.dts b/arch/arm/boot/dts/s5pv210-galaxys.dts index cdd3653d487f..532d3f5bceb1 100644 --- a/arch/arm/boot/dts/s5pv210-galaxys.dts +++ b/arch/arm/boot/dts/s5pv210-galaxys.dts @@ -150,7 +150,7 @@ pinctrl-names = "default"; pinctrl-0 = <&sleep_cfg>; - fm_i2c_pins: fm-i2c-pins-pins { + fm_i2c_pins: fm-i2c-pins { samsung,pins = "gpd1-2", "gpd1-3"; samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; diff --git a/arch/arm/boot/dts/sam9x60.dtsi b/arch/arm/boot/dts/sam9x60.dtsi index d3f60f6a456d..8f5477e307dd 100644 --- a/arch/arm/boot/dts/sam9x60.dtsi +++ b/arch/arm/boot/dts/sam9x60.dtsi @@ -12,6 +12,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/clock/at91.h> +#include <dt-bindings/mfd/at91-usart.h> #include <dt-bindings/mfd/atmel-flexcom.h> / { @@ -583,6 +584,7 @@ dbgu: serial@fffff200 { compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <47 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index 2c50a021aa76..14c35c12a115 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -9,6 +9,7 @@ #include <dt-bindings/dma/at91.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/clock/at91.h> +#include <dt-bindings/mfd/at91-usart.h> #include <dt-bindings/iio/adc/at91-sama5d2_adc.h> / { @@ -441,6 +442,7 @@ uart0: serial@f801c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf801c000 0x100>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <24 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | @@ -457,6 +459,7 @@ uart1: serial@f8020000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8020000 0x100>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <25 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | @@ -473,6 +476,7 @@ uart2: serial@f8024000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8024000 0x100>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <26 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | @@ -530,6 +534,7 @@ uart5: serial@200 { compatible = "atmel,at91sam9260-usart"; reg = <0x200 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; clock-names = "usart"; @@ -600,6 +605,7 @@ uart6: serial@200 { compatible = "atmel,at91sam9260-usart"; reg = <0x200 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>; clocks = <&pmc PMC_TYPE_PERIPHERAL 20>; clock-names = "usart"; @@ -769,6 +775,7 @@ uart3: serial@fc008000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfc008000 0x100>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <27 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma1 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | @@ -785,6 +792,7 @@ uart4: serial@fc00c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfc00c000 0x100>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(43))>, @@ -810,6 +818,7 @@ uart7: serial@200 { compatible = "atmel,at91sam9260-usart"; reg = <0x200 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <21 IRQ_TYPE_LEVEL_HIGH 7>; clocks = <&pmc PMC_TYPE_PERIPHERAL 21>; clock-names = "usart"; @@ -880,6 +889,7 @@ uart8: serial@200 { compatible = "atmel,at91sam9260-usart"; reg = <0x200 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>; clocks = <&pmc PMC_TYPE_PERIPHERAL 22>; clock-names = "usart"; @@ -951,6 +961,7 @@ uart9: serial@200 { compatible = "atmel,at91sam9260-usart"; reg = <0x200 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>; clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; clock-names = "usart"; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 2d0935ad2225..bde8e92d60bb 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -12,6 +12,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/clock/at91.h> +#include <dt-bindings/mfd/at91-usart.h> / { #address-cells = <1>; @@ -194,6 +195,7 @@ usart0: serial@f001c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf001c000 0x100>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>; dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>, <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>; @@ -208,6 +210,7 @@ usart1: serial@f0020000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf0020000 0x100>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <13 IRQ_TYPE_LEVEL_HIGH 5>; dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(5)>, <&dma0 2 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>; @@ -222,6 +225,7 @@ uart0: serial@f0024000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf0024000 0x100>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; @@ -356,6 +360,7 @@ usart2: serial@f8020000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8020000 0x100>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>; dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(7)>, <&dma1 2 (AT91_DMA_CFG_PER_ID(8) | AT91_DMA_CFG_FIFOCFG_ASAP)>; @@ -370,6 +375,7 @@ usart3: serial@f8024000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8024000 0x100>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(9)>, <&dma1 2 (AT91_DMA_CFG_PER_ID(10) | AT91_DMA_CFG_FIFOCFG_ASAP)>; @@ -464,6 +470,7 @@ dbgu: serial@ffffee00 { compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(13)>, <&dma1 2 (AT91_DMA_CFG_PER_ID(14) | AT91_DMA_CFG_FIFOCFG_ASAP)>; diff --git a/arch/arm/boot/dts/sama5d3_uart.dtsi b/arch/arm/boot/dts/sama5d3_uart.dtsi index a3eaba995cf4..44d1173f2ffb 100644 --- a/arch/arm/boot/dts/sama5d3_uart.dtsi +++ b/arch/arm/boot/dts/sama5d3_uart.dtsi @@ -9,6 +9,7 @@ #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/clock/at91.h> +#include <dt-bindings/mfd/at91-usart.h> / { aliases { @@ -39,6 +40,7 @@ uart0: serial@f0024000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf0024000 0x100>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; @@ -50,6 +52,7 @@ uart1: serial@f8028000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8028000 0x100>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index 1e5c01898ccf..af62157ae214 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/clock/at91.h> #include <dt-bindings/dma/at91.h> +#include <dt-bindings/mfd/at91-usart.h> #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> @@ -278,6 +279,7 @@ uart0: serial@f8004000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8004000 0x100>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <27 IRQ_TYPE_LEVEL_HIGH 5>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) @@ -437,6 +439,7 @@ usart0: serial@f802c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf802c000 0x100>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) @@ -455,6 +458,7 @@ usart1: serial@f8030000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8030000 0x100>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) @@ -490,6 +494,7 @@ uart1: serial@fc004000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfc004000 0x100>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) @@ -508,6 +513,7 @@ usart2: serial@fc008000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfc008000 0x100>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>; dmas = <&dma1 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) @@ -526,6 +532,7 @@ usart3: serial@fc00c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfc00c000 0x100>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <30 IRQ_TYPE_LEVEL_HIGH 5>; dmas = <&dma1 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) @@ -544,6 +551,7 @@ usart4: serial@fc010000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfc010000 0x100>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <31 IRQ_TYPE_LEVEL_HIGH 5>; dmas = <&dma1 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) @@ -770,6 +778,7 @@ dbgu: serial@fc069000 { compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xfc069000 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <45 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; diff --git a/arch/arm/boot/dts/sama7g5.dtsi b/arch/arm/boot/dts/sama7g5.dtsi index bb6d71e6dfeb..7bd8ae8e8d38 100644 --- a/arch/arm/boot/dts/sama7g5.dtsi +++ b/arch/arm/boot/dts/sama7g5.dtsi @@ -14,6 +14,7 @@ #include <dt-bindings/clock/at91.h> #include <dt-bindings/dma/at91.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/mfd/at91-usart.h> / { model = "Microchip SAMA7G5 family SoC"; @@ -603,6 +604,7 @@ uart0: serial@200 { compatible = "atmel,at91sam9260-usart"; reg = <0x200 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; clocks = <&pmc PMC_TYPE_PERIPHERAL 38>; clock-names = "usart"; @@ -651,6 +653,7 @@ uart3: serial@200 { compatible = "atmel,at91sam9260-usart"; reg = <0x200 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; clocks = <&pmc PMC_TYPE_PERIPHERAL 41>; clock-names = "usart"; @@ -694,6 +697,7 @@ uart4: serial@200 { compatible = "atmel,at91sam9260-usart"; reg = <0x200 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; clocks = <&pmc PMC_TYPE_PERIPHERAL 42>; clock-names = "usart"; @@ -719,6 +723,7 @@ uart7: serial@200 { compatible = "atmel,at91sam9260-usart"; reg = <0x200 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; clocks = <&pmc PMC_TYPE_PERIPHERAL 45>; clock-names = "usart"; @@ -866,9 +871,9 @@ #address-cells = <1>; #size-cells = <0>; atmel,fifo-size = <32>; - dmas = <&dma0 AT91_XDMAC_DT_PERID(27)>, - <&dma0 AT91_XDMAC_DT_PERID(28)>; - dma-names = "rx", "tx"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(28)>, + <&dma0 AT91_XDMAC_DT_PERID(27)>; + dma-names = "tx", "rx"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi index d2472cd8f1d0..efdd163eba30 100644 --- a/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi @@ -6,6 +6,40 @@ #include <dt-bindings/pinctrl/stm32-pinfunc.h> &pinctrl { + i2c1_pins_a: i2c1-0 { + pins { + pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */ + <STM32_PINMUX('E', 8, AF5)>; /* I2C1_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c1_sleep_pins_a: i2c1-sleep-0 { + pins { + pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */ + <STM32_PINMUX('E', 8, ANALOG)>; /* I2C1_SDA */ + }; + }; + + i2c5_pins_a: i2c5-0 { + pins { + pinmux = <STM32_PINMUX('D', 1, AF4)>, /* I2C5_SCL */ + <STM32_PINMUX('H', 6, AF4)>; /* I2C5_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c5_sleep_pins_a: i2c5-sleep-0 { + pins { + pinmux = <STM32_PINMUX('D', 1, ANALOG)>, /* I2C5_SCL */ + <STM32_PINMUX('H', 6, ANALOG)>; /* I2C5_SDA */ + }; + }; + sdmmc1_b4_pins_a: sdmmc1-b4-0 { pins { pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ @@ -108,6 +142,29 @@ }; }; + spi5_pins_a: spi5-0 { + pins1 { + pinmux = <STM32_PINMUX('H', 7, AF6)>, /* SPI5_SCK */ + <STM32_PINMUX('H', 3, AF5)>; /* SPI5_MOSI */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + + pins2 { + pinmux = <STM32_PINMUX('A', 8, AF5)>; /* SPI5_MISO */ + bias-disable; + }; + }; + + spi5_sleep_pins_a: spi5-sleep-0 { + pins { + pinmux = <STM32_PINMUX('H', 7, ANALOG)>, /* SPI5_SCK */ + <STM32_PINMUX('A', 8, ANALOG)>, /* SPI5_MISO */ + <STM32_PINMUX('H', 3, ANALOG)>; /* SPI5_MOSI */ + }; + }; + uart4_pins_a: uart4-0 { pins1 { pinmux = <STM32_PINMUX('D', 6, AF8)>; /* UART4_TX */ diff --git a/arch/arm/boot/dts/stm32mp131.dtsi b/arch/arm/boot/dts/stm32mp131.dtsi index 3a921db23e9f..dd35a607073d 100644 --- a/arch/arm/boot/dts/stm32mp131.dtsi +++ b/arch/arm/boot/dts/stm32mp131.dtsi @@ -97,6 +97,34 @@ }; }; + spi2: spi@4000b000 { + compatible = "st,stm32h7-spi"; + reg = <0x4000b000 0x400>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc SPI2_K>; + resets = <&rcc SPI2_R>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dmamux1 39 0x400 0x01>, + <&dmamux1 40 0x400 0x01>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + spi3: spi@4000c000 { + compatible = "st,stm32h7-spi"; + reg = <0x4000c000 0x400>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc SPI3_K>; + resets = <&rcc SPI3_R>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dmamux1 61 0x400 0x01>, + <&dmamux1 62 0x400 0x01>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + uart4: serial@40010000 { compatible = "st,stm32h7-uart"; reg = <0x40010000 0x400>; @@ -106,6 +134,56 @@ status = "disabled"; }; + i2c1: i2c@40012000 { + compatible = "st,stm32mp13-i2c"; + reg = <0x40012000 0x400>; + interrupt-names = "event", "error"; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc I2C1_K>; + resets = <&rcc I2C1_R>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dmamux1 33 0x400 0x1>, + <&dmamux1 34 0x400 0x1>; + dma-names = "rx", "tx"; + st,syscfg-fmp = <&syscfg 0x4 0x1>; + i2c-analog-filter; + status = "disabled"; + }; + + i2c2: i2c@40013000 { + compatible = "st,stm32mp13-i2c"; + reg = <0x40013000 0x400>; + interrupt-names = "event", "error"; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc I2C2_K>; + resets = <&rcc I2C2_R>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dmamux1 35 0x400 0x1>, + <&dmamux1 36 0x400 0x1>; + dma-names = "rx", "tx"; + st,syscfg-fmp = <&syscfg 0x4 0x2>; + i2c-analog-filter; + status = "disabled"; + }; + + spi1: spi@44004000 { + compatible = "st,stm32h7-spi"; + reg = <0x44004000 0x400>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc SPI1_K>; + resets = <&rcc SPI1_R>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dmamux1 37 0x400 0x01>, + <&dmamux1 38 0x400 0x01>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + dma1: dma-controller@48000000 { compatible = "st,stm32-dma"; reg = <0x48000000 0x400>; @@ -153,6 +231,88 @@ dma-channels = <16>; }; + spi4: spi@4c002000 { + compatible = "st,stm32h7-spi"; + reg = <0x4c002000 0x400>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc SPI4_K>; + resets = <&rcc SPI4_R>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dmamux1 83 0x400 0x01>, + <&dmamux1 84 0x400 0x01>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + spi5: spi@4c003000 { + compatible = "st,stm32h7-spi"; + reg = <0x4c003000 0x400>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc SPI5_K>; + resets = <&rcc SPI5_R>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dmamux1 85 0x400 0x01>, + <&dmamux1 86 0x400 0x01>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2c3: i2c@4c004000 { + compatible = "st,stm32mp13-i2c"; + reg = <0x4c004000 0x400>; + interrupt-names = "event", "error"; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc I2C3_K>; + resets = <&rcc I2C3_R>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dmamux1 73 0x400 0x1>, + <&dmamux1 74 0x400 0x1>; + dma-names = "rx", "tx"; + st,syscfg-fmp = <&syscfg 0x4 0x4>; + i2c-analog-filter; + status = "disabled"; + }; + + i2c4: i2c@4c005000 { + compatible = "st,stm32mp13-i2c"; + reg = <0x4c005000 0x400>; + interrupt-names = "event", "error"; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc I2C4_K>; + resets = <&rcc I2C4_R>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dmamux1 75 0x400 0x1>, + <&dmamux1 76 0x400 0x1>; + dma-names = "rx", "tx"; + st,syscfg-fmp = <&syscfg 0x4 0x8>; + i2c-analog-filter; + status = "disabled"; + }; + + i2c5: i2c@4c006000 { + compatible = "st,stm32mp13-i2c"; + reg = <0x4c006000 0x400>; + interrupt-names = "event", "error"; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc I2C5_K>; + resets = <&rcc I2C5_R>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dmamux1 115 0x400 0x1>, + <&dmamux1 116 0x400 0x1>; + dma-names = "rx", "tx"; + st,syscfg-fmp = <&syscfg 0x4 0x10>; + i2c-analog-filter; + status = "disabled"; + }; + rcc: rcc@50000000 { compatible = "st,stm32mp13-rcc", "syscon"; reg = <0x50000000 0x1000>; diff --git a/arch/arm/boot/dts/stm32mp135f-dk.dts b/arch/arm/boot/dts/stm32mp135f-dk.dts index e6b8ffd332c7..de341d17e87d 100644 --- a/arch/arm/boot/dts/stm32mp135f-dk.dts +++ b/arch/arm/boot/dts/stm32mp135f-dk.dts @@ -68,6 +68,32 @@ }; }; +&i2c1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c1_pins_a>; + pinctrl-1 = <&i2c1_sleep_pins_a>; + i2c-scl-rising-time-ns = <96>; + i2c-scl-falling-time-ns = <3>; + clock-frequency = <1000000>; + status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; +}; + +&i2c5 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c5_pins_a>; + pinctrl-1 = <&i2c5_sleep_pins_a>; + i2c-scl-rising-time-ns = <170>; + i2c-scl-falling-time-ns = <5>; + clock-frequency = <400000>; + status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; +}; + &iwdg2 { timeout-sec = <32>; status = "okay"; @@ -90,6 +116,13 @@ status = "okay"; }; +&spi5 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi5_pins_a>; + pinctrl-1 = <&spi5_sleep_pins_a>; + status = "disabled"; +}; + &uart4 { pinctrl-names = "default"; pinctrl-0 = <&uart4_pins_a>; diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi index 2cc9341d43d2..a9d2bec99014 100644 --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi @@ -1261,7 +1261,7 @@ }; qspi_bk1_pins_a: qspi-bk1-0 { - pins1 { + pins { pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */ <STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */ <STM32_PINMUX('F', 7, AF9)>, /* QSPI_BK1_IO2 */ @@ -1270,12 +1270,6 @@ drive-push-pull; slew-rate = <1>; }; - pins2 { - pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */ - bias-pull-up; - drive-push-pull; - slew-rate = <1>; - }; }; qspi_bk1_sleep_pins_a: qspi-bk1-sleep-0 { @@ -1283,13 +1277,12 @@ pinmux = <STM32_PINMUX('F', 8, ANALOG)>, /* QSPI_BK1_IO0 */ <STM32_PINMUX('F', 9, ANALOG)>, /* QSPI_BK1_IO1 */ <STM32_PINMUX('F', 7, ANALOG)>, /* QSPI_BK1_IO2 */ - <STM32_PINMUX('F', 6, ANALOG)>, /* QSPI_BK1_IO3 */ - <STM32_PINMUX('B', 6, ANALOG)>; /* QSPI_BK1_NCS */ + <STM32_PINMUX('F', 6, ANALOG)>; /* QSPI_BK1_IO3 */ }; }; qspi_bk2_pins_a: qspi-bk2-0 { - pins1 { + pins { pinmux = <STM32_PINMUX('H', 2, AF9)>, /* QSPI_BK2_IO0 */ <STM32_PINMUX('H', 3, AF9)>, /* QSPI_BK2_IO1 */ <STM32_PINMUX('G', 10, AF11)>, /* QSPI_BK2_IO2 */ @@ -1298,7 +1291,34 @@ drive-push-pull; slew-rate = <1>; }; - pins2 { + }; + + qspi_bk2_sleep_pins_a: qspi-bk2-sleep-0 { + pins { + pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* QSPI_BK2_IO0 */ + <STM32_PINMUX('H', 3, ANALOG)>, /* QSPI_BK2_IO1 */ + <STM32_PINMUX('G', 10, ANALOG)>, /* QSPI_BK2_IO2 */ + <STM32_PINMUX('G', 7, ANALOG)>; /* QSPI_BK2_IO3 */ + }; + }; + + qspi_cs1_pins_a: qspi-cs1-0 { + pins { + pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */ + bias-pull-up; + drive-push-pull; + slew-rate = <1>; + }; + }; + + qspi_cs1_sleep_pins_a: qspi-cs1-sleep-0 { + pins { + pinmux = <STM32_PINMUX('B', 6, ANALOG)>; /* QSPI_BK1_NCS */ + }; + }; + + qspi_cs2_pins_a: qspi-cs2-0 { + pins { pinmux = <STM32_PINMUX('C', 0, AF10)>; /* QSPI_BK2_NCS */ bias-pull-up; drive-push-pull; @@ -1306,13 +1326,9 @@ }; }; - qspi_bk2_sleep_pins_a: qspi-bk2-sleep-0 { + qspi_cs2_sleep_pins_a: qspi-cs2-sleep-0 { pins { - pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* QSPI_BK2_IO0 */ - <STM32_PINMUX('H', 3, ANALOG)>, /* QSPI_BK2_IO1 */ - <STM32_PINMUX('G', 10, ANALOG)>, /* QSPI_BK2_IO2 */ - <STM32_PINMUX('G', 7, ANALOG)>, /* QSPI_BK2_IO3 */ - <STM32_PINMUX('C', 0, ANALOG)>; /* QSPI_BK2_NCS */ + pinmux = <STM32_PINMUX('C', 0, ANALOG)>; /* QSPI_BK2_NCS */ }; }; diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi index 742fdeeff4b6..e02b3f5d44cb 100644 --- a/arch/arm/boot/dts/stm32mp151.dtsi +++ b/arch/arm/boot/dts/stm32mp151.dtsi @@ -127,6 +127,8 @@ #size-cells = <0>; compatible = "st,stm32-timers"; reg = <0x40000000 0x400>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global"; clocks = <&rcc TIM2_K>; clock-names = "int"; dmas = <&dmamux1 18 0x400 0x1>, @@ -160,6 +162,8 @@ #size-cells = <0>; compatible = "st,stm32-timers"; reg = <0x40001000 0x400>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global"; clocks = <&rcc TIM3_K>; clock-names = "int"; dmas = <&dmamux1 23 0x400 0x1>, @@ -194,6 +198,8 @@ #size-cells = <0>; compatible = "st,stm32-timers"; reg = <0x40002000 0x400>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global"; clocks = <&rcc TIM4_K>; clock-names = "int"; dmas = <&dmamux1 29 0x400 0x1>, @@ -226,6 +232,8 @@ #size-cells = <0>; compatible = "st,stm32-timers"; reg = <0x40003000 0x400>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global"; clocks = <&rcc TIM5_K>; clock-names = "int"; dmas = <&dmamux1 55 0x400 0x1>, @@ -260,6 +268,8 @@ #size-cells = <0>; compatible = "st,stm32-timers"; reg = <0x40004000 0x400>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global"; clocks = <&rcc TIM6_K>; clock-names = "int"; dmas = <&dmamux1 69 0x400 0x1>; @@ -278,6 +288,8 @@ #size-cells = <0>; compatible = "st,stm32-timers"; reg = <0x40005000 0x400>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global"; clocks = <&rcc TIM7_K>; clock-names = "int"; dmas = <&dmamux1 70 0x400 0x1>; @@ -296,6 +308,8 @@ #size-cells = <0>; compatible = "st,stm32-timers"; reg = <0x40006000 0x400>; + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global"; clocks = <&rcc TIM12_K>; clock-names = "int"; status = "disabled"; @@ -318,6 +332,8 @@ #size-cells = <0>; compatible = "st,stm32-timers"; reg = <0x40007000 0x400>; + interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global"; clocks = <&rcc TIM13_K>; clock-names = "int"; status = "disabled"; @@ -340,6 +356,8 @@ #size-cells = <0>; compatible = "st,stm32-timers"; reg = <0x40008000 0x400>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global"; clocks = <&rcc TIM14_K>; clock-names = "int"; status = "disabled"; @@ -623,6 +641,11 @@ #size-cells = <0>; compatible = "st,stm32-timers"; reg = <0x44000000 0x400>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "brk", "up", "trg-com", "cc"; clocks = <&rcc TIM1_K>; clock-names = "int"; dmas = <&dmamux1 11 0x400 0x1>, @@ -659,6 +682,11 @@ #size-cells = <0>; compatible = "st,stm32-timers"; reg = <0x44001000 0x400>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "brk", "up", "trg-com", "cc"; clocks = <&rcc TIM8_K>; clock-names = "int"; dmas = <&dmamux1 47 0x400 0x1>, @@ -746,6 +774,8 @@ #size-cells = <0>; compatible = "st,stm32-timers"; reg = <0x44006000 0x400>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global"; clocks = <&rcc TIM15_K>; clock-names = "int"; dmas = <&dmamux1 105 0x400 0x1>, @@ -773,6 +803,8 @@ #size-cells = <0>; compatible = "st,stm32-timers"; reg = <0x44007000 0x400>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global"; clocks = <&rcc TIM16_K>; clock-names = "int"; dmas = <&dmamux1 109 0x400 0x1>, @@ -797,6 +829,8 @@ #size-cells = <0>; compatible = "st,stm32-timers"; reg = <0x44008000 0x400>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global"; clocks = <&rcc TIM17_K>; clock-names = "int"; dmas = <&dmamux1 111 0x400 0x1>, diff --git a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts index 2a2829283456..9a2a4bc7d079 100644 --- a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts +++ b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts @@ -2,7 +2,7 @@ /* * Copyright (c) STMicroelectronics 2019 - All Rights Reserved * Copyright (c) 2020 Engicam srl - * Copyright (c) 2020 Amarula Solutons(India) + * Copyright (c) 2020 Amarula Solutions(India) */ /dts-v1/; diff --git a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2.dts b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2.dts index 1f75f1d45181..60ce4425a7fd 100644 --- a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2.dts +++ b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2.dts @@ -2,7 +2,7 @@ /* * Copyright (c) STMicroelectronics 2019 - All Rights Reserved * Copyright (c) 2020 Engicam srl - * Copyright (c) 2020 Amarula Solutons(India) + * Copyright (c) 2020 Amarula Solutions(India) */ /dts-v1/; diff --git a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts index ba92d7d8ed00..390ee8c05754 100644 --- a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts +++ b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts @@ -2,7 +2,7 @@ /* * Copyright (c) STMicroelectronics 2019 - All Rights Reserved * Copyright (c) 2020 Engicam srl - * Copyright (c) 2020 Amarula Solutons(India) + * Copyright (c) 2020 Amarula Solutions(India) */ /dts-v1/; diff --git a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1.dtsi b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1.dtsi index 01166ccacf2b..9de893101b40 100644 --- a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1.dtsi +++ b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1.dtsi @@ -2,7 +2,7 @@ /* * Copyright (c) STMicroelectronics 2019 - All Rights Reserved * Copyright (c) 2020 Engicam srl - * Copyright (c) 2020 Amarula Solutons(India) + * Copyright (c) 2020 Amarula Solutions(India) */ / { diff --git a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts index fae656edd820..0d7560ba2950 100644 --- a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts +++ b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts @@ -2,7 +2,7 @@ /* * Copyright (c) STMicroelectronics 2019 - All Rights Reserved * Copyright (c) 2020 Engicam srl - * Copyright (c) 2020 Amarula Solutons(India) + * Copyright (c) 2020 Amarula Solutions(India) */ /dts-v1/; diff --git a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dts b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dts index b9d0d3d6ad15..d949559be020 100644 --- a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dts +++ b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dts @@ -2,7 +2,7 @@ /* * Copyright (c) STMicroelectronics 2019 - All Rights Reserved * Copyright (c) 2020 Engicam srl - * Copyright (c) 2020 Amarula Solutons(India) + * Copyright (c) 2020 Amarula Solutions(India) */ /dts-v1/; diff --git a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1.dtsi b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1.dtsi index 0b85175f151e..fb4600a59869 100644 --- a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1.dtsi +++ b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1.dtsi @@ -2,7 +2,7 @@ /* * Copyright (c) STMicroelectronics 2019 - All Rights Reserved * Copyright (c) 2020 Engicam srl - * Copyright (c) 2020 Amarula Solutons(India) + * Copyright (c) 2020 Amarula Solutions(India) */ / { diff --git a/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi b/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi index ac53ee3c496b..30156b7546ed 100644 --- a/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi +++ b/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi @@ -435,12 +435,6 @@ pinctrl-0 = <&spi1_pins_a>; cs-gpios = <&gpioz 3 0>; status = "disabled"; - - spidev@0 { - compatible = "spidev"; - reg = <0>; - spi-max-frequency = <100000>; - }; }; &timers1 { diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts index d142dd30e16b..050c3c27a420 100644 --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts @@ -255,8 +255,16 @@ &qspi { pinctrl-names = "default", "sleep"; - pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>; - pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a &qspi_bk2_sleep_pins_a>; + pinctrl-0 = <&qspi_clk_pins_a + &qspi_bk1_pins_a + &qspi_cs1_pins_a + &qspi_bk2_pins_a + &qspi_cs2_pins_a>; + pinctrl-1 = <&qspi_clk_sleep_pins_a + &qspi_bk1_sleep_pins_a + &qspi_cs1_sleep_pins_a + &qspi_bk2_sleep_pins_a + &qspi_cs2_sleep_pins_a>; reg = <0x58003000 0x1000>, <0x70000000 0x4000000>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi index 380f22a35821..a1bcd67fa505 100644 --- a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi +++ b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi @@ -993,7 +993,7 @@ touchscreen@41 { compatible = "st,stmpe811"; reg = <0x41>; - irq-gpio = <&gpio TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>; + irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>; interrupt-controller; id = <0>; blocks = <0x5>; diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi index 9bdc4cb71449..99d7dad72d29 100644 --- a/arch/arm/boot/dts/tegra30-apalis.dtsi +++ b/arch/arm/boot/dts/tegra30-apalis.dtsi @@ -976,7 +976,7 @@ touchscreen@41 { compatible = "st,stmpe811"; reg = <0x41>; - irq-gpio = <&gpio TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>; + irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>; interrupt-controller; id = <0>; blocks = <0x5>; diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi index 310dff05910d..2867a138e011 100644 --- a/arch/arm/boot/dts/tegra30-colibri.dtsi +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi @@ -849,7 +849,7 @@ touchscreen@41 { compatible = "st,stmpe811"; reg = <0x41>; - irq-gpio = <&gpio TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>; + irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>; interrupt-controller; id = <0>; blocks = <0x5>; diff --git a/arch/arm/boot/dts/uniphier-ld4-ref.dts b/arch/arm/boot/dts/uniphier-ld4-ref.dts index c46c2e8a10a7..e007db084787 100644 --- a/arch/arm/boot/dts/uniphier-ld4-ref.dts +++ b/arch/arm/boot/dts/uniphier-ld4-ref.dts @@ -36,11 +36,11 @@ }; ðsc { - interrupts = <1 8>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; }; &serialsc { - interrupts = <1 8>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; }; &serial0 { @@ -56,7 +56,7 @@ }; &gpio { - xirq1 { + xirq1-hog { gpio-hog; gpios = <UNIPHIER_GPIO_IRQ(1) 0>; input; diff --git a/arch/arm/boot/dts/uniphier-ld4.dtsi b/arch/arm/boot/dts/uniphier-ld4.dtsi index b52957ccda0d..9dceff12a633 100644 --- a/arch/arm/boot/dts/uniphier-ld4.dtsi +++ b/arch/arm/boot/dts/uniphier-ld4.dtsi @@ -6,6 +6,7 @@ // Author: Masahiro Yamada <yamada.masahiro@socionext.com> #include <dt-bindings/gpio/uniphier-gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> / { compatible = "socionext,uniphier-ld4"; @@ -55,7 +56,8 @@ compatible = "socionext,uniphier-system-cache"; reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>; - interrupts = <0 174 4>, <0 175 4>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; cache-unified; cache-size = <(512 * 1024)>; cache-sets = <256>; @@ -69,7 +71,7 @@ reg = <0x54006000 0x100>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 39 4>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; clocks = <&peri_clk 11>; @@ -80,7 +82,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006800 0x40>; - interrupts = <0 33 4>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; clocks = <&peri_clk 0>; @@ -91,7 +93,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006900 0x40>; - interrupts = <0 35 4>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; clocks = <&peri_clk 1>; @@ -102,7 +104,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006a00 0x40>; - interrupts = <0 37 4>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; clocks = <&peri_clk 2>; @@ -113,7 +115,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006b00 0x40>; - interrupts = <0 29 4>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; clocks = <&peri_clk 3>; @@ -140,7 +142,7 @@ reg = <0x58400000 0x40>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 41 1>; + interrupts = <GIC_SPI 41 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; clocks = <&peri_clk 4>; @@ -154,7 +156,7 @@ reg = <0x58480000 0x40>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 42 1>; + interrupts = <GIC_SPI 42 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; clocks = <&peri_clk 5>; @@ -168,7 +170,7 @@ reg = <0x58500000 0x40>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 43 1>; + interrupts = <GIC_SPI 43 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; clocks = <&peri_clk 6>; @@ -182,7 +184,7 @@ reg = <0x58580000 0x40>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 44 1>; + interrupts = <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; clocks = <&peri_clk 7>; @@ -240,8 +242,13 @@ dmac: dma-controller@5a000000 { compatible = "socionext,uniphier-mio-dmac"; reg = <0x5a000000 0x1000>; - interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>, - <0 71 4>, <0 72 4>, <0 73 4>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mio_clk 7>; resets = <&mio_rst 7>; #dma-cells = <1>; @@ -251,7 +258,7 @@ compatible = "socionext,uniphier-sd-v2.91"; status = "disabled"; reg = <0x5a400000 0x200>; - interrupts = <0 76 4>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default", "uhs"; pinctrl-0 = <&pinctrl_sd>; pinctrl-1 = <&pinctrl_sd_uhs>; @@ -271,7 +278,7 @@ compatible = "socionext,uniphier-sd-v2.91"; status = "disabled"; reg = <0x5a500000 0x200>; - interrupts = <0 78 4>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_emmc>; clocks = <&mio_clk 1>; @@ -289,7 +296,7 @@ compatible = "socionext,uniphier-ehci", "generic-ehci"; status = "disabled"; reg = <0x5a800100 0x100>; - interrupts = <0 80 4>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0>; clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 8>, @@ -303,7 +310,7 @@ compatible = "socionext,uniphier-ehci", "generic-ehci"; status = "disabled"; reg = <0x5a810100 0x100>; - interrupts = <0 81 4>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb1>; clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 9>, @@ -317,7 +324,7 @@ compatible = "socionext,uniphier-ehci", "generic-ehci"; status = "disabled"; reg = <0x5a820100 0x100>; - interrupts = <0 82 4>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb2>; clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 10>, @@ -358,14 +365,16 @@ timer@60000200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x60000200 0x20>; - interrupts = <1 11 0x104>; + interrupts = <GIC_PPI 11 + (GIC_CPU_MASK_RAW(1) | IRQ_TYPE_LEVEL_HIGH)>; clocks = <&arm_timer_clk>; }; timer@60000600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x60000600 0x20>; - interrupts = <1 13 0x104>; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_RAW(1) | IRQ_TYPE_LEVEL_HIGH)>; clocks = <&arm_timer_clk>; }; @@ -407,7 +416,7 @@ reg = <0x68000000 0x20>, <0x68100000 0x1000>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 65 4>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; clock-names = "nand", "nand_x", "ecc"; diff --git a/arch/arm/boot/dts/uniphier-ld6b-ref.dts b/arch/arm/boot/dts/uniphier-ld6b-ref.dts index 5bc7fe11b517..223a78b4a761 100644 --- a/arch/arm/boot/dts/uniphier-ld6b-ref.dts +++ b/arch/arm/boot/dts/uniphier-ld6b-ref.dts @@ -40,11 +40,11 @@ }; ðsc { - interrupts = <4 8>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; }; &serialsc { - interrupts = <4 8>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; }; &serial0 { @@ -60,7 +60,7 @@ }; &gpio { - xirq4 { + xirq4-hog { gpio-hog; gpios = <UNIPHIER_GPIO_IRQ(4) 0>; input; diff --git a/arch/arm/boot/dts/uniphier-pinctrl.dtsi b/arch/arm/boot/dts/uniphier-pinctrl.dtsi index c0fd029b37e5..f909ec2e5333 100644 --- a/arch/arm/boot/dts/uniphier-pinctrl.dtsi +++ b/arch/arm/boot/dts/uniphier-pinctrl.dtsi @@ -196,11 +196,21 @@ function = "usb0"; }; + pinctrl_usb0_device: usb0-device { + groups = "usb0_device"; + function = "usb0"; + }; + pinctrl_usb1: usb1 { groups = "usb1"; function = "usb1"; }; + pinctrl_usb1_device: usb1-device { + groups = "usb1_device"; + function = "usb1"; + }; + pinctrl_usb2: usb2 { groups = "usb2"; function = "usb2"; diff --git a/arch/arm/boot/dts/uniphier-pro4-ace.dts b/arch/arm/boot/dts/uniphier-pro4-ace.dts index 27ff2b7b9d0e..6baee4410d9c 100644 --- a/arch/arm/boot/dts/uniphier-pro4-ace.dts +++ b/arch/arm/boot/dts/uniphier-pro4-ace.dts @@ -99,3 +99,11 @@ &usb1 { status = "okay"; }; + +&ahci0 { + status = "okay"; +}; + +&ahci1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/uniphier-pro4-ref.dts b/arch/arm/boot/dts/uniphier-pro4-ref.dts index 3b9b61314d01..d2ce5c039865 100644 --- a/arch/arm/boot/dts/uniphier-pro4-ref.dts +++ b/arch/arm/boot/dts/uniphier-pro4-ref.dts @@ -39,11 +39,11 @@ }; ðsc { - interrupts = <2 8>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; }; &serialsc { - interrupts = <2 8>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; }; &serial0 { @@ -59,7 +59,7 @@ }; &gpio { - xirq2 { + xirq2-hog { gpio-hog; gpios = <UNIPHIER_GPIO_IRQ(2) 0>; input; @@ -108,3 +108,11 @@ reg = <0>; }; }; + +&ahci0 { + status = "okay"; +}; + +&ahci1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/uniphier-pro4.dtsi b/arch/arm/boot/dts/uniphier-pro4.dtsi index a53b73ee93e9..a309e64c57c8 100644 --- a/arch/arm/boot/dts/uniphier-pro4.dtsi +++ b/arch/arm/boot/dts/uniphier-pro4.dtsi @@ -6,6 +6,7 @@ // Author: Masahiro Yamada <yamada.masahiro@socionext.com> #include <dt-bindings/gpio/uniphier-gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> / { compatible = "socionext,uniphier-pro4"; @@ -63,7 +64,8 @@ compatible = "socionext,uniphier-system-cache"; reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>; - interrupts = <0 174 4>, <0 175 4>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; cache-unified; cache-size = <(768 * 1024)>; cache-sets = <256>; @@ -77,7 +79,7 @@ reg = <0x54006000 0x100>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 39 4>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; clocks = <&peri_clk 11>; @@ -88,7 +90,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006800 0x40>; - interrupts = <0 33 4>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; clocks = <&peri_clk 0>; @@ -99,7 +101,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006900 0x40>; - interrupts = <0 35 4>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; clocks = <&peri_clk 1>; @@ -110,7 +112,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006a00 0x40>; - interrupts = <0 37 4>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; clocks = <&peri_clk 2>; @@ -121,7 +123,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006b00 0x40>; - interrupts = <0 177 4>; + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; clocks = <&peri_clk 3>; @@ -148,7 +150,7 @@ reg = <0x58780000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 41 4>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; clocks = <&peri_clk 4>; @@ -162,7 +164,7 @@ reg = <0x58781000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 42 4>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; clocks = <&peri_clk 5>; @@ -176,7 +178,7 @@ reg = <0x58782000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 43 4>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; clocks = <&peri_clk 6>; @@ -190,7 +192,7 @@ reg = <0x58783000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 44 4>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; clocks = <&peri_clk 7>; @@ -206,7 +208,7 @@ reg = <0x58785000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 25 4>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; clocks = <&peri_clk 9>; resets = <&peri_rst 9>; clock-frequency = <400000>; @@ -218,7 +220,7 @@ reg = <0x58786000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 26 4>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; clocks = <&peri_clk 10>; resets = <&peri_rst 10>; clock-frequency = <400000>; @@ -274,8 +276,14 @@ dmac: dma-controller@5a000000 { compatible = "socionext,uniphier-mio-dmac"; reg = <0x5a000000 0x1000>; - interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>, - <0 71 4>, <0 72 4>, <0 73 4>, <0 74 4>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mio_clk 7>; resets = <&mio_rst 7>; #dma-cells = <1>; @@ -285,7 +293,7 @@ compatible = "socionext,uniphier-sd-v2.91"; status = "disabled"; reg = <0x5a400000 0x200>; - interrupts = <0 76 4>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default", "uhs"; pinctrl-0 = <&pinctrl_sd>; pinctrl-1 = <&pinctrl_sd_uhs>; @@ -305,7 +313,7 @@ compatible = "socionext,uniphier-sd-v2.91"; status = "disabled"; reg = <0x5a500000 0x200>; - interrupts = <0 78 4>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_emmc>; clocks = <&mio_clk 1>; @@ -323,7 +331,7 @@ compatible = "socionext,uniphier-sd-v2.91"; status = "disabled"; reg = <0x5a600000 0x200>; - interrupts = <0 85 4>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sd1>; clocks = <&mio_clk 2>; @@ -339,7 +347,7 @@ compatible = "socionext,uniphier-ehci", "generic-ehci"; status = "disabled"; reg = <0x5a800100 0x100>; - interrupts = <0 80 4>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb2>; clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 8>, @@ -355,7 +363,7 @@ compatible = "socionext,uniphier-ehci", "generic-ehci"; status = "disabled"; reg = <0x5a810100 0x100>; - interrupts = <0 81 4>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb3>; clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 9>, @@ -376,7 +384,7 @@ compatible = "socionext,uniphier-pro4-pinctrl"; }; - usb-phy { + usb-controller { compatible = "socionext,uniphier-pro4-usb2-phy"; #address-cells = <1>; #size-cells = <0>; @@ -403,6 +411,11 @@ vbus-supply = <&usb1_vbus>; }; }; + + sg_clk: clock { + compatible = "socionext,uniphier-pro4-sg-clock"; + #clock-cells = <1>; + }; }; soc-glue@5f900000 { @@ -431,7 +444,7 @@ xdmac: dma-controller@5fc10000 { compatible = "socionext,uniphier-xdmac"; reg = <0x5fc10000 0x5300>; - interrupts = <0 188 4>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; dma-channels = <16>; #dma-cells = <2>; }; @@ -446,14 +459,16 @@ timer@60000200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x60000200 0x20>; - interrupts = <1 11 0x304>; + interrupts = <GIC_PPI 11 + (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>; clocks = <&arm_timer_clk>; }; timer@60000600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x60000600 0x20>; - interrupts = <1 13 0x304>; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>; clocks = <&arm_timer_clk>; }; @@ -485,7 +500,7 @@ compatible = "socionext,uniphier-pro4-ave4"; status = "disabled"; reg = <0x65000000 0x8500>; - interrupts = <0 66 4>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ether_rgmii>; clock-names = "gio", "ether", "ether-gb", "ether-phy"; @@ -503,12 +518,105 @@ }; }; + ahci0: sata@65600000 { + compatible = "socionext,uniphier-pro4-ahci", + "generic-ahci"; + status = "disabled"; + reg = <0x65600000 0x10000>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sys_clk 12>, <&sys_clk 28>; + resets = <&sys_rst 12>, <&sys_rst 28>, <&ahci0_rst 3>; + ports-implemented = <1>; + phys = <&ahci0_phy>; + assigned-clocks = <&sg_clk 0>; + assigned-clock-rates = <25000000>; + }; + + sata-controller@65700000 { + compatible = "socionext,uniphier-pxs2-ahci-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65700000 0x100>; + + ahci0_rst: reset-controller@0 { + compatible = "socionext,uniphier-pro4-ahci-reset"; + reg = <0x0 0x4>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 28>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 28>; + #reset-cells = <1>; + }; + + ahci0_phy: sata-phy@10 { + compatible = "socionext,uniphier-pro4-ahci-phy"; + reg = <0x10 0x40>; + clock-names = "link", "gio"; + clocks = <&sys_clk 28>, <&sys_clk 12>; + reset-names = "link", "gio", "phy", + "pm", "tx", "rx"; + resets = <&sys_rst 28>, <&sys_rst 12>, + <&sys_rst 30>, + <&ahci0_rst 0>, <&ahci0_rst 1>, + <&ahci0_rst 2>; + #phy-cells = <0>; + }; + }; + + ahci1: sata@65800000 { + compatible = "socionext,uniphier-pro4-ahci", + "generic-ahci"; + status = "disabled"; + reg = <0x65800000 0x10000>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sys_clk 12>, <&sys_clk 29>; + resets = <&sys_rst 12>, <&sys_rst 29>, <&ahci1_rst 3>; + ports-implemented = <1>; + phys = <&ahci1_phy>; + assigned-clocks = <&sg_clk 0>; + assigned-clock-rates = <25000000>; + }; + + sata-controller@65900000 { + compatible = "socionext,uniphier-pro4-ahci-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65900000 0x100>; + + ahci1_rst: reset-controller@0 { + compatible = "socionext,uniphier-pro4-ahci-reset"; + reg = <0x0 0x4>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 29>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 29>; + #reset-cells = <1>; + }; + + ahci1_phy: sata-phy@10 { + compatible = "socionext,uniphier-pro4-ahci-phy"; + reg = <0x10 0x40>; + clock-names = "link", "gio"; + clocks = <&sys_clk 29>, <&sys_clk 12>; + reset-names = "link", "gio", "phy", + "pm", "tx", "rx"; + resets = <&sys_rst 29>, <&sys_rst 12>, + <&sys_rst 30>, + <&ahci1_rst 0>, <&ahci1_rst 1>, + <&ahci1_rst 2>; + #phy-cells = <0>; + }; + }; + usb0: usb@65a00000 { compatible = "socionext,uniphier-dwc3", "snps,dwc3"; status = "disabled"; reg = <0x65a00000 0xcd00>; interrupt-names = "host", "peripheral"; - interrupts = <0 134 4>, <0 135 4>; + interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0>; clock-names = "ref", "bus_early", "suspend"; @@ -518,7 +626,7 @@ dr_mode = "host"; }; - usb-glue@65b00000 { + usb-controller@65b00000 { compatible = "socionext,uniphier-pro4-dwc3-glue", "simple-mfd"; #address-cells = <1>; @@ -561,7 +669,8 @@ status = "disabled"; reg = <0x65c00000 0xcd00>; interrupt-names = "host", "peripheral"; - interrupts = <0 137 4>, <0 138 4>; + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb1>; clock-names = "ref", "bus_early", "suspend"; @@ -571,7 +680,7 @@ dr_mode = "host"; }; - usb-glue@65d00000 { + usb-controller@65d00000 { compatible = "socionext,uniphier-pro4-dwc3-glue", "simple-mfd"; #address-cells = <1>; @@ -605,7 +714,7 @@ reg = <0x68000000 0x20>, <0x68100000 0x1000>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 65 4>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; clock-names = "nand", "nand_x", "ecc"; diff --git a/arch/arm/boot/dts/uniphier-pro5.dtsi b/arch/arm/boot/dts/uniphier-pro5.dtsi index 3525125832dd..100edd7438d8 100644 --- a/arch/arm/boot/dts/uniphier-pro5.dtsi +++ b/arch/arm/boot/dts/uniphier-pro5.dtsi @@ -5,6 +5,8 @@ // Copyright (C) 2015-2016 Socionext Inc. // Author: Masahiro Yamada <yamada.masahiro@socionext.com> +#include <dt-bindings/interrupt-controller/arm-gic.h> + / { compatible = "socionext,uniphier-pro5"; #address-cells = <1>; @@ -135,7 +137,8 @@ compatible = "socionext,uniphier-system-cache"; reg = <0x500c0000 0x2000>, <0x503c0100 0x8>, <0x506c0000 0x400>; - interrupts = <0 190 4>, <0 191 4>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; cache-unified; cache-size = <(2 * 1024 * 1024)>; cache-sets = <512>; @@ -148,7 +151,8 @@ compatible = "socionext,uniphier-system-cache"; reg = <0x500c8000 0x2000>, <0x503c8100 0x8>, <0x506c8000 0x400>; - interrupts = <0 174 4>, <0 175 4>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; cache-unified; cache-size = <(2 * 1024 * 1024)>; cache-sets = <512>; @@ -162,7 +166,7 @@ reg = <0x54006000 0x100>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 39 4>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; clocks = <&peri_clk 11>; @@ -175,7 +179,7 @@ reg = <0x54006100 0x100>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 216 4>; + interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; clocks = <&peri_clk 11>; /* common with spi0 */ @@ -186,7 +190,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006800 0x40>; - interrupts = <0 33 4>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; clocks = <&peri_clk 0>; @@ -197,7 +201,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006900 0x40>; - interrupts = <0 35 4>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; clocks = <&peri_clk 1>; @@ -208,7 +212,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006a00 0x40>; - interrupts = <0 37 4>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; clocks = <&peri_clk 2>; @@ -219,7 +223,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006b00 0x40>; - interrupts = <0 177 4>; + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; clocks = <&peri_clk 3>; @@ -246,7 +250,7 @@ reg = <0x58780000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 41 4>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; clocks = <&peri_clk 4>; @@ -260,7 +264,7 @@ reg = <0x58781000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 42 4>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; clocks = <&peri_clk 5>; @@ -274,7 +278,7 @@ reg = <0x58782000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 43 4>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; clocks = <&peri_clk 6>; @@ -288,7 +292,7 @@ reg = <0x58783000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 44 4>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; clocks = <&peri_clk 7>; @@ -304,7 +308,7 @@ reg = <0x58785000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 25 4>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; clocks = <&peri_clk 9>; resets = <&peri_rst 9>; clock-frequency = <400000>; @@ -316,7 +320,7 @@ reg = <0x58786000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 26 4>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; clocks = <&peri_clk 10>; resets = <&peri_rst 10>; clock-frequency = <400000>; @@ -415,7 +419,7 @@ xdmac: dma-controller@5fc10000 { compatible = "socionext,uniphier-xdmac"; reg = <0x5fc10000 0x5300>; - interrupts = <0 188 4>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; dma-channels = <16>; #dma-cells = <2>; }; @@ -430,14 +434,16 @@ timer@60000200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x60000200 0x20>; - interrupts = <1 11 0x304>; + interrupts = <GIC_PPI 11 + (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>; clocks = <&arm_timer_clk>; }; timer@60000600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x60000600 0x20>; - interrupts = <1 13 0x304>; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>; clocks = <&arm_timer_clk>; }; @@ -470,7 +476,7 @@ status = "disabled"; reg = <0x65a00000 0xcd00>; interrupt-names = "host"; - interrupts = <0 134 4>; + interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0>; clock-names = "ref", "bus_early", "suspend"; @@ -480,7 +486,7 @@ dr_mode = "host"; }; - usb-glue@65b00000 { + usb-controller@65b00000 { compatible = "socionext,uniphier-pro5-dwc3-glue", "simple-mfd"; #address-cells = <1>; @@ -534,7 +540,7 @@ status = "disabled"; reg = <0x65c00000 0xcd00>; interrupt-names = "host"; - interrupts = <0 137 4>; + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb2>; clock-names = "ref", "bus_early", "suspend"; @@ -544,7 +550,7 @@ dr_mode = "host"; }; - usb-glue@65d00000 { + usb-controller@65d00000 { compatible = "socionext,uniphier-pro5-dwc3-glue", "simple-mfd"; #address-cells = <1>; @@ -614,8 +620,7 @@ }; pcie_ep: pcie-ep@66000000 { - compatible = "socionext,uniphier-pro5-pcie-ep", - "snps,dw-pcie-ep"; + compatible = "socionext,uniphier-pro5-pcie-ep"; status = "disabled"; reg-names = "dbi", "dbi2", "link", "addr_space"; reg = <0x66000000 0x1000>, <0x66001000 0x1000>, @@ -650,7 +655,7 @@ reg = <0x68000000 0x20>, <0x68100000 0x1000>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 65 4>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; clock-names = "nand", "nand_x", "ecc"; @@ -663,7 +668,7 @@ compatible = "socionext,uniphier-sd-v3.1"; status = "disabled"; reg = <0x68400000 0x800>; - interrupts = <0 78 4>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_emmc>; clocks = <&sd_clk 1>; @@ -679,7 +684,7 @@ compatible = "socionext,uniphier-sd-v3.1"; status = "disabled"; reg = <0x68800000 0x800>; - interrupts = <0 76 4>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default", "uhs"; pinctrl-0 = <&pinctrl_sd>; pinctrl-1 = <&pinctrl_sd_uhs>; diff --git a/arch/arm/boot/dts/uniphier-pxs2-gentil.dts b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts index 759384b60663..5f18b926c50a 100644 --- a/arch/arm/boot/dts/uniphier-pxs2-gentil.dts +++ b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts @@ -99,3 +99,7 @@ &usb1 { status = "okay"; }; + +&ahci { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi index 03301ddb3403..ca4dccf56a67 100644 --- a/arch/arm/boot/dts/uniphier-pxs2.dtsi +++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi @@ -6,6 +6,7 @@ // Author: Masahiro Yamada <yamada.masahiro@socionext.com> #include <dt-bindings/gpio/uniphier-gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/thermal/thermal.h> / { @@ -161,7 +162,10 @@ compatible = "socionext,uniphier-system-cache"; reg = <0x500c0000 0x2000>, <0x503c0100 0x8>, <0x506c0000 0x400>; - interrupts = <0 174 4>, <0 175 4>, <0 190 4>, <0 191 4>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; cache-unified; cache-size = <(1280 * 1024)>; cache-sets = <512>; @@ -175,7 +179,7 @@ reg = <0x54006000 0x100>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 39 4>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; clocks = <&peri_clk 11>; @@ -188,7 +192,7 @@ reg = <0x54006100 0x100>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 216 4>; + interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; clocks = <&peri_clk 12>; @@ -199,7 +203,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006800 0x40>; - interrupts = <0 33 4>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; clocks = <&peri_clk 0>; @@ -210,7 +214,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006900 0x40>; - interrupts = <0 35 4>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; clocks = <&peri_clk 1>; @@ -221,7 +225,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006a00 0x40>; - interrupts = <0 37 4>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; clocks = <&peri_clk 2>; @@ -232,7 +236,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006b00 0x40>; - interrupts = <0 177 4>; + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; clocks = <&peri_clk 3>; @@ -259,7 +263,7 @@ audio@56000000 { compatible = "socionext,uniphier-pxs2-aio"; reg = <0x56000000 0x80000>; - interrupts = <0 144 4>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ain1>, <&pinctrl_ain2>, @@ -317,7 +321,7 @@ reg = <0x58780000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 41 4>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; clocks = <&peri_clk 4>; @@ -331,7 +335,7 @@ reg = <0x58781000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 42 4>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; clocks = <&peri_clk 5>; @@ -345,7 +349,7 @@ reg = <0x58782000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 43 4>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; clocks = <&peri_clk 6>; @@ -359,7 +363,7 @@ reg = <0x58783000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 44 4>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; clocks = <&peri_clk 7>; @@ -373,7 +377,7 @@ reg = <0x58784000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 45 4>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; clocks = <&peri_clk 8>; resets = <&peri_rst 8>; clock-frequency = <400000>; @@ -385,7 +389,7 @@ reg = <0x58785000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 25 4>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; clocks = <&peri_clk 9>; resets = <&peri_rst 9>; clock-frequency = <400000>; @@ -397,7 +401,7 @@ reg = <0x58786000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 26 4>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; clocks = <&peri_clk 10>; resets = <&peri_rst 10>; clock-frequency = <400000>; @@ -454,7 +458,7 @@ compatible = "socionext,uniphier-sd-v3.1.1"; status = "disabled"; reg = <0x5a000000 0x800>; - interrupts = <0 78 4>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_emmc>; clocks = <&sd_clk 1>; @@ -470,7 +474,7 @@ compatible = "socionext,uniphier-sd-v3.1.1"; status = "disabled"; reg = <0x5a400000 0x800>; - interrupts = <0 76 4>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default", "uhs"; pinctrl-0 = <&pinctrl_sd>; pinctrl-1 = <&pinctrl_sd_uhs>; @@ -515,7 +519,7 @@ xdmac: dma-controller@5fc10000 { compatible = "socionext,uniphier-xdmac"; reg = <0x5fc10000 0x5300>; - interrupts = <0 188 4>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; dma-channels = <16>; #dma-cells = <2>; }; @@ -530,14 +534,16 @@ timer@60000200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x60000200 0x20>; - interrupts = <1 11 0xf04>; + interrupts = <GIC_PPI 11 + (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_HIGH)>; clocks = <&arm_timer_clk>; }; timer@60000600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x60000600 0x20>; - interrupts = <1 13 0xf04>; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_HIGH)>; clocks = <&arm_timer_clk>; }; @@ -564,9 +570,9 @@ #reset-cells = <1>; }; - pvtctl: pvtctl { + pvtctl: thermal-sensor { compatible = "socionext,uniphier-pxs2-thermal"; - interrupts = <0 3 4>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; #thermal-sensor-cells = <0>; socionext,tmod-calibration = <0x0f86 0x6844>; }; @@ -576,7 +582,7 @@ compatible = "socionext,uniphier-pxs2-ave4"; status = "disabled"; reg = <0x65000000 0x8500>; - interrupts = <0 66 4>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ether_rgmii>; clock-names = "ether"; @@ -593,12 +599,52 @@ }; }; + ahci: sata@65600000 { + compatible = "socionext,uniphier-pxs2-ahci", + "generic-ahci"; + status = "disabled"; + reg = <0x65600000 0x10000>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sys_clk 28>; + resets = <&sys_rst 28>, <&ahci_rst 0>; + ports-implemented = <1>; + phys = <&ahci_phy>; + }; + + sata-controller@65700000 { + compatible = "socionext,uniphier-pxs2-ahci-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65700000 0x100>; + + ahci_rst: reset-controller@0 { + compatible = "socionext,uniphier-pxs2-ahci-reset"; + reg = <0x0 0x4>; + clock-names = "link"; + clocks = <&sys_clk 28>; + reset-names = "link"; + resets = <&sys_rst 28>; + #reset-cells = <1>; + }; + + ahci_phy: sata-phy@10 { + compatible = "socionext,uniphier-pxs2-ahci-phy"; + reg = <0x10 0x10>; + clock-names = "link"; + clocks = <&sys_clk 28>; + reset-names = "link", "phy"; + resets = <&sys_rst 28>, <&sys_rst 30>; + #phy-cells = <0>; + }; + }; + usb0: usb@65a00000 { compatible = "socionext,uniphier-dwc3", "snps,dwc3"; status = "disabled"; reg = <0x65a00000 0xcd00>; interrupt-names = "dwc_usb3"; - interrupts = <0 134 4>; + interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>; clock-names = "ref", "bus_early", "suspend"; @@ -609,7 +655,7 @@ dr_mode = "host"; }; - usb-glue@65b00000 { + usb-controller@65b00000 { compatible = "socionext,uniphier-pxs2-dwc3-glue", "simple-mfd"; #address-cells = <1>; @@ -694,7 +740,7 @@ status = "disabled"; reg = <0x65c00000 0xcd00>; interrupt-names = "dwc_usb3"; - interrupts = <0 137 4>; + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>; clock-names = "ref", "bus_early", "suspend"; @@ -704,7 +750,7 @@ dr_mode = "host"; }; - usb-glue@65d00000 { + usb-controller@65d00000 { compatible = "socionext,uniphier-pxs2-dwc3-glue", "simple-mfd"; #address-cells = <1>; @@ -780,7 +826,7 @@ reg = <0x68000000 0x20>, <0x68100000 0x1000>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 65 4>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; clock-names = "nand", "nand_x", "ecc"; diff --git a/arch/arm/boot/dts/uniphier-sld8-ref.dts b/arch/arm/boot/dts/uniphier-sld8-ref.dts index 6db949ec7411..2446f9e15360 100644 --- a/arch/arm/boot/dts/uniphier-sld8-ref.dts +++ b/arch/arm/boot/dts/uniphier-sld8-ref.dts @@ -36,11 +36,11 @@ }; ðsc { - interrupts = <0 8>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; }; &serialsc { - interrupts = <0 8>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; }; &serial0 { @@ -56,7 +56,7 @@ }; &gpio { - xirq0 { + xirq0-hog { gpio-hog; gpios = <UNIPHIER_GPIO_IRQ(0) 0>; input; diff --git a/arch/arm/boot/dts/uniphier-sld8.dtsi b/arch/arm/boot/dts/uniphier-sld8.dtsi index 96a766deb8d1..67b12dfe513b 100644 --- a/arch/arm/boot/dts/uniphier-sld8.dtsi +++ b/arch/arm/boot/dts/uniphier-sld8.dtsi @@ -6,6 +6,7 @@ // Author: Masahiro Yamada <yamada.masahiro@socionext.com> #include <dt-bindings/gpio/uniphier-gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> / { compatible = "socionext,uniphier-sld8"; @@ -55,7 +56,8 @@ compatible = "socionext,uniphier-system-cache"; reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>; - interrupts = <0 174 4>, <0 175 4>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; cache-unified; cache-size = <(256 * 1024)>; cache-sets = <256>; @@ -69,7 +71,7 @@ reg = <0x54006000 0x100>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 39 4>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; clocks = <&peri_clk 11>; @@ -80,7 +82,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006800 0x40>; - interrupts = <0 33 4>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; clocks = <&peri_clk 0>; @@ -91,7 +93,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006900 0x40>; - interrupts = <0 35 4>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; clocks = <&peri_clk 1>; @@ -102,7 +104,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006a00 0x40>; - interrupts = <0 37 4>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; clocks = <&peri_clk 2>; @@ -113,7 +115,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006b00 0x40>; - interrupts = <0 29 4>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; clocks = <&peri_clk 3>; @@ -144,7 +146,7 @@ reg = <0x58400000 0x40>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 41 1>; + interrupts = <GIC_SPI 41 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; clocks = <&peri_clk 4>; @@ -158,7 +160,7 @@ reg = <0x58480000 0x40>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 42 1>; + interrupts = <GIC_SPI 42 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; clocks = <&peri_clk 5>; @@ -172,7 +174,7 @@ reg = <0x58500000 0x40>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 43 1>; + interrupts = <GIC_SPI 43 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; clocks = <&peri_clk 6>; @@ -186,7 +188,7 @@ reg = <0x58580000 0x40>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 44 1>; + interrupts = <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; clocks = <&peri_clk 7>; @@ -244,8 +246,13 @@ dmac: dma-controller@5a000000 { compatible = "socionext,uniphier-mio-dmac"; reg = <0x5a000000 0x1000>; - interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>, - <0 71 4>, <0 72 4>, <0 73 4>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mio_clk 7>; resets = <&mio_rst 7>; #dma-cells = <1>; @@ -255,7 +262,7 @@ compatible = "socionext,uniphier-sd-v2.91"; status = "disabled"; reg = <0x5a400000 0x200>; - interrupts = <0 76 4>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default", "uhs"; pinctrl-0 = <&pinctrl_sd>; pinctrl-1 = <&pinctrl_sd_uhs>; @@ -275,7 +282,7 @@ compatible = "socionext,uniphier-sd-v2.91"; status = "disabled"; reg = <0x5a500000 0x200>; - interrupts = <0 78 4>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_emmc>; clocks = <&mio_clk 1>; @@ -293,7 +300,7 @@ compatible = "socionext,uniphier-ehci", "generic-ehci"; status = "disabled"; reg = <0x5a800100 0x100>; - interrupts = <0 80 4>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0>; clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 8>, @@ -307,7 +314,7 @@ compatible = "socionext,uniphier-ehci", "generic-ehci"; status = "disabled"; reg = <0x5a810100 0x100>; - interrupts = <0 81 4>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb1>; clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 9>, @@ -321,7 +328,7 @@ compatible = "socionext,uniphier-ehci", "generic-ehci"; status = "disabled"; reg = <0x5a820100 0x100>; - interrupts = <0 82 4>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb2>; clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 10>, @@ -362,14 +369,16 @@ timer@60000200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x60000200 0x20>; - interrupts = <1 11 0x104>; + interrupts = <GIC_PPI 11 + (GIC_CPU_MASK_RAW(1) | IRQ_TYPE_LEVEL_HIGH)>; clocks = <&arm_timer_clk>; }; timer@60000600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x60000600 0x20>; - interrupts = <1 13 0x104>; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_RAW(1) | IRQ_TYPE_LEVEL_HIGH)>; clocks = <&arm_timer_clk>; }; @@ -411,7 +420,7 @@ reg = <0x68000000 0x20>, <0x68100000 0x1000>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 65 4>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; clock-names = "nand", "nand_x", "ecc"; diff --git a/arch/arm/boot/dts/uniphier-support-card.dtsi b/arch/arm/boot/dts/uniphier-support-card.dtsi index 444802fee9fb..97e7d5db8eb8 100644 --- a/arch/arm/boot/dts/uniphier-support-card.dtsi +++ b/arch/arm/boot/dts/uniphier-support-card.dtsi @@ -8,13 +8,13 @@ &system_bus { status = "okay"; ranges = <1 0x00000000 0x42000000 0x02000000>; - interrupt-parent = <&gpio>; ethsc: ethernet@1,1f00000 { compatible = "smsc,lan9118", "smsc,lan9115"; reg = <1 0x01f00000 0x1000>; phy-mode = "mii"; reg-io-width = <4>; + interrupt-parent = <&gpio>; }; serialsc: serial@1,1fb0000 { @@ -22,5 +22,6 @@ reg = <1 0x01fb0000 0x20>; clock-frequency = <12288000>; reg-shift = <1>; + interrupt-parent = <&gpio>; }; }; diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts index 79f7cc241282..a520615f4d8d 100644 --- a/arch/arm/boot/dts/versatile-ab.dts +++ b/arch/arm/boot/dts/versatile-ab.dts @@ -391,7 +391,7 @@ reg = <0x101f4000 0x1000>; interrupts = <11>; clocks = <&xtal24mhz>, <&pclk>; - clock-names = "SSPCLK", "apb_pclk"; + clock-names = "sspclk", "apb_pclk"; }; fpga { diff --git a/arch/arm/boot/dts/vf610-bk4.dts b/arch/arm/boot/dts/vf610-bk4.dts index 830c85476b3d..551a4c3ff4fa 100644 --- a/arch/arm/boot/dts/vf610-bk4.dts +++ b/arch/arm/boot/dts/vf610-bk4.dts @@ -61,7 +61,7 @@ regulator-max-microvolt = <3300000>; }; - spi-gpio { + spi { compatible = "spi-gpio"; pinctrl-0 = <&pinctrl_gpio_spi>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/vf610-pinfunc.h b/arch/arm/boot/dts/vf610-pinfunc.h index f1e5a7cf58a9..b7b7322a2d1b 100644 --- a/arch/arm/boot/dts/vf610-pinfunc.h +++ b/arch/arm/boot/dts/vf610-pinfunc.h @@ -420,7 +420,7 @@ #define VF610_PAD_PTD29__FTM3_CH2 0x104 0x000 ALT4 0x0 #define VF610_PAD_PTD29__DSPI2_SIN 0x104 0x000 ALT5 0x0 #define VF610_PAD_PTD29__DEBUG_OUT11 0x104 0x000 ALT7 0x0 -#define VF610_PAD_PTD28__GPIO_66 0x108 0x000 ALT0 0x0 +#define VF610_PAD_PTD28__GPIO_66 0x108 0x000 ALT0 0x0 #define VF610_PAD_PTD28__FB_AD28 0x108 0x000 ALT1 0x0 #define VF610_PAD_PTD28__NF_IO12 0x108 0x000 ALT2 0x0 #define VF610_PAD_PTD28__I2C2_SCL 0x108 0x34C ALT3 0x1 @@ -802,5 +802,55 @@ #define VF610_PAD_PTE28__EWM_OUT 0x214 0x000 ALT7 0x0 #define VF610_PAD_PTA7__GPIO_134 0x218 0x000 ALT0 0x0 #define VF610_PAD_PTA7__VIU_PIX_CLK 0x218 0x3AC ALT1 0x1 +#define VF610_PAD_DDR_RESETB 0x21c 0x000 ALT0 0x0 +#define VF610_PAD_DDR_A15__DDR_A_15 0x220 0x000 ALT0 0x0 +#define VF610_PAD_DDR_A14__DDR_A_14 0x224 0x000 ALT0 0x0 +#define VF610_PAD_DDR_A13__DDR_A_13 0x228 0x000 ALT0 0x0 +#define VF610_PAD_DDR_A12__DDR_A_12 0x22c 0x000 ALT0 0x0 +#define VF610_PAD_DDR_A11__DDR_A_11 0x230 0x000 ALT0 0x0 +#define VF610_PAD_DDR_A10__DDR_A_10 0x234 0x000 ALT0 0x0 +#define VF610_PAD_DDR_A9__DDR_A_9 0x238 0x000 ALT0 0x0 +#define VF610_PAD_DDR_A8__DDR_A_8 0x23c 0x000 ALT0 0x0 +#define VF610_PAD_DDR_A7__DDR_A_7 0x240 0x000 ALT0 0x0 +#define VF610_PAD_DDR_A6__DDR_A_6 0x244 0x000 ALT0 0x0 +#define VF610_PAD_DDR_A5__DDR_A_5 0x248 0x000 ALT0 0x0 +#define VF610_PAD_DDR_A4__DDR_A_4 0x24c 0x000 ALT0 0x0 +#define VF610_PAD_DDR_A3__DDR_A_3 0x250 0x000 ALT0 0x0 +#define VF610_PAD_DDR_A2__DDR_A_2 0x254 0x000 ALT0 0x0 +#define VF610_PAD_DDR_A1__DDR_A_1 0x258 0x000 ALT0 0x0 +#define VF610_PAD_DDR_A0__DDR_A_0 0x25c 0x000 ALT0 0x0 +#define VF610_PAD_DDR_BA2__DDR_BA_2 0x260 0x000 ALT0 0x0 +#define VF610_PAD_DDR_BA1__DDR_BA_1 0x264 0x000 ALT0 0x0 +#define VF610_PAD_DDR_BA0__DDR_BA_0 0x268 0x000 ALT0 0x0 +#define VF610_PAD_DDR_CAS__DDR_CAS_B 0x26c 0x000 ALT0 0x0 +#define VF610_PAD_DDR_CKE__DDR_CKE_0 0x270 0x000 ALT0 0x0 +#define VF610_PAD_DDR_CLK__DDR_CLK_0 0x274 0x000 ALT0 0x0 +#define VF610_PAD_DDR_CS__DDR_CS_B_0 0x278 0x000 ALT0 0x0 +#define VF610_PAD_DDR_D15__DDR_D_15 0x27c 0x000 ALT0 0x0 +#define VF610_PAD_DDR_D14__DDR_D_14 0x280 0x000 ALT0 0x0 +#define VF610_PAD_DDR_D13__DDR_D_13 0x284 0x000 ALT0 0x0 +#define VF610_PAD_DDR_D12__DDR_D_12 0x288 0x000 ALT0 0x0 +#define VF610_PAD_DDR_D11__DDR_D_11 0x28c 0x000 ALT0 0x0 +#define VF610_PAD_DDR_D10__DDR_D_10 0x290 0x000 ALT0 0x0 +#define VF610_PAD_DDR_D9__DDR_D_9 0x294 0x000 ALT0 0x0 +#define VF610_PAD_DDR_D8__DDR_D_8 0x298 0x000 ALT0 0x0 +#define VF610_PAD_DDR_D7__DDR_D_7 0x29c 0x000 ALT0 0x0 +#define VF610_PAD_DDR_D6__DDR_D_6 0x2a0 0x000 ALT0 0x0 +#define VF610_PAD_DDR_D5__DDR_D_5 0x2a4 0x000 ALT0 0x0 +#define VF610_PAD_DDR_D4__DDR_D_4 0x2a8 0x000 ALT0 0x0 +#define VF610_PAD_DDR_D3__DDR_D_3 0x2ac 0x000 ALT0 0x0 +#define VF610_PAD_DDR_D2__DDR_D_2 0x2b0 0x000 ALT0 0x0 +#define VF610_PAD_DDR_D1__DDR_D_1 0x2b4 0x000 ALT0 0x0 +#define VF610_PAD_DDR_D0__DDR_D_0 0x2b8 0x000 ALT0 0x0 +#define VF610_PAD_DDR_DQM1__DDR_DQM_1 0x2bc 0x000 ALT0 0x0 +#define VF610_PAD_DDR_DQM0__DDR_DQM_0 0x2c0 0x000 ALT0 0x0 +#define VF610_PAD_DDR_DQS1__DDR_DQS_1 0x2c4 0x000 ALT0 0x0 +#define VF610_PAD_DDR_DQS0__DDR_DQS_0 0x2c8 0x000 ALT0 0x0 +#define VF610_PAD_DDR_RAS__DDR_RAS_B 0x2cc 0x000 ALT0 0x0 +#define VF610_PAD_DDR_WE__DDR_WE_B 0x2d0 0x000 ALT0 0x0 +#define VF610_PAD_DDR_ODT1__DDR_ODT_0 0x2d4 0x000 ALT0 0x0 +#define VF610_PAD_DDR_ODT0__DDR_ODT_1 0x2d8 0x000 ALT0 0x0 +#define VF610_PAD_DDR_DDRBYTE1__DDR_DDRBYTE1 0x2dc 0x000 ALT0 0x0 +#define VF610_PAD_DDR_DDRBYTE2__DDR_DDRBYTE2 0x2e0 0x000 ALT0 0x0 #endif diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts index dbb5ffcdcec4..6c246d5aa032 100644 --- a/arch/arm/boot/dts/vf610-twr.dts +++ b/arch/arm/boot/dts/vf610-twr.dts @@ -169,7 +169,7 @@ VDDA-supply = <®_3p3v>; VDDIO-supply = <®_3p3v>; clocks = <&clks VF610_CLK_SAI2>; - }; + }; }; &iomuxc { diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts index 1f9686c33a84..42ed4a04a12e 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts @@ -288,7 +288,7 @@ }; }; - spi0 { + spi-0 { compatible = "spi-gpio"; pinctrl-0 = <&pinctrl_gpio_spi0>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi index 956182d08e74..2fba923821d0 100644 --- a/arch/arm/boot/dts/vf610.dtsi +++ b/arch/arm/boot/dts/vf610.dtsi @@ -2,7 +2,6 @@ // // Copyright 2013 Freescale Semiconductor, Inc. - #include "vf500.dtsi" &a5_cpu { diff --git a/arch/arm/configs/aspeed_g4_defconfig b/arch/arm/configs/aspeed_g4_defconfig index 67feb060bb19..a5c65d28ca63 100644 --- a/arch/arm/configs/aspeed_g4_defconfig +++ b/arch/arm/configs/aspeed_g4_defconfig @@ -7,6 +7,7 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 CONFIG_CGROUPS=y +CONFIG_NAMESPACES=y CONFIG_BLK_DEV_INITRD=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZO is not set @@ -23,12 +24,9 @@ CONFIG_VMSPLIT_2G=y CONFIG_AEABI=y CONFIG_UACCESS_WITH_MEMCPY=y # CONFIG_ATAGS is not set -CONFIG_ARM_APPENDED_DTB=y -CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_KEXEC=y CONFIG_JUMP_LABEL=y CONFIG_STRICT_KERNEL_RWX=y -# CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEBUG_FS is not set # CONFIG_MQ_IOSCHED_DEADLINE is not set # CONFIG_MQ_IOSCHED_KYBER is not set @@ -47,7 +45,11 @@ CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_SYN_COOKIES=y # CONFIG_INET_DIAG is not set +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y +CONFIG_IPV6_OPTIMISTIC_DAD=y # CONFIG_IPV6_SIT is not set +CONFIG_IPV6_MULTIPLE_TABLES=y CONFIG_NETFILTER=y # CONFIG_NETFILTER_ADVANCED is not set CONFIG_VLAN_8021Q=y @@ -66,6 +68,7 @@ CONFIG_MTD_UBI=y CONFIG_MTD_UBI_FASTMAP=y CONFIG_MTD_UBI_BLOCK=y CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_NBD=y CONFIG_EEPROM_AT24=y CONFIG_NETDEVICES=y CONFIG_NETCONSOLE=y @@ -145,6 +148,7 @@ CONFIG_SENSORS_ASPEED=y CONFIG_SENSORS_IIO_HWMON=y CONFIG_SENSORS_LM75=y CONFIG_SENSORS_NCT7904=y +CONFIG_SENSORS_OCC_P8_I2C=y CONFIG_PMBUS=y CONFIG_SENSORS_ADM1275=y CONFIG_SENSORS_IBM_CFFPS=y diff --git a/arch/arm/configs/aspeed_g5_defconfig b/arch/arm/configs/aspeed_g5_defconfig index 247ab72b2590..c7c11cbaa39d 100644 --- a/arch/arm/configs/aspeed_g5_defconfig +++ b/arch/arm/configs/aspeed_g5_defconfig @@ -7,6 +7,7 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 CONFIG_CGROUPS=y +CONFIG_NAMESPACES=y CONFIG_BLK_DEV_INITRD=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZO is not set @@ -33,7 +34,6 @@ CONFIG_VFP=y CONFIG_NEON=y CONFIG_KERNEL_MODE_NEON=y CONFIG_JUMP_LABEL=y -# CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEBUG_FS is not set # CONFIG_MQ_IOSCHED_DEADLINE is not set # CONFIG_MQ_IOSCHED_KYBER is not set @@ -65,6 +65,7 @@ CONFIG_NETFILTER=y # CONFIG_NETFILTER_ADVANCED is not set CONFIG_VLAN_8021Q=y CONFIG_NET_NCSI=y +CONFIG_MCTP=y # CONFIG_WIRELESS is not set CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y @@ -82,6 +83,8 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=y CONFIG_EEPROM_AT24=y CONFIG_EEPROM_AT25=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y CONFIG_NETDEVICES=y CONFIG_NETCONSOLE=y # CONFIG_NET_VENDOR_ALACRITECH is not set @@ -119,6 +122,8 @@ CONFIG_FTGMAC100=y # CONFIG_NET_VENDOR_WIZNET is not set CONFIG_BROADCOM_PHY=y CONFIG_REALTEK_PHY=y +CONFIG_MCTP_SERIAL=y +CONFIG_MCTP_TRANSPORT_I2C=y # CONFIG_USB_NET_DRIVERS is not set # CONFIG_WLAN is not set CONFIG_INPUT_EVDEV=y @@ -146,6 +151,8 @@ CONFIG_IPMI_KCS_BMC_CDEV_IPMI=y CONFIG_IPMI_KCS_BMC_SERIO=y CONFIG_ASPEED_BT_IPMI_BMC=y CONFIG_HW_RANDOM_TIMERIOMEM=y +CONFIG_TCG_TPM=y +CONFIG_TCG_TIS_I2C=y # CONFIG_I2C_COMPAT is not set CONFIG_I2C_CHARDEV=y CONFIG_I2C_MUX_GPIO=y @@ -180,6 +187,7 @@ CONFIG_SENSORS_IR38064=y CONFIG_SENSORS_ISL68137=y CONFIG_SENSORS_LM25066=y CONFIG_SENSORS_MAX31785=y +CONFIG_SENSORS_MP5023=y CONFIG_SENSORS_UCD9000=y CONFIG_SENSORS_UCD9200=y CONFIG_SENSORS_SBTSI=y @@ -200,6 +208,9 @@ CONFIG_USB_DYNAMIC_MINORS=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_HCD_PLATFORM=y +CONFIG_USB_STORAGE=y +CONFIG_USB_SERIAL=y +CONFIG_USB_SERIAL_PL2303=y CONFIG_USB_GADGET=y CONFIG_USB_ASPEED_VHUB=y CONFIG_USB_CONFIGFS=y @@ -243,9 +254,13 @@ CONFIG_FSI_MASTER_ASPEED=y CONFIG_FSI_SCOM=y CONFIG_FSI_SBEFIFO=y CONFIG_FSI_OCC=y +CONFIG_PECI=y +CONFIG_PECI_CPU=y +CONFIG_PECI_ASPEED=y CONFIG_EXT4_FS=y CONFIG_FANOTIFY=y CONFIG_OVERLAY_FS=y +CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_JFFS2_FS=y # CONFIG_JFFS2_FS_WRITEBUFFER is not set @@ -261,6 +276,9 @@ CONFIG_PSTORE_PMSG=y CONFIG_PSTORE_FTRACE=y CONFIG_PSTORE_RAM=y # CONFIG_NETWORK_FILESYSTEMS is not set +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y +# CONFIG_SECURITYFS is not set CONFIG_HARDENED_USERCOPY=y CONFIG_FORTIFY_SOURCE=y CONFIG_CRYPTO_HMAC=y diff --git a/arch/arm/configs/assabet_defconfig b/arch/arm/configs/assabet_defconfig index 801383e4135d..8ba8eb7a4adf 100644 --- a/arch/arm/configs/assabet_defconfig +++ b/arch/arm/configs/assabet_defconfig @@ -1,6 +1,8 @@ CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y +CONFIG_ARCH_MULTI_V4=y +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_SA1100=y CONFIG_SA1100_ASSABET=y CONFIG_CMDLINE="mem=32M console=ttySA0,38400n8 initrd=0xc0800000,3M root=/dev/ram" diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig index da90ce9cd42e..9ea08337b174 100644 --- a/arch/arm/configs/at91_dt_defconfig +++ b/arch/arm/configs/at91_dt_defconfig @@ -40,7 +40,6 @@ CONFIG_IP_PNP_RARP=y # CONFIG_INET_DIAG is not set CONFIG_IPV6_SIT_6RD=y CONFIG_CAN=y -CONFIG_CAN_AT91=y CONFIG_CFG80211=y CONFIG_MAC80211=y CONFIG_DEVTMPFS=y @@ -81,6 +80,7 @@ CONFIG_DM9000=y # CONFIG_NET_VENDOR_STMICRO is not set CONFIG_DAVICOM_PHY=y CONFIG_MICREL_PHY=y +CONFIG_CAN_AT91=y CONFIG_LIBERTAS=m CONFIG_LIBERTAS_SDIO=m CONFIG_LIBERTAS_SPI=m @@ -196,7 +196,6 @@ CONFIG_RTC_DRV_AT91SAM9=y CONFIG_DMADEVICES=y CONFIG_AT_HDMAC=y CONFIG_AT_XDMAC=y -CONFIG_MICROCHIP_PIT64B=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_IIO=y CONFIG_AT91_ADC=y diff --git a/arch/arm/configs/badge4_defconfig b/arch/arm/configs/badge4_defconfig index 506f3378da07..337e5c9718ae 100644 --- a/arch/arm/configs/badge4_defconfig +++ b/arch/arm/configs/badge4_defconfig @@ -1,12 +1,13 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_EXPERT=y +CONFIG_ARCH_MULTI_V4=y +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_SA1100=y CONFIG_SA1100_BADGE4=y CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="init=/linuxrc root=/dev/mtdblock3" CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_FPE_NWFPE=y -CONFIG_BINFMT_AOUT=m CONFIG_MODULES=y CONFIG_MODVERSIONS=y CONFIG_PARTITION_ADVANCED=y diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig index c4d2e2334b6e..a51babd178c2 100644 --- a/arch/arm/configs/bcm2835_defconfig +++ b/arch/arm/configs/bcm2835_defconfig @@ -1,6 +1,6 @@ # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SYSVIPC=y -CONFIG_NO_HZ=y +CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT_VOLUNTARY=y CONFIG_BSD_PROCESS_ACCT=y diff --git a/arch/arm/configs/cerfcube_defconfig b/arch/arm/configs/cerfcube_defconfig index 7e6f7dfa3023..9ada868e2648 100644 --- a/arch/arm/configs/cerfcube_defconfig +++ b/arch/arm/configs/cerfcube_defconfig @@ -1,6 +1,8 @@ CONFIG_SYSVIPC=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_LOG_BUF_SHIFT=14 +CONFIG_ARCH_MULTI_V4=y +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_SA1100=y CONFIG_SA1100_CERF=y CONFIG_SA1100_CERF_FLASH_16MB=y diff --git a/arch/arm/configs/cm_x300_defconfig b/arch/arm/configs/cm_x300_defconfig index 31f41159bef2..95144e380b4b 100644 --- a/arch/arm/configs/cm_x300_defconfig +++ b/arch/arm/configs/cm_x300_defconfig @@ -1,7 +1,7 @@ CONFIG_LOCALVERSION="-cm-x300" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SYSVIPC=y -CONFIG_NO_HZ=y +CONFIG_NO_HZ_IDLE=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=18 diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig index d35cc59ce847..2a2d2cb3ce2e 100644 --- a/arch/arm/configs/collie_defconfig +++ b/arch/arm/configs/collie_defconfig @@ -5,6 +5,8 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y # CONFIG_BASE_FULL is not set # CONFIG_EPOLL is not set +CONFIG_ARCH_MULTI_V4=y +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_SA1100=y CONFIG_SA1100_COLLIE=y CONFIG_CMDLINE="noinitrd root=/dev/mtdblock2 rootfstype=jffs2 fbcon=rotate:1" diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig index 1f137f74050f..df84640f4f57 100644 --- a/arch/arm/configs/corgi_defconfig +++ b/arch/arm/configs/corgi_defconfig @@ -16,7 +16,6 @@ CONFIG_MACH_HUSKY=y CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 debug" CONFIG_FPE_NWFPE=y -CONFIG_BINFMT_AOUT=m CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index fc71a03a9c8c..821d966c95a5 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -1,6 +1,6 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y -CONFIG_NO_HZ=y +CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT=y CONFIG_IKCONFIG=y diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig index 16ed5c110e8d..ff37f46c82fb 100644 --- a/arch/arm/configs/dove_defconfig +++ b/arch/arm/configs/dove_defconfig @@ -1,5 +1,5 @@ CONFIG_SYSVIPC=y -CONFIG_NO_HZ=y +CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_EXPERT=y @@ -116,7 +116,6 @@ CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_2=y CONFIG_NLS_UTF8=y CONFIG_TIMER_STATS=y -CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_CRYPTO_NULL=y CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_PCBC=m @@ -136,6 +135,7 @@ CONFIG_CRC_CCITT=y CONFIG_LIBCRC32C=y CONFIG_PRINTK_TIME=y # CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y # CONFIG_SCHED_DEBUG is not set diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index 1ce74f46e114..deb24a4bd011 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -1,5 +1,5 @@ CONFIG_SYSVIPC=y -CONFIG_NO_HZ=y +CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT=y CONFIG_CGROUPS=y @@ -374,8 +374,8 @@ CONFIG_FONTS=y CONFIG_FONT_7x14=y CONFIG_PRINTK_TIME=y CONFIG_DYNAMIC_DEBUG=y -CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y CONFIG_SOFTLOCKUP_DETECTOR=y diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig index 1a41391d7367..ef7b0a0aee3a 100644 --- a/arch/arm/configs/ezx_defconfig +++ b/arch/arm/configs/ezx_defconfig @@ -1,7 +1,7 @@ CONFIG_LOCALVERSION="-ezx200910312315" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SYSVIPC=y -CONFIG_NO_HZ=y +CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT=y CONFIG_LOG_BUF_SHIFT=14 @@ -25,7 +25,6 @@ CONFIG_CPU_FREQ_GOV_ONDEMAND=m CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m CONFIG_CPU_IDLE=y CONFIG_FPE_NWFPE=y -CONFIG_BINFMT_AOUT=m CONFIG_PM=y CONFIG_APM_EMULATION=y CONFIG_MODULES=y diff --git a/arch/arm/configs/footbridge_defconfig b/arch/arm/configs/footbridge_defconfig index 504070812ad0..87c489337d0e 100644 --- a/arch/arm/configs/footbridge_defconfig +++ b/arch/arm/configs/footbridge_defconfig @@ -4,12 +4,13 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y # CONFIG_HOTPLUG is not set +CONFIG_ARCH_MULTI_V4=y +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_FOOTBRIDGE=y CONFIG_ARCH_EBSA285_HOST=y CONFIG_ARCH_NETWINDER=y CONFIG_FPE_NWFPE=y CONFIG_FPE_NWFPE_XP=y -CONFIG_BINFMT_AOUT=y CONFIG_MODULES=y CONFIG_PARTITION_ADVANCED=y CONFIG_ACORN_PARTITION=y diff --git a/arch/arm/configs/h3600_defconfig b/arch/arm/configs/h3600_defconfig index 5bd1ec539610..4e272875c797 100644 --- a/arch/arm/configs/h3600_defconfig +++ b/arch/arm/configs/h3600_defconfig @@ -4,6 +4,8 @@ CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y +CONFIG_ARCH_MULTI_V4=y +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_SA1100=y CONFIG_SA1100_H3600=y # CONFIG_CPU_FREQ_STAT is not set diff --git a/arch/arm/configs/hackkit_defconfig b/arch/arm/configs/hackkit_defconfig index b9327b2eacd3..3c91a851fd08 100644 --- a/arch/arm/configs/hackkit_defconfig +++ b/arch/arm/configs/hackkit_defconfig @@ -1,13 +1,14 @@ CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y +CONFIG_ARCH_MULTI_V4=y +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_SA1100=y CONFIG_SA1100_HACKKIT=y CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="console=ttySA0,115200 root=/dev/ram0 initrd=0xc0400000,8M init=/rootshell" CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_FPE_NWFPE=y -CONFIG_BINFMT_AOUT=y CONFIG_MODULES=y CONFIG_NET=y CONFIG_PACKET=y diff --git a/arch/arm/configs/hisi_defconfig b/arch/arm/configs/hisi_defconfig index 1db5356b1ccd..0376a65e8bc1 100644 --- a/arch/arm/configs/hisi_defconfig +++ b/arch/arm/configs/hisi_defconfig @@ -1,4 +1,4 @@ -CONFIG_NO_HZ=y +CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT=y CONFIG_BLK_DEV_INITRD=y diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index bfa2a95638af..711a79e9be00 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -1,6 +1,6 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y -CONFIG_NO_HZ=y +CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT=y CONFIG_LOG_BUF_SHIFT=14 diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 01012537a9b9..6429c4106ab5 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -1,6 +1,6 @@ CONFIG_KERNEL_LZO=y CONFIG_SYSVIPC=y -CONFIG_NO_HZ=y +CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_BPF_SYSCALL=y CONFIG_PREEMPT_VOLUNTARY=y @@ -65,7 +65,6 @@ CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_NETFILTER=y CONFIG_CAN=y -CONFIG_CAN_FLEXCAN=y CONFIG_BT=y CONFIG_BT_BNEP=m CONFIG_BT_HCIUART=y @@ -136,6 +135,7 @@ CONFIG_SMSC911X=y # CONFIG_NET_VENDOR_STMICRO is not set CONFIG_MICREL_PHY=y CONFIG_AT803X_PHY=y +CONFIG_CAN_FLEXCAN=y CONFIG_USB_PEGASUS=m CONFIG_USB_RTL8150=m CONFIG_USB_RTL8152=y diff --git a/arch/arm/configs/integrator_defconfig b/arch/arm/configs/integrator_defconfig index 9ca43c84b452..61711d4bbf74 100644 --- a/arch/arm/configs/integrator_defconfig +++ b/arch/arm/configs/integrator_defconfig @@ -1,5 +1,5 @@ CONFIG_SYSVIPC=y -CONFIG_NO_HZ=y +CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT=y CONFIG_IKCONFIG=y diff --git a/arch/arm/configs/iop32x_defconfig b/arch/arm/configs/iop32x_defconfig index c16e92cdfd00..19e30e790d35 100644 --- a/arch/arm/configs/iop32x_defconfig +++ b/arch/arm/configs/iop32x_defconfig @@ -12,7 +12,6 @@ CONFIG_MACH_N2100=y CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp cachepolicy=writealloc" CONFIG_FPE_NWFPE=y -CONFIG_BINFMT_AOUT=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_PARTITION_ADVANCED=y diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig index 6b65ac2a72e7..3cb995b9616a 100644 --- a/arch/arm/configs/ixp4xx_defconfig +++ b/arch/arm/configs/ixp4xx_defconfig @@ -99,7 +99,7 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_EEPROM_AT24=y -CONFIG_EEPROM_LEGACY=y +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SCSI_PROC_FS is not set CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_BSG is not set diff --git a/arch/arm/configs/jornada720_defconfig b/arch/arm/configs/jornada720_defconfig index 3dcf89d3e1f1..ae1d68da4f2a 100644 --- a/arch/arm/configs/jornada720_defconfig +++ b/arch/arm/configs/jornada720_defconfig @@ -1,12 +1,13 @@ CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_ARCH_MULTI_V4=y +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_SA1100=y CONFIG_SA1100_JORNADA720=y CONFIG_SA1100_JORNADA720_SSP=y CONFIG_UNUSED_BOARD_FILES=y CONFIG_FPE_NWFPE=y -CONFIG_BINFMT_AOUT=y CONFIG_PM=y CONFIG_MODULES=y CONFIG_NET=y diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig index 68b89b90ca29..4a5b9adbf2a1 100644 --- a/arch/arm/configs/keystone_defconfig +++ b/arch/arm/configs/keystone_defconfig @@ -109,8 +109,6 @@ CONFIG_IP6_NF_IPTABLES=m CONFIG_IP_SCTP=y CONFIG_VLAN_8021Q=y CONFIG_CAN=m -CONFIG_CAN_C_CAN=m -CONFIG_CAN_C_CAN_PLATFORM=m CONFIG_PCI=y CONFIG_PCI_MSI=y CONFIG_DEVTMPFS=y @@ -137,6 +135,8 @@ CONFIG_TI_KEYSTONE_NETCP_ETHSS=y CONFIG_MARVELL_PHY=y CONFIG_MICREL_PHY=y CONFIG_DP83867_PHY=y +CONFIG_CAN_C_CAN=m +CONFIG_CAN_C_CAN_PLATFORM=m CONFIG_INPUT_EVDEV=m CONFIG_INPUT_MISC=y CONFIG_INPUT_GPIO_DECODER=m @@ -152,7 +152,6 @@ CONFIG_SPI=y CONFIG_SPI_CADENCE_QUADSPI=y CONFIG_SPI_DAVINCI=y CONFIG_SPI_SPIDEV=y -CONFIG_PTP_1588_CLOCK=y CONFIG_PINCTRL_SINGLE=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y @@ -224,7 +223,6 @@ CONFIG_NFSD=y CONFIG_NFSD_V3_ACL=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y -CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_CRYPTO_USER=y CONFIG_CRYPTO_AUTHENC=y CONFIG_CRYPTO_CBC=y @@ -236,5 +234,6 @@ CONFIG_CRYPTO_USER_API_HASH=y CONFIG_CRYPTO_USER_API_SKCIPHER=y CONFIG_DMA_CMA=y CONFIG_PRINTK_TIME=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_DEBUG_SHIRQ=y CONFIG_DEBUG_USER=y diff --git a/arch/arm/configs/lart_defconfig b/arch/arm/configs/lart_defconfig index 0c2f19d756c0..916177d07a39 100644 --- a/arch/arm/configs/lart_defconfig +++ b/arch/arm/configs/lart_defconfig @@ -1,6 +1,8 @@ CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y +CONFIG_ARCH_MULTI_V4=y +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_SA1100=y CONFIG_SA1100_LART=y CONFIG_UNUSED_BOARD_FILES=y @@ -8,7 +10,6 @@ CONFIG_CMDLINE="console=ttySA0,9600 root=/dev/ram" CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_FPE_NWFPE=y -CONFIG_BINFMT_AOUT=y CONFIG_PM=y CONFIG_MODULES=y CONFIG_NET=y diff --git a/arch/arm/configs/lpc18xx_defconfig b/arch/arm/configs/lpc18xx_defconfig index 142c1700f450..56eae6a0a311 100644 --- a/arch/arm/configs/lpc18xx_defconfig +++ b/arch/arm/configs/lpc18xx_defconfig @@ -150,9 +150,9 @@ CONFIG_JFFS2_FS=y CONFIG_CRC_ITU_T=y CONFIG_CRC7=y CONFIG_PRINTK_TIME=y -CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y # CONFIG_ENABLE_MUST_CHECK is not set # CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y # CONFIG_SLUB_DEBUG is not set diff --git a/arch/arm/configs/lpc32xx_defconfig b/arch/arm/configs/lpc32xx_defconfig index 8a41fe4e62f1..fabb66a53350 100644 --- a/arch/arm/configs/lpc32xx_defconfig +++ b/arch/arm/configs/lpc32xx_defconfig @@ -1,5 +1,5 @@ CONFIG_SYSVIPC=y -CONFIG_NO_HZ=y +CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT=y CONFIG_IKCONFIG=y diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig index 9cbb63c69436..5a8776f6aba3 100644 --- a/arch/arm/configs/magician_defconfig +++ b/arch/arm/configs/magician_defconfig @@ -1,5 +1,5 @@ CONFIG_SYSVIPC=y -CONFIG_NO_HZ=y +CONFIG_NO_HZ_IDLE=y CONFIG_PREEMPT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y diff --git a/arch/arm/configs/milbeaut_m10v_defconfig b/arch/arm/configs/milbeaut_m10v_defconfig index 58810e98de3d..6f6b5d0918f7 100644 --- a/arch/arm/configs/milbeaut_m10v_defconfig +++ b/arch/arm/configs/milbeaut_m10v_defconfig @@ -1,5 +1,5 @@ CONFIG_SYSVIPC=y -CONFIG_NO_HZ=y +CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_CGROUPS=y CONFIG_BLK_DEV_INITRD=y diff --git a/arch/arm/configs/mmp2_defconfig b/arch/arm/configs/mmp2_defconfig index 4d39c615117b..7984640e994e 100644 --- a/arch/arm/configs/mmp2_defconfig +++ b/arch/arm/configs/mmp2_defconfig @@ -73,10 +73,10 @@ CONFIG_ROOT_NFS=y CONFIG_CRC_CCITT=y CONFIG_PRINTK_TIME=y CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y # CONFIG_DEBUG_PREEMPT is not set -CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y # CONFIG_DYNAMIC_DEBUG is not set CONFIG_DEBUG_USER=y CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/moxart_defconfig b/arch/arm/configs/moxart_defconfig index 082a38a14c12..ea31f116d577 100644 --- a/arch/arm/configs/moxart_defconfig +++ b/arch/arm/configs/moxart_defconfig @@ -1,6 +1,6 @@ # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SYSVIPC=y -CONFIG_NO_HZ=y +CONFIG_NO_HZ_IDLE=y CONFIG_PREEMPT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y diff --git a/arch/arm/configs/mps2_defconfig b/arch/arm/configs/mps2_defconfig index 700568474549..3ed73f184d83 100644 --- a/arch/arm/configs/mps2_defconfig +++ b/arch/arm/configs/mps2_defconfig @@ -94,9 +94,9 @@ CONFIG_NFS_V4_2=y CONFIG_ROOT_NFS=y CONFIG_NLS=y CONFIG_PRINTK_TIME=y -CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y # CONFIG_ENABLE_MUST_CHECK is not set # CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_DEBUG_FS=y # CONFIG_SLUB_DEBUG is not set # CONFIG_SCHED_DEBUG is not set diff --git a/arch/arm/configs/multi_v4t_defconfig b/arch/arm/configs/multi_v4t_defconfig index 6c3e45b71ab5..e2fd822f741a 100644 --- a/arch/arm/configs/multi_v4t_defconfig +++ b/arch/arm/configs/multi_v4t_defconfig @@ -71,8 +71,6 @@ CONFIG_POWER_RESET_SYSCON_POWEROFF=y CONFIG_WATCHDOG=y CONFIG_GPIO_WATCHDOG=y CONFIG_AT91RM9200_WATCHDOG=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_GPIO=y CONFIG_FB=y CONFIG_FB_CLPS711X=y diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig index e0be0e0023f3..60fc52b95690 100644 --- a/arch/arm/configs/multi_v5_defconfig +++ b/arch/arm/configs/multi_v5_defconfig @@ -1,5 +1,5 @@ CONFIG_SYSVIPC=y -CONFIG_NO_HZ=y +CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT=y CONFIG_LOG_BUF_SHIFT=19 @@ -149,7 +149,6 @@ CONFIG_SPI_SUN6I=y CONFIG_GPIO_ASPEED=m CONFIG_GPIO_ASPEED_SGPIO=y CONFIG_GPIO_MXC=y -CONFIG_POWER_RESET=y CONFIG_POWER_RESET_GPIO=y CONFIG_POWER_RESET_QNAP=y CONFIG_SENSORS_ADT7475=y @@ -290,8 +289,8 @@ CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_DEV_MARVELL_CESA=y CONFIG_CRC_CCITT=y CONFIG_LIBCRC32C=y -CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y # CONFIG_SCHED_DEBUG is not set diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index e52edcc8ec41..54a6dc0aa5a4 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -1,5 +1,5 @@ CONFIG_SYSVIPC=y -CONFIG_NO_HZ=y +CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_CGROUPS=y CONFIG_BLK_DEV_INITRD=y @@ -167,12 +167,6 @@ CONFIG_NET_DSA=m CONFIG_QRTR=m CONFIG_QRTR_SMD=m CONFIG_CAN=y -CONFIG_CAN_AT91=m -CONFIG_CAN_FLEXCAN=m -CONFIG_CAN_SUN4I=y -CONFIG_CAN_XILINXCAN=y -CONFIG_CAN_RCAR=m -CONFIG_CAN_MCP251X=y CONFIG_BT=m CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_BCM=y @@ -260,7 +254,6 @@ CONFIG_SATA_HIGHBANK=y CONFIG_SATA_MV=y CONFIG_SATA_RCAR=y CONFIG_NETDEVICES=y -CONFIG_NET_VENDOR_ASIX=y CONFIG_VIRTIO_NET=y CONFIG_B53_SPI_DRIVER=m CONFIG_B53_MDIO_DRIVER=m @@ -300,6 +293,12 @@ CONFIG_MARVELL_PHY=y CONFIG_AT803X_PHY=y CONFIG_ROCKCHIP_PHY=y CONFIG_DP83867_PHY=y +CONFIG_CAN_AT91=m +CONFIG_CAN_FLEXCAN=m +CONFIG_CAN_SUN4I=y +CONFIG_CAN_XILINXCAN=y +CONFIG_CAN_RCAR=m +CONFIG_CAN_MCP251X=y CONFIG_MDIO_MSCC_MIIM=m CONFIG_USB_PEGASUS=y CONFIG_USB_RTL8152=m @@ -378,8 +377,6 @@ CONFIG_SERIAL_MSM=y CONFIG_SERIAL_MSM_CONSOLE=y CONFIG_SERIAL_VT8500=y CONFIG_SERIAL_VT8500_CONSOLE=y -CONFIG_SERIAL_OMAP=y -CONFIG_SERIAL_OMAP_CONSOLE=y CONFIG_SERIAL_BCM63XX=y CONFIG_SERIAL_BCM63XX_CONSOLE=y CONFIG_SERIAL_XILINX_PS_UART=y @@ -465,7 +462,6 @@ CONFIG_SPI_TEGRA20_SLINK=y CONFIG_SPI_XILINX=y CONFIG_SPI_SPIDEV=y CONFIG_SPMI=y -CONFIG_PTP_1588_CLOCK=y CONFIG_PINCTRL_AS3722=y CONFIG_PINCTRL_MICROCHIP_SGPIO=y CONFIG_PINCTRL_OCELOT=y @@ -716,7 +712,6 @@ CONFIG_ROCKCHIP_DW_MIPI_DSI=y CONFIG_ROCKCHIP_INNO_HDMI=y CONFIG_DRM_ATMEL_HLCDC=m CONFIG_DRM_RCAR_DU=m -CONFIG_DRM_RCAR_LVDS=y CONFIG_DRM_SUN4I=m CONFIG_DRM_MSM=m CONFIG_DRM_FSL_DCU=m @@ -783,7 +778,6 @@ CONFIG_SND_ATMEL_SOC_I2S=m CONFIG_SND_BCM2835_SOC_I2S=m CONFIG_SND_IMX_SOC=m CONFIG_SND_SOC_FSL_ASOC_CARD=m -CONFIG_SND_SOC_FSL_SAI=m CONFIG_SND_PXA_SOC_SSP=m CONFIG_SND_MMP_SOC_SSPA=m CONFIG_SND_PXA910_SOC=m @@ -820,7 +814,7 @@ CONFIG_SND_SOC_TEGRA_TRIMSLICE=m CONFIG_SND_SOC_TEGRA_ALC5632=m CONFIG_SND_SOC_TEGRA_MAX98090=m CONFIG_SND_SOC_DAVINCI_MCASP=m -CONFIG_SND_SOC_AC97=m +CONFIG_SND_SOC_AC97_CODEC=m CONFIG_SND_SOC_AK4642=m CONFIG_SND_SOC_CPCAP=m CONFIG_SND_SOC_CS42L51_I2C=m @@ -875,7 +869,6 @@ CONFIG_USB_GPIO_VBUS=y CONFIG_USB_ISP1301=y CONFIG_USB_MXS_PHY=y CONFIG_USB_GADGET=y -CONFIG_USB_FSL_USB2=y CONFIG_USB_RENESAS_USBHS_UDC=m CONFIG_USB_ASPEED_VHUB=m CONFIG_USB_CONFIGFS=m @@ -1051,7 +1044,6 @@ CONFIG_MSM_MMCC_8960=y CONFIG_MSM_MMCC_8974=y CONFIG_HWSPINLOCK=y CONFIG_HWSPINLOCK_QCOM=y -CONFIG_MICROCHIP_PIT64B=y CONFIG_BCM2835_MBOX=y CONFIG_QCOM_APCS_IPC=y CONFIG_QCOM_IPCC=y @@ -1071,9 +1063,13 @@ CONFIG_ASPEED_LPC_CTRL=m CONFIG_ASPEED_LPC_SNOOP=m CONFIG_ASPEED_P2A_CTRL=m CONFIG_RASPBERRYPI_POWER=y +CONFIG_QCOM_COMMAND_DB=m CONFIG_QCOM_CPR=y CONFIG_QCOM_GSBI=y +CONFIG_QCOM_OCMEM=m CONFIG_QCOM_RMTFS_MEM=m +CONFIG_QCOM_RPMH=y +CONFIG_QCOM_RPMHPD=y CONFIG_QCOM_RPMPD=y CONFIG_QCOM_SMEM=y CONFIG_QCOM_SMD_RPM=y diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig index a53ccd49f8ff..877c5150a987 100644 --- a/arch/arm/configs/mv78xx0_defconfig +++ b/arch/arm/configs/mv78xx0_defconfig @@ -1,5 +1,5 @@ CONFIG_SYSVIPC=y -CONFIG_NO_HZ=y +CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT=y CONFIG_LOG_BUF_SHIFT=14 diff --git a/arch/arm/configs/mvebu_v5_defconfig b/arch/arm/configs/mvebu_v5_defconfig index ef3a33ebc29a..2467afd32146 100644 --- a/arch/arm/configs/mvebu_v5_defconfig +++ b/arch/arm/configs/mvebu_v5_defconfig @@ -1,6 +1,6 @@ CONFIG_SYSVIPC=y CONFIG_FHANDLE=y -CONFIG_NO_HZ=y +CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT=y CONFIG_LOG_BUF_SHIFT=19 @@ -184,13 +184,13 @@ CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_2=y CONFIG_NLS_UTF8=y -CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_DEV_MARVELL_CESA=y CONFIG_CRC_CCITT=y CONFIG_LIBCRC32C=y CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y # CONFIG_SCHED_DEBUG is not set diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index 155553ee06f4..feb38a94c1a7 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -1,5 +1,5 @@ CONFIG_SYSVIPC=y -CONFIG_NO_HZ=y +CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT_VOLUNTARY=y CONFIG_TASKSTATS=y @@ -38,7 +38,6 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_DIAG is not set # CONFIG_IPV6 is not set CONFIG_CAN=m -CONFIG_CAN_FLEXCAN=m # CONFIG_WIRELESS is not set CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y @@ -62,6 +61,7 @@ CONFIG_ICPLUS_PHY=y CONFIG_MICREL_PHY=y CONFIG_REALTEK_PHY=y CONFIG_SMSC_PHY=y +CONFIG_CAN_FLEXCAN=m CONFIG_USB_USBNET=y CONFIG_USB_NET_SMSC95XX=y # CONFIG_WLAN is not set @@ -163,8 +163,8 @@ CONFIG_CRC_ITU_T=m CONFIG_CRC7=m CONFIG_FONTS=y CONFIG_PRINTK_TIME=y -CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_FRAME_WARN=2048 CONFIG_MAGIC_SYSRQ=y CONFIG_SOFTLOCKUP_DETECTOR=y diff --git a/arch/arm/configs/neponset_defconfig b/arch/arm/configs/neponset_defconfig index 907403529e30..c333406ce5e3 100644 --- a/arch/arm/configs/neponset_defconfig +++ b/arch/arm/configs/neponset_defconfig @@ -1,6 +1,8 @@ CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y +CONFIG_ARCH_MULTI_V4=y +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_SA1100=y CONFIG_SA1100_ASSABET=y CONFIG_ASSABET_NEPONSET=y @@ -9,7 +11,6 @@ CONFIG_ZBOOT_ROM_BSS=0xc1000000 CONFIG_ZBOOT_ROM=y CONFIG_CMDLINE="console=ttySA0,38400n8 cpufreq=221200 rw root=/dev/mtdblock2 mtdparts=sa1100:512K(boot),1M(kernel),2560K(initrd),4M(root) load_ramdisk=1 prompt_ramdisk=0 mem=32M noinitrd initrd=0xc0800000,3M" CONFIG_FPE_NWFPE=y -CONFIG_BINFMT_AOUT=y CONFIG_PM=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y diff --git a/arch/arm/configs/netwinder_defconfig b/arch/arm/configs/netwinder_defconfig index cf7bbcf9d98a..30ff6fbce5a3 100644 --- a/arch/arm/configs/netwinder_defconfig +++ b/arch/arm/configs/netwinder_defconfig @@ -1,11 +1,12 @@ CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 +CONFIG_ARCH_MULTI_V4=y +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_FOOTBRIDGE=y CONFIG_ARCH_NETWINDER=y CONFIG_DEPRECATED_PARAM_STRUCT=y CONFIG_CMDLINE="root=0x801" CONFIG_FPE_NWFPE=y -CONFIG_BINFMT_AOUT=y CONFIG_PARTITION_ADVANCED=y CONFIG_NET=y CONFIG_PACKET=y diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig index 54a9f50122af..70511fe4b3ec 100644 --- a/arch/arm/configs/omap1_defconfig +++ b/arch/arm/configs/omap1_defconfig @@ -1,6 +1,6 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y -CONFIG_NO_HZ=y +CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT=y CONFIG_BSD_PROCESS_ACCT=y @@ -218,7 +218,6 @@ CONFIG_NLS_KOI8_R=y CONFIG_NLS_UTF8=y # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_SECURITY=y CONFIG_CRYPTO_ECB=y CONFIG_CRYPTO_PCBC=y @@ -232,6 +231,7 @@ CONFIG_FONT_8x16=y CONFIG_FONT_6x11=y CONFIG_FONT_MINI_4x6=y # CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 99d015cf8919..965853c1c530 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -2,7 +2,7 @@ CONFIG_KERNEL_LZMA=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_AUDIT=y -CONFIG_NO_HZ=y +CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_IKCONFIG=y @@ -249,8 +249,6 @@ CONFIG_NET_ACT_POLICE=m CONFIG_NET_ACT_GACT=m CONFIG_NET_SWITCHDEV=y CONFIG_CAN=m -CONFIG_CAN_C_CAN=m -CONFIG_CAN_C_CAN_PLATFORM=m CONFIG_BT=m CONFIG_BT_RFCOMM=m CONFIG_BT_RFCOMM_TTY=y @@ -350,6 +348,8 @@ CONFIG_AT803X_PHY=y CONFIG_SMSC_PHY=y CONFIG_DP83848_PHY=y CONFIG_DP83867_PHY=y +CONFIG_CAN_C_CAN=m +CONFIG_CAN_C_CAN_PLATFORM=m CONFIG_PPP=m CONFIG_PPP_BSDCOMP=m CONFIG_PPP_DEFLATE=m @@ -419,8 +419,6 @@ CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y CONFIG_SERIAL_8250_OMAP=y CONFIG_SERIAL_OF_PLATFORM=y -CONFIG_SERIAL_OMAP=y -CONFIG_SERIAL_OMAP_CONSOLE=y CONFIG_SERIAL_DEV_BUS=y CONFIG_I2C_CHARDEV=y CONFIG_SPI=y @@ -430,7 +428,6 @@ CONFIG_SPI_TI_QSPI=m CONFIG_HSI=m CONFIG_OMAP_SSI=m CONFIG_SSI_PROTOCOL=m -CONFIG_PTP_1588_CLOCK=y CONFIG_PINCTRL_SINGLE=y CONFIG_DEBUG_GPIO=y CONFIG_GPIO_SYSFS=y diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig index 1311d9583fcc..0629b088a584 100644 --- a/arch/arm/configs/orion5x_defconfig +++ b/arch/arm/configs/orion5x_defconfig @@ -1,5 +1,5 @@ CONFIG_SYSVIPC=y -CONFIG_NO_HZ=y +CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT=y CONFIG_LOG_BUF_SHIFT=14 @@ -138,9 +138,9 @@ CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_DEV_MARVELL_CESA=y CONFIG_CRC_T10DIF=y # CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y -CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y # CONFIG_SLUB_DEBUG is not set CONFIG_LATENCYTOP=y # CONFIG_FTRACE is not set diff --git a/arch/arm/configs/oxnas_v6_defconfig b/arch/arm/configs/oxnas_v6_defconfig index 600f78b363dd..d206c4f04490 100644 --- a/arch/arm/configs/oxnas_v6_defconfig +++ b/arch/arm/configs/oxnas_v6_defconfig @@ -1,5 +1,5 @@ CONFIG_SYSVIPC=y -CONFIG_NO_HZ=y +CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_CGROUPS=y CONFIG_BLK_DEV_INITRD=y diff --git a/arch/arm/configs/pcm027_defconfig b/arch/arm/configs/pcm027_defconfig index 06bc9a8fef90..a392312a13ce 100644 --- a/arch/arm/configs/pcm027_defconfig +++ b/arch/arm/configs/pcm027_defconfig @@ -1,6 +1,6 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y -CONFIG_NO_HZ=y +CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT=y CONFIG_BSD_PROCESS_ACCT=y diff --git a/arch/arm/configs/pleb_defconfig b/arch/arm/configs/pleb_defconfig index d87263336cb2..fd2667873273 100644 --- a/arch/arm/configs/pleb_defconfig +++ b/arch/arm/configs/pleb_defconfig @@ -4,6 +4,8 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y # CONFIG_HOTPLUG is not set # CONFIG_SHMEM is not set +CONFIG_ARCH_MULTI_V4=y +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_SA1100=y CONFIG_SA1100_PLEB=y CONFIG_UNUSED_BOARD_FILES=y diff --git a/arch/arm/configs/pxa168_defconfig b/arch/arm/configs/pxa168_defconfig index 70d327895ccf..826ebbef2e3c 100644 --- a/arch/arm/configs/pxa168_defconfig +++ b/arch/arm/configs/pxa168_defconfig @@ -4,7 +4,7 @@ CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_MACH_ASPENITE=y CONFIG_MACH_ZYLONITE2=y CONFIG_MACH_AVENGERS_LITE=y -CONFIG_NO_HZ=y +CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT=y CONFIG_AEABI=y @@ -50,9 +50,9 @@ CONFIG_ROOT_NFS=y CONFIG_CRC_CCITT=y CONFIG_PRINTK_TIME=y CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_MAGIC_SYSRQ=y # CONFIG_DEBUG_PREEMPT is not set -CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_LL=y # CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/arm/configs/pxa910_defconfig b/arch/arm/configs/pxa910_defconfig index 5072bde71508..353008de5678 100644 --- a/arch/arm/configs/pxa910_defconfig +++ b/arch/arm/configs/pxa910_defconfig @@ -1,5 +1,5 @@ CONFIG_SYSVIPC=y -CONFIG_NO_HZ=y +CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT=y CONFIG_LOG_BUF_SHIFT=14 @@ -58,9 +58,9 @@ CONFIG_ROOT_NFS=y CONFIG_CRC_CCITT=y CONFIG_PRINTK_TIME=y CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_MAGIC_SYSRQ=y # CONFIG_DEBUG_PREEMPT is not set -CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_LL=y CONFIG_DEBUG_MMP_UART2=y diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig index 104a45722799..ca6d0049362b 100644 --- a/arch/arm/configs/pxa_defconfig +++ b/arch/arm/configs/pxa_defconfig @@ -1,7 +1,7 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_FHANDLE=y -CONFIG_NO_HZ=y +CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT=y CONFIG_BSD_PROCESS_ACCT=y @@ -646,7 +646,6 @@ CONFIG_NLS_ASCII=m CONFIG_NLS_ISO8859_1=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_UTF8=m -CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_TIMER_STATS=y CONFIG_SECURITY=y CONFIG_CRYPTO_MANAGER=y @@ -682,6 +681,7 @@ CONFIG_FONT_6x11=y CONFIG_FONT_MINI_4x6=y CONFIG_PRINTK_TIME=y CONFIG_DYNAMIC_DEBUG=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_FRAME_WARN=0 CONFIG_STRIP_ASM_SYMS=y CONFIG_MAGIC_SYSRQ=y diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig index fb8c03bd80d7..7d8b6884fd00 100644 --- a/arch/arm/configs/qcom_defconfig +++ b/arch/arm/configs/qcom_defconfig @@ -1,5 +1,5 @@ CONFIG_SYSVIPC=y -CONFIG_NO_HZ=y +CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT=y CONFIG_IKCONFIG=y @@ -245,6 +245,7 @@ CONFIG_QCOM_Q6V5_PAS=y CONFIG_QCOM_Q6V5_PIL=y CONFIG_QCOM_WCNSS_PIL=y CONFIG_RPMSG_CHAR=y +CONFIG_RPMSG_CTRL=y CONFIG_RPMSG_QCOM_GLINK_SMEM=y CONFIG_RPMSG_QCOM_SMD=y CONFIG_QCOM_COMMAND_DB=y @@ -253,10 +254,14 @@ CONFIG_QCOM_OCMEM=y CONFIG_QCOM_PM=y CONFIG_QCOM_RPMH=y CONFIG_QCOM_RPMHPD=y +CONFIG_QCOM_RMTFS_MEM=y +CONFIG_QCOM_RPMPD=y CONFIG_QCOM_SMEM=y CONFIG_QCOM_SMD_RPM=y CONFIG_QCOM_SMP2P=y CONFIG_QCOM_SMSM=y +CONFIG_QCOM_SOCINFO=y +CONFIG_QCOM_STATS=y CONFIG_QCOM_WCNSS_CTRL=y CONFIG_EXTCON_QCOM_SPMI_MISC=y CONFIG_IIO=y diff --git a/arch/arm/configs/rpc_defconfig b/arch/arm/configs/rpc_defconfig index 16d74a1f027a..210974364d61 100644 --- a/arch/arm/configs/rpc_defconfig +++ b/arch/arm/configs/rpc_defconfig @@ -4,10 +4,11 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y +CONFIG_ARCH_MULTI_V4=y +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_RPC=y CONFIG_CPU_SA110=y CONFIG_FPE_NWFPE=y -CONFIG_BINFMT_AOUT=y CONFIG_PARTITION_ADVANCED=y CONFIG_BSD_DISKLABEL=y CONFIG_SLAB=y diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig index 4f04f583c738..93258d5b57ff 100644 --- a/arch/arm/configs/s3c6400_defconfig +++ b/arch/arm/configs/s3c6400_defconfig @@ -62,8 +62,8 @@ CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_CRAMFS=y CONFIG_ROMFS_FS=y -CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_RT_MUTEXES=y CONFIG_DEBUG_SPINLOCK=y diff --git a/arch/arm/configs/s5pv210_defconfig b/arch/arm/configs/s5pv210_defconfig index 789e900a8a08..4c1e480b5bbd 100644 --- a/arch/arm/configs/s5pv210_defconfig +++ b/arch/arm/configs/s5pv210_defconfig @@ -1,5 +1,5 @@ CONFIG_SYSVIPC=y -CONFIG_NO_HZ=y +CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT=y CONFIG_CGROUPS=y @@ -115,8 +115,8 @@ CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_UTF8=y CONFIG_CRC_CCITT=y -CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_MAGIC_SYSRQ=y # CONFIG_DEBUG_PREEMPT is not set CONFIG_DEBUG_RT_MUTEXES=y diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig index 3a6a4851ef26..877bbe7b777e 100644 --- a/arch/arm/configs/sama5_defconfig +++ b/arch/arm/configs/sama5_defconfig @@ -43,9 +43,6 @@ CONFIG_BRIDGE_VLAN_FILTERING=y CONFIG_NET_DSA=m CONFIG_VLAN_8021Q=m CONFIG_CAN=y -CONFIG_CAN_AT91=y -CONFIG_CAN_M_CAN=y -CONFIG_CAN_M_CAN_PLATFORM=y CONFIG_CFG80211=y CONFIG_MAC80211=y CONFIG_MAC80211_LEDS=y @@ -90,6 +87,9 @@ CONFIG_MACB=y # CONFIG_NET_VENDOR_STMICRO is not set # CONFIG_NET_VENDOR_WIZNET is not set CONFIG_MICREL_PHY=y +CONFIG_CAN_AT91=y +CONFIG_CAN_M_CAN=y +CONFIG_CAN_M_CAN_PLATFORM=y CONFIG_USB_LAN78XX=m CONFIG_LIBERTAS_THINFIRM=m CONFIG_LIBERTAS_THINFIRM_USB=m diff --git a/arch/arm/configs/sama7_defconfig b/arch/arm/configs/sama7_defconfig index 0384030d8b25..72af50d9e48a 100644 --- a/arch/arm/configs/sama7_defconfig +++ b/arch/arm/configs/sama7_defconfig @@ -59,8 +59,6 @@ CONFIG_BRIDGE_VLAN_FILTERING=y CONFIG_NET_DSA=m CONFIG_VLAN_8021Q=m CONFIG_CAN=y -CONFIG_CAN_M_CAN=y -CONFIG_CAN_M_CAN_PLATFORM=y CONFIG_BT=y CONFIG_BT_RFCOMM=y CONFIG_BT_RFCOMM_TTY=y @@ -107,6 +105,8 @@ CONFIG_BLK_DEV_SD=y CONFIG_NETDEVICES=y CONFIG_MACB=y CONFIG_MICREL_PHY=y +CONFIG_CAN_M_CAN=y +CONFIG_CAN_M_CAN_PLATFORM=y CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set @@ -188,7 +188,6 @@ CONFIG_RTC_DRV_AT91SAM9=y CONFIG_DMADEVICES=y CONFIG_AT_XDMAC=y CONFIG_STAGING=y -CONFIG_MICROCHIP_PIT64B=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_IIO=y CONFIG_IIO_SW_TRIGGER=y diff --git a/arch/arm/configs/shannon_defconfig b/arch/arm/configs/shannon_defconfig index 42252e85ee49..dfcea70b8034 100644 --- a/arch/arm/configs/shannon_defconfig +++ b/arch/arm/configs/shannon_defconfig @@ -1,6 +1,8 @@ CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y +CONFIG_ARCH_MULTI_V4=y +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_SA1100=y CONFIG_SA1100_SHANNON=y CONFIG_UNUSED_BOARD_FILES=y diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig index a29bebb3742e..452aef74cc5c 100644 --- a/arch/arm/configs/shmobile_defconfig +++ b/arch/arm/configs/shmobile_defconfig @@ -1,5 +1,5 @@ CONFIG_SYSVIPC=y -CONFIG_NO_HZ=y +CONFIG_NO_HZ_IDLE=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_CGROUPS=y @@ -32,8 +32,8 @@ CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y +CONFIG_NET_DSA=y CONFIG_CAN=y -CONFIG_CAN_RCAR=y CONFIG_PCI=y CONFIG_PCI_MSI=y CONFIG_PCI_RCAR_GEN2=y @@ -52,11 +52,14 @@ CONFIG_BLK_DEV_SD=y CONFIG_ATA=y CONFIG_SATA_RCAR=y CONFIG_NETDEVICES=y +CONFIG_NET_DSA_RZN1_A5PSW=y CONFIG_SH_ETH=y CONFIG_RAVB=y CONFIG_SMSC911X=y +CONFIG_STMMAC_ETH=y CONFIG_MICREL_PHY=y CONFIG_SMSC_PHY=y +CONFIG_CAN_RCAR=y CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set @@ -91,6 +94,7 @@ CONFIG_SPI_SH_MSIOF=y CONFIG_SPI_SH_HSPI=y CONFIG_PINCTRL_RZA1=y CONFIG_PINCTRL_RZA2=y +CONFIG_PINCTRL_RZN1=y CONFIG_GPIO_EM=y CONFIG_GPIO_RCAR=y CONFIG_GPIO_PCA953X=y @@ -180,6 +184,8 @@ CONFIG_RTC_DRV_DA9063=y CONFIG_RTC_DRV_SH=y CONFIG_RTC_DRV_RZN1=y CONFIG_DMADEVICES=y +CONFIG_DW_DMAC=y +CONFIG_RZN1_DMAMUX=y CONFIG_RCAR_DMAC=y CONFIG_RENESAS_USB_DMAC=y CONFIG_STAGING=y diff --git a/arch/arm/configs/simpad_defconfig b/arch/arm/configs/simpad_defconfig index cc451728f6d9..4e00a4c2c287 100644 --- a/arch/arm/configs/simpad_defconfig +++ b/arch/arm/configs/simpad_defconfig @@ -5,6 +5,8 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_EXPERT=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_ARCH_MULTI_V4=y +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_SA1100=y CONFIG_SA1100_SIMPAD=y CONFIG_UNUSED_BOARD_FILES=y diff --git a/arch/arm/configs/socfpga_defconfig b/arch/arm/configs/socfpga_defconfig index d91ae3f0d698..70739e09d0f4 100644 --- a/arch/arm/configs/socfpga_defconfig +++ b/arch/arm/configs/socfpga_defconfig @@ -33,9 +33,6 @@ CONFIG_NETWORK_PHY_TIMESTAMPING=y CONFIG_VLAN_8021Q=y CONFIG_VLAN_8021Q_GVRP=y CONFIG_CAN=y -CONFIG_CAN_C_CAN=y -CONFIG_CAN_C_CAN_PLATFORM=y -CONFIG_CAN_DEBUG_DEVICES=y CONFIG_PCI=y CONFIG_PCI_MSI=y CONFIG_PCIE_ALTERA=y @@ -70,6 +67,9 @@ CONFIG_IXGBE=m CONFIG_STMMAC_ETH=y CONFIG_MARVELL_PHY=y CONFIG_MICREL_PHY=y +CONFIG_CAN_C_CAN=y +CONFIG_CAN_C_CAN_PLATFORM=y +CONFIG_CAN_DEBUG_DEVICES=y CONFIG_INPUT_EVDEV=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_STMPE=y diff --git a/arch/arm/configs/sp7021_defconfig b/arch/arm/configs/sp7021_defconfig index 703b9aaa40f0..aa7dfd670db5 100644 --- a/arch/arm/configs/sp7021_defconfig +++ b/arch/arm/configs/sp7021_defconfig @@ -13,7 +13,6 @@ CONFIG_LOG_BUF_SHIFT=14 # CONFIG_RD_LZ4 is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_PERF_EVENTS=y -CONFIG_SLAB=y CONFIG_ARCH_SUNPLUS=y # CONFIG_VDSO is not set CONFIG_SMP=y @@ -25,6 +24,7 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_SLAB=y CONFIG_UEVENT_HELPER=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y diff --git a/arch/arm/configs/spear13xx_defconfig b/arch/arm/configs/spear13xx_defconfig index 0227dd566c28..bfde0c86cdc5 100644 --- a/arch/arm/configs/spear13xx_defconfig +++ b/arch/arm/configs/spear13xx_defconfig @@ -98,7 +98,7 @@ CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ASCII=m CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y CONFIG_DEBUG_SPINLOCK=y -CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y diff --git a/arch/arm/configs/spear3xx_defconfig b/arch/arm/configs/spear3xx_defconfig index 254d970a4011..a96ed5cf778e 100644 --- a/arch/arm/configs/spear3xx_defconfig +++ b/arch/arm/configs/spear3xx_defconfig @@ -78,7 +78,7 @@ CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ASCII=m CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y CONFIG_DEBUG_SPINLOCK=y -CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y diff --git a/arch/arm/configs/spear6xx_defconfig b/arch/arm/configs/spear6xx_defconfig index 2809c4eb77e7..3d631b1f3cfa 100644 --- a/arch/arm/configs/spear6xx_defconfig +++ b/arch/arm/configs/spear6xx_defconfig @@ -67,7 +67,7 @@ CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ASCII=m CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y CONFIG_DEBUG_SPINLOCK=y -CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig index 1284a1d92ca3..66d74653f3fb 100644 --- a/arch/arm/configs/spitz_defconfig +++ b/arch/arm/configs/spitz_defconfig @@ -13,7 +13,6 @@ CONFIG_MACH_AKITA=y CONFIG_MACH_BORZOI=y CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 debug" CONFIG_FPE_NWFPE=y -CONFIG_BINFMT_AOUT=m CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y diff --git a/arch/arm/configs/stm32_defconfig b/arch/arm/configs/stm32_defconfig index 1f5446cda8b6..dc1a32f50b7e 100644 --- a/arch/arm/configs/stm32_defconfig +++ b/arch/arm/configs/stm32_defconfig @@ -74,9 +74,9 @@ CONFIG_NLS=y CONFIG_CRC_ITU_T=y CONFIG_CRC7=y CONFIG_PRINTK_TIME=y -CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y # CONFIG_ENABLE_MUST_CHECK is not set # CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_MAGIC_SYSRQ=y # CONFIG_SLUB_DEBUG is not set # CONFIG_SCHED_DEBUG is not set diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig index 3d14827e0a31..bddc82f78942 100644 --- a/arch/arm/configs/sunxi_defconfig +++ b/arch/arm/configs/sunxi_defconfig @@ -1,4 +1,4 @@ -CONFIG_NO_HZ=y +CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_CGROUPS=y CONFIG_BLK_DEV_INITRD=y @@ -26,7 +26,6 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_DIAG is not set # CONFIG_IPV6 is not set CONFIG_CAN=y -CONFIG_CAN_SUN4I=y # CONFIG_WIRELESS is not set CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y @@ -52,6 +51,7 @@ CONFIG_STMMAC_ETH=y # CONFIG_NET_VENDOR_WIZNET is not set CONFIG_MICREL_PHY=y CONFIG_REALTEK_PHY=y +CONFIG_CAN_SUN4I=y # CONFIG_WLAN is not set CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_SUN4I_LRADC=y diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index 71400af6cef4..f32047e24b63 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -1,5 +1,5 @@ CONFIG_SYSVIPC=y -CONFIG_NO_HZ=y +CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT=y CONFIG_IKCONFIG=y @@ -54,7 +54,6 @@ CONFIG_IPV6_MIP6=y CONFIG_IPV6_TUNNEL=y CONFIG_IPV6_MULTIPLE_TABLES=y CONFIG_CAN=y -CONFIG_CAN_MCP251X=y CONFIG_BT=y CONFIG_BT_RFCOMM=y CONFIG_BT_BNEP=y @@ -99,6 +98,7 @@ CONFIG_NETDEVICES=y CONFIG_DUMMY=y CONFIG_IGB=y CONFIG_R8169=y +CONFIG_CAN_MCP251X=y CONFIG_USB_PEGASUS=y CONFIG_USB_USBNET=y CONFIG_USB_NET_SMSC75XX=y diff --git a/arch/arm/configs/vexpress_defconfig b/arch/arm/configs/vexpress_defconfig index 4e3a0133e4d3..ac3fd7523698 100644 --- a/arch/arm/configs/vexpress_defconfig +++ b/arch/arm/configs/vexpress_defconfig @@ -133,8 +133,8 @@ CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y # CONFIG_CRYPTO_HW is not set CONFIG_DMA_CMA=y -CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_MAGIC_SYSRQ=y CONFIG_DETECT_HUNG_TASK=y # CONFIG_SCHED_DEBUG is not set diff --git a/arch/arm/configs/vt8500_v6_v7_defconfig b/arch/arm/configs/vt8500_v6_v7_defconfig index cb8d38e9562a..41607a84abc8 100644 --- a/arch/arm/configs/vt8500_v6_v7_defconfig +++ b/arch/arm/configs/vt8500_v6_v7_defconfig @@ -1,4 +1,4 @@ -CONFIG_NO_HZ=y +CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_BLK_DEV_INITRD=y CONFIG_ARCH_MULTI_V6=y diff --git a/arch/arm/configs/xcep_defconfig b/arch/arm/configs/xcep_defconfig index 0453948d52ef..ea59e4b6bfc5 100644 --- a/arch/arm/configs/xcep_defconfig +++ b/arch/arm/configs/xcep_defconfig @@ -1,7 +1,7 @@ CONFIG_LOCALVERSION=".xcep-itech" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SYSVIPC=y -CONFIG_NO_HZ=y +CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_IKCONFIG=y diff --git a/arch/arm/include/asm/dma-direct.h b/arch/arm/include/asm/dma-direct.h deleted file mode 100644 index 4f7bcde03abb..000000000000 --- a/arch/arm/include/asm/dma-direct.h +++ /dev/null @@ -1 +0,0 @@ -#include <mach/dma-direct.h> diff --git a/arch/arm/include/asm/dma.h b/arch/arm/include/asm/dma.h index 05f29a72150b..c6aded1b069c 100644 --- a/arch/arm/include/asm/dma.h +++ b/arch/arm/include/asm/dma.h @@ -106,7 +106,7 @@ extern void set_dma_sg(unsigned int chan, struct scatterlist *sg, int nr_sg); */ extern void __set_dma_addr(unsigned int chan, void *addr); #define set_dma_addr(chan, addr) \ - __set_dma_addr(chan, (void *)__bus_to_virt(addr)) + __set_dma_addr(chan, (void *)isa_bus_to_virt(addr)) /* Set the DMA byte count for this channel * diff --git a/arch/arm/include/asm/fpstate.h b/arch/arm/include/asm/fpstate.h index ca42fd9ae0b3..e29d9c7a5238 100644 --- a/arch/arm/include/asm/fpstate.h +++ b/arch/arm/include/asm/fpstate.h @@ -46,9 +46,6 @@ union vfp_state { struct vfp_hard_struct hard; }; -extern void vfp_flush_thread(union vfp_state *); -extern void vfp_release_thread(union vfp_state *); - #define FP_HARD_SIZE 35 struct fp_hard_struct { diff --git a/arch/arm/include/asm/hardware/dec21285.h b/arch/arm/include/asm/hardware/dec21285.h index 3f18a56a025d..894f2a635cbb 100644 --- a/arch/arm/include/asm/hardware/dec21285.h +++ b/arch/arm/include/asm/hardware/dec21285.h @@ -22,6 +22,13 @@ #define DC21285_IO(x) (x) #endif +/* + * The footbridge is programmed to expose the system RAM at 0xe0000000. + * The requirement is that the RAM isn't placed at bus address 0, which + * would clash with VGA cards. + */ +#define BUS_OFFSET 0xe0000000 + #define CSR_PCICMD DC21285_IO(0x0004) #define CSR_CLASSREV DC21285_IO(0x0008) #define CSR_PCICACHELINESIZE DC21285_IO(0x000c) @@ -81,19 +88,6 @@ #define SA110_CNTL_XCSDIR(x) ((x)<<28) #define SA110_CNTL_PCICFN (1 << 31) -/* - * footbridge_cfn_mode() is used when we want - * to check whether we are the central function - */ -#define __footbridge_cfn_mode() (*CSR_SA110_CNTL & SA110_CNTL_PCICFN) -#if defined(CONFIG_FOOTBRIDGE_HOST) && defined(CONFIG_FOOTBRIDGE_ADDIN) -#define footbridge_cfn_mode() __footbridge_cfn_mode() -#elif defined(CONFIG_FOOTBRIDGE_HOST) -#define footbridge_cfn_mode() (1) -#else -#define footbridge_cfn_mode() (0) -#endif - #define CSR_PCIADDR_EXTN DC21285_IO(0x0140) #define CSR_PREFETCHMEMRANGE DC21285_IO(0x0144) #define CSR_XBUS_CYCLE DC21285_IO(0x0148) diff --git a/arch/arm/include/asm/mach/dma.h b/arch/arm/include/asm/mach/dma.h index 1506422af383..5ec11d7f0d04 100644 --- a/arch/arm/include/asm/mach/dma.h +++ b/arch/arm/include/asm/mach/dma.h @@ -44,8 +44,3 @@ struct dma_struct { * isa_dma_add - add an ISA-style DMA channel */ extern int isa_dma_add(unsigned int, dma_t *dma); - -/* - * Add the ISA DMA controller. Always takes channels 0-7. - */ -extern void isa_init_dma(void); diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index a55a9038abc8..d8eef4bd8c71 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -370,17 +370,6 @@ static inline unsigned long __virt_to_idmap(unsigned long x) #define virt_to_idmap(x) __virt_to_idmap((unsigned long)(x)) /* - * Virtual <-> DMA view memory address translations - * Again, these are *only* valid on the kernel direct mapped RAM - * memory. Use of these is *deprecated* (and that doesn't mean - * use the __ prefixed forms instead.) See dma-mapping.h. - */ -#ifndef __virt_to_bus -#define __virt_to_bus __virt_to_phys -#define __bus_to_virt __phys_to_virt -#endif - -/* * Conversion between a struct page and a physical address. * * page_to_pfn(page) convert a struct page * to a PFN number diff --git a/arch/arm/include/asm/stacktrace.h b/arch/arm/include/asm/stacktrace.h index 3e78f921b8b2..36b2ff44fcbb 100644 --- a/arch/arm/include/asm/stacktrace.h +++ b/arch/arm/include/asm/stacktrace.h @@ -21,6 +21,9 @@ struct stackframe { struct llist_node *kr_cur; struct task_struct *tsk; #endif +#ifdef CONFIG_UNWINDER_FRAME_POINTER + bool ex_frame; +#endif }; static __always_inline @@ -34,6 +37,9 @@ void arm_get_current_stackframe(struct pt_regs *regs, struct stackframe *frame) frame->kr_cur = NULL; frame->tsk = current; #endif +#ifdef CONFIG_UNWINDER_FRAME_POINTER + frame->ex_frame = in_entry_text(frame->pc); +#endif } extern int unwind_frame(struct stackframe *frame); @@ -41,5 +47,7 @@ extern void walk_stackframe(struct stackframe *frame, int (*fn)(struct stackframe *, void *), void *data); extern void dump_mem(const char *lvl, const char *str, unsigned long bottom, unsigned long top); +extern void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk, + const char *loglvl); #endif /* __ASM_STACKTRACE_H */ diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 553866751e1a..95034d32213c 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -45,7 +45,6 @@ obj-$(CONFIG_ISA_DMA_API) += dma.o obj-$(CONFIG_FIQ) += fiq.o fiqasm.o obj-$(CONFIG_MODULES) += armksyms.o module.o obj-$(CONFIG_ARM_MODULE_PLTS) += module-plts.o -obj-$(CONFIG_ISA_DMA) += dma-isa.o obj-$(CONFIG_PCI) += bios32.o isa.o obj-$(CONFIG_ARM_CPU_SUSPEND) += sleep.o suspend.o obj-$(CONFIG_HIBERNATION) += hibernate.o diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c index 02839d8b6202..264827281113 100644 --- a/arch/arm/kernel/devtree.c +++ b/arch/arm/kernel/devtree.c @@ -194,14 +194,12 @@ const struct machine_desc * __init setup_machine_fdt(void *dt_virt) { const struct machine_desc *mdesc, *mdesc_best = NULL; -#if defined(CONFIG_ARCH_MULTIPLATFORM) || defined(CONFIG_ARM_SINGLE_ARMV7M) DT_MACHINE_START(GENERIC_DT, "Generic DT based system") .l2c_aux_val = 0x0, .l2c_aux_mask = ~0x0, MACHINE_END mdesc_best = &__mach_desc_GENERIC_DT; -#endif if (!dt_virt || !early_init_dt_verify(dt_virt)) return NULL; diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 034cb48c9eeb..fe28fc1f759d 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -70,7 +70,7 @@ static void __init init_irq_stacks(void) } } -#ifndef CONFIG_PREEMPT_RT +#ifdef CONFIG_SOFTIRQ_ON_OWN_STACK static void ____do_softirq(void *arg) { __do_softirq(); diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 3d9cace63884..96f3fbd51764 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -201,7 +201,7 @@ void __show_regs(struct pt_regs *regs) void show_regs(struct pt_regs * regs) { __show_regs(regs); - dump_stack(); + dump_backtrace(regs, NULL, KERN_DEFAULT); } ATOMIC_NOTIFIER_HEAD(thread_notify_head); diff --git a/arch/arm/kernel/return_address.c b/arch/arm/kernel/return_address.c index 8aac1e10b117..38f1ea9c724d 100644 --- a/arch/arm/kernel/return_address.c +++ b/arch/arm/kernel/return_address.c @@ -47,6 +47,7 @@ here: frame.kr_cur = NULL; frame.tsk = current; #endif + frame.ex_frame = false; walk_stackframe(&frame, save_return_addr, &data); diff --git a/arch/arm/kernel/stacktrace.c b/arch/arm/kernel/stacktrace.c index d0fa2037460a..85443b5d1922 100644 --- a/arch/arm/kernel/stacktrace.c +++ b/arch/arm/kernel/stacktrace.c @@ -9,6 +9,8 @@ #include <asm/stacktrace.h> #include <asm/traps.h> +#include "reboot.h" + #if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND) /* * Unwind the current stack frame and store the new register values in the @@ -39,29 +41,74 @@ * Note that with framepointer enabled, even the leaf functions have the same * prologue and epilogue, therefore we can ignore the LR value in this case. */ -int notrace unwind_frame(struct stackframe *frame) + +extern unsigned long call_with_stack_end; + +static int frame_pointer_check(struct stackframe *frame) { unsigned long high, low; unsigned long fp = frame->fp; + unsigned long pc = frame->pc; + + /* + * call_with_stack() is the only place we allow SP to jump from one + * stack to another, with FP and SP pointing to different stacks, + * skipping the FP boundary check at this point. + */ + if (pc >= (unsigned long)&call_with_stack && + pc < (unsigned long)&call_with_stack_end) + return 0; /* only go to a higher address on the stack */ low = frame->sp; high = ALIGN(low, THREAD_SIZE); -#ifdef CONFIG_CC_IS_CLANG /* check current frame pointer is within bounds */ +#ifdef CONFIG_CC_IS_CLANG if (fp < low + 4 || fp > high - 4) return -EINVAL; - - frame->sp = frame->fp; - frame->fp = READ_ONCE_NOCHECK(*(unsigned long *)(fp)); - frame->pc = READ_ONCE_NOCHECK(*(unsigned long *)(fp + 4)); #else - /* check current frame pointer is within bounds */ if (fp < low + 12 || fp > high - 4) return -EINVAL; +#endif + + return 0; +} + +int notrace unwind_frame(struct stackframe *frame) +{ + unsigned long fp = frame->fp; + + if (frame_pointer_check(frame)) + return -EINVAL; + + /* + * When we unwind through an exception stack, include the saved PC + * value into the stack trace. + */ + if (frame->ex_frame) { + struct pt_regs *regs = (struct pt_regs *)frame->sp; + + /* + * We check that 'regs + sizeof(struct pt_regs)' (that is, + * ®s[1]) does not exceed the bottom of the stack to avoid + * accessing data outside the task's stack. This may happen + * when frame->ex_frame is a false positive. + */ + if ((unsigned long)®s[1] > ALIGN(frame->sp, THREAD_SIZE)) + return -EINVAL; + + frame->pc = regs->ARM_pc; + frame->ex_frame = false; + return 0; + } /* restore the registers from the stack frame */ +#ifdef CONFIG_CC_IS_CLANG + frame->sp = frame->fp; + frame->fp = READ_ONCE_NOCHECK(*(unsigned long *)(fp)); + frame->pc = READ_ONCE_NOCHECK(*(unsigned long *)(fp + 4)); +#else frame->fp = READ_ONCE_NOCHECK(*(unsigned long *)(fp - 12)); frame->sp = READ_ONCE_NOCHECK(*(unsigned long *)(fp - 8)); frame->pc = READ_ONCE_NOCHECK(*(unsigned long *)(fp - 4)); @@ -72,6 +119,9 @@ int notrace unwind_frame(struct stackframe *frame) (void *)frame->fp, &frame->kr_cur); #endif + if (in_entry_text(frame->pc)) + frame->ex_frame = true; + return 0; } #endif @@ -102,7 +152,6 @@ static int save_trace(struct stackframe *frame, void *d) { struct stack_trace_data *data = d; struct stack_trace *trace = data->trace; - struct pt_regs *regs; unsigned long addr = frame->pc; if (data->no_sched_functions && in_sched_functions(addr)) @@ -113,19 +162,6 @@ static int save_trace(struct stackframe *frame, void *d) } trace->entries[trace->nr_entries++] = addr; - - if (trace->nr_entries >= trace->max_entries) - return 1; - - if (!in_entry_text(frame->pc)) - return 0; - - regs = (struct pt_regs *)frame->sp; - if ((unsigned long)®s[1] > ALIGN(frame->sp, THREAD_SIZE)) - return 0; - - trace->entries[trace->nr_entries++] = regs->ARM_pc; - return trace->nr_entries >= trace->max_entries; } @@ -167,6 +203,9 @@ here: frame.kr_cur = NULL; frame.tsk = tsk; #endif +#ifdef CONFIG_UNWINDER_FRAME_POINTER + frame.ex_frame = false; +#endif walk_stackframe(&frame, save_trace, &data); } @@ -188,6 +227,9 @@ void save_stack_trace_regs(struct pt_regs *regs, struct stack_trace *trace) frame.kr_cur = NULL; frame.tsk = current; #endif +#ifdef CONFIG_UNWINDER_FRAME_POINTER + frame.ex_frame = in_entry_text(frame.pc); +#endif walk_stackframe(&frame, save_trace, &data); } diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 9283dc65be31..20b2db6dcd1c 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -205,14 +205,14 @@ static void dump_instr(const char *lvl, struct pt_regs *regs) } #ifdef CONFIG_ARM_UNWIND -static inline void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk, - const char *loglvl) +void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk, + const char *loglvl) { unwind_backtrace(regs, tsk, loglvl); } #else -static void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk, - const char *loglvl) +void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk, + const char *loglvl) { unsigned int fp, mode; int ok = 1; @@ -487,7 +487,7 @@ asmlinkage void do_undefinstr(struct pt_regs *regs) die_sig: #ifdef CONFIG_DEBUG_USER if (user_debug & UDBG_UNDEFINED) { - pr_info("%s (%d): undefined instruction: pc=%p\n", + pr_info("%s (%d): undefined instruction: pc=%px\n", current->comm, task_pid_nr(current), pc); __show_regs(regs); dump_instr(KERN_INFO, regs); @@ -920,9 +920,9 @@ asmlinkage void handle_bad_stack(struct pt_regs *regs) { unsigned long tsk_stk = (unsigned long)current->stack; #ifdef CONFIG_IRQSTACKS - unsigned long irq_stk = (unsigned long)this_cpu_read(irq_stack_ptr); + unsigned long irq_stk = (unsigned long)raw_cpu_read(irq_stack_ptr); #endif - unsigned long ovf_stk = (unsigned long)this_cpu_read(overflow_stack_ptr); + unsigned long ovf_stk = (unsigned long)raw_cpu_read(overflow_stack_ptr); console_verbose(); pr_emerg("Insufficient stack space to handle exception!"); diff --git a/arch/arm/lib/call_with_stack.S b/arch/arm/lib/call_with_stack.S index 0a268a6c513c..5030d4e8d126 100644 --- a/arch/arm/lib/call_with_stack.S +++ b/arch/arm/lib/call_with_stack.S @@ -46,4 +46,6 @@ UNWIND( .setfp fpreg, sp ) pop {fpreg, pc} UNWIND( .fnend ) #endif + .globl call_with_stack_end +call_with_stack_end: ENDPROC(call_with_stack) diff --git a/arch/arm/mach-aspeed/Kconfig b/arch/arm/mach-aspeed/Kconfig index cd8a15be0724..080019aa6fcd 100644 --- a/arch/arm/mach-aspeed/Kconfig +++ b/arch/arm/mach-aspeed/Kconfig @@ -19,9 +19,9 @@ config MACH_ASPEED_G4 select PINCTRL_ASPEED_G4 select FTTMR010_TIMER help - Say yes if you intend to run on an Aspeed ast2400 or similar - fourth generation BMCs, such as those used by OpenPower Power8 - systems. + Say yes if you intend to run on an Aspeed ast2400 or similar + fourth generation BMCs, such as those used by OpenPower Power8 + systems. config MACH_ASPEED_G5 bool "Aspeed SoC 5th Generation" @@ -29,8 +29,8 @@ config MACH_ASPEED_G5 select PINCTRL_ASPEED_G5 select FTTMR010_TIMER help - Say yes if you intend to run on an Aspeed ast2500 or similar - fifth generation Aspeed BMCs. + Say yes if you intend to run on an Aspeed ast2500 or similar + fifth generation Aspeed BMCs. config MACH_ASPEED_G6 bool "Aspeed SoC 6th Generation" @@ -40,7 +40,7 @@ config MACH_ASPEED_G6 select ARM_GIC select HAVE_ARM_ARCH_TIMER help - Say yes if you intend to run on an Aspeed ast2600 or similar - sixth generation Aspeed BMCs. + Say yes if you intend to run on an Aspeed ast2600 or similar + sixth generation Aspeed BMCs. endif diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot deleted file mode 100644 index 5dde7328a7a9..000000000000 --- a/arch/arm/mach-at91/Makefile.boot +++ /dev/null @@ -1,4 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -# Empty file waiting for deletion once Makefile.boot isn't needed any more. -# Patch waits for application at -# https://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=7889/1 . diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index df6d673e83d5..f4501dea98b0 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -541,10 +541,42 @@ extern u32 at91_pm_suspend_in_sram_sz; static int at91_suspend_finish(unsigned long val) { + unsigned char modified_gray_code[] = { + 0x00, 0x01, 0x02, 0x03, 0x06, 0x07, 0x04, 0x05, 0x0c, 0x0d, + 0x0e, 0x0f, 0x0a, 0x0b, 0x08, 0x09, 0x18, 0x19, 0x1a, 0x1b, + 0x1e, 0x1f, 0x1c, 0x1d, 0x14, 0x15, 0x16, 0x17, 0x12, 0x13, + 0x10, 0x11, + }; + unsigned int tmp, index; int i; if (soc_pm.data.mode == AT91_PM_BACKUP && soc_pm.data.ramc_phy) { /* + * Bootloader will perform DDR recalibration and will try to + * restore the ZQ0SR0 with the value saved here. But the + * calibration is buggy and restoring some values from ZQ0SR0 + * is forbidden and risky thus we need to provide processed + * values for these (modified gray code values). + */ + tmp = readl(soc_pm.data.ramc_phy + DDR3PHY_ZQ0SR0); + + /* Store pull-down output impedance select. */ + index = (tmp >> DDR3PHY_ZQ0SR0_PDO_OFF) & 0x1f; + soc_pm.bu->ddr_phy_calibration[0] = modified_gray_code[index]; + + /* Store pull-up output impedance select. */ + index = (tmp >> DDR3PHY_ZQ0SR0_PUO_OFF) & 0x1f; + soc_pm.bu->ddr_phy_calibration[0] |= modified_gray_code[index]; + + /* Store pull-down on-die termination impedance select. */ + index = (tmp >> DDR3PHY_ZQ0SR0_PDODT_OFF) & 0x1f; + soc_pm.bu->ddr_phy_calibration[0] |= modified_gray_code[index]; + + /* Store pull-up on-die termination impedance select. */ + index = (tmp >> DDR3PHY_ZQ0SRO_PUODT_OFF) & 0x1f; + soc_pm.bu->ddr_phy_calibration[0] |= modified_gray_code[index]; + + /* * The 1st 8 words of memory might get corrupted in the process * of DDR PHY recalibration; it is saved here in securam and it * will be restored later, after recalibration, by bootloader @@ -1066,10 +1098,6 @@ static int __init at91_pm_backup_init(void) of_scan_flat_dt(at91_pm_backup_scan_memcs, &located); if (!located) goto securam_fail; - - /* DDR3PHY_ZQ0SR0 */ - soc_pm.bu->ddr_phy_calibration[0] = readl(soc_pm.data.ramc_phy + - 0x188); } return 0; diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S index abe4ced33eda..ffed4d949042 100644 --- a/arch/arm/mach-at91/pm_suspend.S +++ b/arch/arm/mach-at91/pm_suspend.S @@ -172,9 +172,15 @@ sr_ena_2: /* Put DDR PHY's DLL in bypass mode for non-backup modes. */ cmp r7, #AT91_PM_BACKUP beq sr_ena_3 - ldr tmp1, [r3, #DDR3PHY_PIR] - orr tmp1, tmp1, #DDR3PHY_PIR_DLLBYP - str tmp1, [r3, #DDR3PHY_PIR] + + /* Disable DX DLLs. */ + ldr tmp1, [r3, #DDR3PHY_DX0DLLCR] + orr tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS + str tmp1, [r3, #DDR3PHY_DX0DLLCR] + + ldr tmp1, [r3, #DDR3PHY_DX1DLLCR] + orr tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS + str tmp1, [r3, #DDR3PHY_DX1DLLCR] sr_ena_3: /* Power down DDR PHY data receivers. */ @@ -221,10 +227,14 @@ sr_ena_3: bic tmp1, tmp1, #DDR3PHY_DSGCR_ODTPDD_ODT0 str tmp1, [r3, #DDR3PHY_DSGCR] - /* Take DDR PHY's DLL out of bypass mode. */ - ldr tmp1, [r3, #DDR3PHY_PIR] - bic tmp1, tmp1, #DDR3PHY_PIR_DLLBYP - str tmp1, [r3, #DDR3PHY_PIR] + /* Enable DX DLLs. */ + ldr tmp1, [r3, #DDR3PHY_DX0DLLCR] + bic tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS + str tmp1, [r3, #DDR3PHY_DX0DLLCR] + + ldr tmp1, [r3, #DDR3PHY_DX1DLLCR] + bic tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS + str tmp1, [r3, #DDR3PHY_DX1DLLCR] /* Enable quasi-dynamic programming. */ mov tmp1, #0 diff --git a/arch/arm/mach-davinci/Makefile.boot b/arch/arm/mach-davinci/Makefile.boot deleted file mode 100644 index d36b251f325b..000000000000 --- a/arch/arm/mach-davinci/Makefile.boot +++ /dev/null @@ -1,8 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -zreladdr-$(CONFIG_ARCH_DAVINCI_DA8XX) += 0xc0008000 -params_phys-$(CONFIG_ARCH_DAVINCI_DA8XX) := 0xc0000100 -initrd_phys-$(CONFIG_ARCH_DAVINCI_DA8XX) := 0xc0800000 - -zreladdr-$(CONFIG_ARCH_DAVINCI_DMx) += 0x80008000 -params_phys-$(CONFIG_ARCH_DAVINCI_DMx) := 0x80000100 -initrd_phys-$(CONFIG_ARCH_DAVINCI_DMx) := 0x80800000 diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 92d74bc71967..d752ee2b30ff 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -516,8 +516,8 @@ exp_setup_sela_fail: return ret; } -static int da850_evm_ui_expander_teardown(struct i2c_client *client, - unsigned gpio, unsigned ngpio, void *c) +static void da850_evm_ui_expander_teardown(struct i2c_client *client, + unsigned gpio, unsigned ngpio, void *c) { platform_device_unregister(&da850_evm_ui_keys_device); @@ -529,8 +529,6 @@ static int da850_evm_ui_expander_teardown(struct i2c_client *client, gpio_free(gpio + DA850_EVM_UI_EXP_SEL_C); gpio_free(gpio + DA850_EVM_UI_EXP_SEL_B); gpio_free(gpio + DA850_EVM_UI_EXP_SEL_A); - - return 0; } /* assign the baseboard expander's GPIOs after the UI board's */ @@ -697,13 +695,11 @@ io_exp_setup_sw_fail: return ret; } -static int da850_evm_bb_expander_teardown(struct i2c_client *client, - unsigned gpio, unsigned ngpio, void *c) +static void da850_evm_bb_expander_teardown(struct i2c_client *client, + unsigned gpio, unsigned ngpio, void *c) { platform_device_unregister(&da850_evm_bb_leds_device); platform_device_unregister(&da850_evm_bb_keys_device); - - return 0; } static struct pca953x_platform_data da850_evm_ui_expander_info = { diff --git a/arch/arm/mach-dove/Makefile b/arch/arm/mach-dove/Makefile index e83f6492834d..da373a5768ba 100644 --- a/arch/arm/mach-dove/Makefile +++ b/arch/arm/mach-dove/Makefile @@ -1,5 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 -ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-orion/include +ccflags-y := -I$(srctree)/arch/arm/plat-orion/include obj-y += common.o obj-$(CONFIG_DOVE_LEGACY) += irq.o mpp.o diff --git a/arch/arm/mach-dove/Makefile.boot b/arch/arm/mach-dove/Makefile.boot deleted file mode 100644 index e4dd1d26038f..000000000000 --- a/arch/arm/mach-dove/Makefile.boot +++ /dev/null @@ -1,4 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only - zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-ep93xx/Makefile.boot b/arch/arm/mach-ep93xx/Makefile.boot deleted file mode 100644 index 4c0a039a5027..000000000000 --- a/arch/arm/mach-ep93xx/Makefile.boot +++ /dev/null @@ -1,2 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -# Empty file waiting for deletion once Makefile.boot isn't needed any more. diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 2d58e273c96d..95e731676cea 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -22,6 +22,7 @@ #include <linux/io.h> #include <linux/gpio.h> #include <linux/leds.h> +#include <linux/uaccess.h> #include <linux/termios.h> #include <linux/amba/bus.h> #include <linux/amba/serial.h> diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig index acc10b1caa69..b5e7cbfed119 100644 --- a/arch/arm/mach-footbridge/Kconfig +++ b/arch/arm/mach-footbridge/Kconfig @@ -1,38 +1,37 @@ # SPDX-License-Identifier: GPL-2.0-only -if ARCH_FOOTBRIDGE +menuconfig ARCH_FOOTBRIDGE + bool "FootBridge Implementations" + depends on ARCH_MULTI_V4 && !(ARCH_MULTI_V4T || ARCH_MULTI_V5) + depends on !(ARCH_MOXART || ARCH_GEMINI || ARCH_SA1100) + depends on ATAGS + depends on CPU_LITTLE_ENDIAN + depends on MMU + select ARCH_NO_SG_CHAIN + select CPU_SA110 + select FOOTBRIDGE + select NEED_MACH_MEMORY_H + help + Support for systems based on the DC21285 companion chip + ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. -menu "Footbridge Implementations" +if ARCH_FOOTBRIDGE config ARCH_CATS bool "CATS" depends on UNUSED_BOARD_FILES select CLKEVT_I8253 select CLKSRC_I8253 - select FOOTBRIDGE_HOST select ISA - select ISA_DMA select FORCE_PCI help Say Y here if you intend to run this kernel on the CATS. Saying N will reduce the size of the Footbridge kernel. -config ARCH_EBSA285_ADDIN - bool "EBSA285 (addin mode)" - select ARCH_EBSA285 - select FOOTBRIDGE_ADDIN - help - Say Y here if you intend to run this kernel on the EBSA285 card - in addin mode. - - Saying N will reduce the size of the Footbridge kernel. - config ARCH_EBSA285_HOST bool "EBSA285 (host mode)" select ARCH_EBSA285 - select FOOTBRIDGE_HOST select ISA - select ISA_DMA select ARCH_MAY_HAVE_PC_FDC select FORCE_PCI help @@ -45,9 +44,7 @@ config ARCH_NETWINDER bool "NetWinder" select CLKEVT_I8253 select CLKSRC_I8253 - select FOOTBRIDGE_HOST select ISA - select ISA_DMA select FORCE_PCI help Say Y here if you intend to run this kernel on the Rebel.COM @@ -57,23 +54,12 @@ config ARCH_NETWINDER Saying N will reduce the size of the Footbridge kernel. -endmenu - # Footbridge support config FOOTBRIDGE - select ARCH_HAS_PHYS_TO_DMA - bool - -# Footbridge in host mode -config FOOTBRIDGE_HOST - bool + def_bool y select ARCH_MIGHT_HAVE_PC_SERIO + select ISA_DMA_API -# Footbridge in addin mode -config FOOTBRIDGE_ADDIN - bool - -# EBSA285 board in either host or addin mode config ARCH_EBSA285 bool diff --git a/arch/arm/mach-footbridge/Makefile b/arch/arm/mach-footbridge/Makefile index 6262993c0555..55d570739f19 100644 --- a/arch/arm/mach-footbridge/Makefile +++ b/arch/arm/mach-footbridge/Makefile @@ -5,11 +5,11 @@ # Object file lists. -obj-y := common.o dma.o isa-irq.o +obj-y := common.o isa-irq.o isa.o isa-rtc.o dma-isa.o pci-y += dc21285.o pci-$(CONFIG_ARCH_CATS) += cats-pci.o -pci-$(CONFIG_ARCH_EBSA285_HOST) += ebsa285-pci.o +pci-$(CONFIG_ARCH_EBSA285) += ebsa285-pci.o pci-$(CONFIG_ARCH_NETWINDER) += netwinder-pci.o obj-$(CONFIG_ARCH_CATS) += cats-hw.o isa-timer.o @@ -18,4 +18,3 @@ obj-$(CONFIG_ARCH_NETWINDER) += netwinder-hw.o isa-timer.o obj-$(CONFIG_PCI) +=$(pci-y) -obj-$(CONFIG_ISA) += isa.o isa-rtc.o diff --git a/arch/arm/mach-footbridge/Makefile.boot b/arch/arm/mach-footbridge/Makefile.boot deleted file mode 100644 index e4313e912cac..000000000000 --- a/arch/arm/mach-footbridge/Makefile.boot +++ /dev/null @@ -1,5 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only - zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 - diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c index 5020eb96b025..629e4676ed77 100644 --- a/arch/arm/mach-footbridge/common.c +++ b/arch/arm/mach-footbridge/common.c @@ -198,9 +198,6 @@ void __init footbridge_init_irq(void) __fb_init_irq(); - if (!footbridge_cfn_mode()) - return; - if (machine_is_ebsa285()) /* The following is dependent on which slot * you plug the Southbridge card into. We @@ -221,21 +218,13 @@ void __init footbridge_init_irq(void) * commented out since there is a "No Fix" problem with it. Not mapping * it means that we have extra bullet protection on our feet. */ -static struct map_desc fb_common_io_desc[] __initdata = { +static struct map_desc ebsa285_host_io_desc[] __initdata = { { .virtual = ARMCSR_BASE, .pfn = __phys_to_pfn(DC21285_ARMCSR_BASE), .length = ARMCSR_SIZE, .type = MT_DEVICE, - } -}; - -/* - * The mapping when the footbridge is in host mode. We don't map any of - * this when we are in add-in mode. - */ -static struct map_desc ebsa285_host_io_desc[] __initdata = { -#if defined(CONFIG_ARCH_FOOTBRIDGE) && defined(CONFIG_FOOTBRIDGE_HOST) + }, { .virtual = PCIMEM_BASE, .pfn = __phys_to_pfn(DC21285_PCI_MEM), @@ -257,26 +246,12 @@ static struct map_desc ebsa285_host_io_desc[] __initdata = { .length = PCIIACK_SIZE, .type = MT_DEVICE, }, -#endif }; void __init footbridge_map_io(void) { - /* - * Set up the common mapping first; we need this to - * determine whether we're in host mode or not. - */ - iotable_init(fb_common_io_desc, ARRAY_SIZE(fb_common_io_desc)); - - /* - * Now, work out what we've got to map in addition on this - * platform. - */ - if (footbridge_cfn_mode()) { - iotable_init(ebsa285_host_io_desc, ARRAY_SIZE(ebsa285_host_io_desc)); - pci_map_io_early(__phys_to_pfn(DC21285_PCI_IO)); - } - + iotable_init(ebsa285_host_io_desc, ARRAY_SIZE(ebsa285_host_io_desc)); + pci_map_io_early(__phys_to_pfn(DC21285_PCI_IO)); vga_base = PCIMEM_BASE; } @@ -306,49 +281,3 @@ void footbridge_restart(enum reboot_mode mode, const char *cmd) *CSR_SA110_CNTL |= (1 << 13); } } - -#ifdef CONFIG_FOOTBRIDGE_ADDIN - -static inline unsigned long fb_bus_sdram_offset(void) -{ - return *CSR_PCISDRAMBASE & 0xfffffff0; -} - -/* - * These two functions convert virtual addresses to PCI addresses and PCI - * addresses to virtual addresses. Note that it is only legal to use these - * on memory obtained via get_zeroed_page or kmalloc. - */ -unsigned long __virt_to_bus(unsigned long res) -{ - WARN_ON(res < PAGE_OFFSET || res >= (unsigned long)high_memory); - - return res + (fb_bus_sdram_offset() - PAGE_OFFSET); -} -EXPORT_SYMBOL(__virt_to_bus); - -unsigned long __bus_to_virt(unsigned long res) -{ - res = res - (fb_bus_sdram_offset() - PAGE_OFFSET); - - WARN_ON(res < PAGE_OFFSET || res >= (unsigned long)high_memory); - - return res; -} -EXPORT_SYMBOL(__bus_to_virt); -#else -static inline unsigned long fb_bus_sdram_offset(void) -{ - return BUS_OFFSET; -} -#endif /* CONFIG_FOOTBRIDGE_ADDIN */ - -dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr) -{ - return paddr + (fb_bus_sdram_offset() - PHYS_OFFSET); -} - -phys_addr_t dma_to_phys(struct device *dev, dma_addr_t dev_addr) -{ - return dev_addr - (fb_bus_sdram_offset() - PHYS_OFFSET); -} diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c index f9713dc561cf..f8920d0010de 100644 --- a/arch/arm/mach-footbridge/dc21285.c +++ b/arch/arm/mach-footbridge/dc21285.c @@ -5,6 +5,7 @@ * Copyright (C) 1998-2001 Russell King * Copyright (C) 1998-2000 Phil Blundell */ +#include <linux/dma-map-ops.h> #include <linux/kernel.h> #include <linux/pci.h> #include <linux/interrupt.h> @@ -241,13 +242,26 @@ static irqreturn_t dc21285_parity_irq(int irq, void *dev_id) return IRQ_HANDLED; } +static int dc21285_pci_bus_notifier(struct notifier_block *nb, + unsigned long action, + void *data) +{ + if (action != BUS_NOTIFY_ADD_DEVICE) + return NOTIFY_DONE; + + dma_direct_set_offset(data, PHYS_OFFSET, BUS_OFFSET, SZ_256M); + + return NOTIFY_OK; +} + +static struct notifier_block dc21285_pci_bus_nb = { + .notifier_call = dc21285_pci_bus_notifier, +}; + int __init dc21285_setup(int nr, struct pci_sys_data *sys) { struct resource *res; - if (nr || !footbridge_cfn_mode()) - return 0; - res = kcalloc(2, sizeof(struct resource), GFP_KERNEL); if (!res) { printk("out of memory for root bus resources"); @@ -269,6 +283,8 @@ int __init dc21285_setup(int nr, struct pci_sys_data *sys) pci_add_resource_offset(&sys->resources, &res[0], sys->mem_offset); pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset); + bus_register_notifier(&pci_bus_type, &dc21285_pci_bus_nb); + return 1; } @@ -278,7 +294,6 @@ int __init dc21285_setup(int nr, struct pci_sys_data *sys) void __init dc21285_preinit(void) { unsigned int mem_size, mem_mask; - int cfn_mode; pcibios_min_mem = 0x81000000; @@ -298,21 +313,15 @@ void __init dc21285_preinit(void) *CSR_CSRBASEOFFSET = 0; *CSR_PCIADDR_EXTN = 0; - cfn_mode = __footbridge_cfn_mode(); - printk(KERN_INFO "PCI: DC21285 footbridge, revision %02lX, in " - "%s mode\n", *CSR_CLASSREV & 0xff, cfn_mode ? - "central function" : "addin"); - - if (footbridge_cfn_mode()) { - /* - * Clear any existing errors - we aren't - * interested in historical data... - */ - *CSR_SA110_CNTL = (*CSR_SA110_CNTL & 0xffffde07) | - SA110_CNTL_RXSERR; - *CSR_PCICMD = (*CSR_PCICMD & 0xffff) | PCICMD_ERROR_BITS; - } + "central function mode\n", *CSR_CLASSREV & 0xff); + + /* + * Clear any existing errors - we aren't + * interested in historical data... + */ + *CSR_SA110_CNTL = (*CSR_SA110_CNTL & 0xffffde07) | SA110_CNTL_RXSERR; + *CSR_PCICMD = (*CSR_PCICMD & 0xffff) | PCICMD_ERROR_BITS; timer_setup(&serr_timer, dc21285_enable_error, 0); timer_setup(&perr_timer, dc21285_enable_error, 0); @@ -331,29 +340,18 @@ void __init dc21285_preinit(void) dc21285_request_irq(IRQ_PCI_DPERR, dc21285_dparity_irq, 0, "PCI data parity", NULL); - if (cfn_mode) { - /* - * Map our SDRAM at a known address in PCI space, just in case - * the firmware had other ideas. Using a nonzero base is - * necessary, since some VGA cards forcefully use PCI addresses - * in the range 0x000a0000 to 0x000c0000. (eg, S3 cards). - */ - *CSR_PCICSRBASE = 0xf4000000; - *CSR_PCICSRIOBASE = 0; - *CSR_PCISDRAMBASE = __virt_to_bus(PAGE_OFFSET); - *CSR_PCIROMBASE = 0; - *CSR_PCICMD = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | - PCI_COMMAND_INVALIDATE | PCICMD_ERROR_BITS; - } else if (footbridge_cfn_mode() != 0) { - /* - * If we are not compiled to accept "add-in" mode, then - * we are using a constant virt_to_bus translation which - * can not hope to cater for the way the host BIOS has - * set up the machine. - */ - panic("PCI: this kernel is compiled for central " - "function mode only"); - } + /* + * Map our SDRAM at a known address in PCI space, just in case + * the firmware had other ideas. Using a nonzero base is + * necessary, since some VGA cards forcefully use PCI addresses + * in the range 0x000a0000 to 0x000c0000. (eg, S3 cards). + */ + *CSR_PCICSRBASE = 0xf4000000; + *CSR_PCICSRIOBASE = 0; + *CSR_PCISDRAMBASE = BUS_OFFSET; + *CSR_PCIROMBASE = 0; + *CSR_PCICMD = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | + PCI_COMMAND_INVALIDATE | PCICMD_ERROR_BITS; } void __init dc21285_postinit(void) diff --git a/arch/arm/kernel/dma-isa.c b/arch/arm/mach-footbridge/dma-isa.c index 2d90ecce5a11..937f5376d5e7 100644 --- a/arch/arm/kernel/dma-isa.c +++ b/arch/arm/mach-footbridge/dma-isa.c @@ -1,7 +1,5 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * linux/arch/arm/kernel/dma-isa.c - * * Copyright (C) 1999-2000 Russell King * * ISA DMA primitives @@ -13,6 +11,7 @@ * arch/arm/kernel/dma-ebsa285.c * Copyright (C) 1998 Phil Blundell */ +#include <linux/dma-map-ops.h> #include <linux/ioport.h> #include <linux/init.h> #include <linux/dma-mapping.h> @@ -20,6 +19,7 @@ #include <asm/dma.h> #include <asm/mach/dma.h> +#include <asm/hardware/dec21285.h> #define ISA_DMA_MASK 0 #define ISA_DMA_MODE 1 @@ -157,7 +157,7 @@ static dma_t isa_dma[8]; /* * ISA DMA always starts at channel 0 */ -void __init isa_init_dma(void) +static int __init isa_dma_init(void) { /* * Try to autodetect presence of an ISA DMA controller. @@ -222,4 +222,9 @@ void __init isa_init_dma(void) request_dma(DMA_ISA_CASCADE, "cascade"); } + + dma_direct_set_offset(&isa_dma_dev, PHYS_OFFSET, BUS_OFFSET, SZ_256M); + + return 0; } +core_initcall(isa_dma_init); diff --git a/arch/arm/mach-footbridge/dma.c b/arch/arm/mach-footbridge/dma.c deleted file mode 100644 index 86618074a7a5..000000000000 --- a/arch/arm/mach-footbridge/dma.c +++ /dev/null @@ -1,58 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * linux/arch/arm/kernel/dma-ebsa285.c - * - * Copyright (C) 1998 Phil Blundell - * - * DMA functions specific to EBSA-285/CATS architectures - * - * Changelog: - * 09-Nov-1998 RMK Split out ISA DMA functions to dma-isa.c - * 17-Mar-1999 RMK Allow any EBSA285-like architecture to have - * ISA DMA controllers. - */ -#include <linux/init.h> -#include <linux/io.h> -#include <linux/spinlock.h> -#include <linux/scatterlist.h> - -#include <asm/dma.h> - -#include <asm/mach/dma.h> -#include <asm/hardware/dec21285.h> - -#if 0 -static int fb_dma_request(unsigned int chan, dma_t *dma) -{ - return -EINVAL; -} - -static void fb_dma_enable(unsigned int chan, dma_t *dma) -{ -} - -static void fb_dma_disable(unsigned int chan, dma_t *dma) -{ -} - -static struct dma_ops fb_dma_ops = { - .type = "fb", - .request = fb_dma_request, - .enable = fb_dma_enable, - .disable = fb_dma_disable, -}; -#endif - -static int __init fb_dma_init(void) -{ -#if 0 - dma[_DC21285_DMA(0)].d_ops = &fb_dma_ops; - dma[_DC21285_DMA(1)].d_ops = &fb_dma_ops; -#endif -#ifdef CONFIG_ISA_DMA - if (footbridge_cfn_mode()) - isa_init_dma(); -#endif - return 0; -} -core_initcall(fb_dma_init); diff --git a/arch/arm/mach-footbridge/include/mach/dma-direct.h b/arch/arm/mach-footbridge/include/mach/dma-direct.h deleted file mode 100644 index 01f9e8367c00..000000000000 --- a/arch/arm/mach-footbridge/include/mach/dma-direct.h +++ /dev/null @@ -1,8 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef MACH_FOOTBRIDGE_DMA_DIRECT_H -#define MACH_FOOTBRIDGE_DMA_DIRECT_H 1 - -dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr); -phys_addr_t dma_to_phys(struct device *dev, dma_addr_t dev_addr); - -#endif /* MACH_FOOTBRIDGE_DMA_DIRECT_H */ diff --git a/arch/arm/mach-footbridge/include/mach/isa-dma.h b/arch/arm/mach-footbridge/include/mach/isa-dma.h index 8a1b991076e1..b10731a1f66a 100644 --- a/arch/arm/mach-footbridge/include/mach/isa-dma.h +++ b/arch/arm/mach-footbridge/include/mach/isa-dma.h @@ -10,17 +10,9 @@ #ifndef __ASM_ARCH_DMA_H #define __ASM_ARCH_DMA_H -/* - * The 21285 has two internal DMA channels; we call these 8 and 9. - * On CATS hardware we have an additional eight ISA dma channels - * numbered 0..7. - */ -#define _ISA_DMA(x) (0+(x)) -#define _DC21285_DMA(x) (8+(x)) - -#define MAX_DMA_CHANNELS 10 +#define MAX_DMA_CHANNELS 8 -#define DMA_FLOPPY _ISA_DMA(2) -#define DMA_ISA_CASCADE _ISA_DMA(4) +#define DMA_FLOPPY (2) +#define DMA_ISA_CASCADE (4) #endif /* _ASM_ARCH_DMA_H */ diff --git a/arch/arm/mach-footbridge/include/mach/memory.h b/arch/arm/mach-footbridge/include/mach/memory.h index 3a5d2638c18f..9516877667d7 100644 --- a/arch/arm/mach-footbridge/include/mach/memory.h +++ b/arch/arm/mach-footbridge/include/mach/memory.h @@ -16,37 +16,6 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H - -#if defined(CONFIG_FOOTBRIDGE_ADDIN) -/* - * If we may be using add-in footbridge mode, then we must - * use the out-of-line translation that makes use of the - * PCI BAR - */ -#ifndef __ASSEMBLY__ -extern unsigned long __virt_to_bus(unsigned long); -extern unsigned long __bus_to_virt(unsigned long); -#endif -#define __virt_to_bus __virt_to_bus -#define __bus_to_virt __bus_to_virt - -#elif defined(CONFIG_FOOTBRIDGE_HOST) - -/* - * The footbridge is programmed to expose the system RAM at 0xe0000000. - * The requirement is that the RAM isn't placed at bus address 0, which - * would clash with VGA cards. - */ -#define BUS_OFFSET 0xe0000000 -#define __virt_to_bus(x) ((x) + (BUS_OFFSET - PAGE_OFFSET)) -#define __bus_to_virt(x) ((x) - (BUS_OFFSET - PAGE_OFFSET)) - -#else - -#error "Undefined footbridge mode" - -#endif - /* * Cache flushing area. */ diff --git a/arch/arm/mach-footbridge/isa.c b/arch/arm/mach-footbridge/isa.c index ec5af521cf95..84caccddce44 100644 --- a/arch/arm/mach-footbridge/isa.c +++ b/arch/arm/mach-footbridge/isa.c @@ -79,16 +79,12 @@ static int __init footbridge_isa_init(void) { int err = 0; - if (!footbridge_cfn_mode()) - return 0; - /* Personal server doesn't have RTC */ - if (!machine_is_personal_server()) { - isa_rtc_init(); - err = platform_device_register(&rtc_device); - if (err) - printk(KERN_ERR "Unable to register RTC device: %d\n", err); - } + isa_rtc_init(); + err = platform_device_register(&rtc_device); + if (err) + printk(KERN_ERR "Unable to register RTC device: %d\n", err); + err = platform_device_register(&serial_device); if (err) printk(KERN_ERR "Unable to register serial device: %d\n", err); diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 77e435df8dfe..ab767f059929 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only menuconfig ARCH_MXC bool "Freescale i.MX family" - depends on (ARCH_MULTI_V4_V5 && CPU_LITTLE_ENDIAN) || \ + depends on ((ARCH_MULTI_V4T || ARCH_MULTI_V5) && CPU_LITTLE_ENDIAN) || \ ARCH_MULTI_V6_V7 || ARM_SINGLE_ARMV7M select CLKSRC_IMX_GPT select GENERIC_IRQ_CHIP diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/arch/arm/mach-imx/Makefile.boot +++ /dev/null diff --git a/arch/arm/mach-iop32x/Makefile.boot b/arch/arm/mach-iop32x/Makefile.boot deleted file mode 100644 index 5c3af01c4000..000000000000 --- a/arch/arm/mach-iop32x/Makefile.boot +++ /dev/null @@ -1,4 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only - zreladdr-y += 0xa0008000 -params_phys-y := 0xa0000100 -initrd_phys-y := 0xa0800000 diff --git a/arch/arm/mach-ixp4xx/ixp4xx-of.c b/arch/arm/mach-ixp4xx/ixp4xx-of.c index f9904716ec7f..f543e2adae0c 100644 --- a/arch/arm/mach-ixp4xx/ixp4xx-of.c +++ b/arch/arm/mach-ixp4xx/ixp4xx-of.c @@ -46,7 +46,7 @@ static void __init ixp4xx_of_map_io(void) } /* - * We handle 4 differen SoC families. These compatible strings are enough + * We handle 4 different SoC families. These compatible strings are enough * to provide the core so that different boards can add their more detailed * specifics. */ diff --git a/arch/arm/mach-lpc18xx/Makefile.boot b/arch/arm/mach-lpc18xx/Makefile.boot deleted file mode 100644 index cec195d4fcba..000000000000 --- a/arch/arm/mach-lpc18xx/Makefile.boot +++ /dev/null @@ -1,4 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -# Empty file waiting for deletion once Makefile.boot isn't needed any more. -# Patch waits for application at -# http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=7889/1 . diff --git a/arch/arm/mach-lpc32xx/Makefile.boot b/arch/arm/mach-lpc32xx/Makefile.boot deleted file mode 100644 index 37d09ddb27f8..000000000000 --- a/arch/arm/mach-lpc32xx/Makefile.boot +++ /dev/null @@ -1,4 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only - zreladdr-y += 0x80008000 -params_phys-y := 0x80000100 -initrd_phys-y := 0x82000000 diff --git a/arch/arm/mach-mv78xx0/Makefile b/arch/arm/mach-mv78xx0/Makefile index a839e960b8c6..50aff70065f2 100644 --- a/arch/arm/mach-mv78xx0/Makefile +++ b/arch/arm/mach-mv78xx0/Makefile @@ -1,5 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 -ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-orion/include +ccflags-y := -I$(srctree)/arch/arm/plat-orion/include obj-y += common.o mpp.o irq.o pcie.o obj-$(CONFIG_MACH_DB78X00_BP) += db78x00-bp-setup.o diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile index cb106899dd7c..c21733cbb4fa 100644 --- a/arch/arm/mach-mvebu/Makefile +++ b/arch/arm/mach-mvebu/Makefile @@ -1,5 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 -ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-orion/include +ccflags-y := -I$(srctree)/arch/arm/plat-orion/include AFLAGS_coherency_ll.o := -Wa,-march=armv7-a CFLAGS_pmsu.o := -march=armv7-a diff --git a/arch/arm/mach-nspire/Kconfig b/arch/arm/mach-nspire/Kconfig index eb9916233dea..b7a3871876d7 100644 --- a/arch/arm/mach-nspire/Kconfig +++ b/arch/arm/mach-nspire/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only config ARCH_NSPIRE bool "TI-NSPIRE based" - depends on ARCH_MULTI_V4_V5 + depends on ARCH_MULTI_V4T depends on CPU_LITTLE_ENDIAN select CPU_ARM926T select GENERIC_IRQ_CHIP diff --git a/arch/arm/mach-omap1/Makefile.boot b/arch/arm/mach-omap1/Makefile.boot deleted file mode 100644 index 2c771515a606..000000000000 --- a/arch/arm/mach-omap1/Makefile.boot +++ /dev/null @@ -1,4 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only - zreladdr-y += 0x10008000 -params_phys-y := 0x10000100 -initrd_phys-y := 0x10800000 diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index ec049cee49c6..291d294b5824 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -141,13 +141,6 @@ #define HTCPLD_GPIO_DOWN_DPAD HTCPLD_BASE(7, 4) #define HTCPLD_GPIO_ENTER_DPAD HTCPLD_BASE(7, 3) -/* - * The htcpld chip requires a gpio write to a specific line - * to re-enable interrupts after one has occurred. - */ -#define HTCPLD_GPIO_INT_RESET_HI HTCPLD_BASE(2, 7) -#define HTCPLD_GPIO_INT_RESET_LO HTCPLD_BASE(2, 0) - /* Chip 5 */ #define HTCPLD_IRQ_RIGHT_KBD HTCPLD_IRQ(0, 7) #define HTCPLD_IRQ_UP_KBD HTCPLD_IRQ(0, 6) @@ -348,8 +341,6 @@ static struct htcpld_chip_platform_data htcpld_chips[] = { }; static struct htcpld_core_platform_data htcpld_pfdata = { - .int_reset_gpio_hi = HTCPLD_GPIO_INT_RESET_HI, - .int_reset_gpio_lo = HTCPLD_GPIO_INT_RESET_LO, .i2c_adapter_id = 1, .chip = htcpld_chips, diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile index 1a585a62d5e6..572c3520f7fe 100644 --- a/arch/arm/mach-orion5x/Makefile +++ b/arch/arm/mach-orion5x/Makefile @@ -1,5 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 -ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-orion/include +ccflags-y := -I$(srctree)/arch/arm/plat-orion/include obj-y += common.o pci.o irq.o mpp.o obj-$(CONFIG_MACH_DB88F5281) += db88f5281-setup.o diff --git a/arch/arm/mach-rpc/Kconfig b/arch/arm/mach-rpc/Kconfig new file mode 100644 index 000000000000..55f6d829b677 --- /dev/null +++ b/arch/arm/mach-rpc/Kconfig @@ -0,0 +1,21 @@ +config ARCH_RPC + bool "RiscPC" + depends on ARCH_MULTI_V4 && !(ARCH_MULTI_V4T || ARCH_MULTI_V5) + depends on !(ARCH_FOOTBRIDGE || ARCH_SA1100 || ARCH_MOXART || ARCH_GEMINI) + depends on !CC_IS_CLANG && GCC_VERSION < 90100 && GCC_VERSION >= 60000 + depends on CPU_LITTLE_ENDIAN + depends on ATAGS + depends on MMU + select ARCH_ACORN + select ARCH_MAY_HAVE_PC_FDC + select CPU_SA110 + select FIQ + select HAVE_PATA_PLATFORM + select ISA_DMA_API + select LEGACY_TIMER_TICK + select NEED_MACH_IO_H + select NEED_MACH_MEMORY_H + select NO_IOPORT_MAP + help + On the Acorn Risc-PC, Linux can support the internal IDE disk and + CD-ROM interface, serial and parallel port, and the floppy drive. diff --git a/arch/arm/mach-rpc/Makefile.boot b/arch/arm/mach-rpc/Makefile.boot deleted file mode 100644 index 0ed8e8fbde99..000000000000 --- a/arch/arm/mach-rpc/Makefile.boot +++ /dev/null @@ -1,5 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only - zreladdr-y += 0x10008000 -params_phys-y := 0x10000100 -initrd_phys-y := 0x18000000 - diff --git a/arch/arm/mach-s3c/Makefile.boot b/arch/arm/mach-s3c/Makefile.boot deleted file mode 100644 index 7f19e226035e..000000000000 --- a/arch/arm/mach-s3c/Makefile.boot +++ /dev/null @@ -1,9 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 - -ifeq ($(CONFIG_PM_H1940),y) - zreladdr-y += 0x30108000 - params_phys-y := 0x30100100 -else - zreladdr-y += 0x30008000 - params_phys-y := 0x30000100 -endif diff --git a/arch/arm/mach-s3c/devs.h b/arch/arm/mach-s3c/devs.h index 02b0c5750572..991b9b2006a1 100644 --- a/arch/arm/mach-s3c/devs.h +++ b/arch/arm/mach-s3c/devs.h @@ -33,8 +33,6 @@ extern struct platform_device s3c64xx_device_onenand1; extern struct platform_device s3c64xx_device_pcm0; extern struct platform_device s3c64xx_device_pcm1; extern struct platform_device s3c64xx_device_spi0; -extern struct platform_device s3c64xx_device_spi1; -extern struct platform_device s3c64xx_device_spi2; extern struct platform_device s3c_device_adc; extern struct platform_device s3c_device_cfcon; diff --git a/arch/arm/mach-s3c/mach-gta02.c b/arch/arm/mach-s3c/mach-gta02.c index abfdce765525..d50a81d85ae1 100644 --- a/arch/arm/mach-s3c/mach-gta02.c +++ b/arch/arm/mach-s3c/mach-gta02.c @@ -421,7 +421,14 @@ static struct s3c2410_platform_nand __initdata gta02_nand_info = { /* Get PMU to set USB current limit accordingly. */ static struct s3c2410_udc_mach_info gta02_udc_cfg __initdata = { .vbus_draw = gta02_udc_vbus_draw, - .pullup_pin = GTA02_GPIO_USB_PULLUP, +}; + +static struct gpiod_lookup_table gta02_udc_gpio_table = { + .dev_id = "s3c2410-usbgadget", + .table = { + GPIO_LOOKUP("GPIOB", 9, "pullup", GPIO_ACTIVE_HIGH), + { }, + }, }; /* USB */ @@ -555,6 +562,7 @@ static void __init gta02_machine_init(void) s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), S3C_GPIO_PULL_NONE); + gpiod_add_lookup_table(>a02_udc_gpio_table); gpiod_add_lookup_table(>a02_audio_gpio_table); gpiod_add_lookup_table(>a02_mmc_gpio_table); platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices)); diff --git a/arch/arm/mach-s3c/mach-h1940.c b/arch/arm/mach-s3c/mach-h1940.c index 032b18837855..83ac6cfdb1d8 100644 --- a/arch/arm/mach-s3c/mach-h1940.c +++ b/arch/arm/mach-s3c/mach-h1940.c @@ -167,9 +167,15 @@ static struct gpio_chip h1940_latch_gpiochip = { }; static struct s3c2410_udc_mach_info h1940_udc_cfg __initdata = { - .vbus_pin = S3C2410_GPG(5), - .vbus_pin_inverted = 1, - .pullup_pin = H1940_LATCH_USB_DP, +}; + +static struct gpiod_lookup_table h1940_udc_gpio_table = { + .dev_id = "s3c2410-usbgadget", + .table = { + GPIO_LOOKUP("GPIOG", 5, "vbus", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("H1940_LATCH", 7, "pullup", GPIO_ACTIVE_HIGH), + { }, + }, }; static struct s3c2410_ts_mach_info h1940_ts_cfg __initdata = { @@ -725,6 +731,7 @@ static void __init h1940_init(void) u32 tmp; s3c24xx_fb_set_platdata(&h1940_fb_info); + gpiod_add_lookup_table(&h1940_udc_gpio_table); gpiod_add_lookup_table(&h1940_mmc_gpio_table); gpiod_add_lookup_table(&h1940_audio_gpio_table); gpiod_add_lookup_table(&h1940_bat_gpio_table); diff --git a/arch/arm/mach-s3c/mach-jive.c b/arch/arm/mach-s3c/mach-jive.c index e32773175944..16859bb3bb13 100644 --- a/arch/arm/mach-s3c/mach-jive.c +++ b/arch/arm/mach-s3c/mach-jive.c @@ -493,7 +493,14 @@ static struct platform_device *jive_devices[] __initdata = { }; static struct s3c2410_udc_mach_info jive_udc_cfg __initdata = { - .vbus_pin = S3C2410_GPG(1), /* detect is on GPG1 */ +}; + +static struct gpiod_lookup_table jive_udc_gpio_table = { + .dev_id = "s3c2410-usbgadget", + .table = { + GPIO_LOOKUP("GPIOG", 1, "vbus", GPIO_ACTIVE_HIGH), + { }, + }, }; /* Jive power management device */ @@ -669,6 +676,7 @@ static void __init jive_machine_init(void) pm_power_off = jive_power_off; + gpiod_add_lookup_table(&jive_udc_gpio_table); gpiod_add_lookup_table(&jive_lcdspi_gpiod_table); gpiod_add_lookup_table(&jive_wm8750_gpiod_table); platform_add_devices(jive_devices, ARRAY_SIZE(jive_devices)); diff --git a/arch/arm/mach-s3c/mach-mini2440.c b/arch/arm/mach-s3c/mach-mini2440.c index a6d17ffcdba1..283be70ca622 100644 --- a/arch/arm/mach-s3c/mach-mini2440.c +++ b/arch/arm/mach-s3c/mach-mini2440.c @@ -93,9 +93,15 @@ static struct s3c2410_uartcfg mini2440_uartcfgs[] __initdata = { /* USB device UDC support */ static struct s3c2410_udc_mach_info mini2440_udc_cfg __initdata = { - .pullup_pin = S3C2410_GPC(5), }; +static struct gpiod_lookup_table mini2440_udc_gpio_table = { + .dev_id = "s3c2410-usbgadget", + .table = { + GPIO_LOOKUP("GPIOC", 5, "pullup", GPIO_ACTIVE_HIGH), + { }, + }, +}; /* LCD timing and setup */ @@ -755,6 +761,7 @@ static void __init mini2440_init(void) s3c24xx_fb_set_platdata(&mini2440_fb_info); } + gpiod_add_lookup_table(&mini2440_udc_gpio_table); s3c24xx_udc_set_platdata(&mini2440_udc_cfg); gpiod_add_lookup_table(&mini2440_mmc_gpio_table); s3c24xx_mci_set_platdata(&mini2440_mmc_cfg); diff --git a/arch/arm/mach-s3c/mach-n30.c b/arch/arm/mach-s3c/mach-n30.c index 75f5dc6351a1..90122fc6b2aa 100644 --- a/arch/arm/mach-s3c/mach-n30.c +++ b/arch/arm/mach-s3c/mach-n30.c @@ -84,9 +84,15 @@ static struct s3c2410_uartcfg n30_uartcfgs[] = { }; static struct s3c2410_udc_mach_info n30_udc_cfg __initdata = { - .vbus_pin = S3C2410_GPG(1), - .vbus_pin_inverted = 0, - .pullup_pin = S3C2410_GPB(3), +}; + +static struct gpiod_lookup_table n30_udc_gpio_table = { + .dev_id = "s3c2410-usbgadget", + .table = { + GPIO_LOOKUP("GPIOG", 1, "vbus", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("GPIOB", 3, "pullup", GPIO_ACTIVE_HIGH), + { }, + }, }; static struct gpio_keys_button n30_buttons[] = { @@ -595,6 +601,7 @@ static void __init n30_init(void) WARN_ON(gpio_request(S3C2410_GPG(4), "mmc power")); s3c24xx_fb_set_platdata(&n30_fb_info); + gpiod_add_lookup_table(&n30_udc_gpio_table); s3c24xx_udc_set_platdata(&n30_udc_cfg); gpiod_add_lookup_table(&n30_mci_gpio_table); s3c24xx_mci_set_platdata(&n30_mci_cfg); diff --git a/arch/arm/mach-s3c/mach-rx1950.c b/arch/arm/mach-s3c/mach-rx1950.c index 7a3e7c0a6484..d8c49e562660 100644 --- a/arch/arm/mach-s3c/mach-rx1950.c +++ b/arch/arm/mach-s3c/mach-rx1950.c @@ -643,9 +643,15 @@ static struct s3c2410_platform_nand rx1950_nand_info = { }; static struct s3c2410_udc_mach_info rx1950_udc_cfg __initdata = { - .vbus_pin = S3C2410_GPG(5), - .vbus_pin_inverted = 1, - .pullup_pin = S3C2410_GPJ(5), +}; + +static struct gpiod_lookup_table rx1950_udc_gpio_table = { + .dev_id = "s3c2410-usbgadget", + .table = { + GPIO_LOOKUP("GPIOG", 5, "vbus", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("GPIOJ", 5, "pullup", GPIO_ACTIVE_HIGH), + { }, + }, }; static struct s3c2410_ts_mach_info rx1950_ts_cfg __initdata = { @@ -847,6 +853,7 @@ static void __init rx1950_init_machine(void) gpio_direction_output(S3C2410_GPJ(6), 0); pwm_add_table(rx1950_pwm_lookup, ARRAY_SIZE(rx1950_pwm_lookup)); + gpiod_add_lookup_table(&rx1950_udc_gpio_table); gpiod_add_lookup_table(&rx1950_audio_gpio_table); gpiod_add_lookup_table(&rx1950_bat_gpio_table); /* Configure the I2S pins (GPE0...GPE4) in correct mode */ diff --git a/arch/arm/mach-s3c/mach-smdk2413.c b/arch/arm/mach-s3c/mach-smdk2413.c index f1f0ec174579..2b4e20aaa346 100644 --- a/arch/arm/mach-s3c/mach-smdk2413.c +++ b/arch/arm/mach-s3c/mach-smdk2413.c @@ -12,7 +12,7 @@ #include <linux/list.h> #include <linux/timer.h> #include <linux/init.h> -#include <linux/gpio.h> +#include <linux/gpio/machine.h> #include <linux/serial_core.h> #include <linux/serial_s3c.h> #include <linux/platform_device.h> @@ -74,9 +74,15 @@ static struct s3c2410_uartcfg smdk2413_uartcfgs[] __initdata = { static struct s3c2410_udc_mach_info smdk2413_udc_cfg __initdata = { - .pullup_pin = S3C2410_GPF(2), }; +static struct gpiod_lookup_table smdk2413_udc_gpio_table = { + .dev_id = "s3c2410-usbgadget", + .table = { + GPIO_LOOKUP("GPIOF", 2, "pullup", GPIO_ACTIVE_HIGH), + { }, + }, +}; static struct platform_device *smdk2413_devices[] __initdata = { &s3c_device_ohci, @@ -115,7 +121,7 @@ static void __init smdk2413_machine_init(void) S3C2410_MISCCR_USBSUSPND0 | S3C2410_MISCCR_USBSUSPND1, 0x0); - + gpiod_add_lookup_table(&smdk2413_udc_gpio_table); s3c24xx_udc_set_platdata(&smdk2413_udc_cfg); s3c_i2c0_set_platdata(NULL); /* Configure the I2S pins (GPE0...GPE4) in correct mode */ diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig index 7e0161cb1c1f..fb9cd10705de 100644 --- a/arch/arm/mach-sa1100/Kconfig +++ b/arch/arm/mach-sa1100/Kconfig @@ -1,7 +1,25 @@ # SPDX-License-Identifier: GPL-2.0-only -if ARCH_SA1100 +menuconfig ARCH_SA1100 + bool "SA11x0 Implementations" + depends on ARCH_MULTI_V4 && !(ARCH_MULTI_V4T || ARCH_MULTI_V5) + depends on !(ARCH_MOXART || ARCH_GEMINI) + depends on ATAGS + depends on CPU_LITTLE_ENDIAN + depends on MMU + select ARCH_NO_SG_CHAIN + select ARCH_MTD_XIP + select CLKSRC_MMIO + select CLKSRC_PXA + select CPU_FREQ + select CPU_SA1100 + select GPIOLIB + select IRQ_DOMAIN + select ISA + select NEED_MACH_MEMORY_H + help + Support for StrongARM 11x0 based boards. -menu "SA11x0 Implementations" +if ARCH_SA1100 config SA1100_ASSABET bool "Assabet" @@ -179,7 +197,4 @@ config SA1100_SSP This isn't for audio support, but for attached sensors and other devices, eg for BadgePAD 4 sensor support. -endmenu - endif - diff --git a/arch/arm/mach-sa1100/Makefile.boot b/arch/arm/mach-sa1100/Makefile.boot deleted file mode 100644 index 9d8246f2cab4..000000000000 --- a/arch/arm/mach-sa1100/Makefile.boot +++ /dev/null @@ -1,9 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -ifeq ($(CONFIG_SA1111),y) - zreladdr-y += 0xc0208000 -else - zreladdr-y += 0xc0008000 -endif -params_phys-y := 0xc0000100 -initrd_phys-y := 0xc0800000 - diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 50909c4b95b2..37f862f13c8d 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -6,5 +6,4 @@ menuconfig ARCH_RENESAS select GPIOLIB select NO_IOPORT_MAP select PINCTRL - select SOC_BUS select ZONE_DMA if ARM_LPAE diff --git a/arch/arm/mach-stm32/Makefile.boot b/arch/arm/mach-stm32/Makefile.boot deleted file mode 100644 index 5dde7328a7a9..000000000000 --- a/arch/arm/mach-stm32/Makefile.boot +++ /dev/null @@ -1,4 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -# Empty file waiting for deletion once Makefile.boot isn't needed any more. -# Patch waits for application at -# https://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=7889/1 . diff --git a/arch/arm/mach-sunplus/Kconfig b/arch/arm/mach-sunplus/Kconfig index 926cde5e3cd9..d0c2416e6f24 100644 --- a/arch/arm/mach-sunplus/Kconfig +++ b/arch/arm/mach-sunplus/Kconfig @@ -18,8 +18,8 @@ config SOC_SP7021 select ARM_PSCI select PINCTRL select PINCTRL_SPPCTL - select SERIAL_SUNPLUS - select SERIAL_SUNPLUS_CONSOLE + select SERIAL_SUNPLUS if TTY + select SERIAL_SUNPLUS_CONSOLE if TTY help Support for Sunplus SP7021 SoC. It is based on ARM 4-core Cortex-A7 with various peripherals (e.g.: I2C, SPI, SDIO, diff --git a/arch/arm/mach-versatile/Kconfig b/arch/arm/mach-versatile/Kconfig index 2ef226194c3a..b1519b4dc03a 100644 --- a/arch/arm/mach-versatile/Kconfig +++ b/arch/arm/mach-versatile/Kconfig @@ -256,7 +256,6 @@ menuconfig ARCH_VEXPRESS select GPIOLIB select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP - select HAVE_PATA_PLATFORM select CLK_ICST select NO_IOPORT_MAP select PLAT_VERSATILE diff --git a/arch/arm/mach-versatile/Makefile.boot b/arch/arm/mach-versatile/Makefile.boot deleted file mode 100644 index cec195d4fcba..000000000000 --- a/arch/arm/mach-versatile/Makefile.boot +++ /dev/null @@ -1,4 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -# Empty file waiting for deletion once Makefile.boot isn't needed any more. -# Patch waits for application at -# http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=7889/1 . diff --git a/arch/arm/mach-versatile/integrator_ap.c b/arch/arm/mach-versatile/integrator_ap.c index e216fac917d0..4bd6712e9f52 100644 --- a/arch/arm/mach-versatile/integrator_ap.c +++ b/arch/arm/mach-versatile/integrator_ap.c @@ -11,6 +11,7 @@ #include <linux/of_irq.h> #include <linux/of_address.h> #include <linux/of_platform.h> +#include <linux/uaccess.h> #include <linux/termios.h> #include <linux/mfd/syscon.h> #include <linux/regmap.h> diff --git a/arch/arm/mach-vt8500/Makefile.boot b/arch/arm/mach-vt8500/Makefile.boot deleted file mode 100644 index 883985f4b6c1..000000000000 --- a/arch/arm/mach-vt8500/Makefile.boot +++ /dev/null @@ -1,4 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only - zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x01000000 diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 089c9c644cce..ef691a5720d2 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -307,7 +307,7 @@ void __init dma_contiguous_remap(void) static int __dma_update_pte(pte_t *pte, unsigned long addr, void *data) { - struct page *page = virt_to_page(addr); + struct page *page = virt_to_page((void *)addr); pgprot_t prot = *(pgprot_t *)data; set_pte_ext(pte, mk_pte(page, prot), 0); diff --git a/arch/arm/mm/dump.c b/arch/arm/mm/dump.c index fb688003d156..059eb4cdc9c2 100644 --- a/arch/arm/mm/dump.c +++ b/arch/arm/mm/dump.c @@ -26,7 +26,7 @@ static struct addr_marker address_markers[] = { { MODULES_VADDR, "Modules" }, { PAGE_OFFSET, "Kernel Mapping" }, { 0, "vmalloc() Area" }, - { VMALLOC_END, "vmalloc() End" }, + { FDT_FIXED_BASE, "FDT Area" }, { FIXADDR_START, "Fixmap Area" }, { VECTORS_BASE, "Vectors" }, { VECTORS_BASE + PAGE_SIZE * 2, "Vectors End" }, @@ -200,6 +200,7 @@ static const struct prot_bits section_bits[] = { }; struct pg_level { + const char *name; const struct prot_bits *bits; size_t num; u64 mask; @@ -213,9 +214,11 @@ static struct pg_level pg_level[] = { }, { /* p4d */ }, { /* pud */ }, { /* pmd */ + .name = (CONFIG_PGTABLE_LEVELS > 2) ? "PMD" : "PGD", .bits = section_bits, .num = ARRAY_SIZE(section_bits), }, { /* pte */ + .name = "PTE", .bits = pte_bits, .num = ARRAY_SIZE(pte_bits), }, @@ -282,7 +285,8 @@ static void note_page(struct pg_state *st, unsigned long addr, delta >>= 10; unit++; } - pt_dump_seq_printf(st->seq, "%9lu%c", delta, *unit); + pt_dump_seq_printf(st->seq, "%9lu%c %s", delta, *unit, + pg_level[st->level].name); if (st->current_domain) pt_dump_seq_printf(st->seq, " %s", st->current_domain); @@ -346,7 +350,7 @@ static void walk_pmd(struct pg_state *st, pud_t *pud, unsigned long start) addr = start + i * PMD_SIZE; domain = get_domain_name(pmd); if (pmd_none(*pmd) || pmd_large(*pmd) || !pmd_present(*pmd)) - note_page(st, addr, 3, pmd_val(*pmd), domain); + note_page(st, addr, 4, pmd_val(*pmd), domain); else walk_pte(st, pmd, addr, domain); diff --git a/arch/arm/mm/kasan_init.c b/arch/arm/mm/kasan_init.c index 29caee9c79ce..46d9f4a622cb 100644 --- a/arch/arm/mm/kasan_init.c +++ b/arch/arm/mm/kasan_init.c @@ -268,12 +268,17 @@ void __init kasan_init(void) /* * 1. The module global variables are in MODULES_VADDR ~ MODULES_END, - * so we need to map this area. + * so we need to map this area if CONFIG_KASAN_VMALLOC=n. With + * VMALLOC support KASAN will manage this region dynamically, + * refer to kasan_populate_vmalloc() and ARM's implementation of + * module_alloc(). * 2. PKMAP_BASE ~ PKMAP_BASE+PMD_SIZE's shadow and MODULES_VADDR * ~ MODULES_END's shadow is in the same PMD_SIZE, so we can't * use kasan_populate_zero_shadow. */ - create_mapping((void *)MODULES_VADDR, (void *)(PKMAP_BASE + PMD_SIZE)); + if (!IS_ENABLED(CONFIG_KASAN_VMALLOC) && IS_ENABLED(CONFIG_MODULES)) + create_mapping((void *)MODULES_VADDR, (void *)(MODULES_END)); + create_mapping((void *)PKMAP_BASE, (void *)(PKMAP_BASE + PMD_SIZE)); /* * KAsan may reuse the contents of kasan_early_shadow_pte directly, so diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index a49f0b9c0f75..463fc2a8448f 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -300,7 +300,11 @@ static struct mem_type mem_types[] __ro_after_init = { .