diff options
Diffstat (limited to 'drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu14_driver_if_v14_0.h')
| -rw-r--r-- | drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu14_driver_if_v14_0.h | 1836 |
1 files changed, 1836 insertions, 0 deletions
diff --git a/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu14_driver_if_v14_0.h b/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu14_driver_if_v14_0.h new file mode 100644 index 000000000000..97a29b80fb13 --- /dev/null +++ b/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu14_driver_if_v14_0.h @@ -0,0 +1,1836 @@ +/* + * Copyright 2023 Advanced Micro Devices, Inc. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + */ + +#ifndef SMU14_DRIVER_IF_V14_0_H +#define SMU14_DRIVER_IF_V14_0_H + +//Increment this version if SkuTable_t or BoardTable_t change +#define PPTABLE_VERSION 0x18 + +#define NUM_GFXCLK_DPM_LEVELS 16 +#define NUM_SOCCLK_DPM_LEVELS 8 +#define NUM_MP0CLK_DPM_LEVELS 2 +#define NUM_DCLK_DPM_LEVELS 8 +#define NUM_VCLK_DPM_LEVELS 8 +#define NUM_DISPCLK_DPM_LEVELS 8 +#define NUM_DPPCLK_DPM_LEVELS 8 +#define NUM_DPREFCLK_DPM_LEVELS 8 +#define NUM_DCFCLK_DPM_LEVELS 8 +#define NUM_DTBCLK_DPM_LEVELS 8 +#define NUM_UCLK_DPM_LEVELS 6 +#define NUM_LINK_LEVELS 3 +#define NUM_FCLK_DPM_LEVELS 8 +#define NUM_OD_FAN_MAX_POINTS 6 + +// Feature Control Defines +#define FEATURE_FW_DATA_READ_BIT 0 +#define FEATURE_DPM_GFXCLK_BIT 1 +#define FEATURE_DPM_GFX_POWER_OPTIMIZER_BIT 2 +#define FEATURE_DPM_UCLK_BIT 3 +#define FEATURE_DPM_FCLK_BIT 4 +#define FEATURE_DPM_SOCCLK_BIT 5 +#define FEATURE_DPM_LINK_BIT 6 +#define FEATURE_DPM_DCN_BIT 7 +#define FEATURE_VMEMP_SCALING_BIT 8 +#define FEATURE_VDDIO_MEM_SCALING_BIT 9 +#define FEATURE_DS_GFXCLK_BIT 10 +#define FEATURE_DS_SOCCLK_BIT 11 +#define FEATURE_DS_FCLK_BIT 12 +#define FEATURE_DS_LCLK_BIT 13 +#define FEATURE_DS_DCFCLK_BIT 14 +#define FEATURE_DS_UCLK_BIT 15 +#define FEATURE_GFX_ULV_BIT 16 +#define FEATURE_FW_DSTATE_BIT 17 +#define FEATURE_GFXOFF_BIT 18 +#define FEATURE_BACO_BIT 19 +#define FEATURE_MM_DPM_BIT 20 +#define FEATURE_SOC_MPCLK_DS_BIT 21 +#define FEATURE_BACO_MPCLK_DS_BIT 22 +#define FEATURE_THROTTLERS_BIT 23 +#define FEATURE_SMARTSHIFT_BIT 24 +#define FEATURE_GTHR_BIT 25 +#define FEATURE_ACDC_BIT 26 +#define FEATURE_VR0HOT_BIT 27 +#define FEATURE_FW_CTF_BIT 28 +#define FEATURE_FAN_CONTROL_BIT 29 +#define FEATURE_GFX_DCS_BIT 30 +#define FEATURE_GFX_READ_MARGIN_BIT 31 +#define FEATURE_LED_DISPLAY_BIT 32 +#define FEATURE_GFXCLK_SPREAD_SPECTRUM_BIT 33 +#define FEATURE_OUT_OF_BAND_MONITOR_BIT 34 +#define FEATURE_OPTIMIZED_VMIN_BIT 35 +#define FEATURE_GFX_IMU_BIT 36 +#define FEATURE_BOOT_TIME_CAL_BIT 37 +#define FEATURE_GFX_PCC_DFLL_BIT 38 +#define FEATURE_SOC_CG_BIT 39 +#define FEATURE_DF_CSTATE_BIT 40 +#define FEATURE_GFX_EDC_BIT 41 +#define FEATURE_BOOT_POWER_OPT_BIT 42 +#define FEATURE_CLOCK_POWER_DOWN_BYPASS_BIT 43 +#define FEATURE_DS_VCN_BIT 44 +#define FEATURE_BACO_CG_BIT 45 +#define FEATURE_MEM_TEMP_READ_BIT 46 +#define FEATURE_ATHUB_MMHUB_PG_BIT 47 +#define FEATURE_SOC_PCC_BIT 48 +#define FEATURE_EDC_PWRBRK_BIT 49 +#define FEATURE_SOC_EDC_XVMIN_BIT 50 +#define FEATURE_GFX_PSM_DIDT_BIT 51 +#define FEATURE_APT_ALL_ENABLE_BIT 52 +#define FEATURE_APT_SQ_THROTTLE_BIT 53 +#define FEATURE_APT_PF_DCS_BIT 54 +#define FEATURE_GFX_EDC_XVMIN_BIT 55 +#define FEATURE_GFX_DIDT_XVMIN_BIT 56 +#define FEATURE_FAN_ABNORMAL_BIT 57 +#define FEATURE_CLOCK_STRETCH_COMPENSATOR 58 +#define FEATURE_SPARE_59_BIT 59 +#define FEATURE_SPARE_60_BIT 60 +#define FEATURE_SPARE_61_BIT 61 +#define FEATURE_SPARE_62_BIT 62 +#define FEATURE_SPARE_63_BIT 63 +#define NUM_FEATURES 64 + +#define ALLOWED_FEATURE_CTRL_DEFAULT 0xFFFFFFFFFFFFFFFFULL +#define ALLOWED_FEATURE_CTRL_SCPM (1 << FEATURE_DPM_GFXCLK_BIT) | \ + (1 << FEATURE_DPM_GFX_POWER_OPTIMIZER_BIT) | \ + (1 << FEATURE_DPM_UCLK_BIT) | \ + (1 << FEATURE_DPM_FCLK_BIT) | \ + (1 << FEATURE_DPM_SOCCLK_BIT) | \ + (1 << FEATURE_DPM_LINK_BIT) | \ + (1 << FEATURE_DPM_DCN_BIT) | \ + (1 << FEATURE_DS_GFXCLK_BIT) | \ + (1 << FEATURE_DS_SOCCLK_BIT) | \ + (1 << FEATURE_DS_FCLK_BIT) | \ + (1 << FEATURE_DS_LCLK_BIT) | \ + (1 << FEATURE_DS_DCFCLK_BIT) | \ + (1 << FEATURE_DS_UCLK_BIT) | \ + (1ULL << FEATURE_DS_VCN_BIT) + + +//For use with feature control messages +typedef enum { + FEATURE_PWR_ALL, + FEATURE_PWR_S5, + FEATURE_PWR_BACO, + FEATURE_PWR_SOC, + FEATURE_PWR_GFX, + FEATURE_PWR_DOMAIN_COUNT, +} FEATURE_PWR_DOMAIN_e; + +//For use with feature control + BTC save restore +typedef enum { + FEATURE_BTC_NOP, + FEATURE_BTC_SAVE, + FEATURE_BTC_RESTORE, + FEATURE_BTC_COUNT, +} FEATURE_BTC_e; + +// Debug Overrides Bitmask +#define DEBUG_OVERRIDE_DISABLE_VOLT_LINK_VCN_FCLK 0x00000001 +#define DEBUG_OVERRIDE_DISABLE_VOLT_LINK_DCN_FCLK 0x00000002 +#define DEBUG_OVERRIDE_DISABLE_VOLT_LINK_MP0_FCLK 0x00000004 +#define DEBUG_OVERRIDE_DISABLE_VOLT_LINK_VCN_DCFCLK 0x00000008 +#define DEBUG_OVERRIDE_DISABLE_FAST_FCLK_TIMER 0x00000010 +#define DEBUG_OVERRIDE_DISABLE_VCN_PG 0x00000020 +#define DEBUG_OVERRIDE_DISABLE_FMAX_VMAX 0x00000040 +#define DEBUG_OVERRIDE_DISABLE_IMU_FW_CHECKS 0x00000080 +#define DEBUG_OVERRIDE_DISABLE_D0i2_REENTRY_HSR_TIMER_CHECK 0x00000100 +#define DEBUG_OVERRIDE_DISABLE_DFLL 0x00000200 +#define DEBUG_OVERRIDE_ENABLE_RLC_VF_BRINGUP_MODE 0x00000400 +#define DEBUG_OVERRIDE_DFLL_MASTER_MODE 0x00000800 +#define DEBUG_OVERRIDE_ENABLE_PROFILING_MODE 0x00001000 +#define DEBUG_OVERRIDE_ENABLE_SOC_VF_BRINGUP_MODE 0x00002000 +#define DEBUG_OVERRIDE_ENABLE_PER_WGP_RESIENCY 0x00004000 +#define DEBUG_OVERRIDE_DISABLE_MEMORY_VOLTAGE_SCALING 0x00008000 + +// VR Mapping Bit Defines +#define VR_MAPPING_VR_SELECT_MASK 0x01 +#define VR_MAPPING_VR_SELECT_SHIFT 0x00 + +#define VR_MAPPING_PLANE_SELECT_MASK 0x02 +#define VR_MAPPING_PLANE_SELECT_SHIFT 0x01 + +// PSI Bit Defines +#define PSI_SEL_VR0_PLANE0_PSI0 0x01 +#define PSI_SEL_VR0_PLANE0_PSI1 0x02 +#define PSI_SEL_VR0_PLANE1_PSI0 0x04 +#define PSI_SEL_VR0_PLANE1_PSI1 0x08 +#define PSI_SEL_VR1_PLANE0_PSI0 0x10 +#define PSI_SEL_VR1_PLANE0_PSI1 0x20 +#define PSI_SEL_VR1_PLANE1_PSI0 0x40 +#define PSI_SEL_VR1_PLANE1_PSI1 0x80 + +typedef enum { + SVI_PSI_0, // Full phase count (default) + SVI_PSI_1, // Phase count 1st level + SVI_PSI_2, // Phase count 2nd level + SVI_PSI_3, // Single phase operation + active diode emulation + SVI_PSI_4, // Single phase operation + passive diode emulation *optional* + SVI_PSI_5, // Reserved + SVI_PSI_6, // Power down to 0V (voltage regulation disabled) + SVI_PSI_7, // Automated phase shedding and diode emulation +} SVI_PSI_e; + +// Throttler Control/Status Bits +#define THROTTLER_TEMP_EDGE_BIT 0 +#define THROTTLER_TEMP_HOTSPOT_BIT 1 +#define THROTTLER_TEMP_HOTSPOT_GFX_BIT 2 +#define THROTTLER_TEMP_HOTSPOT_SOC_BIT 3 +#define THROTTLER_TEMP_MEM_BIT 4 +#define THROTTLER_TEMP_VR_GFX_BIT 5 +#define THROTTLER_TEMP_VR_SOC_BIT 6 +#define THROTTLER_TEMP_VR_MEM0_BIT 7 +#define THROTTLER_TEMP_VR_MEM1_BIT 8 +#define THROTTLER_TEMP_LIQUID0_BIT 9 +#define THROTTLER_TEMP_LIQUID1_BIT 10 +#define THROTTLER_TEMP_PLX_BIT 11 +#define THROTTLER_TDC_GFX_BIT 12 +#define THROTTLER_TDC_SOC_BIT 13 +#define THROTTLER_PPT0_BIT 14 +#define THROTTLER_PPT1_BIT 15 +#define THROTTLER_PPT2_BIT 16 +#define THROTTLER_PPT3_BIT 17 +#define THROTTLER_FIT_BIT 