diff options
Diffstat (limited to 'drivers/ata/pata_parport/fit2.c')
| -rw-r--r-- | drivers/ata/pata_parport/fit2.c | 131 |
1 files changed, 64 insertions, 67 deletions
diff --git a/drivers/ata/pata_parport/fit2.c b/drivers/ata/pata_parport/fit2.c index fd3b2ce426a5..6524f3033b1e 100644 --- a/drivers/ata/pata_parport/fit2.c +++ b/drivers/ata/pata_parport/fit2.c @@ -1,17 +1,16 @@ -/* - fit2.c (c) 1998 Grant R. Guenther <grant@torque.net> - Under the terms of the GNU General Public License. - - fit2.c is a low-level protocol driver for the older version - of the Fidelity International Technology parallel port adapter. - This adapter is used in their TransDisk 2000 and older TransDisk - 3000 portable hard-drives. As far as I can tell, this device - supports 4-bit mode _only_. - - Newer models of the FIT products use an enhanced protocol. - The "fit3" protocol module should support current drives. - -*/ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * (c) 1998 Grant R. Guenther <grant@torque.net> + * + * fit2.c is a low-level protocol driver for the older version + * of the Fidelity International Technology parallel port adapter. + * This adapter is used in their TransDisk 2000 and older TransDisk + * 3000 portable hard-drives. As far as I can tell, this device + * supports 4-bit mode _only_. + * + * Newer models of the FIT products use an enhanced protocol. + * The "fit3" protocol module should support current drives. + */ #include <linux/module.h> #include <linux/init.h> @@ -22,99 +21,97 @@ #include <asm/io.h> #include "pata_parport.h" -#define j44(a,b) (((a>>4)&0x0f)|(b&0xf0)) - -/* cont = 0 - access the IDE register file - cont = 1 - access the IDE command set +#define j44(a, b) (((a >> 4) & 0x0f) | (b & 0xf0)) -NB: The FIT adapter does not appear to use the control registers. -So, we map ALT_STATUS to STATUS and NO-OP writes to the device -control register - this means that IDE reset will not work on these -devices. - -*/ +/* + * cont = 0 - access the IDE register file + * cont = 1 - access the IDE command set + * + * NB: The FIT adapter does not appear to use the control registers. + * So, we map ALT_STATUS to STATUS and NO-OP writes to the device + * control register - this means that IDE reset will not work on these + * devices. + */ static void fit2_write_regr(struct pi_adapter *pi, int cont, int regr, int val) - -{ if (cont == 1) return; +{ + if (cont == 1) + return; w2(0xc); w0(regr); w2(4); w0(val); w2(5); w0(0); w2(4); } static int fit2_read_regr(struct pi_adapter *pi, int cont, int regr) - -{ int a, b, r; +{ + int a, b, r; if (cont) { - if (regr != 6) return 0xff; - r = 7; - } else r = regr + 0x10; + if (regr != 6) + return 0xff; + r = 7; + } else { + r = regr + 0x10; + } - w2(0xc); w0(r); w2(4); w2(5); - w0(0); a = r1(); - w0(1); b = r1(); + w2(0xc); w0(r); w2(4); w2(5); + w0(0); a = r1(); + w0(1); b = r1(); w2(4); - return j44(a,b); - + return j44(a, b); } static void fit2_read_block(struct pi_adapter *pi, char *buf, int count) - -{ int k, a, b, c, d; +{ + int k, a, b, c, d; w2(0xc); w0(0x10); - for (k=0;k<count/4;k++) { - + for (k = 0; k < count / 4; k++) { w2(4); w2(5); w0(0); a = r1(); w0(1); b = r1(); - w0(3); c = r1(); w0(2); d = r1(); - buf[4*k+0] = j44(a,b); - buf[4*k+1] = j44(d,c); - - w2(4); w2(5); - a = r1(); w0(3); b = r1(); - w0(1); c = r1(); w0(0); d = r1(); - buf[4*k+2] = j44(d,c); - buf[4*k+3] = j44(a,b); + w0(3); c = r1(); w0(2); d = r1(); + buf[4 * k + 0] = j44(a, b); + buf[4 * k + 1] = j44(d, c); + w2(4); w2(5); + a = r1(); w0(3); b = r1(); + w0(1); c = r1(); w0(0); d = r1(); + buf[4 * k + 2] = j44(d, c); + buf[4 * k + 3] = j44(a, b); } w2(4); - } static void fit2_write_block(struct pi_adapter *pi, char *buf, int count) +{ + int k; -{ int k; - - - w2(0xc); w0(0); - for (k=0;k<count/2;k++) { - w2(4); w0(buf[2*k]); - w2(5); w0(buf[2*k+1]); + w2(0xc); w0(0); + for (k = 0; k < count / 2; k++) { + w2(4); w0(buf[2 * k]); + w2(5); w0(buf[2 * k + 1]); } w2(4); } static void fit2_connect(struct pi_adapter *pi) - -{ pi->saved_r0 = r0(); - pi->saved_r2 = r2(); - w2(0xcc); +{ + pi->saved_r0 = r0(); + pi->saved_r2 = r2(); + w2(0xcc); } static void fit2_disconnect(struct pi_adapter *pi) - -{ w0(pi->saved_r0); - w2(pi->saved_r2); -} +{ + w0(pi->saved_r0); + w2(pi->saved_r2); +} static void fit2_log_adapter(struct pi_adapter *pi) - { dev_info(&pi->dev, "FIT 2000 adapter at 0x%x, delay %d\n", - pi->port, pi->delay); + pi->port, pi->delay); } |