diff options
Diffstat (limited to 'drivers/hwmon/aquacomputer_d5next.c')
-rw-r--r-- | drivers/hwmon/aquacomputer_d5next.c | 31 |
1 files changed, 26 insertions, 5 deletions
diff --git a/drivers/hwmon/aquacomputer_d5next.c b/drivers/hwmon/aquacomputer_d5next.c index 535d2fc0e55c..eb185318098a 100644 --- a/drivers/hwmon/aquacomputer_d5next.c +++ b/drivers/hwmon/aquacomputer_d5next.c @@ -56,6 +56,7 @@ static const char *const aqc_device_names[] = { #define SERIAL_PART_OFFSET 2 #define CTRL_REPORT_ID 0x03 +#define AQUAERO_CTRL_REPORT_ID 0x0b /* The HID report that the official software always sends * after writing values, currently same for all devices @@ -67,6 +68,14 @@ static u8 secondary_ctrl_report[] = { 0x02, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x34, 0xC6 }; +/* Secondary HID report values for Aquaero */ +#define AQUAERO_SECONDARY_CTRL_REPORT_ID 0x06 +#define AQUAERO_SECONDARY_CTRL_REPORT_SIZE 0x07 + +static u8 aquaero_secondary_ctrl_report[] = { + 0x06, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00 +}; + /* Report IDs for legacy devices */ #define POWERADJUST3_STATUS_REPORT_ID 0x03 @@ -94,6 +103,7 @@ static u8 secondary_ctrl_report[] = { #define AQUAERO_NUM_VIRTUAL_SENSORS 8 #define AQUAERO_NUM_CALC_VIRTUAL_SENSORS 4 #define AQUAERO_NUM_FLOW_SENSORS 2 +#define AQUAERO_CTRL_REPORT_SIZE 0xa93 /* Sensor report offsets for Aquaero fan controllers */ #define AQUAERO_SENSOR_START 0x65 @@ -531,12 +541,16 @@ static int aqc_send_ctrl_data(struct aqc_data *priv) int ret; u16 checksum; - /* Init and xorout value for CRC-16/USB is 0xffff */ - checksum = crc16(0xffff, priv->buffer + priv->checksum_start, priv->checksum_length); - checksum ^= 0xffff; + /* Checksum is not needed for Aquaero */ + if (priv->kind != aquaero) { + /* Init and xorout value for CRC-16/USB is 0xffff */ + checksum = crc16(0xffff, priv->buffer + priv->checksum_start, + priv->checksum_length); + checksum ^= 0xffff; - /* Place the new checksum at the end of the report */ - put_unaligned_be16(checksum, priv->buffer + priv->checksum_offset); + /* Place the new checksum at the end of the report */ + put_unaligned_be16(checksum, priv->buffer + priv->checksum_offset); + } /* Send the patched up report back to the device */ ret = hid_hw_raw_request(priv->hdev, priv->ctrl_report_id, priv->buffer, priv->buffer_size, @@ -1280,6 +1294,8 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id) priv->num_flow_sensors = AQUAERO_NUM_FLOW_SENSORS; priv->flow_sensors_start_offset = AQUAERO_FLOW_SENSORS_START; + priv->buffer_size = AQUAERO_CTRL_REPORT_SIZE; + priv->temp_label = label_temp_sensors; priv->virtual_temp_label = label_virtual_temp_sensors; priv->calc_virt_temp_label = label_aquaero_calc_temp_sensors; @@ -1443,6 +1459,11 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id) priv->firmware_version_offset = AQUAERO_FIRMWARE_VERSION; priv->fan_structure = &aqc_aquaero_fan_structure; + + priv->ctrl_report_id = AQUAERO_CTRL_REPORT_ID; + priv->secondary_ctrl_report_id = AQUAERO_SECONDARY_CTRL_REPORT_ID; + priv->secondary_ctrl_report_size = AQUAERO_SECONDARY_CTRL_REPORT_SIZE; + priv->secondary_ctrl_report = aquaero_secondary_ctrl_report; break; case poweradjust3: priv->status_report_id = POWERADJUST3_STATUS_REPORT_ID; |