1 files changed, 211 insertions, 64 deletions

diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
index 0ffb1cf17e0b..9805d989dafd 100644
--- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
+++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
@@ -48,6 +48,9 @@ enum arm_smmu_msi_index {
 	ARM_SMMU_MAX_MSIS,
 };
 
+static void arm_smmu_sync_ste_for_sid(struct arm_smmu_device *smmu,
+				      ioasid_t sid);
+
 static phys_addr_t arm_smmu_msi_cfg[ARM_SMMU_MAX_MSIS][3] = {
 	[EVTQ_MSI_INDEX] = {
 		ARM_SMMU_EVTQ_IRQ_CFG0,
@@ -971,6 +974,199 @@ void arm_smmu_tlb_inv_asid(struct arm_smmu_device *smmu, u16 asid)
 	arm_smmu_cmdq_issue_cmd_with_sync(smmu, &cmd);
 }
 
+/*
+ * Based on the value of ent report which bits of the STE the HW will access. It
+ * would be nice if this was complete according to the spec, but minimally it
+ * has to capture the bits this driver uses.
+ */
+static void arm_smmu_get_ste_used(const struct arm_smmu_ste *ent,
+				  struct arm_smmu_ste *used_bits)
+{
+	unsigned int cfg = FIELD_GET(STRTAB_STE_0_CFG, le64_to_cpu(ent->data[0]));
+
+	used_bits->data[0] = cpu_to_le64(STRTAB_STE_0_V);
+	if (!(ent->data[0] & cpu_to_le64(STRTAB_STE_0_V)))
+		return;
+
+	used_bits->data[0] |= cpu_to_le64(STRTAB_STE_0_CFG);
+
+	/* S1 translates */
+	if (cfg & BIT(0)) {
+		used_bits->data[0] |= cpu_to_le64(STRTAB_STE_0_S1FMT |
+						  STRTAB_STE_0_S1CTXPTR_MASK |
+						  STRTAB_STE_0_S1CDMAX);
+		used_bits->data[1] |=
+			cpu_to_le64(STRTAB_STE_1_S1DSS | STRTAB_STE_1_S1CIR |
+				    STRTAB_STE_1_S1COR | STRTAB_STE_1_S1CSH |
+				    STRTAB_STE_1_S1STALLD | STRTAB_STE_1_STRW |
+				    STRTAB_STE_1_EATS);
+		used_bits->data[2] |= cpu_to_le64(STRTAB_STE_2_S2VMID);
+	}
+
+	/* S2 translates */
+	if (cfg & BIT(1)) {
+		used_bits->data[1] |=
+			cpu_to_le64(STRTAB_STE_1_EATS | STRTAB_STE_1_SHCFG);
+		used_bits->data[2] |=
+			cpu_to_le64(STRTAB_STE_2_S2VMID | STRTAB_STE_2_VTCR |
+				    STRTAB_STE_2_S2AA64 | STRTAB_STE_2_S2ENDI |
+				    STRTAB_STE_2_S2PTW | STRTAB_STE_2_S2R);
+		used_bits->data[3] |= cpu_to_le64(STRTAB_STE_3_S2TTB_MASK);
+	}
+
+	if (cfg == STRTAB_STE_0_CFG_BYPASS)
+		used_bits->data[1] |= cpu_to_le64(STRTAB_STE_1_SHCFG);
+}
+
+/*
+ * Figure out if we can do a hitless update of entry to become target. Returns a
+ * bit mask where 1 indicates that qword needs to be set disruptively.
+ * unused_update is an intermediate value of entry that has unused bits set to
+ * their new values.
+ */
+static u8 arm_smmu_entry_qword_diff(const struct arm_smmu_ste *entry,
+				    const struct arm_smmu_ste *target,
+				    struct arm_smmu_ste *unused_update)
+{
+	struct arm_smmu_ste target_used = {};
+	struct arm_smmu_ste cur_used = {};
+	u8 used_qword_diff = 0;
+	unsigned int i;
+
+	arm_smmu_get_ste_used(entry, &cur_used);
+	arm_smmu_get_ste_used(target, &target_used);
+
+	for (i = 0; i != ARRAY_SIZE(target_used.data); i++) {
+		/*
+		 * Check that masks are up to date, the make functions are not
+		 * allowed to set a bit to 1 if the used function doesn't say it
+		 * is used.
+		 */
+		WARN_ON_ONCE(target->data[i] & ~target_used.data[i]);
+
+		/* Bits can change because they are not currently being used */
+		unused_update->data[i] = (entry->data[i] & cur_used.data[i]) |
+					 (target->data[i] & ~cur_used.data[i]);
+		/*
+		 * Each bit indicates that a used bit in a qword needs to be
+		 * changed after unused_update is applied.
+		 */
+		if ((unused_update->data[i] & target_used.data[i]) !=
+		    target->data[i])
+			used_qword_diff |= 1 << i;
+	}
+	return used_qword_diff;
+}
+
+static bool entry_set(struct arm_smmu_device *smmu, ioasid_t sid,
+		      struct arm_smmu_ste *entry,
+		      const struct arm_smmu_ste *target, unsigned int start,
+		      unsigned int len)
+{
+	bool changed = false;
+	unsigned int i;
+
+	for (i = start; len != 0; len--, i++) {
+		if (entry->data[i] != target->data[i]) {
+			WRITE_ONCE(entry->data[i], target->data[i]);
+			changed = true;
+		}
+	}
+
+	if (changed)
+		arm_smmu_sync_ste_for_sid(smmu, sid);
+	return changed;
+}
+
+/*
+ * Update the STE/CD to the target configuration. The transition from the
+ * current entry to the target entry takes place over multiple steps that
+ * attempts to make the transition hitless if possible. This function takes care
+ * not to create a situation where the HW can perceive a corrupted entry. HW is
+ * only required to have a 64 bit atomicity with stores from the CPU, while
+ * entries are many 64 bit values big.
+ *
+ * The difference between the current value and the target value is analyzed to
