diff options
Diffstat (limited to 'drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu11_driver_if_sienna_cichlid.h')
-rw-r--r-- | drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu11_driver_if_sienna_cichlid.h | 1691 |
1 files changed, 1691 insertions, 0 deletions
diff --git a/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu11_driver_if_sienna_cichlid.h b/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu11_driver_if_sienna_cichlid.h new file mode 100644 index 000000000000..63b8701fd466 --- /dev/null +++ b/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu11_driver_if_sienna_cichlid.h @@ -0,0 +1,1691 @@ +/* + * Copyright 2020 Advanced Micro Devices, Inc. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + */ + +#ifndef __SMU11_DRIVER_IF_SIENNA_CICHLID_H__ +#define __SMU11_DRIVER_IF_SIENNA_CICHLID_H__ + +// *** IMPORTANT *** +// SMU TEAM: Always increment the interface version if +// any structure is changed in this file +#define SMU11_DRIVER_IF_VERSION 0x3B + +#define PPTABLE_Sienna_Cichlid_SMU_VERSION 7 + +#define NUM_GFXCLK_DPM_LEVELS 16 +#define NUM_SMNCLK_DPM_LEVELS 2 +#define NUM_SOCCLK_DPM_LEVELS 8 +#define NUM_MP0CLK_DPM_LEVELS 2 +#define NUM_DCLK_DPM_LEVELS 8 +#define NUM_VCLK_DPM_LEVELS 8 +#define NUM_DCEFCLK_DPM_LEVELS 8 +#define NUM_PHYCLK_DPM_LEVELS 8 +#define NUM_DISPCLK_DPM_LEVELS 8 +#define NUM_PIXCLK_DPM_LEVELS 8 +#define NUM_DTBCLK_DPM_LEVELS 8 +#define NUM_UCLK_DPM_LEVELS 4 +#define NUM_MP1CLK_DPM_LEVELS 2 +#define NUM_LINK_LEVELS 2 +#define NUM_FCLK_DPM_LEVELS 8 +#define NUM_XGMI_LEVELS 2 +#define NUM_XGMI_PSTATE_LEVELS 4 +#define NUM_OD_FAN_MAX_POINTS 6 + +#define MAX_GFXCLK_DPM_LEVEL (NUM_GFXCLK_DPM_LEVELS - 1) +#define MAX_SMNCLK_DPM_LEVEL (NUM_SMNCLK_DPM_LEVELS - 1) +#define MAX_SOCCLK_DPM_LEVEL (NUM_SOCCLK_DPM_LEVELS - 1) +#define MAX_MP0CLK_DPM_LEVEL (NUM_MP0CLK_DPM_LEVELS - 1) +#define MAX_DCLK_DPM_LEVEL (NUM_DCLK_DPM_LEVELS - 1) +#define MAX_VCLK_DPM_LEVEL (NUM_VCLK_DPM_LEVELS - 1) +#define MAX_DCEFCLK_DPM_LEVEL (NUM_DCEFCLK_DPM_LEVELS - 1) +#define MAX_DISPCLK_DPM_LEVEL (NUM_DISPCLK_DPM_LEVELS - 1) +#define MAX_PIXCLK_DPM_LEVEL (NUM_PIXCLK_DPM_LEVELS - 1) +#define MAX_PHYCLK_DPM_LEVEL (NUM_PHYCLK_DPM_LEVELS - 1) +#define MAX_DTBCLK_DPM_LEVEL (NUM_DTBCLK_DPM_LEVELS - 1) +#define MAX_UCLK_DPM_LEVEL (NUM_UCLK_DPM_LEVELS - 1) +#define MAX_MP1CLK_DPM_LEVEL (NUM_MP1CLK_DPM_LEVELS - 1) +#define MAX_LINK_LEVEL (NUM_LINK_LEVELS - 1) +#define MAX_FCLK_DPM_LEVEL (NUM_FCLK_DPM_LEVELS - 1) + +//Gemini Modes +#define PPSMC_GeminiModeNone 0 //Single GPU board +#define PPSMC_GeminiModeMaster 1 //Master GPU on a Gemini board +#define PPSMC_GeminiModeSlave 2 //Slave GPU on a Gemini board + +// Feature Control Defines +// DPM +#define FEATURE_DPM_PREFETCHER_BIT 0 +#define FEATURE_DPM_GFXCLK_BIT 1 +#define FEATURE_DPM_GFX_GPO_BIT 2 +#define FEATURE_DPM_UCLK_BIT 3 +#define FEATURE_DPM_FCLK_BIT 4 +#define FEATURE_DPM_SOCCLK_BIT 5 +#define FEATURE_DPM_MP0CLK_BIT 6 +#define FEATURE_DPM_LINK_BIT 7 +#define FEATURE_DPM_DCEFCLK_BIT 8 +#define FEATURE_DPM_XGMI_BIT 9 +#define FEATURE_MEM_VDDCI_SCALING_BIT 10 +#define FEATURE_MEM_MVDD_SCALING_BIT 11 + +//Idle +#define FEATURE_DS_GFXCLK_BIT 12 +#define FEATURE_DS_SOCCLK_BIT 13 +#define FEATURE_DS_FCLK_BIT 14 +#define FEATURE_DS_LCLK_BIT 15 +#define FEATURE_DS_DCEFCLK_BIT 16 +#define FEATURE_DS_UCLK_BIT 17 +#define FEATURE_GFX_ULV_BIT 18 +#define FEATURE_FW_DSTATE_BIT 19 +#define FEATURE_GFXOFF_BIT 20 +#define FEATURE_BACO_BIT 21 +#define FEATURE_MM_DPM_PG_BIT 22 +#define FEATURE_SPARE_23_BIT 23 +//Throttler/Response +#define FEATURE_PPT_BIT 24 +#define FEATURE_TDC_BIT 25 +#define FEATURE_APCC_PLUS_BIT 26 +#define FEATURE_GTHR_BIT 27 +#define FEATURE_ACDC_BIT 28 +#define FEATURE_VR0HOT_BIT 29 +#define FEATURE_VR1HOT_BIT 30 +#define FEATURE_FW_CTF_BIT 31 +#define FEATURE_FAN_CONTROL_BIT 32 +#define FEATURE_THERMAL_BIT 33 +#define FEATURE_GFX_DCS_BIT 34 +//VF +#define FEATURE_RM_BIT 35 +#define FEATURE_LED_DISPLAY_BIT 36 +//Other +#define FEATURE_GFX_SS_BIT 37 +#define FEATURE_OUT_OF_BAND_MONITOR_BIT 38 +#define FEATURE_TEMP_DEPENDENT_VMIN_BIT 39 + +#define FEATURE_MMHUB_PG_BIT 40 +#define FEATURE_ATHUB_PG_BIT 41 +#define FEATURE_APCC_DFLL_BIT 42 +#define FEATURE_DF_SUPERV_BIT 43 +#define FEATURE_RSMU_SMN_CG_BIT 44 +#define FEATURE_DF_CSTATE_BIT 45 +#define FEATURE_2_STEP_PSTATE_BIT 46 +#define FEATURE_SMNCLK_DPM_BIT 47 +#define FEATURE_PERLINK_GMIDOWN_BIT 48 +#define FEATURE_GFX_EDC_BIT 49 +#define FEATURE_GFX_PER_PART_VMIN_BIT 50 +#define FEATURE_SMART_SHIFT_BIT 51 +#define FEATURE_APT_BIT 52 +#define FEATURE_SPARE_53_BIT 53 +#define FEATURE_SPARE_54_BIT 54 +#define FEATURE_SPARE_55_BIT 55 +#define FEATURE_SPARE_56_BIT 56 +#define FEATURE_SPARE_57_BIT 57 +#define FEATURE_SPARE_58_BIT 58 +#define FEATURE_SPARE_59_BIT 59 +#define FEATURE_SPARE_60_BIT 60 +#define FEATURE_SPARE_61_BIT 61 +#define FEATURE_SPARE_62_BIT 62 +#define FEATURE_SPARE_63_BIT 63 +#define NUM_FEATURES 64 + +//For use with feature control messages +typedef enum { + FEATURE_PWR_ALL, + FEATURE_PWR_S5, + FEATURE_PWR_BACO, + FEATURE_PWR_SOC, + FEATURE_PWR_GFX, + FEATURE_PWR_DOMAIN_COUNT, +} FEATURE_PWR_DOMAIN_e; + + +// Debug Overrides Bitmask +#define DPM_OVERRIDE_DISABLE_FCLK_PID 0x00000001 +#define DPM_OVERRIDE_DISABLE_UCLK_PID 0x00000002 +#define DPM_OVERRIDE_DISABLE_VOLT_LINK_VCN_FCLK 0x00000004 +#define DPM_OVERRIDE_ENABLE_FREQ_LINK_VCLK_FCLK 0x00000008 +#define DPM_OVERRIDE_ENABLE_FREQ_LINK_DCLK_FCLK 0x00000010 +#define DPM_OVERRIDE_ENABLE_FREQ_LINK_GFXCLK_SOCCLK 0x00000020 +#define DPM_OVERRIDE_ENABLE_FREQ_LINK_GFXCLK_UCLK 0x00000040 +#define DPM_OVERRIDE_DISABLE_VOLT_LINK_DCE_FCLK 0x00000080 +#define DPM_OVERRIDE_DISABLE_VOLT_LINK_MP0_SOCCLK 0x00000100 +#define DPM_OVERRIDE_DISABLE_DFLL_PLL_SHUTDOWN 0x00000200 +#define DPM_OVERRIDE_DISABLE_MEMORY_TEMPERATURE_READ 0x00000400 +#define DPM_OVERRIDE_DISABLE_VOLT_LINK_VCN_DCEFCLK 0x00000800 +#define DPM_OVERRIDE_DISABLE_FAST_FCLK_TIMER 0x00001000 +#define DPM_OVERRIDE_DISABLE_VCN_PG 0x00002000 +#define DPM_OVERRIDE_DISABLE_FMAX_VMAX 0x00004000 + +// VR Mapping Bit Defines +#define VR_MAPPING_VR_SELECT_MASK 0x01 +#define VR_MAPPING_VR_SELECT_SHIFT 0x00 + +#define VR_MAPPING_PLANE_SELECT_MASK 0x02 +#define VR_MAPPING_PLANE_SELECT_SHIFT 0x01 + +// PSI Bit Defines +#define PSI_SEL_VR0_PLANE0_PSI0 0x01 +#define PSI_SEL_VR0_PLANE0_PSI1 0x02 +#define PSI_SEL_VR0_PLANE1_PSI0 0x04 +#define PSI_SEL_VR0_PLANE1_PSI1 0x08 +#define PSI_SEL_VR1_PLANE0_PSI0 0x10 +#define PSI_SEL_VR1_PLANE0_PSI1 0x20 +#define PSI_SEL_VR1_PLANE1_PSI0 0x40 +#define PSI_SEL_VR1_PLANE1_PSI1 0x80 + +// Throttler Control/Status Bits +#define THROTTLER_PADDING_BIT 0 +#define THROTTLER_TEMP_EDGE_BIT 1 +#define THROTTLER_TEMP_HOTSPOT_BIT 2 +#define THROTTLER_TEMP_MEM_BIT 3 +#define THROTTLER_TEMP_VR_GFX_BIT 4 +#define THROTTLER_TEMP_VR_MEM0_BIT 5 +#define THROTTLER_TEMP_VR_MEM1_BIT 6 +#define THROTTLER_TEMP_VR_SOC_BIT 7 +#define THROTTLER_TEMP_LIQUID0_BIT 8 +#define THROTTLER_TEMP_LIQUID1_BIT 9 +#define