diff options
Diffstat (limited to 'drivers/cpufreq')
| -rw-r--r-- | drivers/cpufreq/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/cpufreq/Kconfig.arm | 81 | ||||
| -rw-r--r-- | drivers/cpufreq/Makefile | 7 | ||||
| -rw-r--r-- | drivers/cpufreq/s3c2410-cpufreq.c | 155 | ||||
| -rw-r--r-- | drivers/cpufreq/s3c2412-cpufreq.c | 240 | ||||
| -rw-r--r-- | drivers/cpufreq/s3c2416-cpufreq.c | 492 | ||||
| -rw-r--r-- | drivers/cpufreq/s3c2440-cpufreq.c | 321 | ||||
| -rw-r--r-- | drivers/cpufreq/s3c24xx-cpufreq-debugfs.c | 163 | ||||
| -rw-r--r-- | drivers/cpufreq/s3c24xx-cpufreq.c | 648 | ||||
| -rw-r--r-- | drivers/cpufreq/sa1100-cpufreq.c | 206 | ||||
| -rw-r--r-- | drivers/cpufreq/sa1110-cpufreq.c | 6 |
11 files changed, 1 insertions, 2320 deletions
diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig index 2a84fc63371e..8466f78651fc 100644 --- a/drivers/cpufreq/Kconfig +++ b/drivers/cpufreq/Kconfig @@ -37,7 +37,7 @@ config CPU_FREQ_STAT choice prompt "Default CPUFreq governor" - default CPU_FREQ_DEFAULT_GOV_USERSPACE if ARM_SA1100_CPUFREQ || ARM_SA1110_CPUFREQ + default CPU_FREQ_DEFAULT_GOV_USERSPACE if ARM_SA1110_CPUFREQ default CPU_FREQ_DEFAULT_GOV_SCHEDUTIL if ARM64 || ARM default CPU_FREQ_DEFAULT_GOV_SCHEDUTIL if X86_INTEL_PSTATE && SMP default CPU_FREQ_DEFAULT_GOV_PERFORMANCE diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index 0a0352d8fa45..97acaa2136fd 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -189,84 +189,6 @@ config ARM_RASPBERRYPI_CPUFREQ If in doubt, say N. -config ARM_S3C_CPUFREQ - bool - help - Internal configuration node for common cpufreq on Samsung SoC - -config ARM_S3C24XX_CPUFREQ - bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)" - depends on ARCH_S3C24XX - select ARM_S3C_CPUFREQ - help - This enables the CPUfreq driver for the Samsung S3C24XX family - of CPUs. - - For details, take a look at <file:Documentation/cpu-freq>. - - If in doubt, say N. - -config ARM_S3C24XX_CPUFREQ_DEBUG - bool "Debug CPUfreq Samsung driver core" - depends on ARM_S3C24XX_CPUFREQ - help - Enable s3c_freq_dbg for the Samsung S3C CPUfreq core - -config ARM_S3C24XX_CPUFREQ_IODEBUG - bool "Debug CPUfreq Samsung driver IO timing" - depends on ARM_S3C24XX_CPUFREQ - help - Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core - -config ARM_S3C24XX_CPUFREQ_DEBUGFS - bool "Export debugfs for CPUFreq" - depends on ARM_S3C24XX_CPUFREQ && DEBUG_FS - help - Export status information via debugfs. - -config ARM_S3C2410_CPUFREQ - bool - depends on ARM_S3C24XX_CPUFREQ && CPU_S3C2410 - help - CPU Frequency scaling support for S3C2410 - -config ARM_S3C2412_CPUFREQ - bool - depends on ARM_S3C24XX_CPUFREQ && CPU_S3C2412 - default y - select S3C2412_IOTIMING - help - CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs. - -config ARM_S3C2416_CPUFREQ - bool "S3C2416 CPU Frequency scaling support" - depends on CPU_S3C2416 - help - This adds the CPUFreq driver for the Samsung S3C2416 and - S3C2450 SoC. The S3C2416 supports changing the rate of the - armdiv clock source and also entering a so called dynamic - voltage scaling mode in which it is possible to reduce the - core voltage of the CPU. - - If in doubt, say N. - -config ARM_S3C2416_CPUFREQ_VCORESCALE - bool "Allow voltage scaling for S3C2416 arm core" - depends on ARM_S3C2416_CPUFREQ && REGULATOR - help - Enable CPU voltage scaling when entering the dvs mode. - It uses information gathered through existing hardware and - tests but not documented in any datasheet. - - If in doubt, say N. - -config ARM_S3C2440_CPUFREQ - bool "S3C2440/S3C2442 CPU Frequency scaling support" - depends on ARM_S3C24XX_CPUFREQ && (CPU_S3C2440 || CPU_S3C2442) - default y - help - CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs. - config ARM_S3C64XX_CPUFREQ bool "Samsung S3C64XX" depends on CPU_S3C6410 @@ -286,9 +208,6 @@ config ARM_S5PV210_CPUFREQ If in doubt, say N. -config ARM_SA1100_CPUFREQ - bool - config ARM_SA1110_CPUFREQ bool diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index 32a7029e25ed..a19842fbd521 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -71,15 +71,8 @@ obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o obj-$(CONFIG_ARM_QCOM_CPUFREQ_HW) += qcom-cpufreq-hw.o obj-$(CONFIG_ARM_QCOM_CPUFREQ_NVMEM) += qcom-cpufreq-nvmem.o obj-$(CONFIG_ARM_RASPBERRYPI_CPUFREQ) += raspberrypi-cpufreq.o -obj-$(CONFIG_ARM_S3C2410_CPUFREQ) += s3c2410-cpufreq.o -obj-$(CONFIG_ARM_S3C2412_CPUFREQ) += s3c2412-cpufreq.o -obj-$(CONFIG_ARM_S3C2416_CPUFREQ) += s3c2416-cpufreq.o -obj-$(CONFIG_ARM_S3C2440_CPUFREQ) += s3c2440-cpufreq.o obj-$(CONFIG_ARM_S3C64XX_CPUFREQ) += s3c64xx-cpufreq.o -obj-$(CONFIG_ARM_S3C24XX_CPUFREQ) += s3c24xx-cpufreq.o -obj-$(CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS) += s3c24xx-cpufreq-debugfs.o obj-$(CONFIG_ARM_S5PV210_CPUFREQ) += s5pv210-cpufreq.o -obj-$(CONFIG_ARM_SA1100_CPUFREQ) += sa1100-cpufreq.o obj-$(CONFIG_ARM_SA1110_CPUFREQ) += sa1110-cpufreq.o obj-$(CONFIG_ARM_SCMI_CPUFREQ) += scmi-cpufreq.o obj-$(CONFIG_ARM_SCPI_CPUFREQ) += scpi-cpufreq.o diff --git a/drivers/cpufreq/s3c2410-cpufreq.c b/drivers/cpufreq/s3c2410-cpufreq.c deleted file mode 100644 index 5dcfbf0bfb74..000000000000 --- a/drivers/cpufreq/s3c2410-cpufreq.c +++ /dev/null @@ -1,155 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2006-2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 CPU Frequency scaling -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/cpufreq.h> -#include <linux/device.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/soc/samsung/s3c-cpufreq-core.h> -#include <linux/soc/samsung/s3c-pm.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#define S3C2410_CLKDIVN_PDIVN (1<<0) -#define S3C2410_CLKDIVN_HDIVN (1<<1) - -/* Note, 2410A has an extra mode for 1:4:4 ratio, bit 2 of CLKDIV */ - -static void s3c2410_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) -{ - u32 clkdiv = 0; - - if (cfg->divs.h_divisor == 2) - clkdiv |= S3C2410_CLKDIVN_HDIVN; - - if (cfg->divs.p_divisor != cfg->divs.h_divisor) - clkdiv |= S3C2410_CLKDIVN_PDIVN; - - s3c24xx_write_clkdivn(clkdiv); -} - -static int s3c2410_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg) -{ - unsigned long hclk, fclk, pclk; - unsigned int hdiv, pdiv; - unsigned long hclk_max; - - fclk = cfg->freq.fclk; - hclk_max = cfg->max.hclk; - - cfg->freq.armclk = fclk; - - s3c_freq_dbg("%s: fclk is %lu, max hclk %lu\n", - __func__, fclk, hclk_max); - - hdiv = (fclk > cfg->max.hclk) ? 2 : 1; - hclk = fclk / hdiv; - - if (hclk > cfg->max.hclk) { - s3c_freq_dbg("%s: hclk too big\n", __func__); - return -EINVAL; - } - - pdiv = (hclk > cfg->max.pclk) ? 2 : 1; - pclk = hclk / pdiv; - - if (pclk > cfg->max.pclk) { - s3c_freq_dbg("%s: pclk too big\n", __func__); - return -EINVAL; - } - - pdiv *= hdiv; - - /* record the result */ - cfg->divs.p_divisor = pdiv; - cfg->divs.h_divisor = hdiv; - - return 0; -} - -static struct s3c_cpufreq_info s3c2410_cpufreq_info = { - .max = { - .fclk = 200000000, - .hclk = 100000000, - .pclk = 50000000, - }, - - /* transition latency is about 5ms worst-case, so - * set 10ms to be sure */ - .latency = 10000000, - - .locktime_m = 150, - .locktime_u = 150, - .locktime_bits = 12, - - .need_pll = 1, - - .name = "s3c2410", - .calc_iotiming = s3c2410_iotiming_calc, - .set_iotiming = s3c2410_iotiming_set, - .get_iotiming = s3c2410_iotiming_get, - - .set_fvco = s3c2410_set_fvco, - .set_refresh = s3c2410_cpufreq_setrefresh, - .set_divs = s3c2410_cpufreq_setdivs, - .calc_divs = s3c2410_cpufreq_calcdivs, - - .debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs), -}; - -static int s3c2410_cpufreq_add(struct device *dev, - struct subsys_interface *sif) -{ - return s3c_cpufreq_register(&s3c2410_cpufreq_info); -} - -static struct subsys_interface s3c2410_cpufreq_interface = { - .name = "s3c2410_cpufreq", - .subsys = &s3c2410_subsys, - .add_dev = s3c2410_cpufreq_add, -}; - -static int __init s3c2410_cpufreq_init(void) -{ - return subsys_interface_register(&s3c2410_cpufreq_interface); -} -arch_initcall(s3c2410_cpufreq_init); - -static int s3c2410a_cpufreq_add(struct device *dev, - struct subsys_interface *sif) -{ - /* alter the maximum freq settings for S3C2410A. If a board knows - * it only has a maximum of 200, then it should register its own - * limits. */ - - s3c2410_cpufreq_info.max.fclk = 266000000; - s3c2410_cpufreq_info.max.hclk = 133000000; - s3c2410_cpufreq_info.max.pclk = 66500000; - s3c2410_cpufreq_info.name = "s3c2410a"; - - return s3c2410_cpufreq_add(dev, sif); -} - -static struct subsys_interface s3c2410a_cpufreq_interface = { - .name = "s3c2410a_cpufreq", - .subsys = &s3c2410a_subsys, - .add_dev = s3c2410a_cpufreq_add, -}; - -static int __init s3c2410a_cpufreq_init(void) -{ - return subsys_interface_register(&s3c2410a_cpufreq_interface); -} -arch_initcall(s3c2410a_cpufreq_init); diff --git a/drivers/cpufreq/s3c2412-cpufreq.c b/drivers/cpufreq/s3c2412-cpufreq.c deleted file mode 100644 index 5945945ead7c..000000000000 --- a/drivers/cpufreq/s3c2412-cpufreq.c +++ /dev/null @@ -1,240 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2412 CPU Frequency scalling -*/ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/cpufreq.h> -#include <linux/device.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/soc/samsung/s3c-cpufreq-core.h> -#include <linux/soc/samsung/s3c-pm.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#define S3C2412_CLKDIVN_PDIVN (1<<2) -#define S3C2412_CLKDIVN_HDIVN_MASK (3<<0) -#define S3C2412_CLKDIVN_ARMDIVN (1<<3) -#define S3C2412_CLKDIVN_DVSEN (1<<4) -#define S3C2412_CLKDIVN_HALFHCLK (1<<5) -#define S3C2412_CLKDIVN_USB48DIV (1<<6) -#define S3C2412_CLKDIVN_UARTDIV_MASK (15<<8) -#define S3C2412_CLKDIVN_UARTDIV_SHIFT (8) -#define S3C2412_CLKDIVN_I2SDIV_MASK (15<<12) -#define S3C2412_CLKDIVN_I2SDIV_SHIFT (12) -#define S3C2412_CLKDIVN_CAMDIV_MASK (15<<16) -#define S3C2412_CLKDIVN_CAMDIV_SHIFT (16) - -/* our clock resources. */ -static struct clk *xtal; -static struct clk *fclk; -static struct clk *hclk; -static struct clk *armclk; - -/* HDIV: 1, 2, 3, 4, 6, 8 */ - -static int s3c2412_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg) -{ - unsigned int hdiv, pdiv, armdiv, dvs; - unsigned long hclk, fclk, armclk, armdiv_clk; - unsigned long hclk_max; - - fclk = cfg->freq.fclk; - armclk = cfg->freq.armclk; - hclk_max = cfg->max.hclk; - - /* We can't run hclk above armclk as at the best we have to - * have armclk and hclk in dvs mode. */ - - if (hclk_max > armclk) - hclk_max = armclk; - - s3c_freq_dbg("%s: fclk=%lu, armclk=%lu, hclk_max=%lu\n", - __func__, fclk, armclk, hclk_max); - s3c_freq_dbg("%s: want f=%lu, arm=%lu, h=%lu, p=%lu\n", - __func__, cfg->freq.fclk, cfg->freq.armclk, - cfg->freq.hclk, cfg->freq.pclk); - - armdiv = fclk / armclk; - - if (armdiv < 1) - armdiv = 1; - if (armdiv > 2) - armdiv = 2; - - cfg->divs.arm_divisor = armdiv; - armdiv_clk = fclk / armdiv; - - hdiv = armdiv_clk / hclk_max; - if (hdiv < 1) - hdiv = 1; - - cfg->freq.hclk = hclk = armdiv_clk / hdiv; - - /* set dvs depending on whether we reached armclk or not. */ - cfg->divs.dvs = dvs = armclk < armdiv_clk; - - /* update the actual armclk we achieved. */ - cfg->freq.armclk = dvs ? hclk : armdiv_clk; - - s3c_freq_dbg("%s: armclk %lu, hclk %lu, armdiv %d, hdiv %d, dvs %d\n", - __func__, armclk, hclk, armdiv, hdiv, cfg->divs.dvs); - - if (hdiv > 4) - goto invalid; - - pdiv = (hclk > cfg->max.pclk) ? 2 : 1; - - if ((hclk / pdiv) > cfg->max.pclk) - pdiv++; - - cfg->freq.pclk = hclk / pdiv; - - s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv); - - if (pdiv > 2) - goto invalid; - - pdiv *= hdiv; - - /* store the result, and then return */ - - cfg->divs.h_divisor = hdiv * armdiv; - cfg->divs.p_divisor = pdiv * armdiv; - - return 0; - -invalid: - return -EINVAL; -} - -static void s3c2412_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) -{ - unsigned long clkdiv; - unsigned long olddiv; - - olddiv = clkdiv = s3c24xx_read_clkdivn(); - - /* clear off current clock info */ - - clkdiv &= ~S3C2412_CLKDIVN_ARMDIVN; - clkdiv &= ~S3C2412_CLKDIVN_HDIVN_MASK; - clkdiv &= ~S3C2412_CLKDIVN_PDIVN; - - if (cfg->divs.arm_divisor == 2) - clkdiv |= S3C2412_CLKDIVN_ARMDIVN; - - clkdiv |= ((cfg->divs.h_divisor / cfg->divs.arm_divisor) - 1); - - if (cfg->divs.p_divisor != cfg->divs.h_divisor) - clkdiv |= S3C2412_CLKDIVN_PDIVN; - - s3c_freq_dbg("%s: div %08lx => %08lx\n", __func__, olddiv, clkdiv); - s3c24xx_write_clkdivn(clkdiv); - - clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk); -} - -/* set the default cpu frequency information, based on an 200MHz part - * as we have no other way of detecting the speed rating in software. - */ - -static struct s3c_cpufreq_info s3c2412_cpufreq_info = { - .max = { - .fclk = 200000000, - .hclk = 100000000, - .pclk = 50000000, - }, - - .latency = 5000000, /* 5ms */ - - .locktime_m = 150, - .locktime_u = 150, - .locktime_bits = 16, - - .name = "s3c2412", - .set_refresh = s3c2412_cpufreq_setrefresh, - .set_divs = s3c2412_cpufreq_setdivs, - .calc_divs = s3c2412_cpufreq_calcdivs, - - .calc_iotiming = s3c2412_iotiming_calc, - .set_iotiming = s3c2412_iotiming_set, - .get_iotiming = s3c2412_iotiming_get, - - .debug_io_show = s3c_cpufreq_debugfs_call(s3c2412_iotiming_debugfs), -}; - -static int s3c2412_cpufreq_add(struct device *dev, - struct subsys_interface *sif) -{ - unsigned long fclk_rate; - - hclk = clk_get(NULL, "hclk"); - if (IS_ERR(hclk)) { - pr_err("cannot find hclk clock\n"); - return -ENOENT; - } - - fclk = clk_get(NULL, "fclk"); - if (IS_ERR(fclk)) { - pr_err("cannot find fclk clock\n"); - goto err_fclk; - } - - fclk_rate = clk_get_rate(fclk); - if (fclk_rate > 200000000) { - pr_info("fclk %ld MHz, assuming 266MHz capable part\n", - fclk_rate / 1000000); - s3c2412_cpufreq_info.max.fclk = 266000000; - s3c2412_cpufreq_info.max.hclk = 133000000; - s3c2412_cpufreq_info.max.pclk = 66000000; - } - - armclk = clk_get(NULL, "armclk"); - if (IS_ERR(armclk)) { - pr_err("cannot find arm clock\n"); - goto err_armclk; - } - - xtal = clk_get(NULL, "xtal"); - if (IS_ERR(xtal)) { - pr_err("cannot find xtal clock\n"); - goto err_xtal; - } - - return s3c_cpufreq_register(&s3c2412_cpufreq_info); - -err_xtal: - clk_put(armclk); -err_armclk: - clk_put(fclk); -err_fclk: - clk_put(hclk); - - return -ENOENT; -} - -static struct subsys_interface s3c2412_cpufreq_interface = { - .name = "s3c2412_cpufreq", - .subsys = &s3c2412_subsys, - .add_dev = s3c2412_cpufreq_add, -}; - -static int s3c2412_cpufreq_init(void) -{ - return subsys_interface_register(&s3c2412_cpufreq_interface); -} -arch_initcall(s3c2412_cpufreq_init); diff --git a/drivers/cpufreq/s3c2416-cpufreq.c b/drivers/cpufreq/s3c2416-cpufreq.c deleted file mode 100644 index 5c221bc90210..000000000000 --- a/drivers/cpufreq/s3c2416-cpufreq.c +++ /dev/null @@ -1,492 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * S3C2416/2450 CPUfreq Support - * - * Copyright 2011 Heiko Stuebner <heiko@sntech.de> - * - * based on s3c64xx_cpufreq.c - * - * Copyright 2009 Wolfson Microelectronics plc - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/regulator/consumer.h> -#include <linux/reboot.h> -#include <linux/module.h> - -static DEFINE_MUTEX(cpufreq_lock); - -struct s3c2416_data { - struct clk *armdiv; - struct clk *armclk; - struct clk *hclk; - - unsigned long regulator_latency; -#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE - struct regulator *vddarm; -#endif - - struct cpufreq_frequency_table *freq_table; - - bool is_dvs; - bool disable_dvs; -}; - -static struct s3c2416_data s3c2416_cpufreq; - -struct s3c2416_dvfs { - unsigned int vddarm_min; - unsigned int vddarm_max; -}; - -/* pseudo-frequency for dvs mode */ -#define FREQ_DVS 132333 - -/* frequency