diff options
Diffstat (limited to 'drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h')
-rw-r--r-- | drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h | 92 |
1 files changed, 85 insertions, 7 deletions
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h index db1c6904388b..b096e010d4ee 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h @@ -2,6 +2,10 @@ /* * Copyright (C) 2012 Invensense, Inc. */ + +#ifndef INV_MPU_IIO_H_ +#define INV_MPU_IIO_H_ + #include <linux/i2c.h> #include <linux/i2c-mux.h> #include <linux/mutex.h> @@ -82,6 +86,7 @@ enum inv_devices { * @accl_fs: accel full scale range. * @accl_fifo_enable: enable accel data output * @gyro_fifo_enable: enable gyro data output + * @magn_fifo_enable: enable magn data output * @divider: chip sample rate divider (sample rate divider - 1) */ struct inv_mpu6050_chip_config { @@ -90,6 +95,7 @@ struct inv_mpu6050_chip_config { unsigned int accl_fs:2; unsigned int accl_fifo_enable:1; unsigned int gyro_fifo_enable:1; + unsigned int magn_fifo_enable:1; u8 divider; u8 user_ctrl; }; @@ -100,12 +106,19 @@ struct inv_mpu6050_chip_config { * @name: name of the chip. * @reg: register map of the chip. * @config: configuration of the chip. + * @fifo_size: size of the FIFO in bytes. + * @temp: offset and scale to apply to raw temperature. */ struct inv_mpu6050_hw { u8 whoami; u8 *name; const struct inv_mpu6050_reg_map *reg; const struct inv_mpu6050_chip_config *config; + size_t fifo_size; + struct { + int offset; + int scale; + } temp; }; /* @@ -124,7 +137,11 @@ struct inv_mpu6050_hw { * @chip_period: chip internal period estimation (~1kHz). * @it_timestamp: timestamp from previous interrupt. * @data_timestamp: timestamp for next data sample. - * @vddio_supply voltage regulator for the chip. + * @vdd_supply: VDD voltage regulator for the chip. + * @vddio_supply I/O voltage regulator for the chip. + * @magn_disabled: magnetometer disabled for backward compatibility reason. + * @magn_raw_to_gauss: coefficient to convert mag raw value to Gauss. + * @magn_orient: magnetometer sensor chip orientation if available. */ struct inv_mpu6050_state { struct mutex lock; @@ -145,7 +162,11 @@ struct inv_mpu6050_state { s64 chip_period; s64 it_timestamp; s64 data_timestamp; + struct regulator *vdd_supply; struct regulator *vddio_supply; + bool magn_disabled; + s32 magn_raw_to_gauss[3]; + struct iio_mount_matrix magn_orient; }; /*register and associated bit definition*/ @@ -158,9 +179,41 @@ struct inv_mpu6050_state { #define INV_MPU6050_REG_ACCEL_CONFIG 0x1C #define INV_MPU6050_REG_FIFO_EN 0x23 +#define INV_MPU6050_BIT_SLAVE_0 0x01 +#define INV_MPU6050_BIT_SLAVE_1 0x02 +#define INV_MPU6050_BIT_SLAVE_2 0x04 #define INV_MPU6050_BIT_ACCEL_OUT 0x08 #define INV_MPU6050_BITS_GYRO_OUT 0x70 +#define INV_MPU6050_REG_I2C_MST_CTRL 0x24 +#define INV_MPU6050_BITS_I2C_MST_CLK_400KHZ 0x0D +#define INV_MPU6050_BIT_I2C_MST_P_NSR 0x10 +#define INV_MPU6050_BIT_SLV3_FIFO_EN 0x20 +#define INV_MPU6050_BIT_WAIT_FOR_ES 0x40 +#define INV_MPU6050_BIT_MULT_MST_EN 0x80 + +/* control I2C slaves from 0 to 3 */ +#define INV_MPU6050_REG_I2C_SLV_ADDR(_x) (0x25 + 3 * (_x)) +#define INV_MPU6050_BIT_I2C_SLV_RNW 0x80 + +#define INV_MPU6050_REG_I2C_SLV_REG(_x) (0x26 + 3 * (_x)) + +#define