18 +#define THROTTLER_GFX_APCC_PLUS_BIT 19 +#define THROTTLER_GFX_DVO_BIT 20 +#define THROTTLER_COUNT 21 + +// FW DState Features Control Bits +#define FW_DSTATE_SOC_ULV_BIT 0 +#define FW_DSTATE_G6_HSR_BIT 1 +#define FW_DSTATE_G6_PHY_VMEMP_OFF_BIT 2 +#define FW_DSTATE_SMN_DS_BIT 3 +#define FW_DSTATE_MP1_WHISPER_MODE_BIT 4 +#define FW_DSTATE_SOC_LIV_MIN_BIT 5 +#define FW_DSTATE_SOC_PLL_PWRDN_BIT 6 +#define FW_DSTATE_MEM_PLL_PWRDN_BIT 7 +#define FW_DSTATE_MALL_ALLOC_BIT 8 +#define FW_DSTATE_MEM_PSI_BIT 9 +#define FW_DSTATE_HSR_NON_STROBE_BIT 10 +#define FW_DSTATE_MP0_ENTER_WFI_BIT 11 +#define FW_DSTATE_MALL_FLUSH_BIT 12 +#define FW_DSTATE_SOC_PSI_BIT 13 +#define FW_DSTATE_MMHUB_INTERLOCK_BIT 14 +#define FW_DSTATE_D0i3_2_QUIET_FW_BIT 15 +#define FW_DSTATE_CLDO_PRG_BIT 16 +#define FW_DSTATE_DF_PLL_PWRDN_BIT 17 + +//LED Display Mask & Control Bits +#define LED_DISPLAY_GFX_DPM_BIT 0 +#define LED_DISPLAY_PCIE_BIT 1 +#define LED_DISPLAY_ERROR_BIT 2 + + +#define MEM_TEMP_READ_OUT_OF_BAND_BIT 0 +#define MEM_TEMP_READ_IN_BAND_REFRESH_BIT 1 +#define MEM_TEMP_READ_IN_BAND_DUMMY_PSTATE_BIT 2 + +typedef enum { + SMARTSHIFT_VERSION_1, + SMARTSHIFT_VERSION_2, + SMARTSHIFT_VERSION_3, +} SMARTSHIFT_VERSION_e; + +typedef enum { + FOPT_CALC_AC_CALC_DC, + FOPT_PPTABLE_AC_CALC_DC, + FOPT_CALC_AC_PPTABLE_DC, + FOPT_PPTABLE_AC_PPTABLE_DC, +} FOPT_CALC_e; + +typedef enum { + DRAM_BIT_WIDTH_DISABLED = 0, + DRAM_BIT_WIDTH_X_8 = 8, + DRAM_BIT_WIDTH_X_16 = 16, + DRAM_BIT_WIDTH_X_32 = 32, + DRAM_BIT_WIDTH_X_64 = 64, + DRAM_BIT_WIDTH_X_128 = 128, + DRAM_BIT_WIDTH_COUNT, +} DRAM_BIT_WIDTH_TYPE_e; + +//I2C Interface +#define NUM_I2C_CONTROLLERS 8 + +#define I2C_CONTROLLER_ENABLED 1 +#define I2C_CONTROLLER_DISABLED 0 + +#define MAX_SW_I2C_COMMANDS 24 + +typedef enum { + I2C_CONTROLLER_PORT_0 = 0, //CKSVII2C0 + I2C_CONTROLLER_PORT_1 = 1, //CKSVII2C1 + I2C_CONTROLLER_PORT_COUNT, +} I2cControllerPort_e; + +typedef enum { + I2C_CONTROLLER_NAME_VR_GFX = 0, + I2C_CONTROLLER_NAME_VR_SOC, + I2C_CONTROLLER_NAME_VR_VMEMP, + I2C_CONTROLLER_NAME_VR_VDDIO, + I2C_CONTROLLER_NAME_LIQUID0, + I2C_CONTROLLER_NAME_LIQUID1, + I2C_CONTROLLER_NAME_PLX, + I2C_CONTROLLER_NAME_FAN_INTAKE, + I2C_CONTROLLER_NAME_COUNT, +} I2cControllerName_e; + +typedef enum { + I2C_CONTROLLER_THROTTLER_TYPE_NONE = 0, + I2C_CONTROLLER_THROTTLER_VR_GFX, + I2C_CONTROLLER_THROTTLER_VR_SOC, + I2C_CONTROLLER_THROTTLER_VR_VMEMP, + I2C_CONTROLLER_THROTTLER_VR_VDDIO, + I2C_CONTROLLER_THROTTLER_LIQUID0, + I2C_CONTROLLER_THROTTLER_LIQUID1, + I2C_CONTROLLER_THROTTLER_PLX, + I2C_CONTROLLER_THROTTLER_FAN_INTAKE, + I2C_CONTROLLER_THROTTLER_INA3221, + I2C_CONTROLLER_THROTTLER_COUNT, +} I2cControllerThrottler_e; + +typedef enum { + I2C_CONTROLLER_PROTOCOL_VR_XPDE132G5, + I2C_CONTROLLER_PROTOCOL_VR_IR35217, + I2C_CONTROLLER_PROTOCOL_TMP_MAX31875, + I2C_CONTROLLER_PROTOCOL_INA3221, + I2C_CONTROLLER_PROTOCOL_TMP_MAX6604, + I2C_CONTROLLER_PROTOCOL_COUNT, +} I2cControllerProtocol_e; + +typedef struct { + uint8_t Enabled; + uint8_t Speed; + uint8_t SlaveAddress; + uint8_t ControllerPort; + uint8_t ControllerName; + uint8_t ThermalThrotter; + uint8_t I2cProtocol; + uint8_t PaddingConfig; +} I2cControllerConfig_t; + +typedef enum { + I2C_PORT_SVD_SCL = 0, + I2C_PORT_GPIO, +} I2cPort_e; + +typedef enum { + I2C_SPEED_FAST_50K = 0, //50 Kbits/s + I2C_SPEED_FAST_100K, //100 Kbits/s + I2C_SPEED_FAST_400K, //400 Kbits/s + I2C_SPEED_FAST_PLUS_1M, //1 Mbits/s (in fast mode) + I2C_SPEED_HIGH_1M, //1 Mbits/s (in high speed mode) + I2C_SPEED_HIGH_2M, //2.3 Mbits/s + I2C_SPEED_COUNT, +} I2cSpeed_e; + +typedef enum { + I2C_CMD_READ = 0, + I2C_CMD_WRITE, + I2C_CMD_COUNT, +} I2cCmdType_e; + +#define CMDCONFIG_STOP_BIT 0 +#define CMDCONFIG_RESTART_BIT 1 +#define CMDCONFIG_READWRITE_BIT 2 //bit should be 0 for read, 1 for write + +#define CMDCONFIG_STOP_MASK (1 << CMDCONFIG_STOP_BIT) +#define CMDCONFIG_RESTART_MASK (1 << CMDCONFIG_RESTART_BIT) +#define CMDCONFIG_READWRITE_MASK (1 << CMDCONFIG_READWRITE_BIT) + +typedef struct { + uint8_t ReadWriteData; //Return data for read. Data to send for write + uint8_t CmdConfig; //Includes whether associated command should have a stop or restart command, and is a read or write +} SwI2cCmd_t; //SW I2C Command Table + +typedef struct { + uint8_t I2CcontrollerPort; //CKSVII2C0(0) or //CKSVII2C1(1) + uint8_t I2CSpeed; //Use I2cSpeed_e to indicate speed to select + uint8_t SlaveAddress; //Slave address of device + uint8_t NumCmds; //Number of commands + + SwI2cCmd_t SwI2cCmds[MAX_SW_I2C_COMMANDS]; +} SwI2cRequest_t; // SW I2C Request Table + +typedef struct { + SwI2cRequest_t SwI2cRequest; + + uint32_t Spare[8]; + uint32_t MmHubPadding[8]; // SMU internal use +} SwI2cRequestExternal_t; + +typedef struct { + uint64_t mca_umc_status; + uint64_t mca_umc_addr; + + uint16_t ce_count_lo_chip; + uint16_t ce_count_hi_chip; + + uint32_t eccPadding; +} EccInfo_t; + +typedef struct { + EccInfo_t EccInfo[24]; +} EccInfoTable_t; + +//D3HOT sequences +typedef enum { + BACO_SEQUENCE, + MSR_SEQUENCE, + BAMACO_SEQUENCE, + ULPS_SEQUENCE, + D3HOT_SEQUENCE_COUNT, +} D3HOTSequence_e; + +//This is aligned with RSMU PGFSM Register Mapping +typedef enum { + PG_DYNAMIC_MODE = 0, + PG_STATIC_MODE, +} PowerGatingMode_e; + +//This is aligned with RSMU PGFSM Register Mapping +typedef enum { + PG_POWER_DOWN = 0, + PG_POWER_UP, +} PowerGatingSettings_e; + +typedef struct { + uint32_t a; // store in IEEE float format in this variable + uint32_t b; // store in IEEE float format in this variable + uint32_t c; // store in IEEE float format in this variable +} QuadraticInt_t; + +typedef struct { + uint32_t m; // store in IEEE float format in this variable + uint32_t b; // store in IEEE float format in this variable +} LinearInt_t; + +typedef struct { + uint32_t a; // store in IEEE float format in this variable + uint32_t b; // store in IEEE float format in this variable + uint32_t c; // store in IEEE float format in this variable +} DroopInt_t; + +typedef enum { + DCS_ARCH_DISABLED, + DCS_ARCH_FADCS, + DCS_ARCH_ASYNC, +} DCS_ARCH_e; + +//Only Clks that have DPM descriptors are listed here +typedef enum { + PPCLK_GFXCLK = 0, + PPCLK_SOCCLK, + PPCLK_UCLK, + PPCLK_FCLK, + PPCLK_DCLK_0, + PPCLK_VCLK_0, + PPCLK_DISPCLK, + PPCLK_DPPCLK, + PPCLK_DPREFCLK, + PPCLK_DCFCLK, + PPCLK_DTBCLK, + PPCLK_COUNT, +} PPCLK_e; + +typedef enum { + VOLTAGE_MODE_PPTABLE = 0, + VOLTAGE_MODE_FUSES, + VOLTAGE_MODE_COUNT, +} VOLTAGE_MODE_e; + +typedef enum { + AVFS_VOLTAGE_GFX = 0, + AVFS_VOLTAGE_SOC, + AVFS_VOLTAGE_COUNT, +} AVFS_VOLTAGE_TYPE_e; + +typedef enum { + AVFS_TEMP_COLD = 0, + AVFS_TEMP_HOT, + AVFS_TEMP_COUNT, +} AVFS_TEMP_e; + +typedef enum { + AVFS_D_G, + AVFS_D_COUNT, +} AVFS_D_e; + + +typedef enum { + UCLK_DIV_BY_1 = 0, + UCLK_DIV_BY_2, + UCLK_DIV_BY_4, + UCLK_DIV_BY_8, +} UCLK_DIV_e; + +typedef enum { + GPIO_INT_POLARITY_ACTIVE_LOW = 0, + GPIO_INT_POLARITY_ACTIVE_HIGH, +} GpioIntPolarity_e; + +typedef enum { + PWR_CONFIG_TDP = 0, + PWR_CONFIG_TGP, + PWR_CONFIG_TCP_ESTIMATED, + PWR_CONFIG_TCP_MEASURED, + PWR_CONFIG_TBP_DESKTOP, + PWR_CONFIG_TBP_MOBILE, +} PwrConfig_e; + +typedef struct { + uint8_t Padding; + uint8_t SnapToDiscrete; // 0 - Fine grained DPM, 1 - Discrete DPM + uint8_t NumDiscreteLevels; // Set to 2 (Fmin, Fmax) when