+ * determine which of three updates are required - disruptive, hitless or no
+ * change.
+ *
+ * In the most general disruptive case we can make any update in three steps:
+ *  - Disrupting the entry (V=0)
+ *  - Fill now unused qwords, execpt qword 0 which contains V
+ *  - Make qword 0 have the final value and valid (V=1) with a single 64
+ *    bit store
+ *
+ * However this disrupts the HW while it is happening. There are several
+ * interesting cases where a STE/CD can be updated without disturbing the HW
+ * because only a small number of bits are changing (S1DSS, CONFIG, etc) or
+ * because the used bits don't intersect. We can detect this by calculating how
+ * many 64 bit values need update after adjusting the unused bits and skip the
+ * V=0 process. This relies on the IGNORED behavior described in the
+ * specification.
+ */
+static void arm_smmu_write_ste(struct arm_smmu_master *master, u32 sid,
+			       struct arm_smmu_ste *entry,
+			       const struct arm_smmu_ste *target)
+{
+	unsigned int num_entry_qwords = ARRAY_SIZE(target->data);
+	struct arm_smmu_device *smmu = master->smmu;
+	struct arm_smmu_ste unused_update;
+	u8 used_qword_diff;
+
+	used_qword_diff =
+		arm_smmu_entry_qword_diff(entry, target, &unused_update);
+	if (hweight8(used_qword_diff) == 1) {
+		/*
+		 * Only one qword needs its used bits to be changed. This is a
+		 * hitless update, update all bits the current STE is ignoring
+		 * to their new values, then update a single "critical qword" to
+		 * change the STE and finally 0 out any bits that are now unused
+		 * in the target configuration.
+		 */
+		unsigned int critical_qword_index = ffs(used_qword_diff) - 1;
+
+		/*
+		 * Skip writing unused bits in the critical qword since we'll be
+		 * writing it in the next step anyways. This can save a sync
+		 * when the only change is in that qword.
+		 */
+		unused_update.data[critical_qword_index] =
+			entry->data[critical_qword_index];
+		entry_set(smmu, sid, entry, &unused_update, 0, num_entry_qwords);
+		entry_set(smmu, sid, entry, target, critical_qword_index, 1);
+		entry_set(smmu, sid, entry, target, 0, num_entry_qwords);
+	} else if (used_qword_diff) {
+		/*
+		 * At least two qwords need their inuse bits to be changed. This
+		 * requires a breaking update, zero the V bit, write all qwords
+		 * but 0, then set qword 0
+		 */
+		unused_update.data[0] = entry->data[0] & (~STRTAB_STE_0_V);
+		entry_set(smmu, sid, entry, &unused_update, 0, 1);
+		entry_set(smmu, sid, entry, target, 1, num_entry_qwords - 1);
+		entry_set(smmu, sid, entry, target, 0, 1);
+	} else {
+		/*
+		 * No inuse bit changed. Sanity check that all unused bits are 0
+		 * in the entry. The target was already sanity checked by
+		 * compute_qword_diff().
+		 */
+		WARN_ON_ONCE(
+			entry_set(smmu, sid, entry, target, 0, num_entry_qwords));
+	}
+
+	/* It's likely that we'll want to use the new STE soon */
+	if (!(smmu->options & ARM_SMMU_OPT_SKIP_PREFETCH)) {
+		struct arm_smmu_cmdq_ent
+			prefetch_cmd = { .opcode = CMDQ_OP_PREFETCH_CFG,
+					 .prefetch = {
+						 .sid = sid,
+					 } };
+
+		arm_smmu_cmdq_issue_cmd(smmu, &prefetch_cmd);
+	}
+}
+
 static void arm_smmu_sync_cd(struct arm_smmu_master *master,
 			     int ssid, bool leaf)
 {
@@ -1254,34 +1450,12 @@ static void arm_smmu_sync_ste_for_sid(struct arm_smmu_device *smmu, u32 sid)
 static void arm_smmu_write_strtab_ent(struct arm_smmu_master *master, u32 sid,
 				      struct arm_smmu_ste *dst)
 {
-	/*
-	 * This is hideously complicated, but we only really care about
-	 * three cases at the moment:
-	 *
-	 * 1. Invalid (all zero) -> bypass/fault (init)
-	 * 2. Bypass/fault -> translation/bypass (attach)
-	 * 3. Translation/bypass -> bypass/fault (detach)
-	 *
-	 * Given that we can't update the STE atomically and the SMMU
-	 * doesn't read the thing in a defined order, that leaves us
-	 * with the following maintenance requirements:
-	 *
-	 * 1. Update Config, return (init time STEs aren't live)
-	 * 2. Write everything apart from dword 0, sync, write dword 0, sync
-	 * 3. Update Config, sync
-	 */
-	u64 val = le64_to_cpu(dst->data[0]);
-	bool ste_live = false;
+	u64 val;
 	struct arm_smmu_device *smmu = master->smmu;
 	struct arm_smmu_ctx_desc_cfg *cd_table = NULL;
 	struct arm_smmu_s2_cfg *s2_cfg = NULL;
 	struct arm_smmu_domain *smmu_domain = master->domain;
-	struct arm_smmu_cmdq_ent prefetch_cmd = {
-		.opcode		= CMDQ_OP_PREFETCH_CFG,
-		.prefetch	= {
-			.sid	= sid,
-		},
-	};
+	struct arm_smmu_ste target = {};
 