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | L_PTE_XN | L_PTE_RDONLY, .prot_l1 = PMD_TYPE_TABLE, +#ifdef CONFIG_ARM_LPAE + .prot_sect = PMD_TYPE_SECT | L_PMD_SECT_RDONLY | PMD_SECT_AP2, +#else .prot_sect = PMD_TYPE_SECT, +#endif .domain = DOMAIN_KERNEL, }, [MT_ROM] = { diff --git a/arch/arm/plat-orion/Makefile b/arch/arm/plat-orion/Makefile index 4e3f25de13c1..830b0be038c6 100644 --- a/arch/arm/plat-orion/Makefile +++ b/arch/arm/plat-orion/Makefile @@ -2,7 +2,7 @@ # # Makefile for the linux kernel. # -ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include +ccflags-y := -I$(srctree)/$(src)/include orion-gpio-$(CONFIG_GPIOLIB) += gpio.o obj-$(CONFIG_PLAT_ORION_LEGACY) += irq.o pcie.o time.o common.o mpp.o diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 9fb9fff08c94..fb8463c028b2 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -149,6 +149,7 @@ config ARM64 select HAVE_ARCH_AUDITSYSCALL select HAVE_ARCH_BITREVERSE select HAVE_ARCH_COMPILER_H + select HAVE_ARCH_HUGE_VMALLOC select HAVE_ARCH_HUGE_VMAP select HAVE_ARCH_JUMP_LABEL select HAVE_ARCH_JUMP_LABEL_RELATIVE @@ -194,7 +195,6 @@ config ARM64 select HAVE_IRQ_TIME_ACCOUNTING select HAVE_KVM select HAVE_NMI - select HAVE_PATA_PLATFORM select HAVE_PERF_EVENTS select HAVE_PERF_REGS select HAVE_PERF_USER_STACK_DUMP @@ -230,6 +230,7 @@ config ARM64 select HAVE_ARCH_USERFAULTFD_MINOR if USERFAULTFD select TRACE_IRQFLAGS_SUPPORT select TRACE_IRQFLAGS_NMI_SUPPORT + select HAVE_SOFTIRQ_ON_OWN_STACK help ARM 64-bit (AArch64) Linux support. @@ -733,6 +734,19 @@ config ARM64_ERRATUM_2077057 If unsure, say Y. +config ARM64_ERRATUM_2658417 + bool "Cortex-A510: 2658417: remove BF16 support due to incorrect result" + default y + help + This option adds the workaround for ARM Cortex-A510 erratum 2658417. + Affected Cortex-A510 (r0p0 to r1p1) may produce the wrong result for + BFMMLA or VMMLA instructions in rare circumstances when a pair of + A510 CPUs are using shared neon hardware. As the sharing is not + discoverable by the kernel, hide the BF16 HWCAP to indicate that + user-space should not be using these instructions. + + If unsure, say Y. + config ARM64_ERRATUM_2119858 bool "Cortex-A710/X2: 2119858: workaround TRBE overwriting trace data in FILL mode" default y @@ -1562,6 +1576,9 @@ config THUMB2_COMPAT_VDSO Compile the compat vDSO with '-mthumb -fomit-frame-pointer' if y, otherwise with '-marm'. +config COMPAT_ALIGNMENT_FIXUPS + bool "Fix up misaligned multi-word loads and stores in user space" + menuconfig ARMV8_DEPRECATED bool "Emulate deprecated/obsolete ARMv8 instructions" depends on SYSCTL @@ -1887,6 +1904,8 @@ config ARM64_BTI_KERNEL depends on CC_HAS_BRANCH_PROT_PAC_RET_BTI # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=94697 depends on !CC_IS_GCC || GCC_VERSION >= 100100 + # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=106671 + depends on !CC_IS_GCC # https://github.com/llvm/llvm-project/commit/a88c722e687e6780dcd6a58718350dc76fcc4cc9 depends on !CC_IS_CLANG || CLANG_VERSION >= 120000 depends on (!FUNCTION_GRAPH_TRACER || DYNAMIC_FTRACE_WITH_REGS) diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index 74e9e9de3759..76580b932e44 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -33,6 +33,11 @@ config ARCH_APPLE This enables support for Apple's in-house ARM SoC family, starting with the Apple M1. +menuconfig ARCH_BCM + bool "Broadcom SoC Support" + +if ARCH_BCM + config ARCH_BCM2835 bool "Broadcom BCM2835 family" select TIMER_OF @@ -47,15 +52,6 @@ config ARCH_BCM2835 This enables support for the Broadcom BCM2837 and BCM2711 SoC. These SoCs are used in the Raspberry Pi 3 and 4 devices. -config ARCH_BCM4908 - bool "Broadcom BCM4908 family" - select ARCH_BCMBCA - select GPIOLIB - help - This enables support for the Broadcom BCM4906, BCM4908 and - BCM49408 SoCs. These SoCs use Brahma-B53 cores and can be - found in home routers. - config ARCH_BCM_IPROC bool "Broadcom iProc SoC Family" select COMMON_CLK_IPROC @@ -66,6 +62,7 @@ config ARCH_BCM_IPROC config ARCH_BCMBCA bool "Broadcom Broadband Carrier Access (BCA) origin SoC" + select GPIOLIB help Say Y if you intend to run the kernel on a Broadcom Broadband ARM-based BCA chipset. @@ -73,6 +70,16 @@ config ARCH_BCMBCA This enables support for Broadcom BCA ARM-based broadband chipsets, including the DSL, PON and Wireless family of chips. +config ARCH_BRCMSTB + bool "Broadcom Set-Top-Box SoCs" + select ARCH_HAS_RESET_CONTROLLER + select GENERIC_IRQ_CHIP + select PINCTRL + help + This enables support for Broadcom's ARMv8 Set Top Box SoCs + +endif + config ARCH_BERLIN bool "Marvell Berlin SoC Family" select DW_APB_ICTL @@ -87,14 +94,6 @@ config ARCH_BITMAIN help This enables support for the Bitmain SoC Family. -config ARCH_BRCMSTB - bool "Broadcom Set-Top-Box SoCs" - select ARCH_HAS_RESET_CONTROLLER - select GENERIC_IRQ_CHIP - select PINCTRL - help - This enables support for Broadcom's ARMv8 Set Top Box SoCs - config ARCH_EXYNOS bool "ARMv8 based Samsung Exynos SoC family" select COMMON_CLK_SAMSUNG @@ -136,12 +135,6 @@ config ARCH_K3 This enables support for Texas Instruments' K3 multicore SoC architecture. -config ARCH_LAYERSCAPE - bool "ARMv8 based Freescale Layerscape SoC family" - select EDAC_SUPPORT - help - This enables support for the Freescale Layerscape SoC family. - config ARCH_LG1K bool "LG Electronics LG1K SoC Family" help @@ -200,6 +193,17 @@ config ARCH_MVEBU - Armada 8K SoC Family - 98DX2530 SoC Family +menuconfig ARCH_NXP + bool "NXP SoC support" + +if ARCH_NXP + +config ARCH_LAYERSCAPE + bool "ARMv8 based Freescale Layerscape SoC family" + select EDAC_SUPPORT + help + This enables support for the Freescale Layerscape SoC family. + config ARCH_MXC bool "ARMv8 based NXP i.MX SoC family" select ARM64_ERRATUM_843419 @@ -214,6 +218,13 @@ config ARCH_MXC This enables support for the ARMv8 based SoCs in the NXP i.MX family. +config ARCH_S32 + bool "NXP S32 SoC Family" + help + This enables support for the NXP S32 family of processors. + +endif + config ARCH_NPCM bool "Nuvoton NPCM Architecture" select PINCTRL @@ -243,7 +254,6 @@ config ARCH_RENESAS bool "Renesas SoC Platforms" select GPIOLIB select PINCTRL - select SOC_BUS help This enables support for the ARMv8 based Renesas SoCs. @@ -257,11 +267,6 @@ config ARCH_ROCKCHIP This enables support for the ARMv8 based Rockchip chipsets, like the RK3368. -config ARCH_S32 - bool "NXP S32 SoC Family" - help - This enables support for the NXP S32 family of processors. - config ARCH_SEATTLE bool "AMD Seattle SoC Family" help diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi index 548539c93ab0..97e3e6907acd 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi @@ -101,6 +101,18 @@ #reset-cells = <1>; }; + dma: dma-controller@3002000 { + compatible = "allwinner,sun50i-a100-dma"; + reg = <0x03002000 0x1000>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>; + clock-names = "bus", "mbus"; + resets = <&ccu RST_BUS_DMA>; + dma-channels = <8>; + dma-requests = <52>; + #dma-cells = <1>; + }; + gic: interrupt-controller@3021000 { compatible = "arm,gic-400"; reg = <0x03021000 0x1000>, <0x03022000 0x2000>, @@ -209,6 +221,8 @@ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_I2C0>; resets = <&ccu RST_BUS_I2C0>; + dmas = <&dma 43>, <&dma 43>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -222,6 +236,8 @@ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_I2C1>; resets = <&ccu RST_BUS_I2C1>; + dmas = <&dma 44>, <&dma 44>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -235,6 +251,8 @@ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_I2C2>; resets = <&ccu RST_BUS_I2C2>; + dmas = <&dma 45>, <&dma 45>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -248,6 +266,8 @@ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_I2C3>; resets = <&ccu RST_BUS_I2C3>; + dmas = <&dma 46>, <&dma 46>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -325,6 +345,8 @@ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; clocks = <&r_ccu CLK_R_APB2_I2C0>; resets = <&r_ccu RST_R_APB2_I2C0>; + dmas = <&dma 50>, <&dma 50>; + dma-names = "rx", "tx"; pinctrl-names = "default"; pinctrl-0 = <&r_i2c0_pins>; status = "disabled"; @@ -340,6 +362,8 @@ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; clocks = <&r_ccu CLK_R_APB2_I2C1>; resets = <&r_ccu RST_R_APB2_I2C1>; + dmas = <&dma 51>, <&dma 51>; + dma-names = "rx", "tx"; pinctrl-names = "default"; pinctrl-0 = <&r_i2c1_pins>; status = "disabled"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts index 6249e9e02928..9ec49ac2f6fd 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts @@ -5,6 +5,7 @@ #include "sun50i-h6.dtsi" #include "sun50i-h6-cpu-opp.dtsi" +#include "sun50i-h6-gpu-opp.dtsi" #include <dt-bindings/gpio/gpio.h> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-gpu-opp.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-gpu-opp.dtsi new file mode 100644 index 000000000000..b48049c4fc85 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-gpu-opp.dtsi @@ -0,0 +1,87 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2022 Clément Péron <peron.clem@gmail.com> + +/ { + gpu_opp_table: opp-table-gpu { + compatible = "operating-points-v2"; + + opp-216000000 { + opp-hz = /bits/ 64 <216000000>; + opp-microvolt = <810000 810000 1200000>; + }; + + opp-264000000 { + opp-hz = /bits/ 64 <264000000>; + opp-microvolt = <810000 810000 1200000>; + }; + + opp-312000000 { + opp-hz = /bits/ 64 <312000000>; + opp-microvolt = <810000 810000 1200000>; + }; + + opp-336000000 { + opp-hz = /bits/ 64 <336000000>; + opp-microvolt = <810000 810000 1200000>; + }; + + opp-360000000 { + opp-hz = /bits/ 64 <360000000>; + opp-microvolt = <820000 820000 1200000>; + }; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + opp-microvolt = <830000 830000 1200000>; + }; + + opp-408000000 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <840000 840000 1200000>; + }; + + opp-420000000 { + opp-hz = /bits/ 64 <420000000>; + opp-microvolt = <850000 850000 1200000>; + }; + + opp-432000000 { + opp-hz = /bits/ 64 <432000000>; + opp-microvolt = <860000 860000 1200000>; + }; + + opp-456000000 { + opp-hz = /bits/ 64 <456000000>; + opp-microvolt = <870000 870000 1200000>; + }; + + opp-504000000 { + opp-hz = /bits/ 64 <504000000>; + opp-microvolt = <890000 890000 1200000>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + opp-microvolt = <910000 910000 1200000>; + }; + + opp-576000000 { + opp-hz = /bits/ 64 <576000000>; + opp-microvolt = <930000 930000 1200000>; + }; + + opp-624000000 { + opp-hz = /bits/ 64 <624000000>; + opp-microvolt = <950000 950000 1200000>; + }; + + opp-756000000 { + opp-hz = /bits/ 64 <756000000>; + opp-microvolt = <1040000 1040000 1200000>; + }; + }; +}; + +&gpu { + operating-points-v2 = <&gpu_opp_table>; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi index 5a28303d3d4c..53f6660656ac 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi @@ -186,6 +186,7 @@ clocks = <&ccu CLK_GPU>, <&ccu CLK_BUS_GPU>; clock-names = "core", "bus"; resets = <&ccu RST_BUS_GPU>; + #cooling-cells = <2>; status = "disabled"; }; @@ -1072,9 +1073,55 @@ }; gpu-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; + polling-delay-passive = <1000>; + polling-delay = <2000>; thermal-sensors = <&ths 1>; + + trips { + gpu_alert0: gpu-alert-0 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpu_alert1: gpu-alert-1 { + temperature = <100000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpu_alert2: gpu-alert-2 { + temperature = <105000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpu-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + // Forbid the GPU to go over 756MHz + map0 { + trip = <&gpu_alert0>; + cooling-device = <&gpu 1 THERMAL_NO_LIMIT>; + }; + + // Forbid the GPU to go over 624MHz + map1 { + trip = <&gpu_alert1>; + cooling-device = <&gpu 2 THERMAL_NO_LIMIT>; + }; + + // Forbid the GPU to go over 576MHz + map2 { + trip = <&gpu_alert2>; + cooling-device = <&gpu 3 THERMAL_NO_LIMIT>; + }; + }; }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index 8773211df50e..e213aeebb774 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -1,6 +1,8 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j100.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-2.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-3.dtb dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-radxa-zero.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb @@ -43,6 +45,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc-v2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxm-gt1-ultimate.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-mecool-kiii-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-minix-neo-u9h.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts index 8b0d586aa84e..b2d6ba660914 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts +++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts @@ -1,270 +1,29 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* - * Copyright (c) 2021 Vyacheslav Bocharov <adeep@lexina.in> - * Copyright (c) 2020 JetHome - * Author: Aleksandr Kazantsev <ak@tvip.ru> - * Author: Alexey Shevelkin <ash@tvip.ru> + * Copyright (c) 2022 Vyacheslav Bocharov <adeep@lexina.in> + * Copyright (c) 2022 JetHome * Author: Vyacheslav Bocharov <adeep@lexina.in> */ /dts-v1/; -#include "meson-axg.dtsi" -#include <dt-bindings/input/input.h> -#include <dt-bindings/thermal/thermal.h> +#include "meson-axg-jethome-jethub-j1xx.dtsi" / { compatible = "jethome,jethub-j100", "amlogic,a113d", "amlogic,meson-axg"; - model = "JetHome JetHub J100"; - aliases { - serial0 = &uart_AO; /* Console */ - serial2 = &uart_AO_B; /* External UART (Wireless Module) */ - ethernet0 = ðmac; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; + model = "JetHome JetHub D1 (J100)"; /* 1024MB RAM */ memory@0 { device_type = "memory"; reg = <0x0 0x0 0x0 0x40000000>; }; - - reserved-memory { - linux,cma { - size = <0x0 0x400000>; - }; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; - }; - - vcc_3v3: regulator-vcc_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - vcc_5v: regulator-vcc_5v { - compatible = "regulator-fixed"; - regulator-name = "VCC5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - vddao_3v3: regulator-vddao_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc_5v>; - regulator-always-on; - }; - - vddio_ao18: regulator-vddio_ao18 { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_AO18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - vddio_boot: regulator-vddio_boot { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_BOOT"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - vccq_1v8: regulator-vccq_1v8 { - compatible = "regulator-fixed"; - regulator-name = "VCCQ_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - usb_pwr: regulator-usb_pwr { - compatible = "regulator-fixed"; - regulator-name = "USB_PWR"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc_5v>; - regulator-always-on; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>; - clocks = <&wifi32k>; - clock-names = "ext_clock"; - }; - - wifi32k: wifi32k { - compatible = "pwm-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */ - }; - - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - thermal-sensors = <&scpi_sensors 0>; - trips { - cpu_passive: cpu-passive { - temperature = <70000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "passive"; - }; - - cpu_hot: cpu-hot { - temperature = <80000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "hot"; - }; - - cpu_critical: cpu-critical { - temperature = <100000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "critical"; - }; - }; - - cpu_cooling_maps: cooling-maps { - map0 { - trip = <&cpu_passive>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - - map1 { - trip = <&cpu_hot>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - }; - - onewire { - compatible = "w1-gpio"; - gpios = <&gpio GPIOA_14 GPIO_ACTIVE_HIGH>; - #gpio-cells = <1>; - }; -}; - -&efuse { - sn: sn@32 { - reg = <0x32 0x20>; - }; - - eth_mac: eth_mac@0 { - reg = <0x0 0x6>; - }; - - bt_mac: bt_mac@6 { - reg = <0x6 0x6>; - }; - - wifi_mac: wifi_mac@c { - reg = <0xc 0x6>; - }; - - bid: bid@12 { - reg = <0x12 0x20>; - }; -}; - -ðmac { - status = "okay"; - pinctrl-0 = <ð_rmii_x_pins>; - pinctrl-names = "default"; - phy-handle = <ð_phy0>; - phy-mode = "rmii"; - - mdio { - compatible = "snps,dwmac-mdio"; - #address-cells = <1>; - #size-cells = <0>; - - /* ICPlus IP101A/G Ethernet PHY (vendor_id=0x0243, model_id=0x0c54) */ - eth_phy0: ethernet-phy@0 { - /* compatible = "ethernet-phy-id0243.0c54";*/ - max-speed = <100>; - reg = <0>; - - reset-assert-us = <10000>; - reset-deassert-us = <10000>; - reset-gpios = <&gpio GPIOZ_5 GPIO_ACTIVE_LOW>; - }; - }; -}; - -/* Internal I2C bus (on CPU module) */ -&i2c1 { - status = "okay"; - pinctrl-0 = <&i2c1_z_pins>; - pinctrl-names = "default"; - - /* RTC */ - pcf8563: pcf8563@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - status = "okay"; - }; }; -/* Peripheral I2C bus (on motherboard) */ -&i2c_AO { - status = "okay"; - pinctrl-0 = <&i2c_ao_sck_10_pins>, <&i2c_ao_sda_11_pins>; - pinctrl-names = "default"; -}; - -&pwm_ab { - status = "okay"; - pinctrl-0 = <&pwm_a_x20_pins>; - pinctrl-names = "default"; -}; /* wifi module */ &sd_emmc_b { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - pinctrl-0 = <&sdio_pins>; - pinctrl-1 = <&sdio_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <50000000>; non-removable; - disable-wp; - - mmc-pwrseq = <&sdio_pwrseq>; - - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&vddio_boot>; brcmf: wifi@1 { reg = <1>; @@ -272,99 +31,10 @@ }; }; -/* emmc storage */ -&sd_emmc_c { - status = "okay"; - pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - max-frequency = <200000000>; - non-removable; - disable-wp; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - - mmc-pwrseq = <&emmc_pwrseq>; - - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&vccq_1v8>; -}; - /* UART Bluetooth */ &uart_B { - status = "okay"; - pinctrl-0 = <&uart_b_z_pins>, <&uart_b_z_cts_rts_pins>; - pinctrl-names = "default"; - uart-has-rtscts; - bluetooth { compatible = "brcm,bcm43438-bt"; shutdown-gpios = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>; }; }; - -/* UART Console */ -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -/* UART Wireless module */ -&uart_AO_B { - status = "okay"; - pinctrl-0 = <&uart_ao_b_pins>; - pinctrl-names = "default"; -}; - -&usb { - status = "okay"; - phy-supply = <&usb_pwr>; -}; - -&spicc1 { - status = "okay"; - pinctrl-0 = <&spi1_x_pins>, <&spi1_ss0_x_pins>; - pinctrl-names = "default"; -}; - -&gpio { - gpio-line-names = - "", "", "", "", "", // 0 - 4 - "", "", "", "", "", // 5 - 9 - "UserButton", "", "", "", "", // 10 - 14 - "", "", "", "", "", // 15 - 19 - "", "", "", "", "", // 20 - 24 - "", "LedRed", "LedGreen", "Output3", "Output2", // 25 - 29 - "Output1", "", "", "", "", // 30 - 34 - "", "ZigBeeBOOT", "", "", "", // 35 - 39 - "1Wire", "ZigBeeRESET", "", "Input4", "Input3", // 40 - 44 - "Input2", "Input1", "", "", "", // 45 - 49 - "", "", "", "", "", // 50 - 54 - "", "", "", "", "", // 55 - 59 - "", "", "", "", "", // 60 - 64 - "", "", "", "", "", // 65 - 69 - "", "", "", "", "", // 70 - 74 - "", "", "", "", "", // 75 - 79 - "", "", "", "", "", // 80 - 84 - "", ""; // 85-86 -}; - -&cpu0 { - #cooling-cells = <2>; -}; - -&cpu1 { - #cooling-cells = <2>; -}; - -&cpu2 { - #cooling-cells = <2>; -}; - -&cpu3 { - #cooling-cells = <2>; -}; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts new file mode 100644 index 000000000000..0062667c4f65 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2022 Vyacheslav Bocharov <adeep@lexina.in> + * Copyright (c) 2022 JetHome + * Author: Vyacheslav Bocharov <adeep@lexina.in> + */ + +/dts-v1/; + +#include "meson-axg-jethome-jethub-j1xx.dtsi" + +/ { + compatible = "jethome,jethub-j110", "amlogic,a113d", "amlogic,meson-axg"; + model = "JetHome JetHub D1p (J110) HW rev.2"; + + /* 2GiB or 4GiB RAM */ + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; +}; + + +/* wifi module */ +&sd_emmc_b { + broken-cd;/* cd-gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;*/ +}; + +/* UART Bluetooth */ +&uart_B { + bluetooth { + compatible = "realtek,rtl8822cs-bt"; + enable-gpios = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>; + host-wake-gpios = <&gpio GPIOZ_8 GPIO_ACTIVE_HIGH>; + device-wake-gpios = <&gpio GPIOZ_6 GPIO_ACTIVE_HIGH>; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts new file mode 100644 index 000000000000..c2d22b00c1cd --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2022 Vyacheslav Bocharov <adeep@lexina.in> + * Copyright (c) 2022 JetHome + * Author: Vyacheslav Bocharov <adeep@lexina.in> + */ + +/dts-v1/; + +#include "meson-axg-jethome-jethub-j1xx.dtsi" + +/ { + compatible = "jethome,jethub-j110", "amlogic,a113d", "amlogic,meson-axg"; + model = "JetHome JetHub D1p (J110) Hw rev.3"; + + /* 2GiB or 4GiB RAM */ + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; +}; + + +/* wifi module */ +&sd_emmc_b { + broken-cd;/* cd-gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;*/ +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi new file mode 100644 index 000000000000..5836b0030931 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi @@ -0,0 +1,351 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2022 Vyacheslav Bocharov <adeep@lexina.in> + * Copyright (c) 2022 JetHome + * Author: Vyacheslav Bocharov <adeep@lexina.in> + * Author: Aleksandr Kazantsev <ak@tvip.ru> + * Author: Alexey Shevelkin <ash@tvip.ru> + */ + +/dts-v1/; + +#include "meson-axg.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + aliases { + serial0 = &uart_AO; /* Console */ + serial2 = &uart_AO_B; /* External UART (Wireless Module) */ + ethernet0 = ðmac; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reserved-memory { + linux,cma { + size = <0x0 0x400000>; + }; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vcc_5v: regulator-vcc_5v { + compatible = "regulator-fixed"; + regulator-name = "VCC5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_5v>; + regulator-always-on; + }; + + vddio_ao18: regulator-vddio_ao18 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vddio_boot: regulator-vddio_boot { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vccq_1v8: regulator-vccq_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCCQ_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + usb_pwr: regulator-usb_pwr { + compatible = "regulator-fixed"; + regulator-name = "USB_PWR"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v>; + regulator-always-on; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */ + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&scpi_sensors 0>; + trips { + cpu_passive: cpu-passive { + temperature = <70000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + + cpu_hot: cpu-hot { + temperature = <80000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "hot"; + }; + + cpu_critical: cpu-critical { + temperature = <100000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + + cpu_cooling_maps: cooling-maps { + map0 { + trip = <&cpu_passive>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + + map1 { + trip = <&cpu_hot>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + + onewire { + compatible = "w1-gpio"; + gpios = <&gpio GPIOA_14 GPIO_ACTIVE_HIGH>; + #gpio-cells = <1>; + }; +}; + +&efuse { + sn: sn@32 { + reg = <0x32 0x20>; + }; + + eth_mac: eth_mac@0 { + reg = <0x0 0x6>; + }; + + bt_mac: bt_mac@6 { + reg = <0x6 0x6>; + }; + + wifi_mac: wifi_mac@c { + reg = <0xc 0x6>; + }; + + bid: bid@12 { + reg = <0x12 0x20>; + }; +}; + +ðmac { + status = "okay"; + pinctrl-0 = <ð_rmii_x_pins>; + pinctrl-names = "default"; + phy-handle = <ð_phy0>; + phy-mode = "rmii"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + /* ICPlus IP101A/G Ethernet PHY (vendor_id=0x0243, model_id=0x0c54) */ + eth_phy0: ethernet-phy@0 { + /* compatible = "ethernet-phy-id0243.0c54";*/ + max-speed = <100>; + reg = <0>; + + reset-assert-us = <10000>; + reset-deassert-us = <10000>; + reset-gpios = <&gpio GPIOZ_5 GPIO_ACTIVE_LOW>; + }; + }; +}; + +/* Internal I2C bus (on CPU module) */ +&i2c1 { + status = "okay"; + pinctrl-0 = <&i2c1_z_pins>; + pinctrl-names = "default"; + + /* RTC */ + pcf8563: pcf8563@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + status = "okay"; + }; +}; + +/* Peripheral I2C bus (on motherboard) */ +&i2c_AO { + status = "okay"; + pinctrl-0 = <&i2c_ao_sck_10_pins>, <&i2c_ao_sda_11_pins>; + pinctrl-names = "default"; +}; + +&pwm_ab { + status = "okay"; + pinctrl-0 = <&pwm_a_x20_pins>; + pinctrl-names = "default"; +}; + +/* wifi module */ +&sd_emmc_b { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +/* emmc storage */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + max-frequency = <200000000>; + non-removable; + disable-wp; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + + mmc-pwrseq = <&emmc_pwrseq>; + + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vccq_1v8>; +}; + +/* UART Bluetooth */ +&uart_B { + status = "okay"; + pinctrl-0 = <&uart_b_z_pins>, <&uart_b_z_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; +}; + +/* UART Console */ +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +/* UART Wireless module */ +&uart_AO_B { + status = "okay"; + pinctrl-0 = <&uart_ao_b_pins>; + pinctrl-names = "default"; +}; + +&usb { + status = "okay"; + phy-supply = <&usb_pwr>; +}; + +&spicc1 { + status = "okay"; + pinctrl-0 = <&spi1_x_pins>, <&spi1_ss0_x_pins>; + pinctrl-names = "default"; +}; + +&gpio { + gpio-line-names = + "", "", "", "", "", // 0 - 4 + "", "", "", "", "", // 5 - 9 + "UserButton", "", "", "", "", // 10 - 14 + "", "", "", "", "", // 15 - 19 + "", "", "", "", "", // 20 - 24 + "", "LedRed", "LedGreen", "Output3", "Output2", // 25 - 29 + "Output1", "", "", "", "", // 30 - 34 + "", "ZigBeeBOOT", "", "", "", // 35 - 39 + "1Wire", "ZigBeeRESET", "", "Input4", "Input3", // 40 - 44 + "Input2", "Input1", "", "", "", // 45 - 49 + "", "", "", "", "", // 50 - 54 + "", "", "", "", "", // 55 - 59 + "", "", "", "", "", // 60 - 64 + "", "", "", "", "", // 65 - 69 + "", "", "", "", "", // 70 - 74 + "", "", "", "", "", // 75 - 79 + "", "", "", "", "", // 80 - 84 + "", ""; // 85-86 +}; + +&cpu0 { + #cooling-cells = <2>; +}; + +&cpu1 { + #cooling-cells = <2>; +}; + +&cpu2 { + #cooling-cells = <2>; +}; + +&cpu3 { + #cooling-cells = <2>; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts index b4e86196e346..b2bb94981838 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts @@ -111,7 +111,6 @@ vin-supply = <&dc_in>; gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; - enable-active-low; }; vddao_1v8: regulator-vddao_1v8 { diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-gt1-ultimate.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-gt1-ultimate.dts new file mode 100644 index 000000000000..2c267884cc16 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-gt1-ultimate.dts @@ -0,0 +1,91 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) Christian Hewitt <christianshewitt@gmail.com> + */ + +/dts-v1/; + +#include "meson-gxm.dtsi" +#include "meson-gx-p23x-q20x.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +/ { + compatible = "azw,gt1-ultimate", "amlogic,s912", "amlogic,meson-gxm"; + model = "Beelink GT1 Ultimate"; + + leds { + compatible = "gpio-leds"; + + led-white { + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_POWER; + gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>; + default-state = "on"; + panic-indicator; + }; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1710000>; + + button-function { + label = "update"; + linux,code = <KEY_VENDOR>; + press-threshold-microvolt = <10000>; + }; + }; +}; + +ðmac { + pinctrl-0 = <ð_pins>; + pinctrl-names = "default"; + phy-handle = <&external_phy>; + amlogic,tx-delay-ns = <2>; + phy-mode = "rgmii"; +}; + +&external_mdio { + external_phy: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + max-speed = <1000>; + + reset-assert-us = <10000>; + reset-deassert-us = <80000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_15 */ + interrupts = <25 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&ir { + linux,rc-map-name = "rc-beelink-gs1"; +}; + +&sd_emmc_a { + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts index 603337ca5608..9068a334ea57 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts @@ -171,7 +171,6 @@ regulator-max-microvolt = <3300000>; vin-supply = <&vddao_3v3>; gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; - enable-active-low; regulator-always-on; }; diff --git a/arch/arm64/boot/dts/apple/t8103-j274.dts b/arch/arm64/boot/dts/apple/t8103-j274.dts index 2cd429efba5b..c1f3ba9c39f6 100644 --- a/arch/arm64/boot/dts/apple/t8103-j274.dts +++ b/arch/arm64/boot/dts/apple/t8103-j274.dts @@ -21,6 +21,10 @@ }; }; +&wifi0 { + brcm,board-type = "apple,atlantisb"; +}; + /* * Force the bus number assignments so that we can declare some of the * on-board devices and properties that are populated by the bootloader diff --git a/arch/arm64/boot/dts/apple/t8103-j293.dts b/arch/arm64/boot/dts/apple/t8103-j293.dts index 49cdf4b560a3..ecb10d237a05 100644 --- a/arch/arm64/boot/dts/apple/t8103-j293.dts +++ b/arch/arm64/boot/dts/apple/t8103-j293.dts @@ -17,6 +17,10 @@ model = "Apple MacBook Pro (13-inch, M1, 2020)"; }; +&wifi0 { + brcm,board-type = "apple,honshu"; +}; + /* * Remove unused PCIe ports and disable the associated DARTs. */ diff --git a/arch/arm64/boot/dts/apple/t8103-j313.dts b/arch/arm64/boot/dts/apple/t8103-j313.dts index b0ebb45bdb6f..df741737b8e6 100644 --- a/arch/arm64/boot/dts/apple/t8103-j313.dts +++ b/arch/arm64/boot/dts/apple/t8103-j313.dts @@ -17,6 +17,10 @@ model = "Apple MacBook Air (M1, 2020)"; }; +&wifi0 { + brcm,board-type = "apple,shikoku"; +}; + /* * Remove unused PCIe ports and disable the associated DARTs. */ diff --git a/arch/arm64/boot/dts/apple/t8103-j456.dts b/arch/arm64/boot/dts/apple/t8103-j456.dts index 884fddf7d363..8c6bf9592510 100644 --- a/arch/arm64/boot/dts/apple/t8103-j456.dts +++ b/arch/arm64/boot/dts/apple/t8103-j456.dts @@ -21,6 +21,10 @@ }; }; +&wifi0 { + brcm,board-type = "apple,capri"; +}; + &i2c0 { hpm2: usb-pd@3b { compatible = "apple,cd321x"; diff --git a/arch/arm64/boot/dts/apple/t8103-j457.dts b/arch/arm64/boot/dts/apple/t8103-j457.dts index d7c622931627..fe7c0aaf7d62 100644 --- a/arch/arm64/boot/dts/apple/t8103-j457.dts +++ b/arch/arm64/boot/dts/apple/t8103-j457.dts @@ -21,6 +21,10 @@ }; }; +&wifi0 { + brcm,board-type = "apple,santorini"; +}; + /* * Force the bus number assignments so that we can declare some of the * on-board devices and properties that are populated by the bootloader diff --git a/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi b/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi index fe2ae40fa9dd..3d15b8e2a6c1 100644 --- a/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi +++ b/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi @@ -71,8 +71,10 @@ &port00 { bus-range = <1 1>; wifi0: network@0,0 { + compatible = "pci14e4,4425"; reg = <0x10000 0x0 0x0 0x0 0x0>; /* To be filled by the loader */ local-mac-address = [00 00 00 00 00 00]; + apple,antenna-sku = "XX"; }; }; diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index 8d0d45d168d1..2f27619d8abd 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -26,7 +26,8 @@ compatible = "arm,mhu", "arm,primecell"; reg = <0x0 0x2b1f0000 0x0 0x1000>; interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; #mbox-cells = <1>; clocks = <&soc_refclk100mhz>; clock-names = "apb_pclk"; diff --git a/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi b/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi index ba88d1596f6f..09d2b692e9e1 100644 --- a/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi +++ b/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi @@ -67,7 +67,6 @@ port@0 { reg = <0>; csys2_funnel_in_port0: endpoint { - slave-mode; remote-endpoint = <&etf0_out_port>; }; }; @@ -75,7 +74,6 @@ port@1 { reg = <1>; csys2_funnel_in_port1: endpoint { - slave-mode; remote-endpoint = <&etf1_out_port>; }; }; diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile index e8584d3b698f..05d8c5ecf3b0 100644 --- a/arch/arm64/boot/dts/broadcom/Makefile +++ b/arch/arm64/boot/dts/broadcom/Makefile @@ -8,7 +8,6 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-400.dtb \ bcm2837-rpi-cm3-io3.dtb \ bcm2837-rpi-zero-2-w.dtb -subdir-y += bcm4908 subdir-y += bcmbca subdir-y += northstar2 subdir-y += stingray diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/Makefile b/arch/arm64/boot/dts/broadcom/bcm4908/Makefile deleted file mode 100644 index 6e364e304d4f..000000000000 --- a/arch/arm64/boot/dts/broadcom/bcm4908/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-netgear-r8000p.dtb -dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-tplink-archer-c2300-v1.dtb -dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-asus-gt-ac5300.dtb -dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-netgear-raxe500.dtb diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile index 38f14307184b..27741b71ba9e 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile +++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile @@ -1,5 +1,10 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_BCMBCA) += \ + bcm4906-netgear-r8000p.dtb \ + bcm4906-tplink-archer-c2300-v1.dtb \ + bcm4908-asus-gt-ac5300.dtb \ + bcm4908-netgear-raxe500.dtb \ + bcm94908.dtb \ bcm4912-asus-gt-ax6000.dtb \ bcm94912.dtb \ bcm963158.dtb \ diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts index 2dd028438c22..d8b60575eb4f 100644 --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts @@ -7,7 +7,7 @@ #include "bcm4906.dtsi" / { - compatible = "netgear,r8000p", "brcm,bcm4906", "brcm,bcm4908"; + compatible = "netgear,r8000p", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca"; model = "Netgear R8000P"; memory@0 { diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts index 064f7f549665..296393d4aaab 100644 --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts @@ -7,7 +7,7 @@ #include "bcm4906.dtsi" / { - compatible = "tplink,archer-c2300-v1", "brcm,bcm4906", "brcm,bcm4908"; + compatible = "tplink,archer-c2300-v1", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca"; model = "TP-Link Archer C2300 V1"; memory@0 { diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906.dtsi index d084c33d5ca8..d084c33d5ca8 100644 --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906.dtsi diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts index 04f8524b5335..839ca33178b0 100644 --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts @@ -2,11 +2,12 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> #include "bcm4908.dtsi" / { - compatible = "asus,gt-ac5300", "brcm,bcm4908"; + compatible = "asus,gt-ac5300", "brcm,bcm4908", "brcm,bcmbca"; model = "Asus GT-AC5300"; memory@0 { @@ -118,6 +119,53 @@ }; }; +&leds { + led-power@11 { + reg = <0x11>; + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_WHITE>; + default-state = "on"; + active-low; + pinctrl-names = "default"; + pinctrl-0 = <&pins_led_17_a>; + }; + + led-wan-red@12 { + reg = <0x12>; + function = LED_FUNCTION_WAN; + color = <LED_COLOR_ID_RED>; + active-low; + pinctrl-names = "default"; + pinctrl-0 = <&pins_led_18_a>; + }; + + led-wps@14 { + reg = <0x14>; + function = LED_FUNCTION_WPS; + color = <LED_COLOR_ID_WHITE>; + active-low; + pinctrl-names = "default"; + pinctrl-0 = <&pins_led_20_a>; + }; + + led-wan-white@15 { + reg = <0x15>; + function = LED_FUNCTION_WAN; + color = <LED_COLOR_ID_WHITE>; + active-low; + pinctrl-names = "default"; + pinctrl-0 = <&pins_led_21_a>; + }; + + led-lan@19 { + reg = <0x19>; + function = LED_FUNCTION_LAN; + color = <LED_COLOR_ID_WHITE>; + pinctrl-names = "default"; + pinctrl-0 = <&pins_led_25_a>; + }; +}; + &nandcs { nand-ecc-strength = <4>; nand-ecc-step-size = <512>; diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-netgear-raxe500.dts index 3c2cf2d238b6..23b96c663239 100644 --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-netgear-raxe500.dts @@ -3,7 +3,7 @@ #include "bcm4908.dtsi" / { - compatible = "netgear,raxe500", "brcm,bcm4908"; + compatible = "netgear,raxe500", "brcm,bcm4908", "brcm,bcmbca"; model = "Netgear RAXE500"; memory@0 { diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi index 967d2cd3c3ce..dac9d3b4e91d 100644 --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi @@ -352,6 +352,61 @@ groups = "led_9_grp_a"; }; + pins_led_10_a: led_10-a-pins { + function = "led_10"; + groups = "led_10_grp_a"; + }; + + pins_led_11_a: led_11-a-pins { + function = "led_11"; + groups = "led_11_grp_a"; + }; + + pins_led_12_a: led_12-a-pins { + function = "led_12"; + groups = "led_12_grp_a"; + }; + + pins_led_13_a: led_13-a-pins { + function = "led_13"; + groups = "led_13_grp_a"; + }; + + pins_led_14_a: led_14-a-pins { + function = "led_14"; + groups = "led_14_grp_a"; + }; + + pins_led_15_a: led_15-a-pins { + function = "led_15"; + groups = "led_15_grp_a"; + }; + + pins_led_16_a: led_16-a-pins { + function = "led_16"; + groups = "led_16_grp_a"; + }; + + pins_led_17_a: led_17-a-pins { + function = "led_17"; + groups = "led_17_grp_a"; + }; + + pins_led_18_a: led_18-a-pins { + function = "led_18"; + groups = "led_18_grp_a"; + }; + + pins_led_19_a: led_19-a-pins { + function = "led_19"; + groups = "led_19_grp_a"; + }; + + pins_led_20_a: led_20-a-pins { + function = "led_20"; + groups = "led_20_grp_a"; + }; + pins_led_21_a: led_21-a-pins { function = "led_21"; groups = "led_21_grp_a"; @@ -362,6 +417,21 @@ groups = "led_22_grp_a"; }; + pins_led_23_a: led_23-a-pins { + function = "led_23"; + groups = "led_23_grp_a"; + }; + + pins_led_24_a: led_24-a-pins { + function = "led_24"; + groups = "led_24_grp_a"; + }; + + pins_led_25_a: led_25-a-pins { + function = "led_25"; + groups = "led_25_grp_a"; + }; + pins_led_26_a: led_26-a-pins { function = "led_26"; groups = "led_26_grp_a"; @@ -387,6 +457,11 @@ groups = "led_30_grp_a"; }; + pins_led_31_a: led_31-a-pins { + function = "led_31"; + groups = "led_31_grp_a"; + }; + pins_hs_uart: hs_uart-pins { function = "hs_uart"; groups = "hs_uart_grp"; @@ -442,6 +517,14 @@ status = "okay"; }; + leds: leds@800 { + compatible = "brcm,bcm4908-leds", "brcm,bcm63138-leds"; + reg = <0x800 0xdc>; + + #address-cells = <1>; + #size-cells = <0>; + }; + nand-controller@1800 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts new file mode 100644 index 000000000000..fcbd3c430ace --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm4908.dtsi" + +/ { + model = "Broadcom BCM94908 Reference Board"; + compatible = "brcm,bcm94908", "brcm,bcm4908", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi index 91c9bd1b47dd..bde6a6bb8dfc 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi @@ -795,7 +795,7 @@ reg = <0x27>; interrupt-parent = <&gpa1>; interrupts = <3 IRQ_TYPE_EDGE_RISING>; - en-gpios = <&gpf1 4 GPIO_ACTIVE_HIGH>; + en-gpios = <&gpf1 4 GPIO_ACTIVE_LOW>; wake-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm64/boot/dts/exynos/exynos850.dtsi b/arch/arm64/boot/dts/exynos/exynos850.dtsi index 9076afd4bb3e..c61441f3a89a 100644 --- a/arch/arm64/boot/dts/exynos/exynos850.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos850.dtsi @@ -286,6 +286,21 @@ clock-names = "oscclk"; }; + cmu_mfcmscl: clock-controller@12c00000 { + compatible = "samsung,exynos850-cmu-mfcmscl"; + reg = <0x12c00000 0x8000>; + #clock-cells = <1>; + + clocks = <&oscclk>, + <&cmu_top CLK_DOUT_MFCMSCL_MFC>, + <&cmu_top CLK_DOUT_MFCMSCL_M2M>, + <&cmu_top CLK_DOUT_MFCMSCL_MCSC>, + <&cmu_top CLK_DOUT_MFCMSCL_JPEG>; + clock-names = "oscclk", "dout_mfcmscl_mfc", + "dout_mfcmscl_m2m", "dout_mfcmscl_mcsc", + "dout_mfcmscl_jpeg"; + }; + cmu_dpu: clock-controller@13000000 { compatible = "samsung,exynos850-cmu-dpu"; reg = <0x13000000 0x8000>; @@ -308,6 +323,29 @@ "dout_hsi_mmc_card", "dout_hsi_usb20drd"; }; + cmu_is: clock-controller@14500000 { + compatible = "samsung,exynos850-cmu-is"; + reg = <0x14500000 0x8000>; + #clock-cells = <1>; + + clocks = <&oscclk>, + <&cmu_top CLK_DOUT_IS_BUS>, + <&cmu_top CLK_DOUT_IS_ITP>, + <&cmu_top CLK_DOUT_IS_VRA>, + <&cmu_top CLK_DOUT_IS_GDC>; + clock-names = "oscclk", "dout_is_bus", "dout_is_itp", + "dout_is_vra", "dout_is_gdc"; + }; + + cmu_aud: clock-controller@14a00000 { + compatible = "samsung,exynos850-cmu-aud"; + reg = <0x14a00000 0x8000>; + #clock-cells = <1>; + + clocks = <&oscclk>, <&cmu_top CLK_DOUT_AUD>; + clock-names = "oscclk", "dout_aud"; + }; + pinctrl_alive: pinctrl@11850000 { compatible = "samsung,exynos850-pinctrl"; reg = <0x11850000 0x1000>; @@ -465,6 +503,51 @@ status = "disabled"; }; + sysmmu_mfcmscl: sysmmu@12c50000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x12c50000 0x9000>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "sysmmu"; + clocks = <&cmu_mfcmscl CLK_GOUT_MFCMSCL_SYSMMU_CLK>; + #iommu-cells = <0>; + }; + + sysmmu_dpu: sysmmu@130c0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x130c0000 0x9000>; + interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "sysmmu"; + clocks = <&cmu_dpu CLK_GOUT_DPU_SMMU_CLK>; + #iommu-cells = <0>; + }; + + sysmmu_is0: sysmmu@14550000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x14550000 0x9000>; + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "sysmmu"; + clocks = <&cmu_is CLK_GOUT_IS_SYSMMU_IS0_CLK>; + #iommu-cells = <0>; + }; + + sysmmu_is1: sysmmu@14570000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x14570000 0x9000>; + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "sysmmu"; + clocks = <&cmu_is CLK_GOUT_IS_SYSMMU_IS1_CLK>; + #iommu-cells = <0>; + }; + + sysmmu_aud: sysmmu@14850000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x14850000 0x9000>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "sysmmu"; + clocks = <&cmu_aud CLK_GOUT_AUD_SYSMMU_CLK>; + #iommu-cells = <0>; + }; + sysreg_peri: syscon@10020000 { compatible = "samsung,exynos850-sysreg", "syscon"; reg = <0x10020000 0x10000>; diff --git a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi index 2013718532f3..5dc361734cfe 100644 --- a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi +++ b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi @@ -207,6 +207,34 @@ "dout_clkcmu_peric1_ip"; }; + cmu_fsys1: clock-controller@17040000 { + compatible = "samsung,exynosautov9-cmu-fsys1"; + reg = <0x17040000 0x8000>; + #clock-cells = <1>; + + clocks = <&xtcxo>, + <&cmu_top DOUT_CLKCMU_FSYS1_BUS>, + <&cmu_top GOUT_CLKCMU_FSYS1_MMC_CARD>, + <&cmu_top DOUT_CLKCMU_FSYS1_USBDRD>; + clock-names = "oscclk", + "dout_clkcmu_fsys1_bus", + "gout_clkcmu_fsys1_mmc_card", + "dout_clkcmu_fsys1_usbdrd"; + }; + + cmu_fsys0: clock-controller@17700000 { + compatible = "samsung,exynosautov9-cmu-fsys0"; + reg = <0x17700000 0x8000>; + #clock-cells = <1>; + + clocks = <&xtcxo>, + <&cmu_top DOUT_CLKCMU_FSYS0_BUS>, + <&cmu_top DOUT_CLKCMU_FSYS0_PCIE>; + clock-names = "oscclk", + "dout_clkcmu_fsys0_bus", + "dout_clkcmu_fsys0_pcie"; + }; + cmu_fsys2: clock-controller@17c00000 { compatible = "samsung,exynosautov9-cmu-fsys2"; reg = <0x17c00000 0x8000>; diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 8bf7f7ecebaa..3ea9edc87909 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -23,6 +23,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-ten64.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2081a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb @@ -48,6 +49,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-85bb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-899b.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-9999.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8dxl-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-data-modul-edm-sbc.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-ddr4-evk.dtb @@ -55,7 +57,8 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-emcon-avari.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-ctouch2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-edimm2.2.dtb -dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-n801x-s.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-bl.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-bl-osm-s.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-mx8menlo.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-nitrogen-r2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-phyboard-polis-rdk.dtb @@ -67,6 +70,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7901.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7902.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7903.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7904.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-dahlia.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-dev.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-dahlia.dtb @@ -83,6 +87,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mn-venice-gw7902.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-msc-sm2s-ep1.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx.dtb diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts index 6b575efd84a7..73eb6061c73e 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts @@ -59,6 +59,10 @@ status = "okay"; }; +&enetc_port3 { + status = "okay"; +}; + &i2c3 { eeprom@57 { compatible = "atmel,24c32"; @@ -104,7 +108,10 @@ }; &mscc_felix_port4 { - ethernet = <&enetc_port2>; + status = "okay"; +}; + +&mscc_felix_port5 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts index 330e34f933a3..113b1df74bf8 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts @@ -39,6 +39,10 @@ status = "okay"; }; +&enetc_port3 { + status = "okay"; +}; + &mscc_felix { status = "okay"; }; @@ -60,6 +64,9 @@ }; &mscc_felix_port4 { - ethernet = <&enetc_port2>; + status = "okay"; +}; + +&mscc_felix_port5 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts index 40d34c8384a5..b949cac03742 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts @@ -25,7 +25,6 @@ &enetc_port0 { phy-handle = <&slot1_sgmii>; phy-mode = "2500base-x"; - managed = "in-band-status"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts index e0cd1516d05b..ecd2c1ea177f 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts @@ -29,6 +29,9 @@ ethernet3 = &mscc_felix_port1; ethernet4 = &mscc_felix_port2; ethernet5 = &mscc_felix_port3; + ethernet6 = &mscc_felix_port4; + ethernet7 = &mscc_felix_port5; + ethernet8 = &enetc_port3; }; chosen { @@ -151,6 +154,10 @@ status = "okay"; }; +&enetc_port3 { + status = "okay"; +}; + &esdhc { sd-uhs-sdr104; sd-uhs-sdr50; @@ -278,7 +285,10 @@ }; &mscc_felix_port4 { - ethernet = <&enetc_port2>; + status = "okay"; +}; + +&mscc_felix_port5 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index 5627dd7734f3..ac1c3a7e5f7a 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -1156,6 +1156,7 @@ mscc_felix_port4: port@4 { reg = <4>; phy-mode = "internal"; + ethernet = <&enetc_port2>; status = "disabled"; fixed-link { @@ -1168,6 +1169,7 @@ mscc_felix_port5: port@5 { reg = <5>; phy-mode = "internal"; + ethernet = <&enetc_port3>; status = "disabled"; fixed-link { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts index fea167d222cf..9b726c2a4842 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts @@ -3,7 +3,7 @@ * Device Tree Include file for Freescale Layerscape-1043A family SoC. * * Copyright 2014-2015 Freescale Semiconductor, Inc. - * Copyright 2018 NXP + * Copyright 2018-2021 NXP * * Mingkai Hu <Mingkai.hu@freescale.com> */ @@ -24,6 +24,22 @@ serial1 = &duart1; serial2 = &duart2; serial3 = &duart3; + sgmii-riser-s1-p1 = &sgmii_phy_s1_p1; + sgmii-riser-s2-p1 = &sgmii_phy_s2_p1; + sgmii-riser-s3-p1 = &sgmii_phy_s3_p1; + sgmii-riser-s4-p1 = &sgmii_phy_s4_p1; + qsgmii-s1-p1 = &qsgmii_phy_s1_p1; + qsgmii-s1-p2 = &qsgmii_phy_s1_p2; + qsgmii-s1-p3 = &qsgmii_phy_s1_p3; + qsgmii-s1-p4 = &qsgmii_phy_s1_p4; + qsgmii-s2-p1 = &qsgmii_phy_s2_p1; + qsgmii-s2-p2 = &qsgmii_phy_s2_p2; + qsgmii-s2-p3 = &qsgmii_phy_s2_p3; + qsgmii-s2-p4 = &qsgmii_phy_s2_p4; + emi1-slot1 = &ls1043mdio_s1; + emi1-slot2 = &ls1043mdio_s2; + emi1-slot3 = &ls1043mdio_s3; + emi1-slot4 = &ls1043mdio_s4; }; chosen { @@ -62,8 +78,11 @@ }; fpga: board-control@2,0 { - compatible = "fsl,ls1043aqds-fpga", "fsl,fpga-qixis"; + compatible = "fsl,ls1043aqds-fpga", "fsl,fpga-qixis", "simple-mfd"; reg = <0x2 0x0 0x0000100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 2 0 0x100>; }; }; @@ -153,3 +172,153 @@ }; #include "fsl-ls1043-post.dtsi" + +&fman0 { + ethernet@e0000 { + phy-handle = <&qsgmii_phy_s2_p1>; + phy-connection-type = "sgmii"; + }; + + ethernet@e2000 { + phy-handle = <&qsgmii_phy_s2_p2>; + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + phy-handle = <&rgmii_phy1>; + phy-connection-type = "rgmii"; + }; + + ethernet@e6000 { + phy-handle = <&rgmii_phy2>; + phy-connection-type = "rgmii"; + }; + + ethernet@e8000 { + phy-handle = <&qsgmii_phy_s2_p3>; + phy-connection-type = "sgmii"; + }; + + ethernet@ea000 { + phy-handle = <&qsgmii_phy_s2_p4>; + phy-connection-type = "sgmii"; + }; + + ethernet@f0000 { /* DTSEC9/10GEC1 */ + fixed-link = <1 1 10000 0 0>; + phy-connection-type = "xgmii"; + }; +}; + +&fpga { + mdio-mux-emi1@54 { + compatible = "mdio-mux-mmioreg", "mdio-mux"; + mdio-parent-bus = <&mdio0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x54 1>; /* BRDCFG4 */ + mux-mask = <0xe0>; /* EMI1 */ + + /* On-board RGMII1 PHY */ + ls1043mdio0: mdio@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + rgmii_phy1: ethernet-phy@1 { /* MAC3 */ + reg = <0x1>; + }; + }; + + /* On-board RGMII2 PHY */ + ls1043mdio1: mdio@20 { + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + rgmii_phy2: ethernet-phy@2 { /* MAC4 */ + reg = <0x2>; + }; + }; + + /* Slot 1 */ + ls1043mdio_s1: mdio@40 { + reg = <0x40>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + qsgmii_phy_s1_p1: ethernet-phy@4 { + reg = <0x4>; + }; + + qsgmii_phy_s1_p2: ethernet-phy@5 { + reg = <0x5>; + }; + + qsgmii_phy_s1_p3: ethernet-phy@6 { + reg = <0x6>; + }; + + qsgmii_phy_s1_p4: ethernet-phy@7 { + reg = <0x7>; + }; + + sgmii_phy_s1_p1: ethernet-phy@1c { + reg = <0x1c>; + }; + }; + + /* Slot 2 */ + ls1043mdio_s2: mdio@60 { + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + qsgmii_phy_s2_p1: ethernet-phy@8 { + reg = <0x8>; + }; + + qsgmii_phy_s2_p2: ethernet-phy@9 { + reg = <0x9>; + }; + + qsgmii_phy_s2_p3: ethernet-phy@a { + reg = <0xa>; + }; + + qsgmii_phy_s2_p4: ethernet-phy@b { + reg = <0xb>; + }; + + sgmii_phy_s2_p1: ethernet-phy@1c { + reg = <0x1c>; + }; + }; + + /* Slot 3 */ + ls1043mdio_s3: mdio@80 { + reg = <0x80>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sgmii_phy_s3_p1: ethernet-phy@1c { + reg = <0x1c>; + }; + }; + + /* Slot 4 */ + ls1043mdio_s4: mdio@a0 { + reg = <0xa0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sgmii_phy_s4_p1: ethernet-phy@1c { + reg = <0x1c>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts index b290605e92cf..26f8540cb101 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts @@ -29,23 +29,33 @@ &i2c0 { status = "okay"; + ina220@40 { compatible = "ti,ina220"; reg = <0x40>; shunt-resistor = <1000>; }; + adt7461a@4c { compatible = "adi,adt7461"; reg = <0x4c>; }; + + rtc@51 { + compatible = "nxp,pcf85263"; + reg = <0x51>; + }; + eeprom@52 { compatible = "atmel,24c512"; reg = <0x52>; }; + eeprom@53 { compatible = "atmel,24c512"; reg = <0x53>; }; + rtc@68 { compatible = "pericom,pt7c4338"; reg = <0x68>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index ca3d5a90d6d4..704f72caddd3 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -11,6 +11,7 @@ #include <dt-bindings/clock/fsl,qoriq-clockgen.h> #include <dt-bindings/thermal/thermal.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/gpio/gpio.h> / { compatible = "fsl,ls1043a"; @@ -300,6 +301,8 @@ #address-cells = <2>; #size-cells = <2>; ranges; + dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>; + dma-coherent; clockgen: clocking@1ee1000 { compatible = "fsl,ls1043a-clockgen"; @@ -393,7 +396,7 @@ dcfg: dcfg@1ee0000 { compatible = "fsl,ls1043a-dcfg", "syscon"; - reg = <0x0 0x1ee0000 0x0 0x10000>; + reg = <0x0 0x1ee0000 0x0 0x1000>; big-endian; }; @@ -536,7 +539,7 @@ }; i2c0: i2c@2180000 { - compatible = "fsl,vf610-i2c"; + compatible = "fsl,ls1043a-i2c", "fsl,vf610-i2c"; #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2180000 0x0 0x10000>; @@ -551,7 +554,7 @@ }; i2c1: i2c@2190000 { - compatible = "fsl,vf610-i2c"; + compatible = "fsl,ls1043a-i2c", "fsl,vf610-i2c"; #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2190000 0x0 0x10000>; @@ -559,11 +562,12 @@ clock-names = "i2c"; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; + scl-gpios = <&gpio4 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; }; i2c2: i2c@21a0000 { - compatible = "fsl,vf610-i2c"; + compatible = "fsl,ls1043a-i2c", "fsl,vf610-i2c"; #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x21a0000 0x0 0x10000>; @@ -571,11 +575,12 @@ clock-names = "i2c"; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; + scl-gpios = <&gpio4 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; }; i2c3: i2c@21b0000 { - compatible = "fsl,vf610-i2c"; + compatible = "fsl,ls1043a-i2c", "fsl,vf610-i2c"; #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x21b0000 0x0 0x10000>; @@ -583,6 +588,7 @@ clock-names = "i2c"; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; + scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; }; @@ -810,48 +816,59 @@ QORIQ_CLK_PLL_DIV(1)>; }; - usb0: usb@2f00000 { - compatible = "snps,dwc3"; - reg = <0x0 0x2f00000 0x0 0x10000>; - interrupts = <0 60 0x4>; - dr_mode = "host"; - snps,quirk-frame-length-adjustment = <0x20>; - snps,dis_rxdet_inp3_quirk; - snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; - status = "disabled"; - }; + aux_bus: aux_bus { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + ranges; + dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x00000000>; + + usb0: usb@2f00000 { + compatible = "snps,dwc3"; + reg = <0x0 0x2f00000 0x0 0x10000>; + interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; + usb3-lpm-capable; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + status = "disabled"; + }; - usb1: usb@3000000 { - compatible = "snps,dwc3"; - reg = <0x0 0x3000000 0x0 0x10000>; - interrupts = <0 61 0x4>; - dr_mode = "host"; - snps,quirk-frame-length-adjustment = <0x20>; - snps,dis_rxdet_inp3_quirk; - snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; - status = "disabled"; - }; + usb1: usb@3000000 { + compatible = "snps,dwc3"; + reg = <0x0 0x3000000 0x0 0x10000>; + interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; + usb3-lpm-capable; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + status = "disabled"; + }; - usb2: usb@3100000 { - compatible = "snps,dwc3"; - reg = <0x0 0x3100000 0x0 0x10000>; - interrupts = <0 63 0x4>; - dr_mode = "host"; - snps,quirk-frame-length-adjustment = <0x20>; - snps,dis_rxdet_inp3_quirk; - snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; - status = "disabled"; - }; + usb2: usb@3100000 { + compatible = "snps,dwc3"; + reg = <0x0 0x3100000 0x0 0x10000>; + interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; + usb3-lpm-capable; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + status = "disabled"; + }; - sata: sata@3200000 { - compatible = "fsl,ls1043a-ahci"; - reg = <0x0 0x3200000 0x0 0x10000>, - <0x0 0x20140520 0x0 0x4>; - reg-names = "ahci", "sata-ecc"; - interrupts = <0 69 0x4>; - clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL - QORIQ_CLK_PLL_DIV(1)>; - dma-coherent; + sata: sata@3200000 { + compatible = "fsl,ls1043a-ahci"; + reg = <0x0 0x3200000 0x0 0x10000>, + <0x0 0x20140520 0x0 0x4>; + reg-names = "ahci", "sata-ecc"; + interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; + dma-coherent; + }; }; msi1: msi-controller1@1571000 { @@ -880,13 +897,12 @@ reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */ <0x40 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; - interrupts = <0 118 0x4>, /* controller interrupt */ - <0 117 0x4>; /* PME interrupt */ - interrupt-names = "intr", "pme"; + interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH>, + <0 118 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pme", "aer"; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - dma-coherent; num-viewport = <6>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */ @@ -898,6 +914,8 @@ <0000 0 0 2 &gic 0 111 0x4>, <0000 0 0 3 &gic 0 112 0x4>, <0000 0 0 4 &gic 0 113 0x4>; + fsl,pcie-scfg = <&scfg 0>; + big-endian; status = "disabled"; }; @@ -906,13 +924,12 @@ reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */ <0x48 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; - interrupts = <0 128 0x4>, - <0 127 0x4>; - interrupt-names = "intr", "pme"; + interrupts = <0 127 IRQ_TYPE_LEVEL_HIGH>, + <0 128 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pme", "aer"; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - dma-coherent; num-viewport = <6>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */ @@ -924,6 +941,8 @@ <0000 0 0 2 &gic 0 121 0x4>, <0000 0 0 3 &gic 0 122 0x4>, <0000 0 0 4 &gic 0 123 0x4>; + fsl,pcie-scfg = <&scfg 1>; + big-endian; status = "disabled"; }; @@ -932,13 +951,12 @@ reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */ <0x50 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; - interrupts = <0 162 0x4>, - <0 161 0x4>; - interrupt-names = "intr", "pme"; + interrupts = <0 161 IRQ_TYPE_LEVEL_HIGH>, + <0 162 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pme", "aer"; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - dma-coherent; num-viewport = <6>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000 /* downstream I/O */ @@ -950,6 +968,8 @@ <0000 0 0 2 &gic 0 155 0x4>, <0000 0 0 3 &gic 0 156 0x4>, <0000 0 0 4 &gic 0 157 0x4>; + fsl,pcie-scfg = <&scfg 2>; + big-endian; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts index eec62c63dafe..b2fcbba60d3a 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts @@ -3,7 +3,7 @@ * Device Tree Include file for Freescale Layerscape-1046A family SoC. * * Copyright 2016 Freescale Semiconductor, Inc. - * Copyright 2018 NXP + * Copyright 2018-2019 NXP * * Shaohui Xie <Shaohui.Xie@nxp.com> */ @@ -17,14 +17,26 @@ compatible = "fsl,ls1046a-qds", "fsl,ls1046a"; aliases { + emi1-slot1 = &ls1046mdio_s1; + emi1-slot2 = &ls1046mdio_s2; + emi1-slot4 = &ls1046mdio_s4; gpio0 = &gpio0; gpio1 = &gpio1; gpio2 = &gpio2; gpio3 = &gpio3; + qsgmii-s2-p1 = &qsgmii_phy_s2_p1; + qsgmii-s2-p2 = &qsgmii_phy_s2_p2; + qsgmii-s2-p3 = &qsgmii_phy_s2_p3; + qsgmii-s2-p4 = &qsgmii_phy_s2_p4; serial0 = &duart0; serial1 = &duart1; serial2 = &duart2; serial3 = &duart3; + sgmii-s1-p1 = &sgmii_phy_s1_p1; + sgmii-s1-p2 = &sgmii_phy_s1_p2; + sgmii-s1-p3 = &sgmii_phy_s1_p3; + sgmii-s1-p4 = &sgmii_phy_s1_p4; + sgmii-s4-p1 = &sgmii_phy_s4_p1; }; chosen { @@ -153,8 +165,9 @@ }; fpga: board-control@2,0 { - compatible = "fsl,ls1046aqds-fpga", "fsl,fpga-qixis"; + compatible = "fsl,ls1046aqds-fpga", "fsl,fpga-qixis", "simple-mfd"; reg = <0x2 0x0 0x0000100>; + ranges = <0 2 0 0x100>; }; }; @@ -169,7 +182,7 @@ compatible = "spansion,m25p80"; #address-cells = <1>; #size-cells = <1>; - spi-max-frequency = <20000000>; + spi-max-frequency = <50000000>; spi-rx-bus-width = <4>; spi-tx-bus-width = <4>; reg = <0>; @@ -177,3 +190,141 @@ }; #include "fsl-ls1046-post.dtsi" + +&fman0 { + ethernet@e0000 { + phy-handle = <&qsgmii_phy_s2_p1>; + phy-connection-type = "sgmii"; + }; + + ethernet@e2000 { + phy-handle = <&sgmii_phy_s4_p1>; + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + phy-handle = <&rgmii_phy1>; + phy-connection-type = "rgmii"; + }; + + ethernet@e6000 { + phy-handle = <&rgmii_phy2>; + phy-connection-type = "rgmii"; + }; + + ethernet@e8000 { + phy-handle = <&sgmii_phy_s1_p3>; + phy-connection-type = "sgmii"; + }; + + ethernet@ea000 { + phy-handle = <&sgmii_phy_s1_p4>; + phy-connection-type = "sgmii"; + }; + + ethernet@f0000 { /* DTSEC9/10GEC1 */ + phy-handle = <&sgmii_phy_s1_p1>; + phy-connection-type = "xgmii"; + }; + + ethernet@f2000 { /* DTSEC10/10GEC2 */ + phy-handle = <&sgmii_phy_s1_p2>; + phy-connection-type = "xgmii"; + }; +}; + +&fpga { + #address-cells = <1>; + #size-cells = <1>; + + mdio-mux-emi1 { + compatible = "mdio-mux-mmioreg", "mdio-mux"; + mdio-parent-bus = <&mdio0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x54 1>; /* BRDCFG4 */ + mux-mask = <0xe0>; /* EMI1 */ + + /* On-board RGMII1 PHY */ + ls1046mdio0: mdio@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + rgmii_phy1: ethernet-phy@1 { /* MAC3 */ + reg = <0x1>; + }; + }; + + /* On-board RGMII2 PHY */ + ls1046mdio1: mdio@1 { + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + rgmii_phy2: ethernet-phy@2 { /* MAC4 */ + reg = <0x2>; + }; + }; + + /* Slot 1 */ + ls1046mdio_s1: mdio@2 { + reg = <0x40>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sgmii_phy_s1_p1: ethernet-phy@1c { + reg = <0x1c>; + }; + + sgmii_phy_s1_p2: ethernet-phy@1d { + reg = <0x1d>; + }; + + sgmii_phy_s1_p3: ethernet-phy@1e { + reg = <0x1e>; + }; + + sgmii_phy_s1_p4: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + + /* Slot 2 */ + ls1046mdio_s2: mdio@3 { + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + qsgmii_phy_s2_p1: ethernet-phy@8 { + reg = <0x8>; + }; + + qsgmii_phy_s2_p2: ethernet-phy@9 { + reg = <0x9>; + }; + + qsgmii_phy_s2_p3: ethernet-phy@a { + reg = <0xa>; + }; + + qsgmii_phy_s2_p4: ethernet-phy@b { + reg = <0xb>; + }; + }; + + /* Slot 4 */ + ls1046mdio_s4: mdio@5 { + reg = <0x80>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sgmii_phy_s4_p1: ethernet-phy@1c { + reg = <0x1c>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index feab604322cf..3d9e29824bb2 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -11,6 +11,7 @@ #include <dt-bindings/clock/fsl,qoriq-clockgen.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/thermal/thermal.h> +#include <dt-bindings/gpio/gpio.h> / { compatible = "fsl,ls1046a"; @@ -272,6 +273,8 @@ #address-cells = <2>; #size-cells = <2>; ranges; + dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>; + dma-coherent; ddr: memory-controller@1080000 { compatible = "fsl,qoriq-memory-controller"; @@ -354,7 +357,6 @@ ranges = <0x0 0x00 0x1700000 0x100000>; reg = <0x00 0x1700000 0x0 0x100000>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; - dma-coherent; sec_jr0: jr@10000 { compatible = "fsl,sec-v5.4-job-ring", @@ -500,7 +502,7 @@ }; i2c0: i2c@2180000 { - compatible = "fsl,vf610-i2c"; + compatible = "fsl,ls1046a-i2c", "fsl,vf610-i2c"; #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2180000 0x0 0x10000>; @@ -514,35 +516,38 @@ }; i2c1: i2c@2190000 { - compatible = "fsl,vf610-i2c"; + compatible = "fsl,ls1046a-i2c", "fsl,vf610-i2c"; #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2190000 0x0 0x10000>; interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>; + scl-gpios = <&gpio3 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; }; i2c2: i2c@21a0000 { - compatible = "fsl,vf610-i2c"; + compatible = "fsl,ls1046a-i2c", "fsl,vf610-i2c"; #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x21a0000 0x0 0x10000>; interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>; + scl-gpios = <&gpio3 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; }; i2c3: i2c@21b0000 { - compatible = "fsl,vf610-i2c"; + compatible = "fsl,ls1046a-i2c", "fsl,vf610-i2c"; #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x21b0000 0x0 0x10000>; interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>; + scl-gpios = <&gpio3 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; }; @@ -709,44 +714,55 @@ QORIQ_CLK_PLL_DIV(2)>; }; - usb0: usb@2f00000 { - compatible = "snps,dwc3"; - reg = <0x0 0x2f00000 0x0 0x10000>; - interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; - dr_mode = "host"; - snps,quirk-frame-length-adjustment = <0x20>; - snps,dis_rxdet_inp3_quirk; - snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; - }; - - usb1: usb@3000000 { - compatible = "snps,dwc3"; - reg = <0x0 0x3000000 0x0 0x10000>; - interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; - dr_mode = "host"; - snps,quirk-frame-length-adjustment = <0x20>; - snps,dis_rxdet_inp3_quirk; - snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; - }; - - usb2: usb@3100000 { - compatible = "snps,dwc3"; - reg = <0x0 0x3100000 0x0 0x10000>; - interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; - dr_mode = "host"; - snps,quirk-frame-length-adjustment = <0x20>; - snps,dis_rxdet_inp3_quirk; - snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; - }; - - sata: sata@3200000 { - compatible = "fsl,ls1046a-ahci"; - reg = <0x0 0x3200000 0x0 0x10000>, - <0x0 0x20140520 0x0 0x4>; - reg-names = "ahci", "sata-ecc"; - interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL - QORIQ_CLK_PLL_DIV(2)>; + aux_bus: aux_bus { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + ranges; + dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x00000000>; + + usb0: usb@2f00000 { + compatible = "snps,dwc3"; + reg = <0x0 0x2f00000 0x0 0x10000>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + usb3-lpm-capable; + }; + + usb1: usb@3000000 { + compatible = "snps,dwc3"; + reg = <0x0 0x3000000 0x0 0x10000>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + usb3-lpm-capable; + }; + + usb2: usb@3100000 { + compatible = "snps,dwc3"; + reg = <0x0 0x3100000 0x0 0x10000>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + usb3-lpm-capable; + }; + + sata: sata@3200000 { + compatible = "fsl,ls1046a-ahci"; + reg = <0x0 0x3200000 0x0 0x10000>, + <0x0 0x20140520 0x0 0x4>; + reg-names = "ahci", "sata-ecc"; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; + }; }; msi1: msi-controller@1580000 { @@ -790,7 +806,6 @@ #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - dma-coherent; num-viewport = <8>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */ @@ -802,6 +817,7 @@ <0000 0 0 2 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 3 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 4 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + big-endian; status = "disabled"; }; @@ -810,8 +826,11 @@ reg = <0x00 0x03400000 0x0 0x00100000>, <0x40 0x00000000 0x8 0x00000000>; reg-names = "regs", "addr_space"; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pme"; num-ib-windows = <6>; num-ob-windows = <8>; + big-endian; status = "disabled"; }; @@ -826,7 +845,6 @@ #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - dma-coherent; num-viewport = <8>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */ @@ -838,6 +856,7 @@ <0000 0 0 2 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 3 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 4 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + big-endian; status = "disabled"; }; @@ -846,8 +865,11 @@ reg = <0x00 0x03500000 0x0 0x00100000>, <0x48 0x00000000 0x8 0x00000000>; reg-names = "regs", "addr_space"; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pme"; num-ib-windows = <6>; num-ob-windows = <8>; + big-endian; status = "disabled"; }; @@ -862,7 +884,6 @@ #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - dma-coherent; num-viewport = <8>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000 /* downstream I/O */ @@ -874,6 +895,7 @@ <0000 0 0 2 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 3 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 4 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + big-endian; status = "disabled"; }; @@ -882,8 +904,11 @@ reg = <0x00 0x03600000 0x0 0x00100000>, <0x50 0x00000000 0x8 0x00000000>; reg-names = "regs", "addr_space"; + interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pme"; num-ib-windows = <6>; num-ob-windows = <8>; + big-endian; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts index 44894356059c..8b6915136997 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts @@ -14,6 +14,7 @@ #include "fsl-ls2080a.dtsi" #include "fsl-ls208xa-rdb.dtsi" +#include <dt-bindings/interrupt-controller/arm-gic.h> / { model = "Freescale Layerscape 2080a RDB Board"; @@ -23,3 +24,71 @@ stdout-path = "serial1:115200n8"; }; }; + +&dpmac5 { + phy-handle = <&mdio2_phy1>; + phy-connection-type = "10gbase-r"; +}; + +&dpmac6 { + phy-handle = <&mdio2_phy2>; + phy-connection-type = "10gbase-r"; +}; + +&dpmac7 { + phy-handle = <&mdio2_phy3>; + phy-connection-type = "10gbase-r"; +}; + +&dpmac8 { + phy-handle = <&mdio2_phy4>; + phy-connection-type = "10gbase-r"; +}; + +&emdio1 { + status = "disabled"; + + /* CS4340 PHYs */ + mdio1_phy1: emdio1-phy@10 { + reg = <0x10>; + }; + + mdio1_phy2: emdio1-phy@11 { + reg = <0x11>; + }; + + mdio1_phy3: emdio1-phy@12 { + reg = <0x12>; + }; + + mdio1_phy4: emdio1-phy@13 { + reg = <0x13>; + }; +}; + +&emdio2 { + /* AQR405 PHYs */ + mdio2_phy1: emdio2-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0>; + }; + + mdio2_phy2: emdio2-phy@1 { + compatible = "ethernet-phy-ieee802.3-c45"; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x1>; + }; + + mdio2_phy3: emdio2-phy@2 { + compatible = "ethernet-phy-ieee802.3-c45"; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x2>; + }; + + mdio2_phy4: emdio2-phy@3 { + compatible = "ethernet-phy-ieee802.3-c45"; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x3>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi index 6f6667b70028..a2cadf757148 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi @@ -150,3 +150,7 @@ ranges = <0x81000000 0x0 0x00000000 0x16 0x00010000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x16 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ }; + +&timer { + fsl,erratum-a008585; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts new file mode 100644 index 000000000000..4461e16fd53a --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts @@ -0,0 +1,132 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for NXP LS2081A RDB Board. + * + * Copyright 2017 NXP + * + * Priyanka Jain <priyanka.jain@nxp.com> + * + */ + +/dts-v1/; + +#include "fsl-ls2088a.dtsi" + +/ { + model = "NXP Layerscape 2081A RDB Board"; + compatible = "fsl,ls2081a-rdb", "fsl,ls2081a"; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + }; + + chosen { + stdout-path = "serial1:115200n8"; + }; +}; + +&dspi { + status = "okay"; + + n25q512a: flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <3000000>; + reg = <0>; + }; +}; + +&esdhc { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + pca9547: mux@75 { + compatible = "nxp,pca9547"; + reg = <0x75>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; + + rtc@51 { + compatible = "nxp,pcf2129"; + reg = <0x51>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <500>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + adt7481@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + }; + }; +}; + +&ifc { + status = "disabled"; +}; + +&qspi { + status = "okay"; + + s25fs512s0: flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + spi-max-frequency = <20000000>; + reg = <0>; + }; + + s25fs512s1: flash@1 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + spi-max-frequency = <20000000>; + reg = <1>; + }; +}; + +&sata0 { + status = "okay"; +}; + +&sata1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi index 6fab73d484b6..f598669e742f 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi @@ -9,6 +9,27 @@ * */ +/* Update DPMAC connections to external PHYs, under SerDes 0x2a_0x49. */ +&dpmac9 { + phy-handle = <&mdio0_phy12>; + phy-connection-type = "sgmii"; +}; + +&dpmac10 { + phy-handle = <&mdio0_phy13>; + phy-connection-type = "sgmii"; +}; + +&dpmac11 { + phy-handle = <&mdio0_phy14>; + phy-connection-type = "sgmii"; +}; + +&dpmac12 { + phy-handle = <&mdio0_phy15>; + phy-connection-type = "sgmii"; +}; + &esdhc { mmc-hs200-1_8v; status = "okay"; @@ -36,9 +57,47 @@ reg = <0x2 0x0 0x10000>; }; - cpld@3,0 { - reg = <0x3 0x0 0x10000>; - compatible = "fsl,ls2080aqds-fpga", "fsl,fpga-qixis"; + boardctrl: board-control@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ls208xaqds-fpga", "fsl,fpga-qixis", "simple-mfd"; + reg = <3 0 0x1000>; + ranges = <0 3 0 0x1000>; + + mdio-mux-emi1@54 { + compatible = "mdio-mux-mmioreg", "mdio-mux"; + mdio-parent-bus = <&emdio1>; + reg = <0x54 1>; /* BRDCFG4 */ + mux-mask = <0xe0>; /* EMI1_MDIO */ + #address-cells=<1>; + #size-cells = <0>; + + /* Child MDIO buses, one for each riser card: + * reg = 0x0, 0x20, 0x40, 0x60, 0x80, 0xa0. + * VSC8234 PHYs on the riser cards. + */ + mdio_mux3: mdio@60 { + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + mdio0_phy12: mdio-phy0@1c { + reg = <0x1c>; + }; + + mdio0_phy13: mdio-phy1@1d { + reg = <0x1d>; + }; + + mdio0_phy14: mdio-phy2@1e { + reg = <0x1e>; + }; + + mdio0_phy15: mdio-phy3@1f { + reg = <0x1f>; + }; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi index f8135c5c252d..3d9647b3da14 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi @@ -49,6 +49,8 @@ reg = <0x75>; #address-cells = <1>; #size-cells = <0>; + idle-state = <0>; + i2c@1 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi index d76f1c42f3fa..f1b9cc8714dc 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi @@ -239,13 +239,12 @@ }; }; - timer { + timer: timer { compatible = "arm,armv8-timer"; interrupts = <1 13 4>, /* Physical Secure PPI, active-low */ <1 14 4>, /* Physical Non-Secure PPI, active-low */ <1 11 4>, /* Virtual PPI, active-low */ <1 10 4>; /* Hypervisor PPI, active-low */ - fsl,erratum-a008585; }; pmu { diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-ddr.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-ddr.dtsi index 8b5cad4e2700..7d5183c6c5be 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-ddr.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-ddr.dtsi @@ -10,7 +10,7 @@ ddr_subsys: bus@5c000000 { #size-cells = <1>; ranges = <0x5c000000 0x0 0x5c000000 0x1000000>; - ddr-pmu@5c020000 { + ddr_pmu0: ddr-pmu@5c020000 { compatible = "fsl,imx8-ddr-pmu"; reg = <0x5c020000 0x10000>; interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi index 960a802b8b6e..d7b4229bb4a2 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi @@ -111,8 +111,9 @@ dma_subsys: bus@5a000000 { i2c0: i2c@5a800000 { reg = <0x5a800000 0x4000>; interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&i2c0_lpcg IMX_LPCG_CLK_0>; - clock-names = "per"; + clocks = <&i2c0_lpcg IMX_LPCG_CLK_0>, + <&i2c0_lpcg IMX_LPCG_CLK_4>; + clock-names = "per", "ipg"; assigned-clocks = <&clk IMX_SC_R_I2C_0 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <24000000>; power-domains = <&pd IMX_SC_R_I2C_0>; @@ -122,8 +123,9 @@ dma_subsys: bus@5a000000 { i2c1: i2c@5a810000 { reg = <0x5a810000 0x4000>; interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&i2c1_lpcg IMX_LPCG_CLK_0>; - clock-names = "per"; + clocks = <&i2c1_lpcg IMX_LPCG_CLK_0>, + <&i2c1_lpcg IMX_LPCG_CLK_4>; + clock-names = "per", "ipg"; assigned-clocks = <&clk IMX_SC_R_I2C_1 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <24000000>; power-domains = <&pd IMX_SC_R_I2C_1>; @@ -133,8 +135,9 @@ dma_subsys: bus@5a000000 { i2c2: i2c@5a820000 { reg = <0x5a820000 0x4000>; interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&i2c2_lpcg IMX_LPCG_CLK_0>; - clock-names = "per"; + clocks = <&i2c2_lpcg IMX_LPCG_CLK_0>, + <&i2c2_lpcg IMX_LPCG_CLK_4>; + clock-names = "per", "ipg"; assigned-clocks = <&clk IMX_SC_R_I2C_2 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <24000000>; power-domains = <&pd IMX_SC_R_I2C_2>; @@ -144,8 +147,9 @@ dma_subsys: bus@5a000000 { i2c3: i2c@5a830000 { reg = <0x5a830000 0x4000>; interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&i2c3_lpcg IMX_LPCG_CLK_0>; - clock-names = "per"; + clocks = <&i2c3_lpcg IMX_LPCG_CLK_0>, + <&i2c3_lpcg IMX_LPCG_CLK_4>; + clock-names = "per", "ipg"; assigned-clocks = <&clk IMX_SC_R_I2C_3 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <24000000>; power-domains = <&pd IMX_SC_R_I2C_3>; diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts new file mode 100644 index 000000000000..ca2a43e0cbf6 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts @@ -0,0 +1,426 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019~2020, 2022 NXP + */ + +/dts-v1/; + +#include "imx8dxl.dtsi" + +/ { + model = "Freescale i.MX8DXL EVK"; + compatible = "fsl,imx8dxl-evk", "fsl,imx8dxl"; + + aliases { + i2c2 = &i2c2; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + serial0 = &lpuart0; + }; + + chosen { + stdout-path = &lpuart0; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x00000000 0x80000000 0 0x40000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* + * Memory reserved for optee usage. Please do not use. + * This will be automatically added to dtb if OP-TEE is installed. + * optee@96000000 { + * reg = <0 0x96000000 0 0x2000000>; + * no-map; + * }; + */ + + /* global autoconfigured region for contiguous allocations */ + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0 0x14000000>; + alloc-ranges = <0 0x98000000 0 0x14000000>; + linux,cma-default; + }; + }; + + mux3_en: regulator-0 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "mux3_en"; + gpio = <&pca6416_2 8 GPIO_ACTIVE_LOW>; + regulator-always-on; + }; + + reg_fec1_sel: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "fec1_supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pca6416_1 11 GPIO_ACTIVE_LOW>; + regulator-always-on; + status = "disabled"; + }; + + reg_fec1_io: regulator-2 { + compatible = "regulator-fixed"; + regulator-name = "fec1_io_supply"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&max7322 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + status = "disabled"; + }; + + reg_usdhc2_vmmc: regulator-3 { + compatible = "regulator-fixed"; + regulator-name = "SD1_SPWR"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&lsio_gpio4 30 GPIO_ACTIVE_HIGH>; + enable-active-high; + off-on-delay-us = <3480>; + }; +}; + +&eqos { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eqos>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + nvmem-cells = <&fec_mac1>; + nvmem-cell-names = "mac-address"; + snps,reset-gpios = <&pca6416_1 2 GPIO_ACTIVE_LOW>; + snps,reset-delays-us = <10 20 200000>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + eee-broken-1000t; + qca,disable-smarteee; + vddio-supply = <&vddio0>; + + vddio0: vddio-regulator { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + }; +}; + +/* + * fec1 shares the some PINs with usdhc2. + * by default usdhc2 is enabled in this dts. + * Please disable usdhc2 to enable fec1 + */ +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-txid"; + phy-handle = <ðphy1>; + fsl,magic-packet; + rx-internal-delay-ps = <2000>; + nvmem-cells = <&fec_mac0>; + nvmem-cell-names = "mac-address"; + status = "disabled"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + reset-gpios = <&pca6416_1 0 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + qca,disable-smarteee; + vddio-supply = <&vddio1>; + + vddio1: vddio-regulator { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + }; +}; + +&i2c2 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + pca6416_1: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + pca6416_2: gpio@21 { + compatible = "ti,tca6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + + pca9548_1: i2c-mux@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + + max7322: gpio@68 { + compatible = "maxim,max7322"; + reg = <0x68>; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + }; + + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x4>; + }; + + i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x5>; + }; + + i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x6>; + }; + }; +}; + +&lpuart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart0>; + status = "okay"; +}; + +&lsio_gpio4 { + status = "okay"; +}; + +&lsio_gpio5 { + status = "okay"; +}; + +&thermal_zones { + pmic-thermal0 { + polling-delay-passive = <250>; + polling-delay = <2000>; + thermal-sensors = <&tsens IMX_SC_R_PMIC_0>; + + trips { + pmic_alert0: trip0 { + temperature = <110000>; + hysteresis = <2000>; + type = "passive"; + }; + + pmic_crit0: trip1 { + temperature = <125000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&pmic_alert0>; + cooling-device = + <&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <8>; + no-sd; + no-sdio; + non-removable; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + bus-width = <4>; + vmmc-supply = <®_usdhc2_vmmc>; + cd-gpios = <&lsio_gpio5 1 GPIO_ACTIVE_LOW>; + wp-gpios = <&lsio_gpio5 0 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + IMX8DXL_COMP_CTL_GPIO_1V8_3V3_GPIORHB_PAD 0x000514a0 + IMX8DXL_COMP_CTL_GPIO_1V8_3V3_GPIORHK_PAD 0x000014a0 + IMX8DXL_SPI3_CS0_ADMA_ACM_MCLK_OUT1 0x0600004c + IMX8DXL_SNVS_TAMPER_OUT1_LSIO_GPIO2_IO05_IN 0x0600004c + >; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + IMX8DXL_USB_SS3_TC0_CONN_USB_OTG1_PWR 0x00000021 + >; + }; + + pinctrl_usbotg2: usbotg2grp { + fsl,pins = < + IMX8DXL_USB_SS3_TC1_CONN_USB_OTG2_PWR 0x00000021 + >; + }; + + pinctrl_eqos: eqosgrp { + fsl,pins = < + IMX8DXL_ENET0_MDC_CONN_EQOS_MDC 0x06000020 + IMX8DXL_ENET0_MDIO_CONN_EQOS_MDIO 0x06000020 + IMX8DXL_ENET1_RGMII_RXC_CONN_EQOS_RGMII_RXC 0x06000020 + IMX8DXL_ENET1_RGMII_RXD0_CONN_EQOS_RGMII_RXD0 0x06000020 + IMX8DXL_ENET1_RGMII_RXD1_CONN_EQOS_RGMII_RXD1 0x06000020 + IMX8DXL_ENET1_RGMII_RXD2_CONN_EQOS_RGMII_RXD2 0x06000020 + IMX8DXL_ENET1_RGMII_RXD3_CONN_EQOS_RGMII_RXD3 0x06000020 + IMX8DXL_ENET1_RGMII_RX_CTL_CONN_EQOS_RGMII_RX_CTL 0x06000020 + IMX8DXL_ENET1_RGMII_TXC_CONN_EQOS_RGMII_TXC 0x06000020 + IMX8DXL_ENET1_RGMII_TXD0_CONN_EQOS_RGMII_TXD0 0x06000020 + IMX8DXL_ENET1_RGMII_TXD1_CONN_EQOS_RGMII_TXD1 0x06000020 + IMX8DXL_ENET1_RGMII_TXD2_CONN_EQOS_RGMII_TXD2 0x06000020 + IMX8DXL_ENET1_RGMII_TXD3_CONN_EQOS_RGMII_TXD3 0x06000020 + IMX8DXL_ENET1_RGMII_TX_CTL_CONN_EQOS_RGMII_TX_CTL 0x06000020 + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + IMX8DXL_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB0_PAD 0x000014a0 + IMX8DXL_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB1_PAD 0x000014a0 + IMX8DXL_ENET0_MDC_CONN_ENET0_MDC 0x06000020 + IMX8DXL_ENET0_MDIO_CONN_ENET0_MDIO 0x06000020 + IMX8DXL_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC 0x00000060 + IMX8DXL_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x00000060 + IMX8DXL_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x00000060 + IMX8DXL_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2 0x00000060 + IMX8DXL_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 0x00000060 + IMX8DXL_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x00000060 + IMX8DXL_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC 0x00000060 + IMX8DXL_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x00000060 + IMX8DXL_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x00000060 + IMX8DXL_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2 0x00000060 + IMX8DXL_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3 0x00000060 + IMX8DXL_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x00000060 + >; + }; + + pinctrl_lpspi3: lpspi3grp { + fsl,pins = < + IMX8DXL_SPI3_SCK_ADMA_SPI3_SCK 0x6000040 + IMX8DXL_SPI3_SDO_ADMA_SPI3_SDO 0x6000040 + IMX8DXL_SPI3_SDI_ADMA_SPI3_SDI 0x6000040 + IMX8DXL_SPI3_CS1_ADMA_SPI3_CS1 0x6000040 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + IMX8DXL_SPI1_SCK_ADMA_I2C2_SDA 0x06000021 + IMX8DXL_SPI1_SDO_ADMA_I2C2_SCL 0x06000021 + >; + }; + + pinctrl_cm40_lpuart: cm40lpuartgrp { + fsl,pins = < + IMX8DXL_ADC_IN2_M40_UART0_RX 0x06000020 + IMX8DXL_ADC_IN3_M40_UART0_TX 0x06000020 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + IMX8DXL_SPI1_CS0_ADMA_I2C3_SDA 0x06000021 + IMX8DXL_SPI1_SDI_ADMA_I2C3_SCL 0x06000021 + >; + }; + + pinctrl_lpuart0: lpuart0grp { + fsl,pins = < + IMX8DXL_UART0_RX_ADMA_UART0_RX 0x06000020 + IMX8DXL_UART0_TX_ADMA_UART0_TX 0x06000020 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + IMX8DXL_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 + IMX8DXL_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021 + IMX8DXL_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021 + IMX8DXL_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021 + IMX8DXL_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021 + IMX8DXL_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021 + IMX8DXL_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021 + IMX8DXL_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021 + IMX8DXL_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021 + IMX8DXL_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021 + IMX8DXL_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000041 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + IMX8DXL_ENET0_RGMII_TX_CTL_LSIO_GPIO4_IO30 0x00000040 /* RESET_B */ + IMX8DXL_ENET0_RGMII_TXD1_LSIO_GPIO5_IO00 0x00000021 /* WP */ + IMX8DXL_ENET0_RGMII_TXD2_LSIO_GPIO5_IO01 0x00000021 /* CD */ + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + IMX8DXL_ENET0_RGMII_RXC_CONN_USDHC1_CLK 0x06000041 + IMX8DXL_ENET0_RGMII_RX_CTL_CONN_USDHC1_CMD 0x00000021 + IMX8DXL_ENET0_RGMII_RXD0_CONN_USDHC1_DATA0 0x00000021 + IMX8DXL_ENET0_RGMII_RXD1_CONN_USDHC1_DATA1 0x00000021 + IMX8DXL_ENET0_RGMII_RXD2_CONN_USDHC1_DATA2 0x00000021 + IMX8DXL_ENET0_RGMII_RXD3_CONN_USDHC1_DATA3 0x00000021 + IMX8DXL_ENET0_RGMII_TXD0_CONN_USDHC1_VSELECT 0x00000021 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi new file mode 100644 index 000000000000..795d1d472fae --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi @@ -0,0 +1,52 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019~2020, 2022 NXP + */ + +&audio_ipg_clk { + clock-frequency = <160000000>; +}; + +&dma_ipg_clk { + clock-frequency = <160000000>; +}; + +&i2c0 { + compatible = "fsl,imx8dxl-lpi2c", "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; + interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; +}; + +&i2c1 { + compatible = "fsl,imx8dxl-lpi2c", "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; +}; + +&i2c2 { + compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; + interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; +}; + +&i2c3 { + compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; +}; + +&lpuart0 { + compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; + interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>; +}; + +&lpuart1 { + compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; +}; + +&lpuart2 { + compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; + interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>; +}; + +&lpuart3 { + compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; + interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi new file mode 100644 index 000000000000..69c4849f2132 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi @@ -0,0 +1,142 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019~2020, 2022 NXP + */ + +/delete-node/ &enet1_lpcg; +/delete-node/ &fec2; + +&conn_subsys { + conn_enet0_root_clk: clock-conn-enet0-root { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <250000000>; + clock-output-names = "conn_enet0_root_clk"; + }; + + eqos: ethernet@5b050000 { + compatible = "nxp,imx8dxl-dwmac-eqos", "snps,dwmac-5.10a"; + reg = <0x5b050000 0x10000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "eth_wake_irq", "macirq"; + clocks = <&eqos_lpcg IMX_LPCG_CLK_4>, + <&eqos_lpcg IMX_LPCG_CLK_6>, + <&eqos_lpcg IMX_LPCG_CLK_0>, + <&eqos_lpcg IMX_LPCG_CLK_5>, + <&eqos_lpcg IMX_LPCG_CLK_2>; + clock-names = "stmmaceth", "pclk", "ptp_ref", "tx", "mem"; + assigned-clocks = <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <125000000>; + power-domains = <&pd IMX_SC_R_ENET_1>; + status = "disabled"; + }; + + usbotg2: usb@5b0e0000 { + compatible = "fsl,imx8dxl-usb", "fsl,imx7ulp-usb"; + reg = <0x5b0e0000 0x200>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; + fsl,usbphy = <&usbphy2>; + fsl,usbmisc = <&usbmisc2 0>; + /* + * usbotg1 and usbotg2 share one clcok. + * scu firmware disables the access to the clock and keeps + * it always on in case other core (M4) uses one of these. + */ + clocks = <&clk_dummy>; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x10>; + rx-burst-size-dword = <0x10>; + #stream-id-cells = <1>; + power-domains = <&pd IMX_SC_R_USB_1>; + status = "disabled"; + + clk_dummy: clock-dummy { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "clk_dummy"; + }; + }; + + usbmisc2: usbmisc@5b0e0200 { + #index-cells = <1>; + compatible = "fsl,imx7ulp-usbmisc"; + reg = <0x5b0e0200 0x200>; + }; + + usbphy2: usbphy@0x5b110000 { + compatible = "fsl,imx8dxl-usbphy", "fsl,imx7ulp-usbphy"; + reg = <0x5b110000 0x1000>; + clocks = <&usb2_2_lpcg IMX_LPCG_CLK_7>; + power-domains = <&pd IMX_SC_R_USB_1_PHY>; + status = "disabled"; + }; + + eqos_lpcg: clock-controller@5b240000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5b240000 0x10000>; + #clock-cells = <1>; + clocks = <&conn_enet0_root_clk>, + <&conn_axi_clk>, + <&conn_axi_clk>, + <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>, + <&conn_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_2>, + <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>, + <IMX_LPCG_CLK_6>; + clock-output-names = "eqos_ptp", + "eqos_mem_clk", + "eqos_aclk", + "eqos_clk", + "eqos_csr_clk"; + power-domains = <&pd IMX_SC_R_ENET_1>; + }; + + usb2_2_lpcg: clock-controller@5b280000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5b280000 0x10000>; + #clock-cells = <1>; + clock-indices = <IMX_LPCG_CLK_7>; + clocks = <&conn_ipg_clk>; + clock-output-names = "usboh3_2_phy_ipg_clk"; + power-domains = <&pd IMX_SC_R_USB_1_PHY>; + }; + +}; + +&enet0_lpcg { + clocks = <&conn_enet0_root_clk>, + <&conn_enet0_root_clk>, + <&conn_axi_clk>, + <&clk IMX_SC_R_ENET_0 IMX_SC_C_TXCLK>, + <&conn_ipg_clk>, + <&conn_ipg_clk>; +}; + +&fec1 { + compatible = "fsl,imx8qm-fec"; + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + assigned-clocks = <&clk IMX_SC_R_ENET_0 IMX_SC_C_CLKDIV>; + assigned-clock-rates = <125000000>; +}; + +&usdhc1 { + compatible = "fsl,imx8dxl-usdhc", "fsl,imx8qxp-usdhc"; + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; +}; + +&usdhc2 { + compatible = "fsl,imx8dxl-usdhc", "fsl,imx8qxp-usdhc"; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; +}; + +&usdhc3 { + compatible = "fsl,imx8dxl-usdhc", "fsl,imx8qxp-usdhc"; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi new file mode 100644 index 000000000000..550f513708d8 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2020 NXP + */ + +&ddr_pmu0 { + compatible = "fsl,imx8-ddr-pmu"; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi new file mode 100644 index 000000000000..815bd987b09b --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi @@ -0,0 +1,74 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019~2020, 2022 NXP + */ + +&lsio_gpio0 { + compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio"; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; +}; + +&lsio_gpio1 { + compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio"; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; +}; + +&lsio_gpio2 { + compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio"; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; +}; + +&lsio_gpio3 { + compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio"; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; +}; + +&lsio_gpio4 { + compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio"; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; +}; + +&lsio_gpio5 { + compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio"; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; +}; + +&lsio_gpio6 { + compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio"; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; +}; + +&lsio_gpio7 { + compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio"; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; +}; + +&lsio_mu0 { + compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; +}; + +&lsio_mu1 { + compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; +}; + +&lsio_mu2 { + compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; +}; + +&lsio_mu3 { + compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; +}; + +&lsio_mu4 { + compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; +}; + +&lsio_mu5 { + compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8dxl.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi new file mode 100644 index 000000000000..5ddbda0b4def --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi @@ -0,0 +1,238 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019~2020, 2022 NXP + */ + +#include <dt-bindings/clock/imx8-clock.h> +#include <dt-bindings/firmware/imx/rsrc.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/pads-imx8dxl.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + ethernet0 = &fec1; + ethernet1 = &eqos; + gpio0 = &lsio_gpio0; + gpio1 = &lsio_gpio1; + gpio2 = &lsio_gpio2; + gpio3 = &lsio_gpio3; + gpio4 = &lsio_gpio4; + gpio5 = &lsio_gpio5; + gpio6 = &lsio_gpio6; + gpio7 = &lsio_gpio7; + mu1 = &lsio_mu1; + }; + + cpus: cpus { + #address-cells = <2>; + #size-cells = <0>; + + /* We have 1 clusters with 2 Cortex-A35 cores */ + A35_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&A35_L2>; + clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>; + #cooling-cells = <2>; + operating-points-v2 = <&a35_opp_table>; + }; + + A35_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x1>; + enable-method = "psci"; + next-level-cache = <&A35_L2>; + clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>; + #cooling-cells = <2>; + operating-points-v2 = <&a35_opp_table>; + }; + + A35_L2: l2-cache0 { + compatible = "cache"; + }; + }; + + a35_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-900000000 { + opp-hz = /bits/ 64 <900000000>; + opp-microvolt = <1000000>; + clock-latency-ns = <150000>; + }; + + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <150000>; + opp-suspend; + }; + }; + + gic: interrupt-controller@51a00000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */ + <0x0 0x51b00000 0 0xc0000>; /* GICR (RD_base + SGI_base) */ + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + dsp_reserved: dsp@92400000 { + reg = <0 0x92400000 0 0x2000000>; + no-map; + }; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + system-controller { + compatible = "fsl,imx-scu"; + mbox-names = "tx0", + "rx0", + "gip3"; + mboxes = <&lsio_mu1 0 0 + &lsio_mu1 1 0 + &lsio_mu1 3 3>; + + pd: power-controller { + compatible = "fsl,scu-pd"; + #power-domain-cells = <1>; + wakeup-irq = <160 163 235 236 237 228 229 230 231 238 + 239 240 166 169>; + }; + + clk: clock-controller { + compatible = "fsl,imx8dxl-clk", "fsl,scu-clk"; + #clock-cells = <2>; + clocks = <&xtal32k &xtal24m>; + clock-names = "xtal_32KHz", "xtal_24Mhz"; + }; + + iomuxc: pinctrl { + compatible = "fsl,imx8dxl-iomuxc"; + }; + + ocotp: ocotp { + compatible = "fsl,imx8qxp-scu-ocotp"; + #address-cells = <1>; + #size-cells = <1>; + + fec_mac0: mac@2c4 { + reg = <0x2c4 6>; + }; + + fec_mac1: mac@2c6 { + reg = <0x2c6 6>; + }; + }; + + rtc: rtc { + compatible = "fsl,imx8qxp-sc-rtc"; + }; + + sc_pwrkey: keys { + compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key"; + linux,keycode = <KEY_POWER>; + wakeup-source; + }; + + watchdog { + compatible = "fsl,imx-sc-wdt"; + timeout-sec = <60>; + }; + + tsens: thermal-sensor { + compatible = "fsl,imx-sc-thermal"; + #thermal-sensor-cells = <1>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */ + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non-Secure */ + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */ + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */ + }; + + thermal_zones: thermal-zones { + cpu-thermal0 { + polling-delay-passive = <250>; + polling-delay = <2000>; + thermal-sensors = <&tsens IMX_SC_R_SYSTEM>; + + trips { + cpu_alert0: trip0 { + temperature = <107000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit0: trip1 { + temperature = <127000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = + <&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + + /* The two values below cannot be changed by the board */ + xtal32k: clock-xtal32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "xtal_32KHz"; + }; + + xtal24m: clock-xtal24m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "xtal_24MHz"; + }; + + /* sorted in register address */ + #include "imx8-ss-adma.dtsi" + #include "imx8-ss-conn.dtsi" + #include "imx8-ss-ddr.dtsi" + #include "imx8-ss-lsio.dtsi" +}; + +#include "imx8dxl-ss-adma.dtsi" +#include "imx8dxl-ss-conn.dtsi" +#include "imx8dxl-ss-lsio.dtsi" +#include "imx8dxl-ss-ddr.dtsi" diff --git a/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm.dtsi index 9e6170d9394e..def7bb5d37cf 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm.dtsi @@ -2,7 +2,7 @@ /* * Copyright (c) 2018 NXP * Copyright (c) 2019 Engicam srl - * Copyright (c) 2020 Amarula Solutons(India) + * Copyright (c) 2020 Amarula Solutions(India) */ / { diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts new file mode 100644 index 000000000000..8b16bd68576c --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts @@ -0,0 +1,376 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2022 Kontron Electronics GmbH + */ + +/dts-v1/; + +#include "imx8mm-kontron-osm-s.dtsi" + +/ { + model = "Kontron BL i.MX8MM OSM-S (N802X S)"; + compatible = "kontron,imx8mm-bl-osm-s", "kontron,imx8mm-osm-s", "fsl,imx8mm"; + + aliases { + ethernet1 = &usbnet; + }; + + /* fixed crystal dedicated to mcp2542fd */ + osc_can: clock-osc-can { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <40000000>; + clock-output-names = "osc-can"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_led>; + + led1 { + label = "led1"; + gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + + led2 { + label = "led2"; + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + }; + + led3 { + label = "led3"; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + }; + }; + + pwm-beeper { + compatible = "pwm-beeper"; + pwms = <&pwm2 0 5000 0>; + }; + + reg_rst_eth2: regulator-rst-eth2 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_eth2>; + gpio = <&gpio3 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + regulator-name = "rst-usb-eth2"; + }; + + reg_usb1_vbus: regulator-usb1-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb1_vbus>; + gpio = <&gpio3 25 GPIO_ACTIVE_LOW>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "usb1-vbus"; + }; + + reg_vdd_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vdd-5v"; + }; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + status = "okay"; + + can@0 { + compatible = "microchip,mcp251xfd"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can>; + clocks = <&osc_can>; + interrupts-extended = <&gpio4 28 IRQ_TYPE_LEVEL_LOW>; + /* + * Limit the SPI clock to 15 MHz to prevent issues + * with corrupted data due to chip errata. + */ + spi-max-frequency = <15000000>; + vdd-supply = <®_vdd_3v3>; + xceiver-supply = <®_vdd_5v>; + }; +}; + +&ecspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>; + status = "okay"; + + eeram@0 { + compatible = "microchip,48l640"; + reg = <0>; + spi-max-frequency = <20000000>; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-connection-type = "rgmii-rxid"; + phy-handle = <ðphy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@0 { + reg = <0>; + reset-assert-us = <1>; + reset-deassert-us = <15000>; + reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gpio1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio1>; + gpio-line-names = "", "", "", "dio1-out", "", "", "dio1-in", "dio2-out", + "dio2-in", "dio3-out", "dio3-in", "dio4-out", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio5>; + gpio-line-names = "", "", "dio4-in", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + uart-has-rtscts; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + linux,rs485-enabled-at-boot-time; + uart-has-rtscts; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "otg"; + disable-over-current; + vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + usb1@1 { + compatible = "usb424,9514"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + usbnet: ethernet@1 { + compatible = "usb424,ec00"; + reg = <1>; + local-mac-address = [ 00 00 00 00 00 00 ]; + }; + }; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + vmmc-supply = <®_vdd_3v3>; + vqmmc-supply = <®_nvcc_sd>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&iomuxc { + pinctrl_can: cangrp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x19 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x82 + MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x82 + MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x82 + MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x19 + >; + }; + + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO 0x82 + MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI 0x82 + MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK 0x82 + MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25 0x19 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x19 /* PHY RST */ + MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x19 /* ETH IRQ */ + >; + }; + + pinctrl_gpio_led: gpioledgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x19 + MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x19 + MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x19 + >; + }; + + pinctrl_gpio1: gpio1grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x19 + MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x19 + MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19 + MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x19 + MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x19 + MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x19 + MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x19 + >; + }; + + pinctrl_gpio5: gpio5grp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2 0x19 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3 + MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT 0x19 + >; + }; + + pinctrl_reg_usb1_vbus: regusb1vbusgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x19 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x140 + MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x140 + MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B 0x140 + MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B 0x140 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x140 + MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x140 + MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x140 + MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x140 + >; + }; + + pinctrl_usb_eth2: usbeth2grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2 0x19 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts index 23be1ec538ba..a079322a3793 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts @@ -5,11 +5,11 @@ /dts-v1/; -#include "imx8mm-kontron-n801x-som.dtsi" +#include "imx8mm-kontron-sl.dtsi" / { - model = "Kontron i.MX8MM N801X S"; - compatible = "kontron,imx8mm-n801x-s", "kontron,imx8mm-n801x-som", "fsl,imx8mm"; + model = "Kontron BL i.MX8MM (N801X S)"; + compatible = "kontron,imx8mm-bl", "kontron,imx8mm-sl", "fsl,imx8mm"; aliases { ethernet1 = &usbnet; @@ -321,6 +321,7 @@ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 >; }; @@ -333,6 +334,7 @@ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 >; }; @@ -345,6 +347,7 @@ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 >; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi new file mode 100644 index 000000000000..8d10f5b41297 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi @@ -0,0 +1,330 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2022 Kontron Electronics GmbH + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include "imx8mm.dtsi" + +/ { + model = "Kontron OSM-S i.MX8MM (N802X SOM)"; + compatible = "kontron,imx8mm-osm-s", "fsl,imx8mm"; + + memory@40000000 { + device_type = "memory"; + /* + * There are multiple SoM flavors with different DDR sizes. + * The smallest is 1GB. For larger sizes the bootloader will + * update the reg property. + */ + reg = <0x0 0x40000000 0 0x80000000>; + }; + + chosen { + stdout-path = &uart3; + }; +}; + +&A53_0 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_1 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_2 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_3 { + cpu-supply = <®_vdd_arm>; +}; + +&ddrc { + operating-points-v2 = <&ddrc_opp_table>; + + ddrc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100M { + opp-hz = /bits/ 64 <100000000>; + }; + + opp-750M { + opp-hz = /bits/ 64 <750000000>; + }; + }; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + status = "okay"; + + flash@0 { + compatible = "mxicy,mx25r1635f", "jedec,spi-nor"; + spi-max-frequency = <80000000>; + reg = <0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x1e0000>; + }; + + partition@1e0000 { + label = "env"; + reg = <0x1e0000 0x10000>; + }; + + partition@1f0000 { + label = "env_redundant"; + reg = <0x1f0000 0x10000>; + }; + }; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pca9450: pmic@25 { + compatible = "nxp,pca9450a"; + reg = <0x25>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + + regulators { + reg_vdd_soc: BUCK1 { + regulator-name = "+0V8_VDD_SOC (BUCK1)"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + nxp,dvs-run-voltage = <850000>; + nxp,dvs-standby-voltage = <800000>; + }; + + reg_vdd_arm: BUCK2 { + regulator-name = "+0V9_VDD_ARM (BUCK2)"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <950000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + nxp,dvs-run-voltage = <950000>; + nxp,dvs-standby-voltage = <850000>; + }; + + reg_vdd_dram: BUCK3 { + regulator-name = "+0V9_VDD_DRAM&PU (BUCK3)"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <950000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vdd_3v3: BUCK4 { + regulator-name = "+3V3 (BUCK4)"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vdd_1v8: BUCK5 { + regulator-name = "+1V8 (BUCK5)"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_nvcc_dram: BUCK6 { + regulator-name = "+1V1_NVCC_DRAM (BUCK6)"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_nvcc_snvs: LDO1 { + regulator-name = "+1V8_NVCC_SNVS (LDO1)"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vdd_snvs: LDO2 { + regulator-name = "+0V8_VDD_SNVS (LDO2)"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vdda: LDO3 { + regulator-name = "+1V8_VDDA (LDO3)"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vdd_phy: LDO4 { + regulator-name = "+0V9_VDD_PHY (LDO4)"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_nvcc_sd: LDO5 { + regulator-name = "NVCC_SD (LDO5)"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; + + rtc@52 { + compatible = "microcrystal,rv3028"; + reg = <0x52>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + interrupts-extended = <&gpio4 1 IRQ_TYPE_LEVEL_HIGH>; + trickle-diode-disable; + }; +}; + +&uart3 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + vmmc-supply = <®_vdd_3v3>; + vqmmc-supply = <®_vdd_1v8>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x82 + MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x82 + MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x82 + MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x19 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x141 + >; + }; + + pinctrl_rtc: rtcgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1 0x19 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140 + MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0 + MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d0 + MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d0 + MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d0 + MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d0 + MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x019 + MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x190 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x194 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d4 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d4 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d4 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d4 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d4 + MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d4 + MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d4 + MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d4 + MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d4 + MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x019 + MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x194 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x196 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d6 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d6 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d6 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d6 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d6 + MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d6 + MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d6 + MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d6 + MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d6 + MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x019 + MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi index 8f90eb02550d..0679728d2489 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi @@ -6,8 +6,8 @@ #include "imx8mm.dtsi" / { - model = "Kontron i.MX8MM N801X SoM"; - compatible = "kontron,imx8mm-n801x-som", "fsl,imx8mm"; + model = "Kontron SL i.MX8MM (N801X SOM)"; + compatible = "kontron,imx8mm-sl", "fsl,imx8mm"; memory@40000000 { device_type = "memory"; @@ -46,10 +46,6 @@ ddrc_opp_table: opp-table { compatible = "operating-points-v2"; - opp-25M { - opp-hz = /bits/ 64 <25000000>; - }; - opp-100M { opp-hz = /bits/ 64 <100000000>; }; @@ -70,6 +66,27 @@ compatible = "mxicy,mx25r1635f", "jedec,spi-nor"; spi-max-frequency = <80000000>; reg = <0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x1e0000>; + }; + + partition@1e0000 { + label = "env"; + reg = <0x1e0000 0x10000>; + }; + + partition@1f0000 { + label = "env_redundant"; + reg = <0x1f0000 0x10000>; + }; + }; }; }; @@ -86,11 +103,10 @@ pinctrl-0 = <&pinctrl_pmic>; interrupt-parent = <&gpio1>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; regulators { reg_vdd_soc: BUCK1 { - regulator-name = "buck1"; + regulator-name = "+0V8_VDD_SOC (BUCK1)"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <850000>; regulator-boot-on; @@ -101,7 +117,7 @@ }; reg_vdd_arm: BUCK2 { - regulator-name = "buck2"; + regulator-name = "+0V9_VDD_ARM (BUCK2)"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <950000>; regulator-boot-on; @@ -112,7 +128,7 @@ }; reg_vdd_dram: BUCK3 { - regulator-name = "buck3"; + regulator-name = "+0V9_VDD_DRAM&PU (BUCK3)"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <950000>; regulator-boot-on; @@ -120,7 +136,7 @@ }; reg_vdd_3v3: BUCK4 { - regulator-name = "buck4"; + regulator-name = "+3V3 (BUCK4)"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-boot-on; @@ -128,7 +144,7 @@ }; reg_vdd_1v8: BUCK5 { - regulator-name = "buck5"; + regulator-name = "+1V8 (BUCK5)"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-boot-on; @@ -136,7 +152,7 @@ }; reg_nvcc_dram: BUCK6 { - regulator-name = "buck6"; + regulator-name = "+1V1_NVCC_DRAM (BUCK6)"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; regulator-boot-on; @@ -144,7 +160,7 @@ }; reg_nvcc_snvs: LDO1 { - regulator-name = "ldo1"; + regulator-name = "+1V8_NVCC_SNVS (LDO1)"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-boot-on; @@ -152,7 +168,7 @@ }; reg_vdd_snvs: LDO2 { - regulator-name = "ldo2"; + regulator-name = "+0V8_VDD_SNVS (LDO2)"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <900000>; regulator-boot-on; @@ -160,7 +176,7 @@ }; reg_vdda: LDO3 { - regulator-name = "ldo3"; + regulator-name = "+1V8_VDDA (LDO3)"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-boot-on; @@ -168,7 +184,7 @@ }; reg_vdd_phy: LDO4 { - regulator-name = "ldo4"; + regulator-name = "+0V9_VDD_PHY (LDO4)"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <900000>; regulator-boot-on; @@ -176,7 +192,7 @@ }; reg_nvcc_sd: LDO5 { - regulator-name = "ldo5"; + regulator-name = "NVCC_SD (LDO5)"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; }; @@ -229,7 +245,6 @@ pinctrl_pmic: pmicgrp { fsl,pins = < MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x141 - MX8MM_IOMUXC_GPIO1_IO04_GPIO1_IO4 0x141 >; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts b/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts index c97f4e06ae5f..32f6f2f50c10 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts @@ -152,11 +152,11 @@ * CPLD_reset is RESET_SOFT in schematic */ gpio-line-names = - "CPLD_D[1]", "CPLD_int", "CPLD_reset", "", - "", "CPLD_D[0]", "", "", - "", "", "", "CPLD_D[2]", - "CPLD_D[3]", "CPLD_D[4]", "CPLD_D[5]", "CPLD_D[6]", - "CPLD_D[7]", "", "", "", + "CPLD_D[6]", "CPLD_int", "CPLD_reset", "", + "", "CPLD_D[7]", "", "", + "", "", "", "CPLD_D[5]", + "CPLD_D[4]", "CPLD_D[3]", "CPLD_D[2]", "CPLD_D[1]", + "CPLD_D[0]", "", "", "", "", "", "", "", "", "", "", "KBD_intK", "", "", "", ""; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts index 286d2df01cfa..7e0aeb2db305 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts @@ -5,7 +5,6 @@ /dts-v1/; -#include <dt-bindings/phy/phy-imx8-pcie.h> #include "imx8mm-tqma8mqml.dtsi" #include "mba8mx.dtsi" diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi index 16ee9b5179e6..f649dfacb4b6 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi @@ -3,6 +3,7 @@ * Copyright 2020-2021 TQ-Systems GmbH */ +#include <dt-bindings/phy/phy-imx8-pcie.h> #include "imx8mm.dtsi" / { diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x.dts index b1e7540f0281..641be3af989d 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x.dts @@ -17,4 +17,3 @@ stdout-path = &uart2; }; }; - diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts index 35fb929e7bcc..d3ee6fc4baab 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts @@ -626,24 +626,28 @@ lan1: port@0 { reg = <0>; label = "lan1"; + phy-mode = "internal"; local-mac-address = [00 00 00 00 00 00]; }; lan2: port@1 { reg = <1>; label = "lan2"; + phy-mode = "internal"; local-mac-address = [00 00 00 00 00 00]; }; lan3: port@2 { reg = <2>; label = "lan3"; + phy-mode = "internal"; local-mac-address = [00 00 00 00 00 00]; }; lan4: port@3 { reg = <3>; label = "lan4"; + phy-mode = "internal"; local-mac-address = [00 00 00 00 00 00]; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts index 6dc5eda2d256..31f4c735fe4f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts @@ -222,7 +222,6 @@ compatible = "microchip,mcp2515"; reg = <0>; clocks = <&can20m>; - oscillator-frequency = <20000000>; interrupt-parent = <&gpio2>; interrupts = <3 IRQ_TYPE_LEVEL_LOW>; spi-max-frequency = <10000000>; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts index a65761a53f23..19f6d2943d26 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts @@ -250,7 +250,7 @@ }; &gpio2 { - gpio-line-names = "dig2_in", "dig2_out#", "", "", "", "", "", "", + gpio-line-names = "dig2_in", "dig2_out#", "dig2_ctl", "", "", "", "dig1_ctl", "", "dig1_out#", "dig1_in", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", ""; @@ -630,6 +630,8 @@ MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x40000041 /* RS232# */ MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9 0x40000041 /* DIG1_IN */ MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8 0x40000041 /* DIG1_OUT */ + MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6 0x40000041 /* DIG1_CTL */ + MX8MM_IOMUXC_SD1_DATA0_GPIO2_IO2 0x40000041 /* DIG2_CTL */ MX8MM_IOMUXC_SD1_CLK_GPIO2_IO0 0x40000041 /* DIG2_IN */ MX8MM_IOMUXC_SD1_CMD_GPIO2_IO1 0x40000041 /* DIG2_OUT */ MX8MM_IOMUXC_ECSPI1_MOSI_GPIO5_IO7 0x40000041 /* SIM1DET# */ diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts new file mode 100644 index 000000000000..a67771d02146 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts @@ -0,0 +1,888 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Gateworks Corporation + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/phy/phy-imx8-pcie.h> + +#include "imx8mm.dtsi" + +/ { + model = "Gateworks Venice GW7904 i.MX8MM board"; + compatible = "gateworks,imx8mm-gw7904", "fsl,imx8mm"; + + chosen { + stdout-path = &uart2; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x80000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-0 { + label = "user_pb"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + linux,code = <BTN_0>; + }; + + key-1 { + label = "user_pb1x"; + linux,code = <BTN_1>; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key-2 { + label = "key_erased"; + linux,code = <BTN_2>; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + key-3 { + label = "eeprom_wp"; + linux,code = <BTN_3>; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + key-4 { + label = "switch_hold"; + linux,code = <BTN_5>; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + + led-controller { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led-0 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + label = "led01_grn"; + gpios = <&gpioled 0 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-1 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_YELLOW>; + label = "led01_yel"; + gpios = <&gpioled 1 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-2 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + label = "led02_grn"; + gpios = <&gpioled 2 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-3 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_YELLOW>; + label = "led02_yel"; + gpios = <&gpioled 3 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-4 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + label = "led03_grn"; + gpios = <&gpioled 4 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-5 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_YELLOW>; + label = "led03_yel"; + gpios = <&gpioled 5 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-6 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + label = "led04_grn"; + gpios = <&gpioled 6 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-7 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_YELLOW>; + label = "led04_yel"; + gpios = <&gpioled 7 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-8 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + label = "led05_grn"; + gpios = <&gpioled 8 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-9 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_YELLOW>; + label = "led05_yel"; + gpios = <&gpioled 9 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-10 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + label = "led06_grn"; + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-11 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + label = "led06_red"; + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-12 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + label = "led07_grn"; + gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-13 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + label = "led07_red"; + gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-14 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + label = "led08_grn"; + gpios = <&gpioled 10 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-15 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_YELLOW>; + label = "led08_yel"; + gpios = <&gpioled 11 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-16 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + label = "led09_grn"; + gpios = <&gpioled 12 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-17 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_YELLOW>; + label = "led09_yel"; + gpios = <&gpioled 13 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-18 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + label = "led10_grn"; + gpios = <&gpioled 14 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-19 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_YELLOW>; + label = "led10_yel"; + gpios = <&gpioled 15 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + + pcie0_refclk: pcie0-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; +}; + +&A53_0 { + cpu-supply = <&buck2>; +}; + +&A53_1 { + cpu-supply = <&buck2>; +}; + +&A53_2 { + cpu-supply = <&buck2>; +}; + +&A53_3 { + cpu-supply = <&buck2>; +}; + +&ddrc { + operating-points-v2 = <&ddrc_opp_table>; + + ddrc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-25M { + opp-hz = /bits/ 64 <25000000>; + }; + + opp-100M { + opp-hz = /bits/ 64 <100000000>; + }; + + opp-750M { + opp-hz = /bits/ 64 <750000000>; + }; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + local-mac-address = [00 00 00 00 00 00]; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + }; +}; + +&gpio1 { + gpio-line-names = "", "", "", "", "", "", "", "", + "", "", "", "", "rs232_en#", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio5 { + gpio-line-names = "", "", "", "", "", "", "", "", + "", "", "", "", "pci_wdis#", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + pinctrl-0 = <&pinctrl_gsc>; + interrupt-parent = <&gpio4>; + interrupts = <26 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <1>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@6 { + gw,mode = <0>; + reg = <0x06>; + label = "temp"; + }; + + channel@82 { + gw,mode = <2>; + reg = <0x82>; + label = "vin"; + gw,voltage-divider-ohms = <22100 1000>; + gw,voltage-offset-microvolt = <700000>; + }; + + channel@84 { + gw,mode = <2>; + reg = <0x84>; + label = "vdd_5p0"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@86 { + gw,mode = <2>; + reg = <0x86>; + label = "vdd_3p3"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@88 { + gw,mode = <2>; + reg = <0x88>; + label = "vdd_0p9"; + }; + + channel@8c { + gw,mode = <2>; + reg = <0x8c>; + label = "vdd_soc"; + }; + + channel@8e { + gw,mode = <2>; + reg = <0x8e>; + label = "vdd_arm"; + }; + + channel@90 { + gw,mode = <2>; + reg = <0x90>; + label = "vdd_1p8"; + }; + + channel@92 { + gw,mode = <2>; + reg = <0x92>; + label = "vdd_dram"; + }; + + channel@a2 { + gw,mode = <2>; + reg = <0xa2>; + label = "vdd_gsc"; + gw,voltage-divider-ohms = <10000 10000>; + }; + }; + }; + + gpio: gpio@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; + }; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + eeprom@51 { + compatible = "atmel,24c02"; + reg = <0x51>; + pagesize = <16>; + }; + + eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + pagesize = <16>; + }; + + eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + }; + + rtc@68 { + compatible = "dallas,ds1672"; + reg = <0x68>; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + pmic@4b { + compatible = "rohm,bd71847"; + reg = <0x4b>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio3>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + rohm,reset-snvs-powered; + #clock-cells = <0>; + clocks = <&osc_32k 0>; + clock-output-names = "clk-32k-out"; + + regulators { + /* vdd_soc: 0.805-0.900V (typ=0.8V) */ + BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + }; + + /* vdd_arm: 0.805-1.0V (typ=0.9V) */ + buck2: BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1000000>; + rohm,dvs-idle-voltage = <900000>; + }; + + /* vdd_0p9: 0.805-1.0V (typ=0.9V) */ + BUCK3 { + regulator-name = "buck3"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vdd_3p3 */ + BUCK4 { + regulator-name = "buck4"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vdd_1p8 */ + BUCK5 { + regulator-name = "buck5"; + regulator-min-microvolt = <1605000>; + regulator-max-microvolt = <1995000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vdd_dram */ + BUCK6 { + regulator-name = "buck6"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + regulator-always-on; + }; + + /* nvcc_snvs_1p8 */ + LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <1900000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vdd_snvs_0p8 */ + LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vdda_1p8 */ + LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + LDO4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + LDO6 { + regulator-name = "ldo6"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + accelerometer@19 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_accel>; + compatible = "st,lis2de12"; + reg = <0x19>; + st,drdy-int-pin = <1>; + interrupt-parent = <&gpio1>; + interrupts = <15 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "INT1"; + }; +}; + +&i2c4 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; + + gpioled: gpio@27 { + compatible = "nxp,pca9555"; + reg = <0x27>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&pcie_phy { + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>; + fsl,clkreq-unsupported; + clocks = <&pcie0_refclk>; + clock-names = "ref"; + status = "okay"; +}; + +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0>; + reset-gpio = <&gpio5 11 GPIO_ACTIVE_LOW>; + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>, + <&pcie0_refclk>; + clock-names = "pcie", "pcie_aux", "pcie_bus"; + assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, + <&clk IMX8MM_CLK_PCIE1_CTRL>; + assigned-clock-rates = <10000000>, <250000000>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>, + <&clk IMX8MM_SYS_PLL2_250M>; + status = "okay"; +}; + +&pgc_mipi { + status = "disabled"; +}; + +/* off-board RS232 */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +/* console */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +/* off-board RS232 */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +/* microSD */ +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + bus-width = <4>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +/* eMMC */ +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x40000041 /* RS232# */ + MX8MM_IOMUXC_ECSPI2_MISO_GPIO5_IO12 0x40000041 /* PCI_WDIS# */ + >; + }; + + pinctrl_accel: accelgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x159 + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MM_IOMUXC_SAI2_TXFS_GPIO4_IO24 0x19 /* IRQ# */ + MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25 0x19 /* RST# */ + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x40000019 + MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x40000019 + MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x40000019 + MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x40000019 + >; + }; + + pinctrl_gsc: gscgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI2_TXD0_GPIO4_IO26 0x159 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3 + MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3 + MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3 + MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3 + >; + }; + + pinctrl_pcie0: pciegrp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI2_MOSI_GPIO5_IO11 0x41 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_DATA02_GPIO3_IO8 0x41 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140 + MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 + MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140 + MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2-gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x1c4 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi index d1b4582f44c4..bcab830c6e95 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi @@ -32,10 +32,10 @@ }; /* Fixed clock dedicated to SPI CAN controller */ - clk20m: oscillator { + clk40m: oscillator { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <20000000>; + clock-frequency = <40000000>; }; gpio-keys { @@ -53,6 +53,21 @@ }; }; + hdmi_connector: hdmi-connector { + compatible = "hdmi-connector"; + ddc-i2c-bus = <&i2c2>; + label = "hdmi"; + type = "a"; + status = "disabled"; + }; + + panel_lvds: panel-lvds { + compatible = "panel-lvds"; + backlight = <&backlight>; + data-mapping = "vesa-24"; + status = "disabled"; + }; + /* Carrier Board Supplies */ reg_1p8v: regulator-1p8v { compatible = "regulator-fixed"; @@ -202,8 +217,8 @@ can1: can@0 { compatible = "microchip,mcp251xfd"; - clocks = <&clk20m>; - interrupts-extended = <&gpio1 6 IRQ_TYPE_EDGE_FALLING>; + clocks = <&clk40m>; + interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_can1_int>; reg = <0>; @@ -367,8 +382,8 @@ nxp,dvs-standby-voltage = <850000>; regulator-always-on; regulator-boot-on; - regulator-max-microvolt = <950000>; - regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1050000>; + regulator-min-microvolt = <805000>; regulator-name = "On-module +VDD_ARM (BUCK2)"; regulator-ramp-delay = <3125>; }; @@ -376,8 +391,8 @@ reg_vdd_dram: BUCK3 { regulator-always-on; regulator-boot-on; - regulator-max-microvolt = <950000>; - regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1000000>; + regulator-min-microvolt = <805000>; regulator-name = "On-module +VDD_GPU_VPU_DDR (BUCK3)"; }; @@ -416,7 +431,7 @@ reg_vdd_snvs: LDO2 { regulator-always-on; regulator-boot-on; - regulator-max-microvolt = <900000>; + regulator-max-microvolt = <800000>; regulator-min-microvolt = <800000>; regulator-name = "On-module +V0.8_SNVS (LDO2)"; }; @@ -561,8 +576,8 @@ status = "disabled"; }; - lvds_ti_sn65dsi83: bridge@2c { - compatible = "ti,sn65dsi83"; + lvds_ti_sn65dsi84: bridge@2c { + compatible = "ti,sn65dsi84"; /* Verdin GPIO_9_DSI (SN65DSI84 IRQ, SODIMM 17, unused) */ /* Verdin GPIO_10_DSI (SODIMM 21) */ enable-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>; @@ -603,7 +618,7 @@ pinctrl-0 = <&pinctrl_gpio_9_dsi>, <&pinctrl_i2s_2_bclk_touch_reset>; reg = <0x4a>; /* Verdin I2S_2_BCLK (TOUCH_RESET#, SODIMM 42) */ - reset-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; status = "disabled"; }; @@ -745,6 +760,7 @@ }; &usbphynop2 { + power-domains = <&pgc_otg2>; vcc-supply = <®_vdd_3v3>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts index 636f8602b979..dd4302ac1de4 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts @@ -213,7 +213,6 @@ compatible = "microchip,mcp2515"; reg = <0>; clocks = <&can20m>; - oscillator-frequency = <20000000>; interrupt-parent = <&gpio2>; interrupts = <3 IRQ_TYPE_LEVEL_LOW>; spi-max-frequency = <10000000>; diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi index 0c71b740a316..cb2836bfbd95 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi @@ -672,7 +672,6 @@ <&clk IMX8MN_CLK_GPU_SHADER>, <&clk IMX8MN_CLK_GPU_BUS_ROOT>, <&clk IMX8MN_CLK_GPU_AHB>; - resets = <&src IMX8MQ_RESET_GPU_RESET>; }; pgc_dispmix: power-domain@3 { diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts index 2ca2ede2e94e..382fbedaf6ba 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts @@ -1,18 +1,23 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2022 Marek Vasut <marex@denx.de> + * + * DHCOM iMX8MP variant: + * DHCM-iMX8ML8-C160-R409-F1638-SPI16-GE-CAN2-SD-RTC-WBTA-ADC-T-RGB-CSI2-HS-I-01D2 + * DHCOM PCB number: 660-100 or newer + * PDK2 PCB number: 516-400 or newer */ /dts-v1/; #include <dt-bindings/leds/common.h> -#include <dt-bindings/net/qca-ar803x.h> #include <dt-bindings/phy/phy-imx8-pcie.h> #include "imx8mp-dhcom-som.dtsi" / { model = "DH electronics i.MX8M Plus DHCOM Premium Developer Kit (2)"; - compatible = "dh,imx8mp-dhcom-pdk2", "fsl,imx8mp"; + compatible = "dh,imx8mp-dhcom-pdk2", "dh,imx8mp-dhcom-som", + "fsl,imx8mp"; chosen { stdout-path = &uart1; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi index a616eb378002..0f13ee362771 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi @@ -70,7 +70,7 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + cs-gpios = <&gpio5 17 GPIO_ACTIVE_LOW>; status = "disabled"; }; @@ -403,8 +403,8 @@ pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c5>; pinctrl-1 = <&pinctrl_i2c5_gpio>; - scl-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - sda-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio3 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio3 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; }; @@ -648,10 +648,10 @@ pinctrl_ecspi1: dhcom-ecspi1-grp { fsl,pins = < - MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK 0x44 - MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI 0x44 - MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO 0x44 - MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09 0x40 + MX8MP_IOMUXC_I2C1_SCL__ECSPI1_SCLK 0x44 + MX8MP_IOMUXC_I2C1_SDA__ECSPI1_MOSI 0x44 + MX8MP_IOMUXC_I2C2_SCL__ECSPI1_MISO 0x44 + MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 0x40 >; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts index f6b017ab5f53..9f1469db554d 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts @@ -5,6 +5,7 @@ /dts-v1/; +#include <dt-bindings/phy/phy-imx8-pcie.h> #include "imx8mp.dtsi" / { @@ -33,6 +34,12 @@ <0x1 0x00000000 0 0xc0000000>; }; + pcie0_refclk: pcie0-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + reg_can1_stby: regulator-can1-stby { compatible = "regulator-fixed"; regulator-name = "can1-stby"; @@ -55,6 +62,17 @@ enable-active-high; }; + reg_pcie0: regulator-pcie { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0_reg>; + regulator-name = "MPCIE_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + reg_usdhc2_vmmc: regulator-usdhc2 { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -350,6 +368,28 @@ */ }; +&pcie_phy { + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>; + clocks = <&pcie0_refclk>; + clock-names = "ref"; + status = "okay"; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0>; + reset-gpio = <&gpio2 7 GPIO_ACTIVE_LOW>; + clocks = <&clk IMX8MP_CLK_HSIO_ROOT>, + <&clk IMX8MP_CLK_PCIE_ROOT>, + <&clk IMX8MP_CLK_HSIO_AXI>; + clock-names = "pcie", "pcie_aux", "pcie_bus"; + assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>; + assigned-clock-rates = <10000000>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>; + vpcie-supply = <®_pcie0>; + status = "okay"; +}; + &snvs_pwrkey { status = "okay"; }; @@ -502,6 +542,19 @@ >; }; + pinctrl_pcie0: pcie0grp { + fsl,pins = < + MX8MP_IOMUXC_I2C4_SCL__PCIE_CLKREQ_B 0x61 /* open drain, pull up */ + MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07 0x41 + >; + }; + + pinctrl_pcie0_reg: pcie0reggrp { + fsl,pins = < + MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06 0x41 + >; + }; + pinctrl_pmic: pmicgrp { fsl,pins = < MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x000001c0 diff --git a/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp-edimm2.2.dts b/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp-edimm2.2.dts index dd703b6a5e17..a02b31c42db4 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp-edimm2.2.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp-edimm2.2.dts @@ -2,7 +2,7 @@ /* * Copyright (c) 2018 NXP * Copyright (c) 2019 Engicam srl - * Copyright (c) 2020 Amarula Solutons(India) + * Copyright (c) 2020 Amarula Solutions(India) */ /dts-v1/; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp.dtsi index 5116079cce22..a6319824ea2e 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp.dtsi @@ -2,7 +2,7 @@ /* * Copyright (c) 2018 NXP * Copyright (c) 2019 Engicam srl - * Copyright (c) 2020 Amarula Solutons(India) + * Copyright (c) 2020 Amarula Solutions(India) */ / { diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-14N0600E.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-14N0600E.dtsi new file mode 100644 index 000000000000..2f5cc013e8d6 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-14N0600E.dtsi @@ -0,0 +1,68 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2022 Avnet Embedded GmbH + */ +/dts-v1/; + +#include "imx8mp-msc-sm2s.dtsi" + +/ { + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x80000000>; /* bank0, 2GiB */ + }; +}; + +&cpu_alert0 { + temperature = <95000>; +}; + +&cpu_crit0 { + temperature = <105000>; +}; + +&soc_alert0 { + temperature = <95000>; +}; + +&soc_crit0 { + temperature = <105000>; +}; + +&tca6424 { + gbe0-int-hog { + gpio-hog; + input; + gpios = <3 GPIO_ACTIVE_LOW>; + }; + + gbe1-int-hog { + gpio-hog; + input; + gpios = <4 GPIO_ACTIVE_LOW>; + }; + + cam2-rst-hog { + gpio-hog; + output-high; + gpios = <9 GPIO_ACTIVE_LOW>; + }; + + cam2-pwr-hog { + gpio-hog; + output-high; + gpios = <10 GPIO_ACTIVE_LOW>; + }; + + tpm-int-hog { + gpio-hog; + input; + gpios = <13 GPIO_ACTIVE_LOW>; + }; + + wifi-int-hog { + gpio-hog; + input; + gpios = <14 GPIO_ACTIVE_LOW>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts new file mode 100644 index 000000000000..470ff8e31e32 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts @@ -0,0 +1,52 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2022 Avnet Embedded GmbH + */ + +/dts-v1/; + +#include "imx8mp-msc-sm2s-14N0600E.dtsi" +#include <dt-bindings/clock/imx8mp-clock.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "MSC SM2-MB-EP1 Carrier Board with SM2S-IMX8PLUS-QC6-14N0600E SoM"; + compatible = "avnet,sm2s-imx8mp-14N0600E-ep1", + "avnet,sm2s-imx8mp-14N0600E", "avnet,sm2s-imx8mp", + "fsl,imx8mp"; +}; + +&flexcan1 { + status = "okay"; +}; + +&flexcan2 { + status = "okay"; +}; + +&usdhc2 { + no-1-8-v; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_smarc_gpio>; + + pinctrl_smarc_gpio: smarcgpiosgrp { + fsl,pins = + <MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x19>, /* GPIO0 */ + <MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01 0x19>, /* GPIO1 */ + <MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x19>, /* GPIO2 */ + <MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03 0x19>, /* GPIO3 */ + <MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0x19>, /* GPIO4 */ + <MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02 0x19>, /* GPIO5 */ + <MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x19>, /* GPIO6 */ + <MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x19>, /* GPIO7 */ + <MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20 0x19>, /* GPIO8 */ + <MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21 0x19>, /* GPIO9 */ + <MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x19>, /* GPIO10 */ + <MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x19>, /* GPIO11 */ + <MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19 0x19>, /* GPIO12 */ + <MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00 0x19>; /* GPIO13 */ + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s.dtsi new file mode 100644 index 000000000000..5dbec71747c3 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s.dtsi @@ -0,0 +1,820 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2022 Avnet Embedded GmbH + */ + +/dts-v1/; + +#include "imx8mp.dtsi" +#include <dt-bindings/net/ti-dp83867.h> + +/ { + aliases { + rtc0 = &sys_rtc; + rtc1 = &snvs_rtc; + }; + + chosen { + stdout-path = &uart2; + }; + + reg_usb0_host_vbus: regulator-usb0-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb0_host_vbus"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_vbus>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb1_host_vbus: regulator-usb1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb1_host_vbus"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1_vbus>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2_vmmc>; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <100>; + off-on-delay-us = <12000>; + }; + + reg_flexcan1_xceiver: regulator-flexcan1 { + compatible = "regulator-fixed"; + regulator-name = "flexcan1-xceiver"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_flexcan2_xceiver: regulator-flexcan2 { + compatible = "regulator-fixed"; + regulator-name = "flexcan2-xceiver"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + lcd0_backlight: backlight-0 { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd0_backlight>; + pwms = <&pwm1 0 100000 0>; + brightness-levels = <0 255>; + num-interpolated-steps = <255>; + default-brightness-level = <255>; + enable-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; + + lcd1_backlight: backlight-1 { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd1_backlight>; + pwms = <&pwm2 0 100000 0>; + brightness-levels = <0 255>; + num-interpolated-steps = <255>; + default-brightness-level = <255>; + enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + status = "okay"; + + led-sw { + label = "sw-led"; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "heartbeat"; + }; + }; + + extcon_usb0: extcon-usb0 { + compatible = "linux,extcon-usb-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_extcon>; + id-gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>; + }; +}; + +&A53_0 { + cpu-supply = <&vcc_arm>; +}; + +&A53_1 { + cpu-supply = <&vcc_arm>; +}; + +&A53_2 { + cpu-supply = <&vcc_arm>; +}; + +&A53_3 { + cpu-supply = <&vcc_arm>; +}; + +&ecspi1 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <0>, <&gpio2 8 GPIO_ACTIVE_LOW>; +}; + +&ecspi2 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <0>, <&gpio2 9 GPIO_ACTIVE_LOW>; +}; + +&eqos { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eqos>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + eee-broken-1000t; + reset-gpios = <&tca6424 16 GPIO_ACTIVE_LOW>; + reset-assert-us = <1000>; + reset-deassert-us = <1000>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy1>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + eee-broken-1000t; + reset-gpios = <&tca6424 17 GPIO_ACTIVE_LOW>; + reset-assert-us = <1000>; + reset-deassert-us = <1000>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + }; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clock-frequency = <400000>; + status = "okay"; + + id_eeprom: eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clock-frequency = <400000>; + status = "disabled"; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + clock-frequency = <400000>; + status = "disabled"; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + clock-frequency = <400000>; + status = "disabled"; +}; + +&i2c5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c5>; + clock-frequency = <400000>; + status = "disabled"; +}; + +&i2c6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c6>; + clock-frequency = <400000>; + status = "okay"; + + tca6424: gpio@22 { + compatible = "ti,tca6424"; + reg = <0x22>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tca6424>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "BOOT_SEL0#", "BOOT_SEL1#", "BOOT_SEL2#", + "gbe0_int", "gbe1_int", "pmic_int", "rtc_int", "lvds_int", + "PCIE_WAKE#", "cam2_rst", "cam2_pwr", "SLEEP#", + "wifi_pd", "tpm_int", "wifi_int", "PCIE_A_RST#", + "gbe0_rst", "gbe1_rst", "LID#", "BATLOW#", "CHARGING#", + "CHARGER_PRSNT#"; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_RISING>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + dsi_lvds_bridge: bridge@2d { + compatible = "ti,sn65dsi83"; + reg = <0x2d>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lvds_bridge>; + enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; + + pmic: pmic@30 { + compatible = "ricoh,rn5t567"; + reg = <0x30>; + interrupt-parent = <&tca6424>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + + regulators { + DCDC1 { + regulator-name = "VCC_SOC"; + regulator-always-on; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <950000>; + }; + + DCDC2 { + regulator-name = "VCC_DRAM"; + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + vcc_arm: DCDC3 { + regulator-name = "VCC_ARM"; + regulator-always-on; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <950000>; + }; + + DCDC4 { + regulator-name = "VCC_1V8"; + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + LDO1 { + regulator-name = "VCC_LDO1_2V5"; + regulator-always-on; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + + LDO2 { + regulator-name = "VCC_LDO2_1V8"; + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + LDO3 { + regulator-name = "VCC_ETH_2V5"; + regulator-always-on; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + + LDO4 { + regulator-name = "VCC_DDR4_2V5"; + regulator-always-on; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + + LDO5 { + regulator-name = "VCC_LDO5_1V8"; + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + LDORTC1 { + regulator-name = "VCC_SNVS_1V8"; + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + LDORTC2 { + regulator-name = "VCC_SNVS_3V3"; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; + + sys_rtc: rtc@32 { + compatible = "ricoh,r2221tl"; + reg = <0x32>; + interrupt-parent = <&tca6424>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + }; + + tmp_sensor: temperature-sensor@71 { + compatible = "ti,tmp103"; + reg = <0x71>; + }; +}; + +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_flexcan1_xceiver>; + status = "disabled"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_flexcan2_xceiver>; + status = "disabled"; +}; + +&flexspi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexspi0>; + status = "okay"; + + qspi_flash: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <80000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "disabled"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "disabled"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "disabled"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "disabled"; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + uart-has-rtscts; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + uart-has-rtscts; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "disabled"; +}; + +&usb3_phy0 { + vbus-supply = <®_usb0_host_vbus>; + status = "okay"; +}; + +&usb3_phy1 { + vbus-supply = <®_usb1_host_vbus>; + status = "okay"; +}; + +&usb3_0 { + status = "okay"; +}; + +&usb3_1 { + status = "okay"; +}; + +&usb_dwc3_0 { + dr_mode = "otg"; + hnp-disable; + srp-disable; + adp-disable; + extcon = <&extcon_usb0>; + status = "okay"; +}; + +&usb_dwc3_1 { + dr_mode = "host"; + status = "okay"; +}; + +&usdhc2 { + assigned-clocks = <&clk IMX8MP_CLK_USDHC2>; + assigned-clock-rates = <400000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>; + bus-width = <4>; + vmmc-supply = <®_usdhc2_vmmc>; + status = "okay"; +}; + +&usdhc3 { + assigned-clocks = <&clk IMX8MP_CLK_USDHC3>; + assigned-clock-rates = <400000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = + <MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO 0x82>, + <MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI 0x82>, + <MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK 0x82>, + <MX8MP_IOMUXC_ECSPI1_SS0__ECSPI1_SS0 0x40000>, + <MX8MP_IOMUXC_SD1_DATA6__GPIO2_IO08 0x40000>; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = + <MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x82>, + <MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x82>, + <MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x82>, + <MX8MP_IOMUXC_ECSPI2_SS0__ECSPI2_SS0 0x40000>, + <MX8MP_IOMUXC_SD1_DATA7__GPIO2_IO09 0x40000>; + }; + + pinctrl_eqos: eqosgrp { + fsl,pins = + <MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3>, + <MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3>, + <MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91>, + <MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91>, + <MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91>, + <MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91>, + <MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91>, + <MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91>, + <MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f>, + <MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f>, + <MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f>, + <MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f>, + <MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f>, + <MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f>; + }; + + pinctrl_fec: fecgrp { + fsl,pins = + <MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3>, + <MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x3>, + <MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91>, + <MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91>, + <MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91>, + <MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91>, + <MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91>, + <MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91>, + <MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f>, + <MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f>, + <MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x1f>, + <MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x1f>, + <MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f>, + <MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x1f>; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = + <MX8MP_IOMUXC_SAI5_RXD1__CAN1_TX 0x154>, + <MX8MP_IOMUXC_SAI5_RXD2__CAN1_RX 0x154>; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = + <MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX 0x154>, + <MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX 0x154>; + }; + + pinctrl_flexspi0: flexspi0grp { + fsl,pins = + <MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK 0x1c2>, + <MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B 0x82>, + <MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00 0x82>, + <MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01 0x82>, + <MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02 0x82>, + <MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03 0x82>, + <MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x19>; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = + <MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c3>, + <MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c3>; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = + <MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c3>, + <MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c3>; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = + <MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c3>, + <MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c3>; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = + <MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x400001c3>, + <MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x400001c3>; + }; + + pinctrl_i2c5: i2c5grp { + fsl,pins = + <MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL 0x400001c3>, + <MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA 0x400001c3>; + }; + + pinctrl_i2c6: i2c6grp { + fsl,pins = + <MX8MP_IOMUXC_SAI5_RXFS__I2C6_SCL 0x400001c3>, + <MX8MP_IOMUXC_SAI5_RXC__I2C6_SDA 0x400001c3>; + }; + + pinctrl_lcd0_backlight: lcd0-backlightgrp { + fsl,pins = + <MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05 0x41>; + }; + + pinctrl_lcd1_backlight: lcd1-backlightgrp { + fsl,pins = + <MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x41>; + }; + + pinctrl_leds: ledsgrp { + fsl,pins = + <MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08 0x19>; + }; + + pinctrl_lvds_bridge: lvds-bridgegrp { + fsl,pins = + <MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x41>; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = + <MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT 0x116>; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = + <MX8MP_IOMUXC_SAI5_RXD0__PWM2_OUT 0x116>; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = + <MX8MP_IOMUXC_GPIO1_IO10__PWM3_OUT 0x116>; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = + <MX8MP_IOMUXC_SAI3_MCLK__PWM4_OUT 0x116>; + }; + + pinctrl_tca6424: tca6424grp { + fsl,pins = + <MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 0x41>; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = + <MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x49>, + <MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x49>; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = + <MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06 0x1c4>, + <MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07 0x1c4>, + <MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x49>, + <MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x49>; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = + <MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10 0x1c4>, + <MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11 0x1c4>, + <MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX 0x49>, + <MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX 0x49>; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = + <MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX 0x49>, + <MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x49>; + }; + + pinctrl_usb0_extcon: usb0-extcongrp { + fsl,pins = + <MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x19>; + }; + + pinctrl_usb0_vbus: usb0-vbusgrp { + fsl,pins = + <MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x19>; + }; + + pinctrl_usb1_vbus: usb1-vbusgrp { + fsl,pins = + <MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14 0x19>; + }; + + pinctrl_usdhc2_gpio: usdhc2-gpiogrp { + fsl,pins = + <MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4>, + <MX8MP_IOMUXC_SD2_WP__GPIO2_IO20 0x1c4>; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = + <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190>, + <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0>, + <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0>, + <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0>, + <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0>, + <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0>, + <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1>; + }; + + pinctrl_usdhc2_vmmc: usdhc2-vmmcgrp { + fsl,pins = + <MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x41>; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = + <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194>, + <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4>, + <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4>, + <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4>, + <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4>, + <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4>, + <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1>; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = + <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196>, + <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6>, + <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6>, + <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6>, + <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6>, + <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6>, + <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1>; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = + <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190>, + <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0>, + <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0>, + <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0>, + <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0>, + <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0>, + <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0>, + <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0>, + <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0>, + <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0>, + <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190>; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = + <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194>, + <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4>, + <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4>, + <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4>, + <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4>, + <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4>, + <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4>, + <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4>, + <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4>, + <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4>, + <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194>; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = + <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196>, + <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6>, + <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6>, + <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6>, + <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6>, + <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6>, + <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6>, + <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6>, + <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6>, + <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6>, + <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196>; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = + <MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0xc6>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts index d8ca52976170..7bf6f81e87b4 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts @@ -57,13 +57,13 @@ switch-1 { label = "S12"; linux,code = <BTN_0>; - gpios = <&gpio5 26 GPIO_ACTIVE_LOW>; + gpios = <&gpio5 27 GPIO_ACTIVE_LOW>; }; switch-2 { label = "S13"; linux,code = <BTN_1>; - gpios = <&gpio5 27 GPIO_ACTIVE_LOW>; + gpios = <&gpio5 26 GPIO_ACTIVE_LOW>; }; }; @@ -139,6 +139,13 @@ regulator-max-microvolt = <3300000>; }; + reg_vcc_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "VCC_5V0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + reserved-memory { #address-cells = <2>; #size-cells = <2>; @@ -394,6 +401,8 @@ &pcf85063 { /* RTC_EVENT# is connected on MBa8MPxL */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcf85063>; interrupt-parent = <&gpio4>; interrupts = <28 IRQ_TYPE_EDGE_FALLING>; }; @@ -445,6 +454,38 @@ status = "okay"; }; +&usb3_0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0>; + fsl,over-current-active-low; + status = "okay"; +}; + +&usb3_phy0 { + vbus-supply = <®_vcc_5v0>; + status = "okay"; +}; + +&usb_dwc3_0 { + /* dual role is implemented, but not a full featured OTG */ + hnp-disable; + srp-disable; + adp-disable; + dr_mode = "otg"; + usb-role-switch; + role-switch-default-mode = "peripheral"; + status = "okay"; + + connector { + compatible = "gpio-usb-b-connector", "usb-b-connector"; + type = "micro"; + label = "X29"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbcon0>; + id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + }; +}; + &usdhc2 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; @@ -630,6 +671,10 @@ fsl,pins = <MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20 0x10>; /* Power enable */ }; + pinctrl_pcf85063: pcf85063grp { + fsl,pins = <MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x80>; + }; + /* LVDS Backlight */ pinctrl_pwm2: pwm2grp { fsl,pins = <MX8MP_IOMUXC_SAI5_RXD0__PWM2_OUT 0x14>; @@ -666,6 +711,15 @@ <MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x140>; }; + pinctrl_usb0: usb0grp { + fsl,pins = <MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC 0x1c0>, + <MX8MP_IOMUXC_GPIO1_IO12__USB1_OTG_PWR 0x1c0>; + }; + + pinctrl_usbcon0: usb0congrp { + fsl,pins = <MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x1c0>; + }; + pinctrl_usdhc2: usdhc2grp { fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x192>, <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d2>, diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts index 521215520a0f..06b4c93c5876 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts @@ -8,6 +8,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/leds/common.h> +#include <dt-bindings/phy/phy-imx8-pcie.h> #include "imx8mp.dtsi" @@ -100,6 +101,12 @@ }; }; + pcie0_refclk: pcie0-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + pps { compatible = "pps-gpio"; pinctrl-names = "default"; @@ -123,8 +130,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reg_can>; regulator-name = "can2_stby"; - gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>; - enable-active-high; + gpio = <&gpio3 19 GPIO_ACTIVE_LOW>; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; @@ -135,13 +141,29 @@ compatible = "regulator-fixed"; regulator-name = "wl"; gpio = <&gpio3 9 GPIO_ACTIVE_HIGH>; - startup-delay-us = <100>; + startup-delay-us = <70000>; enable-active-high; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; }; }; +&A53_0 { + cpu-supply = <®_arm>; +}; + +&A53_1 { + cpu-supply = <®_arm>; +}; + +&A53_2 { + cpu-supply = <®_arm>; +}; + +&A53_3 { + cpu-supply = <®_arm>; +}; + /* off-board header */ &ecspi2 { pinctrl-names = "default"; @@ -200,8 +222,8 @@ &gpio2 { gpio-line-names = "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - "pcie3_wdis#", "", "", "pcie1_wdis@", "pcie2_wdis#", "", "", "", + "", "", "", "", "", "", "pcie3_wdis#", "", + "", "", "pcie2_wdis#", "", "", "", "", "", "", "", "", "", "", "", "", ""; }; @@ -362,7 +384,7 @@ regulator-ramp-delay = <3125>; }; - BUCK2 { + reg_arm: BUCK2 { regulator-name = "BUCK2"; regulator-min-microvolt = <720000>; regulator-max-microvolt = <1025000>; @@ -484,35 +506,40 @@ lan1: port@0 { reg = <0>; label = "lan1"; + phy-mode = "internal"; local-mac-address = [00 00 00 00 00 00]; }; lan2: port@1 { reg = <1>; label = "lan2"; + phy-mode = "internal"; local-mac-address = [00 00 00 00 00 00]; }; lan3: port@2 { reg = <2>; label = "lan3"; + phy-mode = "internal"; local-mac-address = [00 00 00 00 00 00]; }; lan4: port@3 { reg = <3>; label = "lan4"; + phy-mode = "internal"; local-mac-address = [00 00 00 00 00 00]; }; lan5: port@4 { reg = <4>; label = "lan5"; + phy-mode = "internal"; local-mac-address = [00 00 00 00 00 00]; }; - port@6 { - reg = <6>; + port@5 { + reg = <5>; label = "cpu"; ethernet = <&fec>; phy-mode = "rgmii-id"; @@ -542,6 +569,28 @@ status = "okay"; }; +&pcie_phy { + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>; + fsl,clkreq-unsupported; + clocks = <&pcie0_refclk>; + clock-names = "ref"; + status = "okay"; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0>; + reset-gpio = <&gpio2 17 GPIO_ACTIVE_LOW>; + clocks = <&clk IMX8MP_CLK_HSIO_ROOT>, + <&clk IMX8MP_CLK_PCIE_ROOT>, + <&clk IMX8MP_CLK_HSIO_AXI>; + clock-names = "pcie", "pcie_aux", "pcie_bus"; + assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>; + assigned-clock-rates = <10000000>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>; + status = "okay"; +}; + /* GPS / off-board header */ &uart1 { pinctrl-names = "default"; @@ -556,6 +605,21 @@ status = "okay"; }; +/* bluetooth HCI */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>; + cts-gpios = <&gpio3 21 GPIO_ACTIVE_LOW>; + rts-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm4330-bt"; + shutdown-gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>; + }; +}; + &uart4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart4>; @@ -563,20 +627,35 @@ }; /* USB1 - Type C front panel */ -&usb3_phy0 { +&usb3_0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb1>; + fsl,over-current-active-low; status = "okay"; }; -&usb3_0 { - fsl,over-current-active-low; +&usb3_phy0 { status = "okay"; }; &usb_dwc3_0 { - dr_mode = "host"; + /* dual role is implemented but not a full featured OTG */ + adp-disable; + hnp-disable; + srp-disable; + dr_mode = "otg"; + usb-role-switch; + role-switch-default-mode = "peripheral"; status = "okay"; + + connector { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbcon1>; + compatible = "gpio-usb-b-connector", "usb-b-connector"; + type = "micro"; + label = "Type-C"; + id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + }; }; /* USB2 - USB3.0 Hub */ @@ -596,6 +675,25 @@ status = "okay"; }; +/* SDIO WiFi */ +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + bus-width = <4>; + non-removable; + vmmc-supply = <®_wifi_en>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + wifi@0 { + compatible = "cypress,cyw4373-fmac"; + reg = <0>; + }; +}; + /* eMMC */ &usdhc3 { assigned-clocks = <&clk IMX8MP_CLK_USDHC3>; @@ -625,7 +723,6 @@ MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 0x40000040 /* DIO0 */ MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x40000040 /* DIO1 */ MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x40000040 /* M2SKT_OFF# */ - MX8MP_IOMUXC_SD2_DATA2__GPIO2_IO17 0x40000150 /* PCIE1_WDIS# */ MX8MP_IOMUXC_SD2_DATA3__GPIO2_IO18 0x40000150 /* PCIE2_WDIS# */ MX8MP_IOMUXC_SD2_CMD__GPIO2_IO14 0x40000150 /* PCIE3_WDIS# */ MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06 0x40000040 /* M2SKT_RST# */ @@ -738,6 +835,12 @@ >; }; + pinctrl_pcie0: pciegrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_DATA2__GPIO2_IO17 0x110 + >; + }; + pinctrl_pmic: pmicgrp { fsl,pins = < MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07 0x140 @@ -770,10 +873,10 @@ pinctrl_sai2: sai2grp { fsl,pins = < - MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC - MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00 - MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK - MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI2_MCLK + MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC 0xd6 + MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00 0xd6 + MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK 0xd6 + MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI2_MCLK 0xd6 >; }; @@ -825,7 +928,12 @@ pinctrl_usb1: usb1grp { fsl,pins = < MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC 0x140 - MX8MP_IOMUXC_GPIO1_IO10__USB1_OTG_ID 0x140 + >; + }; + + pinctrl_usbcon1: usb1congrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x140 >; }; @@ -840,6 +948,28 @@ >; }; + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x194 + MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d4 + MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d4 + MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d4 + MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d4 + MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d4 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x196 + MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d6 + MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d6 + MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d6 + MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d6 + MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d6 + >; + }; + pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190 diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi index c5987bdbb383..7b712d1888ea 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi @@ -146,6 +146,22 @@ }; }; +&A53_0 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_1 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_2 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_3 { + cpu-supply = <®_vdd_arm>; +}; + &cpu_alert0 { temperature = <95000>; }; @@ -286,7 +302,6 @@ status = "disabled"; }; - /* Verdin CAN_2 */ &flexcan2 { pinctrl-names = "default"; @@ -454,7 +469,7 @@ regulator-ramp-delay = <3125>; }; - BUCK2 { + reg_vdd_arm: BUCK2 { nxp,dvs-run-voltage = <950000>; nxp,dvs-standby-voltage = <850000>; regulator-always-on; @@ -628,7 +643,7 @@ interrupts = <5 IRQ_TYPE_EDGE_FALLING>; reg = <0x4a>; /* Verdin GPIO_2 (SODIMM 208) */ - reset-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; status = "disabled"; }; }; @@ -705,7 +720,7 @@ pinctrl-0 = <&pinctrl_gpio_9_dsi>, <&pinctrl_i2s_2_bclk_touch_reset>; reg = <0x4a>; /* Verdin I2S_2_BCLK (TOUCH_RESET#, SODIMM 42) */ - reset-gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index fe178b7d063c..bb916a0948a8 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -5,8 +5,10 @@ #include <dt-bindings/clock/imx8mp-clock.h> #include <dt-bindings/power/imx8mp-power.h> +#include <dt-bindings/reset/imx8mp-reset.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/interconnect/fsl,imx8mp.