using fine grained DPM, otherwise set to # discrete levels used + uint8_t CalculateFopt; // Indication whether FW should calculate Fopt or use values below. Reference FOPT_CALC_e + LinearInt_t ConversionToAvfsClk; // Transfer function to AVFS Clock (GHz->GHz) + uint32_t Padding3[3]; + uint16_t Padding4; + uint16_t FoptimalDc; //Foptimal frequency in DC power mode. + uint16_t FoptimalAc; //Foptimal frequency in AC power mode. + uint16_t Padding2; +} DpmDescriptor_t; + +typedef enum { + PPT_THROTTLER_PPT0, + PPT_THROTTLER_PPT1, + PPT_THROTTLER_PPT2, + PPT_THROTTLER_PPT3, + PPT_THROTTLER_COUNT +} PPT_THROTTLER_e; + +typedef enum { + TEMP_EDGE, + TEMP_HOTSPOT, + TEMP_HOTSPOT_GFX, + TEMP_HOTSPOT_SOC, + TEMP_MEM, + TEMP_VR_GFX, + TEMP_VR_SOC, + TEMP_VR_MEM0, + TEMP_VR_MEM1, + TEMP_LIQUID0, + TEMP_LIQUID1, + TEMP_PLX, + TEMP_COUNT, +} TEMP_e; + +typedef enum { + TDC_THROTTLER_GFX, + TDC_THROTTLER_SOC, + TDC_THROTTLER_COUNT +} TDC_THROTTLER_e; + +typedef enum { + SVI_PLANE_VDD_GFX, + SVI_PLANE_VDD_SOC, + SVI_PLANE_VDDCI_MEM, + SVI_PLANE_VDDIO_MEM, + SVI_PLANE_COUNT, +} SVI_PLANE_e; + +typedef enum { + PMFW_VOLT_PLANE_GFX, + PMFW_VOLT_PLANE_SOC, + PMFW_VOLT_PLANE_COUNT +} PMFW_VOLT_PLANE_e; + +typedef enum { + CUSTOMER_VARIANT_ROW, + CUSTOMER_VARIANT_FALCON, + CUSTOMER_VARIANT_COUNT, +} CUSTOMER_VARIANT_e; + +typedef enum { + POWER_SOURCE_AC, + POWER_SOURCE_DC, + POWER_SOURCE_COUNT, +} POWER_SOURCE_e; + +typedef enum { + MEM_VENDOR_PLACEHOLDER0, // 0 + MEM_VENDOR_SAMSUNG, // 1 + MEM_VENDOR_INFINEON, // 2 + MEM_VENDOR_ELPIDA, // 3 + MEM_VENDOR_ETRON, // 4 + MEM_VENDOR_NANYA, // 5 + MEM_VENDOR_HYNIX, // 6 + MEM_VENDOR_MOSEL, // 7 + MEM_VENDOR_WINBOND, // 8 + MEM_VENDOR_ESMT, // 9 + MEM_VENDOR_PLACEHOLDER1, // 10 + MEM_VENDOR_PLACEHOLDER2, // 11 + MEM_VENDOR_PLACEHOLDER3, // 12 + MEM_VENDOR_PLACEHOLDER4, // 13 + MEM_VENDOR_PLACEHOLDER5, // 14 + MEM_VENDOR_MICRON, // 15 + MEM_VENDOR_COUNT, +} MEM_VENDOR_e; + +typedef enum { + PP_GRTAVFS_HW_CPO_CTL_ZONE0, + PP_GRTAVFS_HW_CPO_CTL_ZONE1, + PP_GRTAVFS_HW_CPO_CTL_ZONE2, + PP_GRTAVFS_HW_CPO_CTL_ZONE3, + PP_GRTAVFS_HW_CPO_CTL_ZONE4, + PP_GRTAVFS_HW_CPO_EN_0_31_ZONE0, + PP_GRTAVFS_HW_CPO_EN_32_63_ZONE0, + PP_GRTAVFS_HW_CPO_EN_0_31_ZONE1, + PP_GRTAVFS_HW_CPO_EN_32_63_ZONE1, + PP_GRTAVFS_HW_CPO_EN_0_31_ZONE2, + PP_GRTAVFS_HW_CPO_EN_32_63_ZONE2, + PP_GRTAVFS_HW_CPO_EN_0_31_ZONE3, + PP_GRTAVFS_HW_CPO_EN_32_63_ZONE3, + PP_GRTAVFS_HW_CPO_EN_0_31_ZONE4, + PP_GRTAVFS_HW_CPO_EN_32_63_ZONE4, + PP_GRTAVFS_HW_ZONE0_VF, + PP_GRTAVFS_HW_ZONE1_VF1, + PP_GRTAVFS_HW_ZONE2_VF2, + PP_GRTAVFS_HW_ZONE3_VF3, + PP_GRTAVFS_HW_VOLTAGE_GB, + PP_GRTAVFS_HW_CPOSCALINGCTRL_ZONE0, + PP_GRTAVFS_HW_CPOSCALINGCTRL_ZONE1, + PP_GRTAVFS_HW_CPOSCALINGCTRL_ZONE2, + PP_GRTAVFS_HW_CPOSCALINGCTRL_ZONE3, + PP_GRTAVFS_HW_CPOSCALINGCTRL_ZONE4, + PP_GRTAVFS_HW_RESERVED_0, + PP_GRTAVFS_HW_RESERVED_1, + PP_GRTAVFS_HW_RESERVED_2, + PP_GRTAVFS_HW_RESERVED_3, + PP_GRTAVFS_HW_RESERVED_4, + PP_GRTAVFS_HW_RESERVED_5, + PP_GRTAVFS_HW_RESERVED_6, + PP_GRTAVFS_HW_FUSE_COUNT, +} PP_GRTAVFS_HW_FUSE_e; + +typedef enum { + PP_GRTAVFS_FW_COMMON_PPVMIN_Z1_HOT_T0, + PP_GRTAVFS_FW_COMMON_PPVMIN_Z1_COLD_T0, + PP_GRTAVFS_FW_COMMON_PPVMIN_Z2_HOT_T0, + PP_GRTAVFS_FW_COMMON_PPVMIN_Z2_COLD_T0, + PP_GRTAVFS_FW_COMMON_PPVMIN_Z3_HOT_T0, + PP_GRTAVFS_FW_COMMON_PPVMIN_Z3_COLD_T0, + PP_GRTAVFS_FW_COMMON_PPVMIN_Z4_HOT_T0, + PP_GRTAVFS_FW_COMMON_PPVMIN_Z4_COLD_T0, + PP_GRTAVFS_FW_COMMON_SRAM_RM_Z0, + PP_GRTAVFS_FW_COMMON_SRAM_RM_Z1, + PP_GRTAVFS_FW_COMMON_SRAM_RM_Z2, + PP_GRTAVFS_FW_COMMON_SRAM_RM_Z3, + PP_GRTAVFS_FW_COMMON_SRAM_RM_Z4, + PP_GRTAVFS_FW_COMMON_FUSE_COUNT, +} PP_GRTAVFS_FW_COMMON_FUSE_e; + +typedef enum { + PP_GRTAVFS_FW_SEP_FUSE_GB1_PWL_VOLTAGE_NEG_1, + PP_GRTAVFS_FW_SEP_FUSE_GB1_PWL_VOLTAGE_0, + PP_GRTAVFS_FW_SEP_FUSE_GB1_PWL_VOLTAGE_1, + PP_GRTAVFS_FW_SEP_FUSE_GB1_PWL_VOLTAGE_2, + PP_GRTAVFS_FW_SEP_FUSE_GB1_PWL_VOLTAGE_3, + PP_GRTAVFS_FW_SEP_FUSE_GB1_PWL_VOLTAGE_4, + PP_GRTAVFS_FW_SEP_FUSE_GB2_PWL_VOLTAGE_NEG_1, + PP_GRTAVFS_FW_SEP_FUSE_GB2_PWL_VOLTAGE_0, + PP_GRTAVFS_FW_SEP_FUSE_GB2_PWL_VOLTAGE_1, + PP_GRTAVFS_FW_SEP_FUSE_GB2_PWL_VOLTAGE_2, + PP_GRTAVFS_FW_SEP_FUSE_GB2_PWL_VOLTAGE_3, + PP_GRTAVFS_FW_SEP_FUSE_GB2_PWL_VOLTAGE_4, + PP_GRTAVFS_FW_SEP_FUSE_VF_NEG_1_FREQUENCY, + PP_GRTAVFS_FW_SEP_FUSE_VF4_FREQUENCY, + PP_GRTAVFS_FW_SEP_FUSE_FREQUENCY_TO_COUNT_SCALER_0, + PP_GRTAVFS_FW_SEP_FUSE_FREQUENCY_TO_COUNT_SCALER_1, + PP_GRTAVFS_FW_SEP_FUSE_FREQUENCY_TO_COUNT_SCALER_2, + PP_GRTAVFS_FW_SEP_FUSE_FREQUENCY_TO_COUNT_SCALER_3, + PP_GRTAVFS_FW_SEP_FUSE_FREQUENCY_TO_COUNT_SCALER_4, + PP_GRTAVFS_FW_SEP_FUSE_COUNT, +} PP_GRTAVFS_FW_SEP_FUSE_e; + +#define PP_NUM_RTAVFS_PWL_ZONES 5 + + +// VBIOS or PPLIB configures telemetry slope and offset. Only slope expected to be set for SVI3 +// Slope Q1.7, Offset Q1.2 +typedef struct { + int8_t Offset; // in Amps + uint8_t Padding; + uint16_t MaxCurrent; // in Amps +} SviTelemetryScale_t; + +#define PP_NUM_OD_VF_CURVE_POINTS PP_NUM_RTAVFS_PWL_ZONES + 1 + +#define PP_OD_FEATURE_GFX_VF_CURVE_BIT 0 +#define PP_OD_FEATURE_GFX_VMAX_BIT 1 +#define PP_OD_FEATURE_SOC_VMAX_BIT 2 +#define PP_OD_FEATURE_PPT_BIT 3 +#define PP_OD_FEATURE_FAN_CURVE_BIT 4 +#define PP_OD_FEATURE_FAN_LEGACY_BIT 5 +#define PP_OD_FEATURE_FULL_CTRL_BIT 6 +#define PP_OD_FEATURE_TDC_BIT 7 +#define PP_OD_FEATURE_GFXCLK_BIT 8 +#define PP_OD_FEATURE_UCLK_BIT 9 +#define PP_OD_FEATURE_FCLK_BIT 10 +#define PP_OD_FEATURE_ZERO_FAN_BIT 11 +#define PP_OD_FEATURE_TEMPERATURE_BIT 12 +#define PP_OD_FEATURE_EDC_BIT 13 +#define PP_OD_FEATURE_COUNT 14 + +typedef enum { + PP_OD_POWER_FEATURE_ALWAYS_ENABLED, + PP_OD_POWER_FEATURE_DISABLED_WHILE_GAMING, + PP_OD_POWER_FEATURE_ALWAYS_DISABLED, +} PP_OD_POWER_FEATURE_e; + +typedef enum { + FAN_MODE_AUTO = 0, + FAN_MODE_MANUAL_LINEAR, +} FanMode_e; + +typedef enum { + OD_NO_ERROR, + OD_REQUEST_ADVANCED_NOT_SUPPORTED, + OD_UNSUPPORTED_FEATURE, + OD_INVALID_FEATURE_COMBO_ERROR, + OD_GFXCLK_VF_CURVE_OFFSET_ERROR, + OD_VDD_GFX_VMAX_ERROR, + OD_VDD_SOC_VMAX_ERROR, + OD_PPT_ERROR, + OD_FAN_MIN_PWM_ERROR, + OD_FAN_ACOUSTIC_TARGET_ERROR, + OD_FAN_ACOUSTIC_LIMIT_ERROR, + OD_FAN_TARGET_TEMP_ERROR, + OD_FAN_ZERO_RPM_STOP_TEMP_ERROR, + OD_FAN_CURVE_PWM_ERROR, + OD_FAN_CURVE_TEMP_ERROR, + OD_FULL_CTRL_GFXCLK_ERROR, + OD_FULL_CTRL_UCLK_ERROR, + OD_FULL_CTRL_FCLK_ERROR, + OD_FULL_CTRL_VDD_GFX_ERROR, + OD_FULL_CTRL_VDD_SOC_ERROR, + OD_TDC_ERROR, + OD_GFXCLK_ERROR, + OD_UCLK_ERROR, + OD_FCLK_ERROR, + OD_OP_TEMP_ERROR, + OD_OP_GFX_EDC_ERROR, + OD_OP_GFX_PCC_ERROR, + OD_POWER_FEATURE_CTRL_ERROR, +} OD_FAIL_e; + +typedef struct { + uint32_t FeatureCtrlMask; + + //Voltage control + int16_t VoltageOffsetPerZoneBoundary[PP_NUM_OD_VF_CURVE_POINTS]; + + uint16_t VddGfxVmax; // in mV + uint16_t VddSocVmax; + + uint8_t IdlePwrSavingFeaturesCtrl; + uint8_t RuntimePwrSavingFeaturesCtrl; + uint16_t Padding; + + //Frequency changes + int16_t GfxclkFmin; // MHz + int16_t GfxclkFmax; // MHz + uint16_t UclkFmin; // MHz + uint16_t UclkFmax; // MHz + uint16_t FclkFmin; + uint16_t FclkFmax; + + //PPT + int16_t Ppt; // % + int16_t Tdc; + + //Fan control + uint8_t FanLinearPwmPoints[NUM_OD_FAN_MAX_POINTS]; + uint8_t FanLinearTempPoints[NUM_OD_FAN_MAX_POINTS]; + uint16_t FanMinimumPwm; + uint16_t AcousticTargetRpmThreshold; + uint16_t AcousticLimitRpmThreshold; + uint16_t