THROTTLER_TEMP_PLX_BIT 10 +#define THROTTLER_TDC_GFX_BIT 11 +#define THROTTLER_TDC_SOC_BIT 12 +#define THROTTLER_PPT0_BIT 13 +#define THROTTLER_PPT1_BIT 14 +#define THROTTLER_PPT2_BIT 15 +#define THROTTLER_PPT3_BIT 16 +#define THROTTLER_FIT_BIT 17 +#define THROTTLER_PPM_BIT 18 +#define THROTTLER_APCC_BIT 19 +#define THROTTLER_COUNT 20 + +// FW DState Features Control Bits +// FW DState Features Control Bits +#define FW_DSTATE_SOC_ULV_BIT 0 +#define FW_DSTATE_G6_HSR_BIT 1 +#define FW_DSTATE_G6_PHY_VDDCI_OFF_BIT 2 +#define FW_DSTATE_MP0_DS_BIT 3 +#define FW_DSTATE_SMN_DS_BIT 4 +#define FW_DSTATE_MP1_DS_BIT 5 +#define FW_DSTATE_MP1_WHISPER_MODE_BIT 6 +#define FW_DSTATE_SOC_LIV_MIN_BIT 7 +#define FW_DSTATE_SOC_PLL_PWRDN_BIT 8 +#define FW_DSTATE_MEM_PLL_PWRDN_BIT 9 +#define FW_DSTATE_OPTIMIZE_MALL_REFRESH_BIT 10 +#define FW_DSTATE_MEM_PSI_BIT 11 +#define FW_DSTATE_HSR_NON_STROBE_BIT 12 +#define FW_DSTATE_MP0_ENTER_WFI_BIT 13 + +#define FW_DSTATE_SOC_ULV_MASK (1 << FW_DSTATE_SOC_ULV_BIT ) +#define FW_DSTATE_G6_HSR_MASK (1 << FW_DSTATE_G6_HSR_BIT ) +#define FW_DSTATE_G6_PHY_VDDCI_OFF_MASK (1 << FW_DSTATE_G6_PHY_VDDCI_OFF_BIT ) +#define FW_DSTATE_MP1_DS_MASK (1 << FW_DSTATE_MP1_DS_BIT ) +#define FW_DSTATE_MP0_DS_MASK (1 << FW_DSTATE_MP0_DS_BIT ) +#define FW_DSTATE_SMN_DS_MASK (1 << FW_DSTATE_SMN_DS_BIT ) +#define FW_DSTATE_MP1_WHISPER_MODE_MASK (1 << FW_DSTATE_MP1_WHISPER_MODE_BIT ) +#define FW_DSTATE_SOC_LIV_MIN_MASK (1 << FW_DSTATE_SOC_LIV_MIN_BIT ) +#define FW_DSTATE_SOC_PLL_PWRDN_MASK (1 << FW_DSTATE_SOC_PLL_PWRDN_BIT ) +#define FW_DSTATE_MEM_PLL_PWRDN_MASK (1 << FW_DSTATE_MEM_PLL_PWRDN_BIT ) +#define FW_DSTATE_OPTIMIZE_MALL_REFRESH_MASK (1 << FW_DSTATE_OPTIMIZE_MALL_REFRESH_BIT ) +#define FW_DSTATE_MEM_PSI_MASK (1 << FW_DSTATE_MEM_PSI_BIT ) +#define FW_DSTATE_HSR_NON_STROBE_MASK (1 << FW_DSTATE_HSR_NON_STROBE_BIT ) +#define FW_DSTATE_MP0_ENTER_WFI_MASK (1 << FW_DSTATE_MP0_ENTER_WFI_BIT ) + +// GFX GPO Feature Contains PACE and DEM sub features +#define GFX_GPO_PACE_BIT 0 +#define GFX_GPO_DEM_BIT 1 + +#define GFX_GPO_PACE_MASK (1 << GFX_GPO_PACE_BIT) +#define GFX_GPO_DEM_MASK (1 << GFX_GPO_DEM_BIT ) + +#define GPO_UPDATE_REQ_UCLKDPM_MASK 0x1 +#define GPO_UPDATE_REQ_FCLKDPM_MASK 0x2 +#define GPO_UPDATE_REQ_MALLHIT_MASK 0x4 + + +//LED Display Mask & Control Bits +#define LED_DISPLAY_GFX_DPM_BIT 0 +#define LED_DISPLAY_PCIE_BIT 1 +#define LED_DISPLAY_ERROR_BIT 2 + +//RLC Pace Table total number of levels +#define RLC_PACE_TABLE_NUM_LEVELS 16 + +typedef enum { + DRAM_BIT_WIDTH_DISABLED = 0, + DRAM_BIT_WIDTH_X_8, + DRAM_BIT_WIDTH_X_16, + DRAM_BIT_WIDTH_X_32, + DRAM_BIT_WIDTH_X_64, // NOT USED. + DRAM_BIT_WIDTH_X_128, + DRAM_BIT_WIDTH_COUNT, +} DRAM_BIT_WIDTH_TYPE_e; + +//I2C Interface +#define NUM_I2C_CONTROLLERS 16 + +#define I2C_CONTROLLER_ENABLED 1 +#define I2C_CONTROLLER_DISABLED 0 + +#define MAX_SW_I2C_COMMANDS 24 + +typedef enum { + I2C_CONTROLLER_PORT_0 = 0, //CKSVII2C0 + I2C_CONTROLLER_PORT_1 = 1, //CKSVII2C1 + I2C_CONTROLLER_PORT_COUNT, +} I2cControllerPort_e; + +typedef enum { + I2C_CONTROLLER_NAME_VR_GFX = 0, + I2C_CONTROLLER_NAME_VR_SOC, + I2C_CONTROLLER_NAME_VR_VDDCI, + I2C_CONTROLLER_NAME_VR_MVDD, + I2C_CONTROLLER_NAME_LIQUID0, + I2C_CONTROLLER_NAME_LIQUID1, + I2C_CONTROLLER_NAME_PLX, + I2C_CONTROLLER_NAME_OTHER, + I2C_CONTROLLER_NAME_COUNT, +} I2cControllerName_e; + +typedef enum { + I2C_CONTROLLER_THROTTLER_TYPE_NONE = 0, + I2C_CONTROLLER_THROTTLER_VR_GFX, + I2C_CONTROLLER_THROTTLER_VR_SOC, + I2C_CONTROLLER_THROTTLER_VR_VDDCI, + I2C_CONTROLLER_THROTTLER_VR_MVDD, + I2C_CONTROLLER_THROTTLER_LIQUID0, + I2C_CONTROLLER_THROTTLER_LIQUID1, + I2C_CONTROLLER_THROTTLER_PLX, + I2C_CONTROLLER_THROTTLER_INA3221, + I2C_CONTROLLER_THROTTLER_COUNT, +} I2cControllerThrottler_e; + +typedef enum { + I2C_CONTROLLER_PROTOCOL_VR_XPDE132G5, + I2C_CONTROLLER_PROTOCOL_VR_IR35217, + I2C_CONTROLLER_PROTOCOL_TMP_TMP102A, + I2C_CONTROLLER_PROTOCOL_INA3221, + I2C_CONTROLLER_PROTOCOL_COUNT, +} I2cControllerProtocol_e; + +typedef struct { + uint8_t Enabled; + uint8_t Speed; + uint8_t SlaveAddress; + uint8_t ControllerPort; + uint8_t ControllerName; + uint8_t ThermalThrotter; + uint8_t I2cProtocol; + uint8_t PaddingConfig; +} I2cControllerConfig_t; + +typedef enum { + I2C_PORT_SVD_SCL = 0, + I2C_PORT_GPIO, +} I2cPort_e; + +typedef enum { + I2C_SPEED_FAST_50K = 0, //50 Kbits/s + I2C_SPEED_FAST_100K, //100 Kbits/s + I2C_SPEED_FAST_400K, //400 Kbits/s + I2C_SPEED_FAST_PLUS_1M, //1 Mbits/s (in fast mode) + I2C_SPEED_HIGH_1M, //1 Mbits/s (in high speed mode) + I2C_SPEED_HIGH_2M, //2.3 Mbits/s + I2C_SPEED_COUNT, +} I2cSpeed_e; + +typedef enum { + I2C_CMD_READ = 0, + I2C_CMD_WRITE, + I2C_CMD_COUNT, +} I2cCmdType_e; + +typedef enum { + FAN_MODE_AUTO = 0, + FAN_MODE_MANUAL_LINEAR, +} FanMode_e; + +#define CMDCONFIG_STOP_BIT 0 +#define CMDCONFIG_RESTART_BIT 1 +#define CMDCONFIG_READWRITE_BIT 2 //bit should be 0 for read, 1 for write + +#define CMDCONFIG_STOP_MASK (1 << CMDCONFIG_STOP_BIT) +#define CMDCONFIG_RESTART_MASK (1 << CMDCONFIG_RESTART_BIT) +#define CMDCONFIG_READWRITE_MASK (1 << CMDCONFIG_READWRITE_BIT) + +typedef struct { + uint8_t ReadWriteData; //Return data for read. Data to send for write + uint8_t CmdConfig; //Includes whether associated command should have a stop or restart command, and is a read or write +} SwI2cCmd_t; //SW I2C Command Table + +typedef struct { + uint8_t I2CcontrollerPort; //CKSVII2C0(0) or //CKSVII2C1(1) + uint8_t I2CSpeed; //Use I2cSpeed_e to indicate speed to select + uint8_t SlaveAddress; //Slave address of device + uint8_t NumCmds; //Number of commands + + SwI2cCmd_t SwI2cCmds[MAX_SW_I2C_COMMANDS]; +} SwI2cRequest_t; // SW I2C Request Table + +typedef struct { + SwI2cRequest_t SwI2cRequest; + + uint32_t Spare[8]; + uint32_t MmHubPadding[8]; // SMU internal use +} SwI2cRequestExternal_t; + +//D3HOT sequences +typedef enum { + BACO_SEQUENCE, + MSR_SEQUENCE, + BAMACO_SEQUENCE, + ULPS_SEQUENCE, + D3HOT_SEQUENCE_COUNT, +} D3HOTSequence_e; + +//THis is aligned with RSMU PGFSM Register Mapping +typedef enum { + PG_DYNAMIC_MODE = 0, + PG_STATIC_MODE, +} PowerGatingMode_e; + +//This is aligned with RSMU PGFSM Register Mapping +typedef enum { + PG_POWER_DOWN = 0, + PG_POWER_UP, +} PowerGatingSettings_e; + +typedef struct { + uint32_t a; // store in IEEE float format in this variable + uint32_t b; // store in IEEE float format in this variable + uint32_t c; // store in IEEE float format in this variable +} QuadraticInt_t; + +typedef struct { + uint32_t a; // store in fixed point, [31:20] signed integer, [19:0] fractional bits + uint32_t b; // store in fixed point, [31:20] signed integer, [19:0] fractional bits + uint32_t c; // store in fixed point, [31:20] signed integer, [19:0] fractional bits +} QuadraticFixedPoint_t; + +typedef struct { + uint32_t m; // store in IEEE float format in this variable + uint32_t b; // store in IEEE float format in this variable +} LinearInt_t; + +typedef struct { + uint32_t a; // store in IEEE float format in this variable + uint32_t b; // store in IEEE float format in this variable + uint32_t c; // store in IEEE float format in this variable +} DroopInt_t; + +//Piecewise linear droop model, Sienna_Cichlid currently used only for GFX DFLL +#define NUM_PIECE_WISE_LINEAR_DROOP_MODEL_VF_POINTS 5 +typedef enum { + PIECEWISE_LINEAR_FUSED_MODEL = 0, + PIECEWISE_LINEAR_PP_MODEL, + QUADRATIC_PP_MODEL, + PERPART_PIECEWISE_LINEAR_PP_MODEL, +} DfllDroopModelSelect_e; + +typedef struct { + uint32_t Fset[NUM_PIECE_WISE_LINEAR_DROOP_MODEL_VF_POINTS]; //in GHz, store in IEEE float format + uint32_t Vdroop[NUM_PIECE_WISE_LINEAR_DROOP_MODEL_VF_POINTS]; //in V , store in IEEE float format +}PiecewiseLinearDroopInt_t; + +typedef enum { + GFXCLK_SOURCE_PLL = 0, + GFXCLK_SOURCE_DFLL, + GFXCLK_SOURCE_COUNT, +} GFXCLK_SOURCE_e; + +//Only Clks that have DPM descriptors are listed here +typedef enum { + PPCLK_GFXCLK = 0, + PPCLK_SOCCLK, + PPCLK_UCLK, + PPCLK_FCLK, + PPCLK_DCLK_0, + PPCLK_VCLK_0, + PPCLK_DCLK_1, + PPCLK_VCLK_1, + PPCLK_DCEFCLK, + PPCLK_DISPCLK, + PPCLK_PIXCLK, + PPCLK_PHYCLK, + PPCLK_DTBCLK, + PPCLK_COUNT, +} PPCLK_e; + +typedef enum { + VOLTAGE_MODE_AVFS = 0, + VOLTAGE_MODE_AVFS_SS, + VOLTAGE_MODE_SS, + VOLTAGE_MODE_COUNT, +} VOLTAGE_MODE_e; + + +typedef enum { + AVFS_VOLTAGE_GFX = 0, + AVFS_VOLTAGE_SOC, + AVFS_VOLTAGE_COUNT, +} AVFS_VOLTAGE_TYPE_e; + +typedef enum { + UCLK_DIV_BY_1 = 0, + UCLK_DIV_BY_2, + UCLK_DIV_BY_4, + UCLK_DIV_BY_8, +} UCLK_DIV_e; + +typedef enum { + GPIO_INT_POLARITY_ACTIVE_LOW = 0, + GPIO_INT_POLARITY_ACTIVE_HIGH, +} GpioIntPolarity_e; + +typedef enum { + PWR_CONFIG_TDP = 0, + PWR_CONFIG_TGP, + PWR_CONFIG_TCP_ESTIMATED, + PWR_CONFIG_TCP_MEASURED, +} PwrConfig_e; + +typedef enum { + XGMI_LINK_RATE_2 = 2, // 2Gbps + XGMI_LINK_RATE_4 = 4, // 4Gbps + XGMI_LINK_RATE_8 = 8, // 8Gbps + XGMI_LINK_RATE_12 = 12, // 12Gbps + XGMI_LINK_RATE_16 = 16, // 16Gbps + XGMI_LINK_RATE_17 = 17, // 17Gbps + XGMI_LINK_RATE_18 = 18, // 18Gbps + XGMI_LINK_RATE_19 = 19, // 19Gbps + XGMI_LINK_RATE_20 = 20, // 20Gbps + XGMI_LINK_RATE_21 = 21, // 21Gbps + XGMI_LINK_RATE_22 = 22, // 22Gbps + XGMI_LINK_RATE_23 = 23, // 23Gbps + XGMI_LINK_RATE_24 = 24, // 24Gbps + XGMI_LINK_RATE_25 = 25, // 25Gbps + XGMI_LINK_RATE_COUNT +} XGMI_LINK_RATE_e; + +typedef enum { + XGMI_LINK_WIDTH_1 = 0, // x1 + XGMI_LINK_WIDTH_2, // x2 + XGMI_LINK_WIDTH_4, // x4 + XGMI_LINK_WIDTH_8, // x8 + XGMI_LINK_WIDTH_9, // x9 + XGMI_LINK_WIDTH_16, // x16 + XGMI_LINK_WIDTH_COUNT +} XGMI_LINK_WIDTH_e; + +typedef struct { + uint8_t VoltageMode; // 0 - AVFS only, 1- min(AVFS,SS), 2-SS only + uint8_t SnapToDiscrete; // 0 - Fine grained DPM, 1 - Discrete DPM + uint8_t NumDiscreteLevels; // Set to 2 (Fmin, Fmax) when using fine grained DPM, otherwise set to # discrete levels used + uint8_t Padding; + LinearInt_t ConversionToAvfsClk; // Transfer function to AVFS Clock (GHz->GHz) + QuadraticInt_t SsCurve; // Slow-slow curve (GHz->V) + uint16_t SsFmin; // Fmin for SS curve. If SS curve is selected, will use V@SSFmin for F <= Fmin + uint16_t Padding16; +} DpmDescriptor_t; + +typedef enum { + PPT_THROTTLER_PPT0, + PPT_THROTTLER_PPT1, + PPT_THROTTLER_PPT2, + PPT_THROTTLER_PPT3, + PPT_THROTTLER_COUNT +} PPT_THROTTLER_e; + +typedef enum { + TEMP_EDGE, + TEMP_HOTSPOT, + TEMP_MEM, + TEMP_VR_GFX, + TEMP_VR_MEM0, + TEMP_VR_MEM1, + TEMP_VR_SOC, + TEMP_LIQUID0, + TEMP_LIQUID1, + TEMP_PLX, + TEMP_COUNT, +} TEMP_e; + +typedef enum { + TDC_THROTTLER_GFX, + TDC_THROTTLER_SOC, + TDC_THROTTLER_COUNT +} TDC_THROTTLER_e; + +typedef enum { + CUSTOMER_VARIANT_ROW, + CUSTOMER_VARIANT_FALCON, + CUSTOMER_VARIANT_COUNT, +} CUSTOMER_VARIANT_e; + +// Used for 2-step UCLK DPM change workaround +typedef struct { + uint16_t Fmin; + uint16_t Fmax; +} UclkDpmChangeRange_t; + +typedef struct { + // MAJOR SECTION: SKU PARAMETERS + + uint32_t Version; + + // SECTION: Feature Enablement + uint32_t FeaturesToRun[NUM_FEATURES / 32]; + + // SECTION: Infrastructure Limits + uint16_t SocketPowerLimitAc[PPT_THROTTLER_COUNT]; // Watts + uint16_t SocketPowerLimitAcTau[PPT_THROTTLER_COUNT]; // Time constant of LPF in ms + uint16_t SocketPowerLimitDc[PPT_THROTTLER_COUNT]; // Watts + uint16_t SocketPowerLimitDcTau[PPT_THROTTLER_COUNT]; // Time constant of LPF in ms + + uint16_t TdcLimit[TDC_THROTTLER_COUNT]; // Amps + uint16_t TdcLimitTau[TDC_THROTTLER_COUNT]; // Time constant of LPF in ms + + uint16_t TemperatureLimit[TEMP_COUNT]; // Celcius + + uint32_t FitLimit; // Failures in time (failures per million parts over the defined lifetime) + + // SECTION: Power Configuration + uint8_t TotalPowerConfig; //0-TDP, 1-TGP, 2-TCP Estimated, 3-TCP Measured. Use defines from PwrConfig_e + uint8_t TotalPowerPadding[3]; + + // SECTION: APCC Settings + uint32_t ApccPlusResidencyLimit; + + //SECTION: SMNCLK DPM + uint16_t SmnclkDpmFreq [NUM_SMNCLK_DPM_LEVELS]; // in MHz + uint16_t SmnclkDpmVoltage [NUM_SMNCLK_DPM_LEVELS]; // mV(Q2) + + uint32_t PaddingAPCC; + uint16_t PerPartDroopVsetGfxDfll[NUM_PIECE_WISE_LINEAR_DROOP_MODEL_VF_POINTS]; //In mV(Q2) + uint16_t PaddingPerPartDroop; + + // SECTION: Throttler settings + uint32_t ThrottlerControlMask; // See Throtter masks defines + + // SECTION: FW DSTATE Settings + uint32_t FwDStateMask; // See FW DState masks defines + + // SECTION: ULV Settings + uint16_t UlvVoltageOffsetSoc; // In mV(Q2) + uint16_t UlvVoltageOffsetGfx; // In mV(Q2) + + uint16_t MinVoltageUlvGfx; // In mV(Q2) Minimum Voltage ("Vmin") of VDD_GFX in ULV mode + uint16_t MinVoltageUlvSoc; // In mV(Q2) Minimum Voltage ("Vmin") of VDD_SOC in ULV mode + + uint16_t SocLIVmin; // In mV(Q2) Long Idle Vmin (deep ULV), for VDD_SOC + uint16_t PaddingLIVmin; + + uint8_t GceaLinkMgrIdleThreshold; //Set by SMU FW during enablment of GFXOFF. Controls delay for GFX SDP port disconnection during idle events + uint8_t paddingRlcUlvParams[3]; + + // SECTION: Voltage Control Parameters + uint16_t MinVoltageGfx; // In mV(Q2) Minimum Voltage ("Vmin") of VDD_GFX + uint16_t MinVoltageSoc; // In mV(Q2) Minimum Voltage ("Vmin") of VDD_SOC + uint16_t MaxVoltageGfx; // In mV(Q2) Maximum Voltage allowable of VDD_GFX + uint16_t MaxVoltageSoc; // In mV(Q2) Maximum Voltage allowable of VDD_SOC + + uint16_t LoadLineResistanceGfx; // In mOhms with 8 fractional bits + uint16_t LoadLineResistanceSoc; // In mOhms with 8 fractional bits + + // SECTION: Temperature Dependent Vmin + uint16_t VDDGFX_TVmin; //Celcius + uint16_t VDDSOC_TVmin; //Celcius + uint16_t VDDGFX_Vmin_HiTemp; // mV Q2 + uint16_t VDDGFX_Vmin_LoTemp; // mV Q2 + uint16_t VDDSOC_Vmin_HiTemp; // mV Q2 + uint16_t VDDSOC_Vmin_LoTemp; // mV Q2 + + uint16_t VDDGFX_TVminHystersis; // Celcius + uint16_t VDDSOC_TVminHystersis; // Celcius + + //SECTION: DPM Config 1 + DpmDescriptor_t DpmDescriptor[PPCLK_COUNT]; + + uint16_t FreqTableGfx [NUM_GFXCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableVclk [NUM_VCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableDclk [NUM_DCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableSocclk [NUM_SOCCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableUclk [NUM_UCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableDcefclk [NUM_DCEFCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableDispclk [NUM_DISPCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTablePixclk [NUM_PIXCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTablePhyclk [NUM_PHYCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableDtbclk [NUM_DTBCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableFclk [NUM_FCLK_DPM_LEVELS ]; // In MHz + uint32_t Paddingclks; + + DroopInt_t PerPartDroopModelGfxDfll[NUM_PIECE_WISE_LINEAR_DROOP_MODEL_VF_POINTS]; //GHz ->Vstore in IEEE float format + + uint32_t DcModeMaxFreq [PPCLK_COUNT ]; // In MHz + + uint8_t FreqTableUclkDiv [NUM_UCLK_DPM_LEVELS ]; // 0:Div-1, 1:Div-1/2, 2:Div-1/4, 3:Div-1/8 + + // Used for MALL performance boost + uint16_t FclkBoostFreq; // In Mhz + uint16_t FclkParamPadding; + + // SECTION: DPM Config 2 + uint16_t Mp0clkFreq [NUM_MP0CLK_DPM_LEVELS]; // in MHz + uint16_t Mp0DpmVoltage [NUM_MP0CLK_DPM_LEVELS]; // mV(Q2) + uint16_t MemVddciVoltage [NUM_UCLK_DPM_LEVELS]; // mV(Q2) + uint16_t MemMvddVoltage [NUM_UCLK_DPM_LEVELS]; // mV(Q2) + // GFXCLK DPM + uint16_t GfxclkFgfxoffEntry; // in Mhz + uint16_t GfxclkFinit; // in Mhz + uint16_t GfxclkFidle; // in MHz + uint8_t GfxclkSource; // 0 = PLL, 1 = DFLL + uint8_t GfxclkPadding; + + // GFX GPO + uint8_t GfxGpoSubFeatureMask; // bit 0 = PACE, bit 1 = DEM + uint8_t GfxGpoEnabledWorkPolicyMask; //Any policy that GPO can be enabled + uint8_t GfxGpoDisabledWorkPolicyMask; //Any policy that GPO can be disabled + uint8_t GfxGpoPadding[1]; + uint32_t GfxGpoVotingAllow; //For indicating which feature changes should result in a GPO table recalculation + + uint32_t GfxGpoPadding32[4]; + + uint16_t GfxDcsFopt; // Optimal GFXCLK for DCS in Mhz + uint16_t GfxDcsFclkFopt; // Optimal FCLK for DCS in Mhz + uint16_t GfxDcsUclkFopt; // Optimal UCLK for DCS in Mhz + + uint16_t DcsGfxOffVoltage; //Voltage in mV(Q2) applied to VDDGFX when entering DCS GFXOFF phase + + uint16_t DcsMinGfxOffTime; //Minimum amount of time PMFW shuts GFX OFF as part of GFX DCS phase + uint16_t DcsMaxGfxOffTime; //Maximum amount of time PMFW can shut GFX OFF as part of GFX DCS phase at a stretch. + + uint32_t DcsMinCreditAccum; //Min amount of positive credit accumulation before waking GFX up as part of DCS. + + uint16_t DcsExitHysteresis; //The min amount of time power credit accumulator should have a value > 0 before SMU exits the DCS throttling phase. + uint16_t DcsTimeout; //This is the amount of time SMU FW waits for RLC to put GFX into GFXOFF before reverting to the fallback mechanism of throttling GFXCLK to Fmin. + + uint32_t DcsParamPadding[5]; + + uint16_t FlopsPerByteTable[RLC_PACE_TABLE_NUM_LEVELS]; // Q8.8 + + // UCLK section + uint8_t LowestUclkReservedForUlv; // Set this to 1 if UCLK DPM0 is reserved for ULV-mode only + uint8_t PaddingMem[3]; + + uint8_t UclkDpmPstates [NUM_UCLK_DPM_LEVELS]; // 4 DPM states, 0-P0, 1-P1, 2-P2, 3-P3. + + // Used for 2-Step UCLK change workaround + UclkDpmChangeRange_t UclkDpmSrcFreqRange; // In Mhz + UclkDpmChangeRange_t UclkDpmTargFreqRange; // In Mhz + uint16_t UclkDpmMidstepFreq; // In Mhz + uint16_t UclkMidstepPadding; + + // Link DPM Settings + uint8_t PcieGenSpeed[NUM_LINK_LEVELS]; ///< 0:PciE-gen1 1:PciE-gen2 2:PciE-gen3 3:PciE-gen4 + uint8_t PcieLaneCount[NUM_LINK_LEVELS]; ///< 1=x1, 2=x2, 3=x4, 4=x8, 5=x12, 6=x16 + uint16_t LclkFreq[NUM_LINK_LEVELS]; + + // SECTION: Fan Control + uint16_t FanStopTemp; //Celcius + uint16_t FanStartTemp; //Celcius + + uint16_t FanGain[TEMP_COUNT]; + + uint16_t FanPwmMin; + uint16_t FanAcousticLimitRpm; + uint16_t FanThrottlingRpm; + uint16_t FanMaximumRpm; + uint16_t MGpuFanBoostLimitRpm; + uint16_t FanTargetTemperature; + uint16_t FanTargetGfxclk; + uint16_t FanPadding16; + uint8_t FanTempInputSelect; + uint8_t FanPadding; + uint8_t FanZeroRpmEnable; + uint8_t FanTachEdgePerRev; + + // The following are AFC override parameters. Leave at 0 to use FW defaults. + int16_t FuzzyFan_ErrorSetDelta; + int16_t FuzzyFan_ErrorRateSetDelta; + int16_t FuzzyFan_PwmSetDelta; + uint16_t FuzzyFan_Reserved; + + // SECTION: AVFS + // Overrides + uint8_t OverrideAvfsGb[AVFS_VOLTAGE_COUNT]; + uint8_t dBtcGbGfxDfllModelSelect; //0 -> fused piece-wise model, 1 -> piece-wise linear(PPTable), 2 -> quadratic model(PPTable) + uint8_t Padding8_Avfs; + + QuadraticInt_t qAvfsGb[AVFS_VOLTAGE_COUNT]; // GHz->V Override of fused curve + DroopInt_t dBtcGbGfxPll; // GHz->V BtcGb + DroopInt_t dBtcGbGfxDfll; // GHz->V BtcGb + DroopInt_t dBtcGbSoc; // GHz->V BtcGb + LinearInt_t qAgingGb[AVFS_VOLTAGE_COUNT]; // GHz->V + + PiecewiseLinearDroopInt_t PiecewiseLinearDroopIntGfxDfll; //GHz ->Vstore in IEEE float format + + QuadraticInt_t qStaticVoltageOffset[AVFS_VOLTAGE_COUNT]; // GHz->V + + uint16_t DcTol[AVFS_VOLTAGE_COUNT]; // mV Q2 + + uint8_t DcBtcEnabled[AVFS_VOLTAGE_COUNT]; + uint8_t Padding8_GfxBtc[2]; + + uint16_t DcBtcMin[AVFS_VOLTAGE_COUNT]; // mV Q2 + uint16_t DcBtcMax[AVFS_VOLTAGE_COUNT]; // mV Q2 + + uint16_t DcBtcGb[AVFS_VOLTAGE_COUNT]; // mV Q2 + + // SECTION: XGMI + uint8_t XgmiDpmPstates[NUM_XGMI_LEVELS]; // 2 DPM states, high and low. 0-P0, 1-P1, 2-P2, 3-P3. + uint8_t XgmiDpmSpare[2]; + + // SECTION: Advanced Options + uint32_t DebugOverrides; + QuadraticInt_t ReservedEquation0; + QuadraticInt_t ReservedEquation1; + QuadraticInt_t ReservedEquation2; + QuadraticInt_t ReservedEquation3; + + // SECTION: Sku Reserved + uint8_t CustomerVariant; + + //VC BTC parameters are only applicable to VDD_GFX domain + uint8_t VcBtcEnabled; + uint16_t VcBtcVminT0; // T0_VMIN + uint16_t VcBtcFixedVminAgingOffset; // FIXED_VMIN_AGING_OFFSET + uint16_t VcBtcVmin2PsmDegrationGb; // VMIN_TO_PSM_DEGRADATION_GB + uint32_t VcBtcPsmA; // A_PSM + uint32_t VcBtcPsmB; // B_PSM + uint32_t VcBtcVminA; // A_VMIN + uint32_t VcBtcVminB; // B_VMIN + + //GPIO Board feature + uint16_t LedGpio; //GeneriA GPIO flag used to control the radeon LEDs + uint16_t GfxPowerStagesGpio; //Genlk_vsync GPIO flag used to control gfx power stages + + uint32_t SkuReserved[8]; + + + // MAJOR SECTION: BOARD PARAMETERS + + //SECTION: Gaming Clocks + uint32_t GamingClk[6]; + + // SECTION: I2C Control + I2cControllerConfig_t I2cControllers[NUM_I2C_CONTROLLERS]; + + uint8_t GpioScl; // GPIO Number for SCL Line, used only for CKSVII2C1 + uint8_t GpioSda; // GPIO Number for SDA Line, used only for CKSVII2C1 + uint8_t FchUsbPdSlaveAddr; //For requesting USB PD controller S-states via FCH I2C when entering PME turn off + uint8_t I2cSpare[1]; + + // SECTION: SVI2 Board Parameters + uint8_t VddGfxVrMapping; // Use VR_MAPPING* bitfields + uint8_t VddSocVrMapping; // Use VR_MAPPING* bitfields + uint8_t VddMem0VrMapping; // Use VR_MAPPING* bitfields + uint8_t VddMem1VrMapping; // Use VR_MAPPING* bitfields + + uint8_t GfxUlvPhaseSheddingMask; // set this to 1 to set PSI0/1 to 1 in ULV mode + uint8_t