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/thermal/thermal.h> @@ -469,6 +471,11 @@ wakeup-source; status = "disabled"; }; + + snvs_lpgpr: snvs-lpgpr { + compatible = "fsl,imx8mp-snvs-lpgpr", + "fsl,imx7d-snvs-lpgpr"; + }; }; clk: clock-controller@30380000 { @@ -597,6 +604,33 @@ reg = <IMX8MP_POWER_DOMAIN_MEDIAMIX_ISPDWP>; clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>; }; + + pgc_vpumix: power-domain@19 { + #power-domain-cells = <0>; + reg = <IMX8MP_POWER_DOMAIN_VPUMIX>; + clocks =<&clk IMX8MP_CLK_VPU_ROOT>; + }; + + pgc_vpu_g1: power-domain@20 { + #power-domain-cells = <0>; + power-domains = <&pgc_vpumix>; + reg = <IMX8MP_POWER_DOMAIN_VPU_G1>; + clocks = <&clk IMX8MP_CLK_VPU_G1_ROOT>; + }; + + pgc_vpu_g2: power-domain@21 { + #power-domain-cells = <0>; + power-domains = <&pgc_vpumix>; + reg = <IMX8MP_POWER_DOMAIN_VPU_G2>; + clocks = <&clk IMX8MP_CLK_VPU_G2_ROOT>; + }; + + pgc_vpu_vc8000e: power-domain@22 { + #power-domain-cells = <0>; + power-domains = <&pgc_vpumix>; + reg = <IMX8MP_POWER_DOMAIN_VPU_VC8000E>; + clocks = <&clk IMX8MP_CLK_VPU_VC8KE_ROOT>; + }; }; }; }; @@ -1064,6 +1098,18 @@ "lcdif1", "isi", "mipi-csi2", "lcdif2", "isp", "dwe", "mipi-dsi2"; + interconnects = + <&noc IMX8MP_ICM_LCDIF_RD &noc IMX8MP_ICN_MEDIA>, + <&noc IMX8MP_ICM_LCDIF_WR &noc IMX8MP_ICN_MEDIA>, + <&noc IMX8MP_ICM_ISI0 &noc IMX8MP_ICN_MEDIA>, + <&noc IMX8MP_ICM_ISI1 &noc IMX8MP_ICN_MEDIA>, + <&noc IMX8MP_ICM_ISI2 &noc IMX8MP_ICN_MEDIA>, + <&noc IMX8MP_ICM_ISP0 &noc IMX8MP_ICN_MEDIA>, + <&noc IMX8MP_ICM_ISP1 &noc IMX8MP_ICN_MEDIA>, + <&noc IMX8MP_ICM_DWE &noc IMX8MP_ICN_MEDIA>; + interconnect-names = "lcdif-rd", "lcdif-wr", "isi0", + "isi1", "isi2", "isp0", "isp1", + "dwe"; clocks = <&clk IMX8MP_CLK_MEDIA_APB_ROOT>, <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>, <&clk IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT>, @@ -1084,6 +1130,17 @@ #power-domain-cells = <1>; }; + pcie_phy: pcie-phy@32f00000 { + compatible = "fsl,imx8mp-pcie-phy"; + reg = <0x32f00000 0x10000>; + resets = <&src IMX8MP_RESET_PCIEPHY>, + <&src IMX8MP_RESET_PCIEPHY_PERST>; + reset-names = "pciephy", "perst"; + power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_PCIE_PHY>; + #phy-cells = <0>; + status = "disabled"; + }; + hsio_blk_ctrl: blk-ctrl@32f10000 { compatible = "fsl,imx8mp-hsio-blk-ctrl", "syscon"; reg = <0x32f10000 0x24>; @@ -1095,10 +1152,46 @@ <&pgc_hsiomix>, <&pgc_pcie_phy>; power-domain-names = "bus", "usb", "usb-phy1", "usb-phy2", "pcie", "pcie-phy"; + interconnects = <&noc IMX8MP_ICM_NOC_PCIE &noc IMX8MP_ICN_HSIO>, + <&noc IMX8MP_ICM_USB1 &noc IMX8MP_ICN_HSIO>, + <&noc IMX8MP_ICM_USB2 &noc IMX8MP_ICN_HSIO>, + <&noc IMX8MP_ICM_PCIE &noc IMX8MP_ICN_HSIO>; + interconnect-names = "noc-pcie", "usb1", "usb2", "pcie"; #power-domain-cells = <1>; }; }; + pcie: pcie@33800000 { + compatible = "fsl,imx8mp-pcie"; + reg = <0x33800000 0x400000>, <0x1ff00000 0x80000>; + reg-names = "dbi", "config"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + bus-range = <0x00 0xff>; + ranges = <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000>, /* downstream I/O 64KB */ + <0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */ + num-lanes = <1>; + num-viewport = <4>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &gic GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &gic GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; + fsl,max-link-speed = <3>; + linux,pci-domain = <0>; + power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_PCIE>; + resets = <&src IMX8MP_RESET_PCIE_CTRL_APPS_EN>, + <&src IMX8MP_RESET_PCIE_CTRL_APPS_TURNOFF>; + reset-names = "apps", "turnoff"; + phys = <&pcie_phy>; + phy-names = "pcie-phy"; + status = "disabled"; + }; + gpu3d: gpu@38000000 { compatible = "vivante,gc"; reg = <0x38000000 0x8000>; @@ -1130,6 +1223,23 @@ power-domains = <&pgc_gpu2d>; }; + vpumix_blk_ctrl: blk-ctrl@38330000 { + compatible = "fsl,imx8mp-vpu-blk-ctrl", "syscon"; + reg = <0x38330000 0x100>; + #power-domain-cells = <1>; + power-domains = <&pgc_vpumix>, <&pgc_vpu_g1>, + <&pgc_vpu_g2>, <&pgc_vpu_vc8000e>; + power-domain-names = "bus", "g1", "g2", "vc8000e"; + clocks = <&clk IMX8MP_CLK_VPU_G1_ROOT>, + <&clk IMX8MP_CLK_VPU_G2_ROOT>, + <&clk IMX8MP_CLK_VPU_VC8KE_ROOT>; + clock-names = "g1", "g2", "vc8000e"; + interconnects = <&noc IMX8MP_ICM_VPU_G1 &noc IMX8MP_ICN_VIDEO>, + <&noc IMX8MP_ICM_VPU_G2 &noc IMX8MP_ICN_VIDEO>, + <&noc IMX8MP_ICM_VPU_H1 &noc IMX8MP_ICN_VIDEO>; + interconnect-names = "g1", "g2", "vc8000e"; + }; + gic: interrupt-controller@38800000 { compatible = "arm,gic-v3"; reg = <0x38800000 0x10000>, @@ -1189,7 +1299,7 @@ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; phys = <&usb3_phy0>, <&usb3_phy0>; phy-names = "usb2-phy", "usb3-phy"; - snps,dis-u2-freeclk-exists-quirk; + snps,gfladj-refclk-lpm-sel-quirk; }; }; @@ -1231,7 +1341,7 @@ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; phys = <&usb3_phy1>, <&usb3_phy1>; phy-names = "usb2-phy", "usb3-phy"; - snps,dis-u2-freeclk-exists-quirk; + snps,gfladj-refclk-lpm-sel-quirk; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi index 9eec8a7eecfc..ae08556b2ef2 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi @@ -7,6 +7,7 @@ #include "dt-bindings/input/input.h" #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/leds/common.h> #include "dt-bindings/pwm/pwm.h" #include "dt-bindings/usb/pd.h" #include "imx8mq.dtsi" @@ -54,6 +55,31 @@ }; }; + led-controller { + compatible = "pwm-leds"; + + led-0 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_BLUE>; + max-brightness = <248>; + pwms = <&pwm2 0 50000 0>; + }; + + led-1 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + max-brightness = <248>; + pwms = <&pwm4 0 50000 0>; + }; + + led-2 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + max-brightness = <248>; + pwms = <&pwm3 0 50000 0>; + }; + }; + reg_aud_1v8: regulator-audio-1v8 { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -747,6 +773,10 @@ interrupt-names = "irq"; connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + ports { #address-cells = <1>; #size-cells = <0>; @@ -1070,6 +1100,12 @@ pinctrl-0 = <&pinctrl_i2c4>; status = "okay"; + vcm@c { + compatible = "dongwoon,dw9714"; + reg = <0x0c>; + vcc-supply = <®_csi_1v8>; + }; + bat: fuel-gauge@36 { compatible = "maxim,max17055"; reg = <0x36>; @@ -1077,6 +1113,7 @@ interrupts = <20 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gauge>; + power-supplies = <&bq25895>; maxim,over-heat-temp = <700>; maxim,over-volt = <4500>; maxim,rsns-microohm = <5000>; @@ -1106,8 +1143,6 @@ }; &mipi_csi1 { - #address-cells = <1>; - #size-cells = <0>; status = "okay"; ports { @@ -1265,6 +1300,7 @@ #size-cells = <0>; dr_mode = "otg"; snps,dis_u3_susphy_quirk; + usb-role-switch; status = "okay"; port@0 { diff --git a/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts b/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts index 8956a46788fa..055031bba8c4 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts @@ -210,7 +210,6 @@ status = "okay"; }; - ®_1p8v { vin-supply = <®_main_5v>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi index 899e8e7dbc24..802ad6e5cef6 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi @@ -204,7 +204,6 @@ reg = <0x51>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rtc>; - interrupt-names = "irq"; interrupt-parent = <&gpio1>; interrupts = <1 IRQ_TYPE_EDGE_FALLING>; quartz-load-femtofarads = <7000>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index e9f0cdd10ab6..19eaa523564d 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -534,7 +534,7 @@ status = "disabled"; }; - sdma2: sdma@302c0000 { + sdma2: dma-controller@302c0000 { compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma"; reg = <0x302c0000 0x10000>; interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; @@ -1302,7 +1302,7 @@ status = "disabled"; }; - sdma1: sdma@30bd0000 { + sdma1: dma-controller@30bd0000 { compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma"; reg = <0x30bd0000 0x10000>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts index 33e84c4e9ed8..f1c6d933a17c 100644 --- a/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts @@ -19,6 +19,21 @@ device_type = "memory"; reg = <0x0 0x80000000 0 0x80000000>; }; + + clock_ext_rmii: clock-ext-rmii { + compatible = "fixed-clock"; + clock-frequency = <50000000>; + clock-output-names = "ext_rmii_clk"; + #clock-cells = <0>; + }; + + clock_ext_ts: clock-ext-ts { + compatible = "fixed-clock"; + /* External ts clock is 50MHZ from PHY on EVK board. */ + clock-frequency = <50000000>; + clock-output-names = "ext_ts_clk"; + #clock-cells = <0>; + }; }; &lpuart5 { @@ -38,7 +53,49 @@ status = "okay"; }; +&fec { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_enet>; + pinctrl-1 = <&pinctrl_enet>; + clocks = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>, + <&pcc4 IMX8ULP_CLK_ENET>, + <&cgc1 IMX8ULP_CLK_ENET_TS_SEL>, + <&clock_ext_rmii>; + clock-names = "ipg", "ahb", "ptp", "enet_clk_ref"; + assigned-clocks = <&cgc1 IMX8ULP_CLK_ENET_TS_SEL>; + assigned-clock-parents = <&clock_ext_ts>; + phy-mode = "rmii"; + phy-handle = <ðphy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@1 { + reg = <1>; + micrel,led-mode = <1>; + }; + }; +}; + &iomuxc1 { + pinctrl_enet: enetgrp { + fsl,pins = < + MX8ULP_PAD_PTE15__ENET0_MDC 0x43 + MX8ULP_PAD_PTE14__ENET0_MDIO 0x43 + MX8ULP_PAD_PTE17__ENET0_RXER 0x43 + MX8ULP_PAD_PTE18__ENET0_CRS_DV 0x43 + MX8ULP_PAD_PTF1__ENET0_RXD0 0x43 + MX8ULP_PAD_PTE20__ENET0_RXD1 0x43 + MX8ULP_PAD_PTE16__ENET0_TXEN 0x43 + MX8ULP_PAD_PTE23__ENET0_TXD0 0x43 + MX8ULP_PAD_PTE22__ENET0_TXD1 0x43 + MX8ULP_PAD_PTE19__ENET0_REFCLK 0x43 + MX8ULP_PAD_PTF10__ENET0_1588_CLKIN 0x43 + >; + }; + pinctrl_lpuart5: lpuart5grp { fsl,pins = < MX8ULP_PAD_PTF14__LPUART5_TX 0x3 diff --git a/arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h b/arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h index b204ac79b449..b204ac79b449 100755..100644 --- a/arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h +++ b/arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi index 60c1b018bf03..06ce5f19aa8a 100644 --- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi @@ -16,6 +16,7 @@ #size-cells = <2>; aliases { + ethernet0 = &fec; gpio0 = &gpiod; gpio1 = &gpioe; gpio2 = &gpiof; @@ -62,6 +63,14 @@ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; }; + pmu { + compatible = "arm,cortex-a35-pmu"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 7 + (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + interrupt-affinity = <&A35_0>, <&A35_1>; + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -111,7 +120,7 @@ #size-cells = <1>; ranges = <0 0x0 0x2201f000 0x1000>; - scmi_buf: scmi-buf@0 { + scmi_buf: scmi-sram-section@0 { compatible = "arm,scmi-shmem"; reg = <0x0 0x400>; }; @@ -143,6 +152,13 @@ #size-cells = <1>; ranges = <0x0 0x0 0x0 0x40000000>; + s4muap: mailbox@27020000 { + compatible = "fsl,imx8ulp-mu-s4"; + reg = <0x27020000 0x10000>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + }; + per_bridge3: bus@29000000 { compatible = "simple-bus"; reg = <0x29000000 0x800000>; @@ -150,6 +166,23 @@ #size-cells = <1>; ranges; + mu: mailbox@29220000 { + compatible = "fsl,imx8ulp-mu"; + reg = <0x29220000 0x10000>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + status = "disabled"; + }; + + mu3: mailbox@29230000 { + compatible = "fsl,imx8ulp-mu"; + reg = <0x29230000 0x10000>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc3 IMX8ULP_CLK_MU3_A>; + #mbox-cells = <2>; + status = "disabled"; + }; + wdog3: watchdog@292a0000 { compatible = "fsl,imx8ulp-wdt", "fsl,imx7ulp-wdt"; reg = <0x292a0000 0x10000>; @@ -163,8 +196,6 @@ cgc1: clock-controller@292c0000 { compatible = "fsl,imx8ulp-cgc1"; reg = <0x292c0000 0x10000>; - clocks = <&rosc>, <&sosc>, <&frosc>, <&lposc>; - clock-names = "rosc", "sosc", "frosc", "lposc"; #clock-cells = <1>; }; @@ -172,6 +203,7 @@ compatible = "fsl,imx8ulp-pcc3"; reg = <0x292d0000 0x10000>; #clock-cells = <1>; + #reset-cells = <1>; }; tpm5: tpm@29340000 { @@ -192,7 +224,7 @@ <&pcc3 IMX8ULP_CLK_LPI2C4>; clock-names = "per", "ipg"; assigned-clocks = <&pcc3 IMX8ULP_CLK_LPI2C4>; - assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>; + assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>; assigned-clock-rates = <48000000>; status = "disabled"; }; @@ -205,7 +237,7 @@ <&pcc3 IMX8ULP_CLK_LPI2C5>; clock-names = "per", "ipg"; assigned-clocks = <&pcc3 IMX8ULP_CLK_LPI2C5>; - assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>; + assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>; assigned-clock-rates = <48000000>; status = "disabled"; }; @@ -238,8 +270,8 @@ <&pcc3 IMX8ULP_CLK_LPSPI4>; clock-names = "per", "ipg"; assigned-clocks = <&pcc3 IMX8ULP_CLK_LPSPI4>; - assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>; - assigned-clock-rates = <16000000>; + assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>; + assigned-clock-rates = <48000000>; status = "disabled"; }; @@ -253,8 +285,8 @@ <&pcc3 IMX8ULP_CLK_LPSPI5>; clock-names = "per", "ipg"; assigned-clocks = <&pcc3 IMX8ULP_CLK_LPSPI5>; - assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>; - assigned-clock-rates = <16000000>; + assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>; + assigned-clock-rates = <48000000>; status = "disabled"; }; }; @@ -270,6 +302,7 @@ compatible = "fsl,imx8ulp-pcc4"; reg = <0x29800000 0x10000>; #clock-cells = <1>; + #reset-cells = <1>; }; lpi2c6: i2c@29840000 { @@ -280,7 +313,7 @@ <&pcc4 IMX8ULP_CLK_LPI2C6>; clock-names = "per", "ipg"; assigned-clocks = <&pcc4 IMX8ULP_CLK_LPI2C6>; - assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>; + assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>; assigned-clock-rates = <48000000>; status = "disabled"; }; @@ -293,7 +326,7 @@ <&pcc4 IMX8ULP_CLK_LPI2C7>; clock-names = "per", "ipg"; assigned-clocks = <&pcc4 IMX8ULP_CLK_LPI2C7>; - assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>; + assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>; assigned-clock-rates = <48000000>; status = "disabled"; }; @@ -365,6 +398,16 @@ bus-width = <4>; status = "disabled"; }; + + fec: ethernet@29950000 { + compatible = "fsl,imx8ulp-fec", "fsl,imx6ul-fec", "fsl,imx6q-fec"; + reg = <0x29950000 0x10000>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0"; + fsl,num-tx-queues = <1>; + fsl,num-rx-queues = <1>; + status = "disabled"; + }; }; gpioe: gpio@2d000080 { @@ -405,8 +448,6 @@ cgc2: clock-controller@2da60000 { compatible = "fsl,imx8ulp-cgc2"; reg = <0x2da60000 0x10000>; - clocks = <&sosc>, <&frosc>; - clock-names = "sosc", "frosc"; #clock-cells = <1>; }; @@ -414,6 +455,7 @@ compatible = "fsl,imx8ulp-pcc5"; reg = <0x2da70000 0x10000>; #clock-cells = <1>; + #reset-cells = <1>; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi index f83a07c7c9b1..3a5713bb4880 100644 --- a/arch/arm64/boot/dts/freescale/imx93.dtsi +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi @@ -7,6 +7,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/fsl,imx93-power.h> #include "imx93-pinfunc.h" @@ -16,6 +17,14 @@ #size-cells = <2>; aliases { + i2c0 = &lpi2c1; + i2c1 = &lpi2c2; + i2c2 = &lpi2c3; + i2c3 = &lpi2c4; + i2c4 = &lpi2c5; + i2c5 = &lpi2c6; + i2c6 = &lpi2c7; + i2c7 = &lpi2c8; mmc0 = &usdhc1; mmc1 = &usdhc2; mmc2 = &usdhc3; @@ -72,6 +81,11 @@ clock-output-names = "clk_ext1"; }; + pmu { + compatible = "arm,cortex-a55-pmu"; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -112,6 +126,11 @@ #size-cells = <1>; ranges; + anomix_ns_gpr: syscon@44210000 { + compatible = "fsl,imx93-aonmix-ns-syscfg", "syscon"; + reg = <0x44210000 0x1000>; + }; + mu1: mailbox@44230000 { compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu"; reg = <0x44230000 0x10000>; @@ -128,6 +147,50 @@ clock-names = "per"; }; + lpi2c1: i2c@44340000 { + compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x44340000 0x10000>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_LPI2C1_GATE>, + <&clk IMX93_CLK_BUS_AON>; + clock-names = "per", "ipg"; + status = "disabled"; + }; + + lpi2c2: i2c@44350000 { + compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x44350000 0x10000>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_LPI2C2_GATE>, + <&clk IMX93_CLK_BUS_AON>; + clock-names = "per", "ipg"; + status = "disabled"; + }; + + lpspi1: spi@44360000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi"; + reg = <0x44360000 0x10000>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_LPSPI1_GATE>, + <&clk IMX93_CLK_BUS_AON>; + clock-names = "per", "ipg"; + status = "disabled"; + }; + + lpspi2: spi@44370000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi"; + reg = <0x44370000 0x10000>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_LPSPI2_GATE>, + <&clk IMX93_CLK_BUS_AON>; + clock-names = "per", "ipg"; + status = "disabled"; + }; + lpuart1: serial@44380000 { compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; reg = <0x44380000 0x1000>; @@ -161,6 +224,30 @@ status = "okay"; }; + src: system-controller@44460000 { + compatible = "fsl,imx93-src", "syscon"; + reg = <0x44460000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mediamix: power-domain@44462400 { + compatible = "fsl,imx93-src-slice"; + reg = <0x44462400 0x400>, <0x44465800 0x400>; + #power-domain-cells = <0>; + clocks = <&clk IMX93_CLK_MEDIA_AXI>, + <&clk IMX93_CLK_MEDIA_APB>; + }; + + mlmix: power-domain@44461800 { + compatible = "fsl,imx93-src-slice"; + reg = <0x44461800 0x400>, <0x44464800 0x400>; + #power-domain-cells = <0>; + clocks = <&clk IMX93_CLK_ML_APB>, + <&clk IMX93_CLK_ML>; + }; + }; + anatop: anatop@44480000 { compatible = "fsl,imx93-anatop", "syscon"; reg = <0x44480000 0x10000>; @@ -174,6 +261,11 @@ #size-cells = <1>; ranges; + wakeupmix_gpr: syscon@42420000 { + compatible = "fsl,imx93-wakeupmix-syscfg", "syscon"; + reg = <0x42420000 0x1000>; + }; + mu2: mailbox@42440000 { compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu"; reg = <0x42440000 0x10000>; @@ -182,6 +274,26 @@ status = "disabled"; }; + lpi2c3: i2c@42530000 { + compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x42530000 0x10000>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_LPI2C3_GATE>, + <&clk IMX93_CLK_BUS_WAKEUP>; + clock-names = "per", "ipg"; + status = "disabled"; + }; + + lpi2c4: i2c@42540000 { + compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x42540000 0x10000>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_LPI2C4_GATE>, + <&clk IMX93_CLK_BUS_WAKEUP>; + clock-names = "per", "ipg"; + status = "disabled"; + }; + lpuart3: serial@42570000 { compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; reg = <0x42570000 0x1000>; @@ -235,6 +347,47 @@ clock-names = "ipg"; status = "disabled"; }; + + lpi2c5: i2c@426b0000 { + compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x426b0000 0x10000>; + interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_LPI2C5_GATE>, + <&clk IMX93_CLK_BUS_WAKEUP>; + clock-names = "per", "ipg"; + status = "disabled"; + }; + + lpi2c6: i2c@426c0000 { + compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x426c0000 0x10000>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_LPI2C6_GATE>, + <&clk IMX93_CLK_BUS_WAKEUP>; + clock-names = "per", "ipg"; + status = "disabled"; + }; + + lpi2c7: i2c@426d0000 { + compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x426d0000 0x10000>; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_LPI2C7_GATE>, + <&clk IMX93_CLK_BUS_WAKEUP>; + clock-names = "per", "ipg"; + status = "disabled"; + }; + + lpi2c8: i2c@426e0000 { + compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x426e0000 0x10000>; + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_LPI2C8_GATE>, + <&clk IMX93_CLK_BUS_WAKEUP>; + clock-names = "per", "ipg"; + status = "disabled"; + }; + }; aips3: bus@42800000 { @@ -248,8 +401,8 @@ compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc"; reg = <0x42850000 0x10000>; interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX93_CLK_DUMMY>, - <&clk IMX93_CLK_DUMMY>, + clocks = <&clk IMX93_CLK_BUS_WAKEUP>, + <&clk IMX93_CLK_WAKEUP_AXI>, <&clk IMX93_CLK_USDHC1_GATE>; clock-names = "ipg", "ahb", "per"; bus-width = <8>; @@ -262,8 +415,8 @@ compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc"; reg = <0x42860000 0x10000>; interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX93_CLK_DUMMY>, - <&clk IMX93_CLK_DUMMY>, + clocks = <&clk IMX93_CLK_BUS_WAKEUP>, + <&clk IMX93_CLK_WAKEUP_AXI>, <&clk IMX93_CLK_USDHC2_GATE>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; @@ -276,8 +429,8 @@ compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc"; reg = <0x428b0000 0x10000>; interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX93_CLK_DUMMY>, - <&clk IMX93_CLK_DUMMY>, + clocks = <&clk IMX93_CLK_BUS_WAKEUP>, + <&clk IMX93_CLK_WAKEUP_AXI>, <&clk IMX93_CLK_USDHC3_GATE>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; @@ -295,6 +448,9 @@ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; + clocks = <&clk IMX93_CLK_GPIO2_GATE>, + <&clk IMX93_CLK_GPIO2_GATE>; + clock-names = "gpio", "port"; gpio-ranges = <&iomuxc 0 32 32>; }; @@ -306,6 +462,9 @@ interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; + clocks = <&clk IMX93_CLK_GPIO3_GATE>, + <&clk IMX93_CLK_GPIO3_GATE>; + clock-names = "gpio", "port"; gpio-ranges = <&iomuxc 0 64 32>; }; @@ -317,6 +476,9 @@ interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; + clocks = <&clk IMX93_CLK_GPIO4_GATE>, + <&clk IMX93_CLK_GPIO4_GATE>; + clock-names = "gpio", "port"; gpio-ranges = <&iomuxc 0 96 32>; }; @@ -328,7 +490,39 @@ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; + clocks = <&clk IMX93_CLK_GPIO1_GATE>, + <&clk IMX93_CLK_GPIO1_GATE>; + clock-names = "gpio", "port"; gpio-ranges = <&iomuxc 0 0 32>; }; + + s4muap: mailbox@47520000 { + compatible = "fsl,imx93-mu-s4"; + reg = <0x47520000 0x10000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "txirq", "rxirq"; + #mbox-cells = <2>; + }; + + media_blk_ctrl: system-controller@4ac10000 { + compatible = "fsl,imx93-media-blk-ctrl", "syscon"; + reg = <0x4ac10000 0x10000>; + power-domains = <&mediamix>; + clocks = <&clk IMX93_CLK_MEDIA_APB>, + <&clk IMX93_CLK_MEDIA_AXI>, + <&clk IMX93_CLK_NIC_MEDIA_GATE>, + <&clk IMX93_CLK_MEDIA_DISP_PIX>, + <&clk IMX93_CLK_CAM_PIX>, + <&clk IMX93_CLK_PXP_GATE>, + <&clk IMX93_CLK_LCDIF_GATE>, + <&clk IMX93_CLK_ISI_GATE>, + <&clk IMX93_CLK_MIPI_CSI_GATE>, + <&clk IMX93_CLK_MIPI_DSI_GATE>; + clock-names = "apb", "axi", "nic", "disp", "cam", + "pxp", "lcdif", "isi", "csi", "dsi"; + #power-domain-cells = <1>; + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile index b6d493e34dc5..058237681fe5 100644 --- a/arch/arm64/boot/dts/marvell/Makefile +++ b/arch/arm64/boot/dts/marvell/Makefile @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 # Mvebu SoC Family dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb +dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-eDPU.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-emmc.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-ultra.dtb diff --git a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi index 80b44c7df56a..44ed6f963b75 100644 --- a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi +++ b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi @@ -95,6 +95,36 @@ status = "okay"; }; + uart1: serial@12100 { + compatible = "snps,dw-apb-uart"; + reg = <0x11000 0x100>; + reg-shift = <2>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clocks = <&cnm_clock>; + status = "disabled"; + }; + + uart2: serial@12200 { + compatible = "snps,dw-apb-uart"; + reg = <0x12200 0x100>; + reg-shift = <2>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clocks = <&cnm_clock>; + status = "disabled"; + }; + + uart3: serial@12300 { + compatible = "snps,dw-apb-uart"; + reg = <0x12300 0x100>; + reg-shift = <2>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clocks = <&cnm_clock>; + status = "disabled"; + }; + mdio: mdio@22004 { #address-cells = <1>; #size-cells = <0>; @@ -117,8 +147,8 @@ pinctrl-names = "default", "gpio"; pinctrl-0 = <&i2c0_pins>; pinctrl-1 = <&i2c0_gpio>; - scl_gpio = <&gpio0 26 GPIO_ACTIVE_HIGH>; - sda_gpio = <&gpio0 27 GPIO_ACTIVE_HIGH>; + scl-gpios = <&gpio0 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio0 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; }; @@ -136,8 +166,8 @@ pinctrl-names = "default", "gpio"; pinctrl-0 = <&i2c1_pins>; pinctrl-1 = <&i2c1_gpio>; - scl_gpio = <&gpio0 20 GPIO_ACTIVE_HIGH>; - sda_gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>; + scl-gpios = <&gpio0 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio0 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts b/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts new file mode 100644 index 000000000000..57fc698e55d0 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include "armada-3720-uDPU.dtsi" + +/ { + model = "Methode eDPU Board"; + compatible = "methode,edpu", "marvell,armada3720", "marvell,armada3710"; +}; + +ð0 { + phy-mode = "2500base-x"; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts index 070725b81be5..1b2ed63ae6a2 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts @@ -12,8 +12,8 @@ / { model = "Globalscale Marvell ESPRESSOBin Ultra Board"; - compatible = "globalscale,espressobin-ultra", "marvell,armada3720", - "marvell,armada3710"; + compatible = "globalscale,espressobin-ultra", "globalscale,espressobin", + "marvell,armada3720", "marvell,armada3710"; aliases { /* ethernet1 is WAN port */ diff --git a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts index b20c8e7d923b..c76eceabd33e 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts @@ -1,66 +1,12 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Device tree for the uDPU board. - * Based on Marvell Armada 3720 development board (DB-88F3720-DDR3) - * Copyright (C) 2016 Marvell - * Copyright (C) 2019 Methode Electronics - * Copyright (C) 2019 Telus - * - * Vladimir Vid <vladimir.vid@sartura.hr> - */ /dts-v1/; -#include <dt-bindings/gpio/gpio.h> -#include "armada-372x.dtsi" +#include "armada-3720-uDPU.dtsi" / { model = "Methode uDPU Board"; - compatible = "methode,udpu", "marvell,armada3720"; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x00000000 0x00000000 0x00000000 0x20000000>; - }; - - leds { - pinctrl-names = "default"; - compatible = "gpio-leds"; - - power1 { - label = "udpu:green:power"; - gpios = <&gpionb 11 GPIO_ACTIVE_LOW>; - }; - - power2 { - label = "udpu:red:power"; - gpios = <&gpionb 12 GPIO_ACTIVE_LOW>; - }; - - network1 { - label = "udpu:green:network"; - gpios = <&gpionb 13 GPIO_ACTIVE_LOW>; - }; - - network2 { - label = "udpu:red:network"; - gpios = <&gpionb 14 GPIO_ACTIVE_LOW>; - }; - - alarm1 { - label = "udpu:green:alarm"; - gpios = <&gpionb 15 GPIO_ACTIVE_LOW>; - }; - - alarm2 { - label = "udpu:red:alarm"; - gpios = <&gpionb 16 GPIO_ACTIVE_LOW>; - }; - }; + compatible = "methode,udpu", "marvell,armada3720", "marvell,armada3710"; sfp_eth0: sfp-eth0 { compatible = "sff,sfp"; @@ -71,55 +17,6 @@ tx-fault-gpios = <&gpiosb 5 GPIO_ACTIVE_HIGH>; maximum-power-milliwatt = <3000>; }; - - sfp_eth1: sfp-eth1 { - compatible = "sff,sfp"; - i2c-bus = <&i2c1>; - los-gpios = <&gpiosb 7 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&gpiosb 8 GPIO_ACTIVE_LOW>; - tx-disable-gpios = <&gpiosb 9 GPIO_ACTIVE_HIGH>; - tx-fault-gpios = <&gpiosb 10 GPIO_ACTIVE_HIGH>; - maximum-power-milliwatt = <3000>; - }; -}; - -&sdhci0 { - status = "okay"; - bus-width = <8>; - mmc-ddr-1_8v; - mmc-hs400-1_8v; - marvell,pad-type = "fixed-1-8v"; - non-removable; - no-sd; - no-sdio; -}; - -&spi0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&spi_quad_pins>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <54000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "firmware"; - reg = <0x0 0x180000>; - }; - - partition@180000 { - label = "u-boot-env"; - reg = <0x180000 0x10000>; - }; - }; - }; }; &pinctrl_nb { @@ -127,11 +24,6 @@ groups = "i2c1"; function = "gpio"; }; - - i2c2_recovery_pins: i2c2-recovery-pins { - groups = "i2c2"; - function = "gpio"; - }; }; &i2c0 { @@ -144,50 +36,7 @@ sda-gpios = <&gpionb 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; }; -&i2c1 { - status = "okay"; - pinctrl-names = "default", "recovery"; - pinctrl-0 = <&i2c2_pins>; - pinctrl-1 = <&i2c2_recovery_pins>; - /delete-property/mrvl,i2c-fast-mode; - scl-gpios = <&gpionb 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - sda-gpios = <&gpionb 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - - nct375@48 { - status = "okay"; - compatible = "ti,tmp75c"; - reg = <0x48>; - }; - - nct375@49 { - status = "okay"; - compatible = "ti,tmp75c"; - reg = <0x49>; - }; -}; - ð0 { phy-mode = "sgmii"; - status = "okay"; - managed = "in-band-status"; - phys = <&comphy1 0>; sfp = <&sfp_eth0>; }; - -ð1 { - phy-mode = "sgmii"; - status = "okay"; - managed = "in-band-status"; - phys = <&comphy0 1>; - sfp = <&sfp_eth1>; -}; - -&usb3 { - status = "okay"; - phys = <&usb2_utmi_otg_phy>; - phy-names = "usb2-utmi-otg-phy"; -}; - -&uart0 { - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi new file mode 100644 index 000000000000..3f79923376fb --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi @@ -0,0 +1,160 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device tree for the uDPU board. + * Based on Marvell Armada 3720 development board (DB-88F3720-DDR3) + * Copyright (C) 2016 Marvell + * Copyright (C) 2019 Methode Electronics + * Copyright (C) 2019 Telus + * + * Vladimir Vid <vladimir.vid@sartura.hr> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include "armada-372x.dtsi" + +/ { + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0x20000000>; + }; + + leds { + compatible = "gpio-leds"; + + led-power1 { + label = "udpu:green:power"; + gpios = <&gpionb 11 GPIO_ACTIVE_LOW>; + }; + + led-power2 { + label = "udpu:red:power"; + gpios = <&gpionb 12 GPIO_ACTIVE_LOW>; + }; + + led-network1 { + label = "udpu:green:network"; + gpios = <&gpionb 13 GPIO_ACTIVE_LOW>; + }; + + led-network2 { + label = "udpu:red:network"; + gpios = <&gpionb 14 GPIO_ACTIVE_LOW>; + }; + + led-alarm1 { + label = "udpu:green:alarm"; + gpios = <&gpionb 15 GPIO_ACTIVE_LOW>; + }; + + led-alarm2 { + label = "udpu:red:alarm"; + gpios = <&gpionb 16 GPIO_ACTIVE_LOW>; + }; + }; + + sfp_eth1: sfp-eth1 { + compatible = "sff,sfp"; + i2c-bus = <&i2c1>; + los-gpio = <&gpiosb 7 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpiosb 8 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpiosb 9 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&gpiosb 10 GPIO_ACTIVE_HIGH>; + maximum-power-milliwatt = <3000>; + }; +}; + +&sdhci0 { + status = "okay"; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; + marvell,pad-type = "fixed-1-8v"; + non-removable; + no-sd; + no-sdio; +}; + +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi_quad_pins>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <54000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "firmware"; + reg = <0x0 0x180000>; + }; + + partition@180000 { + label = "u-boot-env"; + reg = <0x180000 0x10000>; + }; + }; + }; +}; + +&pinctrl_nb { + i2c2_recovery_pins: i2c2-recovery-pins { + groups = "i2c2"; + function = "gpio"; + }; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default", "recovery"; + pinctrl-0 = <&i2c2_pins>; + pinctrl-1 = <&i2c2_recovery_pins>; + /delete-property/mrvl,i2c-fast-mode; + scl-gpios = <&gpionb 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpionb 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + + temp-sensor@48 { + compatible = "ti,tmp75c"; + reg = <0x48>; + }; + + temp-sensor@49 { + compatible = "ti,tmp75c"; + reg = <0x49>; + }; +}; + +ð0 { + status = "okay"; + managed = "in-band-status"; + phys = <&comphy1 0>; +}; + +ð1 { + phy-mode = "sgmii"; + status = "okay"; + managed = "in-band-status"; + phys = <&comphy0 1>; + sfp = <&sfp_eth1>; +}; + +&usb3 { + status = "okay"; + phys = <&usb2_utmi_otg_phy>; + phy-names = "usb2-utmi-otg-phy"; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile index af362a085a02..0ec90cb3ef28 100644 --- a/arch/arm64/boot/dts/mediatek/Makefile +++ b/arch/arm64/boot/dts/mediatek/Makefile @@ -37,6 +37,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku32.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r1.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-spherion-r0.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-evb.dtb diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi index 4797537cb368..e6d7453e56e0 100644 --- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi @@ -756,7 +756,7 @@ snps,mtl-tx-config = <&mtl_tx_setup>; snps,txpbl = <1>; snps,rxpbl = <1>; - clk_csr = <0>; + snps,clk-csr = <0>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt6795.dtsi b/arch/arm64/boot/dts/mediatek/mt6795.dtsi index d4842b4a4eb7..46f0e54be766 100644 --- a/arch/arm64/boot/dts/mediatek/mt6795.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt6795.dtsi @@ -230,6 +230,14 @@ reg = <0 0x10200620 0 0x20>; }; + systimer: timer@10200670 { + compatible = "mediatek,mt6795-systimer"; + reg = <0 0x10200670 0 0x10>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&system_clk>; + clock-names = "clk13m"; + }; + gic: interrupt-controller@10221000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts index 882277a52b69..afe37b702eef 100644 --- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts +++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts @@ -115,6 +115,13 @@ status = "okay"; }; +&wifi { + status = "okay"; + pinctrl-names = "default", "dbdc"; + pinctrl-0 = <&wf_2g_5g_pins>; + pinctrl-1 = <&wf_dbdc_pins>; +}; + &pio { uart1_pins: uart1-pins { mux { @@ -129,4 +136,35 @@ groups = "uart2"; }; }; + + wf_2g_5g_pins: wf-2g-5g-pins { + mux { + function = "wifi"; + groups = "wf_2g", "wf_5g"; + }; + conf { + pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4", + "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6", + "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10", + "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1", + "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0", + "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8", + "WF1_TOP_CLK", "WF1_TOP_DATA"; + drive-strength = <4>; + }; + }; + + wf_dbdc_pins: wf-dbdc-pins { + mux { + function = "wifi"; + groups = "wf_dbdc"; + }; + conf { + pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4", + "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6", + "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10", + "WF0_TOP_CLK", "WF0_TOP_DATA"; + drive-strength = <4>; + }; + }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi index e3a407d03551..72e0d9722e07 100644 --- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi @@ -7,6 +7,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/mt7986-clk.h> +#include <dt-bindings/reset/mt7986-resets.h> / { interrupt-parent = <&gic>; @@ -70,6 +71,11 @@ reg = <0 0x43000000 0 0x30000>; no-map; }; + + wmcpu_emi: wmcpu-reserved@4fc00000 { + no-map; + reg = <0 0x4fc00000 0 0x00100000>; + }; }; timer { @@ -222,6 +228,28 @@ #reset-cells = <1>; }; + wed_pcie: wed-pcie@10003000 { + compatible = "mediatek,mt7986-wed-pcie", + "syscon"; + reg = <0 0x10003000 0 0x10>; + }; + + wed0: wed@15010000 { + compatible = "mediatek,mt7986-wed", + "syscon"; + reg = <0 0x15010000 0 0x1000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>; + }; + + wed1: wed@15011000 { + compatible = "mediatek,mt7986-wed", + "syscon"; + reg = <0 0x15011000 0 0x1000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>; + }; + eth: ethernet@15100000 { compatible = "mediatek,mt7986-eth"; reg = <0 0x15100000 0 0x80000>; @@ -256,11 +284,30 @@ <&apmixedsys CLK_APMIXED_SGMPLL>; mediatek,ethsys = <ðsys>; mediatek,sgmiisys = <&sgmiisys0>, <&sgmiisys1>; + mediatek,wed-pcie = <&wed_pcie>; + mediatek,wed = <&wed0>, <&wed1>; #reset-cells = <1>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; + + wifi: wifi@18000000 { + compatible = "mediatek,mt7986-wmac"; + resets = <&watchdog MT7986_TOPRGU_CONSYS_SW_RST>; + reset-names = "consys"; + clocks = <&topckgen CLK_TOP_CONN_MCUSYS_SEL>, + <&topckgen CLK_TOP_AP2CNN_HOST_SEL>; + clock-names = "mcu", "ap2conn"; + reg = <0 0x18000000 0 0x1000000>, + <0 0x10003000 0 0x1000>, + <0 0x11d10000 0 0x1000>; + interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>; + memory-region = <&wmcpu_emi>; + }; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts index 0f49d5764ff3..3443013b5971 100644 --- a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts +++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts @@ -98,3 +98,43 @@ }; }; }; + +&wifi { + status = "okay"; + pinctrl-names = "default", "dbdc"; + pinctrl-0 = <&wf_2g_5g_pins>; + pinctrl-1 = <&wf_dbdc_pins>; +}; + +&pio { + wf_2g_5g_pins: wf-2g-5g-pins { + mux { + function = "wifi"; + groups = "wf_2g", "wf_5g"; + }; + conf { + pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4", + "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6", + "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10", + "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1", + "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0", + "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8", + "WF1_TOP_CLK", "WF1_TOP_DATA"; + drive-strength = <4>; + }; + }; + + wf_dbdc_pins: wf-dbdc-pins { + mux { + function = "wifi"; + groups = "wf_dbdc"; + }; + conf { + pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4", + "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6", + "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10", + "WF0_TOP_CLK", "WF0_TOP_DATA"; + drive-strength = <4>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8167.dtsi b/arch/arm64/boot/dts/mediatek/mt8167.dtsi index 54655f2feb04..fbe1a1128cc6 100644 --- a/arch/arm64/boot/dts/mediatek/mt8167.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8167.dtsi @@ -36,9 +36,8 @@ }; scpsys: syscon@10006000 { - compatible = "syscon", "simple-mfd"; + compatible = "mediatek,mt8167-scpsys", "syscon", "simple-mfd"; reg = <0 0x10006000 0 0x1000>; - #power-domain-cells = <1>; spm: power-controller { compatible = "mediatek,mt8167-power-controller"; diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi index 6d9513c1f5bf..7640b5158ff9 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi @@ -444,9 +444,8 @@ }; scpsys: syscon@10006000 { - compatible = "syscon", "simple-mfd"; + compatible = "mediatek,mt8173-scpsys", "syscon", "simple-mfd"; reg = <0 0x10006000 0 0x1000>; - #power-domain-cells = <1>; /* System Power Manager */ spm: power-controller { @@ -1468,7 +1467,7 @@ clock-names = "venc_sel"; assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>; assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_VENC>; + power-domains = <&spm MT8173_POWER_DOMAIN_VENC>; }; jpegdec: jpegdec@18004000 { @@ -1519,7 +1518,7 @@ assigned-clocks = <&topckgen CLK_TOP_VENC_LT_SEL>; assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL_370P5>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_VENC_LT>; + power-domains = <&spm MT8173_POWER_DOMAIN_VENC_LT>; }; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts index 530e0c9ce0c9..a1d01639df30 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts @@ -7,6 +7,7 @@ /dts-v1/; #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> #include "mt8183.dtsi" #include "mt6358.dtsi" @@ -122,6 +123,18 @@ clock-frequency = <100000>; }; +&keyboard { + pinctrl-names = "default"; + pinctrl-0 = <&keyboard_pins>; + status = "okay"; + linux,keymap = <MATRIX_KEY(0x00, 0x00, KEY_VOLUMEDOWN) + MATRIX_KEY(0x01, 0x00, KEY_VOLUMEUP)>; + keypad,num-rows = <2>; + keypad,num-columns = <1>; + debounce-delay-ms = <32>; + mediatek,keys-per-group = <2>; +}; + &mmc0 { status = "okay"; pinctrl-names = "default", "state_uhs"; @@ -226,6 +239,14 @@ }; }; + keyboard_pins: keyboard { + pins_keyboard { + pinmux = <PINMUX_GPIO91__FUNC_KPROW1>, + <PINMUX_GPIO92__FUNC_KPROW0>, + <PINMUX_GPIO93__FUNC_KPCOL0>; + }; + }; + mmc0_pins_default: mmc0-pins-default { pins_cmd_dat { pinmux = <PINMUX_GPIO123__FUNC_MSDC0_DAT0>, diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi index 9d32871973a2..a70b669c49ba 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi @@ -761,9 +761,8 @@ }; scpsys: syscon@10006000 { - compatible = "syscon", "simple-mfd"; + compatible = "mediatek,mt8183-scpsys", "syscon", "simple-mfd"; reg = <0 0x10006000 0 0x1000>; - #power-domain-cells = <1>; /* System Power Manager */ spm: power-controller { @@ -943,6 +942,15 @@ clock-names = "spi", "wrap"; }; + keyboard: keyboard@10010000 { + compatible = "mediatek,mt6779-keypad"; + reg = <0 0x10010000 0 0x1000>; + interrupts = <GIC_SPI 186 IRQ_TYPE_EDGE_FALLING>; + clocks = <&clk26m>; + clock-names = "kpd"; + status = "disabled"; + }; + scp: scp@10500000 { compatible = "mediatek,mt8183-scp"; reg = <0 0x10500000 0 0x80000>, @@ -1691,6 +1699,60 @@ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>; }; + mdp3-rdma0@14001000 { + compatible = "mediatek,mt8183-mdp3-rdma"; + reg = <0 0x14001000 0 0x1000>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>; + mediatek,gce-events = <CMDQ_EVENT_MDP_RDMA0_SOF>, + <CMDQ_EVENT_MDP_RDMA0_EOF>; + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_MDP_RDMA0>, + <&mmsys CLK_MM_MDP_RSZ1>; + iommus = <&iommu M4U_PORT_MDP_RDMA0>; + mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST 0>, + <&gce 21 CMDQ_THR_PRIO_LOWEST 0>; + }; + + mdp3-rsz0@14003000 { + compatible = "mediatek,mt8183-mdp3-rsz"; + reg = <0 0x14003000 0 0x1000>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x3000 0x1000>; + mediatek,gce-events = <CMDQ_EVENT_MDP_RSZ0_SOF>, + <CMDQ_EVENT_MDP_RSZ0_EOF>; + clocks = <&mmsys CLK_MM_MDP_RSZ0>; + }; + + mdp3-rsz1@14004000 { + compatible = "mediatek,mt8183-mdp3-rsz"; + reg = <0 0x14004000 0 0x1000>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x4000 0x1000>; + mediatek,gce-events = <CMDQ_EVENT_MDP_RSZ1_SOF>, + <CMDQ_EVENT_MDP_RSZ1_EOF>; + clocks = <&mmsys CLK_MM_MDP_RSZ1>; + }; + + mdp3-wrot0@14005000 { + compatible = "mediatek,mt8183-mdp3-wrot"; + reg = <0 0x14005000 0 0x1000>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>; + mediatek,gce-events = <CMDQ_EVENT_MDP_WROT0_SOF>, + <CMDQ_EVENT_MDP_WROT0_EOF>; + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_MDP_WROT0>; + iommus = <&iommu M4U_PORT_MDP_WROT0>; + }; + + mdp3-wdma@14006000 { + compatible = "mediatek,mt8183-mdp3-wdma"; + reg = <0 0x14006000 0 0x1000>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x6000 0x1000>; + mediatek,gce-events = <CMDQ_EVENT_MDP_WDMA0_SOF>, + <CMDQ_EVENT_MDP_WDMA0_EOF>; + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_MDP_WDMA0>; + iommus = <&iommu M4U_PORT_MDP_WDMA0>; + }; + ovl0: ovl@14008000 { compatible = "mediatek,mt8183-disp-ovl"; reg = <0 0x14008000 0 0x1000>; @@ -1834,6 +1896,15 @@ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; }; + mdp3-ccorr@1401c000 { + compatible = "mediatek,mt8183-mdp3-ccorr"; + reg = <0 0x1401c000 0 0x1000>; + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0xc000 0x1000>; + mediatek,gce-events = <CMDQ_EVENT_MDP_CCORR_SOF>, + <CMDQ_EVENT_MDP_CCORR_EOF>; + clocks = <&mmsys CLK_MM_MDP_CCORR>; + }; + imgsys: syscon@15020000 { compatible = "mediatek,mt8183-imgsys", "syscon"; reg = <0 0x15020000 0 0x1000>; diff --git a/arch/arm64/boot/dts/mediatek/mt8186-evb.dts b/arch/arm64/boot/dts/mediatek/mt8186-evb.dts new file mode 100644 index 000000000000..ed74a3617c13 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8186-evb.dts @@ -0,0 +1,220 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Copyright (C) 2022 MediaTek Inc. + */ +/dts-v1/; +#include "mt8186.dtsi" + +/ { + model = "MediaTek MT8186 evaluation board"; + compatible = "mediatek,mt8186-evb", "mediatek,mt8186"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:921600n8"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x80000000>; + }; +}; + +&i2c0 { + status = "okay"; + + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; +}; + +&i2c1 { + status = "okay"; + + clock-frequency = <400000>; + i2c-scl-internal-delay-ns = <8000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; +}; + +&i2c2 { + status = "okay"; + + clock-frequency = <400000>; + i2c-scl-internal-delay-ns = <10000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; +}; + +&i2c3 { + status = "okay"; + + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; +}; + +&i2c4 { + status = "okay"; + + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins>; +}; + +&i2c5 { + status = "okay"; + + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_pins>; +}; + +&i2c6 { + status = "okay"; + + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_pins>; +}; + +&i2c7 { + status = "okay"; + + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c7_pins>; +}; + +&i2c8 { + status = "okay"; + + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c8_pins>; +}; + +&i2c9 { + status = "okay"; + + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c9_pins>; +}; + +&pio { + i2c0_pins: i2c0-default-pins { + pins-bus { + pinmux = <PINMUX_GPIO128__FUNC_SDA0>, + <PINMUX_GPIO127__FUNC_SCL0>; + bias-disable; + drive-strength-microamp = <1000>; + input-enable; + }; + }; + + i2c1_pins: i2c1-default-pins { + pins-bus { + pinmux = <PINMUX_GPIO130__FUNC_SDA1>, + <PINMUX_GPIO129__FUNC_SCL1>; + bias-disable; + drive-strength-microamp = <1000>; + input-enable; + }; + }; + + i2c2_pins: i2c2-default-pins { + pins-bus { + pinmux = <PINMUX_GPIO132__FUNC_SDA2>, + <PINMUX_GPIO131__FUNC_SCL2>; + bias-disable; + drive-strength-microamp = <1000>; + input-enable; + }; + }; + + i2c3_pins: i2c3-default-pins { + pins-bus { + pinmux = <PINMUX_GPIO134__FUNC_SDA3>, + <PINMUX_GPIO133__FUNC_SCL3>; + bias-disable; + drive-strength-microamp = <1000>; + input-enable; + }; + }; + + i2c4_pins: i2c4-default-pins { + pins-bus { + pinmux = <PINMUX_GPIO136__FUNC_SDA4>, + <PINMUX_GPIO135__FUNC_SCL4>; + bias-disable; + drive-strength-microamp = <1000>; + input-enable; + }; + }; + + i2c5_pins: i2c5-default-pins { + pins-bus { + pinmux = <PINMUX_GPIO138__FUNC_SDA5>, + <PINMUX_GPIO137__FUNC_SCL5>; + bias-disable; + drive-strength-microamp = <1000>; + input-enable; + }; + }; + + i2c6_pins: i2c6-default-pins { + pins-bus { + pinmux = <PINMUX_GPIO140__FUNC_SDA6>, + <PINMUX_GPIO139__FUNC_SCL6>; + bias-pull-up = <MTK_PULL_SET_RSEL_001>; + drive-strength-microamp = <1000>; + input-enable; + }; + }; + + i2c7_pins: i2c7-default-pins { + pins-bus { + pinmux = <PINMUX_GPIO142__FUNC_SDA7>, + <PINMUX_GPIO141__FUNC_SCL7>; + bias-disable; + drive-strength-microamp = <1000>; + input-enable; + }; + }; + + i2c8_pins: i2c8-default-pins { + pins-bus { + pinmux = <PINMUX_GPIO144__FUNC_SDA8>, + <PINMUX_GPIO143__FUNC_SCL8>; + bias-disable; + drive-strength-microamp = <1000>; + input-enable; + }; + }; + + i2c9_pins: i2c9-default-pins { + pins-bus { + pinmux = <PINMUX_GPIO146__FUNC_SDA9>, + <PINMUX_GPIO145__FUNC_SCL9>; + bias-pull-up = <MTK_PULL_SET_RSEL_001>; + drive-strength-microamp = <1000>; + input-enable; + }; + }; +}; + +&u3phy0 { + status = "okay"; +}; + +&u3phy1 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8186.dtsi b/arch/arm64/boot/dts/mediatek/mt8186.dtsi new file mode 100644 index 000000000000..64693c17af9e --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8186.dtsi @@ -0,0 +1,819 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Copyright (C) 2022 MediaTek Inc. + * Author: Allen-KH Cheng <allen-kh.cheng@mediatek.com> + */ +/dts-v1/; +#include <dt-bindings/clock/mt8186-clk.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/mt8186-pinfunc.h> +#include <dt-bindings/power/mt8186-power.h> +#include <dt-bindings/phy/phy.h> +#include <dt-bindings/reset/mt8186-resets.h> + +/ { + compatible = "mediatek,mt8186"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + + core2 { + cpu = <&cpu2>; + }; + + core3 { + cpu = <&cpu3>; + }; + + core4 { + cpu = <&cpu4>; + }; + + core5 { + cpu = <&cpu5>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu6>; + }; + + core1 { + cpu = <&cpu7>; + }; + }; + }; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x000>; + enable-method = "psci"; + clock-frequency = <2000000000>; + capacity-dmips-mhz = <382>; + cpu-idle-states = <&cpu_off_l &cluster_off_l>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + }; + + cpu1: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x100>; + enable-method = "psci"; + clock-frequency = <2000000000>; + capacity-dmips-mhz = <382>; + cpu-idle-states = <&cpu_off_l &cluster_off_l>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + }; + + cpu2: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x200>; + enable-method = "psci"; + clock-frequency = <2000000000>; + capacity-dmips-mhz = <382>; + cpu-idle-states = <&cpu_off_l &cluster_off_l>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + }; + + cpu3: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x300>; + enable-method = "psci"; + clock-frequency = <2000000000>; + capacity-dmips-mhz = <382>; + cpu-idle-states = <&cpu_off_l &cluster_off_l>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + }; + + cpu4: cpu@400 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x400>; + enable-method = "psci"; + clock-frequency = <2000000000>; + capacity-dmips-mhz = <382>; + cpu-idle-states = <&cpu_off_l &cluster_off_l>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + }; + + cpu5: cpu@500 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x500>; + enable-method = "psci"; + clock-frequency = <2000000000>; + capacity-dmips-mhz = <382>; + cpu-idle-states = <&cpu_off_l &cluster_off_l>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + }; + + cpu6: cpu@600 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x600>; + enable-method = "psci"; + clock-frequency = <2050000000>; + capacity-dmips-mhz = <1024>; + cpu-idle-states = <&cpu_off_b &cluster_off_b>; + next-level-cache = <&l2_1>; + #cooling-cells = <2>; + }; + + cpu7: cpu@700 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x700>; + enable-method = "psci"; + clock-frequency = <2050000000>; + capacity-dmips-mhz = <1024>; + cpu-idle-states = <&cpu_off_b &cluster_off_b>; + next-level-cache = <&l2_1>; + #cooling-cells = <2>; + }; + + idle-states { + entry-method = "psci"; + + cpu_off_l: cpu-off-l { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x00010001>; + local-timer-stop; + entry-latency-us = <50>; + exit-latency-us = <100>; + min-residency-us = <1600>; + }; + + cpu_off_b: cpu-off-b { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x00010001>; + local-timer-stop; + entry-latency-us = <50>; + exit-latency-us = <100>; + min-residency-us = <1400>; + }; + + cluster_off_l: cluster-off-l { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x01010001>; + local-timer-stop; + entry-latency-us = <100>; + exit-latency-us = <250>; + min-residency-us = <2100>; + }; + + cluster_off_b: cluster-off-b { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x01010001>; + local-timer-stop; + entry-latency-us = <100>; + exit-latency-us = <250>; + min-residency-us = <1900>; + }; + }; + + l2_0: l2-cache0 { + compatible = "cache"; + next-level-cache = <&l3_0>; + }; + + l2_1: l2-cache1 { + compatible = "cache"; + next-level-cache = <&l3_0>; + }; + + l3_0: l3-cache { + compatible = "cache"; + }; + }; + + clk13m: oscillator-13m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <13000000>; + clock-output-names = "clk13m"; + }; + + clk26m: oscillator-26m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + clock-output-names = "clk26m"; + }; + + clk32k: oscillator-32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "clk32k"; + }; + + pmu-a55 { + compatible = "arm,cortex-a55-pmu"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster0>; + }; + + pmu-a76 { + compatible = "arm,cortex-a76-pmu"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster1>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>; + }; + + soc { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + ranges; + + gic: interrupt-controller@c000000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <4>; + #redistributor-regions = <1>; + interrupt-parent = <&gic>; + interrupt-controller; + reg = <0 0x0c000000 0 0x40000>, + <0 0x0c040000 0 0x200000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>; + + ppi-partitions { + ppi_cluster0: interrupt-partition-0 { + affinity = <&cpu0 &cpu1 &cpu2 &cpu3 &cpu4 &cpu5>; + }; + + ppi_cluster1: interrupt-partition-1 { + affinity = <&cpu6 &cpu7>; + }; + }; + }; + + mcusys: syscon@c53a000 { + compatible = "mediatek,mt8186-mcusys", "syscon"; + reg = <0 0xc53a000 0 0x1000>; + #clock-cells = <1>; + }; + + topckgen: syscon@10000000 { + compatible = "mediatek,mt8186-topckgen", "syscon"; + reg = <0 0x10000000 0 0x1000>; + #clock-cells = <1>; + }; + + infracfg_ao: syscon@10001000 { + compatible = "mediatek,mt8186-infracfg_ao", "syscon"; + reg = <0 0x10001000 0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + pericfg: syscon@10003000 { + compatible = "mediatek,mt8186-pericfg", "syscon"; + reg = <0 0x10003000 0 0x1000>; + }; + + pio: pinctrl@10005000 { + compatible = "mediatek,mt8186-pinctrl"; + reg = <0 0x10005000 0 0x1000>, + <0 0x10002000 0 0x0200>, + <0 0x10002200 0 0x0200>, + <0 0x10002400 0 0x0200>, + <0 0x10002600 0 0x0200>, + <0 0x10002a00 0 0x0200>, + <0 0x10002c00 0 0x0200>, + <0 0x1000b000 0 0x1000>; + reg-names = "iocfg0", "iocfg_lt", "iocfg_lm", "iocfg_lb", + "iocfg_bl", "iocfg_rb", "iocfg_rt", "eint"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pio 0 0 185>; + interrupt-controller; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH 0>; + #interrupt-cells = <2>; + }; + + watchdog: watchdog@10007000 { + compatible = "mediatek,mt8186-wdt", + "mediatek,mt6589-wdt"; + mediatek,disable-extrst; + reg = <0 0x10007000 0 0x1000>; + #reset-cells = <1>; + }; + + apmixedsys: syscon@1000c000 { + compatible = "mediatek,mt8186-apmixedsys", "syscon"; + reg = <0 0x1000c000 0 0x1000>; + #clock-cells = <1>; + }; + + pwrap: pwrap@1000d000 { + compatible = "mediatek,mt8186-pwrap", "syscon"; + reg = <0 0x1000d000 0 0x1000>; + reg-names = "pwrap"; + interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&infracfg_ao CLK_INFRA_AO_PMIC_AP>, + <&infracfg_ao CLK_INFRA_AO_PMIC_TMR>; + clock-names = "spi", "wrap"; + }; + + systimer: timer@10017000 { + compatible = "mediatek,mt8186-timer", + "mediatek,mt6765-timer"; + reg = <0 0x10017000 0 0x1000>; + interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&clk13m>; + }; + + scp: scp@10500000 { + compatible = "mediatek,mt8186-scp"; + reg = <0 0x10500000 0 0x40000>, + <0 0x105c0000 0 0x19080>; + reg-names = "sram", "cfg"; + interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + nor_flash: spi@11000000 { + compatible = "mediatek,mt8186-nor"; + reg = <0 0x11000000 0 0x1000>; + clocks = <&topckgen CLK_TOP_SPINOR>, + <&infracfg_ao CLK_INFRA_AO_SPINOR>, + <&infracfg_ao CLK_INFRA_AO_FLASHIF_133M>, + <&infracfg_ao CLK_INFRA_AO_FLASHIF_66M>; + clock-names = "spi", "sf", "axi", "axi_s"; + assigned-clocks = <&topckgen CLK_TOP_SPINOR>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D3_D8>; + interrupts = <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH 0>; + status = "disabled"; + }; + + auxadc: adc@11001000 { + compatible = "mediatek,mt8186-auxadc", "mediatek,mt8173-auxadc"; + reg = <0 0x11001000 0 0x1000>; + #io-channel-cells = <1>; + clocks = <&infracfg_ao CLK_INFRA_AO_AUXADC>; + clock-names = "main"; + }; + + uart0: serial@11002000 { + compatible = "mediatek,mt8186-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11002000 0 0x1000>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART0>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + uart1: serial@11003000 { + compatible = "mediatek,mt8186-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11003000 0 0x1000>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART1>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + i2c0: i2c@11007000 { + compatible = "mediatek,mt8186-i2c"; + reg = <0 0x11007000 0 0x1000>, + <0 0x10200100 0 0x100>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&imp_iic_wrap CLK_IMP_IIC_WRAP_AP_CLOCK_I2C0>, + <&infracfg_ao CLK_INFRA_AO_AP_DMA>; + clock-names = "main", "dma"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@11008000 { + compatible = "mediatek,mt8186-i2c"; + reg = <0 0x11008000 0 0x1000>, + <0 0x10200200 0 0x100>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&imp_iic_wrap CLK_IMP_IIC_WRAP_AP_CLOCK_I2C1>, + <&infracfg_ao CLK_INFRA_AO_AP_DMA>; + clock-names = "main", "dma"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@11009000 { + compatible = "mediatek,mt8186-i2c"; + reg = <0 0x11009000 0 0x1000>, + <0 0x10200300 0 0x180>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&imp_iic_wrap CLK_IMP_IIC_WRAP_AP_CLOCK_I2C2>, + <&infracfg_ao CLK_INFRA_AO_AP_DMA>; + clock-names = "main", "dma"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@1100f000 { + compatible = "mediatek,mt8186-i2c"; + reg = <0 0x1100f000 0 0x1000>, + <0 0x10200480 0 0x100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&imp_iic_wrap CLK_IMP_IIC_WRAP_AP_CLOCK_I2C3>, + <&infracfg_ao CLK_INFRA_AO_AP_DMA>; + clock-names = "main", "dma"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@11011000 { + compatible = "mediatek,mt8186-i2c"; + reg = <0 0x11011000 0 0x1000>, + <0 0x10200580 0 0x180>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&imp_iic_wrap CLK_IMP_IIC_WRAP_AP_CLOCK_I2C4>, + <&infracfg_ao CLK_INFRA_AO_AP_DMA>; + clock-names = "main", "dma"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@11016000 { + compatible = "mediatek,mt8186-i2c"; + reg = <0 0x11016000 0 0x1000>, + <0 0x10200700 0 0x100>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&imp_iic_wrap CLK_IMP_IIC_WRAP_AP_CLOCK_I2C5>, + <&infracfg_ao CLK_INFRA_AO_AP_DMA>; + clock-names = "main", "dma"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c6: i2c@1100d000 { + compatible = "mediatek,mt8186-i2c"; + reg = <0 0x1100d000 0 0x1000>, + <0 0x10200800 0 0x100>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&imp_iic_wrap CLK_IMP_IIC_WRAP_AP_CLOCK_I2C6>, + <&infracfg_ao CLK_INFRA_AO_AP_DMA>; + clock-names = "main", "dma"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c7: i2c@11004000 { + compatible = "mediatek,mt8186-i2c"; + reg = <0 0x11004000 0 0x1000>, + <0 0x10200900 0 0x180>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&imp_iic_wrap CLK_IMP_IIC_WRAP_AP_CLOCK_I2C7>, + <&infracfg_ao CLK_INFRA_AO_AP_DMA>; + clock-names = "main", "dma"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c8: i2c@11005000 { + compatible = "mediatek,mt8186-i2c"; + reg = <0 0x11005000 0 0x1000>, + <0 0x10200A80 0 0x180>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&imp_iic_wrap CLK_IMP_IIC_WRAP_AP_CLOCK_I2C8>, + <&infracfg_ao CLK_INFRA_AO_AP_DMA>; + clock-names = "main", "dma"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi0: spi@1100a000 { + compatible = "mediatek,mt8186-spi", "mediatek,mt6765-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x1100a000 0 0x1000>; + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&topckgen CLK_TOP_MAINPLL_D5>, + <&topckgen CLK_TOP_SPI>, + <&infracfg_ao CLK_INFRA_AO_SPI0>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + pwm0: pwm@1100e000 { + compatible = "mediatek,mt8186-disp-pwm", "mediatek,mt8183-disp-pwm"; + reg = <0 0x1100e000 0 0x1000>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH 0>; + #pwm-cells = <2>; + clocks = <&topckgen CLK_TOP_DISP_PWM>, + <&infracfg_ao CLK_INFRA_AO_DISP_PWM>; + clock-names = "main", "mm"; + status = "disabled"; + }; + + spi1: spi@11010000 { + compatible = "mediatek,mt8186-spi", "mediatek,mt6765-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11010000 0 0x1000>; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&topckgen CLK_TOP_MAINPLL_D5>, + <&topckgen CLK_TOP_SPI>, + <&infracfg_ao CLK_INFRA_AO_SPI1>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi2: spi@11012000 { + compatible = "mediatek,mt8186-spi", "mediatek,mt6765-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11012000 0 0x1000>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&topckgen CLK_TOP_MAINPLL_D5>, + <&topckgen CLK_TOP_SPI>, + <&infracfg_ao CLK_INFRA_AO_SPI2>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi3: spi@11013000 { + compatible = "mediatek,mt8186-spi", "mediatek,mt6765-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11013000 0 0x1000>; + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&topckgen CLK_TOP_MAINPLL_D5>, + <&topckgen CLK_TOP_SPI>, + <&infracfg_ao CLK_INFRA_AO_SPI3>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi4: spi@11014000 { + compatible = "mediatek,mt8186-spi", "mediatek,mt6765-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11014000 0 0x1000>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&topckgen CLK_TOP_MAINPLL_D5>, + <&topckgen CLK_TOP_SPI>, + <&infracfg_ao CLK_INFRA_AO_SPI4>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi5: spi@11015000 { + compatible = "mediatek,mt8186-spi", "mediatek,mt6765-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11015000 0 0x1000>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&topckgen CLK_TOP_MAINPLL_D5>, + <&topckgen CLK_TOP_SPI>, + <&infracfg_ao CLK_INFRA_AO_SPI5>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + imp_iic_wrap: clock-controller@11017000 { + compatible = "mediatek,mt8186-imp_iic_wrap"; + reg = <0 0x11017000 0 0x1000>; + #clock-cells = <1>; + }; + + uart2: serial@11018000 { + compatible = "mediatek,mt8186-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11018000 0 0x1000>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART2>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + i2c9: i2c@11019000 { + compatible = "mediatek,mt8186-i2c"; + reg = <0 0x11019000 0 0x1000>, + <0 0x10200c00 0 0x180>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&imp_iic_wrap CLK_IMP_IIC_WRAP_AP_CLOCK_I2C9>, + <&infracfg_ao CLK_INFRA_AO_AP_DMA>; + clock-names = "main", "dma"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + mmc0: mmc@11230000 { + compatible = "mediatek,mt8186-mmc", + "mediatek,mt8183-mmc"; + reg = <0 0x11230000 0 0x1000>, + <0 0x11cd0000 0 0x1000>; + clocks = <&topckgen CLK_TOP_MSDC50_0>, + <&infracfg_ao CLK_INFRA_AO_MSDC0>, + <&infracfg_ao CLK_INFRA_AO_MSDC0_SRC>; + clock-names = "source", "hclk", "source_cg"; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH 0>; + assigned-clocks = <&topckgen CLK_TOP_MSDC50_0>; + assigned-clock-parents = <&apmixedsys CLK_APMIXED_MSDCPLL>; + status = "disabled"; + }; + + mmc1: mmc@11240000 { + compatible = "mediatek,mt8186-mmc", + "mediatek,mt8183-mmc"; + reg = <0 0x11240000 0 0x1000>, + <0 0x11c90000 0 0x1000>; + clocks = <&topckgen CLK_TOP_MSDC30_1>, + <&infracfg_ao CLK_INFRA_AO_MSDC1>, + <&infracfg_ao CLK_INFRA_AO_MSDC1_SRC>; + clock-names = "source", "hclk", "source_cg"; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH 0>; + assigned-clocks = <&topckgen CLK_TOP_MSDC30_1>; + assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>; + status = "disabled"; + }; + + u3phy0: t-phy@11c80000 { + compatible = "mediatek,mt8186-tphy", + "mediatek,generic-tphy-v2"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x11c80000 0x1000>; + status = "disabled"; + + u2port1: usb-phy@0 { + reg = <0x0 0x700>; + clocks = <&clk26m>; + clock-names = "ref"; + #phy-cells = <1>; + }; + + u3port1: usb-phy@700 { + reg = <0x700 0x900>; + clocks = <&clk26m>; + clock-names = "ref"; + #phy-cells = <1>; + }; + }; + + u3phy1: t-phy@11ca0000 { + compatible = "mediatek,mt8186-tphy", + "mediatek,generic-tphy-v2"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x11ca0000 0x1000>; + status = "disabled"; + + u2port0: usb-phy@0 { + reg = <0x0 0x700>; + clocks = <&clk26m>; + clock-names = "ref"; + #phy-cells = <1>; + mediatek,discth = <0x8>; + }; + }; + + efuse: efuse@11cb0000 { + compatible = "mediatek,mt8186-efuse", "mediatek,efuse"; + reg = <0 0x11cb0000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + }; + + mipi_tx0: dsi-phy@11cc0000 { + compatible = "mediatek,mt8183-mipi-tx"; + reg = <0 0x11cc0000 0 0x1000>; + clocks = <&clk26m>; + #clock-cells = <0>; + #phy-cells = <0>; + clock-output-names = "mipi_tx0_pll"; + status = "disabled"; + }; + + mfgsys: clock-controller@13000000 { + compatible = "mediatek,mt8186-mfgsys"; + reg = <0 0x13000000 0 0x1000>; + #clock-cells = <1>; + }; + + mmsys: syscon@14000000 { + compatible = "mediatek,mt8186-mmsys", "syscon"; + reg = <0 0x14000000 0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + wpesys: clock-controller@14020000 { + compatible = "mediatek,mt8186-wpesys"; + reg = <0 0x14020000 0 0x1000>; + #clock-cells = <1>; + }; + + imgsys1: clock-controller@15020000 { + compatible = "mediatek,mt8186-imgsys1"; + reg = <0 0x15020000 0 0x1000>; + #clock-cells = <1>; + }; + + imgsys2: clock-controller@15820000 { + compatible = "mediatek,mt8186-imgsys2"; + reg = <0 0x15820000 0 0x1000>; + #clock-cells = <1>; + }; + + vdecsys: clock-controller@1602f000 { + compatible = "mediatek,mt8186-vdecsys"; + reg = <0 0x1602f000 0 0x1000>; + #clock-cells = <1>; + }; + + vencsys: clock-controller@17000000 { + compatible = "mediatek,mt8186-vencsys"; + reg = <0 0x17000000 0 0x1000>; + #clock-cells = <1>; + }; + + camsys: clock-controller@1a000000 { + compatible = "mediatek,mt8186-camsys"; + reg = <0 0x1a000000 0 0x1000>; + #clock-cells = <1>; + }; + + camsys_rawa: clock-controller@1a04f000 { + compatible = "mediatek,mt8186-camsys_rawa"; + reg = <0 0x1a04f000 0 0x1000>; + #clock-cells = <1>; + }; + + camsys_rawb: clock-controller@1a06f000 { + compatible = "mediatek,mt8186-camsys_rawb"; + reg = <0 0x1a06f000 0 0x1000>; + #clock-cells = <1>; + }; + + mdpsys: clock-controller@1b000000 { + compatible = "mediatek,mt8186-mdpsys"; + reg = <0 0x1b000000 0 0x1000>; + #clock-cells = <1>; + }; + + ipesys: clock-controller@1c000000 { + compatible = "mediatek,mt8186-ipesys"; + reg = <0 0x1c000000 0 0x1000>; + #clock-cells = <1>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi index cbae5a5ee4a0..6b20376191a7 100644 --- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi @@ -6,12 +6,14 @@ /dts-v1/; #include <dt-bindings/clock/mt8192-clk.h> +#include <dt-bindings/gce/mt8192-gce.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/memory/mt8192-larb-port.h> #include <dt-bindings/pinctrl/mt8192-pinfunc.h> #include <dt-bindings/phy/phy.h> #include <dt-bindings/power/mt8192-power.h> +#include <dt-bindings/reset/mt8192-resets.h> / { compatible = "mediatek,mt8192"; @@ -19,6 +21,14 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + ovl0 = &ovl0; + ovl-2l0 = &ovl_2l0; + ovl-2l2 = &ovl_2l2; + rdma0 = &rdma0; + rdma4 = &rdma4; + }; + clk26m: oscillator0 { compatible = "fixed-clock"; #clock-cells = <0>; @@ -306,9 +316,8 @@ }; scpsys: syscon@10006000 { - compatible = "syscon", "simple-mfd"; + compatible = "mediatek,mt8192-scpsys", "syscon", "simple-mfd"; reg = <0 0x10006000 0 0x1000>; - #power-domain-cells = <1>; /* System Power Manager */ spm: power-controller { @@ -553,6 +562,15 @@ assigned-clock-parents = <&topckgen CLK_TOP_OSC_D10>; }; + gce: mailbox@10228000 { + compatible = "mediatek,mt8192-gce"; + reg = <0 0x10228000 0 0x4000>; + interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH 0>; + #mbox-cells = <2>; + clocks = <&infracfg CLK_INFRA_GCE>; + clock-names = "gce"; + }; + scp_adsp: clock-controller@10720000 { compatible = "mediatek,mt8192-scp_adsp"; reg = <0 0x10720000 0 0x1000>; @@ -599,6 +617,17 @@ status = "disabled"; }; + pwm0: pwm@1100e000 { + compatible = "mediatek,mt8183-disp-pwm"; + reg = <0 0x1100e000 0 0x1000>; + interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH 0>; + #pwm-cells = <2>; + clocks = <&topckgen CLK_TOP_DISP_PWM_SEL>, + <&infracfg CLK_INFRA_DISP_PWM>; + clock-names = "main", "mm"; + status = "disabled"; + }; + spi1: spi@11010000 { compatible = "mediatek,mt8192-spi", "mediatek,mt6765-spi"; @@ -724,9 +753,12 @@ assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>, <&topckgen CLK_TOP_UNIVPLL_D5_D4>; clocks = <&infracfg CLK_INFRA_SSUSB>, - <&infracfg CLK_INFRA_SSUSB_XHCI>, - <&apmixedsys CLK_APMIXED_USBPLL>; - clock-names = "sys_ck", "xhci_ck", "ref_ck"; + <&apmixedsys CLK_APMIXED_USBPLL>, + <&clk26m>, + <&clk26m>, + <&infracfg CLK_INFRA_SSUSB_XHCI>; + clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", + "xhci_ck"; wakeup-source; mediatek,syscon-wakeup = <&pericfg 0x420 102>; status = "disabled"; @@ -1084,6 +1116,16 @@ }; }; + mipi_tx0: dsi-phy@11e50000 { + compatible = "mediatek,mt8183-mipi-tx"; + reg = <0 0x11e50000 0 0x1000>; + clocks = <&apmixedsys CLK_APMIXED_MIPID26M>; + #clock-cells = <0>; + #phy-cells = <0>; + clock-output-names = "mipi_tx0_pll"; + status = "disabled"; + }; + i2c0: i2c@11f00000 { compatible = "mediatek,mt8192-i2c"; reg = <0 0x11f00000 0 0x1000>, @@ -1166,6 +1208,20 @@ compatible = "mediatek,mt8192-mmsys", "syscon"; reg = <0 0x14000000 0 0x1000>; #clock-cells = <1>; + #reset-cells = <1>; + mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>, + <&gce 1 CMDQ_THR_PRIO_HIGHEST>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>; + }; + + mutex: mutex@14001000 { + compatible = "mediatek,mt8192-disp-mutex"; + reg = <0 0x14001000 0 0x1000>; + interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&mmsys CLK_MM_DISP_MUTEX0>; + mediatek,gce-events = <CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_0>, + <CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_1>; + power-domains = <&spm MT8192_POWER_DOMAIN_DISP>; }; smi_common: smi@14002000 { @@ -1199,6 +1255,140 @@ power-domains = <&spm MT8192_POWER_DOMAIN_DISP>; }; + ovl0: ovl@14005000 { + compatible = "mediatek,mt8192-disp-ovl"; + reg = <0 0x14005000 0 0x1000>; + interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&mmsys CLK_MM_DISP_OVL0>; + iommus = <&iommu0 M4U_PORT_L0_OVL_RDMA0>, + <&iommu0 M4U_PORT_L0_OVL_RDMA0_HDR>; + power-domains = <&spm MT8192_POWER_DOMAIN_DISP>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>; + }; + + ovl_2l0: ovl@14006000 { + compatible = "mediatek,mt8192-disp-ovl-2l"; + reg = <0 0x14006000 0 0x1000>; + interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH 0>; + power-domains = <&spm MT8192_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_DISP_OVL0_2L>; + iommus = <&iommu0 M4U_PORT_L1_OVL_2L_RDMA0>, + <&iommu0 M4U_PORT_L1_OVL_2L_RDMA0_HDR>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x6000 0x1000>; + }; + + rdma0: rdma@14007000 { + compatible = "mediatek,mt8192-disp-rdma", + "mediatek,mt8183-disp-rdma"; + reg = <0 0x14007000 0 0x1000>; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&mmsys CLK_MM_DISP_RDMA0>; + iommus = <&iommu0 M4U_PORT_L0_DISP_RDMA0>; + mediatek,rdma-fifo-size = <5120>; + power-domains = <&spm MT8192_POWER_DOMAIN_DISP>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x7000 0x1000>; + }; + + color0: color@14009000 { + compatible = "mediatek,mt8192-disp-color", + "mediatek,mt8173-disp-color"; + reg = <0 0x14009000 0 0x1000>; + interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH 0>; + power-domains = <&spm MT8192_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_DISP_COLOR0>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x9000 0x1000>; + }; + + ccorr0: ccorr@1400a000 { + compatible = "mediatek,mt8192-disp-ccorr"; + reg = <0 0x1400a000 0 0x1000>; + interrupts = <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH 0>; + power-domains = <&spm MT8192_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_DISP_CCORR0>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xa000 0x1000>; + }; + + aal0: aal@1400b000 { + compatible = "mediatek,mt8192-disp-aal", + "mediatek,mt8183-disp-aal"; + reg = <0 0x1400b000 0 0x1000>; + interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH 0>; + power-domains = <&spm MT8192_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_DISP_AAL0>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xb000 0x1000>; + }; + + gamma0: gamma@1400c000 { + compatible = "mediatek,mt8192-disp-gamma", + "mediatek,mt8183-disp-gamma"; + reg = <0 0x1400c000 0 0x1000>; + interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH 0>; + power-domains = <&spm MT8192_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_DISP_GAMMA0>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>; + }; + + postmask0: postmask@1400d000 { + compatible = "mediatek,mt8192-disp-postmask"; + reg = <0 0x1400d000 0 0x1000>; + interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH 0>; + power-domains = <&spm MT8192_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_DISP_POSTMASK0>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xd000 0x1000>; + }; + + dither0: dither@1400e000 { + compatible = "mediatek,mt8192-disp-dither", + "mediatek,mt8183-disp-dither"; + reg = <0 0x1400e000 0 0x1000>; + interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH 0>; + power-domains = <&spm MT8192_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_DISP_DITHER0>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>; + }; + + dsi0: dsi@14010000 { + compatible = "mediatek,mt8183-dsi"; + reg = <0 0x14010000 0 0x1000>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&mmsys CLK_MM_DSI0>, + <&mmsys CLK_MM_DSI_DSI0>, + <&mipi_tx0>; + clock-names = "engine", "digital", "hs"; + phys = <&mipi_tx0>; + phy-names = "dphy"; + power-domains = <&spm MT8192_POWER_DOMAIN_DISP>; + resets = <&mmsys MT8192_MMSYS_SW0_RST_B_DISP_DSI0>; + status = "disabled"; + + port { + dsi_out: endpoint { }; + }; + }; + + ovl_2l2: ovl@14014000 { + compatible = "mediatek,mt8192-disp-ovl-2l"; + reg = <0 0x14014000 0 0x1000>; + interrupts = <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH 0>; + power-domains = <&spm MT8192_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_DISP_OVL2_2L>; + iommus = <&iommu0 M4U_PORT_L1_OVL_2L_RDMA2>, + <&iommu0 M4U_PORT_L1_OVL_2L_RDMA2_HDR>; + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x4000 0x1000>; + }; + + rdma4: rdma@14015000 { + compatible = "mediatek,mt8192-disp-rdma", + "mediatek,mt8183-disp-rdma"; + reg = <0 0x14015000 0 0x1000>; + interrupts = <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH 0>; + power-domains = <&spm MT8192_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_DISP_RDMA4>; + iommus = <&iommu0 M4U_PORT_L1_DISP_RDMA4>; + mediatek,rdma-fifo-size = <2048>; + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x5000 0x1000>; + }; + dpi0: dpi@14016000 { compatible = "mediatek,mt8192-dpi"; reg = <0 0x14016000 0 0x1000>; diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi index fcc600674339..9b62e161db26 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi @@ -4,6 +4,7 @@ */ #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/spmi/spmi.h> #include "mt8195.dtsi" #include "mt6359.dtsi" @@ -17,6 +18,7 @@ i2c5 = &i2c5; i2c7 = &i2c7; mmc0 = &mmc0; + mmc1 = &mmc1; serial0 = &uart0; }; @@ -104,6 +106,18 @@ enable-active-high; regulator-always-on; }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + scp_mem: memory@50000000 { + compatible = "shared-dma-pool"; + reg = <0 0x50000000 0 0x2900000>; + no-map; + }; + }; }; &i2c0 { @@ -121,6 +135,16 @@ i2c-scl-internal-delay-ns = <12500>; pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; + + trackpad@15 { + compatible = "elan,ekth3000"; + reg = <0x15>; + interrupts-extended = <&pio 6 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_pins>; + vcc-supply = <&pp3300_s3>; + wakeup-source; + }; }; &i2c2 { @@ -137,6 +161,14 @@ clock-frequency = <400000>; pinctrl-names = "default"; pinctrl-0 = <&i2c3_pins>; + + tpm@50 { + compatible = "google,cr50"; + reg = <0x50>; + interrupts-extended = <&pio 88 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&cr50_int>; + }; }; &i2c4 { @@ -207,6 +239,24 @@ vqmmc-supply = <&mt6359_vufs_ldo_reg>; }; +&mmc1 { + status = "okay"; + + bus-width = <4>; + cap-sd-highspeed; + cd-gpios = <&pio 54 GPIO_ACTIVE_LOW>; + max-frequency = <200000000>; + no-mmc; + no-sdio; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc1_pins_default>, <&mmc1_pins_detect>; + pinctrl-1 = <&mmc1_pins_default>; + sd-uhs-sdr50; + sd-uhs-sdr104; + vmmc-supply = <&mt_pmic_vmch_ldo_reg>; + vqmmc-supply = <&mt_pmic_vmc_ldo_reg>; +}; + /* for CPU-L */ &mt6359_vcore_buck_reg { regulator-always-on; @@ -414,6 +464,21 @@ "AP_SPI_FLASH_MOSI", "AP_SPI_FLASH_MISO"; + cr50_int: cr50-irq-default-pins { + pins-gsc-ap-int-odl { + pinmux = <PINMUX_GPIO88__FUNC_GPIO88>; + input-enable; + }; + }; + + cros_ec_int: cros-ec-irq-default-pins { + pins-ec-ap-int-odl { + pinmux = <PINMUX_GPIO4__FUNC_GPIO4>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + input-enable; + }; + }; + i2c0_pins: i2c0-default-pins { pins-bus { pinmux = <PINMUX_GPIO8__FUNC_SDA0>, @@ -540,6 +605,32 @@ }; }; + mmc1_pins_detect: mmc1-detect-pins { + pins-insert { + pinmux = <PINMUX_GPIO54__FUNC_GPIO54>; + bias-pull-up; + }; + }; + + mmc1_pins_default: mmc1-default-pins { + pins-cmd-dat { + pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>, + <PINMUX_GPIO112__FUNC_MSDC1_DAT0>, + <PINMUX_GPIO113__FUNC_MSDC1_DAT1>, + <PINMUX_GPIO114__FUNC_MSDC1_DAT2>, + <PINMUX_GPIO115__FUNC_MSDC1_DAT3>; + input-enable; + drive-strength = <8>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins-clk { + pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>; + drive-strength = <8>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + }; + nor_pins_default: nor-default-pins { pins-ck-io { pinmux = <PINMUX_GPIO142__FUNC_SPINOR_IO0>, @@ -600,6 +691,14 @@ }; }; + scp_pins: scp-default-pins { + pins-vreq { + pinmux = <PINMUX_GPIO76__FUNC_SCP_VREQ_VAO>; + bias-disable; + input-enable; + }; + }; + spi0_pins: spi0-default-pins { pins-cs-mosi-clk { pinmux = <PINMUX_GPIO132__FUNC_SPIM0_CSB>, @@ -622,6 +721,14 @@ }; }; + trackpad_pins: trackpad-default-pins { + pins-int-n { + pinmux = <PINMUX_GPIO6__FUNC_GPIO6>; + input-enable; + bias-pull-up; + }; + }; + touchscreen_pins: touchscreen-default-pins { pins-int-n { pinmux = <PINMUX_GPIO92__FUNC_GPIO92>; @@ -643,12 +750,128 @@ interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>; }; +&scp { + status = "okay"; + + firmware-name = "mediatek/mt8195/scp.img"; + memory-region = <&scp_mem>; + pinctrl-names = "default"; + pinctrl-0 = <&scp_pins>; + + cros-ec-rpmsg { + compatible = "google,cros-ec-rpmsg"; + mediatek,rpmsg-name = "cros-ec-rpmsg"; + }; +}; + &spi0 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&spi0_pins>; mediatek,pad-select = <0>; + + cros_ec: ec@0 { + #address-cells = <1>; + #size-cells = <0>; + + compatible = "google,cros-ec-spi"; + reg = <0>; + interrupts-extended = <&pio 4 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&cros_ec_int>; + spi-max-frequency = <3000000>; + + keyboard-backlight { + compatible = "google,cros-kbd-led-backlight"; + }; + + i2c_tunnel: i2c-tunnel { + compatible = "google,cros-ec-i2c-tunnel"; + google,remote-bus = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mt_pmic_vmc_ldo_reg: regulator@0 { + compatible = "google,cros-ec-regulator"; + reg = <0>; + regulator-name = "mt_pmic_vmc_ldo"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + }; + + mt_pmic_vmch_ldo_reg: regulator@1 { + compatible = "google,cros-ec-regulator"; + reg = <1>; + regulator-name = "mt_pmic_vmch_ldo"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3600000>; + }; + + typec { + compatible = "google,cros-ec-typec"; + #address-cells = <1>; + #size-cells = <0>; + + usb_c0: connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "host"; + try-power-role = "source"; + }; + + usb_c1: connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + power-role = "dual"; + data-role = "host"; + try-power-role = "source"; + }; + }; + }; +}; + +&spmi { + #address-cells = <2>; + #size-cells = <0>; + + mt6315@6 { + compatible = "mediatek,mt6315-regulator"; + reg = <0x6 SPMI_USID>; + + regulators { + mt6315_6_vbuck1: vbuck1 { + regulator-compatible = "vbuck1"; + regulator-name = "Vbcpu"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1193750>; + regulator-enable-ramp-delay = <256>; + regulator-ramp-delay = <6250>; + regulator-allowed-modes = <0 1 2>; + regulator-always-on; + }; + }; + }; + + mt6315@7 { + compatible = "mediatek,mt6315-regulator"; + reg = <0x7 SPMI_USID>; + + regulators { + mt6315_7_vbuck1: vbuck1 { + regulator-compatible = "vbuck1"; + regulator-name = "Vgpu"; + regulator-min-microvolt = <625000>; + regulator-max-microvolt = <1193750>; + regulator-enable-ramp-delay = <256>; + regulator-ramp-delay = <6250>; + regulator-allowed-modes = <0 1 2>; + regulator-always-on; + }; + }; + }; }; &u3phy0 { @@ -700,3 +923,36 @@ vusb33-supply = <&mt6359_vusb_ldo_reg>; vbus-supply = <&usb_vbus>; }; + +#include <arm/cros-ec-keyboard.dtsi> +#include <arm/cros-ec-sbs.dtsi> + +&keyboard_controller { + function-row-physmap = < + MATRIX_KEY(0x00, 0x02, 0) /* T1 */ + MATRIX_KEY(0x03, 0x02, 0) /* T2 */ + MATRIX_KEY(0x02, 0x02, 0) /* T3 */ + MATRIX_KEY(0x01, 0x02, 0) /* T4 */ + MATRIX_KEY(0x03, 0x04, 0) /* T5 */ + MATRIX_KEY(0x02, 0x04, 0) /* T6 */ + MATRIX_KEY(0x01, 0x04, 0) /* T7 */ + MATRIX_KEY(0x02, 0x09, 0) /* T8 */ + MATRIX_KEY(0x01, 0x09, 0) /* T9 */ + MATRIX_KEY(0x00, 0x04, 0) /* T10 */ + >; + + linux,keymap = < + MATRIX_KEY(0x00, 0x02, KEY_BACK) + MATRIX_KEY(0x03, 0x02, KEY_REFRESH) + MATRIX_KEY(0x02, 0x02, KEY_ZOOM) + MATRIX_KEY(0x01, 0x02, KEY_SCALE) + MATRIX_KEY(0x03, 0x04, KEY_SYSRQ) + MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN) + MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP) + MATRIX_KEY(0x02, 0x09, KEY_MUTE) + MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN) + MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP) + + CROS_STD_MAIN_KEYMAP + >; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi index 066c14989708..905d1a90b406 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi @@ -6,10 +6,13 @@ /dts-v1/; #include <dt-bindings/clock/mt8195-clk.h> +#include <dt-bindings/gce/mt8195-gce.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/memory/mt8195-memory-port.h> #include <dt-bindings/phy/phy.h> #include <dt-bindings/pinctrl/mt8195-pinfunc.h> +#include <dt-bindings/power/mt8195-power.h> / { compatible = "mediatek,mt8195"; @@ -17,6 +20,11 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + gce0 = &gce0; + gce1 = &gce1; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -26,6 +34,7 @@ compatible = "arm,cortex-a55"; reg = <0x000>; enable-method = "psci"; + performance-domains = <&performance 0>; clock-frequency = <1701000000>; capacity-dmips-mhz = <578>; cpu-idle-states = <&cpu_off_l &cluster_off_l>; @@ -38,6 +47,7 @@ compatible = "arm,cortex-a55"; reg = <0x100>; enable-method = "psci"; + performance-domains = <&performance 0>; clock-frequency = <1701000000>; capacity-dmips-mhz = <578>; cpu-idle-states = <&cpu_off_l &cluster_off_l>; @@ -50,6 +60,7 @@ compatible = "arm,cortex-a55"; reg = <0x200>; enable-method = "psci"; + performance-domains = <&performance 0>; clock-frequency = <1701000000>; capacity-dmips-mhz = <578>; cpu-idle-states = <&cpu_off_l &cluster_off_l>; @@ -62,6 +73,7 @@ compatible = "arm,cortex-a55"; reg = <0x300>; enable-method = "psci"; + performance-domains = <&performance 0>; clock-frequency = <1701000000>; capacity-dmips-mhz = <578>; cpu-idle-states = <&cpu_off_l &cluster_off_l>; @@ -74,6 +86,7 @@ compatible = "arm,cortex-a78"; reg = <0x400>; enable-method = "psci"; + performance-domains = <&performance 1>; clock-frequency = <2171000000>; capacity-dmips-mhz = <1024>; cpu-idle-states = <&cpu_off_b &cluster_off_b>; @@ -86,6 +99,7 @@ compatible = "arm,cortex-a78"; reg = <0x500>; enable-method = "psci"; + performance-domains = <&performance 1>; clock-frequency = <2171000000>; capacity-dmips-mhz = <1024>; cpu-idle-states = <&cpu_off_b &cluster_off_b>; @@ -98,6 +112,7 @@ compatible = "arm,cortex-a78"; reg = <0x600>; enable-method = "psci"; + performance-domains = <&performance 1>; clock-frequency = <2171000000>; capacity-dmips-mhz = <1024>; cpu-idle-states = <&cpu_off_b &cluster_off_b>; @@ -110,6 +125,7 @@ compatible = "arm,cortex-a78"; reg = <0x700>; enable-method = "psci"; + performance-domains = <&performance 1>; clock-frequency = <2171000000>; capacity-dmips-mhz = <1024>; cpu-idle-states = <&cpu_off_b &cluster_off_b>; @@ -217,6 +233,17 @@ <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>; }; + dmic_codec: dmic-codec { + compatible = "dmic-codec"; + num-channels = <2>; + wakeup-delay-ms = <50>; + }; + + sound: mt8195-sound { + mediatek,platform = <&afe>; + status = "disabled"; + }; + clk26m: oscillator-26m { compatible = "fixed-clock"; #clock-cells = <0>; @@ -231,6 +258,12 @@ clock-output-names = "clk32k"; }; + performance: performance-controller@11bc10 { + compatible = "mediatek,cpufreq-hw"; + reg = <0 0x0011bc10 0 0x120>, <0 0x0011bd30 0 0x120>; + #performance-domain-cells = <1>; + }; + pmu-a55 { compatible = "arm,cortex-a55-pmu"; interrupt-parent = <&gic>; @@ -324,10 +357,337 @@ #interrupt-cells = <2>; }; + scpsys: syscon@10006000 { + compatible = "mediatek,mt8195-scpsys", "syscon", "simple-mfd"; + reg = <0 0x10006000 0 0x1000>; + + /* System Power Manager */ + spm: power-controller { + compatible = "mediatek,mt8195-power-controller"; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + /* power domain of the SoC */ + mfg0: power-domain@MT8195_POWER_DOMAIN_MFG0 { + reg = <MT8195_POWER_DOMAIN_MFG0>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + power-domain@MT8195_POWER_DOMAIN_MFG1 { + reg = <MT8195_POWER_DOMAIN_MFG1>; + clocks = <&apmixedsys CLK_APMIXED_MFGPLL>; + clock-names = "mfg"; + mediatek,infracfg = <&infracfg_ao>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + power-domain@MT8195_POWER_DOMAIN_MFG2 { + reg = <MT8195_POWER_DOMAIN_MFG2>; + #power-domain-cells = <0>; + }; + + power-domain@MT8195_POWER_DOMAIN_MFG3 { + reg = <MT8195_POWER_DOMAIN_MFG3>; + #power-domain-cells = <0>; + }; + + power-domain@MT8195_POWER_DOMAIN_MFG4 { + reg = <MT8195_POWER_DOMAIN_MFG4>; + #power-domain-cells = <0>; + }; + + power-domain@MT8195_POWER_DOMAIN_MFG5 { + reg = <MT8195_POWER_DOMAIN_MFG5>; + #power-domain-cells = <0>; + }; + + power-domain@MT8195_POWER_DOMAIN_MFG6 { + reg = <MT8195_POWER_DOMAIN_MFG6>; + #power-domain-cells = <0>; + }; + }; + }; + + power-domain@MT8195_POWER_DOMAIN_VPPSYS0 { + reg = <MT8195_POWER_DOMAIN_VPPSYS0>; + clocks = <&topckgen CLK_TOP_VPP>, + <&topckgen CLK_TOP_CAM>, + <&topckgen CLK_TOP_CCU>, + <&topckgen CLK_TOP_IMG>, + <&topckgen CLK_TOP_VENC>, + <&topckgen CLK_TOP_VDEC>, + <&topckgen CLK_TOP_WPE_VPP>, + <&topckgen CLK_TOP_CFG_VPP0>, + <&vppsys0 CLK_VPP0_SMI_COMMON>, + <&vppsys0 CLK_VPP0_GALS_VDO0_LARB0>, + <&vppsys0 CLK_VPP0_GALS_VDO0_LARB1>, + <&vppsys0 CLK_VPP0_GALS_VENCSYS>, + <&vppsys0 CLK_VPP0_GALS_VENCSYS_CORE1>, + <&vppsys0 CLK_VPP0_GALS_INFRA>, + <&vppsys0 CLK_VPP0_GALS_CAMSYS>, + <&vppsys0 CLK_VPP0_GALS_VPP1_LARB5>, + <&vppsys0 CLK_VPP0_GALS_VPP1_LARB6>, + <&vppsys0 CLK_VPP0_SMI_REORDER>, + <&vppsys0 CLK_VPP0_SMI_IOMMU>, + <&vppsys0 CLK_VPP0_GALS_IMGSYS_CAMSYS>, + <&vppsys0 CLK_VPP0_GALS_EMI0_EMI1>, + <&vppsys0 CLK_VPP0_SMI_SUB_COMMON_REORDER>, + <&vppsys0 CLK_VPP0_SMI_RSI>, + <&vppsys0 CLK_VPP0_SMI_COMMON_LARB4>, + <&vppsys0 CLK_VPP0_GALS_VDEC_VDEC_CORE1>, + <&vppsys0 CLK_VPP0_GALS_VPP1_WPE>, + <&vppsys0 CLK_VPP0_GALS_VDO0_VDO1_VENCSYS_CORE1>; + clock-names = "vppsys", "vppsys1", "vppsys2", "vppsys3", + "vppsys4", "vppsys5", "vppsys6", "vppsys7", + "vppsys0-0", "vppsys0-1", "vppsys0-2", "vppsys0-3", + "vppsys0-4", "vppsys0-5", "vppsys0-6", "vppsys0-7", + "vppsys0-8", "vppsys0-9", "vppsys0-10", "vppsys0-11", + "vppsys0-12", "vppsys0-13", "vppsys0-14", + "vppsys0-15", "vppsys0-16", "vppsys0-17", + "vppsys0-18"; + mediatek,infracfg = <&infracfg_ao>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + power-domain@MT8195_POWER_DOMAIN_VDEC1 { + reg = <MT8195_POWER_DOMAIN_VDEC1>; + clocks = <&vdecsys CLK_VDEC_LARB1>; + clock-names = "vdec1-0"; + mediatek,infracfg = <&infracfg_ao>; + #power-domain-cells = <0>; + }; + + power-domain@MT8195_POWER_DOMAIN_VENC_CORE1 { + reg = <MT8195_POWER_DOMAIN_VENC_CORE1>; + mediatek,infracfg = <&infracfg_ao>; + #power-domain-cells = <0>; + }; + + power-domain@MT8195_POWER_DOMAIN_VDOSYS0 { + reg = <MT8195_POWER_DOMAIN_VDOSYS0>; + clocks = <&topckgen CLK_TOP_CFG_VDO0>, + <&vdosys0 CLK_VDO0_SMI_GALS>, + <&vdosys0 CLK_VDO0_SMI_COMMON>, + <&vdosys0 CLK_VDO0_SMI_EMI>, + <&vdosys0 CLK_VDO0_SMI_IOMMU>, + <&vdosys0 CLK_VDO0_SMI_LARB>, + <&vdosys0 CLK_VDO0_SMI_RSI>; + clock-names = "vdosys0", "vdosys0-0", "vdosys0-1", + "vdosys0-2", "vdosys0-3", + "vdosys0-4", "vdosys0-5"; + mediatek,infracfg = <&infracfg_ao>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + power-domain@MT8195_POWER_DOMAIN_VPPSYS1 { + reg = <MT8195_POWER_DOMAIN_VPPSYS1>; + clocks = <&topckgen CLK_TOP_CFG_VPP1>, + <&vppsys1 CLK_VPP1_VPPSYS1_GALS>, + <&vppsys1 CLK_VPP1_VPPSYS1_LARB>; + clock-names = "vppsys1", "vppsys1-0", + "vppsys1-1"; + mediatek,infracfg = <&infracfg_ao>; + #power-domain-cells = <0>; + }; + + power-domain@MT8195_POWER_DOMAIN_WPESYS { + reg = <MT8195_POWER_DOMAIN_WPESYS>; + clocks = <&wpesys CLK_WPE_SMI_LARB7>, + <&wpesys CLK_WPE_SMI_LARB8>, + <&wpesys CLK_WPE_SMI_LARB7_P>, + <&wpesys CLK_WPE_SMI_LARB8_P>; + clock-names = "wepsys-0", "wepsys-1", "wepsys-2", + "wepsys-3"; + mediatek,infracfg = <&infracfg_ao>; + #power-domain-cells = <0>; + }; + + power-domain@MT8195_POWER_DOMAIN_VDEC0 { + reg = <MT8195_POWER_DOMAIN_VDEC0>; + clocks = <&vdecsys_soc CLK_VDEC_SOC_LARB1>; + clock-names = "vdec0-0"; + mediatek,infracfg = <&infracfg_ao>; + #power-domain-cells = <0>; + }; + + power-domain@MT8195_POWER_DOMAIN_VDEC2 { + reg = <MT8195_POWER_DOMAIN_VDEC2>; + clocks = <&vdecsys_core1 CLK_VDEC_CORE1_LARB1>; + clock-names = "vdec2-0"; + mediatek,infracfg = <&infracfg_ao>; + #power-domain-cells = <0>; + }; + + power-domain@MT8195_POWER_DOMAIN_VENC { + reg = <MT8195_POWER_DOMAIN_VENC>; + mediatek,infracfg = <&infracfg_ao>; + #power-domain-cells = <0>; + }; + + power-domain@MT8195_POWER_DOMAIN_VDOSYS1 { + reg = <MT8195_POWER_DOMAIN_VDOSYS1>; + clocks = <&topckgen CLK_TOP_CFG_VDO1>, + <&vdosys1 CLK_VDO1_SMI_LARB2>, + <&vdosys1 CLK_VDO1_SMI_LARB3>, + <&vdosys1 CLK_VDO1_GALS>; + clock-names = "vdosys1", "vdosys1-0", + "vdosys1-1", "vdosys1-2"; + mediatek,infracfg = <&infracfg_ao>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + power-domain@MT8195_POWER_DOMAIN_DP_TX { + reg = <MT8195_POWER_DOMAIN_DP_TX>; + mediatek,infracfg = <&infracfg_ao>; + #power-domain-cells = <0>; + }; + + power-domain@MT8195_POWER_DOMAIN_EPD_TX { + reg = <MT8195_POWER_DOMAIN_EPD_TX>; + mediatek,infracfg = <&infracfg_ao>; + #power-domain-cells = <0>; + }; + + power-domain@MT8195_POWER_DOMAIN_HDMI_TX { + reg = <MT8195_POWER_DOMAIN_HDMI_TX>; + clocks = <&topckgen CLK_TOP_HDMI_APB>; + clock-names = "hdmi_tx"; + #power-domain-cells = <0>; + }; + }; + + power-domain@MT8195_POWER_DOMAIN_IMG { + reg = <MT8195_POWER_DOMAIN_IMG>; + clocks = <&imgsys CLK_IMG_LARB9>, + <&imgsys CLK_IMG_GALS>; + clock-names = "img-0", "img-1"; + mediatek,infracfg = <&infracfg_ao>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + power-domain@MT8195_POWER_DOMAIN_DIP { + reg = <MT8195_POWER_DOMAIN_DIP>; + #power-domain-cells = <0>; + }; + + power-domain@MT8195_POWER_DOMAIN_IPE { + reg = <MT8195_POWER_DOMAIN_IPE>; + clocks = <&topckgen CLK_TOP_IPE>, + <&imgsys CLK_IMG_IPE>, + <&ipesys CLK_IPE_SMI_LARB12>; + clock-names = "ipe", "ipe-0", "ipe-1"; + mediatek,infracfg = <&infracfg_ao>; + #power-domain-cells = <0>; + }; + }; + + power-domain@MT8195_POWER_DOMAIN_CAM { + reg = <MT8195_POWER_DOMAIN_CAM>; + clocks = <&camsys CLK_CAM_LARB13>, + <&camsys CLK_CAM_LARB14>, + <&camsys CLK_CAM_CAM2MM0_GALS>, + <&camsys CLK_CAM_CAM2MM1_GALS>, + <&camsys CLK_CAM_CAM2SYS_GALS>; + clock-names = "cam-0", "cam-1", "cam-2", "cam-3", + "cam-4"; + mediatek,infracfg = <&infracfg_ao>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + power-domain@MT8195_POWER_DOMAIN_CAM_RAWA { + reg = <MT8195_POWER_DOMAIN_CAM_RAWA>; + #power-domain-cells = <0>; + }; + + power-domain@MT8195_POWER_DOMAIN_CAM_RAWB { + reg = <MT8195_POWER_DOMAIN_CAM_RAWB>; + #power-domain-cells = <0>; + }; + + power-domain@MT8195_POWER_DOMAIN_CAM_MRAW { + reg = <MT8195_POWER_DOMAIN_CAM_MRAW>; + #power-domain-cells = <0>; + }; + }; + }; + }; + + power-domain@MT8195_POWER_DOMAIN_PCIE_MAC_P0 { + reg = <MT8195_POWER_DOMAIN_PCIE_MAC_P0>; + mediatek,infracfg = <&infracfg_ao>; + #power-domain-cells = <0>; + }; + + power-domain@MT8195_POWER_DOMAIN_PCIE_MAC_P1 { + reg = <MT8195_POWER_DOMAIN_PCIE_MAC_P1>; + mediatek,infracfg = <&infracfg_ao>; + #power-domain-cells = <0>; + }; + + power-domain@MT8195_POWER_DOMAIN_PCIE_PHY { + reg = <MT8195_POWER_DOMAIN_PCIE_PHY>; + #power-domain-cells = <0>; + }; + + power-domain@MT8195_POWER_DOMAIN_SSUSB_PCIE_PHY { + reg = <MT8195_POWER_DOMAIN_SSUSB_PCIE_PHY>; + #power-domain-cells = <0>; + }; + + power-domain@MT8195_POWER_DOMAIN_CSI_RX_TOP { + reg = <MT8195_POWER_DOMAIN_CSI_RX_TOP>; + clocks = <&topckgen CLK_TOP_SENINF>, + <&topckgen CLK_TOP_SENINF2>; + clock-names = "csi_rx_top", "csi_rx_top1"; + #power-domain-cells = <0>; + }; + + power-domain@MT8195_POWER_DOMAIN_ETHER { + reg = <MT8195_POWER_DOMAIN_ETHER>; + clocks = <&pericfg_ao CLK_PERI_AO_ETHERNET_MAC>; + clock-names = "ether"; + #power-domain-cells = <0>; + }; + + power-domain@MT8195_POWER_DOMAIN_ADSP { + reg = <MT8195_POWER_DOMAIN_ADSP>; + clocks = <&topckgen CLK_TOP_ADSP>, + <&topckgen CLK_TOP_AUDIO_LOCAL_BUS>; + clock-names = "adsp", "adsp1"; + #address-cells = <1>; + #size-cells = <0>; + mediatek,infracfg = <&infracfg_ao>; + #power-domain-cells = <1>; + + power-domain@MT8195_POWER_DOMAIN_AUDIO { + reg = <MT8195_POWER_DOMAIN_AUDIO>; + clocks = <&topckgen CLK_TOP_A1SYS_HP>, + <&topckgen CLK_TOP_AUD_INTBUS>, + <&topckgen CLK_TOP_AUDIO_LOCAL_BUS>, + <&infracfg_ao CLK_INFRA_AO_AUDIO_26M_B>; + clock-names = "audio", "audio1", "audio2", + "audio3"; + mediatek,infracfg = <&infracfg_ao>; + #power-domain-cells = <0>; + }; + }; + }; + }; + watchdog: watchdog@10007000 { compatible = "mediatek,mt8195-wdt", "mediatek,mt6589-wdt"; + mediatek,disable-extrst; reg = <0 0x10007000 0 0x100>; + #reset-cells = <1>; }; apmixedsys: syscon@1000c000 { @@ -356,12 +716,150 @@ assigned-clock-parents = <&topckgen CLK_TOP_ULPOSC1_D10>; }; + spmi: spmi@10027000 { + compatible = "mediatek,mt8195-spmi"; + reg = <0 0x10027000 0 0x000e00>, + <0 0x10029000 0 0x000100>; + reg-names = "pmif", "spmimst"; + clocks = <&infracfg_ao CLK_INFRA_AO_PMIC_AP>, + <&infracfg_ao CLK_INFRA_AO_PMIC_TMR>, + <&topckgen CLK_TOP_SPMI_M_MST>; + clock-names = "pmif_sys_ck", + "pmif_tmr_ck", + "spmimst_clk_mux"; + assigned-clocks = <&topckgen CLK_TOP_PWRAP_ULPOSC>; + assigned-clock-parents = <&topckgen CLK_TOP_ULPOSC1_D10>; + }; + + iommu_infra: infra-iommu@10315000 { + compatible = "mediatek,mt8195-iommu-infra"; + reg = <0 0x10315000 0 0x5000>; + interrupts = <GIC_SPI 795 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 796 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 797 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 798 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 799 IRQ_TYPE_LEVEL_HIGH 0>; + #iommu-cells = <1>; + }; + + gce0: mailbox@10320000 { + compatible = "mediatek,mt8195-gce"; + reg = <0 0x10320000 0 0x4000>; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH 0>; + #mbox-cells = <2>; + clocks = <&infracfg_ao CLK_INFRA_AO_GCE>; + }; + + gce1: mailbox@10330000 { + compatible = "mediatek,mt8195-gce"; + reg = <0 0x10330000 0 0x4000>; + interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH 0>; + #mbox-cells = <2>; + clocks = <&infracfg_ao CLK_INFRA_AO_GCE2>; + }; + + scp: scp@10500000 { + compatible = "mediatek,mt8195-scp"; + reg = <0 0x10500000 0 0x100000>, + <0 0x10720000 0 0xe0000>, + <0 0x10700000 0 0x8000>; + reg-names = "sram", "cfg", "l1tcm"; + interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH 0>; + status = "disabled"; + }; + scp_adsp: clock-controller@10720000 { compatible = "mediatek,mt8195-scp_adsp"; reg = <0 0x10720000 0 0x1000>; #clock-cells = <1>; }; + adsp: dsp@10803000 { + compatible = "mediatek,mt8195-dsp"; + reg = <0 0x10803000 0 0x1000>, + <0 0x10840000 0 0x40000>; + reg-names = "cfg", "sram"; + clocks = <&topckgen CLK_TOP_ADSP>, + <&clk26m>, + <&topckgen CLK_TOP_AUDIO_LOCAL_BUS>, + <&topckgen CLK_TOP_MAINPLL_D7_D2>, + <&scp_adsp CLK_SCP_ADSP_AUDIODSP>, + <&topckgen CLK_TOP_AUDIO_H>; + clock-names = "adsp_sel", + "clk26m_ck", + "audio_local_bus", + "mainpll_d7_d2", + "scp_adsp_audiodsp", + "audio_h"; + power-domains = <&spm MT8195_POWER_DOMAIN_ADSP>; + mbox-names = "rx", "tx"; + mboxes = <&adsp_mailbox0>, <&adsp_mailbox1>; + status = "disabled"; + }; + + adsp_mailbox0: mailbox@10816000 { + compatible = "mediatek,mt8195-adsp-mbox"; + #mbox-cells = <0>; + reg = <0 0x10816000 0 0x1000>; + interrupts = <GIC_SPI 702 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + adsp_mailbox1: mailbox@10817000 { + compatible = "mediatek,mt8195-adsp-mbox"; + #mbox-cells = <0>; + reg = <0 0x10817000 0 0x1000>; + interrupts = <GIC_SPI 703 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + afe: mt8195-afe-pcm@10890000 { + compatible = "mediatek,mt8195-audio"; + reg = <0 0x10890000 0 0x10000>; + mediatek,topckgen = <&topckgen>; + power-domains = <&spm MT8195_POWER_DOMAIN_AUDIO>; + interrupts = <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH 0>; + resets = <&watchdog 14>; + reset-names = "audiosys"; + clocks = <&clk26m>, + <&apmixedsys CLK_APMIXED_APLL1>, + <&apmixedsys CLK_APMIXED_APLL2>, + <&topckgen CLK_TOP_APLL12_DIV0>, + <&topckgen CLK_TOP_APLL12_DIV1>, + <&topckgen CLK_TOP_APLL12_DIV2>, + <&topckgen CLK_TOP_APLL12_DIV3>, + <&topckgen CLK_TOP_APLL12_DIV9>, + <&topckgen CLK_TOP_A1SYS_HP>, + <&topckgen CLK_TOP_AUD_INTBUS>, + <&topckgen CLK_TOP_AUDIO_H>, + <&topckgen CLK_TOP_AUDIO_LOCAL_BUS>, + <&topckgen CLK_TOP_DPTX_MCK>, + <&topckgen CLK_TOP_I2SO1_MCK>, + <&topckgen CLK_TOP_I2SO2_MCK>, + <&topckgen CLK_TOP_I2SI1_MCK>, + <&topckgen CLK_TOP_I2SI2_MCK>, + <&infracfg_ao CLK_INFRA_AO_AUDIO_26M_B>, + <&scp_adsp CLK_SCP_ADSP_AUDIODSP>; + clock-names = "clk26m", + "apll1_ck", + "apll2_ck", + "apll12_div0", + "apll12_div1", + "apll12_div2", + "apll12_div3", + "apll12_div9", + "a1sys_hp_sel", + "aud_intbus_sel", + "audio_h_sel", + "audio_local_bus_sel", + "dptx_m_sel", + "i2so1_m_sel", + "i2so2_m_sel", + "i2si1_m_sel", + "i2si2_m_sel", + "infra_ao_audio_26m_b", + "scp_adsp_audiodsp"; + status = "disabled"; + }; + uart0: serial@11001100 { compatible = "mediatek,mt8195-uart", "mediatek,mt6577-uart"; @@ -560,8 +1058,10 @@ clocks = <&infracfg_ao CLK_INFRA_AO_SSUSB>, <&topckgen CLK_TOP_SSUSB_REF>, <&apmixedsys CLK_APMIXED_USB1PLL>, + <&clk26m>, <&infracfg_ao CLK_INFRA_AO_SSUSB_XHCI>; - clock-names = "sys_ck", "ref_ck", "mcu_ck", "xhci_ck"; + clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", + "xhci_ck"; mediatek,syscon-wakeup = <&pericfg 0x400 103>; wakeup-source; status = "disabled"; @@ -625,8 +1125,10 @@ clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_1P_BUS>, <&topckgen CLK_TOP_SSUSB_P1_REF>, <&apmixedsys CLK_APMIXED_USB1PLL>, + <&clk26m>, <&pericfg_ao CLK_PERI_AO_SSUSB_1P_XHCI>; - clock-names = "sys_ck", "ref_ck", "mcu_ck","xhci_ck"; + clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", + "xhci_ck"; mediatek,syscon-wakeup = <&pericfg 0x400 104>; wakeup-source; status = "disabled"; @@ -646,8 +1148,11 @@ <&topckgen CLK_TOP_UNIVPLL_D5_D4>; clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_2P_BUS>, <&topckgen CLK_TOP_SSUSB_P2_REF>, + <&clk26m>, + <&clk26m>, <&pericfg_ao CLK_PERI_AO_SSUSB_2P_XHCI>; - clock-names = "sys_ck", "ref_ck", "xhci_ck"; + clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", + "xhci_ck"; mediatek,syscon-wakeup = <&pericfg 0x400 105>; wakeup-source; status = "disabled"; @@ -667,8 +1172,11 @@ <&topckgen CLK_TOP_UNIVPLL_D5_D4>; clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_3P_BUS>, <&topckgen CLK_TOP_SSUSB_P3_REF>, + <&clk26m>, + <&clk26m>, <&pericfg_ao CLK_PERI_AO_SSUSB_3P_XHCI>; - clock-names = "sys_ck", "ref_ck", "xhci_ck"; + clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", + "xhci_ck"; mediatek,syscon-wakeup = <&pericfg 0x400 106>; wakeup-source; status = "disabled"; @@ -828,7 +1336,7 @@ clock-names = "main", "dma"; #address-cells = <1>; #size-cells = <0>; - status = "okay"; + status = "disabled"; }; i2c1: i2c@11e01000 { @@ -968,6 +1476,70 @@ #clock-cells = <1>; }; + vppsys0: clock-controller@14000000 { + compatible = "mediatek,mt8195-vppsys0"; + reg = <0 0x14000000 0 0x1000>; + #clock-cells = <1>; + }; + + smi_sub_common_vpp0_vpp1_2x1: smi@14010000 { + compatible = "mediatek,mt8195-smi-sub-common"; + reg = <0 0x14010000 0 0x1000>; + clocks = <&vppsys0 CLK_VPP0_GALS_VPP1_WPE>, + <&vppsys0 CLK_VPP0_GALS_VPP1_WPE>, + <&vppsys0 CLK_VPP0_GALS_VPP1_WPE>; + clock-names = "apb", "smi", "gals0"; + mediatek,smi = <&smi_common_vpp>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>; + }; + + smi_sub_common_vdec_vpp0_2x1: smi@14011000 { + compatible = "mediatek,mt8195-smi-sub-common"; + reg = <0 0x14011000 0 0x1000>; + clocks = <&vppsys0 CLK_VPP0_GALS_VDEC_VDEC_CORE1>, + <&vppsys0 CLK_VPP0_GALS_VDEC_VDEC_CORE1>, + <&vppsys0 CLK_VPP0_GALS_VDEC_VDEC_CORE1>; + clock-names = "apb", "smi", "gals0"; + mediatek,smi = <&smi_common_vpp>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>; + }; + + smi_common_vpp: smi@14012000 { + compatible = "mediatek,mt8195-smi-common-vpp"; + reg = <0 0x14012000 0 0x1000>; + clocks = <&vppsys0 CLK_VPP0_SMI_COMMON_LARB4>, + <&vppsys0 CLK_VPP0_SMI_COMMON_LARB4>, + <&vppsys0 CLK_VPP0_SMI_RSI>, + <&vppsys0 CLK_VPP0_SMI_RSI>; + clock-names = "apb", "smi", "gals0", "gals1"; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>; + }; + + larb4: larb@14013000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x14013000 0 0x1000>; + mediatek,larb-id = <4>; + mediatek,smi = <&smi_sub_common_vpp0_vpp1_2x1>; + clocks = <&vppsys0 CLK_VPP0_GALS_VPP1_WPE>, + <&vppsys0 CLK_VPP0_SMI_COMMON_LARB4>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>; + }; + + iommu_vpp: iommu@14018000 { + compatible = "mediatek,mt8195-iommu-vpp"; + reg = <0 0x14018000 0 0x1000>; + mediatek,larbs = <&larb1 &larb3 &larb4 &larb6 &larb8 + &larb12 &larb14 &larb16 &larb18 + &larb20 &larb22 &larb23 &larb26 + &larb27>; + interrupts = <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vppsys0 CLK_VPP0_SMI_IOMMU>; + clock-names = "bclk"; + #iommu-cells = <1>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>; + }; + wpesys: clock-controller@14e00000 { compatible = "mediatek,mt8195-wpesys"; reg = <0 0x14e00000 0 0x1000>; @@ -986,18 +1558,116 @@ #clock-cells = <1>; }; + larb7: larb@14e04000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x14e04000 0 0x1000>; + mediatek,larb-id = <7>; + mediatek,smi = <&smi_common_vdo>; + clocks = <&wpesys CLK_WPE_SMI_LARB7>, + <&wpesys CLK_WPE_SMI_LARB7>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8195_POWER_DOMAIN_WPESYS>; + }; + + larb8: larb@14e05000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x14e05000 0 0x1000>; + mediatek,larb-id = <8>; + mediatek,smi = <&smi_common_vpp>; + clocks = <&wpesys CLK_WPE_SMI_LARB8>, + <&wpesys CLK_WPE_SMI_LARB8>, + <&vppsys0 CLK_VPP0_GALS_VPP1_WPE>; + clock-names = "apb", "smi", "gals"; + power-domains = <&spm MT8195_POWER_DOMAIN_WPESYS>; + }; + + vppsys1: clock-controller@14f00000 { + compatible = "mediatek,mt8195-vppsys1"; + reg = <0 0x14f00000 0 0x1000>; + #clock-cells = <1>; + }; + + larb5: larb@14f02000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x14f02000 0 0x1000>; + mediatek,larb-id = <5>; + mediatek,smi = <&smi_common_vdo>; + clocks = <&vppsys1 CLK_VPP1_VPPSYS1_LARB>, + <&vppsys1 CLK_VPP1_VPPSYS1_GALS>, + <&vppsys0 CLK_VPP0_GALS_VPP1_LARB5>; + clock-names = "apb", "smi", "gals"; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>; + }; + + larb6: larb@14f03000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x14f03000 0 0x1000>; + mediatek,larb-id = <6>; + mediatek,smi = <&smi_sub_common_vpp0_vpp1_2x1>; + clocks = <&vppsys1 CLK_VPP1_VPPSYS1_LARB>, + <&vppsys1 CLK_VPP1_VPPSYS1_GALS>, + <&vppsys0 CLK_VPP0_GALS_VPP1_LARB6>; + clock-names = "apb", "smi", "gals"; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>; + }; + imgsys: clock-controller@15000000 { compatible = "mediatek,mt8195-imgsys"; reg = <0 0x15000000 0 0x1000>; #clock-cells = <1>; }; + larb9: larb@15001000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x15001000 0 0x1000>; + mediatek,larb-id = <9>; + mediatek,smi = <&smi_sub_common_img1_3x1>; + clocks = <&imgsys CLK_IMG_LARB9>, + <&imgsys CLK_IMG_LARB9>, + <&imgsys CLK_IMG_GALS>; + clock-names = "apb", "smi", "gals"; + power-domains = <&spm MT8195_POWER_DOMAIN_IMG>; + }; + + smi_sub_common_img0_3x1: smi@15002000 { + compatible = "mediatek,mt8195-smi-sub-common"; + reg = <0 0x15002000 0 0x1000>; + clocks = <&imgsys CLK_IMG_IPE>, + <&imgsys CLK_IMG_IPE>, + <&vppsys0 CLK_VPP0_GALS_IMGSYS_CAMSYS>; + clock-names = "apb", "smi", "gals0"; + mediatek,smi = <&smi_common_vpp>; + power-domains = <&spm MT8195_POWER_DOMAIN_IMG>; + }; + + smi_sub_common_img1_3x1: smi@15003000 { + compatible = "mediatek,mt8195-smi-sub-common"; + reg = <0 0x15003000 0 0x1000>; + clocks = <&imgsys CLK_IMG_LARB9>, + <&imgsys CLK_IMG_LARB9>, + <&imgsys CLK_IMG_GALS>; + clock-names = "apb", "smi", "gals0"; + mediatek,smi = <&smi_common_vdo>; + power-domains = <&spm MT8195_POWER_DOMAIN_IMG>; + }; + imgsys1_dip_top: clock-controller@15110000 { compatible = "mediatek,mt8195-imgsys1_dip_top"; reg = <0 0x15110000 0 0x1000>; #clock-cells = <1>; }; + larb10: larb@15120000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x15120000 0 0x1000>; + mediatek,larb-id = <10>; + mediatek,smi = <&smi_sub_common_img1_3x1>; + clocks = <&imgsys CLK_IMG_DIP0>, + <&imgsys1_dip_top CLK_IMG1_DIP_TOP_LARB10>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8195_POWER_DOMAIN_DIP>; + }; + imgsys1_dip_nr: clock-controller@15130000 { compatible = "mediatek,mt8195-imgsys1_dip_nr"; reg = <0 0x15130000 0 0x1000>; @@ -1010,18 +1680,129 @@ #clock-cells = <1>; }; + larb11: larb@15230000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x15230000 0 0x1000>; + mediatek,larb-id = <11>; + mediatek,smi = <&smi_sub_common_img1_3x1>; + clocks = <&imgsys CLK_IMG_WPE0>, + <&imgsys1_wpe CLK_IMG1_WPE_LARB11>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8195_POWER_DOMAIN_DIP>; + }; + ipesys: clock-controller@15330000 { compatible = "mediatek,mt8195-ipesys"; reg = <0 0x15330000 0 0x1000>; #clock-cells = <1>; }; + larb12: larb@15340000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x15340000 0 0x1000>; + mediatek,larb-id = <12>; + mediatek,smi = <&smi_sub_common_img0_3x1>; + clocks = <&ipesys CLK_IPE_SMI_LARB12>, + <&ipesys CLK_IPE_SMI_LARB12>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8195_POWER_DOMAIN_IPE>; + }; + camsys: clock-controller@16000000 { compatible = "mediatek,mt8195-camsys"; reg = <0 0x16000000 0 0x1000>; #clock-cells = <1>; }; + larb13: larb@16001000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x16001000 0 0x1000>; + mediatek,larb-id = <13>; + mediatek,smi = <&smi_sub_common_cam_4x1>; + clocks = <&camsys CLK_CAM_LARB13>, + <&camsys CLK_CAM_LARB13>, + <&camsys CLK_CAM_CAM2MM0_GALS>; + clock-names = "apb", "smi", "gals"; + power-domains = <&spm MT8195_POWER_DOMAIN_CAM>; + }; + + larb14: larb@16002000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x16002000 0 0x1000>; + mediatek,larb-id = <14>; + mediatek,smi = <&smi_sub_common_cam_7x1>; + clocks = <&camsys CLK_CAM_LARB14>, + <&camsys CLK_CAM_LARB14>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8195_POWER_DOMAIN_CAM>; + }; + + smi_sub_common_cam_4x1: smi@16004000 { + compatible = "mediatek,mt8195-smi-sub-common"; + reg = <0 0x16004000 0 0x1000>; + clocks = <&camsys CLK_CAM_LARB13>, + <&camsys CLK_CAM_LARB13>, + <&camsys CLK_CAM_CAM2MM0_GALS>; + clock-names = "apb", "smi", "gals0"; + mediatek,smi = <&smi_common_vdo>; + power-domains = <&spm MT8195_POWER_DOMAIN_CAM>; + }; + + smi_sub_common_cam_7x1: smi@16005000 { + compatible = "mediatek,mt8195-smi-sub-common"; + reg = <0 0x16005000 0 0x1000>; + clocks = <&camsys CLK_CAM_LARB14>, + <&camsys CLK_CAM_CAM2MM1_GALS>, + <&vppsys0 CLK_VPP0_GALS_IMGSYS_CAMSYS>; + clock-names = "apb", "smi", "gals0"; + mediatek,smi = <&smi_common_vpp>; + power-domains = <&spm MT8195_POWER_DOMAIN_CAM>; + }; + + larb16: larb@16012000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x16012000 0 0x1000>; + mediatek,larb-id = <16>; + mediatek,smi = <&smi_sub_common_cam_7x1>; + clocks = <&camsys_rawa CLK_CAM_RAWA_LARBX>, + <&camsys_rawa CLK_CAM_RAWA_LARBX>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8195_POWER_DOMAIN_CAM_RAWA>; + }; + + larb17: larb@16013000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x16013000 0 0x1000>; + mediatek,larb-id = <17>; + mediatek,smi = <&smi_sub_common_cam_4x1>; + clocks = <&camsys_yuva CLK_CAM_YUVA_LARBX>, + <&camsys_yuva CLK_CAM_YUVA_LARBX>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8195_POWER_DOMAIN_CAM_RAWA>; + }; + + larb27: larb@16014000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x16014000 0 0x1000>; + mediatek,larb-id = <27>; + mediatek,smi = <&smi_sub_common_cam_7x1>; + clocks = <&camsys_rawb CLK_CAM_RAWB_LARBX>, + <&camsys_rawb CLK_CAM_RAWB_LARBX>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8195_POWER_DOMAIN_CAM_RAWB>; + }; + + larb28: larb@16015000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x16015000 0 0x1000>; + mediatek,larb-id = <28>; + mediatek,smi = <&smi_sub_common_cam_4x1>; + clocks = <&camsys_yuvb CLK_CAM_YUVB_LARBX>, + <&camsys_yuvb CLK_CAM_YUVB_LARBX>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8195_POWER_DOMAIN_CAM_RAWB>; + }; + camsys_rawa: clock-controller@1604f000 { compatible = "mediatek,mt8195-camsys_rawa"; reg = <0 0x1604f000 0 0x1000>; @@ -1052,24 +1833,103 @@ #clock-cells = <1>; }; + larb25: larb@16141000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x16141000 0 0x1000>; + mediatek,larb-id = <25>; + mediatek,smi = <&smi_sub_common_cam_4x1>; + clocks = <&camsys CLK_CAM_LARB13>, + <&camsys_mraw CLK_CAM_MRAW_LARBX>, + <&camsys CLK_CAM_CAM2MM0_GALS>; + clock-names = "apb", "smi", "gals"; + power-domains = <&spm MT8195_POWER_DOMAIN_CAM_MRAW>; + }; + + larb26: larb@16142000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x16142000 0 0x1000>; + mediatek,larb-id = <26>; + mediatek,smi = <&smi_sub_common_cam_7x1>; + clocks = <&camsys_mraw CLK_CAM_MRAW_LARBX>, + <&camsys_mraw CLK_CAM_MRAW_LARBX>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8195_POWER_DOMAIN_CAM_MRAW>; + + }; + ccusys: clock-controller@17200000 { compatible = "mediatek,mt8195-ccusys"; reg = <0 0x17200000 0 0x1000>; #clock-cells = <1>; }; + larb18: larb@17201000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x17201000 0 0x1000>; + mediatek,larb-id = <18>; + mediatek,smi = <&smi_sub_common_cam_7x1>; + clocks = <&ccusys CLK_CCU_LARB18>, + <&ccusys CLK_CCU_LARB18>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8195_POWER_DOMAIN_CAM>; + }; + + larb24: larb@1800d000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x1800d000 0 0x1000>; + mediatek,larb-id = <24>; + mediatek,smi = <&smi_common_vdo>; + clocks = <&vdecsys_soc CLK_VDEC_SOC_LARB1>, + <&vdecsys_soc CLK_VDEC_SOC_LARB1>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8195_POWER_DOMAIN_VDEC0>; + }; + + larb23: larb@1800e000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x1800e000 0 0x1000>; + mediatek,larb-id = <23>; + mediatek,smi = <&smi_sub_common_vdec_vpp0_2x1>; + clocks = <&vppsys0 CLK_VPP0_GALS_VDEC_VDEC_CORE1>, + <&vdecsys_soc CLK_VDEC_SOC_LARB1>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8195_POWER_DOMAIN_VDEC0>; + }; + vdecsys_soc: clock-controller@1800f000 { compatible = "mediatek,mt8195-vdecsys_soc"; reg = <0 0x1800f000 0 0x1000>; #clock-cells = <1>; }; + larb21: larb@1802e000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x1802e000 0 0x1000>; + mediatek,larb-id = <21>; + mediatek,smi = <&smi_common_vdo>; + clocks = <&vdecsys CLK_VDEC_LARB1>, + <&vdecsys CLK_VDEC_LARB1>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8195_POWER_DOMAIN_VDEC1>; + }; + vdecsys: clock-controller@1802f000 { compatible = "mediatek,mt8195-vdecsys"; reg = <0 0x1802f000 0 0x1000>; #clock-cells = <1>; }; + larb22: larb@1803e000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x1803e000 0 0x1000>; + mediatek,larb-id = <22>; + mediatek,smi = <&smi_sub_common_vdec_vpp0_2x1>; + clocks = <&vppsys0 CLK_VPP0_GALS_VDEC_VDEC_CORE1>, + <&vdecsys_core1 CLK_VDEC_CORE1_LARB1>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8195_POWER_DOMAIN_VDEC2>; + }; + vdecsys_core1: clock-controller@1803f000 { compatible = "mediatek,mt8195-vdecsys_core1"; reg = <0 0x1803f000 0 0x1000>; @@ -1088,10 +1948,212 @@ #clock-cells = <1>; }; + larb19: larb@1a010000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x1a010000 0 0x1000>; + mediatek,larb-id = <19>; + mediatek,smi = <&smi_common_vdo>; + clocks = <&vencsys CLK_VENC_VENC>, + <&vencsys CLK_VENC_GALS>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8195_POWER_DOMAIN_VENC>; + }; + vencsys_core1: clock-controller@1b000000 { compatible = "mediatek,mt8195-vencsys_core1"; reg = <0 0x1b000000 0 0x1000>; #clock-cells = <1>; }; + + vdosys0: syscon@1c01a000 { + compatible = "mediatek,mt8195-mmsys", "syscon"; + reg = <0 0x1c01a000 0 0x1000>; + mboxes = <&gce0 0 CMDQ_THR_PRIO_4>; + #clock-cells = <1>; + }; + + larb20: larb@1b010000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x1b010000 0 0x1000>; + mediatek,larb-id = <20>; + mediatek,smi = <&smi_common_vpp>; + clocks = <&vencsys_core1 CLK_VENC_CORE1_LARB>, + <&vencsys_core1 CLK_VENC_CORE1_GALS>, + <&vppsys0 CLK_VPP0_GALS_VDO0_VDO1_VENCSYS_CORE1>; + clock-names = "apb", "smi", "gals"; + power-domains = <&spm MT8195_POWER_DOMAIN_VENC_CORE1>; + }; + + ovl0: ovl@1c000000 { + compatible = "mediatek,mt8195-disp-ovl", "mediatek,mt8183-disp-ovl"; + reg = <0 0x1c000000 0 0x1000>; + interrupts = <GIC_SPI 636 IRQ_TYPE_LEVEL_HIGH 0>; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>; + clocks = <&vdosys0 CLK_VDO0_DISP_OVL0>; + iommus = <&iommu_vdo M4U_PORT_L0_DISP_OVL0_RDMA0>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x0000 0x1000>; + }; + + rdma0: rdma@1c002000 { + compatible = "mediatek,mt8195-disp-rdma"; + reg = <0 0x1c002000 0 0x1000>; + interrupts = <GIC_SPI 638 IRQ_TYPE_LEVEL_HIGH 0>; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>; + clocks = <&vdosys0 CLK_VDO0_DISP_RDMA0>; + iommus = <&iommu_vdo M4U_PORT_L0_DISP_RDMA0>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x2000 0x1000>; + }; + + color0: color@1c003000 { + compatible = "mediatek,mt8195-disp-color", "mediatek,mt8173-disp-color"; + reg = <0 0x1c003000 0 0x1000>; + interrupts = <GIC_SPI 639 IRQ_TYPE_LEVEL_HIGH 0>; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>; + clocks = <&vdosys0 CLK_VDO0_DISP_COLOR0>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x3000 0x1000>; + }; + + ccorr0: ccorr@1c004000 { + compatible = "mediatek,mt8195-disp-ccorr", "mediatek,mt8192-disp-ccorr"; + reg = <0 0x1c004000 0 0x1000>; + interrupts = <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH 0>; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>; + clocks = <&vdosys0 CLK_VDO0_DISP_CCORR0>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x4000 0x1000>; + }; + + aal0: aal@1c005000 { + compatible = "mediatek,mt8195-disp-aal", "mediatek,mt8183-disp-aal"; + reg = <0 0x1c005000 0 0x1000>; + interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH 0>; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>; + clocks = <&vdosys0 CLK_VDO0_DISP_AAL0>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x5000 0x1000>; + }; + + gamma0: gamma@1c006000 { + compatible = "mediatek,mt8195-disp-gamma", "mediatek,mt8183-disp-gamma"; + reg = <0 0x1c006000 0 0x1000>; + interrupts = <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH 0>; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>; + clocks = <&vdosys0 CLK_VDO0_DISP_GAMMA0>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x6000 0x1000>; + }; + + dither0: dither@1c007000 { + compatible = "mediatek,mt8195-disp-dither", "mediatek,mt8183-disp-dither"; + reg = <0 0x1c007000 0 0x1000>; + interrupts = <GIC_SPI 643 IRQ_TYPE_LEVEL_HIGH 0>; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>; + clocks = <&vdosys0 CLK_VDO0_DISP_DITHER0>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x7000 0x1000>; + }; + + dsc0: dsc@1c009000 { + compatible = "mediatek,mt8195-disp-dsc"; + reg = <0 0x1c009000 0 0x1000>; + interrupts = <GIC_SPI 645 IRQ_TYPE_LEVEL_HIGH 0>; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>; + clocks = <&vdosys0 CLK_VDO0_DSC_WRAP0>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x9000 0x1000>; + }; + + merge0: merge@1c014000 { + compatible = "mediatek,mt8195-disp-merge"; + reg = <0 0x1c014000 0 0x1000>; + interrupts = <GIC_SPI 656 IRQ_TYPE_LEVEL_HIGH 0>; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>; + clocks = <&vdosys0 CLK_VDO0_VPP_MERGE0>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c01XXXX 0x4000 0x1000>; + }; + + mutex: mutex@1c016000 { + compatible = "mediatek,mt8195-disp-mutex"; + reg = <0 0x1c016000 0 0x1000>; + interrupts = <GIC_SPI 658 IRQ_TYPE_LEVEL_HIGH 0>; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>; + clocks = <&vdosys0 CLK_VDO0_DISP_MUTEX0>; + mediatek,gce-events = <CMDQ_EVENT_VDO0_DISP_STREAM_DONE_0>; + }; + + larb0: larb@1c018000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x1c018000 0 0x1000>; + mediatek,larb-id = <0>; + mediatek,smi = <&smi_common_vdo>; + clocks = <&vdosys0 CLK_VDO0_SMI_LARB>, + <&vdosys0 CLK_VDO0_SMI_LARB>, + <&vppsys0 CLK_VPP0_GALS_VDO0_LARB0>; + clock-names = "apb", "smi", "gals"; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>; + }; + + larb1: larb@1c019000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x1c019000 0 0x1000>; + mediatek,larb-id = <1>; + mediatek,smi = <&smi_common_vpp>; + clocks = <&vdosys0 CLK_VDO0_SMI_LARB>, + <&vppsys0 CLK_VPP0_GALS_VDO0_VDO1_VENCSYS_CORE1>, + <&vppsys0 CLK_VPP0_GALS_VDO0_LARB1>; + clock-names = "apb", "smi", "gals"; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>; + }; + + vdosys1: syscon@1c100000 { + compatible = "mediatek,mt8195-mmsys", "syscon"; + reg = <0 0x1c100000 0 0x1000>; + #clock-cells = <1>; + }; + + smi_common_vdo: smi@1c01b000 { + compatible = "mediatek,mt8195-smi-common-vdo"; + reg = <0 0x1c01b000 0 0x1000>; + clocks = <&vdosys0 CLK_VDO0_SMI_COMMON>, + <&vdosys0 CLK_VDO0_SMI_EMI>, + <&vdosys0 CLK_VDO0_SMI_RSI>, + <&vdosys0 CLK_VDO0_SMI_GALS>; + clock-names = "apb", "smi", "gals0", "gals1"; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>; + + }; + + iommu_vdo: iommu@1c01f000 { + compatible = "mediatek,mt8195-iommu-vdo"; + reg = <0 0x1c01f000 0 0x1000>; + mediatek,larbs = <&larb0 &larb2 &larb5 &larb7 &larb9 + &larb10 &larb11 &larb13 &larb17 + &larb19 &larb21 &larb24 &larb25 + &larb28>; + interrupts = <GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH 0>; + #iommu-cells = <1>; + clocks = <&vdosys0 CLK_VDO0_SMI_IOMMU>; + clock-names = "bclk"; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>; + }; + + larb2: larb@1c102000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x1c102000 0 0x1000>; + mediatek,larb-id = <2>; + mediatek,smi = <&smi_common_vdo>; + clocks = <&vdosys1 CLK_VDO1_SMI_LARB2>, + <&vdosys1 CLK_VDO1_SMI_LARB2>, + <&vdosys1 CLK_VDO1_GALS>; + clock-names = "apb", "smi", "gals"; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; + }; + + larb3: larb@1c103000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x1c103000 0 0x1000>; + mediatek,larb-id = <3>; + mediatek,smi = <&smi_common_vpp>; + clocks = <&vdosys1 CLK_VDO1_SMI_LARB3>, + <&vdosys1 CLK_VDO1_GALS>, + <&vppsys0 CLK_VPP0_GALS_VDO0_VDO1_VENCSYS_CORE1>; + clock-names = "apb", "smi", "gals"; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; + }; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index 59a10fb184f8..6602fe421ee8 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -672,6 +672,10 @@ clock-names = "div-clk"; resets = <&bpmp TEGRA186_RESET_I2C1>; reset-names = "i2c"; + iommus = <&smmu TEGRA186_SID_GPCDMA_0>; + dma-coherent; + dmas = <&gpcdma 21>, <&gpcdma 21>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -685,6 +689,10 @@ clock-names = "div-clk"; resets = <&bpmp TEGRA186_RESET_I2C3>; reset-names = "i2c"; + iommus = <&smmu TEGRA186_SID_GPCDMA_0>; + dma-coherent; + dmas = <&gpcdma 23>, <&gpcdma 23>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -702,6 +710,10 @@ pinctrl-names = "default", "idle"; pinctrl-0 = <&state_dpaux1_i2c>; pinctrl-1 = <&state_dpaux1_off>; + iommus = <&smmu TEGRA186_SID_GPCDMA_0>; + dma-coherent; + dmas = <&gpcdma 26>, <&gpcdma 26>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -733,6 +745,10 @@ pinctrl-names = "default", "idle"; pinctrl-0 = <&state_dpaux_i2c>; pinctrl-1 = <&state_dpaux_off>; + iommus = <&smmu TEGRA186_SID_GPCDMA_0>; + dma-coherent; + dmas = <&gpcdma 30>, <&gpcdma 30>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -746,6 +762,10 @@ clock-names = "div-clk"; resets = <&bpmp TEGRA186_RESET_I2C7>; reset-names = "i2c"; + iommus = <&smmu TEGRA186_SID_GPCDMA_0>; + dma-coherent; + dmas = <&gpcdma 27>, <&gpcdma 27>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -759,6 +779,10 @@ clock-names = "div-clk"; resets = <&bpmp TEGRA186_RESET_I2C9>; reset-names = "i2c"; + iommus = <&smmu TEGRA186_SID_GPCDMA_0>; + dma-coherent; + dmas = <&gpcdma 31>, <&gpcdma 31>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -1176,6 +1200,10 @@ clock-names = "div-clk"; resets = <&bpmp TEGRA186_RESET_I2C2>; reset-names = "i2c"; + iommus = <&smmu TEGRA186_SID_GPCDMA_0>; + dma-coherent; + dmas = <&gpcdma 22>, <&gpcdma 22>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -1189,6 +1217,10 @@ clock-names = "div-clk"; resets = <&bpmp TEGRA186_RESET_I2C8>; reset-names = "i2c"; + iommus = <&smmu TEGRA186_SID_GPCDMA_0>; + dma-coherent; + dmas = <&gpcdma 0>, <&gpcdma 0>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -1485,15 +1517,14 @@ iommus = <&smmu TEGRA186_SID_HOST1X>; /* Context isolation domains */ - iommu-map = < - 0 &smmu TEGRA186_SID_HOST1X_CTX0 1 - 1 &smmu TEGRA186_SID_HOST1X_CTX1 1 - 2 &smmu TEGRA186_SID_HOST1X_CTX2 1 - 3 &smmu TEGRA186_SID_HOST1X_CTX3 1 - 4 &smmu TEGRA186_SID_HOST1X_CTX4 1 - 5 &smmu TEGRA186_SID_HOST1X_CTX5 1 - 6 &smmu TEGRA186_SID_HOST1X_CTX6 1 - 7 &smmu TEGRA186_SID_HOST1X_CTX7 1>; + iommu-map = <0 &smmu TEGRA186_SID_HOST1X_CTX0 1>, + <1 &smmu TEGRA186_SID_HOST1X_CTX1 1>, + <2 &smmu TEGRA186_SID_HOST1X_CTX2 1>, + <3 &smmu TEGRA186_SID_HOST1X_CTX3 1>, + <4 &smmu TEGRA186_SID_HOST1X_CTX4 1>, + <5 &smmu TEGRA186_SID_HOST1X_CTX5 1>, + <6 &smmu TEGRA186_SID_HOST1X_CTX6 1>, + <7 &smmu TEGRA186_SID_HOST1X_CTX7 1>; dpaux1: dpaux@15040000 { compatible = "nvidia,tegra186-dpaux"; diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index d0ed55e5c860..41f3a7e188d0 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -805,6 +805,10 @@ clock-names = "div-clk"; resets = <&bpmp TEGRA194_RESET_I2C1>; reset-names = "i2c"; + iommus = <&smmu TEGRA194_SID_GPCDMA_0>; + dma-coherent; + dmas = <&gpcdma 21>, <&gpcdma 21>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -830,6 +834,10 @@ clock-names = "div-clk"; resets = <&bpmp TEGRA194_RESET_I2C3>; reset-names = "i2c"; + iommus = <&smmu TEGRA194_SID_GPCDMA_0>; + dma-coherent; + dmas = <&gpcdma 23>, <&gpcdma 23>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -847,6 +855,10 @@ pinctrl-0 = <&state_dpaux1_i2c>; pinctrl-1 = <&state_dpaux1_off>; pinctrl-names = "default", "idle"; + iommus = <&smmu TEGRA194_SID_GPCDMA_0>; + dma-coherent; + dmas = <&gpcdma 26>, <&gpcdma 26>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -864,6 +876,10 @@ pinctrl-0 = <&state_dpaux0_i2c>; pinctrl-1 = <&state_dpaux0_off>; pinctrl-names = "default", "idle"; + iommus = <&smmu TEGRA194_SID_GPCDMA_0>; + dma-coherent; + dmas = <&gpcdma 30>, <&gpcdma 30>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -881,6 +897,10 @@ pinctrl-0 = <&state_dpaux2_i2c>; pinctrl-1 = <&state_dpaux2_off>; pinctrl-names = "default", "idle"; + iommus = <&smmu TEGRA194_SID_GPCDMA_0>; + dma-coherent; + dmas = <&gpcdma 27>, <&gpcdma 27>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -898,6 +918,10 @@ pinctrl-0 = <&state_dpaux3_i2c>; pinctrl-1 = <&state_dpaux3_off>; pinctrl-names = "default", "idle"; + iommus = <&smmu TEGRA194_SID_GPCDMA_0>; + dma-coherent; + dmas = <&gpcdma 31>, <&gpcdma 31>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -1565,6 +1589,10 @@ clock-names = "div-clk"; resets = <&bpmp TEGRA194_RESET_I2C2>; reset-names = "i2c"; + iommus = <&smmu TEGRA194_SID_GPCDMA_0>; + dma-coherent; + dmas = <&gpcdma 22>, <&gpcdma 22>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -1578,6 +1606,10 @@ clock-names = "div-clk"; resets = <&bpmp TEGRA194_RESET_I2C8>; reset-names = "i2c"; + iommus = <&smmu TEGRA194_SID_GPCDMA_0>; + dma-coherent; + dmas = <&gpcdma 0>, <&gpcdma 0>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -1869,15 +1901,14 @@ iommus = <&smmu TEGRA194_SID_HOST1X>; /* Context isolation domains */ - iommu-map = < - 0 &smmu TEGRA194_SID_HOST1X_CTX0 1 - 1 &smmu TEGRA194_SID_HOST1X_CTX1 1 - 2 &smmu TEGRA194_SID_HOST1X_CTX2 1 - 3 &smmu TEGRA194_SID_HOST1X_CTX3 1 - 4 &smmu TEGRA194_SID_HOST1X_CTX4 1 - 5 &smmu TEGRA194_SID_HOST1X_CTX5 1 - 6 &smmu TEGRA194_SID_HOST1X_CTX6 1 - 7 &smmu TEGRA194_SID_HOST1X_CTX7 1>; + iommu-map = <0 &smmu TEGRA194_SID_HOST1X_CTX0 1>, + <1 &smmu TEGRA194_SID_HOST1X_CTX1 1>, + <2 &smmu TEGRA194_SID_HOST1X_CTX2 1>, + <3 &smmu TEGRA194_SID_HOST1X_CTX3 1>, + <4 &smmu TEGRA194_SID_HOST1X_CTX4 1>, + <5 &smmu TEGRA194_SID_HOST1X_CTX5 1>, + <6 &smmu TEGRA194_SID_HOST1X_CTX6 1>, + <7 &smmu TEGRA194_SID_HOST1X_CTX7 1>; nvdec@15140000 { compatible = "nvidia,tegra194-nvdec"; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts index 5f3a1c56b2eb..7c569695b705 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts @@ -17,6 +17,7 @@ aliases { serial0 = &uarta; + serial3 = &uartd; }; chosen { @@ -1309,6 +1310,22 @@ status = "okay"; }; + uartd: serial@70006300 { + compatible = "nvidia,tegra30-hsuart"; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43540-bt"; + max-speed = <4000000>; + brcm,bt-pcm-int-params = [01 02 00 01 01]; + device-wakeup-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(H, 5) IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "host-wakeup"; + }; + }; + i2c@7000c400 { status = "okay"; clock-frequency = <1000000>; @@ -1692,6 +1709,25 @@ }; }; + mmc@700b0200 { + power-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>; + bus-width = <4>; + non-removable; + vqmmc-supply = <&pp1800>; + vmmc-supply = <&pp3300>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + wifi@1 { + compatible = "brcm,bcm4354-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(H, 2) IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + }; + }; + mmc@700b0600 { bus-width = <8>; non-removable; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi index 798de9226ba5..9e4d72cfa69f 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi @@ -6,6 +6,42 @@ model = "NVIDIA Jetson AGX Orin"; compatible = "nvidia,p3701-0000", "nvidia,tegra234"; + vdd_1v8_ls: regulator-vdd-1v8-ls { + compatible = "regulator-fixed"; + regulator-name = "VDD_1V8_LS"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vdd_1v8_ao: regulator-vdd-1v8-ao { + compatible = "regulator-fixed"; + regulator-name = "VDD_1V8_AO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vdd_3v3_pcie: regulator-vdd-3v3-pcie { + compatible = "regulator-fixed"; + regulator-name = "VDD_3V3_PCIE"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio TEGRA234_MAIN_GPIO(Z, 2) GPIO_ACTIVE_HIGH>; + regulator-boot-on; + enable-active-high; + }; + + vdd_12v_pcie: regulator-vdd-12v-pcie { + compatible = "regulator-fixed"; + regulator-name = "VDD_12V_PCIE"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + gpio = <&gpio TEGRA234_MAIN_GPIO(A, 1) GPIO_ACTIVE_LOW>; + regulator-boot-on; + enable-active-low; + }; + bus@0 { spi@3270000 { status = "okay"; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts index 02a10bb38562..57ab75328814 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts @@ -2009,6 +2009,7 @@ hda@3510000 { nvidia,model = "NVIDIA Jetson AGX Orin HDA"; + status = "okay"; }; }; @@ -2017,6 +2018,27 @@ stdout-path = "serial0:115200n8"; }; + bus@0 { + ethernet@6800000 { + status = "okay"; + + phy-handle = <&mgbe0_phy>; + phy-mode = "usxgmii"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + mgbe0_phy: phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + + #phy-cells = <0>; + }; + }; + }; + }; + gpio-keys { compatible = "gpio-keys"; status = "okay"; @@ -2111,4 +2133,55 @@ label = "NVIDIA Jetson AGX Orin APE"; }; + + pcie@14100000 { + status = "okay"; + + vddio-pex-ctl-supply = <&vdd_1v8_ao>; + + phys = <&p2u_hsio_3>; + phy-names = "p2u-0"; + }; + + pcie@14160000 { + status = "okay"; + + vddio-pex-ctl-supply = <&vdd_1v8_ao>; + + phys = <&p2u_hsio_4>, <&p2u_hsio_5>, <&p2u_hsio_6>, + <&p2u_hsio_7>; + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3"; + }; + + pcie@141a0000 { + status = "okay"; + + vddio-pex-ctl-supply = <&vdd_1v8_ls>; + vpcie3v3-supply = <&vdd_3v3_pcie>; + vpcie12v-supply = <&vdd_12v_pcie>; + + phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>, + <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>, + <&p2u_nvhs_6>, <&p2u_nvhs_7>; + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4", + "p2u-5", "p2u-6", "p2u-7"; + }; + + pcie-ep@141a0000 { + status = "disabled"; + + vddio-pex-ctl-supply = <&vdd_1v8_ls>; + + reset-gpios = <&gpio TEGRA234_MAIN_GPIO(AF, 1) GPIO_ACTIVE_LOW>; + + nvidia,refclk-select-gpios = <&gpio_aon + TEGRA234_AON_GPIO(AA, 4) + GPIO_ACTIVE_HIGH>; + + phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>, + <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>, + <&p2u_nvhs_6>, <&p2u_nvhs_7>; + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4", + "p2u-5", "p2u-6", "p2u-7"; + }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra234.dtsi b/arch/arm64/boot/dts/nvidia/tegra234.dtsi index 81a0f599685f..0170bfa8a467 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra234.dtsi @@ -23,7 +23,6 @@ gpcdma: dma-controller@2600000 { compatible = "nvidia,tegra234-gpcdma", - "nvidia,tegra194-gpcdma", "nvidia,tegra186-gpcdma"; reg = <0x2600000 0x210000>; resets = <&bpmp TEGRA234_RESET_GPCDMA>; @@ -570,6 +569,24 @@ interconnect-names = "dma-mem"; iommus = <&smmu_niso1 TEGRA234_SID_HOST1X>; + /* Context isolation domains */ + iommu-map = <0 &smmu_niso0 TEGRA234_SID_HOST1X_CTX0 1>, + <1 &smmu_niso0 TEGRA234_SID_HOST1X_CTX1 1>, + <2 &smmu_niso0 TEGRA234_SID_HOST1X_CTX2 1>, + <3 &smmu_niso0 TEGRA234_SID_HOST1X_CTX3 1>, + <4 &smmu_niso0 TEGRA234_SID_HOST1X_CTX4 1>, + <5 &smmu_niso0 TEGRA234_SID_HOST1X_CTX5 1>, + <6 &smmu_niso0 TEGRA234_SID_HOST1X_CTX6 1>, + <7 &smmu_niso0 TEGRA234_SID_HOST1X_CTX7 1>, + <8 &smmu_niso1 TEGRA234_SID_HOST1X_CTX0 1>, + <9 &smmu_niso1 TEGRA234_SID_HOST1X_CTX1 1>, + <10 &smmu_niso1 TEGRA234_SID_HOST1X_CTX2 1>, + <11 &smmu_niso1 TEGRA234_SID_HOST1X_CTX3 1>, + <12 &smmu_niso1 TEGRA234_SID_HOST1X_CTX4 1>, + <13 &smmu_niso1 TEGRA234_SID_HOST1X_CTX5 1>, + <14 &smmu_niso1 TEGRA234_SID_HOST1X_CTX6 1>, + <15 &smmu_niso1 TEGRA234_SID_HOST1X_CTX7 1>; + vic@15340000 { compatible = "nvidia,tegra234-vic"; reg = <0x15340000 0x00040000>; @@ -737,6 +754,10 @@ clock-names = "div-clk", "parent"; resets = <&bpmp TEGRA234_RESET_I2C1>; reset-names = "i2c"; + iommus = <&smmu_niso0 TEGRA234_SID_GPCDMA>; + dma-coherent; + dmas = <&gpcdma 21>, <&gpcdma 21>; + dma-names = "rx", "tx"; }; cam_i2c: i2c@3180000 { @@ -752,6 +773,10 @@ clock-names = "div-clk", "parent"; resets = <&bpmp TEGRA234_RESET_I2C3>; reset-names = "i2c"; + iommus = <&smmu_niso0 TEGRA234_SID_GPCDMA>; + dma-coherent; + dmas = <&gpcdma 23>, <&gpcdma 23>; + dma-names = "rx", "tx"; }; dp_aux_ch1_i2c: i2c@3190000 { @@ -767,6 +792,10 @@ clock-names = "div-clk", "parent"; resets = <&bpmp TEGRA234_RESET_I2C4>; reset-names = "i2c"; + iommus = <&smmu_niso0 TEGRA234_SID_GPCDMA>; + dma-coherent; + dmas = <&gpcdma 26>, <&gpcdma 26>; + dma-names = "rx", "tx"; }; dp_aux_ch0_i2c: i2c@31b0000 { @@ -782,6 +811,10 @@ clock-names = "div-clk", "parent"; resets = <&bpmp TEGRA234_RESET_I2C6>; reset-names = "i2c"; + iommus = <&smmu_niso0 TEGRA234_SID_GPCDMA>; + dma-coherent; + dmas = <&gpcdma 30>, <&gpcdma 30>; + dma-names = "rx", "tx"; }; dp_aux_ch2_i2c: i2c@31c0000 { @@ -797,6 +830,10 @@ clock-names = "div-clk", "parent"; resets = <&bpmp TEGRA234_RESET_I2C7>; reset-names = "i2c"; + iommus = <&smmu_niso0 TEGRA234_SID_GPCDMA>; + dma-coherent; + dmas = <&gpcdma 27>, <&gpcdma 27>; + dma-names = "rx", "tx"; }; dp_aux_ch3_i2c: i2c@31e0000 { @@ -812,6 +849,10 @@ clock-names = "div-clk", "parent"; resets = <&bpmp TEGRA234_RESET_I2C9>; reset-names = "i2c"; + iommus = <&smmu_niso0 TEGRA234_SID_GPCDMA>; + dma-coherent; + dmas = <&gpcdma 31>, <&gpcdma 31>; + dma-names = "rx", "tx"; }; spi@3270000 { @@ -897,6 +938,7 @@ interconnects = <&mc TEGRA234_MEMORY_CLIENT_HDAR &emc>, <&mc TEGRA234_MEMORY_CLIENT_HDAW &emc>; interconnect-names = "dma-mem", "write"; + iommus = <&smmu_niso0 TEGRA234_SID_HDA>; status = "disabled"; }; @@ -925,6 +967,142 @@ #mbox-cells = <2>; }; + ethernet@6800000 { + compatible = "nvidia,tegra234-mgbe"; + reg = <0x06800000 0x10000>, + <0x06810000 0x10000>, + <0x068a0000 0x10000>; + reg-names = "hypervisor", "mac", "xpcs"; + interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "common"; + clocks = <&bpmp TEGRA234_CLK_MGBE0_APP>, + <&bpmp TEGRA234_CLK_MGBE0_MAC>, + <&bpmp TEGRA234_CLK_MGBE0_MAC_DIVIDER>, + <&bpmp TEGRA234_CLK_MGBE0_PTP_REF>, + <&bpmp TEGRA234_CLK_MGBE0_RX_INPUT_M>, + <&bpmp TEGRA234_CLK_MGBE0_RX_INPUT>, + <&bpmp TEGRA234_CLK_MGBE0_TX>, + <&bpmp TEGRA234_CLK_MGBE0_EEE_PCS>, + <&bpmp TEGRA234_CLK_MGBE0_RX_PCS_INPUT>, + <&bpmp TEGRA234_CLK_MGBE0_RX_PCS_M>, + <&bpmp TEGRA234_CLK_MGBE0_RX_PCS>, + <&bpmp TEGRA234_CLK_MGBE0_TX_PCS>; + clock-names = "mgbe", "mac", "mac-divider", "ptp-ref", "rx-input-m", + "rx-input", "tx", "eee-pcs", "rx-pcs-input", "rx-pcs-m", + "rx-pcs", "tx-pcs"; + resets = <&bpmp TEGRA234_RESET_MGBE0_MAC>, + <&bpmp TEGRA234_RESET_MGBE0_PCS>; + reset-names = "mac", "pcs"; + interconnects = <&mc TEGRA234_MEMORY_CLIENT_MGBEARD &emc>, + <&mc TEGRA234_MEMORY_CLIENT_MGBEAWR &emc>; + interconnect-names = "dma-mem", "write"; + iommus = <&smmu_niso0 TEGRA234_SID_MGBE>; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEA>; + status = "disabled"; + }; + + ethernet@6900000 { + compatible = "nvidia,tegra234-mgbe"; + reg = <0x06900000 0x10000>, + <0x06910000 0x10000>, + <0x069a0000 0x10000>; + reg-names = "hypervisor", "mac", "xpcs"; + interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "common"; + clocks = <&bpmp TEGRA234_CLK_MGBE1_APP>, + <&bpmp TEGRA234_CLK_MGBE1_MAC>, + <&bpmp TEGRA234_CLK_MGBE1_MAC_DIVIDER>, + <&bpmp TEGRA234_CLK_MGBE1_PTP_REF>, + <&bpmp TEGRA234_CLK_MGBE1_RX_INPUT_M>, + <&bpmp TEGRA234_CLK_MGBE1_RX_INPUT>, + <&bpmp TEGRA234_CLK_MGBE1_TX>, + <&bpmp TEGRA234_CLK_MGBE1_EEE_PCS>, + <&bpmp TEGRA234_CLK_MGBE1_RX_PCS_INPUT>, + <&bpmp TEGRA234_CLK_MGBE1_RX_PCS_M>, + <&bpmp TEGRA234_CLK_MGBE1_RX_PCS>, + <&bpmp TEGRA234_CLK_MGBE1_TX_PCS>; + clock-names = "mgbe", "mac", "mac-divider", "ptp-ref", "rx-input-m", + "rx-input", "tx", "eee-pcs", "rx-pcs-input", "rx-pcs-m", + "rx-pcs", "tx-pcs"; + resets = <&bpmp TEGRA234_RESET_MGBE1_MAC>, + <&bpmp TEGRA234_RESET_MGBE1_PCS>; + reset-names = "mac", "pcs"; + interconnects = <&mc TEGRA234_MEMORY_CLIENT_MGBEBRD &emc>, + <&mc TEGRA234_MEMORY_CLIENT_MGBEBWR &emc>; + interconnect-names = "dma-mem", "write"; + iommus = <&smmu_niso0 TEGRA234_SID_MGBE_VF1>; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEB>; + status = "disabled"; + }; + + ethernet@6a00000 { + compatible = "nvidia,tegra234-mgbe"; + reg = <0x06a00000 0x10000>, + <0x06a10000 0x10000>, + <0x06aa0000 0x10000>; + reg-names = "hypervisor", "mac", "xpcs"; + interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "common"; + clocks = <&bpmp TEGRA234_CLK_MGBE2_APP>, + <&bpmp TEGRA234_CLK_MGBE2_MAC>, + <&bpmp TEGRA234_CLK_MGBE2_MAC_DIVIDER>, + <&bpmp TEGRA234_CLK_MGBE2_PTP_REF>, + <&bpmp TEGRA234_CLK_MGBE2_RX_INPUT_M>, + <&bpmp TEGRA234_CLK_MGBE2_RX_INPUT>, + <&bpmp TEGRA234_CLK_MGBE2_TX>, + <&bpmp TEGRA234_CLK_MGBE2_EEE_PCS>, + <&bpmp TEGRA234_CLK_MGBE2_RX_PCS_INPUT>, + <&bpmp TEGRA234_CLK_MGBE2_RX_PCS_M>, + <&bpmp TEGRA234_CLK_MGBE2_RX_PCS>, + <&bpmp TEGRA234_CLK_MGBE2_TX_PCS>; + clock-names = "mgbe", "mac", "mac-divider", "ptp-ref", "rx-input-m", + "rx-input", "tx", "eee-pcs", "rx-pcs-input", "rx-pcs-m", + "rx-pcs", "tx-pcs"; + resets = <&bpmp TEGRA234_RESET_MGBE2_MAC>, + <&bpmp TEGRA234_RESET_MGBE2_PCS>; + reset-names = "mac", "pcs"; + interconnects = <&mc TEGRA234_MEMORY_CLIENT_MGBECRD &emc>, + <&mc TEGRA234_MEMORY_CLIENT_MGBECWR &emc>; + interconnect-names = "dma-mem", "write"; + iommus = <&smmu_niso0 TEGRA234_SID_MGBE_VF2>; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEC>; + status = "disabled"; + }; + + ethernet@6b00000 { + compatible = "nvidia,tegra234-mgbe"; + reg = <0x06b00000 0x10000>, + <0x06b10000 0x10000>, + <0x06ba0000 0x10000>; + reg-names = "hypervisor", "mac", "xpcs"; + interrupts = <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "common"; + clocks = <&bpmp TEGRA234_CLK_MGBE3_APP>, + <&bpmp TEGRA234_CLK_MGBE3_MAC>, + <&bpmp TEGRA234_CLK_MGBE3_MAC_DIVIDER>, + <&bpmp TEGRA234_CLK_MGBE3_PTP_REF>, + <&bpmp TEGRA234_CLK_MGBE3_RX_INPUT_M>, + <&bpmp TEGRA234_CLK_MGBE3_RX_INPUT>, + <&bpmp TEGRA234_CLK_MGBE3_TX>, + <&bpmp TEGRA234_CLK_MGBE3_EEE_PCS>, + <&bpmp TEGRA234_CLK_MGBE3_RX_PCS_INPUT>, + <&bpmp TEGRA234_CLK_MGBE3_RX_PCS_M>, + <&bpmp TEGRA234_CLK_MGBE3_RX_PCS>, + <&bpmp TEGRA234_CLK_MGBE3_TX_PCS>; + clock-names = "mgbe", "mac", "mac-divider", "ptp-ref", "rx-input-m", + "rx-input", "tx", "eee-pcs", "rx-pcs-input", "rx-pcs-m", + "rx-pcs", "tx-pcs"; + resets = <&bpmp TEGRA234_RESET_MGBE3_MAC>, + <&bpmp TEGRA234_RESET_MGBE3_PCS>; + reset-names = "mac", "pcs"; + interconnects = <&mc TEGRA234_MEMORY_CLIENT_MGBEDRD &emc>, + <&mc TEGRA234_MEMORY_CLIENT_MGBEDWR &emc>; + interconnect-names = "dma-mem", "write"; + iommus = <&smmu_niso0 TEGRA234_SID_MGBE_VF3>; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBED>; + status = "disabled"; + }; + smmu_niso1: iommu@8000000 { compatible = "nvidia,tegra234-smmu", "nvidia,smmu-500"; reg = <0x8000000 0x1000000>, @@ -1081,6 +1259,198 @@ status = "okay"; }; + p2u_hsio_0: phy@3e00000 { + compatible = "nvidia,tegra234-p2u"; + reg = <0x03e00000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_hsio_1: phy@3e10000 { + compatible = "nvidia,tegra234-p2u"; + reg = <0x03e10000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_hsio_2: phy@3e20000 { + compatible = "nvidia,tegra234-p2u"; + reg = <0x03e20000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_hsio_3: phy@3e30000 { + compatible = "nvidia,tegra234-p2u"; + reg = <0x03e30000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_hsio_4: phy@3e40000 { + compatible = "nvidia,tegra234-p2u"; + reg = <0x03e40000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_hsio_5: phy@3e50000 { + compatible = "nvidia,tegra234-p2u"; + reg = <0x03e50000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_hsio_6: phy@3e60000 { + compatible = "nvidia,tegra234-p2u"; + reg = <0x03e60000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_hsio_7: phy@3e70000 { + compatible = "nvidia,tegra234-p2u"; + reg = <0x03e70000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_nvhs_0: phy@3e90000 { + compatible = "nvidia,tegra234-p2u"; + reg = <0x03e90000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_nvhs_1: phy@3ea0000 { + compatible = "nvidia,tegra234-p2u"; + reg = <0x03ea0000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_nvhs_2: phy@3eb0000 { + compatible = "nvidia,tegra234-p2u"; + reg = <0x03eb0000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_nvhs_3: phy@3ec0000 { + compatible = "nvidia,tegra234-p2u"; + reg = <0x03ec0000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_nvhs_4: phy@3ed0000 { + compatible = "nvidia,tegra234-p2u"; + reg = <0x03ed0000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_nvhs_5: phy@3ee0000 { + compatible = "nvidia,tegra234-p2u"; + reg = <0x03ee0000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_nvhs_6: phy@3ef0000 { + compatible = "nvidia,tegra234-p2u"; + reg = <0x03ef0000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_nvhs_7: phy@3f00000 { + compatible = "nvidia,tegra234-p2u"; + reg = <0x03f00000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_gbe_0: phy@3f20000 { + compatible = "nvidia,tegra234-p2u"; + reg = <0x03f20000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_gbe_1: phy@3f30000 { + compatible = "nvidia,tegra234-p2u"; + reg = <0x03f30000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_gbe_2: phy@3f40000 { + compatible = "nvidia,tegra234-p2u"; + reg = <0x03f40000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_gbe_3: phy@3f50000 { + compatible = "nvidia,tegra234-p2u"; + reg = <0x03f50000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_gbe_4: phy@3f60000 { + compatible = "nvidia,tegra234-p2u"; + reg = <0x03f60000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_gbe_5: phy@3f70000 { + compatible = "nvidia,tegra234-p2u"; + reg = <0x03f70000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_gbe_6: phy@3f80000 { + compatible = "nvidia,tegra234-p2u"; + reg = <0x03f80000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_gbe_7: phy@3f90000 { + compatible = "nvidia,tegra234-p2u"; + reg = <0x03f90000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + hsp_aon: hsp@c150000 { compatible = "nvidia,tegra234-hsp", "nvidia,tegra194-hsp"; reg = <0x0c150000 0x90000>; @@ -1109,6 +1479,10 @@ assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>; resets = <&bpmp TEGRA234_RESET_I2C2>; reset-names = "i2c"; + iommus = <&smmu_niso0 TEGRA234_SID_GPCDMA>; + dma-coherent; + dmas = <&gpcdma 22>, <&gpcdma 22>; + dma-names = "rx", "tx"; }; gen8_i2c: i2c@c250000 { @@ -1125,6 +1499,10 @@ assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>; resets = <&bpmp TEGRA234_RESET_I2C8>; reset-names = "i2c"; + iommus = <&smmu_niso0 TEGRA234_SID_GPCDMA>; + dma-coherent; + dmas = <&gpcdma 0>, <&gpcdma 0>; + dma-names = "rx", "tx"; }; rtc@c2a0000 { @@ -1495,6 +1873,741 @@ status = "okay"; }; + pcie@140a0000 { + compatible = "nvidia,tegra234-pcie"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4CA>; + reg = <0x00 0x140a0000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x2a000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x2a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x2a080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg-names = "appl", "config", "atu_dma", "dbi"; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <4>; + num-viewport = <8>; + linux,pci-domain = <8>; + + clocks = <&bpmp TEGRA234_CLK_PEX2_C8_CORE>; + clock-names = "core"; + + resets = <&bpmp TEGRA234_RESET_PEX2_CORE_8_APB>, + <&bpmp TEGRA234_RESET_PEX2_CORE_8>; + reset-names = "apb", "core"; + + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + + nvidia,bpmp = <&bpmp 8>; + + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + bus-range = <0x0 0xff>; + + ranges = <0x43000000 0x32 0x40000000 0x32 0x40000000 0x2 0xe8000000>, /* prefetchable memory (11904 MB) */ + <0x02000000 0x0 0x40000000 0x35 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */ + <0x01000000 0x0 0x2a100000 0x00 0x2a100000 0x0 0x00100000>; /* downstream I/O (1 MB) */ + + interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE8AR &emc>, + <&mc TEGRA234_MEMORY_CLIENT_PCIE8AW &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu_niso1 TEGRA234_SID_PCIE8 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; + + status = "disabled"; + }; + + pcie@140c0000 { + compatible = "nvidia,tegra234-pcie"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4CB>; + reg = <0x00 0x140c0000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x2c000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x2c040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x2c080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg-names = "appl", "config", "atu_dma", "dbi"; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <4>; + num-viewport = <8>; + linux,pci-domain = <9>; + + clocks = <&bpmp TEGRA234_CLK_PEX2_C9_CORE>; + clock-names = "core"; + + resets = <&bpmp TEGRA234_RESET_PEX2_CORE_9_APB>, + <&bpmp TEGRA234_RESET_PEX2_CORE_9>; + reset-names = "apb", "core"; + + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + + nvidia,bpmp = <&bpmp 9>; + + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + bus-range = <0x0 0xff>; + + ranges = <0x43000000 0x35 0x40000000 0x35 0x40000000 0x2 0xe8000000>, /* prefetchable memory (11904 MB) */ + <0x02000000 0x0 0x40000000 0x38 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */ + <0x01000000 0x0 0x2c100000 0x00 0x2c100000 0x0 0x00100000>; /* downstream I/O (1 MB) */ + + interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE9AR &emc>, + <&mc TEGRA234_MEMORY_CLIENT_PCIE9AW &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu_niso0 TEGRA234_SID_PCIE9 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; + + status = "disabled"; + }; + + pcie@140e0000 { + compatible = "nvidia,tegra234-pcie"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4CC>; + reg = <0x00 0x140e0000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x2e000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x2e040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x2e080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg-names = "appl", "config", "atu_dma", "dbi"; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <4>; + num-viewport = <8>; + linux,pci-domain = <10>; + + clocks = <&bpmp TEGRA234_CLK_PEX2_C10_CORE>; + clock-names = "core"; + + resets = <&bpmp TEGRA234_RESET_PEX2_CORE_10_APB>, + <&bpmp TEGRA234_RESET_PEX2_CORE_10>; + reset-names = "apb", "core"; + + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + + nvidia,bpmp = <&bpmp 10>; + + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + bus-range = <0x0 0xff>; + + ranges = <0x43000000 0x38 0x40000000 0x38 0x40000000 0x2 0xe8000000>, /* prefetchable memory (11904 MB) */ + <0x02000000 0x0 0x40000000 0x3b 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */ + <0x01000000 0x0 0x2e100000 0x00 0x2e100000 0x0 0x00100000>; /* downstream I/O (1 MB) */ + + interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE10AR &emc>, + <&mc TEGRA234_MEMORY_CLIENT_PCIE10AW &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu_niso1 TEGRA234_SID_PCIE10 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; + + status = "disabled"; + }; + + pcie@14100000 { + compatible = "nvidia,tegra234-pcie"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX1A>; + reg = <0x00 0x14100000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x30000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x30040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x30080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg-names = "appl", "config", "atu_dma", "dbi"; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <1>; + num-viewport = <8>; + linux,pci-domain = <1>; + + clocks = <&bpmp TEGRA234_CLK_PEX0_C1_CORE>; + clock-names = "core"; + + resets = <&bpmp TEGRA234_RESET_PEX0_CORE_1_APB>, + <&bpmp TEGRA234_RESET_PEX0_CORE_1>; + reset-names = "apb", "core"; + + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + + nvidia,bpmp = <&bpmp 1>; + + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + bus-range = <0x0 0xff>; + + ranges = <0x43000000 0x20 0x80000000 0x20 0x80000000 0x0 0x28000000>, /* prefetchable memory (640 MB) */ + <0x02000000 0x0 0x40000000 0x20 0xa8000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */ + <0x01000000 0x0 0x30100000 0x00 0x30100000 0x0 0x00100000>; /* downstream I/O (1 MB) */ + + interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE1R &emc>, + <&mc TEGRA234_MEMORY_CLIENT_PCIE1W &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu_niso1 TEGRA234_SID_PCIE1 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; + + status = "disabled"; + }; + + pcie@14120000 { + compatible = "nvidia,tegra234-pcie"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX1A>; + reg = <0x00 0x14120000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x32000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x32040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x32080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg-names = "appl", "config", "atu_dma", "dbi"; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <1>; + num-viewport = <8>; + linux,pci-domain = <2>; + + clocks = <&bpmp TEGRA234_CLK_PEX0_C2_CORE>; + clock-names = "core"; + + resets = <&bpmp TEGRA234_RESET_PEX0_CORE_2_APB>, + <&bpmp TEGRA234_RESET_PEX0_CORE_2>; + reset-names = "apb", "core"; + + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + + nvidia,bpmp = <&bpmp 2>; + + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + bus-range = <0x0 0xff>; + + ranges = <0x43000000 0x20 0xc0000000 0x20 0xc0000000 0x0 0x28000000>, /* prefetchable memory (640 MB) */ + <0x02000000 0x0 0x40000000 0x20 0xe8000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */ + <0x01000000 0x0 0x32100000 0x00 0x32100000 0x0 0x00100000>; /* downstream I/O (1 MB) */ + + interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE2AR &emc>, + <&mc TEGRA234_MEMORY_CLIENT_PCIE2AW &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu_niso1 TEGRA234_SID_PCIE2 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; + + status = "disabled"; + }; + + pcie@14140000 { + compatible = "nvidia,tegra234-pcie"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX1A>; + reg = <0x00 0x14140000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x34000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x34040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x34080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg-names = "appl", "config", "atu_dma", "dbi"; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <1>; + num-viewport = <8>; + linux,pci-domain = <3>; + + clocks = <&bpmp TEGRA234_CLK_PEX0_C3_CORE>; + clock-names = "core"; + + resets = <&bpmp TEGRA234_RESET_PEX0_CORE_3_APB>, + <&bpmp TEGRA234_RESET_PEX0_CORE_3>; + reset-names = "apb", "core"; + + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + + nvidia,bpmp = <&bpmp 3>; + + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + bus-range = <0x0 0xff>; + + ranges = <0x43000000 0x21 0x00000000 0x21 0x00000000 0x0 0x28000000>, /* prefetchable memory (640 MB) */ + <0x02000000 0x0 0x40000000 0x21 0xe8000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */ + <0x01000000 0x0 0x34100000 0x00 0x34100000 0x0 0x00100000>; /* downstream I/O (1 MB) */ + + interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE3R &emc>, + <&mc TEGRA234_MEMORY_CLIENT_PCIE3W &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu_niso1 TEGRA234_SID_PCIE3 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; + + status = "disabled"; + }; + + pcie@14160000 { + compatible = "nvidia,tegra234-pcie"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4BB>; + reg = <0x00 0x14160000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x36000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x36040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x36080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg-names = "appl", "config", "atu_dma", "dbi"; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <4>; + num-viewport = <8>; + linux,pci-domain = <4>; + + clocks = <&bpmp TEGRA234_CLK_PEX0_C4_CORE>; + clock-names = "core"; + + resets = <&bpmp TEGRA234_RESET_PEX0_CORE_4_APB>, + <&bpmp TEGRA234_RESET_PEX0_CORE_4>; + reset-names = "apb", "core"; + + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + + nvidia,bpmp = <&bpmp 4>; + + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + bus-range = <0x0 0xff>; + + ranges = <0x43000000 0x21 0x40000000 0x21 0x40000000 0x2 0xe8000000>, /* prefetchable memory (11904 MB) */ + <0x02000000 0x0 0x40000000 0x24 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */ + <0x01000000 0x0 0x36100000 0x00 0x36100000 0x0 0x00100000>; /* downstream I/O (1 MB) */ + + interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE4R &emc>, + <&mc TEGRA234_MEMORY_CLIENT_PCIE4W &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu_niso0 TEGRA234_SID_PCIE4 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; + + status = "disabled"; + }; + + pcie@14180000 { + compatible = "nvidia,tegra234-pcie"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4BA>; + reg = <0x00 0x14180000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x38000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x38040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x38080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg-names = "appl", "config", "atu_dma", "dbi"; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <4>; + num-viewport = <8>; + linux,pci-domain = <0>; + + clocks = <&bpmp TEGRA234_CLK_PEX0_C0_CORE>; + clock-names = "core"; + + resets = <&bpmp TEGRA234_RESET_PEX0_CORE_0_APB>, + <&bpmp TEGRA234_RESET_PEX0_CORE_0>; + reset-names = "apb", "core"; + + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + + nvidia,bpmp = <&bpmp 0>; + + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + bus-range = <0x0 0xff>; + + ranges = <0x43000000 0x24 0x40000000 0x24 0x40000000 0x2 0xe8000000>, /* prefetchable memory (11904 MB) */ + <0x02000000 0x0 0x40000000 0x27 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */ + <0x01000000 0x0 0x38100000 0x00 0x38100000 0x0 0x00100000>; /* downstream I/O (1 MB) */ + + interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE0R &emc>, + <&mc TEGRA234_MEMORY_CLIENT_PCIE0W &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu_niso0 TEGRA234_SID_PCIE0 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; + + status = "disabled"; + }; + + pcie@141a0000 { + compatible = "nvidia,tegra234-pcie"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX8A>; + reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x3a000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x3a080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg-names = "appl", "config", "atu_dma", "dbi"; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <8>; + num-viewport = <8>; + linux,pci-domain = <5>; + + clocks = <&bpmp TEGRA234_CLK_PEX1_C5_CORE>; + clock-names = "core"; + + resets = <&bpmp TEGRA234_RESET_PEX1_CORE_5_APB>, + <&bpmp TEGRA234_RESET_PEX1_CORE_5>; + reset-names = "apb", "core"; + + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + + nvidia,bpmp = <&bpmp 5>; + + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + bus-range = <0x0 0xff>; + + ranges = <0x43000000 0x27 0x40000000 0x27 0x40000000 0x3 0xe8000000>, /* prefetchable memory (16000 MB) */ + <0x02000000 0x0 0x40000000 0x2b 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */ + <0x01000000 0x0 0x3a100000 0x00 0x3a100000 0x0 0x00100000>; /* downstream I/O (1 MB) */ + + interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE5R &emc>, + <&mc TEGRA234_MEMORY_CLIENT_PCIE5W &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu_niso0 TEGRA234_SID_PCIE5 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; + + status = "disabled"; + }; + + pcie@141c0000 { + compatible = "nvidia,tegra234-pcie"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4A>; + reg = <0x00 0x141c0000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x3c000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x3c040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x3c080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg-names = "appl", "config", "atu_dma", "dbi"; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <4>; + num-viewport = <8>; + linux,pci-domain = <6>; + + clocks = <&bpmp TEGRA234_CLK_PEX1_C6_CORE>; + clock-names = "core"; + + resets = <&bpmp TEGRA234_RESET_PEX1_CORE_6_APB>, + <&bpmp TEGRA234_RESET_PEX1_CORE_6>; + reset-names = "apb", "core"; + + interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; + + nvidia,bpmp = <&bpmp 6>; + + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + bus-range = <0x0 0xff>; + + ranges = <0x43000000 0x2b 0x40000000 0x2b 0x40000000 0x2 0xe8000000>, /* prefetchable memory (11904 MB) */ + <0x02000000 0x0 0x40000000 0x2e 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */ + <0x01000000 0x0 0x3c100000 0x00 0x3c100000 0x0 0x00100000>; /* downstream I/O (1 MB) */ + + interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE6AR &emc>, + <&mc TEGRA234_MEMORY_CLIENT_PCIE6AW &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu_niso0 TEGRA234_SID_PCIE6 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; + + status = "disabled"; + }; + + pcie@141e0000 { + compatible = "nvidia,tegra234-pcie"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX8B>; + reg = <0x00 0x141e0000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x3e000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x3e040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x3e080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg-names = "appl", "config", "atu_dma", "dbi"; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <8>; + num-viewport = <8>; + linux,pci-domain = <7>; + + clocks = <&bpmp TEGRA234_CLK_PEX2_C7_CORE>; + clock-names = "core"; + + resets = <&bpmp TEGRA234_RESET_PEX2_CORE_7_APB>, + <&bpmp TEGRA234_RESET_PEX2_CORE_7>; + reset-names = "apb", "core"; + + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + + nvidia,bpmp = <&bpmp 7>; + + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + bus-range = <0x0 0xff>; + + ranges = <0x43000000 0x2e 0x40000000 0x2e 0x40000000 0x3 0xe8000000>, /* prefetchable memory (16000 MB) */ + <0x02000000 0x0 0x40000000 0x32 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */ + <0x01000000 0x0 0x3e100000 0x00 0x3e100000 0x0 0x00100000>; /* downstream I/O (1 MB) */ + + interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE7AR &emc>, + <&mc TEGRA234_MEMORY_CLIENT_PCIE7AW &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu_niso1 TEGRA234_SID_PCIE7 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; + + status = "disabled"; + }; + + pcie-ep@141a0000 { + compatible = "nvidia,tegra234-pcie-ep"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX8A>; + reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x3a080000 0x0 0x00040000>, /* DBI reg space (256K) */ + <0x27 0x40000000 0x4 0x00000000>; /* Address Space (16G) */ + reg-names = "appl", "atu_dma", "dbi", "addr_space"; + + num-lanes = <8>; + + clocks = <&bpmp TEGRA234_CLK_PEX1_C5_CORE>; + clock-names = "core"; + + resets = <&bpmp TEGRA234_RESET_PEX1_CORE_5_APB>, + <&bpmp TEGRA234_RESET_PEX1_CORE_5>; + reset-names = "apb", "core"; + + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ + interrupt-names = "intr"; + + nvidia,bpmp = <&bpmp 5>; + + nvidia,enable-ext-refclk; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE5R &emc>, + <&mc TEGRA234_MEMORY_CLIENT_PCIE5W &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu_niso0 TEGRA234_SID_PCIE5 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; + + status = "disabled"; + }; + + pcie-ep@141c0000{ + compatible = "nvidia,tegra234-pcie-ep"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4A>; + reg = <0x00 0x141c0000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x3c040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x3c080000 0x0 0x00040000>, /* DBI space (256K) */ + <0x2b 0x40000000 0x3 0x00000000>; /* Address Space (12G) */ + reg-names = "appl", "atu_dma", "dbi", "addr_space"; + + num-lanes = <4>; + + clocks = <&bpmp TEGRA234_CLK_PEX1_C6_CORE>; + clock-names = "core"; + + resets = <&bpmp TEGRA234_RESET_PEX1_CORE_6_APB>, + <&bpmp TEGRA234_RESET_PEX1_CORE_6>; + reset-names = "apb", "core"; + + interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ + interrupt-names = "intr"; + + nvidia,bpmp = <&bpmp 6>; + + nvidia,enable-ext-refclk; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE6AR &emc>, + <&mc TEGRA234_MEMORY_CLIENT_PCIE6AW &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu_niso0 TEGRA234_SID_PCIE6 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; + + status = "disabled"; + }; + + pcie-ep@141e0000{ + compatible = "nvidia,tegra234-pcie-ep"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX8B>; + reg = <0x00 0x141e0000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x3e040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x3e080000 0x0 0x00040000>, /* DBI space (256K) */ + <0x2e 0x40000000 0x4 0x00000000>; /* Address Space (16G) */ + reg-names = "appl", "atu_dma", "dbi", "addr_space"; + + num-lanes = <8>; + + clocks = <&bpmp TEGRA234_CLK_PEX2_C7_CORE>; + clock-names = "core"; + + resets = <&bpmp TEGRA234_RESET_PEX2_CORE_7_APB>, + <&bpmp TEGRA234_RESET_PEX2_CORE_7>; + reset-names = "apb", "core"; + + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ + interrupt-names = "intr"; + + nvidia,bpmp = <&bpmp 7>; + + nvidia,enable-ext-refclk; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE7AR &emc>, + <&mc TEGRA234_MEMORY_CLIENT_PCIE7AW &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu_niso1 TEGRA234_SID_PCIE7 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; + + status = "disabled"; + }; + + pcie-ep@140e0000{ + compatible = "nvidia,tegra234-pcie-ep"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4CC>; + reg = <0x00 0x140e0000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x2e040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x2e080000 0x0 0x00040000>, /* DBI space (256K) */ + <0x38 0x40000000 0x3 0x00000000>; /* Address Space (12G) */ + reg-names = "appl", "atu_dma", "dbi", "addr_space"; + + num-lanes = <4>; + + clocks = <&bpmp TEGRA234_CLK_PEX2_C10_CORE>; + clock-names = "core"; + + resets = <&bpmp TEGRA234_RESET_PEX2_CORE_10_APB>, + <&bpmp TEGRA234_RESET_PEX2_CORE_10>; + reset-names = "apb", "core"; + + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ + interrupt-names = "intr"; + + nvidia,bpmp = <&bpmp 10>; + + nvidia,enable-ext-refclk; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE10AR &emc>, + <&mc TEGRA234_MEMORY_CLIENT_PCIE10AW &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu_niso1 TEGRA234_SID_PCIE10 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; + + status = "disabled"; + }; + sram@40000000 { compatible = "nvidia,tegra234-sysram", "mmio-sram"; reg = <0x0 0x40000000 0x0 0x80000>; diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 1d86a33de528..d7669a7cee9f 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -15,6 +15,9 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8910.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a3u-eur.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a5u-eur.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-e5.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-e7.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-grandmax.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-j5.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-serranove.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb @@ -101,8 +104,11 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-crd.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-evoker-r0.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-herobrine-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r0.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r1.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r1-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp2.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-crd-r3.dtb @@ -152,3 +158,4 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8350-sony-xperia-sagami-pdx214.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-sony-xperia-sagami-pdx215.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8450-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8450-qrd.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx223.dtb diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts index c1cb1ba5173c..5cdc7ac1a9c0 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts @@ -14,6 +14,7 @@ #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/sound/qcom,q6afe.h> #include <dt-bindings/sound/qcom,q6asm.h> +#include <dt-bindings/sound/qcom,wcd9335.h> /* * GPIO name legend: proper name = the GPIO line is used as GPIO @@ -502,20 +503,20 @@ &pcie0 { status = "okay"; - perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>; + perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; vddpe-3v3-supply = <&wlan_en>; vdda-supply = <&vreg_l28a_0p925>; }; &pcie1 { status = "okay"; - perst-gpio = <&tlmm 130 GPIO_ACTIVE_LOW>; + perst-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>; vdda-supply = <&vreg_l28a_0p925>; }; &pcie2 { status = "okay"; - perst-gpio = <&tlmm 114 GPIO_ACTIVE_LOW>; + perst-gpios = <&tlmm 114 GPIO_ACTIVE_LOW>; vdda-supply = <&vreg_l28a_0p925>; }; @@ -1064,7 +1065,7 @@ }; codec { - sound-dai = <&wcd9335 6>; + sound-dai = <&wcd9335 AIF4_PB>; }; }; @@ -1079,7 +1080,7 @@ }; codec { - sound-dai = <&wcd9335 1>; + sound-dai = <&wcd9335 AIF1_CAP>; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts index 567b33106556..92f264891d84 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts +++ b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts @@ -368,7 +368,7 @@ bus-width = <4>; - cd-gpios = <&tlmm 38 0x1>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; vmmc-supply = <&vreg_l21a_2p95>; vqmmc-supply = <&vreg_l13a_2p95>; diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi index aaad7d9059f6..a7c7ca980a71 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -129,12 +129,6 @@ }; }; - tcsr_mutex: hwlock { - compatible = "qcom,tcsr-mutex"; - syscon = <&tcsr_mutex_regs 0 0x80>; - #hwlock-cells = <1>; - }; - pmuv8: pmu { compatible = "arm,cortex-a53-pmu"; interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | @@ -252,13 +246,14 @@ #reset-cells = <1>; }; - tcsr_mutex_regs: syscon@1905000 { - compatible = "syscon"; - reg = <0x0 0x01905000 0x0 0x8000>; + tcsr_mutex: hwlock@1905000 { + compatible = "qcom,ipq6018-tcsr-mutex", "qcom,tcsr-mutex"; + reg = <0x0 0x01905000 0x0 0x1000>; + #hwlock-cells = <1>; }; tcsr: syscon@1937000 { - compatible = "syscon"; + compatible = "qcom,tcsr-ipq6018", "syscon"; reg = <0x0 0x01937000 0x0 0x21000>; }; diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts index 81dc3a0bcd7d..7143c936de61 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts @@ -51,12 +51,12 @@ &pcie0 { status = "okay"; - perst-gpio = <&tlmm 61 0x1>; + perst-gpios = <&tlmm 61 0x1>; }; &pcie1 { status = "okay"; - perst-gpio = <&tlmm 58 0x1>; + perst-gpios = <&tlmm 58 0x1>; }; &pcie_phy0 { diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi index 40415d988e4a..db4b87944cdf 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi @@ -39,12 +39,12 @@ &pcie0 { status = "ok"; - perst-gpio = <&tlmm 58 0x1>; + perst-gpios = <&tlmm 58 0x1>; }; &pcie1 { status = "ok"; - perst-gpio = <&tlmm 61 0x1>; + perst-gpios = <&tlmm 61 0x1>; }; &pcie_phy0 { diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index d53675fc1595..a47acf9bdf24 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -199,7 +199,7 @@ pcie_qmp0: phy@86000 { compatible = "qcom,ipq8074-qmp-pcie-phy"; - reg = <0x00086000 0x1000>; + reg = <0x00086000 0x1c4>; #address-cells = <1>; #size-cells = <1>; ranges; @@ -227,7 +227,7 @@ pcie_qmp1: phy@8e000 { compatible = "qcom,ipq8074-qmp-pcie-phy"; - reg = <0x0008e000 0x1000>; + reg = <0x0008e000 0x1c4>; #address-cells = <1>; #size-cells = <1>; ranges; @@ -383,7 +383,7 @@ sdhc_1: mmc@7824900 { compatible = "qcom,sdhci-msm-v4"; reg = <0x7824900 0x500>, <0x7824000 0x800>; - reg-names = "hc_mem", "core_mem"; + reg-names = "hc", "core"; interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi index 10f6509a8709..3255bd3fcb55 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi @@ -61,9 +61,9 @@ }; }; - reg_vdd_tsp: regulator-vdd-tsp { + reg_vdd_tsp_a: regulator-vdd-tsp-a { compatible = "regulator-fixed"; - regulator-name = "vdd_tsp"; + regulator-name = "vdd_tsp_a"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts index bc198a2eea25..6db5f78ca286 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts @@ -73,8 +73,8 @@ touchscreen-size-x = <540>; touchscreen-size-y = <960>; - vdd-supply = <®_vdd_tsp>; - vddo-supply = <&pm8916_l6>; + vcca-supply = <®_vdd_tsp_a>; + vdd-supply = <&pm8916_l6>; pinctrl-names = "default"; pinctrl-0 = <&ts_int_default>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts index 7f2ab1891d91..5fb8ecd0c9ca 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts @@ -42,7 +42,7 @@ touchscreen-size-x = <720>; touchscreen-size-y = <1280>; - avdd-supply = <®_vdd_tsp>; + avdd-supply = <®_vdd_tsp_a>; vdd-supply = <&pm8916_l6>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi new file mode 100644 index 000000000000..542010fdfb8a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi @@ -0,0 +1,85 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include "msm8916-samsung-a2015-common.dtsi" + +/ { + haptic { + compatible = "regulator-haptic"; + haptic-supply = <®_motor_vdd>; + min-microvolt = <3300000>; + max-microvolt = <3300000>; + }; + + i2c-muic { + /* SM5504 MUIC instead of SM5502 */ + /delete-node/ extcon@25; + + muic: extcon@14 { + compatible = "siliconmitus,sm5504-muic"; + reg = <0x14>; + + interrupt-parent = <&msmgpio>; + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&muic_int_default>; + }; + }; + + reg_motor_vdd: regulator-motor-vdd { + compatible = "regulator-fixed"; + regulator-name = "motor_vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&msmgpio 76 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&motor_en_default>; + }; + + reg_touch_key: regulator-touch-key { + compatible = "regulator-fixed"; + regulator-name = "touch_key"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&msmgpio 97 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&tkey_en_default>; + }; +}; + +&blsp_i2c2 { + /* lis2hh12 accelerometer instead of BMC150 */ + status = "disabled"; + + /delete-node/ accelerometer@10; + /delete-node/ magnetometer@12; +}; + +&touchkey { + vcc-supply = <®_touch_key>; + vdd-supply = <®_touch_key>; +}; + +&msmgpio { + motor_en_default: motor-en-default { + pins = "gpio76"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + tkey_en_default: tkey-en-default { + pins = "gpio97"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-e5.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-e5.dts new file mode 100644 index 000000000000..777eb934eb4b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-e5.dts @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-samsung-e2015-common.dtsi" + +/* + * NOTE: The original firmware from Samsung can only boot ARM32 kernels on some + * variants. + * Unfortunately, the firmware is signed and cannot be replaced easily. + * There seems to be no way to boot ARM64 kernels on 32-bit devices at the + * moment, even though the hardware would support it. + * + * However, it is possible to use this device tree by compiling an ARM32 kernel + * instead. For clarity and build testing this device tree is maintained next + * to the other MSM8916 device trees. However, it is actually used through + * arch/arm/boot/dts/qcom-msm8916-samsung-e5.dts + */ + +/ { + model = "Samsung Galaxy E5"; + compatible = "samsung,e5", "qcom,msm8916"; + chassis-type = "handset"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-e7.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-e7.dts new file mode 100644 index 000000000000..b412b61ca258 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-e7.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-samsung-e2015-common.dtsi" + +/* + * NOTE: The original firmware from Samsung can only boot ARM32 kernels on some + * variants. + * Unfortunately, the firmware is signed and cannot be replaced easily. + * There seems to be no way to boot ARM64 kernels on 32-bit devices at the + * moment, even though the hardware would support it. + * + * However, it is possible to use this device tree by compiling an ARM32 kernel + * instead. For clarity and build testing this device tree is maintained next + * to the other MSM8916 device trees. However, it is actually used through + * arch/arm/boot/dts/qcom-msm8916-samsung-e7.dts + */ + +/ { + model = "Samsung Galaxy E7"; + compatible = "samsung,e7", "qcom,msm8916"; + chassis-type = "handset"; +}; + +&pm8916_l17 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts new file mode 100644 index 000000000000..bc7134698978 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts @@ -0,0 +1,60 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-samsung-e2015-common.dtsi" +#include <dt-bindings/leds/common.h> + +/* + * NOTE: The original firmware from Samsung can only boot ARM32 kernels on some + * variants. + * Unfortunately, the firmware is signed and cannot be replaced easily. + * There seems to be no way to boot ARM64 kernels on 32-bit devices at the + * moment, even though the hardware would support it. + * + * However, it is possible to use this device tree by compiling an ARM32 kernel + * instead. For clarity and build testing this device tree is maintained next + * to the other MSM8916 device trees. However, it is actually used through + * arch/arm/boot/dts/qcom-msm8916-samsung-grandmax.dts + */ + +/ { + model = "Samsung Galaxy Grand Max"; + compatible = "samsung,grandmax", "qcom,msm8916"; + chassis-type = "handset"; + + /delete-node/ gpio-hall-sensor; + /delete-node/ i2c-nfc; + /delete-node/ i2c-tkey; + + gpio-leds { + compatible = "gpio-leds"; + keyled { + gpios = <&msmgpio 60 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_leds_default>; + }; + }; +}; + +®_motor_vdd { + gpio = <&msmgpio 72 GPIO_ACTIVE_HIGH>; +}; + +®_touch_key { + status = "disabled"; +}; + +&msmgpio { + gpio_leds_default: gpio-led-default { + pins = "gpio60"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; +}; + +&motor_en_default { + pins = "gpio72"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts index 439e89cf7878..bbd6bb3f4fd7 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts @@ -210,6 +210,15 @@ pinctrl-names = "default"; pinctrl-0 = <&imu_irq_default>; }; + + magnetometer@2e { + compatible = "yamaha,yas537"; + reg = <0x2e>; + + mount-matrix = "0", "1", "0", + "1", "0", "0", + "0", "0", "-1"; + }; }; &blsp_i2c4 { diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 48bc2e09128d..a831064700ee 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -936,6 +936,20 @@ #reset-cells = <1>; #power-domain-cells = <1>; reg = <0x01800000 0x80000>; + clocks = <&xo_board>, + <&sleep_clk>, + <&dsi_phy0 1>, + <&dsi_phy0 0>, + <0>, + <0>, + <0>; + clock-names = "xo", + "sleep_clk", + "dsi0pll", + "dsi0pllbyte", + "ext_mclk", + "ext_pri_i2s", + "ext_sec_i2s"; }; tcsr_mutex: hwlock@1905000 { @@ -1469,7 +1483,7 @@ sdhc_1: mmc@7824000 { compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"; reg = <0x07824900 0x11c>, <0x07824000 0x800>; - reg-names = "hc_mem", "core_mem"; + reg-names = "hc", "core"; interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; @@ -1487,7 +1501,7 @@ sdhc_2: mmc@7864000 { compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"; reg = <0x07864900 0x11c>, <0x07864000 0x800>; - reg-names = "hc_mem", "core_mem"; + reg-names = "hc", "core"; interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi index 8416a45ca4fd..6b992a6d56c1 100644 --- a/arch/arm64/boot/dts/qcom/msm8953.