FanTargetTemperature; // Degree Celcius + uint8_t FanZeroRpmEnable; + uint8_t FanZeroRpmStopTemp; + uint8_t FanMode; + uint8_t MaxOpTemp; + + uint8_t AdvancedOdModeEnabled; + uint8_t Padding1[3]; + + uint16_t GfxVoltageFullCtrlMode; + uint16_t SocVoltageFullCtrlMode; + uint16_t GfxclkFullCtrlMode; + uint16_t UclkFullCtrlMode; + uint16_t FclkFullCtrlMode; + uint16_t Padding2; + + int16_t GfxEdc; + int16_t GfxPccLimitControl; + + uint32_t Spare[10]; + uint32_t MmHubPadding[8]; // SMU internal use. Adding here instead of external as a workaround +} OverDriveTable_t; + +typedef struct { + OverDriveTable_t OverDriveTable; + +} OverDriveTableExternal_t; + +typedef struct { + uint32_t FeatureCtrlMask; + + //Gfx Vf Curve + int16_t VoltageOffsetPerZoneBoundary[PP_NUM_OD_VF_CURVE_POINTS]; + //gfx Vmax + uint16_t VddGfxVmax; // in mV + //soc Vmax + uint16_t VddSocVmax; + + //gfxclk + int16_t GfxclkFmin; // MHz + int16_t GfxclkFmax; // MHz + //uclk + uint16_t UclkFmin; // MHz + uint16_t UclkFmax; // MHz + //fclk + uint16_t FclkFmin; + uint16_t FclkFmax; + + //PPT + int16_t Ppt; // % + //TDC + int16_t Tdc; + + //Fan Curve + uint8_t FanLinearPwmPoints[NUM_OD_FAN_MAX_POINTS]; + uint8_t FanLinearTempPoints[NUM_OD_FAN_MAX_POINTS]; + //Fan Legacy + uint16_t FanMinimumPwm; + uint16_t AcousticTargetRpmThreshold; + uint16_t AcousticLimitRpmThreshold; + uint16_t FanTargetTemperature; // Degree Celcius + //zero fan + uint8_t FanZeroRpmEnable; + //temperature + uint8_t MaxOpTemp; + uint8_t Padding[2]; + + //Full Ctrl + uint16_t GfxVoltageFullCtrlMode; + uint16_t SocVoltageFullCtrlMode; + uint16_t GfxclkFullCtrlMode; + uint16_t UclkFullCtrlMode; + uint16_t FclkFullCtrlMode; + //EDC + int16_t GfxEdc; + int16_t GfxPccLimitControl; + int16_t Padding1; + + uint32_t Spare[5]; +} OverDriveLimits_t; + +typedef enum { + BOARD_GPIO_SMUIO_0, + BOARD_GPIO_SMUIO_1, + BOARD_GPIO_SMUIO_2, + BOARD_GPIO_SMUIO_3, + BOARD_GPIO_SMUIO_4, + BOARD_GPIO_SMUIO_5, + BOARD_GPIO_SMUIO_6, + BOARD_GPIO_SMUIO_7, + BOARD_GPIO_SMUIO_8, + BOARD_GPIO_SMUIO_9, + BOARD_GPIO_SMUIO_10, + BOARD_GPIO_SMUIO_11, + BOARD_GPIO_SMUIO_12, + BOARD_GPIO_SMUIO_13, + BOARD_GPIO_SMUIO_14, + BOARD_GPIO_SMUIO_15, + BOARD_GPIO_SMUIO_16, + BOARD_GPIO_SMUIO_17, + BOARD_GPIO_SMUIO_18, + BOARD_GPIO_SMUIO_19, + BOARD_GPIO_SMUIO_20, + BOARD_GPIO_SMUIO_21, + BOARD_GPIO_SMUIO_22, + BOARD_GPIO_SMUIO_23, + BOARD_GPIO_SMUIO_24, + BOARD_GPIO_SMUIO_25, + BOARD_GPIO_SMUIO_26, + BOARD_GPIO_SMUIO_27, + BOARD_GPIO_SMUIO_28, + BOARD_GPIO_SMUIO_29, + BOARD_GPIO_SMUIO_30, + BOARD_GPIO_SMUIO_31, + MAX_BOARD_GPIO_SMUIO_NUM, + BOARD_GPIO_DC_GEN_A, + BOARD_GPIO_DC_GEN_B, + BOARD_GPIO_DC_GEN_C, + BOARD_GPIO_DC_GEN_D, + BOARD_GPIO_DC_GEN_E, + BOARD_GPIO_DC_GEN_F, + BOARD_GPIO_DC_GEN_G, + BOARD_GPIO_DC_GENLK_CLK, + BOARD_GPIO_DC_GENLK_VSYNC, + BOARD_GPIO_DC_SWAPLOCK_A, + BOARD_GPIO_DC_SWAPLOCK_B, + MAX_BOARD_DC_GPIO_NUM, + BOARD_GPIO_LV_EN, +} BOARD_GPIO_TYPE_e; + +#define INVALID_BOARD_GPIO 0xFF + + +typedef struct { + //PLL 0 + uint16_t InitImuClk; + uint16_t InitSocclk; + uint16_t InitMpioclk; + uint16_t InitSmnclk; + //PLL 1 + uint16_t InitDispClk; + uint16_t InitDppClk; + uint16_t InitDprefclk; + uint16_t InitDcfclk; + uint16_t InitDtbclk; + uint16_t InitDbguSocClk; + //PLL 2 + uint16_t InitGfxclk_bypass; + uint16_t InitMp1clk; + uint16_t InitLclk; + uint16_t InitDbguBacoClk; + uint16_t InitBaco400clk; + uint16_t InitBaco1200clk_bypass; + uint16_t InitBaco700clk_bypass; + uint16_t InitBaco500clk; + // PLL 3 + uint16_t InitDclk0; + uint16_t InitVclk0; + // PLL 4 + uint16_t InitFclk; + uint16_t Padding1; + // PLL 5 + //UCLK clocks, assumed all UCLK instances will be the same. + uint8_t InitUclkLevel; // =0,1,2,3,4,5 frequency from FreqTableUclk + + uint8_t Padding[3]; + + uint32_t InitVcoFreqPll0; //smu_socclk_t + uint32_t InitVcoFreqPll1; //smu_displayclk_t + uint32_t InitVcoFreqPll2; //smu_nbioclk_t + uint32_t InitVcoFreqPll3; //smu_vcnclk_t + uint32_t InitVcoFreqPll4; //smu_fclk_t + uint32_t InitVcoFreqPll5; //smu_uclk_01_t + uint32_t InitVcoFreqPll6; //smu_uclk_23_t + uint32_t InitVcoFreqPll7; //smu_uclk_45_t + uint32_t InitVcoFreqPll8; //smu_uclk_67_t + + //encoding will be SVI3 + uint16_t InitGfx; // In mV(Q2) , should be 0? + uint16_t InitSoc; // In mV(Q2) + uint16_t InitVddIoMem; // In mV(Q2) MemVdd + uint16_t InitVddCiMem; // In mV(Q2) VMemP + + //uint16_t Padding2; + + uint32_t Spare[8]; +} BootValues_t; + +typedef struct { + uint16_t Power[PPT_THROTTLER_COUNT][POWER_SOURCE_COUNT]; // Watts + uint16_t Tdc[TDC_THROTTLER_COUNT]; // Amps + + uint16_t Temperature[TEMP_COUNT]; // Celsius + + uint8_t PwmLimitMin; + uint8_t PwmLimitMax; + uint8_t FanTargetTemperature; + uint8_t Spare1[1]; + + uint16_t AcousticTargetRpmThresholdMin; + uint16_t AcousticTargetRpmThresholdMax; + + uint16_t AcousticLimitRpmThresholdMin; + uint16_t AcousticLimitRpmThresholdMax; + + uint16_t PccLimitMin; + uint16_t PccLimitMax; + + uint16_t FanStopTempMin; + uint16_t FanStopTempMax; + uint16_t FanStartTempMin; + uint16_t FanStartTempMax; + + uint16_t PowerMinPpt0[POWER_SOURCE_COUNT]; + uint32_t Spare[11]; +} MsgLimits_t; + +typedef struct { + uint16_t BaseClockAc; + uint16_t GameClockAc; + uint16_t BoostClockAc; + uint16_t BaseClockDc; + uint16_t GameClockDc; + uint16_t BoostClockDc; + + uint32_t Reserved[4]; +} DriverReportedClocks_t; + +typedef struct { + uint8_t DcBtcEnabled; + uint8_t Padding[3]; + + uint16_t DcTol; // mV Q2 + uint16_t DcBtcGb; // mV Q2 + + uint16_t DcBtcMin; // mV Q2 + uint16_t DcBtcMax; // mV Q2 + + LinearInt_t DcBtcGbScalar; +} AvfsDcBtcParams_t; + +typedef struct { + uint16_t AvfsTemp[AVFS_TEMP_COUNT]; //in degrees C + uint16_t VftFMin; // in MHz + uint16_t VInversion; // in mV Q2 + QuadraticInt_t qVft[AVFS_TEMP_COUNT]; + QuadraticInt_t qAvfsGb; + QuadraticInt_t qAvfsGb2; +} AvfsFuseOverride_t; + +//all settings maintained by PFE team +typedef struct { + uint8_t Version; + uint8_t Spare8[3]; + // SECTION: Feature Control + uint32_t FeaturesToRun[NUM_FEATURES / 32]; // Features that PMFW will attempt to enable. Use FEATURE_*_BIT as mapping + // SECTION: FW DSTATE Settings + uint32_t FwDStateMask; // See FW_DSTATE_*_BIT for mapping + // SECTION: Advanced Options + uint32_t DebugOverrides; + + uint32_t Spare[2]; +} PFE_Settings_t; + +typedef struct { + // SECTION: Version + uint32_t Version; // should be unique to each SKU(i.e if any value changes in below structure then this value must be different) + + // SECTION: Miscellaneous Configuration + uint8_t TotalPowerConfig; // Determines how PMFW calculates the power. Use defines from PwrConfig_e + uint8_t CustomerVariant; //To specify if this PPTable is intended for a particular customer. Use defines from CUSTOMER_VARIANT_e + uint8_t MemoryTemperatureTypeMask; // Bit mapping indicating which methods of memory temperature reading are enabled. Use defines from MEM_TEMP_*BIT + uint8_t SmartShiftVersion; // Determine what SmartShift feature version is supported Use defines from SMARTSHIFT_VERSION_e + + // SECTION: Infrastructure Limits + uint8_t SocketPowerLimitSpare[10]; + + //if set to 1, SocketPowerLimitAc and SocketPowerLimitDc will be interpreted as legacy programs(i.e absolute power). If 0, all except index 0 will be scalars + //relative index 0 + uint8_t EnableLegacyPptLimit; + uint8_t UseInputTelemetry; //applicable to SVI3 only and only to be set if VRs support + + uint8_t SmartShiftMinReportedPptinDcs; //minimum possible active power consumption for this SKU. Used for SmartShift power reporting + + uint8_t PaddingPpt[7]; + + uint16_t HwCtfTempLimit; // In degrees Celsius. Temperature above which HW will trigger CTF. Consumed by VBIOS only + + uint16_t PaddingInfra; + + // Per year normalized Vmax state failure rates (sum of the two domains divided by life time in years) + uint32_t FitControllerFailureRateLimit; //in IEEE float + //Expected GFX Duty Cycle at Vmax. + uint32_t FitControllerGfxDutyCycle; // in IEEE float + //Expected SOC Duty Cycle at Vmax. + uint32_t FitControllerSocDutyCycle; // in IEEE float + + //This offset will be deducted from the controller output to before it goes through the SOC Vset limiter block. + uint32_t FitControllerSocOffset; //in IEEE float + + uint32_t GfxApccPlusResidencyLimit; // Percentage value. Used by APCC+ controller to control PCC residency to some value + + // SECTION: Throttler settings + uint32_t ThrottlerControlMask; // See THROTTLER_*_BIT for mapping + + + // SECTION: Voltage Control Parameters + uint16_t UlvVoltageOffset[PMFW_VOLT_PLANE_COUNT]; // In mV(Q2). ULV offset used in either GFX_ULV or SOC_ULV(part of FW_DSTATE) + + uint8_t Padding[2]; + uint16_t DeepUlvVoltageOffsetSoc; // In mV(Q2) Long Idle Vmin (deep ULV), for VDD_SOC as part of FW_DSTATE + + // Voltage Limits + uint16_t DefaultMaxVoltage[PMFW_VOLT_PLANE_COUNT]; // In mV(Q2) Maximum voltage without FIT controller enabled + uint16_t BoostMaxVoltage[PMFW_VOLT_PLANE_COUNT]; // In mV(Q2) Maximum voltage with FIT controller enabled + + //Vmin Optimizations + int16_t VminTempHystersis[PMFW_VOLT_PLANE_COUNT]; // Celsius Temperature hysteresis for switching between low/high temperature values for Vmin + int16_t VminTempThreshold[PMFW_VOLT_PLANE_COUNT]; // Celsius Temperature threshold for switching between low/high temperature values for Vmin + uint16_t Vmin_Hot_T0[PMFW_VOLT_PLANE_COUNT]; //In mV(Q2) Initial (pre-aging) Vset to be used at hot. + uint16_t Vmin_Cold_T0[PMFW_VOLT_PLANE_COUNT]; //In mV(Q2) Initial (pre-aging) Vset to be used at cold. + uint16_t Vmin_Hot_Eol[PMFW_VOLT_PLANE_COUNT]; //In mV(Q2) End-of-life Vset to be used at hot. + uint16_t Vmin_Cold_Eol[PMFW_VOLT_PLANE_COUNT]; //In mV(Q2) End-of-life Vset to be used at cold. + uint16_t Vmin_Aging_Offset[PMFW_VOLT_PLANE_COUNT]; //In mV(Q2) Worst-case aging margin + uint16_t Spare_Vmin_Plat_Offset_Hot[PMFW_VOLT_PLANE_COUNT]; //In mV(Q2) Platform offset apply to T0 Hot + uint16_t Spare_Vmin_Plat_Offset_Cold[PMFW_VOLT_PLANE_COUNT]; //In mV(Q2) Platform offset apply to T0 Cold + + //This is a fixed/minimum VMIN aging degradation offset which is applied at T0. This reflects the minimum amount of aging already accounted for. + uint16_t VcBtcFixedVminAgingOffset[PMFW_VOLT_PLANE_COUNT]; + //Linear offset or GB term to account for mis-correlation between PSM and Vmin shift trends across parts. + uint16_t VcBtcVmin2PsmDegrationGb[PMFW_VOLT_PLANE_COUNT]; + //Scalar coefficient of the PSM aging degradation function + uint32_t VcBtcPsmA[PMFW_VOLT_PLANE_COUNT]; // A_PSM + //Exponential coefficient of the PSM aging degradation function + uint32_t VcBtcPsmB[PMFW_VOLT_PLANE_COUNT]; // B_PSM + //Scalar coefficient of the VMIN aging degradation function. Specified as worst case between hot and cold. + uint32_t VcBtcVminA[PMFW_VOLT_PLANE_COUNT]; // A_VMIN + //Exponential coefficient of the VMIN aging degradation function. Specified as worst case between hot and cold. + uint32_t VcBtcVminB[PMFW_VOLT_PLANE_COUNT]; // B_VMIN + + uint8_t PerPartVminEnabled[PMFW_VOLT_PLANE_COUNT]; + uint8_t VcBtcEnabled[PMFW_VOLT_PLANE_COUNT]; + + uint16_t SocketPowerLimitAcTau[PPT_THROTTLER_COUNT]; // Time constant of LPF in ms + uint16_t SocketPowerLimitDcTau[PPT_THROTTLER_COUNT]; // Time constant of LPF in ms + + QuadraticInt_t Gfx_Vmin_droop; + QuadraticInt_t Soc_Vmin_droop; + uint32_t SpareVmin[6]; + + //SECTION: DPM Configuration 1 + DpmDescriptor_t DpmDescriptor[PPCLK_COUNT]; + + uint16_t FreqTableGfx [NUM_GFXCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableVclk [NUM_VCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableDclk [NUM_DCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableSocclk [NUM_SOCCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableUclk [NUM_UCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableShadowUclk [NUM_UCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableDispclk [NUM_DISPCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableDppClk [NUM_DPPCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableDprefclk [NUM_DPREFCLK_DPM_LEVELS]; // In MHz + uint16_t FreqTableDcfclk [NUM_DCFCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableDtbclk [NUM_DTBCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableFclk [NUM_FCLK_DPM_LEVELS ]; // In MHz + + uint32_t DcModeMaxFreq [PPCLK_COUNT ]; // In MHz + + uint16_t GfxclkAibFmax; + uint16_t GfxclkFreqCap; + + //GFX Idle Power Settings + uint16_t GfxclkFgfxoffEntry; // Entry in RLC stage (PLL), in Mhz + uint16_t GfxclkFgfxoffExitImu; // Exit/Entry in IMU stage (BYPASS), in Mhz + uint16_t GfxclkFgfxoffExitRlc; // Exit in RLC stage (PLL), in Mhz + uint16_t GfxclkThrottleClock; //Used primarily in DCS + uint8_t EnableGfxPowerStagesGpio; //Genlk_vsync GPIO flag used to control gfx power stages + uint8_t GfxIdlePadding; + + uint8_t SmsRepairWRCKClkDivEn; + uint8_t SmsRepairWRCKClkDivVal; + uint8_t GfxOffEntryEarlyMGCGEn; + uint8_t GfxOffEntryForceCGCGEn; + uint8_t GfxOffEntryForceCGCGDelayEn; + uint8_t GfxOffEntryForceCGCGDelayVal; // in microseconds + + uint16_t GfxclkFreqGfxUlv; // in MHz + uint8_t GfxIdlePadding2[2]; + uint32_t GfxOffEntryHysteresis; //For RLC to count after it enters CGCG, and before triggers GFXOFF entry + uint32_t GfxoffSpare[15]; + + // DFLL + uint16_t DfllMstrOscConfigA; //Used for voltage sensitivity slope tuning: 0 = (en_leaker << 9) | (en_vint1_reduce << 8) | (gain_code << 6) | (bias_code << 3) | (vint1_code << 1) | en_bias + uint16_t DfllSlvOscConfigA; //Used for voltage sensitivity slope tuning: 0 = (en_leaker << 9) | (en_vint1_reduce << 8) | (gain_code << 6) | (bias_code << 3) | (vint1_code << 1) | en_bias + uint32_t DfllBtcMasterScalerM; + int32_t DfllBtcMasterScalerB; + uint32_t DfllBtcSlaveScalerM; + int32_t DfllBtcSlaveScalerB; + + uint32_t DfllPccAsWaitCtrl; //GDFLL_AS_WAIT_CTRL_PCC register value to be passed to RLC msg + uint32_t DfllPccAsStepCtrl; //GDFLL_AS_STEP_CTRL_PCC register value to be passed to RLC msg + uint32_t GfxDfllSpare[9]; + + // DVO + uint32_t DvoPsmDownThresholdVoltage; //Voltage float + uint32_t DvoPsmUpThresholdVoltage; //Voltage float + uint32_t DvoFmaxLowScaler; //Unitless float + + // GFX DCS + uint16_t DcsGfxOffVoltage; //Voltage in mV(Q2) applied to VDDGFX when entering DCS GFXOFF phase + uint16_t PaddingDcs; + + uint16_t DcsMinGfxOffTime; //Minimum amount of time PMFW shuts GFX OFF as part of GFX DCS phase + uint16_t DcsMaxGfxOffTime; //Maximum amount of time PMFW can shut GFX OFF as part of GFX DCS phase at a stretch. + + uint32_t DcsMinCreditAccum; //Min