INV_MPU6050_REG_I2C_SLV_CTRL(_x) (0x27 + 3 * (_x)) +#define INV_MPU6050_BIT_SLV_GRP 0x10 +#define INV_MPU6050_BIT_SLV_REG_DIS 0x20 +#define INV_MPU6050_BIT_SLV_BYTE_SW 0x40 +#define INV_MPU6050_BIT_SLV_EN 0x80 + +/* I2C master delay register */ +#define INV_MPU6050_REG_I2C_SLV4_CTRL 0x34 +#define INV_MPU6050_BITS_I2C_MST_DLY(_x) ((_x) & 0x1F) + +#define INV_MPU6050_REG_I2C_MST_STATUS 0x36 +#define INV_MPU6050_BIT_I2C_SLV0_NACK 0x01 +#define INV_MPU6050_BIT_I2C_SLV1_NACK 0x02 +#define INV_MPU6050_BIT_I2C_SLV2_NACK 0x04 +#define INV_MPU6050_BIT_I2C_SLV3_NACK 0x08 + #define INV_MPU6050_REG_INT_ENABLE 0x38 #define INV_MPU6050_BIT_DATA_RDY_EN 0x01 #define INV_MPU6050_BIT_DMP_INT_EN 0x02 @@ -173,6 +226,18 @@ struct inv_mpu6050_state { #define INV_MPU6050_BIT_FIFO_OVERFLOW_INT 0x10 #define INV_MPU6050_BIT_RAW_DATA_RDY_INT 0x01 +#define INV_MPU6050_REG_EXT_SENS_DATA 0x49 + +/* I2C slaves data output from 0 to 3 */ +#define INV_MPU6050_REG_I2C_SLV_DO(_x) (0x63 + (_x)) + +#define INV_MPU6050_REG_I2C_MST_DELAY_CTRL 0x67 +#define INV_MPU6050_BIT_I2C_SLV0_DLY_EN 0x01 +#define INV_MPU6050_BIT_I2C_SLV1_DLY_EN 0x02 +#define INV_MPU6050_BIT_I2C_SLV2_DLY_EN 0x04 +#define INV_MPU6050_BIT_I2C_SLV3_DLY_EN 0x08 +#define INV_MPU6050_BIT_DELAY_ES_SHADOW 0x80 + #define INV_MPU6050_REG_USER_CTRL 0x6A #define INV_MPU6050_BIT_FIFO_RST 0x04 #define INV_MPU6050_BIT_DMP_RST 0x08 @@ -200,6 +265,9 @@ struct inv_mpu6050_state { #define INV_MPU6050_BYTES_PER_3AXIS_SENSOR 6 #define INV_MPU6050_FIFO_COUNT_BYTE 2 +/* MPU9X50 9-axis magnetometer */ +#define INV_MPU9X50_BYTES_MAGN 7 + /* ICM20602 FIFO samples include temperature readings */ #define INV_ICM20602_BYTES_PER_TEMP_SENSOR 2 @@ -216,19 +284,22 @@ struct inv_mpu6050_state { #define INV_MPU6050_REG_UP_TIME_MIN 5000 #define INV_MPU6050_REG_UP_TIME_MAX 10000 -#define INV_MPU6050_TEMP_OFFSET 12421 -#define INV_MPU6050_TEMP_SCALE 2941 +#define INV_MPU6050_TEMP_OFFSET 12420 +#define INV_MPU6050_TEMP_SCALE 2941176 #define INV_MPU6050_MAX_GYRO_FS_PARAM 3 #define INV_MPU6050_MAX_ACCL_FS_PARAM 3 #define INV_MPU6050_THREE_AXIS 3 #define INV_MPU6050_GYRO_CONFIG_FSR_SHIFT 3 #define INV_MPU6050_ACCL_CONFIG_FSR_SHIFT 3 -#define INV_ICM20602_TEMP_OFFSET 8170 -#define INV_ICM20602_TEMP_SCALE 3060 +#define INV_MPU6500_TEMP_OFFSET 7011 +#define INV_MPU6500_TEMP_SCALE 2995178 -/* 6 + 6 round up and plus 8 */ -#define INV_MPU6050_OUTPUT_DATA_SIZE 24 +#define INV_ICM20608_TEMP_OFFSET 8170 +#define INV_ICM20608_TEMP_SCALE 3059976 + +/* 6 + 6 + 7 (for MPU9x50) = 19 round up to 24 and plus 8 */ +#define INV_MPU6050_OUTPUT_DATA_SIZE 32 #define INV_MPU6050_REG_INT_PIN_CFG 0x37 #define INV_MPU6050_ACTIVE_HIGH 0x00 @@ -277,6 +348,11 @@ enum inv_mpu6050_scan { INV_MPU6050_SCAN_GYRO_Y, INV_MPU6050_SCAN_GYRO_Z, INV_MPU6050_SCAN_TIMESTAMP, + + INV_MPU9X50_SCAN_MAGN_X = INV_MPU6050_SCAN_GYRO_Z + 1, + INV_MPU9X50_SCAN_MAGN_Y, + INV_MPU9X50_SCAN_MAGN_Z, + INV_MPU9X50_SCAN_TIMESTAMP, }; /* scan element definition for ICM20602, which includes temperature */ @@ -342,3 +418,5 @@ void inv_mpu_acpi_delete_mux_client(struct i2c_client *client); int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name, int (*inv_mpu_bus_setup)(struct iio_dev *), int chip_type); extern const struct dev_pm_ops inv_mpu_pmops; + +#endif |