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi @@ -722,7 +722,7 @@ }; tcsr_phy_clk_scheme_sel: syscon@193f044 { - compatible = "syscon"; + compatible = "qcom,tcsr-msm8953", "syscon"; reg = <0x193f044 0x4>; }; @@ -799,7 +799,7 @@ compatible = "qcom,msm8953-sdhci", "qcom,sdhci-msm-v4"; reg = <0x7824900 0x500>, <0x7824000 0x800>; - reg-names = "hc_mem", "core_mem"; + reg-names = "hc", "core"; interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; @@ -859,7 +859,7 @@ compatible = "qcom,msm8953-sdhci", "qcom,sdhci-msm-v4"; reg = <0x7864900 0x500>, <0x7864000 0x800>; - reg-names = "hc_mem", "core_mem"; + reg-names = "hc", "core"; interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts index cbe11c060df9..c4e87d0aec42 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts +++ b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts @@ -17,7 +17,7 @@ chassis-type = "handset"; /* required for bootloader to select correct board */ - qcom,msm-id = <251 0 252 0>; + qcom,msm-id = <251 0>, <252 0>; qcom,pmic-id = <65545 65546 0 0>; qcom,board-id = <12 0>; diff --git a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi index 61ec905025b0..f9d8bd09e074 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi @@ -499,7 +499,7 @@ linux,code = <KEY_POWER>; }; - volwnkey { + resin { compatible = "qcom,pm8941-resin"; interrupts = <0 8 1 IRQ_TYPE_EDGE_BOTH>; debounce = <15625>; diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi index f430d797196f..ff60b7004d26 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi @@ -471,7 +471,7 @@ &sdhc2 { status = "okay"; - cd-gpios = <&tlmm 100 0>; + cd-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>; vmmc-supply = <&pm8994_l21>; vqmmc-supply = <&pm8994_l13>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi index 8bc6c070e306..ded5b7ceeaf9 100644 --- a/arch/arm64/boot/dts/qcom/msm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/clock/qcom,gcc-msm8994.h> #include <dt-bindings/clock/qcom,mmcc-msm8994.h> #include <dt-bindings/clock/qcom,rpmcc.h> +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/power/qcom-rpmpd.h> / { @@ -164,12 +165,6 @@ reg = <0 0x80000000 0 0>; }; - tcsr_mutex: hwlock { - compatible = "qcom,tcsr-mutex"; - syscon = <&tcsr_mutex_regs 0 0x80>; - #hwlock-cells = <1>; - }; - pmu { compatible = "arm,cortex-a53-pmu"; interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4)| IRQ_TYPE_LEVEL_HIGH)>; @@ -464,7 +459,7 @@ sdhc1: mmc@f9824900 { compatible = "qcom,msm8994-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>; - reg-names = "hc_mem", "core_mem"; + reg-names = "hc", "core"; interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; @@ -487,7 +482,7 @@ sdhc2: mmc@f98a4900 { compatible = "qcom,msm8994-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; - reg-names = "hc_mem", "core_mem"; + reg-names = "hc", "core"; interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; @@ -502,7 +497,7 @@ pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; - cd-gpios = <&tlmm 100 0>; + cd-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>; bus-width = <4>; status = "disabled"; }; @@ -762,9 +757,10 @@ #interrupt-cells = <4>; }; - tcsr_mutex_regs: syscon@fd484000 { - compatible = "syscon"; - reg = <0xfd484000 0x2000>; + tcsr_mutex: hwlock@fd484000 { + compatible = "qcom,msm8994-tcsr-mutex", "qcom,tcsr-mutex"; + reg = <0xfd484000 0x1000>; + #hwlock-cells = <1>; }; tlmm: pinctrl@fd510000 { diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi index e165b5e890a0..ca7c8d2e1d3d 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi @@ -196,8 +196,8 @@ &pcie0 { status = "okay"; - perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 37 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; vddpe-3v3-supply = <&wlan_en>; vdda-supply = <&pm8994_l28>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi index 627649979891..77819186086a 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi @@ -58,6 +58,14 @@ }; }; + irled { + compatible = "pwm-ir-tx"; + pwms = <&pm8994_lpg 1 1000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&irled_default>; + }; + reserved-memory { memory@88800000 { reg = <0x0 0x88800000 0x0 0x1400000>; @@ -297,6 +305,41 @@ linux,code = <KEY_VOLUMEDOWN>; }; +&pm8994_lpg { + status = "okay"; + + qcom,power-source = <1>; +}; + +&pmi8994_lpg { + status = "okay"; + + qcom,power-source = <1>; + + multi-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_BLUE>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@3 { + reg = <3>; + color = <LED_COLOR_ID_RED>; + }; + }; +}; + &slpi_pil { status = "okay"; @@ -608,6 +651,15 @@ }; &pm8994_gpios { + irled_default: irled-default-state { + pins = "gpio5"; + function = PMIC_GPIO_FUNC_FUNC1; + output-low; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; + power-source = <PM8994_GPIO_S4>; + bias-disable; + }; + wlan_en_default: wlan-en-state { pins = "gpio8"; function = PMIC_GPIO_FUNC_NORMAL; diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts index 25f30ec277c1..4e5264f4116a 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts @@ -8,6 +8,7 @@ #include "msm8996-xiaomi-common.dtsi" #include <dt-bindings/sound/qcom,q6afe.h> #include <dt-bindings/sound/qcom,q6asm.h> +#include <dt-bindings/sound/qcom,wcd9335.h> #include <dt-bindings/input/ti-drv260x.h> / { @@ -193,7 +194,7 @@ }; codec { - sound-dai = <&wcd9335 6>; + sound-dai = <&wcd9335 AIF4_PB>; }; }; @@ -208,7 +209,7 @@ }; codec { - sound-dai = <&wcd9335 1>; + sound-dai = <&wcd9335 AIF1_CAP>; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts index 30a9e4bed4af..79be5fb1295b 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts @@ -9,6 +9,7 @@ #include "pmi8996.dtsi" #include <dt-bindings/sound/qcom,q6afe.h> #include <dt-bindings/sound/qcom,q6asm.h> +#include <dt-bindings/sound/qcom,wcd9335.h> / { model = "Xiaomi Mi Note 2"; @@ -116,6 +117,25 @@ "qcom/msm8996/scorpio/modem.mbn"; }; +&pm8994_lpg { + pinctrl-names = "default"; + pinctrl-0 = <&keypad_default>; + + led@3 { + reg = <3>; + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_KBD_BACKLIGHT; + function-enumerator = <1>; + }; + + led@6 { + reg = <6>; + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_KBD_BACKLIGHT; + function-enumerator = <0>; + }; +}; + &q6asmdai { dai@0 { reg = <0>; @@ -171,7 +191,7 @@ }; codec { - sound-dai = <&wcd9335 6>; + sound-dai = <&wcd9335 AIF4_PB>; }; }; @@ -186,7 +206,7 @@ }; codec { - sound-dai = <&wcd9335 1>; + sound-dai = <&wcd9335 AIF1_CAP>; }; }; }; @@ -258,6 +278,15 @@ "PMIC_SLB", /* GPIO_20 */ "UIM_BATT_ALARM", /* GPIO_21 */ "NC"; /* GPIO_22 */ + + keypad_default: keypad-default-state { + pins = "gpio7", "gpio10"; + function = PMIC_GPIO_FUNC_FUNC1; + output-low; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + power-source = <PM8994_GPIO_S4>; + bias-disable; + }; }; &pm8994_mpps { diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 742eac4ce9b3..c0a2baffa49d 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -7,6 +7,7 @@ #include <dt-bindings/clock/qcom,mmcc-msm8996.h> #include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/interconnect/qcom,msm8996.h> +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,apr.h> #include <dt-bindings/thermal/thermal.h> @@ -359,16 +360,10 @@ firmware { scm { compatible = "qcom,scm-msm8996", "qcom,scm"; - qcom,dload-mode = <&tcsr 0x13000>; + qcom,dload-mode = <&tcsr_2 0x13000>; }; }; - tcsr_mutex: hwlock { - compatible = "qcom,tcsr-mutex"; - syscon = <&tcsr_mutex_regs 0 0x1000>; - #hwlock-cells = <1>; - }; - memory@80000000 { device_type = "memory"; /* We expect the bootloader to fill in the reg */ @@ -838,12 +833,18 @@ <&rpmcc RPM_SMD_PCNOC_A_CLK>; }; - tcsr_mutex_regs: syscon@740000 { - compatible = "syscon"; - reg = <0x00740000 0x40000>; + tcsr_mutex: hwlock@740000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x00740000 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr_1: syscon@760000 { + compatible = "qcom,tcsr-msm8996", "syscon"; + reg = <0x00760000 0x20000>; }; - tcsr: syscon@7a0000 { + tcsr_2: syscon@7a0000 { compatible = "qcom,tcsr-msm8996", "syscon"; reg = <0x007a0000 0x18000>; }; @@ -1161,9 +1162,13 @@ "hdmi_phy"; clocks = <&mmcc MDSS_AHB_CLK>, - <&gcc GCC_HDMI_CLKREF_CLK>; + <&gcc GCC_HDMI_CLKREF_CLK>, + <&xo_board>; clock-names = "iface", - "ref"; + "ref", + "xo"; + + #clock-cells = <0>; status = "disabled"; }; @@ -2413,7 +2418,7 @@ qcom,smem-states = <&mpss_smp2p_out 0>; qcom,smem-state-names = "stop"; - qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>; + qcom,halt-regs = <&tcsr_1 0x3000 0x5000 0x4000>; status = "disabled"; @@ -3018,7 +3023,7 @@ sdhc1: mmc@7464900 { compatible = "qcom,msm8996-sdhci", "qcom,sdhci-msm-v4"; reg = <0x07464900 0x11c>, <0x07464000 0x800>; - reg-names = "hc_mem", "core_mem"; + reg-names = "hc", "core"; interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; @@ -3042,7 +3047,7 @@ sdhc2: mmc@74a4900 { compatible = "qcom,msm8996-sdhci", "qcom,sdhci-msm-v4"; reg = <0x074a4900 0x314>, <0x074a4000 0x800>; - reg-names = "hc_mem", "core_mem"; + reg-names = "hc", "core"; interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; @@ -3337,7 +3342,7 @@ interrupt-names = "intr1", "intr2"; interrupt-controller; #interrupt-cells = <1>; - reset-gpios = <&tlmm 64 0>; + reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; slim-ifc-dev = <&tasha_ifd>; @@ -3499,7 +3504,7 @@ }; saw3: syscon@9a10000 { - compatible = "syscon"; + compatible = "qcom,tcsr-msm8996", "syscon"; reg = <0x09a10000 0x1000>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index 02d21bff2198..f05f16ac5cc1 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -308,12 +308,6 @@ }; }; - tcsr_mutex: hwlock { - compatible = "qcom,tcsr-mutex"; - syscon = <&tcsr_mutex_regs 0 0x1000>; - #hwlock-cells = <1>; - }; - psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -1047,9 +1041,15 @@ }; }; - tcsr_mutex_regs: syscon@1f40000 { - compatible = "syscon"; - reg = <0x01f40000 0x40000>; + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x01f40000 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr_regs_1: syscon@1f60000 { + compatible = "qcom,msm8998-tcsr", "syscon"; + reg = <0x01f60000 0x20000>; }; tlmm: pinctrl@3400000 { @@ -1340,7 +1340,7 @@ resets = <&gcc GCC_MSS_RESTART>; reset-names = "mss_restart"; - qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>; + qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>; power-domains = <&rpmpd MSM8998_VDDCX>, <&rpmpd MSM8998_VDDMX>; @@ -2076,9 +2076,9 @@ }; sdhc2: mmc@c0a4900 { - compatible = "qcom,sdhci-msm-v4"; + compatible = "qcom,msm8998-sdhci", "qcom,sdhci-msm-v4"; reg = <0x0c0a4900 0x314>, <0x0c0a4000 0x800>; - reg-names = "hc_mem", "core_mem"; + reg-names = "hc", "core"; interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/qcom/pm6150l.dtsi b/arch/arm64/boot/dts/qcom/pm6150l.dtsi index 7aa2ef90cb6a..f02c223ef448 100644 --- a/arch/arm64/boot/dts/qcom/pm6150l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm6150l.dtsi @@ -20,10 +20,29 @@ #size-cells = <0>; #io-channel-cells = <1>; + adc-chan@0 { + reg = <ADC5_REF_GND>; + qcom,pre-scaling = <1 1>; + label = "ref_gnd"; + }; + + adc-chan@1 { + reg = <ADC5_1P25VREF>; + qcom,pre-scaling = <1 1>; + label = "vref_1p25"; + }; + adc-chan@6 { reg = <ADC5_DIE_TEMP>; + qcom,pre-scaling = <1 1>; label = "die_temp"; }; + + adc-chan@83 { + reg = <ADC5_VPH_PWR>; + qcom,pre-scaling = <1 3>; + label = "vph_pwr"; + }; }; pm6150l_adc_tm: adc-tm@3500 { diff --git a/arch/arm64/boot/dts/qcom/pm660.dtsi b/arch/arm64/boot/dts/qcom/pm660.dtsi index d0eefbb51663..e1622b16c08b 100644 --- a/arch/arm64/boot/dts/qcom/pm660.dtsi +++ b/arch/arm64/boot/dts/qcom/pm660.dtsi @@ -187,7 +187,7 @@ #address-cells = <1>; #size-cells = <0>; - pm660_spmi_regulators: pm660-regulators { + pm660_spmi_regulators: regulators { compatible = "qcom,pm660-regulators"; }; }; diff --git a/arch/arm64/boot/dts/qcom/pm660l.dtsi b/arch/arm64/boot/dts/qcom/pm660l.dtsi index c7945470ffee..8aa0a5078772 100644 --- a/arch/arm64/boot/dts/qcom/pm660l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm660l.dtsi @@ -65,7 +65,7 @@ #address-cells = <1>; #size-cells = <0>; - pm660l_lpg: lpg@b100 { + pm660l_lpg: pwm { compatible = "qcom,pm660l-lpg"; status = "disabled"; @@ -81,7 +81,7 @@ status = "disabled"; }; - pm660l_spmi_regulators: pm660l-regulators { + pm660l_spmi_regulators: regulators { compatible = "qcom,pm660l-regulators"; }; }; diff --git a/arch/arm64/boot/dts/qcom/pm7250b.dtsi b/arch/arm64/boot/dts/qcom/pm7250b.dtsi new file mode 100644 index 000000000000..61f7a6345150 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm7250b.dtsi @@ -0,0 +1,149 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (C) 2022 Luca Weiss <luca.weiss@fairphone.com> + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +/ { + thermal-zones { + pm7250b-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pm7250b_temp>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <145000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus { + pmic@2 { + compatible = "qcom,pm7250b", "qcom,spmi-pmic"; + reg = <0x2 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm7250b_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x2 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + io-channels = <&pm7250b_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pm7250b_adc: adc@3100 { + compatible = "qcom,spmi-adc5"; + reg = <0x3100>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + + adc-chan@0 { + reg = <ADC5_REF_GND>; + qcom,pre-scaling = <1 1>; + label = "ref_gnd"; + }; + + adc-chan@1 { + reg = <ADC5_1P25VREF>; + qcom,pre-scaling = <1 1>; + label = "vref_1p25"; + }; + + adc-chan@2 { + reg = <ADC5_DIE_TEMP>; + qcom,pre-scaling = <1 1>; + label = "die_temp"; + }; + + adc-chan@7 { + reg = <ADC5_USB_IN_I>; + qcom,pre-scaling = <1 1>; + label = "usb_in_i_uv"; + }; + + adc-chan@8 { + reg = <ADC5_USB_IN_V_16>; + qcom,pre-scaling = <1 16>; + label = "usb_in_v_div_16"; + }; + + adc-chan@9 { + reg = <ADC5_CHG_TEMP>; + qcom,pre-scaling = <1 1>; + label = "chg_temp"; + }; + + adc-chan@e { + reg = <ADC5_AMUX_THM2>; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "smb1390_therm"; + }; + + adc-chan@1e { + reg = <ADC5_MID_CHG_DIV6>; + qcom,pre-scaling = <1 6>; + label = "chg_mid"; + }; + + adc-chan@83 { + reg = <ADC5_VPH_PWR>; + qcom,pre-scaling = <1 3>; + label = "vph_pwr"; + }; + + adc-chan@84 { + reg = <ADC5_VBAT_SNS>; + qcom,pre-scaling = <1 3>; + label = "vbat_sns"; + }; + + adc-chan@99 { + reg = <ADC5_SBUx>; + qcom,pre-scaling = <1 3>; + label = "chg_sbux"; + }; + }; + + pm7250b_adc_tm: adc-tm@3500 { + compatible = "qcom,spmi-adc-tm5"; + reg = <0x3500>; + interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + pmic@3 { + compatible = "qcom,pm7250b", "qcom,spmi-pmic"; + reg = <0x3 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi index fd8434215924..574fa95a2871 100644 --- a/arch/arm64/boot/dts/qcom/pm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi @@ -47,7 +47,7 @@ #address-cells = <1>; #size-cells = <0>; - pon: power-on@800 { + pon: pon@800 { compatible = "qcom,pm8998-pon"; reg = <0x0800>; mode-bootloader = <0x2>; diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi index 5d1ec3a6cc3c..cdded791d96e 100644 --- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi @@ -46,7 +46,7 @@ #address-cells = <1>; #size-cells = <0>; - power-on@800 { + pon@800 { compatible = "qcom,pm8916-pon"; reg = <0x0800>; @@ -128,7 +128,7 @@ #address-cells = <1>; #size-cells = <0>; - pm8150b_lpg: lpg { + pm8150b_lpg: pwm { compatible = "qcom,pm8150b-lpg"; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi index c62d023b39a2..135bfb8d629b 100644 --- a/arch/arm64/boot/dts/qcom/pm8150l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi @@ -46,7 +46,7 @@ #address-cells = <1>; #size-cells = <0>; - power-on@800 { + pon@800 { compatible = "qcom,pm8916-pon"; reg = <0x0800>; @@ -116,7 +116,7 @@ #address-cells = <1>; #size-cells = <0>; - pm8150l_lpg: lpg { + pm8150l_lpg: pwm { compatible = "qcom,pm8150l-lpg"; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/pm8350c.dtsi b/arch/arm64/boot/dts/qcom/pm8350c.dtsi index e0bbb67717fe..f28e71487d5c 100644 --- a/arch/arm64/boot/dts/qcom/pm8350c.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8350c.dtsi @@ -30,9 +30,8 @@ #interrupt-cells = <2>; }; - pm8350c_pwm: pwm@e800 { + pm8350c_pwm: pwm { compatible = "qcom,pm8350c-pwm"; - reg = <0xe800>; #pwm-cells = <2>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/qcom/pm8953.dtsi b/arch/arm64/boot/dts/qcom/pm8953.dtsi index 741c538a9cee..a1d36f9ebbd2 100644 --- a/arch/arm64/boot/dts/qcom/pm8953.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8953.dtsi @@ -45,7 +45,7 @@ #thermal-sensor-cells = <0>; }; - pm8953_vadc: vadc@3100 { + pm8953_vadc: adc@3100 { compatible = "qcom,spmi-vadc"; reg = <0x3100>; interrupts = <0x00 0x31 0x00 0x01>; diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi index ab342397fcd8..e92e5ac414d3 100644 --- a/arch/arm64/boot/dts/qcom/pm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi @@ -135,7 +135,7 @@ #address-cells = <1>; #size-cells = <0>; - pm8994_lpg: lpg { + pm8994_lpg: pwm { compatible = "qcom,pm8994-lpg"; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/pmi8994.dtsi b/arch/arm64/boot/dts/qcom/pmi8994.dtsi index 84c44912ec93..542c215dde10 100644 --- a/arch/arm64/boot/dts/qcom/pmi8994.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8994.dtsi @@ -21,7 +21,7 @@ }; pmi8994_mpps: mpps@a000 { - compatible = "qcom,pmi8994-mpp"; + compatible = "qcom,pmi8994-mpp", "qcom,spmi-mpp"; reg = <0xa000>; gpio-controller; gpio-ranges = <&pmi8994_mpps 0 0 4>; @@ -37,7 +37,7 @@ #address-cells = <1>; #size-cells = <0>; - pmi8994_lpg: lpg { + pmi8994_lpg: pwm { compatible = "qcom,pmi8994-lpg"; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi index 6d3d212560c1..3852a012bb0f 100644 --- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi @@ -42,7 +42,7 @@ }; }; - pmi8998_lpg: lpg { + pmi8998_lpg: pwm { compatible = "qcom,pmi8998-lpg"; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/pmk8350.dtsi b/arch/arm64/boot/dts/qcom/pmk8350.dtsi index 0f94c46a1444..a7ec9d11946d 100644 --- a/arch/arm64/boot/dts/qcom/pmk8350.dtsi +++ b/arch/arm64/boot/dts/qcom/pmk8350.dtsi @@ -39,16 +39,13 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "eoc-int-en-set"; #io-channel-cells = <1>; - io-channel-ranges; }; pmk8350_adc_tm: adc-tm@3400 { compatible = "qcom,adc-tm7"; reg = <0x3400>; interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "threshold"; #address-cells = <1>; #size-cells = <0>; #thermal-sensor-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi b/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi index 68e9122363ae..20c5d60c8c2c 100644 --- a/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi +++ b/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi @@ -46,7 +46,7 @@ #address-cells = <1>; #size-cells = <0>; - pon: power-on@800 { + pon: pon@800 { compatible = "qcom,pm8916-pon"; reg = <0x0800>; pwrkey { diff --git a/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi b/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi index c307fc662511..1da4606e8ee6 100644 --- a/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi +++ b/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi @@ -45,7 +45,7 @@ #address-cells = <1>; #size-cells = <0>; - power-on@800 { + pon@800 { compatible = "qcom,pm8916-pon"; reg = <0x0800>; diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi index 1721ebe5759b..1678ef0f8684 100644 --- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi @@ -99,7 +99,7 @@ &pcie { status = "okay"; - perst-gpio = <&tlmm 43 GPIO_ACTIVE_LOW>; + perst-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&perst_state>; diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index 9ab990061522..80f2d05595fa 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -295,12 +295,6 @@ hwlocks = <&tcsr_mutex 3>; }; - tcsr_mutex: hwlock { - compatible = "qcom,tcsr-mutex"; - syscon = <&tcsr_mutex_regs 0 0x1000>; - #hwlock-cells = <1>; - }; - soc: soc@0 { #address-cells = <1>; #size-cells = <1>; @@ -726,13 +720,14 @@ assigned-clock-rates = <19200000>; }; - tcsr_mutex_regs: syscon@1905000 { - compatible = "syscon"; + tcsr_mutex: hwlock@1905000 { + compatible = "qcom,tcsr-mutex"; reg = <0x01905000 0x20000>; + #hwlock-cells = <1>; }; tcsr: syscon@1937000 { - compatible = "syscon"; + compatible = "qcom,qcs404-tcsr", "syscon"; reg = <0x01937000 0x25000>; }; @@ -1297,7 +1292,7 @@ }; pcie: pci@10000000 { - compatible = "qcom,pcie-qcs404", "snps,dw-pcie"; + compatible = "qcom,pcie-qcs404"; reg = <0x10000000 0xf1d>, <0x10000f20 0xa8>, <0x07780000 0x2000>, diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts index ba547ca9fc6b..87ab0e1ecd16 100644 --- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts +++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts @@ -333,9 +333,6 @@ snps,reset-active-low; snps,reset-delays-us = <0 11000 70000>; - snps,ptp-ref-clk-rate = <250000000>; - snps,ptp-req-clk-rate = <96000000>; - snps,mtl-rx-config = <&mtl_rx_setup>; snps,mtl-tx-config = <&mtl_tx_setup>; diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts index 9398f0349944..b608b82dff03 100644 --- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts +++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts @@ -35,7 +35,6 @@ regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1208000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; }; vreg_l5a: ldo5 { @@ -43,7 +42,6 @@ regulator-min-microvolt = <912000>; regulator-max-microvolt = <912000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; }; vreg_l7a: ldo7 { @@ -51,7 +49,6 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; }; vreg_l13a: ldo13 { @@ -59,7 +56,6 @@ regulator-min-microvolt = <3072000>; regulator-max-microvolt = <3072000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; }; }; @@ -72,7 +68,6 @@ regulator-min-microvolt = <912000>; regulator-max-microvolt = <912000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; }; vreg_l2c: ldo2 { @@ -80,7 +75,6 @@ regulator-min-microvolt = <3072000>; regulator-max-microvolt = <3072000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; }; vreg_l3c: ldo3 { @@ -96,7 +90,6 @@ regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1208000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; }; vreg_l6c: ldo6 { @@ -112,7 +105,6 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; }; vreg_l10c: ldo10 { @@ -141,7 +133,6 @@ regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; }; vreg_l7g: ldo7 { @@ -149,7 +140,6 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; }; vreg_l8g: ldo8 { @@ -157,7 +147,6 @@ regulator-min-microvolt = <880000>; regulator-max-microvolt = <880000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; }; }; }; @@ -194,9 +183,10 @@ #size-cells = <0>; pm8450a_gpios: gpio@c000 { - compatible = "qcom,pm8150-gpio"; + compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; + gpio-ranges = <&pm8450a_gpios 0 0 10>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; @@ -210,9 +200,10 @@ #size-cells = <0>; pm8450c_gpios: gpio@c000 { - compatible = "qcom,pm8150-gpio"; + compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; + gpio-ranges = <&pm8450c_gpios 0 0 10>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; @@ -226,9 +217,10 @@ #size-cells = <0>; pm8450e_gpios: gpio@c000 { - compatible = "qcom,pm8150-gpio"; + compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; + gpio-ranges = <&pm8450e_gpios 0 0 10>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; @@ -242,9 +234,10 @@ #size-cells = <0>; pm8450g_gpios: gpio@c000 { - compatible = "qcom,pm8150-gpio"; + compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; + gpio-ranges = <&pm8450g_gpios 0 0 10>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts index 8290d036044a..edfcd47e1a00 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts @@ -24,8 +24,6 @@ }; &pm6150_adc { - status = "disabled"; - /delete-node/ skin-temp-thermistor@4e; /delete-node/ charger-thermistor@4f; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts index bfbf26fd2cd4..d49de65aa960 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts @@ -16,17 +16,6 @@ compatible = "google,lazor-rev0", "qcom,sc7180"; }; -&pp3300_hub { - /* pp3300_l7c is used to power the USB hub */ - /delete-property/regulator-always-on; - /delete-property/regulator-boot-on; -}; - -&pp3300_l7c { - regulator-always-on; - regulator-boot-on; -}; - &sn65dsi86_out { /* * Lane 0 was incorrectly mapped on the cable, but we've now decided @@ -35,3 +24,11 @@ */ lane-polarities = <1 0>; }; + +&usb_hub_2_x { + vdd-supply = <&pp3300_l7c>; +}; + +&usb_hub_3_x { + vdd-supply = <&pp3300_l7c>; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts index d45a59afd7fc..80c7108bc51b 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts @@ -16,13 +16,11 @@ compatible = "google,lazor-rev1", "google,lazor-rev2", "qcom,sc7180"; }; -&pp3300_hub { - /* pp3300_l7c is used to power the USB hub */ - /delete-property/regulator-always-on; - /delete-property/regulator-boot-on; + +&usb_hub_2_x { + vdd-supply = <&pp3300_l7c>; }; -&pp3300_l7c { - regulator-always-on; - regulator-boot-on; +&usb_hub_3_x { + vdd-supply = <&pp3300_l7c>; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi index 2cf7d5212c61..002663d752da 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi @@ -55,8 +55,6 @@ ap_ts_pen_1v8: &i2c4 { }; &pm6150_adc { - status = "disabled"; - /delete-node/ charger-thermistor@4f; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts index 764c451c1a85..767cb7450c0d 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts @@ -14,7 +14,7 @@ / { model = "Google Pazquel (Parade,LTE)"; - compatible = "google,pazquel-sku4", "qcom,sc7180"; + compatible = "google,pazquel-sku6", "google,pazquel-sku4", "qcom,sc7180"; }; &ap_sar_sensor_i2c { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts index 76a130bad60a..8467ff41e6d5 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts @@ -34,13 +34,10 @@ /delete-node/ charger-thermistor@0; }; -&pp3300_hub { - /* pp3300_l7c is used to power the USB hub */ - /delete-property/regulator-always-on; - /delete-property/regulator-boot-on; +&usb_hub_2_x { + vdd-supply = <&pp3300_l7c>; }; -&pp3300_l7c { - regulator-always-on; - regulator-boot-on; +&usb_hub_3_x { + vdd-supply = <&pp3300_l7c>; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts index 59a23d0e9651..bc097d1b1b23 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts @@ -44,17 +44,6 @@ ap_ts_pen_1v8: &i2c4 { compatible = "auo,b116xa01"; }; -&pp3300_hub { - /* pp3300_l7c is used to power the USB hub */ - /delete-property/regulator-always-on; - /delete-property/regulator-boot-on; -}; - -&pp3300_l7c { - regulator-always-on; - regulator-boot-on; -}; - &sdhc_2 { status = "okay"; }; @@ -63,6 +52,14 @@ ap_ts_pen_1v8: &i2c4 { interrupts = <58 IRQ_TYPE_EDGE_FALLING>; }; +&usb_hub_2_x { + vdd-supply = <&pp3300_l7c>; +}; + +&usb_hub_3_x { + vdd-supply = <&pp3300_l7c>; +}; + /* PINCTRL - modifications to sc7180-trogdor.dtsi */ &trackpad_int_1v8_odl { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi index b5f534db135a..eae22e6e97c1 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi @@ -299,7 +299,7 @@ pinctrl-names = "default"; pinctrl-0 = <&en_pp3300_hub>; - regulator-always-on; + /* The BIOS leaves this regulator on */ regulator-boot-on; vin-supply = <&pp3300_a>; @@ -936,6 +936,24 @@ ap_spi_fp: &spi10 { &usb_1_dwc3 { dr_mode = "host"; + #address-cells = <1>; + #size-cells = <0>; + + /* 2.x hub on port 1 */ + usb_hub_2_x: hub@1 { + compatible = "usbbda,5411"; + reg = <1>; + vdd-supply = <&pp3300_hub>; + peer-hub = <&usb_hub_3_x>; + }; + + /* 3.x hub on port 2 */ + usb_hub_3_x: hub@2 { + compatible = "usbbda,411"; + reg = <2>; + vdd-supply = <&pp3300_hub>; + peer-hub = <&usb_hub_2_x>; + }; }; &usb_1_hsphy { diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index b82c335c25af..58976a1ba06b 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -555,12 +555,6 @@ }; }; - tcsr_mutex: hwlock { - compatible = "qcom,tcsr-mutex"; - syscon = <&tcsr_mutex_regs 0 0x1000>; - #hwlock-cells = <1>; - }; - smem { compatible = "qcom,smem"; memory-region = <&smem_mem>; @@ -1462,13 +1456,19 @@ status = "disabled"; }; - tcsr_mutex_regs: syscon@1f40000 { - compatible = "syscon"; - reg = <0 0x01f40000 0 0x40000>; + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0 0x01f40000 0 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr_regs_1: syscon@1f60000 { + compatible = "qcom,sc7180-tcsr", "syscon"; + reg = <0 0x01f60000 0 0x20000>; }; - tcsr_regs: syscon@1fc0000 { - compatible = "syscon"; + tcsr_regs_2: syscon@1fc0000 { + compatible = "qcom,sc7180-tcsr", "syscon"; reg = <0 0x01fc0000 0 0x40000>; }; @@ -1932,8 +1932,8 @@ <&pdc_reset PDC_MODEM_SYNC_RESET>; reset-names = "mss_restart", "pdc_reset"; - qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>; - qcom,spare-regs = <&tcsr_regs 0xb3e4>; + qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>; + qcom,spare-regs = <&tcsr_regs_2 0xb3e4>; status = "disabled"; diff --git a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi index cfe2741456a1..25f31c81b2b7 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi @@ -83,17 +83,6 @@ }; }; -/* Modem setup is different on Chrome setups than typical Qualcomm setup */ -&remoteproc_mpss { - status = "okay"; - compatible = "qcom,sc7280-mss-pil"; - iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>; - interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>; - memory-region = <&mba_mem>, <&mpss_mem>; - firmware-name = "qcom/sc7280-herobrine/modem/mba.mbn", - "qcom/sc7280-herobrine/modem/qdsp6sw.mbn"; -}; - &remoteproc_wpss { status = "okay"; firmware-name = "ath11k/WCN6750/hw1.0/wpss.mdt"; diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts index 344338ad8a01..dddb505e220b 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts @@ -87,6 +87,36 @@ ap_ts_pen_1v8: &i2c13 { pins = "gpio51"; }; +&sound { + audio-routing = + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC1", "MIC BIAS1", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "MIC BIAS1", + "VA DMIC1", "MIC BIAS1", + "VA DMIC2", "MIC BIAS3", + "VA DMIC3", "MIC BIAS3", + "TX SWR_ADC0", "ADC1_OUTPUT", + "TX SWR_ADC1", "ADC2_OUTPUT", + "TX SWR_ADC2", "ADC3_OUTPUT", + "TX SWR_DMIC0", "DMIC1_OUTPUT", + "TX SWR_DMIC1", "DMIC2_OUTPUT", + "TX SWR_DMIC2", "DMIC3_OUTPUT", + "TX SWR_DMIC3", "DMIC4_OUTPUT", + "TX SWR_DMIC4", "DMIC5_OUTPUT", + "TX SWR_DMIC5", "DMIC6_OUTPUT", + "TX SWR_DMIC6", "DMIC7_OUTPUT", + "TX SWR_DMIC7", "DMIC8_OUTPUT"; +}; + +&wcd9385 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&wcd_reset_n>, <&us_euro_hs_sel>; + pinctrl-1 = <&wcd_reset_n_sleep>, <&us_euro_hs_sel>; + us-euro-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>; +}; + &tlmm { tp_int_odl: tp-int-odl { pins = "gpio7"; @@ -105,4 +135,11 @@ ap_ts_pen_1v8: &i2c13 { function = "gpio"; bias-disable; }; + + us_euro_hs_sel: us-euro-hs-sel { + pins = "gpio81"; + function = "gpio"; + bias-pull-down; + drive-strength = <2>; + }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi index 859faaa8b7e0..c72e53aaf997 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi @@ -5,6 +5,161 @@ * Copyright (c) 2022, The Linux Foundation. All rights reserved. */ +/ { + /* BOARD-SPECIFIC TOP LEVEL NODES */ + sound: sound { + compatible = "google,sc7280-herobrine"; + model = "sc7280-wcd938x-max98360a-1mic"; + + audio-routing = + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC1", "MIC BIAS1", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "MIC BIAS1", + "VA DMIC1", "MIC BIAS1", + "VA DMIC2", "MIC BIAS3", + "VA DMIC3", "MIC BIAS3", + "TX SWR_ADC0", "ADC1_OUTPUT", + "TX SWR_ADC1", "ADC2_OUTPUT", + "TX SWR_ADC2", "ADC3_OUTPUT", + "TX SWR_DMIC0", "DMIC1_OUTPUT", + "TX SWR_DMIC1", "DMIC2_OUTPUT", + "TX SWR_DMIC2", "DMIC3_OUTPUT", + "TX SWR_DMIC3", "DMIC4_OUTPUT", + "TX SWR_DMIC4", "DMIC5_OUTPUT", + "TX SWR_DMIC5", "DMIC6_OUTPUT", + "TX SWR_DMIC6", "DMIC7_OUTPUT", + "TX SWR_DMIC7", "DMIC8_OUTPUT"; + + qcom,msm-mbhc-hphl-swh = <1>; + qcom,msm-mbhc-gnd-swh = <1>; + + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <0>; + + dai-link@0 { + link-name = "MAX98360A"; + reg = <0>; + + cpu { + sound-dai = <&lpass_cpu MI2S_SECONDARY>; + }; + + codec { + sound-dai = <&max98360a>; + }; + }; + + dai-link@1 { + link-name = "DisplayPort"; + reg = <1>; + + cpu { + sound-dai = <&lpass_cpu LPASS_DP_RX>; + }; + + codec { + sound-dai = <&mdss_dp>; + }; + }; + + dai-link@2 { + link-name = "WCD9385 Playback"; + reg = <2>; + + cpu { + sound-dai = <&lpass_cpu LPASS_CDC_DMA_RX0>; + }; + + codec { + sound-dai = <&wcd9385 0>, <&swr0 0>, <&lpass_rx_macro 0>; + }; + }; + + dai-link@3 { + link-name = "WCD9385 Capture"; + reg = <3>; + + cpu { + sound-dai = <&lpass_cpu LPASS_CDC_DMA_TX3>; + }; + + codec { + sound-dai = <&wcd9385 1>, <&swr1 0>, <&lpass_tx_macro 0>; + }; + }; + + dai-link@4 { + link-name = "DMIC"; + reg = <4>; + + cpu { + sound-dai = <&lpass_cpu LPASS_CDC_DMA_VA_TX0>; + }; + + codec { + sound-dai = <&lpass_va_macro 0>; + }; + }; + }; +}; + +/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ + +&lpass_cpu { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&mi2s1_data0>, <&mi2s1_sclk>, <&mi2s1_ws>; + + dai-link@1 { + reg = <MI2S_SECONDARY>; + qcom,playback-sd-lines = <0>; + }; + + dai-link@5 { + reg = <LPASS_DP_RX>; + }; + + dai-link@6 { + reg = <LPASS_CDC_DMA_RX0>; + }; + + dai-link@19 { + reg = <LPASS_CDC_DMA_TX3>; + }; + + dai-link@25 { + reg = <LPASS_CDC_DMA_VA_TX0>; + }; +}; + +&lpass_rx_macro { + status = "okay"; +}; + +&lpass_tx_macro { + status = "okay"; +}; + +&lpass_va_macro { + status = "okay"; +}; + +&swr0 { + status = "okay"; +}; + +&swr1 { + status = "okay"; +}; + +&wcd9385 { + status = "okay"; +}; + /* PINCTRL */ &lpass_dmic01_clk { diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts index 7881bbc641a0..f0f26af1e421 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts @@ -9,10 +9,11 @@ #include "sc7280-herobrine.dtsi" #include "sc7280-herobrine-audio-wcd9385.dtsi" +#include "sc7280-herobrine-lte-sku.dtsi" / { model = "Qualcomm Technologies, Inc. sc7280 CRD platform (rev5+)"; - compatible = "google,hoglin", "qcom,sc7280"; + compatible = "google,zoglin", "google,hoglin", "qcom,sc7280"; /* FIXED REGULATORS */ @@ -167,7 +168,7 @@ ap_ts_pen_1v8: &i2c13 { "PMIC_EDP_BL_PWM", ""; - edp_bl_reg_en: edp-bl-reg-en { + edp_bl_reg_en: edp-bl-reg-en-state { pins = "gpio6"; function = "normal"; bias-disable; @@ -371,7 +372,5 @@ ap_ts_pen_1v8: &i2c13 { "", /* 170 */ "MOS_BLE_UART_TX", "MOS_BLE_UART_RX", - "", - "", ""; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dts new file mode 100644 index 000000000000..ccbe50b6249a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dts @@ -0,0 +1,333 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Evoker board device tree source + * + * Copyright 2022 Google LLC. + */ + +/dts-v1/; + +#include "sc7280-herobrine.dtsi" + +/ { + model = "Google Evoker"; + compatible = "google,evoker", "qcom,sc7280"; +}; + +/* + * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES + * + * Sort order matches the order in the parent files (parents before children). + */ + +&pp3300_codec { + status = "okay"; +}; + +/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ + +ap_tp_i2c: &i2c0 { + status = "okay"; + clock-frequency = <400000>; + + trackpad: trackpad@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + pinctrl-names = "default"; + pinctrl-0 = <&tp_int_odl>; + + interrupt-parent = <&tlmm>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + + hid-descr-addr = <0x20>; + vcc-supply = <&pp3300_z1>; + + wakeup-source; + }; +}; + +ts_i2c: &i2c13 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@10 { + compatible = "elan,ekth6915"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_conn>, <&ts_rst_conn>; + + interrupt-parent = <&tlmm>; + interrupts = <55 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>; + + vcc33-supply = <&ts_avdd>; + }; +}; + +&ap_sar_sensor_i2c { + status = "okay"; +}; + +&ap_sar_sensor0 { + status = "okay"; +}; + +&ap_sar_sensor1 { + status = "okay"; +}; + +&mdss_edp { + status = "okay"; +}; + +&mdss_edp_phy { + status = "okay"; +}; + +/* For nvme */ +&pcie1 { + status = "okay"; +}; + +/* For nvme */ +&pcie1_phy { + status = "okay"; +}; + +&pwmleds { + status = "okay"; +}; + +/* For eMMC */ +&sdhc_1 { + status = "okay"; +}; + +/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */ + +&ts_rst_conn { + bias-disable; +}; + +/* PINCTRL - BOARD-SPECIFIC */ + +/* + * Methodology for gpio-line-names: + * - If a pin goes to herobrine board and is named it gets that name. + * - If a pin goes to herobrine board and is not named, it gets no name. + * - If a pin is totally internal to Qcard then it gets Qcard name. + * - If a pin is not hooked up on Qcard, it gets no name. + */ + +&pm8350c_gpios { + gpio-line-names = "FLASH_STROBE_1", /* 1 */ + "AP_SUSPEND", + "PM8008_1_RST_N", + "", + "", + "", + "PMIC_EDP_BL_EN", + "PMIC_EDP_BL_PWM", + ""; +}; + +&tlmm { + gpio-line-names = "AP_TP_I2C_SDA", /* 0 */ + "AP_TP_I2C_SCL", + "SSD_RST_L", + "PE_WAKE_ODL", + "AP_SAR_SDA", + "AP_SAR_SCL", + "PRB_SC_GPIO_6", + "TP_INT_ODL", + "HP_I2C_SDA", + "HP_I2C_SCL", + + "GNSS_L1_EN", /* 10 */ + "GNSS_L5_EN", + "SPI_AP_MOSI", + "SPI_AP_MISO", + "SPI_AP_CLK", + "SPI_AP_CS0_L", + /* + * AP_FLASH_WP is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_OD. + */ + "AP_FLASH_WP", + "", + "AP_EC_INT_L", + "", + + "UF_CAM_RST_L", /* 20 */ + "WF_CAM_RST_L", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "", + "PM8008_IRQ_1", + "HOST2WLAN_SOL", + "WLAN2HOST_SOL", + "MOS_BT_UART_CTS", + "MOS_BT_UART_RFR", + + "MOS_BT_UART_TX", /* 30 */ + "MOS_BT_UART_RX", + "PRB_SC_GPIO_32", + "HUB_RST_L", + "", + "", + "AP_SPI_FP_MISO", + "AP_SPI_FP_MOSI", + "AP_SPI_FP_CLK", + "AP_SPI_FP_CS_L", + + "AP_EC_SPI_MISO", /* 40 */ + "AP_EC_SPI_MOSI", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "LCM_RST_L", + "EARLY_EUD_N", + "", + "DP_HOT_PLUG_DET", + "IO_BRD_MLB_ID0", + "IO_BRD_MLB_ID1", + + "IO_BRD_MLB_ID2", /* 50 */ + "SSD_EN", + "TS_I2C_SDA_CONN", + "TS_I2C_CLK_CONN", + "TS_RST_CONN", + "TS_INT_CONN", + "AP_I2C_TPM_SDA", + "AP_I2C_TPM_SCL", + "PRB_SC_GPIO_58", + "PRB_SC_GPIO_59", + + "EDP_HOT_PLUG_DET_N", /* 60 */ + "FP_TO_AP_IRQ_L", + "", + "AMP_EN", + "CAM0_MCLK_GPIO_64", + "CAM1_MCLK_GPIO_65", + "WF_CAM_MCLK", + "PRB_SC_GPIO_67", + "FPMCU_BOOT0", + "UF_CAM_SDA", + + "UF_CAM_SCL", /* 70 */ + "", + "", + "WF_CAM_SDA", + "WF_CAM_SCL", + "", + "", + "EN_FP_RAILS", + "FP_RST_L", + "PCIE1_CLKREQ_ODL", + + "EN_PP3300_DX_EDP", /* 80 */ + "SC_GPIO_81", + "FORCED_USB_BOOT", + "WCD_RESET_N", + "MOS_WLAN_EN", + "MOS_BT_EN", + "MOS_SW_CTRL", + "MOS_PCIE0_RST", + "MOS_PCIE0_CLKREQ_N", + "MOS_PCIE0_WAKE_N", + + "MOS_LAA_AS_EN", /* 90 */ + "SD_CD_ODL", + "", + "", + "MOS_BT_WLAN_SLIMBUS_CLK", + "MOS_BT_WLAN_SLIMBUS_DAT0", + "HP_MCLK", + "HP_BCLK", + "HP_DOUT", + "HP_DIN", + + "HP_LRCLK", /* 100 */ + "HP_IRQ", + "", + "", + "GSC_AP_INT_ODL", + "EN_PP3300_CODEC", + "AMP_BCLK", + "AMP_DIN", + "AMP_LRCLK", + "UIM1_DATA_GPIO_109", + + "UIM1_CLK_GPIO_110", /* 110 */ + "UIM1_RESET_GPIO_111", + "PRB_SC_GPIO_112", + "UIM0_DATA", + "UIM0_CLK", + "UIM0_RST", + "UIM0_PRESENT_ODL", + "SDM_RFFE0_CLK", + "SDM_RFFE0_DATA", + "WF_CAM_EN", + + "FASTBOOT_SEL_0", /* 120 */ + "SC_GPIO_121", + "FASTBOOT_SEL_1", + "SC_GPIO_123", + "FASTBOOT_SEL_2", + "SM_RFFE4_CLK_GRFC_8", + "SM_RFFE4_DATA_GRFC_9", + "WLAN_COEX_UART1_RX", + "WLAN_COEX_UART1_TX", + "PRB_SC_GPIO_129", + + "LCM_ID0", /* 130 */ + "LCM_ID1", + "", + "SDR_QLINK_REQ", + "SDR_QLINK_EN", + "QLINK0_WMSS_RESET_N", + "SMR526_QLINK1_REQ", + "SMR526_QLINK1_EN", + "SMR526_QLINK1_WMSS_RESET_N", + "PRB_SC_GPIO_139", + + "SAR1_IRQ_ODL", /* 140 */ + "SAR0_IRQ_ODL", + "PRB_SC_GPIO_142", + "", + "WCD_SWR_TX_CLK", + "WCD_SWR_TX_DATA0", + "WCD_SWR_TX_DATA1", + "WCD_SWR_RX_CLK", + "WCD_SWR_RX_DATA0", + "WCD_SWR_RX_DATA1", + + "DMIC01_CLK", /* 150 */ + "DMIC01_DATA", + "DMIC23_CLK", + "DMIC23_DATA", + "", + "", + "EC_IN_RW_ODL", + "HUB_EN", + "WCD_SWR_TX_DATA2", + "", + + "", /* 160 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + + "", /* 170 */ + "MOS_BLE_UART_TX", + "MOS_BLE_UART_RX", + "", + "", + ""; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts index c1647a85a371..c1a671968725 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts @@ -8,6 +8,7 @@ /dts-v1/; #include "sc7280-herobrine.dtsi" +#include "sc7280-herobrine-lte-sku.dtsi" / { model = "Google Herobrine (rev1+)"; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi new file mode 100644 index 000000000000..a92eeccd2b2a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Herobrine dts fragment for LTE SKUs + * + * Copyright 2022 Google LLC. + */ +/* Modem setup is different on Chrome setups than typical Qualcomm setup */ + +&remoteproc_mpss { + compatible = "qcom,sc7280-mss-pil"; + iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>; + interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>; + memory-region = <&mba_mem>, <&mpss_mem>; + firmware-name = "qcom/sc7280-herobrine/modem/mba.mbn", + "qcom/sc7280-herobrine/modem/qdsp6sw.mbn"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts index 2cacafd8faa8..73e24cc55a09 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts @@ -7,327 +7,10 @@ /dts-v1/; -#include "sc7280-herobrine.dtsi" +#include "sc7280-herobrine-villager.dtsi" +#include "sc7280-herobrine-lte-sku.dtsi" / { - model = "Google Villager (rev0+)"; - compatible = "google,villager", "qcom,sc7280"; -}; - -/* - * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES - * - * Sort order matches the order in the parent files (parents before children). - */ - -&pp3300_codec { - status = "okay"; -}; - -/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ - -ap_tp_i2c: &i2c0 { - status = "okay"; - clock-frequency = <400000>; - - trackpad: trackpad@2c { - compatible = "hid-over-i2c"; - reg = <0x2c>; - pinctrl-names = "default"; - pinctrl-0 = <&tp_int_odl>; - - interrupt-parent = <&tlmm>; - interrupts = <7 IRQ_TYPE_EDGE_FALLING>; - - hid-descr-addr = <0x20>; - vcc-supply = <&pp3300_z1>; - - wakeup-source; - }; -}; - -ts_i2c: &i2c13 { - status = "okay"; - clock-frequency = <400000>; - - ap_ts: touchscreen@10 { - compatible = "elan,ekth6915"; - reg = <0x10>; - pinctrl-names = "default"; - pinctrl-0 = <&ts_int_conn>, <&ts_rst_conn>; - - interrupt-parent = <&tlmm>; - interrupts = <55 IRQ_TYPE_LEVEL_LOW>; - - reset-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>; - - vcc33-supply = <&ts_avdd>; - }; -}; - -&ap_sar_sensor_i2c { - status = "okay"; -}; - -&ap_sar_sensor0 { - status = "okay"; -}; - -&ap_sar_sensor1 { - status = "okay"; -}; - -&mdss_edp { - status = "okay"; -}; - -&mdss_edp_phy { - status = "okay"; -}; - -/* For nvme */ -&pcie1 { - status = "okay"; -}; - -/* For nvme */ -&pcie1_phy { - status = "okay"; -}; - -&pwmleds { - status = "okay"; -}; - -/* For eMMC */ -&sdhc_1 { - status = "okay"; -}; - -/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */ - -&ts_rst_conn { - bias-disable; -}; - -/* PINCTRL - BOARD-SPECIFIC */ - -/* - * Methodology for gpio-line-names: - * - If a pin goes to herobrine board and is named it gets that name. - * - If a pin goes to herobrine board and is not named, it gets no name. - * - If a pin is totally internal to Qcard then it gets Qcard name. - * - If a pin is not hooked up on Qcard, it gets no name. - */ - -&pm8350c_gpios { - gpio-line-names = "FLASH_STROBE_1", /* 1 */ - "AP_SUSPEND", - "PM8008_1_RST_N", - "", - "", - "", - "PMIC_EDP_BL_EN", - "PMIC_EDP_BL_PWM", - ""; -}; - -&tlmm { - gpio-line-names = "AP_TP_I2C_SDA", /* 0 */ - "AP_TP_I2C_SCL", - "SSD_RST_L", - "PE_WAKE_ODL", - "AP_SAR_SDA", - "AP_SAR_SCL", - "PRB_SC_GPIO_6", - "TP_INT_ODL", - "HP_I2C_SDA", - "HP_I2C_SCL", - - "GNSS_L1_EN", /* 10 */ - "GNSS_L5_EN", - "SPI_AP_MOSI", - "SPI_AP_MISO", - "SPI_AP_CLK", - "SPI_AP_CS0_L", - /* - * AP_FLASH_WP is crossystem ABI. Schematics - * call it BIOS_FLASH_WP_OD. - */ - "AP_FLASH_WP", - "", - "AP_EC_INT_L", - "", - - "UF_CAM_RST_L", /* 20 */ - "WF_CAM_RST_L", - "UART_AP_TX_DBG_RX", - "UART_DBG_TX_AP_RX", - "", - "PM8008_IRQ_1", - "HOST2WLAN_SOL", - "WLAN2HOST_SOL", - "MOS_BT_UART_CTS", - "MOS_BT_UART_RFR", - - "MOS_BT_UART_TX", /* 30 */ - "MOS_BT_UART_RX", - "PRB_SC_GPIO_32", - "HUB_RST_L", - "", - "", - "AP_SPI_FP_MISO", - "AP_SPI_FP_MOSI", - "AP_SPI_FP_CLK", - "AP_SPI_FP_CS_L", - - "AP_EC_SPI_MISO", /* 40 */ - "AP_EC_SPI_MOSI", - "AP_EC_SPI_CLK", - "AP_EC_SPI_CS_L", - "LCM_RST_L", - "EARLY_EUD_N", - "", - "DP_HOT_PLUG_DET", - "IO_BRD_MLB_ID0", - "IO_BRD_MLB_ID1", - - "IO_BRD_MLB_ID2", /* 50 */ - "SSD_EN", - "TS_I2C_SDA_CONN", - "TS_I2C_CLK_CONN", - "TS_RST_CONN", - "TS_INT_CONN", - "AP_I2C_TPM_SDA", - "AP_I2C_TPM_SCL", - "PRB_SC_GPIO_58", - "PRB_SC_GPIO_59", - - "EDP_HOT_PLUG_DET_N", /* 60 */ - "FP_TO_AP_IRQ_L", - "", - "AMP_EN", - "CAM0_MCLK_GPIO_64", - "CAM1_MCLK_GPIO_65", - "WF_CAM_MCLK", - "PRB_SC_GPIO_67", - "FPMCU_BOOT0", - "UF_CAM_SDA", - - "UF_CAM_SCL", /* 70 */ - "", - "", - "WF_CAM_SDA", - "WF_CAM_SCL", - "", - "", - "EN_FP_RAILS", - "FP_RST_L", - "PCIE1_CLKREQ_ODL", - - "EN_PP3300_DX_EDP", /* 80 */ - "SC_GPIO_81", - "FORCED_USB_BOOT", - "WCD_RESET_N", - "MOS_WLAN_EN", - "MOS_BT_EN", - "MOS_SW_CTRL", - "MOS_PCIE0_RST", - "MOS_PCIE0_CLKREQ_N", - "MOS_PCIE0_WAKE_N", - - "MOS_LAA_AS_EN", /* 90 */ - "SD_CD_ODL", - "", - "", - "MOS_BT_WLAN_SLIMBUS_CLK", - "MOS_BT_WLAN_SLIMBUS_DAT0", - "HP_MCLK", - "HP_BCLK", - "HP_DOUT", - "HP_DIN", - - "HP_LRCLK", /* 100 */ - "HP_IRQ", - "", - "", - "GSC_AP_INT_ODL", - "EN_PP3300_CODEC", - "AMP_BCLK", - "AMP_DIN", - "AMP_LRCLK", - "UIM1_DATA_GPIO_109", - - "UIM1_CLK_GPIO_110", /* 110 */ - "UIM1_RESET_GPIO_111", - "PRB_SC_GPIO_112", - "UIM0_DATA", - "UIM0_CLK", - "UIM0_RST", - "UIM0_PRESENT_ODL", - "SDM_RFFE0_CLK", - "SDM_RFFE0_DATA", - "WF_CAM_EN", - - "FASTBOOT_SEL_0", /* 120 */ - "SC_GPIO_121", - "FASTBOOT_SEL_1", - "SC_GPIO_123", - "FASTBOOT_SEL_2", - "SM_RFFE4_CLK_GRFC_8", - "SM_RFFE4_DATA_GRFC_9", - "WLAN_COEX_UART1_RX", - "WLAN_COEX_UART1_TX", - "PRB_SC_GPIO_129", - - "LCM_ID0", /* 130 */ - "LCM_ID1", - "", - "SDR_QLINK_REQ", - "SDR_QLINK_EN", - "QLINK0_WMSS_RESET_N", - "SMR526_QLINK1_REQ", - "SMR526_QLINK1_EN", - "SMR526_QLINK1_WMSS_RESET_N", - "PRB_SC_GPIO_139", - - "SAR1_IRQ_ODL", /* 140 */ - "SAR0_IRQ_ODL", - "PRB_SC_GPIO_142", - "", - "WCD_SWR_TX_CLK", - "WCD_SWR_TX_DATA0", - "WCD_SWR_TX_DATA1", - "WCD_SWR_RX_CLK", - "WCD_SWR_RX_DATA0", - "WCD_SWR_RX_DATA1", - - "DMIC01_CLK", /* 150 */ - "DMIC01_DATA", - "DMIC23_CLK", - "DMIC23_DATA", - "", - "", - "EC_IN_RW_ODL", - "HUB_EN", - "WCD_SWR_TX_DATA2", - "", - - "", /* 160 */ - "", - "", - "", - "", - "", - "", - "", - "", - "", - - "", /* 170 */ - "MOS_BLE_UART_TX", - "MOS_BLE_UART_RX", - "", - "", - ""; + model = "Google Villager (rev0)"; + compatible = "google,villager-rev0", "qcom,sc7280"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts new file mode 100644 index 000000000000..f1017809e5da --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Villager board device tree source + * + * Copyright 2022 Google LLC. + */ + +#include "sc7280-herobrine-villager-r1.dts" +#include "sc7280-herobrine-lte-sku.dtsi" + +/ { + model = "Google Villager (rev1+) with LTE"; + compatible = "google,villager-sku512", "qcom,sc7280"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts new file mode 100644 index 000000000000..cfc648726930 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts @@ -0,0 +1,43 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Villager board device tree source + * + * Copyright 2022 Google LLC. + */ + +/dts-v1/; + +#include "sc7280-herobrine-villager.dtsi" +#include "sc7280-herobrine-audio-wcd9385.dtsi" + +/ { + model = "Google Villager (rev1+)"; + compatible = "google,villager", "qcom,sc7280"; +}; + +&lpass_va_macro { + vdd-micb-supply = <&pp1800_l2c>; +}; + +&sound { + audio-routing = + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC1", "MIC BIAS1", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "vdd-micb", + "VA DMIC1", "vdd-micb", + "VA DMIC2", "vdd-micb", + "VA DMIC3", "vdd-micb", + "TX SWR_ADC0", "ADC1_OUTPUT", + "TX SWR_ADC1", "ADC2_OUTPUT", + "TX SWR_ADC2", "ADC3_OUTPUT", + "TX SWR_DMIC0", "DMIC1_OUTPUT", + "TX SWR_DMIC1", "DMIC2_OUTPUT", + "TX SWR_DMIC2", "DMIC3_OUTPUT", + "TX SWR_DMIC3", "DMIC4_OUTPUT", + "TX SWR_DMIC4", "DMIC5_OUTPUT", + "TX SWR_DMIC5", "DMIC6_OUTPUT", + "TX SWR_DMIC6", "DMIC7_OUTPUT", + "TX SWR_DMIC7", "DMIC8_OUTPUT"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi new file mode 100644 index 000000000000..4566722bf4dd --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi @@ -0,0 +1,326 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Villager board device tree source + * + * Copyright 2022 Google LLC. + */ + +#include "sc7280-herobrine.dtsi" + +/* + * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES + * + * Sort order matches the order in the parent files (parents before children). + */ + +&pp3300_codec { + status = "okay"; +}; + +/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ + +ap_tp_i2c: &i2c0 { + status = "okay"; + clock-frequency = <400000>; + + trackpad: trackpad@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + pinctrl-names = "default"; + pinctrl-0 = <&tp_int_odl>; + + interrupt-parent = <&tlmm>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + + hid-descr-addr = <0x20>; + vcc-supply = <&pp3300_z1>; + + wakeup-source; + }; +}; + +ts_i2c: &i2c13 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@10 { + compatible = "elan,ekth6915"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_conn>, <&ts_rst_conn>; + + interrupt-parent = <&tlmm>; + interrupts = <55 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>; + + vcc33-supply = <&ts_avdd>; + }; +}; + +&ap_sar_sensor_i2c { + status = "okay"; +}; + +&ap_sar_sensor0 { + status = "okay"; +}; + +&ap_sar_sensor1 { + status = "okay"; +}; + +&mdss_edp { + status = "okay"; +}; + +&mdss_edp_phy { + status = "okay"; +}; + +/* For nvme */ +&pcie1 { + status = "okay"; +}; + +/* For nvme */ +&pcie1_phy { + status = "okay"; +}; + +&pwmleds { + status = "okay"; +}; + +/* For eMMC */ +&sdhc_1 { + status = "okay"; +}; + +/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */ + +&ts_rst_conn { + bias-disable; +}; + +/* PINCTRL - BOARD-SPECIFIC */ + +/* + * Methodology for gpio-line-names: + * - If a pin goes to herobrine board and is named it gets that name. + * - If a pin goes to herobrine board and is not named, it gets no name. + * - If a pin is totally internal to Qcard then it gets Qcard name. + * - If a pin is not hooked up on Qcard, it gets no name. + */ + +&pm8350c_gpios { + gpio-line-names = "FLASH_STROBE_1", /* 1 */ + "AP_SUSPEND", + "PM8008_1_RST_N", + "", + "", + "", + "PMIC_EDP_BL_EN", + "PMIC_EDP_BL_PWM", + ""; +}; + +&tlmm { + gpio-line-names = "AP_TP_I2C_SDA", /* 0 */ + "AP_TP_I2C_SCL", + "SSD_RST_L", + "PE_WAKE_ODL", + "AP_SAR_SDA", + "AP_SAR_SCL", + "PRB_SC_GPIO_6", + "TP_INT_ODL", + "HP_I2C_SDA", + "HP_I2C_SCL", + + "GNSS_L1_EN", /* 10 */ + "GNSS_L5_EN", + "SPI_AP_MOSI", + "SPI_AP_MISO", + "SPI_AP_CLK", + "SPI_AP_CS0_L", + /* + * AP_FLASH_WP is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_OD. + */ + "AP_FLASH_WP", + "", + "AP_EC_INT_L", + "", + + "UF_CAM_RST_L", /* 20 */ + "WF_CAM_RST_L", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "", + "PM8008_IRQ_1", + "HOST2WLAN_SOL", + "WLAN2HOST_SOL", + "MOS_BT_UART_CTS", + "MOS_BT_UART_RFR", + + "MOS_BT_UART_TX", /* 30 */ + "MOS_BT_UART_RX", + "PRB_SC_GPIO_32", + "HUB_RST_L", + "", + "", + "AP_SPI_FP_MISO", + "AP_SPI_FP_MOSI", + "AP_SPI_FP_CLK", + "AP_SPI_FP_CS_L", + + "AP_EC_SPI_MISO", /* 40 */ + "AP_EC_SPI_MOSI", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "LCM_RST_L", + "EARLY_EUD_N", + "", + "DP_HOT_PLUG_DET", + "IO_BRD_MLB_ID0", + "IO_BRD_MLB_ID1", + + "IO_BRD_MLB_ID2", /* 50 */ + "SSD_EN", + "TS_I2C_SDA_CONN", + "TS_I2C_CLK_CONN", + "TS_RST_CONN", + "TS_INT_CONN", + "AP_I2C_TPM_SDA", + "AP_I2C_TPM_SCL", + "PRB_SC_GPIO_58", + "PRB_SC_GPIO_59", + + "EDP_HOT_PLUG_DET_N", /* 60 */ + "FP_TO_AP_IRQ_L", + "", + "AMP_EN", + "CAM0_MCLK_GPIO_64", + "CAM1_MCLK_GPIO_65", + "WF_CAM_MCLK", + "PRB_SC_GPIO_67", + "FPMCU_BOOT0", + "UF_CAM_SDA", + + "UF_CAM_SCL", /* 70 */ + "", + "", + "WF_CAM_SDA", + "WF_CAM_SCL", + "", + "", + "EN_FP_RAILS", + "FP_RST_L", + "PCIE1_CLKREQ_ODL", + + "EN_PP3300_DX_EDP", /* 80 */ + "SC_GPIO_81", + "FORCED_USB_BOOT", + "WCD_RESET_N", + "MOS_WLAN_EN", + "MOS_BT_EN", + "MOS_SW_CTRL", + "MOS_PCIE0_RST", + "MOS_PCIE0_CLKREQ_N", + "MOS_PCIE0_WAKE_N", + + "MOS_LAA_AS_EN", /* 90 */ + "SD_CD_ODL", + "", + "", + "MOS_BT_WLAN_SLIMBUS_CLK", + "MOS_BT_WLAN_SLIMBUS_DAT0", + "HP_MCLK", + "HP_BCLK", + "HP_DOUT", + "HP_DIN", + + "HP_LRCLK", /* 100 */ + "HP_IRQ", + "", + "", + "GSC_AP_INT_ODL", + "EN_PP3300_CODEC", + "AMP_BCLK", + "AMP_DIN", + "AMP_LRCLK", + "UIM1_DATA_GPIO_109", + + "UIM1_CLK_GPIO_110", /* 110 */ + "UIM1_RESET_GPIO_111", + "PRB_SC_GPIO_112", + "UIM0_DATA", + "UIM0_CLK", + "UIM0_RST", + "UIM0_PRESENT_ODL", + "SDM_RFFE0_CLK", + "SDM_RFFE0_DATA", + "WF_CAM_EN", + + "FASTBOOT_SEL_0", /* 120 */ + "SC_GPIO_121", + "FASTBOOT_SEL_1", + "SC_GPIO_123", + "FASTBOOT_SEL_2", + "SM_RFFE4_CLK_GRFC_8", + "SM_RFFE4_DATA_GRFC_9", + "WLAN_COEX_UART1_RX", + "WLAN_COEX_UART1_TX", + "PRB_SC_GPIO_129", + + "LCM_ID0", /* 130 */ + "LCM_ID1", + "", + "SDR_QLINK_REQ", + "SDR_QLINK_EN", + "QLINK0_WMSS_RESET_N", + "SMR526_QLINK1_REQ", + "SMR526_QLINK1_EN", + "SMR526_QLINK1_WMSS_RESET_N", + "PRB_SC_GPIO_139", + + "SAR1_IRQ_ODL", /* 140 */ + "SAR0_IRQ_ODL", + "PRB_SC_GPIO_142", + "", + "WCD_SWR_TX_CLK", + "WCD_SWR_TX_DATA0", + "WCD_SWR_TX_DATA1", + "WCD_SWR_RX_CLK", + "WCD_SWR_RX_DATA0", + "WCD_SWR_RX_DATA1", + + "DMIC01_CLK", /* 150 */ + "DMIC01_DATA", + "DMIC23_CLK", + "DMIC23_DATA", + "", + "", + "EC_IN_RW_ODL", + "HUB_EN", + "WCD_SWR_TX_DATA2", + "", + + "", /* 160 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + + "", /* 170 */ + "MOS_BLE_UART_TX", + "MOS_BLE_UART_RX", + "", + "", + ""; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi index 3f8996c00b05..c11e37160f34 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi @@ -144,8 +144,8 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + /* The BIOS leaves this regulator on */ regulator-boot-on; - regulator-always-on; gpio = <&tlmm 157 GPIO_ACTIVE_HIGH>; enable-active-high; @@ -296,6 +296,14 @@ /* BOARD-SPECIFIC TOP LEVEL NODES */ + max98360a: audio-codec-0 { + compatible = "maxim,max98360a"; + pinctrl-names = "default"; + pinctrl-0 = <&_en>; + sdmode-gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>; + #sound-dai-cells = <0>; + }; + pwmleds: pwmleds { compatible = "pwm-leds"; status = "disabled"; @@ -446,7 +454,7 @@ ap_i2c_tpm: &i2c14 { pinctrl-names = "default"; pinctrl-0 = <&pcie1_clkreq_n>, <&ssd_rst_l>, <&pe_wake_odl>; - perst-gpio = <&tlmm 2 GPIO_ACTIVE_LOW>; + perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; vddpe-3v3-supply = <&pp3300_ssd>; }; @@ -596,25 +604,32 @@ ap_ec_spi: &spi10 { &usb_1_dwc3 { dr_mode = "host"; -}; -&usb_1_hsphy { - status = "okay"; -}; + #address-cells = <1>; + #size-cells = <0>; -&usb_1_qmpphy { - status = "okay"; -}; + /* 2.x hub on port 1 */ + usb_hub_2_x: hub@1 { + compatible = "usbbda,5411"; + reg = <1>; + vdd-supply = <&pp3300_hub>; + peer-hub = <&usb_hub_3_x>; + }; -&usb_2 { - status = "okay"; + /* 3.x hub on port 2 */ + usb_hub_3_x: hub@2 { + compatible = "usbbda,411"; + reg = <2>; + vdd-supply = <&pp3300_hub>; + peer-hub = <&usb_hub_2_x>; + }; }; -&usb_2_dwc3 { - dr_mode = "host"; +&usb_1_hsphy { + status = "okay"; }; -&usb_2_hsphy { +&usb_1_qmpphy { status = "okay"; }; @@ -729,27 +744,27 @@ ap_ec_spi: &spi10 { pinctrl-names = "default"; pinctrl-0 = <&bios_flash_wp_od>; - amp_en: amp-en { + amp_en: amp-en-pins { pins = "gpio63"; function = "gpio"; bias-disable; drive-strength = <2>; }; - ap_ec_int_l: ap-ec-int-l { + ap_ec_int_l: ap-ec-int-l-pins { pins = "gpio18"; function = "gpio"; bias-pull-up; }; - bios_flash_wp_od: bios-flash-wp-od { + bios_flash_wp_od: bios-flash-wp-od-pins { pins = "gpio16"; function = "gpio"; /* Has external pull */ bias-disable; }; - en_fp_rails: en-fp-rails { + en_fp_rails: en-fp-rails-pins { pins = "gpio77"; function = "gpio"; bias-disable; @@ -757,60 +772,60 @@ ap_ec_spi: &spi10 { output-high; }; - en_pp3300_codec: en-pp3300-codec { + en_pp3300_codec: en-pp3300-codec-pins { pins = "gpio105"; function = "gpio"; bias-disable; drive-strength = <2>; }; - en_pp3300_dx_edp: en-pp3300-dx-edp { + en_pp3300_dx_edp: en-pp3300-dx-edp-pins { pins = "gpio80"; function = "gpio"; bias-disable; drive-strength = <2>; }; - fp_rst_l: fp-rst-l { + fp_rst_l: fp-rst-l-pins { pins = "gpio78"; function = "gpio"; bias-disable; drive-strength = <2>; }; - fp_to_ap_irq_l: fp-to-ap-irq-l { + fp_to_ap_irq_l: fp-to-ap-irq-l-pins { pins = "gpio61"; function = "gpio"; /* Has external pullup */ bias-disable; }; - fpmcu_boot0: fpmcu-boot0 { + fpmcu_boot0: fpmcu-boot0-pins { pins = "gpio68"; function = "gpio"; bias-disable; }; - gsc_ap_int_odl: gsc-ap-int-odl { + gsc_ap_int_odl: gsc-ap-int-odl-pins { pins = "gpio104"; function = "gpio"; bias-pull-up; }; - hp_irq: hp-irq { + hp_irq: hp-irq-pins { pins = "gpio101"; function = "gpio"; bias-pull-up; }; - hub_en: hub-en { + hub_en: hub-en-pins { pins = "gpio157"; function = "gpio"; bias-disable; drive-strength = <2>; }; - pe_wake_odl: pe-wake-odl { + pe_wake_odl: pe-wake-odl-pins { pins = "gpio3"; function = "gpio"; /* Has external pull */ @@ -819,45 +834,45 @@ ap_ec_spi: &spi10 { }; /* For ap_spi_fp */ - qup_spi9_cs_gpio_init_high: qup-spi9-cs-gpio-init-high { + qup_spi9_cs_gpio_init_high: qup-spi9-cs-gpio-init-high-pins { pins = "gpio39"; function = "gpio"; output-high; }; /* For ap_ec_spi */ - qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high { + qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high-pins { pins = "gpio43"; function = "gpio"; output-high; }; - sar0_irq_odl: sar0-irq-odl { + sar0_irq_odl: sar0-irq-odl-pins { pins = "gpio141"; function = "gpio"; bias-pull-up; }; - sar1_irq_odl: sar1-irq-odl { + sar1_irq_odl: sar1-irq-odl-pins { pins = "gpio140"; function = "gpio"; bias-pull-up; }; - sd_cd_odl: sd-cd-odl { + sd_cd_odl: sd-cd-odl-pins { pins = "gpio91"; function = "gpio"; bias-pull-up; }; - ssd_en: ssd-en { + ssd_en: ssd-en-pins { pins = "gpio51"; function = "gpio"; bias-disable; drive-strength = <2>; }; - ssd_rst_l: ssd-rst-l { + ssd_rst_l: ssd-rst-l-pins { pins = "gpio2"; function = "gpio"; bias-disable; @@ -865,14 +880,14 @@ ap_ec_spi: &spi10 { output-low; }; - tp_int_odl: tp-int-odl { + tp_int_odl: tp-int-odl-pins { pins = "gpio7"; function = "gpio"; /* Has external pullup */ bias-disable; }; - wf_cam_en: wf-cam-en { + wf_cam_en: wf-cam-en-pins { pins = "gpio119"; function = "gpio"; /* Has external pulldown */ diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi index a7c346aa3b02..7f5143e9bb80 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi @@ -79,26 +79,26 @@ ap_h1_spi: &spi14 { }; &tlmm { - ap_ec_int_l: ap-ec-int-l { + ap_ec_int_l: ap-ec-int-l-pins { pins = "gpio18"; function = "gpio"; input-enable; bias-pull-up; }; - h1_ap_int_odl: h1-ap-int-odl { + h1_ap_int_odl: h1-ap-int-odl-pins { pins = "gpio104"; function = "gpio"; input-enable; bias-pull-up; }; - qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high { + qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high-pins { pins = "gpio43"; output-high; }; - qup_spi14_cs_gpio_init_high: qup-spi14-cs-gpio-init-high { + qup_spi14_cs_gpio_init_high: qup-spi14-cs-gpio-init-high-pins { pins = "gpio59"; output-high; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts index 6d3ff80582ae..7559164cdda0 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts @@ -10,6 +10,7 @@ #include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h> #include "sc7280-idp.dtsi" #include "pmr735a.dtsi" +#include "sc7280-herobrine-lte-sku.dtsi" / { model = "Qualcomm Technologies, Inc. sc7280 IDP SKU1 platform"; @@ -78,7 +79,7 @@ }; &pmk8350_vadc { - pmr735a_die_temp { + pmr735a-die-temp@403 { reg = <PMR735A_ADC7_DIE_TEMP>; label = "pmr735a_die_temp"; qcom,pre-scaling = <1 1>; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi index a74e0b730db6..cd432a2856a7 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi @@ -20,6 +20,42 @@ serial1 = &uart7; }; + max98360a: audio-codec-0 { + compatible = "maxim,max98360a"; + pinctrl-names = "default"; + pinctrl-0 = <&_en>; + sdmode-gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>; + #sound-dai-cells = <0>; + }; + + wcd9385: audio-codec-1 { + compatible = "qcom,wcd9385-codec"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&wcd_reset_n>; + pinctrl-1 = <&wcd_reset_n_sleep>; + + reset-gpios = <&tlmm 83 GPIO_ACTIVE_HIGH>; + + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + vdd-rxtx-supply = <&vreg_l18b_1p8>; + vdd-io-supply = <&vreg_l18b_1p8>; + vdd-buck-supply = <&vreg_l17b_1p8>; + vdd-mic-bias-supply = <&vreg_bob>; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 + 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + #sound-dai-cells = <1>; + }; + gpio-keys { compatible = "gpio-keys"; label = "gpio-keys"; @@ -49,6 +85,104 @@ pinctrl-names = "default"; pinctrl-0 = <&nvme_pwren>; }; + + sound: sound { + compatible = "google,sc7280-herobrine"; + model = "sc7280-wcd938x-max98360a-1mic"; + + audio-routing = + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC1", "MIC BIAS1", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "MIC BIAS3", + "VA DMIC1", "MIC BIAS3", + "VA DMIC2", "MIC BIAS1", + "VA DMIC3", "MIC BIAS1", + "TX SWR_ADC0", "ADC1_OUTPUT", + "TX SWR_ADC1", "ADC2_OUTPUT", + "TX SWR_ADC2", "ADC3_OUTPUT", + "TX SWR_DMIC0", "DMIC1_OUTPUT", + "TX SWR_DMIC1", "DMIC2_OUTPUT", + "TX SWR_DMIC2", "DMIC3_OUTPUT", + "TX SWR_DMIC3", "DMIC4_OUTPUT", + "TX SWR_DMIC4", "DMIC5_OUTPUT", + "TX SWR_DMIC5", "DMIC6_OUTPUT", + "TX SWR_DMIC6", "DMIC7_OUTPUT", + "TX SWR_DMIC7", "DMIC8_OUTPUT"; + + qcom,msm-mbhc-hphl-swh = <1>; + qcom,msm-mbhc-gnd-swh = <1>; + + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <0>; + + dai-link@0 { + link-name = "MAX98360A"; + reg = <0>; + + cpu { + sound-dai = <&lpass_cpu MI2S_SECONDARY>; + }; + + codec { + sound-dai = <&max98360a>; + }; + }; + + dai-link@1 { + link-name = "DisplayPort"; + reg = <1>; + + cpu { + sound-dai = <&lpass_cpu LPASS_DP_RX>; + }; + + codec { + sound-dai = <&mdss_dp>; + }; + }; + + dai-link@2 { + link-name = "WCD9385 Playback"; + reg = <2>; + + cpu { + sound-dai = <&lpass_cpu LPASS_CDC_DMA_RX0>; + }; + + codec { + sound-dai = <&wcd9385 0>, <&swr0 0>, <&lpass_rx_macro 0>; + }; + }; + + dai-link@3 { + link-name = "WCD9385 Capture"; + reg = <3>; + + cpu { + sound-dai = <&lpass_cpu LPASS_CDC_DMA_TX3>; + }; + + codec { + sound-dai = <&wcd9385 1>, <&swr1 0>, <&lpass_tx_macro 0>; + }; + }; + + dai-link@4 { + link-name = "DMIC"; + reg = <4>; + + cpu { + sound-dai = <&lpass_cpu LPASS_CDC_DMA_VA_TX0>; + }; + + codec { + sound-dai = <&lpass_va_macro 0>; + }; + }; + }; }; &apps_rsc { @@ -246,9 +380,50 @@ modem-init; }; +&lpass_cpu { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&mi2s1_data0>, <&mi2s1_sclk>, <&mi2s1_ws>; + + dai-link@1 { + reg = <MI2S_SECONDARY>; + qcom,playback-sd-lines = <0>; + }; + + dai-link@5 { + reg = <LPASS_DP_RX>; + }; + + dai-link@6 { + reg = <LPASS_CDC_DMA_RX0>; + }; + + dai-link@19 { + reg = <LPASS_CDC_DMA_TX3>; + }; + + dai-link@25 { + reg = <LPASS_CDC_DMA_VA_TX0>; + }; +}; + +&lpass_rx_macro { + status = "okay"; +}; + +&lpass_tx_macro { + status = "okay"; +}; + +&lpass_va_macro { + status = "okay"; + vdd-micb-supply = <&vreg_bob>; +}; + &pcie1 { status = "okay"; - perst-gpio = <&tlmm 2 GPIO_ACTIVE_LOW>; + perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; vddpe-3v3-supply = <&nvme_3v3_regulator>; @@ -264,7 +439,7 @@ }; &pmk8350_vadc { - pmk8350_die_temp { + pmk8350-die-temp@3 { reg = <PMK8350_ADC7_DIE_TEMP>; label = "pmk8350_die_temp"; qcom,pre-scaling = <1 1>; @@ -306,6 +481,28 @@ cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>; }; +&swr0 { + status = "okay"; + + wcd_rx: codec@0,4 { + compatible = "sdw20217010d00"; + reg = <0 4>; + #sound-dai-cells = <1>; + qcom,rx-port-mapping = <1 2 3 4 5>; + }; +}; + +&swr1 { + status = "okay"; + + wcd_tx: codec@0,3 { + compatible = "sdw20217010d00"; + reg = <0 3>; + #sound-dai-cells = <1>; + qcom,tx-port-mapping = <1 2 3 4>; + }; +}; + &uart5 { compatible = "qcom,geni-debug-uart"; status = "okay"; @@ -550,18 +747,24 @@ }; &tlmm { - bt_en: bt-en { + amp_en: amp-en { + pins = "gpio63"; + bias-pull-down; + drive-strength = <2>; + }; + + bt_en: bt-en-pins { pins = "gpio85"; function = "gpio"; output-low; bias-disable; }; - nvme_pwren: nvme-pwren { + nvme_pwren: nvme-pwren-pins { function = "gpio"; }; - pcie1_reset_n: pcie1-reset-n { + pcie1_reset_n: pcie1-reset-n-pins { pins = "gpio2"; function = "gpio"; @@ -570,7 +773,7 @@ bias-disable; }; - pcie1_wake_n: pcie1-wake-n { + pcie1_wake_n: pcie1-wake-n-pins { pins = "gpio3"; function = "gpio"; @@ -578,7 +781,7 @@ bias-pull-up; }; - qup_uart7_sleep_cts: qup-uart7-sleep-cts { + qup_uart7_sleep_cts: qup-uart7-sleep-cts-pins { pins = "gpio28"; function = "gpio"; /* @@ -591,7 +794,7 @@ bias-bus-hold; }; - qup_uart7_sleep_rts: qup-uart7-sleep-rts { + qup_uart7_sleep_rts: qup-uart7-sleep-rts-pins { pins = "gpio29"; function = "gpio"; /* @@ -603,7 +806,7 @@ bias-pull-down; }; - qup_uart7_sleep_tx: qup-uart7-sleep-tx { + qup_uart7_sleep_tx: qup-uart7-sleep-tx-pins { pins = "gpio30"; function = "gpio"; /* @@ -613,7 +816,7 @@ bias-pull-up; }; - qup_uart7_sleep_rx: qup-uart7-sleep-rx { + qup_uart7_sleep_rx: qup-uart7-sleep-rx-pins { pins = "gpio31"; function = "gpio"; /* @@ -624,15 +827,28 @@ bias-pull-up; }; - sd_cd: sd-cd { + sd_cd: sd-cd-pins { pins = "gpio91"; function = "gpio"; bias-pull-up; }; - sw_ctrl: sw-ctrl { + sw_ctrl: sw-ctrl-pins { pins = "gpio86"; function = "gpio"; bias-pull-down; }; + + wcd_reset_n: wcd-reset-n { + pins = "gpio83"; + function = "gpio"; + drive-strength = <8>; + }; + + wcd_reset_n_sleep: wcd-reset-n-sleep { + pins = "gpio83"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi index 7adf31bb9827..4b8c676b0bb1 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi @@ -28,6 +28,38 @@ bluetooth0 = &bluetooth; serial0 = &uart5; serial1 = &uart7; + wifi0 = &wifi; + }; + + wcd9385: audio-codec-1 { + compatible = "qcom,wcd9385-codec"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&wcd_reset_n>, <&us_euro_hs_sel>; + pinctrl-1 = <&wcd_reset_n_sleep>, <&us_euro_hs_sel>; + + reset-gpios = <&tlmm 83 GPIO_ACTIVE_HIGH>; + us-euro-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>; + + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + vdd-rxtx-supply = <&vreg_l18b_1p8>; + vdd-io-supply = <&vreg_l18b_1p8>; + vdd-buck-supply = <&vreg_l17b_1p8>; + vdd-mic-bias-supply = <&vreg_bob>; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 + 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + #sound-dai-cells = <1>; + + status = "disabled"; }; pm8350c_pwm_backlight: backlight { @@ -309,6 +341,10 @@ modem-init; }; +&lpass_va_macro { + vdd-micb-supply = <&vreg_bob>; +}; + /* NOTE: Not all Qcards have eDP connector stuffed */ &mdss_edp { aux-bus { @@ -378,6 +414,24 @@ no-sdio; }; +&swr0 { + wcd_rx: codec@0,4 { + compatible = "sdw20217010d00"; + reg = <0 4>; + #sound-dai-cells = <1>; + qcom,rx-port-mapping = <1 2 3 4 5>; + }; +}; + +&swr1 { + wcd_tx: codec@0,3 { + compatible = "sdw20217010d00"; + reg = <0 3>; + #sound-dai-cells = <1>; + qcom,tx-port-mapping = <1 2 3 4>; + }; +}; + uart_dbg: &uart5 { compatible = "qcom,geni-debug-uart"; status = "okay"; @@ -541,7 +595,7 @@ mos_bt_uart: &uart7 { }; &tlmm { - mos_bt_en: mos-bt-en { + mos_bt_en: mos-bt-en-pins { pins = "gpio85"; function = "gpio"; drive-strength = <2>; @@ -549,7 +603,7 @@ mos_bt_uart: &uart7 { }; /* For mos_bt_uart */ - qup_uart7_sleep_cts: qup-uart7-sleep-cts { + qup_uart7_sleep_cts: qup-uart7-sleep-cts-pins { pins = "gpio28"; function = "gpio"; /* @@ -563,7 +617,7 @@ mos_bt_uart: &uart7 { }; /* For mos_bt_uart */ - qup_uart7_sleep_rts: qup-uart7-sleep-rts { + qup_uart7_sleep_rts: qup-uart7-sleep-rts-pins { pins = "gpio29"; function = "gpio"; /* @@ -576,7 +630,7 @@ mos_bt_uart: &uart7 { }; /* For mos_bt_uart */ - qup_uart7_sleep_rx: qup-uart7-sleep-rx { + qup_uart7_sleep_rx: qup-uart7-sleep-rx-pins { pins = "gpio31"; function = "gpio"; /* @@ -588,7 +642,7 @@ mos_bt_uart: &uart7 { }; /* For mos_bt_uart */ - qup_uart7_sleep_tx: qup-uart7-sleep-tx { + qup_uart7_sleep_tx: qup-uart7-sleep-tx-pins { pins = "gpio30"; function = "gpio"; /* @@ -598,15 +652,35 @@ mos_bt_uart: &uart7 { bias-pull-up; }; - ts_int_conn: ts-int-conn { + ts_int_conn: ts-int-conn-pins { pins = "gpio55"; function = "gpio"; bias-pull-up; }; - ts_rst_conn: ts-rst-conn { + ts_rst_conn: ts-rst-conn-pins { pins = "gpio54"; function = "gpio"; drive-strength = <2>; }; + + us_euro_hs_sel: us-euro-hs-sel { + pins = "gpio81"; + function = "gpio"; + bias-pull-down; + drive-strength = <2>; + }; + + wcd_reset_n: wcd-reset-n { + pins = "gpio83"; + function = "gpio"; + drive-strength = <8>; + }; + + wcd_reset_n_sleep: wcd-reset-n-sleep { + pins = "gpio83"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 13d7f267b289..212580316d3e 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -22,6 +22,7 @@ #include <dt-bindings/reset/qcom,sdm845-aoss.h> #include <dt-bindings/reset/qcom,sdm845-pdc.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/sound/qcom,lpass.h> #include <dt-bindings/thermal/thermal.h> / { @@ -828,6 +829,7 @@ #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; + power-domains = <&rpmhpd SC7280_CX>; }; ipcc: mailbox@408000 { @@ -2043,7 +2045,9 @@ <&gcc GCC_PCIE_1_SLV_AXI_CLK>, <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, - <&gcc GCC_DDRSS_PCIE_SF_CLK>; + <&gcc GCC_DDRSS_PCIE_SF_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_CENTER_SF_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>; clock-names = "pipe", "pipe_mux", @@ -2055,7 +2059,9 @@ "bus_slave", "slave_q2a", "tbu", - "ddrss_sf_tbu"; + "ddrss_sf_tbu", + "aggre0", + "aggre1"; assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; assigned-clock-rates = <19200000>; @@ -2155,12 +2161,17 @@ }; tcsr_mutex: hwlock@1f40000 { - compatible = "qcom,tcsr-mutex", "syscon"; - reg = <0 0x01f40000 0 0x40000>; + compatible = "qcom,tcsr-mutex"; + reg = <0 0x01f40000 0 0x20000>; #hwlock-cells = <1>; }; - tcsr: syscon@1fc0000 { + tcsr_1: syscon@1f60000 { + compatible = "qcom,sc7280-tcsr", "syscon"; + reg = <0 0x01f60000 0 0x20000>; + }; + + tcsr_2: syscon@1fc0000 { compatible = "qcom,sc7280-tcsr", "syscon"; reg = <0 0x01fc0000 0 0x30000>; }; @@ -2168,14 +2179,121 @@ lpasscc: lpasscc@3000000 { compatible = "qcom,sc7280-lpasscc"; reg = <0 0x03000000 0 0x40>, - <0 0x03c04000 0 0x4>, - <0 0x03389000 0 0x24>; - reg-names = "qdsp6ss", "top_cc", "cc"; + <0 0x03c04000 0 0x4>; + reg-names = "qdsp6ss", "top_cc"; clocks = <&gcc GCC_CFG_NOC_LPASS_CLK>; clock-names = "iface"; #clock-cells = <1>; }; + lpass_rx_macro: codec@3200000 { + compatible = "qcom,sc7280-lpass-rx-macro"; + reg = <0 0x03200000 0 0x1000>; + + pinctrl-names = "default"; + pinctrl-0 = <&lpass_rx_swr_clk>, <&lpass_rx_swr_data>; + + clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>, + <&lpass_aon LPASS_AON_CC_TX_MCLK_2X_CLK>, + <&lpass_va_macro>; + clock-names = "mclk", "npl", "fsgen"; + + power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>, + <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>; + power-domain-names = "macro", "dcodec"; + + #clock-cells = <0>; + #sound-dai-cells = <1>; + + status = "disabled"; + }; + + swr0: soundwire@3210000 { + compatible = "qcom,soundwire-v1.6.0"; + reg = <0 0x03210000 0 0x2000>; + + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&lpass_rx_macro>; + clock-names = "iface"; + + qcom,din-ports = <0>; + qcom,dout-ports = <5>; + + resets = <&lpass_audiocc LPASS_AUDIO_SWR_RX_CGCR>; + reset-names = "swr_audio_cgcr"; + + qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff>; + qcom,ports-sinterval-low = /bits/ 8 <0x03 0x3f 0x1f 0x03 0x03>; + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x01>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00>; + qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0x00>; + + #sound-dai-cells = <1>; + #address-cells = <2>; + #size-cells = <0>; + + status = "disabled"; + }; + + lpass_tx_macro: codec@3220000 { + compatible = "qcom,sc7280-lpass-tx-macro"; + reg = <0 0x03220000 0 0x1000>; + + pinctrl-names = "default"; + pinctrl-0 = <&lpass_tx_swr_clk>, <&lpass_tx_swr_data>; + + clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>, + <&lpass_aon LPASS_AON_CC_TX_MCLK_2X_CLK>, + <&lpass_va_macro>; + clock-names = "mclk", "npl", "fsgen"; + + power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>, + <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>; + power-domain-names = "macro", "dcodec"; + + #clock-cells = <0>; + #sound-dai-cells = <1>; + + status = "disabled"; + }; + + swr1: soundwire@3230000 { + compatible = "qcom,soundwire-v1.6.0"; + reg = <0 0x03230000 0 0x2000>; + + interrupts-extended = <&intc GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 130 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&lpass_tx_macro>; + clock-names = "iface"; + + qcom,din-ports = <3>; + qcom,dout-ports = <0>; + + resets = <&lpass_audiocc LPASS_AUDIO_SWR_TX_CGCR>; + reset-names = "swr_audio_cgcr"; + + qcom,ports-sinterval-low = /bits/ 8 <0x01 0x03 0x03>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x00 0x02>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x00>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0xff 0x00 0xff>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0x00 0x01 0x00>; + qcom,port-offset = <1>; + + #sound-dai-cells = <1>; + #address-cells = <2>; + #size-cells = <0>; + + status = "disabled"; + }; + lpass_audiocc: clock-controller@3300000 { compatible = "qcom,sc7280-lpassaudiocc"; reg = <0 0x03300000 0 0x30000>; @@ -2185,6 +2303,27 @@ power-domains = <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>; #clock-cells = <1>; #power-domain-cells = <1>; + #reset-cells = <1>; + }; + + lpass_va_macro: codec@3370000 { + compatible = "qcom,sc7280-lpass-va-macro"; + reg = <0 0x03370000 0 0x1000>; + + pinctrl-names = "default"; + pinctrl-0 = <&lpass_dmic01_clk>, <&lpass_dmic01_data>; + + clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>; + clock-names = "mclk"; + + power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>, + <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>; + power-domain-names = "macro", "dcodec"; + + #clock-cells = <0>; + #sound-dai-cells = <1>; + + status = "disabled"; }; lpass_aon: clock-controller@3380000 { @@ -2192,13 +2331,13 @@ reg = <0 0x03380000 0 0x30000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, - <&lpasscore LPASS_CORE_CC_CORE_CLK>; + <&lpass_core LPASS_CORE_CC_CORE_CLK>; clock-names = "bi_tcxo", "bi_tcxo_ao", "iface"; #clock-cells = <1>; #power-domain-cells = <1>; }; - lpasscore: clock-controller@3900000 { + lpass_core: clock-controller@3900000 { compatible = "qcom,sc7280-lpasscorecc"; reg = <0 0x03900000 0 0x50000>; clocks = <&rpmhcc RPMH_CXO_CLK>; @@ -2208,6 +2347,67 @@ #power-domain-cells = <1>; }; + lpass_cpu: audio@3987000 { + compatible = "qcom,sc7280-lpass-cpu"; + + reg = <0 0x03987000 0 0x68000>, + <0 0x03b00000 0 0x29000>, + <0 0x03260000 0 0xc000>, + <0 0x03280000 0 0x29000>, + <0 0x03340000 0 0x29000>, + <0 0x0336c000 0 0x3000>; + reg-names = "lpass-hdmiif", + "lpass-lpaif", + "lpass-rxtx-cdc-dma-lpm", + "lpass-rxtx-lpaif", + "lpass-va-lpaif", + "lpass-va-cdc-dma-lpm"; + + iommus = <&apps_smmu 0x1820 0>, + <&apps_smmu 0x1821 0>, + <&apps_smmu 0x1832 0>; + + power-domains = <&rpmhpd SC7280_LCX>; + power-domain-names = "lcx"; + required-opps = <&rpmhpd_opp_nom>; + + clocks = <&lpass_aon LPASS_AON_CC_AUDIO_HM_H_CLK>, + <&lpass_core LPASS_CORE_CC_EXT_MCLK0_CLK>, + <&lpass_core LPASS_CORE_CC_SYSNOC_MPORT_CORE_CLK>, + <&lpass_core LPASS_CORE_CC_EXT_IF0_IBIT_CLK>, + <&lpass_core LPASS_CORE_CC_EXT_IF1_IBIT_CLK>, + <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM_CLK>, + <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM0_CLK>, + <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM1_CLK>, + <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM2_CLK>, + <&lpass_aon LPASS_AON_CC_VA_MEM0_CLK>; + clock-names = "aon_cc_audio_hm_h", + "audio_cc_ext_mclk0", + "core_cc_sysnoc_mport_core", + "core_cc_ext_if0_ibit", + "core_cc_ext_if1_ibit", + "audio_cc_codec_mem", + "audio_cc_codec_mem0", + "audio_cc_codec_mem1", + "audio_cc_codec_mem2", + "aon_cc_va_mem0"; + + #sound-dai-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "lpass-irq-lpaif", + "lpass-irq-hdmi", + "lpass-irq-vaif", + "lpass-irq-rxtxif"; + + status = "disabled"; + }; + lpass_hm: clock-controller@3c00000 { compatible = "qcom,sc7280-lpasshm"; reg = <0 0x3c00000 0 0x28>; @@ -2352,11 +2552,19 @@ opp-supported-hw = <0x03>; }; - opp-550000000 { + /* Only applicable for SKUs which has 550Mhz as Fmax */ + opp-550000000-0 { + opp-hz = /bits/ 64 <550000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + opp-peak-kBps = <8368000>; + opp-supported-hw = <0x01>; + }; + + opp-550000000-1 { opp-hz = /bits/ 64 <550000000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; opp-peak-kBps = <6832000>; - opp-supported-hw = <0x03>; + opp-supported-hw = <0x02>; }; opp-608000000 { @@ -2522,9 +2730,9 @@ <&pdc_reset PDC_MODEM_SYNC_RESET>; reset-names = "mss_restart", "pdc_reset"; - qcom,halt-regs = <&tcsr_mutex 0x23000 0x25000 0x28000 0x33000>; - qcom,ext-regs = <&tcsr 0x10000 0x10004 &tcsr_mutex 0x26004 0x26008>; - qcom,qaccept-regs = <&tcsr_mutex 0x23030 0x23040 0x23020>; + qcom,halt-regs = <&tcsr_1 0x3000 0x5000 0x8000 0x13000>; + qcom,ext-regs = <&tcsr_2 0x10000 0x10004 &tcsr_1 0x6004 0x6008>; + qcom,qaccept-regs = <&tcsr_1 0x3030 0x3040 0x3020>; status = "disabled"; @@ -3181,6 +3389,7 @@ "dm_hs_phy_irq"; power-domains = <&gcc GCC_USB30_SEC_GDSC>; + required-opps = <&rpmhpd_opp_nom>; resets = <&gcc GCC_USB30_SEC_BCR>; @@ -3259,7 +3468,7 @@ <&pdc_reset PDC_WPSS_SYNC_RESET>; reset-names = "restart", "pdc_sync"; - qcom,halt-regs = <&tcsr_mutex 0x37000>; + qcom,halt-regs = <&tcsr_1 0x17000>; status = "disabled"; @@ -3275,6 +3484,82 @@ }; }; + pmu@9091000 { + compatible = "qcom,sc7280-llcc-bwmon"; + reg = <0 0x9091000 0 0x1000>; + + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + + interconnects = <&mc_virt MASTER_LLCC 3 &mc_virt SLAVE_EBI1 3>; + + operating-points-v2 = <&llcc_bwmon_opp_table>; + + llcc_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-0 { + opp-peak-kBps = <800000>; + }; + opp-1 { + opp-peak-kBps = <1804000>; + }; + opp-2 { + opp-peak-kBps = <2188000>; + }; + opp-3 { + opp-peak-kBps = <3072000>; + }; + opp-4 { + opp-peak-kBps = <4068000>; + }; + opp-5 { + opp-peak-kBps = <6220000>; + }; + opp-6 { + opp-peak-kBps = <6832000>; + }; + opp-7 { + opp-peak-kBps = <8532000>; + }; + }; + }; + + pmu@90b6400 { + compatible = "qcom,sc7280-cpu-bwmon", "qcom,msm8998-bwmon"; + reg = <0 0x090b6400 0 0x600>; + + interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>; + + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &gem_noc SLAVE_LLCC 3>; + operating-points-v2 = <&cpu_bwmon_opp_table>; + + cpu_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-0 { + opp-peak-kBps = <2400000>; + }; + opp-1 { + opp-peak-kBps = <4800000>; + }; + opp-2 { + opp-peak-kBps = <7456000>; + }; + opp-3 { + opp-peak-kBps = <9600000>; + }; + opp-4 { + opp-peak-kBps = <12896000>; + }; + opp-5 { + opp-peak-kBps = <14928000>; + }; + opp-6 { + opp-peak-kBps = <17056000>; + }; + }; + }; + dc_noc: interconnect@90e0000 { reg = <0 0x090e0000 0 0x5080>; compatible = "qcom,sc7280-dc-noc"; @@ -3367,6 +3652,7 @@ "ss_phy_irq"; power-domains = <&gcc GCC_USB30_PRIM_GDSC>; + required-opps = <&rpmhpd_opp_nom>; resets = <&gcc GCC_USB30_PRIM_BCR>; @@ -3374,6 +3660,8 @@ <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_USB3_0 0>; interconnect-names = "usb-ddr", "apps-usb"; + wakeup-source; + usb_1_dwc3: usb@a600000 { compatible = "snps,dwc3"; reg = <0 0x0a600000 0 0xe000>; @@ -3384,7 +3672,6 @@ phys = <&usb_1_hsphy>, <&usb_1_ssphy>; phy-names = "usb2-phy", "usb3-phy"; maximum-speed = "super-speed"; - wakeup-source; }; }; @@ -3971,791 +4258,791 @@ gpio-ranges = <&tlmm 0 0 175>; wakeup-parent = <&pdc>; - dp_hot_plug_det: dp-hot-plug-det { + dp_hot_plug_det: dp-hot-plug-det-pins { pins = "gpio47"; function = "dp_hot"; }; - edp_hot_plug_det: edp-hot-plug-det { + edp_hot_plug_det: edp-hot-plug-det-pins { pins = "gpio60"; function = "edp_hot"; }; - mi2s0_data0: mi2s0-data0 { + mi2s0_data0: mi2s0-data0-pins { pins = "gpio98"; function = "mi2s0_data0"; }; - mi2s0_data1: mi2s0-data1 { + mi2s0_data1: mi2s0-data1-pins { pins = "gpio99"; function = "mi2s0_data1"; }; - mi2s0_mclk: mi2s0-mclk { + mi2s0_mclk: mi2s0-mclk-pins { pins = "gpio96"; function = "pri_mi2s"; }; - mi2s0_sclk: mi2s0-sclk { + mi2s0_sclk: mi2s0-sclk-pins { pins = "gpio97"; function = "mi2s0_sck"; }; - mi2s0_ws: mi2s0-ws { + mi2s0_ws: mi2s0-ws-pins { pins = "gpio100"; function = "mi2s0_ws"; }; - mi2s1_data0: mi2s1-data0 { + mi2s1_data0: mi2s1-data0-pins { pins = "gpio107"; function = "mi2s1_data0"; }; - mi2s1_sclk: mi2s1-sclk { + mi2s1_sclk: mi2s1-sclk-pins { pins = "gpio106"; function = "mi2s1_sck"; }; - mi2s1_ws: mi2s1-ws { + mi2s1_ws: mi2s1-ws-pins { pins = "gpio108"; function = "mi2s1_ws"; }; - pcie1_clkreq_n: pcie1-clkreq-n { + pcie1_clkreq_n: pcie1-clkreq-n-pins { pins = "gpio79"; function = "pcie1_clkreqn"; }; - qspi_clk: qspi-clk { + qspi_clk: qspi-clk-pins { pins = "gpio14"; function = "qspi_clk"; }; - qspi_cs0: qspi-cs0 { + qspi_cs0: qspi-cs0-pins { pins = "gpio15"; function = "qspi_cs"; }; - qspi_cs1: qspi-cs1 { + qspi_cs1: qspi-cs1-pins { pins = "gpio19"; function = "qspi_cs"; }; - qspi_data01: qspi-data01 { + qspi_data01: qspi-data01-pins { pins = "gpio12", "gpio13"; function = "qspi_data"; }; - qspi_data12: qspi-data12 { + qspi_data12: qspi-data12-pins { pins = "gpio16", "gpio17"; function = "qspi_data"; }; - qup_i2c0_data_clk: qup-i2c0-data-clk { + qup_i2c0_data_clk: qup-i2c0-data-clk-pins { pins = "gpio0", "gpio1"; function = "qup00"; }; - qup_i2c1_data_clk: qup-i2c1-data-clk { + qup_i2c1_data_clk: qup-i2c1-data-clk-pins { pins = "gpio4", "gpio5"; function = "qup01"; }; - qup_i2c2_data_clk: qup-i2c2-data-clk { + qup_i2c2_data_clk: qup-i2c2-data-clk-pins { pins = "gpio8", "gpio9"; function = "qup02"; }; - qup_i2c3_data_clk: qup-i2c3-data-clk { + qup_i2c3_data_clk: qup-i2c3-data-clk-pins { pins = "gpio12", "gpio13"; function = "qup03"; }; - qup_i2c4_data_clk: qup-i2c4-data-clk { + qup_i2c4_data_clk: qup-i2c4-data-clk-pins { pins = "gpio16", "gpio17"; function = "qup04"; }; - qup_i2c5_data_clk: qup-i2c5-data-clk { + qup_i2c5_data_clk: qup-i2c5-data-clk-pins { pins = "gpio20", "gpio21"; function = "qup05"; }; - qup_i2c6_data_clk: qup-i2c6-data-clk { + qup_i2c6_data_clk: qup-i2c6-data-clk-pins { pins = "gpio24", "gpio25"; function = "qup06"; }; - qup_i2c7_data_clk: qup-i2c7-data-clk { + qup_i2c7_data_clk: qup-i2c7-data-clk-pins { pins = "gpio28", "gpio29"; function = "qup07"; }; - qup_i2c8_data_clk: qup-i2c8-data-clk { + qup_i2c8_data_clk: qup-i2c8-data-clk-pins { pins = "gpio32", "gpio33"; function = "qup10"; }; - qup_i2c9_data_clk: qup-i2c9-data-clk { + qup_i2c9_data_clk: qup-i2c9-data-clk-pins { pins = "gpio36", "gpio37"; function = "qup11"; }; - qup_i2c10_data_clk: qup-i2c10-data-clk { + qup_i2c10_data_clk: qup-i2c10-data-clk-pins { pins = "gpio40", "gpio41"; function = "qup12"; }; - qup_i2c11_data_clk: qup-i2c11-data-clk { + qup_i2c11_data_clk: qup-i2c11-data-clk-pins { pins = "gpio44", "gpio45"; function = "qup13"; }; - qup_i2c12_data_clk: qup-i2c12-data-clk { + qup_i2c12_data_clk: qup-i2c12-data-clk-pins { pins = "gpio48", "gpio49"; function = "qup14"; }; - qup_i2c13_data_clk: qup-i2c13-data-clk { + qup_i2c13_data_clk: qup-i2c13-data-clk-pins { pins = "gpio52", "gpio53"; function = "qup15"; }; - qup_i2c14_data_clk: qup-i2c14-data-clk { + qup_i2c14_data_clk: qup-i2c14-data-clk-pins { pins = "gpio56", "gpio57"; function = "qup16"; }; - qup_i2c15_data_clk: qup-i2c15-data-clk { + qup_i2c15_data_clk: qup-i2c15-data-clk-pins { pins = "gpio60", "gpio61"; function = "qup17"; }; - qup_spi0_data_clk: qup-spi0-data-clk { + qup_spi0_data_clk: qup-spi0-data-clk-pins { pins = "gpio0", "gpio1", "gpio2"; function = "qup00"; }; - qup_spi0_cs: qup-spi0-cs { + qup_spi0_cs: qup-spi0-cs-pins { pins = "gpio3"; function = "qup00"; }; - qup_spi0_cs_gpio: qup-spi0-cs-gpio { + qup_spi0_cs_gpio: qup-spi0-cs-gpio-pins { pins = "gpio3"; function = "gpio"; }; - qup_spi1_data_clk: qup-spi1-data-clk { + qup_spi1_data_clk: qup-spi1-data-clk-pins { pins = "gpio4", "gpio5", "gpio6"; function = "qup01"; }; - qup_spi1_cs: qup-spi1-cs { + qup_spi1_cs: qup-spi1-cs-pins { pins = "gpio7"; function = "qup01"; }; - qup_spi1_cs_gpio: qup-spi1-cs-gpio { + qup_spi1_cs_gpio: qup-spi1-cs-gpio-pins { pins = "gpio7"; function = "gpio"; }; - qup_spi2_data_clk: qup-spi2-data-clk { + qup_spi2_data_clk: qup-spi2-data-clk-pins { pins = "gpio8", "gpio9", "gpio10"; function = "qup02"; }; - qup_spi2_cs: qup-spi2-cs { + qup_spi2_cs: qup-spi2-cs-pins { pins = "gpio11"; function = "qup02"; }; - qup_spi2_cs_gpio: qup-spi2-cs-gpio { + qup_spi2_cs_gpio: qup-spi2-cs-gpio-pins { pins = "gpio11"; function = "gpio"; }; - qup_spi3_data_clk: qup-spi3-data-clk { + qup_spi3_data_clk: qup-spi3-data-clk-pins { pins = "gpio12", "gpio13", "gpio14"; function = "qup03"; }; - qup_spi3_cs: qup-spi3-cs { + qup_spi3_cs: qup-spi3-cs-pins { pins = "gpio15"; function = "qup03"; }; - qup_spi3_cs_gpio: qup-spi3-cs-gpio { + qup_spi3_cs_gpio: qup-spi3-cs-gpio-pins { pins = "gpio15"; function = "gpio"; }; - qup_spi4_data_clk: qup-spi4-data-clk { + qup_spi4_data_clk: qup-spi4-data-clk-pins { pins = "gpio16", "gpio17", "gpio18"; function = "qup04"; }; - qup_spi4_cs: qup-spi4-cs { + qup_spi4_cs: qup-spi4-cs-pins { pins = "gpio19"; function = "qup04"; }; - qup_spi4_cs_gpio: qup-spi4-cs-gpio { + qup_spi4_cs_gpio: qup-spi4-cs-gpio-pins { pins = "gpio19"; function = "gpio"; }; - qup_spi5_data_clk: qup-spi5-data-clk { + qup_spi5_data_clk: qup-spi5-data-clk-pins { pins = "gpio20", "gpio21", "gpio22"; function = "qup05"; }; - qup_spi5_cs: qup-spi5-cs { + qup_spi5_cs: qup-spi5-cs-pins { pins = "gpio23"; function = "qup05"; }; - qup_spi5_cs_gpio: qup-spi5-cs-gpio { + qup_spi5_cs_gpio: qup-spi5-cs-gpio-pins { pins = "gpio23"; function = "gpio"; }; - qup_spi6_data_clk: qup-spi6-data-clk { + qup_spi6_data_clk: qup-spi6-data-clk-pins { pins = "gpio24", "gpio25", "gpio26"; function = "qup06"; }; - qup_spi6_cs: qup-spi6-cs { + qup_spi6_cs: qup-spi6-cs-pins { pins = "gpio27"; function = "qup06"; }; - qup_spi6_cs_gpio: qup-spi6-cs-gpio { + qup_spi6_cs_gpio: qup-spi6-cs-gpio-pins { pins = "gpio27"; function = "gpio"; }; - qup_spi7_data_clk: qup-spi7-data-clk { + qup_spi7_data_clk: qup-spi7-data-clk-pins { pins = "gpio28", "gpio29", "gpio30"; function = "qup07"; }; - qup_spi7_cs: qup-spi7-cs { + qup_spi7_cs: qup-spi7-cs-pins { pins = "gpio31"; function = "qup07"; }; - qup_spi7_cs_gpio: qup-spi7-cs-gpio { + qup_spi7_cs_gpio: qup-spi7-cs-gpio-pins { pins = "gpio31"; function = "gpio"; }; - qup_spi8_data_clk: qup-spi8-data-clk { + qup_spi8_data_clk: qup-spi8-data-clk-pins { pins = "gpio32", "gpio33", "gpio34"; function = "qup10"; }; - qup_spi8_cs: qup-spi8-cs { + qup_spi8_cs: qup-spi8-cs-pins { pins = "gpio35"; function = "qup10"; }; - qup_spi8_cs_gpio: qup-spi8-cs-gpio { + qup_spi8_cs_gpio: qup-spi8-cs-gpio-pins { pins = "gpio35"; function = "gpio"; }; - qup_spi9_data_clk: qup-spi9-data-clk { + qup_spi9_data_clk: qup-spi9-data-clk-pins { pins = "gpio36", "gpio37", "gpio38"; function = "qup11"; }; - qup_spi9_cs: qup-spi9-cs { + qup_spi9_cs: qup-spi9-cs-pins { pins = "gpio39"; function = "qup11"; }; - qup_spi9_cs_gpio: qup-spi9-cs-gpio { + qup_spi9_cs_gpio: qup-spi9-cs-gpio-pins { pins = "gpio39"; function = "gpio"; }; - qup_spi10_data_clk: qup-spi10-data-clk { + qup_spi10_data_clk: qup-spi10-data-clk-pins { pins = "gpio40", "gpio41", "gpio42"; function = "qup12"; }; - qup_spi10_cs: qup-spi10-cs { + qup_spi10_cs: qup-spi10-cs-pins { pins = "gpio43"; function = "qup12"; }; - qup_spi10_cs_gpio: qup-spi10-cs-gpio { + qup_spi10_cs_gpio: qup-spi10-cs-gpio-pins { pins = "gpio43"; function = "gpio"; }; - qup_spi11_data_clk: qup-spi11-data-clk { + qup_spi11_data_clk: qup-spi11-data-clk-pins { pins = "gpio44", "gpio45", "gpio46"; function = "qup13"; }; - qup_spi11_cs: qup-spi11-cs { + qup_spi11_cs: qup-spi11-cs-pins { pins = "gpio47"; function = "qup13"; }; - qup_spi11_cs_gpio: qup-spi11-cs-gpio { + qup_spi11_cs_gpio: qup-spi11-cs-gpio-pins { pins = "gpio47"; function = "gpio"; }; - qup_spi12_data_clk: qup-spi12-data-clk { + qup_spi12_data_clk: qup-spi12-data-clk-pins { pins = "gpio48", "gpio49", "gpio50"; function = "qup14"; }; - qup_spi12_cs: qup-spi12-cs { + qup_spi12_cs: qup-spi12-cs-pins { pins = "gpio51"; function = "qup14"; }; - qup_spi12_cs_gpio: qup-spi12-cs-gpio { + qup_spi12_cs_gpio: qup-spi12-cs-gpio-pins { pins = "gpio51"; function = "gpio"; }; - qup_spi13_data_clk: qup-spi13-data-clk { + qup_spi13_data_clk: qup-spi13-data-clk-pins { pins = "gpio52", "gpio53", "gpio54"; function = "qup15"; }; - qup_spi13_cs: qup-spi13-cs { + qup_spi13_cs: qup-spi13-cs-pins { pins = "gpio55"; function = "qup15"; }; - qup_spi13_cs_gpio: qup-spi13-cs-gpio { + qup_spi13_cs_gpio: qup-spi13-cs-gpio-pins { pins = "gpio55"; function = "gpio"; }; - qup_spi14_data_clk: qup-spi14-data-clk { + qup_spi14_data_clk: qup-spi14-data-clk-pins { pins = "gpio56", "gpio57", "gpio58"; function = "qup16"; }; - qup_spi14_cs: qup-spi14-cs { + qup_spi14_cs: qup-spi14-cs-pins { pins = "gpio59"; function = "qup16"; }; - qup_spi14_cs_gpio: qup-spi14-cs-gpio { + qup_spi14_cs_gpio: qup-spi14-cs-gpio-pins { pins = "gpio59"; function = "gpio"; }; - qup_spi15_data_clk: qup-spi15-data-clk { + qup_spi15_data_clk: qup-spi15-data-clk-pins { pins = "gpio60", "gpio61", "gpio62"; function = "qup17"; }; - qup_spi15_cs: qup-spi15-cs { + qup_spi15_cs: qup-spi15-cs-pins { pins = "gpio63"; function = "qup17"; }; - qup_spi15_cs_gpio: qup-spi15-cs-gpio { + qup_spi15_cs_gpio: qup-spi15-cs-gpio-pins { pins = "gpio63"; function = "gpio"; }; - qup_uart0_cts: qup-uart0-cts { + qup_uart0_cts: qup-uart0-cts-pins { pins = "gpio0"; function = "qup00"; }; - qup_uart0_rts: qup-uart0-rts { + qup_uart0_rts: qup-uart0-rts-pins { pins = "gpio1"; function = "qup00"; }; - qup_uart0_tx: qup-uart0-tx { + qup_uart0_tx: qup-uart0-tx-pins { pins = "gpio2"; function = "qup00"; }; - qup_uart0_rx: qup-uart0-rx { + qup_uart0_rx: qup-uart0-rx-pins { pins = "gpio3"; function = "qup00"; }; - qup_uart1_cts: qup-uart1-cts { + qup_uart1_cts: qup-uart1-cts-pins { pins = "gpio4"; function = "qup01"; }; - qup_uart1_rts: qup-uart1-rts { + qup_uart1_rts: qup-uart1-rts-pins { pins = "gpio5"; function = "qup01"; }; - qup_uart1_tx: qup-uart1-tx { + qup_uart1_tx: qup-uart1-tx-pins { pins = "gpio6"; function = "qup01"; }; - qup_uart1_rx: qup-uart1-rx { + qup_uart1_rx: qup-uart1-rx-pins { pins = "gpio7"; function = "qup01"; }; - qup_uart2_cts: qup-uart2-cts { + qup_uart2_cts: qup-uart2-cts-pins { pins = "gpio8"; function = "qup02"; }; - qup_uart2_rts: qup-uart2-rts { + qup_uart2_rts: qup-uart2-rts-pins { pins = "gpio9"; function = "qup02"; }; - qup_uart2_tx: qup-uart2-tx { + qup_uart2_tx: qup-uart2-tx-pins { pins = "gpio10"; function = "qup02"; }; - qup_uart2_rx: qup-uart2-rx { + qup_uart2_rx: qup-uart2-rx-pins { pins = "gpio11"; function = "qup02"; }; - qup_uart3_cts: qup-uart3-cts { + qup_uart3_cts: qup-uart3-cts-pins { pins = "gpio12"; function = "qup03"; }; - qup_uart3_rts: qup-uart3-rts { + qup_uart3_rts: qup-uart3-rts-pins { pins = "gpio13"; function = "qup03"; }; - qup_uart3_tx: qup-uart3-tx { + qup_uart3_tx: qup-uart3-tx-pins { pins = "gpio14"; function = "qup03"; }; - qup_uart3_rx: qup-uart3-rx { + qup_uart3_rx: qup-uart3-rx-pins { pins = "gpio15"; function = "qup03"; }; - qup_uart4_cts: qup-uart4-cts { + qup_uart4_cts: qup-uart4-cts-pins { pins = "gpio16"; function = "qup04"; }; - qup_uart4_rts: qup-uart4-rts { + qup_uart4_rts: qup-uart4-rts-pins { pins = "gpio17"; function = "qup04"; }; - qup_uart4_tx: qup-uart4-tx { + qup_uart4_tx: qup-uart4-tx-pins { pins = "gpio18"; function = "qup04"; }; - qup_uart4_rx: qup-uart4-rx { + qup_uart4_rx: qup-uart4-rx-pins { pins = "gpio19"; function = "qup04"; }; - qup_uart5_cts: qup-uart5-cts { + qup_uart5_cts: qup-uart5-cts-pins { pins = "gpio20"; function = "qup05"; }; - qup_uart5_rts: qup-uart5-rts { + qup_uart5_rts: qup-uart5-rts-pins { pins = "gpio21"; function = "qup05"; }; - qup_uart5_tx: qup-uart5-tx { + qup_uart5_tx: qup-uart5-tx-pins { pins = "gpio22"; function = "qup05"; }; - qup_uart5_rx: qup-uart5-rx { + qup_uart5_rx: qup-uart5-rx-pins { pins = "gpio23"; function = "qup05"; }; - qup_uart6_cts: qup-uart6-cts { + qup_uart6_cts: qup-uart6-cts-pins { pins = "gpio24"; function = "qup06"; }; - qup_uart6_rts: qup-uart6-rts { + qup_uart6_rts: qup-uart6-rts-pins { pins = "gpio25"; function = "qup06"; }; - qup_uart6_tx: qup-uart6-tx { + qup_uart6_tx: qup-uart6-tx-pins { pins = "gpio26"; function = "qup06"; }; - qup_uart6_rx: qup-uart6-rx { + qup_uart6_rx: qup-uart6-rx-pins { pins = "gpio27"; function = "qup06"; }; - qup_uart7_cts: qup-uart7-cts { + qup_uart7_cts: qup-uart7-cts-pins { pins = "gpio28"; function = "qup07"; }; - qup_uart7_rts: qup-uart7-rts { + qup_uart7_rts: qup-uart7-rts-pins { pins = "gpio29"; function = "qup07"; }; - qup_uart7_tx: qup-uart7-tx { + qup_uart7_tx: qup-uart7-tx-pins { pins = "gpio30"; function = "qup07"; }; - qup_uart7_rx: qup-uart7-rx { + qup_uart7_rx: qup-uart7-rx-pins { pins = "gpio31"; function = "qup07"; }; - qup_uart8_cts: qup-uart8-cts { + qup_uart8_cts: qup-uart8-cts-pins { pins = "gpio32"; function = "qup10"; }; - qup_uart8_rts: qup-uart8-rts { + qup_uart8_rts: qup-uart8-rts-pins { pins = "gpio33"; function = "qup10"; }; - qup_uart8_tx: qup-uart8-tx { + qup_uart8_tx: qup-uart8-tx-pins { pins = "gpio34"; function = "qup10"; }; - qup_uart8_rx: qup-uart8-rx { + qup_uart8_rx: qup-uart8-rx-pins { pins = "gpio35"; function = "qup10"; }; - qup_uart9_cts: qup-uart9-cts { + qup_uart9_cts: qup-uart9-cts-pins { pins = "gpio36"; function = "qup11"; }; - qup_uart9_rts: qup-uart9-rts { + qup_uart9_rts: qup-uart9-rts-pins { pins = "gpio37"; function = "qup11"; }; - qup_uart9_tx: qup-uart9-tx { + qup_uart9_tx: qup-uart9-tx-pins { pins = "gpio38"; function = "qup11"; }; - qup_uart9_rx: qup-uart9-rx { + qup_uart9_rx: qup-uart9-rx-pins { pins = "gpio39"; function = "qup11"; }; - qup_uart10_cts: qup-uart10-cts { + qup_uart10_cts: qup-uart10-cts-pins { pins = "gpio40"; function = "qup12"; }; - qup_uart10_rts: qup-uart10-rts { + qup_uart10_rts: qup-uart10-rts-pins { pins = "gpio41"; function = "qup12"; }; - qup_uart10_tx: qup-uart10-tx { + qup_uart10_tx: qup-uart10-tx-pins { pins = "gpio42"; function = "qup12"; }; - qup_uart10_rx: qup-uart10-rx { + qup_uart10_rx: qup-uart10-rx-pins { pins = "gpio43"; function = "qup12"; }; - qup_uart11_cts: qup-uart11-cts { + qup_uart11_cts: qup-uart11-cts-pins { pins = "gpio44"; function = "qup13"; }; - qup_uart11_rts: qup-uart11-rts { + qup_uart11_rts: qup-uart11-rts-pins { pins = "gpio45"; function = "qup13"; }; - qup_uart11_tx: qup-uart11-tx { + qup_uart11_tx: qup-uart11-tx-pins { pins = "gpio46"; function = "qup13"; }; - qup_uart11_rx: qup-uart11-rx { + qup_uart11_rx: qup-uart11-rx-pins { pins = "gpio47"; function = "qup13"; }; - qup_uart12_cts: qup-uart12-cts { + qup_uart12_cts: qup-uart12-cts-pins { pins = "gpio48"; function = "qup14"; }; - qup_uart12_rts: qup-uart12-rts { + qup_uart12_rts: qup-uart12-rts-pins { pins = "gpio49"; function = "qup14"; }; - qup_uart12_tx: qup-uart12-tx { + qup_uart12_tx: qup-uart12-tx-pins { pins = "gpio50"; function = "qup14"; }; - qup_uart12_rx: qup-uart12-rx { + qup_uart12_rx: qup-uart12-rx-pins { pins = "gpio51"; function = "qup14"; }; - qup_uart13_cts: qup-uart13-cts { + qup_uart13_cts: qup-uart13-cts-pins { pins = "gpio52"; function = "qup15"; }; - qup_uart13_rts: qup-uart13-rts { + qup_uart13_rts: qup-uart13-rts-pins { pins = "gpio53"; function = "qup15"; }; - qup_uart13_tx: qup-uart13-tx { + qup_uart13_tx: qup-uart13-tx-pins { pins = "gpio54"; function = "qup15"; }; - qup_uart13_rx: qup-uart13-rx { + qup_uart13_rx: qup-uart13-rx-pins { pins = "gpio55"; function = "qup15"; }; - qup_uart14_cts: qup-uart14-cts { + qup_uart14_cts: qup-uart14-cts-pins { pins = "gpio56"; function = "qup16"; }; - qup_uart14_rts: qup-uart14-rts { + qup_uart14_rts: qup-uart14-rts-pins { pins = "gpio57"; function = "qup16"; }; - qup_uart14_tx: qup-uart14-tx { + qup_uart14_tx: qup-uart14-tx-pins { pins = "gpio58"; function = "qup16"; }; - qup_uart14_rx: qup-uart14-rx { + qup_uart14_rx: qup-uart14-rx-pins { pins = "gpio59"; function = "qup16"; }; - qup_uart15_cts: qup-uart15-cts { + qup_uart15_cts: qup-uart15-cts-pins { pins = "gpio60"; function = "qup17"; }; - qup_uart15_rts: qup-uart15-rts { + qup_uart15_rts: qup-uart15-rts-pins { pins = "gpio61"; function = "qup17"; }; - qup_uart15_tx: qup-uart15-tx { + qup_uart15_tx: qup-uart15-tx-pins { pins = "gpio62"; function = "qup17"; }; - qup_uart15_rx: qup-uart15-rx { + qup_uart15_rx: qup-uart15-rx-pins { pins = "gpio63"; function = "qup17"; }; - sdc1_clk: sdc1-clk { + sdc1_clk: sdc1-clk-pins { pins = "sdc1_clk"; }; - sdc1_cmd: sdc1-cmd { + sdc1_cmd: sdc1-cmd-pins { pins = "sdc1_cmd"; }; - sdc1_data: sdc1-data { + sdc1_data: sdc1-data-pins { pins = "sdc1_data"; }; - sdc1_rclk: sdc1-rclk { + sdc1_rclk: sdc1-rclk-pins { pins = "sdc1_rclk"; }; - sdc1_clk_sleep: sdc1-clk-sleep { + sdc1_clk_sleep: sdc1-clk-sleep-pins { pins = "sdc1_clk"; drive-strength = <2>; bias-bus-hold; }; - sdc1_cmd_sleep: sdc1-cmd-sleep { + sdc1_cmd_sleep: sdc1-cmd-sleep-pins { pins = "sdc1_cmd"; drive-strength = <2>; bias-bus-hold; }; - sdc1_data_sleep: sdc1-data-sleep { + sdc1_data_sleep: sdc1-data-sleep-pins { pins = "sdc1_data"; drive-strength = <2>; bias-bus-hold; }; - sdc1_rclk_sleep: sdc1-rclk-sleep { + sdc1_rclk_sleep: sdc1-rclk-sleep-pins { pins = "sdc1_rclk"; drive-strength = <2>; bias-bus-hold; }; - sdc2_clk: sdc2-clk { + sdc2_clk: sdc2-clk-pins { pins = "sdc2_clk"; }; - sdc2_cmd: sdc2-cmd { + sdc2_cmd: sdc2-cmd-pins { pins = "sdc2_cmd"; }; - sdc2_data: sdc2-data { + sdc2_data: sdc2-data-pins { pins = "sdc2_data"; }; - sdc2_clk_sleep: sdc2-clk-sleep { + sdc2_clk_sleep: sdc2-clk-sleep-pins { pins = "sdc2_clk"; drive-strength = <2>; bias-bus-hold; }; - sdc2_cmd_sleep: sdc2-cmd-sleep { + sdc2_cmd_sleep: sdc2-cmd-sleep-pins { pins = "sdc2_cmd"; drive-strength = <2>; bias-bus-hold; }; - sdc2_data_sleep: sdc2-data-sleep { + sdc2_data_sleep: sdc2-data-sleep-pins { pins = "sdc2_data"; drive-strength = <2>; bias-bus-hold; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts index 45058ad0a1c8..fea7d8273ccd 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts @@ -87,7 +87,6 @@ regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; regulator-boot-on; regulator-always-on; }; @@ -97,7 +96,6 @@ regulator-min-microvolt = <912000>; regulator-max-microvolt = <912000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; }; vreg_l6b: ldo6 { @@ -105,7 +103,6 @@ regulator-min-microvolt = <880000>; regulator-max-microvolt = <880000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; regulator-boot-on; }; }; @@ -119,7 +116,6 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; }; vreg_l7c: ldo7 { @@ -135,7 +131,6 @@ regulator-min-microvolt = <3072000>; regulator-max-microvolt = <3072000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; }; }; @@ -158,7 +153,6 @@ regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; }; vreg_l6d: ldo6 { @@ -166,7 +160,6 @@ regulator-min-microvolt = <880000>; regulator-max-microvolt = <880000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; }; vreg_l7d: ldo7 { @@ -174,7 +167,6 @@ regulator-min-microvolt = <3072000>; regulator-max-microvolt = <3072000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; }; vreg_l9d: ldo9 { @@ -182,7 +174,6 @@ regulator-min-microvolt = <912000>; regulator-max-microvolt = <912000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; }; }; }; @@ -203,16 +194,20 @@ clock-frequency = <400000>; pinctrl-names = "default"; - pinctrl-0 = <&qup0_i2c4_default>, <&ts0_default>; + pinctrl-0 = <&qup0_i2c4_default>; status = "okay"; touchscreen@10 { compatible = "hid-over-i2c"; reg = <0x10>; + hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <&vreg_misc_3p3>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts0_default>; }; }; @@ -228,24 +223,36 @@ clock-frequency = <400000>; pinctrl-names = "default"; - pinctrl-0 = <&qup2_i2c5_default>, <&kybd_default>, <&tpad_default>; + pinctrl-0 = <&qup2_i2c5_default>; status = "okay"; touchpad@15 { compatible = "hid-over-i2c"; reg = <0x15>; + hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <&vreg_misc_3p3>; + + pinctrl-names = "default"; + pinctrl-0 = <&tpad_default>; + + wakeup-source; }; keyboard@68 { compatible = "hid-over-i2c"; reg = <0x68>; + hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <&vreg_misc_3p3>; + + pinctrl-names = "default"; + pinctrl-0 = <&kybd_default>; + + wakeup-source; }; }; @@ -414,7 +421,7 @@ int-n { pins = "gpio175"; function = "gpio"; - bias-pull-up; + bias-disable; }; reset-n { diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts index 84dc92dda0b8..b2b744bb8a53 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts @@ -79,7 +79,6 @@ regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; regulator-boot-on; }; @@ -88,7 +87,6 @@ regulator-min-microvolt = <912000>; regulator-max-microvolt = <912000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; }; vreg_l6b: ldo6 { @@ -96,7 +94,6 @@ regulator-min-microvolt = <880000>; regulator-max-microvolt = <880000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; regulator-boot-on; regulator-always-on; // FIXME: VDD_A_EDP_0_0P9 }; @@ -111,7 +108,6 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; }; vreg_l12c: ldo12 { @@ -119,7 +115,6 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; }; vreg_l13c: ldo13 { @@ -127,7 +122,6 @@ regulator-min-microvolt = <3072000>; regulator-max-microvolt = <3072000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; }; }; @@ -142,7 +136,6 @@ regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; }; vreg_l4d: ldo4 { @@ -150,7 +143,6 @@ regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; }; vreg_l7d: ldo7 { @@ -158,7 +150,6 @@ regulator-min-microvolt = <3072000>; regulator-max-microvolt = <3072000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; }; vreg_l9d: ldo9 { @@ -166,7 +157,6 @@ regulator-min-microvolt = <912000>; regulator-max-microvolt = <912000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; }; }; }; @@ -187,7 +177,7 @@ clock-frequency = <400000>; pinctrl-names = "default"; - pinctrl-0 = <&qup0_i2c4_default>, <&ts0_default>; + pinctrl-0 = <&qup0_i2c4_default>; status = "okay"; @@ -195,9 +185,13 @@ touchscreen@10 { compatible = "hid-over-i2c"; reg = <0x10>; + hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <&vreg_misc_3p3>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts0_default>; }; }; @@ -213,35 +207,63 @@ clock-frequency = <400000>; pinctrl-names = "default"; - pinctrl-0 = <&qup2_i2c5_default>, <&kybd_default>, <&tpad_default>; + pinctrl-0 = <&qup2_i2c5_default>; status = "okay"; + touchpad@15 { + compatible = "hid-over-i2c"; + reg = <0x15>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + + pinctrl-names = "default"; + pinctrl-0 = <&tpad_default>; + + wakeup-source; + + status = "disabled"; + }; + touchpad@2c { compatible = "hid-over-i2c"; reg = <0x2c>; + hid-descr-addr = <0x20>; interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <&vreg_misc_3p3>; + + pinctrl-names = "default"; + pinctrl-0 = <&tpad_default>; + + wakeup-source; }; keyboard@68 { compatible = "hid-over-i2c"; reg = <0x68>; + hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <&vreg_misc_3p3>; + + pinctrl-names = "default"; + pinctrl-0 = <&kybd_default>; + + wakeup-source; }; }; &remoteproc_adsp { - firmware-name = "qcom/sc8280xp/qcadsp8280.mbn"; + firmware-name = "qcom/sc8280xp/LENOVO/21BX/qcadsp8280.mbn"; status = "okay"; }; &remoteproc_nsp0 { - firmware-name = "qcom/sc8280xp/qccdsp8280.mbn"; + firmware-name = "qcom/sc8280xp/LENOVO/21BX/qccdsp8280.mbn"; status = "okay"; }; @@ -373,7 +395,7 @@ int-n { pins = "gpio175"; function = "gpio"; - bias-pull-up; + bias-disable; }; reset-n { diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi index ae90b97aecb8..24836b6b9bbc 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi @@ -60,9 +60,8 @@ #interrupt-cells = <2>; }; - pmc8280c_lpg: lpg@e800 { + pmc8280c_lpg: pwm { compatible = "qcom,pm8350c-pwm"; - reg = <0xe800>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi index 49ea8b5612fc..c32bcded2aef 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi @@ -1312,6 +1312,8 @@ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>; interconnect-names = "usb-ddr", "apps-usb"; + wakeup-source; + status = "disabled"; usb_0_dwc3: usb@a600000 { @@ -1364,6 +1366,8 @@ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>; interconnect-names = "usb-ddr", "apps-usb"; + wakeup-source; + status = "disabled"; usb_1_dwc3: usb@a800000 { diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index 1bc9091cad2a..b51b85f583e5 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -697,9 +697,15 @@ #thermal-sensor-cells = <1>; }; - tcsr_mutex_regs: syscon@1f40000 { - compatible = "syscon"; - reg = <0x01f40000 0x40000>; + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x01f40000 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr_regs_1: syscon@1f60000 { + compatible = "qcom,sdm630-tcsr", "syscon"; + reg = <0x01f60000 0x20000>; }; tlmm: pinctrl@3100000 { @@ -2351,12 +2357,6 @@ }; }; - tcsr_mutex: hwlock { - compatible = "qcom,tcsr-mutex"; - syscon = <&tcsr_mutex_regs 0 0x1000>; - #hwlock-cells = <1>; - }; - sound: sound { }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index c6e2c571b452..132417e2d11e 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -522,7 +522,7 @@ &pcie0 { status = "okay"; - perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>; + perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; enable-gpio = <&tlmm 134 GPIO_ACTIVE_HIGH>; vddpe-3v3-supply = <&pcie0_3p3v_dual>; @@ -540,7 +540,7 @@ &pcie1 { status = "okay"; - perst-gpio = <&tlmm 102 GPIO_ACTIVE_LOW>; + perst-gpios = <&tlmm 102 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pcie1_default_state>; @@ -1081,7 +1081,7 @@ pinctrl-names = "default"; clock-names = "extclk"; clocks = <&rpmhcc RPMH_LN_BB_CLK2>; - reset-gpios = <&tlmm 64 0>; + reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; vdd-buck-supply = <&vreg_s4a_1p8>; vdd-buck-sido-supply = <&vreg_s4a_1p8>; vdd-tx-supply = <&vreg_s4a_1p8>; @@ -1214,8 +1214,6 @@ reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&cam0_default>; - gpios = <&tlmm 13 0>, - <&tlmm 9 GPIO_ACTIVE_LOW>; clocks = <&clock_camcc CAM_CC_MCLK0_CLK>; clock-names = "xvclk"; @@ -1228,8 +1226,6 @@ * both have to be enabled through the power management * gpios. */ - power-domains = <&clock_camcc TITAN_TOP_GDSC>; - dovdd-supply = <&vreg_lvs1a_1p8>; avdd-supply = <&cam0_avdd_2v8>; dvdd-supply = <&cam0_dvdd_1v2>; @@ -1255,11 +1251,9 @@ reg = <0x60>; // CAM3_RST_N - enable-gpios = <&tlmm 21 0>; + enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&cam3_default>; - gpios = <&tlmm 16 0>, - <&tlmm 21 0>; clocks = <&clock_camcc CAM_CC_MCLK3_CLK>; clock-names = "xclk"; @@ -1273,8 +1267,6 @@ * * No 1.2V vddd-supply regulator is used. */ - power-domains = <&clock_camcc TITAN_TOP_GDSC>; - vdddo-supply = <&vreg_lvs1a_1p8>; vdda-supply = <&cam3_avdd_2v8>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts index 7713e8060c5b..de2d10e0315a 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts @@ -536,42 +536,42 @@ reg = <ADC5_XO_THERM_100K_PU>; label = "xo_therm"; qcom,ratiometric; - qcom,hw-settle-time-us = <200>; + qcom,hw-settle-time = <200>; }; adc-chan@4d { reg = <ADC5_AMUX_THM1_100K_PU>; label = "msm_therm"; qcom,ratiometric; - qcom,hw-settle-time-us = <200>; + qcom,hw-settle-time = <200>; }; adc-chan@4f { reg = <ADC5_AMUX_THM3_100K_PU>; label = "pa_therm1"; qcom,ratiometric; - qcom,hw-settle-time-us = <200>; + qcom,hw-settle-time = <200>; }; adc-chan@51 { reg = <ADC5_AMUX_THM5_100K_PU>; label = "quiet_therm"; qcom,ratiometric; - qcom,hw-settle-time-us = <200>; + qcom,hw-settle-time = <200>; }; adc-chan@83 { reg = <ADC5_VPH_PWR>; label = "vph_pwr"; qcom,ratiometric; - qcom,hw-settle-time-us = <200>; + qcom,hw-settle-time = <200>; }; adc-chan@85 { reg = <ADC5_VCOIN>; label = "vcoin"; qcom,ratiometric; - qcom,hw-settle-time-us = <200>; + qcom,hw-settle-time = <200>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts index 82c27f90d300..0f470cf1ed1c 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts @@ -546,7 +546,7 @@ pinctrl-names = "default"; clock-names = "extclk"; clocks = <&rpmhcc RPMH_LN_BB_CLK2>; - reset-gpios = <&tlmm 64 0>; + reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; vdd-buck-supply = <&vreg_s4a_1p8>; vdd-buck-sido-supply = <&vreg_s4a_1p8>; vdd-tx-supply = <&vreg_s4a_1p8>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts index 7747081b9887..afc17e4d403f 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts @@ -126,7 +126,7 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - gpio = <&tlmm 23 0>; + gpio = <&tlmm 23 GPIO_ACTIVE_HIGH>; regulator-always-on; regulator-boot-on; enable-active-high; @@ -522,7 +522,7 @@ }; &pm8998_gpio { - volume_up_gpio: pm8998_gpio6 { + volume_up_gpio: pm8998-gpio6-state { pinconf { qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; function = "normal"; @@ -617,7 +617,7 @@ pins = "gpio6", "gpio10"; function = "gpio"; drive-strength = <8>; - bias-disable = <0>; + bias-disable; }; sde_dsi_suspend: sde-dsi-suspend { @@ -712,7 +712,7 @@ pinctrl-names = "default"; clock-names = "extclk"; clocks = <&rpmhcc RPMH_LN_BB_CLK2>; - reset-gpios = <&tlmm 64 0>; + reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; vdd-buck-sido-supply = <&vreg_s4a_1p8>; vdd-buck-supply = <&vreg_s4a_1p8>; vdd-tx-supply = <&vreg_s4a_1p8>; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index f0e286715d1b..d761da47220d 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -919,12 +919,6 @@ }; }; - tcsr_mutex: hwlock { - compatible = "qcom,tcsr-mutex"; - syscon = <&tcsr_mutex_regs 0 0x1000>; - #hwlock-cells = <1>; - }; - smp2p-cdsp { compatible = "qcom,smp2p"; qcom,smem = <94>, <432>; @@ -2138,11 +2132,48 @@ llcc: system-cache-controller@1100000 { compatible = "qcom,sdm845-llcc"; - reg = <0 0x01100000 0 0x200000>, <0 0x01300000 0 0x50000>; + reg = <0 0x01100000 0 0x31000>, <0 0x01300000 0 0x50000>; reg-names = "llcc_base", "llcc_broadcast_base"; interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; }; + pmu@114a000 { + compatible = "qcom,sdm845-llcc-bwmon"; + reg = <0 0x0114a000 0 0x1000>; + interrupts = <GIC_SPI 580 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&mem_noc MASTER_LLCC 3 &mem_noc SLAVE_EBI1 3>; + + operating-points-v2 = <&llcc_bwmon_opp_table>; + + llcc_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + /* + * The interconnect path bandwidth taken from + * cpu4_opp_table bandwidth for gladiator_noc-mem_noc + * interconnect. This also matches the + * bandwidth table of qcom,llccbw (qcom,bw-tbl, + * bus width: 4 bytes) from msm-4.9 downstream + * kernel. + */ + opp-0 { + opp-peak-kBps = <800000>; + }; + opp-1 { + opp-peak-kBps = <1804000>; + }; + opp-2 { + opp-peak-kBps = <3072000>; + }; + opp-3 { + opp-peak-kBps = <5412000>; + }; + opp-4 { + opp-peak-kBps = <7216000>; + }; + }; + }; + pmu@1436400 { compatible = "qcom,sdm845-bwmon", "qcom,msm8998-bwmon"; reg = <0 0x01436400 0 0x600>; @@ -2588,9 +2619,15 @@ status = "disabled"; }; - tcsr_mutex_regs: syscon@1f40000 { - compatible = "syscon"; - reg = <0 0x01f40000 0 0x40000>; + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0 0x01f40000 0 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr_regs_1: syscon@1f60000 { + compatible = "qcom,sdm845-tcsr", "syscon"; + reg = <0 0x01f60000 0 0x20000>; }; tlmm: pinctrl@3400000 { @@ -3207,7 +3244,7 @@ <&pdc_reset PDC_MODEM_SYNC_RESET>; reset-names = "mss_restart", "pdc_reset"; - qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>; + qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>; power-domains = <&rpmhpd SDM845_CX>, <&rpmhpd SDM845_MX>, @@ -4836,7 +4873,7 @@ aoss_qmp: power-controller@c300000 { compatible = "qcom,sdm845-aoss-qmp", "qcom,aoss-qmp"; - reg = <0 0x0c300000 0 0x100000>; + reg = <0 0x0c300000 0 0x400>; interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>; mboxes = <&apss_shared 0>; @@ -4851,6 +4888,11 @@ }; }; + sram@c3f0000 { + compatible = "qcom,sdm845-rpmh-stats"; + reg = <0 0x0c3f0000 0 0x400>; + }; + spmi_bus: spmi@c440000 { compatible = "qcom,spmi-pmic-arb"; reg = <0 0x0c440000 0 0x1100>, diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts index a7af1bed4312..be59a8ba9c1f 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts @@ -772,7 +772,7 @@ pinctrl-names = "default"; clock-names = "extclk"; clocks = <&rpmhcc RPMH_LN_BB_CLK2>; - reset-gpios = <&tlmm 64 0>; + reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; vdd-buck-supply = <&vreg_s4a_1p8>; vdd-buck-sido-supply = <&vreg_s4a_1p8>; vdd-tx-supply = <&vreg_s4a_1p8>; diff --git a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts index b0315eeb1320..f954fe5cb61a 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts @@ -704,7 +704,7 @@ pinctrl-names = "default"; clock-names = "extclk"; clocks = <&rpmhcc RPMH_LN_BB_CLK2>; - reset-gpios = <&tlmm 64 0>; + reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; vdd-buck-supply = <&vreg_s4a_1p8>; vdd-buck-sido-supply = <&vreg_s4a_1p8>; vdd-tx-supply = <&vreg_s4a_1p8>; diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts index 0aad2e94e757..6a8b88cc4385 100644 --- a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts +++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts @@ -87,7 +87,7 @@ }; &sdc2_off_state { - sd-cd { + sd-cd-pins { pins = "gpio98"; drive-strength = <2>; bias-disable; @@ -95,7 +95,7 @@ }; &sdc2_on_state { - sd-cd { + sd-cd-pins { pins = "gpio98"; drive-strength = <2>; bias-pull-up; diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi index 8c582a9e4ada..1fe3fa3ad877 100644 --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi @@ -387,19 +387,19 @@ #interrupt-cells = <2>; sdc2_off_state: sdc2-off-state { - clk { + clk-pins { pins = "sdc2_clk"; drive-strength = <2>; bias-disable; }; - cmd { + cmd-pins { pins = "sdc2_cmd"; drive-strength = <2>; bias-pull-up; }; - data { + data-pins { pins = "sdc2_data"; drive-strength = <2>; bias-pull-up; @@ -413,13 +413,13 @@ bias-disable; }; - cmd { + cmd-pins-pins { pins = "sdc2_cmd"; drive-strength = <10>; bias-pull-up; }; - data { + data-pins { pins = "sdc2_data"; drive-strength = <10>; bias-pull-up; diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi index d06aefdf3d9e..c39de7d3ace0 100644 --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi @@ -1,11 +1,14 @@ // SPDX-License-Identifier: BSD-3-Clause /* * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> + * Copyright (c) 2022, Luca Weiss <luca.weiss@fairphone.com> */ #include <dt-bindings/clock/qcom,gcc-sm6350.h> #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interconnect/qcom,sm6350.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/mailbox/qcom-ipcc.h> #include <dt-bindings/power/qcom-rpmpd.h> @@ -517,6 +520,26 @@ }; }; + gpi_dma0: dma-controller@800000 { + compatible = "qcom,sm6350-gpi-dma"; + reg = <0 0x00800000 0 0x60000>; + interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <10>; + dma-channel-mask = <0x1f>; + iommus = <&apps_smmu 0x56 0x0>; + #dma-cells = <3>; + status = "disabled"; + }; + qupv3_id_0: geniqup@8c0000 { compatible = "qcom,geni-se-qup"; reg = <0x0 0x8c0000 0x0 0x2000>; @@ -537,8 +560,15 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c0_default>; interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, + <&gpi_dma0 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &clk_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -550,12 +580,39 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c2_default>; interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, + <&gpi_dma0 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &clk_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; }; + gpi_dma1: dma-controller@900000 { + compatible = "qcom,sm6350-gpi-dma"; + reg = <0 0x00900000 0 0x60000>; + interrupts = <GIC_SPI 645 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 646 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 647 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 648 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 649 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 650 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 651 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 652 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 653 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 654 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <10>; + dma-channel-mask = <0x3f>; + iommus = <&apps_smmu 0x4d6 0x0>; + #dma-cells = <3>; + status = "disabled"; + }; + qupv3_id_1: geniqup@9c0000 { compatible = "qcom,geni-se-qup"; reg = <0x0 0x9c0000 0x0 0x2000>; @@ -576,8 +633,15 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c6_default>; interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, + <&gpi_dma1 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &clk_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -589,8 +653,15 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c7_default>; interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, + <&gpi_dma1 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &clk_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -602,8 +673,15 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c8_default>; interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, + <&gpi_dma1 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &clk_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -615,6 +693,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart9_default>; interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -626,13 +707,67 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c10_default>; interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, + <&gpi_dma1 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &clk_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; }; + config_noc: interconnect@1500000 { + compatible = "qcom,sm6350-config-noc"; + reg = <0 0x01500000 0 0x28000>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect@1620000 { + compatible = "qcom,sm6350-system-noc"; + reg = <0 0x01620000 0 0x17080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + + clk_virt: interconnect-clk-virt { + compatible = "qcom,sm6350-clk-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + }; + + aggre1_noc: interconnect@16e0000 { + compatible = "qcom,sm6350-aggre1-noc"; + reg = <0 0x016e0000 0 0x15080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre2_noc: interconnect@1700000 { + compatible = "qcom,sm6350-aggre2-noc"; + reg = <0 0x01700000 0 0x1f880>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + + compute_noc: interconnect-compute-noc { + compatible = "qcom,sm6350-compute-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + }; + + mmss_noc: interconnect@1740000 { + compatible = "qcom,sm6350-mmss-noc"; + reg = <0 0x01740000 0 0x1c100>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + ufs_mem_hc: ufs@1d84000 { compatible = "qcom,sm6350-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; @@ -933,6 +1068,10 @@ <&gcc GCC_SDCC2_APPS_CLK>, <&rpmhcc RPMH_CXO_CLK>; clock-names = "iface", "core", "xo"; + interconnects = <&aggre2_noc MASTER_SDCC_2 0 &clk_virt SLAVE_EBI_CH0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_SDCC_2 0>; + interconnect-names = "sdhc-ddr", "cpu-sdhc"; + qcom,dll-config = <0x0007642c>; qcom,ddr-config = <0x80040868>; power-domains = <&rpmhpd SM6350_CX>; @@ -947,11 +1086,15 @@ opp-100000000 { opp-hz = /bits/ 64 <100000000>; required-opps = <&rpmhpd_opp_svs_l1>; + opp-peak-kBps = <790000 131000>; + opp-avg-kBps = <50000 50000>; }; opp-202000000 { opp-hz = /bits/ 64 <202000000>; required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <3190000 294000>; + opp-avg-kBps = <261438 300000>; }; }; }; @@ -1017,12 +1160,33 @@ }; }; + dc_noc: interconnect@9160000 { + compatible = "qcom,sm6350-dc-noc"; + reg = <0 0x09160000 0 0x3200>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + system-cache-controller@9200000 { compatible = "qcom,sm6350-llcc"; reg = <0 0x09200000 0 0x50000>, <0 0x09600000 0 0x50000>; reg-names = "llcc_base", "llcc_broadcast_base"; }; + gem_noc: interconnect@9680000 { + compatible = "qcom,sm6350-gem-noc"; + reg = <0 0x09680000 0 0x3e200>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + npu_noc: interconnect@9990000 { + compatible = "qcom,sm6350-npu-noc"; + reg = <0 0x09990000 0 0x1600>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + usb_1: usb@a6f8800 { compatible = "qcom,sm6350-dwc3", "qcom,dwc3"; reg = <0 0x0a6f8800 0 0x400>; @@ -1054,6 +1218,10 @@ resets = <&gcc GCC_USB30_PRIM_BCR>; + interconnects = <&aggre2_noc MASTER_USB3 0 &clk_virt SLAVE_EBI_CH0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3 0>; + interconnect-names = "usb-ddr", "apps-usb"; + usb_1_dwc3: usb@a600000 { compatible = "snps,dwc3"; reg = <0 0x0a600000 0 0xcd00>; @@ -1146,49 +1314,49 @@ #interrupt-cells = <2>; gpio-ranges = <&tlmm 0 0 157>; - qup_uart9_default: qup-uart9-default { + qup_uart9_default: qup-uart9-default-state { pins = "gpio25", "gpio26"; function = "qup13_f2"; drive-strength = <2>; bias-disable; }; - qup_i2c0_default: qup-i2c0-default { + qup_i2c0_default: qup-i2c0-default-state { pins = "gpio0", "gpio1"; function = "qup00"; drive-strength = <2>; bias-pull-up; }; - qup_i2c2_default: qup-i2c2-default { + qup_i2c2_default: qup-i2c2-default-state { pins = "gpio45", "gpio46"; function = "qup02"; drive-strength = <2>; bias-pull-up; }; - qup_i2c6_default: qup-i2c6-default { + qup_i2c6_default: qup-i2c6-default-state { pins = "gpio13", "gpio14"; function = "qup10"; drive-strength = <2>; bias-pull-up; }; - qup_i2c7_default: qup-i2c7-default { + qup_i2c7_default: qup-i2c7-default-state { pins = "gpio27", "gpio28"; function = "qup11"; drive-strength = <2>; bias-pull-up; }; - qup_i2c8_default: qup-i2c8-default { + qup_i2c8_default: qup-i2c8-default-state { pins = "gpio19", "gpio20"; function = "qup12"; drive-strength = <2>; bias-pull-up; }; - qup_i2c10_default: qup-i2c10-default { + qup_i2c10_default: qup-i2c10-default-state { pins = "gpio4", "gpio5"; function = "qup14"; drive-strength = <2>; diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts index c76abe7587b4..30c94fd4fe61 100644 --- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts +++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts @@ -12,6 +12,7 @@ #include "sm7225.dtsi" #include "pm6150l.dtsi" #include "pm6350.dtsi" +#include "pm7250b.dtsi" / { model = "Fairphone 4"; @@ -70,6 +71,36 @@ qcom,vmid = <15>; }; }; + + thermal-zones { + chg-skin-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm7250b_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + conn-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm7250b_adc_tm 1>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + }; }; &adsp { @@ -353,6 +384,42 @@ linux,code = <KEY_VOLUMEDOWN>; }; +&pm7250b_adc { + adc-chan@4d { + reg = <ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "charger_skin_therm"; + }; + + adc-chan@4f { + reg = <ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "conn_therm"; + }; +}; + +&pm7250b_adc_tm { + status = "okay"; + + charger-skin-therm@0 { + reg = <0>; + io-channels = <&pm7250b_adc ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + conn-therm@1 { + reg = <1>; + io-channels = <&pm7250b_adc ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + &qupv3_id_1 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index 7d509ecd44da..cef8c4f4f0ff 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -585,12 +585,6 @@ }; }; - tcsr_mutex: hwlock { - compatible = "qcom,tcsr-mutex"; - syscon = <&tcsr_mutex_regs 0 0x1000>; - #hwlock-cells = <1>; - }; - memory@80000000 { device_type = "memory"; /* We expect the bootloader to fill in the size */ @@ -2054,9 +2048,15 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; - tcsr_mutex_regs: syscon@1f40000 { - compatible = "syscon"; - reg = <0x0 0x01f40000 0x0 0x40000>; + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x01f40000 0x0 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr_regs_1: syscon@1f60000 { + compatible = "qcom,sm8150-tcsr", "syscon"; + reg = <0x0 0x01f60000 0x0 0x20000>; }; remoteproc_slpi: remoteproc@2400000 { @@ -3394,57 +3394,49 @@ compute-cb@1 { compatible = "qcom,fastrpc-compute-cb"; reg = <1>; - iommus = <&apps_smmu 0x1401 0x2040>, - <&apps_smmu 0x1421 0x0>, - <&apps_smmu 0x2001 0x420>, - <&apps_smmu 0x2041 0x0>; + iommus = <&apps_smmu 0x1001 0x0460>; }; compute-cb@2 { compatible = "qcom,fastrpc-compute-cb"; reg = <2>; - iommus = <&apps_smmu 0x2 0x3440>, - <&apps_smmu 0x22 0x3400>; + iommus = <&apps_smmu 0x1002 0x0460>; }; compute-cb@3 { compatible = "qcom,fastrpc-compute-cb"; reg = <3>; - iommus = <&apps_smmu 0x3 0x3440>, - <&apps_smmu 0x1423 0x0>, - <&apps_smmu 0x2023 0x0>; + iommus = <&apps_smmu 0x1003 0x0460>; }; compute-cb@4 { compatible = "qcom,fastrpc-compute-cb"; reg = <4>; - iommus = <&apps_smmu 0x4 0x3440>, - <&apps_smmu 0x24 0x3400>; + iommus = <&apps_smmu 0x1004 0x0460>; }; compute-cb@5 { compatible = "qcom,fastrpc-compute-cb"; reg = <5>; - iommus = <&apps_smmu 0x5 0x3440>, - <&apps_smmu 0x25 0x3400>; + iommus = <&apps_smmu 0x1005 0x0460>; }; compute-cb@6 { compatible = "qcom,fastrpc-compute-cb"; reg = <6>; - iommus = <&apps_smmu 0x6 0x3460>; + iommus = <&apps_smmu 0x1006 0x0460>; }; compute-cb@7 { compatible = "qcom,fastrpc-compute-cb"; reg = <7>; - iommus = <&apps_smmu 0x7 0x3460>; + iommus = <&apps_smmu 0x1007 0x0460>; }; compute-cb@8 { compatible = "qcom,fastrpc-compute-cb"; reg = <8>; - iommus = <&apps_smmu 0x8 0x3460>; + iommus = <&apps_smmu 0x1008 0x0460>; }; /* note: secure cb9 in downstream */ diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts index 7ab3627cc347..a102aa5efa32 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts @@ -635,7 +635,7 @@ wcd938x: codec { compatible = "qcom,wcd9380-codec"; #sound-dai-cells = <1>; - reset-gpios = <&tlmm 32 0>; + reset-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>; vdd-buck-supply = <&vreg_s4a_1p8>; vdd-rxtx-supply = <&vreg_s4a_1p8>; vdd-io-supply = <&vreg_s4a_1p8>; diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index bc773e210023..a5b62cadb129 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -1792,7 +1792,7 @@ }; pcie0: pci@1c00000 { - compatible = "qcom,pcie-sm8250", "snps,dw-pcie"; + compatible = "qcom,pcie-sm8250"; reg = <0 0x01c00000 0 0x3000>, <0 0x60000000 0 0xf1d>, <0 0x60000f20 0 0xa8>, @@ -1810,8 +1810,16 @@ ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>, <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>; - interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", "msi1", "msi2", "msi3", + "msi4", "msi5", "msi6", "msi7"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -1893,7 +1901,7 @@ }; pcie1: pci@1c08000 { - compatible = "qcom,pcie-sm8250", "snps,dw-pcie"; + compatible = "qcom,pcie-sm8250"; reg = <0 0x01c08000 0 0x3000>, <0 0x40000000 0 0xf1d>, <0 0x40000f20 0 0xa8>, @@ -2001,7 +2009,7 @@ }; pcie2: pci@1c10000 { - compatible = "qcom,pcie-sm8250", "snps,dw-pcie"; + compatible = "qcom,pcie-sm8250"; reg = <0 0x01c10000 0 0x3000>, <0 0x64000000 0 0xf1d>, <0 0x64000f20 0 0xa8>, @@ -3571,6 +3579,25 @@ }; }; }; + + dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; }; dsi0_phy: dsi-phy@ae94400 { @@ -3663,25 +3690,6 @@ clock-names = "iface", "ref"; status = "disabled"; - - dsi_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-187500000 { - opp-hz = /bits/ 64 <187500000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-300000000 { - opp-hz = /bits/ 64 <300000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - - opp-358000000 { - opp-hz = /bits/ 64 <358000000>; - required-opps = <&rpmhpd_opp_svs_l1>; - }; - }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi index cb9bbd234b7b..b3c9952ac173 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi @@ -222,8 +222,8 @@ &tlmm { gpio-reserved-ranges = <44 4>; - ts_int_default: ts-int-default { - pin = "gpio23"; + ts_int_default: ts-int-default-state { + pins = "gpio23"; function = "gpio"; drive-strength = <2>; bias-disable; diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index e72a04411888..a86d9ea93b9d 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -1762,150 +1762,150 @@ wakeup-parent = <&pdc>; qup_uart3_default_state: qup-uart3-default-state { - rx { + rx-pins { pins = "gpio18"; function = "qup3"; }; - tx { + tx-pins { pins = "gpio19"; function = "qup3"; }; }; - qup_uart6_default: qup-uart6-default { + qup_uart6_default: qup-uart6-default-state { pins = "gpio30", "gpio31"; function = "qup6"; drive-strength = <2>; bias-disable; }; - qup_uart18_default: qup-uart18-default { + qup_uart18_default: qup-uart18-default-state { pins = "gpio58", "gpio59"; function = "qup18"; drive-strength = <2>; bias-disable; }; - qup_i2c0_default: qup-i2c0-default { + qup_i2c0_default: qup-i2c0-default-state { pins = "gpio4", "gpio5"; function = "qup0"; drive-strength = <2>; bias-pull-up; }; - qup_i2c1_default: qup-i2c1-default { + qup_i2c1_default: qup-i2c1-default-state { pins = "gpio8", "gpio9"; function = "qup1"; drive-strength = <2>; bias-pull-up; }; - qup_i2c2_default: qup-i2c2-default { + qup_i2c2_default: qup-i2c2-default-state { pins = "gpio12", "gpio13"; function = "qup2"; drive-strength = <2>; bias-pull-up; }; - qup_i2c4_default: qup-i2c4-default { + qup_i2c4_default: qup-i2c4-default-state { pins = "gpio20", "gpio21"; function = "qup4"; drive-strength = <2>; bias-pull-up; }; - qup_i2c5_default: qup-i2c5-default { + qup_i2c5_default: qup-i2c5-default-state { pins = "gpio24", "gpio25"; function = "qup5"; drive-strength = <2>; bias-pull-up; }; - qup_i2c6_default: qup-i2c6-default { + qup_i2c6_default: qup-i2c6-default-state { pins = "gpio28", "gpio29"; function = "qup6"; drive-strength = <2>; bias-pull-up; }; - qup_i2c7_default: qup-i2c7-default { + qup_i2c7_default: qup-i2c7-default-state { pins = "gpio32", "gpio33"; function = "qup7"; drive-strength = <2>; bias-disable; }; - qup_i2c8_default: qup-i2c8-default { + qup_i2c8_default: qup-i2c8-default-state { pins = "gpio36", "gpio37"; function = "qup8"; drive-strength = <2>; bias-pull-up; }; - qup_i2c9_default: qup-i2c9-default { + qup_i2c9_default: qup-i2c9-default-state { pins = "gpio40", "gpio41"; function = "qup9"; drive-strength = <2>; bias-pull-up; }; - qup_i2c10_default: qup-i2c10-default { + qup_i2c10_default: qup-i2c10-default-state { pins = "gpio44", "gpio45"; function = "qup10"; drive-strength = <2>; bias-pull-up; }; - qup_i2c11_default: qup-i2c11-default { + qup_i2c11_default: qup-i2c11-default-state { pins = "gpio48", "gpio49"; function = "qup11"; drive-strength = <2>; bias-pull-up; }; - qup_i2c12_default: qup-i2c12-default { + qup_i2c12_default: qup-i2c12-default-state { pins = "gpio52", "gpio53"; function = "qup12"; drive-strength = <2>; bias-pull-up; }; - qup_i2c13_default: qup-i2c13-default { + qup_i2c13_default: qup-i2c13-default-state { pins = "gpio0", "gpio1"; function = "qup13"; drive-strength = <2>; bias-pull-up; }; - qup_i2c14_default: qup-i2c14-default { + qup_i2c14_default: qup-i2c14-default-state { pins = "gpio56", "gpio57"; function = "qup14"; drive-strength = <2>; bias-disable; }; - qup_i2c15_default: qup-i2c15-default { + qup_i2c15_default: qup-i2c15-default-state { pins = "gpio60", "gpio61"; function = "qup15"; drive-strength = <2>; bias-disable; }; - qup_i2c16_default: qup-i2c16-default { + qup_i2c16_default: qup-i2c16-default-state { pins = "gpio64", "gpio65"; function = "qup16"; drive-strength = <2>; bias-disable; }; - qup_i2c17_default: qup-i2c17-default { + qup_i2c17_default: qup-i2c17-default-state { pins = "gpio72", "gpio73"; function = "qup17"; drive-strength = <2>; bias-disable; }; - qup_i2c19_default: qup-i2c19-default { + qup_i2c19_default: qup-i2c19-default-state { pins = "gpio76", "gpio77"; function = "qup19"; drive-strength = <2>; @@ -2128,7 +2128,7 @@ ufs_mem_phy: phy@1d87000 { compatible = "qcom,sm8350-qmp-ufs-phy"; - reg = <0 0x01d87000 0 0xe10>; + reg = <0 0x01d87000 0 0x1c4>; #address-cells = <2>; #size-cells = <2>; ranges; diff --git a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts new file mode 100644 index 000000000000..d68765eb6d4f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts @@ -0,0 +1,634 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org> + */ + +/dts-v1/; + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sm8450.dtsi" + +/delete-node/ &adsp_mem; +/delete-node/ &rmtfs_mem; +/delete-node/ &video_mem; + +/ { + model = "Sony Xperia 1 IV"; + compatible = "sony,pdx223", "qcom,sm8450"; + chassis-type = "handset"; + + aliases { + serial0 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reserved-memory { + adsp_mem: memory@85700000 { + reg = <0x0 0x85700000 0x0 0x2800000>; + no-map; + }; + + video_mem: memory@9fd00000 { + reg = <0x0 0x9fd00000 0x0 0x700000>; + no-map; + }; + + rmtfs_mem: memory@f3300000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0xf3300000 0x0 0x280000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + + ramoops@ffc00000 { + compatible = "ramoops"; + reg = <0 0xffc00000 0 0x200000>; + console-size = <0x40000>; + record-size = <0x1000>; + ecc-size = <16>; + no-map; + }; + }; + + /* Sadly, the voltages for these GPIO regulators are unknown. */ + imx650_vana_vreg: imx650-vana-regulator { + compatible = "regulator-fixed"; + regulator-name = "imx650_vana_vreg"; + gpio = <&tlmm 23 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&apps_rsc { + pm8350-rpmh-regulators { + compatible = "qcom,pm8350-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + + vdd-l1-l4-supply = <&pm8350_s11>; + vdd-l2-l7-supply = <&vreg_bob>; + vdd-l3-l5-supply = <&vreg_bob>; + vdd-l6-l9-l10-supply = <&pm8350_s12>; + + /* + * ARC regulators: + * s5 - gfx.lvl + * l8 - lcx.lvl + */ + + pm8350_s10: smps10 { + regulator-name = "pm8350_s10"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8350_s11: smps11 { + regulator-name = "pm8350_s11"; + regulator-min-microvolt = <848000>; + regulator-max-microvolt = <1104000>; + }; + + pm8350_s12: smps12 { + regulator-name = "pm8350_s12"; + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1400000>; + }; + + pm8350_l1: ldo1 { + regulator-name = "pm8350_l1"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350_l2: ldo2 { + regulator-name = "pm8350_l2"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350_l3: ldo3 { + regulator-name = "pm8350_l3"; + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350_l5: ldo5 { + regulator-name = "pm8350_l5"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350_l6: ldo6 { + regulator-name = "pm8350_l6"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350_l7: ldo7 { + regulator-name = "pm8350_l7"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350_l9: ldo9 { + regulator-name = "pm8350_l9"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pm8350c-rpmh-regulators { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l12-supply = <&vreg_bob>; + vdd-l2-l8-supply = <&vreg_bob>; + vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>; + vdd-l6-l9-l11-supply = <&vreg_bob>; + vdd-l10-supply = <&pm8350_s12>; + + vdd-bob-supply = <&vph_pwr>; + + /* + * ARC regulators: + * s2 - mxc.lvl + * s4 - mss.lvl + * s6 - cx.lvl + */ + + pm8350c_s1: smps1 { + regulator-name = "pm8350c_s1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2024000>; + }; + + pm8350c_s10: smps10 { + regulator-name = "pm8350c_s10"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + }; + + vreg_bob: bob { + regulator-name = "vreg_bob"; + regulator-min-microvolt = <3400000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + }; + + pm8350c_l1: ldo1 { + regulator-name = "pm8350c_l1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l2: ldo2 { + regulator-name = "pm8350c_l2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l3: ldo3 { + regulator-name = "pm8350c_l3"; + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l4: ldo4 { + regulator-name = "pm8350c_l4"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l5: ldo5 { + regulator-name = "pm8350c_l5"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l6: ldo6 { + regulator-name = "pm8350c_l6"; + regulator-min-microvolt = <2960000>; + /* Originally max = 3008000 but SDHCI expects 2960000 */ + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l7: ldo7 { + regulator-name = "pm8350c_l7"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l8: ldo8 { + regulator-name = "pm8350c_l8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l9: ldo9 { + regulator-name = "pm8350c_l9"; + regulator-min-microvolt = <2960000>; + /* Originally max = 3008000 but SDHCI expects 2960000 */ + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l10: ldo10 { + regulator-name = "pm8350c_l10"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l12: ldo12 { + regulator-name = "pm8350c_l12"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1968000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l13: ldo13 { + regulator-name = "pm8350c_l13"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pm8450-rpmh-regulators { + compatible = "qcom,pm8450-rpmh-regulators"; + qcom,pmic-id = "h"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + + vdd-l2-supply = <&vreg_bob>; + vdd-l3-supply = <&vreg_bob>; + vdd-l4-supply = <&vreg_bob>; + + /* + * ARC regulators: + * S2 - ebi.lvl + * S4 - mmcx.lvl + * S6 - mx.lvl + * L1 - lmx.lvl + */ + + pm8450_s3: smps3 { + regulator-name = "pm8450_s3"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <600000>; + }; + + pm8450_l2: ldo2 { + regulator-name = "pm8450_l2"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8450_l3: ldo3 { + regulator-name = "pm8450_l3"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pmr735a-rpmh-regulators { + compatible = "qcom,pmr735a-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + + vdd-l1-l2-supply = <&pmr735a_s2>; + vdd-l3-supply = <&pmr735a_s1>; + vdd-l4-supply = <&pm8350c_s1>; + vdd-l5-l6-supply = <&pm8350c_s1>; + vdd-l7-bob-supply = <&vreg_bob>; + + pmr735a_s1: smps1 { + regulator-name = "pmr735a_s1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1296000>; + }; + + pmr735a_s2: smps2 { + regulator-name = "pmr735a_s2"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1040000>; + }; + + pmr735a_s3: smps3 { + regulator-name = "pmr735a_s3"; + regulator-min-microvolt = <435000>; + regulator-max-microvolt = <2352000>; + }; + + pmr735a_l1: ldo1 { + regulator-name = "pmr735a_l1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + pmr735a_l2: ldo2 { + regulator-name = "pmr735a_l2"; + regulator-min-microvolt = <480000>; + regulator-max-microvolt = <912000>; + }; + + pmr735a_l3: ldo3 { + regulator-name = "pmr735a_l3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pmr735a_l4: ldo4 { + regulator-name = "pmr735a_l4"; + regulator-min-microvolt = <1776000>; + regulator-max-microvolt = <1776000>; + }; + + pmr735a_l5: ldo5 { + regulator-name = "pmr735a_l5"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + }; + + pmr735a_l6: ldo6 { + regulator-name = "pmr735a_l6"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pmr735a_l7: ldo7 { + regulator-name = "pmr735a_l7"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + }; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&gpi_dma2 { + status = "okay"; +}; + +/* I2C4 is used, it hosts a Samsung touchscreen, but GPI DMA is broken.. */ + +&i2c5 { + clock-frequency = <400000>; + status = "okay"; + + /* Dialog SLG51000 CMIC @ 75 */ +}; + +&i2c9 { + clock-frequency = <400000>; + status = "okay"; + + /* NXP SN1X0 NFC @ 28 */ +}; + +&i2c13 { + clock-frequency = <400000>; + status = "okay"; + + /* Richwave RTC6226 FM Radio Receiver @ 64 */ +}; + +&i2c14 { + clock-frequency = <1000000>; + status = "okay"; + + cs35l41_l: speaker-amp@40 { + compatible = "cirrus,cs35l41"; + reg = <0x40>; + interrupt-parent = <&tlmm>; + interrupts = <182 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>; + cirrus,boost-peak-milliamp = <4000>; + cirrus,boost-ind-nanohenry = <1000>; + cirrus,boost-cap-microfarad = <15>; + cirrus,gpio2-src-select = <2>; + cirrus,gpio2-output-enable; + cirrus,asp-sdout-hiz = <3>; + #sound-dai-cells = <1>; + }; + + cs35l41_r: speaker-amp@41 { + compatible = "cirrus,cs35l41"; + reg = <0x41>; + interrupt-parent = <&tlmm>; + interrupts = <182 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>; + cirrus,boost-peak-milliamp = <4000>; + cirrus,boost-ind-nanohenry = <1000>; + cirrus,boost-cap-microfarad = <15>; + cirrus,gpio2-src-select = <2>; + cirrus,gpio2-output-enable; + cirrus,asp-sdout-hiz = <3>; + #sound-dai-cells = <1>; + }; +}; + +&i2c15 { + clock-frequency = <400000>; + status = "okay"; + + /* AMS TCS3490 RGB+IR color sensor @ 72 */ +}; + +&i2c19 { + clock-frequency = <1000000>; + status = "okay"; + + /* Cirrus Logic CS40L25A boosted haptics driver @ 40 */ +}; + +&pcie0 { + max-link-speed = <2>; + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&pm8350_l5>; + vdda-pll-supply = <&pm8350_l6>; + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/adsp.mbn"; + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/cdsp.mbn"; + status = "okay"; +}; + +&remoteproc_slpi { + firmware-name = "qcom/slpi.mbn"; + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qupv3_id_2 { + status = "okay"; +}; + +&sdhc_2 { + cd-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>; + pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_n>; + vmmc-supply = <&pm8350c_l9>; + vqmmc-supply = <&pm8350c_l6>; + /* Forbid SDR104/SDR50 - broken hw! */ + sdhci-caps-mask = <0x3 0x0>; + no-sdio; + no-mmc; + status = "okay"; +}; + +&spi10 { + status = "okay"; + + /* NXP SN1X0 NFC Secure Element @ 0 */ +}; + +&tlmm { + gpio-reserved-ranges = <28 4>; + + sdc2_default_state: sdc2-default-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <16>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <16>; + bias-pull-up; + }; + }; + + ts_int_default: ts-int-default-state { + pins = "gpio23"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + input-enable; + }; + + sdc2_card_det_n: sd-card-det-n-state { + pins = "gpio92"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +&uart7 { + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&pm8350_l5>; + vdda18-supply = <&pm8350c_l1>; + vdda33-supply = <&pm8350_l2>; + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&pm8350_l6>; + vdda-pll-supply = <&pm8350_l1>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index 4978c5ba5dd0..d32f08df743d 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -438,11 +438,6 @@ no-map; }; - camera_mem: memory@85200000 { - reg = <0x0 0x85200000 0x0 0x500000>; - no-map; - }; - video_mem: memory@85700000 { reg = <0x0 0x85700000 0x0 0x700000>; no-map; @@ -505,6 +500,11 @@ no-map; }; + camera_mem: memory@9f500000 { + reg = <0x0 0x9f500000 0x0 0x800000>; + no-map; + }; + rmtfs_mem: memory@9fd00000 { compatible = "qcom,rmtfs-mem"; reg = <0x0 0x9fd00000 0x0 0x280000>; @@ -514,6 +514,11 @@ qcom,vmid = <15>; }; + xbl_sc_mem2: memory@a6e00000 { + reg = <0x0 0xa6e00000 0x0 0x40000>; + no-map; + }; + global_sync_mem: memory@a6f00000 { reg = <0x0 0xa6f00000 0x0 0x100000>; no-map; @@ -2379,22 +2384,42 @@ gpio-ranges = <&tlmm 0 0 211>; wakeup-parent = <&pdc>; + sdc2_sleep_state: sdc2-sleep-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <2>; + bias-pull-up; + }; + }; + pcie0_default_state: pcie0-default-state { - perst { + perst-pins { pins = "gpio94"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; - clkreq { + clkreq-pins { pins = "gpio95"; function = "pcie0_clkreqn"; drive-strength = <2>; bias-pull-up; }; - wake { + wake-pins { pins = "gpio96"; function = "gpio"; drive-strength = <2>; @@ -2403,21 +2428,21 @@ }; pcie1_default_state: pcie1-default-state { - perst { + perst-pins { pins = "gpio97"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; - clkreq { + clkreq-pins { pins = "gpio98"; function = "pcie1_clkreqn"; drive-strength = <2>; bias-pull-up; }; - wake { + wake-pins { pins = "gpio99"; function = "gpio"; drive-strength = <2>; @@ -2425,350 +2450,350 @@ }; }; - qup_i2c0_data_clk: qup-i2c0-data-clk { + qup_i2c0_data_clk: qup-i2c0-data-clk-state { pins = "gpio0", "gpio1"; function = "qup0"; }; - qup_i2c1_data_clk: qup-i2c1-data-clk { + qup_i2c1_data_clk: qup-i2c1-data-clk-state { pins = "gpio4", "gpio5"; function = "qup1"; }; - qup_i2c2_data_clk: qup-i2c2-data-clk { + qup_i2c2_data_clk: qup-i2c2-data-clk-state { pins = "gpio8", "gpio9"; function = "qup2"; }; - qup_i2c3_data_clk: qup-i2c3-data-clk { + qup_i2c3_data_clk: qup-i2c3-data-clk-state { pins = "gpio12", "gpio13"; function = "qup3"; }; - qup_i2c4_data_clk: qup-i2c4-data-clk { + qup_i2c4_data_clk: qup-i2c4-data-clk-state { pins = "gpio16", "gpio17"; function = "qup4"; }; - qup_i2c5_data_clk: qup-i2c5-data-clk { + qup_i2c5_data_clk: qup-i2c5-data-clk-state { pins = "gpio206", "gpio207"; function = "qup5"; }; - qup_i2c6_data_clk: qup-i2c6-data-clk { + qup_i2c6_data_clk: qup-i2c6-data-clk-state { pins = "gpio20", "gpio21"; function = "qup6"; }; - qup_i2c8_data_clk: qup-i2c8-data-clk { + qup_i2c8_data_clk: qup-i2c8-data-clk-state { pins = "gpio28", "gpio29"; function = "qup8"; }; - qup_i2c9_data_clk: qup-i2c9-data-clk { + qup_i2c9_data_clk: qup-i2c9-data-clk-state { pins = "gpio32", "gpio33"; function = "qup9"; }; - qup_i2c10_data_clk: qup-i2c10-data-clk { + qup_i2c10_data_clk: qup-i2c10-data-clk-state { pins = "gpio36", "gpio37"; function = "qup10"; }; - qup_i2c11_data_clk: qup-i2c11-data-clk { + qup_i2c11_data_clk: qup-i2c11-data-clk-state { pins = "gpio40", "gpio41"; function = "qup11"; }; - qup_i2c12_data_clk: qup-i2c12-data-clk { + qup_i2c12_data_clk: qup-i2c12-data-clk-state { pins = "gpio44", "gpio45"; function = "qup12"; }; - qup_i2c13_data_clk: qup-i2c13-data-clk { + qup_i2c13_data_clk: qup-i2c13-data-clk-state { pins = "gpio48", "gpio49"; function = "qup13"; drive-strength = <2>; bias-pull-up; }; - qup_i2c14_data_clk: qup-i2c14-data-clk { + qup_i2c14_data_clk: qup-i2c14-data-clk-state { pins = "gpio52", "gpio53"; function = "qup14"; drive-strength = <2>; bias-pull-up; }; - qup_i2c15_data_clk: qup-i2c15-data-clk { + qup_i2c15_data_clk: qup-i2c15-data-clk-state { pins = "gpio56", "gpio57"; function = "qup15"; }; - qup_i2c16_data_clk: qup-i2c16-data-clk { + qup_i2c16_data_clk: qup-i2c16-data-clk-state { pins = "gpio60", "gpio61"; function = "qup16"; }; - qup_i2c17_data_clk: qup-i2c17-data-clk { + qup_i2c17_data_clk: qup-i2c17-data-clk-state { pins = "gpio64", "gpio65"; function = "qup17"; }; - qup_i2c18_data_clk: qup-i2c18-data-clk { + qup_i2c18_data_clk: qup-i2c18-data-clk-state { pins = "gpio68", "gpio69"; function = "qup18"; }; - qup_i2c19_data_clk: qup-i2c19-data-clk { + qup_i2c19_data_clk: qup-i2c19-data-clk-state { pins = "gpio72", "gpio73"; function = "qup19"; }; - qup_i2c20_data_clk: qup-i2c20-data-clk { + qup_i2c20_data_clk: qup-i2c20-data-clk-state { pins = "gpio76", "gpio77"; function = "qup20"; }; - qup_i2c21_data_clk: qup-i2c21-data-clk { + qup_i2c21_data_clk: qup-i2c21-data-clk-state { pins = "gpio80", "gpio81"; function = "qup21"; }; - qup_spi0_cs: qup-spi0-cs { + qup_spi0_cs: qup-spi0-cs-state { pins = "gpio3"; function = "qup0"; }; - qup_spi0_data_clk: qup-spi0-data-clk { + qup_spi0_data_clk: qup-spi0-data-clk-state { pins = "gpio0", "gpio1", "gpio2"; function = "qup0"; }; - qup_spi1_cs: qup-spi1-cs { + qup_spi1_cs: qup-spi1-cs-state { pins = "gpio7"; function = "qup1"; }; - qup_spi1_data_clk: qup-spi1-data-clk { + qup_spi1_data_clk: qup-spi1-data-clk-state { pins = "gpio4", "gpio5", "gpio6"; function = "qup1"; }; - qup_spi2_cs: qup-spi2-cs { + qup_spi2_cs: qup-spi2-cs-state { pins = "gpio11"; function = "qup2"; }; - qup_spi2_data_clk: qup-spi2-data-clk { + qup_spi2_data_clk: qup-spi2-data-clk-state { pins = "gpio8", "gpio9", "gpio10"; function = "qup2"; }; - qup_spi3_cs: qup-spi3-cs { + qup_spi3_cs: qup-spi3-cs-state { pins = "gpio15"; function = "qup3"; }; - qup_spi3_data_clk: qup-spi3-data-clk { + qup_spi3_data_clk: qup-spi3-data-clk-state { pins = "gpio12", "gpio13", "gpio14"; function = "qup3"; }; - qup_spi4_cs: qup-spi4-cs { + qup_spi4_cs: qup-spi4-cs-state { pins = "gpio19"; function = "qup4"; drive-strength = <6>; bias-disable; }; - qup_spi4_data_clk: qup-spi4-data-clk { + qup_spi4_data_clk: qup-spi4-data-clk-state { pins = "gpio16", "gpio17", "gpio18"; function = "qup4"; }; - qup_spi5_cs: qup-spi5-cs { + qup_spi5_cs: qup-spi5-cs-state { pins = "gpio85"; function = "qup5"; }; - qup_spi5_data_clk: qup-spi5-data-clk { + qup_spi5_data_clk: qup-spi5-data-clk-state { pins = "gpio206", "gpio207", "gpio84"; function = "qup5"; }; - qup_spi6_cs: qup-spi6-cs { + qup_spi6_cs: qup-spi6-cs-state { pins = "gpio23"; function = "qup6"; }; - qup_spi6_data_clk: qup-spi6-data-clk { + qup_spi6_data_clk: qup-spi6-data-clk-state { pins = "gpio20", "gpio21", "gpio22"; function = "qup6"; }; - qup_spi8_cs: qup-spi8-cs { + qup_spi8_cs: qup-spi8-cs-state { pins = "gpio31"; function = "qup8"; }; - qup_spi8_data_clk: qup-spi8-data-clk { + qup_spi8_data_clk: qup-spi8-data-clk-state { pins = "gpio28", "gpio29", "gpio30"; function = "qup8"; }; - qup_spi9_cs: qup-spi9-cs { + qup_spi9_cs: qup-spi9-cs-state { pins = "gpio35"; function = "qup9"; }; - qup_spi9_data_clk: qup-spi9-data-clk { + qup_spi9_data_clk: qup-spi9-data-clk-state { pins = "gpio32", "gpio33", "gpio34"; function = "qup9"; }; - qup_spi10_cs: qup-spi10-cs { + qup_spi10_cs: qup-spi10-cs-state { pins = "gpio39"; function = "qup10"; }; - qup_spi10_data_clk: qup-spi10-data-clk { + qup_spi10_data_clk: qup-spi10-data-clk-state { pins = "gpio36", "gpio37", "gpio38"; function = "qup10"; }; - qup_spi11_cs: qup-spi11-cs { + qup_spi11_cs: qup-spi11-cs-state { pins = "gpio43"; function = "qup11"; }; - qup_spi11_data_clk: qup-spi11-data-clk { + qup_spi11_data_clk: qup-spi11-data-clk-state { pins = "gpio40", "gpio41", "gpio42"; function = "qup11"; }; - qup_spi12_cs: qup-spi12-cs { + qup_spi12_cs: qup-spi12-cs-state { pins = "gpio47"; function = "qup12"; }; - qup_spi12_data_clk: qup-spi12-data-clk { + qup_spi12_data_clk: qup-spi12-data-clk-state { pins = "gpio44", "gpio45", "gpio46"; function = "qup12"; }; - qup_spi13_cs: qup-spi13-cs { + qup_spi13_cs: qup-spi13-cs-state { pins = "gpio51"; function = "qup13"; }; - qup_spi13_data_clk: qup-spi13-data-clk { + qup_spi13_data_clk: qup-spi13-data-clk-state { pins = "gpio48", "gpio49", "gpio50"; function = "qup13"; }; - qup_spi14_cs: qup-spi14-cs { + qup_spi14_cs: qup-spi14-cs-state { pins = "gpio55"; function = "qup14"; }; - qup_spi14_data_clk: qup-spi14-data-clk { + qup_spi14_data_clk: qup-spi14-data-clk-state { pins = "gpio52", "gpio53", "gpio54"; function = "qup14"; }; - qup_spi15_cs: qup-spi15-cs { + qup_spi15_cs: qup-spi15-cs-state { pins = "gpio59"; function = "qup15"; }; - qup_spi15_data_clk: qup-spi15-data-clk { + qup_spi15_data_clk: qup-spi15-data-clk-state { pins = "gpio56", "gpio57", "gpio58"; function = "qup15"; }; - qup_spi16_cs: qup-spi16-cs { + qup_spi16_cs: qup-spi16-cs-state { pins = "gpio63"; function = "qup16"; }; - qup_spi16_data_clk: qup-spi16-data-clk { + qup_spi16_data_clk: qup-spi16-data-clk-state { pins = "gpio60", "gpio61", "gpio62"; function = "qup16"; }; - qup_spi17_cs: qup-spi17-cs { + qup_spi17_cs: qup-spi17-cs-state { pins = "gpio67"; function = "qup17"; }; - qup_spi17_data_clk: qup-spi17-data-clk { + qup_spi17_data_clk: qup-spi17-data-clk-state { pins = "gpio64", "gpio65", "gpio66"; function = "qup17"; }; - qup_spi18_cs: qup-spi18-cs { + qup_spi18_cs: qup-spi18-cs-state { pins = "gpio71"; function = "qup18"; drive-strength = <6>; bias-disable; }; - qup_spi18_data_clk: qup-spi18-data-clk { + qup_spi18_data_clk: qup-spi18-data-clk-state { pins = "gpio68", "gpio69", "gpio70"; function = "qup18"; drive-strength = <6>; bias-disable; }; - qup_spi19_cs: qup-spi19-cs { + qup_spi19_cs: qup-spi19-cs-state { pins = "gpio75"; function = "qup19"; drive-strength = <6>; bias-disable; }; - qup_spi19_data_clk: qup-spi19-data-clk { + qup_spi19_data_clk: qup-spi19-data-clk-state { pins = "gpio72", "gpio73", "gpio74"; function = "qup19"; drive-strength = <6>; bias-disable; }; - qup_spi20_cs: qup-spi20-cs { + qup_spi20_cs: qup-spi20-cs-state { pins = "gpio79"; function = "qup20"; }; - qup_spi20_data_clk: qup-spi20-data-clk { + qup_spi20_data_clk: qup-spi20-data-clk-state { pins = "gpio76", "gpio77", "gpio78"; function = "qup20"; }; - qup_spi21_cs: qup-spi21-cs { + qup_spi21_cs: qup-spi21-cs-state { pins = "gpio83"; function = "qup21"; }; - qup_spi21_data_clk: qup-spi21-data-clk { + qup_spi21_data_clk: qup-spi21-data-clk-state { pins = "gpio80", "gpio81", "gpio82"; function = "qup21"; }; - qup_uart7_rx: qup-uart7-rx { + qup_uart7_rx: qup-uart7-rx-state { pins = "gpio26"; function = "qup7"; drive-strength = <2>; bias-disable; }; - qup_uart7_tx: qup-uart7-tx { + qup_uart7_tx: qup-uart7-tx-state { pins = "gpio27"; function = "qup7"; drive-strength = <2>; bias-disable; }; - qup_uart20_default: qup-uart20-default { + qup_uart20_default: qup-uart20-default-state { pins = "gpio76", "gpio77", "gpio78", "gpio79"; function = "qup20"; }; @@ -3069,7 +3094,9 @@ ufs_mem_hc: ufshc@1d84000 { compatible = "qcom,sm8450-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; - reg = <0 0x01d84000 0 0x3000>; + reg = <0 0x01d84000 0 0x3000>, + <0 0x01d88000 0 0x8000>; + reg-names = "std", "ice"; interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; phys = <&ufs_mem_phy_lanes>; phy-names = "ufsphy"; @@ -3093,7 +3120,8 @@ "ref_clk", "tx_lane0_sync_clk", "rx_lane0_sync_clk", - "rx_lane1_sync_clk"; + "rx_lane1_sync_clk", + "ice_core_clk"; clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, @@ -3102,7 +3130,8 @@ <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, - <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>, + <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; freq-table-hz = <75000000 300000000>, <0 0>, @@ -3111,13 +3140,14 @@ <75000000 300000000>, <0 0>, <0 0>, - <0 0>; + <0 0>, + <75000000 300000000>; status = "disabled"; }; ufs_mem_phy: phy@1d87000 { compatible = "qcom,sm8450-qmp-ufs-phy"; - reg = <0 0x01d87000 0 0xe10>; + reg = <0 0x01d87000 0 0x1c4>; #address-cells = <2>; #size-cells = <2>; ranges; @@ -3140,6 +3170,45 @@ }; }; + sdhc_2: sdhci@8804000 { + compatible = "qcom,sm8450-sdhci", "qcom,sdhci-msm-v5"; + reg = <0 0x08804000 0 0x1000>; + + interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "core", "xo"; + resets = <&gcc GCC_SDCC2_BCR>; + interconnects = <&aggre2_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>; + interconnect-names = "sdhc-ddr","cpu-sdhc"; + iommus = <&apps_smmu 0x4a0 0x0>; + power-domains = <&rpmhpd SM8450_CX>; + operating-points-v2 = <&sdhc2_opp_table>; + bus-width = <4>; + dma-coherent; + + status = "disabled"; + + sdhc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + usb_1: usb@a6f8800 { compatible = "qcom,sm8450-dwc3", "qcom,dwc3"; reg = <0 0x0a6f8800 0 0x400>; diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index 7a647860ef35..0699b51c1247 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -56,6 +56,7 @@ dtb-$(CONFIG_ARCH_R8A77970) += r8a77970-v3msk.dtb dtb-$(CONFIG_ARCH_R8A77980) += r8a77980-condor.dtb dtb-$(CONFIG_ARCH_R8A77980) += r8a77980-v3hsk.dtb +dtb-$(CONFIG_ARCH_R8A77980) += r8a77980a-condor-i.dtb dtb-$(CONFIG_ARCH_R8A77990) += r8a77990-ebisu.dtb diff --git a/arch/arm64/boot/dts/renesas/condor-common.dtsi b/arch/arm64/boot/dts/renesas/condor-common.dtsi new file mode 100644 index 000000000000..dfbe35bf46e0 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/condor-common.dtsi @@ -0,0 +1,548 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the Condor board with R-Car V3H + * + * Copyright (C) 2018 Renesas Electronics Corp. + * Copyright (C) 2018 Cogent Embedded, Inc. + */ +#include <dt-bindings/gpio/gpio.h> + +/ { + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + serial0 = &scif0; + ethernet0 = &gether; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + d1_8v: regulator-2 { + compatible = "regulator-fixed"; + regulator-name = "D1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + d3_3v: regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "D3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&adv7511_out>; + }; + }; + }; + + lvds-decoder { + compatible = "thine,thc63lvd1024"; + vcc-supply = <&d3_3v>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + thc63lvd1024_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + + port@2 { + reg = <2>; + thc63lvd1024_out: endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; + }; + }; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0 0x48000000 0 0x78000000>; + }; + + vddq_vin01: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "VDDQ_VIN01"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + x1_clk: x1-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <148500000>; + }; +}; + +&canfd { + pinctrl-0 = <&canfd0_pins>; + pinctrl-names = "default"; + status = "okay"; + + channel0 { + status = "okay"; + }; +}; + +&csi40 { + status = "okay"; + + ports { + port@0 { + csi40_in: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&max9286_out0>; + }; + }; + }; +}; + +&csi41 { + status = "okay"; + + ports { + port@0 { + csi41_in: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&max9286_out1>; + }; + }; + }; +}; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&x1_clk>; + clock-names = "du.0", "dclkin.0"; + status = "okay"; +}; + +&extal_clk { + clock-frequency = <16666666>; +}; + +&extalr_clk { + clock-frequency = <32768>; +}; + +&gether { + pinctrl-0 = <&gether_pins>; + pinctrl-names = "default"; + + phy-mode = "rgmii-id"; + phy-handle = <&phy0>; + renesas,no-ether-link; + status = "okay"; + + phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; + rxc-skew-ps = <1500>; + reg = <0>; + interrupt-parent = <&gpio4>; + interrupts = <23 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; + }; +}; + +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + io_expander0: gpio@20 { + compatible = "onnn,pca9654"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + io_expander1: gpio@21 { + compatible = "onnn,pca9654"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + + hdmi@39 { + compatible = "adi,adv7511w"; + reg = <0x39>; + interrupt-parent = <&gpio1>; + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; + avdd-supply = <&d1_8v>; + dvdd-supply = <&d1_8v>; + pvdd-supply = <&d1_8v>; + bgvdd-supply = <&d1_8v>; + dvdd-3v-supply = <&d3_3v>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&thc63lvd1024_out>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; +}; + +&i2c1 { + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + gmsl0: gmsl-deserializer@48 { + compatible = "maxim,max9286"; + reg = <0x48>; + + maxim,gpio-poc = <0 GPIO_ACTIVE_LOW>; + enable-gpios = <&io_expander0 0 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + }; + + port@2 { + reg = <2>; + }; + + port@3 { + reg = <3>; + }; + + port@4 { + reg = <4>; + max9286_out0: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&csi40_in>; + }; + }; + }; + + i2c-mux { + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + status = "disabled"; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + status = "disabled"; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + status = "disabled"; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + status = "disabled"; + }; + }; + }; + + gmsl1: gmsl-deserializer@4a { + compatible = "maxim,max9286"; + reg = <0x4a>; + + maxim,gpio-poc = <0 GPIO_ACTIVE_LOW>; + enable-gpios = <&io_expander1 0 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + }; + + port@2 { + reg = <2>; + }; + + port@3 { + reg = <3>; + }; + + port@4 { + reg = <4>; + max9286_out1: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&csi41_in>; + }; + }; + }; + + i2c-mux { + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + status = "disabled"; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + status = "disabled"; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + status = "disabled"; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + status = "disabled"; + }; + }; + }; +}; + +&lvds0 { + status = "okay"; + + ports { + port@1 { + lvds0_out: endpoint { + remote-endpoint = <&thc63lvd1024_in>; + }; + }; + }; +}; + +&mmc0 { + pinctrl-0 = <&mmc_pins>; + pinctrl-1 = <&mmc_pins>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <&d3_3v>; + vqmmc-supply = <&vddq_vin01>; + mmc-hs200-1_8v; + bus-width = <8>; + no-sd; + no-sdio; + non-removable; + status = "okay"; +}; + +&pciec { + status = "okay"; +}; + +&pcie_bus_clk { + clock-frequency = <100000000>; +}; + +&pcie_phy { + status = "okay"; +}; + +&pfc { + canfd0_pins: canfd0 { + groups = "canfd0_data_a"; + function = "canfd0"; + }; + + gether_pins: gether { + groups = "gether_mdio_a", "gether_rgmii", + "gether_txcrefclk", "gether_txcrefclk_mega"; + function = "gether"; + }; + + i2c0_pins: i2c0 { + groups = "i2c0"; + function = "i2c0"; + }; + + i2c1_pins: i2c1 { + groups = "i2c1"; + function = "i2c1"; + }; + + mmc_pins: mmc { + groups = "mmc_data8", "mmc_ctrl", "mmc_ds"; + function = "mmc"; + power-source = <1800>; + }; + + qspi0_pins: qspi0 { + groups = "qspi0_ctrl", "qspi0_data4"; + function = "qspi0"; + }; + + scif0_pins: scif0 { + groups = "scif0_data"; + function = "scif0"; + }; + + scif_clk_pins: scif_clk { + groups = "scif_clk_b"; + function = "scif_clk"; + }; +}; + +&rpc { + pinctrl-0 = <&qspi0_pins>; + pinctrl-names = "default"; + + status = "okay"; + + flash@0 { + compatible = "spansion,s25fs512s", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + bootparam@0 { + reg = <0x00000000 0x040000>; + read-only; + }; + cr7@40000 { + reg = <0x00040000 0x080000>; + read-only; + }; + cert_header_sa3@c0000 { + reg = <0x000c0000 0x080000>; + read-only; + }; + bl2@140000 { + reg = <0x00140000 0x040000>; + read-only; + }; + cert_header_sa6@180000 { + reg = <0x00180000 0x040000>; + read-only; + }; + bl31@1c0000 { + reg = <0x001c0000 0x460000>; + read-only; + }; + uboot@640000 { + reg = <0x00640000 0x0c0000>; + read-only; + }; + uboot-env@700000 { + reg = <0x00700000 0x040000>; + read-only; + }; + dtb@740000 { + reg = <0x00740000 0x080000>; + }; + kernel@7c0000 { + reg = <0x007c0000 0x1400000>; + }; + user@1bc0000 { + reg = <0x01bc0000 0x2440000>; + }; + }; + }; +}; + +&rwdt { + timeout-sec = <60>; + status = "okay"; +}; + +&scif0 { + pinctrl-0 = <&scif0_pins>, <&scif_clk_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&scif_clk { + clock-frequency = <14745600>; +}; diff --git a/arch/arm64/boot/dts/renesas/ebisu.dtsi b/arch/arm64/boot/dts/renesas/ebisu.dtsi index 8fc03491a11c..bbc29452d1be 100644 --- a/arch/arm64/boot/dts/renesas/ebisu.dtsi +++ b/arch/arm64/boot/dts/renesas/ebisu.dtsi @@ -13,6 +13,14 @@ compatible = "renesas,ebisu"; aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; serial0 = &scif2; ethernet0 = &avb; mmc0 = &sdhi3; diff --git a/arch/arm64/boot/dts/renesas/hihope-common.dtsi b/arch/arm64/boot/dts/renesas/hihope-common.dtsi index b062f41ee270..83104af2813e 100644 --- a/arch/arm64/boot/dts/renesas/hihope-common.dtsi +++ b/arch/arm64/boot/dts/renesas/hihope-common.dtsi @@ -10,6 +10,14 @@ / { aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &iic_pmic; serial0 = &scif2; serial1 = &hscif0; mmc0 = &sdhi3; diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts b/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts index 3cf2e076940f..9ae67263c0df 100644 --- a/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts +++ b/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts @@ -14,6 +14,14 @@ compatible = "beacon,beacon-rzg2m", "renesas,r8a774a1"; aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &iic_pmic; serial0 = &scif2; serial1 = &hscif0; serial2 = &hscif1; diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi index e7d17776624d..7e643243c3be 100644 --- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi @@ -17,17 +17,6 @@ #address-cells = <2>; #size-cells = <2>; - aliases { - i2c0 = &i2c0; - i2c1 = &i2c1; - i2c2 = &i2c2; - i2c3 = &i2c3; - i2c4 = &i2c4; - i2c5 = &i2c5; - i2c6 = &i2c6; - i2c7 = &iic_pmic; - }; - /* * The external audio clocks are configured as 0 Hz fixed frequency * clocks by default. @@ -2334,7 +2323,6 @@ reg-names = "regs", "dirmap", "wbuf"; interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 917>; - clock-names = "rpc"; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 917>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi index f62d95760e82..d541b48c7e38 100644 --- a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi @@ -2191,7 +2191,6 @@ reg-names = "regs", "dirmap", "wbuf"; interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 917>; - clock-names = "rpc"; power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; resets = <&cpg 917>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi index c563d26a7a71..151e32ac0368 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi @@ -1671,7 +1671,6 @@ reg-names = "regs", "dirmap", "wbuf"; interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 917>; - clock-names = "rpc"; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; resets = <&cpg 917>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi index 8ec59094882b..c5a0e7866b2f 100644 --- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi @@ -769,7 +769,7 @@ status = "disabled"; }; - i2c_dvfs: i2c@e60b0000 { + iic_pmic: i2c@e60b0000 { #address-cells = <1>; #size-cells = <0>; compatible = "renesas,iic-r8a774e1", @@ -2423,7 +2423,6 @@ reg-names = "regs", "dirmap", "wbuf"; interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 917>; - clock-names = "rpc"; power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; resets = <&cpg 917>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/renesas/r8a77951.dtsi b/arch/arm64/boot/dts/renesas/r8a77951.dtsi index a297af22a195..07c8763c1e77 100644 --- a/arch/arm64/boot/dts/renesas/r8a77951.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77951.dtsi @@ -21,17 +21,6 @@ #address-cells = <2>; #size-cells = <2>; - aliases { - i2c0 = &i2c0; - i2c1 = &i2c1; - i2c2 = &i2c2; - i2c3 = &i2c3; - i2c4 = &i2c4; - i2c5 = &i2c5; - i2c6 = &i2c6; - i2c7 = &i2c_dvfs; - }; - /* * The external audio clocks are configured as 0 Hz fixed frequency * clocks by default. diff --git a/arch/arm64/boot/dts/renesas/r8a77960.dtsi b/arch/arm64/boot/dts/renesas/r8a77960.dtsi index 4159c23d3874..1424d4ad941f 100644 --- a/arch/arm64/boot/dts/renesas/r8a77960.