amount of positive credit accumulation before waking GFX up as part of DCS. + + uint16_t DcsExitHysteresis; //The min amount of time power credit accumulator should have a value > 0 before SMU exits the DCS throttling phase. + uint16_t DcsTimeout; //This is the amount of time SMU FW waits for RLC to put GFX into GFXOFF before reverting to the fallback mechanism of throttling GFXCLK to Fmin. + + uint32_t DcsPfGfxFopt; //Default to GFX FMIN + uint32_t DcsPfUclkFopt; //Default to UCLK FMIN + + uint8_t FoptEnabled; + uint8_t DcsSpare2[3]; + uint32_t DcsFoptM; //Tuning paramters to shift Fopt calculation, IEEE754 float + uint32_t DcsFoptB; //Tuning paramters to shift Fopt calculation, IEEE754 float + uint32_t DcsSpare[9]; + + // UCLK section + uint8_t UseStrobeModeOptimizations; //Set to indicate that FW should use strobe mode optimizations + uint8_t PaddingMem[3]; + + uint8_t UclkDpmPstates [NUM_UCLK_DPM_LEVELS]; // 6 Primary SW DPM states (6 + 6 Shadow) + uint8_t UclkDpmShadowPstates [NUM_UCLK_DPM_LEVELS]; // 6 Shadow SW DPM states (6 + 6 Shadow) + uint8_t FreqTableUclkDiv [NUM_UCLK_DPM_LEVELS]; // 0:Div-1, 1:Div-1/2, 2:Div-1/4, 3:Div-1/8 + uint8_t FreqTableShadowUclkDiv [NUM_UCLK_DPM_LEVELS]; // 0:Div-1, 1:Div-1/2, 2:Div-1/4, 3:Div-1/8 + uint16_t MemVmempVoltage [NUM_UCLK_DPM_LEVELS]; // mV(Q2) + uint16_t MemVddioVoltage [NUM_UCLK_DPM_LEVELS]; // mV(Q2) + uint16_t DalDcModeMaxUclkFreq; + uint8_t PaddingsMem[2]; + //FCLK Section + uint16_t FclkDpmDisallowPstateFreq; //Frequency which FW will target when indicated that display config cannot support P-state. Set to 0 use FW calculated value + uint16_t PaddingFclk; + + // Link DPM Settings + uint8_t PcieGenSpeed[NUM_LINK_LEVELS]; ///< 0:PciE-gen1 1:PciE-gen2 2:PciE-gen3 3:PciE-gen4 4:PciE-gen5 + uint8_t PcieLaneCount[NUM_LINK_LEVELS]; ///< 1=x1, 2=x2, 3=x4, 4=x8, 5=x12, 6=x16 + uint16_t LclkFreq[NUM_LINK_LEVELS]; + + // SECTION: VDD_GFX AVFS + uint8_t OverrideGfxAvfsFuses; + uint8_t GfxAvfsPadding[3]; + + uint32_t SocHwRtAvfsFuses[PP_GRTAVFS_HW_FUSE_COUNT]; //new added for Soc domain + uint32_t GfxL2HwRtAvfsFuses[PP_GRTAVFS_HW_FUSE_COUNT]; //see fusedoc for encoding + //uint32_t GfxSeHwRtAvfsFuses[PP_GRTAVFS_HW_FUSE_COUNT]; + uint32_t spare_HwRtAvfsFuses[PP_GRTAVFS_HW_FUSE_COUNT]; + + uint32_t SocCommonRtAvfs[PP_GRTAVFS_FW_COMMON_FUSE_COUNT]; + uint32_t GfxCommonRtAvfs[PP_GRTAVFS_FW_COMMON_FUSE_COUNT]; + + uint32_t SocFwRtAvfsFuses[PP_GRTAVFS_FW_SEP_FUSE_COUNT]; + uint32_t GfxL2FwRtAvfsFuses[PP_GRTAVFS_FW_SEP_FUSE_COUNT]; + //uint32_t GfxSeFwRtAvfsFuses[PP_GRTAVFS_FW_SEP_FUSE_COUNT]; + uint32_t spare_FwRtAvfsFuses[PP_GRTAVFS_FW_SEP_FUSE_COUNT]; + + uint32_t Soc_Droop_PWL_F[PP_NUM_RTAVFS_PWL_ZONES]; + uint32_t Soc_Droop_PWL_a[PP_NUM_RTAVFS_PWL_ZONES]; + uint32_t Soc_Droop_PWL_b[PP_NUM_RTAVFS_PWL_ZONES]; + uint32_t Soc_Droop_PWL_c[PP_NUM_RTAVFS_PWL_ZONES]; + + uint32_t Gfx_Droop_PWL_F[PP_NUM_RTAVFS_PWL_ZONES]; + uint32_t Gfx_Droop_PWL_a[PP_NUM_RTAVFS_PWL_ZONES]; + uint32_t Gfx_Droop_PWL_b[PP_NUM_RTAVFS_PWL_ZONES]; + uint32_t Gfx_Droop_PWL_c[PP_NUM_RTAVFS_PWL_ZONES]; + + uint32_t Gfx_Static_PWL_Offset[PP_NUM_RTAVFS_PWL_ZONES]; + uint32_t Soc_Static_PWL_Offset[PP_NUM_RTAVFS_PWL_ZONES]; + + uint32_t dGbV_dT_vmin; + uint32_t dGbV_dT_vmax; + + //Unused: PMFW-9370 + uint32_t V2F_vmin_range_low; + uint32_t V2F_vmin_range_high; + uint32_t V2F_vmax_range_low; + uint32_t V2F_vmax_range_high; + + AvfsDcBtcParams_t DcBtcGfxParams; + QuadraticInt_t SSCurve_GFX; + uint32_t GfxAvfsSpare[29]; + + //SECTION: VDD_SOC AVFS + uint8_t OverrideSocAvfsFuses; + uint8_t MinSocAvfsRevision; + uint8_t SocAvfsPadding[2]; + + AvfsFuseOverride_t SocAvfsFuseOverride[AVFS_D_COUNT]; + + DroopInt_t dBtcGbSoc[AVFS_D_COUNT]; // GHz->V BtcGb + + LinearInt_t qAgingGb[AVFS_D_COUNT]; // GHz->V + + QuadraticInt_t qStaticVoltageOffset[AVFS_D_COUNT]; // GHz->V + + AvfsDcBtcParams_t DcBtcSocParams[AVFS_D_COUNT]; + + QuadraticInt_t SSCurve_SOC; + uint32_t SocAvfsSpare[29]; + + //SECTION: Boot clock and voltage values + BootValues_t BootValues; + + //SECTION: Driver Reported Clocks + DriverReportedClocks_t DriverReportedClocks; + + //SECTION: Message Limits + MsgLimits_t MsgLimits; + + //SECTION: OverDrive Limits + OverDriveLimits_t OverDriveLimitsBasicMin; + OverDriveLimits_t OverDriveLimitsBasicMax; + OverDriveLimits_t OverDriveLimitsAdvancedMin; + OverDriveLimits_t OverDriveLimitsAdvancedMax; + + // Section: Total Board Power idle vs active coefficients + uint8_t TotalBoardPowerSupport; + uint8_t TotalBoardPowerPadding[1]; + uint16_t TotalBoardPowerRoc; + + //PMFW-11158 + QuadraticInt_t qFeffCoeffGameClock[POWER_SOURCE_COUNT]; + QuadraticInt_t qFeffCoeffBaseClock[POWER_SOURCE_COUNT]; + QuadraticInt_t qFeffCoeffBoostClock[POWER_SOURCE_COUNT]; + + // APT GFX to UCLK mapping + int32_t AptUclkGfxclkLookup[POWER_SOURCE_COUNT][6]; + uint32_t AptUclkGfxclkLookupHyst[POWER_SOURCE_COUNT][6]; + uint32_t AptPadding; + + // Xvmin didt + QuadraticInt_t GfxXvminDidtDroopThresh; + uint32_t GfxXvminDidtResetDDWait; + uint32_t GfxXvminDidtClkStopWait; + uint32_t GfxXvminDidtFcsStepCtrl; + uint32_t GfxXvminDidtFcsWaitCtrl; + + // PSM based didt controller + uint32_t PsmModeEnabled; //0: all disabled 1: static mode only 2: dynamic mode only 3:static + dynamic mode + uint32_t P2v_a; // floating point in U32 format + uint32_t P2v_b; + uint32_t P2v_c; + uint32_t T2p_a; + uint32_t T2p_b; + uint32_t T2p_c; + uint32_t P2vTemp; + QuadraticInt_t PsmDidtStaticSettings; + QuadraticInt_t PsmDidtDynamicSettings; + uint8_t PsmDidtAvgDiv; + uint8_t PsmDidtForceStall; + uint16_t PsmDidtReleaseTimer; + uint32_t PsmDidtStallPattern; //Will be written to both pattern 1 and didt_static_level_prog + // CAC EDC + uint32_t Leakage_C0; // in IEEE float + uint32_t Leakage_C1; // in IEEE float + uint32_t Leakage_C2; // in IEEE float + uint32_t Leakage_C3; // in IEEE float + uint32_t Leakage_C4; // in IEEE float + uint32_t Leakage_C5; // in IEEE float + uint32_t GFX_CLK_SCALAR; // in IEEE float + uint32_t GFX_CLK_INTERCEPT; // in IEEE float + uint32_t GFX_CAC_M; // in IEEE float + uint32_t GFX_CAC_B; // in IEEE float + uint32_t VDD_GFX_CurrentLimitGuardband; // in IEEE float + uint32_t DynToTotalCacScalar; // in IEEE + // GFX EDC XVMIN + uint32_t XVmin_Gfx_EdcThreshScalar; + uint32_t XVmin_Gfx_EdcEnableFreq; + uint32_t XVmin_Gfx_EdcPccAsStepCtrl; + uint32_t XVmin_Gfx_EdcPccAsWaitCtrl; + uint16_t XVmin_Gfx_EdcThreshold; + uint16_t XVmin_Gfx_EdcFiltHysWaitCtrl; + // SOC EDC XVMIN + uint32_t XVmin_Soc_EdcThreshScalar; + uint32_t XVmin_Soc_EdcEnableFreq; + uint32_t XVmin_Soc_EdcThreshold; // LPF: number of cycles Xvmin_trig_filt will react. + uint16_t XVmin_Soc_EdcStepUpTime; // 10 bit, refclk count to step up throttle when PCC remains asserted. + uint16_t XVmin_Soc_EdcStepDownTime;// 10 bit, refclk count to step down throttle when PCC remains asserted. + uint8_t XVmin_Soc_EdcInitPccStep; // 3 bit, First Pcc Step number that will applied when PCC asserts. + uint8_t PaddingSocEdc[3]; + + // Fuse Override for SOC and GFX XVMIN + uint8_t GfxXvminFuseOverride; + uint8_t SocXvminFuseOverride; + uint8_t PaddingXvminFuseOverride[2]; + uint8_t GfxXvminFddTempLow; // bit 7: sign, bit 0-6: ABS value + uint8_t GfxXvminFddTempHigh; // bit 7: sign, bit 0-6: ABS value + uint8_t SocXvminFddTempLow; // bit 7: sign, bit 0-6: ABS value + uint8_t SocXvminFddTempHigh; // bit 7: sign, bit 0-6: ABS value + + + uint16_t GfxXvminFddVolt0; // low voltage, in VID + uint16_t GfxXvminFddVolt1; // mid voltage, in VID + uint16_t GfxXvminFddVolt2; // high voltage, in VID + uint16_t SocXvminFddVolt0; // low voltage, in VID + uint16_t SocXvminFddVolt1; // mid voltage, in VID + uint16_t SocXvminFddVolt2; // high voltage, in VID + uint16_t GfxXvminDsFddDsm[6]; // XVMIN DS, same organization with fuse + uint16_t GfxXvminEdcFddDsm[6];// XVMIN GFX EDC, same organization with fuse + uint16_t SocXvminEdcFddDsm[6];// XVMIN SOC EDC, same organization with fuse + + // SECTION: Sku Reserved + uint32_t Spare; + + // Padding for MMHUB - do not modify this + uint32_t MmHubPadding[8]; +} SkuTable_t; + +typedef struct { + uint8_t SlewRateConditions; + uint8_t LoadLineAdjust; + uint8_t VoutOffset; + uint8_t VidMax; + uint8_t VidMin; + uint8_t TenBitTelEn; + uint8_t SixteenBitTelEn; + uint8_t OcpThresh; + uint8_t OcpWarnThresh; + uint8_t OcpSettings; + uint8_t VrhotThresh; + uint8_t OtpThresh; + uint8_t UvpOvpDeltaRef; + uint8_t PhaseShed; + uint8_t Padding[10]; + uint32_t SettingOverrideMask; +} Svi3RegulatorSettings_t; + +typedef struct { + // SECTION: Version + uint32_t Version; //should be unique to each board type + + // SECTION: I2C Control + I2cControllerConfig_t I2cControllers[NUM_I2C_CONTROLLERS]; + + //SECTION SVI3 Board Parameters + uint8_t SlaveAddrMapping[SVI_PLANE_COUNT]; + uint8_t VrPsiSupport[SVI_PLANE_COUNT]; + + uint32_t Svi3SvcSpeed; + uint8_t EnablePsi6[SVI_PLANE_COUNT]; // only applicable in SVI3 + + // SECTION: Voltage Regulator Settings + Svi3RegulatorSettings_t Svi3RegSettings[SVI_PLANE_COUNT]; + + // SECTION: GPIO Settings + uint8_t LedOffGpio; + uint8_t FanOffGpio; + uint8_t GfxVrPowerStageOffGpio; + + uint8_t AcDcGpio; // GPIO pin configured for AC/DC switching + uint8_t AcDcPolarity; // GPIO polarity for AC/DC switching + uint8_t VR0HotGpio; // GPIO pin configured for VR0 HOT event + uint8_t VR0HotPolarity; // GPIO polarity for VR0 HOT event + + uint8_t GthrGpio; // GPIO pin configured for GTHR Event + uint8_t GthrPolarity; // replace GPIO polarity for GTHR + + // LED Display Settings + uint8_t LedPin0; // GPIO number for LedPin[0] + uint8_t LedPin1; // GPIO number for LedPin[1] + uint8_t LedPin2; // GPIO number for LedPin[2] + uint8_t LedEnableMask; + + uint8_t LedPcie; // GPIO number for PCIE results + uint8_t LedError; // GPIO number for Error Cases + uint8_t PaddingLed; + + // SECTION: Clock Spread Spectrum + + // UCLK Spread Spectrum + uint8_t UclkTrainingModeSpreadPercent; // Q4.4 + uint8_t UclkSpreadPadding; + uint16_t UclkSpreadFreq; // kHz + + // UCLK Spread Spectrum + uint8_t UclkSpreadPercent[MEM_VENDOR_COUNT]; + + // DFLL Spread Spectrum + uint8_t GfxclkSpreadEnable; + + // FCLK Spread Spectrum + uint8_t FclkSpreadPercent; // Q4.4 + uint16_t FclkSpreadFreq; // kHz + + // Section: Memory Config + uint8_t DramWidth; // Width of interface to the channel for each DRAM module. See DRAM_BIT_WIDTH_TYPE_e + uint8_t PaddingMem1[7]; + + // SECTION: UMC feature flags + uint8_t HsrEnabled; + uint8_t VddqOffEnabled; + uint8_t PaddingUmcFlags[2]; + + uint32_t PostVoltageSetBacoDelay; // in microseconds. Amount of time FW will wait after power good is established or PSI0 command is issued + uint32_t BacoEntryDelay; // in milliseconds. Amount of time FW will wait to trigger BACO entry after receiving entry notification from OS + + uint8_t FuseWritePowerMuxPresent; + uint8_t FuseWritePadding[3]; + + // SECTION: EDC Params + uint32_t LoadlineGfx; + uint32_t LoadlineSoc; + uint32_t GfxEdcLimit; + uint32_t SocEdcLimit; + + uint32_t RestBoardPower; //power consumed by board that is not captured by the SVI3 input telemetry + uint32_t ConnectorsImpedance; // impedance of the input ATX power connectors + + uint8_t EpcsSens0; //GPIO number for External Power Connector Support Sense0 + uint8_t EpcsSens1; //GPIO Number for External Power Connector Support Sense1 + uint8_t PaddingEpcs[2]; + + // SECTION: Board Reserved + uint32_t BoardSpare[52]; + + // SECTION: Structure Padding + + // Padding for MMHUB - do not modify this + uint32_t MmHubPadding[8]; +} BoardTable_t; + +typedef struct { + // SECTION: Infrastructure Limits + uint16_t SocketPowerLimitAc[PPT_THROTTLER_COUNT]; // In Watts. Power limit that PMFW attempts to control to in AC mode. Multiple limits supported + + uint16_t VrTdcLimit[TDC_THROTTLER_COUNT]; // In Amperes. Current limit associated with VR regulator maximum temperature + + int16_t TotalIdleBoardPowerM; + int16_t TotalIdleBoardPowerB; + int16_t TotalBoardPowerM; + int16_t TotalBoardPowerB; + + uint16_t TemperatureLimit[TEMP_COUNT]; // In degrees Celsius. Temperature limit associated with each input + + // SECTION: Fan Control + uint16_t FanStopTemp[TEMP_COUNT]; //Celsius + uint16_t FanStartTemp[TEMP_COUNT]; //Celsius + + uint16_t FanGain[TEMP_COUNT]; + + uint16_t FanPwmMin; + uint16_t AcousticTargetRpmThreshold; + uint16_t AcousticLimitRpmThreshold; + uint16_t FanMaximumRpm; + uint16_t MGpuAcousticLimitRpmThreshold; + uint16_t FanTargetGfxclk; + uint32_t TempInputSelectMask; + uint8_t FanZeroRpmEnable; + uint8_t FanTachEdgePerRev; + uint16_t FanPadding; + uint16_t FanTargetTemperature[TEMP_COUNT]; + + // The following are AFC override parameters. Leave at 0 to use FW defaults. + int16_t FuzzyFan_ErrorSetDelta; + int16_t FuzzyFan_ErrorRateSetDelta; + int16_t FuzzyFan_PwmSetDelta; + uint16_t FuzzyFan_Reserved; + + uint16_t FwCtfLimit[TEMP_COUNT]; + + uint16_t IntakeTempEnableRPM; + int16_t IntakeTempOffsetTemp; + uint16_t IntakeTempReleaseTemp; + uint16_t IntakeTempHighIntakeAcousticLimit; + + uint16_t IntakeTempAcouticLimitReleaseRate; + int16_t FanAbnormalTempLimitOffset; // FanStalledTempLimitOffset + uint16_t FanStalledTriggerRpm; // + uint16_t FanAbnormalTriggerRpmCoeff; // FanAbnormalTriggerRpm + + uint16_t FanSpare[1]; + uint8_t FanIntakeSensorSupport; + uint8_t FanIntakePadding; + uint32_t FanAmbientPerfBoostThreshold; + uint32_t FanSpare2[12]; + + uint16_t TemperatureLimit_Hynix; // In degrees Celsius. Memory temperature limit associated with Hynix + uint16_t TemperatureLimit_Micron; // In degrees Celsius. Memory temperature limit associated with Micron + uint16_t TemperatureFwCtfLimit_Hynix; + uint16_t TemperatureFwCtfLimit_Micron; + + // SECTION: Board Reserved + uint16_t PlatformTdcLimit[TDC_THROTTLER_COUNT]; // In Amperes. Current limit associated with platform maximum temperature per VR current rail + uint16_t SocketPowerLimitDc[PPT_THROTTLER_COUNT]; // In Watts. Power limit that PMFW attempts to control to in DC mode. Multiple limits supported + uint16_t SocketPowerLimitSmartShift2; // In Watts. Power limit used SmartShift + uint16_t CustomSkuSpare16b; + uint32_t CustomSkuSpare32b[10]; + + // SECTION: Structure Padding + + // Padding for MMHUB - do not modify this + uint32_t MmHubPadding[8]; +} CustomSkuTable_t; + +typedef struct { + PFE_Settings_t PFE_Settings; + SkuTable_t SkuTable; + CustomSkuTable_t CustomSkuTable; + BoardTable_t BoardTable; +} PPTable_t; + +typedef struct { + // Time constant parameters for clock averages in ms + uint16_t GfxclkAverageLpfTau; + uint16_t