SocUlvPhaseSheddingMask; // set this to 1 to set PSI0/1 to 1 in ULV mode + uint8_t VddciUlvPhaseSheddingMask; // set this to 1 to set PSI0/1 to 1 in ULV mode + uint8_t MvddUlvPhaseSheddingMask; // set this to 1 to set PSI0/1 to 1 in ULV mode + + // SECTION: Telemetry Settings + uint16_t GfxMaxCurrent; // in Amps + int8_t GfxOffset; // in Amps + uint8_t Padding_TelemetryGfx; + + uint16_t SocMaxCurrent; // in Amps + int8_t SocOffset; // in Amps + uint8_t Padding_TelemetrySoc; + + uint16_t Mem0MaxCurrent; // in Amps + int8_t Mem0Offset; // in Amps + uint8_t Padding_TelemetryMem0; + + uint16_t Mem1MaxCurrent; // in Amps + int8_t Mem1Offset; // in Amps + uint8_t Padding_TelemetryMem1; + + uint32_t MvddRatio; // This is used for MVDD Svi2 Div Ratio workaround. It has 16 fractional bits (Q16.16) + + // SECTION: GPIO Settings + uint8_t AcDcGpio; // GPIO pin configured for AC/DC switching + uint8_t AcDcPolarity; // GPIO polarity for AC/DC switching + uint8_t VR0HotGpio; // GPIO pin configured for VR0 HOT event + uint8_t VR0HotPolarity; // GPIO polarity for VR0 HOT event + + uint8_t VR1HotGpio; // GPIO pin configured for VR1 HOT event + uint8_t VR1HotPolarity; // GPIO polarity for VR1 HOT event + uint8_t GthrGpio; // GPIO pin configured for GTHR Event + uint8_t GthrPolarity; // replace GPIO polarity for GTHR + + // LED Display Settings + uint8_t LedPin0; // GPIO number for LedPin[0] + uint8_t LedPin1; // GPIO number for LedPin[1] + uint8_t LedPin2; // GPIO number for LedPin[2] + uint8_t LedEnableMask; + + uint8_t LedPcie; // GPIO number for PCIE results + uint8_t LedError; // GPIO number for Error Cases + uint8_t LedSpare1[2]; + + // SECTION: Clock Spread Spectrum + + // GFXCLK PLL Spread Spectrum + uint8_t PllGfxclkSpreadEnabled; // on or off + uint8_t PllGfxclkSpreadPercent; // Q4.4 + uint16_t PllGfxclkSpreadFreq; // kHz + + // GFXCLK DFLL Spread Spectrum + uint8_t DfllGfxclkSpreadEnabled; // on or off + uint8_t DfllGfxclkSpreadPercent; // Q4.4 + uint16_t DfllGfxclkSpreadFreq; // kHz + + // UCLK Spread Spectrum + uint16_t UclkSpreadPadding; + uint16_t UclkSpreadFreq; // kHz + + // FCLK Spread Spectrum + uint8_t FclkSpreadEnabled; // on or off + uint8_t FclkSpreadPercent; // Q4.4 + uint16_t FclkSpreadFreq; // kHz + + // Section: Memory Config + uint32_t MemoryChannelEnabled; // For DRAM use only, Max 32 channels enabled bit mask. + + uint8_t DramBitWidth; // For DRAM use only. See Dram Bit width type defines + uint8_t PaddingMem1[3]; + + // Section: Total Board Power + uint16_t TotalBoardPower; //Only needed for TCP Estimated case, where TCP = TGP+Total Board Power + uint16_t BoardPowerPadding; + + // SECTION: XGMI Training + uint8_t XgmiLinkSpeed [NUM_XGMI_PSTATE_LEVELS]; + uint8_t XgmiLinkWidth [NUM_XGMI_PSTATE_LEVELS]; + + uint16_t XgmiFclkFreq [NUM_XGMI_PSTATE_LEVELS]; + uint16_t XgmiSocVoltage [NUM_XGMI_PSTATE_LEVELS]; + + // SECTION: UMC feature flags + uint8_t HsrEnabled; + uint8_t VddqOffEnabled; + uint8_t PaddingUmcFlags[2]; + + // UCLK Spread Spectrum + uint8_t UclkSpreadPercent[16]; + + // SECTION: Board Reserved + uint32_t BoardReserved[11]; + + // SECTION: Structure Padding + + // Padding for MMHUB - do not modify this + uint32_t MmHubPadding[8]; // SMU internal use + +} PPTable_t; + +typedef struct { + // MAJOR SECTION: SKU PARAMETERS + + uint32_t Version; + + // SECTION: Feature Enablement + uint32_t FeaturesToRun[NUM_FEATURES / 32]; + + // SECTION: Infrastructure Limits + uint16_t SocketPowerLimitAc[PPT_THROTTLER_COUNT]; // Watts + uint16_t SocketPowerLimitAcTau[PPT_THROTTLER_COUNT]; // Time constant of LPF in ms + uint16_t SocketPowerLimitDc[PPT_THROTTLER_COUNT]; // Watts + uint16_t SocketPowerLimitDcTau[PPT_THROTTLER_COUNT]; // Time constant of LPF in ms + + uint16_t TdcLimit[TDC_THROTTLER_COUNT]; // Amps + uint16_t TdcLimitTau[TDC_THROTTLER_COUNT]; // Time constant of LPF in ms + + uint16_t TemperatureLimit[TEMP_COUNT]; // Celcius + + uint32_t FitLimit; // Failures in time (failures per million parts over the defined lifetime) + + // SECTION: Power Configuration + uint8_t TotalPowerConfig; //0-TDP, 1-TGP, 2-TCP Estimated, 3-TCP Measured. Use defines from PwrConfig_e + uint8_t TotalPowerPadding[3]; + + // SECTION: APCC Settings + uint32_t ApccPlusResidencyLimit; + + //SECTION: SMNCLK DPM + uint16_t SmnclkDpmFreq [NUM_SMNCLK_DPM_LEVELS]; // in MHz + uint16_t SmnclkDpmVoltage [NUM_SMNCLK_DPM_LEVELS]; // mV(Q2) + + uint32_t PaddingAPCC; + uint16_t PerPartDroopVsetGfxDfll[NUM_PIECE_WISE_LINEAR_DROOP_MODEL_VF_POINTS]; //In mV(Q2) + uint16_t PaddingPerPartDroop; + + // SECTION: Throttler settings + uint32_t ThrottlerControlMask; // See Throtter masks defines + + // SECTION: FW DSTATE Settings + uint32_t FwDStateMask; // See FW DState masks defines + + // SECTION: ULV Settings + uint16_t UlvVoltageOffsetSoc; // In mV(Q2) + uint16_t UlvVoltageOffsetGfx; // In mV(Q2) + + uint16_t MinVoltageUlvGfx; // In mV(Q2) Minimum Voltage ("Vmin") of VDD_GFX in ULV mode + uint16_t MinVoltageUlvSoc; // In mV(Q2) Minimum Voltage ("Vmin") of VDD_SOC in ULV mode + + uint16_t SocLIVmin; + uint16_t SocLIVminoffset; + + uint8_t GceaLinkMgrIdleThreshold; //Set by SMU FW during enablment of GFXOFF. Controls delay for GFX SDP port disconnection during idle events + uint8_t paddingRlcUlvParams[3]; + + // SECTION: Voltage Control Parameters + uint16_t MinVoltageGfx; // In mV(Q2) Minimum Voltage ("Vmin") of VDD_GFX + uint16_t MinVoltageSoc; // In mV(Q2) Minimum Voltage ("Vmin") of VDD_SOC + uint16_t MaxVoltageGfx; // In mV(Q2) Maximum Voltage allowable of VDD_GFX + uint16_t MaxVoltageSoc; // In mV(Q2) Maximum Voltage allowable of VDD_SOC + + uint16_t LoadLineResistanceGfx; // In mOhms with 8 fractional bits + uint16_t LoadLineResistanceSoc; // In mOhms with 8 fractional bits + + // SECTION: Temperature Dependent Vmin + uint16_t VDDGFX_TVmin; //Celcius + uint16_t VDDSOC_TVmin; //Celcius + uint16_t VDDGFX_Vmin_HiTemp; // mV Q2 + uint16_t VDDGFX_Vmin_LoTemp; // mV Q2 + uint16_t VDDSOC_Vmin_HiTemp; // mV Q2 + uint16_t VDDSOC_Vmin_LoTemp; // mV Q2 + + uint16_t VDDGFX_TVminHystersis; // Celcius + uint16_t VDDSOC_TVminHystersis; // Celcius + + //SECTION: DPM Config 1 + DpmDescriptor_t DpmDescriptor[PPCLK_COUNT]; + + uint16_t FreqTableGfx [NUM_GFXCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableVclk [NUM_VCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableDclk [NUM_DCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableSocclk [NUM_SOCCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableUclk [NUM_UCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableDcefclk [NUM_DCEFCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableDispclk [NUM_DISPCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTablePixclk [NUM_PIXCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTablePhyclk [NUM_PHYCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableDtbclk [NUM_DTBCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableFclk [NUM_FCLK_DPM_LEVELS ]; // In MHz + uint32_t