diff options
Diffstat (limited to 'drivers/gpu/drm/panel/panel-samsung-s6e63m0-spi.c')
| -rw-r--r-- | drivers/gpu/drm/panel/panel-samsung-s6e63m0-spi.c | 83 |
1 files changed, 31 insertions, 52 deletions
diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e63m0-spi.c b/drivers/gpu/drm/panel/panel-samsung-s6e63m0-spi.c index 326deb3177b6..3669cc3719ce 100644 --- a/drivers/gpu/drm/panel/panel-samsung-s6e63m0-spi.c +++ b/drivers/gpu/drm/panel/panel-samsung-s6e63m0-spi.c @@ -5,62 +5,38 @@ #include <linux/spi/spi.h> #include <linux/delay.h> +#include <drm/drm_mipi_dbi.h> #include <drm/drm_print.h> #include "panel-samsung-s6e63m0.h" -#define DATA_MASK 0x100 +static const u8 s6e63m0_dbi_read_commands[] = { + MCS_READ_ID1, + MCS_READ_ID2, + MCS_READ_ID3, + 0, /* sentinel */ +}; -static int s6e63m0_spi_dcs_read(struct device *dev, const u8 cmd, u8 *data) +static int s6e63m0_spi_dcs_read(struct device *dev, void *trsp, + const u8 cmd, u8 *data) { - struct spi_device *spi = to_spi_device(dev); - u16 buf[1]; - u16 rbuf[1]; + struct mipi_dbi *dbi = trsp; int ret; - /* SPI buffers are always in CPU order */ - buf[0] = (u16)cmd; - ret = spi_write_then_read(spi, buf, 2, rbuf, 2); - dev_dbg(dev, "READ CMD: %04x RET: %04x\n", buf[0], rbuf[0]); - if (!ret) - /* These high 8 bits of the 9 contains the readout */ - *data = (rbuf[0] & 0x1ff) >> 1; + ret = mipi_dbi_command_read(dbi, cmd, data); + if (ret) + dev_err(dev, "error on DBI read command %02x\n", cmd); return ret; } -static int s6e63m0_spi_write_word(struct device *dev, u16 data) -{ - struct spi_device *spi = to_spi_device(dev); - - /* SPI buffers are always in CPU order */ - return spi_write(spi, &data, 2); -} - -static int s6e63m0_spi_dcs_write(struct device *dev, const u8 *data, size_t len) +static int s6e63m0_spi_dcs_write(struct device *dev, void *trsp, + const u8 *data, size_t len) { - int ret = 0; - - dev_dbg(dev, "SPI writing dcs seq: %*ph\n", (int)len, data); - - /* - * This sends 9 bits with the first bit (bit 8) set to 0 - * This indicates that this is a command. Anything after the - * command is data. - */ - ret = s6e63m0_spi_write_word(dev, *data); - - while (!ret && --len) { - ++data; - /* This sends 9 bits with the first bit (bit 8) set to 1 */ - ret = s6e63m0_spi_write_word(dev, *data | DATA_MASK); - } - - if (ret) { - dev_err(dev, "SPI error %d writing dcs seq: %*ph\n", ret, - (int)len, data); - } + struct mipi_dbi *dbi = trsp; + int ret; + ret = mipi_dbi_command_stackbuf(dbi, data[0], (data + 1), (len - 1)); usleep_range(300, 310); return ret; @@ -69,18 +45,21 @@ static int s6e63m0_spi_dcs_write(struct device *dev, const u8 *data, size_t len) static int s6e63m0_spi_probe(struct spi_device *spi) { struct device *dev = &spi->dev; + struct mipi_dbi *dbi; int ret; - spi->bits_per_word = 9; - /* Preserve e.g. SPI_3WIRE setting */ - spi->mode |= SPI_MODE_3; - ret = spi_setup(spi); - if (ret < 0) { - dev_err(dev, "spi setup failed.\n"); - return ret; - } - return s6e63m0_probe(dev, s6e63m0_spi_dcs_read, s6e63m0_spi_dcs_write, - false); + dbi = devm_kzalloc(dev, sizeof(*dbi), GFP_KERNEL); + if (!dbi) + return -ENOMEM; + + ret = mipi_dbi_spi_init(spi, dbi, NULL); + if (ret) + return dev_err_probe(dev, ret, "MIPI DBI init failed\n"); + /* Register our custom MCS read commands */ + dbi->read_commands = s6e63m0_dbi_read_commands; + + return s6e63m0_probe(dev, dbi, s6e63m0_spi_dcs_read, + s6e63m0_spi_dcs_write, false); } static int s6e63m0_spi_remove(struct spi_device *spi) |