summaryrefslogtreecommitdiff
path: root/drivers/ata/pata_parport/epia.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/pata_parport/epia.c')
-rw-r--r--drivers/ata/pata_parport/epia.c316
1 files changed, 316 insertions, 0 deletions
diff --git a/drivers/ata/pata_parport/epia.c b/drivers/ata/pata_parport/epia.c
new file mode 100644
index 000000000000..417d5a3c7f72
--- /dev/null
+++ b/drivers/ata/pata_parport/epia.c
@@ -0,0 +1,316 @@
+/*
+ epia.c (c) 1997-8 Grant R. Guenther <grant@torque.net>
+ Under the terms of the GNU General Public License.
+
+ epia.c is a low-level protocol driver for Shuttle Technologies
+ EPIA parallel to IDE adapter chip. This device is now obsolete
+ and has been replaced with the EPAT chip, which is supported
+ by epat.c, however, some devices based on EPIA are still
+ available.
+
+*/
+
+/* Changes:
+
+ 1.01 GRG 1998.05.06 init_proto, release_proto
+ 1.02 GRG 1998.06.17 support older versions of EPIA
+
+*/
+
+#define EPIA_VERSION "1.02"
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <asm/io.h>
+
+#include <linux/pata_parport.h>
+
+/* mode codes: 0 nybble reads on port 1, 8-bit writes
+ 1 5/3 reads on ports 1 & 2, 8-bit writes
+ 2 8-bit reads and writes
+ 3 8-bit EPP mode
+ 4 16-bit EPP
+ 5 32-bit EPP
+*/
+
+#define j44(a,b) (((a>>4)&0x0f)+(b&0xf0))
+#define j53(a,b) (((a>>3)&0x1f)+((b<<4)&0xe0))
+
+/* cont = 0 IDE register file
+ cont = 1 IDE control registers
+*/
+
+static int cont_map[2] = { 0, 0x80 };
+
+static int epia_read_regr( PIA *pi, int cont, int regr )
+
+{ int a, b, r;
+
+ regr += cont_map[cont];
+
+ switch (pi->mode) {
+
+ case 0: r = regr^0x39;
+ w0(r); w2(1); w2(3); w0(r);
+ a = r1(); w2(1); b = r1(); w2(4);
+ return j44(a,b);
+
+ case 1: r = regr^0x31;
+ w0(r); w2(1); w0(r&0x37);
+ w2(3); w2(5); w0(r|0xf0);
+ a = r1(); b = r2(); w2(4);
+ return j53(a,b);
+
+ case 2: r = regr^0x29;
+ w0(r); w2(1); w2(0X21); w2(0x23);
+ a = r0(); w2(4);
+ return a;
+
+ case 3:
+ case 4:
+ case 5: w3(regr); w2(0x24); a = r4(); w2(4);
+ return a;
+
+ }
+ return -1;
+}
+
+static void epia_write_regr( PIA *pi, int cont, int regr, int val)
+
+{ int r;
+
+ regr += cont_map[cont];
+
+ switch (pi->mode) {
+
+ case 0:
+ case 1:
+ case 2: r = regr^0x19;
+ w0(r); w2(1); w0(val); w2(3); w2(4);
+ break;
+
+ case 3:
+ case 4:
+ case 5: r = regr^0x40;
+ w3(r); w4(val); w2(4);
+ break;
+ }
+}
+
+#define WR(r,v) epia_write_regr(pi,0,r,v)
+#define RR(r) (epia_read_regr(pi,0,r))
+
+/* The use of register 0x84 is entirely unclear - it seems to control
+ some EPP counters ... currently we know about 3 different block
+ sizes: the standard 512 byte reads and writes, 12 byte writes and
+ 2048 byte reads (the last two being used in the CDrom drivers.