Paddingclks; + + DroopInt_t PerPartDroopModelGfxDfll[NUM_PIECE_WISE_LINEAR_DROOP_MODEL_VF_POINTS]; //GHz ->Vstore in IEEE float format + + uint32_t DcModeMaxFreq [PPCLK_COUNT ]; // In MHz + + uint8_t FreqTableUclkDiv [NUM_UCLK_DPM_LEVELS ]; // 0:Div-1, 1:Div-1/2, 2:Div-1/4, 3:Div-1/8 + + // Used for MALL performance boost + uint16_t FclkBoostFreq; // In Mhz + uint16_t FclkParamPadding; + + // SECTION: DPM Config 2 + uint16_t Mp0clkFreq [NUM_MP0CLK_DPM_LEVELS]; // in MHz + uint16_t Mp0DpmVoltage [NUM_MP0CLK_DPM_LEVELS]; // mV(Q2) + uint16_t MemVddciVoltage [NUM_UCLK_DPM_LEVELS]; // mV(Q2) + uint16_t MemMvddVoltage [NUM_UCLK_DPM_LEVELS]; // mV(Q2) + // GFXCLK DPM + uint16_t GfxclkFgfxoffEntry; // in Mhz + uint16_t GfxclkFinit; // in Mhz + uint16_t GfxclkFidle; // in MHz + uint8_t GfxclkSource; // 0 = PLL, 1 = DFLL + uint8_t GfxclkPadding; + + // GFX GPO + uint8_t GfxGpoSubFeatureMask; // bit 0 = PACE, bit 1 = DEM + uint8_t GfxGpoEnabledWorkPolicyMask; //Any policy that GPO can be enabled + uint8_t GfxGpoDisabledWorkPolicyMask; //Any policy that GPO can be disabled + uint8_t GfxGpoPadding[1]; + uint32_t GfxGpoVotingAllow; //For indicating which feature changes should result in a GPO table recalculation + + uint32_t GfxGpoPadding32[4]; + + uint16_t GfxDcsFopt; // Optimal GFXCLK for DCS in Mhz + uint16_t GfxDcsFclkFopt; // Optimal FCLK for DCS in Mhz + uint16_t GfxDcsUclkFopt; // Optimal UCLK for DCS in Mhz + + uint16_t DcsGfxOffVoltage; //Voltage in mV(Q2) applied to VDDGFX when entering DCS GFXOFF phase + + uint16_t DcsMinGfxOffTime; //Minimum amount of time PMFW shuts GFX OFF as part of GFX DCS phase + uint16_t DcsMaxGfxOffTime; //Maximum amount of time PMFW can shut GFX OFF as part of GFX DCS phase at a stretch. + + uint32_t DcsMinCreditAccum; //Min amount of positive credit accumulation before waking GFX up as part of DCS. + + uint16_t DcsExitHysteresis; //The min amount of time power credit accumulator should have a value > 0 before SMU exits the DCS throttling phase. + uint16_t DcsTimeout; //This is the amount of time SMU FW waits for RLC to put GFX into GFXOFF before reverting to the fallback mechanism of throttling GFXCLK to Fmin. + + uint32_t DcsParamPadding[5]; + + uint16_t FlopsPerByteTable[RLC_PACE_TABLE_NUM_LEVELS]; // Q8.8 + + // UCLK section + uint8_t LowestUclkReservedForUlv; // Set this to 1 if UCLK DPM0 is reserved for ULV-mode only + uint8_t PaddingMem[3]; + + uint8_t UclkDpmPstates [NUM_UCLK_DPM_LEVELS]; // 4 DPM states, 0-P0, 1-P1, 2-P2, 3-P3. + + // Used for 2-Step UCLK change workaround + UclkDpmChangeRange_t UclkDpmSrcFreqRange; // In Mhz + UclkDpmChangeRange_t UclkDpmTargFreqRange; // In Mhz + uint16_t UclkDpmMidstepFreq; // In Mhz + uint16_t UclkMidstepPadding; + + // Link DPM Settings + uint8_t PcieGenSpeed[NUM_LINK_LEVELS]; ///< 0:PciE-gen1 1:PciE-gen2 2:PciE-gen3 3:PciE-gen4 + uint8_t PcieLaneCount[NUM_LINK_LEVELS]; ///< 1=x1, 2=x2, 3=x4, 4=x8, 5=x12, 6=x16 + uint16_t LclkFreq[NUM_LINK_LEVELS]; + + // SECTION: Fan Control + uint16_t FanStopTemp; //Celcius + uint16_t FanStartTemp; //Celcius + + uint16_t FanGain[TEMP_COUNT]; + + uint16_t FanPwmMin; + uint16_t FanAcousticLimitRpm; + uint16_t FanThrottlingRpm; + uint16_t FanMaximumRpm; + uint16_t MGpuFanBoostLimitRpm; + uint16_t FanTargetTemperature; + uint16_t FanTargetGfxclk; + uint16_t FanPadding16; + uint8_t FanTempInputSelect; + uint8_t FanPadding; + uint8_t FanZeroRpmEnable; + uint8_t FanTachEdgePerRev; + + // The following are AFC override parameters. Leave at 0 to use FW defaults. + int16_t FuzzyFan_ErrorSetDelta; + int16_t FuzzyFan_ErrorRateSetDelta; + int16_t FuzzyFan_PwmSetDelta; + uint16_t FuzzyFan_Reserved; + + // SECTION: AVFS + // Overrides + uint8_t OverrideAvfsGb[AVFS_VOLTAGE_COUNT]; + uint8_t dBtcGbGfxDfllModelSelect; //0 -> fused piece-wise model, 1 -> piece-wise linear(PPTable), 2 -> quadratic model(PPTable) + uint8_t Padding8_Avfs; + + QuadraticInt_t qAvfsGb[AVFS_VOLTAGE_COUNT]; // GHz->V Override of fused curve + DroopInt_t dBtcGbGfxPll; // GHz->V BtcGb + DroopInt_t dBtcGbGfxDfll; // GHz->V BtcGb + DroopInt_t dBtcGbSoc; // GHz->V BtcGb + LinearInt_t qAgingGb[AVFS_VOLTAGE_COUNT]; // GHz->V + + PiecewiseLinearDroopInt_t PiecewiseLinearDroopIntGfxDfll; //GHz ->Vstore in IEEE float format + + QuadraticInt_t qStaticVoltageOffset[AVFS_VOLTAGE_COUNT]; // GHz->V + + uint16_t DcTol[AVFS_VOLTAGE_COUNT]; // mV Q2 + + uint8_t DcBtcEnabled[AVFS_VOLTAGE_COUNT]; + uint8_t Padding8_GfxBtc[2]; + + uint16_t DcBtcMin[AVFS_VOLTAGE_COUNT]; // mV Q2 + uint16_t DcBtcMax[AVFS_VOLTAGE_COUNT]; // mV Q2 + + uint16_t DcBtcGb[AVFS_VOLTAGE_COUNT]; // mV Q2 + + // SECTION: XGMI + uint8_t XgmiDpmPstates[NUM_XGMI_LEVELS]; // 2 DPM states, high and low. 0-P0, 1-P1, 2-P2, 3-P3. + uint8_t XgmiDpmSpare[2]; + + // SECTION: Advanced Options + uint32_t DebugOverrides; + QuadraticInt_t ReservedEquation0; + QuadraticInt_t ReservedEquation1; + QuadraticInt_t ReservedEquation2; + QuadraticInt_t ReservedEquation3; + + // SECTION: Sku Reserved + uint8_t CustomerVariant; + + //VC BTC parameters are only applicable to VDD_GFX domain + uint8_t VcBtcEnabled; + uint16_t VcBtcVminT0; // T0_VMIN + uint16_t VcBtcFixedVminAgingOffset; // FIXED_VMIN_AGING_OFFSET + uint16_t VcBtcVmin2PsmDegrationGb; // VMIN_TO_PSM_DEGRADATION_GB + uint32_t VcBtcPsmA; // A_PSM + uint32_t VcBtcPsmB; // B_PSM + uint32_t VcBtcVminA; // A_VMIN + uint32_t VcBtcVminB; // B_VMIN + + //GPIO Board feature + uint16_t LedGpio; //GeneriA GPIO flag used to control the radeon LEDs + uint16_t GfxPowerStagesGpio; //Genlk_vsync GPIO flag used to control gfx power stages + + uint32_t SkuReserved[63]; + + + + // MAJOR SECTION: BOARD PARAMETERS + + //SECTION: Gaming Clocks + uint32_t GamingClk[6]; + + // SECTION: I2C Control + I2cControllerConfig_t I2cControllers[NUM_I2C_CONTROLLERS]; + + uint8_t GpioScl; // GPIO Number for SCL Line, used only for CKSVII2C1 + uint8_t GpioSda; // GPIO Number for SDA Line, used only for CKSVII2C1 + uint8_t FchUsbPdSlaveAddr; //For requesting USB PD controller S-states via FCH I2C when entering PME turn off + uint8_t I2cSpare[1]; + + // SECTION: SVI2 Board Parameters + uint8_t VddGfxVrMapping; // Use VR_MAPPING* bitfields + uint8_t VddSocVrMapping; // Use VR_MAPPING* bitfields + uint8_t VddMem0VrMapping; // Use VR_MAPPING* bitfields + uint8_t VddMem1VrMapping; // Use VR_MAPPING* bitfields + + uint8_t GfxUlvPhaseSheddingMask; // set this to 1 to set PSI0/1 to 1 in ULV mode + uint8_t SocUlvPhaseSheddingMask; // set this to 1 to set PSI0/1 to 1 in ULV mode + uint8_t VddciUlvPhaseSheddingMask; // set this to 1 to set PSI0/1 to 1 in ULV mode + uint8_t MvddUlvPhaseSheddingMask; // set this to 1 to set PSI0/1 to 1 in ULV mode + + // SECTION: Telemetry Settings + uint16_t GfxMaxCurrent; // in Amps + int8_t GfxOffset; // in Amps + uint8_t Padding_TelemetryGfx; + + uint16_t SocMaxCurrent; // in Amps + int8_t SocOffset; // in Amps + uint8_t Padding_TelemetrySoc; + + uint16_t Mem0MaxCurrent; // in Amps + int8_t Mem0Offset; // in