diff options
Diffstat (limited to 'drivers/gpu/drm/panel/panel-sitronix-st7703.c')
| -rw-r--r-- | drivers/gpu/drm/panel/panel-sitronix-st7703.c | 654 |
1 files changed, 654 insertions, 0 deletions
diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7703.c b/drivers/gpu/drm/panel/panel-sitronix-st7703.c new file mode 100644 index 000000000000..8996ced2b721 --- /dev/null +++ b/drivers/gpu/drm/panel/panel-sitronix-st7703.c @@ -0,0 +1,654 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for panels based on Sitronix ST7703 controller, souch as: + * + * - Rocktech jh057n00900 5.5" MIPI-DSI panel + * + * Copyright (C) Purism SPC 2019 + */ + +#include <linux/debugfs.h> +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/media-bus-format.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/regulator/consumer.h> + +#include <video/display_timing.h> +#include <video/mipi_display.h> + +#include <drm/drm_mipi_dsi.h> +#include <drm/drm_modes.h> +#include <drm/drm_panel.h> +#include <drm/drm_print.h> + +#define DRV_NAME "panel-sitronix-st7703" + +/* Manufacturer specific Commands send via DSI */ +#define ST7703_CMD_ALL_PIXEL_OFF 0x22 +#define ST7703_CMD_ALL_PIXEL_ON 0x23 +#define ST7703_CMD_SETDISP 0xB2 +#define ST7703_CMD_SETRGBIF 0xB3 +#define ST7703_CMD_SETCYC 0xB4 +#define ST7703_CMD_SETBGP 0xB5 +#define ST7703_CMD_SETVCOM 0xB6 +#define ST7703_CMD_SETOTP 0xB7 +#define ST7703_CMD_SETPOWER_EXT 0xB8 +#define ST7703_CMD_SETEXTC 0xB9 +#define ST7703_CMD_SETMIPI 0xBA +#define ST7703_CMD_SETVDC 0xBC +#define ST7703_CMD_UNKNOWN_BF 0xBF +#define ST7703_CMD_SETSCR 0xC0 +#define ST7703_CMD_SETPOWER 0xC1 +#define ST7703_CMD_SETPANEL 0xCC +#define ST7703_CMD_UNKNOWN_C6 0xC6 +#define ST7703_CMD_SETGAMMA 0xE0 +#define ST7703_CMD_SETEQ 0xE3 +#define ST7703_CMD_SETGIP1 0xE9 +#define ST7703_CMD_SETGIP2 0xEA + +struct st7703 { + struct device *dev; + struct drm_panel panel; + struct gpio_desc *reset_gpio; + struct regulator *vcc; + struct regulator *iovcc; + bool prepared; + + struct dentry *debugfs; + const struct st7703_panel_desc *desc; +}; + +struct st7703_panel_desc { + const struct drm_display_mode *mode; + unsigned int lanes; + unsigned long mode_flags; + enum mipi_dsi_pixel_format format; + int (*init_sequence)(struct st7703 *ctx); +}; + +static inline struct st7703 *panel_to_st7703(struct drm_panel *panel) +{ + return container_of(panel, struct st7703, panel); +} + +#define dsi_generic_write_seq(dsi, seq...) do { \ + static const u8 d[] = { seq }; \ + int ret; \ + ret = mipi_dsi_generic_write(dsi, d, ARRAY_SIZE(d)); \ + if (ret < 0) \ + return ret; \ + } while (0) + +static int jh057n_init_sequence(struct st7703 *ctx) +{ + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + + /* + * Init sequence was supplied by the panel vendor. Most of the commands + * resemble the ST7703 but the number of parameters often don't match + * so it's likely a clone. + */ + dsi_generic_write_seq(dsi, ST7703_CMD_SETEXTC, + 0xF1, 0x12, 0x83); + dsi_generic_write_seq(dsi, ST7703_CMD_SETRGBIF, + 0x10, 0x10, 0x05, 0x05, 0x03, 0xFF, 0x00, 0x00, + 0x00, 