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77960.dtsi @@ -16,17 +16,6 @@ #address-cells = <2>; #size-cells = <2>; - aliases { - i2c0 = &i2c0; - i2c1 = &i2c1; - i2c2 = &i2c2; - i2c3 = &i2c3; - i2c4 = &i2c4; - i2c5 = &i2c5; - i2c6 = &i2c6; - i2c7 = &i2c_dvfs; - }; - /* * The external audio clocks are configured as 0 Hz fixed frequency * clocks by default. diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi index 21a5e1cdd9f1..997f29521f66 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi @@ -21,17 +21,6 @@ #address-cells = <2>; #size-cells = <2>; - aliases { - i2c0 = &i2c0; - i2c1 = &i2c1; - i2c2 = &i2c2; - i2c3 = &i2c3; - i2c4 = &i2c4; - i2c5 = &i2c5; - i2c6 = &i2c6; - i2c7 = &i2c_dvfs; - }; - /* * The external audio clocks are configured as 0 Hz fixed frequency * clocks by default. diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts index 49d1a929aef7..004a5eacd460 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts +++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts @@ -15,6 +15,11 @@ compatible = "renesas,eagle", "renesas,r8a77970"; aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; serial0 = &scif0; ethernet0 = &avb; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts index 39f3e6cbba3d..c2b65f8de547 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts +++ b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts @@ -15,6 +15,11 @@ compatible = "renesas,v3msk", "renesas,r8a77970"; aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; serial0 = &scif0; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi index 2703ef3a38c2..ed6e2e47c604 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi @@ -16,14 +16,6 @@ #address-cells = <2>; #size-cells = <2>; - aliases { - i2c0 = &i2c0; - i2c1 = &i2c1; - i2c2 = &i2c2; - i2c3 = &i2c3; - i2c4 = &i2c4; - }; - /* External CAN clock - to be overridden by boards that provide it */ can_clk: can { compatible = "fixed-clock"; @@ -1053,7 +1045,6 @@ reg-names = "regs", "dirmap", "wbuf"; interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 917>; - clock-names = "rpc"; power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; resets = <&cpg 917>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts index 43ed033eb512..1d326552e2fa 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts +++ b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts @@ -8,541 +8,9 @@ /dts-v1/; #include "r8a77980.dtsi" -#include <dt-bindings/gpio/gpio.h> +#include "condor-common.dtsi" / { model = "Renesas Condor board based on r8a77980"; compatible = "renesas,condor", "renesas,r8a77980"; - - aliases { - serial0 = &scif0; - ethernet0 = &gether; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - d1_8v: regulator-2 { - compatible = "regulator-fixed"; - regulator-name = "D1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - d3_3v: regulator-0 { - compatible = "regulator-fixed"; - regulator-name = "D3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - hdmi-out { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con: endpoint { - remote-endpoint = <&adv7511_out>; - }; - }; - }; - - lvds-decoder { - compatible = "thine,thc63lvd1024"; - vcc-supply = <&d3_3v>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - thc63lvd1024_in: endpoint { - remote-endpoint = <&lvds0_out>; - }; - }; - - port@2 { - reg = <2>; - thc63lvd1024_out: endpoint { - remote-endpoint = <&adv7511_in>; - }; - }; - }; - }; - - memory@48000000 { - device_type = "memory"; - /* first 128MB is reserved for secure area. */ - reg = <0 0x48000000 0 0x78000000>; - }; - - vddq_vin01: regulator-1 { - compatible = "regulator-fixed"; - regulator-name = "VDDQ_VIN01"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - x1_clk: x1-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <148500000>; - }; -}; - -&canfd { - pinctrl-0 = <&canfd0_pins>; - pinctrl-names = "default"; - status = "okay"; - - channel0 { - status = "okay"; - }; -}; - -&csi40 { - status = "okay"; - - ports { - port@0 { - csi40_in: endpoint { - clock-lanes = <0>; - data-lanes = <1 2 3 4>; - remote-endpoint = <&max9286_out0>; - }; - }; - }; -}; - -&csi41 { - status = "okay"; - - ports { - port@0 { - csi41_in: endpoint { - clock-lanes = <0>; - data-lanes = <1 2 3 4>; - remote-endpoint = <&max9286_out1>; - }; - }; - }; -}; - -&du { - clocks = <&cpg CPG_MOD 724>, - <&x1_clk>; - clock-names = "du.0", "dclkin.0"; - status = "okay"; -}; - -&extal_clk { - clock-frequency = <16666666>; -}; - -&extalr_clk { - clock-frequency = <32768>; -}; - -&gether { - pinctrl-0 = <&gether_pins>; - pinctrl-names = "default"; - - phy-mode = "rgmii-id"; - phy-handle = <&phy0>; - renesas,no-ether-link; - status = "okay"; - - phy0: ethernet-phy@0 { - compatible = "ethernet-phy-id0022.1622", - "ethernet-phy-ieee802.3-c22"; - rxc-skew-ps = <1500>; - reg = <0>; - interrupt-parent = <&gpio4>; - interrupts = <23 IRQ_TYPE_LEVEL_LOW>; - reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; - }; -}; - -&i2c0 { - pinctrl-0 = <&i2c0_pins>; - pinctrl-names = "default"; - - status = "okay"; - clock-frequency = <400000>; - - io_expander0: gpio@20 { - compatible = "onnn,pca9654"; - reg = <0x20>; - gpio-controller; - #gpio-cells = <2>; - }; - - io_expander1: gpio@21 { - compatible = "onnn,pca9654"; - reg = <0x21>; - gpio-controller; - #gpio-cells = <2>; - }; - - hdmi@39 { - compatible = "adi,adv7511w"; - reg = <0x39>; - interrupt-parent = <&gpio1>; - interrupts = <20 IRQ_TYPE_LEVEL_LOW>; - avdd-supply = <&d1_8v>; - dvdd-supply = <&d1_8v>; - pvdd-supply = <&d1_8v>; - bgvdd-supply = <&d1_8v>; - dvdd-3v-supply = <&d3_3v>; - - adi,input-depth = <8>; - adi,input-colorspace = "rgb"; - adi,input-clock = "1x"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - adv7511_in: endpoint { - remote-endpoint = <&thc63lvd1024_out>; - }; - }; - - port@1 { - reg = <1>; - adv7511_out: endpoint { - remote-endpoint = <&hdmi_con>; - }; - }; - }; - }; -}; - -&i2c1 { - pinctrl-0 = <&i2c1_pins>; - pinctrl-names = "default"; - - status = "okay"; - clock-frequency = <400000>; - - gmsl0: gmsl-deserializer@48 { - compatible = "maxim,max9286"; - reg = <0x48>; - - maxim,gpio-poc = <0 GPIO_ACTIVE_LOW>; - enable-gpios = <&io_expander0 0 GPIO_ACTIVE_HIGH>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - }; - - port@1 { - reg = <1>; - }; - - port@2 { - reg = <2>; - }; - - port@3 { - reg = <3>; - }; - - port@4 { - reg = <4>; - max9286_out0: endpoint { - clock-lanes = <0>; - data-lanes = <1 2 3 4>; - remote-endpoint = <&csi40_in>; - }; - }; - }; - - i2c-mux { - #address-cells = <1>; - #size-cells = <0>; - - i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - status = "disabled"; - }; - - i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - status = "disabled"; - }; - - i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - - status = "disabled"; - }; - - i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - - status = "disabled"; - }; - }; - }; - - gmsl1: gmsl-deserializer@4a { - compatible = "maxim,max9286"; - reg = <0x4a>; - - maxim,gpio-poc = <0 GPIO_ACTIVE_LOW>; - enable-gpios = <&io_expander1 0 GPIO_ACTIVE_HIGH>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - }; - - port@1 { - reg = <1>; - }; - - port@2 { - reg = <2>; - }; - - port@3 { - reg = <3>; - }; - - port@4 { - reg = <4>; - max9286_out1: endpoint { - clock-lanes = <0>; - data-lanes = <1 2 3 4>; - remote-endpoint = <&csi41_in>; - }; - }; - }; - - i2c-mux { - #address-cells = <1>; - #size-cells = <0>; - - i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - status = "disabled"; - }; - - i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - status = "disabled"; - }; - - i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - - status = "disabled"; - }; - - i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - - status = "disabled"; - }; - }; - }; -}; - -&lvds0 { - status = "okay"; - - ports { - port@1 { - lvds0_out: endpoint { - remote-endpoint = <&thc63lvd1024_in>; - }; - }; - }; -}; - -&mmc0 { - pinctrl-0 = <&mmc_pins>; - pinctrl-1 = <&mmc_pins>; - pinctrl-names = "default", "state_uhs"; - - vmmc-supply = <&d3_3v>; - vqmmc-supply = <&vddq_vin01>; - mmc-hs200-1_8v; - bus-width = <8>; - no-sd; - no-sdio; - non-removable; - status = "okay"; -}; - -&pciec { - status = "okay"; -}; - -&pcie_bus_clk { - clock-frequency = <100000000>; -}; - -&pcie_phy { - status = "okay"; -}; - -&pfc { - canfd0_pins: canfd0 { - groups = "canfd0_data_a"; - function = "canfd0"; - }; - - gether_pins: gether { - groups = "gether_mdio_a", "gether_rgmii", - "gether_txcrefclk", "gether_txcrefclk_mega"; - function = "gether"; - }; - - i2c0_pins: i2c0 { - groups = "i2c0"; - function = "i2c0"; - }; - - i2c1_pins: i2c1 { - groups = "i2c1"; - function = "i2c1"; - }; - - mmc_pins: mmc { - groups = "mmc_data8", "mmc_ctrl", "mmc_ds"; - function = "mmc"; - power-source = <1800>; - }; - - qspi0_pins: qspi0 { - groups = "qspi0_ctrl", "qspi0_data4"; - function = "qspi0"; - }; - - scif0_pins: scif0 { - groups = "scif0_data"; - function = "scif0"; - }; - - scif_clk_pins: scif_clk { - groups = "scif_clk_b"; - function = "scif_clk"; - }; -}; - -&rpc { - pinctrl-0 = <&qspi0_pins>; - pinctrl-names = "default"; - - status = "okay"; - - flash@0 { - compatible = "spansion,s25fs512s", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <50000000>; - spi-rx-bus-width = <4>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - bootparam@0 { - reg = <0x00000000 0x040000>; - read-only; - }; - cr7@40000 { - reg = <0x00040000 0x080000>; - read-only; - }; - cert_header_sa3@c0000 { - reg = <0x000c0000 0x080000>; - read-only; - }; - bl2@140000 { - reg = <0x00140000 0x040000>; - read-only; - }; - cert_header_sa6@180000 { - reg = <0x00180000 0x040000>; - read-only; - }; - bl31@1c0000 { - reg = <0x001c0000 0x460000>; - read-only; - }; - uboot@640000 { - reg = <0x00640000 0x0c0000>; - read-only; - }; - uboot-env@700000 { - reg = <0x00700000 0x040000>; - read-only; - }; - dtb@740000 { - reg = <0x00740000 0x080000>; - }; - kernel@7c0000 { - reg = <0x007c0000 0x1400000>; - }; - user@1bc0000 { - reg = <0x01bc0000 0x2440000>; - }; - }; - }; -}; - -&rwdt { - timeout-sec = <60>; - status = "okay"; -}; - -&scif0 { - pinctrl-0 = <&scif0_pins>, <&scif_clk_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&scif_clk { - clock-frequency = <14745600>; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts index 1d09d8867651..d168b0e7747d 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts +++ b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts @@ -15,6 +15,12 @@ compatible = "renesas,v3hsk", "renesas,r8a77980"; aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; serial0 = &scif0; ethernet0 = &gether; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi index 8594be72f221..c4ac28a0f716 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi @@ -16,15 +16,6 @@ #address-cells = <2>; #size-cells = <2>; - aliases { - i2c0 = &i2c0; - i2c1 = &i2c1; - i2c2 = &i2c2; - i2c3 = &i2c3; - i2c4 = &i2c4; - i2c5 = &i2c5; - }; - /* External CAN clock - to be overridden by boards that provide it */ can_clk: can { compatible = "fixed-clock"; @@ -1359,7 +1350,6 @@ reg-names = "regs", "dirmap", "wbuf"; interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 917>; - clock-names = "rpc"; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; resets = <&cpg 917>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/renesas/r8a77980a-condor-i.dts b/arch/arm64/boot/dts/renesas/r8a77980a-condor-i.dts new file mode 100644 index 000000000000..9f488dea0f34 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a77980a-condor-i.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the Condor-I board on r8a77980A (ES2.0) + * + * Copyright (C) 2022 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r8a77980a.dtsi" +#include "condor-common.dtsi" + +/ { + model = "Renesas Condor-I board based on r8a77980A (ES2.0)"; + compatible = "renesas,condor-i", "renesas,r8a77980a", "renesas,r8a77980"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77980a.dtsi b/arch/arm64/boot/dts/renesas/r8a77980a.dtsi new file mode 100644 index 000000000000..25b2d27b6167 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a77980a.dtsi @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +/* + * Device Tree Source for the R-Car V3H2 (R8A77980A) SoC + * + * Copyright (C) 2022 Renesas Electronics Corp. + */ +#include "r8a77980.dtsi" + +/ { + compatible = "renesas,r8a77980a", "renesas,r8a77980"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi index 565e9d85946e..3053b4b21497 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi @@ -14,17 +14,6 @@ #address-cells = <2>; #size-cells = <2>; - aliases { - i2c0 = &i2c0; - i2c1 = &i2c1; - i2c2 = &i2c2; - i2c3 = &i2c3; - i2c4 = &i2c4; - i2c5 = &i2c5; - i2c6 = &i2c6; - i2c7 = &i2c7; - }; - /* * The external audio clocks are configured as 0 Hz fixed frequency * clocks by default. diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi index 53c4a26198e3..99b73e21c82c 100644 --- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi @@ -16,6 +16,13 @@ compatible = "renesas,falcon-cpu", "renesas,r8a779a0"; aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; serial0 = &scif0; }; diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi index 3d668709d8a8..ed9400f903c9 100644 --- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi @@ -14,16 +14,6 @@ #address-cells = <2>; #size-cells = <2>; - aliases { - i2c0 = &i2c0; - i2c1 = &i2c1; - i2c2 = &i2c2; - i2c3 = &i2c3; - i2c4 = &i2c4; - i2c5 = &i2c5; - i2c6 = &i2c6; - }; - /* External CAN clock - to be overridden by boards that provide it */ can_clk: can { compatible = "fixed-clock"; @@ -257,7 +247,7 @@ cmt0: timer@e60f0000 { compatible = "renesas,r8a779a0-cmt0", - "renesas,rcar-gen3-cmt0"; + "renesas,rcar-gen4-cmt0"; reg = <0 0xe60f0000 0 0x1004>; interrupts = <GIC_SPI 500 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 501 IRQ_TYPE_LEVEL_HIGH>; @@ -270,7 +260,7 @@ cmt1: timer@e6130000 { compatible = "renesas,r8a779a0-cmt1", - "renesas,rcar-gen3-cmt1"; + "renesas,rcar-gen4-cmt1"; reg = <0 0xe6130000 0 0x1004>; interrupts = <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>, @@ -289,7 +279,7 @@ cmt2: timer@e6140000 { compatible = "renesas,r8a779a0-cmt1", - "renesas,rcar-gen3-cmt1"; + "renesas,rcar-gen4-cmt1"; reg = <0 0xe6140000 0 0x1004>; interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>, @@ -308,7 +298,7 @@ cmt3: timer@e6148000 { compatible = "renesas,r8a779a0-cmt1", - "renesas,rcar-gen3-cmt1"; + "renesas,rcar-gen4-cmt1"; reg = <0 0xe6148000 0 0x1004>; interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>, @@ -2075,7 +2065,7 @@ mmc0: mmc@ee140000 { compatible = "renesas,sdhi-r8a779a0", - "renesas,rcar-gen3-sdhi"; + "renesas,rcar-gen4-sdhi"; reg = <0 0xee140000 0 0x2000>; interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 706>, <&cpg CPG_CORE R8A779A0_CLK_SD0H>; @@ -2096,7 +2086,6 @@ reg-names = "regs", "dirmap", "wbuf"; interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 629>; - clock-names = "rpc"; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; resets = <&cpg 629>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi index 28fbf7bc1eb4..a45df1041705 100644 --- a/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi @@ -11,6 +11,16 @@ model = "Renesas Spider CPU board"; compatible = "renesas,spider-cpu", "renesas,r8a779f0"; + aliases { + serial0 = &scif3; + serial1 = &scif0; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; + stdout-path = "serial0:115200n8"; + }; + memory@48000000 { device_type = "memory"; /* first 128MB is reserved for secure area. */ @@ -21,6 +31,24 @@ device_type = "memory"; reg = <0x4 0x80000000 0x0 0x80000000>; }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; }; &extal_clk { @@ -46,6 +74,27 @@ }; }; +/* + * This board also has a microSD slot which we will not support upstream + * because we cannot directly switch voltages in software. + */ +&mmc0 { + pinctrl-0 = <&mmc_pins>; + pinctrl-1 = <&mmc_pins>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + bus-width = <8>; + no-sd; + no-sdio; + non-removable; + full-pwr-cycle-in-suspend; + status = "okay"; +}; + &pfc { pinctrl-0 = <&scif_clk_pins>; pinctrl-names = "default"; @@ -55,6 +104,12 @@ function = "i2c4"; }; + mmc_pins: mmc { + groups = "mmc_data8", "mmc_ctrl", "mmc_ds"; + function = "mmc"; + power-source = <1800>; + }; + scif0_pins: scif0 { groups = "scif0_data", "scif0_ctrl"; function = "scif0"; diff --git a/arch/arm64/boot/dts/renesas/r8a779f0-spider.dts b/arch/arm64/boot/dts/renesas/r8a779f0-spider.dts index 7a7c8ffba711..7aac3f4d319c 100644 --- a/arch/arm64/boot/dts/renesas/r8a779f0-spider.dts +++ b/arch/arm64/boot/dts/renesas/r8a779f0-spider.dts @@ -12,15 +12,6 @@ / { model = "Renesas Spider CPU and Breakout boards based on r8a779f0"; compatible = "renesas,spider-breakout", "renesas,spider-cpu", "renesas,r8a779f0"; - - aliases { - serial0 = &scif3; - serial1 = &scif0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; }; &i2c4 { diff --git a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi index 384817ffa4de..c2f152bcf10e 100644 --- a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi @@ -301,6 +301,76 @@ #interrupt-cells = <2>; }; + cmt0: timer@e60f0000 { + compatible = "renesas,r8a779f0-cmt0", + "renesas,rcar-gen4-cmt0"; + reg = <0 0xe60f0000 0 0x1004>; + interrupts = <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 910>; + clock-names = "fck"; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 910>; + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,r8a779f0-cmt1", + "renesas,rcar-gen4-cmt1"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 911>; + clock-names = "fck"; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 911>; + status = "disabled"; + }; + + cmt2: timer@e6140000 { + compatible = "renesas,r8a779f0-cmt1", + "renesas,rcar-gen4-cmt1"; + reg = <0 0xe6140000 0 0x1004>; + interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 912>; + clock-names = "fck"; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 912>; + status = "disabled"; + }; + + cmt3: timer@e6148000 { + compatible = "renesas,r8a779f0-cmt1", + "renesas,rcar-gen4-cmt1"; + reg = <0 0xe6148000 0 0x1004>; + interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 913>; + clock-names = "fck"; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 913>; + status = "disabled"; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a779f0-cpg-mssr"; reg = <0 0xe6150000 0 0x4000>; @@ -334,6 +404,71 @@ #thermal-sensor-cells = <1>; }; + tmu0: timer@e61e0000 { + compatible = "renesas,tmu-r8a779f0", "renesas,tmu"; + reg = <0 0xe61e0000 0 0x30>; + interrupts = <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 713>; + clock-names = "fck"; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 713>; + status = "disabled"; + }; + + tmu1: timer@e6fc0000 { + compatible = "renesas,tmu-r8a779f0", "renesas,tmu"; + reg = <0 0xe6fc0000 0 0x30>; + interrupts = <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 714>; + clock-names = "fck"; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 714>; + status = "disabled"; + }; + + tmu2: timer@e6fd0000 { + compatible = "renesas,tmu-r8a779f0", "renesas,tmu"; + reg = <0 0xe6fd0000 0 0x30>; + interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 482 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 483 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 715>; + clock-names = "fck"; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 715>; + status = "disabled"; + }; + + tmu3: timer@e6fe0000 { + compatible = "renesas,tmu-r8a779f0", "renesas,tmu"; + reg = <0 0xe6fe0000 0 0x30>; + interrupts = <GIC_SPI 485 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 716>; + clock-names = "fck"; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 716>; + status = "disabled"; + }; + + tmu4: timer@ffc00000 { + compatible = "renesas,tmu-r8a779f0", "renesas,tmu"; + reg = <0 0xffc00000 0 0x30>; + interrupts = <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 717>; + clock-names = "fck"; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 717>; + status = "disabled"; + }; + i2c0: i2c@e6500000 { compatible = "renesas,i2c-r8a779f0", "renesas,rcar-gen4-i2c"; @@ -584,6 +719,70 @@ status = "disabled"; }; + msiof0: spi@e6e90000 { + compatible = "renesas,msiof-r8a779f0", + "renesas,rcar-gen4-msiof"; + reg = <0 0xe6e90000 0 0x0064>; + interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 618>; + dmas = <&dmac0 0x41>, <&dmac0 0x40>, + <&dmac1 0x41>, <&dmac1 0x40>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 618>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof1: spi@e6ea0000 { + compatible = "renesas,msiof-r8a779f0", + "renesas,rcar-gen4-msiof"; + reg = <0 0xe6ea0000 0 0x0064>; + interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 619>; + dmas = <&dmac0 0x43>, <&dmac0 0x42>, + <&dmac1 0x43>, <&dmac1 0x42>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 619>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof2: spi@e6c00000 { + compatible = "renesas,msiof-r8a779f0", + "renesas,rcar-gen4-msiof"; + reg = <0 0xe6c00000 0 0x0064>; + interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 620>; + dmas = <&dmac0 0x45>, <&dmac0 0x44>, + <&dmac1 0x45>, <&dmac1 0x44>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 620>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof3: spi@e6c10000 { + compatible = "renesas,msiof-r8a779f0", + "renesas,rcar-gen4-msiof"; + reg = <0 0xe6c10000 0 0x0064>; + interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 621>; + dmas = <&dmac0 0x47>, <&dmac0 0x46>, + <&dmac1 0x47>, <&dmac1 0x46>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 621>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + dmac0: dma-controller@e7350000 { compatible = "renesas,dmac-r8a779f0", "renesas,rcar-gen4-dmac"; @@ -670,6 +869,19 @@ <&ipmmu_ds0 30>, <&ipmmu_ds0 31>; }; + mmc0: mmc@ee140000 { + compatible = "renesas,sdhi-r8a779f0", + "renesas,rcar-gen4-sdhi"; + reg = <0 0xee140000 0 0x2000>; + interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 706>, <&cpg CPG_CORE R8A779F0_CLK_SD0H>; + clock-names = "core", "clkh"; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 706>; + max-frequency = <200000000>; + status = "disabled"; + }; + ipmmu_rt0: iommu@ee480000 { compatible = "renesas,ipmmu-r8a779f0", "renesas,rcar-gen4-ipmmu-vmsa"; diff --git a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi index ea4ae4b893ab..895f0bd9f754 100644 --- a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi @@ -7,10 +7,80 @@ #include "r8a779g0.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + / { model = "Renesas White Hawk CPU board"; compatible = "renesas,white-hawk-cpu", "renesas,r8a779g0"; + aliases { + ethernet0 = &avb0; + serial0 = &hscif0; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; + stdout-path = "serial0:921600n8"; + }; + + keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&keys_pins>; + pinctrl-names = "default"; + + key-1 { + gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + linux,code = <KEY_1>; + label = "SW47"; + wakeup-source; + debounce-interval = <20>; + }; + + key-2 { + gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_2>; + label = "SW48"; + wakeup-source; + debounce-interval = <20>; + }; + + key-3 { + gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_3>; + label = "SW49"; + wakeup-source; + debounce-interval = <20>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-1 { + gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <1>; + }; + + led-2 { + gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <2>; + }; + + led-3 { + gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <3>; + }; + }; + memory@48000000 { device_type = "memory"; /* first 128MB is reserved for secure area. */ @@ -28,6 +98,24 @@ }; }; +&avb0 { + pinctrl-0 = <&avb0_pins>; + pinctrl-names = "default"; + phy-handle = <&phy0>; + tx-internal-delay-ps = <2000>; + status = "okay"; + + phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; + rxc-skew-ps = <1500>; + reg = <0>; + interrupt-parent = <&gpio7>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>; + }; +}; + &extal_clk { clock-frequency = <16666666>; }; @@ -40,6 +128,69 @@ status = "okay"; }; +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + eeprom@50 { + compatible = "rohm,br24g01", "atmel,24c01"; + label = "cpu-board"; + reg = <0x50>; + pagesize = <8>; + }; +}; + +&pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + + avb0_pins: avb0 { + mux { + groups = "avb0_link", "avb0_mdio", "avb0_rgmii", + "avb0_txcrefclk"; + function = "avb0"; + }; + + pins_mdio { + groups = "avb0_mdio"; + drive-strength = <21>; + }; + + pins_mii { + groups = "avb0_rgmii"; + drive-strength = <21>; + }; + + }; + hscif0_pins: hscif0 { + groups = "hscif0_data"; + function = "hscif0"; + }; + + i2c0_pins: i2c0 { + groups = "i2c0"; + function = "i2c0"; + }; + + keys_pins: keys { + pins = "GP_5_0", "GP_5_1", "GP_5_2"; + bias-pull-up; + }; + + scif_clk_pins: scif_clk { + groups = "scif_clk"; + function = "scif_clk"; + }; +}; + &scif_clk { clock-frequency = <24000000>; }; + +&rwdt { + timeout-sec = <60>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-csi-dsi.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-csi-dsi.dtsi new file mode 100644 index 000000000000..ae7522b60e5d --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-csi-dsi.dtsi @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the R-Car V4H White Hawk CSI/DSI sub-board + * + * Copyright (C) 2022 Glider bv + */ + +&i2c0 { + eeprom@52 { + compatible = "rohm,br24g01", "atmel,24c01"; + label = "csi-dsi-sub-board-id"; + reg = <0x52>; + pagesize = <8>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-ethernet.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-ethernet.dtsi new file mode 100644 index 000000000000..4f411f95c674 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-ethernet.dtsi @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the R-Car V4H White Hawk RAVB/Ethernet(1000Base-T1) + * sub-board + * + * Copyright (C) 2022 Glider bv + */ + +&i2c0 { + eeprom@53 { + compatible = "rohm,br24g01", "atmel,24c01"; + label = "ethernet-sub-board-id"; + reg = <0x53>; + pagesize = <8>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dts b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dts index bc0ac109b17c..04a2b6b83e74 100644 --- a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dts +++ b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dts @@ -7,16 +7,19 @@ /dts-v1/; #include "r8a779g0-white-hawk-cpu.dtsi" +#include "r8a779g0-white-hawk-csi-dsi.dtsi" +#include "r8a779g0-white-hawk-ethernet.dtsi" / { model = "Renesas White Hawk CPU and Breakout boards based on r8a779g0"; compatible = "renesas,white-hawk-breakout", "renesas,white-hawk-cpu", "renesas,r8a779g0"; +}; - aliases { - serial0 = &hscif0; - }; - - chosen { - stdout-path = "serial0:921600n8"; +&i2c0 { + eeprom@51 { + compatible = "rohm,br24g01", "atmel,24c01"; + label = "breakout-board"; + reg = <0x51>; + pagesize = <8>; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi index 7cbb0de060dd..d70f0600ae5a 100644 --- a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi @@ -59,6 +59,161 @@ #size-cells = <2>; ranges; + rwdt: watchdog@e6020000 { + compatible = "renesas,r8a779g0-wdt", + "renesas,rcar-gen4-wdt"; + reg = <0 0xe6020000 0 0x0c>; + interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 907>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 907>; + status = "disabled"; + }; + + pfc: pinctrl@e6050000 { + compatible = "renesas,pfc-r8a779g0"; + reg = <0 0xe6050000 0 0x16c>, <0 0xe6050800 0 0x16c>, + <0 0xe6058000 0 0x16c>, <0 0xe6058800 0 0x16c>, + <0 0xe6060000 0 0x16c>, <0 0xe6060800 0 0x16c>, + <0 0xe6061000 0 0x16c>, <0 0xe6061800 0 0x16c>, + <0 0xe6068000 0 0x16c>; + }; + + gpio0: gpio@e6050180 { + compatible = "renesas,gpio-r8a779g0", + "renesas,rcar-gen4-gpio"; + reg = <0 0xe6050180 0 0x54>; + interrupts = <GIC_SPI 619 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 915>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 915>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pfc 0 0 19>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio@e6050980 { + compatible = "renesas,gpio-r8a779g0", + "renesas,rcar-gen4-gpio"; + reg = <0 0xe6050980 0 0x54>; + interrupts = <GIC_SPI 623 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 915>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 915>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pfc 0 32 29>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@e6058180 { + compatible = "renesas,gpio-r8a779g0", + "renesas,rcar-gen4-gpio"; + reg = <0 0xe6058180 0 0x54>; + interrupts = <GIC_SPI 627 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 916>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 916>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pfc 0 64 20>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@e6058980 { + compatible = "renesas,gpio-r8a779g0", + "renesas,rcar-gen4-gpio"; + reg = <0 0xe6058980 0 0x54>; + interrupts = <GIC_SPI 631 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 916>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 916>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pfc 0 96 30>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@e6060180 { + compatible = "renesas,gpio-r8a779g0", + "renesas,rcar-gen4-gpio"; + reg = <0 0xe6060180 0 0x54>; + interrupts = <GIC_SPI 635 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 917>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 917>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pfc 0 128 25>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio5: gpio@e6060980 { + compatible = "renesas,gpio-r8a779g0", + "renesas,rcar-gen4-gpio"; + reg = <0 0xe6060980 0 0x54>; + interrupts = <GIC_SPI 639 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 917>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 917>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pfc 0 160 21>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio6: gpio@e6061180 { + compatible = "renesas,gpio-r8a779g0", + "renesas,rcar-gen4-gpio"; + reg = <0 0xe6061180 0 0x54>; + interrupts = <GIC_SPI 643 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 917>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 917>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pfc 0 192 21>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio7: gpio@e6061980 { + compatible = "renesas,gpio-r8a779g0", + "renesas,rcar-gen4-gpio"; + reg = <0 0xe6061980 0 0x54>; + interrupts = <GIC_SPI 647 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 917>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 917>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pfc 0 224 21>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio8: gpio@e6068180 { + compatible = "renesas,gpio-r8a779g0", + "renesas,rcar-gen4-gpio"; + reg = <0 0xe6068180 0 0x54>; + interrupts = <GIC_SPI 651 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 918>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 918>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pfc 0 256 14>; + interrupt-controller; + #interrupt-cells = <2>; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a779g0-cpg-mssr"; reg = <0 0xe6150000 0 0x4000>; @@ -80,12 +235,96 @@ #power-domain-cells = <1>; }; + i2c0: i2c@e6500000 { + compatible = "renesas,i2c-r8a779g0", + "renesas,rcar-gen4-i2c"; + reg = <0 0xe6500000 0 0x40>; + interrupts = <GIC_SPI 610 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 518>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 518>; + i2c-scl-internal-delay-ns = <110>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@e6508000 { + compatible = "renesas,i2c-r8a779g0", + "renesas,rcar-gen4-i2c"; + reg = <0 0xe6508000 0 0x40>; + interrupts = <GIC_SPI 611 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 519>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 519>; + i2c-scl-internal-delay-ns = <110>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@e6510000 { + compatible = "renesas,i2c-r8a779g0", + "renesas,rcar-gen4-i2c"; + reg = <0 0xe6510000 0 0x40>; + interrupts = <GIC_SPI 612 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 520>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 520>; + i2c-scl-internal-delay-ns = <110>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@e66d0000 { + compatible = "renesas,i2c-r8a779g0", + "renesas,rcar-gen4-i2c"; + reg = <0 0xe66d0000 0 0x40>; + interrupts = <GIC_SPI 613 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 521>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 521>; + i2c-scl-internal-delay-ns = <110>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@e66d8000 { + compatible = "renesas,i2c-r8a779g0", + "renesas,rcar-gen4-i2c"; + reg = <0 0xe66d8000 0 0x40>; + interrupts = <GIC_SPI 614 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 522>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 522>; + i2c-scl-internal-delay-ns = <110>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@e66e0000 { + compatible = "renesas,i2c-r8a779g0", + "renesas,rcar-gen4-i2c"; + reg = <0 0xe66e0000 0 0x40>; + interrupts = <GIC_SPI 615 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 523>; + i2c-scl-internal-delay-ns = <110>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + hscif0: serial@e6540000 { compatible = "renesas,hscif-r8a779g0", "renesas,rcar-gen4-hscif", "renesas,hscif"; reg = <0 0xe6540000 0 96>; - interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 514>, <&cpg CPG_CORE R8A779G0_CLK_S0D3_PER>, <&scif_clk>; @@ -95,6 +334,147 @@ status = "disabled"; }; + avb0: ethernet@e6800000 { + compatible = "renesas,etheravb-r8a779g0", + "renesas,etheravb-rcar-gen4"; + reg = <0 0xe6800000 0 0x800>; + interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1", "ch2", "ch3", "ch4", + "ch5", "ch6", "ch7", "ch8", "ch9", + "ch10", "ch11", "ch12", "ch13", + "ch14", "ch15", "ch16", "ch17", + "ch18", "ch19", "ch20", "ch21", + "ch22", "ch23", "ch24"; + clocks = <&cpg CPG_MOD 211>; + clock-names = "fck"; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 211>; + phy-mode = "rgmii"; + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + avb1: ethernet@e6810000 { + compatible = "renesas,etheravb-r8a779g0", + "renesas,etheravb-rcar-gen4"; + reg = <0 0xe6810000 0 0x800>; + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1", "ch2", "ch3", "ch4", + "ch5", "ch6", "ch7", "ch8", "ch9", + "ch10", "ch11", "ch12", "ch13", + "ch14", "ch15", "ch16", "ch17", + "ch18", "ch19", "ch20", "ch21", + "ch22", "ch23", "ch24"; + clocks = <&cpg CPG_MOD 212>; + clock-names = "fck"; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 212>; + phy-mode = "rgmii"; + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + avb2: ethernet@e6820000 { + compatible = "renesas,etheravb-r8a779g0", + "renesas,etheravb-rcar-gen4"; + reg = <0 0xe6820000 0 0x1000>; + interrupts = <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 388 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1", "ch2", "ch3", "ch4", + "ch5", "ch6", "ch7", "ch8", "ch9", + "ch10", "ch11", "ch12", "ch13", + "ch14", "ch15", "ch16", "ch17", + "ch18", "ch19", "ch20", "ch21", + "ch22", "ch23", "ch24"; + clocks = <&cpg CPG_MOD 213>; + clock-names = "fck"; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 213>; + phy-mode = "rgmii"; + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + gic: interrupt-controller@f1000000 { compatible = "arm,gic-v3"; #interrupt-cells = <3>; diff --git a/arch/arm64/boot/dts/renesas/r8a779mb.dtsi b/arch/arm64/boot/dts/renesas/r8a779mb.dtsi new file mode 100644 index 000000000000..40d1dce2f350 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779mb.dtsi @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +/* + * Device Tree Source for the R-Car H3Ne-1.7G (R8A779MB) SoC + * + * Copyright (C) 2022 Glider bv + */ + +#include "r8a77951.dtsi" + +/ { + compatible = "renesas,r8a779mb", "renesas,r8a7795"; +}; diff --git a/arch/arm64/boot/dts/renesas/r9a07g043.dtsi b/arch/arm64/boot/dts/renesas/r9a07g043.dtsi index 40201a16d653..689aa4ba416b 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g043.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g043.dtsi @@ -13,14 +13,14 @@ #address-cells = <2>; #size-cells = <2>; - audio_clk1: audio-clk1 { + audio_clk1: audio1-clk { compatible = "fixed-clock"; #clock-cells = <0>; /* This value must be overridden by boards that provide it */ clock-frequency = <0>; }; - audio_clk2: audio-clk2 { + audio_clk2: audio2-clk { compatible = "fixed-clock"; #clock-cells = <0>; /* This value must be overridden by boards that provide it */ @@ -196,6 +196,8 @@ interrupt-names = "error", "rx", "tx"; clocks = <&cpg CPG_MOD R9A07G043_RSPI0_CLKB>; resets = <&cpg R9A07G043_RSPI0_RST>; + dmas = <&dmac 0x2e95>, <&dmac 0x2e96>; + dma-names = "tx", "rx"; power-domains = <&cpg>; num-cs = <1>; #address-cells = <1>; @@ -212,6 +214,8 @@ interrupt-names = "error", "rx", "tx"; clocks = <&cpg CPG_MOD R9A07G043_RSPI1_CLKB>; resets = <&cpg R9A07G043_RSPI1_RST>; + dmas = <&dmac 0x2e99>, <&dmac 0x2e9a>; + dma-names = "tx", "rx"; power-domains = <&cpg>; num-cs = <1>; #address-cells = <1>; @@ -228,6 +232,8 @@ interrupt-names = "error", "rx", "tx"; clocks = <&cpg CPG_MOD R9A07G043_RSPI2_CLKB>; resets = <&cpg R9A07G043_RSPI2_RST>; + dmas = <&dmac 0x2e9d>, <&dmac 0x2e9e>; + dma-names = "tx", "rx"; power-domains = <&cpg>; num-cs = <1>; #address-cells = <1>; @@ -334,8 +340,8 @@ compatible = "renesas,r9a07g043-sci", "renesas,sci"; reg = <0 0x1004d000 0 0x400>; interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 406 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 407 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "eri", "rxi", "txi", "tei"; clocks = <&cpg CPG_MOD R9A07G043_SCI0_CLKP>; @@ -349,8 +355,8 @@ compatible = "renesas,r9a07g043-sci", "renesas,sci"; reg = <0 0x1004d400 0 0x400>; interrupts = <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 410 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 411 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "eri", "rxi", "txi", "tei"; clocks = <&cpg CPG_MOD R9A07G043_SCI1_CLKP>; @@ -613,7 +619,7 @@ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>; }; - sdhi0: mmc@11c00000 { + sdhi0: mmc@11c00000 { compatible = "renesas,sdhi-r9a07g043", "renesas,rcar-gen3-sdhi"; reg = <0x0 0x11c00000 0 0x10000>; diff --git a/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc.dts index 121e55282d18..059885a01ede 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc.dts +++ b/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc.dts @@ -6,7 +6,19 @@ */ /dts-v1/; + +/* + * DIP-Switch SW1 setting + * 1 : High; 0: Low + * SW1-2 : SW_SD0_DEV_SEL (0: uSD; 1: eMMC) + * SW1-3 : SW_ET0_EN_N (0: ETHER0; 1: CAN0, CAN1, SSI1, RSPI1) + * Please change below macros according to SW1 setting on the SoM + */ +#define SW_SW0_DEV_SEL 1 +#define SW_ET0_EN_N 1 + #include "r9a07g043.dtsi" +#include "rzg2ul-smarc-som.dtsi" #include "rzg2ul-smarc.dtsi" / { diff --git a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi index 3652e511160f..2283d4fb8736 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi @@ -261,6 +261,8 @@ interrupt-names = "error", "rx", "tx"; clocks = <&cpg CPG_MOD R9A07G044_RSPI0_CLKB>; resets = <&cpg R9A07G044_RSPI0_RST>; + dmas = <&dmac 0x2e95>, <&dmac 0x2e96>; + dma-names = "tx", "rx"; power-domains = <&cpg>; num-cs = <1>; #address-cells = <1>; @@ -277,6 +279,8 @@ interrupt-names = "error", "rx", "tx"; clocks = <&cpg CPG_MOD R9A07G044_RSPI1_CLKB>; resets = <&cpg R9A07G044_RSPI1_RST>; + dmas = <&dmac 0x2e99>, <&dmac 0x2e9a>; + dma-names = "tx", "rx"; power-domains = <&cpg>; num-cs = <1>; #address-cells = <1>; @@ -293,6 +297,8 @@ interrupt-names = "error", "rx", "tx"; clocks = <&cpg CPG_MOD R9A07G044_RSPI2_CLKB>; resets = <&cpg R9A07G044_RSPI2_RST>; + dmas = <&dmac 0x2e9d>, <&dmac 0x2e9e>; + dma-names = "tx", "rx"; power-domains = <&cpg>; num-cs = <1>; #address-cells = <1>; @@ -394,8 +400,8 @@ compatible = "renesas,r9a07g044-sci", "renesas,sci"; reg = <0 0x1004d000 0 0x400>; interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 406 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 407 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "eri", "rxi", "txi", "tei"; clocks = <&cpg CPG_MOD R9A07G044_SCI0_CLKP>; @@ -409,8 +415,8 @@ compatible = "renesas,r9a07g044-sci", "renesas,sci"; reg = <0 0x1004d400 0 0x400>; interrupts = <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 410 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 411 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "eri", "rxi", "txi", "tei"; clocks = <&cpg CPG_MOD R9A07G044_SCI1_CLKP>; @@ -638,6 +644,10 @@ reg = <0 0x11030000 0 0x10000>; gpio-controller; #gpio-cells = <2>; + #address-cells = <2>; + #interrupt-cells = <2>; + interrupt-parent = <&irqc>; + interrupt-controller; gpio-ranges = <&pinctrl 0 0 392>; clocks = <&cpg CPG_MOD R9A07G044_GPIO_HCLK>; power-domains = <&cpg>; @@ -646,6 +656,61 @@ <&cpg R9A07G044_GPIO_SPARE_RESETN>; }; + irqc: interrupt-controller@110a0000 { + compatible = "renesas,r9a07g044-irqc", + "renesas,rzg2l-irqc"; + #interrupt-cells = <2>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0x110a0000 0 0x10000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A07G044_IA55_CLK>, + <&cpg CPG_MOD R9A07G044_IA55_PCLK>; + clock-names = "clk", "pclk"; + power-domains = <&cpg>; + resets = <&cpg R9A07G044_IA55_RESETN>; + }; + dmac: dma-controller@11820000 { compatible = "renesas,r9a07g044-dmac", "renesas,rz-dmac"; @@ -713,7 +778,7 @@ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>; }; - sdhi0: mmc@11c00000 { + sdhi0: mmc@11c00000 { compatible = "renesas,sdhi-r9a07g044", "renesas,rcar-gen3-sdhi"; reg = <0x0 0x11c00000 0 0x10000>; diff --git a/arch/arm64/boot/dts/renesas/r9a07g054.dtsi b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi index 4d6b9d7684c9..358d4c34465f 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g054.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi @@ -261,6 +261,8 @@ interrupt-names = "error", "rx", "tx"; clocks = <&cpg CPG_MOD R9A07G054_RSPI0_CLKB>; resets = <&cpg R9A07G054_RSPI0_RST>; + dmas = <&dmac 0x2e95>, <&dmac 0x2e96>; + dma-names = "tx", "rx"; power-domains = <&cpg>; num-cs = <1>; #address-cells = <1>; @@ -277,6 +279,8 @@ interrupt-names = "error", "rx", "tx"; clocks = <&cpg CPG_MOD R9A07G054_RSPI1_CLKB>; resets = <&cpg R9A07G054_RSPI1_RST>; + dmas = <&dmac 0x2e99>, <&dmac 0x2e9a>; + dma-names = "tx", "rx"; power-domains = <&cpg>; num-cs = <1>; #address-cells = <1>; @@ -293,6 +297,8 @@ interrupt-names = "error", "rx", "tx"; clocks = <&cpg CPG_MOD R9A07G054_RSPI2_CLKB>; resets = <&cpg R9A07G054_RSPI2_RST>; + dmas = <&dmac 0x2e9d>, <&dmac 0x2e9e>; + dma-names = "tx", "rx"; power-domains = <&cpg>; num-cs = <1>; #address-cells = <1>; @@ -399,8 +405,8 @@ compatible = "renesas,r9a07g054-sci", "renesas,sci"; reg = <0 0x1004d000 0 0x400>; interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 406 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 407 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "eri", "rxi", "txi", "tei"; clocks = <&cpg CPG_MOD R9A07G054_SCI0_CLKP>; @@ -414,8 +420,8 @@ compatible = "renesas,r9a07g054-sci", "renesas,sci"; reg = <0 0x1004d400 0 0x400>; interrupts = <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 410 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 411 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "eri", "rxi", "txi", "tei"; clocks = <&cpg CPG_MOD R9A07G054_SCI1_CLKP>; @@ -644,6 +650,10 @@ reg = <0 0x11030000 0 0x10000>; gpio-controller; #gpio-cells = <2>; + #address-cells = <2>; + #interrupt-cells = <2>; + interrupt-parent = <&irqc>; + interrupt-controller; gpio-ranges = <&pinctrl 0 0 392>; clocks = <&cpg CPG_MOD R9A07G054_GPIO_HCLK>; power-domains = <&cpg>; @@ -652,6 +662,61 @@ <&cpg R9A07G054_GPIO_SPARE_RESETN>; }; + irqc: interrupt-controller@110a0000 { + compatible = "renesas,r9a07g054-irqc", + "renesas,rzg2l-irqc"; + #interrupt-cells = <2>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0x110a0000 0 0x10000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A07G054_IA55_CLK>, + <&cpg CPG_MOD R9A07G054_IA55_PCLK>; + clock-names = "clk", "pclk"; + power-domains = <&cpg>; + resets = <&cpg R9A07G054_IA55_RESETN>; + }; + dmac: dma-controller@11820000 { compatible = "renesas,r9a07g054-dmac", "renesas,rz-dmac"; @@ -719,7 +784,7 @@ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>; }; - sdhi0: mmc@11c00000 { + sdhi0: mmc@11c00000 { compatible = "renesas,sdhi-r9a07g054", "renesas,rcar-gen3-sdhi"; reg = <0x0 0x11c00000 0 0x10000>; diff --git a/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts b/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts index c3a52fa0b16e..5c15d73d059f 100644 --- a/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts +++ b/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts @@ -7,6 +7,7 @@ /dts-v1/; #include "r9a09g011.dtsi" +#include <dt-bindings/pinctrl/rzv2m-pinctrl.h> / { model = "RZ/V2M Evaluation Kit 2.0"; @@ -53,6 +54,32 @@ clock-frequency = <48000000>; }; +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c2 { + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + clock-frequency = <100000>; + status = "okay"; +}; + +&pinctrl { + i2c0_pins: i2c0 { + pinmux = <RZV2M_PORT_PINMUX(5, 0, 2)>, /* SDA */ + <RZV2M_PORT_PINMUX(5, 1, 2)>; /* SCL */ + }; + + i2c2_pins: i2c2 { + pinmux = <RZV2M_PORT_PINMUX(3, 8, 2)>, /* SDA */ + <RZV2M_PORT_PINMUX(3, 9, 2)>; /* SCL */ + }; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/renesas/r9a09g011.dtsi b/arch/arm64/boot/dts/renesas/r9a09g011.dtsi index d4cc5459fbb7..fb1a97202c38 100644 --- a/arch/arm64/boot/dts/renesas/r9a09g011.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a09g011.dtsi @@ -123,6 +123,34 @@ #power-domain-cells = <0>; }; + i2c0: i2c@a4030000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r9a09g011", "renesas,rzv2m-i2c"; + reg = <0 0xa4030000 0 0x80>; + interrupts = <GIC_SPI 232 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 236 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "tia", "tis"; + clocks = <&cpg CPG_MOD R9A09G011_IIC_PCLK0>; + resets = <&cpg R9A09G011_IIC_GPA_PRESETN>; + power-domains = <&cpg>; + status = "disabled"; + }; + + i2c2: i2c@a4030100 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r9a09g011", "renesas,rzv2m-i2c"; + reg = <0 0xa4030100 0 0x80>; + interrupts = <GIC_SPI 234 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 238 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "tia", "tis"; + clocks = <&cpg CPG_MOD R9A09G011_IIC_PCLK1>; + resets = <&cpg R9A09G011_IIC_GPB_PRESETN>; + power-domains = <&cpg>; + status = "disabled"; + }; + uart0: serial@a4040000 { compatible = "renesas,r9a09g011-uart", "renesas,em-uart"; reg = <0 0xa4040000 0 0x80>; @@ -132,6 +160,56 @@ clock-names = "sclk", "pclk"; status = "disabled"; }; + + pinctrl: pinctrl@b6250000 { + compatible = "renesas,r9a09g011-pinctrl"; + reg = <0 0xb6250000 0 0x800>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 352>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A09G011_PFC_PCLK>; + power-domains = <&cpg>; + resets = <&cpg R9A09G011_PFC_PRESETN>; + }; }; timer { diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi index 9410796c8ad6..c4faff092380 100644 --- a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi @@ -6,6 +6,7 @@ */ #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irqc-rzg2l.h> #include <dt-bindings/pinctrl/rzg2l-pinctrl.h> /* SW1[2] should be at position 2/OFF to enable 64 GB eMMC */ @@ -94,6 +95,8 @@ compatible = "ethernet-phy-id0022.1640", "ethernet-phy-ieee802.3-c22"; reg = <7>; + interrupt-parent = <&irqc>; + interrupts = <RZG2L_IRQ2 IRQ_TYPE_LEVEL_LOW>; rxc-skew-psec = <2400>; txc-skew-psec = <2400>; rxdv-skew-psec = <0>; @@ -120,6 +123,8 @@ compatible = "ethernet-phy-id0022.1640", "ethernet-phy-ieee802.3-c22"; reg = <7>; + interrupt-parent = <&irqc>; + interrupts = <RZG2L_IRQ3 IRQ_TYPE_LEVEL_LOW>; rxc-skew-psec = <2400>; txc-skew-psec = <2400>; rxdv-skew-psec = <0>; @@ -171,7 +176,8 @@ <RZG2L_PORT_PINMUX(25, 0, 1)>, /* ET0_RXD0 */ <RZG2L_PORT_PINMUX(25, 1, 1)>, /* ET0_RXD1 */ <RZG2L_PORT_PINMUX(26, 0, 1)>, /* ET0_RXD2 */ - <RZG2L_PORT_PINMUX(26, 1, 1)>; /* ET0_RXD3 */ + <RZG2L_PORT_PINMUX(26, 1, 1)>, /* ET0_RXD3 */ + <RZG2L_PORT_PINMUX(1, 0, 1)>; /* IRQ2 */ }; eth1_pins: eth1 { @@ -189,7 +195,8 @@ <RZG2L_PORT_PINMUX(34, 1, 1)>, /* ET1_RXD0 */ <RZG2L_PORT_PINMUX(35, 0, 1)>, /* ET1_RXD1 */ <RZG2L_PORT_PINMUX(35, 1, 1)>, /* ET1_RXD2 */ - <RZG2L_PORT_PINMUX(36, 0, 1)>; /* ET1_RXD3 */ + <RZG2L_PORT_PINMUX(36, 0, 1)>, /* ET1_RXD3 */ + <RZG2L_PORT_PINMUX(1, 1, 1)>; /* IRQ3 */ }; gpio-sd0-pwr-en-hog { diff --git a/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi index cf3b3d118ef1..2a0feb53f0dc 100644 --- a/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi @@ -263,8 +263,3 @@ status = "okay"; timeout-sec = <60>; }; - -&wdt2 { - status = "okay"; - timeout-sec = <60>; -}; diff --git a/arch/arm64/boot/dts/renesas/rzg2ul-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2ul-smarc.dtsi index f9835c12023e..2a1331ed1a5c 100644 --- a/arch/arm64/boot/dts/renesas/rzg2ul-smarc.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg2ul-smarc.dtsi @@ -5,17 +5,6 @@ * Copyright (C) 2022 Renesas Electronics Corp. */ -/* - * DIP-Switch SW1 setting - * 1 : High; 0: Low - * SW1-2 : SW_SD0_DEV_SEL (0: uSD; 1: eMMC) - * SW1-3 : SW_ET0_EN_N (0: ETHER0; 1: CAN0, CAN1, SSI1, RSPI1) - * Please change below macros according to SW1 setting - */ -#define SW_SW0_DEV_SEL 1 -#define SW_ET0_EN_N 1 - -#include "rzg2ul-smarc-som.dtsi" #include "rzg2ul-smarc-pinfunction.dtsi" #include "rz-smarc-common.dtsi" diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi index b7c7911858b2..d97473401819 100644 --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi @@ -33,6 +33,14 @@ / { aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c_dvfs; serial0 = &scif2; serial1 = &hscif1; ethernet0 = &avb; diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi index 0772dfe4adff..29cedf4dc1a9 100644 --- a/arch/arm64/boot/dts/renesas/ulcb.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi @@ -21,6 +21,14 @@ model = "Renesas R-Car Gen3 ULCB board"; aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c_dvfs; serial0 = &scif2; ethernet0 = &avb; mmc0 = &sdhi2; diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index ef79a672804a..8c15593c0ca4 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -21,6 +21,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-lion-haikou.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-orion-r68-meta.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-px5-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-eaidk-610.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-ficus.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-firefly.dtb @@ -40,12 +41,15 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-m4.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-m4b.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-neo4.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-r4s.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-r4s-enterprise.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-orangepi.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-pinebook-pro.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-pinephone-pro.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-mezzanine.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-plus.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-4c-plus.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4a.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4a-plus.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4b.dtb @@ -57,6 +61,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353p.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg503.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.1.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core.dtsi b/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core.dtsi index 7249871530ab..5eecbefa8a33 100644 --- a/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core.dtsi +++ b/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core.dtsi @@ -2,8 +2,8 @@ /* * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd * Copyright (c) 2020 Engicam srl - * Copyright (c) 2020 Amarula Solutons - * Copyright (c) 2020 Amarula Solutons(India) + * Copyright (c) 2020 Amarula Solutions + * Copyright (c) 2020 Amarula Solutions(India) */ #include <dt-bindings/gpio/gpio.h> diff --git a/arch/arm64/boot/dts/rockchip/px30-evb.dts b/arch/arm64/boot/dts/rockchip/px30-evb.dts index 848bc39cf86a..07008d84434c 100644 --- a/arch/arm64/boot/dts/rockchip/px30-evb.dts +++ b/arch/arm64/boot/dts/rockchip/px30-evb.dts @@ -450,8 +450,8 @@ dvdd-supply = <&vcc1v5_dvp>; dovdd-supply = <&vcc1v8_dvp>; pinctrl-names = "default"; - pinctrl-0 = <&cif_clkout_m0>; - reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&cif_clkout_m0 &mipi_pdn>; + reset-gpios = <&gpio2 RK_PB6 GPIO_ACTIVE_LOW>; port { ucam_out: endpoint { @@ -537,6 +537,19 @@ <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + + cif-m0 { + cif_clkout_m0: cif-clkout-m0 { + rockchip,pins = + <2 RK_PB3 1 &pcfg_pull_none_12ma>; + }; + }; + + mipi { + mipi_pdn: mipi-pdn { + rockchip,pins = <2 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; }; &pmu_io_domains { diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi index 214f94fea3dc..bfa3580429d1 100644 --- a/arch/arm64/boot/dts/rockchip/px30.dtsi +++ b/arch/arm64/boot/dts/rockchip/px30.dtsi @@ -365,6 +365,28 @@ status = "disabled"; }; + i2s0_8ch: i2s@ff060000 { + compatible = "rockchip,px30-i2s-tdm"; + reg = <0x0 0xff060000 0x0 0x1000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_I2S0_TX>, <&cru SCLK_I2S0_RX>, <&cru HCLK_I2S0>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + dmas = <&dmac 16>, <&dmac 17>; + dma-names = "tx", "rx"; + rockchip,grf = <&grf>; + resets = <&cru SRST_I2S0_TX>, <&cru SRST_I2S0_RX>; + reset-names = "tx-m", "rx-m"; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_8ch_sclktx &i2s0_8ch_sclkrx + &i2s0_8ch_lrcktx &i2s0_8ch_lrckrx + &i2s0_8ch_sdo0 &i2s0_8ch_sdi0 + &i2s0_8ch_sdo1 &i2s0_8ch_sdi1 + &i2s0_8ch_sdo2 &i2s0_8ch_sdi2 + &i2s0_8ch_sdo3 &i2s0_8ch_sdi3>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + i2s1_2ch: i2s@ff070000 { compatible = "rockchip,px30-i2s", "rockchip,rk3066-i2s"; reg = <0x0 0xff070000 0x0 0x1000>; diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts index 415aa9ff8bd4..72899a714310 100644 --- a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts +++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts @@ -52,6 +52,25 @@ pwms = <&pwm1 0 25000 0>; }; + battery: battery { + compatible = "simple-battery"; + charge-full-design-microamp-hours = <3000000>; + charge-term-current-microamp = <300000>; + constant-charge-current-max-microamp = <2000000>; + constant-charge-voltage-max-microvolt = <4200000>; + factory-internal-resistance-micro-ohms = <180000>; + voltage-max-design-microvolt = <4100000>; + voltage-min-design-microvolt = <3500000>; + + ocv-capacity-celsius = <20>; + ocv-capacity-table-0 = <4046950 100>, <4001920 95>, <3967900 90>, <3919950 85>, + <3888450 80>, <3861850 75>, <3831540 70>, <3799130 65>, + <3768190 60>, <3745650 55>, <3726610 50>, <3711630 45>, + <3696720 40>, <3685660 35>, <3674950 30>, <3663050 25>, + <3649470 20>, <3635260 15>, <3616920 10>, <3592440 5>, + <3574170 0>; + }; + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -472,6 +491,13 @@ }; }; + rk817_charger: charger { + monitored-battery = <&battery>; + rockchip,resistor-sense-micro-ohms = <10000>; + rockchip,sleep-enter-current-microamp = <300000>; + rockchip,sleep-filter-current-microamp = <100000>; + }; + rk817_codec: codec { rockchip,mic-in-differential; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts b/arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts new file mode 100644 index 000000000000..d1f343345f67 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts @@ -0,0 +1,939 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2022 Fuzhou Rockchip Electronics Co., Ltd. + */ + +/dts-v1/; +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/usb/pd.h> +#include "rk3399.dtsi" +#include "rk3399-opp.dtsi" + +/ { + model = "OPEN AI LAB EAIDK-610"; + compatible = "openailab,eaidk-610", "rockchip,rk3399"; + + aliases { + mmc0 = &sdio0; + mmc1 = &sdmmc; + mmc2 = &sdhci; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm0 0 25000 0>; + brightness-levels = < + 0 1 2 3 4 5 6 7 + 8 9 10 11 12 13 14 15 + 16 17 18 19 20 21 22 23 + 24 25 26 27 28 29 30 31 + 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 + 48 49 50 51 52 53 54 55 + 56 57 58 59 60 61 62 63 + 64 65 66 67 68 69 70 71 + 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 + 88 89 90 91 92 93 94 95 + 96 97 98 99 100 101 102 103 + 104 105 106 107 108 109 110 111 + 112 113 114 115 116 117 118 119 + 120 121 122 123 124 125 126 127 + 128 129 130 131 132 133 134 135 + 136 137 138 139 140 141 142 143 + 144 145 146 147 148 149 150 151 + 152 153 154 155 156 157 158 159 + 160 161 162 163 164 165 166 167 + 168 169 170 171 172 173 174 175 + 176 177 178 179 180 181 182 183 + 184 185 186 187 188 189 190 191 + 192 193 194 195 196 197 198 199 + 200 201 202 203 204 205 206 207 + 208 209 210 211 212 213 214 215 + 216 217 218 219 220 221 222 223 + 224 225 226 227 228 229 230 231 + 232 233 234 235 236 237 238 239 + 240 241 242 243 244 245 246 247 + 248 249 250 251 252 253 254 255>; + default-brightness-level = <200>; + }; + + clkin_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "clkin_gmac"; + #clock-cells = <0>; + }; + + dc_12v: dc-12v { + compatible = "regulator-fixed"; + regulator-name = "dc_12v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + pinctrl-names = "default"; + pinctrl-0 = <&pwrbtn>; + + key-power { + debounce-interval = <100>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; + label = "GPIO Key Power"; + linux,code = <KEY_POWER>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&work_led_pin>, <&user_led_pin>, + <&heartbeat_led_pin>, <&wlan_active_led_pin>, + <&bt_active_led_pin>; + + work_led: led-0 { + label = "blue:work"; + default-state = "on"; + gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; + }; + + user_led: led-1 { + label = "read:user"; + default-state = "off"; + gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; + }; + + heartbeat_led: led-2 { + label = "green:heartbeat"; + linux,default-trigger = "heartbeat"; + gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; + }; + + wlan_active_led: led-3 { + label = "yellow:wlan"; + gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + + bt_active_led: led-4 { + label = "blue:bt"; + gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "hci0-power"; + default-state = "off"; + }; + }; + + rt5651-sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "realtek,rt5651-codec"; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "Mic Jack", "MICBIAS1", + "IN1P", "Mic Jack", + "Headphone Jack", "HPOL", + "Headphone Jack", "HPOR"; + simple-audio-card,cpu { + sound-dai = <&i2s1>; + }; + simple-audio-card,codec { + sound-dai = <&rt5651>; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + + /* + * On the module itself this is one of these (depending + * on the actual card populated): + * - SDIO_RESET_L_WL_REG_ON + * - PDN (power down when low) + */ + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; + }; + + /* switched by pmic_sleep */ + vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_1v8>; + }; + + vcc3v3_sys: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_12v>; + }; + + vcc5v0_sys: vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; + + /* For USB3.0 Port1/2 */ + vcc5v0_host1: vcc5v0-host1-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host1_en>; + regulator-name = "vcc5v0_host1"; + regulator-always-on; + vin-supply = <&vcc5v0_sys>; + }; + + /* For USB2.0 Port1/2 */ + vcc5v0_host3: vcc5v0-host3-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host3_en>; + regulator-name = "vcc5v0_host3"; + regulator-always-on; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_typec: vcc5v0-typec-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_typec_en>; + regulator-name = "vcc5v0_typec"; + regulator-always-on; + vin-supply = <&vcc3v3_sys>; + }; + + vdd_log: vdd-log { + compatible = "regulator-fixed"; + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + }; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_b>; +}; + +&emmc_phy { + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_RMII_SRC>; + assigned-clock-parents = <&clkin_gmac>; + clock_in_out = "input"; + phy-supply = <&vcc_lan>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + tx_delay = <0x28>; + rx_delay = <0x11>; + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio1>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + vcc10-supply = <&vcc3v3_sys>; + vcc11-supply = <&vcc3v3_sys>; + vcc12-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_3v0>; + + regulators { + vdd_center: DCDC_REG1 { + regulator-name = "vdd_center"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-name = "vdd_cpu_l"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG4 { + regulator-name = "vcc_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc1v8_dvp: LDO_REG1 { + regulator-name = "vcc1v8_dvp"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc2v8_dvp: LDO_REG2 { + regulator-name = "vcc2v8_dvp"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc1v8_pmu: LDO_REG3 { + regulator-name = "vcc1v8_pmu"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_sdio: LDO_REG4 { + regulator-name = "vcc_sdio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcca3v0_codec: LDO_REG5 { + regulator-name = "vcca3v0_codec"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-name = "vcc_1v5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcca1v8_codec: LDO_REG7 { + regulator-name = "vcca1v8_codec"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v0: LDO_REG8 { + regulator-name = "vcc_3v0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc3v3_s3: vcc_lan: SWITCH_REG1 { + regulator-name = "vcc3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_s0: SWITCH_REG2 { + regulator-name = "vcc3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + + vdd_cpu_b: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_b"; + pinctrl-names = "default"; + pinctrl-0 = <&vsel1_pin>; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc3v3_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: regulator@41 { + compatible = "silergy,syr828"; + reg = <0x41>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_gpu"; + pinctrl-names = "default"; + pinctrl-0 = <&vsel2_pin>; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc3v3_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c1 { + i2c-scl-rising-time-ns = <300>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; + + rt5651: audio-codec@1a { + compatible = "rockchip,rt5651"; + reg = <0x1a>; + clocks = <&cru SCLK_I2S_8CH_OUT>; + clock-names = "mclk"; + hp-det-gpio = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>; + spk-con-gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; + #sound-dai-cells = <0>; + }; + +}; + +&i2c3 { + i2c-scl-rising-time-ns = <450>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c4 { + i2c-scl-rising-time-ns = <600>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + + fusb0: typec-portc@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupt-parent = <&gpio1>; + interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&fusb0_int>; + vbus-supply = <&vcc5v0_typec>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + usbc0_role_sw: endpoint@0 { + remote-endpoint = <&dwc3_0_role_switch>; + }; + }; + }; + + connector { + compatible = "usb-c-connector"; + data-role = "dual"; + label = "USB-C"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usbc_hs: endpoint { + remote-endpoint = <&u2phy0_typec_hs>; + }; + }; + + port@1 { + reg = <1>; + + usbc_ss: endpoint { + remote-endpoint = <&tcphy0_typec_ss>; + }; + }; + }; + }; + }; +}; + +&i2s1 { + rockchip,playback-channels = <2>; + rockchip,capture-channels = <2>; + status = "okay"; +}; + +&i2s2 { + status = "okay"; +}; + +&io_domains { + status = "okay"; + + audio-supply = <&vcca1v8_codec>; + bt656-supply = <&vcc_3v0>; + gpio1830-supply = <&vcc_3v0>; + sdmmc-supply = <&vcc_sdio>; +}; + +&pmu_io_domains { + status = "okay"; + + pmu1830-supply = <&vcc_3v0>; +}; + +&pinctrl { + buttons { + pwrbtn: pwrbtn { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + bt { + bt_enable_h: bt-enable-h { + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_l: bt-wake-l { + rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + fusb302x { + fusb0_int: fusb0-int { + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + lcd-panel { + lcd_panel_reset: lcd-panel-reset { + rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + leds { + work_led_pin: work-led-pin { + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + user_led_pin: user-led-pin { + rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + heartbeat_led_pin: heartbeat-led-pin { + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wlan_active_led_pin: wlan-led-pin { + rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_active_led_pin: bt-led-pin { + rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + vsel1_pin: vsel1-pin { + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + vsel2_pin: vsel2-pin { + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + rt5651 { + rt5651_hpcon: rt5640-hpcon { + rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb-typec { + vcc5v0_typec_en: vcc5v0_typec_en { + rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb2 { + vcc5v0_host3_en: vcc5v0-host3-en { + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + vcc5v0_host1_en: vcc5v0-host1-en { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wifi { + wifi_host_wake_l: wifi-host-wake-l { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm0 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca1v8_s3>; + status = "okay"; +}; + +&sdio0 { + /* WiFi & BT combo module AMPAK AP6255 */ + #address-cells = <1>; + #size-cells = <0>; + bus-width = <4>; + clock-frequency = <50000000>; + cap-sdio-irq; + cap-sd-highspeed; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; + sd-uhs-sdr104; + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake_l>; + }; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; + disable-wp; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&tcphy0 { + status = "okay"; +}; + +&tcphy0_usb3 { + orientation-switch; + port { + tcphy0_typec_ss: endpoint { + remote-endpoint = <&usbc_ss>; + }; + }; +}; + +&tcphy1 { + status = "okay"; +}; + +&tsadc { + /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-mode = <1>; + /* tshut polarity 0:LOW 1:HIGH */ + rockchip,hw-tshut-polarity = <1>; + status = "okay"; +}; + +&u2phy0 { + status = "okay"; + + u2phy0_otg: otg-port { + status = "okay"; + }; + + u2phy0_host: host-port { + phy-supply = <&vcc5v0_host3>; + status = "okay"; + }; + + port { + u2phy0_typec_hs: endpoint { + remote-endpoint = <&usbc_hs>; + }; + }; +}; + +&u2phy1 { + status = "okay"; + + u2phy1_otg: otg-port { + status = "okay"; + }; + + u2phy1_host: host-port { + phy-supply = <&vcc5v0_host3>; + status = "okay"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm4345c5"; + clocks = <&rk808 1>; + clock-names = "lpo"; + device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; + max-speed = <1500000>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; + vbat-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_1v8>; + }; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usbdrd3_0 { + status = "okay"; +}; + +&usbdrd_dwc3_0 { + status = "okay"; + usb-role-switch; + + port { + #address-cells = <1>; + #size-cells = <0>; + dwc3_0_role_switch: endpoint@0 { + reg = <0>; + remote-endpoint = <&usbc0_role_sw>; + }; + }; +}; + +&usbdrd3_1 { + status = "okay"; +}; + +&usbdrd_dwc3_1 { + status = "okay"; + dr_mode = "host"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts index 31ebb4e5fd33..0f9cc042d9bf 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts @@ -88,3 +88,8 @@ }; }; }; + +&wlan_host_wake_l { + /* Kevin has an external pull up, but Bob does not. */ + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi index cd074641884b..ee6095baba4d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi @@ -244,6 +244,14 @@ &edp { status = "okay"; + /* + * eDP PHY/clk don't sync reliably at anything other than 24 MHz. Only + * set this here, because rk3399-gru.dtsi ensures we can generate this + * off GPLL=600MHz, whereas some other RK3399 boards may not. + */ + assigned-clocks = <&cru PCLK_EDP>; + assigned-clock-rates = <24000000>; + ports { edp_out: port@1 { reg = <1>; @@ -578,6 +586,7 @@ ap_i2c_tp: &i2c5 { }; wlan_host_wake_l: wlan-host-wake-l { + /* Kevin has an external pull up, but Bob does not */ rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-inx.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-inx.dts index 2d721a974790..5d1879033e7c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-inx.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-inx.dts @@ -11,17 +11,29 @@ / { model = "Google Scarlet"; - compatible = "google,scarlet-rev15-sku6", "google,scarlet-rev15", + compatible = "google,scarlet-rev15-sku2", "google,scarlet-rev15-sku4", + "google,scarlet-rev15-sku6", "google,scarlet-rev15", + "google,scarlet-rev14-sku2", "google,scarlet-rev14-sku4", "google,scarlet-rev14-sku6", "google,scarlet-rev14", + "google,scarlet-rev13-sku2", "google,scarlet-rev13-sku4", "google,scarlet-rev13-sku6", "google,scarlet-rev13", + "google,scarlet-rev12-sku2", "google,scarlet-rev12-sku4", "google,scarlet-rev12-sku6", "google,scarlet-rev12", + "google,scarlet-rev11-sku2", "google,scarlet-rev11-sku4", "google,scarlet-rev11-sku6", "google,scarlet-rev11", + "google,scarlet-rev10-sku2", "google,scarlet-rev10-sku4", "google,scarlet-rev10-sku6", "google,scarlet-rev10", + "google,scarlet-rev9-sku2", "google,scarlet-rev9-sku4", "google,scarlet-rev9-sku6", "google,scarlet-rev9", + "google,scarlet-rev8-sku2", "google,scarlet-rev8-sku4", "google,scarlet-rev8-sku6", "google,scarlet-rev8", + "google,scarlet-rev7-sku2", "google,scarlet-rev7-sku4", "google,scarlet-rev7-sku6", "google,scarlet-rev7", + "google,scarlet-rev6-sku2", "google,scarlet-rev6-sku4", "google,scarlet-rev6-sku6", "google,scarlet-rev6", + "google,scarlet-rev5-sku2", "google,scarlet-rev5-sku4", "google,scarlet-rev5-sku6", "google,scarlet-rev5", + "google,scarlet-rev4-sku2", "google,scarlet-rev4-sku4", "google,scarlet-rev4-sku6", "google,scarlet-rev4", "google,scarlet", "google,gru", "rockchip,rk3399"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi index 40d4053fba80..ed3348b558f8 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi @@ -768,6 +768,16 @@ camera: &i2c7 { <4 RK_PA0 1 &pcfg_pull_none_6ma>; }; +&i2s0_8ch_bus_bclk_off { + rockchip,pins = + <3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none_6ma>, + <3 RK_PD1 1 &pcfg_pull_none_6ma>, + <3 RK_PD2 1 &pcfg_pull_none_6ma>, + <3 RK_PD3 1 &pcfg_pull_none_6ma>, + <3 RK_PD7 1 &pcfg_pull_none_6ma>, + <4 RK_PA0 1 &pcfg_pull_none_6ma>; +}; + /* there is no external pull up, so need to set this pin pull up */ &sdmmc_cd_pin { rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s-enterprise.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s-enterprise.dts new file mode 100644 index 000000000000..a23d11ca0eb6 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s-enterprise.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; +#include "rk3399-nanopi-r4s.dts" + +/ { + model = "FriendlyElec NanoPi R4S Enterprise Edition"; + compatible = "friendlyarm,nanopi-r4s-enterprise", "rockchip,rk3399"; +}; + +&gmac { + nvmem-cells = <&mac_address>; + nvmem-cell-names = "mac-address"; +}; + +&i2c2 { + eeprom@51 { + compatible = "microchip,24c02", "atmel,24c02"; + reg = <0x51>; + pagesize = <16>; + size = <256>; + #address-cells = <1>; + #size-cells = <1>; + + mac_address: mac-address@fa { + reg = <0xfa 0x06>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts new file mode 100644 index 000000000000..2e058c315025 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts @@ -0,0 +1,398 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Martijn Braam <martijn@brixit.nl> + * Copyright (c) 2021 Kamil TrzciÅ„ski <ayufan@ayufan.eu> + */ + +/* + * PinePhone Pro datasheet: + * https://files.pine64.org/doc/PinePhonePro/PinephonePro-Schematic-V1.0-20211127.pdf + */ + +/dts-v1/; +#include <dt-bindings/input/linux-event-codes.h> +#include "rk3399.dtsi" +#include "rk3399-opp.dtsi" + +/ { + model = "Pine64 PinePhonePro"; + compatible = "pine64,pinephone-pro", "rockchip,rk3399"; + chassis-type = "handset"; + + aliases { + mmc0 = &sdio0; + mmc1 = &sdmmc; + mmc2 = &sdhci; + }; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pwrbtn_pin>; + + key-power { + debounce-interval = <20>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; + label = "Power"; + linux,code = <KEY_POWER>; + wakeup-source; + }; + }; + + vcc_sys: vcc-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-always-on; + regulator-boot-on; + }; + + vcc3v3_sys: vcc3v3-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_sys>; + }; + + vcca1v8_s3: vcc1v8-s3-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcca1v8_s3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc3v3_sys>; + regulator-always-on; + regulator-boot-on; + }; + + vcc1v8_codec: vcc1v8-codec-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc1v8_codec_en>; + regulator-name = "vcc1v8_codec"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc3v3_sys>; + }; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_b>; +}; + +&emmc_phy { + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <168>; + i2c-scl-falling-time-ns = <4>; + status = "okay"; + + rk818: pmic@1c { + compatible = "rockchip,rk818"; + reg = <0x1c>; + interrupt-parent = <&gpio1>; + interrupts = <RK_PC5 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc_sys>; + vcc9-supply = <&vcc3v3_sys>; + + regulators { + vdd_cpu_l: DCDC_REG1 { + regulator-name = "vdd_cpu_l"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <875000>; + regulator-max-microvolt = <975000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_center: DCDC_REG2 { + regulator-name = "vdd_center"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG4 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcca3v0_codec: LDO_REG1 { + regulator-name = "vcca3v0_codec"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + vcc3v0_touch: LDO_REG2 { + regulator-name = "vcc3v0_touch"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + vcca1v8_codec: LDO_REG3 { + regulator-name = "vcca1v8_codec"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + rk818_pwr_on: LDO_REG4 { + regulator-name = "rk818_pwr_on"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_3v0: LDO_REG5 { + regulator-name = "vcc_3v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-name = "vcc_1v5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc1v8_dvp: LDO_REG7 { + regulator-name = "vcc1v8_dvp"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vcc3v3_s3: LDO_REG8 { + regulator-name = "vcc3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG9 { + regulator-name = "vccio_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vcc3v3_s0: SWITCH_REG { + regulator-name = "vcc3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + }; + }; + + vdd_cpu_b: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&vsel1_pin>; + regulator-name = "vdd_cpu_b"; + regulator-min-microvolt = <875000>; + regulator-max-microvolt = <1150000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: regulator@41 { + compatible = "silergy,syr828"; + reg = <0x41>; + fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&vsel2_pin>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <875000>; + regulator-max-microvolt = <975000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&cluster0_opp { + opp04 { + status = "disabled"; + }; + + opp05 { + status = "disabled"; + }; +}; + +&cluster1_opp { + opp06 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <1100000 1100000 1150000>; + }; + + opp07 { + status = "disabled"; + }; +}; + +&io_domains { + bt656-supply = <&vcc1v8_dvp>; + audio-supply = <&vcca1v8_codec>; + sdmmc-supply = <&vccio_sd>; + gpio1830-supply = <&vcc_3v0>; + status = "okay"; +}; + +&pmu_io_domains { + pmu1830-supply = <&vcc_1v8>; + status = "okay"; +}; + +&pinctrl { + buttons { + pwrbtn_pin: pwrbtn-pin { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + vsel1_pin: vsel1-pin { + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + vsel2_pin: vsel2-pin { + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + sound { + vcc1v8_codec_en: vcc1v8-codec-en { + rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; +}; + +&sdmmc { + bus-width = <4>; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; + disable-wp; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; + vmmc-supply = <&vcc3v3_sys>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + status = "okay"; +}; + +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <1>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi index b1ac3a89f259..aa3e21bd6c8f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi @@ -62,7 +62,6 @@ vcc5v0_host: vcc5v0-host-regulator { compatible = "regulator-fixed"; gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>; - enable-active-low; pinctrl-names = "default"; pinctrl-0 = <&vcc5v0_host_en>; regulator-name = "vcc5v0_host"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi index acb174d3a8c5..2f4b1b2e3ac7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi @@ -271,6 +271,8 @@ }; &hdmi { + avdd-0v9-supply = <&vcca0v9_hdmi>; + avdd-1v8-supply = <&vcca1v8_hdmi>; ddc-i2c-bus = <&i2c3>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_cec>; @@ -369,8 +371,8 @@ }; }; - vcc1v8_hdmi: LDO_REG2 { - regulator-name = "vcc1v8_hdmi"; + vcca1v8_hdmi: LDO_REG2 { + regulator-name = "vcca1v8_hdmi"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts new file mode 100644 index 000000000000..f9884902f874 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts @@ -0,0 +1,703 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd + * Copyright (c) 2019 Radxa Limited + * Copyright (c) 2022 Amarula Solutions(India) + */ + +/dts-v1/; +#include <dt-bindings/leds/common.h> +#include "rk3399.dtsi" +#include "rk3399-t-opp.dtsi" + +/ { + model = "Radxa ROCK 4C+"; + compatible = "radxa,rock-4c-plus", "rockchip,rk3399"; + + aliases { + mmc0 = &sdmmc; + mmc1 = &sdhci; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + clkin_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "clkin_gmac"; + #clock-cells = <0>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&user_led1 &user_led2>; + + /* USER_LED1 */ + led-0 { + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + /* USER_LED2 */ + led-1 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk809 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; + }; + + vcc_3v3: vcc-3v3-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc3v3_sys>; + }; + + vcc3v3_phy1: vcc3v3-phy1-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_phy1"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3>; + }; + + vcc5v0_host1: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en>; + regulator-name = "vcc5v0_host1"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_host0_s0>; + }; + + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc5v0_typec: vcc5v0-typec-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_typec0_en>; + regulator-name = "vcc5v0_typec"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + }; + + vdd_log: vdd-log-regulator { + compatible = "regulator-fixed"; + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <950000>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_b>; +}; + +&emmc_phy { + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_RMII_SRC>; + assigned-clock-parents = <&clkin_gmac>; + clock_in_out = "input"; + phy-supply = <&vcc3v3_phy1>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + tx_delay = <0x2a>; + rx_delay = <0x21>; + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi { + avdd-0v9-supply = <&vcc_0v9_s0>; + avdd-1v8-supply = <&vcc_1v8_s0>; + ddc-i2c-bus = <&i2c3>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec>; + status = "okay"; +}; + +&hdmi_sound { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + i2c-scl-falling-time-ns = <30>; + i2c-scl-rising-time-ns = <180>; + clock-frequency = <400000>; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <RK_PC5 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "rk808-clkout1", "rk808-clkout2"; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc_buck5_s3>; + vcc6-supply = <&vcc_buck5_s3>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc5v0_sys>; + + regulators { + vdd_center: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-initial-mode = <0x2>; + regulator-name = "vdd_center"; + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + regulator-name = "vdd_cpu_l"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_ddr"; + regulator-initial-mode = <0x2>; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc3v3_sys: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <0x2>; + regulator-name = "vcc3v3_sys"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_buck5_s3: DCDC_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_buck5_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_0v9_s3: LDO_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vcc_0v9_s3"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_0v9_s0: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vcc_0v9_s0"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vcc_1v8_s0: LDO_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_mipi: LDO_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc_mipi"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v5_s0: LDO_REG6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc_1v5_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v0_s0: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc_3v0_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_sdio_s0: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_sdio_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_cam: LDO_REG9 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_cam"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc5v0_host0_s0: SWITCH_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc5v0_host0_s0"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + lcd_3v3: SWITCH_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-name = "lcd_3v3"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + + vdd_cpu_b: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + regulator-compatible = "fan53555-reg"; + pinctrl-0 = <&vsel1_gpio>; + vsel-gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>; + regulator-name = "vdd_cpu_b"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: regulator@41 { + compatible = "silergy,syr828"; + reg = <0x41>; + fcs,suspend-voltage-selector = <1>; + regulator-compatible = "fan53555-reg"; + pinctrl-0 = <&vsel2_gpio>; + vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + regulator-initial-mode = <1>; /* 1:force PWM 2:auto */ + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c3 { + i2c-scl-rising-time-ns = <450>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2s2 { + status = "okay"; +}; + +&io_domains { + audio-supply = <&vcc_1v8_s0>; + bt656-supply = <&vcc_3v0_s0>; + gpio1830-supply = <&vcc_3v0_s0>; + sdmmc-supply = <&vcc_sdio_s0>; + status = "okay"; +}; + +&pinctrl { + bt { + bt_enable_h: bt-enable-h { + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_l: bt-wake-l { + rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + user_led1: user-led1 { + rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + user_led2: user-led2 { + rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + vsel1_gpio: vsel1-gpio { + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + vsel2_gpio: vsel2-gpio { + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + sdmmc { + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = <4 8 1 &pcfg_pull_up_8ma>, + <4 9 1 &pcfg_pull_up_8ma>, + <4 10 1 &pcfg_pull_up_8ma>, + <4 11 1 &pcfg_pull_up_8ma>; + }; + + sdmmc_clk: sdmmc-clk { + rockchip,pins = <4 12 1 &pcfg_pull_none_18ma>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = <4 13 1 &pcfg_pull_up_8ma>; + }; + }; + + usb-typec { + vcc5v0_typec0_en: vcc5v0-typec-en { + rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb2 { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + wifi { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wifi_host_wake_l: wifi-host-wake-l { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pmu_io_domains { + pmu1830-supply = <&vcc_3v0_s0>; + status = "okay"; +}; + +&saradc { + status = "okay"; + vref-supply = <&vcc_1v8_s3>; +}; + +&sdhci { + max-frequency = <150000000>; + bus-width = <8>; + mmc-hs400-1_8v; + non-removable; + mmc-hs400-enhanced-strobe; + status = "okay"; +}; + +&sdio0 { + #address-cells = <1>; + #size-cells = <0>; + bus-width = <4>; + clock-frequency = <50000000>; + cap-sdio-irq; + cap-sd-highspeed; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; + sd-uhs-sdr104; + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake_l>; + }; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <800>; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; + cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; + vqmmc-supply = <&vcc_sdio_s0>; + status = "okay"; +}; + +&tcphy0 { + status = "okay"; +}; + +&tcphy1 { + status = "okay"; +}; + +&u2phy0 { + status = "okay"; + + u2phy0_otg: otg-port { + status = "okay"; + }; + + u2phy0_host: host-port { + phy-supply = <&vcc5v0_host1>; + status = "okay"; + }; +}; + +&u2phy1 { + status = "okay"; + + u2phy1_otg: otg-port { + status = "okay"; + }; + + u2phy1_host: host-port { + phy-supply = <&vcc5v0_host1>; + status = "okay"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm4345c5"; + clocks = <&rk809 1>; + clock-names = "lpo"; + device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; + max-speed = <1500000>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; + vbat-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_1v8_s3>; + }; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usbdrd3_0 { + extcon = <&u2phy0>; + status = "okay"; +}; + +&usbdrd_dwc3_0 { + status = "okay"; + dr_mode = "host"; +}; + +&usbdrd3_1 { + status = "okay"; +}; + +&usbdrd_dwc3_1 { + status = "okay"; + dr_mode = "host"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi index 401e1ae9d944..645ced6617a6 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi @@ -6,6 +6,7 @@ /dts-v1/; #include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/leds/common.h> #include <dt-bindings/pwm/pwm.h> #include "rk3399.dtsi" #include "rk3399-opp.dtsi" @@ -27,6 +28,20 @@ #clock-cells = <0>; }; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&user_led2>; + + /* USER_LED2 */ + led-0 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + sdio_pwrseq: sdio-pwrseq { compatible = "mmc-pwrseq-simple"; clocks = <&rk808 1>; @@ -59,32 +74,33 @@ }; }; - vcc12v_dcin: dc-12v { + vbus_typec: vbus-typec-regulator { compatible = "regulator-fixed"; - regulator-name = "vcc12v_dcin"; + enable-active-high; + gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_typec_en>; + regulator-name = "vbus_typec"; regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; + vin-supply = <&vcc5v0_sys>; }; - vcc5v0_sys: vcc-sys { + vcc12v_dcin: dc-12v { compatible = "regulator-fixed"; - regulator-name = "vcc5v0_sys"; + regulator-name = "vcc12v_dcin"; regulator-always-on; regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc12v_dcin>; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; }; - vcc_0v9: vcc-0v9 { + vcc3v3_lan: vcc3v3-lan-regulator { compatible = "regulator-fixed"; - regulator-name = "vcc_0v9"; + regulator-name = "vcc3v3_lan"; regulator-always-on; regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; vin-supply = <&vcc3v3_sys>; }; @@ -121,24 +137,24 @@ vin-supply = <&vcc5v0_sys>; }; - vcc5v0_typec: vcc5v0-typec-regulator { + vcc5v0_sys: vcc-sys { compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_typec_en>; - regulator-name = "vcc5v0_typec"; + regulator-name = "vcc5v0_sys"; regulator-always-on; - vin-supply = <&vcc5v0_sys>; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; }; - vcc_lan: vcc3v3-phy-regulator { + vcc_0v9: vcc-0v9 { compatible = "regulator-fixed"; - regulator-name = "vcc_lan"; + regulator-name = "vcc_0v9"; regulator-always-on; regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + vin-supply = <&vcc3v3_sys>; }; vdd_log: vdd-log { @@ -185,7 +201,7 @@ assigned-clocks = <&cru SCLK_RMII_SRC>; assigned-clock-parents = <&clkin_gmac>; clock_in_out = "input"; - phy-supply = <&vcc_lan>; + phy-supply = <&vcc3v3_lan>; phy-mode = "rgmii"; pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins>; @@ -203,6 +219,8 @@ }; &hdmi { + avdd-0v9-supply = <&vcca0v9_hdmi>; + avdd-1v8-supply = <&vcca1v8_hdmi>; ddc-i2c-bus = <&i2c3>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_cec>; @@ -290,8 +308,8 @@ }; }; - vcc1v8_codec: LDO_REG1 { - regulator-name = "vcc1v8_codec"; + vcca1v8_codec: LDO_REG1 { + regulator-name = "vcca1v8_codec"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; @@ -301,8 +319,8 @@ }; }; - vcc1v8_hdmi: LDO_REG2 { - regulator-name = "vcc1v8_hdmi"; + vcca1v8_hdmi: LDO_REG2 { + regulator-name = "vcca1v8_hdmi"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; @@ -359,8 +377,8 @@ }; }; - vcc0v9_hdmi: LDO_REG7 { - regulator-name = "vcc0v9_hdmi"; + vcca0v9_hdmi: LDO_REG7 { + regulator-name = "vcca0v9_hdmi"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <900000>; @@ -499,21 +517,10 @@ }; &io_domains { - status = "okay"; - + audio-supply = <&vcca1v8_codec>; bt656-supply = <&vcc_3v0>; - audio-supply = <&vcc1v8_codec>; - sdmmc-supply = <&vcc_sdio>; gpio1830-supply = <&vcc_3v0>; -}; - -&pmu_io_domains { - status = "okay"; - - pmu1830-supply = <&vcc_3v0>; -}; - -&pcie_phy { + sdmmc-supply = <&vcc_sdio>; status = "okay"; }; @@ -528,6 +535,10 @@ status = "okay"; }; +&pcie_phy { + status = "okay"; +}; + &pinctrl { bt { bt_enable_h: bt-enable-h { @@ -553,12 +564,32 @@ }; }; + leds { + user_led2: user-led2 { + rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pcie { pcie_pwr_en: pcie-pwr-en { rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + vsel1_pin: vsel1-pin { + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + vsel2_pin: vsel2-pin { + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + sdio0 { sdio0_bus4: sdio0-bus4 { rockchip,pins = <2 RK_PC4 1 &pcfg_pull_up_20ma>, @@ -576,20 +607,6 @@ }; }; - pmic { - pmic_int_l: pmic-int-l { - rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - - vsel1_pin: vsel1-pin { - rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; - }; - - vsel2_pin: vsel2-pin { - rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; - }; - }; - usb-typec { vcc5v0_typec_en: vcc5v0-typec-en { rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; @@ -613,6 +630,11 @@ }; }; +&pmu_io_domains { + pmu1830-supply = <&vcc_3v0>; + status = "okay"; +}; + &pwm2 { status = "okay"; }; @@ -623,6 +645,14 @@ vref-supply = <&vcc_1v8>; }; +&sdhci { + bus-width = <8>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + non-removable; + status = "okay"; +}; + &sdio0 { #address-cells = <1>; #size-cells = <0>; @@ -650,14 +680,6 @@ status = "okay"; }; -&sdhci { - bus-width = <8>; - mmc-hs400-1_8v; - mmc-hs400-enhanced-strobe; - non-removable; - status = "okay"; -}; - &spdif { spdif_p0: port { @@ -739,13 +761,13 @@ status = "okay"; }; -&usbdrd_dwc3_0 { +&usbdrd3_1 { status = "okay"; - dr_mode = "host"; }; -&usbdrd3_1 { +&usbdrd_dwc3_0 { status = "okay"; + dr_mode = "host"; }; &usbdrd_dwc3_1 { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-t-opp.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-t-opp.dtsi new file mode 100644 index 000000000000..1ababadda9df --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-t-opp.dtsi @@ -0,0 +1,114 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd + * Copyright (c) 2022 Radxa Limited + */ + +/ { + cluster0_opp: opp-table-0 { + compatible = "operating-points-v2"; + opp-shared; + + opp00 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <875000 875000 1250000>; + clock-latency-ns = <40000>; + }; + opp01 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <875000 875000 1250000>; + }; + opp02 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <900000 900000 1250000>; + }; + opp03 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <975000 975000 1250000>; + }; + }; + + cluster1_opp: opp-table-1 { + compatible = "operating-points-v2"; + opp-shared; + + opp00 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <875000 875000 1250000>; + clock-latency-ns = <40000>; + }; + opp01 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <875000 875000 1250000>; + }; + opp02 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <875000 875000 1250000>; + }; + opp03 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <925000 925000 1250000>; + }; + opp04 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1000000 1000000 1250000>; + }; + opp05 { + opp-hz = /bits/ 64 <1416000000>; + opp-microvolt = <1075000 1075000 1250000>; + }; + opp06 { + opp-hz = /bits/ 64 <1512000000>; + opp-microvolt = <1150000 1150000 1250000>; + }; + }; + + gpu_opp_table: opp-table-2 { + compatible = "operating-points-v2"; + + opp00 { + opp-hz = /bits/ 64 <200000000>; + opp-microvolt = <875000 875000 1150000>; + }; + opp01 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <875000 875000 1150000>; + }; + opp02 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <875000 875000 1150000>; + }; + opp03 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <975000 975000 1150000>; + }; + }; +}; + +&cpu_l0 { + operating-points-v2 = <&cluster0_opp>; +}; + +&cpu_l1 { + operating-points-v2 = <&cluster0_opp>; +}; + +&cpu_l2 { + operating-points-v2 = <&cluster0_opp>; +}; + +&cpu_l3 { + operating-points-v2 = <&cluster0_opp>; +}; + +&cpu_b0 { + operating-points-v2 = <&cluster1_opp>; +}; + +&cpu_b1 { + operating-points-v2 = <&cluster1_opp>; +}; + +&gpu { + operating-points-v2 = <&gpu_opp_table>; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index 9d5b0e8c9cca..92c2207e686c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -1664,8 +1664,9 @@ dma-names = "tx", "rx"; clock-names = "i2s_clk", "i2s_hclk"; clocks = <&cru SCLK_I2S0_8CH>, <&cru HCLK_I2S0_8CH>; - pinctrl-names = "default"; + pinctrl-names = "bclk_on", "bclk_off"; pinctrl-0 = <&i2s0_8ch_bus>; + pinctrl-1 = <&i2s0_8ch_bus_bclk_off>; power-domains = <&power RK3399_PD_SDIOAUDIO>; #sound-dai-cells = <0>; status = "disabled"; @@ -1701,7 +1702,7 @@ vopl: vop@ff8f0000 { compatible = "rockchip,rk3399-vop-lit"; - reg = <0x0 0xff8f0000 0x0 0x3efc>; + reg = <0x0 0xff8f0000 0x0 0x2000>, <0x0 0xff8f2000 0x0 0x400>; interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH 0>; assigned-clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>; assigned-clock-rates = <400000000>, <100000000>; @@ -1757,7 +1758,7 @@ vopb: vop@ff900000 { compatible = "rockchip,rk3399-vop-big"; - reg = <0x0 0xff900000 0x0 0x3efc>; + reg = <0x0 0xff900000 0x0 0x2000>, <0x0 0xff902000 0x0 0x1000>; interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>; assigned-clocks = <&cru ACLK_VOP0>, <&cru HCLK_VOP0>; assigned-clock-rates = <400000000>, <100000000>; @@ -2409,6 +2410,19 @@ <3 RK_PD7 1 &pcfg_pull_none>, <4 RK_PA0 1 &pcfg_pull_none>; }; + + i2s0_8ch_bus_bclk_off: i2s0-8ch-bus-bclk-off { + rockchip,pins = + <3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>, + <3 RK_PD1 1 &pcfg_pull_none>, + <3 RK_PD2 1 &pcfg_pull_none>, + <3 RK_PD3 1 &pcfg_pull_none>, + <3 RK_PD4 1 &pcfg_pull_none>, + <3 RK_PD5 1 &pcfg_pull_none>, + <3 RK_PD6 1 &pcfg_pull_none>, + <3 RK_PD7 1 &pcfg_pull_none>, + <4 RK_PA0 1 &pcfg_pull_none>; + }; }; i2s1 { @@ -2420,6 +2434,15 @@ <4 RK_PA6 1 &pcfg_pull_none>, <4 RK_PA7 1 &pcfg_pull_none>; }; + + i2s1_2ch_bus_bclk_off: i2s1-2ch-bus-bclk-off { + rockchip,pins = + <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>, + <4 RK_PA4 1 &pcfg_pull_none>, + <4 RK_PA5 1 &pcfg_pull_none>, + <4 RK_PA6 1 &pcfg_pull_none>, + <4 RK_PA7 1 &pcfg_pull_none>; + }; }; sdio0 { diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353p.dts b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353p.dts new file mode 100644 index 000000000000..7a20e2d6876a --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353p.dts @@ -0,0 +1,94 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3566-anbernic-rgxx3.dtsi" + +/ { + model = "RG353P"; + compatible = "anbernic,rg353p", "rockchip,rk3566"; + + aliases { + mmc0 = &sdhci; + mmc1 = &sdmmc0; + mmc2 = &sdmmc1; + mmc3 = &sdmmc2; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + power-supply = <&vcc_sys>; + pwms = <&pwm4 0 25000 0>; + }; +}; + +&gpio_keys_control { + button-a { + gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>; + label = "EAST"; + linux,code = <BTN_EAST>; + }; + + button-left { + gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>; + label = "DPAD-LEFT"; + linux,code = <BTN_DPAD_LEFT>; + }; + + button-r1 { + gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>; + label = "TR"; + linux,code = <BTN_TR>; + }; + + button-r2 { + gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>; + label = "TR2"; + linux,code = <BTN_TR2>; + }; + + button-right { + gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>; + label = "DPAD-RIGHT"; + linux,code = <BTN_DPAD_RIGHT>; + }; + + button-y { + gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>; + label = "WEST"; + linux,code = <BTN_WEST>; + }; +}; + +&i2c0 { + /* This hardware is physically present but unused. */ + power-monitor@62 { + compatible = "cellwise,cw2015"; + reg = <0x62>; + status = "disabled"; + }; +}; + +&i2c2 { + pintctrl-names = "default"; + pinctrl-0 = <&i2c2m1_xfer>; + status = "okay"; +}; + +&pwm4 { + status = "okay"; +}; + +&sdhci { + pinctrl-0 = <&emmc_bus8>, <&emmc_clk>, <&emmc_cmd>, <&emmc_datastrobe>, <&emmc_rstnout>; + pinctrl-names = "default"; + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg503.dts b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg503.dts new file mode 100644 index 000000000000..3dc01549a5b4 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg503.dts @@ -0,0 +1,87 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3566-anbernic-rgxx3.dtsi" + +/ { + model = "RG503"; + compatible = "anbernic,rg503", "rockchip,rk3566"; + + aliases { + mmc0 = &sdmmc0; + mmc1 = &sdmmc1; + mmc2 = &sdmmc2; + }; + + gpio_spi: spi { + compatible = "spi-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&spi_pins>; + #address-cells = <1>; + #size-cells = <0>; + + sck-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>; + num-chipselects = <0>; + }; +}; + +&gpio_keys_control { + button-a { + gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>; + label = "EAST"; + linux,code = <BTN_EAST>; + }; + + button-left { + gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>; + label = "DPAD-LEFT"; + linux,code = <BTN_DPAD_LEFT>; + }; + + button-right { + gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>; + label = "DPAD-RIGHT"; + linux,code = <BTN_DPAD_RIGHT>; + }; + + button-r1 { + gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>; + label = "TR"; + linux,code = <BTN_TR>; + }; + + button-r2 { + gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>; + label = "TR2"; + linux,code = <BTN_TR2>; + }; + + button-right { + gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>; + label = "DPAD-RIGHT"; + linux,code = <BTN_DPAD_RIGHT>; + }; + + button-y { + gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>; + label = "WEST"; + linux,code = <BTN_WEST>; + }; +}; + +&pinctrl { + gpio-spi { + spi_pins: spi-pins { + rockchip,pins = + <4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>, + <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>, + <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi new file mode 100644 index 000000000000..2b455143b86d --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi @@ -0,0 +1,831 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> +#include "rk3566.dtsi" + +/ { + chosen: chosen { + stdout-path = "serial2:1500000n8"; + }; + + adc-joystick { + compatible = "adc-joystick"; + io-channels = <&adc_mux 0>, + <&adc_mux 1>, + <&adc_mux 2>, + <&adc_mux 3>; + pinctrl-0 = <&joy_mux_en>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + axis@0 { + reg = <0>; + abs-flat = <32>; + abs-fuzz = <32>; + abs-range = <1023 15>; + linux,code = <ABS_X>; + }; + + axis@1 { + reg = <1>; + abs-flat = <32>; + abs-fuzz = <32>; + abs-range = <15 1023>; + linux,code = <ABS_RX>; + }; + + axis@2 { + reg = <2>; + abs-flat = <32>; + abs-fuzz = <32>; + abs-range = <15 1023>; + linux,code = <ABS_Y>; + }; + + axis@3 { + reg = <3>; + abs-flat = <32>; + abs-fuzz = <32>; + abs-range = <1023 15>; + linux,code = <ABS_RY>; + }; + }; + + adc_keys: adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <60>; + + /* + * Button is mapped to F key in BSP kernel, but + * according to input guidelines it should be mode. + */ + button-mode { + label = "MODE"; + linux,code = <BTN_MODE>; + press-threshold-microvolt = <1750>; + }; + }; + + adc_mux: adc-mux { + compatible = "io-channel-mux"; + channels = "left_x", "right_x", "left_y", "right_y"; + #io-channel-cells = <1>; + io-channels = <&saradc 3>; + io-channel-names = "parent"; + mux-controls = <&gpio_mux>; + settle-time-us = <100>; + }; + + gpio_keys_control: gpio-keys-control { + compatible = "gpio-keys"; + pinctrl-0 = <&btn_pins_ctrl>; + pinctrl-names = "default"; + + button-b { + gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_LOW>; + label = "SOUTH"; + linux,code = <BTN_SOUTH>; + }; + + button-down { + gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_LOW>; + label = "DPAD-DOWN"; + linux,code = <BTN_DPAD_DOWN>; + }; + + button-l1 { + gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>; + label = "TL"; + linux,code = <BTN_TL>; + }; + + button-l2 { + gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>; + label = "TL2"; + linux,code = <BTN_TL2>; + }; + + button-select { + gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_LOW>; + label = "SELECT"; + linux,code = <BTN_SELECT>; + }; + + button-start { + gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_LOW>; + label = "START"; + linux,code = <BTN_START>; + }; + + button-thumbl { + gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>; + label = "THUMBL"; + linux,code = <BTN_THUMBL>; + }; + + button-thumbr { + gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>; + label = "THUMBR"; + linux,code = <BTN_THUMBR>; + }; + + button-up { + gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>; + label = "DPAD-UP"; + linux,code = <BTN_DPAD_UP>; + }; + + button-x { + gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>; + label = "NORTH"; + linux,code = <BTN_NORTH>; + }; + }; + + gpio_keys_vol: gpio-keys-vol { + compatible = "gpio-keys"; + autorepeat; + pinctrl-0 = <&btn_pins_vol>; + pinctrl-names = "default"; + + button-vol-down { + gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>; + label = "VOLUMEDOWN"; + linux,code = <KEY_VOLUMEDOWN>; + }; + + button-vol-up { + gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>; + label = "VOLUMEUP"; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + gpio_mux: mux-controller { + compatible = "gpio-mux"; + mux-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>, + <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>; + #mux-control-cells = <0>; + }; + + hdmi-con { + compatible = "hdmi-connector"; + ddc-i2c-bus = <&i2c5>; + type = "c"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + leds: gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&led_pins>; + pinctrl-names = "default"; + + green_led: led-0 { + color = <LED_COLOR_ID_GREEN>; + default-state = "on"; + function = LED_FUNCTION_POWER; + gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>; + }; + + amber_led: led-1 { + color = <LED_COLOR_ID_AMBER>; + function = LED_FUNCTION_CHARGING; + gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; + retain-state-suspended; + }; + + red_led: led-2 { + color = <LED_COLOR_ID_RED>; + default-state = "off"; + function = LED_FUNCTION_STATUS; + gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; + }; + }; + + /* Channels reversed for both headphones and speakers. */ + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "anbernic_rk817"; + simple-audio-card,aux-devs = <&spk_amp>; + simple-audio-card,format = "i2s"; + simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Headphone", "Headphones", + "Speaker", "Internal Speakers"; + simple-audio-card,routing = + "MICL", "Mic Jack", + "Headphones", "HPOL", + "Headphones", "HPOR", + "Internal Speakers", "Speaker Amp OUTL", + "Internal Speakers", "Speaker Amp OUTR", + "Speaker Amp INL", "HPOL", + "Speaker Amp INR", "HPOR"; + simple-audio-card,pin-switches = "Internal Speakers"; + + simple-audio-card,codec { + sound-dai = <&rk817>; + }; + + simple-audio-card,cpu { + sound-dai = <&i2s1_8ch>; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk817 1>; + clock-names = "ext_clock"; + pinctrl-0 = <&wifi_enable_h>; + pinctrl-names = "default"; + post-power-on-delay-ms = <200>; + reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_LOW>; + }; + + spk_amp: audio-amplifier { + compatible = "simple-audio-amplifier"; + enable-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&spk_amp_enable_h>; + pinctrl-names = "default"; + sound-name-prefix = "Speaker Amp"; + }; + + vcc3v3_lcd0_n: regulator-vcc3v3-lcd0 { + compatible = "regulator-fixed"; + gpio = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-0 = <&vcc_lcd_h>; + pinctrl-names = "default"; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3_lcd0_n"; + vin-supply = <&vcc_3v3>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_sys: regulator-vcc-sys { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3800000>; + regulator-max-microvolt = <3800000>; + regulator-name = "vcc_sys"; + }; + + vcc_wifi: regulator-vcc-wifi { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&vcc_wifi_h>; + pinctrl-names = "default"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_wifi"; + }; + + vibrator: pwm-vibrator { + compatible = "pwm-vibrator"; + pwm-names = "enable"; + pwms = <&pwm5 0 1000000000 0>; + }; +}; + +&combphy1 { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c5>; + pinctrl-0 = <&hdmitxm0_cec>; + pinctrl-names = "default"; + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdmi_sound { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + rk817: pmic@20 { + compatible = "rockchip,rk817"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; + clock-output-names = "rk808-clkout1", "rk808-clkout2"; + clock-names = "mclk"; + clocks = <&cru I2S1_MCLKOUT_TX>; + assigned-clocks = <&cru I2S1_MCLKOUT_TX>; + assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; + #clock-cells = <1>; + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s1m0_mclk>, <&pmic_int_l>; + wakeup-source; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc5-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc_sys>; + vcc8-supply = <&vcc_sys>; + vcc9-supply = <&dcdc_boost>; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-init-microvolt = <900000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + regulator-name = "vdd_logic"; + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-init-microvolt = <900000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + regulator-name = "vdd_gpu"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + regulator-name = "vcc_ddr"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_3v3: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <0x2>; + regulator-name = "vcc_3v3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca1v8_pmu: LDO_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdda_0v9: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdda_0v9"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_pmu: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdda0v9_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vccio_acodec: LDO_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_acodec"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_pmu: LDO_REG6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_1v8: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc1v8_dvp: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc1v8_dvp"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc2v8_dvp: LDO_REG9 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "vcc2v8_dvp"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + dcdc_boost: BOOST { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <4700000>; + regulator-max-microvolt = <5400000>; + regulator-name = "boost"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + otg_switch: OTG_SWITCH { + regulator-name = "otg_switch"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + + vdd_cpu: regulator@40 { + compatible = "fcs,fan53555"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1390000>; + regulator-init-microvolt = <900000>; + regulator-name = "vdd_cpu"; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc_sys>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c1 { + /* Unknown/unused device at 0x3c */ + status = "disabled"; +}; + +&i2c5 { + pinctrl-0 = <&i2c5m1_xfer>; + pinctrl-names = "default"; + status = "okay"; +}; + +&i2s0_8ch { + status = "okay"; +}; + +&i2s1_8ch { + pinctrl-0 = <&i2s1m0_sclktx + &i2s1m0_lrcktx + &i2s1m0_sdi0 + &i2s1m0_sdo0>; + pinctrl-names = "default"; + rockchip,trcm-sync-tx-only; + status = "okay"; +}; + +&pinctrl { + audio-amplifier { + spk_amp_enable_h: spk-amp-enable-h { + rockchip,pins = + <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + gpio-btns { + btn_pins_ctrl: btn-pins-ctrl { + rockchip,pins = + <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + btn_pins_vol: btn-pins-vol { + rockchip,pins = + <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + gpio-led { + led_pins: led-pins { + rockchip,pins = + <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>, + <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>, + <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + joy-mux { + joy_mux_en: joy-mux-en { + rockchip,pins = + <0 RK_PB5 RK_FUNC_GPIO &pcfg_output_low>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = + <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = + <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + vcc3v3-lcd { + vcc_lcd_h: vcc-lcd-h { + rockchip,pins = + <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + vcc-wifi { + vcc_wifi_h: vcc-wifi-h { + rockchip,pins = + <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pmu_io_domains { + status = "okay"; + pmuio1-supply = <&vcc3v3_pmu>; + pmuio2-supply = <&vcc3v3_pmu>; + vccio1-supply = <&vccio_acodec>; + vccio3-supply = <&vccio_sd>; + vccio4-supply = <&vcc_1v8>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc1v8_dvp>; + vccio7-supply = <&vcc_3v3>; +}; + +&pwm5 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdmmc0 { + bus-width = <4>; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; + disable-wp; + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; + pinctrl-names = "default"; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&sdmmc1 { + bus-width = <4>; + cap-sd-highspeed; + cd-gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_LOW>; + disable-wp; + pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk &sdmmc1_det>; + pinctrl-names = "default"; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc1v8_dvp>; + status = "okay"; +}; + +&sdmmc2 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>; + pinctrl-names = "default"; + vmmc-supply = <&vcc_wifi>; + vqmmc-supply = <&vcca1v8_pmu>; + status = "okay"; +}; + +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +&uart1 { + pinctrl-0 = <&uart1m1_xfer &uart1m1_ctsn &uart1m1_rtsn>; + pinctrl-names = "default"; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "realtek,rtl8821cs-bt"; + device-wake-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>; + host-wake-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; + }; +}; + +&uart2 { + status = "okay"; +}; + +/* + * Lack the schematics to verify, but port works as a peripheral + * (and not a host or OTG port). + */ +&usb_host0_xhci { + dr_mode = "peripheral"; + phys = <&usb2phy0_otg>; + phy-names = "usb2-phy"; + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usb_host1_xhci { + phy-names = "usb2-phy", "usb3-phy"; + phys = <&usb2phy1_host>, <&combphy1 PHY_TYPE_USB3>; + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy0_otg { + status = "okay"; +}; + +&usb2phy1 { + status = "okay"; +}; + +&usb2phy1_host { + status = "okay"; +}; + +&vop { + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts index d943559b157c..a05460b92415 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts @@ -189,7 +189,6 @@ vcc3v3_sd: vcc3v3_sd { compatible = "regulator-fixed"; - enable-active-low; gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&vcc_sd_h>; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts index 02d5f5a8ca03..77b179cd20e7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts @@ -4,6 +4,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> #include "rk3566.dtsi" / { @@ -28,6 +29,17 @@ #clock-cells = <0>; }; + hdmi-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; @@ -42,6 +54,21 @@ }; }; + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,name = "Analog RK809"; + simple-audio-card,mclk-fs = <256>; + + simple-audio-card,cpu { + sound-dai = <&i2s1_8ch>; + }; + + simple-audio-card,codec { + sound-dai = <&rk809>; + }; + }; + sdio_pwrseq: sdio-pwrseq { status = "okay"; compatible = "mmc-pwrseq-simple"; @@ -54,6 +81,18 @@ power-off-delay-us = <5000000>; }; + vcc3v3_pcie_p: vcc3v3-pcie-p-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_enable_h>; + regulator-name = "vcc3v3_pcie_p"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3>; + }; + vcc5v0_in: vcc5v0-in-regulator { compatible = "regulator-fixed"; regulator-name = "vcc5v0_in"; @@ -113,6 +152,10 @@ status = "okay"; }; +&combphy2 { + status = "okay"; +}; + &cpu0 { cpu-supply = <&vdd_cpu>; }; @@ -152,6 +195,33 @@ status = "okay"; }; +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi { + avdd-0v9-supply = <&vdda0v9_image>; + avdd-1v8-supply = <&vcca1v8_image>; + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdmi_sound { + status = "okay"; +}; + &i2c0 { status = "okay"; @@ -177,11 +247,16 @@ reg = <0x20>; interrupt-parent = <&gpio0>; interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>; + assigned-clocks = <&cru I2S1_MCLKOUT_TX>; + assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; + clock-names = "mclk"; + clocks = <&cru I2S1_MCLKOUT_TX>; clock-output-names = "rk808-clkout1", "rk808-clkout2"; pinctrl-names = "default"; - pinctrl-0 = <&pmic_int>; + pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>; rockchip,system-power-controller; + #sound-dai-cells = <0>; wakeup-source; #clock-cells = <1>; @@ -420,6 +495,20 @@ status = "disabled"; }; +&i2s0_8ch { + status = "okay"; +}; + +&i2s1_8ch { + pinctrl-names = "default"; + pinctrl-0 = <&i2s1m0_sclktx + &i2s1m0_lrcktx + &i2s1m0_sdi0 + &i2s1m0_sdo0>; + rockchip,trcm-sync-tx-only; + status = "okay"; +}; + &mdio1 { rgmii_phy1: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; @@ -427,6 +516,14 @@ }; }; +&pcie2x1 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_reset_h>; + reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie_p>; + status = "okay"; +}; + &pinctrl { bt { bt_enable_h: bt-enable-h { @@ -448,6 +545,16 @@ }; }; + pcie { + pcie_enable_h: pcie-enable-h { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie_reset_h: pcie-reset-h { + rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pmic { pmic_int: pmic_int { rockchip,pins = @@ -506,7 +613,7 @@ disable-wp; pinctrl-names = "default"; pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; - sd-uhs-sdr104; + sd-uhs-sdr50; vmmc-supply = <&vcc3v3_sd>; vqmmc-supply = <&vccio_sd>; status = "okay"; @@ -613,3 +720,20 @@ &usb_host0_ohci { status = "okay"; }; + +&vop { + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts index 57759b66d44d..dba648c2f57e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts @@ -4,6 +4,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> #include "rk3566.dtsi" / { @@ -27,6 +28,17 @@ #clock-cells = <0>; }; + hdmi-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; @@ -149,6 +161,29 @@ status = "okay"; }; +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi { + avdd-0v9-supply = <&vdda0v9_image>; + avdd-1v8-supply = <&vcca1v8_image>; + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { status = "okay"; @@ -577,3 +612,20 @@ &usb_host0_ohci { status = "okay"; }; + +&vop { + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts index 5e34bd0b214d..c282f6e79960 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts @@ -46,7 +46,7 @@ }; }; - dc_12v: dc-12v { + dc_12v: dc-12v-regulator { compatible = "regulator-fixed"; regulator-name = "dc_12v"; regulator-always-on; @@ -66,7 +66,7 @@ }; }; - vcc3v3_sys: vcc3v3-sys { + vcc3v3_sys: vcc3v3-sys-regulator { compatible = "regulator-fixed"; regulator-name = "vcc3v3_sys"; regulator-always-on; @@ -76,7 +76,7 @@ vin-supply = <&dc_12v>; }; - vcc5v0_sys: vcc5v0-sys { + vcc5v0_sys: vcc5v0-sys-regulator { compatible = "regulator-fixed"; regulator-name = "vcc5v0_sys"; regulator-always-on; @@ -86,7 +86,67 @@ vin-supply = <&dc_12v>; }; - vcc5v0_usb: vcc5v0_usb { + pcie30_avdd0v9: pcie30-avdd0v9-regulator { + compatible = "regulator-fixed"; + regulator-name = "pcie30_avdd0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + vin-supply = <&vcc3v3_sys>; + }; + + pcie30_avdd1v8: pcie30-avdd1v8-regulator { + compatible = "regulator-fixed"; + regulator-name = "pcie30_avdd1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc3v3_sys>; + }; + + /* pi6c pcie clock generator feeds both ports */ + vcc3v3_pi6c_05: vcc3v3-pi6c-05-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_pcie"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; + startup-delay-us = <200000>; + vin-supply = <&vcc5v0_sys>; + }; + + /* actually fed by vcc3v3_sys, dependent on pi6c clock generator */ + vcc3v3_minipcie: vcc3v3-minipcie-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_minipcie"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&minipcie_enable_h>; + startup-delay-us = <50000>; + vin-supply = <&vcc3v3_pi6c_05>; + }; + + /* actually fed by vcc3v3_sys, dependent on pi6c clock generator */ + vcc3v3_ngff: vcc3v3-ngff-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_ngff"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&ngffpcie_enable_h>; + startup-delay-us = <50000>; + vin-supply = <&vcc3v3_pi6c_05>; + }; + + vcc5v0_usb: vcc5v0-usb-regulator { compatible = "regulator-fixed"; regulator-name = "vcc5v0_usb"; regulator-always-on; @@ -96,7 +156,7 @@ vin-supply = <&dc_12v>; }; - vcc5v0_usb_host: vcc5v0-usb-host { + vcc5v0_usb_host: vcc5v0-usb-host-regulator { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; @@ -108,7 +168,7 @@ vin-supply = <&vcc5v0_usb>; }; - vcc5v0_usb_otg: vcc5v0-usb-otg { + vcc5v0_usb_otg: vcc5v0-usb-otg-regulator { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; @@ -513,6 +573,32 @@ }; }; +&pcie30phy { + data-lanes = <1 2>; + phy-supply = <&vcc3v3_pi6c_05>; + status = "okay"; +}; + +&pcie3x1 { + /* M.2 slot */ + num-lanes = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&ngffpcie_reset_h>; + reset-gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_ngff>; + status = "okay"; +}; + +&pcie3x2 { + /* mPCIe slot */ + num-lanes = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&minipcie_reset_h>; + reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_minipcie>; + status = "okay"; +}; + &pinctrl { leds { blue_led_pin: blue-led-pin { @@ -529,6 +615,24 @@ }; }; + pcie { + minipcie_enable_h: minipcie-enable-h { + rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none_drv_level_5>; + }; + + ngffpcie_enable_h: ngffpcie-enable-h { + rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none_drv_level_5>; + }; + + minipcie_reset_h: minipcie-reset-h { + rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none_drv_level_5>; + }; + + ngffpcie_reset_h: ngffpcie-reset-h { + rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none_drv_level_5>; + }; + }; + pmic { pmic_int: pmic_int { rockchip,pins = @@ -678,7 +782,7 @@ }; &usb_host0_xhci { - extcon = <&usb2phy0>; + dr_mode = "host"; status = "okay"; }; @@ -708,6 +812,19 @@ status = "okay"; }; +&usb2phy1 { + /* USB for PCIe/M2 */ + status = "okay"; +}; + +&usb2phy1_host { + status = "okay"; +}; + +&usb2phy1_otg { + status = "okay"; +}; + &vop { assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts index 6ff89ff95ad1..674792567fa6 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts @@ -656,7 +656,7 @@ }; &usb2phy0_otg { - vbus-supply = <&vcc5v0_usb_otg>; + phy-supply = <&vcc5v0_usb_otg>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts index 6b5093a1a6cf..fb87a168fe96 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts @@ -67,6 +67,18 @@ regulator-boot-on; }; + vcc3v3_pcie: vcc3v3-pcie-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_enable_h>; + regulator-name = "vcc3v3_pcie"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; + vcc3v3_sys: vcc3v3-sys { compatible = "regulator-fixed"; regulator-name = "vcc3v3_sys"; @@ -131,6 +143,38 @@ regulator-max-microvolt = <5000000>; vin-supply = <&vcc5v0_usb>; }; + + vcc_cam: vcc-cam { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc_cam_en>; + regulator-name = "vcc_cam"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc3v3_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_mipi: vcc-mipi { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc_mipi_en>; + regulator-name = "vcc_mipi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc3v3_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; }; &combphy0 { @@ -141,6 +185,10 @@ status = "okay"; }; +&combphy2 { + status = "okay"; +}; + &cpu0 { cpu-supply = <&vdd_cpu>; }; @@ -440,6 +488,35 @@ }; }; +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3m1_xfer>; + status = "disabled"; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4m1_xfer>; + status = "disabled"; +}; + +&i2c5 { + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "rtcic_32kout"; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + wakeup-source; + }; +}; + &i2s0_8ch { status = "okay"; }; @@ -461,19 +538,55 @@ }; }; +&pcie2x1 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_reset_h>; + reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + &pinctrl { + cam { + vcc_cam_en: vcc_cam_en { + rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + display { + vcc_mipi_en: vcc_mipi_en { + rockchip,pins = <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + ethernet { eth_phy_rst: eth_phy_rst { rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + leds { led_user_en: led_user_en { rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + pcie { + pcie_enable_h: pcie-enable-h { + rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie_reset_h: pcie-reset-h { + rockchip,pins = <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pmic { pmic_int: pmic_int { rockchip,pins = @@ -581,7 +694,7 @@ }; &usb2phy0_otg { - vbus-supply = <&vcc5v0_usb_otg>; + phy-supply = <&vcc5v0_usb_otg>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3568.dtsi b/arch/arm64/boot/dts/rockchip/rk3568.dtsi index 2bdf8c7e9765..ba67b58f05b7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3568.dtsi @@ -42,6 +42,128 @@ reg = <0x0 0xfe190200 0x0 0x20>; }; + pcie30_phy_grf: syscon@fdcb8000 { + compatible = "rockchip,rk3568-pcie3-phy-grf", "syscon"; + reg = <0x0 0xfdcb8000 0x0 0x10000>; + }; + + pcie30phy: phy@fe8c0000 { + compatible = "rockchip,rk3568-pcie3-phy"; + reg = <0x0 0xfe8c0000 0x0 0x20000>; + #phy-cells = <0>; + clocks = <&pmucru CLK_PCIE30PHY_REF_M>, <&pmucru CLK_PCIE30PHY_REF_N>, + <&cru PCLK_PCIE30PHY>; + clock-names = "refclk_m", "refclk_n", "pclk"; + resets = <&cru SRST_PCIE30PHY>; + reset-names = "phy"; + rockchip,phy-grf = <&pcie30_phy_grf>; + status = "disabled"; + }; + + pcie3x1: pcie@fe270000 { + compatible = "rockchip,rk3568-pcie"; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x0 0xf>; + clocks = <&cru ACLK_PCIE30X1_MST>, <&cru ACLK_PCIE30X1_SLV>, + <&cru ACLK_PCIE30X1_DBI>, <&cru PCLK_PCIE30X1>, + <&cru CLK_PCIE30X1_AUX_NDFT>; + clock-names = "aclk_mst", "aclk_slv", + "aclk_dbi", "pclk", "aux"; + device_type = "pci"; + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "sys", "pmc", "msg", "legacy", "err"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie3x1_intc 0>, + <0 0 0 2 &pcie3x1_intc 1>, + <0 0 0 3 &pcie3x1_intc 2>, + <0 0 0 4 &pcie3x1_intc 3>; + linux,pci-domain = <1>; + num-ib-windows = <6>; + num-ob-windows = <2>; + max-link-speed = <3>; + msi-map = <0x0 &gic 0x1000 0x1000>; + num-lanes = <1>; + phys = <&pcie30phy>; + phy-names = "pcie-phy"; + power-domains = <&power RK3568_PD_PIPE>; + reg = <0x3 0xc0400000 0x0 0x00400000>, + <0x0 0xfe270000 0x0 0x00010000>, + <0x3 0x7f000000 0x0 0x01000000>; + ranges = <0x01000000 0x0 0x3ef00000 0x3 0x7ef00000 0x0 0x00100000>, + <0x02000000 0x0 0x00000000 0x3 0x40000000 0x0 0x3ef00000>; + reg-names = "dbi", "apb", "config"; + resets = <&cru SRST_PCIE30X1_POWERUP>; + reset-names = "pipe"; + /* bifurcation; lane1 when using 1+1 */ + status = "disabled"; + + pcie3x1_intc: legacy-interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>; + }; + }; + + pcie3x2: pcie@fe280000 { + compatible = "rockchip,rk3568-pcie"; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x0 0xf>; + clocks = <&cru ACLK_PCIE30X2_MST>, <&cru ACLK_PCIE30X2_SLV>, + <&cru ACLK_PCIE30X2_DBI>, <&cru PCLK_PCIE30X2>, + <&cru CLK_PCIE30X2_AUX_NDFT>; + clock-names = "aclk_mst", "aclk_slv", + "aclk_dbi", "pclk", "aux"; + device_type = "pci"; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "sys", "pmc", "msg", "legacy", "err"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie3x2_intc 0>, + <0 0 0 2 &pcie3x2_intc 1>, + <0 0 0 3 &pcie3x2_intc 2>, + <0 0 0 4 &pcie3x2_intc 3>; + linux,pci-domain = <2>; + num-ib-windows = <6>; + num-ob-windows = <2>; + max-link-speed = <3>; + msi-map = <0x0 &gic 0x2000 0x1000>; + num-lanes = <2>; + phys = <&pcie30phy>; + phy-names = "pcie-phy"; + power-domains = <&power RK3568_PD_PIPE>; + reg = <0x3 0xc0800000 0x0 0x00400000>, + <0x0 0xfe280000 0x0 0x00010000>, + <0x3 0xbf000000 0x0 0x01000000>; + ranges = <0x01000000 0x0 0x3ef00000 0x3 0xbef00000 0x0 0x00100000>, + <0x02000000 0x0 0x00000000 0x3 0x80000000 0x0 0x3ef00000>; + reg-names = "dbi", "apb", "config"; + resets = <&cru SRST_PCIE30X2_POWERUP>; + reset-names = "pipe"; + /* bifurcation; lane0 when using 1+1 */ + status = "disabled"; + + pcie3x2_intc: legacy-interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 162 IRQ_TYPE_EDGE_RISING>; + }; + }; + gmac0: ethernet@fe2a0000 { compatible = "rockchip,rk3568-gmac", "snps,dwmac-4.20a"; reg = <0x0 0xfe2a0000 0x0 0x10000>; diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi index 319981c3e9f7..164708f1eb67 100644 --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi @@ -592,6 +592,46 @@ status = "disabled"; }; + vpu: video-codec@fdea0400 { + compatible = "rockchip,rk3568-vpu"; + reg = <0x0 0xfdea0000 0x0 0x800>; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>; + clock-names = "aclk", "hclk"; + iommus = <&vdpu_mmu>; + power-domains = <&power RK3568_PD_VPU>; + }; + + vdpu_mmu: iommu@fdea0800 { + compatible = "rockchip,rk3568-iommu"; + reg = <0x0 0xfdea0800 0x0 0x40>; + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "aclk", "iface"; + clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>; + power-domains = <&power RK3568_PD_VPU>; + #iommu-cells = <0>; + }; + + vepu: video-codec@fdee0000 { + compatible = "rockchip,rk3568-vepu"; + reg = <0x0 0xfdee0000 0x0 0x800>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_JENC>, <&cru HCLK_JENC>; + clock-names = "aclk", "hclk"; + iommus = <&vepu_mmu>; + power-domains = <&power RK3568_PD_RGA>; + }; + + vepu_mmu: iommu@fdee0800 { + compatible = "rockchip,rk3568-iommu"; + reg = <0x0 0xfdee0800 0x0 0x40>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_JENC>, <&cru HCLK_JENC>; + clock-names = "aclk", "iface"; + power-domains = <&power RK3568_PD_RGA>; + #iommu-cells = <0>; + }; + sdmmc2: mmc@fe000000 { compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xfe000000 0x0 0x4000>; @@ -699,6 +739,62 @@ status = "disabled"; }; + dsi0: dsi@fe060000 { + compatible = "rockchip,rk3568-mipi-dsi", "snps,dw-mipi-dsi"; + reg = <0x00 0xfe060000 0x00 0x10000>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "pclk", "hclk"; + clocks = <&cru PCLK_DSITX_0>, <&cru HCLK_VO>; + phy-names = "dphy"; + phys = <&dsi_dphy0>; + power-domains = <&power RK3568_PD_VO>; + reset-names = "apb"; + resets = <&cru SRST_P_DSITX_0>; + rockchip,grf = <&grf>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + dsi0_in: port@0 { + reg = <0>; + }; + + dsi0_out: port@1 { + reg = <1>; + }; + }; + }; + + dsi1: dsi@fe070000 { + compatible = "rockchip,rk3568-mipi-dsi", "snps,dw-mipi-dsi"; + reg = <0x0 0xfe070000 0x0 0x10000>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "pclk", "hclk"; + clocks = <&cru PCLK_DSITX_1>, <&cru HCLK_VO>; + phy-names = "dphy"; + phys = <&dsi_dphy1>; + power-domains = <&power RK3568_PD_VO>; + reset-names = "apb"; + resets = <&cru SRST_P_DSITX_1>; + rockchip,grf = <&grf>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + dsi1_in: port@0 { + reg = <0>; + }; + + dsi1_out: port@1 { + reg = <1>; + }; + }; + }; + hdmi: hdmi@fe0a0000 { compatible = "rockchip,rk3568-dw-hdmi"; reg = <0x0 0xfe0a0000 0x0 0x20000>; @@ -1594,6 +1690,42 @@ status = "disabled"; }; + csi_dphy: phy@fe870000 { + compatible = "rockchip,rk3568-csi-dphy"; + reg = <0x0 0xfe870000 0x0 0x10000>; + clocks = <&cru PCLK_MIPICSIPHY>; + clock-names = "pclk"; + #phy-cells = <0>; + resets = <&cru SRST_P_MIPICSIPHY>; + reset-names = "apb"; + rockchip,grf = <&grf>; + status = "disabled"; + }; + + dsi_dphy0: mipi-dphy@fe850000 { + compatible = "rockchip,rk3568-dsi-dphy"; + reg = <0x0 0xfe850000 0x0 0x10000>; + clock-names = "ref", "pclk"; + clocks = <&pmucru CLK_MIPIDSIPHY0_REF>, <&cru PCLK_MIPIDSIPHY0>; + #phy-cells = <0>; + power-domains = <&power RK3568_PD_VO>; + reset-names = "apb"; + resets = <&cru SRST_P_MIPIDSIPHY0>; + status = "disabled"; + }; + + dsi_dphy1: mipi-dphy@fe860000 { + compatible = "rockchip,rk3568-dsi-dphy"; + reg = <0x0 0xfe860000 0x0 0x10000>; + clock-names = "ref", "pclk"; + clocks = <&pmucru CLK_MIPIDSIPHY1_REF>, <&cru PCLK_MIPIDSIPHY1>; + #phy-cells = <0>; + power-domains = <&power RK3568_PD_VO>; + reset-names = "apb"; + resets = <&cru SRST_P_MIPIDSIPHY1>; + status = "disabled"; + }; + usb2phy0: usb2phy@fe8a0000 { compatible = "rockchip,rk3568-usb2phy"; reg = <0x0 0xfe8a0000 0x0 0x10000>; diff --git a/arch/arm64/boot/dts/socionext/Makefile b/arch/arm64/boot/dts/socionext/Makefile index dda3da33614b..33989a9643ac 100644 --- a/arch/arm64/boot/dts/socionext/Makefile +++ b/arch/arm64/boot/dts/socionext/Makefile @@ -5,4 +5,6 @@ dtb-$(CONFIG_ARCH_UNIPHIER) += \ uniphier-ld20-akebi96.dtb \ uniphier-ld20-global.dtb \ uniphier-ld20-ref.dtb \ - uniphier-pxs3-ref.dtb + uniphier-pxs3-ref.dtb \ + uniphier-pxs3-ref-gadget0.dtb \ + uniphier-pxs3-ref-gadget1.dtb diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts index 617d2b1e9b1e..414aeb99e68f 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts @@ -39,11 +39,11 @@ }; ðsc { - interrupts = <0 8>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; }; &serialsc { - interrupts = <0 8>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; }; &serial0 { @@ -51,7 +51,7 @@ }; &gpio { - xirq0 { + xirq0-hog { gpio-hog; gpios = <UNIPHIER_GPIO_IRQ(0) 0>; input; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi index 15dcfc259854..1c76b4375b2e 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi @@ -7,6 +7,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/gpio/uniphier-gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> / { compatible = "socionext,uniphier-ld11"; @@ -35,6 +36,7 @@ reg = <0 0x000>; clocks = <&sys_clk 33>; enable-method = "psci"; + next-level-cache = <&l2>; operating-points-v2 = <&cluster0_opp>; }; @@ -44,8 +46,13 @@ reg = <0 0x001>; clocks = <&sys_clk 33>; enable-method = "psci"; + next-level-cache = <&l2>; operating-points-v2 = <&cluster0_opp>; }; + + l2: l2-cache { + compatible = "cache"; + }; }; cluster0_opp: opp-table { @@ -102,10 +109,10 @@ timer { compatible = "arm,armv8-timer"; - interrupts = <1 13 4>, - <1 14 4>, - <1 11 4>, - <1 10 4>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; }; reserved-memory { @@ -131,7 +138,7 @@ reg = <0x54006000 0x100>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 39 4>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; clocks = <&peri_clk 11>; @@ -144,7 +151,7 @@ reg = <0x54006100 0x100>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 216 4>; + interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; clocks = <&peri_clk 12>; @@ -155,7 +162,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006800 0x40>; - interrupts = <0 33 4>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; clocks = <&peri_clk 0>; @@ -166,7 +173,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006900 0x40>; - interrupts = <0 35 4>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; clocks = <&peri_clk 1>; @@ -177,7 +184,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006a00 0x40>; - interrupts = <0 37 4>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; clocks = <&peri_clk 2>; @@ -188,7 +195,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006b00 0x40>; - interrupts = <0 177 4>; + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; clocks = <&peri_clk 3>; @@ -223,7 +230,7 @@ audio@56000000 { compatible = "socionext,uniphier-ld11-aio"; reg = <0x56000000 0x80000>; - interrupts = <0 144 4>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_aout1>, <&pinctrl_aoutiec1>; @@ -323,7 +330,7 @@ reg = <0x58780000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 41 4>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; clocks = <&peri_clk 4>; @@ -337,7 +344,7 @@ reg = <0x58781000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 42 4>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; clocks = <&peri_clk 5>; @@ -350,7 +357,7 @@ reg = <0x58782000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 43 4>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; clocks = <&peri_clk 6>; resets = <&peri_rst 6>; clock-frequency = <400000>; @@ -362,7 +369,7 @@ reg = <0x58783000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 44 4>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; clocks = <&peri_clk 7>; @@ -376,7 +383,7 @@ reg = <0x58784000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 45 4>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c4>; clocks = <&peri_clk 8>; @@ -389,7 +396,7 @@ reg = <0x58785000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 25 4>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; clocks = <&peri_clk 9>; resets = <&peri_rst 9>; clock-frequency = <400000>; @@ -440,7 +447,7 @@ emmc: mmc@5a000000 { compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc"; reg = <0x5a000000 0x400>; - interrupts = <0 78 4>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_emmc>; clocks = <&sys_clk 4>; @@ -460,7 +467,7 @@ compatible = "socionext,uniphier-ehci", "generic-ehci"; status = "disabled"; reg = <0x5a800100 0x100>; - interrupts = <0 243 4>; + interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0>; clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 8>, @@ -476,7 +483,7 @@ compatible = "socionext,uniphier-ehci", "generic-ehci"; status = "disabled"; reg = <0x5a810100 0x100>; - interrupts = <0 244 4>; + interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb1>; clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 9>, @@ -492,7 +499,7 @@ compatible = "socionext,uniphier-ehci", "generic-ehci"; status = "disabled"; reg = <0x5a820100 0x100>; - interrupts = <0 245 4>; + interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb2>; clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 10>, @@ -530,7 +537,7 @@ compatible = "socionext,uniphier-ld11-pinctrl"; }; - usb-phy { + usb-controller { compatible = "socionext,uniphier-ld11-usb2-phy"; #address-cells = <1>; #size-cells = <0>; @@ -573,7 +580,7 @@ xdmac: dma-controller@5fc10000 { compatible = "socionext,uniphier-xdmac"; reg = <0x5fc10000 0x5300>; - interrupts = <0 188 4>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; dma-channels = <16>; #dma-cells = <2>; }; @@ -591,7 +598,7 @@ <0x5fe40000 0x80000>; /* GICR */ interrupt-controller; #interrupt-cells = <3>; - interrupts = <1 9 4>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; }; sysctrl@61840000 { @@ -618,7 +625,7 @@ compatible = "socionext,uniphier-ld11-ave4"; status = "disabled"; reg = <0x65000000 0x8500>; - interrupts = <0 66 4>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; clock-names = "ether"; clocks = <&sys_clk 6>; reset-names = "ether"; @@ -640,7 +647,7 @@ reg = <0x68000000 0x20>, <0x68100000 0x1000>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 65 4>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; clock-names = "nand", "nand_x", "ecc"; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-akebi96.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-akebi96.dts index aa159a11292c..fba454adae7d 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20-akebi96.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-akebi96.dts @@ -110,7 +110,7 @@ spi-max-frequency = <12500000>; interrupt-parent = <&gpio>; interrupt-names = "udc"; - interrupts = <0 2>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; }; }; @@ -168,12 +168,12 @@ &gpio { /* IRQs for Max3421 */ - xirq0 { + xirq0-hog { gpio-hog; gpios = <UNIPHIER_GPIO_IRQ(0) 1>; input; }; - xirq10 { + xirq10-hog { gpio-hog; gpios = <UNIPHIER_GPIO_IRQ(10) 1>; input; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts index 39ee279a1eb9..a5f2083f8b75 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts @@ -39,11 +39,11 @@ }; ðsc { - interrupts = <0 8>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; }; &serialsc { - interrupts = <0 8>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; }; &serial0 { @@ -51,7 +51,7 @@ }; &gpio { - xirq0 { + xirq0-hog { gpio-hog; gpios = <UNIPHIER_GPIO_IRQ(0) 0>; input; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi index 8f2c1c1e2c64..9308458f9611 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi @@ -7,6 +7,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/gpio/uniphier-gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/thermal/thermal.h> / { @@ -45,6 +46,7 @@ reg = <0 0x000>; clocks = <&sys_clk 32>; enable-method = "psci"; + next-level-cache = <&a72_l2>; operating-points-v2 = <&cluster0_opp>; #cooling-cells = <2>; }; @@ -55,6 +57,7 @@ reg = <0 0x001>; clocks = <&sys_clk 32>; enable-method = "psci"; + next-level-cache = <&a72_l2>; operating-points-v2 = <&cluster0_opp>; #cooling-cells = <2>; }; @@ -65,6 +68,7 @@ reg = <0 0x100>; clocks = <&sys_clk 33>; enable-method = "psci"; + next-level-cache = <&a53_l2>; operating-points-v2 = <&cluster1_opp>; #cooling-cells = <2>; }; @@ -75,12 +79,21 @@ reg = <0 0x101>; clocks = <&sys_clk 33>; enable-method = "psci"; + next-level-cache = <&a53_l2>; operating-points-v2 = <&cluster1_opp>; #cooling-cells = <2>; }; + + a72_l2: l2-cache0 { + compatible = "cache"; + }; + + a53_l2: l2-cache1 { + compatible = "cache"; + }; }; - cluster0_opp: opp-table0 { + cluster0_opp: opp-table-0 { compatible = "operating-points-v2"; opp-shared; @@ -118,7 +131,7 @@ }; }; - cluster1_opp: opp-table1 { + cluster1_opp: opp-table-1 { compatible = "operating-points-v2"; opp-shared; @@ -176,10 +189,10 @@ timer { compatible = "arm,armv8-timer"; - interrupts = <1 13 4>, - <1 14 4>, - <1 11 4>, - <1 10 4>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; }; thermal-zones { @@ -236,7 +249,7 @@ reg = <0x54006000 0x100>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 39 4>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; clocks = <&peri_clk 11>; @@ -249,7 +262,7 @@ reg = <0x54006100 0x100>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 216 4>; + interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; clocks = <&peri_clk 12>; @@ -262,7 +275,7 @@ reg = <0x54006200 0x100>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 229 4>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi2>; clocks = <&peri_clk 13>; @@ -275,7 +288,7 @@ reg = <0x54006300 0x100>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 230 4>; + interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi3>; clocks = <&peri_clk 14>; @@ -286,7 +299,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006800 0x40>; - interrupts = <0 33 4>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; clocks = <&peri_clk 0>; @@ -297,7 +310,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006900 0x40>; - interrupts = <0 35 4>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; clocks = <&peri_clk 1>; @@ -308,7 +321,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006a00 0x40>; - interrupts = <0 37 4>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; clocks = <&peri_clk 2>; @@ -319,7 +332,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006b00 0x40>; - interrupts = <0 177 4>; + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; clocks = <&peri_clk 3>; @@ -348,7 +361,7 @@ audio@56000000 { compatible = "socionext,uniphier-ld20-aio"; reg = <0x56000000 0x80000>; - interrupts = <0 144 4>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_aout1>, <&pinctrl_aoutiec1>; @@ -448,7 +461,7 @@ reg = <0x58780000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 41 4>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; clocks = <&peri_clk 4>; @@ -462,7 +475,7 @@ reg = <0x58781000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 42 4>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; clocks = <&peri_clk 5>; @@ -475,7 +488,7 @@ reg = <0x58782000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 43 4>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; clocks = <&peri_clk 6>; resets = <&peri_rst 6>; clock-frequency = <400000>; @@ -487,7 +500,7 @@ reg = <0x58783000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 44 4>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; clocks = <&peri_clk 7>; @@ -501,7 +514,7 @@ reg = <0x58784000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 45 4>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c4>; clocks = <&peri_clk 8>; @@ -514,7 +527,7 @@ reg = <0x58785000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 25 4>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; clocks = <&peri_clk 9>; resets = <&peri_rst 9>; clock-frequency = <400000>; @@ -570,7 +583,7 @@ emmc: mmc@5a000000 { compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc"; reg = <0x5a000000 0x400>; - interrupts = <0 78 4>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_emmc>; clocks = <&sys_clk 4>; @@ -590,7 +603,7 @@ compatible = "socionext,uniphier-sd-v3.1.1"; status = "disabled"; reg = <0x5a400000 0x800>; - interrupts = <0 76 4>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sd>; clocks = <&sd_clk 0>; @@ -675,7 +688,7 @@ xdmac: dma-controller@5fc10000 { compatible = "socionext,uniphier-xdmac"; reg = <0x5fc10000 0x5300>; - interrupts = <0 188 4>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; dma-channels = <16>; #dma-cells = <2>; }; @@ -693,7 +706,7 @@ <0x5fe80000 0x80000>; /* GICR */ interrupt-controller; #interrupt-cells = <3>; - interrupts = <1 9 4>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; }; sysctrl@61840000 { @@ -715,9 +728,9 @@ compatible = "socionext,uniphier-wdt"; }; - pvtctl: pvtctl { + pvtctl: thermal-sensor { compatible = "socionext,uniphier-ld20-thermal"; - interrupts = <0 3 4>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; #thermal-sensor-cells = <0>; socionext,tmod-calibration = <0x0f22 0x68ee>; }; @@ -727,7 +740,7 @@ compatible = "socionext,uniphier-ld20-ave4"; status = "disabled"; reg = <0x65000000 0x8500>; - interrupts = <0 66 4>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ether_rgmii>; clock-names = "ether"; @@ -749,7 +762,7 @@ status = "disabled"; reg = <0x65a00000 0xcd00>; interrupt-names = "host"; - interrupts = <0 134 4>; + interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb1>, <&pinctrl_usb2>, <&pinctrl_usb3>; @@ -762,7 +775,7 @@ dr_mode = "host"; }; - usb-glue@65b00000 { + usb-controller@65b00000 { compatible = "socionext,uniphier-ld20-dwc3-glue", "simple-mfd"; #address-cells = <1>; @@ -895,7 +908,7 @@ }; pcie: pcie@66000000 { - compatible = "socionext,uniphier-pcie", "snps,dw-pcie"; + compatible = "socionext,uniphier-pcie"; status = "disabled"; reg-names = "dbi", "link", "config"; reg = <0x66000000 0x1000>, <0x66010000 0x10000>, @@ -915,7 +928,8 @@ <0x82000000 0 0x20000000 0x20000000 0 0x0ffe0000>; #interrupt-cells = <1>; interrupt-names = "dma", "msi"; - interrupts = <0 224 4>, <0 225 4>; + interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0 0 0 1 &pcie_intc 0>, /* INTA */ <0 0 0 2 &pcie_intc 1>, /* INTB */ @@ -928,7 +942,7 @@ interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&gic>; - interrupts = <0 226 4>; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; }; }; @@ -950,7 +964,7 @@ reg = <0x68000000 0x20>, <0x68100000 0x1000>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 65 4>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; clock-names = "nand", "nand_x", "ecc"; diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget0.dts b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget0.dts new file mode 100644 index 000000000000..7069f51bc120 --- /dev/null +++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget0.dts @@ -0,0 +1,41 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +// +// Device Tree Source for UniPhier PXs3 Reference Board (for USB-Device #0) +// +// Copyright (C) 2021 Socionext Inc. +// Author: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> + +/dts-v1/; +#include "uniphier-pxs3-ref.dts" + +/ { + model = "UniPhier PXs3 Reference Board (USB-Device #0)"; +}; + +/* I2C3 pinctrl is shared with USB*VBUSIN */ +&i2c3 { + status = "disabled"; +}; + +&usb0 { + status = "okay"; + dr_mode = "peripheral"; + pinctrl-0 = <&pinctrl_usb0_device>; + snps,dis_enblslpm_quirk; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + snps,usb2_gadget_lpm_disable; + phy-names = "usb2-phy", "usb3-phy"; + phys = <&usb0_hsphy0>, <&usb0_ssphy0>; +}; + +&usb0_hsphy0 { + /delete-property/ vbus-supply; +}; + +&usb0_ssphy0 { + /delete-property/ vbus-supply; +}; + +/delete-node/ &usb0_hsphy1; +/delete-node/ &usb0_ssphy1; diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget1.dts b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget1.dts new file mode 100644 index 000000000000..a3cfa8113ffb --- /dev/null +++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget1.dts @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +// +// Device Tree Source for UniPhier PXs3 Reference Board (for USB-Device #1) +// +// Copyright (C) 2021 Socionext Inc. +// Author: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> + +/dts-v1/; +#include "uniphier-pxs3-ref.dts" + +/ { + model = "UniPhier PXs3 Reference Board (USB-Device #1)"; +}; + +/* I2C3 pinctrl is shared with USB*VBUSIN */ +&i2c3 { + status = "disabled"; +}; + +&usb1 { + status = "okay"; + dr_mode = "peripheral"; + pinctrl-0 = <&pinctrl_usb1_device>; + snps,dis_enblslpm_quirk; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + snps,usb2_gadget_lpm_disable; + phy-names = "usb2-phy", "usb3-phy"; + phys = <&usb1_hsphy0>, <&usb1_ssphy0>; +}; + +&usb1_hsphy0 { + /delete-property/ vbus-supply; +}; + +&usb1_ssphy0 { + /delete-property/ vbus-supply; +}; + +/delete-node/ &usb1_hsphy1; diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts index 086040306fb3..1ced6190ab2b 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts @@ -40,11 +40,11 @@ }; ðsc { - interrupts = <4 8>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; }; &serialsc { - interrupts = <4 8>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; }; &spi0 { @@ -68,7 +68,7 @@ }; &gpio { - xirq4 { + xirq4-hog { gpio-hog; gpios = <UNIPHIER_GPIO_IRQ(4) 0>; input; @@ -137,6 +137,14 @@ }; }; +&ahci0 { + status = "okay"; +}; + +&ahci1 { + status = "okay"; +}; + &pinctrl_ether_rgmii { tx { pins = "RGMII0_TXCLK", "RGMII0_TXD0", "RGMII0_TXD1", diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi index ba75adedbf79..b0c29510a7da 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi @@ -7,6 +7,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/gpio/uniphier-gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/thermal/thermal.h> / { @@ -42,6 +43,7 @@ reg = <0 0x000>; clocks = <&sys_clk 33>; enable-method = "psci"; + next-level-cache = <&l2>; operating-points-v2 = <&cluster0_opp>; #cooling-cells = <2>; }; @@ -52,6 +54,7 @@ reg = <0 0x001>; clocks = <&sys_clk 33>; enable-method = "psci"; + next-level-cache = <&l2>; operating-points-v2 = <&cluster0_opp>; #cooling-cells = <2>; }; @@ -62,6 +65,7 @@ reg = <0 0x002>; clocks = <&sys_clk 33>; enable-method = "psci"; + next-level-cache = <&l2>; operating-points-v2 = <&cluster0_opp>; #cooling-cells = <2>; }; @@ -72,9 +76,14 @@ reg = <0 0x003>; clocks = <&sys_clk 33>; enable-method = "psci"; + next-level-cache = <&l2>; operating-points-v2 = <&cluster0_opp>; #cooling-cells = <2>; }; + + l2: l2-cache { + compatible = "cache"; + }; }; cluster0_opp: opp-table { @@ -135,10 +144,10 @@ timer { compatible = "arm,armv8-timer"; - interrupts = <1 13 4>, - <1 14 4>, - <1 11 4>, - <1 10 4>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; }; thermal-zones { @@ -195,7 +204,7 @@ reg = <0x54006000 0x100>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 39 4>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; clocks = <&peri_clk 11>; @@ -208,7 +217,7 @@ reg = <0x54006100 0x100>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 216 4>; + interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; clocks = <&peri_clk 12>; @@ -219,7 +228,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006800 0x40>; - interrupts = <0 33 4>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; clocks = <&peri_clk 0>; @@ -230,7 +239,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006900 0x40>; - interrupts = <0 35 4>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; clocks = <&peri_clk 1>; @@ -241,7 +250,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006a00 0x40>; - interrupts = <0 37 4>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; clocks = <&peri_clk 2>; @@ -252,7 +261,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006b00 0x40>; - interrupts = <0 177 4>; + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; clocks = <&peri_clk 3>; @@ -284,7 +293,7 @@ reg = <0x58780000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 41 4>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; clocks = <&peri_clk 4>; @@ -298,7 +307,7 @@ reg = <0x58781000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 42 4>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; clocks = <&peri_clk 5>; @@ -312,7 +321,7 @@ reg = <0x58782000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 43 4>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; clocks = <&peri_clk 6>; @@ -326,7 +335,7 @@ reg = <0x58783000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 44 4>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; clocks = <&peri_clk 7>; @@ -340,7 +349,7 @@ reg = <0x58786000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 26 4>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; clocks = <&peri_clk 10>; resets = <&peri_rst 10>; clock-frequency = <400000>; @@ -396,7 +405,7 @@ emmc: mmc@5a000000 { compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc"; reg = <0x5a000000 0x400>; - interrupts = <0 78 4>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_emmc>; clocks = <&sys_clk 4>; @@ -416,7 +425,7 @@ compatible = "socionext,uniphier-sd-v3.1.1"; status = "disabled"; reg = <0x5a400000 0x800>; - interrupts = <0 76 4>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default", "uhs"; pinctrl-0 = <&pinctrl_sd>; pinctrl-1 = <&pinctrl_sd_uhs>; @@ -505,7 +514,7 @@ xdmac: dma-controller@5fc10000 { compatible = "socionext,uniphier-xdmac"; reg = <0x5fc10000 0x5300>; - interrupts = <0 188 4>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; dma-channels = <16>; #dma-cells = <2>; }; @@ -523,7 +532,7 @@ <0x5fe80000 0x80000>; /* GICR */ interrupt-controller; #interrupt-cells = <3>; - interrupts = <1 9 4>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; }; sysctrl@61840000 { @@ -545,9 +554,9 @@ compatible = "socionext,uniphier-wdt"; }; - pvtctl: pvtctl { + pvtctl: thermal-sensor { compatible = "socionext,uniphier-pxs3-thermal"; - interrupts = <0 3 4>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; #thermal-sensor-cells = <0>; socionext,tmod-calibration = <0x0f22 0x68ee>; }; @@ -557,7 +566,7 @@ compatible = "socionext,uniphier-pxs3-ave4"; status = "disabled"; reg = <0x65000000 0x8500>; - interrupts = <0 66 4>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ether_rgmii>; clock-names = "ether"; @@ -578,7 +587,7 @@ compatible = "socionext,uniphier-pxs3-ave4"; status = "disabled"; reg = <0x65200000 0x8500>; - interrupts = <0 67 4>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ether1_rgmii>; clock-names = "ether"; @@ -595,12 +604,92 @@ }; }; + ahci0: sata@65600000 { + compatible = "socionext,uniphier-pxs3-ahci", + "generic-ahci"; + status = "disabled"; + reg = <0x65600000 0x10000>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sys_clk 28>; + resets = <&sys_rst 28>, <&ahci0_rst 0>; + ports-implemented = <1>; + phys = <&ahci0_phy>; + }; + + sata-controller@65700000 { + compatible = "socionext,uniphier-pxs3-ahci-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65700000 0x100>; + + ahci0_rst: reset-controller@0 { + compatible = "socionext,uniphier-pxs3-ahci-reset"; + reg = <0x0 0x4>; + clock-names = "link"; + clocks = <&sys_clk 28>; + reset-names = "link"; + resets = <&sys_rst 28>; + #reset-cells = <1>; + }; + + ahci0_phy: sata-phy@10 { + compatible = "socionext,uniphier-pxs3-ahci-phy"; + reg = <0x10 0x10>; + clock-names = "link", "phy"; + clocks = <&sys_clk 28>, <&sys_clk 30>; + reset-names = "link", "phy"; + resets = <&sys_rst 28>, <&sys_rst 30>; + #phy-cells = <0>; + }; + }; + + ahci1: sata@65800000 { + compatible = "socionext,uniphier-pxs3-ahci", + "generic-ahci"; + status = "disabled"; + reg = <0x65800000 0x10000>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sys_clk 29>; + resets = <&sys_rst 29>, <&ahci1_rst 0>; + ports-implemented = <1>; + phys = <&ahci1_phy>; + }; + + sata-controller@65900000 { + compatible = "socionext,uniphier-pxs3-ahci-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65900000 0x100>; + + ahci1_rst: reset-controller@0 { + compatible = "socionext,uniphier-pxs3-ahci-reset"; + reg = <0x0 0x4>; + clock-names = "link"; + clocks = <&sys_clk 29>; + reset-names = "link"; + resets = <&sys_rst 29>; + #reset-cells = <1>; + }; + + ahci1_phy: sata-phy@10 { + compatible = "socionext,uniphier-pxs3-ahci-phy"; + reg = <0x10 0x10>; + clock-names = "link", "phy"; + clocks = <&sys_clk 29>, <&sys_clk 30>; + reset-names = "link", "phy"; + resets = <&sys_rst 29>, <&sys_rst 30>; + #phy-cells = <0>; + }; + }; + usb0: usb@65a00000 { compatible = "socionext,uniphier-dwc3", "snps,dwc3"; status = "disabled"; reg = <0x65a00000 0xcd00>; interrupt-names = "dwc_usb3"; - interrupts = <0 134 4>; + interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>; clock-names = "ref", "bus_early", "suspend"; @@ -611,7 +700,7 @@ dr_mode = "host"; }; - usb-glue@65b00000 { + usb-controller@65b00000 { compatible = "socionext,uniphier-pxs3-dwc3-glue", "simple-mfd"; #address-cells = <1>; @@ -702,7 +791,7 @@ status = "disabled"; reg = <0x65c00000 0xcd00>; interrupt-names = "dwc_usb3"; - interrupts = <0 137 4>; + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>; clock-names = "ref", "bus_early", "suspend"; @@ -713,7 +802,7 @@ dr_mode = "host"; }; - usb-glue@65d00000 { + usb-controller@65d00000 { compatible = "socionext,uniphier-pxs3-dwc3-glue", "simple-mfd"; #address-cells = <1>; @@ -792,7 +881,7 @@ }; pcie: pcie@66000000 { - compatible = "socionext,uniphier-pcie", "snps,dw-pcie"; + compatible = "socionext,uniphier-pcie"; status = "disabled"; reg-names = "dbi", "link", "config"; reg = <0x66000000 0x1000>, <0x66010000 0x10000>, @@ -812,7 +901,8 @@ <0x82000000 0 0x20000000 0x20000000 0 0x0ffe0000>; #interrupt-cells = <1>; interrupt-names = "dma", "msi"; - interrupts = <0 224 4>, <0 225 4>; + interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0 0 0 1 &pcie_intc 0>, /* INTA */ <0 0 0 2 &pcie_intc 1>, /* INTB */ @@ -825,7 +915,7 @@ interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&gic>; - interrupts = <0 226 4>; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; }; }; @@ -847,7 +937,7 @@ reg = <0x68000000 0x20>, <0x68100000 0x1000>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 65 4>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; clock-names = "nand", "nand_x", "ecc"; diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile index 02e5d80344d0..4555a5be2257 100644 --- a/arch/arm64/boot/dts/ti/Makefile +++ b/arch/arm64/boot/dts/ti/Makefile @@ -23,3 +23,5 @@ dtb-$(CONFIG_ARCH_K3) += k3-am642-evm.dtb dtb-$(CONFIG_ARCH_K3) += k3-am642-sk.dtb dtb-$(CONFIG_ARCH_K3) += k3-am625-sk.dtb + +dtb-$(CONFIG_ARCH_K3) += k3-am62a7-sk.dtb diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi index 12ab7548dc77..03660476364f 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi @@ -54,6 +54,12 @@ reg = <0x4044 0x8>; #phy-cells = <1>; }; + + epwm_tbclk: clock@4130 { + compatible = "ti,am62-epwm-tbclk", "syscon"; + reg = <0x4130 0x4>; + #clock-cells = <1>; + }; }; dmss: bus@48000000 { @@ -584,4 +590,31 @@ interrupt-names = "int0", "int1"; bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; }; + + epwm0: pwm@23000000 { + compatible = "ti,am64-epwm", "ti,am3352-ehrpwm"; + #pwm-cells = <3>; + reg = <0x00 0x23000000 0x00 0x100>; + power-domains = <&k3_pds 86 TI_SCI_PD_EXCLUSIVE>; + clocks = <&epwm_tbclk 0>, <&k3_clks 86 0>; + clock-names = "tbclk", "fck"; + }; + + epwm1: pwm@23010000 { + compatible = "ti,am64-epwm", "ti,am3352-ehrpwm"; + #pwm-cells = <3>; + reg = <0x00 0x23010000 0x00 0x100>; + power-domains = <&k3_pds 87 TI_SCI_PD_EXCLUSIVE>; + clocks = <&epwm_tbclk 1>, <&k3_clks 87 0>; + clock-names = "tbclk", "fck"; + }; + + epwm2: pwm@23020000 { + compatible = "ti,am64-epwm", "ti,am3352-ehrpwm"; + #pwm-cells = <3>; + reg = <0x00 0x23020000 0x00 0x100>; + power-domains = <&k3_pds 88 TI_SCI_PD_EXCLUSIVE>; + clocks = <&epwm_tbclk 2>, <&k3_clks 88 0>; + clock-names = "tbclk", "fck"; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk.dts b/arch/arm64/boot/dts/ti/k3-am625-sk.dts index 9b4dbae9d4aa..93a5f0817efc 100644 --- a/arch/arm64/boot/dts/ti/k3-am625-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am625-sk.dts @@ -502,3 +502,15 @@ &main_mcan0 { status = "disabled"; }; + +&epwm0 { + status = "disabled"; +}; + +&epwm1 { + status = "disabled"; +}; + +&epwm2 { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi new file mode 100644 index 000000000000..bc4b50bcd177 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi @@ -0,0 +1,298 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for AM62A SoC Family Main Domain peripherals + * + * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +&cbass_main { + oc_sram: sram@70000000 { + compatible = "mmio-sram"; + reg = <0x00 0x70000000 0x00 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x00 0x70000000 0x10000>; + }; + + gic500: interrupt-controller@1800000 { + compatible = "arm,gic-v3"; + reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */ + <0x00 0x01880000 0x00 0xc0000>, /* GICR */ + <0x00 0x01880000 0x00 0xc0000>, /* GICR */ + <0x01 0x00000000 0x00 0x2000>, /* GICC */ + <0x01 0x00010000 0x00 0x1000>, /* GICH */ + <0x01 0x00020000 0x00 0x2000>; /* GICV */ + #address-cells = <2>; + #size-cells = <2>; + ranges; + #interrupt-cells = <3>; + interrupt-controller; + /* + * vcpumntirq: + * virtual CPU interface maintenance interrupt + */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + + gic_its: msi-controller@1820000 { + compatible = "arm,gic-v3-its"; + reg = <0x00 0x01820000 0x00 0x10000>; + socionext,synquacer-pre-its = <0x1000000 0x400000>; + msi-controller; + #msi-cells = <1>; + }; + }; + + main_conf: syscon@100000 { + compatible = "ti,j721e-system-controller", "syscon", "simple-mfd"; + reg = <0x00 0x00100000 0x00 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00 0x00 0x00100000 0x20000>; + }; + + dmss: bus@48000000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + dma-ranges; + ranges = <0x00 0x48000000 0x00 0x48000000 0x00 0x06000000>; + + ti,sci-dev-id = <25>; + + secure_proxy_main: mailbox@4d000000 { + compatible = "ti,am654-secure-proxy"; + reg = <0x00 0x4d000000 0x00 0x80000>, + <0x00 0x4a600000 0x00 0x80000>, + <0x00 0x4a400000 0x00 0x80000>; + reg-names = "target_data", "rt", "scfg"; + #mbox-cells = <1>; + interrupt-names = "rx_012"; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + dmsc: system-controller@44043000 { + compatible = "ti,k2g-sci"; + reg = <0x00 0x44043000 0x00 0xfe0>; + reg-names = "debug_messages"; + ti,host-id = <12>; + mbox-names = "rx", "tx"; + mboxes= <&secure_proxy_main 12>, + <&secure_proxy_main 13>; + + k3_pds: power-controller { + compatible = "ti,sci-pm-domain"; + #power-domain-cells = <2>; + }; + + k3_clks: clock-controller { + compatible = "ti,k2g-sci-clk"; + #clock-cells = <2>; + }; + + k3_reset: reset-controller { + compatible = "ti,sci-reset"; + #reset-cells = <2>; + }; + }; + + main_pmx0: pinctrl@f4000 { + compatible = "pinctrl-single"; + reg = <0x00 0xf4000 0x00 0x2ac>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; + + main_uart0: serial@2800000 { + compatible = "ti,am64-uart", "ti,am654-uart"; + reg = <0x00 0x02800000 0x00 0x100>; + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 146 0>; + clock-names = "fclk"; + status = "disabled"; + }; + + main_uart1: serial@2810000 { + compatible = "ti,am64-uart", "ti,am654-uart"; + reg = <0x00 0x02810000 0x00 0x100>; + interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 152 0>; + clock-names = "fclk"; + status = "disabled"; + }; + + main_uart2: serial@2820000 { + compatible = "ti,am64-uart", "ti,am654-uart"; + reg = <0x00 0x02820000 0x00 0x100>; + interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 153 0>; + clock-names = "fclk"; + status = "disabled"; + }; + + main_uart3: serial@2830000 { + compatible = "ti,am64-uart", "ti,am654-uart"; + reg = <0x00 0x02830000 0x00 0x100>; + interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 154 0>; + clock-names = "fclk"; + status = "disabled"; + }; + + main_uart4: serial@2840000 { + compatible = "ti,am64-uart", "ti,am654-uart"; + reg = <0x00 0x02840000 0x00 0x100>; + interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 155 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 155 0>; + clock-names = "fclk"; + status = "disabled"; + }; + + main_uart5: serial@2850000 { + compatible = "ti,am64-uart", "ti,am654-uart"; + reg = <0x00 0x02850000 0x00 0x100>; + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 156 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 156 0>; + clock-names = "fclk"; + status = "disabled"; + }; + + main_uart6: serial@2860000 { + compatible = "ti,am64-uart", "ti,am654-uart"; + reg = <0x00 0x02860000 0x00 0x100>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 158 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 158 0>; + clock-names = "fclk"; + status = "disabled"; + }; + + main_i2c0: i2c@20000000 { + compatible = "ti,am64-i2c", "ti,omap4-i2c"; + reg = <0x00 0x20000000 0x00 0x100>; + interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 102 2>; + clock-names = "fck"; + status = "disabled"; + }; + + main_i2c1: i2c@20010000 { + compatible = "ti,am64-i2c", "ti,omap4-i2c"; + reg = <0x00 0x20010000 0x00 0x100>; + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 103 2>; + clock-names = "fck"; + status = "disabled"; + }; + + main_i2c2: i2c@20020000 { + compatible = "ti,am64-i2c", "ti,omap4-i2c"; + reg = <0x00 0x20020000 0x00 0x100>; + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 104 2>; + clock-names = "fck"; + status = "disabled"; + }; + + main_i2c3: i2c@20030000 { + compatible = "ti,am64-i2c", "ti,omap4-i2c"; + reg = <0x00 0x20030000 0x00 0x100>; + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 105 2>; + clock-names = "fck"; + status = "disabled"; + }; + + main_gpio_intr: interrupt-controller@a00000 { + compatible = "ti,sci-intr"; + reg = <0x00 0x00a00000 0x00 0x800>; + ti,intr-trigger-type = <1>; + interrupt-controller; + interrupt-parent = <&gic500>; + #interrupt-cells = <1>; + ti,sci = <&dmsc>; + ti,sci-dev-id = <3>; + ti,interrupt-ranges = <0 32 16>; + status = "disabled"; + }; + + main_gpio0: gpio@600000 { + compatible = "ti,am64-gpio", "ti,keystone-gpio"; + reg = <0x00 0x00600000 0x0 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&main_gpio_intr>; + interrupts = <190>, <191>, <192>, + <193>, <194>, <195>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <87>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 77 0>; + clock-names = "gpio"; + status = "disabled"; + }; + + main_gpio1: gpio@601000 { + compatible = "ti,am64-gpio", "ti,keystone-gpio"; + reg = <0x00 0x00601000 0x0 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&main_gpio_intr>; + interrupts = <180>, <181>, <182>, + <183>, <184>, <185>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <88>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 78 0>; + clock-names = "gpio"; + status = "disabled"; + }; + + sdhci1: mmc@fa00000 { + compatible = "ti,am62-sdhci"; + reg = <0x00 0xfa00000 0x00 0x260>, <0x00 0xfa08000 0x00 0x134>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 58 5>, <&k3_clks 58 6>; + clock-names = "clk_ahb", "clk_xin"; + ti,trm-icp = <0x2>; + ti,otap-del-sel-legacy = <0x0>; + ti,otap-del-sel-sd-hs = <0x0>; + ti,otap-del-sel-sdr12 = <0xf>; + ti,otap-del-sel-sdr25 = <0xf>; + ti,otap-del-sel-sdr50 = <0xc>; + ti,otap-del-sel-sdr104 = <0x6>; + ti,otap-del-sel-ddr50 = <0x9>; + ti,itap-del-sel-legacy = <0x0>; + ti,itap-del-sel-sd-hs = <0x0>; + ti,itap-del-sel-sdr12 = <0x0>; + ti,itap-del-sel-sdr25 = <0x0>; + ti,clkbuf-sel = <0x7>; + bus-width = <4>; + no-1-8-v; + status = "disabled"; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi new file mode 100644 index 000000000000..6d1e501b94ab --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi @@ -0,0 +1,39 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for AM625 SoC Family MCU Domain peripherals + * + * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +&cbass_mcu { + mcu_pmx0: pinctrl@4084000 { + compatible = "pinctrl-single"; + reg = <0x00 0x04084000 0x00 0x88>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + status = "disabled"; + }; + + mcu_uart0: serial@4a00000 { + compatible = "ti,am64-uart", "ti,am654-uart"; + reg = <0x00 0x04a00000 0x00 0x100>; + interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 149 0>; + clock-names = "fclk"; + status = "disabled"; + }; + + mcu_i2c0: i2c@4900000 { + compatible = "ti,am64-i2c", "ti,omap4-i2c"; + reg = <0x00 0x04900000 0x00 0x100>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 106 2>; + clock-names = "fck"; + status = "disabled"; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi new file mode 100644 index 000000000000..99afac40e8d4 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi @@ -0,0 +1,54 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for AM62A SoC Family Wakeup Domain peripherals + * + * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +&cbass_wakeup { + wkup_conf: syscon@43000000 { + compatible = "ti,j721e-system-controller", "syscon", "simple-mfd"; + reg = <0x00 0x43000000 0x00 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00 0x00 0x43000000 0x20000>; + + chipid: chipid@14 { + compatible = "ti,am654-chipid"; + reg = <0x14 0x4>; + }; + }; + + wkup_uart0: serial@2b300000 { + compatible = "ti,am64-uart", "ti,am654-uart"; + reg = <0x00 0x2b300000 0x00 0x100>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 114 0>; + clock-names = "fclk"; + status = "disabled"; + }; + + wkup_i2c0: i2c@2b200000 { + compatible = "ti,am64-i2c", "ti,omap4-i2c"; + reg = <0x00 0x02b200000 0x00 0x100>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 107 4>; + clock-names = "fck"; + status = "disabled"; + }; + + wkup_rtc0: rtc@2b1f0000 { + compatible = "ti,am62-rtc"; + reg = <0x00 0x2b1f0000 0x00 0x100>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 117 6> , <&k3_clks 117 0>; + clock-names = "vbus", "osc32k"; + power-domains = <&k3_pds 117 TI_SCI_PD_EXCLUSIVE>; + wakeup-source; + status = "disabled"; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62a.dtsi b/arch/arm64/boot/dts/ti/k3-am62a.dtsi new file mode 100644 index 000000000000..6eb87c3f9f3c --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62a.dtsi @@ -0,0 +1,122 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for AM62A SoC Family + * + * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/pinctrl/k3.h> +#include <dt-bindings/soc/ti,sci_pm_domain.h> + +/ { + model = "Texas Instruments K3 AM62A SoC"; + compatible = "ti,am62a7"; + interrupt-parent = <&gic500>; + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + + psci: psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + }; + + a53_timer0: timer-cl0-cpu0 { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */ + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */ + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */ + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */ + }; + + pmu: pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + cbass_main: bus@f0000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + + ranges = <0x00 0x000f0000 0x00 0x000f0000 0x00 0x00030000>, /* Main MMRs */ + <0x00 0x00420000 0x00 0x00420000 0x00 0x00001000>, /* ESM0 */ + <0x00 0x00600000 0x00 0x00600000 0x00 0x00001100>, /* GPIO */ + <0x00 0x00703000 0x00 0x00703000 0x00 0x00000200>, /* USB0 debug trace */ + <0x00 0x0070c000 0x00 0x0070c000 0x00 0x00000200>, /* USB1 debug trace */ + <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* Timesync router */ + <0x00 0x01000000 0x00 0x01000000 0x00 0x01b28400>, /* First peripheral window */ + <0x00 0x08000000 0x00 0x08000000 0x00 0x00200000>, /* Main CPSW */ + <0x00 0x0e000000 0x00 0x0e000000 0x00 0x01d20000>, /* Second peripheral window */ + <0x00 0x0fd00000 0x00 0x0fd00000 0x00 0x00020000>, /* GPU */ + <0x00 0x20000000 0x00 0x20000000 0x00 0x0a008000>, /* Third peripheral window */ + <0x00 0x30040000 0x00 0x30040000 0x00 0x00080000>, /* PRUSS-M */ + <0x00 0x30101000 0x00 0x30101000 0x00 0x00010100>, /* CSI window */ + <0x00 0x30200000 0x00 0x30200000 0x00 0x00010000>, /* DSS */ + <0x00 0x30210000 0x00 0x30210000 0x00 0x00010000>, /* VPU */ + <0x00 0x31000000 0x00 0x31000000 0x00 0x00050000>, /* USB0 DWC3 Core window */ + <0x00 0x31100000 0x00 0x31100000 0x00 0x00050000>, /* USB1 DWC3 Core window */ + <0x00 0x40900000 0x00 0x40900000 0x00 0x00030000>, /* SA3UL */ + <0x00 0x43600000 0x00 0x43600000 0x00 0x00010000>, /* SA3 sproxy data */ + <0x00 0x44043000 0x00 0x44043000 0x00 0x00000fe0>, /* TI SCI DEBUG */ + <0x00 0x44860000 0x00 0x44860000 0x00 0x00040000>, /* SA3 sproxy config */ + <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>, /* DMSS */ + <0x00 0x60000000 0x00 0x60000000 0x00 0x08000000>, /* FSS0 DAT1 */ + <0x00 0x70000000 0x00 0x70000000 0x00 0x00010000>, /* OCSRAM */ + <0x00 0x7e000000 0x00 0x7e000000 0x00 0x00100000>, /* C7x_0 */ + <0x01 0x00000000 0x01 0x00000000 0x00 0x00310000>, /* A53 PERIPHBASE */ + <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS0 DAT3 */ + + /* MCU Domain Range */ + <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>, + <0x00 0x79000000 0x00 0x79000000 0x00 0x00008000>, /* MCU R5 ATCM */ + <0x00 0x79020000 0x00 0x79020000 0x00 0x00008000>, /* MCU R5 BTCM */ + <0x00 0x79100000 0x00 0x79100000 0x00 0x00040000>, /* MCU R5 IRAM0 */ + <0x00 0x79140000 0x00 0x79140000 0x00 0x00040000>, /* MCU R5 IRAM1 */ + + /* Wakeup Domain Range */ + <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>, + <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>, + <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>, + <0x00 0x78000000 0x00 0x78000000 0x00 0x00008000>, /* DM R5 ATCM */ + <0x00 0x78100000 0x00 0x78100000 0x00 0x00008000>; /* DM R5 BTCM */ + + cbass_mcu: bus@4000000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>, /* Peripheral window */ + <0x00 0x79000000 0x00 0x79000000 0x00 0x00008000>, /* MCU R5 ATCM */ + <0x00 0x79020000 0x00 0x79020000 0x00 0x00008000>, /* MCU R5 BTCM */ + <0x00 0x79100000 0x00 0x79100000 0x00 0x00040000>, /* MCU IRAM0 */ + <0x00 0x79140000 0x00 0x79140000 0x00 0x00040000>; /* MCU IRAM1 */ + }; + + cbass_wakeup: bus@b00000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>, /* VTM */ + <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>, /* Peripheral Window */ + <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>, /* WKUP CTRL MMR */ + <0x00 0x78000000 0x00 0x78000000 0x00 0x00008000>, /* DM R5 ATCM*/ + <0x00 0x78100000 0x00 0x78100000 0x00 0x00008000>; /* DM R5 BTCM*/ + }; + }; +}; + +/* Now include the peripherals for each bus segments */ +#include "k3-am62a-main.dtsi" +#include "k3-am62a-mcu.dtsi" +#include "k3-am62a-wakeup.dtsi" diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts new file mode 100644 index 000000000000..576dbce80ad8 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts @@ -0,0 +1,223 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * AM62A SK: https://www.ti.com/lit/zip/sprr459 + * + * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; + +#include <dt-bindings/leds/common.h> +#include <dt-bindings/gpio/gpio.h> +#include "k3-am62a7.dtsi" + +/ { + compatible = "ti,am62a7-sk", "ti,am62a7"; + model = "Texas Instruments AM62A7 SK"; + + aliases { + serial2 = &main_uart0; + mmc1 = &sdhci1; + }; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + memory@80000000 { + device_type = "memory"; + /* 2G RAM */ + reg = <0x00000000 0x80000000 0x00000000 0x80000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + secure_tfa_ddr: tfa@9e780000 { + reg = <0x00 0x9e780000 0x00 0x80000>; + alignment = <0x1000>; + no-map; + }; + + secure_ddr: optee@9e800000 { + reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */ + alignment = <0x1000>; + no-map; + }; + + wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 { + compatible = "shared-dma-pool"; + reg = <0x00 0x9c900000 0x00 0x01e00000>; + no-map; + }; + }; + + vmain_pd: regulator-0 { + /* TPS25750 PD CONTROLLER OUTPUT */ + compatible = "regulator-fixed"; + regulator-name = "vmain_pd"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_5v0: regulator-1 { + /* Output of TPS63070 */ + compatible = "regulator-fixed"; + regulator-name = "vcc_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vmain_pd>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_3v3_sys: regulator-2 { + /* output of LM5141-Q1 */ + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3_sys"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vmain_pd>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_mmc1: regulator-3 { + /* TPS22918DBVR */ + compatible = "regulator-fixed"; + regulator-name = "vdd_mmc1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + gpio = <&exp1 3 GPIO_ACTIVE_HIGH>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&usr_led_pins_default>; + + led-0 { + label = "am62a-sk:green:heartbeat"; + gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + function = LED_FUNCTION_HEARTBEAT; + default-state = "off"; + }; + }; +}; + +&main_pmx0 { + main_uart0_pins_default: main-uart0-pins-default { + pinctrl-single,pins = < + AM62AX_IOPAD(0x1c8, PIN_INPUT, 0) /* (D14) UART0_RXD */ + AM62AX_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */ + >; + }; + + main_i2c0_pins_default: main-i2c0-pins-default { + pinctrl-single,pins = < + AM62AX_IOPAD(0x1e0, PIN_INPUT_PULLUP, 0) /* (B16) I2C0_SCL */ + AM62AX_IOPAD(0x1e4, PIN_INPUT_PULLUP, 0) /* (A16) I2C0_SDA */ + >; + }; + + main_i2c1_pins_default: main-i2c1-pins-default { + pinctrl-single,pins = < + AM62AX_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */ + AM62AX_IOPAD(0x1ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */ + >; + }; + + main_i2c2_pins_default: main-i2c2-pins-default { + pinctrl-single,pins = < + AM62AX_IOPAD(0x0b0, PIN_INPUT_PULLUP, 1) /* (K22) GPMC0_CSn2.I2C2_SCL */ + AM62AX_IOPAD(0x0b4, PIN_INPUT_PULLUP, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */ + >; + }; + + main_mmc1_pins_default: main-mmc1-pins-default { + pinctrl-single,pins = < + AM62AX_IOPAD(0x23c, PIN_INPUT, 0) /* (A21) MMC1_CMD */ + AM62AX_IOPAD(0x234, PIN_INPUT, 0) /* (B22) MMC1_CLK */ + AM62AX_IOPAD(0x230, PIN_INPUT, 0) /* (A22) MMC1_DAT0 */ + AM62AX_IOPAD(0x22c, PIN_INPUT, 0) /* (B21) MMC1_DAT1 */ + AM62AX_IOPAD(0x228, PIN_INPUT, 0) /* (C21) MMC1_DAT2 */ + AM62AX_IOPAD(0x224, PIN_INPUT, 0) /* (D22) MMC1_DAT3 */ + AM62AX_IOPAD(0x240, PIN_INPUT, 0) /* (D17) MMC1_SDCD */ + >; + }; + + usr_led_pins_default: usr-led-pins-default { + pinctrl-single,pins = < + AM62AX_IOPAD(0x244, PIN_OUTPUT, 7) /* (D18) MMC1_SDWP.GPIO1_49 */ + >; + }; +}; + +&main_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c0_pins_default>; + clock-frequency = <400000>; +}; + +&main_i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c1_pins_default>; + clock-frequency = <400000>; + + exp1: gpio@22 { + compatible = "ti,tca6424"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST", + "BT_EN_SOC", "MMC1_SD_EN", + "VPP_EN", "EXP_PS_3V3_En", + "EXP_PS_5V0_En", "EXP_HAT_DETECT", + "GPIO_AUD_RSTn", "GPIO_eMMC_RSTn", + "UART1_FET_BUF_EN", "BT_UART_WAKE_SOC", + "GPIO_HDMI_RSTn", "CSI_GPIO0", + "CSI_GPIO1", "WLAN_ALERTn", + "HDMI_INTn", "TEST_GPIO2", + "MCASP1_FET_EN", "MCASP1_BUF_BT_EN", + "MCASP1_FET_SEL", "UART1_FET_SEL", + "PD_I2C_IRQ", "IO_EXP_TEST_LED"; + }; +}; + +&sdhci1 { + /* SD/MMC */ + status = "okay"; + vmmc-supply = <&vdd_mmc1>; + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc1_pins_default>; + ti,driver-strength-ohm = <50>; + disable-wp; +}; + +&main_gpio0 { + status = "okay"; +}; + +&main_gpio1 { + status = "okay"; +}; + +&main_gpio_intr { + status = "okay"; +}; + +&main_uart0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_uart0_pins_default>; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62a7.dtsi b/arch/arm64/boot/dts/ti/k3-am62a7.dtsi new file mode 100644 index 000000000000..331d89fda29d --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62a7.dtsi @@ -0,0 +1,103 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for AM62A7 SoC family in Quad core configuration + * + * TRM: https://www.ti.com/lit/zip/spruj16 + * + * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; + +#include "k3-am62a.dtsi" + +/ { + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0: cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + + core2 { + cpu = <&cpu2>; + }; + + core3 { + cpu = <&cpu3>; + }; + }; + }; + + cpu0: cpu@0 { + compatible = "arm,cortex-a53"; + reg = <0x000>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&L2_0>; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a53"; + reg = <0x001>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&L2_0>; + }; + + cpu2: cpu@2 { + compatible = "arm,cortex-a53"; + reg = <0x002>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&L2_0>; + }; + + cpu3: cpu@3 { + compatible = "arm,cortex-a53"; + reg = <0x003>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&L2_0>; + }; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + cache-level = <2>; + cache-size = <0x40000>; + cache-line-size = <64>; + cache-sets = <512>; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi index ada00575f0f2..d6aa23681bbe 100644 --- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi @@ -550,7 +550,7 @@ }; }; - cpts@39000000 { + main_cpts0: cpts@39000000 { compatible = "ti,j721e-cpts"; reg = <0x0 0x39000000 0x0 0x400>; reg-names = "cpts"; @@ -1308,4 +1308,52 @@ interrupt-names = "int0", "int1"; bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; }; + + crypto: crypto@40900000 { + compatible = "ti,am64-sa2ul"; + reg = <0x00 0x40900000 0x00 0x1200>; + power-domains = <&k3_pds 133 TI_SCI_PD_SHARED>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x40900000 0x00 0x40900000 0x00 0x30000>; + dmas = <&main_pktdma 0xc001 0>, <&main_pktdma 0x4002 0>, + <&main_pktdma 0x4003 0>; + dma-names = "tx", "rx1", "rx2"; + + rng: rng@40910000 { + compatible = "inside-secure,safexcel-eip76"; + reg = <0x00 0x40910000 0x00 0x7d>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 133 1>; + status = "disabled"; /* Used by OP-TEE */ + }; + }; + + gpmc0: memory-controller@3b000000 { + compatible = "ti,am64-gpmc"; + power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 80 0>; + clock-names = "fck"; + reg = <0x00 0x03b000000 0x00 0x400>, + <0x00 0x050000000 0x00 0x8000000>; + reg-names = "cfg", "data"; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + gpmc,num-cs = <3>; + gpmc,num-waitpins = <2>; + #address-cells = <2>; + #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + }; + + elm0: ecc@25010000 { + compatible = "ti,am64-elm"; + reg = <0x00 0x25010000 0x00 0x2000>; + interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 54 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 54 0>; + clock-names = "fck"; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am64.dtsi b/arch/arm64/boot/dts/ti/k3-am64.dtsi index 016dd8511ca6..c858725133af 100644 --- a/arch/arm64/boot/dts/ti/k3-am64.