 	if (smmu_domain) {
 		switch (smmu_domain->stage) {
@@ -1296,22 +1470,6 @@ static void arm_smmu_write_strtab_ent(struct arm_smmu_master *master, u32 sid,
 		}
 	}
 
-	if (val & STRTAB_STE_0_V) {
-		switch (FIELD_GET(STRTAB_STE_0_CFG, val)) {
-		case STRTAB_STE_0_CFG_BYPASS:
-			break;
-		case STRTAB_STE_0_CFG_S1_TRANS:
-		case STRTAB_STE_0_CFG_S2_TRANS:
-			ste_live = true;
-			break;
-		case STRTAB_STE_0_CFG_ABORT:
-			BUG_ON(!disable_bypass);
-			break;
-		default:
-			BUG(); /* STE corruption */
-		}
-	}
-
 	/* Nuke the existing STE_0 value, as we're going to rewrite it */
 	val = STRTAB_STE_0_V;
 
@@ -1322,16 +1480,11 @@ static void arm_smmu_write_strtab_ent(struct arm_smmu_master *master, u32 sid,
 		else
 			val |= FIELD_PREP(STRTAB_STE_0_CFG, STRTAB_STE_0_CFG_BYPASS);
 
-		dst->data[0] = cpu_to_le64(val);
-		dst->data[1] = cpu_to_le64(FIELD_PREP(STRTAB_STE_1_SHCFG,
+		target.data[0] = cpu_to_le64(val);
+		target.data[1] = cpu_to_le64(FIELD_PREP(STRTAB_STE_1_SHCFG,
 						STRTAB_STE_1_SHCFG_INCOMING));
-		dst->data[2] = 0; /* Nuke the VMID */
-		/*
-		 * The SMMU can perform negative caching, so we must sync
-		 * the STE regardless of whether the old value was live.
-		 */
-		if (smmu)
-			arm_smmu_sync_ste_for_sid(smmu, sid);
+		target.data[2] = 0; /* Nuke the VMID */
+		arm_smmu_write_ste(master, sid, dst, &target);
 		return;
 	}
 