to sleep and reboot in - * it's essential to leave dvs, as some boards do not reconfigure the - * regulator on reboot - */ -#define FREQ_SLEEP 133333 - -/* Sources for the ARMCLK */ -#define SOURCE_HCLK 0 -#define SOURCE_ARMDIV 1 - -#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE -/* S3C2416 only supports changing the voltage in the dvs-mode. - * Voltages down to 1.0V seem to work, so we take what the regulator - * can get us. - */ -static struct s3c2416_dvfs s3c2416_dvfs_table[] = { - [SOURCE_HCLK] = { 950000, 1250000 }, - [SOURCE_ARMDIV] = { 1250000, 1350000 }, -}; -#endif - -static struct cpufreq_frequency_table s3c2416_freq_table[] = { - { 0, SOURCE_HCLK, FREQ_DVS }, - { 0, SOURCE_ARMDIV, 133333 }, - { 0, SOURCE_ARMDIV, 266666 }, - { 0, SOURCE_ARMDIV, 400000 }, - { 0, 0, CPUFREQ_TABLE_END }, -}; - -static struct cpufreq_frequency_table s3c2450_freq_table[] = { - { 0, SOURCE_HCLK, FREQ_DVS }, - { 0, SOURCE_ARMDIV, 133500 }, - { 0, SOURCE_ARMDIV, 267000 }, - { 0, SOURCE_ARMDIV, 534000 }, - { 0, 0, CPUFREQ_TABLE_END }, -}; - -static unsigned int s3c2416_cpufreq_get_speed(unsigned int cpu) -{ - struct s3c2416_data *s3c_freq = &s3c2416_cpufreq; - - if (cpu != 0) - return 0; - - /* return our pseudo-frequency when in dvs mode */ - if (s3c_freq->is_dvs) - return FREQ_DVS; - - return clk_get_rate(s3c_freq->armclk) / 1000; -} - -static int s3c2416_cpufreq_set_armdiv(struct s3c2416_data *s3c_freq, - unsigned int freq) -{ - int ret; - - if (clk_get_rate(s3c_freq->armdiv) / 1000 != freq) { - ret = clk_set_rate(s3c_freq->armdiv, freq * 1000); - if (ret < 0) { - pr_err("cpufreq: Failed to set armdiv rate %dkHz: %d\n", - freq, ret); - return ret; - } - } - - return 0; -} - -static int s3c2416_cpufreq_enter_dvs(struct s3c2416_data *s3c_freq, int idx) -{ -#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE - struct s3c2416_dvfs *dvfs; -#endif - int ret; - - if (s3c_freq->is_dvs) { - pr_debug("cpufreq: already in dvs mode, nothing to do\n"); - return 0; - } - - pr_debug("cpufreq: switching armclk to hclk (%lukHz)\n", - clk_get_rate(s3c_freq->hclk) / 1000); - ret = clk_set_parent(s3c_freq->armclk, s3c_freq->hclk); - if (ret < 0) { - pr_err("cpufreq: Failed to switch armclk to hclk: %d\n", ret); - return ret; - } - -#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE - /* changing the core voltage is only allowed when in dvs mode */ - if (s3c_freq->vddarm) { - dvfs = &s3c2416_dvfs_table[idx]; - - pr_debug("cpufreq: setting regulator to %d-%d\n", - dvfs->vddarm_min, dvfs->vddarm_max); - ret = regulator_set_voltage(s3c_freq->vddarm, - dvfs->vddarm_min, - dvfs->vddarm_max); - - /* when lowering the voltage failed, there is nothing to do */ - if (ret != 0) - pr_err("cpufreq: Failed to set VDDARM: %d\n", ret); - } -#endif - - s3c_freq->is_dvs = 1; - - return 0; -} - -static int s3c2416_cpufreq_leave_dvs(struct s3c2416_data *s3c_freq, int idx) -{ -#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE - struct s3c2416_dvfs *dvfs; -#endif - int ret; - - if (!s3c_freq->is_dvs) { - pr_debug("cpufreq: not in dvs mode, so can't leave\n"); - return 0; - } - -#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE - if (s3c_freq->vddarm) { - dvfs = &s3c2416_dvfs_table[idx]; - - pr_debug("cpufreq: setting regulator to %d-%d\n", - dvfs->vddarm_min, dvfs->vddarm_max); - ret = regulator_set_voltage(s3c_freq->vddarm, - dvfs->vddarm_min, - dvfs->vddarm_max); - if (ret != 0) { - pr_err("cpufreq: Failed to set VDDARM: %d\n", ret); - return ret; - } - } -#endif - - /* force armdiv to hclk frequency for transition from dvs*/ - if (clk_get_rate(s3c_freq->armdiv) > clk_get_rate(s3c_freq->hclk)) { - pr_debug("cpufreq: force armdiv to hclk frequency (%lukHz)\n", - clk_get_rate(s3c_freq->hclk) / 1000); - ret = s3c2416_cpufreq_set_armdiv(s3c_freq, - clk_get_rate(s3c_freq->hclk) / 1000); - if (ret < 0) { - pr_err("cpufreq: Failed to set the armdiv to %lukHz: %d\n", - clk_get_rate(s3c_freq->hclk) / 1000, ret); - return ret; - } - } - - pr_debug("cpufreq: switching armclk parent to armdiv (%lukHz)\n", - clk_get_rate(s3c_freq->armdiv) / 1000); - - ret = clk_set_parent(s3c_freq->armclk, s3c_freq->armdiv); - if (ret < 0) { - pr_err("cpufreq: Failed to switch armclk clock parent to armdiv: %d\n", - ret); - return ret; - } - - s3c_freq->is_dvs = 0; - - return 0; -} - -static int s3c2416_cpufreq_set_target(struct cpufreq_policy *policy, - unsigned int index) -{ - struct s3c2416_data *s3c_freq = &s3c2416_cpufreq; - unsigned int new_freq; - int idx, ret, to_dvs = 0; - - mutex_lock(&cpufreq_lock); - - idx = s3c_freq->freq_table[index].driver_data; - - if (idx == SOURCE_HCLK) - to_dvs = 1; - - /* switching to dvs when it's not allowed */ - if (to_dvs && s3c_freq->disable_dvs) { - pr_debug("cpufreq: entering dvs mode not allowed\n"); - ret = -EINVAL; - goto out; - } - - /* When leavin dvs mode, always switch the armdiv to the hclk rate - * The S3C2416 has stability issues when switching directly to - * higher frequencies. - */ - new_freq = (s3c_freq->is_dvs && !to_dvs) - ? clk_get_rate(s3c_freq->hclk) / 1000 - : s3c_freq->freq_table[index].frequency; - - if (to_dvs) { - pr_debug("cpufreq: enter dvs\n"); - ret = s3c2416_cpufreq_enter_dvs(s3c_freq, idx); - } else if (s3c_freq->is_dvs) { - pr_debug("cpufreq: leave dvs\n"); - ret = s3c2416_cpufreq_leave_dvs(s3c_freq, idx); - } else { - pr_debug("cpufreq: change armdiv to %dkHz\n", new_freq); - ret = s3c2416_cpufreq_set_armdiv(s3c_freq, new_freq); - } - -out: - mutex_unlock(&cpufreq_lock); - - return ret; -} - -#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE -static void s3c2416_cpufreq_cfg_regulator(struct s3c2416_data *s3c_freq) -{ - int count, v, i, found; - struct cpufreq_frequency_table *pos; - struct s3c2416_dvfs *dvfs; - - count = regulator_count_voltages(s3c_freq->vddarm); - if (count < 0) { - pr_err("cpufreq: Unable to check supported voltages\n"); - return; - } - - if (!count) - goto out; - - cpufreq_for_each_valid_entry(pos, s3c_freq->freq_table) { - dvfs = &s3c2416_dvfs_table[pos->driver_data]; - found = 0; - - /* Check only the min-voltage, more is always ok on S3C2416 */ - for (i = 0; i < count; i++) { - v = regulator_list_voltage(s3c_freq->vddarm, i); - if (v >= dvfs->vddarm_min) - found = 1; - } - - if (!found) { - pr_debug("cpufreq: %dkHz unsupported by regulator\n", - pos->frequency); - pos->frequency = CPUFREQ_ENTRY_INVALID; - } - } - -out: - /* Guessed */ - s3c_freq->regulator_latency = 1 * 1000 * 1000; -} -#endif - -static int s3c2416_cpufreq_reboot_notifier_evt(struct notifier_block *this, - unsigned long event, void *ptr) -{ - struct s3c2416_data *s3c_freq = &s3c2416_cpufreq; - int ret; - struct cpufreq_policy *policy; - - mutex_lock(&cpufreq_lock); - - /* disable further changes */ - s3c_freq->disable_dvs = 1; - - mutex_unlock(&cpufreq_lock); - - /* some boards don't reconfigure the regulator on reboot, which - * could lead to undervolting the cpu when the clock is reset. - * Therefore we always leave the DVS mode on reboot. - */ - if (s3c_freq->is_dvs) { - pr_debug("cpufreq: leave dvs on reboot\n"); - - policy = cpufreq_cpu_get(0); - if (!policy) { - pr_debug("cpufreq: get no policy for cpu0\n"); - return NOTIFY_BAD; - } - - ret = cpufreq_driver_target(policy, FREQ_SLEEP, 0); - cpufreq_cpu_put(policy); - - if (ret < 0) - return NOTIFY_BAD; - } - - return NOTIFY_DONE; -} - -static struct notifier_block s3c2416_cpufreq_reboot_notifier = { - .notifier_call = s3c2416_cpufreq_reboot_notifier_evt, -}; - -static int s3c2416_cpufreq_driver_init(struct cpufreq_policy *policy) -{ - struct s3c2416_data *s3c_freq = &s3c2416_cpufreq; - struct cpufreq_frequency_table *pos; - struct clk *msysclk; - unsigned long rate; - int ret; - - if (policy->cpu != 0) - return -EINVAL; - - msysclk = clk_get(NULL, "msysclk"); - if (IS_ERR(msysclk)) { - ret = PTR_ERR(msysclk); - pr_err("cpufreq: Unable to obtain msysclk: %d\n", ret); - return ret; - } - - /* - * S3C2416 and S3C2450 share the same processor-ID and also provide no - * other means to distinguish them other than through the rate of - * msysclk. On S3C2416 msysclk runs at 800MHz and on S3C2450 at 533MHz. - */ - rate = clk_get_rate(msysclk); - if (rate == 800 * 1000 * 1000) { - pr_info("cpufreq: msysclk running at %lukHz, using S3C2416 frequency table\n", - rate / 1000); - s3c_freq->freq_table = s3c2416_freq_table; - policy->cpuinfo.max_freq = 400000; - } else if (rate / 1000 == 534000) { - pr_info("cpufreq: msysclk running at %lukHz, using S3C2450 frequency table\n", - rate / 1000); - s3c_freq->freq_table = s3c2450_freq_table; - policy->cpuinfo.max_freq = 534000; - } - - /* not needed anymore */ - clk_put(msysclk); - - if (s3c_freq->freq_table == NULL) { - pr_err("cpufreq: No frequency information for this CPU, msysclk at %lukHz\n", - rate / 1000); - return -ENODEV; - } - - s3c_freq->is_dvs = 0; - - s3c_freq->armdiv = clk_get(NULL, "armdiv"); - if (IS_ERR(s3c_freq->armdiv)) { - ret = PTR_ERR(s3c_freq->armdiv); - pr_err("cpufreq: Unable to obtain ARMDIV: %d\n", ret); - return ret; - } - - s3c_freq->hclk = clk_get(NULL, "hclk"); - if (IS_ERR(s3c_freq->hclk)) { - ret = PTR_ERR(s3c_freq->hclk); - pr_err("cpufreq: Unable to obtain HCLK: %d\n", ret); - goto err_hclk; - } - - /* chech hclk rate, we only support the common 133MHz for now - * hclk could also run at 66MHz, but this not often used - */ - rate = clk_get_rate(s3c_freq->hclk); - if (rate < 133 * 1000 * 1000) { - pr_err("cpufreq: HCLK not at 133MHz\n"); - ret = -EINVAL; - goto err_armclk; - } - - s3c_freq->armclk = clk_get(NULL, "armclk"); - if (IS_ERR(s3c_freq->armclk)) { - ret = PTR_ERR(s3c_freq->armclk); - pr_err("cpufreq: Unable to obtain ARMCLK: %d\n", ret); - goto err_armclk; - } - -#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE - s3c_freq->vddarm = regulator_get(NULL, "vddarm"); - if (IS_ERR(s3c_freq->vddarm)) { - ret = PTR_ERR(s3c_freq->vddarm); - pr_err("cpufreq: Failed to obtain VDDARM: %d\n", ret); - goto err_vddarm; - } - - s3c2416_cpufreq_cfg_regulator(s3c_freq); -#else - s3c_freq->regulator_latency = 0; -#endif - - cpufreq_for_each_entry(pos, s3c_freq->freq_table) { - /* special handling for dvs mode */ - if (pos->driver_data == 0) { - if (!s3c_freq->hclk) { - pr_debug("cpufreq: %dkHz unsupported as it would need unavailable dvs mode\n", - pos->frequency); - pos->frequency = CPUFREQ_ENTRY_INVALID; - } else { - continue; - } - } - - /* Check for frequencies we can generate */ - rate = clk_round_rate(s3c_freq->armdiv, - pos->frequency * 1000); - rate /= 1000; - if (rate != pos->frequency) { - pr_debug("cpufreq: %dkHz unsupported by clock (clk_round_rate return %lu)\n", - pos->frequency, rate); - pos->frequency = CPUFREQ_ENTRY_INVALID; - } - } - - /* Datasheet says PLL stabalisation time must be at least 300us, - * so but add some fudge. (reference in LOCKCON0 register description) - */ - cpufreq_generic_init(policy, s3c_freq->freq_table, - (500 * 1000) + s3c_freq->regulator_latency); - register_reboot_notifier(&s3c2416_cpufreq_reboot_notifier); - - return 0; - -#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE -err_vddarm: - clk_put(s3c_freq->armclk); -#endif -err_armclk: - clk_put(s3c_freq->hclk); -err_hclk: - clk_put(s3c_freq->armdiv); - - return ret; -} - -static struct cpufreq_driver s3c2416_cpufreq_driver = { - .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK, - .verify = cpufreq_generic_frequency_table_verify, - .target_index = s3c2416_cpufreq_set_target, - .get = s3c2416_cpufreq_get_speed, - .init = s3c2416_cpufreq_driver_init, - .name = "s3c2416", - .attr = cpufreq_generic_attr, -}; - -static int __init s3c2416_cpufreq_init(void) -{ - return cpufreq_register_driver(&s3c2416_cpufreq_driver); -} -module_init(s3c2416_cpufreq_init); diff --git a/drivers/cpufreq/s3c2440-cpufreq.c b/drivers/cpufreq/s3c2440-cpufreq.c deleted file mode 100644 index 2011fb9c03a4..000000000000 --- a/drivers/cpufreq/s3c2440-cpufreq.c +++ /dev/null @@ -1,321 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2006-2009 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * Vincent Sanders <vince@simtec.co.uk> - * - * S3C2440/S3C2442 CPU Frequency scaling -*/ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/cpufreq.h> -#include <linux/device.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/soc/samsung/s3c-cpufreq-core.h> -#include <linux/soc/samsung/s3c-pm.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#define S3C2440_CLKDIVN_PDIVN (1<<0) -#define S3C2440_CLKDIVN_HDIVN_MASK (3<<1) -#define S3C2440_CLKDIVN_HDIVN_1 (0<<1) -#define S3C2440_CLKDIVN_HDIVN_2 (1<<1) -#define S3C2440_CLKDIVN_HDIVN_4_8 (2<<1) -#define S3C2440_CLKDIVN_HDIVN_3_6 (3<<1) -#define S3C2440_CLKDIVN_UCLK (1<<3) - -#define S3C2440_CAMDIVN_CAMCLK_MASK (0xf<<0) -#define S3C2440_CAMDIVN_CAMCLK_SEL (1<<4) -#define S3C2440_CAMDIVN_HCLK3_HALF (1<<8) -#define S3C2440_CAMDIVN_HCLK4_HALF (1<<9) -#define S3C2440_CAMDIVN_DVSEN (1<<12) - -#define S3C2442_CAMDIVN_CAMCLK_DIV3 (1<<5) - -static struct clk *xtal; -static struct clk *fclk; -static struct clk *hclk; -static struct clk *armclk; - -/* HDIV: 1, 2, 3, 4, 6, 8 */ - -static inline int within_khz(unsigned long a, unsigned long b) -{ - long diff = a - b; - - return (diff >= -1000 && diff <= 1000); -} - -/** - * s3c2440_cpufreq_calcdivs - calculate divider settings - * @cfg: The cpu frequency settings. - * - * Calcualte the divider values for the given frequency settings - * specified in @cfg. The values are stored in @cfg for later use - * by the relevant set routine if the request settings can be reached. - */ -static int s3c2440_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg) -{ - unsigned int hdiv, pdiv; - unsigned long hclk, fclk, armclk; - unsigned long hclk_max; - - fclk = cfg->freq.fclk; - armclk = cfg->freq.armclk; - hclk_max = cfg->max.hclk; - - s3c_freq_dbg("%s: fclk is %lu, armclk %lu, max hclk %lu\n", - __func__, fclk, armclk, hclk_max); - - if (armclk > fclk) { - pr_warn("%s: armclk > fclk\n", __func__); - armclk = fclk; - } - - /* if we are in DVS, we need HCLK to be <= ARMCLK */ - if (armclk < fclk && armclk < hclk_max) - hclk_max = armclk; - - for (hdiv = 1; hdiv < 9; hdiv++) { - if (hdiv == 5 || hdiv == 7) - hdiv++; - - hclk = (fclk / hdiv); - if (hclk <= hclk_max || within_khz(hclk, hclk_max)) - break; - } - - s3c_freq_dbg("%s: hclk %lu, div %d\n", __func__, hclk, hdiv); - - if (hdiv > 8) - goto invalid; - - pdiv = (hclk > cfg->max.pclk) ? 2 : 1; - - if ((hclk / pdiv) > cfg->max.pclk) - pdiv++; - - s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv); - - if (pdiv > 2) - goto invalid; - - pdiv *= hdiv; - - /* calculate a valid armclk */ - - if (armclk < hclk) - armclk = hclk; - - /* if we're running armclk lower than fclk, this really means - * that the system should go into dvs mode, which means that - * armclk is connected to hclk. */ - if (armclk < fclk) { - cfg->divs.dvs = 1; - armclk = hclk; - } else - cfg->divs.dvs = 0; - - cfg->freq.armclk = armclk; - - /* store the result, and then return */ - - cfg->divs.h_divisor = hdiv; - cfg->divs.p_divisor = pdiv; - - return 0; - - invalid: - return -EINVAL; -} - -#define CAMDIVN_HCLK_HALF (S3C2440_CAMDIVN_HCLK3_HALF | \ - S3C2440_CAMDIVN_HCLK4_HALF) - -/** - * s3c2440_cpufreq_setdivs - set the cpu frequency divider settings - * @cfg: The cpu frequency settings. - * - * Set the divisors from the settings in @cfg, which where generated - * during the calculation phase by s3c2440_cpufreq_calcdivs(). - */ -static void s3c2440_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) -{ - unsigned long clkdiv, camdiv; - - s3c_freq_dbg("%s: divisors: h=%d, p=%d\n", __func__, - cfg->divs.h_divisor, cfg->divs.p_divisor); - - clkdiv = s3c24xx_read_clkdivn(); - camdiv = s3c2440_read_camdivn(); - - clkdiv &= ~(S3C2440_CLKDIVN_HDIVN_MASK | S3C2440_CLKDIVN_PDIVN); - camdiv &= ~CAMDIVN_HCLK_HALF; - - switch (cfg->divs.h_divisor) { - case 1: - clkdiv |= S3C2440_CLKDIVN_HDIVN_1; - break; - - case 2: - clkdiv |= S3C2440_CLKDIVN_HDIVN_2; - break; - - case 6: - camdiv |= S3C2440_CAMDIVN_HCLK3_HALF; - fallthrough; - case 3: - clkdiv |= S3C2440_CLKDIVN_HDIVN_3_6; - break; - - case 8: - camdiv |= S3C2440_CAMDIVN_HCLK4_HALF; - fallthrough; - case 4: - clkdiv |= S3C2440_CLKDIVN_HDIVN_4_8; - break; - - default: - BUG(); /* we don't expect to get here. */ - } - - if (cfg->divs.p_divisor != cfg->divs.h_divisor) - clkdiv |= S3C2440_CLKDIVN_PDIVN; - - /* todo - set pclk. */ - - /* Write the divisors first with hclk intentionally halved so that - * when we write clkdiv we will under-frequency instead of over. We - * then make a short delay and remove the hclk halving if necessary. - */ - - s3c2440_write_camdivn(camdiv | CAMDIVN_HCLK_HALF); - s3c24xx_write_clkdivn(clkdiv); - - ndelay(20); - s3c2440_write_camdivn(camdiv); - - clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk); -} - -static int run_freq_for(unsigned long max_hclk, unsigned long fclk, - int *divs, - struct cpufreq_frequency_table *table, - size_t table_size) -{ - unsigned long freq; - int index = 0; - int div; - - for (div = *divs; div > 0; div = *divs++) { - freq = fclk / div; - - if (freq > max_hclk && div != 1) - continue; - - freq /= 1000; /* table is in kHz */ - index = s3c_cpufreq_addfreq(table, index, table_size, freq); - if (index < 0) - break; - } - - return index; -} - -static int hclk_divs[] = { 1, 2, 3, 4, 6, 8, -1 }; - -static int s3c2440_cpufreq_calctable(struct s3c_cpufreq_config *cfg, - struct cpufreq_frequency_table *table, - size_t table_size) -{ - int ret; - - WARN_ON(cfg->info == NULL); - WARN_ON(cfg->board == NULL); - - ret = run_freq_for(cfg->info->max.hclk, - cfg->info->max.fclk, - hclk_divs, - table, table_size); - - s3c_freq_dbg("%s: returning %d\n", __func__, ret); - - return ret; -} - -static struct s3c_cpufreq_info s3c2440_cpufreq_info = { - .max = { - .fclk = 400000000, - .hclk = 133333333, - .pclk = 66666666, - }, - - .locktime_m = 300, - .locktime_u = 300, - .locktime_bits = 16, - - .name = "s3c244x", - .calc_iotiming = s3c2410_iotiming_calc, - .set_iotiming = s3c2410_iotiming_set, - .get_iotiming = s3c2410_iotiming_get, - .set_fvco = s3c2410_set_fvco, - - .set_refresh = s3c2410_cpufreq_setrefresh, - .set_divs = s3c2440_cpufreq_setdivs, - .calc_divs = s3c2440_cpufreq_calcdivs, - .calc_freqtable = s3c2440_cpufreq_calctable, - - .debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs), -}; - -static int s3c2440_cpufreq_add(struct device *dev, - struct subsys_interface *sif) -{ - xtal = s3c_cpufreq_clk_get(NULL, "xtal"); - hclk = s3c_cpufreq_clk_get(NULL, "hclk"); - fclk = s3c_cpufreq_clk_get(NULL, "fclk"); - armclk = s3c_cpufreq_clk_get(NULL, "armclk"); - - if (IS_ERR(xtal) || IS_ERR(hclk) || IS_ERR(fclk) || IS_ERR(armclk)) { - pr_err("%s: failed to get clocks\n", __func__); - return -ENOENT; - } - - return s3c_cpufreq_register(&s3c2440_cpufreq_info); -} - -static struct subsys_interface s3c2440_cpufreq_interface = { - .name = "s3c2440_cpufreq", - .subsys = &s3c2440_subsys, - .add_dev = s3c2440_cpufreq_add, -}; - -static int s3c2440_cpufreq_init(void) -{ - return subsys_interface_register(&s3c2440_cpufreq_interface); -} - -/* arch_initcall adds the clocks we need, so use subsys_initcall. */ -subsys_initcall(s3c2440_cpufreq_init); - -static struct subsys_interface s3c2442_cpufreq_interface = { - .name = "s3c2442_cpufreq", - .subsys = &s3c2442_subsys, - .add_dev = s3c2440_cpufreq_add, -}; - -static int s3c2442_cpufreq_init(void) -{ - return subsys_interface_register(&s3c2442_cpufreq_interface); -} -subsys_initcall(s3c2442_cpufreq_init); diff --git a/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c b/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c deleted file mode 100644 index 93971dfe7c75..000000000000 --- a/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c +++ /dev/null @@ -1,163 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2009 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C24XX CPU Frequency scaling - debugfs status support -*/ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/init.h> -#include <linux/export.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/cpufreq.h> -#include <linux/debugfs.h> -#include <linux/seq_file.h> -#include <linux/err.h> - -#include <linux/soc/samsung/s3c-cpufreq-core.h> - -static struct dentry *dbgfs_root; -static struct dentry *dbgfs_file_io; -static struct dentry *dbgfs_file_info; -static struct dentry *dbgfs_file_board; - -#define print_ns(x) ((x) / 10), ((x) % 10) - -static void show_max(struct seq_file *seq, struct s3c_freq *f) -{ - seq_printf(seq, "MAX: F=%lu, H=%lu, P=%lu, A=%lu\n", - f->fclk, f->hclk, f->pclk, f->armclk); -} - -static int board_show(struct seq_file *seq, void *p) -{ - struct s3c_cpufreq_config *cfg; - struct s3c_cpufreq_board *brd; - - cfg = s3c_cpufreq_getconfig(); - if (!cfg) { - seq_printf(seq, "no configuration registered\n"); - return 0; - } - - brd = cfg->board; - if (!brd) { - seq_printf(seq, "no board definition set?\n"); - return 0; - } - - seq_printf(seq, "SDRAM refresh %u ns\n", brd->refresh); - seq_printf(seq, "auto_io=%u\n", brd->auto_io); - seq_printf(seq, "need_io=%u\n", brd->need_io); - - show_max(seq, &brd->max); - - - return 0; -} - -DEFINE_SHOW_ATTRIBUTE(board); - -static int info_show(struct seq_file *seq, void *p) -{ - struct s3c_cpufreq_config *cfg; - - cfg = s3c_cpufreq_getconfig(); - if (!cfg) { - seq_printf(seq, "no configuration registered\n"); - return 0; - } - - seq_printf(seq, " FCLK %ld Hz\n", cfg->freq.fclk); - seq_printf(seq, " HCLK %ld Hz (%lu.%lu ns)\n", - cfg->freq.hclk, print_ns(cfg->freq.hclk_tns)); - seq_printf(seq, " PCLK %ld Hz\n", cfg->freq.hclk); - seq_printf(seq, "ARMCLK %ld Hz\n", cfg->freq.armclk); - seq_printf(seq, "\n"); - - show_max(seq, &cfg->max); - - seq_printf(seq, "Divisors: P=%d, H=%d, A=%d, dvs=%s\n", - cfg->divs.h_divisor, cfg->divs.p_divisor, - cfg->divs.arm_divisor, cfg->divs.dvs ? "on" : "off"); - seq_printf(seq, "\n"); - - seq_printf(seq, "lock_pll=%u\n", cfg->lock_pll); - - return 0; -} - -DEFINE_SHOW_ATTRIBUTE(info); - -static int io_show(struct seq_file *seq, void *p) -{ - void (*show_bank)(struct seq_file *, struct s3c_cpufreq_config *, union s3c_iobank *); - struct s3c_cpufreq_config *cfg; - struct s3c_iotimings *iot; - union s3c_iobank *iob; - int bank; - - cfg = s3c_cpufreq_getconfig(); - if (!cfg) { - seq_printf(seq, "no configuration registered\n"); - return 0; - } - - show_bank = cfg->info->debug_io_show; - if (!show_bank) { - seq_printf(seq, "no code to show bank timing\n"); - return 0; - } - - iot = s3c_cpufreq_getiotimings(); - if (!iot) { - seq_printf(seq, "no io timings registered\n"); - return 0; - } - - seq_printf(seq, "hclk period is %lu.%lu ns\n", print_ns(cfg->freq.hclk_tns)); - - for (bank = 0; bank < MAX_BANKS; bank++) { - iob = &iot->bank[bank]; - - seq_printf(seq, "bank %d: ", bank); - - if (!iob->io_2410) { - seq_printf(seq, "nothing set\n"); - continue; - } - - show_bank(seq, cfg, iob); - } - - return 0; -} - -DEFINE_SHOW_ATTRIBUTE(io); - -static int __init s3c_freq_debugfs_init(void) -{ - dbgfs_root = debugfs_create_dir("s3c-cpufreq", NULL); - if (IS_ERR(dbgfs_root)) { - pr_err("%s: error creating debugfs root\n", __func__); - return PTR_ERR(dbgfs_root); - } - - dbgfs_file_io = debugfs_create_file("io-timing", S_IRUGO, dbgfs_root, - NULL, &io_fops); - - dbgfs_file_info = debugfs_create_file("info", S_IRUGO, dbgfs_root, - NULL, &info_fops); - - dbgfs_file_board = debugfs_create_file("board", S_IRUGO, dbgfs_root, - NULL, &board_fops); - - return 0; -} - -late_initcall(s3c_freq_debugfs_init); - diff --git a/drivers/cpufreq/s3c24xx-cpufreq.c b/drivers/cpufreq/s3c24xx-cpufreq.c deleted file mode 100644 index 7380c32b238e..000000000000 --- a/drivers/cpufreq/s3c24xx-cpufreq.c +++ /dev/null @@ -1,648 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2006-2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C24XX CPU Frequency scaling -*/ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/cpufreq.h> -#include <linux/cpu.