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64.dtsi @@ -82,6 +82,7 @@ <0x00 0x3b000000 0x00 0x3b000000 0x00 0x00000400>, /* GPMC0_CFG */ <0x00 0x3cd00000 0x00 0x3cd00000 0x00 0x00000200>, /* TIMERMGR0_CONFIG */ <0x00 0x3f004000 0x00 0x3f004000 0x00 0x00000400>, /* GICSS0_REGS */ + <0x00 0x40900000 0x00 0x40900000 0x00 0x00030000>, /* SA2_UL0 */ <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>, /* CTRL_MMR0 */ <0x00 0x44043000 0x00 0x44043000 0x00 0x00000fe0>, /* TI SCI DEBUG */ <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>, /* DMASS */ diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts index ad150c704623..5cf913860f80 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts @@ -676,3 +676,11 @@ pinctrl-0 = <&main_mcan1_pins_default>; phys = <&transceiver2>; }; + +&gpmc0 { + status = "disabled"; +}; + +&elm0 { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts index 2620469a7517..738d0cf6c40a 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts @@ -9,6 +9,7 @@ #include <dt-bindings/phy/phy.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/net/ti-dp83867.h> +#include <dt-bindings/leds/common.h> #include "k3-am642.dtsi" / { @@ -150,6 +151,74 @@ vin-supply = <&com8_ls_en>; gpio = <&main_gpio0 48 GPIO_ACTIVE_HIGH>; }; + + led-controller { + compatible = "gpio-leds"; + + led-0 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <1>; + gpios = <&exp2 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-1 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <2>; + gpios = <&exp2 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-2 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <3>; + gpios = <&exp2 2 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-3 { + color = <LED_COLOR_ID_AMBER>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <4>; + gpios = <&exp2 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-4 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <5>; + gpios = <&exp2 4 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-5 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <6>; + gpios = <&exp2 5 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-6 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <7>; + gpios = <&exp2 6 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-7 { + color = <LED_COLOR_ID_AMBER>; + function = LED_FUNCTION_HEARTBEAT; + function-enumerator = <8>; + linux,default-trigger = "heartbeat"; + gpios = <&exp2 7 GPIO_ACTIVE_HIGH>; + }; + }; }; &main_pmx0 { @@ -330,6 +399,14 @@ "VPP_LDO_EN", "RPI_PS_3V3_En", "RPI_PS_5V0_En", "RPI_HAT_DETECT"; }; + + exp2: gpio@60 { + compatible = "ti,tpic2810"; + reg = <0x60>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "LED1","LED2","LED3","LED4","LED5","LED6","LED7","LED8"; + }; }; &main_i2c3 { @@ -607,3 +684,11 @@ &main_mcan1 { status = "disabled"; }; + +&gpmc0 { + status = "disabled"; +}; + +&elm0 { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi index 8919fede3cd7..4005a73cfea9 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -112,13 +112,13 @@ crypto: crypto@4e00000 { compatible = "ti,am654-sa2ul"; reg = <0x0 0x4e00000 0x0 0x1200>; - power-domains = <&k3_pds 136 TI_SCI_PD_EXCLUSIVE>; + power-domains = <&k3_pds 136 TI_SCI_PD_SHARED>; #address-cells = <2>; #size-cells = <2>; ranges = <0x0 0x04e00000 0x00 0x04e00000 0x0 0x30000>; - dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>, - <&main_udmap 0x4001>; + dmas = <&main_udmap 0xc001>, <&main_udmap 0x4002>, + <&main_udmap 0x4003>; dma-names = "tx", "rx1", "rx2"; dma-coherent; @@ -127,6 +127,7 @@ reg = <0x0 0x4e10000 0x0 0x7d>; interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; clocks = <&k3_clks 136 1>; + status = "disabled"; /* Used by OP-TEE */ }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts index 121975dc8239..7e8552fd2b6a 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts @@ -134,15 +134,17 @@ >; }; - main_usbss0_pins_default: main-usbss0-pins-default { + vdd_sd_dv_pins_default: vdd-sd-dv-pins-default { pinctrl-single,pins = < - J721E_IOPAD(0x120, PIN_OUTPUT, 0) /* (T4) USB0_DRVVBUS */ + J721E_IOPAD(0xd0, PIN_OUTPUT, 7) /* (T5) SPI0_D1.GPIO0_55 */ >; }; +}; - vdd_sd_dv_pins_default: vdd-sd-dv-pins-default { +&main_pmx1 { + main_usbss0_pins_default: main-usbss0-pins-default { pinctrl-single,pins = < - J721E_IOPAD(0xd0, PIN_OUTPUT, 7) /* (T5) SPI0_D1.GPIO0_55 */ + J721E_IOPAD(0x04, PIN_OUTPUT, 0) /* (T4) USB0_DRVVBUS */ >; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi index 16684a2f054d..80a57916bcb3 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi @@ -295,7 +295,16 @@ main_pmx0: pinctrl@11c000 { compatible = "pinctrl-single"; /* Proxy 0 addressing */ - reg = <0x00 0x11c000 0x00 0x2b4>; + reg = <0x00 0x11c000 0x00 0x10c>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; + + main_pmx1: pinctrl@11c11c { + compatible = "pinctrl-single"; + /* Proxy 0 addressing */ + reg = <0x00 0x11c11c 0x00 0xc>; #pinctrl-cells = <1>; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0xffffffff>; @@ -739,6 +748,24 @@ clock-names = "gpio"; }; + watchdog0: watchdog@2200000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x0 0x2200000 0x0 0x100>; + clocks = <&k3_clks 252 1>; + power-domains = <&k3_pds 252 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 252 1>; + assigned-clock-parents = <&k3_clks 252 5>; + }; + + watchdog1: watchdog@2210000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x0 0x2210000 0x0 0x100>; + clocks = <&k3_clks 253 1>; + power-domains = <&k3_pds 253 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 253 1>; + assigned-clock-parents = <&k3_clks 253 5>; + }; + main_r5fss0: r5fss@5c00000 { compatible = "ti,j7200-r5fss"; ti,cluster-mode = <1>; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi index ff13bbeed30c..e5be78a58682 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi @@ -375,4 +375,24 @@ ti,loczrama = <1>; }; }; + + mcu_crypto: crypto@40900000 { + compatible = "ti,j721e-sa2ul"; + reg = <0x00 0x40900000 0x00 0x1200>; + power-domains = <&k3_pds 265 TI_SCI_PD_SHARED>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x40900000 0x00 0x40900000 0x00 0x30000>; + dmas = <&mcu_udmap 0xf501>, <&mcu_udmap 0x7502>, + <&mcu_udmap 0x7503>; + dma-names = "tx", "rx1", "rx2"; + dma-coherent; + + rng: rng@40910000 { + compatible = "inside-secure,safexcel-eip76"; + reg = <0x00 0x40910000 0x00 0x7d>; + interrupts = <GIC_SPI 945 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; /* Used by OP-TEE */ + }; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi index 43b6cf5791ee..917c9dc99efa 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi @@ -343,7 +343,7 @@ compatible = "inside-secure,safexcel-eip76"; reg = <0x0 0x4e10000 0x0 0x7d>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&k3_clks 264 1>; + clocks = <&k3_clks 264 2>; }; }; diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index c6e82787cca3..d31545cc145b 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -18,6 +18,7 @@ CONFIG_NUMA_BALANCING=y CONFIG_MEMCG=y CONFIG_BLK_CGROUP=y CONFIG_CGROUP_PIDS=y +CONFIG_CGROUP_FREEZER=y CONFIG_CGROUP_HUGETLB=y CONFIG_CPUSETS=y CONFIG_CGROUP_DEVICE=y @@ -33,8 +34,8 @@ CONFIG_ARCH_ACTIONS=y CONFIG_ARCH_SUNXI=y CONFIG_ARCH_ALPINE=y CONFIG_ARCH_APPLE=y +CONFIG_ARCH_BCM=y CONFIG_ARCH_BCM2835=y -CONFIG_ARCH_BCM4908=y CONFIG_ARCH_BCMBCA=y CONFIG_ARCH_BCM_IPROC=y CONFIG_ARCH_BERLIN=y @@ -48,6 +49,7 @@ CONFIG_ARCH_KEEMBAY=y CONFIG_ARCH_MEDIATEK=y CONFIG_ARCH_MESON=y CONFIG_ARCH_MVEBU=y +CONFIG_ARCH_NXP=y CONFIG_ARCH_MXC=y CONFIG_ARCH_NPCM=y CONFIG_ARCH_QCOM=y @@ -80,7 +82,6 @@ CONFIG_RANDOMIZE_BASE=y CONFIG_HIBERNATION=y CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y CONFIG_ENERGY_MODEL=y -CONFIG_ARM_CPUIDLE=y CONFIG_ARM_PSCI_CPUIDLE=y CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_STAT=y @@ -102,6 +103,8 @@ CONFIG_ARM_SCMI_CPUFREQ=y CONFIG_ARM_TEGRA186_CPUFREQ=y CONFIG_QORIQ_CPUFREQ=y CONFIG_ACPI=y +CONFIG_ACPI_HOTPLUG_MEMORY=y +CONFIG_ACPI_HMAT=y CONFIG_ACPI_APEI=y CONFIG_ACPI_APEI_GHES=y CONFIG_ACPI_APEI_PCIEAER=y @@ -126,6 +129,8 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_COMPAT_BRK is not set +CONFIG_MEMORY_HOTPLUG=y +CONFIG_MEMORY_HOTREMOVE=y CONFIG_KSM=y CONFIG_MEMORY_FAILURE=y CONFIG_TRANSPARENT_HUGEPAGE=y @@ -139,12 +144,16 @@ CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IPV6=m CONFIG_NETFILTER=y +CONFIG_BRIDGE_NETFILTER=m CONFIG_NF_CONNTRACK=m CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NETFILTER_XT_MARK=m CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_IPVS=m +CONFIG_IP_VS=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m @@ -354,6 +363,7 @@ CONFIG_SMSC911X=y CONFIG_SNI_AVE=y CONFIG_SNI_NETSEC=y CONFIG_STMMAC_ETH=m +CONFIG_DWMAC_TEGRA=m CONFIG_TI_K3_AM65_CPSW_NUSS=y CONFIG_QCOM_IPA=m CONFIG_MESON_GXL_PHY=m @@ -474,6 +484,7 @@ CONFIG_I2C_QCOM_GENI=m CONFIG_I2C_QUP=y CONFIG_I2C_RIIC=y CONFIG_I2C_RK3X=y +CONFIG_I2C_RZV2M=m CONFIG_I2C_S3C2410=y CONFIG_I2C_SH_MOBILE=y CONFIG_I2C_TEGRA=y @@ -506,6 +517,8 @@ CONFIG_SPI_QCOM_GENI=m CONFIG_SPI_S3C64XX=y CONFIG_SPI_SH_MSIOF=m CONFIG_SPI_SUN6I=y +CONFIG_SPI_TEGRA210_QUAD=m +CONFIG_SPI_TEGRA114=m CONFIG_SPI_SPIDEV=m CONFIG_SPMI=y CONFIG_PINCTRL_MAX77620=y @@ -534,6 +547,7 @@ CONFIG_PINCTRL_QDF2XXX=y CONFIG_PINCTRL_QCOM_SPMI_PMIC=y CONFIG_PINCTRL_SC7180=y CONFIG_PINCTRL_SC7280=y +CONFIG_PINCTRL_SC8180X=y CONFIG_PINCTRL_SC8280XP=y CONFIG_PINCTRL_SDM845=y CONFIG_PINCTRL_SM8150=y @@ -584,6 +598,7 @@ CONFIG_SENSORS_INA2XX=m CONFIG_SENSORS_INA3221=m CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y CONFIG_CPU_THERMAL=y +CONFIG_DEVFREQ_THERMAL=y CONFIG_THERMAL_EMULATION=y CONFIG_IMX_SC_THERMAL=m CONFIG_IMX8MM_THERMAL=m @@ -794,6 +809,8 @@ CONFIG_SND_SOC_APQ8016_SBC=m CONFIG_SND_SOC_MSM8996=m CONFIG_SND_SOC_SDM845=m CONFIG_SND_SOC_SM8250=m +CONFIG_SND_SOC_SC7180=m +CONFIG_SND_SOC_SC7280=m CONFIG_SND_SOC_ROCKCHIP=m CONFIG_SND_SOC_ROCKCHIP_SPDIF=m CONFIG_SND_SOC_ROCKCHIP_RT5645=m @@ -914,6 +931,7 @@ CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ACPI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_OF_ARASAN=y +CONFIG_MMC_SDHCI_OF_DWCMSHC=y CONFIG_MMC_SDHCI_OF_ESDHC=y CONFIG_MMC_SDHCI_CADENCE=y CONFIG_MMC_SDHCI_ESDHC_IMX=y @@ -939,6 +957,7 @@ CONFIG_SCSI_UFSHCD=y CONFIG_SCSI_UFSHCD_PLATFORM=y CONFIG_SCSI_UFS_QCOM=m CONFIG_SCSI_UFS_HISI=y +CONFIG_SCSI_UFS_RENESAS=m CONFIG_SCSI_UFS_EXYNOS=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -995,7 +1014,7 @@ CONFIG_MV_XOR=y CONFIG_MV_XOR_V2=y CONFIG_OWL_DMA=y CONFIG_PL330_DMA=y -CONFIG_TEGRA186_GPC_DMA=m +CONFIG_TEGRA186_GPC_DMA=y CONFIG_TEGRA20_APB_DMA=y CONFIG_TEGRA210_ADMA=m CONFIG_QCOM_BAM_DMA=y @@ -1058,6 +1077,7 @@ CONFIG_MSM_GCC_8998=y CONFIG_QCS_GCC_404=y CONFIG_SC_GCC_7180=y CONFIG_SC_GCC_7280=y +CONFIG_SC_GCC_8180X=y CONFIG_SC_GCC_8280XP=y CONFIG_SDM_CAMCC_845=m CONFIG_SDM_GPUCC_845=y @@ -1088,11 +1108,13 @@ CONFIG_ARM_SMMU_V3=y CONFIG_MTK_IOMMU=y CONFIG_QCOM_IOMMU=y CONFIG_REMOTEPROC=y +CONFIG_QCOM_Q6V5_ADSP=m CONFIG_QCOM_Q6V5_MSS=m CONFIG_QCOM_Q6V5_PAS=m CONFIG_QCOM_SYSMON=m CONFIG_QCOM_WCNSS_PIL=m CONFIG_RPMSG_CHAR=m +CONFIG_RPMSG_CTRL=m CONFIG_RPMSG_QCOM_GLINK_RPM=y CONFIG_RPMSG_QCOM_GLINK_SMEM=m CONFIG_RPMSG_QCOM_SMD=y @@ -1109,6 +1131,8 @@ CONFIG_QCOM_AOSS_QMP=y CONFIG_QCOM_COMMAND_DB=y CONFIG_QCOM_CPR=y CONFIG_QCOM_GENI_SE=y +CONFIG_QCOM_LLCC=m +CONFIG_QCOM_OCMEM=m CONFIG_QCOM_RMTFS_MEM=m CONFIG_QCOM_RPMH=y CONFIG_QCOM_RPMHPD=y @@ -1118,6 +1142,7 @@ CONFIG_QCOM_SMD_RPM=y CONFIG_QCOM_SMP2P=y CONFIG_QCOM_SMSM=y CONFIG_QCOM_SOCINFO=m +CONFIG_QCOM_SPM=m CONFIG_QCOM_STATS=m CONFIG_QCOM_WCNSS_CTRL=m CONFIG_QCOM_APR=m @@ -1207,6 +1232,7 @@ CONFIG_PHY_HISTB_COMBPHY=y CONFIG_PHY_HISI_INNO_USB2=y CONFIG_PHY_MVEBU_CP110_COMPHY=y CONFIG_PHY_MTK_TPHY=y +CONFIG_PHY_QCOM_EDP=m CONFIG_PHY_QCOM_PCIE2=m CONFIG_PHY_QCOM_QMP=m CONFIG_PHY_QCOM_QUSB2=m @@ -1229,8 +1255,14 @@ CONFIG_PHY_UNIPHIER_USB3=y CONFIG_PHY_TEGRA_XUSB=y CONFIG_PHY_AM654_SERDES=m CONFIG_PHY_J721E_WIZ=m +CONFIG_ARM_CCI_PMU=m +CONFIG_ARM_CCN=m +CONFIG_ARM_CMN=m CONFIG_ARM_SMMU_V3_PMU=m +CONFIG_ARM_DSU_PMU=m CONFIG_FSL_IMX8_DDR_PMU=m +CONFIG_ARM_SPE_PMU=m +CONFIG_ARM_DMC620_PMU=m CONFIG_QCOM_L2_PMU=y CONFIG_QCOM_L3_PMU=y CONFIG_HISI_PMU=y @@ -1269,6 +1301,7 @@ CONFIG_INTERCONNECT_QCOM_OSM_L3=m CONFIG_INTERCONNECT_QCOM_QCS404=m CONFIG_INTERCONNECT_QCOM_SC7180=m CONFIG_INTERCONNECT_QCOM_SC7280=y +CONFIG_INTERCONNECT_QCOM_SC8180X=y CONFIG_INTERCONNECT_QCOM_SC8280XP=y CONFIG_INTERCONNECT_QCOM_SDM845=y CONFIG_INTERCONNECT_QCOM_SM8150=m @@ -1325,4 +1358,12 @@ CONFIG_DEBUG_FS=y # CONFIG_SCHED_DEBUG is not set # CONFIG_DEBUG_PREEMPT is not set # CONFIG_FTRACE is not set +CONFIG_CORESIGHT=m +CONFIG_CORESIGHT_LINK_AND_SINK_TMC=m +CONFIG_CORESIGHT_CATU=m +CONFIG_CORESIGHT_SINK_TPIU=m +CONFIG_CORESIGHT_SINK_ETBV10=m +CONFIG_CORESIGHT_STM=m +CONFIG_CORESIGHT_CPU_DEBUG=m +CONFIG_CORESIGHT_CTI=m CONFIG_MEMTEST=y diff --git a/arch/arm64/crypto/ghash-ce-core.S b/arch/arm64/crypto/ghash-ce-core.S index 7868330dd54e..ebe5558929b7 100644 --- a/arch/arm64/crypto/ghash-ce-core.S +++ b/arch/arm64/crypto/ghash-ce-core.S @@ -6,6 +6,7 @@ */ #include <linux/linkage.h> +#include <linux/cfi_types.h> #include <asm/assembler.h> SHASH .req v0 @@ -350,11 +351,11 @@ CPU_LE( rev64 T1.16b, T1.16b ) * void pmull_ghash_update(int blocks, u64 dg[], const char *src, * struct ghash_key const *k, const char *head) */ -SYM_FUNC_START(pmull_ghash_update_p64) +SYM_TYPED_FUNC_START(pmull_ghash_update_p64) __pmull_ghash p64 SYM_FUNC_END(pmull_ghash_update_p64) -SYM_FUNC_START(pmull_ghash_update_p8) +SYM_TYPED_FUNC_START(pmull_ghash_update_p8) __pmull_ghash p8 SYM_FUNC_END(pmull_ghash_update_p8) diff --git a/arch/arm64/crypto/sm3-ce-core.S b/arch/arm64/crypto/sm3-ce-core.S index ef97d3187cb7..ca70cfacd0d0 100644 --- a/arch/arm64/crypto/sm3-ce-core.S +++ b/arch/arm64/crypto/sm3-ce-core.S @@ -6,6 +6,7 @@ */ #include <linux/linkage.h> +#include <linux/cfi_types.h> #include <asm/assembler.h> .irp b, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 @@ -73,7 +74,7 @@ * int blocks) */ .text -SYM_FUNC_START(sm3_ce_transform) +SYM_TYPED_FUNC_START(sm3_ce_transform) /* load state */ ld1 {v8.4s-v9.4s}, [x0] rev64 v8.4s, v8.4s diff --git a/arch/arm64/include/asm/alternative-macros.h b/arch/arm64/include/asm/alternative-macros.h index 7e157ab6cd50..3622e9f4fb44 100644 --- a/arch/arm64/include/asm/alternative-macros.h +++ b/arch/arm64/include/asm/alternative-macros.h @@ -2,10 +2,22 @@ #ifndef __ASM_ALTERNATIVE_MACROS_H #define __ASM_ALTERNATIVE_MACROS_H +#include <linux/const.h> +#include <vdso/bits.h> + #include <asm/cpucaps.h> #include <asm/insn-def.h> -#define ARM64_CB_PATCH ARM64_NCAPS +/* + * Binutils 2.27.0 can't handle a 'UL' suffix on constants, so for the assembly + * macros below we must use we must use `(1 << ARM64_CB_SHIFT)`. + */ +#define ARM64_CB_SHIFT 15 +#define ARM64_CB_BIT BIT(ARM64_CB_SHIFT) + +#if ARM64_NCAPS >= ARM64_CB_BIT +#error "cpucaps have overflown ARM64_CB_BIT" +#endif #ifndef __ASSEMBLY__ @@ -73,8 +85,8 @@ #define _ALTERNATIVE_CFG(oldinstr, newinstr, feature, cfg, ...) \ __ALTERNATIVE_CFG(oldinstr, newinstr, feature, IS_ENABLED(cfg)) -#define ALTERNATIVE_CB(oldinstr, cb) \ - __ALTERNATIVE_CFG_CB(oldinstr, ARM64_CB_PATCH, 1, cb) +#define ALTERNATIVE_CB(oldinstr, feature, cb) \ + __ALTERNATIVE_CFG_CB(oldinstr, (1 << ARM64_CB_SHIFT) | (feature), 1, cb) #else #include <asm/assembler.h> @@ -82,7 +94,7 @@ .macro altinstruction_entry orig_offset alt_offset feature orig_len alt_len .word \orig_offset - . .word \alt_offset - . - .hword \feature + .hword (\feature) .byte \orig_len .byte \alt_len .endm @@ -141,10 +153,10 @@ 661: .endm -.macro alternative_cb cb +.macro alternative_cb cap, cb .set .Lasm_alt_mode, 0 .pushsection .altinstructions, "a" - altinstruction_entry 661f, \cb, ARM64_CB_PATCH, 662f-661f, 0 + altinstruction_entry 661f, \cb, (1 << ARM64_CB_SHIFT) | \cap, 662f-661f, 0 .popsection 661: .endm @@ -207,4 +219,46 @@ alternative_endif #define ALTERNATIVE(oldinstr, newinstr, ...) \ _ALTERNATIVE_CFG(oldinstr, newinstr, __VA_ARGS__, 1) +#ifndef __ASSEMBLY__ + +#include <linux/types.h> + +static __always_inline bool +alternative_has_feature_likely(unsigned long feature) +{ + compiletime_assert(feature < ARM64_NCAPS, + "feature must be < ARM64_NCAPS"); + + asm_volatile_goto( + ALTERNATIVE_CB("b %l[l_no]", %[feature], alt_cb_patch_nops) + : + : [feature] "i" (feature) + : + : l_no); + + return true; +l_no: + return false; +} + +static __always_inline bool +alternative_has_feature_unlikely(unsigned long feature) +{ + compiletime_assert(feature < ARM64_NCAPS, + "feature must be < ARM64_NCAPS"); + + asm_volatile_goto( + ALTERNATIVE("nop", "b %l[l_yes]", %[feature]) + : + : [feature] "i" (feature) + : + : l_yes); + + return false; +l_yes: + return true; +} + +#endif /* __ASSEMBLY__ */ + #endif /* __ASM_ALTERNATIVE_MACROS_H */ diff --git a/arch/arm64/include/asm/assembler.h b/arch/arm64/include/asm/assembler.h index 5846145be523..e5957a53be39 100644 --- a/arch/arm64/include/asm/assembler.h +++ b/arch/arm64/include/asm/assembler.h @@ -293,7 +293,7 @@ alternative_endif alternative_if_not ARM64_KVM_PROTECTED_MODE ASM_BUG() alternative_else_nop_endif -alternative_cb kvm_compute_final_ctr_el0 +alternative_cb ARM64_ALWAYS_SYSTEM, kvm_compute_final_ctr_el0 movz \reg, #0 movk \reg, #0, lsl #16 movk \reg, #0, lsl #32 @@ -384,8 +384,8 @@ alternative_cb_end .macro tcr_compute_pa_size, tcr, pos, tmp0, tmp1 mrs \tmp0, ID_AA64MMFR0_EL1 // Narrow PARange to fit the PS field in TCR_ELx - ubfx \tmp0, \tmp0, #ID_AA64MMFR0_PARANGE_SHIFT, #3 - mov \tmp1, #ID_AA64MMFR0_PARANGE_MAX + ubfx \tmp0, \tmp0, #ID_AA64MMFR0_EL1_PARANGE_SHIFT, #3 + mov \tmp1, #ID_AA64MMFR0_EL1_PARANGE_MAX cmp \tmp0, \tmp1 csel \tmp0, \tmp1, \tmp0, hi bfi \tcr, \tmp0, \pos, #3 @@ -512,7 +512,7 @@ alternative_endif */ .macro reset_pmuserenr_el0, tmpreg mrs \tmpreg, id_aa64dfr0_el1 - sbfx \tmpreg, \tmpreg, #ID_AA64DFR0_PMUVER_SHIFT, #4 + sbfx \tmpreg, \tmpreg, #ID_AA64DFR0_EL1_PMUVer_SHIFT, #4 cmp \tmpreg, #1 // Skip if no PMU present b.lt 9000f msr pmuserenr_el0, xzr // Disable PMU access from EL0 @@ -524,7 +524,7 @@ alternative_endif */ .macro reset_amuserenr_el0, tmpreg mrs \tmpreg, id_aa64pfr0_el1 // Check ID_AA64PFR0_EL1 - ubfx \tmpreg, \tmpreg, #ID_AA64PFR0_AMU_SHIFT, #4 + ubfx \tmpreg, \tmpreg, #ID_AA64PFR0_EL1_AMU_SHIFT, #4 cbz \tmpreg, .Lskip_\@ // Skip if no AMU present msr_s SYS_AMUSERENR_EL0, xzr // Disable AMU access from EL0 .Lskip_\@: @@ -612,7 +612,7 @@ alternative_endif .macro offset_ttbr1, ttbr, tmp #ifdef CONFIG_ARM64_VA_BITS_52 mrs_s \tmp, SYS_ID_AA64MMFR2_EL1 - and \tmp, \tmp, #(0xf << ID_AA64MMFR2_LVA_SHIFT) + and \tmp, \tmp, #(0xf << ID_AA64MMFR2_EL1_VARange_SHIFT) cbnz \tmp, .Lskipoffs_\@ orr \ttbr, \ttbr, #TTBR1_BADDR_4852_OFFSET .Lskipoffs_\@ : @@ -877,7 +877,7 @@ alternative_endif .macro __mitigate_spectre_bhb_loop tmp #ifdef CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY -alternative_cb spectre_bhb_patch_loop_iter +alternative_cb ARM64_ALWAYS_SYSTEM, spectre_bhb_patch_loop_iter mov \tmp, #32 // Patched to correct the immediate alternative_cb_end .Lspectre_bhb_loop\@: @@ -890,7 +890,7 @@ alternative_cb_end .macro mitigate_spectre_bhb_loop tmp #ifdef CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY -alternative_cb spectre_bhb_patch_loop_mitigation_enable +alternative_cb ARM64_ALWAYS_SYSTEM, spectre_bhb_patch_loop_mitigation_enable b .L_spectre_bhb_loop_done\@ // Patched to NOP alternative_cb_end __mitigate_spectre_bhb_loop \tmp @@ -904,7 +904,7 @@ alternative_cb_end stp x0, x1, [sp, #-16]! stp x2, x3, [sp, #-16]! mov w0, #ARM_SMCCC_ARCH_WORKAROUND_3 -alternative_cb smccc_patch_fw_mitigation_conduit +alternative_cb ARM64_ALWAYS_SYSTEM, smccc_patch_fw_mitigation_conduit nop // Patched to SMC/HVC #0 alternative_cb_end ldp x2, x3, [sp], #16 @@ -914,7 +914,7 @@ alternative_cb_end .macro mitigate_spectre_bhb_clear_insn #ifdef CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY -alternative_cb spectre_bhb_patch_clearbhb +alternative_cb ARM64_ALWAYS_SYSTEM, spectre_bhb_patch_clearbhb /* Patched to NOP when not supported */ clearbhb isb diff --git a/arch/arm64/include/asm/atomic_ll_sc.h b/arch/arm64/include/asm/atomic_ll_sc.h index fe0db8d416fb..0890e4f568fb 100644 --- a/arch/arm64/include/asm/atomic_ll_sc.h +++ b/arch/arm64/include/asm/atomic_ll_sc.h @@ -12,19 +12,6 @@ #include <linux/stringify.h> -#ifdef CONFIG_ARM64_LSE_ATOMICS -#define __LL_SC_FALLBACK(asm_ops) \ -" b 3f\n" \ -" .subsection 1\n" \ -"3:\n" \ -asm_ops "\n" \ -" b 4f\n" \ -" .previous\n" \ -"4:\n" -#else -#define __LL_SC_FALLBACK(asm_ops) asm_ops -#endif - #ifndef CONFIG_CC_HAS_K_CONSTRAINT #define K #endif @@ -36,38 +23,36 @@ asm_ops "\n" \ */ #define ATOMIC_OP(op, asm_op, constraint) \ -static inline void \ +static __always_inline void \ __ll_sc_atomic_##op(int i, atomic_t *v) \ { \ unsigned long tmp; \ int result; \ \ asm volatile("// atomic_" #op "\n" \ - __LL_SC_FALLBACK( \ " prfm pstl1strm, %2\n" \ "1: ldxr %w0, %2\n" \ " " #asm_op " %w0, %w0, %w3\n" \ " stxr %w1, %w0, %2\n" \ - " cbnz %w1, 1b\n") \ + " cbnz %w1, 1b\n" \ : "=&r" (result), "=&r" (tmp), "+Q" (v->counter) \ : __stringify(constraint) "r" (i)); \ } #define ATOMIC_OP_RETURN(name, mb, acq, rel, cl, op, asm_op, constraint)\ -static inline int \ +static __always_inline int \ __ll_sc_atomic_##op##_return##name(int i, atomic_t *v) \ { \ unsigned long tmp; \ int result; \ \ asm volatile("// atomic_" #op "_return" #name "\n" \ - __LL_SC_FALLBACK( \ " prfm pstl1strm, %2\n" \ "1: ld" #acq "xr %w0, %2\n" \ " " #asm_op " %w0, %w0, %w3\n" \ " st" #rel "xr %w1, %w0, %2\n" \ " cbnz %w1, 1b\n" \ - " " #mb ) \ + " " #mb \ : "=&r" (result), "=&r" (tmp), "+Q" (v->counter) \ : __stringify(constraint) "r" (i) \ : cl); \ @@ -76,20 +61,19 @@ __ll_sc_atomic_##op##_return##name(int i, atomic_t *v) \ } #define ATOMIC_FETCH_OP(name, mb, acq, rel, cl, op, asm_op, constraint) \ -static inline int \ +static __always_inline int \ __ll_sc_atomic_fetch_##op##name(int i, atomic_t *v) \ { \ unsigned long tmp; \ int val, result; \ \ asm volatile("// atomic_fetch_" #op #name "\n" \ - __LL_SC_FALLBACK( \ " prfm pstl1strm, %3\n" \ "1: ld" #acq "xr %w0, %3\n" \ " " #asm_op " %w1, %w0, %w4\n" \ " st" #rel "xr %w2, %w1, %3\n" \ " cbnz %w2, 1b\n" \ - " " #mb ) \ + " " #mb \ : "=&r" (result), "=&r" (val), "=&r" (tmp), "+Q" (v->counter) \ : __stringify(constraint) "r" (i) \ : cl); \ @@ -135,38 +119,36 @@ ATOMIC_OPS(andnot, bic, ) #undef ATOMIC_OP #define ATOMIC64_OP(op, asm_op, constraint) \ -static inline void \ +static __always_inline void \ __ll_sc_atomic64_##op(s64 i, atomic64_t *v) \ { \ s64 result; \ unsigned long tmp; \ \ asm volatile("// atomic64_" #op "\n" \ - __LL_SC_FALLBACK( \ " prfm pstl1strm, %2\n" \ "1: ldxr %0, %2\n" \ " " #asm_op " %0, %0, %3\n" \ " stxr %w1, %0, %2\n" \ - " cbnz %w1, 1b") \ + " cbnz %w1, 1b" \ : "=&r" (result), "=&r" (tmp), "+Q" (v->counter) \ : __stringify(constraint) "r" (i)); \ } #define ATOMIC64_OP_RETURN(name, mb, acq, rel, cl, op, asm_op, constraint)\ -static inline long \ +static __always_inline long \ __ll_sc_atomic64_##op##_return##name(s64 i, atomic64_t *v) \ { \ s64 result; \ unsigned long tmp; \ \ asm volatile("// atomic64_" #op "_return" #name "\n" \ - __LL_SC_FALLBACK( \ " prfm pstl1strm, %2\n" \ "1: ld" #acq "xr %0, %2\n" \ " " #asm_op " %0, %0, %3\n" \ " st" #rel "xr %w1, %0, %2\n" \ " cbnz %w1, 1b\n" \ - " " #mb ) \ + " " #mb \ : "=&r" (result), "=&r" (tmp), "+Q" (v->counter) \ : __stringify(constraint) "r" (i) \ : cl); \ @@ -175,20 +157,19 @@ __ll_sc_atomic64_##op##_return##name(s64 i, atomic64_t *v) \ } #define ATOMIC64_FETCH_OP(name, mb, acq, rel, cl, op, asm_op, constraint)\ -static inline long \ +static __always_inline long \ __ll_sc_atomic64_fetch_##op##name(s64 i, atomic64_t *v) \ { \ s64 result, val; \ unsigned long tmp; \ \ asm volatile("// atomic64_fetch_" #op #name "\n" \ - __LL_SC_FALLBACK( \ " prfm pstl1strm, %3\n" \ "1: ld" #acq "xr %0, %3\n" \ " " #asm_op " %1, %0, %4\n" \ " st" #rel "xr %w2, %1, %3\n" \ " cbnz %w2, 1b\n" \ - " " #mb ) \ + " " #mb \ : "=&r" (result), "=&r" (val), "=&r" (tmp), "+Q" (v->counter) \ : __stringify(constraint) "r" (i) \ : cl); \ @@ -233,14 +214,13 @@ ATOMIC64_OPS(andnot, bic, ) #undef ATOMIC64_OP_RETURN #undef ATOMIC64_OP -static inline s64 +static __always_inline s64 __ll_sc_atomic64_dec_if_positive(atomic64_t *v) { s64 result; unsigned long tmp; asm volatile("// atomic64_dec_if_positive\n" - __LL_SC_FALLBACK( " prfm pstl1strm, %2\n" "1: ldxr %0, %2\n" " subs %0, %0, #1\n" @@ -248,7 +228,7 @@ __ll_sc_atomic64_dec_if_positive(atomic64_t *v) " stlxr %w1, %0, %2\n" " cbnz %w1, 1b\n" " dmb ish\n" - "2:") + "2:" : "=&r" (result), "=&r" (tmp), "+Q" (v->counter) : : "cc", "memory"); @@ -257,7 +237,7 @@ __ll_sc_atomic64_dec_if_positive(atomic64_t *v) } #define __CMPXCHG_CASE(w, sfx, name, sz, mb, acq, rel, cl, constraint) \ -static inline u##sz \ +static __always_inline u##sz \ __ll_sc__cmpxchg_case_##name##sz(volatile void *ptr, \ unsigned long old, \ u##sz new) \ @@ -274,7 +254,6 @@ __ll_sc__cmpxchg_case_##name##sz(volatile void *ptr, \ old = (u##sz)old; \ \ asm volatile( \ - __LL_SC_FALLBACK( \ " prfm pstl1strm, %[v]\n" \ "1: ld" #acq "xr" #sfx "\t%" #w "[oldval], %[v]\n" \ " eor %" #w "[tmp], %" #w "[oldval], %" #w "[old]\n" \ @@ -282,7 +261,7 @@ __ll_sc__cmpxchg_case_##name##sz(volatile void *ptr, \ " st" #rel "xr" #sfx "\t%w[tmp], %" #w "[new], %[v]\n" \ " cbnz %w[tmp], 1b\n" \ " " #mb "\n" \ - "2:") \ + "2:" \ : [tmp] "=&r" (tmp), [oldval] "=&r" (oldval), \ [v] "+Q" (*(u##sz *)ptr) \ : [old] __stringify(constraint) "r" (old), [new] "r" (new) \ @@ -316,7 +295,7 @@ __CMPXCHG_CASE( , , mb_, 64, dmb ish, , l, "memory", L) #undef __CMPXCHG_CASE #define __CMPXCHG_DBL(name, mb, rel, cl) \ -static inline long \ +static __always_inline long \ __ll_sc__cmpxchg_double##name(unsigned long old1, \ unsigned long old2, \ unsigned long new1, \ @@ -326,7 +305,6 @@ __ll_sc__cmpxchg_double##name(unsigned long old1, \ unsigned long tmp, ret; \ \ asm volatile("// __cmpxchg_double" #name "\n" \ - __LL_SC_FALLBACK( \ " prfm pstl1strm, %2\n" \ "1: ldxp %0, %1, %2\n" \ " eor %0, %0, %3\n" \ @@ -336,7 +314,7 @@ __ll_sc__cmpxchg_double##name(unsigned long old1, \ " st" #rel "xp %w0, %5, %6, %2\n" \ " cbnz %w0, 1b\n" \ " " #mb "\n" \ - "2:") \ + "2:" \ : "=&r" (tmp), "=&r" (ret), "+Q" (*(unsigned long *)ptr) \ : "r" (old1), "r" (old2), "r" (new1), "r" (new2) \ : cl); \ diff --git a/arch/arm64/include/asm/atomic_lse.h b/arch/arm64/include/asm/atomic_lse.h index 5d460f6b7675..52075e93de6c 100644 --- a/arch/arm64/include/asm/atomic_lse.h +++ b/arch/arm64/include/asm/atomic_lse.h @@ -11,7 +11,8 @@ #define __ASM_ATOMIC_LSE_H #define ATOMIC_OP(op, asm_op) \ -static inline void __lse_atomic_##op(int i, atomic_t *v) \ +static __always_inline void \ +__lse_atomic_##op(int i, atomic_t *v) \ { \ asm volatile( \ __LSE_PREAMBLE \ @@ -25,7 +26,7 @@ ATOMIC_OP(or, stset) ATOMIC_OP(xor, steor) ATOMIC_OP(add, stadd) -static inline void __lse_atomic_sub(int i, atomic_t *v) +static __always_inline void __lse_atomic_sub(int i, atomic_t *v) { __lse_atomic_add(-i, v); } @@ -33,7 +34,8 @@ static inline void __lse_atomic_sub(int i, atomic_t *v) #undef ATOMIC_OP #define ATOMIC_FETCH_OP(name, mb, op, asm_op, cl...) \ -static inline int __lse_atomic_fetch_##op##name(int i, atomic_t *v) \ +static __always_inline int \ +__lse_atomic_fetch_##op##name(int i, atomic_t *v) \ { \ int old; \ \ @@ -63,7 +65,8 @@ ATOMIC_FETCH_OPS(add, ldadd) #undef ATOMIC_FETCH_OPS #define ATOMIC_FETCH_OP_SUB(name) \ -static inline int __lse_atomic_fetch_sub##name(int i, atomic_t *v) \ +static __always_inline int \ +__lse_atomic_fetch_sub##name(int i, atomic_t *v) \ { \ return __lse_atomic_fetch_add##name(-i, v); \ } @@ -76,12 +79,14 @@ ATOMIC_FETCH_OP_SUB( ) #undef ATOMIC_FETCH_OP_SUB #define ATOMIC_OP_ADD_SUB_RETURN(name) \ -static inline int __lse_atomic_add_return##name(int i, atomic_t *v) \ +static __always_inline int \ +__lse_atomic_add_return##name(int i, atomic_t *v) \ { \ return __lse_atomic_fetch_add##name(i, v) + i; \ } \ \ -static inline int __lse_atomic_sub_return##name(int i, atomic_t *v) \ +static __always_inline int \ +__lse_atomic_sub_return##name(int i, atomic_t *v) \ { \ return __lse_atomic_fetch_sub(i, v) - i; \ } @@ -93,13 +98,14 @@ ATOMIC_OP_ADD_SUB_RETURN( ) #undef ATOMIC_OP_ADD_SUB_RETURN -static inline void __lse_atomic_and(int i, atomic_t *v) +static __always_inline void __lse_atomic_and(int i, atomic_t *v) { return __lse_atomic_andnot(~i, v); } #define ATOMIC_FETCH_OP_AND(name, mb, cl...) \ -static inline int __lse_atomic_fetch_and##name(int i, atomic_t *v) \ +static __always_inline int \ +__lse_atomic_fetch_and##name(int i, atomic_t *v) \ { \ return __lse_atomic_fetch_andnot##name(~i, v); \ } @@ -112,7 +118,8 @@ ATOMIC_FETCH_OP_AND( , al, "memory") #undef ATOMIC_FETCH_OP_AND #define ATOMIC64_OP(op, asm_op) \ -static inline void __lse_atomic64_##op(s64 i, atomic64_t *v) \ +static __always_inline void \ +__lse_atomic64_##op(s64 i, atomic64_t *v) \ { \ asm volatile( \ __LSE_PREAMBLE \ @@ -126,7 +133,7 @@ ATOMIC64_OP(or, stset) ATOMIC64_OP(xor, steor) ATOMIC64_OP(add, stadd) -static inline void __lse_atomic64_sub(s64 i, atomic64_t *v) +static __always_inline void __lse_atomic64_sub(s64 i, atomic64_t *v) { __lse_atomic64_add(-i, v); } @@ -134,7 +141,8 @@ static inline void __lse_atomic64_sub(s64 i, atomic64_t *v) #undef ATOMIC64_OP #define ATOMIC64_FETCH_OP(name, mb, op, asm_op, cl...) \ -static inline long __lse_atomic64_fetch_##op##name(s64 i, atomic64_t *v)\ +static __always_inline long \ +__lse_atomic64_fetch_##op##name(s64 i, atomic64_t *v) \ { \ s64 old; \ \ @@ -164,7 +172,8 @@ ATOMIC64_FETCH_OPS(add, ldadd) #undef ATOMIC64_FETCH_OPS #define ATOMIC64_FETCH_OP_SUB(name) \ -static inline long __lse_atomic64_fetch_sub##name(s64 i, atomic64_t *v) \ +static __always_inline long \ +__lse_atomic64_fetch_sub##name(s64 i, atomic64_t *v) \ { \ return __lse_atomic64_fetch_add##name(-i, v); \ } @@ -177,12 +186,14 @@ ATOMIC64_FETCH_OP_SUB( ) #undef ATOMIC64_FETCH_OP_SUB #define ATOMIC64_OP_ADD_SUB_RETURN(name) \ -static inline long __lse_atomic64_add_return##name(s64 i, atomic64_t *v)\ +static __always_inline long \ +__lse_atomic64_add_return##name(s64 i, atomic64_t *v) \ { \ return __lse_atomic64_fetch_add##name(i, v) + i; \ } \ \ -static inline long __lse_atomic64_sub_return##name(s64 i, atomic64_t *v)\ +static __always_inline long \ +__lse_atomic64_sub_return##name(s64 i, atomic64_t *v) \ { \ return __lse_atomic64_fetch_sub##name(i, v) - i; \ } @@ -194,13 +205,14 @@ ATOMIC64_OP_ADD_SUB_RETURN( ) #undef ATOMIC64_OP_ADD_SUB_RETURN -static inline void __lse_atomic64_and(s64 i, atomic64_t *v) +static __always_inline void __lse_atomic64_and(s64 i, atomic64_t *v) { return __lse_atomic64_andnot(~i, v); } #define ATOMIC64_FETCH_OP_AND(name, mb, cl...) \ -static inline long __lse_atomic64_fetch_and##name(s64 i, atomic64_t *v) \ +static __always_inline long \ +__lse_atomic64_fetch_and##name(s64 i, atomic64_t *v) \ { \ return __lse_atomic64_fetch_andnot##name(~i, v); \ } @@ -212,7 +224,7 @@ ATOMIC64_FETCH_OP_AND( , al, "memory") #undef ATOMIC64_FETCH_OP_AND -static inline s64 __lse_atomic64_dec_if_positive(atomic64_t *v) +static __always_inline s64 __lse_atomic64_dec_if_positive(atomic64_t *v) { unsigned long tmp; diff --git a/arch/arm64/include/asm/brk-imm.h b/arch/arm64/include/asm/brk-imm.h index ec7720dbe2c8..6e000113e508 100644 --- a/arch/arm64/include/asm/brk-imm.h +++ b/arch/arm64/include/asm/brk-imm.h @@ -17,6 +17,7 @@ * 0x401: for compile time BRK instruction * 0x800: kernel-mode BUG() and WARN() traps * 0x9xx: tag-based KASAN trap (allowed values 0x900 - 0x9ff) + * 0x8xxx: Control-Flow Integrity traps */ #define KPROBES_BRK_IMM 0x004 #define UPROBES_BRK_IMM 0x005 @@ -28,4 +29,9 @@ #define KASAN_BRK_IMM 0x900 #define KASAN_BRK_MASK 0x0ff +#define CFI_BRK_IMM_TARGET GENMASK(4, 0) +#define CFI_BRK_IMM_TYPE GENMASK(9, 5) +#define CFI_BRK_IMM_BASE 0x8000 +#define CFI_BRK_IMM_MASK (CFI_BRK_IMM_TARGET | CFI_BRK_IMM_TYPE) + #endif diff --git a/arch/arm64/include/asm/cache.h b/arch/arm64/include/asm/cache.h index 34256bda0da9..c0b178d1bb4f 100644 --- a/arch/arm64/include/asm/cache.h +++ b/arch/arm64/include/asm/cache.h @@ -45,10 +45,6 @@ static inline unsigned int arch_slab_minalign(void) #define arch_slab_minalign() arch_slab_minalign() #endif -#define CTR_CACHE_MINLINE_MASK \ - (0xf << CTR_EL0_DMINLINE_SHIFT | \ - CTR_EL0_IMINLINE_MASK << CTR_EL0_IMINLINE_SHIFT) - #define CTR_L1IP(ctr) SYS_FIELD_GET(CTR_EL0, L1Ip, ctr) #define ICACHEF_ALIASING 0 diff --git a/arch/arm64/include/asm/cpufeature.h b/arch/arm64/include/asm/cpufeature.h index fd7d75a275f6..f73f11b55042 100644 --- a/arch/arm64/include/asm/cpufeature.h +++ b/arch/arm64/include/asm/cpufeature.h @@ -6,6 +6,7 @@ #ifndef __ASM_CPUFEATURE_H #define __ASM_CPUFEATURE_H +#include <asm/alternative-macros.h> #include <asm/cpucaps.h> #include <asm/cputype.h> #include <asm/hwcap.h> @@ -419,12 +420,8 @@ static __always_inline bool is_hyp_code(void) } extern DECLARE_BITMAP(cpu_hwcaps, ARM64_NCAPS); -extern struct static_key_false cpu_hwcap_keys[ARM64_NCAPS]; -extern struct static_key_false arm64_const_caps_ready; -/* ARM64 CAPS + alternative_cb */ -#define ARM64_NPATCHABLE (ARM64_NCAPS + 1) -extern DECLARE_BITMAP(boot_capabilities, ARM64_NPATCHABLE); +extern DECLARE_BITMAP(boot_capabilities, ARM64_NCAPS); #define for_each_available_cap(cap) \ for_each_set_bit(cap, cpu_hwcaps, ARM64_NCAPS) @@ -440,7 +437,7 @@ unsigned long cpu_get_elf_hwcap2(void); static __always_inline bool system_capabilities_finalized(void) { - return static_branch_likely(&arm64_const_caps_ready); + return alternative_has_feature_likely(ARM64_ALWAYS_SYSTEM); } /* @@ -448,11 +445,11 @@ static __always_inline bool system_capabilities_finalized(void) * * Before the capability is detected, this returns false. */ -static inline bool cpus_have_cap(unsigned int num) +static __always_inline bool cpus_have_cap(unsigned int num) { if (num >= ARM64_NCAPS) return false; - return test_bit(num, cpu_hwcaps); + return arch_test_bit(num, cpu_hwcaps); } /* @@ -467,7 +464,7 @@ static __always_inline bool __cpus_have_const_cap(int num) { if (num >= ARM64_NCAPS) return false; - return static_branch_unlikely(&cpu_hwcap_keys[num]); + return alternative_has_feature_unlikely(num); } /* @@ -553,7 +550,7 @@ cpuid_feature_cap_perfmon_field(u64 features, int field, u64 cap) u64 mask = GENMASK_ULL(field + 3, field); /* Treat IMPLEMENTATION DEFINED functionality as unimplemented */ - if (val == ID_AA64DFR0_PMUVER_IMP_DEF) + if (val == ID_AA64DFR0_EL1_PMUVer_IMP_DEF) val = 0; if (val > cap) { @@ -597,43 +594,43 @@ static inline s64 arm64_ftr_value(const struct arm64_ftr_bits *ftrp, u64 val) static inline bool id_aa64mmfr0_mixed_endian_el0(u64 mmfr0) { - return cpuid_feature_extract_unsigned_field(mmfr0, ID_AA64MMFR0_BIGENDEL_SHIFT) == 0x1 || - cpuid_feature_extract_unsigned_field(mmfr0, ID_AA64MMFR0_BIGENDEL0_SHIFT) == 0x1; + return cpuid_feature_extract_unsigned_field(mmfr0, ID_AA64MMFR0_EL1_BIGEND_SHIFT) == 0x1 || + cpuid_feature_extract_unsigned_field(mmfr0, ID_AA64MMFR0_EL1_BIGENDEL0_SHIFT) == 0x1; } static inline bool id_aa64pfr0_32bit_el1(u64 pfr0) { - u32 val = cpuid_feature_extract_unsigned_field(pfr0, ID_AA64PFR0_EL1_SHIFT); + u32 val = cpuid_feature_extract_unsigned_field(pfr0, ID_AA64PFR0_EL1_EL1_SHIFT); - return val == ID_AA64PFR0_ELx_32BIT_64BIT; + return val == ID_AA64PFR0_EL1_ELx_32BIT_64BIT; } static inline bool id_aa64pfr0_32bit_el0(u64 pfr0) { - u32 val = cpuid_feature_extract_unsigned_field(pfr0, ID_AA64PFR0_EL0_SHIFT); + u32 val = cpuid_feature_extract_unsigned_field(pfr0, ID_AA64PFR0_EL1_EL0_SHIFT); - return val == ID_AA64PFR0_ELx_32BIT_64BIT; + return val == ID_AA64PFR0_EL1_ELx_32BIT_64BIT; } static inline bool id_aa64pfr0_sve(u64 pfr0) { - u32 val = cpuid_feature_extract_unsigned_field(pfr0, ID_AA64PFR0_SVE_SHIFT); + u32 val = cpuid_feature_extract_unsigned_field(pfr0, ID_AA64PFR0_EL1_SVE_SHIFT); return val > 0; } static inline bool id_aa64pfr1_sme(u64 pfr1) { - u32 val = cpuid_feature_extract_unsigned_field(pfr1, ID_AA64PFR1_SME_SHIFT); + u32 val = cpuid_feature_extract_unsigned_field(pfr1, ID_AA64PFR1_EL1_SME_SHIFT); return val > 0; } static inline bool id_aa64pfr1_mte(u64 pfr1) { - u32 val = cpuid_feature_extract_unsigned_field(pfr1, ID_AA64PFR1_MTE_SHIFT); + u32 val = cpuid_feature_extract_unsigned_field(pfr1, ID_AA64PFR1_EL1_MTE_SHIFT); - return val >= ID_AA64PFR1_MTE; + return val >= ID_AA64PFR1_EL1_MTE_MTE2; } void __init setup_cpu_features(void); @@ -659,7 +656,7 @@ static inline bool supports_csv2p3(int scope) pfr0 = read_sanitised_ftr_reg(SYS_ID_AA64PFR0_EL1); csv2_val = cpuid_feature_extract_unsigned_field(pfr0, - ID_AA64PFR0_CSV2_SHIFT); + ID_AA64PFR0_EL1_CSV2_SHIFT); return csv2_val == 3; } @@ -694,10 +691,10 @@ static inline bool system_supports_4kb_granule(void) mmfr0 = read_sanitised_ftr_reg(SYS_ID_AA64MMFR0_EL1); val = cpuid_feature_extract_unsigned_field(mmfr0, - ID_AA64MMFR0_TGRAN4_SHIFT); + ID_AA64MMFR0_EL1_TGRAN4_SHIFT); - return (val >= ID_AA64MMFR0_TGRAN4_SUPPORTED_MIN) && - (val <= ID_AA64MMFR0_TGRAN4_SUPPORTED_MAX); + return (val >= ID_AA64MMFR0_EL1_TGRAN4_SUPPORTED_MIN) && + (val <= ID_AA64MMFR0_EL1_TGRAN4_SUPPORTED_MAX); } static inline bool system_supports_64kb_granule(void) @@ -707,10 +704,10 @@ static inline bool system_supports_64kb_granule(void) mmfr0 = read_sanitised_ftr_reg(SYS_ID_AA64MMFR0_EL1); val = cpuid_feature_extract_unsigned_field(mmfr0, - ID_AA64MMFR0_TGRAN64_SHIFT); + ID_AA64MMFR0_EL1_TGRAN64_SHIFT); - return (val >= ID_AA64MMFR0_TGRAN64_SUPPORTED_MIN) && - (val <= ID_AA64MMFR0_TGRAN64_SUPPORTED_MAX); + return (val >= ID_AA64MMFR0_EL1_TGRAN64_SUPPORTED_MIN) && + (val <= ID_AA64MMFR0_EL1_TGRAN64_SUPPORTED_MAX); } static inline bool system_supports_16kb_granule(void) @@ -720,10 +717,10 @@ static inline bool system_supports_16kb_granule(void) mmfr0 = read_sanitised_ftr_reg(SYS_ID_AA64MMFR0_EL1); val = cpuid_feature_extract_unsigned_field(mmfr0, - ID_AA64MMFR0_TGRAN16_SHIFT); + ID_AA64MMFR0_EL1_TGRAN16_SHIFT); - return (val >= ID_AA64MMFR0_TGRAN16_SUPPORTED_MIN) && - (val <= ID_AA64MMFR0_TGRAN16_SUPPORTED_MAX); + return (val >= ID_AA64MMFR0_EL1_TGRAN16_SUPPORTED_MIN) && + (val <= ID_AA64MMFR0_EL1_TGRAN16_SUPPORTED_MAX); } static inline bool system_supports_mixed_endian_el0(void) @@ -738,7 +735,7 @@ static inline bool system_supports_mixed_endian(void) mmfr0 = read_sanitised_ftr_reg(SYS_ID_AA64MMFR0_EL1); val = cpuid_feature_extract_unsigned_field(mmfr0, - ID_AA64MMFR0_BIGENDEL_SHIFT); + ID_AA64MMFR0_EL1_BIGEND_SHIFT); return val == 0x1; } @@ -840,13 +837,13 @@ extern int do_emulate_mrs(struct pt_regs *regs, u32 sys_reg, u32 rt); static inline u32 id_aa64mmfr0_parange_to_phys_shift(int parange) { switch (parange) { - case ID_AA64MMFR0_PARANGE_32: return 32; - case ID_AA64MMFR0_PARANGE_36: return 36; - case ID_AA64MMFR0_PARANGE_40: return 40; - case ID_AA64MMFR0_PARANGE_42: return 42; - case ID_AA64MMFR0_PARANGE_44: return 44; - case ID_AA64MMFR0_PARANGE_48: return 48; - case ID_AA64MMFR0_PARANGE_52: return 52; + case ID_AA64MMFR0_EL1_PARANGE_32: return 32; + case ID_AA64MMFR0_EL1_PARANGE_36: return 36; + case ID_AA64MMFR0_EL1_PARANGE_40: return 40; + case ID_AA64MMFR0_EL1_PARANGE_42: return 42; + case ID_AA64MMFR0_EL1_PARANGE_44: return 44; + case ID_AA64MMFR0_EL1_PARANGE_48: return 48; + case ID_AA64MMFR0_EL1_PARANGE_52: return 52; /* * A future PE could use a value unknown to the kernel. * However, by the "D10.1.4 Principles of the ID scheme @@ -868,14 +865,14 @@ static inline bool cpu_has_hw_af(void) mmfr1 = read_cpuid(ID_AA64MMFR1_EL1); return cpuid_feature_extract_unsigned_field(mmfr1, - ID_AA64MMFR1_HADBS_SHIFT); + ID_AA64MMFR1_EL1_HAFDBS_SHIFT); } static inline bool cpu_has_pan(void) { u64 mmfr1 = read_cpuid(ID_AA64MMFR1_EL1); return cpuid_feature_extract_unsigned_field(mmfr1, - ID_AA64MMFR1_PAN_SHIFT); + ID_AA64MMFR1_EL1_PAN_SHIFT); } #ifdef CONFIG_ARM64_AMU_EXTN @@ -896,8 +893,8 @@ static inline unsigned int get_vmid_bits(u64 mmfr1) int vmid_bits; vmid_bits = cpuid_feature_extract_unsigned_field(mmfr1, - ID_AA64MMFR1_VMIDBITS_SHIFT); - if (vmid_bits == ID_AA64MMFR1_VMIDBITS_16) + ID_AA64MMFR1_EL1_VMIDBits_SHIFT); + if (vmid_bits == ID_AA64MMFR1_EL1_VMIDBits_16) return 16; /* @@ -907,6 +904,8 @@ static inline unsigned int get_vmid_bits(u64 mmfr1) return 8; } +struct arm64_ftr_reg *get_arm64_ftr_reg(u32 sys_id); + extern struct arm64_ftr_override id_aa64mmfr1_override; extern struct arm64_ftr_override id_aa64pfr0_override; extern struct arm64_ftr_override id_aa64pfr1_override; diff --git a/arch/arm64/include/asm/el2_setup.h b/arch/arm64/include/asm/el2_setup.h index 2630faa5bc08..668569adf4d3 100644 --- a/arch/arm64/include/asm/el2_setup.h +++ b/arch/arm64/include/asm/el2_setup.h @@ -40,7 +40,7 @@ .macro __init_el2_debug mrs x1, id_aa64dfr0_el1 - sbfx x0, x1, #ID_AA64DFR0_PMUVER_SHIFT, #4 + sbfx x0, x1, #ID_AA64DFR0_EL1_PMUVer_SHIFT, #4 cmp x0, #1 b.lt .Lskip_pmu_\@ // Skip if no PMU present mrs x0, pmcr_el0 // Disable debug access traps @@ -49,7 +49,7 @@ csel x2, xzr, x0, lt // all PMU counters from EL1 /* Statistical profiling */ - ubfx x0, x1, #ID_AA64DFR0_PMSVER_SHIFT, #4 + ubfx x0, x1, #ID_AA64DFR0_EL1_PMSVer_SHIFT, #4 cbz x0, .Lskip_spe_\@ // Skip if SPE not present mrs_s x0, SYS_PMBIDR_EL1 // If SPE available at EL2, @@ -65,7 +65,7 @@ .Lskip_spe_\@: /* Trace buffer */ - ubfx x0, x1, #ID_AA64DFR0_TRBE_SHIFT, #4 + ubfx x0, x1, #ID_AA64DFR0_EL1_TraceBuffer_SHIFT, #4 cbz x0, .Lskip_trace_\@ // Skip if TraceBuffer is not present mrs_s x0, SYS_TRBIDR_EL1 @@ -83,7 +83,7 @@ /* LORegions */ .macro __init_el2_lor mrs x1, id_aa64mmfr1_el1 - ubfx x0, x1, #ID_AA64MMFR1_LOR_SHIFT, 4 + ubfx x0, x1, #ID_AA64MMFR1_EL1_LO_SHIFT, 4 cbz x0, .Lskip_lor_\@ msr_s SYS_LORC_EL1, xzr .Lskip_lor_\@: @@ -97,7 +97,7 @@ /* GICv3 system register access */ .macro __init_el2_gicv3 mrs x0, id_aa64pfr0_el1 - ubfx x0, x0, #ID_AA64PFR0_GIC_SHIFT, #4 + ubfx x0, x0, #ID_AA64PFR0_EL1_GIC_SHIFT, #4 cbz x0, .Lskip_gicv3_\@ mrs_s x0, SYS_ICC_SRE_EL2 @@ -132,12 +132,12 @@ /* Disable any fine grained traps */ .macro __init_el2_fgt mrs x1, id_aa64mmfr0_el1 - ubfx x1, x1, #ID_AA64MMFR0_FGT_SHIFT, #4 + ubfx x1, x1, #ID_AA64MMFR0_EL1_FGT_SHIFT, #4 cbz x1, .Lskip_fgt_\@ mov x0, xzr mrs x1, id_aa64dfr0_el1 - ubfx x1, x1, #ID_AA64DFR0_PMSVER_SHIFT, #4 + ubfx x1, x1, #ID_AA64DFR0_EL1_PMSVer_SHIFT, #4 cmp x1, #3 b.lt .Lset_debug_fgt_\@ /* Disable PMSNEVFR_EL1 read and write traps */ @@ -149,7 +149,7 @@ mov x0, xzr mrs x1, id_aa64pfr1_el1 - ubfx x1, x1, #ID_AA64PFR1_SME_SHIFT, #4 + ubfx x1, x1, #ID_AA64PFR1_EL1_SME_SHIFT, #4 cbz x1, .Lset_fgt_\@ /* Disable nVHE traps of TPIDR2 and SMPRI */ @@ -162,7 +162,7 @@ msr_s SYS_HFGITR_EL2, xzr mrs x1, id_aa64pfr0_el1 // AMU traps UNDEF without AMU - ubfx x1, x1, #ID_AA64PFR0_AMU_SHIFT, #4 + ubfx x1, x1, #ID_AA64PFR0_EL1_AMU_SHIFT, #4 cbz x1, .Lskip_fgt_\@ msr_s SYS_HAFGRTR_EL2, xzr diff --git a/arch/arm64/include/asm/exception.h b/arch/arm64/include/asm/exception.h index d94aecff9690..19713d0f013b 100644 --- a/arch/arm64/include/asm/exception.h +++ b/arch/arm64/include/asm/exception.h @@ -58,8 +58,9 @@ asmlinkage void call_on_irq_stack(struct pt_regs *regs, asmlinkage void asm_exit_to_user_mode(struct pt_regs *regs); void do_mem_abort(unsigned long far, unsigned long esr, struct pt_regs *regs); -void do_undefinstr(struct pt_regs *regs); -void do_bti(struct pt_regs *regs); +void do_undefinstr(struct pt_regs *regs, unsigned long esr); +void do_el0_bti(struct pt_regs *regs); +void do_el1_bti(struct pt_regs *regs, unsigned long esr); void do_debug_exception(unsigned long addr_if_watchpoint, unsigned long esr, struct pt_regs *regs); void do_fpsimd_acc(unsigned long esr, struct pt_regs *regs); @@ -70,9 +71,11 @@ void do_sysinstr(unsigned long esr, struct pt_regs *regs); void do_sp_pc_abort(unsigned long addr, unsigned long esr, struct pt_regs *regs); void bad_el0_sync(struct pt_regs *regs, int reason, unsigned long esr); void do_cp15instr(unsigned long esr, struct pt_regs *regs); +int do_compat_alignment_fixup(unsigned long addr, struct pt_regs *regs); void do_el0_svc(struct pt_regs *regs); void do_el0_svc_compat(struct pt_regs *regs); -void do_ptrauth_fault(struct pt_regs *regs, unsigned long esr); +void do_el0_fpac(struct pt_regs *regs, unsigned long esr); +void do_el1_fpac(struct pt_regs *regs, unsigned long esr); void do_serror(struct pt_regs *regs, unsigned long esr); void do_notify_resume(struct pt_regs *regs, unsigned long thread_flags); diff --git a/arch/arm64/include/asm/ftrace.h b/arch/arm64/include/asm/ftrace.h index dbc45a4157fa..329dbbd4d50b 100644 --- a/arch/arm64/include/asm/ftrace.h +++ b/arch/arm64/include/asm/ftrace.h @@ -26,7 +26,7 @@ #ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS #define ARCH_SUPPORTS_FTRACE_OPS 1 #else -#define MCOUNT_ADDR ((unsigned long)function_nocfi(_mcount)) +#define MCOUNT_ADDR ((unsigned long)_mcount) #endif /* The BL at the callsite's adjusted rec->ip */ diff --git a/arch/arm64/include/asm/hw_breakpoint.h b/arch/arm64/include/asm/hw_breakpoint.h index bc7aaed4b34e..fa4c6ff3aa9b 100644 --- a/arch/arm64/include/asm/hw_breakpoint.h +++ b/arch/arm64/include/asm/hw_breakpoint.h @@ -142,7 +142,7 @@ static inline int get_num_brps(void) u64 dfr0 = read_sanitised_ftr_reg(SYS_ID_AA64DFR0_EL1); return 1 + cpuid_feature_extract_unsigned_field(dfr0, - ID_AA64DFR0_BRPS_SHIFT); + ID_AA64DFR0_EL1_BRPs_SHIFT); } /* Determine number of WRP registers available. */ @@ -151,7 +151,7 @@ static inline int get_num_wrps(void) u64 dfr0 = read_sanitised_ftr_reg(SYS_ID_AA64DFR0_EL1); return 1 + cpuid_feature_extract_unsigned_field(dfr0, - ID_AA64DFR0_WRPS_SHIFT); + ID_AA64DFR0_EL1_WRPs_SHIFT); } #endif /* __ASM_BREAKPOINT_H */ diff --git a/arch/arm64/include/asm/hwcap.h b/arch/arm64/include/asm/hwcap.h index cef4ae7a3d8b..298b386d3ebe 100644 --- a/arch/arm64/include/asm/hwcap.h +++ b/arch/arm64/include/asm/hwcap.h @@ -119,6 +119,7 @@ #define KERNEL_HWCAP_SME_FA64 __khwcap2_feature(SME_FA64) #define KERNEL_HWCAP_WFXT __khwcap2_feature(WFXT) #define KERNEL_HWCAP_EBF16 __khwcap2_feature(EBF16) +#define KERNEL_HWCAP_SVE_EBF16 __khwcap2_feature(SVE_EBF16) /* * This yields a mask that user programs can use to figure out what diff --git a/arch/arm64/include/asm/kvm_mmu.h b/arch/arm64/include/asm/kvm_mmu.h index b208da3bebec..7784081088e7 100644 --- a/arch/arm64/include/asm/kvm_mmu.h +++ b/arch/arm64/include/asm/kvm_mmu.h @@ -63,7 +63,7 @@ * specific registers encoded in the instructions). */ .macro kern_hyp_va reg -alternative_cb kvm_update_va_mask +alternative_cb ARM64_ALWAYS_SYSTEM, kvm_update_va_mask and \reg, \reg, #1 /* mask with va_mask */ ror \reg, \reg, #1 /* rotate to the first tag bit */ add \reg, \reg, #0 /* insert the low 12 bits of the tag */ @@ -97,7 +97,7 @@ alternative_cb_end hyp_pa \reg, \tmp /* Load kimage_voffset. */ -alternative_cb kvm_get_kimage_voffset +alternative_cb ARM64_ALWAYS_SYSTEM, kvm_get_kimage_voffset movz \tmp, #0 movk \tmp, #0, lsl #16 movk \tmp, #0, lsl #32 @@ -131,6 +131,7 @@ static __always_inline unsigned long __kern_hyp_va(unsigned long v) "add %0, %0, #0\n" "add %0, %0, #0, lsl 12\n" "ror %0, %0, #63\n", + ARM64_ALWAYS_SYSTEM, kvm_update_va_mask) : "+r" (v)); return v; diff --git a/arch/arm64/include/asm/kvm_pgtable.h b/arch/arm64/include/asm/kvm_pgtable.h index 9f339dffbc1a..1b098bd4cd37 100644 --- a/arch/arm64/include/asm/kvm_pgtable.h +++ b/arch/arm64/include/asm/kvm_pgtable.h @@ -16,9 +16,9 @@ static inline u64 kvm_get_parange(u64 mmfr0) { u64 parange = cpuid_feature_extract_unsigned_field(mmfr0, - ID_AA64MMFR0_PARANGE_SHIFT); - if (parange > ID_AA64MMFR0_PARANGE_MAX) - parange = ID_AA64MMFR0_PARANGE_MAX; + ID_AA64MMFR0_EL1_PARANGE_SHIFT); + if (parange > ID_AA64MMFR0_EL1_PARANGE_MAX) + parange = ID_AA64MMFR0_EL1_PARANGE_MAX; return parange; } diff --git a/arch/arm64/include/asm/linkage.h b/arch/arm64/include/asm/linkage.h index 43f8c25b3fda..1436fa1cde24 100644 --- a/arch/arm64/include/asm/linkage.h +++ b/arch/arm64/include/asm/linkage.h @@ -39,4 +39,8 @@ SYM_START(name, SYM_L_WEAK, SYM_A_NONE) \ bti c ; +#define SYM_TYPED_FUNC_START(name) \ + SYM_TYPED_START(name, SYM_L_GLOBAL, SYM_A_ALIGN) \ + bti c ; + #endif diff --git a/arch/arm64/include/asm/lse.h b/arch/arm64/include/asm/lse.h index 29c85810ae69..c503db8e73b0 100644 --- a/arch/arm64/include/asm/lse.h +++ b/arch/arm64/include/asm/lse.h @@ -13,14 +13,13 @@ #include <linux/jump_label.h> #include <linux/stringify.h> #include <asm/alternative.h> +#include <asm/alternative-macros.h> #include <asm/atomic_lse.h> #include <asm/cpucaps.h> -extern struct static_key_false cpu_hwcap_keys[ARM64_NCAPS]; - static __always_inline bool system_uses_lse_atomics(void) { - return static_branch_likely(&cpu_hwcap_keys[ARM64_HAS_LSE_ATOMICS]); + return alternative_has_feature_likely(ARM64_HAS_LSE_ATOMICS); } #define __lse_ll_sc_body(op, ...) \ diff --git a/arch/arm64/include/asm/mmu_context.h b/arch/arm64/include/asm/mmu_context.h index c7ccd82db1d2..d3f8b5df0c1f 100644 --- a/arch/arm64/include/asm/mmu_context.h +++ b/arch/arm64/include/asm/mmu_context.h @@ -147,7 +147,7 @@ static inline void cpu_install_ttbr0(phys_addr_t ttbr0, unsigned long t0sz) * Atomically replaces the active TTBR1_EL1 PGD with a new VA-compatible PGD, * avoiding the possibility of conflicting TLB entries being allocated. */ -static inline void __nocfi cpu_replace_ttbr1(pgd_t *pgdp, pgd_t *idmap) +static inline void cpu_replace_ttbr1(pgd_t *pgdp, pgd_t *idmap) { typedef void (ttbr_replace_func)(phys_addr_t); extern ttbr_replace_func idmap_cpu_replace_ttbr1; @@ -168,7 +168,7 @@ static inline void __nocfi cpu_replace_ttbr1(pgd_t *pgdp, pgd_t *idmap) ttbr1 |= TTBR_CNP_BIT; } - replace_phys = (void *)__pa_symbol(function_nocfi(idmap_cpu_replace_ttbr1)); + replace_phys = (void *)__pa_symbol(idmap_cpu_replace_ttbr1); __cpu_install_idmap(idmap); replace_phys(ttbr1); diff --git a/arch/arm64/include/asm/module.h b/arch/arm64/include/asm/module.h index 4e7fa2623896..18734fed3bdd 100644 --- a/arch/arm64/include/asm/module.h +++ b/arch/arm64/include/asm/module.h @@ -58,11 +58,20 @@ static inline bool is_forbidden_offset_for_adrp(void *place) } struct plt_entry get_plt_entry(u64 dst, void *pc); -bool plt_entries_equal(const struct plt_entry *a, const struct plt_entry *b); -static inline bool plt_entry_is_initialized(const struct plt_entry *e) +static inline const Elf_Shdr *find_section(const Elf_Ehdr *hdr, + const Elf_Shdr *sechdrs, + const char *name) { - return e->adrp || e->add || e->br; + const Elf_Shdr *s, *se; + const char *secstrs = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; + + for (s = sechdrs, se = sechdrs + hdr->e_shnum; s < se; s++) { + if (strcmp(name, secstrs + s->sh_name) == 0) + return s; + } + + return NULL; } #endif /* __ASM_MODULE_H */ diff --git a/arch/arm64/include/asm/mte.h b/arch/arm64/include/asm/mte.h index aa523591a44e..760c62f8e22f 100644 --- a/arch/arm64/include/asm/mte.h +++ b/arch/arm64/include/asm/mte.h @@ -42,7 +42,9 @@ void mte_sync_tags(pte_t old_pte, pte_t pte); void mte_copy_page_tags(void *kto, const void *kfrom); void mte_thread_init_user(void); void mte_thread_switch(struct task_struct *next); +void mte_cpu_setup(void); void mte_suspend_enter(void); +void mte_suspend_exit(void); long set_mte_ctrl(struct task_struct *task, unsigned long arg); long get_mte_ctrl(struct task_struct *task); int mte_ptrace_copy_tags(struct task_struct *child, long request, @@ -72,6 +74,9 @@ static inline void mte_thread_switch(struct task_struct *next) static inline void mte_suspend_enter(void) { } +static inline void mte_suspend_exit(void) +{ +} static inline long set_mte_ctrl(struct task_struct *task, unsigned long arg) { return 0; diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h index 86eb0bfe3b38..61883518fc50 100644 --- a/arch/arm64/include/asm/processor.h +++ b/arch/arm64/include/asm/processor.h @@ -410,7 +410,7 @@ long get_tagged_addr_ctrl(struct task_struct *task); * The top of the current task's task stack */ #define current_top_of_stack() ((unsigned long)current->stack + THREAD_SIZE) -#define on_thread_stack() (on_task_stack(current, current_stack_pointer, 1, NULL)) +#define on_thread_stack() (on_task_stack(current, current_stack_pointer, 1)) #endif /* __ASSEMBLY__ */ #endif /* __ASM_PROCESSOR_H */ diff --git a/arch/arm64/include/asm/sdei.h b/arch/arm64/include/asm/sdei.h index 7bea1d705dd6..4292d9bafb9d 100644 --- a/arch/arm64/include/asm/sdei.h +++ b/arch/arm64/include/asm/sdei.h @@ -43,22 +43,5 @@ unsigned long do_sdei_event(struct pt_regs *regs, unsigned long sdei_arch_get_entry_point(int conduit); #define sdei_arch_get_entry_point(x) sdei_arch_get_entry_point(x) -struct stack_info; - -bool _on_sdei_stack(unsigned long sp, unsigned long size, - struct stack_info *info); -static inline bool on_sdei_stack(unsigned long sp, unsigned long size, - struct stack_info *info) -{ - if (!IS_ENABLED(CONFIG_VMAP_STACK)) - return false; - if (!IS_ENABLED(CONFIG_ARM_SDE_INTERFACE)) - return false; - if (in_nmi()) - return _on_sdei_stack(sp, size, info); - - return false; -} - #endif /* __ASSEMBLY__ */ #endif /* __ASM_SDEI_H */ diff --git a/arch/arm64/include/asm/stacktrace.h b/arch/arm64/include/asm/stacktrace.h index 6ebdcdff77f5..5a0edb064ea4 100644 --- a/arch/arm64/include/asm/stacktrace.h +++ b/arch/arm64/include/asm/stacktrace.h @@ -22,39 +22,86 @@ extern void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk, DECLARE_PER_CPU(unsigned long *, irq_stack_ptr); -static inline bool on_irq_stack(unsigned long sp, unsigned long size, - struct stack_info *info) +static inline struct stack_info stackinfo_get_irq(void) { unsigned long low = (unsigned long)raw_cpu_read(irq_stack_ptr); unsigned long high = low + IRQ_STACK_SIZE; - return on_stack(sp, size, low, high, STACK_TYPE_IRQ, info); + return (struct stack_info) { + .low = low, + .high = high, + }; } -static inline bool on_task_stack(const struct task_struct *tsk, - unsigned long sp, unsigned long size, - struct stack_info *info) +static inline bool on_irq_stack(unsigned long sp, unsigned long size) +{ + struct stack_info info = stackinfo_get_irq(); + return stackinfo_on_stack(&info, sp, size); +} + +static inline struct stack_info stackinfo_get_task(const struct task_struct *tsk) { unsigned long low = (unsigned long)task_stack_page(tsk); unsigned long high = low + THREAD_SIZE; - return on_stack(sp, size, low, high, STACK_TYPE_TASK, info); + return (struct stack_info) { + .low = low, + .high = high, + }; +} + +static inline bool on_task_stack(const struct task_struct *tsk, + unsigned long sp, unsigned long size) +{ + struct stack_info info = stackinfo_get_task(tsk); + return stackinfo_on_stack(&info, sp, size); } #ifdef CONFIG_VMAP_STACK DECLARE_PER_CPU(unsigned long [OVERFLOW_STACK_SIZE/sizeof(long)], overflow_stack); -static inline bool on_overflow_stack(unsigned long sp, unsigned long size, - struct stack_info *info) +static inline struct stack_info stackinfo_get_overflow(void) { unsigned long low = (unsigned long)raw_cpu_ptr(overflow_stack); unsigned long high = low + OVERFLOW_STACK_SIZE; - return on_stack(sp, size, low, high, STACK_TYPE_OVERFLOW, info); + return (struct stack_info) { + .low = low, + .high = high, + }; +} +#else +#define stackinfo_get_overflow() stackinfo_get_unknown() +#endif + +#if defined(CONFIG_ARM_SDE_INTERFACE) && defined(CONFIG_VMAP_STACK) +DECLARE_PER_CPU(unsigned long *, sdei_stack_normal_ptr); +DECLARE_PER_CPU(unsigned long *, sdei_stack_critical_ptr); + +static inline struct stack_info stackinfo_get_sdei_normal(void) +{ + unsigned long low = (unsigned long)raw_cpu_read(sdei_stack_normal_ptr); + unsigned long high = low + SDEI_STACK_SIZE; + + return (struct stack_info) { + .low = low, + .high = high, + }; +} + +static inline struct stack_info stackinfo_get_sdei_critical(void) +{ + unsigned long low = (unsigned long)raw_cpu_read(sdei_stack_critical_ptr); + unsigned long high = low + SDEI_STACK_SIZE; + + return (struct stack_info) { + .low = low, + .high = high, + }; } #else -static inline bool on_overflow_stack(unsigned long sp, unsigned long size, - struct stack_info *info) { return false; } +#define stackinfo_get_sdei_normal() stackinfo_get_unknown() +#define stackinfo_get_sdei_critical() stackinfo_get_unknown() #endif #endif /* __ASM_STACKTRACE_H */ diff --git a/arch/arm64/include/asm/stacktrace/common.h b/arch/arm64/include/asm/stacktrace/common.h index f58eb944c46f..508f734de46e 100644 --- a/arch/arm64/include/asm/stacktrace/common.h +++ b/arch/arm64/include/asm/stacktrace/common.h @@ -2,13 +2,6 @@ /* * Common arm64 stack unwinder code. * - * To implement a new arm64 stack unwinder: - * 1) Include this header - * - * 2) Call into unwind_next_common() from your top level unwind - * function, passing it the validation and translation callbacks - * (though the later can be NULL if no translation is required). - * * See: arch/arm64/kernel/stacktrace.c for the reference implementation. * * Copyright (C) 2012 ARM Ltd. @@ -16,78 +9,60 @@ #ifndef __ASM_STACKTRACE_COMMON_H #define __ASM_STACKTRACE_COMMON_H -#include <linux/bitmap.h> -#include <linux/bitops.h> #include <linux/kprobes.h> #include <linux/types.h> -enum stack_type { - STACK_TYPE_UNKNOWN, - STACK_TYPE_TASK, - STACK_TYPE_IRQ, - STACK_TYPE_OVERFLOW, - STACK_TYPE_SDEI_NORMAL, - STACK_TYPE_SDEI_CRITICAL, - STACK_TYPE_HYP, - __NR_STACK_TYPES -}; - struct stack_info { unsigned long low; unsigned long high; - enum stack_type type; }; -/* - * A snapshot of a frame record or fp/lr register values, along with some - * accounting information necessary for robust unwinding. +/** + * struct unwind_state - state used for robust unwinding. * * @fp: The fp value in the frame record (or the real fp) * @pc: The lr value in the frame record (or the real lr) * - * @stacks_done: Stacks which have been entirely unwound, for which it is no - * longer valid to unwind to. - * - * @prev_fp: The fp that pointed to this frame record, or a synthetic value - * of 0. This is used to ensure that within a stack, each - * subsequent frame record is at an increasing address. - * @prev_type: The type of stack this frame record was on, or a synthetic - * value of STACK_TYPE_UNKNOWN. This is used to detect a - * transition from one stack to another. - * * @kr_cur: When KRETPROBES is selected, holds the kretprobe instance * associated with the most recently encountered replacement lr * value. * * @task: The task being unwound. + * + * @stack: The stack currently being unwound. + * @stacks: An array of stacks which can be unwound. + * @nr_stacks: The number of stacks in @stacks. */ struct unwind_state { unsigned long fp; unsigned long pc; - DECLARE_BITMAP(stacks_done, __NR_STACK_TYPES); - unsigned long prev_fp; - enum stack_type prev_type; #ifdef CONFIG_KRETPROBES struct llist_node *kr_cur; #endif struct task_struct *task; + + struct stack_info stack; + struct stack_info *stacks; + int nr_stacks; }; -static inline bool on_stack(unsigned long sp, unsigned long size, - unsigned long low, unsigned long high, - enum stack_type type, struct stack_info *info) +static inline struct stack_info stackinfo_get_unknown(void) +{ + return (struct stack_info) { + .low = 0, + .high = 0, + }; +} + +static inline bool stackinfo_on_stack(const struct stack_info *info, + unsigned long sp, unsigned long size) { - if (!low) + if (!info->low) return false; - if (sp < low || sp + size < sp || sp + size > high) + if (sp < info->low || sp + size < sp || sp + size > info->high) return false; - if (info) { - info->low = low; - info->high = high; - info->type = type; - } return true; } @@ -99,99 +74,101 @@ static inline void unwind_init_common(struct unwind_state *state, state->kr_cur = NULL; #endif - /* - * Prime the first unwind. - * - * In unwind_next() we'll check that the FP points to a valid stack, - * which can't be STACK_TYPE_UNKNOWN, and the first unwind will be - * treated as a transition to whichever stack that happens to be. The - * prev_fp value won't be used, but we set it to 0 such that it is - * definitely not an accessible stack address. - */ - bitmap_zero(state->stacks_done, __NR_STACK_TYPES); - state->prev_fp = 0; - state->prev_type = STACK_TYPE_UNKNOWN; + state->stack = stackinfo_get_unknown(); } -/* - * stack_trace_translate_fp_fn() - Translates a non-kernel frame pointer to - * a kernel address. - * - * @fp: the frame pointer to be updated to its kernel address. - * @type: the stack type associated with frame pointer @fp - * - * Returns true and success and @fp is updated to the corresponding - * kernel virtual address; otherwise returns false. - */ -typedef bool (*stack_trace_translate_fp_fn)(unsigned long *fp, - enum stack_type type); +static struct stack_info *unwind_find_next_stack(const struct unwind_state *state, + unsigned long sp, + unsigned long size) +{ + for (int i = 0; i < state->nr_stacks; i++) { + struct stack_info *info = &state->stacks[i]; -/* - * on_accessible_stack_fn() - Check whether a stack range is on any - * of the possible stacks. + if (stackinfo_on_stack(info, sp, size)) + return info; + } + + return NULL; +} + +/** + * unwind_consume_stack() - Check if an object is on an accessible stack, + * updating stack boundaries so that future unwind steps cannot consume this + * object again. * - * @tsk: task whose stack is being unwound - * @sp: stack address being checked - * @size: size of the stack range being checked - * @info: stack unwinding context + * @state: the current unwind state. + * @sp: the base address of the object. + * @size: the size of the object. + * + * Return: 0 upon success, an error code otherwise. */ -typedef bool (*on_accessible_stack_fn)(const struct task_struct *tsk, - unsigned long sp, unsigned long size, - struct stack_info *info); - -static inline int unwind_next_common(struct unwind_state *state, - struct stack_info *info, - on_accessible_stack_fn accessible, - stack_trace_translate_fp_fn translate_fp) +static inline int unwind_consume_stack(struct unwind_state *state, + unsigned long sp, + unsigned long size) { - unsigned long fp = state->fp, kern_fp = fp; - struct task_struct *tsk = state->task; + struct stack_info *next; - if (fp & 0x7) - return -EINVAL; + if (stackinfo_on_stack(&state->stack, sp, size)) + goto found; - if (!accessible(tsk, fp, 16, info)) - return -EINVAL; - - if (test_bit(info->type, state->stacks_done)) + next = unwind_find_next_stack(state, sp, size); + if (!next) return -EINVAL; /* - * If fp is not from the current address space perform the necessary - * translation before dereferencing it to get the next fp. - */ - if (translate_fp && !translate_fp(&kern_fp, info->type)) - return -EINVAL; - - /* - * As stacks grow downward, any valid record on the same stack must be - * at a strictly higher address than the prior record. + * Stack transitions are strictly one-way, and once we've + * transitioned from one stack to another, it's never valid to + * unwind back to the old stack. + * + * Remove the current stack from the list of stacks so that it cannot + * be found on a subsequent transition. * - * Stacks can nest in several valid orders, e.g. + * Note that stacks can nest in several valid orders, e.g. * - * TASK -> IRQ -> OVERFLOW -> SDEI_NORMAL - * TASK -> SDEI_NORMAL -> SDEI_CRITICAL -> OVERFLOW - * HYP -> OVERFLOW + * TASK -> IRQ -> OVERFLOW -> SDEI_NORMAL + * TASK -> SDEI_NORMAL -> SDEI_CRITICAL -> OVERFLOW + * HYP -> OVERFLOW * - * ... but the nesting itself is strict. Once we transition from one - * stack to another, it's never valid to unwind back to that first - * stack. + * ... so we do not check the specific order of stack + * transitions. */ - if (info->type == state->prev_type) { - if (fp <= state->prev_fp) - return -EINVAL; - } else { - __set_bit(state->prev_type, state->stacks_done); - } + state->stack = *next; + *next = stackinfo_get_unknown(); + +found: + /* + * Future unwind steps can only consume stack above this frame record. + * Update the current stack to start immediately above it. + */ + state->stack.low = sp + size; + return 0; +} + +/** + * unwind_next_frame_record() - Unwind to the next frame record. + * + * @state: the current unwind state. + * + * Return: 0 upon success, an error code otherwise. + */ +static inline int +unwind_next_frame_record(struct unwind_state *state) +{ + unsigned long fp = state->fp; + int err; + + if (fp & 0x7) + return -EINVAL; + + err = unwind_consume_stack(state, fp, 16); + if (err) + return err; /* - * Record this frame record's values and location. The prev_fp and - * prev_type are only meaningful to the next unwind_next() invocation. + * Record this frame record's values. */ - state->fp = READ_ONCE(*(unsigned long *)(kern_fp)); - state->pc = READ_ONCE(*(unsigned long *)(kern_fp + 8)); - state->prev_fp = fp; - state->prev_type = info->type; + state->fp = READ_ONCE(*(unsigned long *)(fp)); + state->pc = READ_ONCE(*(unsigned long *)(fp + 8)); return 0; } diff --git a/arch/arm64/include/asm/stacktrace/nvhe.h b/arch/arm64/include/asm/stacktrace/nvhe.h index d5527b600390..25ab83a315a7 100644 --- a/arch/arm64/include/asm/stacktrace/nvhe.h +++ b/arch/arm64/include/asm/stacktrace/nvhe.h @@ -20,8 +20,8 @@ #include <asm/stacktrace/common.h> -/* - * kvm_nvhe_unwind_init - Start an unwind from the given nVHE HYP fp and pc +/** + * kvm_nvhe_unwind_init() - Start an unwind from the given nVHE HYP fp and pc * * @state : unwind_state to initialize * @fp : frame pointer at which to start the unwinding. diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h index 4d9d3683a3df..7d301700d1a9 100644 --- a/arch/arm64/include/asm/sysreg.h +++ b/arch/arm64/include/asm/sysreg.h @@ -190,19 +190,6 @@ #define SYS_MVFR1_EL1 sys_reg(3, 0, 0, 3, 1) #define SYS_MVFR2_EL1 sys_reg(3, 0, 0, 3, 2) -#define SYS_ID_AA64PFR0_EL1 sys_reg(3, 0, 0, 4, 0) -#define SYS_ID_AA64PFR1_EL1 sys_reg(3, 0, 0, 4, 1) - -#define SYS_ID_AA64DFR0_EL1 sys_reg(3, 0, 0, 5, 0) -#define SYS_ID_AA64DFR1_EL1 sys_reg(3, 0, 0, 5, 1) - -#define SYS_ID_AA64AFR0_EL1 sys_reg(3, 0, 0, 5, 4) -#define SYS_ID_AA64AFR1_EL1 sys_reg(3, 0, 0, 5, 5) - -#define SYS_ID_AA64MMFR0_EL1 sys_reg(3, 0, 0, 7, 0) -#define SYS_ID_AA64MMFR1_EL1 sys_reg(3, 0, 0, 7, 1) -#define SYS_ID_AA64MMFR2_EL1 sys_reg(3, 0, 0, 7, 2) - #define SYS_ACTLR_EL1 sys_reg(3, 0, 1, 0, 1) #define SYS_RGSR_EL1 sys_reg(3, 0, 1, 0, 5) #define SYS_GCR_EL1 sys_reg(3, 0, 1, 0, 6) @@ -436,19 +423,11 @@ #define SYS_ICC_IGRPEN0_EL1 sys_reg(3, 0, 12, 12, 6) #define SYS_ICC_IGRPEN1_EL1 sys_reg(3, 0, 12, 12, 7) -#define SYS_TPIDR_EL1 sys_reg(3, 0, 13, 0, 4) - -#define SYS_SCXTNUM_EL1 sys_reg(3, 0, 13, 0, 7) - #define SYS_CNTKCTL_EL1 sys_reg(3, 0, 14, 1, 0) #define SYS_CCSIDR_EL1 sys_reg(3, 1, 0, 0, 0) #define SYS_AIDR_EL1 sys_reg(3, 1, 0, 0, 7) -#define SMIDR_EL1_IMPLEMENTER_SHIFT 24 -#define SMIDR_EL1_SMPS_SHIFT 15 -#define SMIDR_EL1_AFFINITY_SHIFT 0 - #define SYS_RNDR_EL0 sys_reg(3, 3, 2, 4, 0) #define SYS_RNDRRS_EL0 sys_reg(3, 3, 2, 4, 1) @@ -537,7 +516,6 @@ #define SYS_HFGWTR_EL2 sys_reg(3, 4, 1, 1, 5) #define SYS_HFGITR_EL2 sys_reg(3, 4, 1, 1, 6) #define SYS_TRFCR_EL2 sys_reg(3, 4, 1, 2, 1) -#define SYS_HCRX_EL2 sys_reg(3, 4, 1, 2, 2) #define SYS_HDFGRTR_EL2 sys_reg(3, 4, 3, 1, 4) #define SYS_HDFGWTR_EL2 sys_reg(3, 4, 3, 1, 5) #define SYS_HAFGRTR_EL2 sys_reg(3, 4, 3, 1, 6) @@ -690,164 +668,30 @@ #define MAIR_ATTRIDX(attr, idx) ((attr) << ((idx) * 8)) /* id_aa64pfr0 */ -#define ID_AA64PFR0_CSV3_SHIFT 60 -#define ID_AA64PFR0_CSV2_SHIFT 56 -#define ID_AA64PFR0_DIT_SHIFT 48 -#define ID_AA64PFR0_AMU_SHIFT 44 -#define ID_AA64PFR0_MPAM_SHIFT 40 -#define ID_AA64PFR0_SEL2_SHIFT 36 -#define ID_AA64PFR0_SVE_SHIFT 32 -#define ID_AA64PFR0_RAS_SHIFT 28 -#define ID_AA64PFR0_GIC_SHIFT 24 -#define ID_AA64PFR0_ASIMD_SHIFT 20 -#define ID_AA64PFR0_FP_SHIFT 16 -#define ID_AA64PFR0_EL3_SHIFT 12 -#define ID_AA64PFR0_EL2_SHIFT 8 -#define ID_AA64PFR0_EL1_SHIFT 4 -#define ID_AA64PFR0_EL0_SHIFT 0 - -#define ID_AA64PFR0_AMU 0x1 -#define ID_AA64PFR0_SVE 0x1 -#define ID_AA64PFR0_RAS_V1 0x1 -#define ID_AA64PFR0_RAS_V1P1 0x2 -#define ID_AA64PFR0_FP_NI 0xf -#define ID_AA64PFR0_FP_SUPPORTED 0x0 -#define ID_AA64PFR0_ASIMD_NI 0xf -#define ID_AA64PFR0_ASIMD_SUPPORTED 0x0 -#define ID_AA64PFR0_ELx_64BIT_ONLY 0x1 -#define ID_AA64PFR0_ELx_32BIT_64BIT 0x2 - -/* id_aa64pfr1 */ -#define ID_AA64PFR1_SME_SHIFT 24 -#define ID_AA64PFR1_MPAMFRAC_SHIFT 16 -#define ID_AA64PFR1_RASFRAC_SHIFT 12 -#define ID_AA64PFR1_MTE_SHIFT 8 -#define ID_AA64PFR1_SSBS_SHIFT 4 -#define ID_AA64PFR1_BT_SHIFT 0 - -#define ID_AA64PFR1_SSBS_PSTATE_NI 0 -#define ID_AA64PFR1_SSBS_PSTATE_ONLY 1 -#define ID_AA64PFR1_SSBS_PSTATE_INSNS 2 -#define ID_AA64PFR1_BT_BTI 0x1 -#define ID_AA64PFR1_SME 1 - -#define ID_AA64PFR1_MTE_NI 0x0 -#define ID_AA64PFR1_MTE_EL0 0x1 -#define ID_AA64PFR1_MTE 0x2 -#define ID_AA64PFR1_MTE_ASYMM 0x3 +#define ID_AA64PFR0_EL1_ELx_64BIT_ONLY 0x1 +#define ID_AA64PFR0_EL1_ELx_32BIT_64BIT 0x2 /* id_aa64mmfr0 */ -#define ID_AA64MMFR0_ECV_SHIFT 60 -#define ID_AA64MMFR0_FGT_SHIFT 56 -#define ID_AA64MMFR0_EXS_SHIFT 44 -#define ID_AA64MMFR0_TGRAN4_2_SHIFT 40 -#define ID_AA64MMFR0_TGRAN64_2_SHIFT 36 -#define ID_AA64MMFR0_TGRAN16_2_SHIFT 32 -#define ID_AA64MMFR0_TGRAN4_SHIFT 28 -#define ID_AA64MMFR0_TGRAN64_SHIFT 24 -#define ID_AA64MMFR0_TGRAN16_SHIFT 20 -#define ID_AA64MMFR0_BIGENDEL0_SHIFT 16 -#define ID_AA64MMFR0_SNSMEM_SHIFT 12 -#define ID_AA64MMFR0_BIGENDEL_SHIFT 8 -#define ID_AA64MMFR0_ASID_SHIFT 4 -#define ID_AA64MMFR0_PARANGE_SHIFT 0 - -#define ID_AA64MMFR0_ASID_8 0x0 -#define ID_AA64MMFR0_ASID_16 0x2 - -#define ID_AA64MMFR0_TGRAN4_NI 0xf -#define ID_AA64MMFR0_TGRAN4_SUPPORTED_MIN 0x0 -#define ID_AA64MMFR0_TGRAN4_SUPPORTED_MAX 0x7 -#define ID_AA64MMFR0_TGRAN64_NI 0xf -#define ID_AA64MMFR0_TGRAN64_SUPPORTED_MIN 0x0 -#define ID_AA64MMFR0_TGRAN64_SUPPORTED_MAX 0x7 -#define ID_AA64MMFR0_TGRAN16_NI 0x0 -#define ID_AA64MMFR0_TGRAN16_SUPPORTED_MIN 0x1 -#define ID_AA64MMFR0_TGRAN16_SUPPORTED_MAX 0xf - -#define ID_AA64MMFR0_PARANGE_32 0x0 -#define ID_AA64MMFR0_PARANGE_36 0x1 -#define ID_AA64MMFR0_PARANGE_40 0x2 -#define ID_AA64MMFR0_PARANGE_42 0x3 -#define ID_AA64MMFR0_PARANGE_44 0x4 -#define ID_AA64MMFR0_PARANGE_48 0x5 -#define ID_AA64MMFR0_PARANGE_52 0x6 +#define ID_AA64MMFR0_EL1_TGRAN4_SUPPORTED_MIN 0x0 +#define ID_AA64MMFR0_EL1_TGRAN4_SUPPORTED_MAX 0x7 +#define ID_AA64MMFR0_EL1_TGRAN64_SUPPORTED_MIN 0x0 +#define ID_AA64MMFR0_EL1_TGRAN64_SUPPORTED_MAX 0x7 +#define ID_AA64MMFR0_EL1_TGRAN16_SUPPORTED_MIN 0x1 +#define ID_AA64MMFR0_EL1_TGRAN16_SUPPORTED_MAX 0xf #define ARM64_MIN_PARANGE_BITS 32 -#define ID_AA64MMFR0_TGRAN_2_SUPPORTED_DEFAULT 0x0 -#define ID_AA64MMFR0_TGRAN_2_SUPPORTED_NONE 0x1 -#define ID_AA64MMFR0_TGRAN_2_SUPPORTED_MIN 0x2 -#define ID_AA64MMFR0_TGRAN_2_SUPPORTED_MAX 0x7 +#define ID_AA64MMFR0_EL1_TGRAN_2_SUPPORTED_DEFAULT 0x0 +#define ID_AA64MMFR0_EL1_TGRAN_2_SUPPORTED_NONE 0x1 +#define ID_AA64MMFR0_EL1_TGRAN_2_SUPPORTED_MIN 0x2 +#define ID_AA64MMFR0_EL1_TGRAN_2_SUPPORTED_MAX 0x7 #ifdef CONFIG_ARM64_PA_BITS_52 -#define ID_AA64MMFR0_PARANGE_MAX ID_AA64MMFR0_PARANGE_52 +#define ID_AA64MMFR0_EL1_PARANGE_MAX ID_AA64MMFR0_EL1_PARANGE_52 #else -#define ID_AA64MMFR0_PARANGE_MAX ID_AA64MMFR0_PARANGE_48 +#define ID_AA64MMFR0_EL1_PARANGE_MAX ID_AA64MMFR0_EL1_PARANGE_48 #endif -/* id_aa64mmfr1 */ -#define ID_AA64MMFR1_ECBHB_SHIFT 60 -#define ID_AA64MMFR1_TIDCP1_SHIFT 52 -#define ID_AA64MMFR1_HCX_SHIFT 40 -#define ID_AA64MMFR1_AFP_SHIFT 44 -#define ID_AA64MMFR1_ETS_SHIFT 36 -#define ID_AA64MMFR1_TWED_SHIFT 32 -#define ID_AA64MMFR1_XNX_SHIFT 28 -#define ID_AA64MMFR1_SPECSEI_SHIFT 24 -#define ID_AA64MMFR1_PAN_SHIFT 20 -#define ID_AA64MMFR1_LOR_SHIFT 16 -#define ID_AA64MMFR1_HPD_SHIFT 12 -#define ID_AA64MMFR1_VHE_SHIFT 8 -#define ID_AA64MMFR1_VMIDBITS_SHIFT 4 -#define ID_AA64MMFR1_HADBS_SHIFT 0 - -#define ID_AA64MMFR1_VMIDBITS_8 0 -#define ID_AA64MMFR1_VMIDBITS_16 2 - -#define ID_AA64MMFR1_TIDCP1_NI 0 -#define ID_AA64MMFR1_TIDCP1_IMP 1 - -/* id_aa64mmfr2 */ -#define ID_AA64MMFR2_E0PD_SHIFT 60 -#define ID_AA64MMFR2_EVT_SHIFT 56 -#define ID_AA64MMFR2_BBM_SHIFT 52 -#define ID_AA64MMFR2_TTL_SHIFT 48 -#define ID_AA64MMFR2_FWB_SHIFT 40 -#define ID_AA64MMFR2_IDS_SHIFT 36 -#define ID_AA64MMFR2_AT_SHIFT 32 -#define ID_AA64MMFR2_ST_SHIFT 28 -#define ID_AA64MMFR2_NV_SHIFT 24 -#define ID_AA64MMFR2_CCIDX_SHIFT 20 -#define ID_AA64MMFR2_LVA_SHIFT 16 -#define ID_AA64MMFR2_IESB_SHIFT 12 -#define ID_AA64MMFR2_LSM_SHIFT 8 -#define ID_AA64MMFR2_UAO_SHIFT 4 -#define ID_AA64MMFR2_CNP_SHIFT 0 - -/* id_aa64dfr0 */ -#define ID_AA64DFR0_MTPMU_SHIFT 48 -#define ID_AA64DFR0_TRBE_SHIFT 44 -#define ID_AA64DFR0_TRACE_FILT_SHIFT 40 -#define ID_AA64DFR0_DOUBLELOCK_SHIFT 36 -#define ID_AA64DFR0_PMSVER_SHIFT 32 -#define ID_AA64DFR0_CTX_CMPS_SHIFT 28 -#define ID_AA64DFR0_WRPS_SHIFT 20 -#define ID_AA64DFR0_BRPS_SHIFT 12 -#define ID_AA64DFR0_PMUVER_SHIFT 8 -#define ID_AA64DFR0_TRACEVER_SHIFT 4 -#define ID_AA64DFR0_DEBUGVER_SHIFT 0 - -#define ID_AA64DFR0_PMUVER_8_0 0x1 -#define ID_AA64DFR0_PMUVER_8_1 0x4 -#define ID_AA64DFR0_PMUVER_8_4 0x5 -#define ID_AA64DFR0_PMUVER_8_5 0x6 -#define ID_AA64DFR0_PMUVER_8_7 0x7 -#define ID_AA64DFR0_PMUVER_IMP_DEF 0xf - -#define ID_AA64DFR0_PMSVER_8_2 0x1 -#define ID_AA64DFR0_PMSVER_8_3 0x2 - #define ID_DFR0_PERFMON_SHIFT 24 #define ID_DFR0_PERFMON_8_0 0x3 @@ -955,20 +799,20 @@ #define ID_PFR1_PROGMOD_SHIFT 0 #if defined(CONFIG_ARM64_4K_PAGES) -#define ID_AA64MMFR0_TGRAN_SHIFT ID_AA64MMFR0_TGRAN4_SHIFT -#define ID_AA64MMFR0_TGRAN_SUPPORTED_MIN ID_AA64MMFR0_TGRAN4_SUPPORTED_MIN -#define ID_AA64MMFR0_TGRAN_SUPPORTED_MAX ID_AA64MMFR0_TGRAN4_SUPPORTED_MAX -#define ID_AA64MMFR0_TGRAN_2_SHIFT ID_AA64MMFR0_TGRAN4_2_SHIFT +#define ID_AA64MMFR0_EL1_TGRAN_SHIFT ID_AA64MMFR0_EL1_TGRAN4_SHIFT +#define ID_AA64MMFR0_EL1_TGRAN_SUPPORTED_MIN ID_AA64MMFR0_EL1_TGRAN4_SUPPORTED_MIN +#define ID_AA64MMFR0_EL1_TGRAN_SUPPORTED_MAX ID_AA64MMFR0_EL1_TGRAN4_SUPPORTED_MAX +#define ID_AA64MMFR0_EL1_TGRAN_2_SHIFT ID_AA64MMFR0_EL1_TGRAN4_2_SHIFT #elif defined(CONFIG_ARM64_16K_PAGES) -#define ID_AA64MMFR0_TGRAN_SHIFT ID_AA64MMFR0_TGRAN16_SHIFT -#define ID_AA64MMFR0_TGRAN_SUPPORTED_MIN ID_AA64MMFR0_TGRAN16_SUPPORTED_MIN -#define ID_AA64MMFR0_TGRAN_SUPPORTED_MAX ID_AA64MMFR0_TGRAN16_SUPPORTED_MAX -#define ID_AA64MMFR0_TGRAN_2_SHIFT ID_AA64MMFR0_TGRAN16_2_SHIFT +#define ID_AA64MMFR0_EL1_TGRAN_SHIFT ID_AA64MMFR0_EL1_TGRAN16_SHIFT +#define ID_AA64MMFR0_EL1_TGRAN_SUPPORTED_MIN ID_AA64MMFR0_EL1_TGRAN16_SUPPORTED_MIN +#define ID_AA64MMFR0_EL1_TGRAN_SUPPORTED_MAX ID_AA64MMFR0_EL1_TGRAN16_SUPPORTED_MAX +#define ID_AA64MMFR0_EL1_TGRAN_2_SHIFT ID_AA64MMFR0_EL1_TGRAN16_2_SHIFT #elif defined(CONFIG_ARM64_64K_PAGES) -#define ID_AA64MMFR0_TGRAN_SHIFT ID_AA64MMFR0_TGRAN64_SHIFT -#define ID_AA64MMFR0_TGRAN_SUPPORTED_MIN ID_AA64MMFR0_TGRAN64_SUPPORTED_MIN -#define ID_AA64MMFR0_TGRAN_SUPPORTED_MAX ID_AA64MMFR0_TGRAN64_SUPPORTED_MAX -#define ID_AA64MMFR0_TGRAN_2_SHIFT ID_AA64MMFR0_TGRAN64_2_SHIFT +#define ID_AA64MMFR0_EL1_TGRAN_SHIFT ID_AA64MMFR0_EL1_TGRAN64_SHIFT +#define ID_AA64MMFR0_EL1_TGRAN_SUPPORTED_MIN ID_AA64MMFR0_EL1_TGRAN64_SUPPORTED_MIN +#define ID_AA64MMFR0_EL1_TGRAN_SUPPORTED_MAX ID_AA64MMFR0_EL1_TGRAN64_SUPPORTED_MAX +#define ID_AA64MMFR0_EL1_TGRAN_2_SHIFT ID_AA64MMFR0_EL1_TGRAN64_2_SHIFT #endif #define MVFR2_FPMISC_SHIFT 4 @@ -1029,9 +873,6 @@ #define TRFCR_ELx_ExTRE BIT(1) #define TRFCR_ELx_E0TRE BIT(0) -/* HCRX_EL2 definitions */ -#define HCRX_EL2_SMPME_MASK (1 << 5) - /* GIC Hypervisor interface registers */ /* ICH_MISR_EL2 bit definitions */ #define ICH_MISR_EOI (1 << 0) diff --git a/arch/arm64/include/asm/system_misc.h b/arch/arm64/include/asm/system_misc.h index 0eb7709422e2..c34344256762 100644 --- a/arch/arm64/include/asm/system_misc.h +++ b/arch/arm64/include/asm/system_misc.h @@ -18,7 +18,7 @@ struct pt_regs; -void die(const char *msg, struct pt_regs *regs, int err); +void die(const char *msg, struct pt_regs *regs, long err); struct siginfo; void arm64_notify_die(const char *str, struct pt_regs *regs, diff --git a/arch/arm64/include/asm/uaccess.h b/arch/arm64/include/asm/uaccess.h index 2fc9f0861769..5c7b2f9d5913 100644 --- a/arch/arm64/include/asm/uaccess.h +++ b/arch/arm64/include/asm/uaccess.h @@ -203,9 +203,11 @@ static inline void uaccess_enable_privileged(void) } /* - * Sanitise a uaccess pointer such that it becomes NULL if above the maximum - * user address. In case the pointer is tagged (has the top byte set), untag - * the pointer before checking. + * Sanitize a uaccess pointer such that it cannot reach any kernel address. + * + * Clearing bit 55 ensures the pointer cannot address any portion of the TTBR1 + * address range (i.e. any kernel address), and either the pointer falls within + * the TTBR0 address range or must cause a fault. */ #define uaccess_mask_ptr(ptr) (__typeof__(ptr))__uaccess_mask_ptr(ptr) static inline void __user *__uaccess_mask_ptr(const void __user *ptr) @@ -213,14 +215,12 @@ static inline void __user *__uaccess_mask_ptr(const void __user *ptr) void __user *safe_ptr; asm volatile( - " bics xzr, %3, %2\n" - " csel %0, %1, xzr, eq\n" - : "=&r" (safe_ptr) - : "r" (ptr), "r" (TASK_SIZE_MAX - 1), - "r" (untagged_addr(ptr)) - : "cc"); - - csdb(); + " bic %0, %1, %2\n" + : "=r" (safe_ptr) + : "r" (ptr), + "i" (BIT(55)) + ); + return safe_ptr; } diff --git a/arch/arm64/include/asm/vdso.h b/arch/arm64/include/asm/vdso.h index f99dcb94b438..b4ae32109932 100644 --- a/arch/arm64/include/asm/vdso.h +++ b/arch/arm64/include/asm/vdso.h @@ -26,6 +26,9 @@ (void *)(vdso_offset_##name - VDSO_LBASE + (unsigned long)(base)); \ }) +extern char vdso_start[], vdso_end[]; +extern char vdso32_start[], vdso32_end[]; + #endif /* !__ASSEMBLY__ */ #endif /* __ASM_VDSO_H */ diff --git a/arch/arm64/include/asm/vdso/gettimeofday.h b/arch/arm64/include/asm/vdso/gettimeofday.h index 4f7a629df81f..764d13e2916c 100644 --- a/arch/arm64/include/asm/vdso/gettimeofday.h +++ b/arch/arm64/include/asm/vdso/gettimeofday.h @@ -7,8 +7,10 @@ #ifndef __ASSEMBLY__ +#include <asm/alternative.h> #include <asm/barrier.h> #include <asm/unistd.h> +#include <asm/sysreg.h> #define VDSO_HAS_CLOCK_GETRES 1 @@ -78,11 +80,20 @@ static __always_inline u64 __arch_get_hw_counter(s32 clock_mode, return 0; /* - * This isb() is required to prevent that the counter value + * If FEAT_ECV is available, use the self-synchronizing counter. + * Otherwise the isb is required to prevent that the counter value * is speculated. - */ - isb(); - asm volatile("mrs %0, cntvct_el0" : "=r" (res) :: "memory"); + */ + asm volatile( + ALTERNATIVE("isb\n" + "mrs %0, cntvct_el0", + "nop\n" + __mrs_s("%0", SYS_CNTVCTSS_EL0), + ARM64_HAS_ECV) + : "=r" (res) + : + : "memory"); + arch_counter_enforce_ordering(res); return res; diff --git a/arch/arm64/include/uapi/asm/hwcap.h b/arch/arm64/include/uapi/asm/hwcap.h index 1ad2568a2569..9b245da6f507 100644 --- a/arch/arm64/include/uapi/asm/hwcap.h +++ b/arch/arm64/include/uapi/asm/hwcap.h @@ -92,5 +92,6 @@ #define HWCAP2_SME_FA64 (1 << 30) #define HWCAP2_WFXT (1UL << 31) #define HWCAP2_EBF16 (1UL << 32) +#define HWCAP2_SVE_EBF16 (1UL << 33) #endif /* _UAPI__ASM_HWCAP_H */ diff --git a/arch/arm64/include/uapi/asm/perf_regs.h b/arch/arm64/include/uapi/asm/perf_regs.h index d54daafa89e3..86e556429e0e 100644 --- a/arch/arm64/include/uapi/asm/perf_regs.h +++ b/arch/arm64/include/uapi/asm/perf_regs.h @@ -37,5 +37,12 @@ enum perf_event_arm_regs { PERF_REG_ARM64_SP, PERF_REG_ARM64_PC, PERF_REG_ARM64_MAX, + + /* Extended/pseudo registers */ + PERF_REG_ARM64_VG = 46, /* SVE Vector Granule */ + PERF_REG_ARM64_EXTENDED_MAX }; + +#define PERF_REG_EXTENDED_MASK (1ULL << PERF_REG_ARM64_VG) + #endif /* _ASM_ARM64_PERF_REGS_H */ diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile index 1add7b01efa7..38a0b0291edb 100644 --- a/arch/arm64/kernel/Makefile +++ b/arch/arm64/kernel/Makefile @@ -45,6 +45,7 @@ $(obj)/%.stub.o: $(obj)/%.o FORCE obj-$(CONFIG_COMPAT) += sys32.o signal32.o \ sys_compat.o obj-$(CONFIG_COMPAT) += sigreturn32.o +obj-$(CONFIG_COMPAT_ALIGNMENT_FIXUPS) += compat_alignment.o obj-$(CONFIG_KUSER_HELPERS) += kuser32.o obj-$(CONFIG_FUNCTION_TRACER) += ftrace.o entry-ftrace.o obj-$(CONFIG_MODULES) += module.o diff --git a/arch/arm64/kernel/acpi_parking_protocol.c b/arch/arm64/kernel/acpi_parking_protocol.c index bfeeb5319abf..b1990e38aed0 100644 --- a/arch/arm64/kernel/acpi_parking_protocol.c +++ b/arch/arm64/kernel/acpi_parking_protocol.c @@ -99,7 +99,7 @@ static int acpi_parking_protocol_cpu_boot(unsigned int cpu) * that read this address need to convert this address to the * Boot-Loader's endianness before jumping. */ - writeq_relaxed(__pa_symbol(function_nocfi(secondary_entry)), + writeq_relaxed(__pa_symbol(secondary_entry), &mailbox->entry_point); writel_relaxed(cpu_entry->gic_cpu_id, &mailbox->cpu_id); diff --git a/arch/arm64/kernel/alternative.c b/arch/arm64/kernel/alternative.c index 9bcaa5eacf16..91263d09ea65 100644 --- a/arch/arm64/kernel/alternative.c +++ b/arch/arm64/kernel/alternative.c @@ -10,17 +10,23 @@ #include <linux/init.h> #include <linux/cpu.h> +#include <linux/elf.h> #include <asm/cacheflush.h> #include <asm/alternative.h> #include <asm/cpufeature.h> #include <asm/insn.h> +#include <asm/module.h> #include <asm/sections.h> +#include <asm/vdso.h> #include <linux/stop_machine.h> #define __ALT_PTR(a, f) ((void *)&(a)->f + (a)->f) #define ALT_ORIG_PTR(a) __ALT_PTR(a, orig_offset) #define ALT_REPL_PTR(a) __ALT_PTR(a, alt_offset) +#define ALT_CAP(a) ((a)->cpufeature & ~ARM64_CB_BIT) +#define ALT_HAS_CB(a) ((a)->cpufeature & ARM64_CB_BIT) + /* Volatile, as we may be patching the guts of READ_ONCE() */ static volatile int all_alternatives_applied; @@ -133,7 +139,8 @@ static void clean_dcache_range_nopatch(u64 start, u64 end) } while (cur += d_size, cur < end); } -static void __nocfi __apply_alternatives(struct alt_region *region, bool is_module, +static void __apply_alternatives(const struct alt_region *region, + bool is_module, unsigned long *feature_mask) { struct alt_instr *alt; @@ -142,30 +149,27 @@ static void __nocfi __apply_alternatives(struct alt_region *region, bool is_modu for (alt = region->begin; alt < region->end; alt++) { int nr_inst; + int cap = ALT_CAP(alt); - if (!test_bit(alt->cpufeature, feature_mask)) + if (!test_bit(cap, feature_mask)) continue; - /* Use ARM64_CB_PATCH as an unconditional patch */ - if (alt->cpufeature < ARM64_CB_PATCH && - !cpus_have_cap(alt->cpufeature)) + if (!cpus_have_cap(cap)) continue; - if (alt->cpufeature == ARM64_CB_PATCH) + if (ALT_HAS_CB(alt)) BUG_ON(alt->alt_len != 0); else BUG_ON(alt->alt_len != alt->orig_len); - pr_info_once("patching kernel code\n"); - origptr = ALT_ORIG_PTR(alt); updptr = is_module ? origptr : lm_alias(origptr); nr_inst = alt->orig_len / AARCH64_INSN_SIZE; - if (alt->cpufeature < ARM64_CB_PATCH) - alt_cb = patch_alternative; - else + if (ALT_HAS_CB(alt)) alt_cb = ALT_REPL_PTR(alt); + else + alt_cb = patch_alternative; alt_cb(alt, origptr, updptr, nr_inst); @@ -192,30 +196,55 @@ static void __nocfi __apply_alternatives(struct alt_region *region, bool is_modu } } +void apply_alternatives_vdso(void) +{ + struct alt_region region; + const struct elf64_hdr *hdr; + const struct elf64_shdr *shdr; + const struct elf64_shdr *alt; + DECLARE_BITMAP(all_capabilities, ARM64_NCAPS); + + bitmap_fill(all_capabilities, ARM64_NCAPS); + + hdr = (struct elf64_hdr *)vdso_start; + shdr = (void *)hdr + hdr->e_shoff; + alt = find_section(hdr, shdr, ".altinstructions"); + if (!alt) + return; + + region = (struct alt_region){ + .begin = (void *)hdr + alt->sh_offset, + .end = (void *)hdr + alt->sh_offset + alt->sh_size, + }; + + __apply_alternatives(®ion, false, &all_capabilities[0]); +} + +static const struct alt_region kernel_alternatives = { + .begin = (struct alt_instr *)__alt_instructions, + .end = (struct alt_instr *)__alt_instructions_end, +}; + /* * We might be patching the stop_machine state machine, so implement a * really simple polling protocol here. */ static int __apply_alternatives_multi_stop(void *unused) { - struct alt_region region = { - .begin = (struct alt_instr *)__alt_instructions, - .end = (struct alt_instr *)__alt_instructions_end, - }; - /* We always have a CPU 0 at this point (__init) */ if (smp_processor_id()) { while (!all_alternatives_applied) cpu_relax(); isb(); } else { - DECLARE_BITMAP(remaining_capabilities, ARM64_NPATCHABLE); + DECLARE_BITMAP(remaining_capabilities, ARM64_NCAPS); bitmap_complement(remaining_capabilities, boot_capabilities, - ARM64_NPATCHABLE); + ARM64_NCAPS); BUG_ON(all_alternatives_applied); - __apply_alternatives(®ion, false, remaining_capabilities); + __apply_alternatives(&kernel_alternatives, false, + remaining_capabilities); /* Barriers provided by the cache flushing */ all_alternatives_applied = 1; } @@ -225,6 +254,9 @@ static int __apply_alternatives_multi_stop(void *unused) void __init apply_alternatives_all(void) { + pr_info("applying system-wide alternatives\n"); + + apply_alternatives_vdso(); /* better not try code patching on a live SMP system */ stop_machine(__apply_alternatives_multi_stop, NULL, cpu_online_mask); } @@ -236,15 +268,13 @@ void __init apply_alternatives_all(void) */ void __init apply_boot_alternatives(void) { - struct alt_region region = { - .begin = (struct alt_instr *)__alt_instructions, - .end = (struct alt_instr *)__alt_instructions_end, - }; - /* If called on non-boot cpu things could go wrong */ WARN_ON(smp_processor_id() != 0); - __apply_alternatives(®ion, false, &boot_capabilities[0]); + pr_info("applying boot alternatives\n"); + + __apply_alternatives(&kernel_alternatives, false, + &boot_capabilities[0]); } #ifdef CONFIG_MODULES @@ -254,10 +284,18 @@ void apply_alternatives_module(void *start, size_t length) .begin = start, .end = start + length, }; - DECLARE_BITMAP(all_capabilities, ARM64_NPATCHABLE); + DECLARE_BITMAP(all_capabilities, ARM64_NCAPS); - bitmap_fill(all_capabilities, ARM64_NPATCHABLE); + bitmap_fill(all_capabilities, ARM64_NCAPS); __apply_alternatives(®ion, true, &all_capabilities[0]); } #endif + +noinstr void alt_cb_patch_nops(struct alt_instr *alt, __le32 *origptr, + __le32 *updptr, int nr_inst) +{ + for (int i = 0; i < nr_inst; i++) + updptr[i] = cpu_to_le32(aarch64_insn_gen_nop()); +} +EXPORT_SYMBOL(alt_cb_patch_nops); diff --git a/arch/arm64/kernel/compat_alignment.c b/arch/arm64/kernel/compat_alignment.c new file mode 100644 index 000000000000..5edec2f49ec9 --- /dev/null +++ b/arch/arm64/kernel/compat_alignment.c @@ -0,0 +1,387 @@ +// SPDX-License-Identifier: GPL-2.0-only +// based on arch/arm/mm/alignment.c + +#include <linux/compiler.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/perf_event.h> +#include <linux/uaccess.h> + +#include <asm/exception.h> +#include <asm/ptrace.h> +#include <asm/traps.h> + +/* + * 32-bit misaligned trap handler (c) 1998 San Mehat (CCC) -July 1998 + * + * Speed optimisations and better fault handling by Russell King. + */ +#define CODING_BITS(i) (i & 0x0e000000) + +#define LDST_P_BIT(i) (i & (1 << 24)) /* Preindex */ +#define LDST_U_BIT(i) (i & (1 << 23)) /* Add offset */ +#define LDST_W_BIT(i) (i & (1 << 21)) /* Writeback */ +#define LDST_L_BIT(i) (i & (1 << 20)) /* Load */ + +#define LDST_P_EQ_U(i) ((((i) ^ ((i) >> 1)) & (1 << 23)) == 0) + +#define LDSTHD_I_BIT(i) (i & (1 << 22)) /* double/half-word immed */ + +#define RN_BITS(i) ((i >> 16) & 15) /* Rn */ +#define RD_BITS(i) ((i >> 12) & 15) /* Rd */ +#define RM_BITS(i) (i & 15) /* Rm */ + +#define REGMASK_BITS(i) (i & 0xffff) + +#define BAD_INSTR 0xdeadc0de + +/* Thumb-2 32 bit format per ARMv7 DDI0406A A6.3, either f800h,e800h,f800h */ +#define IS_T32(hi16) \ + (((hi16) & 0xe000) == 0xe000 && ((hi16) & 0x1800)) + +union offset_union { + unsigned long un; + signed long sn; +}; + +#define TYPE_ERROR 0 +#define TYPE_FAULT 1 +#define TYPE_LDST 2 +#define TYPE_DONE 3 + +static void +do_alignment_finish_ldst(unsigned long addr, u32 instr, struct pt_regs *regs, + union offset_union offset) +{ + if (!LDST_U_BIT(instr)) + offset.un = -offset.un; + + if (!LDST_P_BIT(instr)) + addr += offset.un; + + if (!LDST_P_BIT(instr) || LDST_W_BIT(instr)) + regs->regs[RN_BITS(instr)] = addr; +} + +static int +do_alignment_ldrdstrd(unsigned long addr, u32 instr, struct pt_regs *regs) +{ + unsigned int rd = RD_BITS(instr); + unsigned int rd2; + int load; + + if ((instr & 0xfe000000) == 0xe8000000) { + /* ARMv7 Thumb-2 32-bit LDRD/STRD */ + rd2 = (instr >> 8) & 0xf; + load = !!(LDST_L_BIT(instr)); + } else if (((rd & 1) == 1) || (rd == 14)) { + return TYPE_ERROR; + } else { + load = ((instr & 0xf0) == 0xd0); + rd2 = rd + 1; + } + + if (load) { + unsigned int val, val2; + + if (get_user(val, (u32 __user *)addr) || + get_user(val2, (u32 __user *)(addr + 4))) + return TYPE_FAULT; + regs->regs[rd] = val; + regs->regs[rd2] = val2; + } else { + if (put_user(regs->regs[rd], (u32 __user *)addr) || + put_user(regs->regs[rd2], (u32 __user *)(addr + 4))) + return TYPE_FAULT; + } + return TYPE_LDST; +} + +/* + * LDM/STM alignment handler. + * + * There are 4 variants of this instruction: + * + * B = rn pointer before instruction, A = rn pointer after instruction + * ------ increasing address -----> + * | | r0 | r1 | ... | rx | | + * PU = 01 B A + * PU = 11 B A + * PU = 00 A B + * PU = 10 A B + */ +static int +do_alignment_ldmstm(unsigned long addr, u32 instr, struct pt_regs *regs) +{ + unsigned int rd, rn, nr_regs, regbits; + unsigned long eaddr, newaddr; + unsigned int val; + + /* count the number of registers in the mask to be transferred */ + nr_regs = hweight16(REGMASK_BITS(instr)) * 4; + + rn = RN_BITS(instr); + newaddr = eaddr = regs->regs[rn]; + + if (!LDST_U_BIT(instr)) + nr_regs = -nr_regs; + newaddr += nr_regs; + if (!LDST_U_BIT(instr)) + eaddr = newaddr; + + if (LDST_P_EQ_U(instr)) /* U = P */ + eaddr += 4; + + for (regbits = REGMASK_BITS(instr), rd = 0; regbits; + regbits >>= 1, rd += 1) + if (regbits & 1) { + if (LDST_L_BIT(instr)) { + if (get_user(val, (u32 __user *)eaddr)) + return TYPE_FAULT; + if (rd < 15) + regs->regs[rd] = val; + else + regs->pc = val; + } else { + /* + * The PC register has a bias of +8 in ARM mode + * and +4 in Thumb mode. This means that a read + * of the value of PC should account for this. + * Since Thumb does not permit STM instructions + * to refer to PC, just add 8 here. + */ + val = (rd < 15) ? regs->regs[rd] : regs->pc + 8; + if (put_user(val, (u32 __user *)eaddr)) + return TYPE_FAULT; + } + eaddr += 4; + } + + if (LDST_W_BIT(instr)) + regs->regs[rn] = newaddr; + + return TYPE_DONE; +} + +/* + * Convert Thumb multi-word load/store instruction forms to equivalent ARM + * instructions so we can reuse ARM userland alignment fault fixups for Thumb. + * + * This implementation was initially based on the algorithm found in + * gdb/sim/arm/thumbemu.c. It is basically just a code reduction of same + * to convert only Thumb ld/st instruction forms to equivalent ARM forms. + * + * NOTES: + * 1. Comments below refer to ARM ARM DDI0100E Thumb Instruction sections. + * 2. If for some reason we're passed an non-ld/st Thumb instruction to + * decode, we return 0xdeadc0de. This should never happen under normal + * circumstances but if it does, we've got other problems to deal with + * elsewhere and we obviously can't fix those problems here. + */ + +static unsigned long thumb2arm(u16 tinstr) +{ + u32 L = (tinstr & (1<<11)) >> 11; + + switch ((tinstr & 0xf800) >> 11) { + /* 6.6.1 Format 1: */ + case 0xc000 >> 11: /* 7.1.51 STMIA */ + case 0xc800 >> 11: /* 7.1.25 LDMIA */ + { + u32 Rn = (tinstr & (7<<8)) >> 8; + u32 W = ((L<<Rn) & (tinstr&255)) ? 0 : 1<<21; + + return 0xe8800000 | W | (L<<20) | (Rn<<16) | + (tinstr&255); + } + + /* 6.6.1 Format 2: */ + case 0xb000 >> 11: /* 7.1.48 PUSH */ + case 0xb800 >> 11: /* 7.1.47 POP */ + if ((tinstr & (3 << 9)) == 0x0400) { + static const u32 subset[4] = { + 0xe92d0000, /* STMDB sp!,{registers} */ + 0xe92d4000, /* STMDB sp!,{registers,lr} */ + 0xe8bd0000, /* LDMIA sp!,{registers} */ + 0xe8bd8000 /* LDMIA sp!,{registers,pc} */ + }; + return subset[(L<<1) | ((tinstr & (1<<8)) >> 8)] | + (tinstr & 255); /* register_list */ + } + fallthrough; /* for illegal instruction case */ + + default: + return BAD_INSTR; + } +} + +/* + * Convert Thumb-2 32 bit LDM, STM, LDRD, STRD to equivalent instruction + * handlable by ARM alignment handler, also find the corresponding handler, + * so that we can reuse ARM userland alignment fault fixups for Thumb. + * + * @pinstr: original Thumb-2 instruction; returns new handlable instruction + * @regs: register context. + * @poffset: return offset from faulted addr for later writeback + * + * NOTES: + * 1. Comments below refer to ARMv7 DDI0406A Thumb Instruction sections. + * 2. Register name Rt from ARMv7 is same as Rd from ARMv6 (Rd is Rt) + */ +static void * +do_alignment_t32_to_handler(u32 *pinstr, struct pt_regs *regs, + union offset_union *poffset) +{ + u32 instr = *pinstr; + u16 tinst1 = (instr >> 16) & 0xffff; + u16 tinst2 = instr & 0xffff; + + switch (tinst1 & 0xffe0) { + /* A6.3.5 Load/Store multiple */ + case 0xe880: /* STM/STMIA/STMEA,LDM/LDMIA, PUSH/POP T2 */ + case 0xe8a0: /* ...above writeback version */ + case 0xe900: /* STMDB/STMFD, LDMDB/LDMEA */ + case 0xe920: /* ...above writeback version */ + /* no need offset decision since handler calculates it */ + return do_alignment_ldmstm; + + case 0xf840: /* POP/PUSH T3 (single register) */ + if (RN_BITS(instr) == 13 && (tinst2 & 0x09ff) == 0x0904) { + u32 L = !!(LDST_L_BIT(instr)); + const u32 subset[2] = { + 0xe92d0000, /* STMDB sp!,{registers} */ + 0xe8bd0000, /* LDMIA sp!,{registers} */ + }; + *pinstr = subset[L] | (1<<RD_BITS(instr)); + return do_alignment_ldmstm; + } + /* Else fall through for illegal instruction case */ + break; + + /* A6.3.6 Load/store double, STRD/LDRD(immed, lit, reg) */ + case 0xe860: + case 0xe960: + case 0xe8e0: + case 0xe9e0: + poffset->un = (tinst2 & 0xff) << 2; + fallthrough; + + case 0xe940: + case 0xe9c0: + return do_alignment_ldrdstrd; + + /* + * No need to handle load/store instructions up to word size + * since ARMv6 and later CPUs can perform unaligned accesses. + */ + default: + break; + } + return NULL; +} + +static int alignment_get_arm(struct pt_regs *regs, __le32 __user *ip, u32 *inst) +{ + __le32 instr = 0; + int fault; + + fault = get_user(instr, ip); + if (fault) + return fault; + + *inst = __le32_to_cpu(instr); + return 0; +} + +static int alignment_get_thumb(struct pt_regs *regs, __le16 __user *ip, u16 *inst) +{ + __le16 instr = 0; + int fault; + + fault = get_user(instr, ip); + if (fault) + return fault; + + *inst = __le16_to_cpu(instr); + return 0; +} + +int do_compat_alignment_fixup(unsigned long addr, struct pt_regs *regs) +{ + union offset_union offset; + unsigned long instrptr; + int (*handler)(unsigned long addr, u32 instr, struct pt_regs *regs); + unsigned int type; + u32 instr = 0; + u16 tinstr = 0; + int isize = 4; + int thumb2_32b = 0; + int fault; + + instrptr = instruction_pointer(regs); + + if (compat_thumb_mode(regs)) { + __le16 __user *ptr = (__le16 __user *)(instrptr & ~1); + + fault = alignment_get_thumb(regs, ptr, &tinstr); + if (!fault) { + if (IS_T32(tinstr)) { + /* Thumb-2 32-bit */ + u16 tinst2; + fault = alignment_get_thumb(regs, ptr + 1, &tinst2); + instr = ((u32)tinstr << 16) | tinst2; + thumb2_32b = 1; + } else { + isize = 2; + instr = thumb2arm(tinstr); + } + } + } else { + fault = alignment_get_arm(regs, (__le32 __user *)instrptr, &instr); + } + + if (fault) + return 1; + + switch (CODING_BITS(instr)) { + case 0x00000000: /* 3.13.4 load/store instruction extensions */ + if (LDSTHD_I_BIT(instr)) + offset.un = (instr & 0xf00) >> 4 | (instr & 15); + else + offset.un = regs->regs[RM_BITS(instr)]; + + if ((instr & 0x001000f0) == 0x000000d0 || /* LDRD */ + (instr & 0x001000f0) == 0x000000f0) /* STRD */ + handler = do_alignment_ldrdstrd; + else + return 1; + break; + + case 0x08000000: /* ldm or stm, or thumb-2 32bit instruction */ + if (thumb2_32b) { + offset.un = 0; + handler = do_alignment_t32_to_handler(&instr, regs, &offset); + } else { + offset.un = 0; + handler = do_alignment_ldmstm; + } + break; + + default: + return 1; + } + + type = handler(addr, instr, regs); + + if (type == TYPE_ERROR || type == TYPE_FAULT) + return 1; + + if (type == TYPE_LDST) + do_alignment_finish_ldst(addr, instr, regs, offset); + + perf_sw_event(PERF_COUNT_SW_ALIGNMENT_FAULTS, 1, regs, regs->pc); + arm64_skip_faulting_instruction(regs, isize); + + return 0; +} diff --git a/arch/arm64/kernel/cpu-reset.S b/arch/arm64/kernel/cpu-reset.S index 48a8af97faa9..6b752fe89745 100644 --- a/arch/arm64/kernel/cpu-reset.S +++ b/arch/arm64/kernel/cpu-reset.S @@ -8,6 +8,7 @@ */ #include <linux/linkage.h> +#include <linux/cfi_types.h> #include <asm/assembler.h> #include <asm/sysreg.h> #include <asm/virt.h> @@ -28,7 +29,7 @@ * branch to what would be the reset vector. It must be executed with the * flat identity mapping. */ -SYM_CODE_START(cpu_soft_restart) +SYM_TYPED_FUNC_START(cpu_soft_restart) mov_q x12, INIT_SCTLR_EL1_MMU_OFF pre_disable_mmu_workaround /* @@ -47,6 +48,6 @@ SYM_CODE_START(cpu_soft_restart) mov x1, x3 // arg1 mov x2, x4 // arg2 br x8 -SYM_CODE_END(cpu_soft_restart) +SYM_FUNC_END(cpu_soft_restart) .popsection diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c index 53b973b6059f..58ca4f6b25d6 100644 --- a/arch/arm64/kernel/cpu_errata.c +++ b/arch/arm64/kernel/cpu_errata.c @@ -121,6 +121,22 @@ cpu_enable_cache_maint_trap(const struct arm64_cpu_capabilities *__unused) sysreg_clear_set(sctlr_el1, SCTLR_EL1_UCI, 0); } +static DEFINE_RAW_SPINLOCK(reg_user_mask_modification); +static void __maybe_unused +cpu_clear_bf16_from_user_emulation(const struct arm64_cpu_capabilities *__unused) +{ + struct arm64_ftr_reg *regp; + + regp = get_arm64_ftr_reg(SYS_ID_AA64ISAR1_EL1); + if (!regp) + return; + + raw_spin_lock(®_user_mask_modification); + if (regp->user_mask & ID_AA64ISAR1_EL1_BF16_MASK) + regp->user_mask &= ~ID_AA64ISAR1_EL1_BF16_MASK; + raw_spin_unlock(®_user_mask_modification); +} + #define CAP_MIDR_RANGE(model, v_min, r_min, v_max, r_max) \ .matches = is_affected_midr_range, \ .midr_range = MIDR_RANGE(model, v_min, r_min, v_max, r_max) @@ -692,6 +708,16 @@ const struct arm64_cpu_capabilities arm64_errata[] = { .type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM, }, #endif +#ifdef CONFIG_ARM64_ERRATUM_2658417 + { + .desc = "ARM erratum 2658417", + .capability = ARM64_WORKAROUND_2658417, + /* Cortex-A510 r0p0 - r1p1 */ + ERRATA_MIDR_RANGE(MIDR_CORTEX_A510, 0, 0, 1, 1), + MIDR_FIXED(MIDR_CPU_VAR_REV(1,1), BIT(25)), + .cpu_enable = cpu_clear_bf16_from_user_emulation, + }, +#endif { } }; diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c index af4de817d712..6062454a9067 100644 --- a/arch/arm64/kernel/cpufeature.c +++ b/arch/arm64/kernel/cpufeature.c @@ -108,8 +108,7 @@ DECLARE_BITMAP(cpu_hwcaps, ARM64_NCAPS); EXPORT_SYMBOL(cpu_hwcaps); static struct arm64_cpu_capabilities const __ro_after_init *cpu_hwcaps_ptrs[ARM64_NCAPS]; -/* Need also bit for ARM64_CB_PATCH */ -DECLARE_BITMAP(boot_capabilities, ARM64_NPATCHABLE); +DECLARE_BITMAP(boot_capabilities, ARM64_NCAPS); bool arm64_use_ng_mappings = false; EXPORT_SYMBOL(arm64_use_ng_mappings); @@ -134,31 +133,12 @@ DEFINE_STATIC_KEY_FALSE(arm64_mismatched_32bit_el0); */ static cpumask_var_t cpu_32bit_el0_mask __cpumask_var_read_mostly; -/* - * Flag to indicate if we have computed the system wide - * capabilities based on the boot time active CPUs. This - * will be used to determine if a new booting CPU should - * go through the verification process to make sure that it - * supports the system capabilities, without using a hotplug - * notifier. This is also used to decide if we could use - * the fast path for checking constant CPU caps. - */ -DEFINE_STATIC_KEY_FALSE(arm64_const_caps_ready); -EXPORT_SYMBOL(arm64_const_caps_ready); -static inline void finalize_system_capabilities(void) -{ - static_branch_enable(&arm64_const_caps_ready); -} - void dump_cpu_features(void) { /* file-wide pr_fmt adds "CPU features: " prefix */ pr_emerg("0x%*pb\n", ARM64_NCAPS, &cpu_hwcaps); } -DEFINE_STATIC_KEY_ARRAY_FALSE(cpu_hwcap_keys, ARM64_NCAPS); -EXPORT_SYMBOL(cpu_hwcap_keys); - #define __ARM64_FTR_BITS(SIGNED, VISIBLE, STRICT, TYPE, SHIFT, WIDTH, SAFE_VAL) \ { \ .sign = SIGNED, \ @@ -243,35 +223,35 @@ static const struct arm64_ftr_bits ftr_id_aa64isar2[] = { }; static const struct arm64_ftr_bits ftr_id_aa64pfr0[] = { - ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_CSV3_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_CSV2_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_DIT_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_AMU_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_MPAM_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_SEL2_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL1_CSV3_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL1_CSV2_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL1_DIT_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL1_AMU_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL1_MPAM_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL1_SEL2_SHIFT, 4, 0), ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE), - FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_SVE_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_RAS_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_GIC_SHIFT, 4, 0), - S_ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_ASIMD_SHIFT, 4, ID_AA64PFR0_ASIMD_NI), - S_ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_FP_SHIFT, 4, ID_AA64PFR0_FP_NI), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL3_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL2_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL1_SHIFT, 4, ID_AA64PFR0_ELx_64BIT_ONLY), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL0_SHIFT, 4, ID_AA64PFR0_ELx_64BIT_ONLY), + FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL1_SVE_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL1_RAS_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL1_GIC_SHIFT, 4, 0), + S_ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL1_AdvSIMD_SHIFT, 4, ID_AA64PFR0_EL1_AdvSIMD_NI), + S_ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL1_FP_SHIFT, 4, ID_AA64PFR0_EL1_FP_NI), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL1_EL3_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL1_EL2_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL1_EL1_SHIFT, 4, ID_AA64PFR0_EL1_ELx_64BIT_ONLY), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL1_EL0_SHIFT, 4, ID_AA64PFR0_EL1_ELx_64BIT_ONLY), ARM64_FTR_END, }; static const struct arm64_ftr_bits ftr_id_aa64pfr1[] = { ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SME), - FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR1_SME_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR1_MPAMFRAC_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR1_RASFRAC_SHIFT, 4, 0), + FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR1_EL1_SME_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR1_EL1_MPAM_frac_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR1_EL1_RAS_frac_SHIFT, 4, 0), ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_MTE), - FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR1_MTE_SHIFT, 4, ID_AA64PFR1_MTE_NI), - ARM64_FTR_BITS(FTR_VISIBLE, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR1_SSBS_SHIFT, 4, ID_AA64PFR1_SSBS_PSTATE_NI), + FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR1_EL1_MTE_SHIFT, 4, ID_AA64PFR1_EL1_MTE_NI), + ARM64_FTR_BITS(FTR_VISIBLE, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR1_EL1_SSBS_SHIFT, 4, ID_AA64PFR1_EL1_SSBS_NI), ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_BTI), - FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR1_BT_SHIFT, 4, 0), + FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR1_EL1_BT_SHIFT, 4, 0), ARM64_FTR_END, }; @@ -316,9 +296,9 @@ static const struct arm64_ftr_bits ftr_id_aa64smfr0[] = { }; static const struct arm64_ftr_bits ftr_id_aa64mmfr0[] = { - ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_ECV_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_FGT_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_EXS_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_EL1_ECV_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_EL1_FGT_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_EL1_EXS_SHIFT, 4, 0), /* * Page size not being supported at Stage-2 is not fatal. You * just give up KVM if PAGE_SIZE isn't supported there. Go fix @@ -334,9 +314,9 @@ static const struct arm64_ftr_bits ftr_id_aa64mmfr0[] = { * fields are inconsistent across vCPUs, then it isn't worth * trying to bring KVM up. */ - ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_EXACT, ID_AA64MMFR0_TGRAN4_2_SHIFT, 4, 1), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_EXACT, ID_AA64MMFR0_TGRAN64_2_SHIFT, 4, 1), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_EXACT, ID_AA64MMFR0_TGRAN16_2_SHIFT, 4, 1), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_EXACT, ID_AA64MMFR0_EL1_TGRAN4_2_SHIFT, 4, 1), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_EXACT, ID_AA64MMFR0_EL1_TGRAN64_2_SHIFT, 4, 1), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_EXACT, ID_AA64MMFR0_EL1_TGRAN16_2_SHIFT, 4, 1), /* * We already refuse to boot CPUs that don't support our configured * page size, so we can only detect mismatches for a page size other @@ -344,55 +324,55 @@ static const struct arm64_ftr_bits ftr_id_aa64mmfr0[] = { * exist in the wild so, even though we don't like it, we'll have to go * along with it and treat them as non-strict. */ - S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_TGRAN4_SHIFT, 4, ID_AA64MMFR0_TGRAN4_NI), - S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_TGRAN64_SHIFT, 4, ID_AA64MMFR0_TGRAN64_NI), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_TGRAN16_SHIFT, 4, ID_AA64MMFR0_TGRAN16_NI), + S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_EL1_TGRAN4_SHIFT, 4, ID_AA64MMFR0_EL1_TGRAN4_NI), + S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_EL1_TGRAN64_SHIFT, 4, ID_AA64MMFR0_EL1_TGRAN64_NI), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_EL1_TGRAN16_SHIFT, 4, ID_AA64MMFR0_EL1_TGRAN16_NI), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_BIGENDEL0_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_EL1_BIGENDEL0_SHIFT, 4, 0), /* Linux shouldn't care about secure memory */ - ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_SNSMEM_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_BIGENDEL_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_ASID_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_EL1_SNSMEM_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_EL1_BIGEND_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_EL1_ASIDBITS_SHIFT, 4, 0), /* * Differing PARange is fine as long as all peripherals and memory are mapped * within the minimum PARange of all CPUs */ - ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_PARANGE_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_EL1_PARANGE_SHIFT, 4, 0), ARM64_FTR_END, }; static const struct arm64_ftr_bits ftr_id_aa64mmfr1[] = { - ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64MMFR1_TIDCP1_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR1_AFP_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR1_ETS_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR1_TWED_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR1_XNX_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_HIGHER_SAFE, ID_AA64MMFR1_SPECSEI_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR1_PAN_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR1_LOR_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR1_HPD_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR1_VHE_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR1_VMIDBITS_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR1_HADBS_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64MMFR1_EL1_TIDCP1_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR1_EL1_AFP_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR1_EL1_ETS_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR1_EL1_TWED_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR1_EL1_XNX_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_HIGHER_SAFE, ID_AA64MMFR1_EL1_SpecSEI_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR1_EL1_PAN_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR1_EL1_LO_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR1_EL1_HPDS_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR1_EL1_VH_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR1_EL1_VMIDBits_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR1_EL1_HAFDBS_SHIFT, 4, 0), ARM64_FTR_END, }; static const struct arm64_ftr_bits ftr_id_aa64mmfr2[] = { - ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_E0PD_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_EVT_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_BBM_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_TTL_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_FWB_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_IDS_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_AT_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_ST_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_NV_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_CCIDX_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_LVA_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_IESB_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_LSM_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_UAO_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_CNP_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_EL1_E0PD_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_EL1_EVT_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_EL1_BBM_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_EL1_TTL_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_EL1_FWB_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_EL1_IDS_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_EL1_AT_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_EL1_ST_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_EL1_NV_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_EL1_CCIDX_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_EL1_VARange_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_EL1_IESB_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_EL1_LSM_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_EL1_UAO_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_EL1_CnP_SHIFT, 4, 0), ARM64_FTR_END, }; @@ -434,17 +414,17 @@ static const struct arm64_ftr_bits ftr_id_mmfr0[] = { }; static const struct arm64_ftr_bits ftr_id_aa64dfr0[] = { - S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64DFR0_DOUBLELOCK_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64DFR0_PMSVER_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64DFR0_CTX_CMPS_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64DFR0_WRPS_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64DFR0_BRPS_SHIFT, 4, 0), + S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64DFR0_EL1_DoubleLock_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64DFR0_EL1_PMSVer_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64DFR0_EL1_CTX_CMPs_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64DFR0_EL1_WRPs_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64DFR0_EL1_BRPs_SHIFT, 4, 0), /* * We can instantiate multiple PMU instances with different levels * of support. */ - S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_EXACT, ID_AA64DFR0_PMUVER_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_EXACT, ID_AA64DFR0_DEBUGVER_SHIFT, 4, 0x6), + S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_EXACT, ID_AA64DFR0_EL1_PMUVer_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_EXACT, ID_AA64DFR0_EL1_DebugVer_SHIFT, 4, 0x6), ARM64_FTR_END, }; @@ -750,7 +730,7 @@ static struct arm64_ftr_reg *get_arm64_ftr_reg_nowarn(u32 sys_id) * returns - Upon success, matching ftr_reg entry for id. * - NULL on failure but with an WARN_ON(). */ -static struct arm64_ftr_reg *get_arm64_ftr_reg(u32 sys_id) +struct arm64_ftr_reg *get_arm64_ftr_reg(u32 sys_id) { struct arm64_ftr_reg *reg; @@ -1392,6 +1372,12 @@ u64 __read_sysreg_by_encoding(u32 sys_id) #include <linux/irqchip/arm-gic-v3.h> static bool +has_always(const struct arm64_cpu_capabilities *entry, int scope) +{ + return true; +} + +static bool feature_matches(u64 reg, const struct arm64_cpu_capabilities *entry) { int val = cpuid_feature_extract_field_width(reg, entry->field_pos, @@ -1401,20 +1387,43 @@ feature_matches(u64 reg, const struct arm64_cpu_capabilities *entry) return val >= entry->min_field_value; } -static bool -has_cpuid_feature(const struct arm64_cpu_capabilities *entry, int scope) +static u64 +read_scoped_sysreg(const struct arm64_cpu_capabilities *entry, int scope) { - u64 val; - WARN_ON(scope == SCOPE_LOCAL_CPU && preemptible()); if (scope == SCOPE_SYSTEM) - val = read_sanitised_ftr_reg(entry->sys_reg); + return read_sanitised_ftr_reg(entry->sys_reg); else - val = __read_sysreg_by_encoding(entry->sys_reg); + return __read_sysreg_by_encoding(entry->sys_reg); +} + +static bool +has_user_cpuid_feature(const struct arm64_cpu_capabilities *entry, int scope) +{ + int mask; + struct arm64_ftr_reg *regp; + u64 val = read_scoped_sysreg(entry, scope); + + regp = get_arm64_ftr_reg(entry->sys_reg); + if (!regp) + return false; + + mask = cpuid_feature_extract_unsigned_field_width(regp->user_mask, + entry->field_pos, + entry->field_width); + if (!mask) + return false; return feature_matches(val, entry); } +static bool +has_cpuid_feature(const struct arm64_cpu_capabilities *entry, int scope) +{ + u64 val = read_scoped_sysreg(entry, scope); + return feature_matches(val, entry); +} + const struct cpumask *system_32bit_el0_cpumask(void) { if (!system_supports_32bit_el0()) @@ -1492,7 +1501,7 @@ static bool has_no_fpsimd(const struct arm64_cpu_capabilities *entry, int __unus u64 pfr0 = read_sanitised_ftr_reg(SYS_ID_AA64PFR0_EL1); return cpuid_feature_extract_signed_field(pfr0, - ID_AA64PFR0_FP_SHIFT) < 0; + ID_AA64PFR0_EL1_FP_SHIFT) < 0; } static bool has_cache_idc(const struct arm64_cpu_capabilities *entry, @@ -1571,7 +1580,7 @@ bool kaslr_requires_kpti(void) if (IS_ENABLED(CONFIG_ARM64_E0PD)) { u64 mmfr2 = read_sysreg_s(SYS_ID_AA64MMFR2_EL1); if (cpuid_feature_extract_unsigned_field(mmfr2, - ID_AA64MMFR2_E0PD_SHIFT)) + ID_AA64MMFR2_EL1_E0PD_SHIFT)) return false; } @@ -1685,7 +1694,7 @@ static phys_addr_t kpti_ng_pgd_alloc(int shift) return kpti_ng_temp_alloc; } -static void __nocfi +static void kpti_install_ng_mappings(const struct arm64_cpu_capabilities *__unused) { typedef void (kpti_remap_fn)(int, int, phys_addr_t, unsigned long); @@ -1713,7 +1722,7 @@ kpti_install_ng_mappings(const struct arm64_cpu_capabilities *__unused) if (arm64_use_ng_mappings) return; - remap_fn = (void *)__pa_symbol(function_nocfi(idmap_kpti_install_ng_mappings)); + remap_fn = (void *)__pa_symbol(idmap_kpti_install_ng_mappings); if (!cpu) { alloc = __get_free_pages(GFP_ATOMIC | __GFP_ZERO, order); @@ -2034,7 +2043,8 @@ static void bti_enable(const struct arm64_cpu_capabilities *__unused) static void cpu_enable_mte(struct arm64_cpu_capabilities const *cap) { sysreg_clear_set(sctlr_el1, 0, SCTLR_ELx_ATA | SCTLR_EL1_ATA0); - isb(); + + mte_cpu_setup(); /* * Clear the tags in the zero page. This needs to be done via the @@ -2088,12 +2098,22 @@ cpucap_panic_on_conflict(const struct arm64_cpu_capabilities *cap) static const struct arm64_cpu_capabilities arm64_features[] = { { + .capability = ARM64_ALWAYS_BOOT, + .type = ARM64_CPUCAP_BOOT_CPU_FEATURE, + .matches = has_always, + }, + { + .capability = ARM64_ALWAYS_SYSTEM, + .type = ARM64_CPUCAP_SYSTEM_FEATURE, + .matches = has_always, + }, + { .desc = "GIC system register CPU interface", .capability = ARM64_HAS_SYSREG_GIC_CPUIF, .type = ARM64_CPUCAP_STRICT_BOOT_CPU_FEATURE, .matches = has_useable_gicv3_cpuif, .sys_reg = SYS_ID_AA64PFR0_EL1, - .field_pos = ID_AA64PFR0_GIC_SHIFT, + .field_pos = ID_AA64PFR0_EL1_GIC_SHIFT, .field_width = 4, .sign = FTR_UNSIGNED, .min_field_value = 1, @@ -2104,7 +2124,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .type = ARM64_CPUCAP_SYSTEM_FEATURE, .matches = has_cpuid_feature, .sys_reg = SYS_ID_AA64MMFR0_EL1, - .field_pos = ID_AA64MMFR0_ECV_SHIFT, + .field_pos = ID_AA64MMFR0_EL1_ECV_SHIFT, .field_width = 4, .sign = FTR_UNSIGNED, .min_field_value = 1, @@ -2116,7 +2136,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .type = ARM64_CPUCAP_SYSTEM_FEATURE, .matches = has_cpuid_feature, .sys_reg = SYS_ID_AA64MMFR1_EL1, - .field_pos = ID_AA64MMFR1_PAN_SHIFT, + .field_pos = ID_AA64MMFR1_EL1_PAN_SHIFT, .field_width = 4, .sign = FTR_UNSIGNED, .min_field_value = 1, @@ -2130,7 +2150,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .type = ARM64_CPUCAP_SYSTEM_FEATURE, .matches = has_cpuid_feature, .sys_reg = SYS_ID_AA64MMFR1_EL1, - .field_pos = ID_AA64MMFR1_PAN_SHIFT, + .field_pos = ID_AA64MMFR1_EL1_PAN_SHIFT, .field_width = 4, .sign = FTR_UNSIGNED, .min_field_value = 3, @@ -2168,9 +2188,9 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .matches = has_32bit_el0, .sys_reg = SYS_ID_AA64PFR0_EL1, .sign = FTR_UNSIGNED, - .field_pos = ID_AA64PFR0_EL0_SHIFT, + .field_pos = ID_AA64PFR0_EL1_EL0_SHIFT, .field_width = 4, - .min_field_value = ID_AA64PFR0_ELx_32BIT_64BIT, + .min_field_value = ID_AA64PFR0_EL1_ELx_32BIT_64BIT, }, #ifdef CONFIG_KVM { @@ -2180,9 +2200,9 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .matches = has_cpuid_feature, .sys_reg = SYS_ID_AA64PFR0_EL1, .sign = FTR_UNSIGNED, - .field_pos = ID_AA64PFR0_EL1_SHIFT, + .field_pos = ID_AA64PFR0_EL1_EL1_SHIFT, .field_width = 4, - .min_field_value = ID_AA64PFR0_ELx_32BIT_64BIT, + .min_field_value = ID_AA64PFR0_EL1_ELx_32BIT_64BIT, }, { .desc = "Protected KVM", @@ -2201,7 +2221,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = { * more details. */ .sys_reg = SYS_ID_AA64PFR0_EL1, - .field_pos = ID_AA64PFR0_CSV3_SHIFT, + .field_pos = ID_AA64PFR0_EL1_CSV3_SHIFT, .field_width = 4, .min_field_value = 1, .matches = unmap_kernel_at_el0, @@ -2244,9 +2264,9 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .capability = ARM64_SVE, .sys_reg = SYS_ID_AA64PFR0_EL1, .sign = FTR_UNSIGNED, - .field_pos = ID_AA64PFR0_SVE_SHIFT, + .field_pos = ID_AA64PFR0_EL1_SVE_SHIFT, .field_width = 4, - .min_field_value = ID_AA64PFR0_SVE, + .min_field_value = ID_AA64PFR0_EL1_SVE_IMP, .matches = has_cpuid_feature, .cpu_enable = sve_kernel_enable, }, @@ -2259,9 +2279,9 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .matches = has_cpuid_feature, .sys_reg = SYS_ID_AA64PFR0_EL1, .sign = FTR_UNSIGNED, - .field_pos = ID_AA64PFR0_RAS_SHIFT, + .field_pos = ID_AA64PFR0_EL1_RAS_SHIFT, .field_width = 4, - .min_field_value = ID_AA64PFR0_RAS_V1, + .min_field_value = ID_AA64PFR0_EL1_RAS_IMP, .cpu_enable = cpu_clear_disr, }, #endif /* CONFIG_ARM64_RAS_EXTN */ @@ -2278,9 +2298,9 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .matches = has_amu, .sys_reg = SYS_ID_AA64PFR0_EL1, .sign = FTR_UNSIGNED, - .field_pos = ID_AA64PFR0_AMU_SHIFT, + .field_pos = ID_AA64PFR0_EL1_AMU_SHIFT, .field_width = 4, - .min_field_value = ID_AA64PFR0_AMU, + .min_field_value = ID_AA64PFR0_EL1_AMU_IMP, .cpu_enable = cpu_amu_enable, }, #endif /* CONFIG_ARM64_AMU_EXTN */ @@ -2303,7 +2323,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .capability = ARM64_HAS_STAGE2_FWB, .sys_reg = SYS_ID_AA64MMFR2_EL1, .sign = FTR_UNSIGNED, - .field_pos = ID_AA64MMFR2_FWB_SHIFT, + .field_pos = ID_AA64MMFR2_EL1_FWB_SHIFT, .field_width = 4, .min_field_value = 1, .matches = has_cpuid_feature, @@ -2314,7 +2334,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .capability = ARM64_HAS_ARMv8_4_TTL, .sys_reg = SYS_ID_AA64MMFR2_EL1, .sign = FTR_UNSIGNED, - .field_pos = ID_AA64MMFR2_TTL_SHIFT, + .field_pos = ID_AA64MMFR2_EL1_TTL_SHIFT, .field_width = 4, .min_field_value = 1, .matches = has_cpuid_feature, @@ -2344,7 +2364,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .capability = ARM64_HW_DBM, .sys_reg = SYS_ID_AA64MMFR1_EL1, .sign = FTR_UNSIGNED, - .field_pos = ID_AA64MMFR1_HADBS_SHIFT, + .field_pos = ID_AA64MMFR1_EL1_HAFDBS_SHIFT, .field_width = 4, .min_field_value = 2, .matches = has_hw_dbm, @@ -2367,10 +2387,10 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .type = ARM64_CPUCAP_SYSTEM_FEATURE, .matches = has_cpuid_feature, .sys_reg = SYS_ID_AA64PFR1_EL1, - .field_pos = ID_AA64PFR1_SSBS_SHIFT, + .field_pos = ID_AA64PFR1_EL1_SSBS_SHIFT, .field_width = 4, .sign = FTR_UNSIGNED, - .min_field_value = ID_AA64PFR1_SSBS_PSTATE_ONLY, + .min_field_value = ID_AA64PFR1_EL1_SSBS_IMP, }, #ifdef CONFIG_ARM64_CNP { @@ -2380,7 +2400,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .matches = has_useable_cnp, .sys_reg = SYS_ID_AA64MMFR2_EL1, .sign = FTR_UNSIGNED, - .field_pos = ID_AA64MMFR2_CNP_SHIFT, + .field_pos = ID_AA64MMFR2_EL1_CnP_SHIFT, .field_width = 4, .min_field_value = 1, .cpu_enable = cpu_enable_cnp, @@ -2485,7 +2505,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .type = ARM64_CPUCAP_STRICT_BOOT_CPU_FEATURE, .matches = can_use_gic_priorities, .sys_reg = SYS_ID_AA64PFR0_EL1, - .field_pos = ID_AA64PFR0_GIC_SHIFT, + .field_pos = ID_AA64PFR0_EL1_GIC_SHIFT, .field_width = 4, .sign = FTR_UNSIGNED, .min_field_value = 1, @@ -2499,7 +2519,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .sys_reg = SYS_ID_AA64MMFR2_EL1, .sign = FTR_UNSIGNED, .field_width = 4, - .field_pos = ID_AA64MMFR2_E0PD_SHIFT, + .field_pos = ID_AA64MMFR2_EL1_E0PD_SHIFT, .matches = has_cpuid_feature, .min_field_value = 1, .cpu_enable = cpu_enable_e0pd, @@ -2528,9 +2548,9 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .matches = has_cpuid_feature, .cpu_enable = bti_enable, .sys_reg = SYS_ID_AA64PFR1_EL1, - .field_pos = ID_AA64PFR1_BT_SHIFT, + .field_pos = ID_AA64PFR1_EL1_BT_SHIFT, .field_width = 4, - .min_field_value = ID_AA64PFR1_BT_BTI, + .min_field_value = ID_AA64PFR1_EL1_BT_IMP, .sign = FTR_UNSIGNED, }, #endif @@ -2541,9 +2561,9 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .type = ARM64_CPUCAP_STRICT_BOOT_CPU_FEATURE, .matches = has_cpuid_feature, .sys_reg = SYS_ID_AA64PFR1_EL1, - .field_pos = ID_AA64PFR1_MTE_SHIFT, + .field_pos = ID_AA64PFR1_EL1_MTE_SHIFT, .field_width = 4, - .min_field_value = ID_AA64PFR1_MTE, + .min_field_value = ID_AA64PFR1_EL1_MTE_MTE2, .sign = FTR_UNSIGNED, .cpu_enable = cpu_enable_mte, }, @@ -2553,9 +2573,9 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .type = ARM64_CPUCAP_BOOT_CPU_FEATURE, .matches = has_cpuid_feature, .sys_reg = SYS_ID_AA64PFR1_EL1, - .field_pos = ID_AA64PFR1_MTE_SHIFT, + .field_pos = ID_AA64PFR1_EL1_MTE_SHIFT, .field_width = 4, - .min_field_value = ID_AA64PFR1_MTE_ASYMM, + .min_field_value = ID_AA64PFR1_EL1_MTE_MTE3, .sign = FTR_UNSIGNED, }, #endif /* CONFIG_ARM64_MTE */ @@ -2577,9 +2597,9 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .capability = ARM64_SME, .sys_reg = SYS_ID_AA64PFR1_EL1, .sign = FTR_UNSIGNED, - .field_pos = ID_AA64PFR1_SME_SHIFT, + .field_pos = ID_AA64PFR1_EL1_SME_SHIFT, .field_width = 4, - .min_field_value = ID_AA64PFR1_SME, + .min_field_value = ID_AA64PFR1_EL1_SME_IMP, .matches = has_cpuid_feature, .cpu_enable = sme_kernel_enable, }, @@ -2614,9 +2634,9 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .type = ARM64_CPUCAP_SYSTEM_FEATURE, .sys_reg = SYS_ID_AA64MMFR1_EL1, .sign = FTR_UNSIGNED, - .field_pos = ID_AA64MMFR1_TIDCP1_SHIFT, + .field_pos = ID_AA64MMFR1_EL1_TIDCP1_SHIFT, .field_width = 4, - .min_field_value = ID_AA64MMFR1_TIDCP1_IMP, + .min_field_value = ID_AA64MMFR1_EL1_TIDCP1_IMP, .matches = has_cpuid_feature, .cpu_enable = cpu_trap_el0_impdef, }, @@ -2624,7 +2644,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = { }; #define HWCAP_CPUID_MATCH(reg, field, width, s, min_value) \ - .matches = has_cpuid_feature, \ + .matches = has_user_cpuid_feature, \ .sys_reg = reg, \ .field_pos = field, \ .field_width = width, \ @@ -2708,11 +2728,11 @@ static const struct arm64_cpu_capabilities arm64_elf_hwcaps[] = { HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_EL1_TS_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_FLAGM), HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_EL1_TS_SHIFT, 4, FTR_UNSIGNED, 2, CAP_HWCAP, KERNEL_HWCAP_FLAGM2), HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_EL1_RNDR_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_RNG), - HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_FP_SHIFT, 4, FTR_SIGNED, 0, CAP_HWCAP, KERNEL_HWCAP_FP), - HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_FP_SHIFT, 4, FTR_SIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_FPHP), - HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_ASIMD_SHIFT, 4, FTR_SIGNED, 0, CAP_HWCAP, KERNEL_HWCAP_ASIMD), - HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_ASIMD_SHIFT, 4, FTR_SIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_ASIMDHP), - HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_DIT_SHIFT, 4, FTR_SIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_DIT), + HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_EL1_FP_SHIFT, 4, FTR_SIGNED, 0, CAP_HWCAP, KERNEL_HWCAP_FP), + HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_EL1_FP_SHIFT, 4, FTR_SIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_FPHP), + HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_EL1_AdvSIMD_SHIFT, 4, FTR_SIGNED, 0, CAP_HWCAP, KERNEL_HWCAP_ASIMD), + HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_EL1_AdvSIMD_SHIFT, 4, FTR_SIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_ASIMDHP), + HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_EL1_DIT_SHIFT, 4, FTR_SIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_DIT), HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_EL1_DPB_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_DCPOP), HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_EL1_DPB_SHIFT, 4, FTR_UNSIGNED, 2, CAP_HWCAP, KERNEL_HWCAP_DCPODP), HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_EL1_JSCVT_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_JSCVT), @@ -2725,38 +2745,39 @@ static const struct arm64_cpu_capabilities arm64_elf_hwcaps[] = { HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_EL1_BF16_SHIFT, 4, FTR_UNSIGNED, 2, CAP_HWCAP, KERNEL_HWCAP_EBF16), HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_EL1_DGH_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_DGH), HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_EL1_I8MM_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_I8MM), - HWCAP_CAP(SYS_ID_AA64MMFR2_EL1, ID_AA64MMFR2_AT_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_USCAT), + HWCAP_CAP(SYS_ID_AA64MMFR2_EL1, ID_AA64MMFR2_EL1_AT_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_USCAT), #ifdef CONFIG_ARM64_SVE - HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_SVE_SHIFT, 4, FTR_UNSIGNED, ID_AA64PFR0_SVE, CAP_HWCAP, KERNEL_HWCAP_SVE), + HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_EL1_SVE_SHIFT, 4, FTR_UNSIGNED, ID_AA64PFR0_EL1_SVE_IMP, CAP_HWCAP, KERNEL_HWCAP_SVE), HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_EL1_SVEver_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_EL1_SVEver_SVE2, CAP_HWCAP, KERNEL_HWCAP_SVE2), HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_EL1_AES_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_EL1_AES_IMP, CAP_HWCAP, KERNEL_HWCAP_SVEAES), HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_EL1_AES_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_EL1_AES_PMULL128, CAP_HWCAP, KERNEL_HWCAP_SVEPMULL), HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_EL1_BitPerm_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_EL1_BitPerm_IMP, CAP_HWCAP, KERNEL_HWCAP_SVEBITPERM), HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_EL1_BF16_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_EL1_BF16_IMP, CAP_HWCAP, KERNEL_HWCAP_SVEBF16), + HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_EL1_BF16_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_EL1_BF16_EBF16, CAP_HWCAP, KERNEL_HWCAP_SVE_EBF16), HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_EL1_SHA3_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_EL1_SHA3_IMP, CAP_HWCAP, KERNEL_HWCAP_SVESHA3), HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_EL1_SM4_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_EL1_SM4_IMP, CAP_HWCAP, KERNEL_HWCAP_SVESM4), HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_EL1_I8MM_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_EL1_I8MM_IMP, CAP_HWCAP, KERNEL_HWCAP_SVEI8MM), HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_EL1_F32MM_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_EL1_F32MM_IMP, CAP_HWCAP, KERNEL_HWCAP_SVEF32MM), HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_EL1_F64MM_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_EL1_F64MM_IMP, CAP_HWCAP, KERNEL_HWCAP_SVEF64MM), #endif - HWCAP_CAP(SYS_ID_AA64PFR1_EL1, ID_AA64PFR1_SSBS_SHIFT, 4, FTR_UNSIGNED, ID_AA64PFR1_SSBS_PSTATE_INSNS, CAP_HWCAP, KERNEL_HWCAP_SSBS), + HWCAP_CAP(SYS_ID_AA64PFR1_EL1, ID_AA64PFR1_EL1_SSBS_SHIFT, 4, FTR_UNSIGNED, ID_AA64PFR1_EL1_SSBS_SSBS2, CAP_HWCAP, KERNEL_HWCAP_SSBS), #ifdef CONFIG_ARM64_BTI - HWCAP_CAP(SYS_ID_AA64PFR1_EL1, ID_AA64PFR1_BT_SHIFT, 4, FTR_UNSIGNED, ID_AA64PFR1_BT_BTI, CAP_HWCAP, KERNEL_HWCAP_BTI), + HWCAP_CAP(SYS_ID_AA64PFR1_EL1, ID_AA64PFR1_EL1_BT_SHIFT, 4, FTR_UNSIGNED, ID_AA64PFR1_EL1_BT_IMP, CAP_HWCAP, KERNEL_HWCAP_BTI), #endif #ifdef CONFIG_ARM64_PTR_AUTH HWCAP_MULTI_CAP(ptr_auth_hwcap_addr_matches, CAP_HWCAP, KERNEL_HWCAP_PACA), HWCAP_MULTI_CAP(ptr_auth_hwcap_gen_matches, CAP_HWCAP, KERNEL_HWCAP_PACG), #endif #ifdef CONFIG_ARM64_MTE - HWCAP_CAP(SYS_ID_AA64PFR1_EL1, ID_AA64PFR1_MTE_SHIFT, 4, FTR_UNSIGNED, ID_AA64PFR1_MTE, CAP_HWCAP, KERNEL_HWCAP_MTE), - HWCAP_CAP(SYS_ID_AA64PFR1_EL1, ID_AA64PFR1_MTE_SHIFT, 4, FTR_UNSIGNED, ID_AA64PFR1_MTE_ASYMM, CAP_HWCAP, KERNEL_HWCAP_MTE3), + HWCAP_CAP(SYS_ID_AA64PFR1_EL1, ID_AA64PFR1_EL1_MTE_SHIFT, 4, FTR_UNSIGNED, ID_AA64PFR1_EL1_MTE_MTE2, CAP_HWCAP, KERNEL_HWCAP_MTE), + HWCAP_CAP(SYS_ID_AA64PFR1_EL1, ID_AA64PFR1_EL1_MTE_SHIFT, 4, FTR_UNSIGNED, ID_AA64PFR1_EL1_MTE_MTE3, CAP_HWCAP, KERNEL_HWCAP_MTE3), #endif /* CONFIG_ARM64_MTE */ - HWCAP_CAP(SYS_ID_AA64MMFR0_EL1, ID_AA64MMFR0_ECV_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_ECV), - HWCAP_CAP(SYS_ID_AA64MMFR1_EL1, ID_AA64MMFR1_AFP_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_AFP), + HWCAP_CAP(SYS_ID_AA64MMFR0_EL1, ID_AA64MMFR0_EL1_ECV_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_ECV), + HWCAP_CAP(SYS_ID_AA64MMFR1_EL1, ID_AA64MMFR1_EL1_AFP_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_AFP), HWCAP_CAP(SYS_ID_AA64ISAR2_EL1, ID_AA64ISAR2_EL1_RPRES_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_RPRES), HWCAP_CAP(SYS_ID_AA64ISAR2_EL1, ID_AA64ISAR2_EL1_WFxT_SHIFT, 4, FTR_UNSIGNED, ID_AA64ISAR2_EL1_WFxT_IMP, CAP_HWCAP, KERNEL_HWCAP_WFXT), #ifdef CONFIG_ARM64_SME - HWCAP_CAP(SYS_ID_AA64PFR1_EL1, ID_AA64PFR1_SME_SHIFT, 4, FTR_UNSIGNED, ID_AA64PFR1_SME, CAP_HWCAP, KERNEL_HWCAP_SME), + HWCAP_CAP(SYS_ID_AA64PFR1_EL1, ID_AA64PFR1_EL1_SME_SHIFT, 4, FTR_UNSIGNED, ID_AA64PFR1_EL1_SME_IMP, CAP_HWCAP, KERNEL_HWCAP_SME), HWCAP_CAP(SYS_ID_AA64SMFR0_EL1, ID_AA64SMFR0_EL1_FA64_SHIFT, 1, FTR_UNSIGNED, ID_AA64SMFR0_EL1_FA64_IMP, CAP_HWCAP, KERNEL_HWCAP_SME_FA64), HWCAP_CAP(SYS_ID_AA64SMFR0_EL1, ID_AA64SMFR0_EL1_I16I64_SHIFT, 4, FTR_UNSIGNED, ID_AA64SMFR0_EL1_I16I64_IMP, CAP_HWCAP, KERNEL_HWCAP_SME_I16I64), HWCAP_CAP(SYS_ID_AA64SMFR0_EL1, ID_AA64SMFR0_EL1_F64F64_SHIFT, 1, FTR_UNSIGNED, ID_AA64SMFR0_EL1_F64F64_IMP, CAP_HWCAP, KERNEL_HWCAP_SME_F64F64), @@ -2929,9 +2950,6 @@ static void __init enable_cpu_capabilities(u16 scope_mask) if (!cpus_have_cap(num)) continue; - /* Ensure cpus_have_const_cap(num) works */ - static_branch_enable(&cpu_hwcap_keys[num]); - if (boot_scope && caps->cpu_enable) /* * Capabilities with SCOPE_BOOT_CPU scope are finalised @@ -3102,7 +3120,7 @@ static void verify_hyp_capabilities(void) /* Verify IPA range */ parange = cpuid_feature_extract_unsigned_field(mmfr0, - ID_AA64MMFR0_PARANGE_SHIFT); + ID_AA64MMFR0_EL1_PARANGE_SHIFT); ipa_max = id_aa64mmfr0_parange_to_phys_shift(parange); if (ipa_max < get_kvm_ipa_limit()) { pr_crit("CPU%d: IPA range mismatch\n", smp_processor_id()); @@ -3253,9 +3271,6 @@ void __init setup_cpu_features(void) sme_setup(); minsigstksz_setup(); - /* Advertise that we have computed the system capabilities */ - finalize_system_capabilities(); - /* * Check for sane CTR_EL0.CWG value. */ diff --git a/arch/arm64/kernel/cpuinfo.c b/arch/arm64/kernel/cpuinfo.c index d7702f39b4d3..28d4f442b0bc 100644 --- a/arch/arm64/kernel/cpuinfo.c +++ b/arch/arm64/kernel/cpuinfo.c @@ -115,6 +115,7 @@ static const char *const hwcap_str[] = { [KERNEL_HWCAP_SME_FA64] = "smefa64", [KERNEL_HWCAP_WFXT] = "wfxt", [KERNEL_HWCAP_EBF16] = "ebf16", + [KERNEL_HWCAP_SVE_EBF16] = "sveebf16", }; #ifdef CONFIG_COMPAT diff --git a/arch/arm64/kernel/debug-monitors.c b/arch/arm64/kernel/debug-monitors.c index bf9fe71589bc..3da09778267e 100644 --- a/arch/arm64/kernel/debug-monitors.c +++ b/arch/arm64/kernel/debug-monitors.c @@ -28,7 +28,7 @@ u8 debug_monitors_arch(void) { return cpuid_feature_extract_unsigned_field(read_sanitised_ftr_reg(SYS_ID_AA64DFR0_EL1), - ID_AA64DFR0_DEBUGVER_SHIFT); + ID_AA64DFR0_EL1_DebugVer_SHIFT); } /* diff --git a/arch/arm64/kernel/entry-common.c b/arch/arm64/kernel/entry-common.c index c75ca36b4a49..9173fad279af 100644 --- a/arch/arm64/kernel/entry-common.c +++ b/arch/arm64/kernel/entry-common.c @@ -379,11 +379,20 @@ static void noinstr el1_pc(struct pt_regs *regs, unsigned long esr) exit_to_kernel_mode(regs); } -static void noinstr el1_undef(struct pt_regs *regs) +static void noinstr el1_undef(struct pt_regs *regs, unsigned long esr) { enter_from_kernel_mode(regs); local_daif_inherit(regs); - do_undefinstr(regs); + do_undefinstr(regs, esr); + local_daif_mask(); + exit_to_kernel_mode(regs); +} + +static void noinstr el1_bti(struct pt_regs *regs, unsigned long esr) +{ + enter_from_kernel_mode(regs); + local_daif_inherit(regs); + do_el1_bti(regs, esr); local_daif_mask(); exit_to_kernel_mode(regs); } @@ -402,7 +411,7 @@ static void noinstr el1_fpac(struct pt_regs *regs, unsigned long esr) { enter_from_kernel_mode(regs); local_daif_inherit(regs); - do_ptrauth_fault(regs, esr); + do_el1_fpac(regs, esr); local_daif_mask(); exit_to_kernel_mode(regs); } @@ -425,7 +434,10 @@ asmlinkage void noinstr el1h_64_sync_handler(struct pt_regs *regs) break; case ESR_ELx_EC_SYS64: case ESR_ELx_EC_UNKNOWN: - el1_undef(regs); + el1_undef(regs, esr); + break; + case ESR_ELx_EC_BTI: + el1_bti(regs, esr); break; case ESR_ELx_EC_BREAKPT_CUR: case ESR_ELx_EC_SOFTSTP_CUR: @@ -582,11 +594,11 @@ static void noinstr el0_sp(struct pt_regs *regs, unsigned long esr) exit_to_user_mode(regs); } -static void noinstr el0_undef(struct pt_regs *regs) +static void noinstr el0_undef(struct pt_regs *regs, unsigned long esr) { enter_from_user_mode(regs); local_daif_restore(DAIF_PROCCTX); - do_undefinstr(regs); + do_undefinstr(regs, esr); exit_to_user_mode(regs); } @@ -594,7 +606,7 @@ static void noinstr el0_bti(struct pt_regs *regs) { enter_from_user_mode(regs); local_daif_restore(DAIF_PROCCTX); - do_bti(regs); + do_el0_bti(regs); exit_to_user_mode(regs); } @@ -629,7 +641,7 @@ static void noinstr el0_fpac(struct pt_regs *regs, unsigned long esr) { enter_from_user_mode(regs); local_daif_restore(DAIF_PROCCTX); - do_ptrauth_fault(regs, esr); + do_el0_fpac(regs, esr); exit_to_user_mode(regs); } @@ -670,7 +682,7 @@ asmlinkage void noinstr el0t_64_sync_handler(struct pt_regs *regs) el0_pc(regs, esr); break; case ESR_ELx_EC_UNKNOWN: - el0_undef(regs); + el0_undef(regs, esr); break; case ESR_ELx_EC_BTI: el0_bti(regs); @@ -788,7 +800,7 @@ asmlinkage void noinstr el0t_32_sync_handler(struct pt_regs *regs) case ESR_ELx_EC_CP14_MR: case ESR_ELx_EC_CP14_LS: case ESR_ELx_EC_CP14_64: - el0_undef(regs); + el0_undef(regs, esr); break; case ESR_ELx_EC_CP15_32: case ESR_ELx_EC_CP15_64: diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S index 2d73b3e793b2..e28137d64b76 100644 --- a/arch/arm64/kernel/entry.S +++ b/arch/arm64/kernel/entry.S @@ -114,7 +114,7 @@ * them if required. */ .macro apply_ssbd, state, tmp1, tmp2 -alternative_cb spectre_v4_patch_fw_mitigation_enable +alternative_cb ARM64_ALWAYS_SYSTEM, spectre_v4_patch_fw_mitigation_enable b .L__asm_ssbd_skip\@ // Patched to NOP alternative_cb_end ldr_this_cpu \tmp2, arm64_ssbd_callback_required, \tmp1 @@ -123,7 +123,7 @@ alternative_cb_end tbnz \tmp2, #TIF_SSBD, .L__asm_ssbd_skip\@ mov w0, #ARM_SMCCC_ARCH_WORKAROUND_2 mov w1, #\state -alternative_cb smccc_patch_fw_mitigation_conduit +alternative_cb ARM64_ALWAYS_SYSTEM, smccc_patch_fw_mitigation_conduit nop // Patched to SMC/HVC #0 alternative_cb_end .L__asm_ssbd_skip\@: @@ -175,7 +175,7 @@ alternative_else_nop_endif .macro mte_set_kernel_gcr, tmp, tmp2 #ifdef CONFIG_KASAN_HW_TAGS -alternative_cb kasan_hw_tags_enable +alternative_cb ARM64_ALWAYS_SYSTEM, kasan_hw_tags_enable b 1f alternative_cb_end mov \tmp, KERNEL_GCR_EL1 @@ -186,7 +186,7 @@ alternative_cb_end .macro mte_set_user_gcr, tsk, tmp, tmp2 #ifdef CONFIG_KASAN_HW_TAGS -alternative_cb kasan_hw_tags_enable +alternative_cb ARM64_ALWAYS_SYSTEM, kasan_hw_tags_enable b 1f alternative_cb_end ldr \tmp, [\tsk, #THREAD_MTE_CTRL] diff --git a/arch/arm64/kernel/ftrace.c b/arch/arm64/kernel/ftrace.c index ea5dc7c90f46..8745175f4a75 100644 --- a/arch/arm64/kernel/ftrace.c +++ b/arch/arm64/kernel/ftrace.c @@ -56,7 +56,7 @@ int ftrace_update_ftrace_func(ftrace_func_t func) unsigned long pc; u32 new; - pc = (unsigned long)function_nocfi(ftrace_call); + pc = (unsigned long)ftrace_call; new = aarch64_insn_gen_branch_imm(pc, (unsigned long)func, AARCH64_INSN_BRANCH_LINK); @@ -217,11 +217,26 @@ int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec, unsigned long pc = rec->ip; u32 old = 0, new; + new = aarch64_insn_gen_nop(); + + /* + * When using mcount, callsites in modules may have been initalized to + * call an arbitrary module PLT (which redirects to the _mcount stub) + * rather than the ftrace PLT we'll use at runtime (which redirects to + * the ftrace trampoline). We can ignore the old PLT when initializing + * the callsite. + * + * Note: 'mod' is only set at module load time. + */ + if (!IS_ENABLED(CONFIG_DYNAMIC_FTRACE_WITH_REGS) && + IS_ENABLED(CONFIG_ARM64_MODULE_PLTS) && mod) { + return aarch64_insn_patch_text_nosync((void *)pc, new); + } + if (!ftrace_find_callable_addr(rec, mod, &addr)) return -EINVAL; old = aarch64_insn_gen_branch_imm(pc, addr, AARCH64_INSN_BRANCH_LINK); - new = aarch64_insn_gen_nop(); return ftrace_modify_code(pc, old, new, true); } diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S index 814b6587ccb7..2196aad7b55b 100644 --- a/arch/arm64/kernel/head.S +++ b/arch/arm64/kernel/head.S @@ -99,7 +99,7 @@ SYM_CODE_START(primary_entry) */ #if VA_BITS > 48 mrs_s x0, SYS_ID_AA64MMFR2_EL1 - tst x0, #0xf << ID_AA64MMFR2_LVA_SHIFT + tst x0, #0xf << ID_AA64MMFR2_EL1_VARange_SHIFT mov x0, #VA_BITS mov x25, #VA_BITS_MIN csel x25, x25, x0, eq @@ -658,10 +658,10 @@ SYM_FUNC_END(__secondary_too_slow) */ SYM_FUNC_START(__enable_mmu) mrs x3, ID_AA64MMFR0_EL1 - ubfx x3, x3, #ID_AA64MMFR0_TGRAN_SHIFT, 4 - cmp x3, #ID_AA64MMFR0_TGRAN_SUPPORTED_MIN + ubfx x3, x3, #ID_AA64MMFR0_EL1_TGRAN_SHIFT, 4 + cmp x3, #ID_AA64MMFR0_EL1_TGRAN_SUPPORTED_MIN b.lt __no_granule_support - cmp x3, #ID_AA64MMFR0_TGRAN_SUPPORTED_MAX + cmp x3, #ID_AA64MMFR0_EL1_TGRAN_SUPPORTED_MAX b.gt __no_granule_support phys_to_ttbr x2, x2 msr ttbr0_el1, x2 // load TTBR0 @@ -679,7 +679,7 @@ SYM_FUNC_START(__cpu_secondary_check52bitva) b.ne 2f mrs_s x0, SYS_ID_AA64MMFR2_EL1 - and x0, x0, #(0xf << ID_AA64MMFR2_LVA_SHIFT) + and x0, x0, #(0xf << ID_AA64MMFR2_EL1_VARange_SHIFT) cbnz x0, 2f update_early_cpu_boot_status \ diff --git a/arch/arm64/kernel/hyp-stub.S b/arch/arm64/kernel/hyp-stub.S index 12c7fad02ae5..2ee18c860f2a 100644 --- a/arch/arm64/kernel/hyp-stub.S +++ b/arch/arm64/kernel/hyp-stub.S @@ -98,7 +98,7 @@ SYM_CODE_START_LOCAL(elx_sync) SYM_CODE_END(elx_sync) SYM_CODE_START_LOCAL(__finalise_el2) - check_override id_aa64pfr0 ID_AA64PFR0_SVE_SHIFT .Linit_sve .Lskip_sve + check_override id_aa64pfr0 ID_AA64PFR0_EL1_SVE_SHIFT .Linit_sve .Lskip_sve .Linit_sve: /* SVE register access */ mrs x0, cptr_el2 // Disable SVE traps @@ -109,7 +109,7 @@ SYM_CODE_START_LOCAL(__finalise_el2) msr_s SYS_ZCR_EL2, x1 // length for EL1. .Lskip_sve: - check_override id_aa64pfr1 ID_AA64PFR1_SME_SHIFT .Linit_sme .Lskip_sme + check_override id_aa64pfr1 ID_AA64PFR1_EL1_SME_SHIFT .Linit_sme .Lskip_sme .Linit_sme: /* SME register access and priority mapping */ mrs x0, cptr_el2 // Disable SME traps @@ -142,7 +142,7 @@ SYM_CODE_START_LOCAL(__finalise_el2) msr_s SYS_SMPRIMAP_EL2, xzr // Make all priorities equal mrs x1, id_aa64mmfr1_el1 // HCRX_EL2 present? - ubfx x1, x1, #ID_AA64MMFR1_HCX_SHIFT, #4 + ubfx x1, x1, #ID_AA64MMFR1_EL1_HCX_SHIFT, #4 cbz x1, .Lskip_sme mrs_s x1, SYS_HCRX_EL2 @@ -157,7 +157,7 @@ SYM_CODE_START_LOCAL(__finalise_el2) tbnz x1, #0, 1f // Needs to be VHE capable, obviously - check_override id_aa64mmfr1 ID_AA64MMFR1_VHE_SHIFT 2f 1f + check_override id_aa64mmfr1 ID_AA64MMFR1_EL1_VH_SHIFT 2f 1f 1: mov_q x0, HVC_STUB_ERR eret diff --git a/arch/arm64/kernel/idreg-override.c b/arch/arm64/kernel/idreg-override.c index 1b0542c69738..95133765ed29 100644 --- a/arch/arm64/kernel/idreg-override.c +++ b/arch/arm64/kernel/idreg-override.c @@ -50,7 +50,7 @@ static const struct ftr_set_desc mmfr1 __initconst = { .name = "id_aa64mmfr1", .override = &id_aa64mmfr1_override, .fields = { - FIELD("vh", ID_AA64MMFR1_VHE_SHIFT, mmfr1_vh_filter), + FIELD("vh", ID_AA64MMFR1_EL1_VH_SHIFT, mmfr1_vh_filter), {} }, }; @@ -74,7 +74,7 @@ static const struct ftr_set_desc pfr0 __initconst = { .name = "id_aa64pfr0", .override = &id_aa64pfr0_override, .fields = { - FIELD("sve", ID_AA64PFR0_SVE_SHIFT, pfr0_sve_filter), + FIELD("sve", ID_AA64PFR0_EL1_SVE_SHIFT, pfr0_sve_filter), {} }, }; @@ -98,9 +98,9 @@ static const struct ftr_set_desc pfr1 __initconst = { .name = "id_aa64pfr1", .override = &id_aa64pfr1_override, .fields = { - FIELD("bt", ID_AA64PFR1_BT_SHIFT, NULL ), - FIELD("mte", ID_AA64PFR1_MTE_SHIFT, NULL), - FIELD("sme", ID_AA64PFR1_SME_SHIFT, pfr1_sme_filter), + FIELD("bt", ID_AA64PFR1_EL1_BT_SHIFT, NULL ), + FIELD("mte", ID_AA64PFR1_EL1_MTE_SHIFT, NULL), + FIELD("sme", ID_AA64PFR1_EL1_SME_SHIFT, pfr1_sme_filter), {} }, }; diff --git a/arch/arm64/kernel/image-vars.h b/arch/arm64/kernel/image-vars.h index afa69e04e75e..4aaa5f3d1f65 100644 --- a/arch/arm64/kernel/image-vars.h +++ b/arch/arm64/kernel/image-vars.h @@ -73,6 +73,7 @@ KVM_NVHE_ALIAS(spectre_bhb_patch_loop_iter); KVM_NVHE_ALIAS(spectre_bhb_patch_loop_mitigation_enable); KVM_NVHE_ALIAS(spectre_bhb_patch_wa3); KVM_NVHE_ALIAS(spectre_bhb_patch_clearbhb); +KVM_NVHE_ALIAS(alt_cb_patch_nops); /* Global kernel state accessed by nVHE hyp code. */ KVM_NVHE_ALIAS(kvm_vgic_global_state); @@ -89,10 +90,6 @@ KVM_NVHE_ALIAS(__icache_flags); /* VMID bits set by the KVM VMID allocator */ KVM_NVHE_ALIAS(kvm_arm_vmid_bits); -/* Kernel symbols needed for cpus_have_final/const_caps checks. */ -KVM_NVHE_ALIAS(arm64_const_caps_ready); -KVM_NVHE_ALIAS(cpu_hwcap_keys); - /* Static keys which are set if a vGIC trap should be handled in hyp. */ KVM_NVHE_ALIAS(vgic_v2_cpuif_trap); KVM_NVHE_ALIAS(vgic_v3_cpuif_trap); diff --git a/arch/arm64/kernel/irq.c b/arch/arm64/kernel/irq.c index bda49430c9ea..38dbd3828f13 100644 --- a/arch/arm64/kernel/irq.c +++ b/arch/arm64/kernel/irq.c @@ -21,7 +21,9 @@ #include <linux/seq_file.h> #include <linux/vmalloc.h> #include <asm/daifflags.h> +#include <asm/exception.h> #include <asm/vmap_stack.h> +#include <asm/softirq_stack.h> /* Only access this in an NMI enter/exit */ DEFINE_PER_CPU(struct nmi_ctx, nmi_contexts); @@ -71,6 +73,18 @@ static void init_irq_stacks(void) } #endif +#ifndef CONFIG_PREEMPT_RT +static void ____do_softirq(struct pt_regs *regs) +{ + __do_softirq(); +} + +void do_softirq_own_stack(void) +{ + call_on_irq_stack(NULL, ____do_softirq); +} +#endif + static void default_handle_irq(struct pt_regs *regs) { panic("IRQ taken without a root IRQ handler\n"); diff --git a/arch/arm64/kernel/machine_kexec.c b/arch/arm64/kernel/machine_kexec.c index 19c2d487cb08..ce3d40120f72 100644 --- a/arch/arm64/kernel/machine_kexec.c +++ b/arch/arm64/kernel/machine_kexec.c @@ -204,7 +204,7 @@ void machine_kexec(struct kimage *kimage) typeof(cpu_soft_restart) *restart; cpu_install_idmap(); - restart = (void *)__pa_symbol(function_nocfi(cpu_soft_restart)); + restart = (void *)__pa_symbol(cpu_soft_restart); restart(is_hyp_nvhe(), kimage->start, kimage->arch.dtb_mem, 0, 0); } else { diff --git a/arch/arm64/kernel/module-plts.c b/arch/arm64/kernel/module-plts.c index a3d0494f25a9..5a0a8f552a61 100644 --- a/arch/arm64/kernel/module-plts.c +++ b/arch/arm64/kernel/module-plts.c @@ -37,7 +37,8 @@ struct plt_entry get_plt_entry(u64 dst, void *pc) return plt; } -bool plt_entries_equal(const struct plt_entry *a, const struct plt_entry *b) +static bool plt_entries_equal(const struct plt_entry *a, + const struct plt_entry *b) { u64 p, q; diff --git a/arch/arm64/kernel/module.c b/arch/arm64/kernel/module.c index f2d4bb14bfab..76b41e4ca9fa 100644 --- a/arch/arm64/kernel/module.c +++ b/arch/arm64/kernel/module.c @@ -476,21 +476,6 @@ overflow: return -ENOEXEC; } -static const Elf_Shdr *find_section(const Elf_Ehdr *hdr, - const Elf_Shdr *sechdrs, - const char *name) -{ - const Elf_Shdr *s, *se; - const char *secstrs = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; - - for (s = sechdrs, se = sechdrs + hdr->e_shnum; s < se; s++) { - if (strcmp(name, secstrs + s->sh_name) == 0) - return s; - } - - return NULL; -} - static inline void __init_plt(struct plt_entry *plt, unsigned long addr) { *plt = get_plt_entry(addr, plt); diff --git a/arch/arm64/kernel/mte.c b/arch/arm64/kernel/mte.c index b2b730233274..aca88470fb69 100644 --- a/arch/arm64/kernel/mte.c +++ b/arch/arm64/kernel/mte.c @@ -285,6 +285,49 @@ void mte_thread_switch(struct task_struct *next) mte_check_tfsr_el1(); } +void mte_cpu_setup(void) +{ + u64 rgsr; + + /* + * CnP must be enabled only after the MAIR_EL1 register has been set + * up. Inconsistent MAIR_EL1 between CPUs sharing the same TLB may + * lead to the wrong memory type being used for a brief window during + * CPU power-up. + * + * CnP is not a boot feature so MTE gets enabled before CnP, but let's + * make sure that is the case. + */ + BUG_ON(read_sysreg(ttbr0_el1) & TTBR_CNP_BIT); + BUG_ON(read_sysreg(ttbr1_el1) & TTBR_CNP_BIT); + + /* Normal Tagged memory type at the corresponding MAIR index */ + sysreg_clear_set(mair_el1, + MAIR_ATTRIDX(MAIR_ATTR_MASK, MT_NORMAL_TAGGED), + MAIR_ATTRIDX(MAIR_ATTR_NORMAL_TAGGED, + MT_NORMAL_TAGGED)); + + write_sysreg_s(KERNEL_GCR_EL1, SYS_GCR_EL1); + + /* + * If GCR_EL1.RRND=1 is implemented the same way as RRND=0, then + * RGSR_EL1.SEED must be non-zero for IRG to produce + * pseudorandom numbers. As RGSR_EL1 is UNKNOWN out of reset, we + * must initialize it. + */ + rgsr = (read_sysreg(CNTVCT_EL0) & SYS_RGSR_EL1_SEED_MASK) << + SYS_RGSR_EL1_SEED_SHIFT; + if (rgsr == 0) + rgsr = 1 << SYS_RGSR_EL1_SEED_SHIFT; + write_sysreg_s(rgsr, SYS_RGSR_EL1); + + /* clear any pending tag check faults in TFSR*_EL1 */ + write_sysreg_s(0, SYS_TFSR_EL1); + write_sysreg_s(0, SYS_TFSRE0_EL1); + + local_flush_tlb_all(); +} + void mte_suspend_enter(void) { if (!system_supports_mte()) @@ -301,6 +344,14 @@ void mte_suspend_enter(void) mte_check_tfsr_el1(); } +void mte_suspend_exit(void) +{ + if (!system_supports_mte()) + return; + + mte_cpu_setup(); +} + long set_mte_ctrl(struct task_struct *task, unsigned long arg) { u64 mte_ctrl = (~((arg & PR_MTE_TAG_MASK) >> PR_MTE_TAG_SHIFT) & diff --git a/arch/arm64/kernel/perf_event.c b/arch/arm64/kernel/perf_event.c index cb69ff1e6138..7b0643fe2f13 100644 --- a/arch/arm64/kernel/perf_event.c +++ b/arch/arm64/kernel/perf_event.c @@ -390,7 +390,7 @@ static const struct attribute_group armv8_pmuv3_caps_attr_group = { */ static bool armv8pmu_has_long_event(struct arm_pmu *cpu_pmu) { - return (cpu_pmu->pmuver >= ID_AA64DFR0_PMUVER_8_5); + return (cpu_pmu->pmuver >= ID_AA64DFR0_EL1_PMUVer_V3P5); } static inline bool armv8pmu_event_has_user_read(struct perf_event *event) @@ -1145,8 +1145,8 @@ static void __armv8pmu_probe_pmu(void *info) dfr0 = read_sysreg(id_aa64dfr0_el1); pmuver = cpuid_feature_extract_unsigned_field(dfr0, - ID_AA64DFR0_PMUVER_SHIFT); - if (pmuver == ID_AA64DFR0_PMUVER_IMP_DEF || pmuver == 0) + ID_AA64DFR0_EL1_PMUVer_SHIFT); + if (pmuver == ID_AA64DFR0_EL1_PMUVer_IMP_DEF || pmuver == 0) return; cpu_pmu->pmuver = pmuver; @@ -1172,7 +1172,7 @@ static void __armv8pmu_probe_pmu(void *info) pmceid, ARMV8_PMUV3_MAX_COMMON_EVENTS); /* store PMMIR_EL1 register for sysfs */ - if (pmuver >= ID_AA64DFR0_PMUVER_8_4 && (pmceid_raw[1] & BIT(31))) + if (pmuver >= ID_AA64DFR0_EL1_PMUVer_V3P4 && (pmceid_raw[1] & BIT(31))) cpu_pmu->reg_pmmir = read_cpuid(PMMIR_EL1); else cpu_pmu->reg_pmmir = 0; diff --git a/arch/arm64/kernel/perf_regs.c b/arch/arm64/kernel/perf_regs.c index f6f58e6265df..b4eece3eb17d 100644 --- a/arch/arm64/kernel/perf_regs.c +++ b/arch/arm64/kernel/perf_regs.c @@ -9,9 +9,27 @@ #include <asm/perf_regs.h> #include <asm/ptrace.h> +static u64 perf_ext_regs_value(int idx) +{ + switch (idx) { + case PERF_REG_ARM64_VG: + if (WARN_ON_ONCE(!system_supports_sve())) + return 0; + + /* + * Vector granule is current length in bits of SVE registers + * divided by 64. + */ + return (task_get_sve_vl(current) * 8) / 64; + default: + WARN_ON_ONCE(true); + return 0; + } +} + u64 perf_reg_value(struct pt_regs *regs, int idx) { - if (WARN_ON_ONCE((u32)idx >= PERF_REG_ARM64_MAX)) + if (WARN_ON_ONCE((u32)idx >= PERF_REG_ARM64_EXTENDED_MAX)) return 0; /* @@ -51,6 +69,9 @@ u64 perf_reg_value(struct pt_regs *regs, int idx) if ((u32)idx == PERF_REG_ARM64_PC) return regs->pc; + if ((u32)idx >= PERF_REG_ARM64_MAX) + return perf_ext_regs_value(idx); + return regs->regs[idx]; } @@ -58,7 +79,12 @@ u64 perf_reg_value(struct pt_regs *regs, int idx) int perf_reg_validate(u64 mask) { - if (!mask || mask & REG_RESERVED) + u64 reserved_mask = REG_RESERVED; + + if (system_supports_sve()) + reserved_mask &= ~(1ULL << PERF_REG_ARM64_VG); + + if (!mask || mask & reserved_mask) return -EINVAL; return 0; diff --git a/arch/arm64/kernel/probes/kprobes.c b/arch/arm64/kernel/probes/kprobes.c index d1d182320245..c9e4d0720285 100644 --- a/arch/arm64/kernel/probes/kprobes.c +++ b/arch/arm64/kernel/probes/kprobes.c @@ -44,13 +44,28 @@ post_kprobe_handler(struct kprobe *, struct kprobe_ctlblk *, struct pt_regs *); static void __kprobes arch_prepare_ss_slot(struct kprobe *p) { kprobe_opcode_t *addr = p->ainsn.api.insn; - void *addrs[] = {addr, addr + 1}; - u32 insns[] = {p->opcode, BRK64_OPCODE_KPROBES_SS}; - /* prepare insn slot */ - aarch64_insn_patch_text(addrs, insns, 2); - - flush_icache_range((uintptr_t)addr, (uintptr_t)(addr + MAX_INSN_SIZE)); + /* + * Prepare insn slot, Mark Rutland points out it depends on a coupe of + * subtleties: + * + * - That the I-cache maintenance for these instructions is complete + * *before* the kprobe BRK is written (and aarch64_insn_patch_text_nosync() + * ensures this, but just omits causing a Context-Synchronization-Event + * on all CPUS). + * + * - That the kprobe BRK results in an exception (and consequently a + * Context-Synchronoization-Event), which ensures that the CPU will + * fetch thesingle-step slot instructions *after* this, ensuring that + * the new instructions are used + * + * It supposes to place ISB after patching to guarantee I-cache maintenance + * is observed on all CPUS, however, single-step slot is installed in + * the BRK exception handler, so it is unnecessary to generate + * Contex-Synchronization-Event via ISB again. + */ + aarch64_insn_patch_text_nosync(addr, p->opcode); + aarch64_insn_patch_text_nosync(addr + 1, BRK64_OPCODE_KPROBES_SS); /* * Needs restoring of return address after stepping xol. diff --git a/arch/arm64/kernel/proton-pack.c b/arch/arm64/kernel/proton-pack.c index 40be3a7c2c53..a8ea1637b137 100644 --- a/arch/arm64/kernel/proton-pack.c +++ b/arch/arm64/kernel/proton-pack.c @@ -168,7 +168,7 @@ static enum mitigation_state spectre_v2_get_cpu_hw_mitigation_state(void) /* If the CPU has CSV2 set, we're safe */ pfr0 = read_cpuid(ID_AA64PFR0_EL1); - if (cpuid_feature_extract_unsigned_field(pfr0, ID_AA64PFR0_CSV2_SHIFT)) + if (cpuid_feature_extract_unsigned_field(pfr0, ID_AA64PFR0_EL1_CSV2_SHIFT)) return SPECTRE_UNAFFECTED; /* Alternatively, we have a list of unaffected CPUs */ @@ -586,7 +586,7 @@ void __init spectre_v4_patch_fw_mitigation_enable(struct alt_instr *alt, if (spectre_v4_mitigations_off()) return; - if (cpus_have_final_cap(ARM64_SSBS)) + if (cpus_have_cap(ARM64_SSBS)) return; if (spectre_v4_mitigations_dynamic()) @@ -945,7 +945,7 @@ static bool supports_ecbhb(int scope) mmfr1 = read_sanitised_ftr_reg(SYS_ID_AA64MMFR1_EL1); return cpuid_feature_extract_unsigned_field(mmfr1, - ID_AA64MMFR1_ECBHB_SHIFT); + ID_AA64MMFR1_EL1_ECBHB_SHIFT); } bool is_spectre_bhb_affected(const struct arm64_cpu_capabilities *entry, @@ -988,6 +988,14 @@ static void this_cpu_set_vectors(enum arm64_bp_harden_el1_vectors slot) isb(); } +static bool __read_mostly __nospectre_bhb; +static int __init parse_spectre_bhb_param(char *str) +{ + __nospectre_bhb = true; + return 0; +} +early_param("nospectre_bhb", parse_spectre_bhb_param); + void spectre_bhb_enable_mitigation(const struct arm64_cpu_capabilities *entry) { bp_hardening_cb_t cpu_cb; @@ -1001,7 +1009,7 @@ void spectre_bhb_enable_mitigation(const struct arm64_cpu_capabilities *entry) /* No point mitigating Spectre-BHB alone. */ } else if (!IS_ENABLED(CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY)) { pr_info_once("spectre-bhb mitigation disabled by compile time option\n"); - } else if (cpu_mitigations_off()) { + } else if (cpu_mitigations_off() || __nospectre_bhb) { pr_info_once("spectre-bhb mitigation disabled by command line option\n"); } else if (supports_ecbhb(SCOPE_LOCAL_CPU)) { state = SPECTRE_MITIGATED; diff --git a/arch/arm64/kernel/psci.c b/arch/arm64/kernel/psci.c index ab7f4c476104..29a8e444db83 100644 --- a/arch/arm64/kernel/psci.c +++ b/arch/arm64/kernel/psci.c @@ -38,7 +38,7 @@ static int __init cpu_psci_cpu_prepare(unsigned int cpu) static int cpu_psci_cpu_boot(unsigned int cpu) { - phys_addr_t pa_secondary_entry = __pa_symbol(function_nocfi(secondary_entry)); + phys_addr_t pa_secondary_entry = __pa_symbol(secondary_entry); int err = psci_ops.cpu_on(cpu_logical_map(cpu), pa_secondary_entry); if (err) pr_err("failed to boot CPU%d (%d)\n", cpu, err); diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c index eb7c08dfb834..c2fb5755bbec 100644 --- a/arch/arm64/kernel/ptrace.c +++ b/arch/arm64/kernel/ptrace.c @@ -121,7 +121,7 @@ static bool regs_within_kernel_stack(struct pt_regs *regs, unsigned long addr) { return ((addr & ~(THREAD_SIZE - 1)) == (kernel_stack_pointer(regs) & ~(THREAD_SIZE - 1))) || - on_irq_stack(addr, sizeof(unsigned long), NULL); + on_irq_stack(addr, sizeof(unsigned long)); } /** @@ -666,10 +666,18 @@ static int fpr_set(struct task_struct *target, const struct user_regset *regset, static int tls_get(struct task_struct *target, const struct user_regset *regset, struct membuf to) { + int ret; + if (target == current) tls_preserve_current_state(); - return membuf_store(&to, target->thread.uw.tp_value); + ret = membuf_store(&to, target->thread.uw.tp_value); + if (system_supports_tpidr2()) + ret = membuf_store(&to, target->thread.tpidr2_el0); + else + ret = membuf_zero(&to, sizeof(u64)); + + return ret; } static int tls_set(struct task_struct *target, const struct user_regset *regset, @@ -677,13 +685,20 @@ static int tls_set(struct task_struct *target, const struct user_regset *regset, const void *kbuf, const void __user *ubuf) { int ret; - unsigned long tls = target->thread.uw.tp_value; + unsigned long tls[2]; - ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &tls, 0, -1); + tls[0] = target->thread.uw.tp_value; + if (system_supports_sme()) + tls[1] = target->thread.tpidr2_el0; + + ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, tls, 0, count); if (ret) return ret; - target->thread.uw.tp_value = tls; + target->thread.uw.tp_value = tls[0]; + if (system_supports_sme()) + target->thread.tpidr2_el0 = tls[1]; + return ret; } @@ -1084,7 +1099,6 @@ static int za_set(struct task_struct *target, if (!target->thread.sve_state) { sve_alloc(target, false); if (!target->thread.sve_state) { - clear_thread_flag(TIF_SME); ret = -ENOMEM; goto out; } @@ -1094,7 +1108,6 @@ static int za_set(struct task_struct *target, sme_alloc(target); if (!target->thread.za_state) { ret = -ENOMEM; - clear_tsk_thread_flag(target, TIF_SME); goto out; } @@ -1392,7 +1405,7 @@ static const struct user_regset aarch64_regsets[] = { }, [REGSET_TLS] = { .core_note_type = NT_ARM_TLS, - .n = 1, + .n = 2, .size = sizeof(void *), .align = sizeof(void *), .regset_get = tls_get, diff --git a/arch/arm64/kernel/reloc_test_core.c b/arch/arm64/kernel/reloc_test_core.c index e87a2b7f20f6..99f2ffe9fc05 100644 --- a/arch/arm64/kernel/reloc_test_core.c +++ b/arch/arm64/kernel/reloc_test_core.c @@ -48,7 +48,7 @@ static struct { { "R_AARCH64_PREL16", relative_data16, (u64)&sym64_rel }, }; -static int reloc_test_init(void) +static int __init reloc_test_init(void) { int i; @@ -67,7 +67,7 @@ static int reloc_test_init(void) return 0; } -static void reloc_test_exit(void) +static void __exit reloc_test_exit(void) { } diff --git a/arch/arm64/kernel/sdei.c b/arch/arm64/kernel/sdei.c index d20620a1c51a..d56e170e1ca7 100644 --- a/arch/arm64/kernel/sdei.c +++ b/arch/arm64/kernel/sdei.c @@ -162,38 +162,6 @@ static int init_sdei_scs(void) return err; } -static bool on_sdei_normal_stack(unsigned long sp, unsigned long size, - struct stack_info *info) -{ - unsigned long low = (unsigned long)raw_cpu_read(sdei_stack_normal_ptr); - unsigned long high = low + SDEI_STACK_SIZE; - - return on_stack(sp, size, low, high, STACK_TYPE_SDEI_NORMAL, info); -} - -static bool on_sdei_critical_stack(unsigned long sp, unsigned long size, - struct stack_info *info) -{ - unsigned long low = (unsigned long)raw_cpu_read(sdei_stack_critical_ptr); - unsigned long high = low + SDEI_STACK_SIZE; - - return on_stack(sp, size, low, high, STACK_TYPE_SDEI_CRITICAL, info); -} - -bool _on_sdei_stack(unsigned long sp, unsigned long size, struct stack_info *info) -{ - if (!IS_ENABLED(CONFIG_VMAP_STACK)) - return false; - - if (on_sdei_critical_stack(sp, size, info)) - return true; - - if (on_sdei_normal_stack(sp, size, info)) - return true; - - return false; -} - unsigned long sdei_arch_get_entry_point(int conduit) { /* diff --git a/arch/arm64/kernel/sleep.S b/arch/arm64/kernel/sleep.S index 617f78ad43a1..97c9de57725d 100644 --- a/arch/arm64/kernel/sleep.S +++ b/arch/arm64/kernel/sleep.S @@ -101,6 +101,9 @@ SYM_FUNC_END(__cpu_suspend_enter) SYM_CODE_START(cpu_resume) bl init_kernel_el bl finalise_el2 +#if VA_BITS > 48 + ldr_l x0, vabits_actual +#endif bl __cpu_setup /* enable the MMU early - so we can access sleep_save_stash by va */ adrp x1, swapper_pg_dir diff --git a/arch/arm64/kernel/smp_spin_table.c b/arch/arm64/kernel/smp_spin_table.c index 7e1624ecab3c..49029eace3ad 100644 --- a/arch/arm64/kernel/smp_spin_table.c +++ b/arch/arm64/kernel/smp_spin_table.c @@ -66,7 +66,7 @@ static int smp_spin_table_cpu_init(unsigned int cpu) static int smp_spin_table_cpu_prepare(unsigned int cpu) { __le64 __iomem *release_addr; - phys_addr_t pa_holding_pen = __pa_symbol(function_nocfi(secondary_holding_pen)); + phys_addr_t pa_holding_pen = __pa_symbol(secondary_holding_pen); if (!cpu_release_addr[cpu]) return -ENODEV; diff --git a/arch/arm64/kernel/stacktrace.c b/arch/arm64/kernel/stacktrace.c index ce190ee18a20..634279b3b03d 100644 --- a/arch/arm64/kernel/stacktrace.c +++ b/arch/arm64/kernel/stacktrace.c @@ -68,31 +68,6 @@ static inline void unwind_init_from_task(struct unwind_state *state, } /* - * We can only safely access per-cpu stacks from current in a non-preemptible - * context. - */ -static bool on_accessible_stack(const struct task_struct *tsk, - unsigned long sp, unsigned long size, - struct stack_info *info) -{ - if (info) - info->type = STACK_TYPE_UNKNOWN; - - if (on_task_stack(tsk, sp, size, info)) - return true; - if (tsk != current || preemptible()) - return false; - if (on_irq_stack(sp, size, info)) - return true; - if (on_overflow_stack(sp, size, info)) - return true; - if (on_sdei_stack(sp, size, info)) - return true; - - return false; -} - -/* * Unwind from one frame record (A) to the next frame record (B). * * We terminate early if the location of B indicates a malformed chain of frame @@ -103,14 +78,13 @@ static int notrace unwind_next(struct unwind_state *state) { struct task_struct *tsk = state->task; unsigned long fp = state->fp; - struct stack_info info; int err; /* Final frame; nothing to unwind */ if (fp == (unsigned long)task_pt_regs(tsk)->stackframe) return -ENOENT; - err = unwind_next_common(state, &info, on_accessible_stack, NULL); + err = unwind_next_frame_record(state); if (err) return err; @@ -190,11 +164,47 @@ void show_stack(struct task_struct *tsk, unsigned long *sp, const char *loglvl) barrier(); } +/* + * Per-cpu stacks are only accessible when unwinding the current task in a + * non-preemptible context. + */ +#define STACKINFO_CPU(name) \ + ({ \ + ((task == current) && !preemptible()) \ + ? stackinfo_get_##name() \ + : stackinfo_get_unknown(); \ + }) + +/* + * SDEI stacks are only accessible when unwinding the current task in an NMI + * context. + */ +#define STACKINFO_SDEI(name) \ + ({ \ + ((task == current) && in_nmi()) \ + ? stackinfo_get_sdei_##name() \ + : stackinfo_get_unknown(); \ + }) + noinline notrace void arch_stack_walk(stack_trace_consume_fn consume_entry, void *cookie, struct task_struct *task, struct pt_regs *regs) { - struct unwind_state state; + struct stack_info stacks[] = { + stackinfo_get_task(task), + STACKINFO_CPU(irq), +#if defined(CONFIG_VMAP_STACK) + STACKINFO_CPU(overflow), +#endif +#if defined(CONFIG_VMAP_STACK) && defined(CONFIG_ARM_SDE_INTERFACE) + STACKINFO_SDEI(normal), + STACKINFO_SDEI(critical), +#endif + }; + struct unwind_state state = { + .stacks = stacks, + .nr_stacks = ARRAY_SIZE(stacks), + }; if (regs) { if (task != current) diff --git a/arch/arm64/kernel/suspend.c b/arch/arm64/kernel/suspend.c index 9135fe0f3df5..8b02d310838f 100644 --- a/arch/arm64/kernel/suspend.c +++ b/arch/arm64/kernel/suspend.c @@ -43,6 +43,8 @@ void notrace __cpu_suspend_exit(void) { unsigned int cpu = smp_processor_id(); + mte_suspend_exit(); + /* * We are resuming from reset with the idmap active in TTBR0_EL1. * We must uninstall the idmap and restore the expected MMU diff --git a/arch/arm64/kernel/topology.c b/arch/arm64/kernel/topology.c index ad2bfc794257..44ebf5b2fc4b 100644 --- a/arch/arm64/kernel/topology.c +++ b/arch/arm64/kernel/topology.c @@ -237,7 +237,7 @@ static void amu_fie_setup(const struct cpumask *cpus) for_each_cpu(cpu, cpus) { if (!freq_counters_valid(cpu) || freq_inv_set_max_ratio(cpu, - cpufreq_get_hw_max_freq(cpu) * 1000, + cpufreq_get_hw_max_freq(cpu) * 1000ULL, arch_timer_get_rate())) return; } diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c index b7fed33981f7..23d281ed7621 100644 --- a/arch/arm64/kernel/traps.c +++ b/arch/arm64/kernel/traps.c @@ -26,6 +26,7 @@ #include <linux/syscalls.h> #include <linux/mm_types.h> #include <linux/kasan.h> +#include <linux/cfi.h> #include <asm/atomic.h> #include <asm/bug.h> @@ -180,12 +181,12 @@ static void dump_kernel_instr(const char *lvl, struct pt_regs *regs) #define S_SMP " SMP" -static int __die(const char *str, int err, struct pt_regs *regs) +static int __die(const char *str, long err, struct pt_regs *regs) { static int die_counter; int ret; - pr_emerg("Internal error: %s: %x [#%d]" S_PREEMPT S_SMP "\n", + pr_emerg("Internal error: %s: %016lx [#%d]" S_PREEMPT S_SMP "\n", str, err, ++die_counter); /* trap and error numbers are mostly meaningless on ARM */ @@ -206,7 +207,7 @@ static DEFINE_RAW_SPINLOCK(die_lock); /* * This function is protected against re-entrancy. */ -void die(const char *str, struct pt_regs *regs, int err) +void die(const char *str, struct pt_regs *regs, long err) { int ret; unsigned long flags; @@ -485,7 +486,7 @@ void arm64_notify_segfault(unsigned long addr) force_signal_inject(SIGSEGV, code, addr, 0); } -void do_undefinstr(struct pt_regs *regs) +void do_undefinstr(struct pt_regs *regs, unsigned long esr) { /* check for AArch32 breakpoint instructions */ if (!aarch32_break_handler(regs)) @@ -494,28 +495,38 @@ void do_undefinstr(struct pt_regs *regs) if (call_undef_hook(regs) == 0) return; - BUG_ON(!user_mode(regs)); + if (!user_mode(regs)) + die("Oops - Undefined instruction", regs, esr); + force_signal_inject(SIGILL, ILL_ILLOPC, regs->pc, 0); } NOKPROBE_SYMBOL(do_undefinstr); -void do_bti(struct pt_regs *regs) +void do_el0_bti(struct pt_regs *regs) { - BUG_ON(!user_mode(regs)); force_signal_inject(SIGILL, ILL_ILLOPC, regs->pc, 0); } -NOKPROBE_SYMBOL(do_bti); -void do_ptrauth_fault(struct pt_regs *regs, unsigned long esr) +void do_el1_bti(struct pt_regs *regs, unsigned long esr) +{ + die("Oops - BTI", regs, esr); +} +NOKPROBE_SYMBOL(do_el1_bti); + +void do_el0_fpac(struct pt_regs *regs, unsigned long esr) +{ + force_signal_inject(SIGILL, ILL_ILLOPN, regs->pc, esr); +} + +void do_el1_fpac(struct pt_regs *regs, unsigned long esr) { /* - * Unexpected FPAC exception or pointer authentication failure in - * the kernel: kill the task before it does any more harm. + * Unexpected FPAC exception in the kernel: kill the task before it + * does any more harm. */ - BUG_ON(!user_mode(regs)); - force_signal_inject(SIGILL, ILL_ILLOPN, regs->pc, esr); + die("Oops - FPAC", regs, esr); } -NOKPROBE_SYMBOL(do_ptrauth_fault); +NOKPROBE_SYMBOL(do_el1_fpac) #define __user_cache_maint(insn, address, res) \ if (address >= TASK_SIZE_MAX) { \ @@ -758,7 +769,7 @@ void do_cp15instr(unsigned long esr, struct pt_regs *regs) hook_base = cp15_64_hooks; break; default: - do_undefinstr(regs); + do_undefinstr(regs, esr); return; } @@ -773,7 +784,7 @@ void do_cp15instr(unsigned long esr, struct pt_regs *regs) * EL0. Fall back to our usual undefined instruction handler * so that we handle these consistently. */ - do_undefinstr(regs); + do_undefinstr(regs, esr); } NOKPROBE_SYMBOL(do_cp15instr); #endif @@ -793,7 +804,7 @@ void do_sysinstr(unsigned long esr, struct pt_regs *regs) * back to our usual undefined instruction handler so that we handle * these consistently. */ - do_undefinstr(regs); + do_undefinstr(regs, esr); } NOKPROBE_SYMBOL(do_sysinstr); @@ -970,7 +981,7 @@ static int bug_handler(struct pt_regs *regs, unsigned long esr) { switch (report_bug(regs->pc, regs)) { case BUG_TRAP_TYPE_BUG: - die("Oops - BUG", regs, 0); + die("Oops - BUG", regs, esr); break; case BUG_TRAP_TYPE_WARN: @@ -991,6 +1002,38 @@ static struct break_hook bug_break_hook = { .imm = BUG_BRK_IMM, }; +#ifdef CONFIG_CFI_CLANG +static int cfi_handler(struct pt_regs *regs, unsigned long esr) +{ + unsigned long target; + u32 type; + + target = pt_regs_read_reg(regs, FIELD_GET(CFI_BRK_IMM_TARGET, esr)); + type = (u32)pt_regs_read_reg(regs, FIELD_GET(CFI_BRK_IMM_TYPE, esr)); + + switch (report_cfi_failure(regs, regs->pc, &target, type)) { + case BUG_TRAP_TYPE_BUG: + die("Oops - CFI", regs, 0); + break; + + case BUG_TRAP_TYPE_WARN: + break; + + default: + return DBG_HOOK_ERROR; + } + + arm64_skip_faulting_instruction(regs, AARCH64_INSN_SIZE); + return DBG_HOOK_HANDLED; +} + +static struct break_hook cfi_break_hook = { + .fn = cfi_handler, + .imm = CFI_BRK_IMM_BASE, + .mask = CFI_BRK_IMM_MASK, +}; +#endif /* CONFIG_CFI_CLANG */ + static int reserved_fault_handler(struct pt_regs *regs, unsigned long esr) { pr_err("%s generated an invalid instruction at %pS!