@@ -1339,8 +1492,7 @@ static void arm_smmu_write_strtab_ent(struct arm_smmu_master *master, u32 sid,
 		u64 strw = smmu->features & ARM_SMMU_FEAT_E2H ?
 			STRTAB_STE_1_STRW_EL2 : STRTAB_STE_1_STRW_NSEL1;
 
-		BUG_ON(ste_live);
-		dst->data[1] = cpu_to_le64(
+		target.data[1] = cpu_to_le64(
 			 FIELD_PREP(STRTAB_STE_1_S1DSS, STRTAB_STE_1_S1DSS_SSID0) |
 			 FIELD_PREP(STRTAB_STE_1_S1CIR, STRTAB_STE_1_S1C_CACHE_WBRA) |
 			 FIELD_PREP(STRTAB_STE_1_S1COR, STRTAB_STE_1_S1C_CACHE_WBRA) |
@@ -1349,7 +1501,7 @@ static void arm_smmu_write_strtab_ent(struct arm_smmu_master *master, u32 sid,
 
 		if (smmu->features & ARM_SMMU_FEAT_STALLS &&
 		    !master->stall_enabled)
-			dst->data[1] |= cpu_to_le64(STRTAB_STE_1_S1STALLD);
+			target.data[1] |= cpu_to_le64(STRTAB_STE_1_S1STALLD);
 
 		val |= (cd_table->cdtab_dma & STRTAB_STE_0_S1CTXPTR_MASK) |
 			FIELD_PREP(STRTAB_STE_0_CFG, STRTAB_STE_0_CFG_S1_TRANS) |
@@ -1358,8 +1510,9 @@ static void arm_smmu_write_strtab_ent(struct arm_smmu_master *master, u32 sid,
 	}
 
 	if (s2_cfg) {
-		BUG_ON(ste_live);
-		dst->data[2] = cpu_to_le64(
+		target.data[1] = cpu_to_le64(FIELD_PREP(STRTAB_STE_1_SHCFG,
+						STRTAB_STE_1_SHCFG_INCOMING));
+		target.data[2] = cpu_to_le64(
 			 FIELD_PREP(STRTAB_STE_2_S2VMID, s2_cfg->vmid) |
 			 FIELD_PREP(STRTAB_STE_2_VTCR, s2_cfg->vtcr) |
 #ifdef __BIG_ENDIAN
@@ -1368,23 +1521,17 @@ static void arm_smmu_write_strtab_ent(struct arm_smmu_master *master, u32 sid,
 			 STRTAB_STE_2_S2PTW | STRTAB_STE_2_S2AA64 |
 			 STRTAB_STE_2_S2R);
 
-		dst->data[3] = cpu_to_le64(s2_cfg->vttbr & STRTAB_STE_3_S2TTB_MASK);
+		target.data[3] = cpu_to_le64(s2_cfg->vttbr & STRTAB_STE_3_S2TTB_MASK);
 
 		val |= FIELD_PREP(STRTAB_STE_0_CFG, STRTAB_STE_0_CFG_S2_TRANS);
 	}
 
 	if (master->ats_enabled)
-		dst->data[1] |= cpu_to_le64(FIELD_PREP(STRTAB_STE_1_EATS,
+		target.data[1] |= cpu_to_le64(FIELD_PREP(STRTAB_STE_1_EATS,
 						 STRTAB_STE_1_EATS_TRANS));
 
-	arm_smmu_sync_ste_for_sid(smmu, sid);
-	/* See comment in arm_smmu_write_ctx_desc() */
-	WRITE_ONCE(dst->data[0], cpu_to_le64(val));
-	arm_smmu_sync_ste_for_sid(smmu, sid);
-
-	/* It's likely that we'll want to use the new STE soon */
-	if (!(smmu->options & ARM_SMMU_OPT_SKIP_PREFETCH))
-		arm_smmu_cmdq_issue_cmd(smmu, &prefetch_cmd);
+	target.data[0] = cpu_to_le64(val);
+	arm_smmu_write_ste(master, sid, dst, &target);
 }
 
 static void arm_smmu_init_bypass_stes(struct arm_smmu_ste *strtab,