FclkAverageLpfTau; + uint16_t UclkAverageLpfTau; + uint16_t GfxActivityLpfTau; + uint16_t UclkActivityLpfTau; + uint16_t UclkMaxActivityLpfTau; + uint16_t SocketPowerLpfTau; + uint16_t VcnClkAverageLpfTau; + uint16_t VcnUsageAverageLpfTau; + uint16_t PcieActivityLpTau; +} DriverSmuConfig_t; + +typedef struct { + DriverSmuConfig_t DriverSmuConfig; + + uint32_t Spare[8]; + // Padding - ignore + uint32_t MmHubPadding[8]; // SMU internal use +} DriverSmuConfigExternal_t; + + +typedef struct { + + uint16_t FreqTableGfx [NUM_GFXCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableVclk [NUM_VCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableDclk [NUM_DCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableSocclk [NUM_SOCCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableUclk [NUM_UCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableDispclk [NUM_DISPCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableDppClk [NUM_DPPCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableDprefclk [NUM_DPREFCLK_DPM_LEVELS]; // In MHz + uint16_t FreqTableDcfclk [NUM_DCFCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableDtbclk [NUM_DTBCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableFclk [NUM_FCLK_DPM_LEVELS ]; // In MHz + + uint16_t DcModeMaxFreq [PPCLK_COUNT ]; // In MHz + + uint16_t Padding; + + uint32_t Spare[32]; + + // Padding - ignore + uint32_t MmHubPadding[8]; // SMU internal use + +} DriverInfoTable_t; + +typedef struct { + uint32_t CurrClock[PPCLK_COUNT]; + + uint16_t AverageGfxclkFrequencyTarget; + uint16_t AverageGfxclkFrequencyPreDs; + uint16_t AverageGfxclkFrequencyPostDs; + uint16_t AverageFclkFrequencyPreDs; + uint16_t AverageFclkFrequencyPostDs; + uint16_t AverageMemclkFrequencyPreDs ; // this is scaled to actual memory clock + uint16_t AverageMemclkFrequencyPostDs ; // this is scaled to actual memory clock + uint16_t AverageVclk0Frequency ; + uint16_t AverageDclk0Frequency ; + uint16_t AverageVclk1Frequency ; + uint16_t AverageDclk1Frequency ; + uint16_t PCIeBusy ; + uint16_t dGPU_W_MAX ; + uint16_t padding ; + + uint32_t MetricsCounter ; + + uint16_t AvgVoltage[SVI_PLANE_COUNT]; + uint16_t AvgCurrent[SVI_PLANE_COUNT]; + + uint16_t AverageGfxActivity ; + uint16_t AverageUclkActivity ; + uint16_t Vcn0ActivityPercentage ; + uint16_t Vcn1ActivityPercentage ; + + uint32_t EnergyAccumulator; + uint16_t AverageSocketPower; + uint16_t AverageTotalBoardPower; + + uint16_t AvgTemperature[TEMP_COUNT]; + uint16_t AvgTemperatureFanIntake; + + uint8_t PcieRate ; + uint8_t PcieWidth ; + + uint8_t AvgFanPwm; + uint8_t Padding[1]; + uint16_t AvgFanRpm; + + + uint8_t ThrottlingPercentage[THROTTLER_COUNT]; + uint8_t padding1[3]; + + //metrics for D3hot entry/exit and driver ARM msgs + uint32_t D3HotEntryCountPerMode[D3HOT_SEQUENCE_COUNT]; + uint32_t D3HotExitCountPerMode[D3HOT_SEQUENCE_COUNT]; + uint32_t ArmMsgReceivedCountPerMode[D3HOT_SEQUENCE_COUNT]; + + uint16_t ApuSTAPMSmartShiftLimit; + uint16_t ApuSTAPMLimit; + uint16_t AvgApuSocketPower; + + uint16_t AverageUclkActivity_MAX; + + uint32_t PublicSerialNumberLower; + uint32_t PublicSerialNumberUpper; + +} SmuMetrics_t; + +typedef struct { + SmuMetrics_t SmuMetrics; + uint32_t Spare[30]; + + // Padding - ignore + uint32_t MmHubPadding[8]; // SMU internal use +} SmuMetricsExternal_t; + +typedef struct { + uint8_t WmSetting; + uint8_t Flags; + uint8_t Padding[2]; + +} WatermarkRowGeneric_t; + +#define NUM_WM_RANGES 4 + +typedef enum { + WATERMARKS_CLOCK_RANGE = 0, + WATERMARKS_DUMMY_PSTATE, + WATERMARKS_MALL, + WATERMARKS_COUNT, +} WATERMARKS_FLAGS_e; + +typedef struct { + // Watermarks + WatermarkRowGeneric_t WatermarkRow[NUM_WM_RANGES]; +} Watermarks_t; + +typedef struct { + Watermarks_t Watermarks; + uint32_t Spare[16]; + + uint32_t MmHubPadding[8]; // SMU internal use +} WatermarksExternal_t; + +typedef struct { + uint16_t avgPsmCount[76]; + uint16_t minPsmCount[76]; + uint16_t maxPsmCount[76]; + float avgPsmVoltage[76]; + float minPsmVoltage[76]; + float maxPsmVoltage[76]; +} AvfsDebugTable_t; + +typedef struct { + AvfsDebugTable_t AvfsDebugTable; + + uint32_t MmHubPadding[8]; // SMU internal use +} AvfsDebugTableExternal_t; + + +typedef struct { + uint8_t Gfx_ActiveHystLimit; + uint8_t Gfx_IdleHystLimit; + uint8_t Gfx_FPS; + uint8_t Gfx_MinActiveFreqType; + uint8_t Gfx_BoosterFreqType; + uint8_t PaddingGfx; + uint16_t Gfx_MinActiveFreq; // MHz + uint16_t Gfx_BoosterFreq; // MHz + uint16_t Gfx_PD_Data_time_constant; // Time constant of PD controller in ms + uint32_t Gfx_PD_Data_limit_a; // Q16 + uint32_t Gfx_PD_Data_limit_b; // Q16 + uint32_t Gfx_PD_Data_limit_c; // Q16 + uint32_t Gfx_PD_Data_error_coeff; // Q16 + uint32_t Gfx_PD_Data_error_rate_coeff; // Q16 + + uint8_t Fclk_ActiveHystLimit; + uint8_t Fclk_IdleHystLimit; + uint8_t Fclk_FPS; + uint8_t Fclk_MinActiveFreqType; + uint8_t Fclk_BoosterFreqType; + uint8_t PaddingFclk; + uint16_t Fclk_MinActiveFreq; // MHz + uint16_t Fclk_BoosterFreq; // MHz + uint16_t Fclk_PD_Data_time_constant; // Time constant of PD controller in ms + uint32_t Fclk_PD_Data_limit_a; // Q16 + uint32_t Fclk_PD_Data_limit_b; // Q16 + uint32_t Fclk_PD_Data_limit_c; // Q16 + uint32_t Fclk_PD_Data_error_coeff; // Q16 + uint32_t Fclk_PD_Data_error_rate_coeff; // Q16 + + uint32_t Mem_UpThreshold_Limit[NUM_UCLK_DPM_LEVELS]; // Q16 + uint8_t Mem_UpHystLimit[NUM_UCLK_DPM_LEVELS]; + uint16_t Mem_DownHystLimit[NUM_UCLK_DPM_LEVELS]; + uint16_t Mem_Fps; + +} DpmActivityMonitorCoeffInt_t; + + +typedef struct { + DpmActivityMonitorCoeffInt_t DpmActivityMonitorCoeffInt; + uint32_t MmHubPadding[8]; // SMU internal use +} DpmActivityMonitorCoeffIntExternal_t; + + + +// Workload bits +#define WORKLOAD_PPLIB_DEFAULT_BIT 0 +#define WORKLOAD_PPLIB_FULL_SCREEN_3D_BIT 1 +#define WORKLOAD_PPLIB_POWER_SAVING_BIT 2 +#define WORKLOAD_PPLIB_VIDEO_BIT 3 +#define WORKLOAD_PPLIB_VR_BIT 4 +#define WORKLOAD_PPLIB_COMPUTE_BIT 5 +#define WORKLOAD_PPLIB_CUSTOM_BIT 6 +#define WORKLOAD_PPLIB_WINDOW_3D_BIT 7 +#define WORKLOAD_PPLIB_DIRECT_ML_BIT 8 +#define WORKLOAD_PPLIB_CGVDI_BIT 9 +#define WORKLOAD_PPLIB_COUNT 10 + + +// These defines are used with the following messages: +// SMC_MSG_TransferTableDram2Smu +// SMC_MSG_TransferTableSmu2Dram + +// Table transfer status +#define TABLE_TRANSFER_OK 0x0 +#define TABLE_TRANSFER_FAILED 0xFF +#define TABLE_TRANSFER_PENDING 0xAB + +// Table types +#define TABLE_PPTABLE 0 +#define TABLE_COMBO_PPTABLE 1 +#define TABLE_WATERMARKS 2 +#define TABLE_AVFS_PSM_DEBUG 3 +#define TABLE_PMSTATUSLOG 4 +#define TABLE_SMU_METRICS 5 +#define TABLE_DRIVER_SMU_CONFIG 6 +#define TABLE_ACTIVITY_MONITOR_COEFF 7 +#define TABLE_OVERDRIVE 8 +#define TABLE_I2C_COMMANDS 9 +#define TABLE_DRIVER_INFO 10 +#define TABLE_ECCINFO 11 +#define TABLE_CUSTOM_SKUTABLE 12 +#define TABLE_COUNT 13 + +//IH Interupt ID +#define IH_INTERRUPT_ID_TO_DRIVER 0xFE +#define IH_INTERRUPT_CONTEXT_ID_BACO 0x2 +#define IH_INTERRUPT_CONTEXT_ID_AC 0x3 +#define IH_INTERRUPT_CONTEXT_ID_DC 0x4 +#define IH_INTERRUPT_CONTEXT_ID_AUDIO_D0 0x5 +#define IH_INTERRUPT_CONTEXT_ID_AUDIO_D3 0x6 +#define IH_INTERRUPT_CONTEXT_ID_THERMAL_THROTTLING 0x7 +#define IH_INTERRUPT_CONTEXT_ID_FAN_ABNORMAL 0x8 +#define IH_INTERRUPT_CONTEXT_ID_FAN_RECOVERY 0x9 + +#endif |