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/device.h> -#include <linux/sysfs.h> -#include <linux/slab.h> -#include <linux/soc/samsung/s3c-cpufreq-core.h> -#include <linux/soc/samsung/s3c-pm.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -/* note, cpufreq support deals in kHz, no Hz */ -static struct cpufreq_driver s3c24xx_driver; -static struct s3c_cpufreq_config cpu_cur; -static struct s3c_iotimings s3c24xx_iotiming; -static struct cpufreq_frequency_table *pll_reg; -static unsigned int last_target = ~0; -static unsigned int ftab_size; -static struct cpufreq_frequency_table *ftab; - -static struct clk *_clk_mpll; -static struct clk *_clk_xtal; -static struct clk *clk_fclk; -static struct clk *clk_hclk; -static struct clk *clk_pclk; -static struct clk *clk_arm; - -#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS -struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void) -{ - return &cpu_cur; -} - -struct s3c_iotimings *s3c_cpufreq_getiotimings(void) -{ - return &s3c24xx_iotiming; -} -#endif /* CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS */ - -static void s3c_cpufreq_getcur(struct s3c_cpufreq_config *cfg) -{ - unsigned long fclk, pclk, hclk, armclk; - - cfg->freq.fclk = fclk = clk_get_rate(clk_fclk); - cfg->freq.hclk = hclk = clk_get_rate(clk_hclk); - cfg->freq.pclk = pclk = clk_get_rate(clk_pclk); - cfg->freq.armclk = armclk = clk_get_rate(clk_arm); - - cfg->pll.driver_data = s3c24xx_read_mpllcon(); - cfg->pll.frequency = fclk; - - cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10); - - cfg->divs.h_divisor = fclk / hclk; - cfg->divs.p_divisor = fclk / pclk; -} - -static inline void s3c_cpufreq_calc(struct s3c_cpufreq_config *cfg) -{ - unsigned long pll = cfg->pll.frequency; - - cfg->freq.fclk = pll; - cfg->freq.hclk = pll / cfg->divs.h_divisor; - cfg->freq.pclk = pll / cfg->divs.p_divisor; - - /* convert hclk into 10ths of nanoseconds for io calcs */ - cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10); -} - -static inline int closer(unsigned int target, unsigned int n, unsigned int c) -{ - int diff_cur = abs(target - c); - int diff_new = abs(target - n); - - return (diff_new < diff_cur); -} - -static void s3c_cpufreq_show(const char *pfx, - struct s3c_cpufreq_config *cfg) -{ - s3c_freq_dbg("%s: Fvco=%u, F=%lu, A=%lu, H=%lu (%u), P=%lu (%u)\n", - pfx, cfg->pll.frequency, cfg->freq.fclk, cfg->freq.armclk, - cfg->freq.hclk, cfg->divs.h_divisor, - cfg->freq.pclk, cfg->divs.p_divisor); -} - -/* functions to wrapper the driver info calls to do the cpu specific work */ - -static void s3c_cpufreq_setio(struct s3c_cpufreq_config *cfg) -{ - if (cfg->info->set_iotiming) - (cfg->info->set_iotiming)(cfg, &s3c24xx_iotiming); -} - -static int s3c_cpufreq_calcio(struct s3c_cpufreq_config *cfg) -{ - if (cfg->info->calc_iotiming) - return (cfg->info->calc_iotiming)(cfg, &s3c24xx_iotiming); - - return 0; -} - -static void s3c_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg) -{ - (cfg->info->set_refresh)(cfg); -} - -static void s3c_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) -{ - (cfg->info->set_divs)(cfg); -} - -static int s3c_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg) -{ - return (cfg->info->calc_divs)(cfg); -} - -static void s3c_cpufreq_setfvco(struct s3c_cpufreq_config *cfg) -{ - cfg->mpll = _clk_mpll; - (cfg->info->set_fvco)(cfg); -} - -static inline void s3c_cpufreq_updateclk(struct clk *clk, - unsigned int freq) -{ - clk_set_rate(clk, freq); -} - -static int s3c_cpufreq_settarget(struct cpufreq_policy *policy, - unsigned int target_freq, - struct cpufreq_frequency_table *pll) -{ - struct s3c_cpufreq_freqs freqs; - struct s3c_cpufreq_config cpu_new; - unsigned long flags; - - cpu_new = cpu_cur; /* copy new from current */ - - s3c_cpufreq_show("cur", &cpu_cur); - - /* TODO - check for DMA currently outstanding */ - - cpu_new.pll = pll ? *pll : cpu_cur.pll; - - if (pll) - freqs.pll_changing = 1; - - /* update our frequencies */ - - cpu_new.freq.armclk = target_freq; - cpu_new.freq.fclk = cpu_new.pll.frequency; - - if (s3c_cpufreq_calcdivs(&cpu_new) < 0) { - pr_err("no divisors for %d\n", target_freq); - goto err_notpossible; - } - - s3c_freq_dbg("%s: got divs\n", __func__); - - s3c_cpufreq_calc(&cpu_new); - - s3c_freq_dbg("%s: calculated frequencies for new\n", __func__); - - if (cpu_new.freq.hclk != cpu_cur.freq.hclk) { - if (s3c_cpufreq_calcio(&cpu_new) < 0) { - pr_err("%s: no IO timings\n", __func__); - goto err_notpossible; - } - } - - s3c_cpufreq_show("new", &cpu_new); - - /* setup our cpufreq parameters */ - - freqs.old = cpu_cur.freq; - freqs.new = cpu_new.freq; - - freqs.freqs.old = cpu_cur.freq.armclk / 1000; - freqs.freqs.new = cpu_new.freq.armclk / 1000; - - /* update f/h/p clock settings before we issue the change - * notification, so that drivers do not need to do anything - * special if they want to recalculate on CPUFREQ_PRECHANGE. */ - - s3c_cpufreq_updateclk(_clk_mpll, cpu_new.pll.frequency); - s3c_cpufreq_updateclk(clk_fclk, cpu_new.freq.fclk); - s3c_cpufreq_updateclk(clk_hclk, cpu_new.freq.hclk); - s3c_cpufreq_updateclk(clk_pclk, cpu_new.freq.pclk); - - /* start the frequency change */ - cpufreq_freq_transition_begin(policy, &freqs.freqs); - - /* If hclk is staying the same, then we do not need to - * re-write the IO or the refresh timings whilst we are changing - * speed. */ - - local_irq_save(flags); - - /* is our memory clock slowing down? */ - if (cpu_new.freq.hclk < cpu_cur.freq.hclk) { - s3c_cpufreq_setrefresh(&cpu_new); - s3c_cpufreq_setio(&cpu_new); - } - - if (cpu_new.freq.fclk == cpu_cur.freq.fclk) { - /* not changing PLL, just set the divisors */ - - s3c_cpufreq_setdivs(&cpu_new); - } else { - if (cpu_new.freq.fclk < cpu_cur.freq.fclk) { - /* slow the cpu down, then set divisors */ - - s3c_cpufreq_setfvco(&cpu_new); - s3c_cpufreq_setdivs(&cpu_new); - } else { - /* set the divisors, then speed up */ - - s3c_cpufreq_setdivs(&cpu_new); - s3c_cpufreq_setfvco(&cpu_new); - } - } - - /* did our memory clock speed up */ - if (cpu_new.freq.hclk > cpu_cur.freq.hclk) { - s3c_cpufreq_setrefresh(&cpu_new); - s3c_cpufreq_setio(&cpu_new); - } - - /* update our current settings */ - cpu_cur = cpu_new; - - local_irq_restore(flags); - - /* notify everyone we've done this */ - cpufreq_freq_transition_end(policy, &freqs.freqs, 0); - - s3c_freq_dbg("%s: finished\n", __func__); - return 0; - - err_notpossible: - pr_err("no compatible settings for %d\n", target_freq); - return -EINVAL; -} - -/* s3c_cpufreq_target - * - * called by the cpufreq core to adjust the frequency that the CPU - * is currently running at. - */ - -static int s3c_cpufreq_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - struct cpufreq_frequency_table *pll; - unsigned int index; - - /* avoid repeated calls which cause a needless amout of duplicated - * logging output (and CPU time as the calculation process is - * done) */ - if (target_freq == last_target) - return 0; - - last_target = target_freq; - - s3c_freq_dbg("%s: policy %p, target %u, relation %u\n", - __func__, policy, target_freq, relation); - - if (ftab) { - index = cpufreq_frequency_table_target(policy, target_freq, - relation); - - s3c_freq_dbg("%s: adjust %d to entry %d (%u)\n", __func__, - target_freq, index, ftab[index].frequency); - target_freq = ftab[index].frequency; - } - - target_freq *= 1000; /* convert target to Hz */ - - /* find the settings for our new frequency */ - - if (!pll_reg || cpu_cur.lock_pll) { - /* either we've not got any PLL values, or we've locked - * to the current one. */ - pll = NULL; - } else { - struct cpufreq_policy tmp_policy; - - /* we keep the cpu pll table in Hz, to ensure we get an - * accurate value for the PLL output. */ - - tmp_policy.min = policy->min * 1000; - tmp_policy.max = policy->max * 1000; - tmp_policy.cpu = policy->cpu; - tmp_policy.freq_table = pll_reg; - - /* cpufreq_frequency_table_target returns the index - * of the table entry, not the value of - * the table entry's index field. */ - - index = cpufreq_frequency_table_target(&tmp_policy, target_freq, - relation); - pll = pll_reg + index; - - s3c_freq_dbg("%s: target %u => %u\n", - __func__, target_freq, pll->frequency); - - target_freq = pll->frequency; - } - - return s3c_cpufreq_settarget(policy, target_freq, pll); -} - -struct clk *s3c_cpufreq_clk_get(struct device *dev, const char *name) -{ - struct clk *clk; - - clk = clk_get(dev, name); - if (IS_ERR(clk)) - pr_err("failed to get clock '%s'\n", name); - - return clk; -} - -static int s3c_cpufreq_init(struct cpufreq_policy *policy) -{ - policy->clk = clk_arm; - policy->cpuinfo.transition_latency = cpu_cur.info->latency; - policy->freq_table = ftab; - - return 0; -} - -static int __init s3c_cpufreq_initclks(void) -{ - _clk_mpll = s3c_cpufreq_clk_get(NULL, "mpll"); - _clk_xtal = s3c_cpufreq_clk_get(NULL, "xtal"); - clk_fclk = s3c_cpufreq_clk_get(NULL, "fclk"); - clk_hclk = s3c_cpufreq_clk_get(NULL, "hclk"); - clk_pclk = s3c_cpufreq_clk_get(NULL, "pclk"); - clk_arm = s3c_cpufreq_clk_get(NULL, "armclk"); - - if (IS_ERR(clk_fclk) || IS_ERR(clk_hclk) || IS_ERR(clk_pclk) || - IS_ERR(_clk_mpll) || IS_ERR(clk_arm) || IS_ERR(_clk_xtal)) { - pr_err("%s: could not get clock(s)\n", __func__); - return -ENOENT; - } - - pr_info("%s: clocks f=%lu,h=%lu,p=%lu,a=%lu\n", - __func__, - clk_get_rate(clk_fclk) / 1000, - clk_get_rate(clk_hclk) / 1000, - clk_get_rate(clk_pclk) / 1000, - clk_get_rate(clk_arm) / 1000); - - return 0; -} - -#ifdef CONFIG_PM -static struct cpufreq_frequency_table suspend_pll; -static unsigned int suspend_freq; - -static int s3c_cpufreq_suspend(struct cpufreq_policy *policy) -{ - suspend_pll.frequency = clk_get_rate(_clk_mpll); - suspend_pll.driver_data = s3c24xx_read_mpllcon(); - suspend_freq = clk_get_rate(clk_arm); - - return 0; -} - -static int s3c_cpufreq_resume(struct cpufreq_policy *policy) -{ - int ret; - - s3c_freq_dbg("%s: resuming with policy %p\n", __func__, policy); - - last_target = ~0; /* invalidate last_target setting */ - - /* whilst we will be called later on, we try and re-set the - * cpu frequencies as soon as possible so that we do not end - * up resuming devices and then immediately having to re-set - * a number of settings once these devices have restarted. - * - * as a note, it is expected devices are not used until they - * have been un-suspended and at that time they should have - * used the updated clock settings. - */ - - ret = s3c_cpufreq_settarget(NULL, suspend_freq, &suspend_pll); - if (ret) { - pr_err("%s: failed to reset pll/freq\n", __func__); - return ret; - } - - return 0; -} -#else -#define s3c_cpufreq_resume NULL -#define s3c_cpufreq_suspend NULL -#endif - -static struct cpufreq_driver s3c24xx_driver = { - .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK, - .target = s3c_cpufreq_target, - .get = cpufreq_generic_get, - .init = s3c_cpufreq_init, - .suspend = s3c_cpufreq_suspend, - .resume = s3c_cpufreq_resume, - .name = "s3c24xx", -}; - - -int s3c_cpufreq_register(struct s3c_cpufreq_info *info) -{ - if (!info || !info->name) { - pr_err("%s: failed to pass valid information\n", __func__); - return -EINVAL; - } - - pr_info("S3C24XX CPU Frequency driver, %s cpu support\n", - info->name); - - /* check our driver info has valid data */ - - BUG_ON(info->set_refresh == NULL); - BUG_ON(info->set_divs == NULL); - BUG_ON(info->calc_divs == NULL); - - /* info->set_fvco is optional, depending on whether there - * is a need to set the clock code. */ - - cpu_cur.info = info; - - /* Note, driver registering should probably update locktime */ - - return 0; -} - -int __init s3c_cpufreq_setboard(struct s3c_cpufreq_board *board) -{ - struct s3c_cpufreq_board *ours; - - if (!board) { - pr_info("%s: no board data\n", __func__); - return -EINVAL; - } - - /* Copy the board information so that each board can make this - * initdata. */ - - ours = kzalloc(sizeof(*ours), GFP_KERNEL); - if (!ours) - return -ENOMEM; - - *ours = *board; - cpu_cur.board = ours; - - return 0; -} - -static int __init s3c_cpufreq_auto_io(void) -{ - int ret; - - if (!cpu_cur.info->get_iotiming) { - pr_err("%s: get_iotiming undefined\n", __func__); - return -ENOENT; - } - - pr_info("%s: working out IO settings\n", __func__); - - ret = (cpu_cur.info->get_iotiming)(&cpu_cur, &s3c24xx_iotiming); - if (ret) - pr_err("%s: failed to get timings\n", __func__); - - return ret; -} - -/* if one or is zero, then return the other, otherwise return the min */ -#define do_min(_a, _b) ((_a) == 0 ? (_b) : (_b) == 0 ? (_a) : min(_a, _b)) - -/** - * s3c_cpufreq_freq_min - find the minimum settings for the given freq. - * @dst: The destination structure - * @a: One argument. - * @b: The other argument. - * - * Create a minimum of each frequency entry in the 'struct s3c_freq', - * unless the entry is zero when it is ignored and the non-zero argument - * used. - */ -static void s3c_cpufreq_freq_min(struct s3c_freq *dst, - struct s3c_freq *a, struct s3c_freq *b) -{ - dst->fclk = do_min(a->fclk, b->fclk); - dst->hclk = do_min(a->hclk, b->hclk); - dst->pclk = do_min(a->pclk, b->pclk); - dst->armclk = do_min(a->armclk, b->armclk); -} - -static inline u32 calc_locktime(u32 freq, u32 time_us) -{ - u32 result; - - result = freq * time_us; - result = DIV_ROUND_UP(result, 1000 * 1000); - - return result; -} - -static void s3c_cpufreq_update_loctkime(void) -{ - unsigned int bits = cpu_cur.info->locktime_bits; - u32 rate = (u32)clk_get_rate(_clk_xtal); - u32 val; - - if (bits == 0) { - WARN_ON(1); - return; - } - - val = calc_locktime(rate, cpu_cur.info->locktime_u) << bits; - val |= calc_locktime(rate, cpu_cur.info->locktime_m); - - pr_info("%s: new locktime is 0x%08x\n", __func__, val); - s3c24xx_write_locktime(val); -} - -static int s3c_cpufreq_build_freq(void) -{ - int size, ret; - - kfree(ftab); - - size = cpu_cur.info->calc_freqtable(&cpu_cur, NULL, 0); - size++; - - ftab = kcalloc(size, sizeof(*ftab), GFP_KERNEL); - if (!ftab) - return -ENOMEM; - - ftab_size = size; - - ret = cpu_cur.info->calc_freqtable(&cpu_cur, ftab, size); - s3c_cpufreq_addfreq(ftab, ret, size, CPUFREQ_TABLE_END); - - return 0; -} - -static int __init s3c_cpufreq_initcall(void) -{ - int ret = 0; - - if (cpu_cur.info && cpu_cur.board) { - ret = s3c_cpufreq_initclks(); - if (ret) - goto out; - - /* get current settings */ - s3c_cpufreq_getcur(&cpu_cur); - s3c_cpufreq_show("cur", &cpu_cur); - - if (cpu_cur.board->auto_io) { - ret = s3c_cpufreq_auto_io(); - if (ret) { - pr_err("%s: failed to get io timing\n", - __func__); - goto out; - } - } - - if (cpu_cur.board->need_io && !cpu_cur.info->set_iotiming) { - pr_err("%s: no IO support registered\n", __func__); - ret = -EINVAL; - goto out; - } - - if (!cpu_cur.info->need_pll) - cpu_cur.lock_pll = 1; - - s3c_cpufreq_update_loctkime(); - - s3c_cpufreq_freq_min(&cpu_cur.max, &cpu_cur.board->max, - &cpu_cur.info->max); - - if (cpu_cur.info->calc_freqtable) - s3c_cpufreq_build_freq(); - - ret = cpufreq_register_driver(&s3c24xx_driver); - } - - out: - return ret; -} - -late_initcall(s3c_cpufreq_initcall); - -/** - * s3c_plltab_register - register CPU PLL table. - * @plls: The list of PLL entries. - * @plls_no: The size of the PLL entries @plls. - * - * Register the given set of PLLs with the system. - */ -int s3c_plltab_register(struct cpufreq_frequency_table *plls, - unsigned int plls_no) -{ - struct cpufreq_frequency_table *vals; - unsigned int size; - - size = sizeof(*vals) * (plls_no + 1); - - vals = kzalloc(size, GFP_KERNEL); - if (vals) { - memcpy(vals, plls, size); - pll_reg = vals; - - /* write a terminating entry, we don't store it in the - * table that is stored in the kernel */ - vals += plls_no; - vals->frequency = CPUFREQ_TABLE_END; - - pr_info("%d PLL entries\n", plls_no); - } else - pr_err("no memory for PLL tables\n"); - - return vals ? 