\n", @@ -1038,7 +1081,7 @@ static int kasan_handler(struct pt_regs *regs, unsigned long esr) * This is something that might be fixed at some point in the future. */ if (!recover) - die("Oops - KASAN", regs, 0); + die("Oops - KASAN", regs, esr); /* If thread survives, skip over the brk instruction and continue: */ arm64_skip_faulting_instruction(regs, AARCH64_INSN_SIZE); @@ -1052,6 +1095,9 @@ static struct break_hook kasan_break_hook = { }; #endif + +#define esr_comment(esr) ((esr) & ESR_ELx_BRK64_ISS_COMMENT_MASK) + /* * Initial handler for AArch64 BRK exceptions * This handler only used until debug_traps_init(). @@ -1059,10 +1105,12 @@ static struct break_hook kasan_break_hook = { int __init early_brk64(unsigned long addr, unsigned long esr, struct pt_regs *regs) { +#ifdef CONFIG_CFI_CLANG + if ((esr_comment(esr) & ~CFI_BRK_IMM_MASK) == CFI_BRK_IMM_BASE) + return cfi_handler(regs, esr) != DBG_HOOK_HANDLED; +#endif #ifdef CONFIG_KASAN_SW_TAGS - unsigned long comment = esr & ESR_ELx_BRK64_ISS_COMMENT_MASK; - - if ((comment & ~KASAN_BRK_MASK) == KASAN_BRK_IMM) + if ((esr_comment(esr) & ~KASAN_BRK_MASK) == KASAN_BRK_IMM) return kasan_handler(regs, esr) != DBG_HOOK_HANDLED; #endif return bug_handler(regs, esr) != DBG_HOOK_HANDLED; @@ -1071,6 +1119,9 @@ int __init early_brk64(unsigned long addr, unsigned long esr, void __init trap_init(void) { register_kernel_break_hook(&bug_break_hook); +#ifdef CONFIG_CFI_CLANG + register_kernel_break_hook(&cfi_break_hook); +#endif register_kernel_break_hook(&fault_break_hook); #ifdef CONFIG_KASAN_SW_TAGS register_kernel_break_hook(&kasan_break_hook); diff --git a/arch/arm64/kernel/vdso.c b/arch/arm64/kernel/vdso.c index a61fc4f989b3..ac93a2ee9c07 100644 --- a/arch/arm64/kernel/vdso.c +++ b/arch/arm64/kernel/vdso.c @@ -29,9 +29,6 @@ #include <asm/signal32.h> #include <asm/vdso.h> -extern char vdso_start[], vdso_end[]; -extern char vdso32_start[], vdso32_end[]; - enum vdso_abi { VDSO_ABI_AA64, VDSO_ABI_AA32, diff --git a/arch/arm64/kernel/vdso/Makefile b/arch/arm64/kernel/vdso/Makefile index bafbf78fab77..619e2dc7ee14 100644 --- a/arch/arm64/kernel/vdso/Makefile +++ b/arch/arm64/kernel/vdso/Makefile @@ -40,7 +40,8 @@ ccflags-y += -DDISABLE_BRANCH_PROFILING -DBUILD_VDSO # kernel with CONFIG_WERROR enabled. CFLAGS_REMOVE_vgettimeofday.o = $(CC_FLAGS_FTRACE) -Os $(CC_FLAGS_SCS) \ $(RANDSTRUCT_CFLAGS) $(GCC_PLUGINS_CFLAGS) \ - $(CC_FLAGS_LTO) -Wmissing-prototypes -Wmissing-declarations + $(CC_FLAGS_LTO) $(CC_FLAGS_CFI) \ + -Wmissing-prototypes -Wmissing-declarations KASAN_SANITIZE := n KCSAN_SANITIZE := n UBSAN_SANITIZE := n diff --git a/arch/arm64/kernel/vdso/vdso.lds.S b/arch/arm64/kernel/vdso/vdso.lds.S index e69fb4aaaf3e..6028f1fe2d1c 100644 --- a/arch/arm64/kernel/vdso/vdso.lds.S +++ b/arch/arm64/kernel/vdso/vdso.lds.S @@ -48,6 +48,13 @@ SECTIONS PROVIDE (_etext = .); PROVIDE (etext = .); + . = ALIGN(4); + .altinstructions : { + __alt_instructions = .; + *(.altinstructions) + __alt_instructions_end = .; + } + .dynamic : { *(.dynamic) } :text :dynamic .rela.dyn : ALIGN(8) { *(.rela .rela*) } diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c index 2ff0ef62abad..917086be5c6b 100644 --- a/arch/arm64/kvm/arm.c +++ b/arch/arm64/kvm/arm.c @@ -2114,7 +2114,7 @@ static int finalize_hyp_mode(void) * at, which would end badly once inaccessible. */ kmemleak_free_part(__hyp_bss_start, __hyp_bss_end - __hyp_bss_start); - kmemleak_free_part(__va(hyp_mem_base), hyp_mem_size); + kmemleak_free_part_phys(hyp_mem_base, hyp_mem_size); return pkvm_drop_host_privileges(); } diff --git a/arch/arm64/kvm/debug.c b/arch/arm64/kvm/debug.c index 0b28d7db7c76..3f7563d768e2 100644 --- a/arch/arm64/kvm/debug.c +++ b/arch/arm64/kvm/debug.c @@ -295,12 +295,12 @@ void kvm_arch_vcpu_load_debug_state_flags(struct kvm_vcpu *vcpu) * If SPE is present on this CPU and is available at current EL, * we may need to check if the host state needs to be saved. */ - if (cpuid_feature_extract_unsigned_field(dfr0, ID_AA64DFR0_PMSVER_SHIFT) && + if (cpuid_feature_extract_unsigned_field(dfr0, ID_AA64DFR0_EL1_PMSVer_SHIFT) && !(read_sysreg_s(SYS_PMBIDR_EL1) & BIT(SYS_PMBIDR_EL1_P_SHIFT))) vcpu_set_flag(vcpu, DEBUG_STATE_SAVE_SPE); /* Check if we have TRBE implemented and available at the host */ - if (cpuid_feature_extract_unsigned_field(dfr0, ID_AA64DFR0_TRBE_SHIFT) && + if (cpuid_feature_extract_unsigned_field(dfr0, ID_AA64DFR0_EL1_TraceBuffer_SHIFT) && !(read_sysreg_s(SYS_TRBIDR_EL1) & TRBIDR_PROG)) vcpu_set_flag(vcpu, DEBUG_STATE_SAVE_TRBE); } diff --git a/arch/arm64/kvm/hyp/hyp-entry.S b/arch/arm64/kvm/hyp/hyp-entry.S index 7839d075729b..8f3f93fa119e 100644 --- a/arch/arm64/kvm/hyp/hyp-entry.S +++ b/arch/arm64/kvm/hyp/hyp-entry.S @@ -196,7 +196,7 @@ SYM_CODE_END(__kvm_hyp_vector) sub sp, sp, #(8 * 4) stp x2, x3, [sp, #(8 * 0)] stp x0, x1, [sp, #(8 * 2)] - alternative_cb spectre_bhb_patch_wa3 + alternative_cb ARM64_ALWAYS_SYSTEM, spectre_bhb_patch_wa3 /* Patched to mov WA3 when supported */ mov w0, #ARM_SMCCC_ARCH_WORKAROUND_1 alternative_cb_end @@ -216,7 +216,7 @@ SYM_CODE_END(__kvm_hyp_vector) mitigate_spectre_bhb_clear_insn .endif .if \indirect != 0 - alternative_cb kvm_patch_vector_branch + alternative_cb ARM64_ALWAYS_SYSTEM, kvm_patch_vector_branch /* * For ARM64_SPECTRE_V3A configurations, these NOPs get replaced with: * diff --git a/arch/arm64/kvm/hyp/include/nvhe/fixed_config.h b/arch/arm64/kvm/hyp/include/nvhe/fixed_config.h index fa6e466ed57f..07edfc7524c9 100644 --- a/arch/arm64/kvm/hyp/include/nvhe/fixed_config.h +++ b/arch/arm64/kvm/hyp/include/nvhe/fixed_config.h @@ -35,9 +35,9 @@ * - Data Independent Timing */ #define PVM_ID_AA64PFR0_ALLOW (\ - ARM64_FEATURE_MASK(ID_AA64PFR0_FP) | \ - ARM64_FEATURE_MASK(ID_AA64PFR0_ASIMD) | \ - ARM64_FEATURE_MASK(ID_AA64PFR0_DIT) \ + ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_FP) | \ + ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_AdvSIMD) | \ + ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_DIT) \ ) /* @@ -49,11 +49,11 @@ * Supported by KVM */ #define PVM_ID_AA64PFR0_RESTRICT_UNSIGNED (\ - FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL0), ID_AA64PFR0_ELx_64BIT_ONLY) | \ - FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1), ID_AA64PFR0_ELx_64BIT_ONLY) | \ - FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL2), ID_AA64PFR0_ELx_64BIT_ONLY) | \ - FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL3), ID_AA64PFR0_ELx_64BIT_ONLY) | \ - FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_RAS), ID_AA64PFR0_RAS_V1) \ + FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_EL0), ID_AA64PFR0_EL1_ELx_64BIT_ONLY) | \ + FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_EL1), ID_AA64PFR0_EL1_ELx_64BIT_ONLY) | \ + FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_EL2), ID_AA64PFR0_EL1_ELx_64BIT_ONLY) | \ + FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_EL3), ID_AA64PFR0_EL1_ELx_64BIT_ONLY) | \ + FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_RAS), ID_AA64PFR0_EL1_RAS_IMP) \ ) /* @@ -62,8 +62,8 @@ * - Speculative Store Bypassing */ #define PVM_ID_AA64PFR1_ALLOW (\ - ARM64_FEATURE_MASK(ID_AA64PFR1_BT) | \ - ARM64_FEATURE_MASK(ID_AA64PFR1_SSBS) \ + ARM64_FEATURE_MASK(ID_AA64PFR1_EL1_BT) | \ + ARM64_FEATURE_MASK(ID_AA64PFR1_EL1_SSBS) \ ) /* @@ -74,10 +74,10 @@ * - Non-context synchronizing exception entry and exit */ #define PVM_ID_AA64MMFR0_ALLOW (\ - ARM64_FEATURE_MASK(ID_AA64MMFR0_BIGENDEL) | \ - ARM64_FEATURE_MASK(ID_AA64MMFR0_SNSMEM) | \ - ARM64_FEATURE_MASK(ID_AA64MMFR0_BIGENDEL0) | \ - ARM64_FEATURE_MASK(ID_AA64MMFR0_EXS) \ + ARM64_FEATURE_MASK(ID_AA64MMFR0_EL1_BIGEND) | \ + ARM64_FEATURE_MASK(ID_AA64MMFR0_EL1_SNSMEM) | \ + ARM64_FEATURE_MASK(ID_AA64MMFR0_EL1_BIGENDEL0) | \ + ARM64_FEATURE_MASK(ID_AA64MMFR0_EL1_EXS) \ ) /* @@ -86,8 +86,8 @@ * - 16-bit ASID */ #define PVM_ID_AA64MMFR0_RESTRICT_UNSIGNED (\ - FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64MMFR0_PARANGE), ID_AA64MMFR0_PARANGE_40) | \ - FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64MMFR0_ASID), ID_AA64MMFR0_ASID_16) \ + FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64MMFR0_EL1_PARANGE), ID_AA64MMFR0_EL1_PARANGE_40) | \ + FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64MMFR0_EL1_ASIDBITS), ID_AA64MMFR0_EL1_ASIDBITS_16) \ ) /* @@ -100,12 +100,12 @@ * - Enhanced Translation Synchronization */ #define PVM_ID_AA64MMFR1_ALLOW (\ - ARM64_FEATURE_MASK(ID_AA64MMFR1_HADBS) | \ - ARM64_FEATURE_MASK(ID_AA64MMFR1_VMIDBITS) | \ - ARM64_FEATURE_MASK(ID_AA64MMFR1_HPD) | \ - ARM64_FEATURE_MASK(ID_AA64MMFR1_PAN) | \ - ARM64_FEATURE_MASK(ID_AA64MMFR1_SPECSEI) | \ - ARM64_FEATURE_MASK(ID_AA64MMFR1_ETS) \ + ARM64_FEATURE_MASK(ID_AA64MMFR1_EL1_HAFDBS) | \ + ARM64_FEATURE_MASK(ID_AA64MMFR1_EL1_VMIDBits) | \ + ARM64_FEATURE_MASK(ID_AA64MMFR1_EL1_HPDS) | \ + ARM64_FEATURE_MASK(ID_AA64MMFR1_EL1_PAN) | \ + ARM64_FEATURE_MASK(ID_AA64MMFR1_EL1_SpecSEI) | \ + ARM64_FEATURE_MASK(ID_AA64MMFR1_EL1_ETS) \ ) /* @@ -120,14 +120,14 @@ * - E0PDx mechanism */ #define PVM_ID_AA64MMFR2_ALLOW (\ - ARM64_FEATURE_MASK(ID_AA64MMFR2_CNP) | \ - ARM64_FEATURE_MASK(ID_AA64MMFR2_UAO) | \ - ARM64_FEATURE_MASK(ID_AA64MMFR2_IESB) | \ - ARM64_FEATURE_MASK(ID_AA64MMFR2_AT) | \ - ARM64_FEATURE_MASK(ID_AA64MMFR2_IDS) | \ - ARM64_FEATURE_MASK(ID_AA64MMFR2_TTL) | \ - ARM64_FEATURE_MASK(ID_AA64MMFR2_BBM) | \ - ARM64_FEATURE_MASK(ID_AA64MMFR2_E0PD) \ + ARM64_FEATURE_MASK(ID_AA64MMFR2_EL1_CnP) | \ + ARM64_FEATURE_MASK(ID_AA64MMFR2_EL1_UAO) | \ + ARM64_FEATURE_MASK(ID_AA64MMFR2_EL1_IESB) | \ + ARM64_FEATURE_MASK(ID_AA64MMFR2_EL1_AT) | \ + ARM64_FEATURE_MASK(ID_AA64MMFR2_EL1_IDS) | \ + ARM64_FEATURE_MASK(ID_AA64MMFR2_EL1_TTL) | \ + ARM64_FEATURE_MASK(ID_AA64MMFR2_EL1_BBM) | \ + ARM64_FEATURE_MASK(ID_AA64MMFR2_EL1_E0PD) \ ) /* diff --git a/arch/arm64/kvm/hyp/nvhe/pkvm.c b/arch/arm64/kvm/hyp/nvhe/pkvm.c index 99c8d8b73e70..85d3b7ae720f 100644 --- a/arch/arm64/kvm/hyp/nvhe/pkvm.c +++ b/arch/arm64/kvm/hyp/nvhe/pkvm.c @@ -20,35 +20,35 @@ static void pvm_init_traps_aa64pfr0(struct kvm_vcpu *vcpu) u64 cptr_set = 0; /* Protected KVM does not support AArch32 guests. */ - BUILD_BUG_ON(FIELD_GET(ARM64_FEATURE_MASK(ID_AA64PFR0_EL0), - PVM_ID_AA64PFR0_RESTRICT_UNSIGNED) != ID_AA64PFR0_ELx_64BIT_ONLY); - BUILD_BUG_ON(FIELD_GET(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1), - PVM_ID_AA64PFR0_RESTRICT_UNSIGNED) != ID_AA64PFR0_ELx_64BIT_ONLY); + BUILD_BUG_ON(FIELD_GET(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_EL0), + PVM_ID_AA64PFR0_RESTRICT_UNSIGNED) != ID_AA64PFR0_EL1_ELx_64BIT_ONLY); + BUILD_BUG_ON(FIELD_GET(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_EL1), + PVM_ID_AA64PFR0_RESTRICT_UNSIGNED) != ID_AA64PFR0_EL1_ELx_64BIT_ONLY); /* * Linux guests assume support for floating-point and Advanced SIMD. Do * not change the trapping behavior for these from the KVM default. */ - BUILD_BUG_ON(!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64PFR0_FP), + BUILD_BUG_ON(!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_FP), PVM_ID_AA64PFR0_ALLOW)); - BUILD_BUG_ON(!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64PFR0_ASIMD), + BUILD_BUG_ON(!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_AdvSIMD), PVM_ID_AA64PFR0_ALLOW)); /* Trap RAS unless all current versions are supported */ - if (FIELD_GET(ARM64_FEATURE_MASK(ID_AA64PFR0_RAS), feature_ids) < - ID_AA64PFR0_RAS_V1P1) { + if (FIELD_GET(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_RAS), feature_ids) < + ID_AA64PFR0_EL1_RAS_V1P1) { hcr_set |= HCR_TERR | HCR_TEA; hcr_clear |= HCR_FIEN; } /* Trap AMU */ - if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64PFR0_AMU), feature_ids)) { + if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_AMU), feature_ids)) { hcr_clear |= HCR_AMVOFFEN; cptr_set |= CPTR_EL2_TAM; } /* Trap SVE */ - if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64PFR0_SVE), feature_ids)) + if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_SVE), feature_ids)) cptr_set |= CPTR_EL2_TZ; vcpu->arch.hcr_el2 |= hcr_set; @@ -66,7 +66,7 @@ static void pvm_init_traps_aa64pfr1(struct kvm_vcpu *vcpu) u64 hcr_clear = 0; /* Memory Tagging: Trap and Treat as Untagged if not supported. */ - if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64PFR1_MTE), feature_ids)) { + if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64PFR1_EL1_MTE), feature_ids)) { hcr_set |= HCR_TID5; hcr_clear |= HCR_DCT | HCR_ATA; } @@ -86,32 +86,32 @@ static void pvm_init_traps_aa64dfr0(struct kvm_vcpu *vcpu) u64 cptr_set = 0; /* Trap/constrain PMU */ - if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64DFR0_PMUVER), feature_ids)) { + if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64DFR0_EL1_PMUVer), feature_ids)) { mdcr_set |= MDCR_EL2_TPM | MDCR_EL2_TPMCR; mdcr_clear |= MDCR_EL2_HPME | MDCR_EL2_MTPME | MDCR_EL2_HPMN_MASK; } /* Trap Debug */ - if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64DFR0_DEBUGVER), feature_ids)) + if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64DFR0_EL1_DebugVer), feature_ids)) mdcr_set |= MDCR_EL2_TDRA | MDCR_EL2_TDA | MDCR_EL2_TDE; /* Trap OS Double Lock */ - if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64DFR0_DOUBLELOCK), feature_ids)) + if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64DFR0_EL1_DoubleLock), feature_ids)) mdcr_set |= MDCR_EL2_TDOSA; /* Trap SPE */ - if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64DFR0_PMSVER), feature_ids)) { + if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64DFR0_EL1_PMSVer), feature_ids)) { mdcr_set |= MDCR_EL2_TPMS; mdcr_clear |= MDCR_EL2_E2PB_MASK << MDCR_EL2_E2PB_SHIFT; } /* Trap Trace Filter */ - if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64DFR0_TRACE_FILT), feature_ids)) + if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64DFR0_EL1_TraceFilt), feature_ids)) mdcr_set |= MDCR_EL2_TTRF; /* Trap Trace */ - if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64DFR0_TRACEVER), feature_ids)) + if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64DFR0_EL1_TraceVer), feature_ids)) cptr_set |= CPTR_EL2_TTA; vcpu->arch.mdcr_el2 |= mdcr_set; @@ -128,7 +128,7 @@ static void pvm_init_traps_aa64mmfr0(struct kvm_vcpu *vcpu) u64 mdcr_set = 0; /* Trap Debug Communications Channel registers */ - if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64MMFR0_FGT), feature_ids)) + if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64MMFR0_EL1_FGT), feature_ids)) mdcr_set |= MDCR_EL2_TDCC; vcpu->arch.mdcr_el2 |= mdcr_set; @@ -143,7 +143,7 @@ static void pvm_init_traps_aa64mmfr1(struct kvm_vcpu *vcpu) u64 hcr_set = 0; /* Trap LOR */ - if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64MMFR1_LOR), feature_ids)) + if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64MMFR1_EL1_LO), feature_ids)) hcr_set |= HCR_TLOR; vcpu->arch.hcr_el2 |= hcr_set; diff --git a/arch/arm64/kvm/hyp/nvhe/stacktrace.c b/arch/arm64/kvm/hyp/nvhe/stacktrace.c index 58f645ad66bc..ed6b58b19cfa 100644 --- a/arch/arm64/kvm/hyp/nvhe/stacktrace.c +++ b/arch/arm64/kvm/hyp/nvhe/stacktrace.c @@ -39,41 +39,32 @@ static void hyp_prepare_backtrace(unsigned long fp, unsigned long pc) DEFINE_PER_CPU(unsigned long [NVHE_STACKTRACE_SIZE/sizeof(long)], pkvm_stacktrace); -static bool on_overflow_stack(unsigned long sp, unsigned long size, - struct stack_info *info) +static struct stack_info stackinfo_get_overflow(void) { unsigned long low = (unsigned long)this_cpu_ptr(overflow_stack); unsigned long high = low + OVERFLOW_STACK_SIZE; - return on_stack(sp, size, low, high, STACK_TYPE_OVERFLOW, info); + return (struct stack_info) { + .low = low, + .high = high, + }; } -static bool on_hyp_stack(unsigned long sp, unsigned long size, - struct stack_info *info) +static struct stack_info stackinfo_get_hyp(void) { struct kvm_nvhe_init_params *params = this_cpu_ptr(&kvm_init_params); unsigned long high = params->stack_hyp_va; unsigned long low = high - PAGE_SIZE; - return on_stack(sp, size, low, high, STACK_TYPE_HYP, info); -} - -static bool on_accessible_stack(const struct task_struct *tsk, - unsigned long sp, unsigned long size, - struct stack_info *info) -{ - if (info) - info->type = STACK_TYPE_UNKNOWN; - - return (on_overflow_stack(sp, size, info) || - on_hyp_stack(sp, size, info)); + return (struct stack_info) { + .low = low, + .high = high, + }; } static int unwind_next(struct unwind_state *state) { - struct stack_info info; - - return unwind_next_common(state, &info, on_accessible_stack, NULL); + return unwind_next_frame_record(state); } static void notrace unwind(struct unwind_state *state, @@ -129,7 +120,14 @@ static bool pkvm_save_backtrace_entry(void *arg, unsigned long where) */ static void pkvm_save_backtrace(unsigned long fp, unsigned long pc) { - struct unwind_state state; + struct stack_info stacks[] = { + stackinfo_get_overflow(), + stackinfo_get_hyp(), + }; + struct unwind_state state = { + .stacks = stacks, + .nr_stacks = ARRAY_SIZE(stacks), + }; int idx = 0; kvm_nvhe_unwind_init(&state, fp, pc); diff --git a/arch/arm64/kvm/hyp/nvhe/sys_regs.c b/arch/arm64/kvm/hyp/nvhe/sys_regs.c index e20fa4475dac..0f9ac25afdf4 100644 --- a/arch/arm64/kvm/hyp/nvhe/sys_regs.c +++ b/arch/arm64/kvm/hyp/nvhe/sys_regs.c @@ -92,9 +92,9 @@ static u64 get_pvm_id_aa64pfr0(const struct kvm_vcpu *vcpu) PVM_ID_AA64PFR0_RESTRICT_UNSIGNED); /* Spectre and Meltdown mitigation in KVM */ - set_mask |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_CSV2), + set_mask |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV2), (u64)kvm->arch.pfr0_csv2); - set_mask |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_CSV3), + set_mask |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV3), (u64)kvm->arch.pfr0_csv3); return (id_aa64pfr0_el1_sys_val & allow_mask) | set_mask; @@ -106,7 +106,7 @@ static u64 get_pvm_id_aa64pfr1(const struct kvm_vcpu *vcpu) u64 allow_mask = PVM_ID_AA64PFR1_ALLOW; if (!kvm_has_mte(kvm)) - allow_mask &= ~ARM64_FEATURE_MASK(ID_AA64PFR1_MTE); + allow_mask &= ~ARM64_FEATURE_MASK(ID_AA64PFR1_EL1_MTE); return id_aa64pfr1_el1_sys_val & allow_mask; } @@ -281,8 +281,8 @@ static bool pvm_access_id_aarch32(struct kvm_vcpu *vcpu, * No support for AArch32 guests, therefore, pKVM has no sanitized copy * of AArch32 feature id registers. */ - BUILD_BUG_ON(FIELD_GET(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1), - PVM_ID_AA64PFR0_RESTRICT_UNSIGNED) > ID_AA64PFR0_ELx_64BIT_ONLY); + BUILD_BUG_ON(FIELD_GET(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_EL1), + PVM_ID_AA64PFR0_RESTRICT_UNSIGNED) > ID_AA64PFR0_EL1_ELx_64BIT_ONLY); return pvm_access_raz_wi(vcpu, p, r); } diff --git a/arch/arm64/kvm/hyp/pgtable.c b/arch/arm64/kvm/hyp/pgtable.c index 2cb3867eb7c2..cdf8e76b0be1 100644 --- a/arch/arm64/kvm/hyp/pgtable.c +++ b/arch/arm64/kvm/hyp/pgtable.c @@ -61,7 +61,7 @@ struct kvm_pgtable_walk_data { static bool kvm_phys_is_valid(u64 phys) { - return phys < BIT(id_aa64mmfr0_parange_to_phys_shift(ID_AA64MMFR0_PARANGE_MAX)); + return phys < BIT(id_aa64mmfr0_parange_to_phys_shift(ID_AA64MMFR0_EL1_PARANGE_MAX)); } static bool kvm_block_mapping_supported(u64 addr, u64 end, u64 phys, u32 level) diff --git a/arch/arm64/kvm/pmu-emul.c b/arch/arm64/kvm/pmu-emul.c index 11c43bed5f97..0003c7d37533 100644 --- a/arch/arm64/kvm/pmu-emul.c +++ b/arch/arm64/kvm/pmu-emul.c @@ -33,12 +33,12 @@ static u32 kvm_pmu_event_mask(struct kvm *kvm) pmuver = kvm->arch.arm_pmu->pmuver; switch (pmuver) { - case ID_AA64DFR0_PMUVER_8_0: + case ID_AA64DFR0_EL1_PMUVer_IMP: return GENMASK(9, 0); - case ID_AA64DFR0_PMUVER_8_1: - case ID_AA64DFR0_PMUVER_8_4: - case ID_AA64DFR0_PMUVER_8_5: - case ID_AA64DFR0_PMUVER_8_7: + case ID_AA64DFR0_EL1_PMUVer_V3P1: + case ID_AA64DFR0_EL1_PMUVer_V3P4: + case ID_AA64DFR0_EL1_PMUVer_V3P5: + case ID_AA64DFR0_EL1_PMUVer_V3P7: return GENMASK(15, 0); default: /* Shouldn't be here, just for sanity */ WARN_ONCE(1, "Unknown PMU version %d\n", pmuver); @@ -774,7 +774,7 @@ void kvm_host_pmu_init(struct arm_pmu *pmu) { struct arm_pmu_entry *entry; - if (pmu->pmuver == 0 || pmu->pmuver == ID_AA64DFR0_PMUVER_IMP_DEF) + if (pmu->pmuver == 0 || pmu->pmuver == ID_AA64DFR0_EL1_PMUVer_IMP_DEF) return; mutex_lock(&arm_pmus_lock); @@ -828,7 +828,7 @@ static struct arm_pmu *kvm_pmu_probe_armpmu(void) if (event->pmu) { pmu = to_arm_pmu(event->pmu); if (pmu->pmuver == 0 || - pmu->pmuver == ID_AA64DFR0_PMUVER_IMP_DEF) + pmu->pmuver == ID_AA64DFR0_EL1_PMUVer_IMP_DEF) pmu = NULL; } @@ -856,7 +856,7 @@ u64 kvm_pmu_get_pmceid(struct kvm_vcpu *vcpu, bool pmceid1) * Don't advertise STALL_SLOT, as PMMIR_EL0 is handled * as RAZ */ - if (vcpu->kvm->arch.arm_pmu->pmuver >= ID_AA64DFR0_PMUVER_8_4) + if (vcpu->kvm->arch.arm_pmu->pmuver >= ID_AA64DFR0_EL1_PMUVer_V3P4) val &= ~BIT_ULL(ARMV8_PMUV3_PERFCTR_STALL_SLOT - 32); base = 32; } diff --git a/arch/arm64/kvm/reset.c b/arch/arm64/kvm/reset.c index 0e08fbe68715..5ae18472205a 100644 --- a/arch/arm64/kvm/reset.c +++ b/arch/arm64/kvm/reset.c @@ -359,7 +359,7 @@ int kvm_set_ipa_limit(void) mmfr0 = read_sanitised_ftr_reg(SYS_ID_AA64MMFR0_EL1); parange = cpuid_feature_extract_unsigned_field(mmfr0, - ID_AA64MMFR0_PARANGE_SHIFT); + ID_AA64MMFR0_EL1_PARANGE_SHIFT); /* * IPA size beyond 48 bits could not be supported * on either 4K or 16K page size. Hence let's cap @@ -367,20 +367,20 @@ int kvm_set_ipa_limit(void) * on the system. */ if (PAGE_SIZE != SZ_64K) - parange = min(parange, (unsigned int)ID_AA64MMFR0_PARANGE_48); + parange = min(parange, (unsigned int)ID_AA64MMFR0_EL1_PARANGE_48); /* * Check with ARMv8.5-GTG that our PAGE_SIZE is supported at * Stage-2. If not, things will stop very quickly. */ - switch (cpuid_feature_extract_unsigned_field(mmfr0, ID_AA64MMFR0_TGRAN_2_SHIFT)) { - case ID_AA64MMFR0_TGRAN_2_SUPPORTED_NONE: + switch (cpuid_feature_extract_unsigned_field(mmfr0, ID_AA64MMFR0_EL1_TGRAN_2_SHIFT)) { + case ID_AA64MMFR0_EL1_TGRAN_2_SUPPORTED_NONE: kvm_err("PAGE_SIZE not supported at Stage-2, giving up\n"); return -EINVAL; - case ID_AA64MMFR0_TGRAN_2_SUPPORTED_DEFAULT: + case ID_AA64MMFR0_EL1_TGRAN_2_SUPPORTED_DEFAULT: kvm_debug("PAGE_SIZE supported at Stage-2 (default)\n"); break; - case ID_AA64MMFR0_TGRAN_2_SUPPORTED_MIN ... ID_AA64MMFR0_TGRAN_2_SUPPORTED_MAX: + case ID_AA64MMFR0_EL1_TGRAN_2_SUPPORTED_MIN ... ID_AA64MMFR0_EL1_TGRAN_2_SUPPORTED_MAX: kvm_debug("PAGE_SIZE supported at Stage-2 (advertised)\n"); break; default: diff --git a/arch/arm64/kvm/stacktrace.c b/arch/arm64/kvm/stacktrace.c index 949d19d603fb..3ace5b75813b 100644 --- a/arch/arm64/kvm/stacktrace.c +++ b/arch/arm64/kvm/stacktrace.c @@ -21,6 +21,54 @@ #include <asm/stacktrace/nvhe.h> +static struct stack_info stackinfo_get_overflow(void) +{ + struct kvm_nvhe_stacktrace_info *stacktrace_info + = this_cpu_ptr_nvhe_sym(kvm_stacktrace_info); + unsigned long low = (unsigned long)stacktrace_info->overflow_stack_base; + unsigned long high = low + OVERFLOW_STACK_SIZE; + + return (struct stack_info) { + .low = low, + .high = high, + }; +} + +static struct stack_info stackinfo_get_overflow_kern_va(void) +{ + unsigned long low = (unsigned long)this_cpu_ptr_nvhe_sym(overflow_stack); + unsigned long high = low + OVERFLOW_STACK_SIZE; + + return (struct stack_info) { + .low = low, + .high = high, + }; +} + +static struct stack_info stackinfo_get_hyp(void) +{ + struct kvm_nvhe_stacktrace_info *stacktrace_info + = this_cpu_ptr_nvhe_sym(kvm_stacktrace_info); + unsigned long low = (unsigned long)stacktrace_info->stack_base; + unsigned long high = low + PAGE_SIZE; + + return (struct stack_info) { + .low = low, + .high = high, + }; +} + +static struct stack_info stackinfo_get_hyp_kern_va(void) +{ + unsigned long low = (unsigned long)*this_cpu_ptr(&kvm_arm_hyp_stack_page); + unsigned long high = low + PAGE_SIZE; + + return (struct stack_info) { + .low = low, + .high = high, + }; +} + /* * kvm_nvhe_stack_kern_va - Convert KVM nVHE HYP stack addresses to a kernel VAs * @@ -34,73 +82,45 @@ * Returns true on success and updates @addr to its corresponding kernel VA; * otherwise returns false. */ -static bool kvm_nvhe_stack_kern_va(unsigned long *addr, - enum stack_type type) +static bool kvm_nvhe_stack_kern_va(unsigned long *addr, unsigned long size) { - struct kvm_nvhe_stacktrace_info *stacktrace_info; - unsigned long hyp_base, kern_base, hyp_offset; + struct stack_info stack_hyp, stack_kern; - stacktrace_info = this_cpu_ptr_nvhe_sym(kvm_stacktrace_info); + stack_hyp = stackinfo_get_hyp(); + stack_kern = stackinfo_get_hyp_kern_va(); + if (stackinfo_on_stack(&stack_hyp, *addr, size)) + goto found; - switch (type) { - case STACK_TYPE_HYP: - kern_base = (unsigned long)*this_cpu_ptr(&kvm_arm_hyp_stack_page); - hyp_base = (unsigned long)stacktrace_info->stack_base; - break; - case STACK_TYPE_OVERFLOW: - kern_base = (unsigned long)this_cpu_ptr_nvhe_sym(overflow_stack); - hyp_base = (unsigned long)stacktrace_info->overflow_stack_base; - break; - default: - return false; - } + stack_hyp = stackinfo_get_overflow(); + stack_kern = stackinfo_get_overflow_kern_va(); + if (stackinfo_on_stack(&stack_hyp, *addr, size)) + goto found; - hyp_offset = *addr - hyp_base; - - *addr = kern_base + hyp_offset; + return false; +found: + *addr = *addr - stack_hyp.low + stack_kern.low; return true; } -static bool on_overflow_stack(unsigned long sp, unsigned long size, - struct stack_info *info) -{ - struct kvm_nvhe_stacktrace_info *stacktrace_info - = this_cpu_ptr_nvhe_sym(kvm_stacktrace_info); - unsigned long low = (unsigned long)stacktrace_info->overflow_stack_base; - unsigned long high = low + OVERFLOW_STACK_SIZE; - - return on_stack(sp, size, low, high, STACK_TYPE_OVERFLOW, info); -} - -static bool on_hyp_stack(unsigned long sp, unsigned long size, - struct stack_info *info) -{ - struct kvm_nvhe_stacktrace_info *stacktrace_info - = this_cpu_ptr_nvhe_sym(kvm_stacktrace_info); - unsigned long low = (unsigned long)stacktrace_info->stack_base; - unsigned long high = low + PAGE_SIZE; - - return on_stack(sp, size, low, high, STACK_TYPE_HYP, info); -} - -static bool on_accessible_stack(const struct task_struct *tsk, - unsigned long sp, unsigned long size, - struct stack_info *info) +/* + * Convert a KVN nVHE HYP frame record address to a kernel VA + */ +static bool kvm_nvhe_stack_kern_record_va(unsigned long *addr) { - if (info) - info->type = STACK_TYPE_UNKNOWN; - - return (on_overflow_stack(sp, size, info) || - on_hyp_stack(sp, size, info)); + return kvm_nvhe_stack_kern_va(addr, 16); } static int unwind_next(struct unwind_state *state) { - struct stack_info info; - - return unwind_next_common(state, &info, on_accessible_stack, - kvm_nvhe_stack_kern_va); + /* + * The FP is in the hypervisor VA space. Convert it to the kernel VA + * space so it can be unwound by the regular unwind functions. + */ + if (!kvm_nvhe_stack_kern_record_va(&state->fp)) + return -EINVAL; + + return unwind_next_frame_record(state); } static void unwind(struct unwind_state *state, @@ -158,7 +178,14 @@ static void kvm_nvhe_dump_backtrace_end(void) static void hyp_dump_backtrace(unsigned long hyp_offset) { struct kvm_nvhe_stacktrace_info *stacktrace_info; - struct unwind_state state; + struct stack_info stacks[] = { + stackinfo_get_overflow_kern_va(), + stackinfo_get_hyp_kern_va(), + }; + struct unwind_state state = { + .stacks = stacks, + .nr_stacks = ARRAY_SIZE(stacks), + }; stacktrace_info = this_cpu_ptr_nvhe_sym(kvm_stacktrace_info); diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c index 3234f50b8c4b..2ef1121ab844 100644 --- a/arch/arm64/kvm/sys_regs.c +++ b/arch/arm64/kvm/sys_regs.c @@ -273,7 +273,7 @@ static bool trap_loregion(struct kvm_vcpu *vcpu, u64 val = read_sanitised_ftr_reg(SYS_ID_AA64MMFR1_EL1); u32 sr = reg_to_encoding(r); - if (!(val & (0xfUL << ID_AA64MMFR1_LOR_SHIFT))) { + if (!(val & (0xfUL << ID_AA64MMFR1_EL1_LO_SHIFT))) { kvm_inject_undefined(vcpu); return false; } @@ -1077,22 +1077,22 @@ static u64 read_id_reg(const struct kvm_vcpu *vcpu, switch (id) { case SYS_ID_AA64PFR0_EL1: if (!vcpu_has_sve(vcpu)) - val &= ~ARM64_FEATURE_MASK(ID_AA64PFR0_SVE); - val &= ~ARM64_FEATURE_MASK(ID_AA64PFR0_AMU); - val &= ~ARM64_FEATURE_MASK(ID_AA64PFR0_CSV2); - val |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_CSV2), (u64)vcpu->kvm->arch.pfr0_csv2); - val &= ~ARM64_FEATURE_MASK(ID_AA64PFR0_CSV3); - val |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_CSV3), (u64)vcpu->kvm->arch.pfr0_csv3); + val &= ~ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_SVE); + val &= ~ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_AMU); + val &= ~ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV2); + val |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV2), (u64)vcpu->kvm->arch.pfr0_csv2); + val &= ~ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV3); + val |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV3), (u64)vcpu->kvm->arch.pfr0_csv3); if (kvm_vgic_global_state.type == VGIC_V3) { - val &= ~ARM64_FEATURE_MASK(ID_AA64PFR0_GIC); - val |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_GIC), 1); + val &= ~ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_GIC); + val |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_GIC), 1); } break; case SYS_ID_AA64PFR1_EL1: if (!kvm_has_mte(vcpu->kvm)) - val &= ~ARM64_FEATURE_MASK(ID_AA64PFR1_MTE); + val &= ~ARM64_FEATURE_MASK(ID_AA64PFR1_EL1_MTE); - val &= ~ARM64_FEATURE_MASK(ID_AA64PFR1_SME); + val &= ~ARM64_FEATURE_MASK(ID_AA64PFR1_EL1_SME); break; case SYS_ID_AA64ISAR1_EL1: if (!vcpu_has_ptrauth(vcpu)) @@ -1110,14 +1110,14 @@ static u64 read_id_reg(const struct kvm_vcpu *vcpu, break; case SYS_ID_AA64DFR0_EL1: /* Limit debug to ARMv8.0 */ - val &= ~ARM64_FEATURE_MASK(ID_AA64DFR0_DEBUGVER); - val |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64DFR0_DEBUGVER), 6); + val &= ~ARM64_FEATURE_MASK(ID_AA64DFR0_EL1_DebugVer); + val |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64DFR0_EL1_DebugVer), 6); /* Limit guests to PMUv3 for ARMv8.4 */ val = cpuid_feature_cap_perfmon_field(val, - ID_AA64DFR0_PMUVER_SHIFT, - kvm_vcpu_has_pmu(vcpu) ? ID_AA64DFR0_PMUVER_8_4 : 0); + ID_AA64DFR0_EL1_PMUVer_SHIFT, + kvm_vcpu_has_pmu(vcpu) ? ID_AA64DFR0_EL1_PMUVer_V3P4 : 0); /* Hide SPE from guests */ - val &= ~ARM64_FEATURE_MASK(ID_AA64DFR0_PMSVER); + val &= ~ARM64_FEATURE_MASK(ID_AA64DFR0_EL1_PMSVer); break; case SYS_ID_DFR0_EL1: /* Limit guests to PMUv3 for ARMv8.4 */ @@ -1196,21 +1196,21 @@ static int set_id_aa64pfr0_el1(struct kvm_vcpu *vcpu, * it doesn't promise more than what is actually provided (the * guest could otherwise be covered in ectoplasmic residue). */ - csv2 = cpuid_feature_extract_unsigned_field(val, ID_AA64PFR0_CSV2_SHIFT); + csv2 = cpuid_feature_extract_unsigned_field(val, ID_AA64PFR0_EL1_CSV2_SHIFT); if (csv2 > 1 || (csv2 && arm64_get_spectre_v2_state() != SPECTRE_UNAFFECTED)) return -EINVAL; /* Same thing for CSV3 */ - csv3 = cpuid_feature_extract_unsigned_field(val, ID_AA64PFR0_CSV3_SHIFT); + csv3 = cpuid_feature_extract_unsigned_field(val, ID_AA64PFR0_EL1_CSV3_SHIFT); if (csv3 > 1 || (csv3 && arm64_get_meltdown_state() != SPECTRE_UNAFFECTED)) return -EINVAL; /* We can only differ with CSV[23], and anything else is an error */ val ^= read_id_reg(vcpu, rd, false); - val &= ~((0xFUL << ID_AA64PFR0_CSV2_SHIFT) | - (0xFUL << ID_AA64PFR0_CSV3_SHIFT)); + val &= ~((0xFUL << ID_AA64PFR0_EL1_CSV2_SHIFT) | + (0xFUL << ID_AA64PFR0_EL1_CSV3_SHIFT)); if (val) return -EINVAL; @@ -1825,11 +1825,11 @@ static bool trap_dbgdidr(struct kvm_vcpu *vcpu, } else { u64 dfr = read_sanitised_ftr_reg(SYS_ID_AA64DFR0_EL1); u64 pfr = read_sanitised_ftr_reg(SYS_ID_AA64PFR0_EL1); - u32 el3 = !!cpuid_feature_extract_unsigned_field(pfr, ID_AA64PFR0_EL3_SHIFT); + u32 el3 = !!cpuid_feature_extract_unsigned_field(pfr, ID_AA64PFR0_EL1_EL3_SHIFT); - p->regval = ((((dfr >> ID_AA64DFR0_WRPS_SHIFT) & 0xf) << 28) | - (((dfr >> ID_AA64DFR0_BRPS_SHIFT) & 0xf) << 24) | - (((dfr >> ID_AA64DFR0_CTX_CMPS_SHIFT) & 0xf) << 20) + p->regval = ((((dfr >> ID_AA64DFR0_EL1_WRPs_SHIFT) & 0xf) << 28) | + (((dfr >> ID_AA64DFR0_EL1_BRPs_SHIFT) & 0xf) << 24) | + (((dfr >> ID_AA64DFR0_EL1_CTX_CMPs_SHIFT) & 0xf) << 20) | (6 << 16) | (1 << 15) | (el3 << 14) | (el3 << 12)); return true; } diff --git a/arch/arm64/kvm/va_layout.c b/arch/arm64/kvm/va_layout.c index acdb7b3cc97d..91b22a014610 100644 --- a/arch/arm64/kvm/va_layout.c +++ b/arch/arm64/kvm/va_layout.c @@ -169,7 +169,7 @@ void __init kvm_update_va_mask(struct alt_instr *alt, * dictates it and we don't have any spare bits in the * address), NOP everything after masking the kernel VA. */ - if (has_vhe() || (!tag_val && i > 0)) { + if (cpus_have_cap(ARM64_HAS_VIRT_HOST_EXTN) || (!tag_val && i > 0)) { updptr[i] = cpu_to_le32(aarch64_insn_gen_nop()); continue; } @@ -193,7 +193,8 @@ void kvm_patch_vector_branch(struct alt_instr *alt, BUG_ON(nr_inst != 4); - if (!cpus_have_const_cap(ARM64_SPECTRE_V3A) || WARN_ON_ONCE(has_vhe())) + if (!cpus_have_cap(ARM64_SPECTRE_V3A) || + WARN_ON_ONCE(cpus_have_cap(ARM64_HAS_VIRT_HOST_EXTN))) return; /* diff --git a/arch/arm64/mm/context.c b/arch/arm64/mm/context.c index b8b4cf0bcf39..e1e0dca01839 100644 --- a/arch/arm64/mm/context.c +++ b/arch/arm64/mm/context.c @@ -43,17 +43,17 @@ static u32 get_cpu_asid_bits(void) { u32 asid; int fld = cpuid_feature_extract_unsigned_field(read_cpuid(ID_AA64MMFR0_EL1), - ID_AA64MMFR0_ASID_SHIFT); + ID_AA64MMFR0_EL1_ASIDBITS_SHIFT); switch (fld) { default: pr_warn("CPU%d: Unknown ASID size (%d); assuming 8-bit\n", smp_processor_id(), fld); fallthrough; - case ID_AA64MMFR0_ASID_8: + case ID_AA64MMFR0_EL1_ASIDBITS_8: asid = 8; break; - case ID_AA64MMFR0_ASID_16: + case ID_AA64MMFR0_EL1_ASIDBITS_16: asid = 16; } diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c index 599cf81f5685..83a512a6ff0d 100644 --- a/arch/arm64/mm/dma-mapping.c +++ b/arch/arm64/mm/dma-mapping.c @@ -36,7 +36,7 @@ void arch_dma_prep_coherent(struct page *page, size_t size) { unsigned long start = (unsigned long)page_address(page); - dcache_clean_inval_poc(start, start + size); + dcache_clean_poc(start, start + size); } #ifdef CONFIG_IOMMU_DMA diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c index c33f1fad2745..5b391490e045 100644 --- a/arch/arm64/mm/fault.c +++ b/arch/arm64/mm/fault.c @@ -691,6 +691,9 @@ static int __kprobes do_translation_fault(unsigned long far, static int do_alignment_fault(unsigned long far, unsigned long esr, struct pt_regs *regs) { + if (IS_ENABLED(CONFIG_COMPAT_ALIGNMENT_FIXUPS) && + compat_user_mode(regs)) + return do_compat_alignment_fixup(far, regs); do_bad_area(far, esr, regs); return 0; } diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c index b9af30be813e..4b4651ee47f2 100644 --- a/arch/arm64/mm/init.c +++ b/arch/arm64/mm/init.c @@ -360,7 +360,7 @@ void __init arm64_memblock_init(void) extern u16 memstart_offset_seed; u64 mmfr0 = read_cpuid(ID_AA64MMFR0_EL1); int parange = cpuid_feature_extract_unsigned_field( - mmfr0, ID_AA64MMFR0_PARANGE_SHIFT); + mmfr0, ID_AA64MMFR0_EL1_PARANGE_SHIFT); s64 range = linear_region_size - BIT(id_aa64mmfr0_parange_to_phys_shift(parange)); diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c index e7ad44585f40..9a7c38965154 100644 --- a/arch/arm64/mm/mmu.c +++ b/arch/arm64/mm/mmu.c @@ -331,12 +331,6 @@ static void alloc_init_pud(pgd_t *pgdp, unsigned long addr, unsigned long end, } BUG_ON(p4d_bad(p4d)); - /* - * No need for locking during early boot. And it doesn't work as - * expected with KASLR enabled. - */ - if (system_state != SYSTEM_BOOTING) - mutex_lock(&fixmap_lock); pudp = pud_set_fixmap_offset(p4dp, addr); do { pud_t old_pud = READ_ONCE(*pudp); @@ -368,15 +362,13 @@ static void alloc_init_pud(pgd_t *pgdp, unsigned long addr, unsigned long end, } while (pudp++, addr = next, addr != end); pud_clear_fixmap(); - if (system_state != SYSTEM_BOOTING) - mutex_unlock(&fixmap_lock); } -static void __create_pgd_mapping(pgd_t *pgdir, phys_addr_t phys, - unsigned long virt, phys_addr_t size, - pgprot_t prot, - phys_addr_t (*pgtable_alloc)(int), - int flags) +static void __create_pgd_mapping_locked(pgd_t *pgdir, phys_addr_t phys, + unsigned long virt, phys_addr_t size, + pgprot_t prot, + phys_addr_t (*pgtable_alloc)(int), + int flags) { unsigned long addr, end, next; pgd_t *pgdp = pgd_offset_pgd(pgdir, virt); @@ -400,8 +392,20 @@ static void __create_pgd_mapping(pgd_t *pgdir, phys_addr_t phys, } while (pgdp++, addr = next, addr != end); } +static void __create_pgd_mapping(pgd_t *pgdir, phys_addr_t phys, + unsigned long virt, phys_addr_t size, + pgprot_t prot, + phys_addr_t (*pgtable_alloc)(int), + int flags) +{ + mutex_lock(&fixmap_lock); + __create_pgd_mapping_locked(pgdir, phys, virt, size, prot, + pgtable_alloc, flags); + mutex_unlock(&fixmap_lock); +} + #ifdef CONFIG_UNMAP_KERNEL_AT_EL0 -extern __alias(__create_pgd_mapping) +extern __alias(__create_pgd_mapping_locked) void create_kpti_ng_temp_pgd(pgd_t *pgdir, phys_addr_t phys, unsigned long virt, phys_addr_t size, pgprot_t prot, phys_addr_t (*pgtable_alloc)(int), int flags); @@ -535,7 +539,7 @@ static void __init map_mem(pgd_t *pgdp) */ BUILD_BUG_ON(pgd_index(direct_map_end - 1) == pgd_index(direct_map_end)); - if (can_set_direct_map() || IS_ENABLED(CONFIG_KFENCE)) + if (can_set_direct_map()) flags |= NO_BLOCK_MAPPINGS | NO_CONT_MAPPINGS; /* @@ -686,7 +690,7 @@ static bool arm64_early_this_cpu_has_bti(void) pfr1 = __read_sysreg_by_encoding(SYS_ID_AA64PFR1_EL1); return cpuid_feature_extract_unsigned_field(pfr1, - ID_AA64PFR1_BT_SHIFT); + ID_AA64PFR1_EL1_BT_SHIFT); } /* @@ -1180,14 +1184,6 @@ static void free_empty_tables(unsigned long addr, unsigned long end, } #endif -#if !ARM64_KERNEL_USES_PMD_MAPS -int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node, - struct vmem_altmap *altmap) -{ - WARN_ON((start < VMEMMAP_START) || (end > VMEMMAP_END)); - return vmemmap_populate_basepages(start, end, node, altmap); -} -#else /* !ARM64_KERNEL_USES_PMD_MAPS */ int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node, struct vmem_altmap *altmap) { @@ -1199,6 +1195,10 @@ int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node, pmd_t *pmdp; WARN_ON((start < VMEMMAP_START) || (end > VMEMMAP_END)); + + if (!ARM64_KERNEL_USES_PMD_MAPS) + return vmemmap_populate_basepages(start, end, node, altmap); + do { next = pmd_addr_end(addr, end); @@ -1232,7 +1232,6 @@ int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node, return 0; } -#endif /* !ARM64_KERNEL_USES_PMD_MAPS */ #ifdef CONFIG_MEMORY_HOTPLUG void vmemmap_free(unsigned long start, unsigned long end, @@ -1547,11 +1546,7 @@ int arch_add_memory(int nid, u64 start, u64 size, VM_BUG_ON(!mhp_range_allowed(start, size, true)); - /* - * KFENCE requires linear map to be mapped at page granularity, so that - * it is possible to protect/unprotect single pages in the KFENCE pool. - */ - if (can_set_direct_map() || IS_ENABLED(CONFIG_KFENCE)) + if (can_set_direct_map()) flags |= NO_BLOCK_MAPPINGS | NO_CONT_MAPPINGS; __create_pgd_mapping(swapper_pg_dir, start, __phys_to_virt(start), diff --git a/arch/arm64/mm/pageattr.c b/arch/arm64/mm/pageattr.c index 64e985eaa52d..d107c3d434e2 100644 --- a/arch/arm64/mm/pageattr.c +++ b/arch/arm64/mm/pageattr.c @@ -21,7 +21,13 @@ bool rodata_full __ro_after_init = IS_ENABLED(CONFIG_RODATA_FULL_DEFAULT_ENABLED bool can_set_direct_map(void) { - return rodata_full || debug_pagealloc_enabled(); + /* + * rodata_full, DEBUG_PAGEALLOC and KFENCE require linear map to be + * mapped at page granularity, so that it is possible to + * protect/unprotect single pages. + */ + return rodata_full || debug_pagealloc_enabled() || + IS_ENABLED(CONFIG_KFENCE); } static int change_page_range(pte_t *ptep, unsigned long addr, void *data) diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S index 7837a69524c5..b9ecbbae1e1a 100644 --- a/arch/arm64/mm/proc.S +++ b/arch/arm64/mm/proc.S @@ -10,6 +10,7 @@ #include <linux/init.h> #include <linux/linkage.h> #include <linux/pgtable.h> +#include <linux/cfi_types.h> #include <asm/assembler.h> #include <asm/asm-offsets.h> #include <asm/asm_pointer_auth.h> @@ -48,17 +49,19 @@ #ifdef CONFIG_KASAN_HW_TAGS #define TCR_MTE_FLAGS TCR_TCMA1 | TCR_TBI1 | TCR_TBID1 -#else +#elif defined(CONFIG_ARM64_MTE) /* * The mte_zero_clear_page_tags() implementation uses DC GZVA, which relies on * TBI being enabled at EL1. */ #define TCR_MTE_FLAGS TCR_TBI1 | TCR_TBID1 +#else +#define TCR_MTE_FLAGS 0 #endif /* * Default MAIR_EL1. MT_NORMAL_TAGGED is initially mapped as Normal memory and - * changed during __cpu_setup to Normal Tagged if the system supports MTE. + * changed during mte_cpu_setup to Normal Tagged if the system supports MTE. */ #define MAIR_EL1_SET \ (MAIR_ATTRIDX(MAIR_ATTR_DEVICE_nGnRnE, MT_DEVICE_nGnRnE) | \ @@ -185,7 +188,7 @@ SYM_FUNC_END(cpu_do_resume) * This is the low-level counterpart to cpu_replace_ttbr1, and should not be * called by anything else. It can only be executed from a TTBR0 mapping. */ -SYM_FUNC_START(idmap_cpu_replace_ttbr1) +SYM_TYPED_FUNC_START(idmap_cpu_replace_ttbr1) save_and_disable_daif flags=x2 __idmap_cpu_set_reserved_ttbr1 x1, x3 @@ -253,7 +256,7 @@ SYM_FUNC_END(idmap_cpu_replace_ttbr1) SYM_DATA(__idmap_kpti_flag, .long 1) .popsection -SYM_FUNC_START(idmap_kpti_install_ng_mappings) +SYM_TYPED_FUNC_START(idmap_kpti_install_ng_mappings) cpu .req w0 temp_pte .req x0 num_cpus .req w1 @@ -426,46 +429,8 @@ SYM_FUNC_START(__cpu_setup) mov_q mair, MAIR_EL1_SET mov_q tcr, TCR_TxSZ(VA_BITS) | TCR_CACHE_FLAGS | TCR_SMP_FLAGS | \ TCR_TG_FLAGS | TCR_KASLR_FLAGS | TCR_ASID16 | \ - TCR_TBI0 | TCR_A1 | TCR_KASAN_SW_FLAGS - -#ifdef CONFIG_ARM64_MTE - /* - * Update MAIR_EL1, GCR_EL1 and TFSR*_EL1 if MTE is supported - * (ID_AA64PFR1_EL1[11:8] > 1). - */ - mrs x10, ID_AA64PFR1_EL1 - ubfx x10, x10, #ID_AA64PFR1_MTE_SHIFT, #4 - cmp x10, #ID_AA64PFR1_MTE - b.lt 1f - - /* Normal Tagged memory type at the corresponding MAIR index */ - mov x10, #MAIR_ATTR_NORMAL_TAGGED - bfi mair, x10, #(8 * MT_NORMAL_TAGGED), #8 + TCR_TBI0 | TCR_A1 | TCR_KASAN_SW_FLAGS | TCR_MTE_FLAGS - mov x10, #KERNEL_GCR_EL1 - msr_s SYS_GCR_EL1, x10 - - /* - * If GCR_EL1.RRND=1 is implemented the same way as RRND=0, then - * RGSR_EL1.SEED must be non-zero for IRG to produce - * pseudorandom numbers. As RGSR_EL1 is UNKNOWN out of reset, we - * must initialize it. - */ - mrs x10, CNTVCT_EL0 - ands x10, x10, #SYS_RGSR_EL1_SEED_MASK - csinc x10, x10, xzr, ne - lsl x10, x10, #SYS_RGSR_EL1_SEED_SHIFT - msr_s SYS_RGSR_EL1, x10 - - /* clear any pending tag check faults in TFSR*_EL1 */ - msr_s SYS_TFSR_EL1, xzr - msr_s SYS_TFSRE0_EL1, xzr - - /* set the TCR_EL1 bits */ - mov_q x10, TCR_MTE_FLAGS - orr tcr, tcr, x10 -1: -#endif tcr_clear_errata_bits tcr, x9, x5 #ifdef CONFIG_ARM64_VA_BITS_52 diff --git a/arch/arm64/net/bpf_jit_comp.c b/arch/arm64/net/bpf_jit_comp.c index 389623ae5a91..30f76178608b 100644 --- a/arch/arm64/net/bpf_jit_comp.c +++ b/arch/arm64/net/bpf_jit_comp.c @@ -1970,7 +1970,7 @@ int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *image, u32 flags, struct bpf_tramp_links *tlinks, void *orig_call) { - int ret; + int i, ret; int nargs = m->nr_args; int max_insns = ((long)image_end - (long)image) / AARCH64_INSN_SIZE; struct jit_ctx ctx = { @@ -1982,6 +1982,12 @@ int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *image, if (nargs > 8) return -ENOTSUPP; + /* don't support struct argument */ + for (i = 0; i < MAX_BPF_FUNC_ARGS; i++) { + if (m->arg_flags[i] & BTF_FMODEL_STRUCT_ARG) + return -ENOTSUPP; + } + ret = prepare_trampoline(&ctx, im, tlinks, orig_call, nargs, flags); if (ret < 0) return ret; diff --git a/arch/arm64/tools/cpucaps b/arch/arm64/tools/cpucaps index 63b2484ce6c3..f1c0347ec31a 100644 --- a/arch/arm64/tools/cpucaps +++ b/arch/arm64/tools/cpucaps @@ -2,6 +2,8 @@ # # Internal CPU capabilities constants, keep this list sorted +ALWAYS_BOOT +ALWAYS_SYSTEM BTI # Unreliable: use system_supports_32bit_el0() instead. HAS_32BIT_EL0_DO_NOT_USE @@ -68,6 +70,7 @@ WORKAROUND_2038923 WORKAROUND_2064142 WORKAROUND_2077057 WORKAROUND_2457168 +WORKAROUND_2658417 WORKAROUND_TRBE_OVERWRITE_FILL_MODE WORKAROUND_TSB_FLUSH_FAILURE WORKAROUND_TRBE_WRITE_OUT_OF_RANGE diff --git a/arch/arm64/tools/sysreg b/arch/arm64/tools/sysreg index 9ae483ec1e56..7f1fb36f208c 100644 --- a/arch/arm64/tools/sysreg +++ b/arch/arm64/tools/sysreg @@ -46,6 +46,127 @@ # feature that introduces them (eg, FEAT_LS64_ACCDATA introduces enumeration # item ACCDATA) though it may be more taseful to do something else. +Sysreg ID_AA64PFR0_EL1 3 0 0 4 0 +Enum 63:60 CSV3 + 0b0000 NI + 0b0001 IMP +EndEnum +Enum 59:56 CSV2 + 0b0000 NI + 0b0001 IMP + 0b0010 CSV2_2 + 0b0011 CSV2_3 +EndEnum +Enum 55:52 RME + 0b0000 NI + 0b0001 IMP +EndEnum +Enum 51:48 DIT + 0b0000 NI + 0b0001 IMP +EndEnum +Enum 47:44 AMU + 0b0000 NI + 0b0001 IMP + 0b0010 V1P1 +EndEnum +Enum 43:40 MPAM + 0b0000 0 + 0b0001 1 +EndEnum +Enum 39:36 SEL2 + 0b0000 NI + 0b0001 IMP +EndEnum +Enum 35:32 SVE + 0b0000 NI + 0b0001 IMP +EndEnum +Enum 31:28 RAS + 0b0000 NI + 0b0001 IMP + 0b0010 V1P1 +EndEnum +Enum 27:24 GIC + 0b0000 NI + 0b0001 IMP + 0b0010 V4P1 +EndEnum +Enum 23:20 AdvSIMD + 0b0000 IMP + 0b0001 FP16 + 0b1111 NI +EndEnum +Enum 19:16 FP + 0b0000 IMP + 0b0001 FP16 + 0b1111 NI +EndEnum +Enum 15:12 EL3 + 0b0000 NI + 0b0001 IMP + 0b0010 AARCH32 +EndEnum +Enum 11:8 EL2 + 0b0000 NI + 0b0001 IMP + 0b0010 AARCH32 +EndEnum +Enum 7:4 EL1 + 0b0001 IMP + 0b0010 AARCH32 +EndEnum +Enum 3:0 EL0 + 0b0001 IMP + 0b0010 AARCH32 +EndEnum +EndSysreg + +Sysreg ID_AA64PFR1_EL1 3 0 0 4 1 +Res0 63:40 +Enum 39:36 NMI + 0b0000 NI + 0b0001 IMP +EndEnum +Enum 35:32 CSV2_frac + 0b0000 NI + 0b0001 CSV2_1p1 + 0b0010 CSV2_1p2 +EndEnum +Enum 31:28 RNDR_trap + 0b0000 NI + 0b0001 IMP +EndEnum +Enum 27:24 SME + 0b0000 NI + 0b0001 IMP +EndEnum +Res0 23:20 +Enum 19:16 MPAM_frac + 0b0000 MINOR_0 + 0b0001 MINOR_1 +EndEnum +Enum 15:12 RAS_frac + 0b0000 NI + 0b0001 RASv1p1 +EndEnum +Enum 11:8 MTE + 0b0000 NI + 0b0001 IMP + 0b0010 MTE2 + 0b0011 MTE3 +EndEnum +Enum 7:4 SSBS + 0b0000 NI + 0b0001 IMP + 0b0010 SSBS2 +EndEnum +Enum 3:0 BT + 0b0000 NI + 0b0001 IMP +EndEnum +EndSysreg + Sysreg ID_AA64ZFR0_EL1 3 0 0 4 4 Res0 63:60 Enum 59:56 F64MM @@ -98,7 +219,9 @@ Enum 63 FA64 0b1 IMP EndEnum Res0 62:60 -Field 59:56 SMEver +Enum 59:56 SMEver + 0b0000 IMP +EndEnum Enum 55:52 I16I64 0b0000 NI 0b1111 IMP @@ -129,6 +252,89 @@ EndEnum Res0 31:0 EndSysreg +Sysreg ID_AA64DFR0_EL1 3 0 0 5 0 +Enum 63:60 HPMN0 + 0b0000 UNPREDICTABLE + 0b0001 DEF +EndEnum +Res0 59:56 +Enum 55:52 BRBE + 0b0000 NI + 0b0001 IMP + 0b0010 BRBE_V1P1 +EndEnum +Enum 51:48 MTPMU + 0b0000 NI_IMPDEF + 0b0001 IMP + 0b1111 NI +EndEnum +Enum 47:44 TraceBuffer + 0b0000 NI + 0b0001 IMP +EndEnum +Enum 43:40 TraceFilt + 0b0000 NI + 0b0001 IMP +EndEnum +Enum 39:36 DoubleLock + 0b0000 IMP + 0b1111 NI +EndEnum +Enum 35:32 PMSVer + 0b0000 NI + 0b0001 IMP + 0b0010 V1P1 + 0b0011 V1P2 + 0b0100 V1P3 +EndEnum +Field 31:28 CTX_CMPs +Res0 27:24 +Field 23:20 WRPs +Res0 19:16 +Field 15:12 BRPs +Enum 11:8 PMUVer + 0b0000 NI + 0b0001 IMP + 0b0100 V3P1 + 0b0101 V3P4 + 0b0110 V3P5 + 0b0111 V3P7 + 0b1000 V3P8 + 0b1111 IMP_DEF +EndEnum +Enum 7:4 TraceVer + 0b0000 NI + 0b0001 IMP +EndEnum +Enum 3:0 DebugVer + 0b0110 IMP + 0b0111 VHE + 0b1000 V8P2 + 0b1001 V8P4 + 0b1010 V8P8 +EndEnum +EndSysreg + +Sysreg ID_AA64DFR1_EL1 3 0 0 5 1 +Res0 63:0 +EndSysreg + +Sysreg ID_AA64AFR0_EL1 3 0 0 5 4 +Res0 63:32 +Field 31:28 IMPDEF7 +Field 27:24 IMPDEF6 +Field 23:20 IMPDEF5 +Field 19:16 IMPDEF4 +Field 15:12 IMPDEF3 +Field 11:8 IMPDEF2 +Field 7:4 IMPDEF1 +Field 3:0 IMPDEF0 +EndSysreg + +Sysreg ID_AA64AFR1_EL1 3 0 0 5 5 +Res0 63:0 +EndSysreg + Sysreg ID_AA64ISAR0_EL1 3 0 0 6 0 Enum 63:60 RNDR 0b0000 NI @@ -313,6 +519,217 @@ Enum 3:0 WFxT EndEnum EndSysreg +Sysreg ID_AA64MMFR0_EL1 3 0 0 7 0 +Enum 63:60 ECV + 0b0000 NI + 0b0001 IMP + 0b0010 CNTPOFF +EndEnum +Enum 59:56 FGT + 0b0000 NI + 0b0001 IMP +EndEnum +Res0 55:48 +Enum 47:44 EXS + 0b0000 NI + 0b0001 IMP +EndEnum +Enum 43:40 TGRAN4_2 + 0b0000 TGRAN4 + 0b0001 NI + 0b0010 IMP + 0b0011 52_BIT +EndEnum +Enum 39:36 TGRAN64_2 + 0b0000 TGRAN64 + 0b0001 NI + 0b0010 IMP +EndEnum +Enum 35:32 TGRAN16_2 + 0b0000 TGRAN16 + 0b0001 NI + 0b0010 IMP + 0b0011 52_BIT +EndEnum +Enum 31:28 TGRAN4 + 0b0000 IMP + 0b0001 52_BIT + 0b1111 NI +EndEnum +Enum 27:24 TGRAN64 + 0b0000 IMP + 0b1111 NI +EndEnum +Enum 23:20 TGRAN16 + 0b0000 NI + 0b0001 IMP + 0b0010 52_BIT +EndEnum +Enum 19:16 BIGENDEL0 + 0b0000 NI + 0b0001 IMP +EndEnum +Enum 15:12 SNSMEM + 0b0000 NI + 0b0001 IMP +EndEnum +Enum 11:8 BIGEND + 0b0000 NI + 0b0001 IMP +EndEnum +Enum 7:4 ASIDBITS + 0b0000 8 + 0b0010 16 +EndEnum +Enum 3:0 PARANGE + 0b0000 32 + 0b0001 36 + 0b0010 40 + 0b0011 42 + 0b0100 44 + 0b0101 48 + 0b0110 52 +EndEnum +EndSysreg + +Sysreg ID_AA64MMFR1_EL1 3 0 0 7 1 +Enum 63:60 ECBHB + 0b0000 NI + 0b0001 IMP +EndEnum +Enum 59:56 CMOW + 0b0000 NI + 0b0001 IMP +EndEnum +Enum 55:52 TIDCP1 + 0b0000 NI + 0b0001 IMP +EndEnum +Enum 51:48 nTLBPA + 0b0000 NI + 0b0001 IMP +EndEnum +Enum 47:44 AFP + 0b0000 NI + 0b0001 IMP +EndEnum +Enum 43:40 HCX + 0b0000 NI + 0b0001 IMP +EndEnum +Enum 39:36 ETS + 0b0000 NI + 0b0001 IMP +EndEnum +Enum 35:32 TWED + 0b0000 NI + 0b0001 IMP +EndEnum +Enum 31:28 XNX + 0b0000 NI + 0b0001 IMP +EndEnum +Enum 27:24 SpecSEI + 0b0000 NI + 0b0001 IMP +EndEnum +Enum 23:20 PAN + 0b0000 NI + 0b0001 IMP + 0b0010 PAN2 + 0b0011 PAN3 +EndEnum +Enum 19:16 LO + 0b0000 NI + 0b0001 IMP +EndEnum +Enum 15:12 HPDS + 0b0000 NI + 0b0001 IMP + 0b0010 HPDS2 +EndEnum +Enum 11:8 VH + 0b0000 NI + 0b0001 IMP +EndEnum +Enum 7:4 VMIDBits + 0b0000 8 + 0b0010 16 +EndEnum +Enum 3:0 HAFDBS + 0b0000 NI + 0b0001 AF + 0b0010 DBM +EndEnum +EndSysreg + +Sysreg ID_AA64MMFR2_EL1 3 0 0 7 2 +Enum 63:60 E0PD + 0b0000 NI + 0b0001 IMP +EndEnum +Enum 59:56 EVT + 0b0000 NI + 0b0001 IMP + 0b0010 TTLBxS +EndEnum +Enum 55:52 BBM + 0b0000 0 + 0b0001 1 + 0b0010 2 +EndEnum +Enum 51:48 TTL + 0b0000 NI + 0b0001 IMP +EndEnum +Res0 47:44 +Enum 43:40 FWB + 0b0000 NI + 0b0001 IMP +EndEnum +Enum 39:36 IDS + 0b0000 0x0 + 0b0001 0x18 +EndEnum +Enum 35:32 AT + 0b0000 NI + 0b0001 IMP +EndEnum +Enum 31:28 ST + 0b0000 39 + 0b0001 48_47 +EndEnum +Enum 27:24 NV + 0b0000 NI + 0b0001 IMP + 0b0010 NV2 +EndEnum +Enum 23:20 CCIDX + 0b0000 32 + 0b0001 64 +EndEnum +Enum 19:16 VARange + 0b0000 48 + 0b0001 52 +EndEnum +Enum 15:12 IESB + 0b0000 NI + 0b0001 IMP +EndEnum +Enum 11:8 LSM + 0b0000 NI + 0b0001 IMP +EndEnum +Enum 7:4 UAO + 0b0000 NI + 0b0001 IMP +EndEnum +Enum 3:0 CnP + 0b0000 NI + 0b0001 IMP +EndEnum +EndSysreg + Sysreg SCTLR_EL1 3 0 1 0 0 Field 63 TIDCP Field 62 SPINMASK @@ -427,6 +844,12 @@ Sysreg SMCR_EL1 3 0 1 2 6 Fields SMCR_ELx EndSysreg +Sysreg ALLINT 3 0 4 3 0 +Res0 63:14 +Field 13 ALLINT +Res0 12:0 +EndSysreg + Sysreg FAR_EL1 3 0 6 0 0 Field 63:0 ADDR EndSysreg @@ -440,6 +863,14 @@ Sysreg CONTEXTIDR_EL1 3 0 13 0 1 Fields CONTEXTIDR_ELx EndSysreg +Sysreg TPIDR_EL1 3 0 13 0 4 +Field 63:0 ThreadID +EndSysreg + +Sysreg SCXTNUM_EL1 3 0 13 0 7 +Field 63:0 SoftwareContextNumber +EndSysreg + Sysreg CLIDR_EL1 3 1 0 0 1 Res0 63:47 Field 46:33 Ttypen @@ -514,6 +945,22 @@ Sysreg ZCR_EL2 3 4 1 2 0 Fields ZCR_ELx EndSysreg +Sysreg HCRX_EL2 3 4 1 2 2 +Res0 63:12 +Field 11 MSCEn +Field 10 MCE2 +Field 9 CMOW +Field 8 VFNMI +Field 7 VINMI +Field 6 TALLINT +Field 5 SMPME +Field 4 FGTnXS +Field 3 FnXS +Field 2 EnASR +Field 1 EnALS +Field 0 EnAS0 +EndSysreg + Sysreg SMPRIMAP_EL2 3 4 1 2 5 Field 63:60 P15 Field 59:56 P14 diff --git a/arch/hexagon/include/asm/io.h b/arch/hexagon/include/asm/io.h index c33241425a5c..46a099de85b7 100644 --- a/arch/hexagon/include/asm/io.h +++ b/arch/hexagon/include/asm/io.h @@ -308,6 +308,31 @@ static inline void outsl(unsigned long port, const void *buffer, int count) } } +/* + * These defines are necessary to use the generic io.h for filling in + * the missing parts of the API contract. This is because the platform + * uses (inline) functions rather than defines and the generic helper + * fills in the undefined. + */ +#define virt_to_phys virt_to_phys +#define phys_to_virt phys_to_virt +#define memset_io memset_io +#define memcpy_fromio memcpy_fromio +#define memcpy_toio memcpy_toio +#define readb readb +#define readw readw +#define readl readl +#define writeb writeb +#define writew writew +#define writel writel +#define insb insb +#define insw insw +#define insl insl +#define outsb outsb +#define outsw outsw +#define outsl outsl +#include <asm-generic/io.h> + #endif /* __KERNEL__ */ #endif diff --git a/arch/ia64/include/asm/termios.h b/arch/ia64/include/asm/termios.h deleted file mode 100644 index 589c026444cc..000000000000 --- a/arch/ia64/include/asm/termios.h +++ /dev/null @@ -1,58 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Modified 1999 - * David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co - * - * 99/01/28 Added N_IRDA and N_SMSBLOCK - */ -#ifndef _ASM_IA64_TERMIOS_H -#define _ASM_IA64_TERMIOS_H - -#include <uapi/asm/termios.h> - - -/* intr=^C quit=^\ erase=del kill=^U - eof=^D vtime=\0 vmin=\1 sxtc=\0 - start=^Q stop=^S susp=^Z eol=\0 - reprint=^R discard=^U werase=^W lnext=^V - eol2=\0 -*/ -#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" - -/* - * Translate a "termio" structure into a "termios". Ugh. - */ -#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \ - unsigned short __tmp; \ - get_user(__tmp,&(termio)->x); \ - *(unsigned short *) &(termios)->x = __tmp; \ -} - -#define user_termio_to_kernel_termios(termios, termio) \ -({ \ - SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \ - copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ -}) - -/* - * Translate a "termios" structure into a "termio". Ugh. - */ -#define kernel_termios_to_user_termio(termio, termios) \ -({ \ - put_user((termios)->c_iflag, &(termio)->c_iflag); \ - put_user((termios)->c_oflag, &(termio)->c_oflag); \ - put_user((termios)->c_cflag, &(termio)->c_cflag); \ - put_user((termios)->c_lflag, &(termio)->c_lflag); \ - put_user((termios)->c_line, &(termio)->c_line); \ - copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ -}) - -#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2)) -#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2)) -#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios)) -#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios)) - -#endif /* _ASM_IA64_TERMIOS_H */ diff --git a/arch/ia64/include/uapi/asm/termios.h b/arch/ia64/include/uapi/asm/termios.h deleted file mode 100644 index 199742d08f2c..000000000000 --- a/arch/ia64/include/uapi/asm/termios.h +++ /dev/null @@ -1,51 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * Modified 1999 - * David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co - * - * 99/01/28 Added N_IRDA and N_SMSBLOCK - */ -#ifndef _UAPI_ASM_IA64_TERMIOS_H -#define _UAPI_ASM_IA64_TERMIOS_H - - -#include <asm/termbits.h> -#include <asm/ioctls.h> - -struct winsize { - unsigned short ws_row; - unsigned short ws_col; - unsigned short ws_xpixel; - unsigned short ws_ypixel; -}; - -#define NCC 8 -struct termio { - unsigned short c_iflag; /* input mode flags */ - unsigned short c_oflag; /* output mode flags */ - unsigned short c_cflag; /* control mode flags */ - unsigned short c_lflag; /* local mode flags */ - unsigned char c_line; /* line discipline */ - unsigned char c_cc[NCC]; /* control characters */ -}; - -/* modem lines */ -#define TIOCM_LE 0x001 -#define TIOCM_DTR 0x002 -#define TIOCM_RTS 0x004 -#define TIOCM_ST 0x008 -#define TIOCM_SR 0x010 -#define TIOCM_CTS 0x020 -#define TIOCM_CAR 0x040 -#define TIOCM_RNG 0x080 -#define TIOCM_DSR 0x100 -#define TIOCM_CD TIOCM_CAR -#define TIOCM_RI TIOCM_RNG -#define TIOCM_OUT1 0x2000 -#define TIOCM_OUT2 0x4000 -#define TIOCM_LOOP 0x8000 - -/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ - - -#endif /* _UAPI_ASM_IA64_TERMIOS_H */ diff --git a/arch/ia64/mm/numa.c b/arch/ia64/mm/numa.c index d6579ec3ea32..4c7b1f50e3b7 100644 --- a/arch/ia64/mm/numa.c +++ b/arch/ia64/mm/numa.c @@ -75,5 +75,6 @@ int memory_add_physaddr_to_nid(u64 addr) return 0; return nid; } +EXPORT_SYMBOL(memory_add_physaddr_to_nid); #endif #endif diff --git a/arch/loongarch/Kconfig b/arch/loongarch/Kconfig index c7dd6ad779af..551dd99e98b8 100644 --- a/arch/loongarch/Kconfig +++ b/arch/loongarch/Kconfig @@ -10,7 +10,6 @@ config LOONGARCH select ARCH_ENABLE_MEMORY_HOTPLUG select ARCH_ENABLE_MEMORY_HOTREMOVE select ARCH_HAS_ACPI_TABLE_UPGRADE if ACPI - select ARCH_HAS_PHYS_TO_DMA select ARCH_HAS_PTE_SPECIAL select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST select ARCH_INLINE_READ_LOCK if !PREEMPTION diff --git a/arch/loongarch/include/asm/Kbuild b/arch/loongarch/include/asm/Kbuild index 83bc0681e72b..f2bcfcb4e311 100644 --- a/arch/loongarch/include/asm/Kbuild +++ b/arch/loongarch/include/asm/Kbuild @@ -21,7 +21,6 @@ generic-y += shmbuf.h generic-y += statfs.h generic-y += socket.h generic-y += sockios.h -generic-y += termios.h generic-y += termbits.h generic-y += poll.h generic-y += param.h diff --git a/arch/loongarch/include/asm/loongson.h b/arch/loongarch/include/asm/loongson.h index 6e8f6972ceb6..00db93edae1b 100644 --- a/arch/loongarch/include/asm/loongson.h +++ b/arch/loongarch/include/asm/loongson.h @@ -14,8 +14,6 @@ #include <asm/addrspace.h> #include <asm/bootinfo.h> -extern const struct plat_smp_ops loongson3_smp_ops; - #define LOONGSON_REG(x) \ (*(volatile u32 *)((char *)TO_UNCACHE(LOONGSON_REG_BASE) + (x))) diff --git a/arch/loongarch/kernel/dma.c b/arch/loongarch/kernel/dma.c index 8c9b5314a13e..7a9c6a9dd2d0 100644 --- a/arch/loongarch/kernel/dma.c +++ b/arch/loongarch/kernel/dma.c @@ -2,39 +2,29 @@ /* * Copyright (C) 2020-2022 Loongson Technology Corporation Limited */ -#include <linux/init.h> +#include <linux/acpi.h> #include <linux/dma-direct.h> -#include <linux/dma-mapping.h> -#include <linux/dma-map-ops.h> -#include <linux/swiotlb.h> -#include <asm/bootinfo.h> -#include <asm/dma.h> -#include <asm/loongson.h> - -/* - * We extract 4bit node id (bit 44~47) from Loongson-3's - * 48bit physical address space and embed it into 40bit. - */ - -static int node_id_offset; - -dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr) -{ - long nid = (paddr >> 44) & 0xf; - - return ((nid << 44) ^ paddr) | (nid << node_id_offset); -} - -phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr) +void acpi_arch_dma_setup(struct device *dev) { - long nid = (daddr >> node_id_offset) & 0xf; + int ret; + u64 mask, end = 0; + const struct bus_dma_region *map = NULL; + + ret = acpi_dma_get_range(dev, &map); + if (!ret && map) { + const struct bus_dma_region *r = map; + + for (end = 0; r->size; r++) { + if (r->dma_start + r->size - 1 > end) + end = r->dma_start + r->size - 1; + } + + mask = DMA_BIT_MASK(ilog2(end) + 1); + dev->bus_dma_limit = end; + dev->dma_range_map = map; + dev->coherent_dma_mask = min(dev->coherent_dma_mask, mask); + *dev->dma_mask = min(*dev->dma_mask, mask); + } - return ((nid << node_id_offset) ^ daddr) | (nid << 44); -} - -void __init plat_swiotlb_setup(void) -{ - swiotlb_init(true, SWIOTLB_VERBOSE); - node_id_offset = ((readl(LS7A_DMA_CFG) & LS7A_DMA_NODE_MASK) >> LS7A_DMA_NODE_SHF) + 36; } diff --git a/arch/loongarch/kernel/head.S b/arch/loongarch/kernel/head.S index c60eb66793e3..331864369e49 100644 --- a/arch/loongarch/kernel/head.S +++ b/arch/loongarch/kernel/head.S @@ -14,6 +14,8 @@ __REF + .align 12 + SYM_CODE_START(kernel_entry) # kernel entry point /* Config direct window and set PG */ diff --git a/arch/loongarch/kernel/setup.c b/arch/loongarch/kernel/setup.c index 8f5c2f9a1a83..d97c69dbe553 100644 --- a/arch/loongarch/kernel/setup.c +++ b/arch/loongarch/kernel/setup.c @@ -247,7 +247,7 @@ static void __init arch_mem_init(char **cmdline_p) sparse_init(); memblock_set_bottom_up(true); - plat_swiotlb_setup(); + swiotlb_init(true, SWIOTLB_VERBOSE); dma_contiguous_reserve(PFN_PHYS(max_low_pfn)); diff --git a/arch/loongarch/kernel/traps.c b/arch/loongarch/kernel/traps.c index aa1c95aaf595..5010e95cef84 100644 --- a/arch/loongarch/kernel/traps.c +++ b/arch/loongarch/kernel/traps.c @@ -461,11 +461,9 @@ asmlinkage void noinstr do_watch(struct pt_regs *regs) asmlinkage void noinstr do_ri(struct pt_regs *regs) { - int status = -1; + int status = SIGILL; unsigned int opcode = 0; unsigned int __user *era = (unsigned int __user *)exception_era(regs); - unsigned long old_era = regs->csr_era; - unsigned long old_ra = regs->regs[1]; irqentry_state_t state = irqentry_enter(regs); local_irq_enable(); @@ -477,21 +475,12 @@ asmlinkage void noinstr do_ri(struct pt_regs *regs) die_if_kernel("Reserved instruction in kernel code", regs); - compute_return_era(regs); - if (unlikely(get_user(opcode, era) < 0)) { status = SIGSEGV; current->thread.error_code = 1; } - if (status < 0) - status = SIGILL; - - if (unlikely(status > 0)) { - regs->csr_era = old_era; /* Undo skip-over. */ - regs->regs[1] = old_ra; - force_sig(status); - } + force_sig(status); out: local_irq_disable(); diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index b06faf6c0b27..7bff88118507 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -87,7 +87,7 @@ config MMU_SUN3 config KEXEC bool "kexec system call" - depends on M68KCLASSIC + depends on M68KCLASSIC && MMU select KEXEC_CORE help kexec is a system call that implements the ability to shutdown your diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig index a6a886a89be2..e2038d9499e4 100644 --- a/arch/m68k/configs/amiga_defconfig +++ b/arch/m68k/configs/amiga_defconfig @@ -84,7 +84,6 @@ CONFIG_NETFILTER=y CONFIG_NETFILTER_NETLINK_HOOK=m CONFIG_NF_CONNTRACK=m CONFIG_NF_CONNTRACK_ZONES=y -# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CONNTRACK_AMANDA=m CONFIG_NF_CONNTRACK_FTP=m @@ -573,9 +572,9 @@ CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m CONFIG_CRYPTO_KEYWRAP=m CONFIG_CRYPTO_ADIANTUM=m +CONFIG_CRYPTO_HCTR2=m CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_VMAC=m -CONFIG_CRYPTO_BLAKE2S=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD160=m @@ -594,6 +593,7 @@ CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_ARIA=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_SM4_GENERIC=m CONFIG_CRYPTO_TEA=m diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig index bffd24c2755e..ddd201259e43 100644 --- a/arch/m68k/configs/apollo_defconfig +++ b/arch/m68k/configs/apollo_defconfig @@ -80,7 +80,6 @@ CONFIG_NETFILTER=y CONFIG_NETFILTER_NETLINK_HOOK=m CONFIG_NF_CONNTRACK=m CONFIG_NF_CONNTRACK_ZONES=y -# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CONNTRACK_AMANDA=m CONFIG_NF_CONNTRACK_FTP=m @@ -530,9 +529,9 @@ CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m CONFIG_CRYPTO_KEYWRAP=m CONFIG_CRYPTO_ADIANTUM=m +CONFIG_CRYPTO_HCTR2=m CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_VMAC=m -CONFIG_CRYPTO_BLAKE2S=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD160=m @@ -551,6 +550,7 @@ CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_ARIA=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_SM4_GENERIC=m CONFIG_CRYPTO_TEA=m diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig index 0013425b1e08..d9f783707387 100644 --- a/arch/m68k/configs/atari_defconfig +++ b/arch/m68k/configs/atari_defconfig @@ -87,7 +87,6 @@ CONFIG_NETFILTER=y CONFIG_NETFILTER_NETLINK_HOOK=m CONFIG_NF_CONNTRACK=m CONFIG_NF_CONNTRACK_ZONES=y -# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CONNTRACK_AMANDA=m CONFIG_NF_CONNTRACK_FTP=m @@ -550,9 +549,9 @@ CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m CONFIG_CRYPTO_KEYWRAP=m CONFIG_CRYPTO_ADIANTUM=m +CONFIG_CRYPTO_HCTR2=m CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_VMAC=m -CONFIG_CRYPTO_BLAKE2S=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD160=m @@ -571,6 +570,7 @@ CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_ARIA=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_SM4_GENERIC=m CONFIG_CRYPTO_TEA=m diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig index 42d969697f7f..68957c6bcff1 100644 --- a/arch/m68k/configs/bvme6000_defconfig +++ b/arch/m68k/configs/bvme6000_defconfig @@ -77,7 +77,6 @@ CONFIG_NETFILTER=y CONFIG_NETFILTER_NETLINK_HOOK=m CONFIG_NF_CONNTRACK=m CONFIG_NF_CONNTRACK_ZONES=y -# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CONNTRACK_AMANDA=m CONFIG_NF_CONNTRACK_FTP=m @@ -522,9 +521,9 @@ CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m CONFIG_CRYPTO_KEYWRAP=m CONFIG_CRYPTO_ADIANTUM=m +CONFIG_CRYPTO_HCTR2=m CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_VMAC=m -CONFIG_CRYPTO_BLAKE2S=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD160=m @@ -543,6 +542,7 @@ CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_ARIA=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_SM4_GENERIC=m CONFIG_CRYPTO_TEA=m diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig index 97d6d9acb395..825c6a02fa9d 100644 --- a/arch/m68k/configs/hp300_defconfig +++ b/arch/m68k/configs/hp300_defconfig @@ -79,7 +79,6 @@ CONFIG_NETFILTER=y CONFIG_NETFILTER_NETLINK_HOOK=m CONFIG_NF_CONNTRACK=m CONFIG_NF_CONNTRACK_ZONES=y -# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CONNTRACK_AMANDA=m CONFIG_NF_CONNTRACK_FTP=m @@ -532,9 +531,9 @@ CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m CONFIG_CRYPTO_KEYWRAP=m CONFIG_CRYPTO_ADIANTUM=m +CONFIG_CRYPTO_HCTR2=m CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_VMAC=m -CONFIG_CRYPTO_BLAKE2S=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD160=m @@ -553,6 +552,7 @@ CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_ARIA=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_SM4_GENERIC=m CONFIG_CRYPTO_TEA=m diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig index 8cbfc1c659a3..17f64c562bf1 100644 --- a/arch/m68k/configs/mac_defconfig +++ b/arch/m68k/configs/mac_defconfig @@ -78,7 +78,6 @@ CONFIG_NETFILTER=y CONFIG_NETFILTER_NETLINK_HOOK=m CONFIG_NF_CONNTRACK=m CONFIG_NF_CONNTRACK_ZONES=y -# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CONNTRACK_AMANDA=m CONFIG_NF_CONNTRACK_FTP=m @@ -552,9 +551,9 @@ CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m CONFIG_CRYPTO_KEYWRAP=m CONFIG_CRYPTO_ADIANTUM=m +CONFIG_CRYPTO_HCTR2=m CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_VMAC=m -CONFIG_CRYPTO_BLAKE2S=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD160=m @@ -573,6 +572,7 @@ CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_ARIA=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_SM4_GENERIC=m CONFIG_CRYPTO_TEA=m diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig index 9f45fe60757f..f5f4c572b694 100644 --- a/arch/m68k/configs/multi_defconfig +++ b/arch/m68k/configs/multi_defconfig @@ -98,7 +98,6 @@ CONFIG_NETFILTER=y CONFIG_NETFILTER_NETLINK_HOOK=m CONFIG_NF_CONNTRACK=m CONFIG_NF_CONNTRACK_ZONES=y -# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CONNTRACK_AMANDA=m CONFIG_NF_CONNTRACK_FTP=m @@ -638,9 +637,9 @@ CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m CONFIG_CRYPTO_KEYWRAP=m CONFIG_CRYPTO_ADIANTUM=m +CONFIG_CRYPTO_HCTR2=m CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_VMAC=m -CONFIG_CRYPTO_BLAKE2S=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD160=m @@ -659,6 +658,7 @@ CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_ARIA=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_SM4_GENERIC=m CONFIG_CRYPTO_TEA=m diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig index 4736cfacf6a2..b4a0bbef7e39 100644 --- a/arch/m68k/configs/mvme147_defconfig +++ b/arch/m68k/configs/mvme147_defconfig @@ -76,7 +76,6 @@ CONFIG_NETFILTER=y CONFIG_NETFILTER_NETLINK_HOOK=m CONFIG_NF_CONNTRACK=m CONFIG_NF_CONNTRACK_ZONES=y -# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CONNTRACK_AMANDA=m CONFIG_NF_CONNTRACK_FTP=m @@ -521,9 +520,9 @@ CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m CONFIG_CRYPTO_KEYWRAP=m CONFIG_CRYPTO_ADIANTUM=m +CONFIG_CRYPTO_HCTR2=m CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_VMAC=m -CONFIG_CRYPTO_BLAKE2S=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD160=m @@ -542,6 +541,7 @@ CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_ARIA=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_SM4_GENERIC=m CONFIG_CRYPTO_TEA=m diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig index 638cd38aa7d2..c6a6d5926793 100644 --- a/arch/m68k/configs/mvme16x_defconfig +++ b/arch/m68k/configs/mvme16x_defconfig @@ -77,7 +77,6 @@ CONFIG_NETFILTER=y CONFIG_NETFILTER_NETLINK_HOOK=m CONFIG_NF_CONNTRACK=m CONFIG_NF_CONNTRACK_ZONES=y -# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CONNTRACK_AMANDA=m CONFIG_NF_CONNTRACK_FTP=m @@ -522,9 +521,9 @@ CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m CONFIG_CRYPTO_KEYWRAP=m CONFIG_CRYPTO_ADIANTUM=m +CONFIG_CRYPTO_HCTR2=m CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_VMAC=m -CONFIG_CRYPTO_BLAKE2S=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD160=m @@ -543,6 +542,7 @@ CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_ARIA=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_SM4_GENERIC=m CONFIG_CRYPTO_TEA=m diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig index ec8b6bb70ebd..49c9c89f0caf 100644 --- a/arch/m68k/configs/q40_defconfig +++ b/arch/m68k/configs/q40_defconfig @@ -78,7 +78,6 @@ CONFIG_NETFILTER=y CONFIG_NETFILTER_NETLINK_HOOK=m CONFIG_NF_CONNTRACK=m CONFIG_NF_CONNTRACK_ZONES=y -# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CONNTRACK_AMANDA=m CONFIG_NF_CONNTRACK_FTP=m @@ -539,9 +538,9 @@ CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m CONFIG_CRYPTO_KEYWRAP=m CONFIG_CRYPTO_ADIANTUM=m +CONFIG_CRYPTO_HCTR2=m CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_VMAC=m -CONFIG_CRYPTO_BLAKE2S=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD160=m @@ -560,6 +559,7 @@ CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_ARIA=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_SM4_GENERIC=m CONFIG_CRYPTO_TEA=m diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig index 7d8dc578d59c..9b44eeb9c07f 100644 --- a/arch/m68k/configs/sun3_defconfig +++ b/arch/m68k/configs/sun3_defconfig @@ -74,7 +74,6 @@ CONFIG_NETFILTER=y CONFIG_NETFILTER_NETLINK_HOOK=m CONFIG_NF_CONNTRACK=m CONFIG_NF_CONNTRACK_ZONES=y -# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CONNTRACK_AMANDA=m CONFIG_NF_CONNTRACK_FTP=m @@ -521,9 +520,9 @@ CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m CONFIG_CRYPTO_KEYWRAP=m CONFIG_CRYPTO_ADIANTUM=m +CONFIG_CRYPTO_HCTR2=m CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_VMAC=m -CONFIG_CRYPTO_BLAKE2S=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD160=m @@ -542,6 +541,7 @@ CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_ARIA=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_SM4_GENERIC=m CONFIG_CRYPTO_TEA=m diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig index 96290aee5302..d2ffb0a65b44 100644 --- a/arch/m68k/configs/sun3x_defconfig +++ b/arch/m68k/configs/sun3x_defconfig @@ -74,7 +74,6 @@ CONFIG_NETFILTER=y CONFIG_NETFILTER_NETLINK_HOOK=m CONFIG_NF_CONNTRACK=m CONFIG_NF_CONNTRACK_ZONES=y -# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CONNTRACK_AMANDA=m CONFIG_NF_CONNTRACK_FTP=m @@ -520,9 +519,9 @@ CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m CONFIG_CRYPTO_KEYWRAP=m CONFIG_CRYPTO_ADIANTUM=m +CONFIG_CRYPTO_HCTR2=m CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_VMAC=m -CONFIG_CRYPTO_BLAKE2S=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD160=m @@ -541,6 +540,7 @@ CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_ARIA=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_SM4_GENERIC=m CONFIG_CRYPTO_TEA=m diff --git a/arch/m68k/include/uapi/asm/bootinfo-virt.h b/arch/m68k/include/uapi/asm/bootinfo-virt.h index b091ee9b06e0..7dbcd7bec103 100644 --- a/arch/m68k/include/uapi/asm/bootinfo-virt.h +++ b/arch/m68k/include/uapi/asm/bootinfo-virt.h @@ -13,13 +13,8 @@ #define BI_VIRT_VIRTIO_BASE 0x8004 #define BI_VIRT_CTRL_BASE 0x8005 -/* - * A random seed used to initialize the RNG. Record format: - * - * - length [ 2 bytes, 16-bit big endian ] - * - seed data [ `length` bytes, padded to preserve 2-byte alignment ] - */ -#define BI_VIRT_RNG_SEED 0x8006 +/* No longer used -- replaced with BI_RNG_SEED -- but don't reuse this index: + * #define BI_VIRT_RNG_SEED 0x8006 */ #define VIRT_BOOTI_VERSION MK_BI_VERSION(2, 0) diff --git a/arch/m68k/include/uapi/asm/bootinfo.h b/arch/m68k/include/uapi/asm/bootinfo.h index 95ecf3ae4c49..024e87d7095f 100644 --- a/arch/m68k/include/uapi/asm/bootinfo.h +++ b/arch/m68k/include/uapi/asm/bootinfo.h @@ -64,6 +64,13 @@ struct mem_info { /* (struct mem_info) */ #define BI_COMMAND_LINE 0x0007 /* kernel command line parameters */ /* (string) */ +/* + * A random seed used to initialize the RNG. Record format: + * + * - length [ 2 bytes, 16-bit big endian ] + * - seed data [ `length` bytes, padded to preserve 4-byte struct alignment ] + */ +#define BI_RNG_SEED 0x0008 /* diff --git a/arch/m68k/kernel/setup_mm.c b/arch/m68k/kernel/setup_mm.c index e62fa8f2149b..3a2bb2e8fdad 100644 --- a/arch/m68k/kernel/setup_mm.c +++ b/arch/m68k/kernel/setup_mm.c @@ -25,6 +25,7 @@ #include <linux/module.h> #include <linux/nvram.h> #include <linux/initrd.h> +#include <linux/random.h> #include <asm/bootinfo.h> #include <asm/byteorder.h> @@ -109,10 +110,9 @@ extern void paging_init(void); static void __init m68k_parse_bootinfo(const struct bi_record *record) { + const struct bi_record *first_record = record; uint16_t tag; - save_bootinfo(record); - while ((tag = be16_to_cpu(record->tag)) != BI_LAST) { int unknown = 0; const void *data = record->data; @@ -148,10 +148,21 @@ static void __init m68k_parse_bootinfo(const struct bi_record *record) break; case BI_COMMAND_LINE: - strlcpy(m68k_command_line, data, + strscpy(m68k_command_line, data, sizeof(m68k_command_line)); break; + case BI_RNG_SEED: { + u16 len = be16_to_cpup(data); + add_bootloader_randomness(data + 2, len); + /* + * Zero the data to preserve forward secrecy, and zero the + * length to prevent kexec from using it. + */ + memzero_explicit((void *)data, len + 2); + break; + } + default: if (MACH_IS_AMIGA) unknown = amiga_parse_bootinfo(record); @@ -182,6 +193,8 @@ static void __init m68k_parse_bootinfo(const struct bi_record *record) record = (struct bi_record *)((unsigned long)record + size); } + save_bootinfo(first_record); + m68k_realnum_memory = m68k_num_memory; #ifdef CONFIG_SINGLE_MEMORY_CHUNK if (m68k_num_memory > 1) { diff --git a/arch/m68k/virt/config.c b/arch/m68k/virt/config.c index 4ab22946ff68..632ba200ad42 100644 --- a/arch/m68k/virt/config.c +++ b/arch/m68k/virt/config.c @@ -2,7 +2,6 @@ #include <linux/reboot.h> #include <linux/serial_core.h> -#include <linux/random.h> #include <clocksource/timer-goldfish.h> #include <asm/bootinfo.h> @@ -93,16 +92,6 @@ int __init virt_parse_bootinfo(const struct bi_record *record) data += 4; virt_bi_data.virtio.irq = be32_to_cpup(data); break; - case BI_VIRT_RNG_SEED: { - u16 len = be16_to_cpup(data); - add_bootloader_randomness(data + 2, len); - /* - * Zero the data to preserve forward secrecy, and zero the - * length to prevent kexec from using it. - */ - memzero_explicit((void *)data, len + 2); - break; - } default: unknown = 1; break; diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index ec21f8999249..25dd4c5a8ef5 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -2669,7 +2669,6 @@ config ARCH_FLATMEM_ENABLE config ARCH_SPARSEMEM_ENABLE bool - select SPARSEMEM_STATIC if !SGI_IP27 config NUMA bool "NUMA Support" diff --git a/arch/mips/bcm47xx/prom.c b/arch/mips/bcm47xx/prom.c index ab203e66ba0d..a9bea411d928 100644 --- a/arch/mips/bcm47xx/prom.c +++ b/arch/mips/bcm47xx/prom.c @@ -86,7 +86,7 @@ static __init void prom_init_mem(void) pr_debug("Assume 128MB RAM\n"); break; } - if (!memcmp(prom_init, prom_init + mem, 32)) + if (!memcmp((void *)prom_init, (void *)prom_init + mem, 32)) break; } lowmem = mem; @@ -159,7 +159,7 @@ void __init bcm47xx_prom_highmem_init(void) off = EXTVBASE + __pa(off); for (extmem = 128 << 20; extmem < 512 << 20; extmem <<= 1) { - if (!memcmp(prom_init, (void *)(off + extmem), 16)) + if (!memcmp((void *)prom_init, (void *)(off + extmem), 16)) break; } extmem -= lowmem; diff --git a/arch/mips/boot/dts/brcm/bcm63268.dtsi b/arch/mips/boot/dts/brcm/bcm63268.dtsi index c3ce49ec675f..8926417a8fbc 100644 --- a/arch/mips/boot/dts/brcm/bcm63268.dtsi +++ b/arch/mips/boot/dts/brcm/bcm63268.dtsi @@ -105,14 +105,20 @@ interrupts = <2>, <3>; }; - wdt: watchdog@1000009c { - compatible = "brcm,bcm7038-wdt"; - reg = <0x1000009c 0xc>; + timer-mfd@10000080 { + compatible = "brcm,bcm7038-twd", "simple-mfd", "syscon"; + reg = <0x10000080 0x30>; + ranges = <0x0 0x10000080 0x30>; - clocks = <&periph_osc>; - clock-names = "refclk"; + wdt: watchdog@1c { + compatible = "brcm,bcm7038-wdt"; + reg = <0x1c 0xc>; - timeout-sec = <30>; + clocks = <&periph_osc>; + clock-names = "refclk"; + + timeout-sec = <30>; + }; }; uart0: serial@10000180 { diff --git a/arch/mips/boot/dts/lantiq/Makefile b/arch/mips/boot/dts/lantiq/Makefile index f5dfc06242b9..ae6e3e21ebeb 100644 --- a/arch/mips/boot/dts/lantiq/Makefile +++ b/arch/mips/boot/dts/lantiq/Makefile @@ -1,4 +1,4 @@ # SPDX-License-Identifier: GPL-2.0 -dtb-$(CONFIG_DT_EASY50712) += easy50712.dtb +dtb-$(CONFIG_DT_EASY50712) += danube_easy50712.dtb obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y)) diff --git a/arch/mips/boot/dts/lantiq/easy50712.dts b/arch/mips/boot/dts/lantiq/danube_easy50712.dts index 1ce20b7d05cb..1ce20b7d05cb 100644 --- a/arch/mips/boot/dts/lantiq/easy50712.dts +++ b/arch/mips/boot/dts/lantiq/danube_easy50712.dts diff --git a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts index 24eebc5a85b1..0128bd8fa7ed 100644 --- a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts +++ b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts @@ -20,12 +20,6 @@ bootargs = "console=ttyS0,57600"; }; - palmbus: palmbus@1e000000 { - i2c@900 { - status = "okay"; - }; - }; - gpio-keys { compatible = "gpio-keys"; @@ -53,7 +47,7 @@ }; }; -&sdhci { +&mmc { status = "okay"; }; diff --git a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts index 34006e667780..7515555388ae 100644 --- a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts +++ b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts @@ -20,12 +20,6 @@ bootargs = "console=ttyS0,57600"; }; - palmbus: palmbus@1e000000 { - i2c@900 { - status = "okay"; - }; - }; - gpio-keys { compatible = "gpio-keys"; @@ -35,9 +29,45 @@ linux,code = <KEY_RESTART>; }; }; + + gpio-leds { + compatible = "gpio-leds"; + + ethblack-green { + label = "green:ethblack"; + gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + }; + + ethblue-green { + label = "green:ethblue"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + + ethyellow-green { + label = "green:ethyellow"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + }; + + ethyellow-orange { + label = "orange:ethyellow"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + }; + + power { + label = "green:power"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + system { + label = "green:system"; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + linux,default-trigger = "disk-activity"; + }; + }; }; -&sdhci { +&mmc { status = "okay"; }; @@ -83,12 +113,12 @@ &gmac1 { status = "okay"; - phy-handle = <ðphy7>; + phy-handle = <ðphy5>; }; &mdio { - ethphy7: ethernet-phy@7 { - reg = <7>; + ethphy5: ethernet-phy@5 { + reg = <5>; phy-mode = "rgmii-rxid"; }; }; diff --git a/arch/mips/boot/dts/ralink/mt7621.dtsi b/arch/mips/boot/dts/ralink/mt7621.dtsi index ee46ace0bcc1..f3f4c1f26e01 100644 --- a/arch/mips/boot/dts/ralink/mt7621.dtsi +++ b/arch/mips/boot/dts/ralink/mt7621.dtsi @@ -33,11 +33,6 @@ compatible = "mti,cpu-interrupt-controller"; }; - aliases { - serial0 = &uartlite; - }; - - mmc_fixed_3v3: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "mmc_power"; @@ -110,17 +105,16 @@ pinctrl-0 = <&i2c_pins>; }; - memc: syscon@5000 { + memc: memory-controller@5000 { compatible = "mediatek,mt7621-memc", "syscon"; reg = <0x5000 0x1000>; }; - uartlite: uartlite@c00 { + serial0: serial@c00 { compatible = "ns16550a"; reg = <0xc00 0x100>; clocks = <&sysc MT7621_CLK_UART1>; - clock-names = "uart1"; interrupt-parent = <&gic>; interrupts = <GIC_SHARED 26 IRQ_TYPE_LEVEL_HIGH>; @@ -236,7 +230,7 @@ }; }; - sdhci: sdhci@1e130000 { + mmc: mmc@1e130000 { status = "disabled"; compatible = "mediatek,mt7620-mmc"; @@ -262,8 +256,8 @@ interrupts = <GIC_SHARED 20 IRQ_TYPE_LEVEL_HIGH>; }; - xhci: xhci@1e1c0000 { - compatible = "mediatek,mt8173-xhci"; + usb: usb@1e1c0000 { + compatible = "mediatek,mt8173-xhci", "mediatek,mtk-xhci"; reg = <0x1e1c0000 0x1000 0x1e1d0700 0x0100>; reg-names = "mac", "ippc"; @@ -338,23 +332,22 @@ gmac1: mac@1 { compatible = "mediatek,eth-mac"; reg = <1>; - status = "off"; - phy-mode = "rgmii-rxid"; + status = "disabled"; + phy-mode = "rgmii"; }; mdio: mdio-bus { #address-cells = <1>; #size-cells = <0>; - switch0: switch0@0 { + switch0: switch@1f { compatible = "mediatek,mt7621"; - reg = <0>; + reg = <0x1f>; mediatek,mcm; resets = <&sysc MT7621_RST_MCM>; reset-names = "mcm"; interrupt-controller; #interrupt-cells = <1>; - interrupt-parent = <&gic>; interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>; ports { @@ -362,31 +355,31 @@ #size-cells = <0>; port@0 { - status = "off"; + status = "disabled"; reg = <0>; label = "lan0"; }; port@1 { - status = "off"; + status = "disabled"; reg = <1>; label = "lan1"; }; port@2 { - status = "off"; + status = "disabled"; reg = <2>; label = "lan2"; }; port@3 { - status = "off"; + status = "disabled"; reg = <3>; label = "lan3"; }; port@4 { - status = "off"; + status = "disabled"; reg = <4>; label = "lan4"; }; diff --git a/arch/mips/cavium-octeon/executive/cvmx-cmd-queue.c b/arch/mips/cavium-octeon/executive/cvmx-cmd-queue.c index bf13e35871b2..aa7bbf8d0df5 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-cmd-queue.c +++ b/arch/mips/cavium-octeon/executive/cvmx-cmd-queue.c @@ -57,14 +57,11 @@ EXPORT_SYMBOL_GPL(__cvmx_cmd_queue_state_ptr); static cvmx_cmd_queue_result_t __cvmx_cmd_queue_init_state_ptr(void) { char *alloc_name = "cvmx_cmd_queues"; -#if defined(CONFIG_CAVIUM_RESERVE32) && CONFIG_CAVIUM_RESERVE32 extern uint64_t octeon_reserve32_memory; -#endif if (likely(__cvmx_cmd_queue_state_ptr)) return CVMX_CMD_QUEUE_SUCCESS; -#if defined(CONFIG_CAVIUM_RESERVE32) && CONFIG_CAVIUM_RESERVE32 if (octeon_reserve32_memory) __cvmx_cmd_queue_state_ptr = cvmx_bootmem_alloc_named_range(sizeof(*__cvmx_cmd_queue_state_ptr), @@ -73,7 +70,6 @@ static cvmx_cmd_queue_result_t __cvmx_cmd_queue_init_state_ptr(void) (CONFIG_CAVIUM_RESERVE32 << 20) - 1, 128, alloc_name); else -#endif __cvmx_cmd_queue_state_ptr = cvmx_bootmem_alloc_named(sizeof(*__cvmx_cmd_queue_state_ptr), 128, diff --git a/arch/mips/cavium-octeon/oct_ilm.c b/arch/mips/cavium-octeon/oct_ilm.c index 6a4694538bb6..dc05262e85ff 100644 --- a/arch/mips/cavium-octeon/oct_ilm.c +++ b/arch/mips/cavium-octeon/oct_ilm.c @@ -28,7 +28,7 @@ struct latency_info { static struct latency_info li; static struct dentry *dir; -static int show_latency(struct seq_file *m, void *v) +static int oct_ilm_show(struct seq_file *m, void *v) { u64 cpuclk, avg, max, min; struct latency_info curr_li = li; @@ -43,18 +43,7 @@ static int show_latency(struct seq_file *m, void *v) curr_li.interrupt_cnt, avg, max, min); return 0; } - -static int oct_ilm_open(struct inode *inode, struct file *file) -{ - return single_open(file, show_latency, NULL); -} - -static const struct file_operations oct_ilm_ops = { - .open = oct_ilm_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; +DEFINE_SHOW_ATTRIBUTE(oct_ilm); static int reset_statistics(void *data, u64 value) { @@ -67,7 +56,7 @@ DEFINE_DEBUGFS_ATTRIBUTE(reset_statistics_ops, NULL, reset_statistics, "%llu\n") static void init_debugfs(void) { dir = debugfs_create_dir("oct_ilm", 0); - debugfs_create_file("statistics", 0222, dir, NULL, &oct_ilm_ops); + debugfs_create_file("statistics", 0222, dir, NULL, &oct_ilm_fops); debugfs_create_file("reset", 0222, dir, NULL, &reset_statistics_ops); } diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c index 9cb9ed44bcaf..fd8043f6ff8a 100644 --- a/arch/mips/cavium-octeon/octeon-irq.c +++ b/arch/mips/cavium-octeon/octeon-irq.c @@ -127,6 +127,16 @@ static void octeon_irq_free_cd(struct irq_domain *d, unsigned int irq) static int octeon_irq_force_ciu_mapping(struct irq_domain *domain, int irq, int line, int bit) { + struct device_node *of_node; + int ret; + + of_node = irq_domain_get_of_node(domain); + if (!of_node) + return -EINVAL; + ret = irq_alloc_desc_at(irq, of_node_to_nid(of_node)); + if (ret < 0) + return ret; + return irq_domain_associate(domain, irq, line << 6 | bit); } diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c index cbd83205518d..a71727f7a608 100644 --- a/arch/mips/cavium-octeon/setup.c +++ b/arch/mips/cavium-octeon/setup.c @@ -284,10 +284,8 @@ void octeon_crash_smp_send_stop(void) #endif /* CONFIG_KEXEC */ -#ifdef CONFIG_CAVIUM_RESERVE32 uint64_t octeon_reserve32_memory; EXPORT_SYMBOL(octeon_reserve32_memory); -#endif #ifdef CONFIG_KEXEC /* crashkernel cmdline parameter is parsed _after_ memory setup @@ -532,7 +530,7 @@ void octeon_user_io_init(void) /* Get the current settings for CP0_CVMMEMCTL_REG */ cvmmemctl.u64 = read_c0_cvmmemctl(); /* R/W If set, marked write-buffer entries time out the same - * as as other entries; if clear, marked write-buffer entries + * as other entries; if clear, marked write-buffer entries * use the maximum timeout. */ cvmmemctl.s.dismarkwblongto = 1; /* R/W If set, a merged store does not clear the write-buffer @@ -666,9 +664,6 @@ void __init prom_init(void) int i; u64 t; int argc; -#ifdef CONFIG_CAVIUM_RESERVE32 - int64_t addr = -1; -#endif /* * The bootloader passes a pointer to the boot descriptor in * $a3, this is available as fw_arg3. @@ -783,7 +778,7 @@ void __init prom_init(void) cvmx_write_csr(CVMX_LED_UDD_DATX(1), 0); cvmx_write_csr(CVMX_LED_EN, 1); } -#ifdef CONFIG_CAVIUM_RESERVE32 + /* * We need to temporarily allocate all memory in the reserve32 * region. This makes sure the kernel doesn't allocate this @@ -794,14 +789,16 @@ void __init prom_init(void) * Allocate memory for RESERVED32 aligned on 2MB boundary. This * is in case we later use hugetlb entries with it. */ - addr = cvmx_bootmem_phy_named_block_alloc(CONFIG_CAVIUM_RESERVE32 << 20, - 0, 0, 2 << 20, - "CAVIUM_RESERVE32", 0); - if (addr < 0) - pr_err("Failed to allocate CAVIUM_RESERVE32 memory area\n"); - else - octeon_reserve32_memory = addr; -#endif + if (CONFIG_CAVIUM_RESERVE32) { + int64_t addr = + cvmx_bootmem_phy_named_block_alloc(CONFIG_CAVIUM_RESERVE32 << 20, + 0, 0, 2 << 20, + "CAVIUM_RESERVE32", 0); + if (addr < 0) + pr_err("Failed to allocate CAVIUM_RESERVE32 memory area\n"); + else + octeon_reserve32_memory = addr; + } #ifdef CONFIG_CAVIUM_OCTEON_LOCK_L2 if (cvmx_read_csr(CVMX_L2D_FUS3) & (3ull << 34)) { @@ -1079,7 +1076,6 @@ void __init plat_mem_setup(void) cvmx_bootmem_unlock(); #endif /* CONFIG_CRASH_DUMP */ -#ifdef CONFIG_CAVIUM_RESERVE32 /* * Now that we've allocated the kernel memory it is safe to * free the reserved region. We free it here so that builtin @@ -1087,7 +1083,6 @@ void __init plat_mem_setup(void) */ if (octeon_reserve32_memory) cvmx_bootmem_free_named("CAVIUM_RESERVE32"); -#endif /* CONFIG_CAVIUM_RESERVE32 */ if (total == 0) panic("Unable to allocate memory from " diff --git a/arch/mips/configs/ar7_defconfig b/arch/mips/configs/ar7_defconfig index cf9c6329b807..ed4a6388791e 100644 --- a/arch/mips/configs/ar7_defconfig +++ b/arch/mips/configs/ar7_defconfig @@ -32,9 +32,6 @@ CONFIG_IP_ROUTE_MULTIPATH=y CONFIG_IP_ROUTE_VERBOSE=y CONFIG_IP_MROUTE=y CONFIG_SYN_COOKIES=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_DIAG is not set CONFIG_TCP_CONG_ADVANCED=y # CONFIG_TCP_CONG_BIC is not set @@ -117,7 +114,6 @@ CONFIG_JFFS2_SUMMARY=y CONFIG_JFFS2_COMPRESSION_OPTIONS=y CONFIG_SQUASHFS=y # CONFIG_CRYPTO_HW is not set -# CONFIG_ENABLE_MUST_CHECK is not set CONFIG_STRIP_ASM_SYMS=y CONFIG_DEBUG_FS=y CONFIG_CMDLINE_BOOL=y diff --git a/arch/mips/configs/ath25_defconfig b/arch/mips/configs/ath25_defconfig index 7143441f5476..afd1c16242e9 100644 --- a/arch/mips/configs/ath25_defconfig +++ b/arch/mips/configs/ath25_defconfig @@ -29,9 +29,6 @@ CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_IPV6 is not set CONFIG_CFG80211=m CONFIG_MAC80211=m @@ -108,7 +105,6 @@ CONFIG_SQUASHFS_XZ=y # CONFIG_XZ_DEC_ARMTHUMB is not set # CONFIG_XZ_DEC_SPARC is not set CONFIG_PRINTK_TIME=y -# CONFIG_ENABLE_MUST_CHECK is not set CONFIG_STRIP_ASM_SYMS=y CONFIG_DEBUG_FS=y # CONFIG_SCHED_DEBUG is not set diff --git a/arch/mips/configs/ath79_defconfig b/arch/mips/configs/ath79_defconfig index 96622a2ad333..0b741716c852 100644 --- a/arch/mips/configs/ath79_defconfig +++ b/arch/mips/configs/ath79_defconfig @@ -10,12 +10,6 @@ CONFIG_EMBEDDED=y # CONFIG_SLUB_DEBUG is not set # CONFIG_COMPAT_BRK is not set CONFIG_ATH79=y -CONFIG_ATH79_MACH_AP121=y -CONFIG_ATH79_MACH_AP136=y -CONFIG_ATH79_MACH_AP81=y -CONFIG_ATH79_MACH_DB120=y -CONFIG_ATH79_MACH_PB44=y -CONFIG_ATH79_MACH_UBNT_XM=y CONFIG_HZ_100=y # CONFIG_SECCOMP is not set CONFIG_PCI=y @@ -29,9 +23,6 @@ CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_IPV6 is not set CONFIG_CFG80211=m CONFIG_MAC80211=m @@ -92,7 +83,6 @@ CONFIG_LEDS_GPIO=y # CONFIG_DNOTIFY is not set # CONFIG_PROC_PAGE_MONITOR is not set CONFIG_CRC_ITU_T=m -# CONFIG_ENABLE_MUST_CHECK is not set CONFIG_STRIP_ASM_SYMS=y CONFIG_DEBUG_FS=y # CONFIG_SCHED_DEBUG is not set diff --git a/arch/mips/configs/bcm63xx_defconfig b/arch/mips/configs/bcm63xx_defconfig index 861f680184b9..34d0ca638ef0 100644 --- a/arch/mips/configs/bcm63xx_defconfig +++ b/arch/mips/configs/bcm63xx_defconfig @@ -24,9 +24,6 @@ CONFIG_PCMCIA_BCM63XX=y CONFIG_NET=y CONFIG_UNIX=y CONFIG_INET=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_DIAG is not set # CONFIG_IPV6 is not set CONFIG_CFG80211=y diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig index d83e7d600b0a..d15961f00ece 100644 --- a/arch/mips/configs/bigsur_defconfig +++ b/arch/mips/configs/bigsur_defconfig @@ -49,8 +49,6 @@ CONFIG_IP_PIMSM_V2=y CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_TCP_MD5SIG=y CONFIG_IPV6_ROUTER_PREF=y CONFIG_IPV6_ROUTE_INFO=y @@ -59,7 +57,6 @@ CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m CONFIG_IPV6_MIP6=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m CONFIG_IPV6_SIT_6RD=y CONFIG_IPV6_TUNNEL=m CONFIG_IPV6_MULTIPLE_TABLES=y @@ -101,7 +98,6 @@ CONFIG_BAYCOM_SER_HDX=m CONFIG_YAM=m CONFIG_FW_LOADER=m CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_NBD=m CONFIG_EEPROM_LEGACY=y CONFIG_EEPROM_MAX6875=y @@ -230,12 +226,8 @@ CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m -CONFIG_CRYPTO_RMD256=m -CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m @@ -243,7 +235,6 @@ CONFIG_CRYPTO_CAMELLIA=m CONFIG_CRYPTO_CAST6=m CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_SALSA20=m CONFIG_CRYPTO_SEED=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_TEA=m diff --git a/arch/mips/configs/bmips_be_defconfig b/arch/mips/configs/bmips_be_defconfig index 032bb51defe8..daef132d000b 100644 --- a/arch/mips/configs/bmips_be_defconfig +++ b/arch/mips/configs/bmips_be_defconfig @@ -17,9 +17,6 @@ CONFIG_PACKET=y CONFIG_PACKET_DIAG=y CONFIG_UNIX=y CONFIG_INET=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_DIAG is not set CONFIG_CFG80211=y CONFIG_NL80211_TESTMODE=y diff --git a/arch/mips/configs/bmips_stb_defconfig b/arch/mips/configs/bmips_stb_defconfig index 5956fb95c19f..cd0dc37c3d84 100644 --- a/arch/mips/configs/bmips_stb_defconfig +++ b/arch/mips/configs/bmips_stb_defconfig @@ -12,7 +12,6 @@ CONFIG_HIGHMEM=y CONFIG_HIGH_RES_TIMERS=y CONFIG_SMP=y CONFIG_NR_CPUS=4 -CONFIG_CC_STACKPROTECTOR_STRONG=y # CONFIG_SECCOMP is not set CONFIG_MIPS_O32_FP64_SUPPORT=y # CONFIG_RD_GZIP is not set @@ -21,8 +20,6 @@ CONFIG_MIPS_O32_FP64_SUPPORT=y CONFIG_RD_XZ=y # CONFIG_RD_LZO is not set # CONFIG_RD_LZ4 is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set CONFIG_PCI=y CONFIG_PCI_MSI=y CONFIG_PCIEASPM_POWERSAVE=y @@ -30,7 +27,6 @@ CONFIG_PCIEPORTBUS=y CONFIG_PCIE_BRCMSTB=y CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_STAT=y -CONFIG_CPU_FREQ_STAT_DETAILS=y CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y @@ -44,15 +40,11 @@ CONFIG_PACKET=y CONFIG_PACKET_DIAG=y CONFIG_UNIX=y CONFIG_INET=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_DIAG is not set CONFIG_CFG80211=y CONFIG_NL80211_TESTMODE=y CONFIG_WIRELESS=y CONFIG_MAC80211=y -CONFIG_NL80211=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y # CONFIG_STANDALONE is not set @@ -70,10 +62,6 @@ CONFIG_IP_PNP_RARP=y CONFIG_IP_MROUTE=y CONFIG_IP_PIMSM_V1=y CONFIG_IP_PIMSM_V2=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set CONFIG_INET_UDP_DIAG=y CONFIG_TCP_CONG_ADVANCED=y CONFIG_TCP_CONG_BIC=y @@ -93,7 +81,6 @@ CONFIG_NET_SWITCHDEV=y CONFIG_DMA_CMA=y CONFIG_CMA_ALIGNMENT=12 CONFIG_SPI=y -CONFIG_SPI_BRCMSTB=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y @@ -105,14 +92,11 @@ CONFIG_MTD_CFI_STAA=y CONFIG_MTD_ROM=y CONFIG_MTD_ABSENT=y CONFIG_MTD_PHYSMAP_OF=y -CONFIG_MTD_M25P80=y -CONFIG_MTD_NAND=y CONFIG_MTD_NAND_BRCMNAND=y CONFIG_MTD_SPI_NOR=y # CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set CONFIG_MTD_UBI=y CONFIG_MTD_UBI_GLUEBI=y -CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 @@ -120,7 +104,6 @@ CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_SG=y -CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y CONFIG_VLAN_8021Q=y @@ -135,7 +118,6 @@ CONFIG_INPUT_UINPUT=y # CONFIG_SERIO is not set CONFIG_VT=y CONFIG_VT_HW_CONSOLE_BINDING=y -# CONFIG_DEVKMEM is not set CONFIG_SERIAL_8250=y # CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set CONFIG_SERIAL_8250_CONSOLE=y @@ -203,17 +185,14 @@ CONFIG_CMDLINE="earlycon" CONFIG_MIPS_CMDLINE_DTB_EXTEND=y # CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set # CONFIG_CRYPTO_HW is not set -CONFIG_DT_BCM974XX=y CONFIG_FW_CFE=y CONFIG_ATA=y CONFIG_SATA_AHCI_PLATFORM=y -CONFIG_AHCI_BRCMSTB=y CONFIG_GENERIC_PHY=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y CONFIG_PHY_BRCM_USB=y CONFIG_PHY_BRCM_SATA=y -CONFIG_PM_RUNTIME=y CONFIG_PM_DEBUG=y CONFIG_SYSVIPC=y CONFIG_FUNCTION_GRAPH_TRACER=y @@ -227,3 +206,5 @@ CONFIG_FTRACE_SYSCALLS=y CONFIG_TRACER_SNAPSHOT=y CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=y CONFIG_STACK_TRACER=y +CONFIG_AHCI_BRCM=y +CONFIG_MTD_RAW_NAND=y diff --git a/arch/mips/configs/cavium_octeon_defconfig b/arch/mips/configs/cavium_octeon_defconfig index 97ceaf080c0c..a2311495af79 100644 --- a/arch/mips/configs/cavium_octeon_defconfig +++ b/arch/mips/configs/cavium_octeon_defconfig @@ -71,7 +71,6 @@ CONFIG_NETDEVICES=y # CONFIG_NET_VENDOR_DEC is not set # CONFIG_NET_VENDOR_DLINK is not set # CONFIG_NET_VENDOR_EMULEX is not set -# CONFIG_NET_VENDOR_HP is not set # CONFIG_NET_VENDOR_INTEL is not set # CONFIG_NET_VENDOR_MARVELL is not set # CONFIG_NET_VENDOR_MELLANOX is not set diff --git a/arch/mips/configs/db1xxx_defconfig b/arch/mips/configs/db1xxx_defconfig index b8bd66300996..a8b62df3c021 100644 --- a/arch/mips/configs/db1xxx_defconfig +++ b/arch/mips/configs/db1xxx_defconfig @@ -61,7 +61,6 @@ CONFIG_INET6_AH=y CONFIG_INET6_ESP=y CONFIG_INET6_IPCOMP=y CONFIG_IPV6_MIP6=y -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=y CONFIG_IPV6_VTI=y CONFIG_IPV6_SIT_6RD=y CONFIG_IPV6_GRE=y diff --git a/arch/mips/configs/decstation_64_defconfig b/arch/mips/configs/decstation_64_defconfig index 0021427a1bbe..49ec1575234e 100644 --- a/arch/mips/configs/decstation_64_defconfig +++ b/arch/mips/configs/decstation_64_defconfig @@ -37,9 +37,6 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m CONFIG_TCP_MD5SIG=y CONFIG_IPV6_ROUTER_PREF=y CONFIG_IPV6_ROUTE_INFO=y @@ -47,14 +44,11 @@ CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m CONFIG_IPV6_MIP6=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m CONFIG_IPV6_MULTIPLE_TABLES=y CONFIG_IPV6_SUBTREES=y CONFIG_NETWORK_SECMARK=y CONFIG_IP_SCTP=m CONFIG_VLAN_8021Q=m -CONFIG_DECNET=m -CONFIG_DECNET_ROUTER=y # CONFIG_WIRELESS is not set # CONFIG_UEVENT_HELPER is not set # CONFIG_FW_LOADER is not set @@ -79,7 +73,6 @@ CONFIG_NETDEVICES=y CONFIG_DECLANCE=y # CONFIG_NET_VENDOR_AQUANTIA is not set # CONFIG_NET_VENDOR_ARC is not set -# CONFIG_NET_VENDOR_AURORA is not set # CONFIG_NET_VENDOR_BROADCOM is not set # CONFIG_NET_VENDOR_CADENCE is not set # CONFIG_NET_VENDOR_CAVIUM is not set @@ -193,12 +186,8 @@ CONFIG_CRYPTO_CRC32=m CONFIG_CRYPTO_CRCT10DIF=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m -CONFIG_CRYPTO_RMD256=m -CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_ARC4=m @@ -208,7 +197,6 @@ CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_SALSA20=m CONFIG_CRYPTO_SEED=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_TEA=m diff --git a/arch/mips/configs/decstation_defconfig b/arch/mips/configs/decstation_defconfig index 7a97a0818ce4..5cec4c096e2c 100644 --- a/arch/mips/configs/decstation_defconfig +++ b/arch/mips/configs/decstation_defconfig @@ -33,9 +33,6 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m CONFIG_TCP_MD5SIG=y CONFIG_IPV6_ROUTER_PREF=y CONFIG_IPV6_ROUTE_INFO=y @@ -43,14 +40,11 @@ CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m CONFIG_IPV6_MIP6=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m CONFIG_IPV6_MULTIPLE_TABLES=y CONFIG_IPV6_SUBTREES=y CONFIG_NETWORK_SECMARK=y CONFIG_IP_SCTP=m CONFIG_VLAN_8021Q=m -CONFIG_DECNET=m -CONFIG_DECNET_ROUTER=y # CONFIG_WIRELESS is not set # CONFIG_UEVENT_HELPER is not set # CONFIG_FW_LOADER is not set @@ -75,7 +69,6 @@ CONFIG_NETDEVICES=y CONFIG_DECLANCE=y # CONFIG_NET_VENDOR_AQUANTIA is not set # CONFIG_NET_VENDOR_ARC is not set -# CONFIG_NET_VENDOR_AURORA is not set # CONFIG_NET_VENDOR_BROADCOM is not set # CONFIG_NET_VENDOR_CADENCE is not set # CONFIG_NET_VENDOR_CAVIUM is not set @@ -188,12 +181,8 @@ CONFIG_CRYPTO_CRC32=m CONFIG_CRYPTO_CRCT10DIF=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m -CONFIG_CRYPTO_RMD256=m -CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_ARC4=m @@ -203,7 +192,6 @@ CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_SALSA20=m CONFIG_CRYPTO_SEED=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_TEA=m diff --git a/arch/mips/configs/decstation_r4k_defconfig b/arch/mips/configs/decstation_r4k_defconfig index a0643363526d..af37e26d9b5b 100644 --- a/arch/mips/configs/decstation_r4k_defconfig +++ b/arch/mips/configs/decstation_r4k_defconfig @@ -32,9 +32,6 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m CONFIG_TCP_MD5SIG=y CONFIG_IPV6_ROUTER_PREF=y CONFIG_IPV6_ROUTE_INFO=y @@ -42,14 +39,11 @@ CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m CONFIG_IPV6_MIP6=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m CONFIG_IPV6_MULTIPLE_TABLES=y CONFIG_IPV6_SUBTREES=y CONFIG_NETWORK_SECMARK=y CONFIG_IP_SCTP=m CONFIG_VLAN_8021Q=m -CONFIG_DECNET=m -CONFIG_DECNET_ROUTER=y # CONFIG_WIRELESS is not set # CONFIG_UEVENT_HELPER is not set # CONFIG_FW_LOADER is not set @@ -74,7 +68,6 @@ CONFIG_NETDEVICES=y CONFIG_DECLANCE=y # CONFIG_NET_VENDOR_AQUANTIA is not set # CONFIG_NET_VENDOR_ARC is not set -# CONFIG_NET_VENDOR_AURORA is not set # CONFIG_NET_VENDOR_BROADCOM is not set # CONFIG_NET_VENDOR_CADENCE is not set # CONFIG_NET_VENDOR_CAVIUM is not set @@ -188,12 +181,8 @@ CONFIG_CRYPTO_CRC32=m CONFIG_CRYPTO_CRCT10DIF=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m -CONFIG_CRYPTO_RMD256=m -CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_ARC4=m @@ -203,7 +192,6 @@ CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_SALSA20=m CONFIG_CRYPTO_SEED=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_TEA=m diff --git a/arch/mips/configs/fuloong2e_defconfig b/arch/mips/configs/fuloong2e_defconfig index ba47c5e929b7..843d6a5a4f61 100644 --- a/arch/mips/configs/fuloong2e_defconfig +++ b/arch/mips/configs/fuloong2e_defconfig @@ -35,8 +35,6 @@ CONFIG_IP_MULTICAST=y CONFIG_IP_PNP=y CONFIG_IP_PNP_BOOTP=y CONFIG_NET_IPIP=m -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_DIAG is not set # CONFIG_IPV6 is not set CONFIG_NETFILTER=y @@ -92,7 +90,6 @@ CONFIG_MTD_CFI_AMDSTD=m CONFIG_MTD_CFI_STAA=m CONFIG_MTD_PHYSMAP=m CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_RAM=m CONFIG_CDROM_PKTCDVD=m CONFIG_ATA_OVER_ETH=m @@ -159,7 +156,6 @@ CONFIG_USB_MOUSE=y CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_OTG_PRODUCTLIST=y -CONFIG_USB_WUSB_CBAF=m CONFIG_USB_C67X00_HCD=m CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y @@ -219,15 +215,10 @@ CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m -CONFIG_CRYPTO_RMD256=m -CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SALSA20=m CONFIG_CRYPTO_SEED=m CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_HW is not set CONFIG_CRC_CCITT=y CONFIG_CRC7=m -# CONFIG_ENABLE_MUST_CHECK is not set diff --git a/arch/mips/configs/generic/board-ocelot.config b/arch/mips/configs/generic/board-ocelot.config index 510709565404..8cfbafa532e0 100644 --- a/arch/mips/configs/generic/board-ocelot.config +++ b/arch/mips/configs/generic/board-ocelot.config @@ -25,7 +25,6 @@ CONFIG_NETDEVICES=y CONFIG_NET_SWITCHDEV=y CONFIG_NET_DSA=y CONFIG_MSCC_OCELOT_SWITCH=y -CONFIG_MSCC_OCELOT_SWITCH_OCELOT=y CONFIG_MDIO_MSCC_MIIM=y CONFIG_MICROSEMI_PHY=y diff --git a/arch/mips/configs/gpr_defconfig b/arch/mips/configs/gpr_defconfig index d82f4ebf687f..eb755650f821 100644 --- a/arch/mips/configs/gpr_defconfig +++ b/arch/mips/configs/gpr_defconfig @@ -29,9 +29,6 @@ CONFIG_IP_ROUTE_VERBOSE=y CONFIG_IP_PNP=y CONFIG_IP_PNP_BOOTP=y CONFIG_SYN_COOKIES=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_IPV6 is not set CONFIG_NETWORK_SECMARK=y CONFIG_NETFILTER=y @@ -69,7 +66,6 @@ CONFIG_IP_NF_RAW=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m -CONFIG_DECNET_NF_GRABULATOR=m CONFIG_BRIDGE_NF_EBTABLES=m CONFIG_BRIDGE_EBT_BROUTE=m CONFIG_BRIDGE_EBT_T_FILTER=m @@ -99,7 +95,6 @@ CONFIG_ATM_MPOA=m CONFIG_ATM_BR2684=m CONFIG_BRIDGE=m CONFIG_VLAN_8021Q=m -CONFIG_DECNET=m CONFIG_LLC2=m CONFIG_ATALK=m CONFIG_DEV_APPLETALK=m @@ -220,9 +215,6 @@ CONFIG_HDLC_X25=m CONFIG_PCI200SYN=m CONFIG_WANXL=m CONFIG_FARSYNC=m -CONFIG_DSCC4=m -CONFIG_DSCC4_PCISYNC=y -CONFIG_DSCC4_PCI_RST=y CONFIG_LAPBETHER=m # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set @@ -288,7 +280,6 @@ CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m @@ -299,7 +290,6 @@ CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_DEFLATE=m -# CONFIG_ENABLE_MUST_CHECK is not set CONFIG_MAGIC_SYSRQ=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs rw ip=auto" diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig index 70a4ba90f491..13df29901237 100644 --- a/arch/mips/configs/ip22_defconfig +++ b/arch/mips/configs/ip22_defconfig @@ -36,9 +36,6 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m CONFIG_TCP_MD5SIG=y CONFIG_IPV6_ROUTER_PREF=y CONFIG_IPV6_ROUTE_INFO=y @@ -47,7 +44,6 @@ CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m CONFIG_IPV6_MIP6=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m CONFIG_IPV6_TUNNEL=m CONFIG_IPV6_MULTIPLE_TABLES=y CONFIG_IPV6_SUBTREES=y @@ -226,7 +222,6 @@ CONFIG_SERIO_RAW=m CONFIG_VT_HW_CONSOLE_BINDING=y CONFIG_SERIAL_IP22_ZILOG=m # CONFIG_HW_RANDOM is not set -CONFIG_RAW_DRIVER=m # CONFIG_HWMON is not set CONFIG_THERMAL=y CONFIG_WATCHDOG=y @@ -320,11 +315,7 @@ CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m -CONFIG_CRYPTO_RMD256=m -CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m @@ -333,7 +324,6 @@ CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_SALSA20=m CONFIG_CRYPTO_SEED=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_TEA=m diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig index 821630ac1be7..3e86f8106ba0 100644 --- a/arch/mips/configs/ip27_defconfig +++ b/arch/mips/configs/ip27_defconfig @@ -33,9 +33,6 @@ CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_PNP=y -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m CONFIG_TCP_MD5SIG=y CONFIG_IPV6_ROUTER_PREF=y CONFIG_IPV6_ROUTE_INFO=y @@ -44,10 +41,6 @@ CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m CONFIG_IPV6_MIP6=m -CONFIG_INET6_XFRM_MODE_TRANSPORT=m -CONFIG_INET6_XFRM_MODE_TUNNEL=m -CONFIG_INET6_XFRM_MODE_BEET=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m CONFIG_IPV6_SIT=m CONFIG_IPV6_SIT_6RD=y CONFIG_IPV6_TUNNEL=m @@ -92,7 +85,6 @@ CONFIG_CFG80211=m CONFIG_MAC80211=m CONFIG_RFKILL=m CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_CDROM_PKTCDVD=m CONFIG_ATA_OVER_ETH=m CONFIG_SCSI=y @@ -115,7 +107,6 @@ CONFIG_SCSI_AIC94XX=m # CONFIG_AIC94XX_DEBUG is not set CONFIG_SCSI_MVSAS=m # CONFIG_SCSI_MVSAS_DEBUG is not set -CONFIG_SCSI_DPT_I2O=m CONFIG_SCSI_MPT2SAS=m CONFIG_LIBFC=m CONFIG_SCSI_QLOGIC_1280=y @@ -126,8 +117,6 @@ CONFIG_SCSI_DH_RDAC=m CONFIG_SCSI_DH_HP_SW=m CONFIG_SCSI_DH_EMC=m CONFIG_SCSI_DH_ALUA=m -CONFIG_SCSI_OSD_INITIATOR=m -CONFIG_SCSI_OSD_ULD=m CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_LINEAR=m @@ -166,7 +155,6 @@ CONFIG_JME=m CONFIG_MLX4_EN=m # CONFIG_MLX4_DEBUG is not set CONFIG_KS8851_MLL=m -CONFIG_VXGE=m CONFIG_AX88796=m CONFIG_AX88796_93CX6=y CONFIG_ETHOC=m @@ -264,7 +252,6 @@ CONFIG_I2C_VIAPRO=m CONFIG_I2C_OCORES=m CONFIG_I2C_PCA_PLATFORM=m CONFIG_I2C_SIMTEC=m -CONFIG_I2C_PARPORT_LIGHT=m CONFIG_I2C_TAOS_EVM=m CONFIG_I2C_STUB=m # CONFIG_HWMON is not set @@ -309,7 +296,6 @@ CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_SQUASHFS=m CONFIG_OMFS_FS=m -CONFIG_EXOFS_FS=m CONFIG_NFS_FS=y CONFIG_SECURITYFS=y CONFIG_CRYPTO_CRYPTD=m @@ -321,12 +307,8 @@ CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m -CONFIG_CRYPTO_RMD256=m -CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m @@ -335,7 +317,6 @@ CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_SALSA20=m CONFIG_CRYPTO_SEED=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_TEA=m diff --git a/arch/mips/configs/ip28_defconfig b/arch/mips/configs/ip28_defconfig index 0921ef38e9fb..ba13eea0509f 100644 --- a/arch/mips/configs/ip28_defconfig +++ b/arch/mips/configs/ip28_defconfig @@ -29,9 +29,6 @@ CONFIG_IP_MULTICAST=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set CONFIG_TCP_MD5SIG=y # CONFIG_IPV6 is not set CONFIG_SCSI=y diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig index 74020aa3440b..8ced2224c328 100644 --- a/arch/mips/configs/ip32_defconfig +++ b/arch/mips/configs/ip32_defconfig @@ -43,7 +43,6 @@ CONFIG_IPV6_TUNNEL=m CONFIG_NETWORK_SECMARK=y CONFIG_CONNECTOR=y CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_NBD=m CONFIG_RAID_ATTRS=y CONFIG_SCSI=y @@ -165,7 +164,6 @@ CONFIG_CRYPTO_MICHAEL_MIC=y CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y -CONFIG_CRYPTO_TGR192=y CONFIG_CRYPTO_WP512=y CONFIG_CRYPTO_ANUBIS=y CONFIG_CRYPTO_ARC4=y diff --git a/arch/mips/configs/jazz_defconfig b/arch/mips/configs/jazz_defconfig index 843f360da5f2..106b21cb677f 100644 --- a/arch/mips/configs/jazz_defconfig +++ b/arch/mips/configs/jazz_defconfig @@ -32,7 +32,6 @@ CONFIG_PARPORT_1284=y CONFIG_DEVTMPFS=y CONFIG_BLK_DEV_FD=m CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=m CONFIG_CDROM_PKTCDVD=m diff --git a/arch/mips/configs/lemote2f_defconfig b/arch/mips/configs/lemote2f_defconfig index 791894c4d8fb..7e598d338979 100644 --- a/arch/mips/configs/lemote2f_defconfig +++ b/arch/mips/configs/lemote2f_defconfig @@ -43,9 +43,6 @@ CONFIG_IP_MROUTE=y CONFIG_IP_PIMSM_V1=y CONFIG_IP_PIMSM_V2=y CONFIG_SYN_COOKIES=y -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m CONFIG_TCP_CONG_ADVANCED=y CONFIG_TCP_CONG_BIC=y CONFIG_DEFAULT_BIC=y @@ -77,7 +74,6 @@ CONFIG_MAC80211_LEDS=y CONFIG_RFKILL=m CONFIG_RFKILL_INPUT=y CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_SD=y @@ -312,12 +308,8 @@ CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m -CONFIG_CRYPTO_RMD256=m -CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m @@ -326,7 +318,6 @@ CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_SALSA20=m CONFIG_CRYPTO_SEED=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_TEA=m diff --git a/arch/mips/configs/loongson1b_defconfig b/arch/mips/configs/loongson1b_defconfig index 25e70423e17d..68207b31dc20 100644 --- a/arch/mips/configs/loongson1b_defconfig +++ b/arch/mips/configs/loongson1b_defconfig @@ -28,9 +28,6 @@ CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_SYN_COOKIES=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_DIAG is not set # CONFIG_IPV6 is not set # CONFIG_WIRELESS is not set @@ -115,7 +112,6 @@ CONFIG_NLS_ISO8859_1=m # CONFIG_CRYPTO_ECHAINIV is not set # CONFIG_CRYPTO_HW is not set CONFIG_DYNAMIC_DEBUG=y -# CONFIG_ENABLE_MUST_CHECK is not set CONFIG_DEBUG_FS=y CONFIG_MAGIC_SYSRQ=y # CONFIG_SCHED_DEBUG is not set diff --git a/arch/mips/configs/loongson1c_defconfig b/arch/mips/configs/loongson1c_defconfig index 3a158d4d2fab..c3910a9dee9e 100644 --- a/arch/mips/configs/loongson1c_defconfig +++ b/arch/mips/configs/loongson1c_defconfig @@ -29,9 +29,6 @@ CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_SYN_COOKIES=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_DIAG is not set # CONFIG_IPV6 is not set # CONFIG_WIRELESS is not set @@ -116,7 +113,6 @@ CONFIG_NLS_ISO8859_1=m # CONFIG_CRYPTO_ECHAINIV is not set # CONFIG_CRYPTO_HW is not set CONFIG_DYNAMIC_DEBUG=y -# CONFIG_ENABLE_MUST_CHECK is not set CONFIG_DEBUG_FS=y CONFIG_MAGIC_SYSRQ=y # CONFIG_SCHED_DEBUG is not set diff --git a/arch/mips/configs/loongson2k_defconfig b/arch/mips/configs/loongson2k_defconfig index e948ca487e2d..728bef666f7a 100644 --- a/arch/mips/configs/loongson2k_defconfig +++ b/arch/mips/configs/loongson2k_defconfig @@ -95,7 +95,6 @@ CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=m CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_CRYPTOLOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_RAID_ATTRS=m @@ -229,7 +228,6 @@ CONFIG_SERIAL_8250_RSA=y CONFIG_SERIAL_OF_PLATFORM=y CONFIG_SERIAL_NONSTANDARD=y CONFIG_HW_RANDOM=y -CONFIG_RAW_DRIVER=m CONFIG_I2C_CHARDEV=y CONFIG_I2C_PIIX4=y CONFIG_GPIO_LOONGSON=y @@ -336,7 +334,6 @@ CONFIG_DEFAULT_SECURITY_DAC=y CONFIG_CRYPTO_SEQIV=m CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAST5=m diff --git a/arch/mips/configs/loongson3_defconfig b/arch/mips/configs/loongson3_defconfig index 25ecd15bc952..aca66a5f330d 100644 --- a/arch/mips/configs/loongson3_defconfig +++ b/arch/mips/configs/loongson3_defconfig @@ -143,7 +143,6 @@ CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=m CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_CRYPTOLOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_VIRTIO_BLK=y @@ -268,7 +267,6 @@ CONFIG_SERIAL_OF_PLATFORM=y CONFIG_SERIAL_NONSTANDARD=y CONFIG_VIRTIO_CONSOLE=y CONFIG_HW_RANDOM=y -CONFIG_RAW_DRIVER=m CONFIG_I2C_CHARDEV=y CONFIG_I2C_PIIX4=y CONFIG_GPIO_LOONGSON=y diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig index 7a5bdd236a2a..265d38dffbf6 100644 --- a/arch/mips/configs/malta_defconfig +++ b/arch/mips/configs/malta_defconfig @@ -42,8 +42,6 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_TCP_MD5SIG=y CONFIG_IPV6_ROUTER_PREF=y CONFIG_IPV6_ROUTE_INFO=y @@ -229,7 +227,6 @@ CONFIG_MTD_UBI=m CONFIG_MTD_UBI_GLUEBI=m CONFIG_BLK_DEV_FD=m CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m @@ -237,7 +234,6 @@ CONFIG_ATA_OVER_ETH=m CONFIG_RAID_ATTRS=m CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m CONFIG_BLK_DEV_SR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y @@ -408,7 +404,6 @@ CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m diff --git a/arch/mips/configs/malta_kvm_defconfig b/arch/mips/configs/malta_kvm_defconfig index b5ba08d7ab57..1d2b248c7cd3 100644 --- a/arch/mips/configs/malta_kvm_defconfig +++ b/arch/mips/configs/malta_kvm_defconfig @@ -46,8 +46,6 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_TCP_MD5SIG=y CONFIG_IPV6_ROUTER_PREF=y CONFIG_IPV6_ROUTE_INFO=y @@ -233,7 +231,6 @@ CONFIG_MTD_UBI=m CONFIG_MTD_UBI_GLUEBI=m CONFIG_BLK_DEV_FD=m CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m @@ -241,7 +238,6 @@ CONFIG_ATA_OVER_ETH=m CONFIG_RAID_ATTRS=m CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m CONFIG_BLK_DEV_SR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y @@ -415,7 +411,6 @@ CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m diff --git a/arch/mips/configs/malta_qemu_32r6_defconfig b/arch/mips/configs/malta_qemu_32r6_defconfig index 6fb9bc29f4a0..fd63a2b152f6 100644 --- a/arch/mips/configs/malta_qemu_32r6_defconfig +++ b/arch/mips/configs/malta_qemu_32r6_defconfig @@ -76,7 +76,6 @@ CONFIG_NET_ACT_POLICE=y # CONFIG_WIRELESS is not set CONFIG_DEVTMPFS=y CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_LOWLEVEL is not set @@ -98,7 +97,6 @@ CONFIG_PCNET32=y # CONFIG_NET_VENDOR_DEC is not set # CONFIG_NET_VENDOR_DLINK is not set # CONFIG_NET_VENDOR_EMULEX is not set -# CONFIG_NET_VENDOR_HP is not set # CONFIG_NET_VENDOR_INTEL is not set # CONFIG_NET_VENDOR_MARVELL is not set # CONFIG_NET_VENDOR_MELLANOX is not set @@ -172,7 +170,6 @@ CONFIG_NLS_ISO8859_1=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m diff --git a/arch/mips/configs/maltaaprp_defconfig b/arch/mips/configs/maltaaprp_defconfig index eb72df528243..1f07e354c954 100644 --- a/arch/mips/configs/maltaaprp_defconfig +++ b/arch/mips/configs/maltaaprp_defconfig @@ -78,7 +78,6 @@ CONFIG_NET_ACT_POLICE=y # CONFIG_WIRELESS is not set CONFIG_DEVTMPFS=y CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_LOWLEVEL is not set @@ -100,7 +99,6 @@ CONFIG_PCNET32=y # CONFIG_NET_VENDOR_DEC is not set # CONFIG_NET_VENDOR_DLINK is not set # CONFIG_NET_VENDOR_EMULEX is not set -# CONFIG_NET_VENDOR_HP is not set # CONFIG_NET_VENDOR_INTEL is not set # CONFIG_NET_VENDOR_MARVELL is not set # CONFIG_NET_VENDOR_MELLANOX is not set @@ -173,7 +171,6 @@ CONFIG_NLS_ISO8859_1=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m diff --git a/arch/mips/configs/maltasmvp_defconfig b/arch/mips/configs/maltasmvp_defconfig index 1fb40d310f49..5cd3eca236de 100644 --- a/arch/mips/configs/maltasmvp_defconfig +++ b/arch/mips/configs/maltasmvp_defconfig @@ -79,7 +79,6 @@ CONFIG_NET_ACT_POLICE=y # CONFIG_WIRELESS is not set CONFIG_DEVTMPFS=y CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_LOWLEVEL is not set @@ -99,7 +98,6 @@ CONFIG_PCNET32=y # CONFIG_NET_VENDOR_DEC is not set # CONFIG_NET_VENDOR_DLINK is not set # CONFIG_NET_VENDOR_EMULEX is not set -# CONFIG_NET_VENDOR_HP is not set # CONFIG_NET_VENDOR_INTEL is not set # CONFIG_NET_VENDOR_MARVELL is not set # CONFIG_NET_VENDOR_MELLANOX is not set @@ -174,7 +172,6 @@ CONFIG_NLS_ISO8859_1=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m diff --git a/arch/mips/configs/maltasmvp_eva_defconfig b/arch/mips/configs/maltasmvp_eva_defconfig index 75cb778c6149..45688e742a15 100644 --- a/arch/mips/configs/maltasmvp_eva_defconfig +++ b/arch/mips/configs/maltasmvp_eva_defconfig @@ -80,7 +80,6 @@ CONFIG_NET_ACT_POLICE=y # CONFIG_WIRELESS is not set CONFIG_DEVTMPFS=y CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_LOWLEVEL is not set @@ -102,7 +101,6 @@ CONFIG_PCNET32=y # CONFIG_NET_VENDOR_DEC is not set # CONFIG_NET_VENDOR_DLINK is not set # CONFIG_NET_VENDOR_EMULEX is not set -# CONFIG_NET_VENDOR_HP is not set # CONFIG_NET_VENDOR_INTEL is not set # CONFIG_NET_VENDOR_MARVELL is not set # CONFIG_NET_VENDOR_MELLANOX is not set @@ -176,7 +174,6 @@ CONFIG_NLS_ISO8859_1=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m diff --git a/arch/mips/configs/maltaup_defconfig b/arch/mips/configs/maltaup_defconfig index 7b4f247dc60c..136f965784db 100644 --- a/arch/mips/configs/maltaup_defconfig +++ b/arch/mips/configs/maltaup_defconfig @@ -77,7 +77,6 @@ CONFIG_NET_ACT_POLICE=y # CONFIG_WIRELESS is not set CONFIG_DEVTMPFS=y CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_LOWLEVEL is not set @@ -99,7 +98,6 @@ CONFIG_PCNET32=y # CONFIG_NET_VENDOR_DEC is not set # CONFIG_NET_VENDOR_DLINK is not set # CONFIG_NET_VENDOR_EMULEX is not set -# CONFIG_NET_VENDOR_HP is not set # CONFIG_NET_VENDOR_INTEL is not set # CONFIG_NET_VENDOR_MARVELL is not set # CONFIG_NET_VENDOR_MELLANOX is not set @@ -172,7 +170,6 @@ CONFIG_NLS_ISO8859_1=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m diff --git a/arch/mips/configs/maltaup_xpa_defconfig b/arch/mips/configs/maltaup_xpa_defconfig index 8d58653f1b4e..75b8da8d9927 100644 --- a/arch/mips/configs/maltaup_xpa_defconfig +++ b/arch/mips/configs/maltaup_xpa_defconfig @@ -45,8 +45,6 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_TCP_MD5SIG=y CONFIG_IPV6_ROUTER_PREF=y CONFIG_IPV6_ROUTE_INFO=y @@ -231,7 +229,6 @@ CONFIG_MTD_UBI=m CONFIG_MTD_UBI_GLUEBI=m CONFIG_BLK_DEV_FD=m CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m @@ -239,7 +236,6 @@ CONFIG_ATA_OVER_ETH=m CONFIG_RAID_ATTRS=m CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m CONFIG_BLK_DEV_SR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y @@ -414,7 +410,6 @@ CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig index 4194e79b435c..edf9634aa8ee 100644 --- a/arch/mips/configs/mtx1_defconfig +++ b/arch/mips/configs/mtx1_defconfig @@ -58,13 +58,9 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m CONFIG_IPV6_TUNNEL=m CONFIG_NETWORK_SECMARK=y CONFIG_NETFILTER=y @@ -116,7 +112,6 @@ CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m -CONFIG_DECNET_NF_GRABULATOR=m CONFIG_BRIDGE_NF_EBTABLES=m CONFIG_BRIDGE_EBT_BROUTE=m CONFIG_BRIDGE_EBT_T_FILTER=m @@ -146,7 +141,6 @@ CONFIG_ATM_MPOA=m CONFIG_ATM_BR2684=m CONFIG_BRIDGE=m CONFIG_VLAN_8021Q=m -CONFIG_DECNET=m CONFIG_LLC2=m CONFIG_ATALK=m CONFIG_DEV_APPLETALK=m @@ -284,7 +278,6 @@ CONFIG_PCMCIA_XIRCOM=m CONFIG_DL2K=m CONFIG_SUNDANCE=m CONFIG_PCMCIA_FMVJ18X=m -CONFIG_HP100=m CONFIG_E100=m CONFIG_E1000=m CONFIG_IXGB=m @@ -368,9 +361,6 @@ CONFIG_HDLC_X25=m CONFIG_PCI200SYN=m CONFIG_WANXL=m CONFIG_FARSYNC=m -CONFIG_DSCC4=m -CONFIG_DSCC4_PCISYNC=y -CONFIG_DSCC4_PCI_RST=y CONFIG_LAPBETHER=m # CONFIG_KEYBOARD_ATKBD is not set CONFIG_KEYBOARD_GPIO=y @@ -683,7 +673,6 @@ CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m @@ -692,5 +681,4 @@ CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m -# CONFIG_ENABLE_MUST_CHECK is not set CONFIG_MAGIC_SYSRQ=y diff --git a/arch/mips/configs/omega2p_defconfig b/arch/mips/configs/omega2p_defconfig index fc39ddf610a9..9c34daf83563 100644 --- a/arch/mips/configs/omega2p_defconfig +++ b/arch/mips/configs/omega2p_defconfig @@ -35,9 +35,6 @@ CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_DIAG is not set # CONFIG_IPV6 is not set # CONFIG_WIRELESS is not set diff --git a/arch/mips/configs/pic32mzda_defconfig b/arch/mips/configs/pic32mzda_defconfig index fd567247adc7..48dd02d01ac1 100644 --- a/arch/mips/configs/pic32mzda_defconfig +++ b/arch/mips/configs/pic32mzda_defconfig @@ -45,7 +45,6 @@ CONFIG_KEYBOARD_GPIO_POLLED=m CONFIG_SERIAL_PIC32=y CONFIG_SERIAL_PIC32_CONSOLE=y CONFIG_HW_RANDOM=y -CONFIG_RAW_DRIVER=m CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set CONFIG_HIDRAW=y diff --git a/arch/mips/configs/rb532_defconfig b/arch/mips/configs/rb532_defconfig index 252d472387aa..93306f5e045b 100644 --- a/arch/mips/configs/rb532_defconfig +++ b/arch/mips/configs/rb532_defconfig @@ -33,9 +33,6 @@ CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_MULTIPATH=y CONFIG_IP_ROUTE_VERBOSE=y CONFIG_SYN_COOKIES=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set CONFIG_INET_DIAG=m CONFIG_TCP_CONG_ADVANCED=y CONFIG_TCP_CONG_CUBIC=m @@ -162,5 +159,4 @@ CONFIG_SQUASHFS=y CONFIG_CRYPTO_TEST=m # CONFIG_CRYPTO_HW is not set CONFIG_CRC16=m -# CONFIG_ENABLE_MUST_CHECK is not set CONFIG_STRIP_ASM_SYMS=y diff --git a/arch/mips/configs/rbtx49xx_defconfig b/arch/mips/configs/rbtx49xx_defconfig index f8212a813be7..30c195f28278 100644 --- a/arch/mips/configs/rbtx49xx_defconfig +++ b/arch/mips/configs/rbtx49xx_defconfig @@ -21,9 +21,6 @@ CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_PNP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_IPV6 is not set # CONFIG_WIRELESS is not set CONFIG_MTD=y @@ -51,7 +48,6 @@ CONFIG_TC35815=y CONFIG_SERIAL_TXX9_CONSOLE=y CONFIG_SERIAL_TXX9_STDSERIAL=y CONFIG_SPI=y -CONFIG_SPI_TXX9=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_TXX9_WDT=m @@ -65,8 +61,6 @@ CONFIG_SND=m # CONFIG_SND_SPI is not set # CONFIG_SND_MIPS is not set CONFIG_SND_SOC=m -CONFIG_SND_SOC_TXX9ACLC=m -CONFIG_SND_SOC_TXX9ACLC_GENERIC=m # CONFIG_USB_SUPPORT is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -78,7 +72,6 @@ CONFIG_RTC_CLASS=y CONFIG_RTC_INTF_DEV_UIE_EMUL=y CONFIG_RTC_DRV_RS5C348=y CONFIG_RTC_DRV_DS1742=y -CONFIG_RTC_DRV_TX4939=y CONFIG_DMADEVICES=y CONFIG_TXX9_DMAC=m # CONFIG_DNOTIFY is not set diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig index 7d6f235e8ccb..9932a593e3c3 100644 --- a/arch/mips/configs/rm200_defconfig +++ b/arch/mips/configs/rm200_defconfig @@ -29,9 +29,6 @@ CONFIG_NET_IPIP=m CONFIG_IP_MROUTE=y CONFIG_IP_PIMSM_V1=y CONFIG_IP_PIMSM_V2=y -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m CONFIG_TCP_MD5SIG=y CONFIG_IPV6_ROUTER_PREF=y CONFIG_IPV6_ROUTE_INFO=y @@ -39,7 +36,6 @@ CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m CONFIG_IPV6_MIP6=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m CONFIG_IPV6_TUNNEL=m CONFIG_IPV6_MULTIPLE_TABLES=y CONFIG_IPV6_SUBTREES=y @@ -116,7 +112,6 @@ CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m -CONFIG_DECNET_NF_GRABULATOR=m CONFIG_BRIDGE_NF_EBTABLES=m CONFIG_BRIDGE_EBT_BROUTE=m CONFIG_BRIDGE_EBT_T_FILTER=m @@ -137,7 +132,6 @@ CONFIG_BRIDGE_EBT_REDIRECT=m CONFIG_BRIDGE_EBT_SNAT=m CONFIG_BRIDGE_EBT_LOG=m CONFIG_BRIDGE=m -CONFIG_DECNET=m CONFIG_NET_SCHED=y CONFIG_NET_SCH_CBQ=m CONFIG_NET_SCH_HTB=m @@ -192,9 +186,7 @@ CONFIG_PARIDE_KTTI=m CONFIG_PARIDE_ON20=m CONFIG_PARIDE_ON26=m CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_SX8=m CONFIG_BLK_DEV_RAM=m CONFIG_CDROM_PKTCDVD=m CONFIG_ATA_OVER_ETH=m @@ -400,7 +392,6 @@ CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m diff --git a/arch/mips/configs/rt305x_defconfig b/arch/mips/configs/rt305x_defconfig index eb359db15dba..bf017d493002 100644 --- a/arch/mips/configs/rt305x_defconfig +++ b/arch/mips/configs/rt305x_defconfig @@ -35,9 +35,6 @@ CONFIG_IP_ROUTE_VERBOSE=y CONFIG_IP_MROUTE=y CONFIG_IP_MROUTE_MULTIPLE_TABLES=y CONFIG_SYN_COOKIES=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_DIAG is not set CONFIG_TCP_CONG_ADVANCED=y # CONFIG_TCP_CONG_BIC is not set @@ -140,7 +137,6 @@ CONFIG_CRC32_SARWATE=y # CONFIG_XZ_DEC_ARMTHUMB is not set # CONFIG_XZ_DEC_SPARC is not set CONFIG_PRINTK_TIME=y -# CONFIG_ENABLE_MUST_CHECK is not set CONFIG_STRIP_ASM_SYMS=y CONFIG_DEBUG_FS=y CONFIG_MAGIC_SYSRQ=y diff --git a/arch/mips/configs/sb1250_swarm_defconfig b/arch/mips/configs/sb1250_swarm_defconfig index de94bf756a93..030186f89501 100644 --- a/arch/mips/configs/sb1250_swarm_defconfig +++ b/arch/mips/configs/sb1250_swarm_defconfig @@ -88,7 +88,6 @@ CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m @@ -96,7 +95,6 @@ CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_SALSA20=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_DEFLATE=m diff --git a/arch/mips/configs/vocore2_defconfig b/arch/mips/configs/vocore2_defconfig index a14f8ea5c386..0722a3bf03c0 100644 --- a/arch/mips/configs/vocore2_defconfig +++ b/arch/mips/configs/vocore2_defconfig @@ -35,9 +35,6 @@ CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_DIAG is not set # CONFIG_IPV6 is not set # CONFIG_WIRELESS is not set diff --git a/arch/mips/configs/xway_defconfig b/arch/mips/configs/xway_defconfig index eeb689f715cb..eb5acf1f24ae 100644 --- a/arch/mips/configs/xway_defconfig +++ b/arch/mips/configs/xway_defconfig @@ -37,9 +37,6 @@ CONFIG_IP_ROUTE_VERBOSE=y CONFIG_IP_MROUTE=y CONFIG_IP_MROUTE_MULTIPLE_TABLES=y CONFIG_SYN_COOKIES=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_DIAG is not set CONFIG_TCP_CONG_ADVANCED=y # CONFIG_TCP_CONG_BIC is not set @@ -146,7 +143,6 @@ CONFIG_CRYPTO_ARC4=m CONFIG_CRC_ITU_T=m CONFIG_CRC32_SARWATE=y CONFIG_PRINTK_TIME=y -# CONFIG_ENABLE_MUST_CHECK is not set CONFIG_STRIP_ASM_SYMS=y CONFIG_DEBUG_FS=y CONFIG_MAGIC_SYSRQ=y diff --git a/arch/mips/include/asm/irq.h b/arch/mips/include/asm/irq.h index 57561e0e6e8d..44f9824c1d8c 100644 --- a/arch/mips/include/asm/irq.h +++ b/arch/mips/include/asm/irq.h @@ -63,10 +63,6 @@ extern void do_domain_IRQ(struct irq_domain *domain, unsigned int irq); extern void arch_init_irq(void); extern void spurious_interrupt(void); -extern int allocate_irqno(void); -extern void alloc_legacy_irqno(void); -extern void free_irqno(unsigned int irq); - /* * Before R2 the timer and performance counter interrupts were both fixed to * IE7. Since R2 their number has to be read from the c0_intctl register. diff --git a/arch/mips/include/asm/mach-ar7/ar7.h b/arch/mips/include/asm/mach-ar7/ar7.h index cbe75ade3277..1e8621a6afa3 100644 --- a/arch/mips/include/asm/mach-ar7/ar7.h +++ b/arch/mips/include/asm/mach-ar7/ar7.h @@ -104,8 +104,6 @@ struct plat_dsl_data { int reset_bit_sar; }; -extern int ar7_cpu_clock, ar7_bus_clock, ar7_dsp_clock; - static inline int ar7_is_titan(void) { return (readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x24)) & 0xffff) == diff --git a/arch/mips/include/asm/octeon/cvmx-fpa.h b/arch/mips/include/asm/octeon/cvmx-fpa.h index 29ae63606ab4..f6dfcca97f19 100644 --- a/arch/mips/include/asm/octeon/cvmx-fpa.h +++ b/arch/mips/include/asm/octeon/cvmx-fpa.h @@ -264,26 +264,6 @@ static inline void cvmx_fpa_free(void *ptr, uint64_t pool, } /** - * Setup a FPA pool to control a new block of memory. - * This can only be called once per pool. Make sure proper - * locking enforces this. - * - * @pool: Pool to initialize - * 0 <= pool < 8 - * @name: Constant character string to name this pool. - * String is not copied. - * @buffer: Pointer to the block of memory to use. This must be - * accessible by all processors and external hardware. - * @block_size: Size for each block controlled by the FPA - * @num_blocks: Number of blocks - * - * Returns 0 on Success, - * -1 on failure - */ -extern int cvmx_fpa_setup_pool(uint64_t pool, const char *name, void *buffer, - uint64_t block_size, uint64_t num_blocks); - -/** * Shutdown a Memory pool and validate that it had all of * the buffers originally placed in it. This should only be * called by one processor after all hardware has finished diff --git a/arch/mips/include/asm/octeon/octeon.h b/arch/mips/include/asm/octeon/octeon.h index 7e714aefc76d..5c1d726c702f 100644 --- a/arch/mips/include/asm/octeon/octeon.h +++ b/arch/mips/include/asm/octeon/octeon.h @@ -43,7 +43,6 @@ extern int octeon_get_southbridge_interrupt(void); extern int octeon_get_boot_coremask(void); extern int octeon_get_boot_num_arguments(void); extern const char *octeon_get_boot_argument(int arg); -extern void octeon_hal_setup_reserved32(void); extern void octeon_user_io_init(void); extern void octeon_init_cvmcount(void); diff --git a/arch/mips/include/asm/octeon/pci-octeon.h b/arch/mips/include/asm/octeon/pci-octeon.h index b12d9a3fbfb6..2f46f6c6e3d0 100644 --- a/arch/mips/include/asm/octeon/pci-octeon.h +++ b/arch/mips/include/asm/octeon/pci-octeon.h @@ -64,6 +64,4 @@ enum octeon_dma_bar_type { extern enum octeon_dma_bar_type octeon_dma_bar_type; void octeon_pci_dma_init(void); -extern char *octeon_swiotlb; - #endif diff --git a/arch/mips/include/asm/sibyte/sb1250.h b/arch/mips/include/asm/sibyte/sb1250.h index dbde5f93f0dd..495b31925ed7 100644 --- a/arch/mips/include/asm/sibyte/sb1250.h +++ b/arch/mips/include/asm/sibyte/sb1250.h @@ -32,7 +32,6 @@ extern unsigned int soc_type; extern unsigned int periph_rev; extern unsigned int zbbus_mhz; -extern void sb1250_time_init(void); extern void sb1250_mask_irq(int cpu, int irq); extern void sb1250_unmask_irq(int cpu, int irq); diff --git a/arch/mips/include/asm/sn/gda.h b/arch/mips/include/asm/sn/gda.h index d52f81620661..5b8c96d5b587 100644 --- a/arch/mips/include/asm/sn/gda.h +++ b/arch/mips/include/asm/sn/gda.h @@ -16,8 +16,6 @@ #include <asm/sn/addrs.h> -#define GDA_MAGIC 0x58464552 - /* * GDA Version History * diff --git a/arch/mips/include/asm/sni.h b/arch/mips/include/asm/sni.h index 7dfa297ce597..7fb6656a6bfd 100644 --- a/arch/mips/include/asm/sni.h +++ b/arch/mips/include/asm/sni.h @@ -226,9 +226,6 @@ extern void sni_pcit_cplus_irq_init(void); extern void sni_rm200_irq_init(void); extern void sni_pcimt_irq_init(void); -/* timer inits */ -extern void sni_cpu_time_init(void); - /* eisa init for RM200/400 */ #ifdef CONFIG_EISA extern int sni_eisa_root_init(void); diff --git a/arch/mips/include/asm/termios.h b/arch/mips/include/asm/termios.h deleted file mode 100644 index bc29eeacc55a..000000000000 --- a/arch/mips/include/asm/termios.h +++ /dev/null @@ -1,105 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1995, 1996, 2000, 2001 by Ralf Baechle - * Copyright (C) 2000, 2001 Silicon Graphics, Inc. - */ -#ifndef _ASM_TERMIOS_H -#define _ASM_TERMIOS_H - -#include <linux/uaccess.h> -#include <uapi/asm/termios.h> - -/* - * intr=^C quit=^\ erase=del kill=^U - * vmin=\1 vtime=\0 eol2=\0 swtc=\0 - * start=^Q stop=^S susp=^Z vdsusp= - * reprint=^R discard=^U werase=^W lnext=^V - * eof=^D eol=\0 - */ -#define INIT_C_CC "\003\034\177\025\1\0\0\0\021\023\032\0\022\017\027\026\004\0" - -#include <linux/string.h> - -/* - * Translate a "termio" structure into a "termios". Ugh. - */ -static inline int user_termio_to_kernel_termios(struct ktermios *termios, - struct termio __user *termio) -{ - unsigned short iflag, oflag, cflag, lflag; - unsigned int err; - - if (!access_ok(termio, sizeof(struct termio))) - return -EFAULT; - - err = __get_user(iflag, &termio->c_iflag); - termios->c_iflag = (termios->c_iflag & 0xffff0000) | iflag; - err |=__get_user(oflag, &termio->c_oflag); - termios->c_oflag = (termios->c_oflag & 0xffff0000) | oflag; - err |=__get_user(cflag, &termio->c_cflag); - termios->c_cflag = (termios->c_cflag & 0xffff0000) | cflag; - err |=__get_user(lflag, &termio->c_lflag); - termios->c_lflag = (termios->c_lflag & 0xffff0000) | lflag; - err |=__get_user(termios->c_line, &termio->c_line); - if (err) - return -EFAULT; - - if (__copy_from_user(termios->c_cc, termio->c_cc, NCC)) - return -EFAULT; - - return 0; -} - -/* - * Translate a "termios" structure into a "termio". Ugh. - */ -static inline int kernel_termios_to_user_termio(struct termio __user *termio, - struct ktermios *termios) -{ - int err; - - if (!access_ok(termio, sizeof(struct termio))) - return -EFAULT; - - err = __put_user(termios->c_iflag, &termio->c_iflag); - err |= __put_user(termios->c_oflag, &termio->c_oflag); - err |= __put_user(termios->c_cflag, &termio->c_cflag); - err |= __put_user(termios->c_lflag, &termio->c_lflag); - err |= __put_user(termios->c_line, &termio->c_line); - if (err) - return -EFAULT; - - if (__copy_to_user(termio->c_cc, termios->c_cc, NCC)) - return -EFAULT; - - return 0; -} - -static inline int user_termios_to_kernel_termios(struct ktermios __user *k, - struct termios2 *u) -{ - return copy_from_user(k, u, sizeof(struct termios2)) ? -EFAULT : 0; -} - -static inline int kernel_termios_to_user_termios(struct termios2 __user *u, - struct ktermios *k) -{ - return copy_to_user(u, k, sizeof(struct termios2)) ? -EFAULT : 0; -} - -static inline int user_termios_to_kernel_termios_1(struct ktermios *k, - struct termios __user *u) -{ - return copy_from_user(k, u, sizeof(struct termios)) ? -EFAULT : 0; -} - -static inline int kernel_termios_to_user_termios_1(struct termios __user *u, - struct ktermios *k) -{ - return copy_to_user(u, k, sizeof(struct termios)) ? -EFAULT : 0; -} - -#endif /* _ASM_TERMIOS_H */ diff --git a/arch/mips/kernel/prom.c b/arch/mips/kernel/prom.c index 7db6ff9aed7d..f88ce78e13e3 100644 --- a/arch/mips/kernel/prom.c +++ b/arch/mips/kernel/prom.c @@ -26,7 +26,7 @@ __init void mips_set_machine_name(const char *name) if (name == NULL) return; - strlcpy(mips_machine_name, name, sizeof(mips_machine_name)); + strscpy(mips_machine_name, name, sizeof(mips_machine_name)); pr_info("MIPS: machine is %s\n", mips_get_machine_name()); } @@ -52,9 +52,9 @@ int __init __dt_register_buses(const char *bus0, const char *bus1) if (!of_have_populated_dt()) panic("device tree not present"); - strlcpy(of_ids[0].compatible, bus0, sizeof(of_ids[0].compatible)); + strscpy(of_ids[0].compatible, bus0, sizeof(of_ids[0].compatible)); if (bus1) { - strlcpy(of_ids[1].compatible, bus1, + strscpy(of_ids[1].compatible, bus1, sizeof(of_ids[1].compatible)); } diff --git a/arch/mips/kernel/relocate.c b/arch/mips/kernel/relocate.c index 56b51de2dc51..58fc8d089402 100644 --- a/arch/mips/kernel/relocate.c +++ b/arch/mips/kernel/relocate.c @@ -340,7 +340,7 @@ void *__init relocate_kernel(void) early_init_dt_scan(fdt); if (boot_command_line[0]) { /* Boot command line was passed in device tree */ - strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE); + strscpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE); } #endif /* CONFIG_USE_OF */ diff --git a/arch/mips/kernel/segment.c b/arch/mips/kernel/segment.c index 0a9bd7b0983b..24560501c70d 100644 --- a/arch/mips/kernel/segment.c +++ b/arch/mips/kernel/segment.c @@ -46,7 +46,7 @@ static void build_segment_config(char *str, unsigned int cfg) ((cfg & MIPS_SEGCFG_EU) >> MIPS_SEGCFG_EU_SHIFT)); } -static int show_segments(struct seq_file *m, void *v) +static int segments_show(struct seq_file *m, void *v) { unsigned int segcfg; char str[42]; @@ -80,18 +80,7 @@ static int show_segments(struct seq_file *m, void *v) return 0; } - -static int segments_open(struct inode *inode, struct file *file) -{ - return single_open(file, show_segments, NULL); -} - -static const struct file_operations segments_fops = { - .open = segments_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; +DEFINE_SHOW_ATTRIBUTE(segments); static int __init segments_info(void) { diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index 2ca156a5b231..39c79f67c7a3 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -42,6 +42,7 @@ #include <asm/setup.h> #include <asm/smp-ops.h> #include <asm/prom.h> +#include <asm/fw/fw.h> #ifdef CONFIG_MIPS_ELF_APPENDED_DTB char __section(".appended_dtb") __appended_dtb[0x100000]; @@ -756,6 +757,24 @@ static void __init prefill_possible_map(void) static inline void prefill_possible_map(void) {} #endif +static void __init setup_rng_seed(void) +{ + char *rng_seed_hex = fw_getenv("rngseed"); + u8 rng_seed[512]; + size_t len; + + if (!rng_seed_hex) + return; + + len = min(sizeof(rng_seed), strlen(rng_seed_hex) / 2); + if (hex2bin(rng_seed, rng_seed_hex, len)) + return; + + add_bootloader_randomness(rng_seed, len); + memzero_explicit(rng_seed, len); + memzero_explicit(rng_seed_hex, len * 2); +} + void __init setup_arch(char **cmdline_p) { cpu_probe(); @@ -786,6 +805,8 @@ void __init setup_arch(char **cmdline_p) paging_init(); memblock_dump_all(); + + setup_rng_seed(); } unsigned long kernelsp[NR_CPUS]; diff --git a/arch/mips/lantiq/clk.c b/arch/mips/lantiq/clk.c index 7a623684d9b5..2d5a0bcb0cec 100644 --- a/arch/mips/lantiq/clk.c +++ b/arch/mips/lantiq/clk.c @@ -50,6 +50,7 @@ struct clk *clk_get_io(void) { return &cpu_clk_generic[2]; } +EXPORT_SYMBOL_GPL(clk_get_io); struct clk *clk_get_ppe(void) { diff --git a/arch/mips/lantiq/prom.c b/arch/mips/lantiq/prom.c index c731082a0c42..be4829cc7a3a 100644 --- a/arch/mips/lantiq/prom.c +++ b/arch/mips/lantiq/prom.c @@ -34,6 +34,14 @@ unsigned long physical_memsize = 0L; */ static struct ltq_soc_info soc_info; +/* + * These structs are used to override vsmp_init_secondary() + */ +#if defined(CONFIG_MIPS_MT_SMP) +extern const struct plat_smp_ops vsmp_smp_ops; +static struct plat_smp_ops lantiq_smp_ops; +#endif + const char *get_system_type(void) { return soc_info.sys_type; @@ -84,6 +92,17 @@ void __init plat_mem_setup(void) __dt_setup_arch(dtb); } +#if defined(CONFIG_MIPS_MT_SMP) +static void lantiq_init_secondary(void) +{ + /* + * MIPS CPU startup function vsmp_init_secondary() will only + * enable some of the interrupts for the second CPU/VPE. + */ + set_c0_status(ST0_IM); +} +#endif + void __init prom_init(void) { /* call the soc specific detetcion code and get it to fill soc_info */ @@ -95,7 +114,10 @@ void __init prom_init(void) prom_init_cmdline(); #if defined(CONFIG_MIPS_MT_SMP) - if (register_vsmp_smp_ops()) - panic("failed to register_vsmp_smp_ops()"); + if (cpu_has_mipsmt) { + lantiq_smp_ops = vsmp_smp_ops; + lantiq_smp_ops.init_secondary = lantiq_init_secondary; + register_smp_ops(&lantiq_smp_ops); + } #endif } diff --git a/arch/mips/lantiq/xway/vmmc.c b/arch/mips/lantiq/xway/vmmc.c index 7a14da8d9d15..2796e87dfcae 100644 --- a/arch/mips/lantiq/xway/vmmc.c +++ b/arch/mips/lantiq/xway/vmmc.c @@ -4,9 +4,10 @@ * Copyright (C) 2012 John Crispin <john@phrozen.org> */ +#include <linux/err.h> #include <linux/export.h> +#include <linux/gpio/consumer.h> #include <linux/of_platform.h> -#include <linux/of_gpio.h> #include <linux/dma-mapping.h> #include <lantiq_soc.h> @@ -25,23 +26,28 @@ EXPORT_SYMBOL(ltq_get_cp1_base); static int vmmc_probe(struct platform_device *pdev) { #define CP1_SIZE (1 << 20) + struct gpio_desc *gpio; int gpio_count; dma_addr_t dma; + int error; cp1_base = (void *) CPHYSADDR(dma_alloc_coherent(&pdev->dev, CP1_SIZE, &dma, GFP_KERNEL)); - gpio_count = of_gpio_count(pdev->dev.of_node); + gpio_count = gpiod_count(&pdev->dev, NULL); while (gpio_count > 0) { - enum of_gpio_flags flags; - int gpio = of_get_gpio_flags(pdev->dev.of_node, - --gpio_count, &flags); - if (gpio_request(gpio, "vmmc-relay")) + gpio = devm_gpiod_get_index(&pdev->dev, + NULL, --gpio_count, GPIOD_OUT_HIGH); + error = PTR_ERR_OR_ZERO(gpio); + if (error) { + dev_err(&pdev->dev, + "failed to request GPIO idx %d: %d\n", + gpio_count, error); continue; - dev_info(&pdev->dev, "requested GPIO %d\n", gpio); - gpio_direction_output(gpio, - (flags & OF_GPIO_ACTIVE_LOW) ? (0) : (1)); + } + + gpiod_set_consumer_name(gpio, "vmmc-relay"); } dev_info(&pdev->dev, "reserved %dMB at 0x%p", CP1_SIZE >> 20, cp1_base); diff --git a/arch/mips/lib/bswapdi.c b/arch/mips/lib/bswapdi.c index fcef74084492..88242dc7de17 100644 --- a/arch/mips/lib/bswapdi.c +++ b/arch/mips/lib/bswapdi.c @@ -1,17 +1,13 @@ // SPDX-License-Identifier: GPL-2.0 #include <linux/export.h> #include <linux/compiler.h> +#include <uapi/linux/swab.h> + +/* To silence -Wmissing-prototypes. */ +unsigned long long __bswapdi2(unsigned long long u); unsigned long long notrace __bswapdi2(unsigned long long u) { - return (((u) & 0xff00000000000000ull) >> 56) | - (((u) & 0x00ff000000000000ull) >> 40) | - (((u) & 0x0000ff0000000000ull) >> 24) | - (((u) & 0x000000ff00000000ull) >> 8) | - (((u) & 0x00000000ff000000ull) << 8) | - (((u) & 0x0000000000ff0000ull) << 24) | - (((u) & 0x000000000000ff00ull) << 40) | - (((u) & 0x00000000000000ffull) << 56); + return ___constant_swab64(u); } - EXPORT_SYMBOL(__bswapdi2); diff --git a/arch/mips/lib/bswapsi.c b/arch/mips/lib/bswapsi.c index 22d8e4f6d66e..2ed655497de5 100644 --- a/arch/mips/lib/bswapsi.c +++ b/arch/mips/lib/bswapsi.c @@ -1,13 +1,13 @@ // SPDX-License-Identifier: GPL-2.0 #include <linux/export.h> #include <linux/compiler.h> +#include <uapi/linux/swab.h> + +/* To silence -Wmissing-prototypes. */ +unsigned int __bswapsi2(unsigned int u); unsigned int notrace __bswapsi2(unsigned int u) { - return (((u) & 0xff000000) >> 24) | - (((u) & 0x00ff0000) >> 8) | - (((u) & 0x0000ff00) << 8) | - (((u) & 0x000000ff) << 24); + return ___constant_swab32(u); } - EXPORT_SYMBOL(__bswapsi2); diff --git a/arch/mips/loongson2ef/common/pci.c b/arch/mips/loongson2ef/common/pci.c index 200916925e95..7d9ea51e8c01 100644 --- a/arch/mips/loongson2ef/common/pci.c +++ b/arch/mips/loongson2ef/common/pci.c @@ -73,8 +73,6 @@ static void __init setup_pcimap(void) #endif } -extern int sbx00_acpi_init(void); - static int __init pcibios_init(void) { setup_pcimap(); diff --git a/arch/mips/loongson32/common/platform.c b/arch/mips/loongson32/common/platform.c index 794c96c2a4cd..311dc1580bbd 100644 --- a/arch/mips/loongson32/common/platform.c +++ b/arch/mips/loongson32/common/platform.c @@ -98,7 +98,7 @@ int ls1x_eth_mux_init(struct platform_device *pdev, void *priv) if (plat_dat->bus_id) { __raw_writel(__raw_readl(LS1X_MUX_CTRL0) | GMAC1_USE_UART1 | GMAC1_USE_UART0, LS1X_MUX_CTRL0); - switch (plat_dat->interface) { + switch (plat_dat->phy_interface) { case PHY_INTERFACE_MODE_RGMII: val &= ~(GMAC1_USE_TXCLK | GMAC1_USE_PWM23); break; @@ -107,12 +107,12 @@ int ls1x_eth_mux_init(struct platform_device *pdev, void *priv) break; default: pr_err("unsupported mii mode %d\n", - plat_dat->interface); + plat_dat->phy_interface); return -ENOTSUPP; } val &= ~GMAC1_SHUT; } else { - switch (plat_dat->interface) { + switch (plat_dat->phy_interface) { case PHY_INTERFACE_MODE_RGMII: val &= ~(GMAC0_USE_TXCLK | GMAC0_USE_PWM01); break; @@ -121,7 +121,7 @@ int ls1x_eth_mux_init(struct platform_device *pdev, void *priv) break; default: pr_err("unsupported mii mode %d\n", - plat_dat->interface); + plat_dat->phy_interface); return -ENOTSUPP; } val &= ~GMAC0_SHUT; @@ -131,7 +131,7 @@ int ls1x_eth_mux_init(struct platform_device *pdev, void *priv) plat_dat = dev_get_platdata(&pdev->dev); val &= ~PHY_INTF_SELI; - if (plat_dat->interface == PHY_INTERFACE_MODE_RMII) + if (plat_dat->phy_interface == PHY_INTERFACE_MODE_RMII) val |= 0x4 << PHY_INTF_SELI_SHIFT; __raw_writel(val, LS1X_MUX_CTRL1); @@ -146,9 +146,9 @@ static struct plat_stmmacenet_data ls1x_eth0_pdata = { .bus_id = 0, .phy_addr = -1, #if defined(CONFIG_LOONGSON1_LS1B) - .interface = PHY_INTERFACE_MODE_MII, + .phy_interface = PHY_INTERFACE_MODE_MII, #elif defined(CONFIG_LOONGSON1_LS1C) - .interface = PHY_INTERFACE_MODE_RMII, + .phy_interface = PHY_INTERFACE_MODE_RMII, #endif .mdio_bus_data = &ls1x_mdio_bus_data, .dma_cfg = &ls1x_eth_dma_cfg, @@ -186,7 +186,7 @@ struct platform_device ls1x_eth0_pdev = { static struct plat_stmmacenet_data ls1x_eth1_pdata = { .bus_id = 1, .phy_addr = -1, - .interface = PHY_INTERFACE_MODE_MII, + .phy_interface = PHY_INTERFACE_MODE_MII, .mdio_bus_data = &ls1x_mdio_bus_data, .dma_cfg = &ls1x_eth_dma_cfg, .has_gmac = 1, diff --git a/arch/mips/loongson32/ls1c/board.c b/arch/mips/loongson32/ls1c/board.c index e9de6da0ce51..9dcfe9de55b0 100644 --- a/arch/mips/loongson32/ls1c/board.c +++ b/arch/mips/loongson32/ls1c/board.c @@ -15,7 +15,6 @@ static struct platform_device *ls1c_platform_devices[] __initdata = { static int __init ls1c_platform_init(void) { ls1x_serial_set_uartclk(&ls1x_uart_pdev); - ls1x_rtc_set_extclk(&ls1x_rtc_pdev); return platform_add_devices(ls1c_platform_devices, ARRAY_SIZE(ls1c_platform_devices)); diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c index 587cf1d115e8..265bc57819df 100644 --- a/arch/mips/math-emu/cp1emu.c +++ b/arch/mips/math-emu/cp1emu.c @@ -1032,7 +1032,7 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx, */ if (dec_insn.micro_mips_mode) { /* - * If next instruction is a 16-bit instruction, then it + * If next instruction is a 16-bit instruction, then * it cannot be a FPU instruction. This could happen * since we can be called for non-FPU instructions. */ diff --git a/arch/mips/net/bpf_jit_comp32.c b/arch/mips/net/bpf_jit_comp32.c index 83c975d5cca2..ace5db3fbd17 100644 --- a/arch/mips/net/bpf_jit_comp32.c +++ b/arch/mips/net/bpf_jit_comp32.c @@ -1377,11 +1377,19 @@ void build_prologue(struct jit_context *ctx) int stack, saved, locals, reserved; /* + * In the unlikely event that the TCC limit is raised to more + * than 16 bits, it is clamped to the maximum value allowed for + * the generated code (0xffff). It is better fail to compile + * instead of degrading gracefully. + */ + BUILD_BUG_ON(MAX_TAIL_CALL_CNT > 0xffff); + + /* * The first two instructions initialize TCC in the reserved (for us) * 16-byte area in the parent's stack frame. On a tail call, the * calling function jumps into the prologue after these instructions. */ - emit(ctx, ori, MIPS_R_T9, MIPS_R_ZERO, min(MAX_TAIL_CALL_CNT, 0xffff)); + emit(ctx, ori, MIPS_R_T9, MIPS_R_ZERO, MAX_TAIL_CALL_CNT); emit(ctx, sw, MIPS_R_T9, 0, MIPS_R_SP); /* diff --git a/arch/mips/net/bpf_jit_comp64.c b/arch/mips/net/bpf_jit_comp64.c index 6475828ffb36..0e7c1bdcf914 100644 --- a/arch/mips/net/bpf_jit_comp64.c +++ b/arch/mips/net/bpf_jit_comp64.c @@ -548,11 +548,19 @@ void build_prologue(struct jit_context *ctx) int stack, saved, locals, reserved; /* + * In the unlikely event that the TCC limit is raised to more + * than 16 bits, it is clamped to the maximum value allowed for + * the generated code (0xffff). It is better fail to compile + * instead of degrading gracefully. + */ + BUILD_BUG_ON(MAX_TAIL_CALL_CNT > 0xffff); + + /* * The first instruction initializes the tail call count register. * On a tail call, the calling function jumps into the prologue * after this instruction. */ - emit(ctx, ori, tc, MIPS_R_ZERO, min(MAX_TAIL_CALL_CNT, 0xffff)); + emit(ctx, ori, tc, MIPS_R_ZERO, MAX_TAIL_CALL_CNT); /* === Entry-point for tail calls === */ diff --git a/arch/mips/pci/pci-ar2315.c b/arch/mips/pci/pci-ar2315.c index 30e0922f4cea..e17d862cfa4c 100644 --- a/arch/mips/pci/pci-ar2315.c +++ b/arch/mips/pci/pci-ar2315.c @@ -2,7 +2,7 @@ /* */ -/** +/* * Both AR2315 and AR2316 chips have PCI interface unit, which supports DMA * and interrupt. PCI interface supports MMIO access method, but does not * seem to support I/O ports. diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c index 1ca42f482130..8d16cd021f60 100644 --- a/arch/mips/pci/pci-lantiq.c +++ b/arch/mips/pci/pci-lantiq.c @@ -9,11 +9,11 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/delay.h> +#include <linux/gpio/consumer.h> #include <linux/mm.h> #include <linux/vmalloc.h> #include <linux/clk.h> #include <linux/of_platform.h> -#include <linux/of_gpio.h> #include <linux/of_irq.h> #include <linux/of_pci.h> @@ -62,7 +62,7 @@ __iomem void *ltq_pci_mapped_cfg; static __iomem void *ltq_pci_membase; -static int reset_gpio; +static struct gpio_desc *reset_gpio; static struct clk *clk_pci, *clk_external; static struct resource pci_io_resource; static struct resource pci_mem_resource; @@ -95,6 +95,7 @@ static int ltq_pci_startup(struct platform_device *pdev) struct device_node *node = pdev->dev.of_node; const __be32 *req_mask, *bus_clk; u32 temp_buffer; + int error; /* get our clocks */ clk_pci = clk_get(&pdev->dev, NULL); @@ -123,17 +124,14 @@ static int ltq_pci_startup(struct platform_device *pdev) clk_disable(clk_external); /* setup reset gpio used by pci */ - reset_gpio = of_get_named_gpio(node, "gpio-reset", 0); - if (gpio_is_valid(reset_gpio)) { - int ret = devm_gpio_request(&pdev->dev, - reset_gpio, "pci-reset"); - if (ret) { - dev_err(&pdev->dev, - "failed to request gpio %d\n", reset_gpio); - return ret; - } - gpio_direction_output(reset_gpio, 1); + reset_gpio = devm_gpiod_get_optional(&pdev->dev, "reset", + GPIOD_OUT_LOW); + error = PTR_ERR_OR_ZERO(reset_gpio); + if (error) { + dev_err(&pdev->dev, "failed to request gpio: %d\n", error); + return error; } + gpiod_set_consumer_name(reset_gpio, "pci_reset"); /* enable auto-switching between PCI and EBU */ ltq_pci_w32(0xa, PCI_CR_CLK_CTRL); @@ -195,11 +193,11 @@ static int ltq_pci_startup(struct platform_device *pdev) ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_IEN) | 0x10, LTQ_EBU_PCC_IEN); /* toggle reset pin */ - if (gpio_is_valid(reset_gpio)) { - __gpio_set_value(reset_gpio, 0); + if (reset_gpio) { + gpiod_set_value_cansleep(reset_gpio, 1); wmb(); mdelay(1); - __gpio_set_value(reset_gpio, 1); + gpiod_set_value_cansleep(reset_gpio, 0); } return 0; } diff --git a/arch/mips/pic32/pic32mzda/init.c b/arch/mips/pic32/pic32mzda/init.c index d9c8c4e46aff..08c46cf122d7 100644 --- a/arch/mips/pic32/pic32mzda/init.c +++ b/arch/mips/pic32/pic32mzda/init.c @@ -44,7 +44,7 @@ void __init plat_mem_setup(void) pr_info(" builtin_cmdline : %s\n", CONFIG_CMDLINE); #endif if (dtb != __dtb_start) - strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE); + strscpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE); #ifdef CONFIG_EARLY_PRINTK fw_init_early_console(-1); diff --git a/arch/mips/ralink/bootrom.c b/arch/mips/ralink/bootrom.c index 94ca8379b83c..8c8cc0a81ed8 100644 --- a/arch/mips/ralink/bootrom.c +++ b/arch/mips/ralink/bootrom.c @@ -18,22 +18,11 @@ static int bootrom_show(struct seq_file *s, void *unused) return 0; } - -static int bootrom_open(struct inode *inode, struct file *file) -{ - return single_open(file, bootrom_show, NULL); -} - -static const struct file_operations bootrom_file_ops = { - .open = bootrom_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; +DEFINE_SHOW_ATTRIBUTE(bootrom); static int __init bootrom_setup(void) { - debugfs_create_file("bootrom", 0444, NULL, NULL, &bootrom_file_ops); + debugfs_create_file("bootrom", 0444, NULL, NULL, &bootrom_fops); return 0; } diff --git a/arch/mips/sgi-ip27/ip27-xtalk.c b/arch/mips/sgi-ip27/ip27-xtalk.c index e762886d1dda..5143d1cf8984 100644 --- a/arch/mips/sgi-ip27/ip27-xtalk.c +++ b/arch/mips/sgi-ip27/ip27-xtalk.c @@ -27,15 +27,18 @@ static void bridge_platform_create(nasid_t nasid, int widget, int masterwid) { struct xtalk_bridge_platform_data *bd; struct sgi_w1_platform_data *wd; - struct platform_device *pdev; + struct platform_device *pdev_wd; + struct platform_device *pdev_bd; struct resource w1_res; unsigned long offset; offset = NODE_OFFSET(nasid); wd = kzalloc(sizeof(*wd), GFP_KERNEL); - if (!wd) - goto no_mem; + if (!wd) { + pr_warn("xtalk:n%d/%x bridge create out of memory\n", nasid, widget); + return; + } snprintf(wd->dev_id, sizeof(wd->dev_id), "bridge-%012lx", offset + (widget << SWIN_SIZE_BITS)); @@ -46,24 +49,35 @@ static void bridge_platform_create(nasid_t nasid, int widget, int masterwid) w1_res.end = w1_res.start + 3; w1_res.flags = IORESOURCE_MEM; - pdev = platform_device_alloc("sgi_w1", PLATFORM_DEVID_AUTO); - if (!pdev) { - kfree(wd); - goto no_mem; + pdev_wd = platform_device_alloc("sgi_w1", PLATFORM_DEVID_AUTO); + if (!pdev_wd) { + pr_warn("xtalk:n%d/%x bridge create out of memory\n", nasid, widget); + goto err_kfree_wd; + } + if (platform_device_add_resources(pdev_wd, &w1_res, 1)) { + pr_warn("xtalk:n%d/%x bridge failed to add platform resources.\n", nasid, widget); + goto err_put_pdev_wd; + } + if (platform_device_add_data(pdev_wd, wd, sizeof(*wd))) { + pr_warn("xtalk:n%d/%x bridge failed to add platform data.\n", nasid, widget); + goto err_put_pdev_wd; + } + if (platform_device_add(pdev_wd)) { + pr_warn("xtalk:n%d/%x bridge failed to add platform device.\n", nasid, widget); + goto err_put_pdev_wd; } - platform_device_add_resources(pdev, &w1_res, 1); - platform_device_add_data(pdev, wd, sizeof(*wd)); /* platform_device_add_data() duplicates the data */ kfree(wd); - platform_device_add(pdev); bd = kzalloc(sizeof(*bd), GFP_KERNEL); - if (!bd) - goto no_mem; - pdev = platform_device_alloc("xtalk-bridge", PLATFORM_DEVID_AUTO); - if (!pdev) { - kfree(bd); - goto no_mem; + if (!bd) { + pr_warn("xtalk:n%d/%x bridge create out of memory\n", nasid, widget); + goto err_unregister_pdev_wd; + } + pdev_bd = platform_device_alloc("xtalk-bridge", PLATFORM_DEVID_AUTO); + if (!pdev_bd) { + pr_warn("xtalk:n%d/%x bridge create out of memory\n", nasid, widget); + goto err_kfree_bd; } @@ -84,15 +98,31 @@ static void bridge_platform_create(nasid_t nasid, int widget, int masterwid) bd->io.flags = IORESOURCE_IO; bd->io_offset = offset; - platform_device_add_data(pdev, bd, sizeof(*bd)); + if (platform_device_add_data(pdev_bd, bd, sizeof(*bd))) { + pr_warn("xtalk:n%d/%x bridge failed to add platform data.\n", nasid, widget); + goto err_put_pdev_bd; + } + if (platform_device_add(pdev_bd)) { + pr_warn("xtalk:n%d/%x bridge failed to add platform device.\n", nasid, widget); + goto err_put_pdev_bd; + } /* platform_device_add_data() duplicates the data */ kfree(bd); - platform_device_add(pdev); pr_info("xtalk:n%d/%x bridge widget\n", nasid, widget); return; -no_mem: - pr_warn("xtalk:n%d/%x bridge create out of memory\n", nasid, widget); +err_put_pdev_bd: + platform_device_put(pdev_bd); +err_kfree_bd: + kfree(bd); +err_unregister_pdev_wd: + platform_device_unregister(pdev_wd); + return; +err_put_pdev_wd: + platform_device_put(pdev_wd); +err_kfree_wd: + kfree(wd); + return; } static int probe_one_port(nasid_t nasid, int widget, int masterwid) diff --git a/arch/mips/sgi-ip30/ip30-xtalk.c b/arch/mips/sgi-ip30/ip30-xtalk.c index 8129524421cb..7ceb2b23ea1c 100644 --- a/arch/mips/sgi-ip30/ip30-xtalk.c +++ b/arch/mips/sgi-ip30/ip30-xtalk.c @@ -40,12 +40,15 @@ static void bridge_platform_create(int widget, int masterwid) { struct xtalk_bridge_platform_data *bd; struct sgi_w1_platform_data *wd; - struct platform_device *pdev; + struct platform_device *pdev_wd; + struct platform_device *pdev_bd; struct resource w1_res; wd = kzalloc(sizeof(*wd), GFP_KERNEL); - if (!wd) - goto no_mem; + if (!wd) { + pr_warn("xtalk:%x bridge create out of memory\n", widget); + return; + } snprintf(wd->dev_id, sizeof(wd->dev_id), "bridge-%012lx", IP30_SWIN_BASE(widget)); @@ -56,24 +59,35 @@ static void bridge_platform_create(int widget, int masterwid) w1_res.end = w1_res.start + 3; w1_res.flags = IORESOURCE_MEM; - pdev = platform_device_alloc("sgi_w1", PLATFORM_DEVID_AUTO); - if (!pdev) { - kfree(wd); - goto no_mem; + pdev_wd = platform_device_alloc("sgi_w1", PLATFORM_DEVID_AUTO); + if (!pdev_wd) { + pr_warn("xtalk:%x bridge create out of memory\n", widget); + goto err_kfree_wd; + } + if (platform_device_add_resources(pdev_wd, &w1_res, 1)) { + pr_warn("xtalk:%x bridge failed to add platform resources.\n", widget); + goto err_put_pdev_wd; + } + if (platform_device_add_data(pdev_wd, wd, sizeof(*wd))) { + pr_warn("xtalk:%x bridge failed to add platform data.\n", widget); + goto err_put_pdev_wd; + } + if (platform_device_add(pdev_wd)) { + pr_warn("xtalk:%x bridge failed to add platform device.\n", widget); + goto err_put_pdev_wd; } - platform_device_add_resources(pdev, &w1_res, 1); - platform_device_add_data(pdev, wd, sizeof(*wd)); /* platform_device_add_data() duplicates the data */ kfree(wd); - platform_device_add(pdev); bd = kzalloc(sizeof(*bd), GFP_KERNEL); - if (!bd) - goto no_mem; - pdev = platform_device_alloc("xtalk-bridge", PLATFORM_DEVID_AUTO); - if (!pdev) { - kfree(bd); - goto no_mem; + if (!bd) { + pr_warn("xtalk:%x bridge create out of memory\n", widget); + goto err_unregister_pdev_wd; + } + pdev_bd = platform_device_alloc("xtalk-bridge", PLATFORM_DEVID_AUTO); + if (!pdev_bd) { + pr_warn("xtalk:%x bridge create out of memory\n", widget); + goto err_kfree_bd; } bd->bridge_addr = IP30_RAW_SWIN_BASE(widget); @@ -93,15 +107,31 @@ static void bridge_platform_create(int widget, int masterwid) bd->io.flags = IORESOURCE_IO; bd->io_offset = IP30_SWIN_BASE(widget); - platform_device_add_data(pdev, bd, sizeof(*bd)); + if (platform_device_add_data(pdev_bd, bd, sizeof(*bd))) { + pr_warn("xtalk:%x bridge failed to add platform data.\n", widget); + goto err_put_pdev_bd; + } + if (platform_device_add(pdev_bd)) { + pr_warn("xtalk:%x bridge failed to add platform device.