0x00); + dsi_generic_write_seq(dsi, ST7703_CMD_SETSCR, + 0x73, 0x73, 0x50, 0x50, 0x00, 0x00, 0x08, 0x70, + 0x00); + dsi_generic_write_seq(dsi, ST7703_CMD_SETVDC, 0x4E); + dsi_generic_write_seq(dsi, ST7703_CMD_SETPANEL, 0x0B); + dsi_generic_write_seq(dsi, ST7703_CMD_SETCYC, 0x80); + dsi_generic_write_seq(dsi, ST7703_CMD_SETDISP, 0xF0, 0x12, 0x30); + dsi_generic_write_seq(dsi, ST7703_CMD_SETEQ, + 0x07, 0x07, 0x0B, 0x0B, 0x03, 0x0B, 0x00, 0x00, + 0x00, 0x00, 0xFF, 0x00, 0xC0, 0x10); + dsi_generic_write_seq(dsi, ST7703_CMD_SETBGP, 0x08, 0x08); + msleep(20); + + dsi_generic_write_seq(dsi, ST7703_CMD_SETVCOM, 0x3F, 0x3F); + dsi_generic_write_seq(dsi, ST7703_CMD_UNKNOWN_BF, 0x02, 0x11, 0x00); + dsi_generic_write_seq(dsi, ST7703_CMD_SETGIP1, + 0x82, 0x10, 0x06, 0x05, 0x9E, 0x0A, 0xA5, 0x12, + 0x31, 0x23, 0x37, 0x83, 0x04, 0xBC, 0x27, 0x38, + 0x0C, 0x00, 0x03, 0x00, 0x00, 0x00, 0x0C, 0x00, + 0x03, 0x00, 0x00, 0x00, 0x75, 0x75, 0x31, 0x88, + 0x88, 0x88, 0x88, 0x88, 0x88, 0x13, 0x88, 0x64, + 0x64, 0x20, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88, + 0x02, 0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00); + dsi_generic_write_seq(dsi, ST7703_CMD_SETGIP2, + 0x02, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x02, 0x46, 0x02, 0x88, + 0x88, 0x88, 0x88, 0x88, 0x88, 0x64, 0x88, 0x13, + 0x57, 0x13, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88, + 0x75, 0x88, 0x23, 0x14, 0x00, 0x00, 0x02, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x0A, + 0xA5, 0x00, 0x00, 0x00, 0x00); + dsi_generic_write_seq(dsi, ST7703_CMD_SETGAMMA, + 0x00, 0x09, 0x0E, 0x29, 0x2D, 0x3C, 0x41, 0x37, + 0x07, 0x0B, 0x0D, 0x10, 0x11, 0x0F, 0x10, 0x11, + 0x18, 0x00, 0x09, 0x0E, 0x29, 0x2D, 0x3C, 0x41, + 0x37, 0x07, 0x0B, 0x0D, 0x10, 0x11, 0x0F, 0x10, + 0x11, 0x18); + + return 0; +} + +static const struct drm_display_mode jh057n00900_mode = { + .hdisplay = 720, + .hsync_start = 720 + 90, + .hsync_end = 720 + 90 + 20, + .htotal = 720 + 90 + 20 + 20, + .vdisplay = 1440, + .vsync_start = 1440 + 20, + .vsync_end = 1440 + 20 + 4, + .vtotal = 1440 + 20 + 4 + 12, + .clock = 75276, + .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, + .width_mm = 65, + .height_mm = 130, +}; + +struct st7703_panel_desc jh057n00900_panel_desc = { + .mode = &jh057n00900_mode, + .lanes = 4, + .mode_flags = MIPI_DSI_MODE_VIDEO | + MIPI_DSI_MODE_VIDEO_BURST | MIPI_DSI_MODE_VIDEO_SYNC_PULSE, + .format = MIPI_DSI_FMT_RGB888, + .init_sequence = jh057n_init_sequence, +}; + +#define dsi_dcs_write_seq(dsi, cmd, seq...) do { \ + static const u8 d[] = { seq }; \ + int ret; \ + ret = mipi_dsi_dcs_write(dsi, cmd, d, ARRAY_SIZE(d)); \ + if (ret < 0) \ + return ret; \ + } while (0) + + +static int xbd599_init_sequence(struct st7703 *ctx) +{ + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + + /* + * Init sequence was supplied by the panel vendor. + */ + + /* Magic sequence to unlock user commands below. */ + dsi_dcs_write_seq(dsi, ST7703_CMD_SETEXTC, 0xF1, 0x12, 0x83); + + dsi_dcs_write_seq(dsi, ST7703_CMD_SETMIPI, + 0x33, /* VC_main = 0, Lane_Number = 3 (4 lanes) */ + 0x81, /* DSI_LDO_SEL = 1.7V, RTERM = 90 Ohm */ + 0x05, /* IHSRX = x6 (Low High Speed driving ability) */ + 0xF9, /* TX_CLK_SEL = fDSICLK/16 */ + 0x0E, /* HFP_OSC (min. HFP number in DSI mode) */ + 0x0E, /* HBP_OSC (min. HBP number in DSI mode) */ + /* The rest is undocumented in ST7703 datasheet */ + 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x44, 0x25, 0x00, 0x91, 0x0a, 0x00, 0x00, 0x02, + 0x4F, 0x11, 0x00, 0x00, 0x37); + + dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER_EXT, + 0x25, /* PCCS = 2, ECP_DC_DIV = 1/4 HSYNC */ + 0x22, /* DT = 15ms XDK_ECP = x2 */ + 0x20, /* PFM_DC_DIV = /1 */ + 0x03 /* ECP_SYNC_EN = 1, VGX_SYNC_EN = 1 */); + + /* RGB I/F porch timing */ + dsi_dcs_write_seq(dsi, ST7703_CMD_SETRGBIF, + 0x10, /* VBP_RGB_GEN */ + 0x10, /* VFP_RGB_GEN */ + 0x05, /* DE_BP_RGB_GEN */ + 0x05, /* DE_FP_RGB_GEN */ + /* The rest is undocumented in ST7703 datasheet */ + 0x03, 0xFF, + 0x00, 0x00, + 0x00, 0x00); + + /* Source driving settings. */ + dsi_dcs_write_seq(dsi, ST7703_CMD_SETSCR, + 0x73, /* N_POPON */ + 0x73, /* N_NOPON */ + 0x50, /* I_POPON */ + 0x50, /* I_NOPON */ + 0x00, /* SCR[31,24] */ + 0xC0, /* SCR[23,16] */ + 0x08, /* SCR[15,8] */ + 0x70, /* SCR[7,0] */ + 0x00 /* Undocumented */); + + /* NVDDD_SEL = -1.8V, VDDD_SEL = out of range (possibly 1.9V?) */ + dsi_dcs_write_seq(dsi, ST7703_CMD_SETVDC, 0x4E); + + /* + * SS_PANEL = 1 (reverse scan), GS_PANEL = 0 (normal scan) + * REV_PANEL = 1 (normally black panel), BGR_PANEL = 1 (BGR) + */ + dsi_dcs_write_seq(dsi, ST7703_CMD_SETPANEL, 0x0B); + + /* Zig-Zag Type C column inversion. */ + dsi_dcs_write_seq(dsi, ST7703_CMD_SETCYC, 0x80); + + /* Set display resolution. */ + dsi_dcs_write_seq(dsi, ST7703_CMD_SETDISP, + 0xF0, /* NL = 240 */ + 0x12, /* RES_V_LSB = 0, BLK_CON = VSSD, + * RESO_SEL = 720RGB + */ + 0xF0 /* WHITE_GND_EN = 1 (GND), + * WHITE_FRAME_SEL = 7 frames, + * ISC = 0 frames + */); + + dsi_dcs_write_seq(dsi, ST7703_CMD_SETEQ, + 0x00, /* PNOEQ */ + 0x00, /* NNOEQ */ + 0x0B, /* PEQGND */ + 0x0B, /* NEQGND */ + 0x10, /* PEQVCI */ + 0x10, /* NEQVCI */ + 0x00, /* PEQVCI1 */ + 0x00, /* NEQVCI1 */ + 0x00, /* reserved */ + 0x00, /* reserved */ + 0xFF, /* reserved */ + 0x00, /* reserved */ + 0xC0, /* ESD_DET_DATA_WHITE = 1, ESD_WHITE_EN = 1 */ + 0x10 /* SLPIN_OPTION = 1 (no need vsync after sleep-in) + * VEDIO_NO_CHECK_EN = 0 + * ESD_WHITE_GND_EN = 0 + * ESD_DET_TIME_SEL = 0 frames + */); + + /* Undocumented command. */ + dsi_dcs_write_seq(dsi, ST7703_CMD_UNKNOWN_C6, 0x01, 0x00, 0xFF, 0xFF, 0x00); + + dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER, + 0x74, /* VBTHS, VBTLS: VGH = 17V, VBL = -11V */ + 0x00, /* FBOFF_VGH = 0, FBOFF_VGL = 0 */ + 0x32, /* VRP */ + 0x32, /* VRN */ + 0x77, /* reserved */ + 0xF1, /* APS = 1 (small), + * VGL_DET_EN = 1, VGH_DET_EN = 1, + * VGL_TURBO = 1, VGH_TURBO = 1 + */ + 0xFF, /* VGH1_L_DIV, VGL1_L_DIV (1.5MHz) */ + 0xFF, /* VGH1_R_DIV, VGL1_R_DIV (1.5MHz) */ + 0xCC, /* VGH2_L_DIV, VGL2_L_DIV (2.6MHz) */ + 0xCC, /* VGH2_R_DIV, VGL2_R_DIV (2.6MHz) */ + 0x77, /* VGH3_L_DIV, VGL3_L_DIV (4.5MHz) */ + 0x77 /* VGH3_R_DIV, VGL3_R_DIV (4.5MHz) */); + + /* Reference