0 : -ENOMEM; -} diff --git a/drivers/cpufreq/sa1100-cpufreq.c b/drivers/cpufreq/sa1100-cpufreq.c deleted file mode 100644 index 252b9fc26124..000000000000 --- a/drivers/cpufreq/sa1100-cpufreq.c +++ /dev/null @@ -1,206 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * cpu-sa1100.c: clock scaling for the SA1100 - * - * Copyright (C) 2000 2001, The Delft University of Technology - * - * Authors: - * - Johan Pouwelse (J.A.Pouwelse@its.tudelft.nl): initial version - * - Erik Mouw (J.A.K.Mouw@its.tudelft.nl): - * - major rewrite for linux-2.3.99 - * - rewritten for the more generic power management scheme in - * linux-2.4.5-rmk1 - * - * This software has been developed while working on the LART - * computing board (http://www.lartmaker.nl/), which is - * sponsored by the Mobile Multi-media Communications - * (http://www.mobimedia.org/) and Ubiquitous Communications - * (http://www.ubicom.tudelft.nl/) projects. - * - * The authors can be reached at: - * - * Erik Mouw - * Information and Communication Theory Group - * Faculty of Information Technology and Systems - * Delft University of Technology - * P.O. Box 5031 - * 2600 GA Delft - * The Netherlands - * - * Theory of operations - * ==================== - * - * Clock scaling can be used to lower the power consumption of the CPU - * core. This will give you a somewhat longer running time. - * - * The SA-1100 has a single register to change the core clock speed: - * - * PPCR 0x90020014 PLL config - * - * However, the DRAM timings are closely related to the core clock - * speed, so we need to change these, too. The used registers are: - * - * MDCNFG 0xA0000000 DRAM config - * MDCAS0 0xA0000004 Access waveform - * MDCAS1 0xA0000008 Access waveform - * MDCAS2 0xA000000C Access waveform - * - * Care must be taken to change the DRAM parameters the correct way, - * because otherwise the DRAM becomes unusable and the kernel will - * crash. - * - * The simple solution to avoid a kernel crash is to put the actual - * clock change in ROM and jump to that code from the kernel. The main - * disadvantage is that the ROM has to be modified, which is not - * possible on all SA-1100 platforms. Another disadvantage is that - * jumping to ROM makes clock switching unnecessary complicated. - * - * The idea behind this driver is that the memory configuration can be - * changed while running from DRAM (even with interrupts turned on!) - * as long as all re-configuration steps yield a valid DRAM - * configuration. The advantages are clear: it will run on all SA-1100 - * platforms, and the code is very simple. - * - * If you really want to understand what is going on in - * sa1100_update_dram_timings(), you'll have to read sections 8.2, - * 9.5.7.3, and 10.2 from the "Intel StrongARM SA-1100 Microprocessor - * Developers Manual" (available for free from Intel). - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/io.h> - -#include <asm/cputype.h> - -#include <mach/generic.h> -#include <mach/hardware.h> - -struct sa1100_dram_regs { - int speed; - u32 mdcnfg; - u32 mdcas0; - u32 mdcas1; - u32 mdcas2; -}; - - -static struct cpufreq_driver sa1100_driver; - -static struct sa1100_dram_regs sa1100_dram_settings[] = { - /*speed, mdcnfg, mdcas0, mdcas1, mdcas2, clock freq */ - { 59000, 0x00dc88a3, 0xcccccccf, 0xfffffffc, 0xffffffff},/* 59.0 MHz */ - { 73700, 0x011490a3, 0xcccccccf, 0xfffffffc, 0xffffffff},/* 73.7 MHz */ - { 88500, 0x014e90a3, 0xcccccccf, 0xfffffffc, 0xffffffff},/* 88.5 MHz */ - {103200, 0x01889923, 0xcccccccf, 0xfffffffc, 0xffffffff},/* 103.2 MHz */ - {118000, 0x01c29923, 0x9999998f, 0xfffffff9, 0xffffffff},/* 118.0 MHz */ - {132700, 0x01fb2123, 0x9999998f, 0xfffffff9, 0xffffffff},/* 132.7 MHz */ - {147500, 0x02352123, 0x3333330f, 0xfffffff3, 0xffffffff},/* 147.5 MHz */ - {162200, 0x026b29a3, 0x38e38e1f, 0xfff8e38e, 0xffffffff},/* 162.2 MHz */ - {176900, 0x02a329a3, 0x71c71c1f, 0xfff1c71c, 0xffffffff},/* 176.9 MHz */ - {191700, 0x02dd31a3, 0xe38e383f, 0xffe38e38, 0xffffffff},/* 191.7 MHz */ - {206400, 0x03153223, 0xc71c703f, 0xffc71c71, 0xffffffff},/* 206.4 MHz */ - {221200, 0x034fba23, 0xc71c703f, 0xffc71c71, 0xffffffff},/* 221.2 MHz */ - {235900, 0x03853a23, 0xe1e1e07f, 0xe1e1e1e1, 0xffffffe1},/* 235.9 MHz */ - {250700, 0x03bf3aa3, 0xc3c3c07f, 0xc3c3c3c3, 0xffffffc3},/* 250.7 MHz */ - {265400, 0x03f7c2a3, 0xc3c3c07f, 0xc3c3c3c3, 0xffffffc3},/* 265.4 MHz */ - {280200, 0x0431c2a3, 0x878780ff, 0x87878787, 0xffffff87},/* 280.2 MHz */ - { 0, 0, 0, 0, 0 } /* last entry */ -}; - -static void sa1100_update_dram_timings(int current_speed, int new_speed) -{ - struct sa1100_dram_regs *settings = sa1100_dram_settings; - - /* find speed */ - while (settings->speed != 0) { - if (new_speed == settings->speed) - break; - - settings++; - } - - if (settings->speed == 0) { - panic("%s: couldn't find dram setting for speed %d\n", - __func__, new_speed); - } - - /* No risk, no fun: run with interrupts on! */ - if (new_speed > current_speed) { - /* We're going FASTER, so first relax the memory - * timings before changing the core frequency - */ - - /* Half the memory access clock */ - MDCNFG |= MDCNFG_CDB2; - - /* The order of these statements IS important, keep 8 - * pulses!! - */ - MDCAS2 = settings->mdcas2; - MDCAS1 = settings->mdcas1; - MDCAS0 = settings->mdcas0; - MDCNFG = settings->mdcnfg; - } else { - /* We're going SLOWER: first decrease the core - * frequency and then tighten the memory settings. - */ - - /* Half the memory access clock */ - MDCNFG |= MDCNFG_CDB2; - - /* The order of these statements IS important, keep 8 - * pulses!! - */ - MDCAS0 = settings->mdcas0; - MDCAS1 = settings->mdcas1; - MDCAS2 = settings->mdcas2; - MDCNFG = settings->mdcnfg; - } -} - -static int sa1100_target(struct cpufreq_policy *policy, unsigned int ppcr) -{ - unsigned int cur = sa11x0_getspeed(0); - unsigned int new_freq; - - new_freq = sa11x0_freq_table[ppcr].frequency; - - if (new_freq > cur) - sa1100_update_dram_timings(cur, new_freq); - - PPCR = ppcr; - - if (new_freq < cur) - sa1100_update_dram_timings(cur, new_freq); - - return 0; -} - -static int __init sa1100_cpu_init(struct cpufreq_policy *policy) -{ - cpufreq_generic_init(policy, sa11x0_freq_table, 0); - return 0; -} - -static struct cpufreq_driver sa1100_driver __refdata = { - .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK | - CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING, - .verify = cpufreq_generic_frequency_table_verify, - .target_index = sa1100_target, - .get = sa11x0_getspeed, - .init = sa1100_cpu_init, - .name = "sa1100", -}; - -static int __init sa1100_dram_init(void) -{ - if (cpu_is_sa1100()) - return cpufreq_register_driver(&sa1100_driver); - else - return -ENODEV; -} - -arch_initcall(sa1100_dram_init); diff --git a/drivers/cpufreq/sa1110-cpufreq.c b/drivers/cpufreq/sa1110-cpufreq.c index 1a83c8678a63..bb7f591a8b05 100644 --- a/drivers/cpufreq/sa1110-cpufreq.c +++ b/drivers/cpufreq/sa1110-cpufreq.c @@ -344,14 +344,8 @@ static int __init sa1110_clk_init(void) if (!name[0]) { if (machine_is_assabet()) name = "TC59SM716-CL3"; - if (machine_is_pt_system3()) - name = "K4S641632D"; - if (machine_is_h3100()) - name = "KM416S4030CT"; if (machine_is_jornada720() || machine_is_h3600()) name = "K4S281632B-1H"; - if (machine_is_nanoengine()) - name = "MT48LC8M16A2TG-75"; } sdram = sa1110_find_sdram(name); |