+*/
+
+static void epia_connect ( PIA *pi )
+
+{ pi->saved_r0 = r0();
+ pi->saved_r2 = r2();
+
+ w2(4); w0(0xa0); w0(0x50); w0(0xc0); w0(0x30); w0(0xa0); w0(0);
+ w2(1); w2(4);
+ if (pi->mode >= 3) {
+ w0(0xa); w2(1); w2(4); w0(0x82); w2(4); w2(0xc); w2(4);
+ w2(0x24); w2(0x26); w2(4);
+ }
+ WR(0x86,8);
+}
+
+static void epia_disconnect ( PIA *pi )
+
+{ /* WR(0x84,0x10); */
+ w0(pi->saved_r0);
+ w2(1); w2(4);
+ w0(pi->saved_r0);
+ w2(pi->saved_r2);
+}
+
+static void epia_read_block( PIA *pi, char * buf, int count )
+
+{ int k, ph, a, b;
+
+ switch (pi->mode) {
+
+ case 0: w0(0x81); w2(1); w2(3); w0(0xc1);
+ ph = 1;
+ for (k=0;k<count;k++) {
+ w2(2+ph); a = r1();
+ w2(4+ph); b = r1();
+ buf[k] = j44(a,b);
+ ph = 1 - ph;
+ }
+ w0(0); w2(4);
+ break;
+
+ case 1: w0(0x91); w2(1); w0(0x10); w2(3);
+ w0(0x51); w2(5); w0(0xd1);
+ ph = 1;
+ for (k=0;k<count;k++) {
+ w2(4+ph);
+ a = r1(); b = r2();
+ buf[k] = j53(a,b);
+ ph = 1 - ph;
+ }
+ w0(0); w2(4);
+ break;
+
+ case 2: w0(0x89); w2(1); w2(0x23); w2(0x21);
+ ph = 1;
+ for (k=0;k<count;k++) {
+ w2(0x24+ph);
+ buf[k] = r0();
+ ph = 1 - ph;
+ }
+ w2(6); w2(4);
+ break;
+
+ case 3: if (count > 512) WR(0x84,3);
+ w3(0); w2(0x24);
+ for (k=0;k<count;k++) buf[k] = r4();
+ w2(4); WR(0x84,0);
+ break;
+
+ case 4: if (count > 512) WR(0x84,3);
+ w3(0); w2(0x24);
+ for (k=0;k<count/2;k++) ((u16 *)buf)[k] = r4w();
+ w2(4); WR(0x84,0);
+ break;
+
+ case 5: if (count > 512) WR(0x84,3);
+ w3(0); w2(0x24);
+ for (k=0;k<count/4;k++) ((u32 *)buf)[k] = r4l();
+ w2(4); WR(0x84,0);
+ break;
+
+ }
+}
+
+static void epia_write_block( PIA *pi, char * buf, int count )
+
+{ int ph, k, last, d;
+
+ switch (pi->mode) {
+
+ case 0:
+ case 1:
+ case 2: w0(0xa1); w2(1); w2(3); w2(1); w2(5);
+ ph = 0; last = 0x8000;
+ for (k=0;k<count;k++) {
+ d = buf[k];
+ if (d != last) { last = d; w0(d); }
+ w2(4+ph);
+ ph = 1 - ph;
+ }
+ w2(7); w2(4);
+ break;
+
+ case 3: if (count < 512) WR(0x84,1);
+ w3(0x40);
+ for (k=0;k<count;k++) w4(buf[k]);
+ if (count < 512) WR(0x84,0);
+ break;
+
+ case 4: if (count < 512) WR(0x84,1);
+ w3(0x40);
+ for (k=0;k<count/2;k++) w4w(((u16 *)buf)[k]);
+ if (count < 512) WR(0x84,0);
+ break;
+
+ case 5: if (count < 512) WR(0x84,1);
+ w3(0x40);
+ for (k=0;k<count/4;k++) w4l(((u32 *)buf)[k]);
+ if (count < 512) WR(0x84,0);
+ break;
+
+ }
+
+}
+
+static int epia_test_proto( PIA *pi, char * scratch, int verbose )
+
+{ int j, k, f;
+ int e[2] = {0,0};
+
+ epia_connect(pi);
+ for (j=0;j<2;j++) {
+ WR(6,0xa0+j*0x10);
+ for (k=0;k<256;k++) {
+ WR(2,k^0xaa);
+ WR(3,k^0x55);
+ if (RR(2) != (k^0xaa)) e[j]++;
+ }
+ WR(2,1); WR(3,1);
+ }
+ epia_disconnect(pi);
+
+ f = 0;
+ epia_connect(pi);
+ WR(0x84,8);
+ epia_read_block(pi,scratch,512);
+ for (k=0;k<256;k++) {
+ if ((scratch[2*k] & 0xff) != ((k+1) & 0xff)) f++;
+ if ((scratch[2*k+1] & 0xff) != ((-2-k) & 0xff)) f++;
+ }
+ WR(0x84,0);
+ epia_disconnect(pi);
+
+ if (verbose) {
+ printk("%s: epia: port 0x%x, mode %d, test=(%d,%d,%d)\n",
+ pi->device,pi->port,pi->mode,e[0],e[1],f);
+ }
+
+ return (e[0] && e[1]) || f;
+
+}
+
+
+static void epia_log_adapter( PIA *pi, char * scratch, int verbose )
+
+{ char *mode_string[6] = {"4-bit","5/3","8-bit",
+ "EPP-8","EPP-16","EPP-32"};
+
+ printk("%s: epia %s, Shuttle EPIA at 0x%x, ",
+ pi->device,EPIA_VERSION,pi->port);
+ printk("mode %d (%s), delay %d\n",pi->mode,
+ mode_string[pi->mode],pi->delay);
+
+}
+
+static struct pi_protocol epia = {
+ .owner = THIS_MODULE,
+ .name = "epia",
+ .max_mode = 6,
+ .epp_first = 3,
+ .default_delay = 1,
+ .max_units = 1,
+ .write_regr = epia_write_regr,
+ .read_regr = epia_read_regr,
+ .write_block = epia_write_block,
+ .read_block = epia_read_block,
+ .connect = epia_connect,
+ .disconnect = epia_disconnect,
+ .test_proto = epia_test_proto,
+ .log_adapter = epia_log_adapter,
+};
+
+static int __init epia_init(void)
+{
+ return paride_register(&epia);
+}
+
+static void __exit epia_exit(void)
+{
+ paride_unregister(&epia);
+}
+
+MODULE_LICENSE("GPL");
+module_init(epia_init)
+module_exit(epia_exit)