voltage. */ + dsi_dcs_write_seq(dsi, ST7703_CMD_SETBGP, + 0x07, /* VREF_SEL = 4.2V */ + 0x07 /* NVREF_SEL = 4.2V */); + msleep(20); + + dsi_dcs_write_seq(dsi, ST7703_CMD_SETVCOM, + 0x2C, /* VCOMDC_F = -0.67V */ + 0x2C /* VCOMDC_B = -0.67V */); + + /* Undocumented command. */ + dsi_dcs_write_seq(dsi, ST7703_CMD_UNKNOWN_BF, 0x02, 0x11, 0x00); + + /* This command is to set forward GIP timing. */ + dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP1, + 0x82, 0x10, 0x06, 0x05, 0xA2, 0x0A, 0xA5, 0x12, + 0x31, 0x23, 0x37, 0x83, 0x04, 0xBC, 0x27, 0x38, + 0x0C, 0x00, 0x03, 0x00, 0x00, 0x00, 0x0C, 0x00, + 0x03, 0x00, 0x00, 0x00, 0x75, 0x75, 0x31, 0x88, + 0x88, 0x88, 0x88, 0x88, 0x88, 0x13, 0x88, 0x64, + 0x64, 0x20, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88, + 0x02, 0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00); + + /* This command is to set backward GIP timing. */ + dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP2, + 0x02, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x02, 0x46, 0x02, 0x88, + 0x88, 0x88, 0x88, 0x88, 0x88, 0x64, 0x88, 0x13, + 0x57, 0x13, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88, + 0x75, 0x88, 0x23, 0x14, 0x00, 0x00, 0x02, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x0A, + 0xA5, 0x00, 0x00, 0x00, 0x00); + + /* Adjust the gamma characteristics of the panel. */ + dsi_dcs_write_seq(dsi, ST7703_CMD_SETGAMMA, + 0x00, 0x09, 0x0D, 0x23, 0x27, 0x3C, 0x41, 0x35, + 0x07, 0x0D, 0x0E, 0x12, 0x13, 0x10, 0x12, 0x12, + 0x18, 0x00, 0x09, 0x0D, 0x23, 0x27, 0x3C, 0x41, + 0x35, 0x07, 0x0D, 0x0E, 0x12, 0x13, 0x10, 0x12, + 0x12, 0x18); + + return 0; +} + +static const struct drm_display_mode xbd599_mode = { + .hdisplay = 720, + .hsync_start = 720 + 40, + .hsync_end = 720 + 40 + 40, + .htotal = 720 + 40 + 40 + 40, + .vdisplay = 1440, + .vsync_start = 1440 + 18, + .vsync_end = 1440 + 18 + 10, + .vtotal = 1440 + 18 + 10 + 17, + .clock = 69000, + .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, + .width_mm = 68, + .height_mm = 136, +}; + +static const struct st7703_panel_desc xbd599_desc = { + .mode = &xbd599_mode, + .lanes = 4, + .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE, + .format = MIPI_DSI_FMT_RGB888, + .init_sequence = xbd599_init_sequence, +}; + +static int st7703_enable(struct drm_panel *panel) +{ + struct st7703 *ctx = panel_to_st7703(panel); + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + int ret; + + ret = ctx->desc->init_sequence(ctx); + if (ret < 0) { + DRM_DEV_ERROR(ctx->dev, "Panel init sequence failed: %d\n", + ret); + return ret; + } + + msleep(20); + + ret = mipi_dsi_dcs_exit_sleep_mode(dsi); + if (ret < 0) { + DRM_DEV_ERROR(ctx->dev, "Failed to exit sleep mode: %d\n", ret); + return ret; + } + + /* Panel is operational 120 msec after reset */ + msleep(60); + + ret = mipi_dsi_dcs_set_display_on(dsi); + if (ret) + return ret; + + DRM_DEV_DEBUG_DRIVER(ctx->dev, "Panel init sequence done\n"); + + return 0; +} + +static int st7703_disable(struct drm_panel *panel) +{ + struct st7703 *ctx = panel_to_st7703(panel); + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + int ret; + + ret = mipi_dsi_dcs_set_display_off(dsi); + if (ret < 0) + DRM_DEV_ERROR(ctx->dev, + "Failed to turn off the display: %d\n", ret); + + ret = mipi_dsi_dcs_enter_sleep_mode(dsi); + if (ret < 0) + DRM_DEV_ERROR(ctx->dev, + "Failed to enter sleep mode: %d\n", ret); + + return 0; +} + +static int st7703_unprepare(struct drm_panel *panel) +{ + struct st7703 *ctx = panel_to_st7703(panel); + + if (!ctx->prepared) + return 0; + + gpiod_set_value_cansleep(ctx->reset_gpio, 1); + regulator_disable(ctx->iovcc); + regulator_disable(ctx->vcc); + ctx->prepared = false; + + return 0; +} + +static int st7703_prepare(struct drm_panel *panel) +{ + struct st7703 *ctx = panel_to_st7703(panel); + int ret; + + if (ctx->prepared) + return 0; + + DRM_DEV_DEBUG_DRIVER(ctx->dev, "Resetting the panel\n"); + ret = regulator_enable(ctx->vcc); + if (ret < 0) { + DRM_DEV_ERROR(ctx->dev, + "Failed to enable vcc supply: %d\n", ret); + return ret; + } + ret = regulator_enable(ctx->iovcc); + if (ret < 0) { + DRM_DEV_ERROR(ctx->dev, + "Failed to enable iovcc supply: %d\n", ret); + goto disable_vcc; + } + + gpiod_set_value_cansleep(ctx->reset_gpio, 1); + usleep_range(20, 40); + gpiod_set_value_cansleep(ctx->reset_gpio, 0); + msleep(20); + + ctx->prepared = true; + + return 0; + +disable_vcc: + regulator_disable(ctx->vcc); + return ret; +} + +static int st7703_get_modes(struct drm_panel *panel, + struct drm_connector *connector) +{ + struct st7703 *ctx = panel_to_st7703(panel); + struct drm_display_mode *mode; + + mode = drm_mode_duplicate(connector->dev, ctx->desc->mode); + if (!mode) { + DRM_DEV_ERROR(ctx->dev, "Failed to add mode %ux%u@%u\n", + ctx->desc->mode->hdisplay, ctx->desc->mode->vdisplay, + drm_mode_vrefresh(ctx->desc->mode)); + return -ENOMEM; + } + + drm_mode_set_name(mode); + + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; + connector->display_info.width_mm = mode->width_mm; + connector->display_info.height_mm = mode->height_mm; + drm_mode_probed_add(connector, mode); + + return 1; +} + +static const struct drm_panel_funcs st7703_drm_funcs = { + .disable = st7703_disable, + .unprepare = st7703_unprepare, + .prepare = st7703_prepare, + .enable = st7703_enable, + .get_modes = st7703_get_modes, +}; + +static int allpixelson_set(void *data, u64 val) +{ + struct st7703 *ctx = data; + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + + DRM_DEV_DEBUG_DRIVER(ctx->dev, "Setting all pixels on\n"); + dsi_generic_write_seq(dsi, ST7703_CMD_ALL_PIXEL_ON); + msleep(val * 1000); + /* Reset the panel to get video back */ + drm_panel_disable(&ctx->panel); + drm_panel_unprepare(&ctx->panel); + drm_panel_prepare(&ctx->panel); + drm_panel_enable(&ctx->panel); + + return 0; +} + +DEFINE_SIMPLE_ATTRIBUTE(allpixelson_fops, NULL, + allpixelson_set, "%llu\n"); + +static void st7703_debugfs_init(struct st7703 *ctx) +{ + ctx->debugfs = debugfs_create_dir(DRV_NAME, NULL); + + debugfs_create_file("allpixelson", 0600, ctx->debugfs, ctx, + &allpixelson_fops); +} + +static void st7703_debugfs_remove(struct st7703 *ctx) +{ + debugfs_remove_recursive(ctx->debugfs); + ctx->debugfs = NULL; +} + +static int st7703_probe(struct mipi_dsi_device *dsi) +{ + struct device *dev = &dsi->dev; + struct st7703 *ctx; + int ret; + + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return -ENOMEM; + + ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(ctx->reset_gpio)) { + DRM_DEV_ERROR(dev, "cannot get reset gpio\n"); + return PTR_ERR(ctx->reset_gpio); + } + + mipi_dsi_set_drvdata(dsi, ctx); + + ctx->dev = dev; + ctx->desc = of_device_get_match_data(dev); + + dsi->mode_flags = ctx->desc->mode_flags; + dsi->format = ctx->desc->format; + dsi->lanes = ctx->desc->lanes; + + ctx->vcc = devm_regulator_get(dev, "vcc"); + if (IS_ERR(ctx->vcc)) { + ret = PTR_ERR(ctx->vcc); + if (ret != -EPROBE_DEFER) + DRM_DEV_ERROR(dev, + "Failed to request vcc regulator: %d\n", + ret); + return ret; + } + ctx->iovcc = devm_regulator_get(dev, "iovcc"); + if (IS_ERR(ctx->iovcc)) { + ret = PTR_ERR(ctx->iovcc); + if (ret != -EPROBE_DEFER) + DRM_DEV_ERROR(dev, + "Failed to request iovcc regulator: %d\n", + ret); + return ret; + } + + drm_panel_init(&ctx->panel, dev, &st7703_drm_funcs, + DRM_MODE_CONNECTOR_DSI); + + ret = drm_panel_of_backlight(&ctx->panel); + if (ret) + return ret; + + drm_panel_add(&ctx->panel); + + ret = mipi_dsi_attach(dsi); + if (ret < 0) { + DRM_DEV_ERROR(dev, + "mipi_dsi_attach failed (%d). Is host ready?\n", + ret); + drm_panel_remove(&ctx->panel); + return ret; + } + + DRM_DEV_INFO(dev, "%ux%u@%u %ubpp dsi %udl - ready\n", + ctx->desc->mode->hdisplay, ctx->desc->mode->vdisplay, + drm_mode_vrefresh(ctx->desc->mode), + mipi_dsi_pixel_format_to_bpp(dsi->format), dsi->lanes); + + st7703_debugfs_init(ctx); + return 0; +} + +static void st7703_shutdown(struct mipi_dsi_device *dsi) +{ + struct st7703 *ctx = mipi_dsi_get_drvdata(dsi); + int ret; + + ret = drm_panel_unprepare(&ctx->panel); + if (ret < 0) + DRM_DEV_ERROR(&dsi->dev, "Failed to unprepare panel: %d\n", + ret); + + ret = drm_panel_disable(&ctx->panel); + if (ret < 0) + DRM_DEV_ERROR(&dsi->dev, "Failed to disable panel: %d\n", + ret); +} + +static int st7703_remove(struct mipi_dsi_device *dsi) +{ + struct st7703 *ctx = mipi_dsi_get_drvdata(dsi); + int ret; + + st7703_shutdown(dsi); + + ret = mipi_dsi_detach(dsi); + if (ret < 0) + DRM_DEV_ERROR(&dsi->dev, "Failed to detach from DSI host: %d\n", + ret); + + drm_panel_remove(&ctx->panel); + + st7703_debugfs_remove(ctx); + + return 0; +} + +static const struct of_device_id st7703_of_match[] = { + { .compatible = "rocktech,jh057n00900", .data = &jh057n00900_panel_desc }, + { .compatible = "xingbangda,xbd599", .data = &xbd599_desc }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, st7703_of_match); + +static struct mipi_dsi_driver st7703_driver = { + .probe = st7703_probe, + .remove = st7703_remove, + .shutdown = st7703_shutdown, + .driver = { + .name = DRV_NAME, + .of_match_table = st7703_of_match, + }, +}; +module_mipi_dsi_driver(st7703_driver); + +MODULE_AUTHOR("Guido Günther <agx@sigxcpu.org>"); +MODULE_DESCRIPTION("DRM driver for Sitronix ST7703 based MIPI DSI panels"); +MODULE_LICENSE("GPL v2"); |