\n", widget); + goto err_put_pdev_bd; + } /* platform_device_add_data() duplicates the data */ kfree(bd); - platform_device_add(pdev); pr_info("xtalk:%x bridge widget\n", widget); return; -no_mem: - pr_warn("xtalk:%x bridge create out of memory\n", widget); +err_put_pdev_bd: + platform_device_put(pdev_bd); +err_kfree_bd: + kfree(bd); +err_unregister_pdev_wd: + platform_device_unregister(pdev_wd); + return; +err_put_pdev_wd: + platform_device_put(pdev_wd); +err_kfree_wd: + kfree(wd); + return; } static unsigned int __init xbow_widget_active(s8 wid) diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c index 86f49c48fc34..2f08ad267a11 100644 --- a/arch/mips/sibyte/sb1250/irq.c +++ b/arch/mips/sibyte/sb1250/irq.c @@ -262,12 +262,6 @@ void __init arch_init_irq(void) __raw_writeq(tmp, IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MASK))); __raw_writeq(tmp, IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MASK))); - /* - * Note that the timer interrupts are also mapped, but this is - * done in sb1250_time_init(). Also, the profiling driver - * does its own management of IP7. - */ - /* Enable necessary IPs, disable the rest */ change_c0_status(ST0_IM, imask); } diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index 9aede2447011..a98940e64243 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -224,8 +224,18 @@ config MLONGCALLS Enabling this option will probably slow down your kernel. config 64BIT - def_bool "$(ARCH)" = "parisc64" + def_bool y if "$(ARCH)" = "parisc64" + bool "64-bit kernel" if "$(ARCH)" = "parisc" depends on PA8X00 + help + Enable this if you want to support 64bit kernel on PA-RISC platform. + + At the moment, only people willing to use more than 2GB of RAM, + or having a 64bit-only capable PA-RISC machine should say Y here. + + Since there is no 64bit userland on PA-RISC, there is no point to + enable this option otherwise. The 64bit kernel is significantly bigger + and slower than the 32bit one. choice prompt "Kernel page size" diff --git a/arch/parisc/include/asm/io.h b/arch/parisc/include/asm/io.h index 42ffb60a6ea9..c05e781be2f5 100644 --- a/arch/parisc/include/asm/io.h +++ b/arch/parisc/include/asm/io.h @@ -128,98 +128,16 @@ static inline void gsc_writeq(unsigned long long val, unsigned long addr) void __iomem *ioremap(unsigned long offset, unsigned long size); #define ioremap_wc ioremap #define ioremap_uc ioremap +#define pci_iounmap pci_iounmap extern void iounmap(const volatile void __iomem *addr); -static inline unsigned char __raw_readb(const volatile void __iomem *addr) -{ - return (*(volatile unsigned char __force *) (addr)); -} -static inline unsigned short __raw_readw(const volatile void __iomem *addr) -{ - return *(volatile unsigned short __force *) addr; -} -static inline unsigned int __raw_readl(const volatile void __iomem *addr) -{ - return *(volatile unsigned int __force *) addr; -} -static inline unsigned long long __raw_readq(const volatile void __iomem *addr) -{ - return *(volatile unsigned long long __force *) addr; -} - -static inline void __raw_writeb(unsigned char b, volatile void __iomem *addr) -{ - *(volatile unsigned char __force *) addr = b; -} -static inline void __raw_writew(unsigned short b, volatile void __iomem *addr) -{ - *(volatile unsigned short __force *) addr = b; -} -static inline void __raw_writel(unsigned int b, volatile void __iomem *addr) -{ - *(volatile unsigned int __force *) addr = b; -} -static inline void __raw_writeq(unsigned long long b, volatile void __iomem *addr) -{ - *(volatile unsigned long long __force *) addr = b; -} - -static inline unsigned char readb(const volatile void __iomem *addr) -{ - return __raw_readb(addr); -} -static inline unsigned short readw(const volatile void __iomem *addr) -{ - return le16_to_cpu((__le16 __force) __raw_readw(addr)); -} -static inline unsigned int readl(const volatile void __iomem *addr) -{ - return le32_to_cpu((__le32 __force) __raw_readl(addr)); -} -static inline unsigned long long readq(const volatile void __iomem *addr) -{ - return le64_to_cpu((__le64 __force) __raw_readq(addr)); -} - -static inline void writeb(unsigned char b, volatile void __iomem *addr) -{ - __raw_writeb(b, addr); -} -static inline void writew(unsigned short w, volatile void __iomem *addr) -{ - __raw_writew((__u16 __force) cpu_to_le16(w), addr); -} -static inline void writel(unsigned int l, volatile void __iomem *addr) -{ - __raw_writel((__u32 __force) cpu_to_le32(l), addr); -} -static inline void writeq(unsigned long long q, volatile void __iomem *addr) -{ - __raw_writeq((__u64 __force) cpu_to_le64(q), addr); -} - -#define readb readb -#define readw readw -#define readl readl -#define readq readq -#define writeb writeb -#define writew writew -#define writel writel -#define writeq writeq - -#define readb_relaxed(addr) readb(addr) -#define readw_relaxed(addr) readw(addr) -#define readl_relaxed(addr) readl(addr) -#define readq_relaxed(addr) readq(addr) -#define writeb_relaxed(b, addr) writeb(b, addr) -#define writew_relaxed(w, addr) writew(w, addr) -#define writel_relaxed(l, addr) writel(l, addr) -#define writeq_relaxed(q, addr) writeq(q, addr) - void memset_io(volatile void __iomem *addr, unsigned char val, int count); void memcpy_fromio(void *dst, const volatile void __iomem *src, int count); void memcpy_toio(volatile void __iomem *dst, const void *src, int count); +#define memset_io memset_io +#define memcpy_fromio memcpy_fromio +#define memcpy_toio memcpy_toio /* Port-space IO */ @@ -241,10 +159,15 @@ extern void eisa_out32(unsigned int data, unsigned short port); extern unsigned char inb(int addr); extern unsigned short inw(int addr); extern unsigned int inl(int addr); - extern void outb(unsigned char b, int addr); extern void outw(unsigned short b, int addr); extern void outl(unsigned int b, int addr); +#define inb inb +#define inw inw +#define inl inl +#define outb outb +#define outw outw +#define outl outl #elif defined(CONFIG_EISA) #define inb eisa_in8 #define inw eisa_in16 @@ -270,7 +193,9 @@ static inline int inl(unsigned long addr) BUG(); return -1; } - +#define inb inb +#define inw inw +#define inl inl #define outb(x, y) ({(void)(x); (void)(y); BUG(); 0;}) #define outw(x, y) ({(void)(x); (void)(y); BUG(); 0;}) #define outl(x, y) ({(void)(x); (void)(y); BUG(); 0;}) @@ -285,7 +210,12 @@ extern void insl (unsigned long port, void *dst, unsigned long count); extern void outsb (unsigned long port, const void *src, unsigned long count); extern void outsw (unsigned long port, const void *src, unsigned long count); extern void outsl (unsigned long port, const void *src, unsigned long count); - +#define insb insb +#define insw insw +#define insl insl +#define outsb outsb +#define outsw outsw +#define outsl outsl /* IO Port space is : BBiiii where BB is HBA number. */ #define IO_SPACE_LIMIT 0x00ffffff @@ -297,6 +227,7 @@ extern void outsl (unsigned long port, const void *src, unsigned long count); * value for either 32 or 64 bit mode */ #define F_EXTEND(x) ((unsigned long)((x) | (0xffffffff00000000ULL))) +#ifdef CONFIG_64BIT #define ioread64 ioread64 #define ioread64be ioread64be #define iowrite64 iowrite64 @@ -305,8 +236,31 @@ extern u64 ioread64(const void __iomem *addr); extern u64 ioread64be(const void __iomem *addr); extern void iowrite64(u64 val, void __iomem *addr); extern void iowrite64be(u64 val, void __iomem *addr); +#endif #include <asm-generic/iomap.h> +/* + * These get provided from <asm-generic/iomap.h> since parisc does not + * select GENERIC_IOMAP. + */ +#define ioport_map ioport_map +#define ioport_unmap ioport_unmap +#define ioread8 ioread8 +#define ioread16 ioread16 +#define ioread32 ioread32 +#define ioread16be ioread16be +#define ioread32be ioread32be +#define iowrite8 iowrite8 +#define iowrite16 iowrite16 +#define iowrite32 iowrite32 +#define iowrite16be iowrite16be +#define iowrite32be iowrite32be +#define ioread8_rep ioread8_rep +#define ioread16_rep ioread16_rep +#define ioread32_rep ioread32_rep +#define iowrite8_rep iowrite8_rep +#define iowrite16_rep iowrite16_rep +#define iowrite32_rep iowrite32_rep /* * Convert a physical pointer to a virtual kernel pointer for /dev/mem @@ -316,4 +270,6 @@ extern void iowrite64be(u64 val, void __iomem *addr); extern int devmem_is_allowed(unsigned long pfn); +#include <asm-generic/io.h> + #endif diff --git a/arch/parisc/include/asm/termios.h b/arch/parisc/include/asm/termios.h deleted file mode 100644 index cded9dc90c1b..000000000000 --- a/arch/parisc/include/asm/termios.h +++ /dev/null @@ -1,52 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _PARISC_TERMIOS_H -#define _PARISC_TERMIOS_H - -#include <uapi/asm/termios.h> - - -/* intr=^C quit=^\ erase=del kill=^U - eof=^D vtime=\0 vmin=\1 sxtc=\0 - start=^Q stop=^S susp=^Z eol=\0 - reprint=^R discard=^U werase=^W lnext=^V - eol2=\0 -*/ -#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" - -/* - * Translate a "termio" structure into a "termios". Ugh. - */ -#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \ - unsigned short __tmp; \ - get_user(__tmp,&(termio)->x); \ - *(unsigned short *) &(termios)->x = __tmp; \ -} - -#define user_termio_to_kernel_termios(termios, termio) \ -({ \ - SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \ - copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ -}) - -/* - * Translate a "termios" structure into a "termio". Ugh. - */ -#define kernel_termios_to_user_termio(termio, termios) \ -({ \ - put_user((termios)->c_iflag, &(termio)->c_iflag); \ - put_user((termios)->c_oflag, &(termio)->c_oflag); \ - put_user((termios)->c_cflag, &(termio)->c_cflag); \ - put_user((termios)->c_lflag, &(termio)->c_lflag); \ - put_user((termios)->c_line, &(termio)->c_line); \ - copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ -}) - -#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2)) -#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2)) -#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios)) -#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios)) - -#endif /* _PARISC_TERMIOS_H */ diff --git a/arch/parisc/include/uapi/asm/termios.h b/arch/parisc/include/uapi/asm/termios.h deleted file mode 100644 index aba174f23ef0..000000000000 --- a/arch/parisc/include/uapi/asm/termios.h +++ /dev/null @@ -1,44 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef _UAPI_PARISC_TERMIOS_H -#define _UAPI_PARISC_TERMIOS_H - -#include <asm/termbits.h> -#include <asm/ioctls.h> - -struct winsize { - unsigned short ws_row; - unsigned short ws_col; - unsigned short ws_xpixel; - unsigned short ws_ypixel; -}; - -#define NCC 8 -struct termio { - unsigned short c_iflag; /* input mode flags */ - unsigned short c_oflag; /* output mode flags */ - unsigned short c_cflag; /* control mode flags */ - unsigned short c_lflag; /* local mode flags */ - unsigned char c_line; /* line discipline */ - unsigned char c_cc[NCC]; /* control characters */ -}; - -/* modem lines */ -#define TIOCM_LE 0x001 -#define TIOCM_DTR 0x002 -#define TIOCM_RTS 0x004 -#define TIOCM_ST 0x008 -#define TIOCM_SR 0x010 -#define TIOCM_CTS 0x020 -#define TIOCM_CAR 0x040 -#define TIOCM_RNG 0x080 -#define TIOCM_DSR 0x100 -#define TIOCM_CD TIOCM_CAR -#define TIOCM_RI TIOCM_RNG -#define TIOCM_OUT1 0x2000 -#define TIOCM_OUT2 0x4000 -#define TIOCM_LOOP 0x8000 - -/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ - - -#endif /* _UAPI_PARISC_TERMIOS_H */ diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c index fbb882cb8dbb..b05055f3ba4b 100644 --- a/arch/parisc/kernel/irq.c +++ b/arch/parisc/kernel/irq.c @@ -480,7 +480,7 @@ static void execute_on_irq_stack(void *func, unsigned long param1) *irq_stack_in_use = 1; } -#ifndef CONFIG_PREEMPT_RT +#ifdef CONFIG_SOFTIRQ_ON_OWN_STACK void do_softirq_own_stack(void) { execute_on_irq_stack(__do_softirq, 0); diff --git a/arch/parisc/lib/iomap.c b/arch/parisc/lib/iomap.c index 860385058085..915c0c4da663 100644 --- a/arch/parisc/lib/iomap.c +++ b/arch/parisc/lib/iomap.c @@ -48,15 +48,19 @@ struct iomap_ops { unsigned int (*read16be)(const void __iomem *); unsigned int (*read32)(const void __iomem *); unsigned int (*read32be)(const void __iomem *); +#ifdef CONFIG_64BIT u64 (*read64)(const void __iomem *); u64 (*read64be)(const void __iomem *); +#endif void (*write8)(u8, void __iomem *); void (*write16)(u16, void __iomem *); void (*write16be)(u16, void __iomem *); void (*write32)(u32, void __iomem *); void (*write32be)(u32, void __iomem *); +#ifdef CONFIG_64BIT void (*write64)(u64, void __iomem *); void (*write64be)(u64, void __iomem *); +#endif void (*read8r)(const void __iomem *, void *, unsigned long); void (*read16r)(const void __iomem *, void *, unsigned long); void (*read32r)(const void __iomem *, void *, unsigned long); @@ -175,6 +179,7 @@ static unsigned int iomem_read32be(const void __iomem *addr) return __raw_readl(addr); } +#ifdef CONFIG_64BIT static u64 iomem_read64(const void __iomem *addr) { return readq(addr); @@ -184,6 +189,7 @@ static u64 iomem_read64be(const void __iomem *addr) { return __raw_readq(addr); } +#endif static void iomem_write8(u8 datum, void __iomem *addr) { @@ -210,15 +216,17 @@ static void iomem_write32be(u32 datum, void __iomem *addr) __raw_writel(datum, addr); } +#ifdef CONFIG_64BIT static void iomem_write64(u64 datum, void __iomem *addr) { - writel(datum, addr); + writeq(datum, addr); } static void iomem_write64be(u64 datum, void __iomem *addr) { - __raw_writel(datum, addr); + __raw_writeq(datum, addr); } +#endif static void iomem_read8r(const void __iomem *addr, void *dst, unsigned long count) { @@ -274,15 +282,19 @@ static const struct iomap_ops iomem_ops = { .read16be = iomem_read16be, .read32 = iomem_read32, .read32be = iomem_read32be, +#ifdef CONFIG_64BIT .read64 = iomem_read64, .read64be = iomem_read64be, +#endif .write8 = iomem_write8, .write16 = iomem_write16, .write16be = iomem_write16be, .write32 = iomem_write32, .write32be = iomem_write32be, +#ifdef CONFIG_64BIT .write64 = iomem_write64, .write64be = iomem_write64be, +#endif .read8r = iomem_read8r, .read16r = iomem_read16r, .read32r = iomem_read32r, @@ -332,6 +344,7 @@ unsigned int ioread32be(const void __iomem *addr) return *((u32 *)addr); } +#ifdef CONFIG_64BIT u64 ioread64(const void __iomem *addr) { if (unlikely(INDIRECT_ADDR(addr))) @@ -345,26 +358,7 @@ u64 ioread64be(const void __iomem *addr) return iomap_ops[ADDR_TO_REGION(addr)]->read64be(addr); return *((u64 *)addr); } - -u64 ioread64_lo_hi(const void __iomem *addr) -{ - u32 low, high; - - low = ioread32(addr); - high = ioread32(addr + sizeof(u32)); - - return low + ((u64)high << 32); -} - -u64 ioread64_hi_lo(const void __iomem *addr) -{ - u32 low, high; - - high = ioread32(addr + sizeof(u32)); - low = ioread32(addr); - - return low + ((u64)high << 32); -} +#endif void iowrite8(u8 datum, void __iomem *addr) { @@ -411,6 +405,7 @@ void iowrite32be(u32 datum, void __iomem *addr) } } +#ifdef CONFIG_64BIT void iowrite64(u64 datum, void __iomem *addr) { if (unlikely(INDIRECT_ADDR(addr))) { @@ -428,18 +423,7 @@ void iowrite64be(u64 datum, void __iomem *addr) *((u64 *)addr) = datum; } } - -void iowrite64_lo_hi(u64 val, void __iomem *addr) -{ - iowrite32(val, addr); - iowrite32(val >> 32, addr + sizeof(u32)); -} - -void iowrite64_hi_lo(u64 val, void __iomem *addr) -{ - iowrite32(val >> 32, addr + sizeof(u32)); - iowrite32(val, addr); -} +#endif /* Repeating interfaces */ @@ -544,19 +528,19 @@ EXPORT_SYMBOL(ioread16); EXPORT_SYMBOL(ioread16be); EXPORT_SYMBOL(ioread32); EXPORT_SYMBOL(ioread32be); +#ifdef CONFIG_64BIT EXPORT_SYMBOL(ioread64); EXPORT_SYMBOL(ioread64be); -EXPORT_SYMBOL(ioread64_lo_hi); -EXPORT_SYMBOL(ioread64_hi_lo); +#endif EXPORT_SYMBOL(iowrite8); EXPORT_SYMBOL(iowrite16); EXPORT_SYMBOL(iowrite16be); EXPORT_SYMBOL(iowrite32); EXPORT_SYMBOL(iowrite32be); +#ifdef CONFIG_64BIT EXPORT_SYMBOL(iowrite64); EXPORT_SYMBOL(iowrite64be); -EXPORT_SYMBOL(iowrite64_lo_hi); -EXPORT_SYMBOL(iowrite64_hi_lo); +#endif EXPORT_SYMBOL(ioread8_rep); EXPORT_SYMBOL(ioread16_rep); EXPORT_SYMBOL(ioread32_rep); diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig index 91967824272e..a24f484bfbd2 100644 --- a/arch/powerpc/configs/ppc6xx_defconfig +++ b/arch/powerpc/configs/ppc6xx_defconfig @@ -243,8 +243,6 @@ CONFIG_ATM_LANE=m CONFIG_ATM_BR2684=m CONFIG_BRIDGE=m CONFIG_VLAN_8021Q=m -CONFIG_DECNET=m -CONFIG_DECNET_ROUTER=y CONFIG_ATALK=m CONFIG_DEV_APPLETALK=m CONFIG_IPDDP=m diff --git a/arch/powerpc/include/asm/termios.h b/arch/powerpc/include/asm/termios.h deleted file mode 100644 index 205de8f8a9d3..000000000000 --- a/arch/powerpc/include/asm/termios.h +++ /dev/null @@ -1,18 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Liberally adapted from alpha/termios.h. In particular, the c_cc[] - * fields have been reordered so that termio & termios share the - * common subset in the same order (for brain dead programs that don't - * know or care about the differences). - */ -#ifndef _ASM_POWERPC_TERMIOS_H -#define _ASM_POWERPC_TERMIOS_H - -#include <uapi/asm/termios.h> - -/* ^C ^\ del ^U ^D 1 0 0 0 0 ^W ^R ^Z ^Q ^S ^V ^U */ -#define INIT_C_CC "\003\034\177\025\004\001\000\000\000\000\027\022\032\021\023\026\025" - -#include <asm-generic/termios-base.h> - -#endif /* _ASM_POWERPC_TERMIOS_H */ diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 0f17268c1f0b..9ede61a5a469 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -199,7 +199,7 @@ static inline void check_stack_overflow(unsigned long sp) } } -#ifndef CONFIG_PREEMPT_RT +#ifdef CONFIG_SOFTIRQ_ON_OWN_STACK static __always_inline void call_do_softirq(const void *sp) { /* Temporarily switch r1 to sp, call __do_softirq() then restore r1. */ @@ -335,7 +335,7 @@ void *mcheckirq_ctx[NR_CPUS] __read_mostly; void *softirq_ctx[NR_CPUS] __read_mostly; void *hardirq_ctx[NR_CPUS] __read_mostly; -#ifndef CONFIG_PREEMPT_RT +#ifdef CONFIG_SOFTIRQ_ON_OWN_STACK void do_softirq_own_stack(void) { call_do_softirq(softirq_ctx[smp_processor_id()]); diff --git a/arch/powerpc/mm/book3s64/radix_pgtable.c b/arch/powerpc/mm/book3s64/radix_pgtable.c index 698274109c91..e712f80fe189 100644 --- a/arch/powerpc/mm/book3s64/radix_pgtable.c +++ b/arch/powerpc/mm/book3s64/radix_pgtable.c @@ -937,15 +937,6 @@ pmd_t radix__pmdp_collapse_flush(struct vm_area_struct *vma, unsigned long addre pmd = *pmdp; pmd_clear(pmdp); - /* - * pmdp collapse_flush need to ensure that there are no parallel gup - * walk after this call. This is needed so that we can have stable - * page ref count when collapsing a page. We don't allow a collapse page - * if we have gup taken on the page. We can ensure that by sending IPI - * because gup walk happens with IRQ disabled. - */ - serialize_against_pte_lookup(vma->vm_mm); - radix__flush_tlb_collapsed_pmd(vma->vm_mm, address); return pmd; diff --git a/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c b/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c index abb62fa630ef..77ed61306a73 100644 --- a/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c +++ b/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c @@ -178,7 +178,7 @@ err: return ret; } -static int mcu_remove(struct i2c_client *client) +static void mcu_remove(struct i2c_client *client) { struct mcu *mcu = i2c_get_clientdata(client); @@ -193,7 +193,6 @@ static int mcu_remove(struct i2c_client *client) mcu_gpiochip_remove(mcu); kfree(mcu); - return 0; } static const struct i2c_device_id mcu_ids[] = { diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c index 320008528edd..dbcfe361831a 100644 --- a/arch/powerpc/platforms/cell/spufs/inode.c +++ b/arch/powerpc/platforms/cell/spufs/inode.c @@ -275,7 +275,7 @@ spufs_mkdir(struct inode *dir, struct dentry *dentry, unsigned int flags, return ret; } -static int spufs_context_open(struct path *path) +static int spufs_context_open(const struct path *path) { int ret; struct file *filp; @@ -491,7 +491,7 @@ out: return ret; } -static int spufs_gang_open(struct path *path) +static int spufs_gang_open(const struct path *path) { int ret; struct file *filp; @@ -536,7 +536,7 @@ static int spufs_create_gang(struct inode *inode, static struct file_system_type spufs_type; -long spufs_create(struct path *path, struct dentry *dentry, +long spufs_create(const struct path *path, struct dentry *dentry, unsigned int flags, umode_t mode, struct file *filp) { struct inode *dir = d_inode(path->dentry); diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h index 23c6799cfa5a..af048b6dd30a 100644 --- a/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -232,7 +232,7 @@ extern const struct spufs_tree_descr spufs_dir_debug_contents[]; extern struct spufs_calls spufs_calls; struct coredump_params; long spufs_run_spu(struct spu_context *ctx, u32 *npc, u32 *status); -long spufs_create(struct path *nd, struct dentry *dentry, unsigned int flags, +long spufs_create(const struct path *nd, struct dentry *dentry, unsigned int flags, umode_t mode, struct file *filp); /* ELF coredump callbacks for writing SPU ELF notes */ extern int spufs_coredump_extra_notes_size(void); diff --git a/arch/powerpc/platforms/pseries/plpks.c b/arch/powerpc/platforms/pseries/plpks.c index 52aaa2894606..f4b5b5a64db3 100644 --- a/arch/powerpc/platforms/pseries/plpks.c +++ b/arch/powerpc/platforms/pseries/plpks.c @@ -17,6 +17,7 @@ #include <linux/string.h> #include <linux/types.h> #include <asm/hvcall.h> +#include <asm/machdep.h> #include "plpks.h" @@ -457,4 +458,4 @@ static __init int pseries_plpks_init(void) return rc; } -arch_initcall(pseries_plpks_init); +machine_arch_initcall(pseries, pseries_plpks_init); diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig index ed66c31e4655..59d18881f35b 100644 --- a/arch/riscv/Kconfig +++ b/arch/riscv/Kconfig @@ -386,6 +386,7 @@ config RISCV_ISA_C config RISCV_ISA_SVPBMT bool "SVPBMT extension support" depends on 64BIT && MMU + depends on !XIP_KERNEL select RISCV_ALTERNATIVE default y help diff --git a/arch/riscv/Kconfig.erratas b/arch/riscv/Kconfig.erratas index 6850e9389930..f3623df23b5f 100644 --- a/arch/riscv/Kconfig.erratas +++ b/arch/riscv/Kconfig.erratas @@ -46,7 +46,7 @@ config ERRATA_THEAD config ERRATA_THEAD_PBMT bool "Apply T-Head memory type errata" - depends on ERRATA_THEAD && 64BIT + depends on ERRATA_THEAD && 64BIT && MMU select RISCV_ALTERNATIVE_EARLY default y help @@ -57,7 +57,7 @@ config ERRATA_THEAD_PBMT config ERRATA_THEAD_CMO bool "Apply T-Head cache management errata" - depends on ERRATA_THEAD + depends on ERRATA_THEAD && MMU select RISCV_DMA_NONCOHERENT default y help diff --git a/arch/riscv/boot/dts/microchip/mpfs.dtsi b/arch/riscv/boot/dts/microchip/mpfs.dtsi index 74493344ea41..6d9d455fa160 100644 --- a/arch/riscv/boot/dts/microchip/mpfs.dtsi +++ b/arch/riscv/boot/dts/microchip/mpfs.dtsi @@ -185,7 +185,7 @@ ranges; cctrllr: cache-controller@2010000 { - compatible = "sifive,fu540-c000-ccache", "cache"; + compatible = "microchip,mpfs-ccache", "sifive,fu540-c000-ccache", "cache"; reg = <0x0 0x2010000 0x0 0x1000>; cache-block-size = <64>; cache-level = <2>; diff --git a/arch/riscv/errata/thead/errata.c b/arch/riscv/errata/thead/errata.c index 202c83f677b2..96648c176f37 100644 --- a/arch/riscv/errata/thead/errata.c +++ b/arch/riscv/errata/thead/errata.c @@ -37,6 +37,7 @@ static bool errata_probe_cmo(unsigned int stage, if (stage == RISCV_ALTERNATIVES_EARLY_BOOT) return false; + riscv_cbom_block_size = L1_CACHE_BYTES; riscv_noncoherent_supported(); return true; #else diff --git a/arch/riscv/include/asm/cacheflush.h b/arch/riscv/include/asm/cacheflush.h index a60acaecfeda..273ece6b622f 100644 --- a/arch/riscv/include/asm/cacheflush.h +++ b/arch/riscv/include/asm/cacheflush.h @@ -42,6 +42,11 @@ void flush_icache_mm(struct mm_struct *mm, bool local); #endif /* CONFIG_SMP */ +/* + * The T-Head CMO errata internally probe the CBOM block size, but otherwise + * don't depend on Zicbom. + */ +extern unsigned int riscv_cbom_block_size; #ifdef CONFIG_RISCV_ISA_ZICBOM void riscv_init_cbom_blocksize(void); #else diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c index 95ef6e2bf45c..2dfc463b86bb 100644 --- a/arch/riscv/kernel/setup.c +++ b/arch/riscv/kernel/setup.c @@ -296,8 +296,8 @@ void __init setup_arch(char **cmdline_p) setup_smp(); #endif - riscv_fill_hwcap(); riscv_init_cbom_blocksize(); + riscv_fill_hwcap(); apply_boot_alternatives(); } diff --git a/arch/riscv/kernel/signal.c b/arch/riscv/kernel/signal.c index 5a2de6b6f882..5c591123c440 100644 --- a/arch/riscv/kernel/signal.c +++ b/arch/riscv/kernel/signal.c @@ -124,6 +124,8 @@ SYSCALL_DEFINE0(rt_sigreturn) if (restore_altstack(&frame->uc.uc_stack)) goto badframe; + regs->cause = -1UL; + return regs->a0; badframe: diff --git a/arch/riscv/mm/dma-noncoherent.c b/arch/riscv/mm/dma-noncoherent.c index cd2225304c82..e3f9bdf47c5f 100644 --- a/arch/riscv/mm/dma-noncoherent.c +++ b/arch/riscv/mm/dma-noncoherent.c @@ -12,7 +12,7 @@ #include <linux/of_device.h> #include <asm/cacheflush.h> -static unsigned int riscv_cbom_block_size = L1_CACHE_BYTES; +unsigned int riscv_cbom_block_size; static bool noncoherent_supported; void arch_sync_dma_for_device(phys_addr_t paddr, size_t size, @@ -79,38 +79,41 @@ void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size, void riscv_init_cbom_blocksize(void) { struct device_node *node; + unsigned long cbom_hartid; + u32 val, probed_block_size; int ret; - u32 val; + probed_block_size = 0; for_each_of_cpu_node(node) { unsigned long hartid; - int cbom_hartid; ret = riscv_of_processor_hartid(node, &hartid); if (ret) continue; - if (hartid < 0) - continue; - /* set block-size for cbom extension if available */ ret = of_property_read_u32(node, "riscv,cbom-block-size", &val); if (ret) continue; - if (!riscv_cbom_block_size) { - riscv_cbom_block_size = val; + if (!probed_block_size) { + probed_block_size = val; cbom_hartid = hartid; } else { - if (riscv_cbom_block_size != val) - pr_warn("cbom-block-size mismatched between harts %d and %lu\n", + if (probed_block_size != val) + pr_warn("cbom-block-size mismatched between harts %lu and %lu\n", cbom_hartid, hartid); } } + + if (probed_block_size) + riscv_cbom_block_size = probed_block_size; } #endif void riscv_noncoherent_supported(void) { + WARN(!riscv_cbom_block_size, + "Non-coherent DMA support enabled without a block size\n"); noncoherent_supported = true; } diff --git a/arch/s390/include/asm/scsw.h b/arch/s390/include/asm/scsw.h index 7ce584aff5bb..322bdcd4b616 100644 --- a/arch/s390/include/asm/scsw.h +++ b/arch/s390/include/asm/scsw.h @@ -215,6 +215,11 @@ union scsw { #define SNS2_ENV_DATA_PRESENT 0x10 #define SNS2_INPRECISE_END 0x04 +/* + * architectured values for PPRC errors + */ +#define SNS7_INVALID_ON_SEC 0x0e + /** * scsw_is_tm - check for transport mode scsw * @scsw: pointer to scsw diff --git a/arch/s390/include/asm/softirq_stack.h b/arch/s390/include/asm/softirq_stack.h index af68d6c1d584..1ac5115d3115 100644 --- a/arch/s390/include/asm/softirq_stack.h +++ b/arch/s390/include/asm/softirq_stack.h @@ -5,7 +5,7 @@ #include <asm/lowcore.h> #include <asm/stacktrace.h> -#ifndef CONFIG_PREEMPT_RT +#ifdef CONFIG_SOFTIRQ_ON_OWN_STACK static inline void do_softirq_own_stack(void) { call_on_stack(0, S390_lowcore.async_stack, void, __do_softirq); diff --git a/arch/s390/include/asm/termios.h b/arch/s390/include/asm/termios.h deleted file mode 100644 index 46fa3020b41e..000000000000 --- a/arch/s390/include/asm/termios.h +++ /dev/null @@ -1,26 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * S390 version - * - * Derived from "include/asm-i386/termios.h" - */ -#ifndef _S390_TERMIOS_H -#define _S390_TERMIOS_H - -#include <uapi/asm/termios.h> - - -/* intr=^C quit=^\ erase=del kill=^U - eof=^D vtime=\0 vmin=\1 sxtc=\0 - start=^Q stop=^S susp=^Z eol=\0 - reprint=^R discard=^U werase=^W lnext=^V - eol2=\0 -*/ -#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" - -#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2)) -#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2)) - -#include <asm-generic/termios-base.h> - -#endif /* _S390_TERMIOS_H */ diff --git a/arch/s390/include/uapi/asm/dasd.h b/arch/s390/include/uapi/asm/dasd.h index 9ec86fae9980..93d1ccd3304c 100644 --- a/arch/s390/include/uapi/asm/dasd.h +++ b/arch/s390/include/uapi/asm/dasd.h @@ -183,6 +183,18 @@ typedef struct format_data_t { } format_data_t; /* + * struct dasd_copypair_swap_data_t + * represents all data necessary to issue a swap of the copy pair relation + */ +struct dasd_copypair_swap_data_t { + char primary[20]; /* BUSID of primary */ + char secondary[20]; /* BUSID of secondary */ + + /* Reserved for future updates. */ + __u8 reserved[64]; +}; + +/* * values to be used for format_data_t.intensity * 0/8: normal format * 1/9: also write record zero @@ -326,6 +338,8 @@ struct dasd_snid_ioctl_data { #define BIODASDSATTR _IOW(DASD_IOCTL_LETTER,2,attrib_data_t) /* Release Allocated Space */ #define BIODASDRAS _IOW(DASD_IOCTL_LETTER, 3, format_data_t) +/* Swap copy pair relation */ +#define BIODASDCOPYPAIRSWAP _IOW(DASD_IOCTL_LETTER, 4, struct dasd_copypair_swap_data_t) /* Get Sense Path Group ID (SNID) data */ #define BIODASDSNID _IOWR(DASD_IOCTL_LETTER, 1, struct dasd_snid_ioctl_data) diff --git a/arch/s390/include/uapi/asm/termios.h b/arch/s390/include/uapi/asm/termios.h deleted file mode 100644 index 54223169c806..000000000000 --- a/arch/s390/include/uapi/asm/termios.h +++ /dev/null @@ -1,50 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * S390 version - * - * Derived from "include/asm-i386/termios.h" - */ - -#ifndef _UAPI_S390_TERMIOS_H -#define _UAPI_S390_TERMIOS_H - -#include <asm/termbits.h> -#include <asm/ioctls.h> - -struct winsize { - unsigned short ws_row; - unsigned short ws_col; - unsigned short ws_xpixel; - unsigned short ws_ypixel; -}; - -#define NCC 8 -struct termio { - unsigned short c_iflag; /* input mode flags */ - unsigned short c_oflag; /* output mode flags */ - unsigned short c_cflag; /* control mode flags */ - unsigned short c_lflag; /* local mode flags */ - unsigned char c_line; /* line discipline */ - unsigned char c_cc[NCC]; /* control characters */ -}; - -/* modem lines */ -#define TIOCM_LE 0x001 -#define TIOCM_DTR 0x002 -#define TIOCM_RTS 0x004 -#define TIOCM_ST 0x008 -#define TIOCM_SR 0x010 -#define TIOCM_CTS 0x020 -#define TIOCM_CAR 0x040 -#define TIOCM_RNG 0x080 -#define TIOCM_DSR 0x100 -#define TIOCM_CD TIOCM_CAR -#define TIOCM_RI TIOCM_RNG -#define TIOCM_OUT1 0x2000 -#define TIOCM_OUT2 0x4000 -#define TIOCM_LOOP 0x8000 - -/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ - - -#endif /* _UAPI_S390_TERMIOS_H */ diff --git a/arch/s390/kernel/nmi.c b/arch/s390/kernel/nmi.c index 60ac66aab163..31cb9b00a36b 100644 --- a/arch/s390/kernel/nmi.c +++ b/arch/s390/kernel/nmi.c @@ -64,7 +64,7 @@ static inline unsigned long nmi_get_mcesa_size(void) * structure. The structure is required for machine check happening * early in the boot process. */ -static struct mcesa boot_mcesa __initdata __aligned(MCESA_MAX_SIZE); +static struct mcesa boot_mcesa __aligned(MCESA_MAX_SIZE); void __init nmi_alloc_mcesa_early(u64 *mcesad) { diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index ed4fbbbdd1b0..bbd4bde4f65d 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -479,6 +479,7 @@ static void __init setup_lowcore_dat_off(void) put_abs_lowcore(restart_data, lc->restart_data); put_abs_lowcore(restart_source, lc->restart_source); put_abs_lowcore(restart_psw, lc->restart_psw); + put_abs_lowcore(mcesad, lc->mcesad); mcck_stack = (unsigned long)memblock_alloc(THREAD_SIZE, THREAD_SIZE); if (!mcck_stack) @@ -507,8 +508,8 @@ static void __init setup_lowcore_dat_on(void) S390_lowcore.svc_new_psw.mask |= PSW_MASK_DAT; S390_lowcore.program_new_psw.mask |= PSW_MASK_DAT; S390_lowcore.io_new_psw.mask |= PSW_MASK_DAT; - __ctl_store(S390_lowcore.cregs_save_area, 0, 15); __ctl_set_bit(0, 28); + __ctl_store(S390_lowcore.cregs_save_area, 0, 15); put_abs_lowcore(restart_flags, RESTART_FLAG_CTLREGS); put_abs_lowcore(program_new_psw, lc->program_new_psw); for (cr = 0; cr < ARRAY_SIZE(lc->cregs_save_area); cr++) diff --git a/arch/s390/kvm/gaccess.c b/arch/s390/kvm/gaccess.c index 082ec5f2c3a5..0243b6e38d36 100644 --- a/arch/s390/kvm/gaccess.c +++ b/arch/s390/kvm/gaccess.c @@ -489,6 +489,8 @@ enum prot_type { PROT_TYPE_ALC = 2, PROT_TYPE_DAT = 3, PROT_TYPE_IEP = 4, + /* Dummy value for passing an initialized value when code != PGM_PROTECTION */ + PROT_NONE, }; static int trans_exc_ending(struct kvm_vcpu *vcpu, int code, unsigned long gva, u8 ar, @@ -504,6 +506,10 @@ static int trans_exc_ending(struct kvm_vcpu *vcpu, int code, unsigned long gva, switch (code) { case PGM_PROTECTION: switch (prot) { + case PROT_NONE: + /* We should never get here, acts like termination */ + WARN_ON_ONCE(1); + break; case PROT_TYPE_IEP: tec->b61 = 1; fallthrough; @@ -968,8 +974,10 @@ static int guest_range_to_gpas(struct kvm_vcpu *vcpu, unsigned long ga, u8 ar, return rc; } else { gpa = kvm_s390_real_to_abs(vcpu, ga); - if (kvm_is_error_gpa(vcpu->kvm, gpa)) + if (kvm_is_error_gpa(vcpu->kvm, gpa)) { rc = PGM_ADDRESSING; + prot = PROT_NONE; + } } if (rc) return trans_exc(vcpu, rc, ga, ar, mode, prot); @@ -1112,8 +1120,6 @@ int access_guest_with_key(struct kvm_vcpu *vcpu, unsigned long ga, u8 ar, if (rc == PGM_PROTECTION && try_storage_prot_override) rc = access_guest_page_with_key(vcpu->kvm, mode, gpas[idx], data, fragment_len, PAGE_SPO_ACC); - if (rc == PGM_PROTECTION) - prot = PROT_TYPE_KEYC; if (rc) break; len -= fragment_len; @@ -1123,6 +1129,10 @@ int access_guest_with_key(struct kvm_vcpu *vcpu, unsigned long ga, u8 ar, if (rc > 0) { bool terminate = (mode == GACC_STORE) && (idx > 0); + if (rc == PGM_PROTECTION) + prot = PROT_TYPE_KEYC; + else + prot = PROT_NONE; rc = trans_exc_ending(vcpu, rc, ga, ar, mode, prot, terminate); } out_unlock: diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c index b9c944b262c7..ab569faf0df2 100644 --- a/arch/s390/kvm/interrupt.c +++ b/arch/s390/kvm/interrupt.c @@ -3324,7 +3324,7 @@ static void aen_host_forward(unsigned long si) if (gaite->count == 0) return; if (gaite->aisb != 0) - set_bit_inv(gaite->aisbo, (unsigned long *)gaite->aisb); + set_bit_inv(gaite->aisbo, phys_to_virt(gaite->aisb)); kvm = kvm_s390_pci_si_to_kvm(aift, si); if (!kvm) diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c index edfd4bbd0cba..b7ef0b71014d 100644 --- a/arch/s390/kvm/kvm-s390.c +++ b/arch/s390/kvm/kvm-s390.c @@ -505,7 +505,7 @@ int kvm_arch_init(void *opaque) goto out; } - if (kvm_s390_pci_interp_allowed()) { + if (IS_ENABLED(CONFIG_VFIO_PCI_ZDEV_KVM)) { rc = kvm_s390_pci_init(); if (rc) { pr_err("Unable to allocate AIFT for PCI\n"); @@ -527,7 +527,7 @@ out: void kvm_arch_exit(void) { kvm_s390_gib_destroy(); - if (kvm_s390_pci_interp_allowed()) + if (IS_ENABLED(CONFIG_VFIO_PCI_ZDEV_KVM)) kvm_s390_pci_exit(); debug_unregister(kvm_s390_dbf); debug_unregister(kvm_s390_dbf_uv); diff --git a/arch/s390/kvm/pci.c b/arch/s390/kvm/pci.c index bb8c335d17b9..c50c1645c0ae 100644 --- a/arch/s390/kvm/pci.c +++ b/arch/s390/kvm/pci.c @@ -58,7 +58,7 @@ static int zpci_setup_aipb(u8 nisc) if (!zpci_aipb) return -ENOMEM; - aift->sbv = airq_iv_create(ZPCI_NR_DEVICES, AIRQ_IV_ALLOC, 0); + aift->sbv = airq_iv_create(ZPCI_NR_DEVICES, AIRQ_IV_ALLOC, NULL); if (!aift->sbv) { rc = -ENOMEM; goto free_aipb; @@ -71,7 +71,7 @@ static int zpci_setup_aipb(u8 nisc) rc = -ENOMEM; goto free_sbv; } - aift->gait = (struct zpci_gaite *)page_to_phys(page); + aift->gait = (struct zpci_gaite *)page_to_virt(page); zpci_aipb->aipb.faisb = virt_to_phys(aift->sbv->vector); zpci_aipb->aipb.gait = virt_to_phys(aift->gait); @@ -373,7 +373,7 @@ static int kvm_s390_pci_aif_disable(struct zpci_dev *zdev, bool force) gaite->gisc = 0; gaite->aisbo = 0; gaite->gisa = 0; - aift->kzdev[zdev->aisb] = 0; + aift->kzdev[zdev->aisb] = NULL; /* Clear zdev info */ airq_iv_free_bit(aift->sbv, zdev->aisb); airq_iv_release(zdev->aibv); @@ -672,23 +672,31 @@ out: int kvm_s390_pci_init(void) { + zpci_kvm_hook.kvm_register = kvm_s390_pci_register_kvm; + zpci_kvm_hook.kvm_unregister = kvm_s390_pci_unregister_kvm; + + if (!kvm_s390_pci_interp_allowed()) + return 0; + aift = kzalloc(sizeof(struct zpci_aift), GFP_KERNEL); if (!aift) return -ENOMEM; spin_lock_init(&aift->gait_lock); mutex_init(&aift->aift_lock); - zpci_kvm_hook.kvm_register = kvm_s390_pci_register_kvm; - zpci_kvm_hook.kvm_unregister = kvm_s390_pci_unregister_kvm; return 0; } void kvm_s390_pci_exit(void) { - mutex_destroy(&aift->aift_lock); zpci_kvm_hook.kvm_register = NULL; zpci_kvm_hook.kvm_unregister = NULL; + if (!kvm_s390_pci_interp_allowed()) + return; + + mutex_destroy(&aift->aift_lock); + kfree(aift); } diff --git a/arch/s390/kvm/pci.h b/arch/s390/kvm/pci.h index 3a3606c3a0fe..486d06ef563f 100644 --- a/arch/s390/kvm/pci.h +++ b/arch/s390/kvm/pci.h @@ -46,9 +46,9 @@ extern struct zpci_aift *aift; static inline struct kvm *kvm_s390_pci_si_to_kvm(struct zpci_aift *aift, unsigned long si) { - if (!IS_ENABLED(CONFIG_VFIO_PCI_ZDEV_KVM) || aift->kzdev == 0 || - aift->kzdev[si] == 0) - return 0; + if (!IS_ENABLED(CONFIG_VFIO_PCI_ZDEV_KVM) || !aift->kzdev || + !aift->kzdev[si]) + return NULL; return aift->kzdev[si]->kvm; }; diff --git a/arch/sh/include/asm/sections.h b/arch/sh/include/asm/sections.h index 8edb824049b9..0cb0ca149ac3 100644 --- a/arch/sh/include/asm/sections.h +++ b/arch/sh/include/asm/sections.h @@ -4,7 +4,7 @@ #include <asm-generic/sections.h> -extern long __machvec_start, __machvec_end; +extern char __machvec_start[], __machvec_end[]; extern char __uncached_start, __uncached_end; extern char __start_eh_frame[], __stop_eh_frame[]; diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c index 909276738078..4e6835de54cf 100644 --- a/arch/sh/kernel/irq.c +++ b/arch/sh/kernel/irq.c @@ -149,7 +149,7 @@ void irq_ctx_exit(int cpu) hardirq_ctx[cpu] = NULL; } -#ifndef CONFIG_PREEMPT_RT +#ifdef CONFIG_SOFTIRQ_ON_OWN_STACK void do_softirq_own_stack(void) { struct thread_info *curctx; diff --git a/arch/sh/kernel/machvec.c b/arch/sh/kernel/machvec.c index d606679a211e..57efaf5b82ae 100644 --- a/arch/sh/kernel/machvec.c +++ b/arch/sh/kernel/machvec.c @@ -20,8 +20,8 @@ #define MV_NAME_SIZE 32 #define for_each_mv(mv) \ - for ((mv) = (struct sh_machine_vector *)&__machvec_start; \ - (mv) && (unsigned long)(mv) < (unsigned long)&__machvec_end; \ + for ((mv) = (struct sh_machine_vector *)__machvec_start; \ + (mv) && (unsigned long)(mv) < (unsigned long)__machvec_end; \ (mv)++) static struct sh_machine_vector * __init get_mv_byname(const char *name) @@ -87,8 +87,8 @@ void __init sh_mv_setup(void) if (!machvec_selected) { unsigned long machvec_size; - machvec_size = ((unsigned long)&__machvec_end - - (unsigned long)&__machvec_start); + machvec_size = ((unsigned long)__machvec_end - + (unsigned long)__machvec_start); /* * Sanity check for machvec section alignment. Ensure @@ -102,7 +102,7 @@ void __init sh_mv_setup(void) * vector (usually the only one) from .machvec.init. */ if (machvec_size >= sizeof(struct sh_machine_vector)) - sh_mv = *(struct sh_machine_vector *)&__machvec_start; + sh_mv = *(struct sh_machine_vector *)__machvec_start; } pr_notice("Booting machvec: %s\n", get_system_type()); diff --git a/arch/sparc/include/asm/io.h b/arch/sparc/include/asm/io.h index 2eefa526b38f..2dad9be9ec75 100644 --- a/arch/sparc/include/asm/io.h +++ b/arch/sparc/include/asm/io.h @@ -19,4 +19,6 @@ #define writel_be(__w, __addr) __raw_writel(__w, __addr) #define writew_be(__l, __addr) __raw_writew(__l, __addr) +#include <asm-generic/io.h> + #endif diff --git a/arch/sparc/include/asm/io_64.h b/arch/sparc/include/asm/io_64.h index 5ffa820dcd4d..9303270b22f3 100644 --- a/arch/sparc/include/asm/io_64.h +++ b/arch/sparc/include/asm/io_64.h @@ -9,6 +9,7 @@ #include <asm/page.h> /* IO address mapping routines need this */ #include <asm/asi.h> #include <asm-generic/pci_iomap.h> +#define pci_iomap pci_iomap /* BIO layer definitions. */ extern unsigned long kern_base, kern_size; @@ -239,38 +240,51 @@ static inline void outl(u32 l, unsigned long addr) void outsb(unsigned long, const void *, unsigned long); void outsw(unsigned long, const void *, unsigned long); void outsl(unsigned long, const void *, unsigned long); +#define outsb outsb +#define outsw outsw +#define outsl outsl void insb(unsigned long, void *, unsigned long); void insw(unsigned long, void *, unsigned long); void insl(unsigned long, void *, unsigned long); +#define insb insb +#define insw insw +#define insl insl static inline void readsb(void __iomem *port, void *buf, unsigned long count) { insb((unsigned long __force)port, buf, count); } +#define readsb readsb + static inline void readsw(void __iomem *port, void *buf, unsigned long count) { insw((unsigned long __force)port, buf, count); } +#define readsw readsw static inline void readsl(void __iomem *port, void *buf, unsigned long count) { insl((unsigned long __force)port, buf, count); } +#define readsl readsl static inline void writesb(void __iomem *port, const void *buf, unsigned long count) { outsb((unsigned long __force)port, buf, count); } +#define writesb writesb static inline void writesw(void __iomem *port, const void *buf, unsigned long count) { outsw((unsigned long __force)port, buf, count); } +#define writesw writesw static inline void writesl(void __iomem *port, const void *buf, unsigned long count) { outsl((unsigned long __force)port, buf, count); } +#define writesl writesl #define ioread8_rep(p,d,l) readsb(p,d,l) #define ioread16_rep(p,d,l) readsw(p,d,l) @@ -344,6 +358,7 @@ static inline void memset_io(volatile void __iomem *dst, int c, __kernel_size_t d++; } } +#define memset_io memset_io static inline void sbus_memcpy_fromio(void *dst, const volatile void __iomem *src, __kernel_size_t n) @@ -369,6 +384,7 @@ static inline void memcpy_fromio(void *dst, const volatile void __iomem *src, src++; } } +#define memcpy_fromio memcpy_fromio static inline void sbus_memcpy_toio(volatile void __iomem *dst, const void *src, __kernel_size_t n) @@ -395,6 +411,7 @@ static inline void memcpy_toio(volatile void __iomem *dst, const void *src, d++; } } +#define memcpy_toio memcpy_toio #ifdef __KERNEL__ @@ -412,7 +429,9 @@ static inline void __iomem *ioremap(unsigned long offset, unsigned long size) static inline void __iomem *ioremap_np(unsigned long offset, unsigned long size) { return NULL; + } +#define ioremap_np ioremap_np static inline void iounmap(volatile void __iomem *addr) { @@ -432,10 +451,13 @@ static inline void iounmap(volatile void __iomem *addr) /* Create a virtual mapping cookie for an IO port range */ void __iomem *ioport_map(unsigned long port, unsigned int nr); void ioport_unmap(void __iomem *); +#define ioport_map ioport_map +#define ioport_unmap ioport_unmap /* Create a virtual mapping cookie for a PCI BAR (memory or IO) */ struct pci_dev; void pci_iounmap(struct pci_dev *dev, void __iomem *); +#define pci_iounmap pci_iounmap static inline int sbus_can_dma_64bit(void) { diff --git a/arch/sparc/include/asm/smp_32.h b/arch/sparc/include/asm/smp_32.h index 856081761b0f..2cf7971d7f6c 100644 --- a/arch/sparc/include/asm/smp_32.h +++ b/arch/sparc/include/asm/smp_32.h @@ -33,9 +33,6 @@ extern volatile unsigned long cpu_callin_map[NR_CPUS]; extern cpumask_t smp_commenced_mask; extern struct linux_prom_registers smp_penguin_ctable; -typedef void (*smpfunc_t)(unsigned long, unsigned long, unsigned long, - unsigned long, unsigned long); - void cpu_panic(void); /* @@ -57,7 +54,7 @@ void smp_bogo(struct seq_file *); void smp_info(struct seq_file *); struct sparc32_ipi_ops { - void (*cross_call)(smpfunc_t func, cpumask_t mask, unsigned long arg1, + void (*cross_call)(void *func, cpumask_t mask, unsigned long arg1, unsigned long arg2, unsigned long arg3, unsigned long arg4); void (*resched)(int cpu); @@ -66,28 +63,28 @@ struct sparc32_ipi_ops { }; extern const struct sparc32_ipi_ops *sparc32_ipi_ops; -static inline void xc0(smpfunc_t func) +static inline void xc0(void *func) { sparc32_ipi_ops->cross_call(func, *cpu_online_mask, 0, 0, 0, 0); } -static inline void xc1(smpfunc_t func, unsigned long arg1) +static inline void xc1(void *func, unsigned long arg1) { sparc32_ipi_ops->cross_call(func, *cpu_online_mask, arg1, 0, 0, 0); } -static inline void xc2(smpfunc_t func, unsigned long arg1, unsigned long arg2) +static inline void xc2(void *func, unsigned long arg1, unsigned long arg2) { sparc32_ipi_ops->cross_call(func, *cpu_online_mask, arg1, arg2, 0, 0); } -static inline void xc3(smpfunc_t func, unsigned long arg1, unsigned long arg2, +static inline void xc3(void *func, unsigned long arg1, unsigned long arg2, unsigned long arg3) { sparc32_ipi_ops->cross_call(func, *cpu_online_mask, arg1, arg2, arg3, 0); } -static inline void xc4(smpfunc_t func, unsigned long arg1, unsigned long arg2, +static inline void xc4(void *func, unsigned long arg1, unsigned long arg2, unsigned long arg3, unsigned long arg4) { sparc32_ipi_ops->cross_call(func, *cpu_online_mask, diff --git a/arch/sparc/include/asm/termios.h b/arch/sparc/include/asm/termios.h deleted file mode 100644 index 4a558efdfa93..000000000000 --- a/arch/sparc/include/asm/termios.h +++ /dev/null @@ -1,147 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _SPARC_TERMIOS_H -#define _SPARC_TERMIOS_H - -#include <uapi/asm/termios.h> - - -/* - * c_cc characters in the termio structure. Oh, how I love being - * backwardly compatible. Notice that character 4 and 5 are - * interpreted differently depending on whether ICANON is set in - * c_lflag. If it's set, they are used as _VEOF and _VEOL, otherwise - * as _VMIN and V_TIME. This is for compatibility with OSF/1 (which - * is compatible with sysV)... - */ -#define _VMIN 4 -#define _VTIME 5 - -/* intr=^C quit=^\ erase=del kill=^U - eof=^D eol=\0 eol2=\0 sxtc=\0 - start=^Q stop=^S susp=^Z dsusp=^Y - reprint=^R discard=^U werase=^W lnext=^V - vmin=\1 vtime=\0 -*/ -#define INIT_C_CC "\003\034\177\025\004\000\000\000\021\023\032\031\022\025\027\026\001" - -/* - * Translate a "termio" structure into a "termios". Ugh. - */ -#define user_termio_to_kernel_termios(termios, termio) \ -({ \ - unsigned short tmp; \ - int err; \ - err = get_user(tmp, &(termio)->c_iflag); \ - (termios)->c_iflag = (0xffff0000 & ((termios)->c_iflag)) | tmp; \ - err |= get_user(tmp, &(termio)->c_oflag); \ - (termios)->c_oflag = (0xffff0000 & ((termios)->c_oflag)) | tmp; \ - err |= get_user(tmp, &(termio)->c_cflag); \ - (termios)->c_cflag = (0xffff0000 & ((termios)->c_cflag)) | tmp; \ - err |= get_user(tmp, &(termio)->c_lflag); \ - (termios)->c_lflag = (0xffff0000 & ((termios)->c_lflag)) | tmp; \ - err |= copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ - err; \ -}) - -/* - * Translate a "termios" structure into a "termio". Ugh. - * - * Note the "fun" _VMIN overloading. - */ -#define kernel_termios_to_user_termio(termio, termios) \ -({ \ - int err; \ - err = put_user((termios)->c_iflag, &(termio)->c_iflag); \ - err |= put_user((termios)->c_oflag, &(termio)->c_oflag); \ - err |= put_user((termios)->c_cflag, &(termio)->c_cflag); \ - err |= put_user((termios)->c_lflag, &(termio)->c_lflag); \ - err |= put_user((termios)->c_line, &(termio)->c_line); \ - err |= copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ - if (!((termios)->c_lflag & ICANON)) { \ - err |= put_user((termios)->c_cc[VMIN], &(termio)->c_cc[_VMIN]); \ - err |= put_user((termios)->c_cc[VTIME], &(termio)->c_cc[_VTIME]); \ - } \ - err; \ -}) - -#define user_termios_to_kernel_termios(k, u) \ -({ \ - int err; \ - err = get_user((k)->c_iflag, &(u)->c_iflag); \ - err |= get_user((k)->c_oflag, &(u)->c_oflag); \ - err |= get_user((k)->c_cflag, &(u)->c_cflag); \ - err |= get_user((k)->c_lflag, &(u)->c_lflag); \ - err |= get_user((k)->c_line, &(u)->c_line); \ - err |= copy_from_user((k)->c_cc, (u)->c_cc, NCCS); \ - if ((k)->c_lflag & ICANON) { \ - err |= get_user((k)->c_cc[VEOF], &(u)->c_cc[VEOF]); \ - err |= get_user((k)->c_cc[VEOL], &(u)->c_cc[VEOL]); \ - } else { \ - err |= get_user((k)->c_cc[VMIN], &(u)->c_cc[_VMIN]); \ - err |= get_user((k)->c_cc[VTIME], &(u)->c_cc[_VTIME]); \ - } \ - err |= get_user((k)->c_ispeed, &(u)->c_ispeed); \ - err |= get_user((k)->c_ospeed, &(u)->c_ospeed); \ - err; \ -}) - -#define kernel_termios_to_user_termios(u, k) \ -({ \ - int err; \ - err = put_user((k)->c_iflag, &(u)->c_iflag); \ - err |= put_user((k)->c_oflag, &(u)->c_oflag); \ - err |= put_user((k)->c_cflag, &(u)->c_cflag); \ - err |= put_user((k)->c_lflag, &(u)->c_lflag); \ - err |= put_user((k)->c_line, &(u)->c_line); \ - err |= copy_to_user((u)->c_cc, (k)->c_cc, NCCS); \ - if (!((k)->c_lflag & ICANON)) { \ - err |= put_user((k)->c_cc[VMIN], &(u)->c_cc[_VMIN]); \ - err |= put_user((k)->c_cc[VTIME], &(u)->c_cc[_VTIME]); \ - } else { \ - err |= put_user((k)->c_cc[VEOF], &(u)->c_cc[VEOF]); \ - err |= put_user((k)->c_cc[VEOL], &(u)->c_cc[VEOL]); \ - } \ - err |= put_user((k)->c_ispeed, &(u)->c_ispeed); \ - err |= put_user((k)->c_ospeed, &(u)->c_ospeed); \ - err; \ -}) - -#define user_termios_to_kernel_termios_1(k, u) \ -({ \ - int err; \ - err = get_user((k)->c_iflag, &(u)->c_iflag); \ - err |= get_user((k)->c_oflag, &(u)->c_oflag); \ - err |= get_user((k)->c_cflag, &(u)->c_cflag); \ - err |= get_user((k)->c_lflag, &(u)->c_lflag); \ - err |= get_user((k)->c_line, &(u)->c_line); \ - err |= copy_from_user((k)->c_cc, (u)->c_cc, NCCS); \ - if ((k)->c_lflag & ICANON) { \ - err |= get_user((k)->c_cc[VEOF], &(u)->c_cc[VEOF]); \ - err |= get_user((k)->c_cc[VEOL], &(u)->c_cc[VEOL]); \ - } else { \ - err |= get_user((k)->c_cc[VMIN], &(u)->c_cc[_VMIN]); \ - err |= get_user((k)->c_cc[VTIME], &(u)->c_cc[_VTIME]); \ - } \ - err; \ -}) - -#define kernel_termios_to_user_termios_1(u, k) \ -({ \ - int err; \ - err = put_user((k)->c_iflag, &(u)->c_iflag); \ - err |= put_user((k)->c_oflag, &(u)->c_oflag); \ - err |= put_user((k)->c_cflag, &(u)->c_cflag); \ - err |= put_user((k)->c_lflag, &(u)->c_lflag); \ - err |= put_user((k)->c_line, &(u)->c_line); \ - err |= copy_to_user((u)->c_cc, (k)->c_cc, NCCS); \ - if (!((k)->c_lflag & ICANON)) { \ - err |= put_user((k)->c_cc[VMIN], &(u)->c_cc[_VMIN]); \ - err |= put_user((k)->c_cc[VTIME], &(u)->c_cc[_VTIME]); \ - } else { \ - err |= put_user((k)->c_cc[VEOF], &(u)->c_cc[VEOF]); \ - err |= put_user((k)->c_cc[VEOL], &(u)->c_cc[VEOL]); \ - } \ - err; \ -}) - -#endif /* _SPARC_TERMIOS_H */ diff --git a/arch/sparc/kernel/Makefile b/arch/sparc/kernel/Makefile index d3a0e072ebe8..620c0c5b749b 100644 --- a/arch/sparc/kernel/Makefile +++ b/arch/sparc/kernel/Makefile @@ -87,12 +87,13 @@ obj-$(CONFIG_SPARC64_SMP) += hvtramp.o obj-y += auxio_$(BITS).o obj-$(CONFIG_SUN_PM) += apc.o pmc.o +obj-y += termios.o + obj-$(CONFIG_MODULES) += module.o obj-$(CONFIG_MODULES) += sparc_ksyms.o obj-$(CONFIG_SPARC_LED) += led.o obj-$(CONFIG_KGDB) += kgdb_$(BITS).o - obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o @@ -104,6 +105,7 @@ obj-$(CONFIG_SPARC64_PCI) += pci_psycho.o pci_sabre.o pci_schizo.o obj-$(CONFIG_SPARC64_PCI) += pci_sun4v.o pci_sun4v_asm.o pci_fire.o obj-$(CONFIG_SPARC64_PCI_MSI) += pci_msi.o + obj-$(CONFIG_COMPAT) += sys32.o sys_sparc32.o signal32.o obj-$(CONFIG_US3_MC) += chmc.o diff --git a/arch/sparc/kernel/irq_64.c b/arch/sparc/kernel/irq_64.c index 41fa1be980a3..72da2e10e255 100644 --- a/arch/sparc/kernel/irq_64.c +++ b/arch/sparc/kernel/irq_64.c @@ -855,7 +855,7 @@ void __irq_entry handler_irq(int pil, struct pt_regs *regs) set_irq_regs(old_regs); } -#ifndef CONFIG_PREEMPT_RT +#ifdef CONFIG_SOFTIRQ_ON_OWN_STACK void do_softirq_own_stack(void) { void *orig_sp, *sp = softirq_stack[smp_processor_id()]; diff --git a/arch/sparc/kernel/leon_smp.c b/arch/sparc/kernel/leon_smp.c index 1eed26d423fb..991e9ad3d3e8 100644 --- a/arch/sparc/kernel/leon_smp.c +++ b/arch/sparc/kernel/leon_smp.c @@ -359,7 +359,7 @@ void leonsmp_ipi_interrupt(void) } static struct smp_funcall { - smpfunc_t func; + void *func; unsigned long arg1; unsigned long arg2; unsigned long arg3; @@ -372,7 +372,7 @@ static struct smp_funcall { static DEFINE_SPINLOCK(cross_call_lock); /* Cross calls must be serialized, at least currently. */ -static void leon_cross_call(smpfunc_t func, cpumask_t mask, unsigned long arg1, +static void leon_cross_call(void *func, cpumask_t mask, unsigned long arg1, unsigned long arg2, unsigned long arg3, unsigned long arg4) { @@ -384,7 +384,7 @@ static void leon_cross_call(smpfunc_t func, cpumask_t mask, unsigned long arg1, { /* If you make changes here, make sure gcc generates proper code... */ - register smpfunc_t f asm("i0") = func; + register void *f asm("i0") = func; register unsigned long a1 asm("i1") = arg1; register unsigned long a2 asm("i2") = arg2; register unsigned long a3 asm("i3") = arg3; @@ -444,11 +444,13 @@ static void leon_cross_call(smpfunc_t func, cpumask_t mask, unsigned long arg1, /* Running cross calls. */ void leon_cross_call_irq(void) { + void (*func)(unsigned long, unsigned long, unsigned long, unsigned long, + unsigned long) = ccall_info.func; int i = smp_processor_id(); ccall_info.processors_in[i] = 1; - ccall_info.func(ccall_info.arg1, ccall_info.arg2, ccall_info.arg3, - ccall_info.arg4, ccall_info.arg5); + func(ccall_info.arg1, ccall_info.arg2, ccall_info.arg3, ccall_info.arg4, + ccall_info.arg5); ccall_info.processors_out[i] = 1; } diff --git a/arch/sparc/kernel/sun4d_smp.c b/arch/sparc/kernel/sun4d_smp.c index ff30f03beb7c..9a62a5cf3337 100644 --- a/arch/sparc/kernel/sun4d_smp.c +++ b/arch/sparc/kernel/sun4d_smp.c @@ -268,7 +268,7 @@ static void sun4d_ipi_resched(int cpu) } static struct smp_funcall { - smpfunc_t func; + void *func; unsigned long arg1; unsigned long arg2; unsigned long arg3; @@ -281,7 +281,7 @@ static struct smp_funcall { static DEFINE_SPINLOCK(cross_call_lock); /* Cross calls must be serialized, at least currently. */ -static void sun4d_cross_call(smpfunc_t func, cpumask_t mask, unsigned long arg1, +static void sun4d_cross_call(void *func, cpumask_t mask, unsigned long arg1, unsigned long arg2, unsigned long arg3, unsigned long arg4) { @@ -296,7 +296,7 @@ static void sun4d_cross_call(smpfunc_t func, cpumask_t mask, unsigned long arg1, * If you make changes here, make sure * gcc generates proper code... */ - register smpfunc_t f asm("i0") = func; + register void *f asm("i0") = func; register unsigned long a1 asm("i1") = arg1; register unsigned long a2 asm("i2") = arg2; register unsigned long a3 asm("i3") = arg3; @@ -353,11 +353,13 @@ static void sun4d_cross_call(smpfunc_t func, cpumask_t mask, unsigned long arg1, /* Running cross calls. */ void smp4d_cross_call_irq(void) { + void (*func)(unsigned long, unsigned long, unsigned long, unsigned long, + unsigned long) = ccall_info.func; int i = hard_smp_processor_id(); ccall_info.processors_in[i] = 1; - ccall_info.func(ccall_info.arg1, ccall_info.arg2, ccall_info.arg3, - ccall_info.arg4, ccall_info.arg5); + func(ccall_info.arg1, ccall_info.arg2, ccall_info.arg3, ccall_info.arg4, + ccall_info.arg5); ccall_info.processors_out[i] = 1; } diff --git a/arch/sparc/kernel/sun4m_smp.c b/arch/sparc/kernel/sun4m_smp.c index 228a6527082d..056df034e79e 100644 --- a/arch/sparc/kernel/sun4m_smp.c +++ b/arch/sparc/kernel/sun4m_smp.c @@ -157,7 +157,7 @@ static void sun4m_ipi_mask_one(int cpu) } static struct smp_funcall { - smpfunc_t func; + void *func; unsigned long arg1; unsigned long arg2; unsigned long arg3; @@ -170,7 +170,7 @@ static struct smp_funcall { static DEFINE_SPINLOCK(cross_call_lock); /* Cross calls must be serialized, at least currently. */ -static void sun4m_cross_call(smpfunc_t func, cpumask_t mask, unsigned long arg1, +static void sun4m_cross_call(void *func, cpumask_t mask, unsigned long arg1, unsigned long arg2, unsigned long arg3, unsigned long arg4) { @@ -230,11 +230,13 @@ static void sun4m_cross_call(smpfunc_t func, cpumask_t mask, unsigned long arg1, /* Running cross calls. */ void smp4m_cross_call_irq(void) { + void (*func)(unsigned long, unsigned long, unsigned long, unsigned long, + unsigned long) = ccall_info.func; int i = smp_processor_id(); ccall_info.processors_in[i] = 1; - ccall_info.func(ccall_info.arg1, ccall_info.arg2, ccall_info.arg3, - ccall_info.arg4, ccall_info.arg5); + func(ccall_info.arg1, ccall_info.arg2, ccall_info.arg3, ccall_info.arg4, + ccall_info.arg5); ccall_info.processors_out[i] = 1; } diff --git a/arch/sparc/kernel/termios.c b/arch/sparc/kernel/termios.c new file mode 100644 index 000000000000..ee64965c27cd --- /dev/null +++ b/arch/sparc/kernel/termios.c @@ -0,0 +1,115 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <linux/termios_internal.h> + +/* + * c_cc characters in the termio structure. Oh, how I love being + * backwardly compatible. Notice that character 4 and 5 are + * interpreted differently depending on whether ICANON is set in + * c_lflag. If it's set, they are used as _VEOF and _VEOL, otherwise + * as _VMIN and V_TIME. This is for compatibility with OSF/1 (which + * is compatible with sysV)... + */ +#define _VMIN 4 +#define _VTIME 5 + +int kernel_termios_to_user_termio(struct termio __user *termio, + struct ktermios *termios) +{ + struct termio v; + memset(&v, 0, sizeof(struct termio)); + v.c_iflag = termios->c_iflag; + v.c_oflag = termios->c_oflag; + v.c_cflag = termios->c_cflag; + v.c_lflag = termios->c_lflag; + v.c_line = termios->c_line; + memcpy(v.c_cc, termios->c_cc, NCC); + if (!(v.c_lflag & ICANON)) { + v.c_cc[_VMIN] = termios->c_cc[VMIN]; + v.c_cc[_VTIME] = termios->c_cc[VTIME]; + } + return copy_to_user(termio, &v, sizeof(struct termio)); +} + +int user_termios_to_kernel_termios(struct ktermios *k, + struct termios2 __user *u) +{ + int err; + err = get_user(k->c_iflag, &u->c_iflag); + err |= get_user(k->c_oflag, &u->c_oflag); + err |= get_user(k->c_cflag, &u->c_cflag); + err |= get_user(k->c_lflag, &u->c_lflag); + err |= get_user(k->c_line, &u->c_line); + err |= copy_from_user(k->c_cc, u->c_cc, NCCS); + if (k->c_lflag & ICANON) { + err |= get_user(k->c_cc[VEOF], &u->c_cc[VEOF]); + err |= get_user(k->c_cc[VEOL], &u->c_cc[VEOL]); + } else { + err |= get_user(k->c_cc[VMIN], &u->c_cc[_VMIN]); + err |= get_user(k->c_cc[VTIME], &u->c_cc[_VTIME]); + } + err |= get_user(k->c_ispeed, &u->c_ispeed); + err |= get_user(k->c_ospeed, &u->c_ospeed); + return err; +} + +int kernel_termios_to_user_termios(struct termios2 __user *u, + struct ktermios *k) +{ + int err; + err = put_user(k->c_iflag, &u->c_iflag); + err |= put_user(k->c_oflag, &u->c_oflag); + err |= put_user(k->c_cflag, &u->c_cflag); + err |= put_user(k->c_lflag, &u->c_lflag); + err |= put_user(k->c_line, &u->c_line); + err |= copy_to_user(u->c_cc, k->c_cc, NCCS); + if (!(k->c_lflag & ICANON)) { + err |= put_user(k->c_cc[VMIN], &u->c_cc[_VMIN]); + err |= put_user(k->c_cc[VTIME], &u->c_cc[_VTIME]); + } else { + err |= put_user(k->c_cc[VEOF], &u->c_cc[VEOF]); + err |= put_user(k->c_cc[VEOL], &u->c_cc[VEOL]); + } + err |= put_user(k->c_ispeed, &u->c_ispeed); + err |= put_user(k->c_ospeed, &u->c_ospeed); + return err; +} + +int user_termios_to_kernel_termios_1(struct ktermios *k, + struct termios __user *u) +{ + int err; + err = get_user(k->c_iflag, &u->c_iflag); + err |= get_user(k->c_oflag, &u->c_oflag); + err |= get_user(k->c_cflag, &u->c_cflag); + err |= get_user(k->c_lflag, &u->c_lflag); + err |= get_user(k->c_line, &u->c_line); + err |= copy_from_user(k->c_cc, u->c_cc, NCCS); + if (k->c_lflag & ICANON) { + err |= get_user(k->c_cc[VEOF], &u->c_cc[VEOF]); + err |= get_user(k->c_cc[VEOL], &u->c_cc[VEOL]); + } else { + err |= get_user(k->c_cc[VMIN], &u->c_cc[_VMIN]); + err |= get_user(k->c_cc[VTIME], &u->c_cc[_VTIME]); + } + return err; +} + +int kernel_termios_to_user_termios_1(struct termios __user *u, + struct ktermios *k) +{ + int err; + err = put_user(k->c_iflag, &u->c_iflag); + err |= put_user(k->c_oflag, &u->c_oflag); + err |= put_user(k->c_cflag, &u->c_cflag); + err |= put_user(k->c_lflag, &u->c_lflag); + err |= put_user(k->c_line, &u->c_line); + err |= copy_to_user(u->c_cc, k->c_cc, NCCS); + if (!(k->c_lflag & ICANON)) { + err |= put_user(k->c_cc[VMIN], &u->c_cc[_VMIN]); + err |= put_user(k->c_cc[VTIME], &u->c_cc[_VTIME]); + } else { + err |= put_user(k->c_cc[VEOF], &u->c_cc[VEOF]); + err |= put_user(k->c_cc[VEOL], &u->c_cc[VEOL]); + } + return err; +} diff --git a/arch/sparc/mm/srmmu.c b/arch/sparc/mm/srmmu.c index a9aa6a92c7fe..13f027afc875 100644 --- a/arch/sparc/mm/srmmu.c +++ b/arch/sparc/mm/srmmu.c @@ -1636,19 +1636,19 @@ static void __init get_srmmu_type(void) /* Local cross-calls. */ static void smp_flush_page_for_dma(unsigned long page) { - xc1((smpfunc_t) local_ops->page_for_dma, page); + xc1(local_ops->page_for_dma, page); local_ops->page_for_dma(page); } static void smp_flush_cache_all(void) { - xc0((smpfunc_t) local_ops->cache_all); + xc0(local_ops->cache_all); local_ops->cache_all(); } static void smp_flush_tlb_all(void) { - xc0((smpfunc_t) local_ops->tlb_all); + xc0(local_ops->tlb_all); local_ops->tlb_all(); } @@ -1659,7 +1659,7 @@ static void smp_flush_cache_mm(struct mm_struct *mm) cpumask_copy(&cpu_mask, mm_cpumask(mm)); cpumask_clear_cpu(smp_processor_id(), &cpu_mask); if (!cpumask_empty(&cpu_mask)) - xc1((smpfunc_t) local_ops->cache_mm, (unsigned long) mm); + xc1(local_ops->cache_mm, (unsigned long)mm); local_ops->cache_mm(mm); } } @@ -1671,7 +1671,7 @@ static void smp_flush_tlb_mm(struct mm_struct *mm) cpumask_copy(&cpu_mask, mm_cpumask(mm)); cpumask_clear_cpu(smp_processor_id(), &cpu_mask); if (!cpumask_empty(&cpu_mask)) { - xc1((smpfunc_t) local_ops->tlb_mm, (unsigned long) mm); + xc1(local_ops->tlb_mm, (unsigned long)mm); if (atomic_read(&mm->mm_users) == 1 && current->active_mm == mm) cpumask_copy(mm_cpumask(mm), cpumask_of(smp_processor_id())); @@ -1691,8 +1691,8 @@ static void smp_flush_cache_range(struct vm_area_struct *vma, cpumask_copy(&cpu_mask, mm_cpumask(mm)); cpumask_clear_cpu(smp_processor_id(), &cpu_mask); if (!cpumask_empty(&cpu_mask)) - xc3((smpfunc_t) local_ops->cache_range, - (unsigned long) vma, start, end); + xc3(local_ops->cache_range, (unsigned long)vma, start, + end); local_ops->cache_range(vma, start, end); } } @@ -1708,8 +1708,8 @@ static void smp_flush_tlb_range(struct vm_area_struct *vma, cpumask_copy(&cpu_mask, mm_cpumask(mm)); cpumask_clear_cpu(smp_processor_id(), &cpu_mask); if (!cpumask_empty(&cpu_mask)) - xc3((smpfunc_t) local_ops->tlb_range, - (unsigned long) vma, start, end); + xc3(local_ops->tlb_range, (unsigned long)vma, start, + end); local_ops->tlb_range(vma, start, end); } } @@ -1723,8 +1723,7 @@ static void smp_flush_cache_page(struct vm_area_struct *vma, unsigned long page) cpumask_copy(&cpu_mask, mm_cpumask(mm)); cpumask_clear_cpu(smp_processor_id(), &cpu_mask); if (!cpumask_empty(&cpu_mask)) - xc2((smpfunc_t) local_ops->cache_page, - (unsigned long) vma, page); + xc2(local_ops->cache_page, (unsigned long)vma, page); local_ops->cache_page(vma, page); } } @@ -1738,8 +1737,7 @@ static void smp_flush_tlb_page(struct vm_area_struct *vma, unsigned long page) cpumask_copy(&cpu_mask, mm_cpumask(mm)); cpumask_clear_cpu(smp_processor_id(), &cpu_mask); if (!cpumask_empty(&cpu_mask)) - xc2((smpfunc_t) local_ops->tlb_page, - (unsigned long) vma, page); + xc2(local_ops->tlb_page, (unsigned long)vma, page); local_ops->tlb_page(vma, page); } } @@ -1753,7 +1751,7 @@ static void smp_flush_page_to_ram(unsigned long page) * XXX This experiment failed, research further... -DaveM */ #if 1 - xc1((smpfunc_t) local_ops->page_to_ram, page); + xc1(local_ops->page_to_ram, page); #endif local_ops->page_to_ram(page); } @@ -1764,8 +1762,7 @@ static void smp_flush_sig_insns(struct mm_struct *mm, unsigned long insn_addr) cpumask_copy(&cpu_mask, mm_cpumask(mm)); cpumask_clear_cpu(smp_processor_id(), &cpu_mask); if (!cpumask_empty(&cpu_mask)) - xc2((smpfunc_t) local_ops->sig_insns, - (unsigned long) mm, insn_addr); + xc2(local_ops->sig_insns, (unsigned long)mm, insn_addr); local_ops->sig_insns(mm, insn_addr); } diff --git a/arch/um/Kconfig b/arch/um/Kconfig index 78de31ac1da7..ad4ff3b0e91e 100644 --- a/arch/um/Kconfig +++ b/arch/um/Kconfig @@ -6,6 +6,7 @@ config UML bool default y select ARCH_EPHEMERAL_INODES + select ARCH_HAS_FORTIFY_SOURCE select ARCH_HAS_GCOV_PROFILE_ALL select ARCH_HAS_KCOV select ARCH_HAS_STRNCPY_FROM_USER diff --git a/arch/um/Makefile b/arch/um/Makefile index f2fe63bfd819..f1d4d67157be 100644 --- a/arch/um/Makefile +++ b/arch/um/Makefile @@ -132,10 +132,18 @@ export LDS_ELF_FORMAT := $(ELF_FORMAT) # The wrappers will select whether using "malloc" or the kernel allocator. LINK_WRAPS = -Wl,--wrap,malloc -Wl,--wrap,free -Wl,--wrap,calloc +# Avoid binutils 2.39+ warnings by marking the stack non-executable and +# ignorning warnings for the kallsyms sections. +LDFLAGS_EXECSTACK = -z noexecstack +ifeq ($(CONFIG_LD_IS_BFD),y) +LDFLAGS_EXECSTACK += $(call ld-option,--no-warn-rwx-segments) +endif + LD_FLAGS_CMDLINE = $(foreach opt,$(KBUILD_LDFLAGS),-Wl,$(opt)) # Used by link-vmlinux.sh which has special support for um link export CFLAGS_vmlinux := $(LINK-y) $(LINK_WRAPS) $(LD_FLAGS_CMDLINE) +export LDFLAGS_vmlinux := $(LDFLAGS_EXECSTACK) # When cleaning we don't include .config, so we don't include # TT or skas makefiles and don't clean skas_ptregs.h. diff --git a/arch/um/kernel/sysrq.c b/arch/um/kernel/sysrq.c index 7452f70d50d0..746715379f12 100644 --- a/arch/um/kernel/sysrq.c +++ b/arch/um/kernel/sysrq.c @@ -48,7 +48,8 @@ void show_stack(struct task_struct *task, unsigned long *stack, break; if (i && ((i % STACKSLOTS_PER_LINE) == 0)) pr_cont("\n"); - pr_cont(" %08lx", *stack++); + pr_cont(" %08lx", READ_ONCE_NOCHECK(*stack)); + stack++; } printk("%sCall Trace:\n", loglvl); diff --git a/arch/um/kernel/um_arch.c b/arch/um/kernel/um_arch.c index e0de60e503b9..d9e023c78f56 100644 --- a/arch/um/kernel/um_arch.c +++ b/arch/um/kernel/um_arch.c @@ -33,7 +33,7 @@ #include "um_arch.h" #define DEFAULT_COMMAND_LINE_ROOT "root=98:0" -#define DEFAULT_COMMAND_LINE_CONSOLE "console=tty" +#define DEFAULT_COMMAND_LINE_CONSOLE "console=tty0" /* Changed in add_arg and setup_arch, which run before SMP is started */ static char __initdata command_line[COMMAND_LINE_SIZE] = { 0 }; diff --git a/arch/um/os-Linux/user_syms.c b/arch/um/os-Linux/user_syms.c index cb667c9225ab..fd575ecbcaec 100644 --- a/arch/um/os-Linux/user_syms.c +++ b/arch/um/os-Linux/user_syms.c @@ -1,4 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 +#define __NO_FORTIFY #include <linux/types.h> #include <linux/module.h> diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index f9920f1341c8..088af7c84e5d 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -107,6 +107,8 @@ config X86 select ARCH_SUPPORTS_PAGE_TABLE_CHECK if X86_64 select ARCH_SUPPORTS_NUMA_BALANCING if X86_64 select ARCH_SUPPORTS_KMAP_LOCAL_FORCE_MAP if NR_CPUS <= 4096 + select ARCH_SUPPORTS_CFI_CLANG if X86_64 + select ARCH_USES_CFI_TRAPS if X86_64 && CFI_CLANG select ARCH_SUPPORTS_LTO_CLANG select ARCH_SUPPORTS_LTO_CLANG_THIN select ARCH_USE_BUILTIN_BSWAP @@ -257,6 +259,7 @@ config X86 select HAVE_STATIC_CALL_INLINE if HAVE_OBJTOOL select HAVE_PREEMPT_DYNAMIC_CALL select HAVE_RSEQ + select HAVE_RUST if X86_64 select HAVE_SYSCALL_TRACEPOINTS select HAVE_UACCESS_VALIDATION if HAVE_OBJTOOL select HAVE_UNSTABLE_SCHED_CLOCK @@ -284,6 +287,7 @@ config X86 select PROC_PID_ARCH_STATUS if PROC_FS select HAVE_ARCH_NODE_DEV_GROUP if X86_SGX imply IMA_SECURE_AND_OR_TRUSTED_BOOT if EFI + select HAVE_DYNAMIC_FTRACE_NO_PATCHABLE config INSTRUCTION_DECODER def_bool y @@ -448,6 +452,11 @@ config X86_X2APIC This allows 32-bit apic IDs (so it can support very large systems), and accesses the local apic via MSRs not via mmio. + Some Intel systems circa 2022 and later are locked into x2APIC mode + and can not fall back to the legacy APIC modes if SGX or TDX are + enabled in the BIOS. They will be unable to boot without enabling + this option. + If you don't know what to do here, say N. config X86_MPPARSE @@ -1919,7 +1928,7 @@ endchoice config X86_SGX bool "Software Guard eXtensions (SGX)" - depends on X86_64 && CPU_SUP_INTEL + depends on X86_64 && CPU_SUP_INTEL && X86_X2APIC depends on CRYPTO=y depends on CRYPTO_SHA256=y select SRCU @@ -2569,7 +2578,7 @@ menuconfig APM 1) make sure that you have enough swap space and that it is enabled. - 2) pass the "no-hlt" option to the kernel + 2) pass the "idle=poll" option to the kernel 3) switch on floating point emulation in the kernel and pass the "no387" option to the kernel 4) pass the "floppy=nodma" option to the kernel diff --git a/arch/x86/Makefile b/arch/x86/Makefile index bafbd905e6e7..2d7e640674c6 100644 --- a/arch/x86/Makefile +++ b/arch/x86/Makefile @@ -68,6 +68,7 @@ export BITS # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=53383 # KBUILD_CFLAGS += -mno-sse -mno-mmx -mno-sse2 -mno-3dnow -mno-avx +KBUILD_RUSTFLAGS += -Ctarget-feature=-sse,-sse2,-sse3,-ssse3,-sse4.1,-sse4.2,-avx,-avx2 ifeq ($(CONFIG_X86_KERNEL_IBT),y) # @@ -155,8 +156,17 @@ else cflags-$(CONFIG_GENERIC_CPU) += -mtune=generic KBUILD_CFLAGS += $(cflags-y) + rustflags-$(CONFIG_MK8) += -Ctarget-cpu=k8 + rustflags-$(CONFIG_MPSC) += -Ctarget-cpu=nocona + rustflags-$(CONFIG_MCORE2) += -Ctarget-cpu=core2 + rustflags-$(CONFIG_MATOM) += -Ctarget-cpu=atom + rustflags-$(CONFIG_GENERIC_CPU) += -Ztune-cpu=generic + KBUILD_RUSTFLAGS += $(rustflags-y) + KBUILD_CFLAGS += -mno-red-zone KBUILD_CFLAGS += -mcmodel=kernel + KBUILD_RUSTFLAGS += -Cno-redzone=y + KBUILD_RUSTFLAGS += -Ccode-model=kernel endif # diff --git a/arch/x86/boot/bitops.h b/arch/x86/boot/bitops.h index 02e1dea11d94..8518ae214c9b 100644 --- a/arch/x86/boot/bitops.h +++ b/arch/x86/boot/bitops.h @@ -19,13 +19,13 @@ static inline bool constant_test_bit(int nr, const void *addr) { - const u32 *p = (const u32 *)addr; + const u32 *p = addr; return ((1UL << (nr & 31)) & (p[nr >> 5])) != 0; } static inline bool variable_test_bit(int nr, const void *addr) { bool v; - const u32 *p = (const u32 *)addr; + const u32 *p = addr; asm("btl %2,%1" CC_SET(c) : CC_OUT(c) (v) : "m" (*p), "Ir" (nr)); return v; diff --git a/arch/x86/crypto/blowfish-x86_64-asm_64.S b/arch/x86/crypto/blowfish-x86_64-asm_64.S index 802d71582689..4a43e072d2d1 100644 --- a/arch/x86/crypto/blowfish-x86_64-asm_64.S +++ b/arch/x86/crypto/blowfish-x86_64-asm_64.S @@ -6,6 +6,7 @@ */ #include <linux/linkage.h> +#include <linux/cfi_types.h> .file "blowfish-x86_64-asm.S" .text @@ -141,7 +142,7 @@ SYM_FUNC_START(__blowfish_enc_blk) RET; SYM_FUNC_END(__blowfish_enc_blk) -SYM_FUNC_START(blowfish_dec_blk) +SYM_TYPED_FUNC_START(blowfish_dec_blk) /* input: * %rdi: ctx * %rsi: dst @@ -332,7 +333,7 @@ SYM_FUNC_START(__blowfish_enc_blk_4way) RET; SYM_FUNC_END(__blowfish_enc_blk_4way) -SYM_FUNC_START(blowfish_dec_blk_4way) +SYM_TYPED_FUNC_START(blowfish_dec_blk_4way) /* input: * %rdi: ctx * %rsi: dst diff --git a/arch/x86/entry/vdso/Makefile b/arch/x86/entry/vdso/Makefile index 12f6c4d714cd..381d3333b996 100644 --- a/arch/x86/entry/vdso/Makefile +++ b/arch/x86/entry/vdso/Makefile @@ -91,7 +91,7 @@ ifneq ($(RETPOLINE_VDSO_CFLAGS),) endif endif -$(vobjs): KBUILD_CFLAGS := $(filter-out $(CC_FLAGS_LTO) $(RANDSTRUCT_CFLAGS) $(GCC_PLUGINS_CFLAGS) $(RETPOLINE_CFLAGS),$(KBUILD_CFLAGS)) $(CFL) +$(vobjs): KBUILD_CFLAGS := $(filter-out $(CC_FLAGS_LTO) $(CC_FLAGS_CFI) $(RANDSTRUCT_CFLAGS) $(GCC_PLUGINS_CFLAGS) $(RETPOLINE_CFLAGS),$(KBUILD_CFLAGS)) $(CFL) $(vobjs): KBUILD_AFLAGS += -DBUILD_VDSO # @@ -153,6 +153,7 @@ KBUILD_CFLAGS_32 := $(filter-out $(RANDSTRUCT_CFLAGS),$(KBUILD_CFLAGS_32)) KBUILD_CFLAGS_32 := $(filter-out $(GCC_PLUGINS_CFLAGS),$(KBUILD_CFLAGS_32)) KBUILD_CFLAGS_32 := $(filter-out $(RETPOLINE_CFLAGS),$(KBUILD_CFLAGS_32)) KBUILD_CFLAGS_32 := $(filter-out $(CC_FLAGS_LTO),$(KBUILD_CFLAGS_32)) +KBUILD_CFLAGS_32 := $(filter-out $(CC_FLAGS_CFI),$(KBUILD_CFLAGS_32)) KBUILD_CFLAGS_32 += -m32 -msoft-float -mregparm=0 -fpic KBUILD_CFLAGS_32 += -fno-stack-protector KBUILD_CFLAGS_32 += $(call cc-option, -foptimize-sibling-calls) diff --git a/arch/x86/events/intel/core.c b/arch/x86/events/intel/core.c index c601939a74b1..c20d8cd47c48 100644 --- a/arch/x86/events/intel/core.c +++ b/arch/x86/events/intel/core.c @@ -2102,6 +2102,15 @@ static struct extra_reg intel_tnt_extra_regs[] __read_mostly = { EVENT_EXTRA_END }; +EVENT_ATTR_STR(mem-loads, mem_ld_grt, "event=0xd0,umask=0x5,ldlat=3"); +EVENT_ATTR_STR(mem-stores, mem_st_grt, "event=0xd0,umask=0x6"); + +static struct attribute *grt_mem_attrs[] = { + EVENT_PTR(mem_ld_grt), + EVENT_PTR(mem_st_grt), + NULL +}; + static struct extra_reg intel_grt_extra_regs[] __read_mostly = { /* must define OFFCORE_RSP_X first, see intel_fixup_er() */ INTEL_UEVENT_EXTRA_REG(0x01b7, MSR_OFFCORE_RSP_0, 0x3fffffffffull, RSP_0), @@ -5975,6 +5984,36 @@ __init int intel_pmu_init(void) name = "Tremont"; break; + case INTEL_FAM6_ALDERLAKE_N: + x86_pmu.mid_ack = true; + memcpy(hw_cache_event_ids, glp_hw_cache_event_ids, + sizeof(hw_cache_event_ids)); + memcpy(hw_cache_extra_regs, tnt_hw_cache_extra_regs, + sizeof(hw_cache_extra_regs)); + hw_cache_event_ids[C(ITLB)][C(OP_READ)][C(RESULT_ACCESS)] = -1; + + x86_pmu.event_constraints = intel_slm_event_constraints; + x86_pmu.pebs_constraints = intel_grt_pebs_event_constraints; + x86_pmu.extra_regs = intel_grt_extra_regs; + + x86_pmu.pebs_aliases = NULL; + x86_pmu.pebs_prec_dist = true; + x86_pmu.pebs_block = true; + x86_pmu.lbr_pt_coexist = true; + x86_pmu.flags |= PMU_FL_HAS_RSP_1; + x86_pmu.flags |= PMU_FL_INSTR_LATENCY; + + intel_pmu_pebs_data_source_grt(); + x86_pmu.pebs_latency_data = adl_latency_data_small; + x86_pmu.get_event_constraints = tnt_get_event_constraints; + x86_pmu.limit_period = spr_limit_period; + td_attr = tnt_events_attrs; + mem_attr = grt_mem_attrs; + extra_attr = nhm_format_attr; + pr_cont("Gracemont events, "); + name = "gracemont"; + break; + case INTEL_FAM6_WESTMERE: case INTEL_FAM6_WESTMERE_EP: case INTEL_FAM6_WESTMERE_EX: @@ -6317,7 +6356,6 @@ __init int intel_pmu_init(void) case INTEL_FAM6_ALDERLAKE: case INTEL_FAM6_ALDERLAKE_L: - case INTEL_FAM6_ALDERLAKE_N: case INTEL_FAM6_RAPTORLAKE: case INTEL_FAM6_RAPTORLAKE_P: /* diff --git a/arch/x86/events/intel/ds.c b/arch/x86/events/intel/ds.c index de1f55d51784..ac973c6f82ad 100644 --- a/arch/x86/events/intel/ds.c +++ b/arch/x86/events/intel/ds.c @@ -110,13 +110,18 @@ void __init intel_pmu_pebs_data_source_skl(bool pmem) __intel_pmu_pebs_data_source_skl(pmem, pebs_data_source); } -static void __init intel_pmu_pebs_data_source_grt(u64 *data_source) +static void __init __intel_pmu_pebs_data_source_grt(u64 *data_source) { data_source[0x05] = OP_LH | P(LVL, L3) | LEVEL(L3) | P(SNOOP, HIT); data_source[0x06] = OP_LH | P(LVL, L3) | LEVEL(L3) | P(SNOOP, HITM); data_source[0x08] = OP_LH | P(LVL, L3) | LEVEL(L3) | P(SNOOPX, FWD); } +void __init intel_pmu_pebs_data_source_grt(void) +{ + __intel_pmu_pebs_data_source_grt(pebs_data_source); +} + void __init intel_pmu_pebs_data_source_adl(void) { u64 *data_source; @@ -127,7 +132,7 @@ void __init intel_pmu_pebs_data_source_adl(void) data_source = x86_pmu.hybrid_pmu[X86_HYBRID_PMU_ATOM_IDX].pebs_data_source; memcpy(data_source, pebs_data_source, sizeof(pebs_data_source)); - intel_pmu_pebs_data_source_grt(data_source); + __intel_pmu_pebs_data_source_grt(data_source); } static u64 precise_store_data(u64 status) diff --git a/arch/x86/events/perf_event.h b/arch/x86/events/perf_event.h index ba3d24a6a4ec..266143abcbd8 100644 --- a/arch/x86/events/perf_event.h +++ b/arch/x86/events/perf_event.h @@ -1516,6 +1516,8 @@ void intel_pmu_pebs_data_source_skl(bool pmem); void intel_pmu_pebs_data_source_adl(void); +void intel_pmu_pebs_data_source_grt(void); + int intel_pmu_setup_lbr_filter(struct perf_event *event); void intel_pt_interrupt(void); diff --git a/arch/x86/include/asm/acrn.h b/arch/x86/include/asm/acrn.h index e003a01b7c67..1dd14381bcb6 100644 --- a/arch/x86/include/asm/acrn.h +++ b/arch/x86/include/asm/acrn.h @@ -10,6 +10,15 @@ /* Bit 0 indicates whether guest VM is privileged */ #define ACRN_FEATURE_PRIVILEGED_VM BIT(0) +/* + * Timing Information. + * This leaf returns the current TSC frequency in kHz. + * + * EAX: (Virtual) TSC frequency in kHz. + * EBX, ECX, EDX: RESERVED (reserved fields are set to zero). + */ +#define ACRN_CPUID_TIMING_INFO 0x40000010 + void acrn_setup_intr_handler(void (*handler)(void)); void acrn_remove_intr_handler(void); @@ -21,6 +30,11 @@ static inline u32 acrn_cpuid_base(void) return 0; } +static inline unsigned long acrn_get_tsc_khz(void) +{ + return cpuid_eax(ACRN_CPUID_TIMING_INFO); +} + /* * Hypercalls for ACRN * diff --git a/arch/x86/include/asm/bitops.h b/arch/x86/include/asm/bitops.h index 0fe9de58af31..2edf68475fec 100644 --- a/arch/x86/include/asm/bitops.h +++ b/arch/x86/include/asm/bitops.h @@ -247,17 +247,30 @@ arch_test_bit_acquire(unsigned long nr, const volatile unsigned long *addr) variable_test_bit(nr, addr); } +static __always_inline unsigned long variable__ffs(unsigned long word) +{ + asm("rep; bsf %1,%0" + : "=r" (word) + : "rm" (word)); + return word; +} + /** * __ffs - find first set bit in word * @word: The word to search * * Undefined if no bit exists, so code should check against 0 first. */ -static __always_inline unsigned long __ffs(unsigned long word) +#define __ffs(word) \ + (__builtin_constant_p(word) ? \ + (unsigned long)__builtin_ctzl(word) : \ + variable__ffs(word)) + +static __always_inline unsigned long variable_ffz(unsigned long word) { asm("rep; bsf %1,%0" : "=r" (word) - : "rm" (word)); + : "r" (~word)); return word; } @@ -267,13 +280,10 @@ static __always_inline unsigned long __ffs(unsigned long word) * * Undefined if no zero exists, so code should check against ~0UL first. */ -static __always_inline unsigned long ffz(unsigned long word) -{ - asm("rep; bsf %1,%0" - : "=r" (word) - : "r" (~word)); - return word; -} +#define ffz(word) \ + (__builtin_constant_p(word) ? \ + (unsigned long)__builtin_ctzl(~word) : \ + variable_ffz(word)) /* * __fls: find last set bit in word @@ -292,18 +302,7 @@ static __always_inline unsigned long __fls(unsigned long word) #undef ADDR #ifdef __KERNEL__ -/** - * ffs - find first set bit in word - * @x: the word to search - * - * This is defined the same way as the libc and compiler builtin ffs - * routines, therefore differs in spirit from the other bitops. - * - * ffs(value) returns 0 if value is 0 or the position of the first - * set bit if value is nonzero. The first (least significant) bit - * is at position 1. - */ -static __always_inline int ffs(int x) +static __always_inline int variable_ffs(int x) { int r; @@ -334,6 +333,19 @@ static __always_inline int ffs(int x) } /** + * ffs - find first set bit in word + * @x: the word to search + * + * This is defined the same way as the libc and compiler builtin ffs + * routines, therefore differs in spirit from the other bitops. + * + * ffs(value) returns 0 if value is 0 or the position of the first + * set bit if value is nonzero. The first (least significant) bit + * is at position 1. + */ +#define ffs(x) (__builtin_constant_p(x) ? __builtin_ffs(x) : variable_ffs(x)) + +/** * fls - find last set bit in word * @x: the word to search * diff --git a/arch/x86/include/asm/cfi.h b/arch/x86/include/asm/cfi.h new file mode 100644 index 000000000000..58dacd90daef --- /dev/null +++ b/arch/x86/include/asm/cfi.h @@ -0,0 +1,22 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_X86_CFI_H +#define _ASM_X86_CFI_H + +/* + * Clang Control Flow Integrity (CFI) support. + * + * Copyright (C) 2022 Google LLC + */ + +#include <linux/cfi.h> + +#ifdef CONFIG_CFI_CLANG +enum bug_trap_type handle_cfi_failure(struct pt_regs *regs); +#else +static inline enum bug_trap_type handle_cfi_failure(struct pt_regs *regs) +{ + return BUG_TRAP_TYPE_NONE; +} +#endif /* CONFIG_CFI_CLANG */ + +#endif /* _ASM_X86_CFI_H */ diff --git a/arch/x86/include/asm/cpu.h b/arch/x86/include/asm/cpu.h index 8cbf623f0ecf..b472ef76826a 100644 --- a/arch/x86/include/asm/cpu.h +++ b/arch/x86/include/asm/cpu.h @@ -94,4 +94,6 @@ static inline bool intel_cpu_signatures_match(unsigned int s1, unsigned int p1, return p1 & p2; } +extern u64 x86_read_arch_cap_msr(void); + #endif /* _ASM_X86_CPU_H */ diff --git a/arch/x86/include/asm/intel-family.h b/arch/x86/include/asm/intel-family.h index aeb38023a703..5d75fe229342 100644 --- a/arch/x86/include/asm/intel-family.h +++ b/arch/x86/include/asm/intel-family.h @@ -115,6 +115,9 @@ #define INTEL_FAM6_RAPTORLAKE_P 0xBA #define INTEL_FAM6_RAPTORLAKE_S 0xBF +#define INTEL_FAM6_METEORLAKE 0xAC +#define INTEL_FAM6_METEORLAKE_L 0xAA + /* "Small Core" Processors (Atom) */ #define INTEL_FAM6_ATOM_BONNELL 0x1C /* Diamondville, Pineview */ diff --git a/arch/x86/include/asm/irq_stack.h b/arch/x86/include/asm/irq_stack.h index 63f818aedf77..147cb8fdda92 100644 --- a/arch/x86/include/asm/irq_stack.h +++ b/arch/x86/include/asm/irq_stack.h @@ -203,7 +203,7 @@ IRQ_CONSTRAINTS, regs, vector); \ } -#ifndef CONFIG_PREEMPT_RT +#ifdef CONFIG_SOFTIRQ_ON_OWN_STACK /* * Macro to invoke __do_softirq on the irq stack. This is only called from * task context when bottom halves are about to be reenabled and soft diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h index 2c96c43c313a..aa381ab69a19 100644 --- a/arch/x86/include/asm/kvm_host.h +++ b/arch/x86/include/asm/kvm_host.h @@ -729,6 +729,7 @@ struct kvm_vcpu_arch { struct fpu_guest guest_fpu; u64 xcr0; + u64 guest_supported_xcr0; struct kvm_pio_request pio; void *pio_data; diff --git a/arch/x86/include/asm/linkage.h b/arch/x86/include/asm/linkage.h index 73ca20049835..f484d656d34e 100644 --- a/arch/x86/include/asm/linkage.h +++ b/arch/x86/include/asm/linkage.h @@ -43,6 +43,18 @@ #endif /* __ASSEMBLY__ */ +#define __CFI_TYPE(name) \ + SYM_START(__cfi_##name, SYM_L_LOCAL, SYM_A_NONE) \ + .fill 11, 1, 0x90 ASM_NL \ + .byte 0xb8 ASM_NL \ + .long __kcfi_typeid_##name ASM_NL \ + SYM_FUNC_END(__cfi_##name) + +/* SYM_TYPED_FUNC_START -- use for indirectly called globals, w/ CFI type */ +#define SYM_TYPED_FUNC_START(name) \ + SYM_TYPED_START(name, SYM_L_GLOBAL, SYM_A_ALIGN) \ + ENDBR + /* SYM_FUNC_START -- use for global functions */ #define SYM_FUNC_START(name) \ SYM_START(name, SYM_L_GLOBAL, SYM_A_ALIGN) \ diff --git a/arch/x86/include/asm/mc146818rtc.h b/arch/x86/include/asm/mc146818rtc.h index 97198001e567..6115bb3d5795 100644 --- a/arch/x86/include/asm/mc146818rtc.h +++ b/arch/x86/include/asm/mc146818rtc.h @@ -95,7 +95,7 @@ static inline unsigned char current_lock_cmos_reg(void) unsigned char rtc_cmos_read(unsigned char addr); void rtc_cmos_write(unsigned char val, unsigned char addr); -extern int mach_set_rtc_mmss(const struct timespec64 *now); +extern int mach_set_cmos_time(const struct timespec64 *now); extern void mach_get_cmos_time(struct timespec64 *now); #define RTC_IRQ 8 diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h index cc73061e7255..6e986088817d 100644 --- a/arch/x86/include/asm/mce.h +++ b/arch/x86/include/asm/mce.h @@ -42,6 +42,7 @@ #define MCI_STATUS_CEC_SHIFT 38 /* Corrected Error Count */ #define MCI_STATUS_CEC_MASK GENMASK_ULL(52,38) #define MCI_STATUS_CEC(c) (((c) & MCI_STATUS_CEC_MASK) >> MCI_STATUS_CEC_SHIFT) +#define MCI_STATUS_MSCOD(m) (((m) >> 16) & 0xffff) /* AMD-specific bits */ #define MCI_STATUS_TCC BIT_ULL(55) /* Task context corrupt */ diff --git a/arch/x86/include/asm/microcode.h b/arch/x86/include/asm/microcode.h index 0c3d3440fe27..74ecc2bd6cd0 100644 --- a/arch/x86/include/asm/microcode.h +++ b/arch/x86/include/asm/microcode.h @@ -9,6 +9,7 @@ struct ucode_patch { struct list_head plist; void *data; /* Intel uses only this one */ + unsigned int size; u32 patch_id; u16 equiv_cpu; }; @@ -32,9 +33,6 @@ enum ucode_state { }; struct microcode_ops { - enum ucode_state (*request_microcode_user) (int cpu, - const void __user *buf, size_t size); - enum ucode_state (*request_microcode_fw) (int cpu, struct device *, bool refresh_fw); diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h index 6674bdb096f3..1e086b37a307 100644 --- a/arch/x86/include/asm/msr-index.h +++ b/arch/x86/include/asm/msr-index.h @@ -155,6 +155,11 @@ * Return Stack Buffer Predictions. */ +#define ARCH_CAP_XAPIC_DISABLE BIT(21) /* + * IA32_XAPIC_DISABLE_STATUS MSR + * supported + */ + #define MSR_IA32_FLUSH_CMD 0x0000010b #define L1D_FLUSH BIT(0) /* * Writeback and invalidate the @@ -1054,4 +1059,12 @@ #define MSR_IA32_HW_FEEDBACK_PTR 0x17d0 #define MSR_IA32_HW_FEEDBACK_CONFIG 0x17d1 +/* x2APIC locked status */ +#define MSR_IA32_XAPIC_DISABLE_STATUS 0xBD +#define LEGACY_XAPIC_DISABLED BIT(0) /* + * x2APIC mode is locked and + * disabling x2APIC will cause + * a #GP + */ + #endif /* _ASM_X86_MSR_INDEX_H */ diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h index 964442b99245..2a0b8dd4ec33 100644 --- a/arch/x86/include/asm/paravirt.h +++ b/arch/x86/include/asm/paravirt.h @@ -743,6 +743,7 @@ extern void default_banner(void); word 771b; \ .byte ptype; \ .byte 772b-771b; \ + _ASM_ALIGN; \ .popsection diff --git a/arch/x86/include/asm/paravirt_types.h b/arch/x86/include/asm/paravirt_types.h index 89df6c6617f5..f3d601574730 100644 --- a/arch/x86/include/asm/paravirt_types.h +++ b/arch/x86/include/asm/paravirt_types.h @@ -294,6 +294,7 @@ extern struct paravirt_patch_template pv_ops; " .byte " type "\n" \ " .byte 772b-771b\n" \ " .short " clobber "\n" \ + _ASM_ALIGN "\n" \ ".popsection\n" /* Generate patchable code, with the default asm parameters. */ @@ -328,7 +329,7 @@ int paravirt_disable_iospace(void); * Unfortunately, this is a relatively slow operation for modern CPUs, * because it cannot necessarily determine what the destination * address is. In this case, the address is a runtime constant, so at - * the very least we can patch the call to e a simple direct call, or + * the very least we can patch the call to a simple direct call, or, * ideally, patch an inline implementation into the callsite. (Direct * calls are essentially free, because the call and return addresses * are completely predictable.) @@ -339,10 +340,10 @@ int paravirt_disable_iospace(void); * on the stack. All caller-save registers (eax,edx,ecx) are expected * to be modified (either clobbered or used for return values). * X86_64, on the other hand, already specifies a register-based calling - * conventions, returning at %rax, with parameters going on %rdi, %rsi, + * conventions, returning at %rax, with parameters going in %rdi, %rsi, * %rdx, and %rcx. Note that for this reason, x86_64 does not need any * special handling for dealing with 4 arguments, unlike i386. - * However, x86_64 also have to clobber all caller saved registers, which + * However, x86_64 also has to clobber all caller saved registers, which * unfortunately, are quite a bit (r8 - r11) * * The call instruction itself is marked by placing its start address @@ -360,22 +361,22 @@ int paravirt_disable_iospace(void); * There are 5 sets of PVOP_* macros for dealing with 0-4 arguments. * It could be extended to more arguments, but there would be little * to be gained from that. For each number of arguments, there are - * the two VCALL and CALL variants for void and non-void functions. + * two VCALL and CALL variants for void and non-void functions. * * When there is a return value, the invoker of the macro must specify * the return type. The macro then uses sizeof() on that type to - * determine whether its a 32 or 64 bit value, and places the return + * determine whether it's a 32 or 64 bit value and places the return * in the right register(s) (just %eax for 32-bit, and %edx:%eax for - * 64-bit). For x86_64 machines, it just returns at %rax regardless of + * 64-bit). For x86_64 machines, it just returns in %rax regardless of * the return value size. * - * 64-bit arguments are passed as a pair of adjacent 32-bit arguments + * 64-bit arguments are passed as a pair of adjacent 32-bit arguments; * i386 also passes 64-bit arguments as a pair of adjacent 32-bit arguments * in low,high order * * Small structures are passed and returned in registers. The macro * calling convention can't directly deal with this, so the wrapper - * functions must do this. + * functions must do it. * * These PVOP_* macros are only defined within this header. This * means that all uses must be wrapped in inline functions. This also @@ -414,8 +415,17 @@ int paravirt_disable_iospace(void); "=c" (__ecx) #define PVOP_CALL_CLOBBERS PVOP_VCALL_CLOBBERS, "=a" (__eax) -/* void functions are still allowed [re]ax for scratch */ +/* + * void functions are still allowed [re]ax for scratch. + * + * The ZERO_CALL_USED REGS feature may end up zeroing out callee-saved + * registers. Make sure we model this with the appropriate clobbers. + */ +#ifdef CONFIG_ZERO_CALL_USED_REGS +#define PVOP_VCALLEE_CLOBBERS "=a" (__eax), PVOP_VCALL_CLOBBERS +#else #define PVOP_VCALLEE_CLOBBERS "=a" (__eax) +#endif #define PVOP_CALLEE_CLOBBERS PVOP_VCALLEE_CLOBBERS #define EXTRA_CLOBBERS , "r8", "r9", "r10", "r11" diff --git a/arch/x86/include/asm/resctrl.h b/arch/x86/include/asm/resctrl.h index d60ed0668a59..d24b04ebf950 100644 --- a/arch/x86/include/asm/resctrl.h +++ b/arch/x86/include/asm/resctrl.h @@ -81,6 +81,15 @@ static void __resctrl_sched_in(void) } } +static inline unsigned int resctrl_arch_round_mon_val(unsigned int val) +{ + unsigned int scale = boot_cpu_data.x86_cache_occ_scale; + + /* h/w works in units of "boot_cpu_data.x86_cache_occ_scale" */ + val /= scale; + return val * scale; +} + static inline void resctrl_sched_in(void) { if (static_branch_likely(&rdt_enable_key)) diff --git a/arch/x86/include/asm/smp.h b/arch/x86/include/asm/smp.h index 81a0211a372d..a73bced40e24 100644 --- a/arch/x86/include/asm/smp.h +++ b/arch/x86/include/asm/smp.h @@ -21,16 +21,6 @@ DECLARE_PER_CPU_READ_MOSTLY(u16, cpu_llc_id); DECLARE_PER_CPU_READ_MOSTLY(u16, cpu_l2c_id); DECLARE_PER_CPU_READ_MOSTLY(int, cpu_number); -static inline struct cpumask *cpu_llc_shared_mask(int cpu) -{ - return per_cpu(cpu_llc_shared_map, cpu); -} - -static inline struct cpumask *cpu_l2c_shared_mask(int cpu) -{ - return per_cpu(cpu_l2c_shared_map, cpu); -} - DECLARE_EARLY_PER_CPU_READ_MOSTLY(u16, x86_cpu_to_apicid); DECLARE_EARLY_PER_CPU_READ_MOSTLY(u32, x86_cpu_to_acpiid); DECLARE_EARLY_PER_CPU_READ_MOSTLY(u16, x86_bios_cpu_apicid); @@ -172,6 +162,16 @@ extern int safe_smp_processor_id(void); # define safe_smp_processor_id() smp_processor_id() #endif +static inline struct cpumask *cpu_llc_shared_mask(int cpu) +{ + return per_cpu(cpu_llc_shared_map, cpu); +} + +static inline struct cpumask *cpu_l2c_shared_mask(int cpu) +{ + return per_cpu(cpu_l2c_shared_map, cpu); +} + #else /* !CONFIG_SMP */ #define wbinvd_on_cpu(cpu) wbinvd() static inline int wbinvd_on_all_cpus(void) @@ -179,6 +179,11 @@ static inline int wbinvd_on_all_cpus(void) wbinvd(); return 0; } + +static inline struct cpumask *cpu_llc_shared_mask(int cpu) +{ + return (struct cpumask *)cpumask_of(0); +} #endif /* CONFIG_SMP */ extern unsigned disabled_cpus; diff --git a/arch/x86/include/asm/uaccess.h b/arch/x86/include/asm/uaccess.h index 913e593a3b45..1ec6a9ea2328 100644 --- a/arch/x86/include/asm/uaccess.h +++ b/arch/x86/include/asm/uaccess.h @@ -448,7 +448,7 @@ do { \ #ifdef CONFIG_X86_32 /* - * Unlike the normal CMPXCHG, hardcode ECX for both success/fail and error. + * Unlike the normal CMPXCHG, use output GPR for both success/fail and error. * There are only six GPRs available and four (EAX, EBX, ECX, and EDX) are * hardcoded by CMPXCHG8B, leaving only ESI and EDI. If the compiler uses * both ESI and EDI for the memory operand, compilation will fail if the error @@ -461,11 +461,12 @@ do { \ __typeof__(*(_ptr)) __new = (_new); \ asm volatile("\n" \ "1: " LOCK_PREFIX "cmpxchg8b %[ptr]\n" \ - "mov $0, %%ecx\n\t" \ - "setz %%cl\n" \ + "mov $0, %[result]\n\t" \ + "setz %b[result]\n" \ "2:\n" \ - _ASM_EXTABLE_TYPE_REG(1b, 2b, EX_TYPE_EFAULT_REG, %%ecx) \ - : [result]"=c" (__result), \ + _ASM_EXTABLE_TYPE_REG(1b, 2b, EX_TYPE_EFAULT_REG, \ + %[result]) \ + : [result] "=q" (__result), \ "+A" (__old), \ [ptr] "+m" (*_ptr) \ : "b" ((u32)__new), \ @@ -502,9 +503,6 @@ strncpy_from_user(char *dst, const char __user *src, long count); extern __must_check long strnlen_user(const char __user *str, long n); -unsigned long __must_check clear_user(void __user *mem, unsigned long len); -unsigned long __must_check __clear_user(void __user *mem, unsigned long len); - #ifdef CONFIG_ARCH_HAS_COPY_MC unsigned long __must_check copy_mc_to_kernel(void *to, const void *from, unsigned len); @@ -526,6 +524,8 @@ extern struct movsl_mask { #define ARCH_HAS_NOCACHE_UACCESS 1 #ifdef CONFIG_X86_32 +unsigned long __must_check clear_user(void __user *mem, unsigned long len); +unsigned long __must_check __clear_user(void __user *mem, unsigned long len); # include <asm/uaccess_32.h> #else # include <asm/uaccess_64.h> diff --git a/arch/x86/include/asm/uaccess_64.h b/arch/x86/include/asm/uaccess_64.h index 45697e04d771..d13d71af5cf6 100644 --- a/arch/x86/include/asm/uaccess_64.h +++ b/arch/x86/include/asm/uaccess_64.h @@ -79,4 +79,49 @@ __copy_from_user_flushcache(void *dst, const void __user *src, unsigned size) kasan_check_write(dst, size); return __copy_user_flushcache(dst, src, size); } + +/* + * Zero Userspace. + */ + +__must_check unsigned long +clear_user_original(void __user *addr, unsigned long len); +__must_check unsigned long +clear_user_rep_good(void __user *addr, unsigned long len); +__must_check unsigned long +clear_user_erms(void __user *addr, unsigned long len); + +static __always_inline __must_check unsigned long __clear_user(void __user *addr, unsigned long size) +{ + might_fault(); + stac(); + + /* + * No memory constraint because it doesn't change any memory gcc + * knows about. + */ + asm volatile( + "1:\n\t" + ALTERNATIVE_3("rep stosb", + "call clear_user_erms", ALT_NOT(X86_FEATURE_FSRM), + "call clear_user_rep_good", ALT_NOT(X86_FEATURE_ERMS), + "call clear_user_original", ALT_NOT(X86_FEATURE_REP_GOOD)) + "2:\n" + _ASM_EXTABLE_UA(1b, 2b) + : "+c" (size), "+D" (addr), ASM_CALL_CONSTRAINT + : "a" (0) + /* rep_good clobbers %rdx */ + : "rdx"); + + clac(); + + return size; +} + +static __always_inline unsigned long clear_user(void __user *to, unsigned long n) +{ + if (access_ok(to, n)) + return __clear_user(to, n); + return n; +} #endif /* _ASM_X86_UACCESS_64_H */ diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index a20a5ebfacd7..1286a73ebdbc 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -139,6 +139,8 @@ obj-$(CONFIG_UNWINDER_GUESS) += unwind_guess.o obj-$(CONFIG_AMD_MEM_ENCRYPT) += sev.o +obj-$(CONFIG_CFI_CLANG) += cfi.o + ### # 64 bit specific files ifeq ($(CONFIG_X86_64),y) diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c index 62f6b8b7c4a5..5cadcea035e0 100644 --- a/arch/x86/kernel/alternative.c +++ b/arch/x86/kernel/alternative.c @@ -453,6 +453,15 @@ static int patch_retpoline(void *addr, struct insn *insn, u8 *bytes) return ret; i += ret; + /* + * The compiler is supposed to EMIT an INT3 after every unconditional + * JMP instruction due to AMD BTC. However, if the compiler is too old + * or SLS isn't enabled, we still need an INT3 after indirect JMPs + * even on Intel. + */ + if (op == JMP32_INSN_OPCODE && i < insn->length) + bytes[i++] = INT3_INSN_OPCODE; + for (; i < insn->length;) bytes[i++] = BYTES_NOP1; @@ -1319,22 +1328,23 @@ struct bp_patching_desc { atomic_t refs; }; -static struct bp_patching_desc *bp_desc; +static struct bp_patching_desc bp_desc; static __always_inline -struct bp_patching_desc *try_get_desc(struct bp_patching_desc **descp) +struct bp_patching_desc *try_get_desc(void) { - /* rcu_dereference */ - struct bp_patching_desc *desc = __READ_ONCE(*descp); + struct bp_patching_desc *desc = &bp_desc; - if (!desc || !arch_atomic_inc_not_zero(&desc->refs)) + if (!arch_atomic_inc_not_zero(&desc->refs)) return NULL; return desc; } -static __always_inline void put_desc(struct bp_patching_desc *desc) +static __always_inline void put_desc(void) { + struct bp_patching_desc *desc = &bp_desc; + smp_mb__before_atomic(); arch_atomic_dec(&desc->refs); } @@ -1367,15 +1377,15 @@ noinstr int poke_int3_handler(struct pt_regs *regs) /* * Having observed our INT3 instruction, we now must observe - * bp_desc: + * bp_desc with non-zero refcount: * - * bp_desc = desc INT3 + * bp_desc.refs = 1 INT3 * WMB RMB - * write INT3 if (desc) + * write INT3 if (bp_desc.refs != 0) */ smp_rmb(); - desc = try_get_desc(&bp_desc); + desc = try_get_desc(); if (!desc) return 0; @@ -1429,7 +1439,7 @@ noinstr int poke_int3_handler(struct pt_regs *regs) ret = 1; out_put: - put_desc(desc); + put_desc(); return ret; } @@ -1460,18 +1470,20 @@ static int tp_vec_nr; */ static void text_poke_bp_batch(struct text_poke_loc *tp, unsigned int nr_entries) { - struct bp_patching_desc desc = { - .vec = tp, - .nr_entries = nr_entries, - .refs = ATOMIC_INIT(1), - }; unsigned char int3 = INT3_INSN_OPCODE; unsigned int i; int do_sync; lockdep_assert_held(&text_mutex); - smp_store_release(&bp_desc, &desc); /* rcu_assign_pointer */ + bp_desc.vec = tp; + bp_desc.nr_entries = nr_entries; + + /* + * Corresponds to the implicit memory barrier in try_get_desc() to + * ensure reading a non-zero refcount provides up to date bp_desc data. + */ + atomic_set_release(&bp_desc.refs, 1); /* * Corresponding read barrier in int3 notifier for making sure the @@ -1559,12 +1571,10 @@ static void text_poke_bp_batch(struct text_poke_loc *tp, unsigned int nr_entries text_poke_sync(); /* - * Remove and synchronize_rcu(), except we have a very primitive - * refcount based completion. + * Remove and wait for refs to be zero. */ - WRITE_ONCE(bp_desc, NULL); /* RCU_INIT_POINTER */ - if (!atomic_dec_and_test(&desc.refs)) - atomic_cond_read_acquire(&desc.refs, !VAL); + if (!atomic_dec_and_test(&bp_desc.refs)) + atomic_cond_read_acquire(&bp_desc.refs, !VAL); } static void text_poke_loc_init(struct text_poke_loc *tp, void *addr, diff --git a/arch/x86/kernel/amd_gart_64.c b/arch/x86/kernel/amd_gart_64.c index 194d54eed537..19a0207e529f 100644 --- a/arch/x86/kernel/amd_gart_64.c +++ b/arch/x86/kernel/amd_gart_64.c @@ -53,7 +53,7 @@ static u32 *iommu_gatt_base; /* Remapping table */ * of only flushing when an mapping is reused. With it true the GART is * flushed for every mapping. Problem is that doing the lazy flush seems * to trigger bugs with some popular PCI cards, in particular 3ware (but - * has been also also seen with Qlogic at least). + * has been also seen with Qlogic at least). */ static int iommu_fullflush = 1; diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c index 7a5630d904b2..4feaa670d578 100644 --- a/arch/x86/kernel/aperture_64.c +++ b/arch/x86/kernel/aperture_64.c @@ -36,7 +36,7 @@ /* * Using 512M as goal, in case kexec will load kernel_big * that will do the on-position decompress, and could overlap with - * with the gart aperture that is used. + * the gart aperture that is used. * Sequence: * kernel_small * ==> kexec (with kdump trigger path or gart still enabled) diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 6d303d1d276c..c6876d3ea4b1 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -61,6 +61,7 @@ #include <asm/cpu_device_id.h> #include <asm/intel-family.h> #include <asm/irq_regs.h> +#include <asm/cpu.h> unsigned int num_processors; @@ -1751,11 +1752,26 @@ EXPORT_SYMBOL_GPL(x2apic_mode); enum { X2APIC_OFF, - X2APIC_ON, X2APIC_DISABLED, + /* All states below here have X2APIC enabled */ + X2APIC_ON, + X2APIC_ON_LOCKED }; static int x2apic_state; +static bool x2apic_hw_locked(void) +{ + u64 ia32_cap; + u64 msr; + + ia32_cap = x86_read_arch_cap_msr(); + if (ia32_cap & ARCH_CAP_XAPIC_DISABLE) { + rdmsrl(MSR_IA32_XAPIC_DISABLE_STATUS, msr); + return (msr & LEGACY_XAPIC_DISABLED); + } + return false; +} + static void __x2apic_disable(void) { u64 msr; @@ -1793,6 +1809,10 @@ static int __init setup_nox2apic(char *str) apicid); return 0; } + if (x2apic_hw_locked()) { + pr_warn("APIC locked in x2apic mode, can't disable\n"); + return 0; + } pr_warn("x2apic already enabled.\n"); __x2apic_disable(); } @@ -1807,10 +1827,18 @@ early_param("nox2apic", setup_nox2apic); void x2apic_setup(void) { /* - * If x2apic is not in ON state, disable it if already enabled + * Try to make the AP's APIC state match that of the BSP, but if the + * BSP is unlocked and the AP is locked then there is a state mismatch. + * Warn about the mismatch in case a GP fault occurs due to a locked AP + * trying to be turned off. + */ + if (x2apic_state != X2APIC_ON_LOCKED && x2apic_hw_locked()) + pr_warn("x2apic lock mismatch between BSP and AP.\n"); + /* + * If x2apic is not in ON or LOCKED state, disable it if already enabled * from BIOS. */ - if (x2apic_state != X2APIC_ON) { + if (x2apic_state < X2APIC_ON) { __x2apic_disable(); return; } @@ -1831,6 +1859,11 @@ static __init void x2apic_disable(void) if (x2apic_id >= 255) panic("Cannot disable x2apic, id: %08x\n", x2apic_id); + if (x2apic_hw_locked()) { + pr_warn("Cannot disable locked x2apic, id: %08x\n", x2apic_id); + return; + } + __x2apic_disable(); register_lapic_address(mp_lapic_addr); } @@ -1889,7 +1922,10 @@ void __init check_x2apic(void) if (x2apic_enabled()) { pr_info("x2apic: enabled by BIOS, switching to x2apic ops\n"); x2apic_mode = 1; - x2apic_state = X2APIC_ON; + if (x2apic_hw_locked()) + x2apic_state = X2APIC_ON_LOCKED; + else + x2apic_state = X2APIC_ON; } else if (!boot_cpu_has(X86_FEATURE_X2APIC)) { x2apic_state = X2APIC_DISABLED; } diff --git a/arch/x86/kernel/cfi.c b/arch/x86/kernel/cfi.c new file mode 100644 index 000000000000..8674a5c0c031 --- /dev/null +++ b/arch/x86/kernel/cfi.c @@ -0,0 +1,86 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Clang Control Flow Integrity (CFI) support. + * + * Copyright (C) 2022 Google LLC + */ +#include <asm/cfi.h> +#include <asm/insn.h> +#include <asm/insn-eval.h> +#include <linux/string.h> + +/* + * Returns the target address and the expected type when regs->ip points + * to a compiler-generated CFI trap. + */ +static bool decode_cfi_insn(struct pt_regs *regs, unsigned long *target, + u32 *type) +{ + char buffer[MAX_INSN_SIZE]; + struct insn insn; + int offset = 0; + + *target = *type = 0; + + /* + * The compiler generates the following instruction sequence + * for indirect call checks: + * + *  movl -<id>, %r10d ; 6 bytes + * addl -4(%reg), %r10d ; 4 bytes + * je .Ltmp1 ; 2 bytes + * ud2 ; <- regs->ip + * .Ltmp1: + * + * We can decode the expected type and the target address from the + * movl/addl instructions. + */ + if (copy_from_kernel_nofault(buffer, (void *)regs->ip - 12, MAX_INSN_SIZE)) + return false; + if (insn_decode_kernel(&insn, &buffer[offset])) + return false; + if (insn.opcode.value != 0xBA) + return false; + + *type = -(u32)insn.immediate.value; + + if (copy_from_kernel_nofault(buffer, (void *)regs->ip - 6, MAX_INSN_SIZE)) + return false; + if (insn_decode_kernel(&insn, &buffer[offset])) + return false; + if (insn.opcode.value != 0x3) + return false; + + /* Read the target address from the register. */ + offset = insn_get_modrm_rm_off(&insn, regs); + if (offset < 0) + return false; + + *target = *(unsigned long *)((void *)regs + offset); + + return true; +} + +/* + * Checks if a ud2 trap is because of a CFI failure, and handles the trap + * if needed. Returns a bug_trap_type value similarly to report_bug. + */ +enum bug_trap_type handle_cfi_failure(struct pt_regs *regs) +{ + unsigned long target; + u32 type; + + if (!is_cfi_trap(regs->ip)) + return BUG_TRAP_TYPE_NONE; + + if (!decode_cfi_insn(regs, &target, &type)) + return report_cfi_failure_noaddr(regs, regs->ip); + + return report_cfi_failure(regs, regs->ip, &target, type); +} + +/* + * Ensure that __kcfi_typeid_ symbols are emitted for functions that may + * not be indirectly called with all configurations. + */ +__ADDRESSABLE(__memcpy) diff --git a/arch/x86/kernel/cpu/acrn.c b/arch/x86/kernel/cpu/acrn.c index 23f5f27b5a02..485441b7f030 100644 --- a/arch/x86/kernel/cpu/acrn.c +++ b/arch/x86/kernel/cpu/acrn.c @@ -28,6 +28,9 @@ static void __init acrn_init_platform(void) { /* Setup the IDT for ACRN hypervisor callback */ alloc_intr_gate(HYPERVISOR_CALLBACK_VECTOR, asm_sysvec_acrn_hv_callback); + + x86_platform.calibrate_tsc = acrn_get_tsc_khz; + x86_platform.calibrate_cpu = acrn_get_tsc_khz; } static bool acrn_x2apic_available(void) diff --git a/arch/x86/kernel/cpu/feat_ctl.c b/arch/x86/kernel/cpu/feat_ctl.c index 993697e71854..03851240c3e3 100644 --- a/arch/x86/kernel/cpu/feat_ctl.c +++ b/arch/x86/kernel/cpu/feat_ctl.c @@ -1,11 +1,11 @@ // SPDX-License-Identifier: GPL-2.0 #include <linux/tboot.h> +#include <asm/cpu.h> #include <asm/cpufeature.h> #include <asm/msr-index.h> #include <asm/processor.h> #include <asm/vmx.h> -#include "cpu.h" #undef pr_fmt #define pr_fmt(fmt) "x86/cpu: " fmt diff --git a/arch/x86/kernel/cpu/mce/apei.c b/arch/x86/kernel/cpu/mce/apei.c index 717192915f28..8ed341714686 100644 --- a/arch/x86/kernel/cpu/mce/apei.c +++ b/arch/x86/kernel/cpu/mce/apei.c @@ -29,15 +29,26 @@ void apei_mce_report_mem_error(int severity, struct cper_sec_mem_err *mem_err) { struct mce m; + int lsb; if (!(mem_err->validation_bits & CPER_MEM_VALID_PA)) return; + /* + * Even if the ->validation_bits are set for address mask, + * to be extra safe, check and reject an error radius '0', + * and fall back to the default page size. + */ + if (mem_err->validation_bits & CPER_MEM_VALID_PA_MASK) + lsb = find_first_bit((void *)&mem_err->physical_addr_mask, PAGE_SHIFT); + else + lsb = PAGE_SHIFT; + mce_setup(&m); m.bank = -1; /* Fake a memory read error with unknown channel */ m.status = MCI_STATUS_VAL | MCI_STATUS_EN | MCI_STATUS_ADDRV | MCI_STATUS_MISCV | 0x9f; - m.misc = (MCI_MISC_ADDR_PHYS << 6) | PAGE_SHIFT; + m.misc = (MCI_MISC_ADDR_PHYS << 6) | lsb; if (severity >= GHES_SEV_RECOVERABLE) m.status |= MCI_STATUS_UC; diff --git a/arch/x86/kernel/cpu/microcode/amd.c b/arch/x86/kernel/cpu/microcode/amd.c index 8b2fcdfa6d31..e7410e98fc1f 100644 --- a/arch/x86/kernel/cpu/microcode/amd.c +++ b/arch/x86/kernel/cpu/microcode/amd.c @@ -788,6 +788,7 @@ static int verify_and_add_patch(u8 family, u8 *fw, unsigned int leftover, kfree(patch); return -EINVAL; } + patch->size = *patch_size; mc_hdr = (struct microcode_header_amd *)(fw + SECTION_HDR_SIZE); proc_id = mc_hdr->processor_rev_id; @@ -869,7 +870,7 @@ load_microcode_amd(bool save, u8 family, const u8 *data, size_t size) return ret; memset(amd_ucode_patch, 0, PATCH_MAX_SIZE); - memcpy(amd_ucode_patch, p->data, min_t(u32, ksize(p->data), PATCH_MAX_SIZE)); + memcpy(amd_ucode_patch, p->data, min_t(u32, p->size, PATCH_MAX_SIZE)); return ret; } @@ -924,12 +925,6 @@ static enum ucode_state request_microcode_amd(int cpu, struct device *device, return ret; } -static enum ucode_state -request_microcode_user(int cpu, const void __user *buf, size_t size) -{ - return UCODE_ERROR; -} - static void microcode_fini_cpu_amd(int cpu) { struct ucode_cpu_info *uci = ucode_cpu_info + cpu; @@ -938,7 +933,6 @@ static void microcode_fini_cpu_amd(int cpu) } static struct microcode_ops microcode_amd_ops = { - .request_microcode_user = request_microcode_user, .request_microcode_fw = request_microcode_amd, .collect_cpu_info = collect_cpu_info_amd, .apply_microcode = apply_microcode_amd, diff --git a/arch/x86/kernel/cpu/microcode/core.c b/arch/x86/kernel/cpu/microcode/core.c index ad57e0e4d674..6a41cee242f6 100644 --- a/arch/x86/kernel/cpu/microcode/core.c +++ b/arch/x86/kernel/cpu/microcode/core.c @@ -491,7 +491,7 @@ wait_for_siblings: */ static int microcode_reload_late(void) { - int ret; + int old = boot_cpu_data.microcode, ret; pr_err("Attempting late microcode loading - it is dangerous and taints the kernel.\n"); pr_err("You should switch to early loading, if possible.\n"); @@ -503,7 +503,8 @@ static int microcode_reload_late(void) if (ret == 0) microcode_check(); - pr_info("Reload completed, microcode revision: 0x%x\n", boot_cpu_data.microcode); + pr_info("Reload completed, microcode revision: 0x%x -> 0x%x\n", + old, boot_cpu_data.microcode); return ret; } diff --git a/arch/x86/kernel/cpu/microcode/intel.c b/arch/x86/kernel/cpu/microcode/intel.c index 025c8f0cd948..1fcbd671f1df 100644 --- a/arch/x86/kernel/cpu/microcode/intel.c +++ b/arch/x86/kernel/cpu/microcode/intel.c @@ -916,24 +916,7 @@ static enum ucode_state request_microcode_fw(int cpu, struct device *device, return ret; } -static enum ucode_state -request_microcode_user(int cpu, const void __user *buf, size_t size) -{ - struct iov_iter iter; - struct iovec iov; - - if (is_blacklisted(cpu)) - return UCODE_NFOUND; - - iov.iov_base = (void __user *)buf; - iov.iov_len = size; - iov_iter_init(&iter, WRITE, &iov, 1, size); - - return generic_load_microcode(cpu, &iter); -} - static struct microcode_ops microcode_intel_ops = { - .request_microcode_user = request_microcode_user, .request_microcode_fw = request_microcode_fw, .collect_cpu_info = collect_cpu_info, .apply_microcode = apply_microcode_intel, diff --git a/arch/x86/kernel/cpu/resctrl/core.c b/arch/x86/kernel/cpu/resctrl/core.c index bb1c3f5f60c8..de62b0b87ced 100644 --- a/arch/x86/kernel/cpu/resctrl/core.c +++ b/arch/x86/kernel/cpu/resctrl/core.c @@ -147,7 +147,6 @@ static inline void cache_alloc_hsw_probe(void) r->cache.shareable_bits = 0xc0000; r->cache.min_cbm_bits = 2; r->alloc_capable = true; - r->alloc_enabled = true; rdt_alloc_capable = true; } @@ -211,7 +210,6 @@ static bool __get_mem_config_intel(struct rdt_resource *r) thread_throttle_mode_init(); r->alloc_capable = true; - r->alloc_enabled = true; return true; } @@ -242,7 +240,6 @@ static bool __rdt_get_mem_config_amd(struct rdt_resource *r) r->data_width = 4; r->alloc_capable = true; - r->alloc_enabled = true; return true; } @@ -261,7 +258,6 @@ static void rdt_get_cache_alloc_cfg(int idx, struct rdt_resource *r) r->cache.shareable_bits = ebx & r->default_ctrl; r->data_width = (r->cache.cbm_len + 3) / 4; r->alloc_capable = true; - r->alloc_enabled = true; } static void rdt_get_cdp_config(int level) @@ -300,7 +296,7 @@ mba_wrmsr_amd(struct rdt_domain *d, struct msr_param *m, struct rdt_resource *r) * that can be written to QOS_MSRs. * There are currently no SKUs which support non linear delay values. */ -u32 delay_bw_map(unsigned long bw, struct rdt_resource *r) +static u32 delay_bw_map(unsigned long bw, struct rdt_resource *r) { if (r->membw.delay_linear) return MAX_MBA_BW - bw; @@ -401,7 +397,7 @@ struct rdt_domain *rdt_find_domain(struct rdt_resource *r, int id, return NULL; } -void setup_default_ctrlval(struct rdt_resource *r, u32 *dc, u32 *dm) +static void setup_default_ctrlval(struct rdt_resource *r, u32 *dc) { struct rdt_hw_resource *hw_res = resctrl_to_arch_res(r); int i; @@ -410,12 +406,17 @@ void setup_default_ctrlval(struct rdt_resource *r, u32 *dc, u32 *dm) * Initialize the Control MSRs to having no control. * For Cache Allocation: Set all bits in cbm * For Memory Allocation: Set b/w requested to 100% - * and the bandwidth in MBps to U32_MAX */ - for (i = 0; i < hw_res->num_closid; i++, dc++, dm++) { + for (i = 0; i < hw_res->num_closid; i++, dc++) *dc = r->default_ctrl; - *dm = MBA_MAX_MBPS; - } +} + +static void domain_free(struct rdt_hw_domain *hw_dom) +{ + kfree(hw_dom->arch_mbm_total); + kfree(hw_dom->arch_mbm_local); + kfree(hw_dom->ctrl_val); + kfree(hw_dom); } static int domain_setup_ctrlval(struct rdt_resource *r, struct rdt_domain *d) @@ -423,23 +424,15 @@ static int domain_setup_ctrlval(struct rdt_resource *r, struct rdt_domain *d) struct rdt_hw_resource *hw_res = resctrl_to_arch_res(r); struct rdt_hw_domain *hw_dom = resctrl_to_arch_dom(d); struct msr_param m; - u32 *dc, *dm; + u32 *dc; dc = kmalloc_array(hw_res->num_closid, sizeof(*hw_dom->ctrl_val), GFP_KERNEL); if (!dc) return -ENOMEM; - dm = kmalloc_array(hw_res->num_closid, sizeof(*hw_dom->mbps_val), - GFP_KERNEL); - if (!dm) { - kfree(dc); - return -ENOMEM; - } - hw_dom->ctrl_val = dc; - hw_dom->mbps_val = dm; - setup_default_ctrlval(r, dc, dm); + setup_default_ctrlval(r, dc); m.low = 0; m.high = hw_res->num_closid; @@ -447,39 +440,31 @@ static int domain_setup_ctrlval(struct rdt_resource *r, struct rdt_domain *d) return 0; } -static int domain_setup_mon_state(struct rdt_resource *r, struct rdt_domain *d) +/** + * arch_domain_mbm_alloc() - Allocate arch private storage for the MBM counters + * @num_rmid: The size of the MBM counter array + * @hw_dom: The domain that owns the allocated arrays + */ +static int arch_domain_mbm_alloc(u32 num_rmid, struct rdt_hw_domain *hw_dom) { size_t tsize; - if (is_llc_occupancy_enabled()) { - d->rmid_busy_llc = bitmap_zalloc(r->num_rmid, GFP_KERNEL); - if (!d->rmid_busy_llc) - return -ENOMEM; - INIT_DELAYED_WORK(&d->cqm_limbo, cqm_handle_limbo); - } if (is_mbm_total_enabled()) { - tsize = sizeof(*d->mbm_total); - d->mbm_total = kcalloc(r->num_rmid, tsize, GFP_KERNEL); - if (!d->mbm_total) { - bitmap_free(d->rmid_busy_llc); + tsize = sizeof(*hw_dom->arch_mbm_total); + hw_dom->arch_mbm_total = kcalloc(num_rmid, tsize, GFP_KERNEL); + if (!hw_dom->arch_mbm_total) return -ENOMEM; - } } if (is_mbm_local_enabled()) { - tsize = sizeof(*d->mbm_local); - d->mbm_local = kcalloc(r->num_rmid, tsize, GFP_KERNEL); - if (!d->mbm_local) { - bitmap_free(d->rmid_busy_llc); - kfree(d->mbm_total); + tsize = sizeof(*hw_dom->arch_mbm_local); + hw_dom->arch_mbm_local = kcalloc(num_rmid, tsize, GFP_KERNEL); + if (!hw_dom->arch_mbm_local) { + kfree(hw_dom->arch_mbm_total); + hw_dom->arch_mbm_total = NULL; return -ENOMEM; } } - if (is_mbm_enabled()) { - INIT_DELAYED_WORK(&d->mbm_over, mbm_handle_overflow); - mbm_setup_overflow_handler(d, MBM_OVERFLOW_INTERVAL); - } - return 0; } @@ -502,6 +487,7 @@ static void domain_add_cpu(int cpu, struct rdt_resource *r) struct list_head *add_pos = NULL; struct rdt_hw_domain *hw_dom; struct rdt_domain *d; + int err; d = rdt_find_domain(r, id, &add_pos); if (IS_ERR(d)) { @@ -527,25 +513,22 @@ static void domain_add_cpu(int cpu, struct rdt_resource *r) rdt_domain_reconfigure_cdp(r); if (r->alloc_capable && domain_setup_ctrlval(r, d)) { - kfree(hw_dom); + domain_free(hw_dom); return; } - if (r->mon_capable && domain_setup_mon_state(r, d)) { - kfree(hw_dom->ctrl_val); - kfree(hw_dom->mbps_val); - kfree(hw_dom); + if (r->mon_capable && arch_domain_mbm_alloc(r->num_rmid, hw_dom)) { + domain_free(hw_dom); return; } list_add_tail(&d->list, add_pos); - /* - * If resctrl is mounted, add - * per domain monitor data directories. - */ - if (static_branch_unlikely(&rdt_mon_enable_key)) - mkdir_mondata_subdir_allrdtgrp(r, d); + err = resctrl_online_domain(r, d); + if (err) { + list_del(&d->list); + domain_free(hw_dom); + } } static void domain_remove_cpu(int cpu, struct rdt_resource *r) @@ -563,27 +546,8 @@ static void domain_remove_cpu(int cpu, struct rdt_resource *r) cpumask_clear_cpu(cpu, &d->cpu_mask); if (cpumask_empty(&d->cpu_mask)) { - /* - * If resctrl is mounted, remove all the - * per domain monitor data directories. - */ - if (static_branch_unlikely(&rdt_mon_enable_key)) - rmdir_mondata_subdir_allrdtgrp(r, d->id); + resctrl_offline_domain(r, d); list_del(&d->list); - if (r->mon_capable && is_mbm_enabled()) - cancel_delayed_work(&d->mbm_over); - if (is_llc_occupancy_enabled() && has_busy_rmid(r, d)) { - /* - * When a package is going down, forcefully - * decrement rmid->ebusy. There is no way to know - * that the L3 was flushed and hence may lead to - * incorrect counts in rare scenarios, but leaving - * the RMID as busy creates RMID leaks if the - * package never comes back. - */ - __check_limbo(d, true); - cancel_delayed_work(&d->cqm_limbo); - } /* * rdt_domain "d" is going to be freed below, so clear @@ -591,13 +555,8 @@ static void domain_remove_cpu(int cpu, struct rdt_resource *r) */ if (d->plr) d->plr->d = NULL; + domain_free(hw_dom); - kfree(hw_dom->ctrl_val); - kfree(hw_dom->mbps_val); - bitmap_free(d->rmid_busy_llc); - kfree(d->mbm_total); - kfree(d->mbm_local); - kfree(hw_dom); return; } diff --git a/arch/x86/kernel/cpu/resctrl/ctrlmondata.c b/arch/x86/kernel/cpu/resctrl/ctrlmondata.c index 87666275eed9..1dafbdc5ac31 100644 --- a/arch/x86/kernel/cpu/resctrl/ctrlmondata.c +++ b/arch/x86/kernel/cpu/resctrl/ctrlmondata.c @@ -61,6 +61,7 @@ int parse_bw(struct rdt_parse_data *data, struct resctrl_schema *s, struct rdt_domain *d) { struct resctrl_staged_config *cfg; + u32 closid = data->rdtgrp->closid; struct rdt_resource *r = s->res; unsigned long bw_val; @@ -72,6 +73,12 @@ int parse_bw(struct rdt_parse_data *data, struct resctrl_schema *s, if (!bw_validate(data->buf, &bw_val, r)) return -EINVAL; + + if (is_mba_sc(r)) { + d->mbps_val[closid] = bw_val; + return 0; + } + cfg->new_ctrl = bw_val; cfg->have_new_ctrl = true; @@ -261,14 +268,13 @@ static u32 get_config_index(u32 closid, enum resctrl_conf_type type) static bool apply_config(struct rdt_hw_domain *hw_dom, struct resctrl_staged_config *cfg, u32 idx, - cpumask_var_t cpu_mask, bool mba_sc) + cpumask_var_t cpu_mask) { struct rdt_domain *dom = &hw_dom->d_resctrl; - u32 *dc = !mba_sc ? hw_dom->ctrl_val : hw_dom->mbps_val; - if (cfg->new_ctrl != dc[idx]) { + if (cfg->new_ctrl != hw_dom->ctrl_val[idx]) { cpumask_set_cpu(cpumask_any(&dom->cpu_mask), cpu_mask); - dc[idx] = cfg->new_ctrl; + hw_dom->ctrl_val[idx] = cfg->new_ctrl; return true; } @@ -276,6 +282,27 @@ static bool apply_config(struct rdt_hw_domain *hw_dom, return false; } +int resctrl_arch_update_one(struct rdt_resource *r, struct rdt_domain *d, + u32 closid, enum resctrl_conf_type t, u32 cfg_val) +{ + struct rdt_hw_resource *hw_res = resctrl_to_arch_res(r); + struct rdt_hw_domain *hw_dom = resctrl_to_arch_dom(d); + u32 idx = get_config_index(closid, t); + struct msr_param msr_param; + + if (!cpumask_test_cpu(smp_processor_id(), &d->cpu_mask)) + return -EINVAL; + + hw_dom->ctrl_val[idx] = cfg_val; + + msr_param.res = r; + msr_param.low = idx; + msr_param.high = idx + 1; + hw_res->msr_update(d, &msr_param, r); + + return 0; +} + int resctrl_arch_update_domains(struct rdt_resource *r, u32 closid) { struct resctrl_staged_config *cfg; @@ -284,14 +311,12 @@ int resctrl_arch_update_domains(struct rdt_resource *r, u32 closid) enum resctrl_conf_type t; cpumask_var_t cpu_mask; struct rdt_domain *d; - bool mba_sc; int cpu; u32 idx; if (!zalloc_cpumask_var(&cpu_mask, GFP_KERNEL)) return -ENOMEM; - mba_sc = is_mba_sc(r); msr_param.res = NULL; list_for_each_entry(d, &r->domains, list) { hw_dom = resctrl_to_arch_dom(d); @@ -301,7 +326,7 @@ int resctrl_arch_update_domains(struct rdt_resource *r, u32 closid) continue; idx = get_config_index(closid, t); - if (!apply_config(hw_dom, cfg, idx, cpu_mask, mba_sc)) + if (!apply_config(hw_dom, cfg, idx, cpu_mask)) continue; if (!msr_param.res) { @@ -315,11 +340,7 @@ int resctrl_arch_update_domains(struct rdt_resource *r, u32 closid) } } - /* - * Avoid writing the control msr with control values when - * MBA software controller is enabled - */ - if (cpumask_empty(cpu_mask) || mba_sc) + if (cpumask_empty(cpu_mask)) goto done; cpu = get_cpu(); /* Update resource control msr on this CPU if it's in cpu_mask. */ @@ -406,6 +427,14 @@ ssize_t rdtgroup_schemata_write(struct kernfs_open_file *of, list_for_each_entry(s, &resctrl_schema_all, list) { r = s->res; + + /* + * Writes to mba_sc resources update the software controller, + * not the control MSR. + */ + if (is_mba_sc(r)) + continue; + ret = resctrl_arch_update_domains(r, rdtgrp->closid); if (ret) goto out; @@ -433,9 +462,7 @@ u32 resctrl_arch_get_config(struct rdt_resource *r, struct rdt_domain *d, struct rdt_hw_domain *hw_dom = resctrl_to_arch_dom(d); u32 idx = get_config_index(closid, type); - if (!is_mba_sc(r)) - return hw_dom->ctrl_val[idx]; - return hw_dom->mbps_val[idx]; + return hw_dom->ctrl_val[idx]; } static void show_doms(struct seq_file *s, struct resctrl_schema *schema, int closid) @@ -450,8 +477,12 @@ static void show_doms(struct seq_file *s, struct resctrl_schema *schema, int clo if (sep) seq_puts(s, ";"); - ctrl_val = resctrl_arch_get_config(r, dom, closid, - schema->conf_type); + if (is_mba_sc(r)) + ctrl_val = dom->mbps_val[closid]; + else + ctrl_val = resctrl_arch_get_config(r, dom, closid, + schema->conf_type); + seq_printf(s, r->format_str, dom->id, max_data_width, ctrl_val); sep = true; @@ -518,7 +549,6 @@ void mon_event_read(struct rmid_read *rr, struct rdt_resource *r, int rdtgroup_mondata_show(struct seq_file *m, void *arg) { struct kernfs_open_file *of = m->private; - struct rdt_hw_resource *hw_res; u32 resid, evtid, domid; struct rdtgroup *rdtgrp; struct rdt_resource *r; @@ -538,8 +568,7 @@ int rdtgroup_mondata_show(struct seq_file *m, void *arg) domid = md.u.domid; evtid = md.u.evtid; - hw_res = &rdt_resources_all[resid]; - r = &hw_res->r_resctrl; + r = &rdt_resources_all[resid].r_resctrl; d = rdt_find_domain(r, domid, NULL); if (IS_ERR_OR_NULL(d)) { ret = -ENOENT; @@ -548,12 +577,12 @@ int rdtgroup_mondata_show(struct seq_file *m, void *arg) mon_event_read(&rr, r, d, rdtgrp, evtid, false); - if (rr.val & RMID_VAL_ERROR) + if (rr.err == -EIO) seq_puts(m, "Error\n"); - else if (rr.val & RMID_VAL_UNAVAIL) + else if (rr.err == -EINVAL) seq_puts(m, "Unavailable\n"); else - seq_printf(m, "%llu\n", rr.val * hw_res->mon_scale); + seq_printf(m, "%llu\n", rr.val); out: rdtgroup_kn_unlock(of->kn); diff --git a/arch/x86/kernel/cpu/resctrl/internal.h b/arch/x86/kernel/cpu/resctrl/internal.h index 1d647188a43b..5f7128686cfd 100644 --- a/arch/x86/kernel/cpu/resctrl/internal.h +++ b/arch/x86/kernel/cpu/resctrl/internal.h @@ -22,21 +22,12 @@ #define L2_QOS_CDP_ENABLE 0x01ULL -/* - * Event IDs are used to program IA32_QM_EVTSEL before reading event - * counter from IA32_QM_CTR - */ -#define QOS_L3_OCCUP_EVENT_ID 0x01 -#define QOS_L3_MBM_TOTAL_EVENT_ID 0x02 -#define QOS_L3_MBM_LOCAL_EVENT_ID 0x03 - #define CQM_LIMBOCHECK_INTERVAL 1000 #define MBM_CNTR_WIDTH_BASE 24 #define MBM_OVERFLOW_INTERVAL 1000 #define MAX_MBA_BW 100u #define MBA_IS_LINEAR 0x4 -#define MBA_MAX_MBPS U32_MAX #define MAX_MBA_BW_AMD 0x800 #define MBM_CNTR_WIDTH_OFFSET_AMD 20 @@ -74,7 +65,7 @@ DECLARE_STATIC_KEY_FALSE(rdt_mon_enable_key); * @list: entry in &rdt_resource->evt_list */ struct mon_evt { - u32 evtid; + enum resctrl_event_id evtid; char *name; struct list_head list; }; @@ -91,9 +82,9 @@ struct mon_evt { union mon_data_bits { void *priv; struct { - unsigned int rid : 10; - unsigned int evtid : 8; - unsigned int domid : 14; + unsigned int rid : 10; + enum resctrl_event_id evtid : 8; + unsigned int domid : 14; } u; }; @@ -101,12 +92,12 @@ struct rmid_read { struct rdtgroup *rgrp; struct rdt_resource *r; struct rdt_domain *d; - int evtid; + enum resctrl_event_id evtid; bool first; + int err; u64 val; }; -extern unsigned int resctrl_cqm_threshold; extern bool rdt_alloc_capable; extern bool rdt_mon_capable; extern unsigned int rdt_mon_features; @@ -288,35 +279,45 @@ struct rftype { /** * struct mbm_state - status for each MBM counter in each domain - * @chunks: Total data moved (multiply by rdt_group.mon_scale to get bytes) - * @prev_msr: Value of IA32_QM_CTR for this RMID last time we read it - * @prev_bw_msr:Value of previous IA32_QM_CTR for bandwidth counting + * @prev_bw_bytes: Previous bytes value read for bandwidth calculation * @prev_bw: The most recent bandwidth in MBps * @delta_bw: Difference between the current and previous bandwidth * @delta_comp: Indicates whether to compute the delta_bw */ struct mbm_state { - u64 chunks; - u64 prev_msr; - u64 prev_bw_msr; + u64 prev_bw_bytes; u32 prev_bw; u32 delta_bw; bool delta_comp; }; /** + * struct arch_mbm_state - values used to compute resctrl_arch_rmid_read()s + * return value. + * @chunks: Total data moved (multiply by rdt_group.mon_scale to get bytes) + * @prev_msr: Value of IA32_QM_CTR last time it was read for the RMID used to + * find this struct. + */ +struct arch_mbm_state { + u64 chunks; + u64 prev_msr; +}; + +/** * struct rdt_hw_domain - Arch private attributes of a set of CPUs that share * a resource * @d_resctrl: Properties exposed to the resctrl file system * @ctrl_val: array of cache or mem ctrl values (indexed by CLOSID) - * @mbps_val: When mba_sc is enabled, this holds the bandwidth in MBps + * @arch_mbm_total: arch private state for MBM total bandwidth + * @arch_mbm_local: arch private state for MBM local bandwidth * * Members of this structure are accessed via helpers that provide abstraction. */ struct rdt_hw_domain { struct rdt_domain d_resctrl; u32 *ctrl_val; - u32 *mbps_val; + struct arch_mbm_state *arch_mbm_total; + struct arch_mbm_state *arch_mbm_local; }; static inline struct rdt_hw_domain *resctrl_to_arch_dom(struct rdt_domain *r) @@ -459,14 +460,6 @@ int resctrl_arch_set_cdp_enabled(enum resctrl_res_level l, bool enable); for_each_rdt_resource(r) \ if (r->mon_capable) -#define for_each_alloc_enabled_rdt_resource(r) \ - for_each_rdt_resource(r) \ - if (r->alloc_enabled) - -#define for_each_mon_enabled_rdt_resource(r) \ - for_each_rdt_resource(r) \ - if (r->mon_enabled) - /* CPUID.(EAX=10H, ECX=ResID=1).EAX */ union cpuid_0x10_1_eax { struct { @@ -530,10 +523,6 @@ void free_rmid(u32 rmid); int rdt_get_mon_l3_config(struct rdt_resource *r); void mon_event_count(void *info); int rdtgroup_mondata_show(struct seq_file *m, void *arg); -void rmdir_mondata_subdir_allrdtgrp(struct rdt_resource *r, - unsigned int dom_id); -void mkdir_mondata_subdir_allrdtgrp(struct rdt_resource *r, - struct rdt_domain *d); void mon_event_read(struct rmid_read *rr, struct rdt_resource *r, struct rdt_domain *d, struct rdtgroup *rdtgrp, int evtid, int first); @@ -542,8 +531,6 @@ void mbm_setup_overflow_handler(struct rdt_domain *dom, void mbm_handle_overflow(struct work_struct *work); void __init intel_rdt_mbm_apply_quirk(void); bool is_mba_sc(struct rdt_resource *r); -void setup_default_ctrlval(struct rdt_resource *r, u32 *dc, u32 *dm); -u32 delay_bw_map(unsigned long bw, struct rdt_resource *r); void cqm_setup_limbo_handler(struct rdt_domain *dom, unsigned long delay_ms); void cqm_handle_limbo(struct work_struct *work); bool has_busy_rmid(struct rdt_resource *r, struct rdt_domain *d); diff --git a/arch/x86/kernel/cpu/resctrl/monitor.c b/arch/x86/kernel/cpu/resctrl/monitor.c index eaf25a234ff5..efe0c30d3a12 100644 --- a/arch/x86/kernel/cpu/resctrl/monitor.c +++ b/arch/x86/kernel/cpu/resctrl/monitor.c @@ -16,8 +16,12 @@ */ #include <linux/module.h> +#include <linux/sizes.h> #include <linux/slab.h> + #include <asm/cpu_device_id.h> +#include <asm/resctrl.h> + #include "internal.h" struct rmid_entry { @@ -37,8 +41,8 @@ static LIST_HEAD(rmid_free_lru); * @rmid_limbo_count count of currently unused but (potentially) * dirty RMIDs. * This counts RMIDs that no one is currently using but that - * may have a occupancy value > intel_cqm_threshold. User can change - * the threshold occupancy value. + * may have a occupancy value > resctrl_rmid_realloc_threshold. User can + * change the threshold occupancy value. */ static unsigned int rmid_limbo_count; @@ -59,10 +63,15 @@ bool rdt_mon_capable; unsigned int rdt_mon_features; /* - * This is the threshold cache occupancy at which we will consider an + * This is the threshold cache occupancy in bytes at which we will consider an * RMID available for re-allocation. */ -unsigned int resctrl_cqm_threshold; +unsigned int resctrl_rmid_realloc_threshold; + +/* + * This is the maximum value for the reallocation threshold, in bytes. + */ +unsigned int resctrl_rmid_realloc_limit; #define CF(cf) ((unsigned long)(1048576 * (cf) + 0.5)) @@ -137,9 +146,54 @@ static inline struct rmid_entry *__rmid_entry(u32 rmid) return entry; } -static u64 __rmid_read(u32 rmid, u32 eventid) +static struct arch_mbm_state *get_arch_mbm_state(struct rdt_hw_domain *hw_dom, + u32 rmid, + enum resctrl_event_id eventid) { - u64 val; + switch (eventid) { + case QOS_L3_OCCUP_EVENT_ID: + return NULL; + case QOS_L3_MBM_TOTAL_EVENT_ID: + return &hw_dom->arch_mbm_total[rmid]; + case QOS_L3_MBM_LOCAL_EVENT_ID: + return &hw_dom->arch_mbm_local[rmid]; + } + + /* Never expect to get here */ + WARN_ON_ONCE(1); + + return NULL; +} + +void resctrl_arch_reset_rmid(struct rdt_resource *r, struct rdt_domain *d, + u32 rmid, enum resctrl_event_id eventid) +{ + struct rdt_hw_domain *hw_dom = resctrl_to_arch_dom(d); + struct arch_mbm_state *am; + + am = get_arch_mbm_state(hw_dom, rmid, eventid); + if (am) + memset(am, 0, sizeof(*am)); +} + +static u64 mbm_overflow_count(u64 prev_msr, u64 cur_msr, unsigned int width) +{ + u64 shift = 64 - width, chunks; + + chunks = (cur_msr << shift) - (prev_msr << shift); + return chunks >> shift; +} + +int resctrl_arch_rmid_read(struct rdt_resource *r, struct rdt_domain *d, + u32 rmid, enum resctrl_event_id eventid, u64 *val) +{ + struct rdt_hw_resource *hw_res = resctrl_to_arch_res(r); + struct rdt_hw_domain *hw_dom = resctrl_to_arch_dom(d); + struct arch_mbm_state *am; + u64 msr_val, chunks; + + if (!cpumask_test_cpu(smp_processor_id(), &d->cpu_mask)) + return -EINVAL; /* * As per the SDM, when IA32_QM_EVTSEL.EvtID (bits 7:0) is configured @@ -150,16 +204,26 @@ static u64 __rmid_read(u32 rmid, u32 eventid) * are error bits. */ wrmsr(MSR_IA32_QM_EVTSEL, eventid, rmid); - rdmsrl(MSR_IA32_QM_CTR, val); - - return val; -} + rdmsrl(MSR_IA32_QM_CTR, msr_val); + + if (msr_val & RMID_VAL_ERROR) + return -EIO; + if (msr_val & RMID_VAL_UNAVAIL) + return -EINVAL; + + am = get_arch_mbm_state(hw_dom, rmid, eventid); + if (am) { + am->chunks += mbm_overflow_count(am->prev_msr, msr_val, + hw_res->mbm_width); + chunks = get_corrected_mbm_count(rmid, am->chunks); + am->prev_msr = msr_val; + } else { + chunks = msr_val; + } -static bool rmid_dirty(struct rmid_entry *entry) -{ - u64 val = __rmid_read(entry->rmid, QOS_L3_OCCUP_EVENT_ID); + *val = chunks * hw_res->mon_scale; - return val >= resctrl_cqm_threshold; + return 0; } /* @@ -170,11 +234,11 @@ static bool rmid_dirty(struct rmid_entry *entry) */ void __check_limbo(struct rdt_domain *d, bool force_free) { + struct rdt_resource *r = &rdt_resources_all[RDT_RESOURCE_L3].r_resctrl; struct rmid_entry *entry; - struct rdt_resource *r; u32 crmid = 1, nrmid; - - r = &rdt_resources_all[RDT_RESOURCE_L3].r_resctrl; + bool rmid_dirty; + u64 val = 0; /* * Skip RMID 0 and start from RMID 1 and check all the RMIDs that @@ -188,7 +252,15 @@ void __check_limbo(struct rdt_domain *d, bool force_free) break; entry = __rmid_entry(nrmid); - if (force_free || !rmid_dirty(entry)) { + + if (resctrl_arch_rmid_read(r, d, entry->rmid, + QOS_L3_OCCUP_EVENT_ID, &val)) { + rmid_dirty = true; + } else { + rmid_dirty = (val >= resctrl_rmid_realloc_threshold); + } + + if (force_free || !rmid_dirty) { clear_bit(entry->rmid, d->rmid_busy_llc); if (!--entry->busy) { rmid_limbo_count--; @@ -227,19 +299,19 @@ int alloc_rmid(void) static void add_rmid_to_limbo(struct rmid_entry *entry) { - struct rdt_resource *r; + struct rdt_resource *r = &rdt_resources_all[RDT_RESOURCE_L3].r_resctrl; struct rdt_domain *d; - int cpu; - u64 val; - - r = &rdt_resources_all[RDT_RESOURCE_L3].r_resctrl; + int cpu, err; + u64 val = 0; entry->busy = 0; cpu = get_cpu(); list_for_each_entry(d, &r->domains, list) { if (cpumask_test_cpu(cpu, &d->cpu_mask)) { - val = __rmid_read(entry->rmid, QOS_L3_OCCUP_EVENT_ID); - if (val <= resctrl_cqm_threshold) + err = resctrl_arch_rmid_read(r, d, entry->rmid, + QOS_L3_OCCUP_EVENT_ID, + &val); + if (err || val <= resctrl_rmid_realloc_threshold) continue; } @@ -277,24 +349,18 @@ void free_rmid(u32 rmid) list_add_tail(&entry->list, &rmid_free_lru); } -static u64 mbm_overflow_count(u64 prev_msr, u64 cur_msr, unsigned int width) +static int __mon_event_count(u32 rmid, struct rmid_read *rr) { - u64 shift = 64 - width, chunks; + struct mbm_state *m; + u64 tval = 0; - chunks = (cur_msr << shift) - (prev_msr << shift); - return chunks >> shift; -} + if (rr->first) + resctrl_arch_reset_rmid(rr->r, rr->d, rmid, rr->evtid); -static u64 __mon_event_count(u32 rmid, struct rmid_read *rr) -{ - struct rdt_hw_resource *hw_res = resctrl_to_arch_res(rr->r); - struct mbm_state *m; - u64 chunks, tval; + rr->err = resctrl_arch_rmid_read(rr->r, rr->d, rmid, rr->evtid, &tval); + if (rr->err) + return rr->err; - tval = __rmid_read(rmid, rr->evtid); - if (tval & (RMID_VAL_ERROR | RMID_VAL_UNAVAIL)) { - return tval; - } switch (rr->evtid) { case QOS_L3_OCCUP_EVENT_ID: rr->val += tval; @@ -308,48 +374,47 @@ static u64 __mon_event_count(u32 rmid, struct rmid_read *rr) default: /* * Code would never reach here because an invalid - * event id would fail the __rmid_read. + * event id would fail in resctrl_arch_rmid_read(). */ - return RMID_VAL_ERROR; + return -EINVAL; } if (rr->first) { memset(m, 0, sizeof(struct mbm_state)); - m->prev_bw_msr = m->prev_msr = tval; return 0; } - chunks = mbm_overflow_count(m->prev_msr, tval, hw_res->mbm_width); - m->chunks += chunks; - m->prev_msr = tval; - - rr->val += get_corrected_mbm_count(rmid, m->chunks); + rr->val += tval; return 0; } /* + * mbm_bw_count() - Update bw count from values previously read by + * __mon_event_count(). + * @rmid: The rmid used to identify the cached mbm_state. + * @rr: The struct rmid_read populated by __mon_event_count(). + * * Supporting function to calculate the memory bandwidth - * and delta bandwidth in MBps. + * and delta bandwidth in MBps. The chunks value previously read by + * __mon_event_count() is compared with the chunks value from the previous + * invocation. This must be called once per second to maintain values in MBps. */ static void mbm_bw_count(u32 rmid, struct rmid_read *rr) { - struct rdt_hw_resource *hw_res = resctrl_to_arch_res(rr->r); struct mbm_state *m = &rr->d->mbm_local[rmid]; - u64 tval, cur_bw, chunks; + u64 cur_bw, bytes, cur_bytes; - tval = __rmid_read(rmid, rr->evtid); - if (tval & (RMID_VAL_ERROR | RMID_VAL_UNAVAIL)) - return; + cur_bytes = rr->val; + bytes = cur_bytes - m->prev_bw_bytes; + m->prev_bw_bytes = cur_bytes; - chunks = mbm_overflow_count(m->prev_bw_msr, tval, hw_res->mbm_width); - cur_bw = (get_corrected_mbm_count(rmid, chunks) * hw_res->mon_scale) >> 20; + cur_bw = bytes / SZ_1M; if (m->delta_comp) m->delta_bw = abs(cur_bw - m->prev_bw); m->delta_comp = false; m->prev_bw = cur_bw; - m->prev_bw_msr = tval; } /* @@ -361,11 +426,11 @@ void mon_event_count(void *info) struct rdtgroup *rdtgrp, *entry; struct rmid_read *rr = info; struct list_head *head; - u64 ret_val; + int ret; rdtgrp = rr->rgrp; - ret_val = __mon_event_count(rdtgrp->mon.rmid, rr); + ret = __mon_event_count(rdtgrp->mon.rmid, rr); /* * For Ctrl groups read data from child monitor groups and @@ -377,13 +442,17 @@ void mon_event_count(void *info) if (rdtgrp->type == RDTCTRL_GROUP) { list_for_each_entry(entry, head, mon.crdtgrp_list) { if (__mon_event_count(entry->mon.rmid, rr) == 0) - ret_val = 0; + ret = 0; } } - /* Report error if none of rmid_reads are successful */ - if (ret_val) - rr->val = ret_val; + /* + * __mon_event_count() calls for newly created monitor groups may + * report -EINVAL/Unavailable if the monitor hasn't seen any traffic. + * Discard error if any of the monitor event reads succeeded. + */ + if (ret == 0) + rr->err = 0; } /* @@ -420,10 +489,8 @@ void mon_event_count(void *info) */ static void update_mba_bw(struct rdtgroup *rgrp, struct rdt_domain *dom_mbm) { - u32 closid, rmid, cur_msr, cur_msr_val, new_msr_val; + u32 closid, rmid, cur_msr_val, new_msr_val; struct mbm_state *pmbm_data, *cmbm_data; - struct rdt_hw_resource *hw_r_mba; - struct rdt_hw_domain *hw_dom_mba; u32 cur_bw, delta_bw, user_bw; struct rdt_resource *r_mba; struct rdt_domain *dom_mba; @@ -433,8 +500,8 @@ static void update_mba_bw(struct rdtgroup *rgrp, struct rdt_domain *dom_mbm) if (!is_mbm_local_enabled()) return; - hw_r_mba = &rdt_resources_all[RDT_RESOURCE_MBA]; - r_mba = &hw_r_mba->r_resctrl; + r_mba = &rdt_resources_all[RDT_RESOURCE_MBA].r_resctrl; + closid = rgrp->closid; rmid = rgrp->mon.rmid; pmbm_data = &dom_mbm->mbm_local[rmid]; @@ -444,16 +511,13 @@ static void update_mba_bw(struct rdtgroup *rgrp, struct rdt_domain *dom_mbm) pr_warn_once("Failure to get domain for MBA update\n"); return; } - hw_dom_mba = resctrl_to_arch_dom(dom_mba); cur_bw = pmbm_data->prev_bw; - user_bw = resctrl_arch_get_config(r_mba, dom_mba, closid, CDP_NONE); + user_bw = dom_mba->mbps_val[closid]; delta_bw = pmbm_data->delta_bw; - /* - * resctrl_arch_get_config() chooses the mbps/ctrl value to return - * based on is_mba_sc(). For now, reach into the hw_dom. - */ - cur_msr_val = hw_dom_mba->ctrl_val[closid]; + + /* MBA resource doesn't support CDP */ + cur_msr_val = resctrl_arch_get_config(r_mba, dom_mba, closid, CDP_NONE); /* * For Ctrl groups read data from child monitor groups. @@ -488,9 +552,7 @@ static void update_mba_bw(struct rdtgroup *rgrp, struct rdt_domain *dom_mbm) return; } - cur_msr = hw_r_mba->msr_base + closid; - wrmsrl(cur_msr, delay_bw_map(new_msr_val, r_mba)); - hw_dom_mba->ctrl_val[closid] = new_msr_val; + resctrl_arch_update_one(r_mba, dom_mba, closid, CDP_NONE, new_msr_val); /* * Delta values are updated dynamically package wise for each @@ -523,10 +585,12 @@ static void mbm_update(struct rdt_resource *r, struct rdt_domain *d, int rmid) */ if (is_mbm_total_enabled()) { rr.evtid = QOS_L3_MBM_TOTAL_EVENT_ID; + rr.val = 0; __mon_event_count(rmid, &rr); } if (is_mbm_local_enabled()) { rr.evtid = QOS_L3_MBM_LOCAL_EVENT_ID; + rr.val = 0; __mon_event_count(rmid, &rr); /* @@ -686,9 +750,10 @@ int rdt_get_mon_l3_config(struct rdt_resource *r) { unsigned int mbm_offset = boot_cpu_data.x86_cache_mbm_width_offset; struct rdt_hw_resource *hw_res = resctrl_to_arch_res(r); - unsigned int cl_size = boot_cpu_data.x86_cache_size; + unsigned int threshold; int ret; + resctrl_rmid_realloc_limit = boot_cpu_data.x86_cache_size * 1024; hw_res->mon_scale = boot_cpu_data.x86_cache_occ_scale; r->num_rmid = boot_cpu_data.x86_cache_max_rmid + 1; hw_res->mbm_width = MBM_CNTR_WIDTH_BASE; @@ -705,10 +770,14 @@ int rdt_get_mon_l3_config(struct rdt_resource *r) * * For a 35MB LLC and 56 RMIDs, this is ~1.8% of the LLC. */ - resctrl_cqm_threshold = cl_size * 1024 / r->num_rmid; + threshold = resctrl_rmid_realloc_limit / r->num_rmid; - /* h/w works in units of "boot_cpu_data.x86_cache_occ_scale" */ - resctrl_cqm_threshold /= hw_res->mon_scale; + /* + * Because num_rmid may not be a power of two, round the value + * to the nearest multiple of hw_res->mon_scale so it matches a + * value the hardware will measure. mon_scale may not be a power of 2. + */ + resctrl_rmid_realloc_threshold = resctrl_arch_round_mon_val(threshold); ret = dom_data_init(r); if (ret) @@ -717,7 +786,6 @@ int rdt_get_mon_l3_config(struct rdt_resource *r) l3_mon_evt_init(r); r->mon_capable = true; - r->mon_enabled = true; return 0; } diff --git a/arch/x86/kernel/cpu/resctrl/pseudo_lock.c b/arch/x86/kernel/cpu/resctrl/pseudo_lock.c index db813f819ad6..d961ae3ed96e 100644 --- a/arch/x86/kernel/cpu/resctrl/pseudo_lock.c +++ b/arch/x86/kernel/cpu/resctrl/pseudo_lock.c @@ -420,6 +420,7 @@ static int pseudo_lock_fn(void *_rdtgrp) struct pseudo_lock_region *plr = rdtgrp->plr; u32 rmid_p, closid_p; unsigned long i; + u64 saved_msr; #ifdef CONFIG_KASAN /* * The registers used for local register variables are also used @@ -463,6 +464,7 @@ static int pseudo_lock_fn(void *_rdtgrp) * the buffer and evict pseudo-locked memory read earlier from the * cache. */ + saved_msr = __rdmsr(MSR_MISC_FEATURE_CONTROL); __wrmsr(MSR_MISC_FEATURE_CONTROL, prefetch_disable_bits, 0x0); closid_p = this_cpu_read(pqr_state.cur_closid); rmid_p = this_cpu_read(pqr_state.cur_rmid); @@ -514,7 +516,7 @@ static int pseudo_lock_fn(void *_rdtgrp) __wrmsr(IA32_PQR_ASSOC, rmid_p, closid_p); /* Re-enable the hardware prefetcher(s) */ - wrmsr(MSR_MISC_FEATURE_CONTROL, 0x0, 0x0); + wrmsrl(MSR_MISC_FEATURE_CONTROL, saved_msr); local_irq_enable(); plr->thread_done = 1; @@ -835,7 +837,7 @@ bool rdtgroup_pseudo_locked_in_hierarchy(struct rdt_domain *d) * First determine which cpus have pseudo-locked regions * associated with them. */ - for_each_alloc_enabled_rdt_resource(r) { + for_each_alloc_capable_rdt_resource(r) { list_for_each_entry(d_i, &r->domains, list) { if (d_i->plr) cpumask_or(cpu_with_psl, cpu_with_psl, @@ -871,6 +873,7 @@ bool rdtgroup_pseudo_locked_in_hierarchy(struct rdt_domain *d) static int measure_cycles_lat_fn(void *_plr) { struct pseudo_lock_region *plr = _plr; + u32 saved_low, saved_high; unsigned long i; u64 start, end; void *mem_r; @@ -879,6 +882,7 @@ static int measure_cycles_lat_fn(void *_plr) /* * Disable hardware prefetchers. */ + rdmsr(MSR_MISC_FEATURE_CONTROL, saved_low, saved_high); wrmsr(MSR_MISC_FEATURE_CONTROL, prefetch_disable_bits, 0x0); mem_r = READ_ONCE(plr->kmem); /* @@ -895,7 +899,7 @@ static int measure_cycles_lat_fn(void *_plr) end = rdtsc_ordered(); trace_pseudo_lock_mem_latency((u32)(end - start)); } - wrmsr(MSR_MISC_FEATURE_CONTROL, 0x0, 0x0); + wrmsr(MSR_MISC_FEATURE_CONTROL, saved_low, saved_high); local_irq_enable(); plr->thread_done = 1; wake_up_interruptible(&plr->lock_thread_wq); @@ -940,6 +944,7 @@ static int measure_residency_fn(struct perf_event_attr *miss_attr, u64 hits_before = 0, hits_after = 0, miss_before = 0, miss_after = 0; struct perf_event *miss_event, *hit_event; int hit_pmcnum, miss_pmcnum; + u32 saved_low, saved_high; unsigned int line_size; unsigned int size; unsigned long i; @@ -973,6 +978,7 @@ static int measure_residency_fn(struct perf_event_attr *miss_attr, /* * Disable hardware prefetchers. */ + rdmsr(MSR_MISC_FEATURE_CONTROL, saved_low, saved_high); wrmsr(MSR_MISC_FEATURE_CONTROL, prefetch_disable_bits, 0x0); /* Initialize rest of local variables */ @@ -1031,7 +1037,7 @@ static int measure_residency_fn(struct perf_event_attr *miss_attr, */ rmb(); /* Re-enable hardware prefetchers */ - wrmsr(MSR_MISC_FEATURE_CONTROL, 0x0, 0x0); + wrmsr(MSR_MISC_FEATURE_CONTROL, saved_low, saved_high); local_irq_enable(); out_hit: perf_event_release_kernel(hit_event); diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c index f276aff521e8..e5a48f05e787 100644 --- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c +++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c @@ -1030,10 +1030,7 @@ static int rdt_delay_linear_show(struct kernfs_open_file *of, static int max_threshold_occ_show(struct kernfs_open_file *of, struct seq_file *seq, void *v) { - struct rdt_resource *r = of->kn->parent->priv; - struct rdt_hw_resource *hw_res = resctrl_to_arch_res(r); - - seq_printf(seq, "%u\n", resctrl_cqm_threshold * hw_res->mon_scale); + seq_printf(seq, "%u\n", resctrl_rmid_realloc_threshold); return 0; } @@ -1055,7 +1052,6 @@ static int rdt_thread_throttle_mode_show(struct kernfs_open_file *of, static ssize_t max_threshold_occ_write(struct kernfs_open_file *of, char *buf, size_t nbytes, loff_t off) { - struct rdt_hw_resource *hw_res; unsigned int bytes; int ret; @@ -1063,11 +1059,10 @@ static ssize_t max_threshold_occ_write(struct kernfs_open_file *of, if (ret) return ret; - if (bytes > (boot_cpu_data.x86_cache_size * 1024)) + if (bytes > resctrl_rmid_realloc_limit) return -EINVAL; - hw_res = resctrl_to_arch_res(of->kn->parent->priv); - resctrl_cqm_threshold = bytes / hw_res->mon_scale; + resctrl_rmid_realloc_threshold = resctrl_arch_round_mon_val(bytes); return nbytes; } @@ -1356,11 +1351,13 @@ static int rdtgroup_size_show(struct kernfs_open_file *of, struct seq_file *s, void *v) { struct resctrl_schema *schema; + enum resctrl_conf_type type; struct rdtgroup *rdtgrp; struct rdt_resource *r; struct rdt_domain *d; unsigned int size; int ret = 0; + u32 closid; bool sep; u32 ctrl; @@ -1386,8 +1383,11 @@ static int rdtgroup_size_show(struct kernfs_open_file *of, goto out; } + closid = rdtgrp->closid; + list_for_each_entry(schema, &resctrl_schema_all, list) { r = schema->res; + type = schema->conf_type; sep = false; seq_printf(s, "%*s:", max_name_width, schema->name); list_for_each_entry(d, &r->domains, list) { @@ -1396,9 +1396,12 @@ static int rdtgroup_size_show(struct kernfs_open_file *of, if (rdtgrp->mode == RDT_MODE_PSEUDO_LOCKSETUP) { size = 0; } else { - ctrl = resctrl_arch_get_config(r, d, - rdtgrp->closid, - schema->conf_type); + if (is_mba_sc(r)) + ctrl = d->mbps_val[closid]; + else + ctrl = resctrl_arch_get_config(r, d, + closid, + type); if (r->rid == RDT_RESOURCE_MBA) size = ctrl; else @@ -1756,7 +1759,7 @@ static int rdtgroup_create_info_dir(struct kernfs_node *parent_kn) if (ret) goto out_destroy; - /* loop over enabled controls, these are all alloc_enabled */ + /* loop over enabled controls, these are all alloc_capable */ list_for_each_entry(s, &resctrl_schema_all, list) { r = s->res; fflags = r->fflags | RF_CTRL_INFO; @@ -1765,7 +1768,7 @@ static int rdtgroup_create_info_dir(struct kernfs_node *parent_kn) goto out_destroy; } - for_each_mon_enabled_rdt_resource(r) { + for_each_mon_capable_rdt_resource(r) { fflags = r->fflags | RF_MON_INFO; sprintf(name, "%s_MON", r->name); ret = rdtgroup_mkdir_info_resdir(r, name, fflags); @@ -1889,26 +1892,61 @@ void rdt_domain_reconfigure_cdp(struct rdt_resource *r) l3_qos_cfg_update(&hw_res->cdp_enabled); } +static int mba_sc_domain_allocate(struct rdt_resource *r, struct rdt_domain *d) +{ + u32 num_closid = resctrl_arch_get_num_closid(r); + int cpu = cpumask_any(&d->cpu_mask); + int i; + + d->mbps_val = kcalloc_node(num_closid, sizeof(*d->mbps_val), + GFP_KERNEL, cpu_to_node(cpu)); + if (!d->mbps_val) + return -ENOMEM; + + for (i = 0; i < num_closid; i++) + d->mbps_val[i] = MBA_MAX_MBPS; + + return 0; +} + +static void mba_sc_domain_destroy(struct rdt_resource *r, + struct rdt_domain *d) +{ + kfree(d->mbps_val); + d->mbps_val = NULL; +} + /* - * Enable or disable the MBA software controller - * which helps user specify bandwidth in MBps. * MBA software controller is supported only if * MBM is supported and MBA is in linear scale. */ +static bool supports_mba_mbps(void) +{ + struct rdt_resource *r = &rdt_resources_all[RDT_RESOURCE_MBA].r_resctrl; + + return (is_mbm_local_enabled() && + r->alloc_capable && is_mba_linear()); +} + +/* + * Enable or disable the MBA software controller + * which helps user specify bandwidth in MBps. + */ static int set_mba_sc(bool mba_sc) { struct rdt_resource *r = &rdt_resources_all[RDT_RESOURCE_MBA].r_resctrl; - struct rdt_hw_domain *hw_dom; + u32 num_closid = resctrl_arch_get_num_closid(r); struct rdt_domain *d; + int i; - if (!is_mbm_enabled() || !is_mba_linear() || - mba_sc == is_mba_sc(r)) + if (!supports_mba_mbps() || mba_sc == is_mba_sc(r)) return -EINVAL; r->membw.mba_sc = mba_sc; + list_for_each_entry(d, &r->domains, list) { - hw_dom = resctrl_to_arch_dom(d); - setup_default_ctrlval(r, hw_dom->ctrl_val, hw_dom->mbps_val); + for (i = 0; i < num_closid; i++) + d->mbps_val[i] = MBA_MAX_MBPS; } return 0; @@ -2106,7 +2144,7 @@ static int schemata_list_create(void) struct rdt_resource *r; int ret = 0; - for_each_alloc_enabled_rdt_resource(r) { + for_each_alloc_capable_rdt_resource(r) { if (resctrl_arch_get_cdp_enabled(r->rid)) { ret = schemata_list_add(r, CDP_CODE); if (ret) @@ -2261,7 +2299,7 @@ static int rdt_parse_param(struct fs_context *fc, struct fs_parameter *param) ctx->enable_cdpl2 = true; return 0; case Opt_mba_mbps: - if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL) + if (!supports_mba_mbps()) return -EINVAL; ctx->enable_mba_mbps = true; return 0; @@ -2452,7 +2490,7 @@ static void rdt_kill_sb(struct super_block *sb) set_mba_sc(false); /*Put everything back to default values. */ - for_each_alloc_enabled_rdt_resource(r) + for_each_alloc_capable_rdt_resource(r) reset_all_ctrls(r); cdp_disable_all(); rmdir_all_sub(); @@ -2499,14 +2537,12 @@ static int mon_addfile(struct kernfs_node *parent_kn, const char *name, * Remove all subdirectories of mon_data of ctrl_mon groups * and monitor groups with given domain id. */ -void rmdir_mondata_subdir_allrdtgrp(struct rdt_resource *r, unsigned int dom_id) +static void rmdir_mondata_subdir_allrdtgrp(struct rdt_resource *r, + unsigned int dom_id) { struct rdtgroup *prgrp, *crgrp; char name[32]; - if (!r->mon_enabled) - return; - list_for_each_entry(prgrp, &rdt_all_groups, rdtgroup_list) { sprintf(name, "mon_%s_%02d", r->name, dom_id); kernfs_remove_by_name(prgrp->mon.mon_data_kn, name); @@ -2565,16 +2601,13 @@ out_destroy: * Add all subdirectories of mon_data for "ctrl_mon" groups * and "monitor" groups with given domain id. */ -void mkdir_mondata_subdir_allrdtgrp(struct rdt_resource *r, - struct rdt_domain *d) +static void mkdir_mondata_subdir_allrdtgrp(struct rdt_resource *r, + struct rdt_domain *d) { struct kernfs_node *parent_kn; struct rdtgroup *prgrp, *crgrp; struct list_head *head; - if (!r->mon_enabled) - return; - list_for_each_entry(prgrp, &rdt_all_groups, rdtgroup_list) { parent_kn = prgrp->mon.mon_data_kn; mkdir_mondata_subdir(parent_kn, d, r, prgrp); @@ -2642,7 +2675,7 @@ static int mkdir_mondata_all(struct kernfs_node *parent_kn, * Create the subdirectories for each domain. Note that all events * in a domain like L3 are grouped into a resource whose domain is L3 */ - for_each_mon_enabled_rdt_resource(r) { + for_each_mon_capable_rdt_resource(r) { ret = mkdir_mondata_subdir_alldom(kn, r, prgrp); if (ret) goto out_destroy; @@ -2786,14 +2819,19 @@ static int rdtgroup_init_cat(struct resctrl_schema *s, u32 closid) } /* Initialize MBA resource with default values. */ -static void rdtgroup_init_mba(struct rdt_resource *r) +static void rdtgroup_init_mba(struct rdt_resource *r, u32 closid) { struct resctrl_staged_config *cfg; struct rdt_domain *d; list_for_each_entry(d, &r->domains, list) { + if (is_mba_sc(r)) { + d->mbps_val[closid] = MBA_MAX_MBPS; + continue; + } + cfg = &d->staged_config[CDP_NONE]; - cfg->new_ctrl = is_mba_sc(r) ? MBA_MAX_MBPS : r->default_ctrl; + cfg->new_ctrl = r->default_ctrl; cfg->have_new_ctrl = true; } } @@ -2808,7 +2846,9 @@ static int rdtgroup_init_alloc(struct rdtgroup *rdtgrp) list_for_each_entry(s, &resctrl_schema_all, list) { r = s->res; if (r->rid == RDT_RESOURCE_MBA) { - rdtgroup_init_mba(r); + rdtgroup_init_mba(r, rdtgrp->closid); + if (is_mba_sc(r)) + continue; } else { ret = rdtgroup_init_cat(s, rdtgrp->closid); if (ret < 0) @@ -3236,6 +3276,110 @@ out: return ret; } +static void domain_destroy_mon_state(struct rdt_domain *d) +{ + bitmap_free(d->rmid_busy_llc); + kfree(d->mbm_total); + kfree(d->mbm_local); +} + +void resctrl_offline_domain(struct rdt_resource *r, struct rdt_domain *d) +{ + lockdep_assert_held(&rdtgroup_mutex); + + if (supports_mba_mbps() && r->rid == RDT_RESOURCE_MBA) + mba_sc_domain_destroy(r, d); + + if (!r->mon_capable) + return; + + /* + * If resctrl is mounted, remove all the + * per domain monitor data directories. + */ + if (static_branch_unlikely(&rdt_mon_enable_key)) + rmdir_mondata_subdir_allrdtgrp(r, d->id); + + if (is_mbm_enabled()) + cancel_delayed_work(&d->mbm_over); + if (is_llc_occupancy_enabled() && has_busy_rmid(r, d)) { + /* + * When a package is going down, forcefully + * decrement rmid->ebusy. There is no way to know + * that the L3 was flushed and hence may lead to + * incorrect counts in rare scenarios, but leaving + * the RMID as busy creates RMID leaks if the + * package never comes back. + */ + __check_limbo(d, true); + cancel_delayed_work(&d->cqm_limbo); + } + + domain_destroy_mon_state(d); +} + +static int domain_setup_mon_state(struct rdt_resource *r, struct rdt_domain *d) +{ + size_t tsize; + + if (is_llc_occupancy_enabled()) { + d->rmid_busy_llc = bitmap_zalloc(r->num_rmid, GFP_KERNEL); + if (!d->rmid_busy_llc) + return -ENOMEM; + } + if (is_mbm_total_enabled()) { + tsize = sizeof(*d->mbm_total); + d->mbm_total = kcalloc(r->num_rmid, tsize, GFP_KERNEL); + if (!d->mbm_total) { + bitmap_free(d->rmid_busy_llc); + return -ENOMEM; + } + } + if (is_mbm_local_enabled()) { + tsize = sizeof(*d->mbm_local); + d->mbm_local = kcalloc(r->num_rmid, tsize, GFP_KERNEL); + if (!d->mbm_local) { + bitmap_free(d->rmid_busy_llc); + kfree(d->mbm_total); + return -ENOMEM; + } + } + + return 0; +} + +int resctrl_online_domain(struct rdt_resource *r, struct rdt_domain *d) +{ + int err; + + lockdep_assert_held(&rdtgroup_mutex); + + if (supports_mba_mbps() && r->rid == RDT_RESOURCE_MBA) + /* RDT_RESOURCE_MBA is never mon_capable */ + return mba_sc_domain_allocate(r, d); + + if (!r->mon_capable) + return 0; + + err = domain_setup_mon_state(r, d); + if (err) + return err; + + if (is_mbm_enabled()) { + INIT_DELAYED_WORK(&d->mbm_over, mbm_handle_overflow); + mbm_setup_overflow_handler(d, MBM_OVERFLOW_INTERVAL); + } + + if (is_llc_occupancy_enabled()) + INIT_DELAYED_WORK(&d->cqm_limbo, cqm_handle_limbo); + + /* If resctrl is mounted, add per domain monitor data directories. */ + if (static_branch_unlikely(&rdt_mon_enable_key)) + mkdir_mondata_subdir_allrdtgrp(r, d); + + return 0; +} + /* * rdtgroup_init - rdtgroup initialization * diff --git a/arch/x86/kernel/cpu/sgx/encl.c b/arch/x86/kernel/cpu/sgx/encl.c index 24c1bb8eb196..1ec20807de1e 100644 --- a/arch/x86/kernel/cpu/sgx/encl.c +++ b/arch/x86/kernel/cpu/sgx/encl.c @@ -12,6 +12,9 @@ #include "encls.h" #include "sgx.h" +static int sgx_encl_lookup_backing(struct sgx_encl *encl, unsigned long page_index, + struct sgx_backing *backing); + #define PCMDS_PER_PAGE (PAGE_SIZE / sizeof(struct sgx_pcmd)) /* * 32 PCMD entries share a PCMD page. PCMD_FIRST_MASK is used to @@ -344,8 +347,11 @@ static vm_fault_t sgx_encl_eaug_page(struct vm_area_struct *vma, } va_page = sgx_encl_grow(encl, false); - if (IS_ERR(va_page)) + if (IS_ERR(va_page)) { + if (PTR_ERR(va_page) == -EBUSY) + vmret = VM_FAULT_NOPAGE; goto err_out_epc; + } if (va_page) list_add(&va_page->list, &encl->va_pages); @@ -906,15 +912,14 @@ const cpumask_t *sgx_encl_cpumask(struct sgx_encl *encl) static struct page *sgx_encl_get_backing_page(struct sgx_encl *encl, pgoff_t index) { - struct inode *inode = encl->backing->f_path.dentry->d_inode; - struct address_space *mapping = inode->i_mapping; + struct address_space *mapping = encl->backing->f_mapping; gfp_t gfpmask = mapping_gfp_mask(mapping); return shmem_read_mapping_page_gfp(mapping, index, gfpmask); } /** - * sgx_encl_get_backing() - Pin the backing storage + * __sgx_encl_get_backing() - Pin the backing storage * @encl: an enclave pointer * @page_index: enclave page index * @backing: data for accessing backing storage for the page @@ -926,7 +931,7 @@ static struct page *sgx_encl_get_backing_page(struct sgx_encl *encl, * 0 on success, * -errno otherwise. */ -static int sgx_encl_get_backing(struct sgx_encl *encl, unsigned long page_index, +static int __sgx_encl_get_backing(struct sgx_encl *encl, unsigned long page_index, struct sgx_backing *backing) { pgoff_t page_pcmd_off = sgx_encl_get_backing_page_pcmd_offset(encl, page_index); @@ -1001,7 +1006,7 @@ static struct mem_cgroup *sgx_encl_get_mem_cgroup(struct sgx_encl *encl) } /** - * sgx_encl_alloc_backing() - allocate a new backing storage page + * sgx_encl_alloc_backing() - create a new backing storage page * @encl: an enclave pointer * @page_index: enclave page index * @backing: data for accessing backing storage for the page @@ -1009,7 +1014,9 @@ static struct mem_cgroup *sgx_encl_get_mem_cgroup(struct sgx_encl *encl) * When called from ksgxd, sets the active memcg from one of the * mms in the enclave's mm_list prior to any backing page allocation, * in order to ensure that shmem page allocations are charged to the - * enclave. + * enclave. Create a backing page for loading data back into an EPC page with + * ELDU. This function takes a reference on a new backing page which + * must be dropped with a corresponding call to sgx_encl_put_backing(). * * Return: * 0 on success, @@ -1022,7 +1029,7 @@ int sgx_encl_alloc_backing(struct sgx_encl *encl, unsigned long page_index, struct mem_cgroup *memcg = set_active_memcg(encl_memcg); int ret; - ret = sgx_encl_get_backing(encl, page_index, backing); + ret = __sgx_encl_get_backing(encl, page_index, backing); set_active_memcg(memcg); mem_cgroup_put(encl_memcg); @@ -1040,15 +1047,17 @@ int sgx_encl_alloc_backing(struct sgx_encl *encl, unsigned long page_index, * It is the caller's responsibility to ensure that it is appropriate to use * sgx_encl_lookup_backing() rather than sgx_encl_alloc_backing(). If lookup is * not used correctly, this will cause an allocation which is not accounted for. + * This function takes a reference on an existing backing page which must be + * dropped with a corresponding call to sgx_encl_put_backing(). * * Return: * 0 on success, * -errno otherwise. */ -int sgx_encl_lookup_backing(struct sgx_encl *encl, unsigned long page_index, +static int sgx_encl_lookup_backing(struct sgx_encl *encl, unsigned long page_index, struct sgx_backing *backing) { - return sgx_encl_get_backing(encl, page_index, backing); + return __sgx_encl_get_backing(encl, page_index, backing); } /** diff --git a/arch/x86/kernel/cpu/sgx/encl.h b/arch/x86/kernel/cpu/sgx/encl.h index a65a952116fd..f94ff14c9486 100644 --- a/arch/x86/kernel/cpu/sgx/encl.h +++ b/arch/x86/kernel/cpu/sgx/encl.h @@ -107,8 +107,6 @@ bool current_is_ksgxd(void); void sgx_encl_release(struct kref *ref); int sgx_encl_mm_add(struct sgx_encl *encl, struct mm_struct *mm); const cpumask_t *sgx_encl_cpumask(struct sgx_encl *encl); -int sgx_encl_lookup_backing(struct sgx_encl *encl, unsigned long page_index, - struct sgx_backing *backing); int sgx_encl_alloc_backing(struct sgx_encl *encl, unsigned long page_index, struct sgx_backing *backing); void sgx_encl_put_backing(struct sgx_backing *backing); diff --git a/arch/x86/kernel/cpu/sgx/main.c b/arch/x86/kernel/cpu/sgx/main.c index 515e2a5f25bb..0aad028f04d4 100644 --- a/arch/x86/kernel/cpu/sgx/main.c +++ b/arch/x86/kernel/cpu/sgx/main.c @@ -49,9 +49,13 @@ static LIST_HEAD(sgx_dirty_page_list); * Reset post-kexec EPC pages to the uninitialized state. The pages are removed * from the input list, and made available for the page allocator. SECS pages * prepending their children in the input list are left intact. + * + * Return 0 when sanitization was successful or kthread was stopped, and the + * number of unsanitized pages otherwise. */ -static void __sgx_sanitize_pages(struct list_head *dirty_page_list) +static unsigned long __sgx_sanitize_pages(struct list_head *dirty_page_list) { + unsigned long left_dirty = 0; struct sgx_epc_page *page; LIST_HEAD(dirty); int ret; @@ -59,7 +63,7 @@ static void __sgx_sanitize_pages(struct list_head *dirty_page_list) /* dirty_page_list is thread-local, no need for a lock: */ while (!list_empty(dirty_page_list)) { if (kthread_should_stop()) - return; + return 0; page = list_first_entry(dirty_page_list, struct sgx_epc_page, list); @@ -92,12 +96,14 @@ static void __sgx_sanitize_pages(struct list_head *dirty_page_list) } else { /* The page is not yet clean - move to the dirty list. */ list_move_tail(&page->list, &dirty); + left_dirty++; } cond_resched(); } list_splice(&dirty, dirty_page_list); + return left_dirty; } static bool sgx_reclaimer_age(struct sgx_epc_page *epc_page) @@ -395,10 +401,7 @@ static int ksgxd(void *p) * required for SECS pages, whose child pages blocked EREMOVE. */ __sgx_sanitize_pages(&sgx_dirty_page_list); - __sgx_sanitize_pages(&sgx_dirty_page_list); - - /* sanity check: */ - WARN_ON(!list_empty(&sgx_dirty_page_list)); + WARN_ON(__sgx_sanitize_pages(&sgx_dirty_page_list)); while (!kthread_should_stop()) { if (try_to_freeze()) diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c index afae4dd77495..b3dba35f466e 100644 --- a/arch/x86/kernel/dumpstack.c +++ b/arch/x86/kernel/dumpstack.c @@ -128,7 +128,7 @@ void show_opcodes(struct pt_regs *regs, const char *loglvl) /* No access to the user space stack of other tasks. Ignore. */ break; default: - printk("%sCode: Unable to access opcode bytes at RIP 0x%lx.\n", + printk("%sCode: Unable to access opcode bytes at 0x%lx.\n", loglvl, prologue); break; } diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c index 68b38925a74f..44f937015e1e 100644 --- a/arch/x86/kernel/early_printk.c +++ b/arch/x86/kernel/early_printk.c @@ -264,11 +264,11 @@ static __init void early_pci_serial_init(char *s) bar0 = read_pci_config(bus, slot, func, PCI_BASE_ADDRESS_0); /* - * Verify it is a UART type device + * Verify it is a 16550-UART type device */ if (((classcode >> 16 != PCI_CLASS_COMMUNICATION_MODEM) && (classcode >> 16 != PCI_CLASS_COMMUNICATION_SERIAL)) || - (((classcode >> 8) & 0xff) != 0x02)) /* 16550 I/F at BAR0 */ { + (((classcode >> 8) & 0xff) != PCI_SERIAL_16550_COMPATIBLE)) { if (!force) return; } @@ -276,22 +276,22 @@ static __init void early_pci_serial_init(char *s) /* * Determine if it is IO or memory mapped */ - if (bar0 & 0x01) { + if ((bar0 & PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_IO) { /* it is IO mapped */ serial_in = io_serial_in; serial_out = io_serial_out; - early_serial_base = bar0&0xfffffffc; + early_serial_base = bar0 & PCI_BASE_ADDRESS_IO_MASK; write_pci_config(bus, slot, func, PCI_COMMAND, - cmdreg|PCI_COMMAND_IO); + cmdreg|PCI_COMMAND_IO); } else { /* It is memory mapped - assume 32-bit alignment */ serial_in = mem32_serial_in; serial_out = mem32_serial_out; /* WARNING! assuming the address is always in the first 4G */ early_serial_base = - (unsigned long)early_ioremap(bar0 & 0xfffffff0, 0x10); + (unsigned long)early_ioremap(bar0 & PCI_BASE_ADDRESS_MEM_MASK, 0x10); write_pci_config(bus, slot, func, PCI_COMMAND, - cmdreg|PCI_COMMAND_MEMORY); + cmdreg|PCI_COMMAND_MEMORY); } /* diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c index e5dd6da78713..01833ebf5e8e 100644 --- a/arch/x86/kernel/irq_32.c +++ b/arch/x86/kernel/irq_32.c @@ -132,7 +132,7 @@ int irq_init_percpu_irqstack(unsigned int cpu) return 0; } -#ifndef CONFIG_PREEMPT_RT +#ifdef CONFIG_SOFTIRQ_ON_OWN_STACK void do_softirq_own_stack(void) { struct irq_stack *irqstk; diff --git a/arch/x86/kernel/rtc.c b/arch/x86/kernel/rtc.c index 586f718b8e95..349046434513 100644 --- a/arch/x86/kernel/rtc.c +++ b/arch/x86/kernel/rtc.c @@ -4,11 +4,8 @@ */ #include <linux/platform_device.h> #include <linux/mc146818rtc.h> -#include <linux/acpi.h> -#include <linux/bcd.h> #include <linux/export.h> #include <linux/pnp.h> -#include <linux/of.h> #include <asm/vsyscall.h> #include <asm/x86_init.h> @@ -20,26 +17,23 @@ /* * This is a special lock that is owned by the CPU and holds the index * register we are working with. It is required for NMI access to the - * CMOS/RTC registers. See include/asm-i386/mc146818rtc.h for details. + * CMOS/RTC registers. See arch/x86/include/asm/mc146818rtc.h for details. */ volatile unsigned long cmos_lock; EXPORT_SYMBOL(cmos_lock); #endif /* CONFIG_X86_32 */ -/* For two digit years assume time is always after that */ -#define CMOS_YEARS_OFFS 2000 - DEFINE_SPINLOCK(rtc_lock); EXPORT_SYMBOL(rtc_lock); /* - * In order to set the CMOS clock precisely, set_rtc_mmss has to be + * In order to set the CMOS clock precisely, mach_set_cmos_time has to be * called 500 ms after the second nowtime has started, because when * nowtime is written into the registers of the CMOS clock, it will * jump to the next second precisely 500 ms later. Check the Motorola * MC146818A or Dallas DS12887 data sheet for details. */ -int mach_set_rtc_mmss(const struct timespec64 *now) +int mach_set_cmos_time(const struct timespec64 *now) { unsigned long long nowtime = now->tv_sec; struct rtc_time tm; @@ -62,8 +56,7 @@ int mach_set_rtc_mmss(const struct timespec64 *now) void mach_get_cmos_time(struct timespec64 *now) { - unsigned int status, year, mon, day, hour, min, sec, century = 0; - unsigned long flags; + struct rtc_time tm; /* * If pm_trace abused the RTC as storage, set the timespec to 0, @@ -74,51 +67,13 @@ void mach_get_cmos_time(struct timespec64 *now) return; } - spin_lock_irqsave(&rtc_lock, flags); - - /* - * If UIP is clear, then we have >= 244 microseconds before - * RTC registers will be updated. Spec sheet says that this - * is the reliable way to read RTC - registers. If UIP is set - * then the register access might be invalid. - */ - while ((CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP)) - cpu_relax(); - - sec = CMOS_READ(RTC_SECONDS); - min = CMOS_READ(RTC_MINUTES); - hour = CMOS_READ(RTC_HOURS); - day = CMOS_READ(RTC_DAY_OF_MONTH); - mon = CMOS_READ(RTC_MONTH); - year = CMOS_READ(RTC_YEAR); - -#ifdef CONFIG_ACPI - if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID && - acpi_gbl_FADT.century) - century = CMOS_READ(acpi_gbl_FADT.century); -#endif - - status = CMOS_READ(RTC_CONTROL); - WARN_ON_ONCE(RTC_ALWAYS_BCD && (status & RTC_DM_BINARY)); - - spin_unlock_irqrestore(&rtc_lock, flags); - - if (RTC_ALWAYS_BCD || !(status & RTC_DM_BINARY)) { - sec = bcd2bin(sec); - min = bcd2bin(min); - hour = bcd2bin(hour); - day = bcd2bin(day); - mon = bcd2bin(mon); - year = bcd2bin(year); + if (mc146818_get_time(&tm)) { + pr_err("Unable to read current time from RTC\n"); + now->tv_sec = now->tv_nsec = 0; + return; } - if (century) { - century = bcd2bin(century); - year += century * 100; - } else - year += CMOS_YEARS_OFFS; - - now->tv_sec = mktime64(year, mon, day, hour, min, sec); + now->tv_sec = rtc_tm_to_time64(&tm); now->tv_nsec = 0; } diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c index d62b2cb85cea..178015a820f0 100644 --- a/arch/x86/kernel/traps.c +++ b/arch/x86/kernel/traps.c @@ -63,6 +63,7 @@ #include <asm/insn-eval.h> #include <asm/vdso.h> #include <asm/tdx.h> +#include <asm/cfi.h> #ifdef CONFIG_X86_64 #include <asm/x86_init.h> @@ -313,7 +314,8 @@ static noinstr bool handle_bug(struct pt_regs *regs) */ if (regs->flags & X86_EFLAGS_IF) raw_local_irq_enable(); - if (report_bug(regs->ip, regs) == BUG_TRAP_TYPE_WARN) { + if (report_bug(regs->ip, regs) == BUG_TRAP_TYPE_WARN || + handle_cfi_failure(regs) == BUG_TRAP_TYPE_WARN) { regs->ip += LEN_UD2; handled = true; } diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c index e84ee5cdbd8c..57353519bc11 100644 --- a/arch/x86/kernel/x86_init.c +++ b/arch/x86/kernel/x86_init.c @@ -138,7 +138,7 @@ struct x86_platform_ops x86_platform __ro_after_init = { .calibrate_cpu = native_calibrate_cpu_early, .calibrate_tsc = native_calibrate_tsc, .get_wallclock = mach_get_cmos_time, - .set_wallclock = mach_set_rtc_mmss, + .set_wallclock = mach_set_cmos_time, .iommu_shutdown = iommu_shutdown_noop, .is_untracked_pat_range = is_ISA_range, .nmi_init = default_nmi_init, diff --git a/arch/x86/kvm/cpuid.c b/arch/x86/kvm/cpuid.c index 75dcf7a72605..2796dde06302 100644 --- a/arch/x86/kvm/cpuid.c +++ b/arch/x86/kvm/cpuid.c @@ -315,7 +315,6 @@ static void kvm_vcpu_after_set_cpuid(struct kvm_vcpu *vcpu) { struct kvm_lapic *apic = vcpu->arch.apic; struct kvm_cpuid_entry2 *best; - u64 guest_supported_xcr0; best = kvm_find_cpuid_entry(vcpu, 1); if (best && apic) { @@ -327,10 +326,16 @@ static void kvm_vcpu_after_set_cpuid(struct kvm_vcpu *vcpu) kvm_apic_set_version(vcpu); } - guest_supported_xcr0 = + vcpu->arch.guest_supported_xcr0 = cpuid_get_supported_xcr0(vcpu->arch.cpuid_entries, vcpu->arch.cpuid_nent); - vcpu->arch.guest_fpu.fpstate->user_xfeatures = guest_supported_xcr0; + /* + * FP+SSE can always be saved/restored via KVM_{G,S}ET_XSAVE, even if + * XSAVE/XCRO are not exposed to the guest, and even if XSAVE isn't + * supported by the host. + */ + vcpu->arch.guest_fpu.fpstate->user_xfeatures = vcpu->arch.guest_supported_xcr0 | + XFEATURE_MASK_FPSSE; kvm_update_pv_runtime(vcpu); @@ -897,8 +902,6 @@ static inline int __do_cpuid_func(struct kvm_cpuid_array *array, u32 function) entry->edx = 0; } break; - case 9: - break; case 0xa: { /* Architectural Performance Monitoring */ union cpuid10_eax eax; union cpuid10_edx edx; diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c index d5ec3a2ed5a4..aacb28c83e43 100644 --- a/arch/x86/kvm/emulate.c +++ b/arch/x86/kvm/emulate.c @@ -4132,6 +4132,9 @@ static int em_xsetbv(struct x86_emulate_ctxt *ctxt) { u32 eax, ecx, edx; + if (!(ctxt->ops->get_cr(ctxt, 4) & X86_CR4_OSXSAVE)) + return emulate_ud(ctxt); + eax = reg_read(ctxt, VCPU_REGS_RAX); edx = reg_read(ctxt, VCPU_REGS_RDX); ecx = reg_read(ctxt, VCPU_REGS_RCX); diff --git a/arch/x86/kvm/mmu/mmu.c b/arch/x86/kvm/mmu/mmu.c index e418ef3ecfcb..3552e6af3684 100644 --- a/arch/x86/kvm/mmu/mmu.c +++ b/arch/x86/kvm/mmu/mmu.c @@ -1596,6 +1596,8 @@ static void __rmap_add(struct kvm *kvm, rmap_head = gfn_to_rmap(gfn, sp->role.level, slot); rmap_count = pte_list_add(cache, spte, rmap_head); + if (rmap_count > kvm->stat.max_mmu_rmap_size) + kvm->stat.max_mmu_rmap_size = rmap_count; if (rmap_count > RMAP_RECYCLE_THRESHOLD) { kvm_zap_all_rmap_sptes(kvm, rmap_head); kvm_flush_remote_tlbs_with_address( diff --git a/arch/x86/kvm/vmx/nested.c b/arch/x86/kvm/vmx/nested.c index ddd4367d4826..7eaf96064cb0 100644 --- a/arch/x86/kvm/vmx/nested.c +++ b/arch/x86/kvm/vmx/nested.c @@ -2570,7 +2570,7 @@ static int prepare_vmcs02(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12, * bits which we consider mandatory enabled. * The CR0_READ_SHADOW is what L2 should have expected to read given * the specifications by L1; It's not enough to take - * vmcs12->cr0_read_shadow because on our cr0_guest_host_mask we we + * vmcs12->cr0_read_shadow because on our cr0_guest_host_mask we * have more bits than L1 expected. */ vmx_set_cr0(vcpu, vmcs12->guest_cr0); diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 43a6a7efc6ec..b0c47b41c264 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -1011,15 +1011,10 @@ void kvm_load_host_xsave_state(struct kvm_vcpu *vcpu) } EXPORT_SYMBOL_GPL(kvm_load_host_xsave_state); -static inline u64 kvm_guest_supported_xcr0(struct kvm_vcpu *vcpu) -{ - return vcpu->arch.guest_fpu.fpstate->user_xfeatures; -} - #ifdef CONFIG_X86_64 static inline u64 kvm_guest_supported_xfd(struct kvm_vcpu *vcpu) { - return kvm_guest_supported_xcr0(vcpu) & XFEATURE_MASK_USER_DYNAMIC; + return vcpu->arch.guest_supported_xcr0 & XFEATURE_MASK_USER_DYNAMIC; } #endif @@ -1042,7 +1037,7 @@ static int __kvm_set_xcr(struct kvm_vcpu *vcpu, u32 index, u64 xcr) * saving. However, xcr0 bit 0 is always set, even if the * emulated CPU does not support XSAVE (see kvm_vcpu_reset()). */ - valid_bits = kvm_guest_supported_xcr0(vcpu) | XFEATURE_MASK_FP; + valid_bits = vcpu->arch.guest_supported_xcr0 | XFEATURE_MASK_FP; if (xcr0 & ~valid_bits) return 1; @@ -1070,6 +1065,7 @@ static int __kvm_set_xcr(struct kvm_vcpu *vcpu, u32 index, u64 xcr) int kvm_emulate_xsetbv(struct kvm_vcpu *vcpu) { + /* Note, #UD due to CR4.OSXSAVE=0 has priority over the intercept. */ if (static_call(kvm_x86_get_cpl)(vcpu) != 0 || __kvm_set_xcr(vcpu, kvm_rcx_read(vcpu), kvm_read_edx_eax(vcpu))) { kvm_inject_gp(vcpu, 0); diff --git a/arch/x86/lib/clear_page_64.S b/arch/x86/lib/clear_page_64.S index fe59b8ac4fcc..ecbfb4dd3b01 100644 --- a/arch/x86/lib/clear_page_64.S +++ b/arch/x86/lib/clear_page_64.S @@ -1,5 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0-only */ #include <linux/linkage.h> +#include <asm/asm.h> #include <asm/export.h> /* @@ -50,3 +51,140 @@ SYM_FUNC_START(clear_page_erms) RET SYM_FUNC_END(clear_page_erms) EXPORT_SYMBOL_GPL(clear_page_erms) + +/* + * Default clear user-space. + * Input: + * rdi destination + * rcx count + * + * Output: + * rcx: uncleared bytes or 0 if successful. + */ +SYM_FUNC_START(clear_user_original) + /* + * Copy only the lower 32 bits of size as that is enough to handle the rest bytes, + * i.e., no need for a 'q' suffix and thus a REX prefix. + */ + mov %ecx,%eax + shr $3,%rcx + jz .Lrest_bytes + + # do the qwords first + .p2align 4 +.Lqwords: + movq $0,(%rdi) + lea 8(%rdi),%rdi + dec %rcx + jnz .Lqwords + +.Lrest_bytes: + and $7, %eax + jz .Lexit + + # now do the rest bytes +.Lbytes: + movb $0,(%rdi) + inc %rdi + dec %eax + jnz .Lbytes + +.Lexit: + /* + * %rax still needs to be cleared in the exception case because this function is called + * from inline asm and the compiler expects %rax to be zero when exiting the inline asm, + * in case it might reuse it somewhere. + */ + xor %eax,%eax + RET + +.Lqwords_exception: + # convert remaining qwords back into bytes to return to caller + shl $3, %rcx + and $7, %eax + add %rax,%rcx + jmp .Lexit + +.Lbytes_exception: + mov %eax,%ecx + jmp .Lexit + + _ASM_EXTABLE_UA(.Lqwords, .Lqwords_exception) + _ASM_EXTABLE_UA(.Lbytes, .Lbytes_exception) +SYM_FUNC_END(clear_user_original) +EXPORT_SYMBOL(clear_user_original) + +/* + * Alternative clear user-space when CPU feature X86_FEATURE_REP_GOOD is + * present. + * Input: + * rdi destination + * rcx count + * + * Output: + * rcx: uncleared bytes or 0 if successful. + */ +SYM_FUNC_START(clear_user_rep_good) + # call the original thing for less than a cacheline + cmp $64, %rcx + jb clear_user_original + +.Lprep: + # copy lower 32-bits for rest bytes + mov %ecx, %edx + shr $3, %rcx + jz .Lrep_good_rest_bytes + +.Lrep_good_qwords: + rep stosq + +.Lrep_good_rest_bytes: + and $7, %edx + jz .Lrep_good_exit + +.Lrep_good_bytes: + mov %edx, %ecx + rep stosb + +.Lrep_good_exit: + # see .Lexit comment above + xor %eax, %eax + RET + +.Lrep_good_qwords_exception: + # convert remaining qwords back into bytes to return to caller + shl $3, %rcx + and $7, %edx + add %rdx, %rcx + jmp .Lrep_good_exit + + _ASM_EXTABLE_UA(.Lrep_good_qwords, .Lrep_good_qwords_exception) + _ASM_EXTABLE_UA(.Lrep_good_bytes, .Lrep_good_exit) +SYM_FUNC_END(clear_user_rep_good) +EXPORT_SYMBOL(clear_user_rep_good) + +/* + * Alternative clear user-space when CPU feature X86_FEATURE_ERMS is present. + * Input: + * rdi destination + * rcx count + * + * Output: + * rcx: uncleared bytes or 0 if successful. + * + */ +SYM_FUNC_START(clear_user_erms) + # call the original thing for less than a cacheline + cmp $64, %rcx + jb clear_user_original + +.Lerms_bytes: + rep stosb + +.Lerms_exit: + xorl %eax,%eax + RET + + _ASM_EXTABLE_UA(.Lerms_bytes, .Lerms_exit) +SYM_FUNC_END(clear_user_erms) +EXPORT_SYMBOL(clear_user_erms) diff --git a/arch/x86/lib/memcpy_64.S b/arch/x86/lib/memcpy_64.S index d0d7b9bc6cad..dd8cd8831251 100644 --- a/arch/x86/lib/memcpy_64.S +++ b/arch/x86/lib/memcpy_64.S @@ -2,6 +2,7 @@ /* Copyright 2002 Andi Kleen */ #include <linux/linkage.h> +#include <linux/cfi_types.h> #include <asm/errno.h> #include <asm/cpufeatures.h> #include <asm/alternative.h> @@ -27,7 +28,7 @@ * Output: * rax original destination */ -SYM_FUNC_START(__memcpy) +SYM_TYPED_FUNC_START(__memcpy) ALTERNATIVE_2 "jmp memcpy_orig", "", X86_FEATURE_REP_GOOD, \ "jmp memcpy_erms", X86_FEATURE_ERMS diff --git a/arch/x86/lib/usercopy.c b/arch/x86/lib/usercopy.c index ad0139d25401..f1bb18617156 100644 --- a/arch/x86/lib/usercopy.c +++ b/arch/x86/lib/usercopy.c @@ -44,7 +44,7 @@ copy_from_user_nmi(void *to, const void __user *from, unsigned long n) * called from other contexts. */ pagefault_disable(); - ret = __copy_from_user_inatomic(to, from, n); + ret = raw_copy_from_user(to, from, n); pagefault_enable(); return ret; diff --git a/arch/x86/lib/usercopy_64.c b/arch/x86/lib/usercopy_64.c index 0ae6cf804197..6c1f8ac5e721 100644 --- a/arch/x86/lib/usercopy_64.c +++ b/arch/x86/lib/usercopy_64.c @@ -14,46 +14,6 @@ * Zero Userspace */ -unsigned long __clear_user(void __user *addr, unsigned long size) -{ - long __d0; - might_fault(); - /* no memory constraint because it doesn't change any memory gcc knows - about */ - stac(); - asm volatile( - " testq %[size8],%[size8]\n" - " jz 4f\n" - " .align 16\n" - "0: movq $0,(%[dst])\n" - " addq $8,%[dst]\n" - " decl %%ecx ; jnz 0b\n" - "4: movq %[size1],%%rcx\n" - " testl %%ecx,%%ecx\n" - " jz 2f\n" - "1: movb $0,(%[dst])\n" - " incq %[dst]\n" - " decl %%ecx ; jnz 1b\n" - "2:\n" - - _ASM_EXTABLE_TYPE_REG(0b, 2b, EX_TYPE_UCOPY_LEN8, %[size1]) - _ASM_EXTABLE_UA(1b, 2b) - - : [size8] "=&c"(size), [dst] "=&D" (__d0) - : [size1] "r"(size & 7), "[size8]" (size / 8), "[dst]"(addr)); - clac(); - return size; -} -EXPORT_SYMBOL(__clear_user); - -unsigned long clear_user(void __user *to, unsigned long n) -{ - if (access_ok(to, n)) - return __clear_user(to, n); - return n; -} -EXPORT_SYMBOL(clear_user); - #ifdef CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE /** * clean_cache_range - write back a cache range with CLWB diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile index f8220fd2c169..829c1409ffbd 100644 --- a/arch/x86/mm/Makefile +++ b/arch/x86/mm/Makefile @@ -4,10 +4,12 @@ KCOV_INSTRUMENT_tlb.o := n KCOV_INSTRUMENT_mem_encrypt.o := n KCOV_INSTRUMENT_mem_encrypt_amd.o := n KCOV_INSTRUMENT_mem_encrypt_identity.o := n +KCOV_INSTRUMENT_pgprot.o := n KASAN_SANITIZE_mem_encrypt.o := n KASAN_SANITIZE_mem_encrypt_amd.o := n KASAN_SANITIZE_mem_encrypt_identity.o := n +KASAN_SANITIZE_pgprot.o := n # Disable KCSAN entirely, because otherwise we get warnings that some functions # reference __initdata sections. @@ -17,6 +19,7 @@ ifdef CONFIG_FUNCTION_TRACER CFLAGS_REMOVE_mem_encrypt.o = -pg CFLAGS_REMOVE_mem_encrypt_amd.o = -pg CFLAGS_REMOVE_mem_encrypt_identity.o = -pg +CFLAGS_REMOVE_pgprot.o = -pg endif obj-y := init.o init_$(BITS).o fault.o ioremap.o extable.o mmap.o \ diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c index fa71a5d12e87..a498ae1fbe66 100644 --- a/arch/x86/mm/fault.c +++ b/arch/x86/mm/fault.c @@ -769,6 +769,8 @@ show_signal_msg(struct pt_regs *regs, unsigned long error_code, unsigned long address, struct task_struct *tsk) { const char *loglvl = task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG; + /* This is a racy snapshot, but it's better than nothing. */ + int cpu = raw_smp_processor_id(); if (!unhandled_signal(tsk, SIGSEGV)) return; @@ -782,6 +784,14 @@ show_signal_msg(struct pt_regs *regs, unsigned long error_code, print_vma_addr(KERN_CONT " in ", regs->ip); + /* + * Dump the likely CPU where the fatal segfault happened. + * This can help identify faulty hardware. + */ + printk(KERN_CONT " likely on CPU %d (core %d, socket %d)", cpu, + topology_core_id(cpu), topology_physical_package_id(cpu)); + + printk(KERN_CONT "\n"); show_opcodes(regs, loglvl); diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c index c1f6c1c51d99..99620428ad78 100644 --- a/arch/x86/net/bpf_jit_comp.c +++ b/arch/x86/net/bpf_jit_comp.c @@ -419,7 +419,9 @@ static void emit_indirect_jump(u8 **pprog, int reg, u8 *ip) OPTIMIZER_HIDE_VAR(reg); emit_jump(&prog, &__x86_indirect_thunk_array[reg], ip); } else { - EMIT2(0xFF, 0xE0 + reg); + EMIT2(0xFF, 0xE0 + reg); /* jmp *%\reg */ + if (IS_ENABLED(CONFIG_RETPOLINE) || IS_ENABLED(CONFIG_SLS)) + EMIT1(0xCC); /* int3 */ } *pprog = prog; @@ -662,7 +664,7 @@ static void emit_mov_imm64(u8 **pprog, u32 dst_reg, */ emit_mov_imm32(&prog, false, dst_reg, imm32_lo); } else { - /* movabsq %rax, imm64 */ + /* movabsq rax, imm64 */ EMIT2(add_1mod(0x48, dst_reg), add_1reg(0xB8, dst_reg)); EMIT(imm32_lo, 4); EMIT(imm32_hi, 4); @@ -1751,34 +1753,60 @@ emit_jmp: static void save_regs(const struct btf_func_model *m, u8 **prog, int nr_args, int stack_size) { - int i; + int i, j, arg_size, nr_regs; /* Store function arguments to stack. * For a function that accepts two pointers the sequence will be: * mov QWORD PTR [rbp-0x10],rdi * mov QWORD PTR [rbp-0x8],rsi */ - for (i = 0; i < min(nr_args, 6); i++) - emit_stx(prog, bytes_to_bpf_size(m->arg_size[i]), - BPF_REG_FP, - i == 5 ? X86_REG_R9 : BPF_REG_1 + i, - -(stack_size - i * 8)); + for (i = 0, j = 0; i < min(nr_args, 6); i++) { + if (m->arg_flags[i] & BTF_FMODEL_STRUCT_ARG) { + nr_regs = (m->arg_size[i] + 7) / 8; + arg_size = 8; + } else { + nr_regs = 1; + arg_size = m->arg_size[i]; + } + + while (nr_regs) { + emit_stx(prog, bytes_to_bpf_size(arg_size), + BPF_REG_FP, + j == 5 ? X86_REG_R9 : BPF_REG_1 + j, + -(stack_size - j * 8)); + nr_regs--; + j++; + } + } } static void restore_regs(const struct btf_func_model *m, u8 **prog, int nr_args, int stack_size) { - int i; + int i, j, arg_size, nr_regs; /* Restore function arguments from stack. * For a function that accepts two pointers the sequence will be: * EMIT4(0x48, 0x8B, 0x7D, 0xF0); mov rdi,QWORD PTR [rbp-0x10] * EMIT4(0x48, 0x8B, 0x75, 0xF8); mov rsi,QWORD PTR [rbp-0x8] */ - for (i = 0; i < min(nr_args, 6); i++) - emit_ldx(prog, bytes_to_bpf_size(m->arg_size[i]), - i == 5 ? X86_REG_R9 : BPF_REG_1 + i, - BPF_REG_FP, - -(stack_size - i * 8)); + for (i = 0, j = 0; i < min(nr_args, 6); i++) { + if (m->arg_flags[i] & BTF_FMODEL_STRUCT_ARG) { + nr_regs = (m->arg_size[i] + 7) / 8; + arg_size = 8; + } else { + nr_regs = 1; + arg_size = m->arg_size[i]; + } + + while (nr_regs) { + emit_ldx(prog, bytes_to_bpf_size(arg_size), + j == 5 ? X86_REG_R9 : BPF_REG_1 + j, + BPF_REG_FP, + -(stack_size - j * 8)); + nr_regs--; + j++; + } + } } static int invoke_bpf_prog(const struct btf_func_model *m, u8 **pprog, @@ -1810,6 +1838,9 @@ static int invoke_bpf_prog(const struct btf_func_model *m, u8 **pprog, if (p->aux->sleepable) { enter = __bpf_prog_enter_sleepable; exit = __bpf_prog_exit_sleepable; + } else if (p->type == BPF_PROG_TYPE_STRUCT_OPS) { + enter = __bpf_prog_enter_struct_ops; + exit = __bpf_prog_exit_struct_ops; } else if (p->expected_attach_type == BPF_LSM_CGROUP) { enter = __bpf_prog_enter_lsm_cgroup; exit = __bpf_prog_exit_lsm_cgroup; @@ -2013,13 +2044,14 @@ static int invoke_bpf_mod_ret(const struct btf_func_model *m, u8 **pprog, int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *image, void *image_end, const struct btf_func_model *m, u32 flags, struct bpf_tramp_links *tlinks, - void *orig_call) + void *func_addr) { - int ret, i, nr_args = m->nr_args; + int ret, i, nr_args = m->nr_args, extra_nregs = 0; int regs_off, ip_off, args_off, stack_size = nr_args * 8, run_ctx_off; struct bpf_tramp_links *fentry = &tlinks[BPF_TRAMP_FENTRY]; struct bpf_tramp_links *fexit = &tlinks[BPF_TRAMP_FEXIT]; struct bpf_tramp_links *fmod_ret = &tlinks[BPF_TRAMP_MODIFY_RETURN]; + void *orig_call = func_addr; u8 **branches = NULL; u8 *prog; bool save_ret; @@ -2028,6 +2060,14 @@ int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *image, void *i if (nr_args > 6) return -ENOTSUPP; + for (i = 0; i < MAX_BPF_FUNC_ARGS; i++) { + if (m->arg_flags[i] & BTF_FMODEL_STRUCT_ARG) + extra_nregs += (m->arg_size[i] + 7) / 8 - 1; + } + if (nr_args + extra_nregs > 6) + return -ENOTSUPP; + stack_size += extra_nregs * 8; + /* Generated trampoline stack layout: * * RBP + 8 [ return address ] @@ -2040,7 +2080,7 @@ int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *image, void *i * [ ... ] * RBP - regs_off [ reg_arg1 ] program's ctx pointer * - * RBP - args_off [ args count ] always + * RBP - args_off [ arg regs count ] always * * RBP - ip_off [ traced function ] BPF_TRAMP_F_IP_ARG flag * @@ -2083,21 +2123,19 @@ int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *image, void *i EMIT4(0x48, 0x83, 0xEC, stack_size); /* sub rsp, stack_size */ EMIT1(0x53); /* push rbx */ - /* Store number of arguments of the traced function: - * mov rax, nr_args + /* Store number of argument registers of the traced function: + * mov rax, nr_args + extra_nregs * mov QWORD PTR [rbp - args_off], rax */ - emit_mov_imm64(&prog, BPF_REG_0, 0, (u32) nr_args); + emit_mov_imm64(&prog, BPF_REG_0, 0, (u32) nr_args + extra_nregs); emit_stx(&prog, BPF_DW, BPF_REG_FP, BPF_REG_0, -args_off); if (flags & BPF_TRAMP_F_IP_ARG) { /* Store IP address of the traced function: - * mov rax, QWORD PTR [rbp + 8] - * sub rax, X86_PATCH_SIZE + * movabsq rax, func_addr * mov QWORD PTR [rbp - ip_off], rax */ - emit_ldx(&prog, BPF_DW, BPF_REG_0, BPF_REG_FP, 8); - EMIT4(0x48, 0x83, 0xe8, X86_PATCH_SIZE); + emit_mov_imm64(&prog, BPF_REG_0, (long) func_addr >> 32, (u32) (long) func_addr); emit_stx(&prog, BPF_DW, BPF_REG_FP, BPF_REG_0, -ip_off); } @@ -2209,7 +2247,7 @@ cleanup: return ret; } -static int emit_bpf_dispatcher(u8 **pprog, int a, int b, s64 *progs) +static int emit_bpf_dispatcher(u8 **pprog, int a, int b, s64 *progs, u8 *image, u8 *buf) { u8 *jg_reloc, *prog = *pprog; int pivot, err, jg_bytes = 1; @@ -2225,12 +2263,12 @@ static int emit_bpf_dispatcher(u8 **pprog, int a, int b, s64 *progs) EMIT2_off32(0x81, add_1reg(0xF8, BPF_REG_3), progs[a]); err = emit_cond_near_jump(&prog, /* je func */ - (void *)progs[a], prog, + (void *)progs[a], image + (prog - buf), X86_JE); if (err) return err; - emit_indirect_jump(&prog, 2 /* rdx */, prog); + emit_indirect_jump(&prog, 2 /* rdx */, image + (prog - buf)); *pprog = prog; return 0; @@ -2255,7 +2293,7 @@ static int emit_bpf_dispatcher(u8 **pprog, int a, int b, s64 *progs) jg_reloc = prog; err = emit_bpf_dispatcher(&prog, a, a + pivot, /* emit lower_part */ - progs); + progs, image, buf); if (err) return err; @@ -2269,7 +2307,7 @@ static int emit_bpf_dispatcher(u8 **pprog, int a, int b, s64 *progs) emit_code(jg_reloc - jg_bytes, jg_offset, jg_bytes); err = emit_bpf_dispatcher(&prog, a + pivot + 1, /* emit upper_part */ - b, progs); + b, progs, image, buf); if (err) return err; @@ -2289,12 +2327,12 @@ static int cmp_ips(const void *a, const void *b) return 0; } -int arch_prepare_bpf_dispatcher(void *image, s64 *funcs, int num_funcs) +int arch_prepare_bpf_dispatcher(void *image, void *buf, s64 *funcs, int num_funcs) { - u8 *prog = image; + u8 *prog = buf; sort(funcs, num_funcs, sizeof(funcs[0]), cmp_ips, NULL); - return emit_bpf_dispatcher(&prog, 0, num_funcs - 1, funcs); + return emit_bpf_dispatcher(&prog, 0, num_funcs - 1, funcs, image, buf); } struct x64_jit_data { diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c index 6e598bd78eef..ebc98a68c400 100644 --- a/arch/x86/platform/efi/efi.c +++ b/arch/x86/platform/efi/efi.c @@ -169,7 +169,7 @@ static void __init do_add_efi_memmap(void) } /* - * Given add_efi_memmap defaults to 0 and there there is no alternative + * Given add_efi_memmap defaults to 0 and there is no alternative * e820 mechanism for soft-reserved memory, import the full EFI memory * map if soft reservations are present and enabled. Otherwise, the * mechanism to disable the kernel's consideration of EFI_MEMORY_SP is diff --git a/arch/x86/purgatory/Makefile b/arch/x86/purgatory/Makefile index 31c634a22818..58a200dc762d 100644 --- a/arch/x86/purgatory/Makefile +++ b/arch/x86/purgatory/Makefile @@ -55,6 +55,10 @@ ifdef CONFIG_RETPOLINE PURGATORY_CFLAGS_REMOVE += $(RETPOLINE_CFLAGS) endif +ifdef CONFIG_CFI_CLANG +PURGATORY_CFLAGS_REMOVE += $(CC_FLAGS_CFI) +endif + CFLAGS_REMOVE_purgatory.o += $(PURGATORY_CFLAGS_REMOVE) CFLAGS_purgatory.o += $(PURGATORY_CFLAGS) diff --git a/arch/x86/tools/relocs.c b/arch/x86/tools/relocs.c index e2c5b296120d..2925074b9a58 100644 --- a/arch/x86/tools/relocs.c +++ b/arch/x86/tools/relocs.c @@ -56,6 +56,7 @@ static const char * const sym_regex_kernel[S_NSYMTYPES] = { "^(xen_irq_disable_direct_reloc$|" "xen_save_fl_direct_reloc$|" "VDSO|" + "__kcfi_typeid_|" "__crc_)", /* diff --git a/arch/x86/um/shared/sysdep/syscalls_32.h b/arch/x86/um/shared/sysdep/syscalls_32.h index 68fd2cf526fd..f6e9f84397e7 100644 --- a/arch/x86/um/shared/sysdep/syscalls_32.h +++ b/arch/x86/um/shared/sysdep/syscalls_32.h @@ -6,10 +6,9 @@ #include <asm/unistd.h> #include <sysdep/ptrace.h> -typedef long syscall_handler_t(struct pt_regs); +typedef long syscall_handler_t(struct syscall_args); extern syscall_handler_t *sys_call_table[]; #define EXECUTE_SYSCALL(syscall, regs) \ - ((long (*)(struct syscall_args)) \ - (*sys_call_table[syscall]))(SYSCALL_ARGS(®s->regs)) + ((*sys_call_table[syscall]))(SYSCALL_ARGS(®s->regs)) diff --git a/arch/x86/um/tls_32.c b/arch/x86/um/tls_32.c index ac8eee093f9c..66162eafd8e8 100644 --- a/arch/x86/um/tls_32.c +++ b/arch/x86/um/tls_32.c @@ -65,9 +65,6 @@ static int get_free_idx(struct task_struct* task) struct thread_struct *t = &task->thread; int idx; - if (!t->arch.tls_array) - return GDT_ENTRY_TLS_MIN; - for (idx = 0; idx < GDT_ENTRY_TLS_ENTRIES; idx++) if (!t->arch.tls_array[idx].present) return idx + GDT_ENTRY_TLS_MIN; @@ -240,9 +237,6 @@ static int get_tls_entry(struct task_struct *task, struct user_desc *info, { struct thread_struct *t = &task->thread; - if (!t->arch.tls_array) - goto clear; - if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX) return -EINVAL; diff --git a/arch/x86/um/vdso/Makefile b/arch/x86/um/vdso/Makefile index 8c0396fd0e6f..6fbe97c52c99 100644 --- a/arch/x86/um/vdso/Makefile +++ b/arch/x86/um/vdso/Makefile @@ -65,7 +65,7 @@ quiet_cmd_vdso = VDSO $@ -Wl,-T,$(filter %.lds,$^) $(filter %.o,$^) && \ sh $(srctree)/$(src)/checkundef.sh '$(NM)' '$@' -VDSO_LDFLAGS = -fPIC -shared -Wl,--hash-style=sysv +VDSO_LDFLAGS = -fPIC -shared -Wl,--hash-style=sysv -z noexecstack GCOV_PROFILE := n # diff --git a/arch/x86/xen/enlighten_pv.c b/arch/x86/xen/enlighten_pv.c index 0ed2e487a693..9b1a58dda935 100644 --- a/arch/x86/xen/enlighten_pv.c +++ b/arch/x86/xen/enlighten_pv.c @@ -765,6 +765,7 @@ static void xen_load_idt(const struct desc_ptr *desc) { static DEFINE_SPINLOCK(lock); static struct trap_info traps[257]; + static const struct trap_info zero = { }; unsigned out; trace_xen_cpu_load_idt(desc); @@ -774,7 +775,7 @@ static void xen_load_idt(const struct desc_ptr *desc) memcpy(this_cpu_ptr(&idt_desc), desc, sizeof(idt_desc)); out = xen_convert_trap_info(desc, traps, false); - memset(&traps[out], 0, sizeof(traps[0])); + traps[out] = zero; xen_mc_flush(); if (HYPERVISOR_set_trap_table(traps)) |