Amps + uint8_t Padding_TelemetryMem0; + + uint16_t Mem1MaxCurrent; // in Amps + int8_t Mem1Offset; // in Amps + uint8_t Padding_TelemetryMem1; + + uint32_t MvddRatio; // This is used for MVDD Svi2 Div Ratio workaround. It has 16 fractional bits (Q16.16) + + // SECTION: GPIO Settings + uint8_t AcDcGpio; // GPIO pin configured for AC/DC switching + uint8_t AcDcPolarity; // GPIO polarity for AC/DC switching + uint8_t VR0HotGpio; // GPIO pin configured for VR0 HOT event + uint8_t VR0HotPolarity; // GPIO polarity for VR0 HOT event + + uint8_t VR1HotGpio; // GPIO pin configured for VR1 HOT event + uint8_t VR1HotPolarity; // GPIO polarity for VR1 HOT event + uint8_t GthrGpio; // GPIO pin configured for GTHR Event + uint8_t GthrPolarity; // replace GPIO polarity for GTHR + + // LED Display Settings + uint8_t LedPin0; // GPIO number for LedPin[0] + uint8_t LedPin1; // GPIO number for LedPin[1] + uint8_t LedPin2; // GPIO number for LedPin[2] + uint8_t LedEnableMask; + + uint8_t LedPcie; // GPIO number for PCIE results + uint8_t LedError; // GPIO number for Error Cases + uint8_t LedSpare1[2]; + + // SECTION: Clock Spread Spectrum + + // GFXCLK PLL Spread Spectrum + uint8_t PllGfxclkSpreadEnabled; // on or off + uint8_t PllGfxclkSpreadPercent; // Q4.4 + uint16_t PllGfxclkSpreadFreq; // kHz + + // GFXCLK DFLL Spread Spectrum + uint8_t DfllGfxclkSpreadEnabled; // on or off + uint8_t DfllGfxclkSpreadPercent; // Q4.4 + uint16_t DfllGfxclkSpreadFreq; // kHz + + // UCLK Spread Spectrum + uint16_t UclkSpreadPadding; + uint16_t UclkSpreadFreq; // kHz + + // FCLK Spread Spectrum + uint8_t FclkSpreadEnabled; // on or off + uint8_t FclkSpreadPercent; // Q4.4 + uint16_t FclkSpreadFreq; // kHz + + // Section: Memory Config + uint32_t MemoryChannelEnabled; // For DRAM use only, Max 32 channels enabled bit mask. + + uint8_t DramBitWidth; // For DRAM use only. See Dram Bit width type defines + uint8_t PaddingMem1[3]; + + // Section: Total Board Power + uint16_t TotalBoardPower; //Only needed for TCP Estimated case, where TCP = TGP+Total Board Power + uint16_t BoardPowerPadding; + + // SECTION: XGMI Training + uint8_t XgmiLinkSpeed [NUM_XGMI_PSTATE_LEVELS]; + uint8_t XgmiLinkWidth [NUM_XGMI_PSTATE_LEVELS]; + + uint16_t XgmiFclkFreq [NUM_XGMI_PSTATE_LEVELS]; + uint16_t XgmiSocVoltage [NUM_XGMI_PSTATE_LEVELS]; + + // SECTION: UMC feature flags + uint8_t HsrEnabled; + uint8_t VddqOffEnabled; + uint8_t PaddingUmcFlags[2]; + + // UCLK Spread Spectrum + uint8_t UclkSpreadPercent[16]; + + // SECTION: Board Reserved + uint32_t BoardReserved[11]; + + // SECTION: Structure Padding + + // Padding for MMHUB - do not modify this + uint32_t MmHubPadding[8]; // SMU internal use + + +} PPTable_beige_goby_t; + +typedef struct { + // Time constant parameters for clock averages in ms + uint16_t GfxclkAverageLpfTau; + uint16_t FclkAverageLpfTau; + uint16_t UclkAverageLpfTau; + uint16_t GfxActivityLpfTau; + uint16_t UclkActivityLpfTau; + uint16_t SocketPowerLpfTau; + uint16_t VcnClkAverageLpfTau; + uint16_t padding16; +} DriverSmuConfig_t; + +typedef struct { + DriverSmuConfig_t DriverSmuConfig; + + uint32_t Spare[7]; + // Padding - ignore + uint32_t MmHubPadding[8]; // SMU internal use +} DriverSmuConfigExternal_t; + +typedef struct { + uint16_t GfxclkFmin; // MHz + uint16_t GfxclkFmax; // MHz + QuadraticInt_t CustomGfxVfCurve; // a: mV/MHz^2, b: mv/MHz, c: mV + uint16_t CustomCurveFmin; // MHz + uint16_t UclkFmin; // MHz + uint16_t UclkFmax; // MHz + int16_t OverDrivePct; // % + uint16_t FanMaximumRpm; + uint16_t FanMinimumPwm; + uint16_t FanAcousticLimitRpm; + uint16_t FanTargetTemperature; // Degree Celcius + uint8_t FanLinearPwmPoints[NUM_OD_FAN_MAX_POINTS]; + uint8_t FanLinearTempPoints[NUM_OD_FAN_MAX_POINTS]; + uint16_t MaxOpTemp; // Degree Celcius + int16_t VddGfxOffset; // in mV + uint8_t FanZeroRpmEnable; + uint8_t FanZeroRpmStopTemp; + uint8_t FanMode; + uint8_t Padding[1]; +} OverDriveTable_t; + +typedef struct { + OverDriveTable_t OverDriveTable; + uint32_t Spare[8]; + + uint32_t MmHubPadding[8]; // SMU internal use +} OverDriveTableExternal_t; + +typedef struct { + uint32_t CurrClock[PPCLK_COUNT]; + + uint16_t AverageGfxclkFrequencyPreDs; + uint16_t AverageGfxclkFrequencyPostDs; + uint16_t AverageFclkFrequencyPreDs; + uint16_t AverageFclkFrequencyPostDs; + uint16_t AverageUclkFrequencyPreDs ; + uint16_t AverageUclkFrequencyPostDs ; + + + uint16_t AverageGfxActivity ; + uint16_t AverageUclkActivity ; + uint8_t CurrSocVoltageOffset ; + uint8_t CurrGfxVoltageOffset ; + uint8_t CurrMemVidOffset ; + uint8_t Padding8 ; + uint16_t AverageSocketPower ; + uint16_t TemperatureEdge ; + uint16_t TemperatureHotspot ; + uint16_t TemperatureMem ; + uint16_t TemperatureVrGfx ; + uint16_t TemperatureVrMem0 ; + uint16_t TemperatureVrMem1 ; + uint16_t TemperatureVrSoc ; + uint16_t TemperatureLiquid0 ; + uint16_t TemperatureLiquid1 ; + uint16_t TemperaturePlx ; + uint16_t Padding16 ; + uint32_t ThrottlerStatus ; + + uint8_t LinkDpmLevel; + uint8_t CurrFanPwm; + uint16_t CurrFanSpeed; + + //BACO metrics, PMFW-1721 + //metrics for D3hot entry/exit and driver ARM msgs + uint8_t D3HotEntryCountPerMode[D3HOT_SEQUENCE_COUNT]; + uint8_t D3HotExitCountPerMode[D3HOT_SEQUENCE_COUNT]; + uint8_t ArmMsgReceivedCountPerMode[D3HOT_SEQUENCE_COUNT]; + + //PMFW-4362 + uint32_t EnergyAccumulator; + uint16_t AverageVclk0Frequency ; + uint16_t AverageDclk0Frequency ; + uint16_t AverageVclk1Frequency ; + uint16_t AverageDclk1Frequency ; + uint16_t VcnActivityPercentage ; //place holder, David N. to provide full sequence + uint8_t PcieRate ; + uint8_t PcieWidth ; + uint16_t AverageGfxclkFrequencyTarget; + uint16_t Padding16_2; + +} SmuMetrics_t; + +typedef struct { + uint32_t CurrClock[PPCLK_COUNT]; + + uint16_t AverageGfxclkFrequencyPreDs; + uint16_t AverageGfxclkFrequencyPostDs; + uint16_t AverageFclkFrequencyPreDs; + uint16_t AverageFclkFrequencyPostDs; + uint16_t AverageUclkFrequencyPreDs ; + uint16_t AverageUclkFrequencyPostDs ; + + + uint16_t AverageGfxActivity ; + uint16_t AverageUclkActivity ; + uint8_t CurrSocVoltageOffset ; + uint8_t CurrGfxVoltageOffset ; + uint8_t CurrMemVidOffset ; + uint8_t Padding8 ; + uint16_t AverageSocketPower ; + uint16_t TemperatureEdge ; + uint16_t TemperatureHotspot ; + uint16_t TemperatureMem ; + uint16_t TemperatureVrGfx ; + uint16_t TemperatureVrMem0 ; + uint16_t TemperatureVrMem1 ; + uint16_t TemperatureVrSoc ; + uint16_t TemperatureLiquid0 ; + uint16_t TemperatureLiquid1 ; + uint16_t TemperaturePlx ; + uint16_t Padding16 ; + uint32_t AccCnt ; + uint8_t ThrottlingPercentage[THROTTLER_COUNT]; + + + uint8_t LinkDpmLevel; + uint8_t CurrFanPwm; + uint16_t CurrFanSpeed; + + //BACO metrics, PMFW-1721 + //metrics for D3hot entry/exit and driver ARM msgs + uint8_t D3HotEntryCountPerMode[D3HOT_SEQUENCE_COUNT]; + uint8_t D3HotExitCountPerMode[D3HOT_SEQUENCE_COUNT]; + uint8_t ArmMsgReceivedCountPerMode[D3HOT_SEQUENCE_COUNT]; + + //PMFW-4362 + uint32_t EnergyAccumulator; + uint16_t AverageVclk0Frequency ; + uint16_t AverageDclk0Frequency ; + uint16_t AverageVclk1Frequency ; + uint16_t AverageDclk1Frequency ; + uint16_t VcnActivityPercentage ; //place holder, David N. to provide full sequence + uint8_t PcieRate ; + uint8_t PcieWidth ; + uint16_t AverageGfxclkFrequencyTarget; + uint16_t Padding16_2; + +} SmuMetrics_V2_t; + +typedef struct { + union { + SmuMetrics_t SmuMetrics; + SmuMetrics_V2_t SmuMetrics_V2; + }; + uint32_t Spare[1]; + + // Padding - ignore + uint32_t MmHubPadding[8]; // SMU internal use +} SmuMetricsExternal_t; + +typedef struct { + uint16_t MinClock; // This is either DCEFCLK or SOCCLK (in MHz) + uint16_t MaxClock; // This is either DCEFCLK or SOCCLK (in MHz) + uint16_t MinUclk; + uint16_t MaxUclk; + + uint8_t WmSetting; + uint8_t Flags; + uint8_t Padding[2]; + +} WatermarkRowGeneric_t; + +#define NUM_WM_RANGES 4 + +typedef enum { + WM_SOCCLK = 0, + WM_DCEFCLK, + WM_COUNT, +} WM_CLOCK_e; + +typedef enum { + WATERMARKS_CLOCK_RANGE = 0, + WATERMARKS_DUMMY_PSTATE, + WATERMARKS_MALL, + WATERMARKS_COUNT, +} WATERMARKS_FLAGS_e; + +typedef struct { + // Watermarks + WatermarkRowGeneric_t WatermarkRow[WM_COUNT][NUM_WM_RANGES]; +} Watermarks_t; + +typedef struct { + Watermarks_t Watermarks; + + uint32_t MmHubPadding[8]; // SMU internal use +} WatermarksExternal_t; + +typedef struct { + uint16_t avgPsmCount[67]; + uint16_t minPsmCount[67]; + float avgPsmVoltage[67]; + float minPsmVoltage[67]; +} AvfsDebugTable_t; + +typedef struct { + AvfsDebugTable_t AvfsDebugTable; + + uint32_t MmHubPadding[8]; // SMU internal use +} AvfsDebugTableExternal_t; + +typedef struct { + uint8_t AvfsVersion; + uint8_t Padding; + + uint8_t AvfsEn[AVFS_VOLTAGE_COUNT]; + + uint8_t OverrideVFT[AVFS_VOLTAGE_COUNT]; + uint8_t OverrideAvfsGb[AVFS_VOLTAGE_COUNT]; + + uint8_t OverrideTemperatures[AVFS_VOLTAGE_COUNT]; + uint8_t OverrideVInversion[AVFS_VOLTAGE_COUNT]; + uint8_t OverrideP2V[AVFS_VOLTAGE_COUNT]; + uint8_t OverrideP2VCharzFreq[AVFS_VOLTAGE_COUNT]; + + int32_t VFT0_m1[AVFS_VOLTAGE_COUNT]; // Q8.24 + int32_t VFT0_m2[AVFS_VOLTAGE_COUNT]; // Q12.12 + int32_t VFT0_b[AVFS_VOLTAGE_COUNT]; // Q32 + + int32_t VFT1_m1[AVFS_VOLTAGE_COUNT]; // Q8.16 + int32_t VFT1_m2[AVFS_VOLTAGE_COUNT]; // Q12.12 + int32_t VFT1_b[AVFS_VOLTAGE_COUNT]; // Q32 + + int32_t VFT2_m1[AVFS_VOLTAGE_COUNT]; // Q8.16 + int32_t VFT2_m2[AVFS_VOLTAGE_COUNT]; // Q12.12 + int32_t VFT2_b[AVFS_VOLTAGE_COUNT]; // Q32 + + int32_t AvfsGb0_m1[AVFS_VOLTAGE_COUNT]; // Q8.24 + int32_t AvfsGb0_m2[AVFS_VOLTAGE_COUNT]; // Q12.12 + int32_t AvfsGb0_b[AVFS_VOLTAGE_COUNT]; // Q32 + + int32_t AcBtcGb_m1[AVFS_VOLTAGE_COUNT]; // Q8.24 + int32_t AcBtcGb_m2[AVFS_VOLTAGE_COUNT]; // Q12.12 + int32_t AcBtcGb_b[AVFS_VOLTAGE_COUNT]; // Q32 + + uint32_t AvfsTempCold[AVFS_VOLTAGE_COUNT]; + uint32_t AvfsTempMid[AVFS_VOLTAGE_COUNT]; + uint32_t AvfsTempHot[AVFS_VOLTAGE_COUNT]; + + uint32_t VInversion[AVFS_VOLTAGE_COUNT]; // in mV with 2 fractional bits + + + int32_t P2V_m1[AVFS_VOLTAGE_COUNT]; // Q8.24 + int32_t P2V_m2[AVFS_VOLTAGE_COUNT]; // Q12.12 + int32_t P2V_b[AVFS_VOLTAGE_COUNT]; // Q32 + + uint32_t P2VCharzFreq[AVFS_VOLTAGE_COUNT]; // in 10KHz units + + uint32_t EnabledAvfsModules[3]; //Sienna_Cichlid - 67 AVFS modules +} AvfsFuseOverride_t; + +typedef struct { + AvfsFuseOverride_t AvfsFuseOverride; + + uint32_t MmHubPadding[8]; // SMU internal use +} AvfsFuseOverrideExternal_t; + +typedef struct { + uint8_t Gfx_ActiveHystLimit; + uint8_t Gfx_IdleHystLimit; + uint8_t Gfx_FPS; + uint8_t Gfx_MinActiveFreqType; + uint8_t Gfx_BoosterFreqType; + uint8_t Gfx_MinFreqStep; // Minimum delta between current and target frequeny in order for FW to change clock. + uint16_t Gfx_MinActiveFreq; // MHz + uint16_t Gfx_BoosterFreq; // MHz + uint16_t Gfx_PD_Data_time_constant; // Time constant of PD controller in ms + uint32_t Gfx_PD_Data_limit_a; // Q16 + uint32_t Gfx_PD_Data_limit_b; // Q16 + uint32_t Gfx_PD_Data_limit_c; // Q16 + uint32_t Gfx_PD_Data_error_coeff; // Q16 + uint32_t Gfx_PD_Data_error_rate_coeff; // Q16 + + uint8_t Fclk_ActiveHystLimit; + uint8_t Fclk_IdleHystLimit; + uint8_t Fclk_FPS; + uint8_t Fclk_MinActiveFreqType; + uint8_t Fclk_BoosterFreqType; + uint8_t Fclk_MinFreqStep; // Minimum delta between current and target frequeny in order for FW to change clock. + uint16_t Fclk_MinActiveFreq; // MHz + uint16_t Fclk_BoosterFreq; // MHz + uint16_t Fclk_PD_Data_time_constant; // Time constant of PD controller in ms + uint32_t Fclk_PD_Data_limit_a; // Q16 + uint32_t Fclk_PD_Data_limit_b; // Q16 + uint32_t Fclk_PD_Data_limit_c; // Q16 + uint32_t Fclk_PD_Data_error_coeff; // Q16 + uint32_t Fclk_PD_Data_error_rate_coeff; // Q16 + + uint8_t Mem_ActiveHystLimit; + uint8_t Mem_IdleHystLimit; + uint8_t Mem_FPS; + uint8_t Mem_MinActiveFreqType; + uint8_t Mem_BoosterFreqType; + uint8_t Mem_MinFreqStep; // Minimum delta between current and target frequeny in order for FW to change clock. + uint16_t Mem_MinActiveFreq; // MHz + uint16_t Mem_BoosterFreq; // MHz + uint16_t Mem_PD_Data_time_constant; // Time constant of PD controller in ms + uint32_t Mem_PD_Data_limit_a; // Q16 + uint32_t Mem_PD_Data_limit_b; // Q16 + uint32_t Mem_PD_Data_limit_c; // Q16 + uint32_t Mem_PD_Data_error_coeff; // Q16 + uint32_t Mem_PD_Data_error_rate_coeff; // Q16 + + uint32_t Mem_UpThreshold_Limit; // Q16 + uint8_t Mem_UpHystLimit; + uint8_t Mem_DownHystLimit; + uint16_t Mem_Fps; + +} DpmActivityMonitorCoeffInt_t; + + +typedef struct { + DpmActivityMonitorCoeffInt_t DpmActivityMonitorCoeffInt; + uint32_t MmHubPadding[8]; // SMU internal use +} DpmActivityMonitorCoeffIntExternal_t; + +// Workload bits +#define WORKLOAD_PPLIB_DEFAULT_BIT 0 +#define WORKLOAD_PPLIB_FULL_SCREEN_3D_BIT 1 +#define WORKLOAD_PPLIB_POWER_SAVING_BIT 2 +#define WORKLOAD_PPLIB_VIDEO_BIT 3 +#define WORKLOAD_PPLIB_VR_BIT 4 +#define WORKLOAD_PPLIB_COMPUTE_BIT 5 +#define WORKLOAD_PPLIB_CUSTOM_BIT 6 +#define WORKLOAD_PPLIB_W3D_BIT 7 +#define WORKLOAD_PPLIB_COUNT 8 + + +// These defines are used with the following messages: +// SMC_MSG_TransferTableDram2Smu +// SMC_MSG_TransferTableSmu2Dram + +// Table transfer status +#define TABLE_TRANSFER_OK 0x0 +#define TABLE_TRANSFER_FAILED 0xFF + +// Table types +#define TABLE_PPTABLE 0 +#define TABLE_WATERMARKS 1 +#define TABLE_AVFS_PSM_DEBUG 2 +#define TABLE_AVFS_FUSE_OVERRIDE 3 +#define TABLE_PMSTATUSLOG 4 +#define TABLE_SMU_METRICS 5 +#define TABLE_DRIVER_SMU_CONFIG 6 +#define TABLE_ACTIVITY_MONITOR_COEFF 7 +#define TABLE_OVERDRIVE 8 +#define TABLE_I2C_COMMANDS 9 +#define TABLE_PACE 10 +#define TABLE_COUNT 11 + +typedef struct { + float FlopsPerByteTable[RLC_PACE_TABLE_NUM_LEVELS]; +} RlcPaceFlopsPerByteOverride_t; + +typedef struct { + RlcPaceFlopsPerByteOverride_t RlcPaceFlopsPerByteOverride; + + uint32_t MmHubPadding[8]; // SMU internal use +} RlcPaceFlopsPerByteOverrideExternal_t; + +// These defines are used with the SMC_MSG_SetUclkFastSwitch message. +#define UCLK_SWITCH_SLOW 0 +#define UCLK_SWITCH_FAST 1 +#define UCLK_SWITCH_DUMMY 2 +#endif |