diff options
Diffstat (limited to 'drivers/ata/pata_parport/Kconfig')
| -rw-r--r-- | drivers/ata/pata_parport/Kconfig | 141 |
1 files changed, 141 insertions, 0 deletions
diff --git a/drivers/ata/pata_parport/Kconfig b/drivers/ata/pata_parport/Kconfig new file mode 100644 index 000000000000..0893a13e7979 --- /dev/null +++ b/drivers/ata/pata_parport/Kconfig @@ -0,0 +1,141 @@ +# SPDX-License-Identifier: GPL-2.0 + +comment "Parallel IDE protocol modules" + depends on PATA_PARPORT + +config PATA_PARPORT_ATEN + tristate "ATEN EH-100 protocol" + depends on PATA_PARPORT + help + This option enables support for the ATEN EH-100 parallel port IDE + protocol. This protocol is used in some inexpensive low performance + parallel port kits made in Hong Kong. + +config PATA_PARPORT_BPCK + tristate "MicroSolutions backpack (Series 5) protocol" + depends on PATA_PARPORT + help + This option enables support for the Micro Solutions BACKPACK + parallel port Series 5 IDE protocol. (Most BACKPACK drives made + before 1999 were Series 5) Series 5 drives will NOT always have the + Series noted on the bottom of the drive. Series 6 drivers will. + + In other words, if your BACKPACK drive doesn't say "Series 6" on the + bottom, enable this option. + +config PATA_PARPORT_BPCK6 + tristate "MicroSolutions backpack (Series 6) protocol" + depends on (PATA_PARPORT) && !64BIT + help + This option enables support for the Micro Solutions BACKPACK + parallel port Series 6 IDE protocol. (Most BACKPACK drives made + after 1999 were Series 6) Series 6 drives will have the Series noted + on the bottom of the drive. Series 5 drivers don't always have it + noted. + + In other words, if your BACKPACK drive says "Series 6" on the + bottom, enable this option. + +config PATA_PARPORT_COMM + tristate "DataStor Commuter protocol" + depends on PATA_PARPORT + help + This option enables support for the Commuter parallel port IDE + protocol from DataStor. + +config PATA_PARPORT_DSTR + tristate "DataStor EP-2000 protocol" + depends on PATA_PARPORT + help + This option enables support for the EP-2000 parallel port IDE + protocol from DataStor + +config PATA_PARPORT_FIT2 + tristate "FIT TD-2000 protocol" + depends on PATA_PARPORT + help + This option enables support for the TD-2000 parallel port IDE + protocol from Fidelity International Technology. This is a simple + (low speed) adapter that is used in some portable hard drives. + +config PATA_PARPORT_FIT3 + tristate "FIT TD-3000 protocol" + depends on PATA_PARPORT + help + This option enables support for the TD-3000 parallel port IDE + protocol from Fidelity International Technology. This protocol is + used in newer models of their portable disk, CD-ROM and PD/CD + devices. + +config PATA_PARPORT_EPAT + tristate "Shuttle EPAT/EPEZ protocol" + depends on PATA_PARPORT + help + This option enables support for the EPAT parallel port IDE protocol. + EPAT is a parallel port IDE adapter manufactured by Shuttle + Technology and widely used in devices from major vendors such as + Hewlett-Packard, SyQuest, Imation and Avatar. + +config PATA_PARPORT_EPATC8 + bool "Support c7/c8 chips" + depends on PATA_PARPORT_EPAT + help + This option enables support for the newer Shuttle EP1284 (aka c7 and + c8) chip. You need this if you are using any recent Imation SuperDisk + (LS-120) drive. + +config PATA_PARPORT_EPIA + tristate "Shuttle EPIA protocol" + depends on PATA_PARPORT + help + This option enables support for the (obsolete) EPIA parallel port + IDE protocol from Shuttle Technology. This adapter can still be + found in some no-name kits. + +config PATA_PARPORT_FRIQ + tristate "Freecom IQ ASIC-2 protocol" + depends on PATA_PARPORT + help + This option enables support for version 2 of the Freecom IQ parallel + port IDE adapter. This adapter is used by the Maxell Superdisk + drive. + +config PATA_PARPORT_FRPW + tristate "FreeCom power protocol" + depends on PATA_PARPORT + help + This option enables support for the Freecom power parallel port IDE + protocol. + +config PATA_PARPORT_KBIC + tristate "KingByte KBIC-951A/971A protocols" + depends on PATA_PARPORT + help + This option enables support for the KBIC-951A and KBIC-971A parallel + port IDE protocols from KingByte Information Corp. KingByte's + adapters appear in many no-name portable disk and CD-ROM products, + especially in Europe. + +config PATA_PARPORT_KTTI + tristate "KT PHd protocol" + depends on PATA_PARPORT + help + This option enables support for the "PHd" parallel port IDE protocol + from KT Technology. This is a simple (low speed) adapter that is + used in some 2.5" portable hard drives. + +config PATA_PARPORT_ON20 + tristate "OnSpec 90c20 protocol" + depends on PATA_PARPORT + help + This option enables support for the (obsolete) 90c20 parallel port + IDE protocol from OnSpec (often marketed under the ValuStore brand + name). + +config PATA_PARPORT_ON26 + tristate "OnSpec 90c26 protocol" + depends on PATA_PARPORT + help + This option enables support for the 90c26 parallel port IDE protocol + from OnSpec Electronics (often marketed under the ValuStore brand + name). |