diff options
Diffstat (limited to 'drivers/net/e100.c')
| -rw-r--r-- | drivers/net/e100.c | 32 |
1 files changed, 29 insertions, 3 deletions
diff --git a/drivers/net/e100.c b/drivers/net/e100.c index 22cd04556707..23de22631c64 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -132,6 +132,10 @@ * TODO: * o several entry points race with dev->close * o check for tx-no-resources/stop Q races with tx clean/wake Q + * + * FIXES: + * 2005/12/02 - Michael O'Donnell <Michael.ODonnell at stratus dot com> + * - Stratus87247: protect MDI control register manipulations */ #include <linux/config.h> @@ -578,6 +582,7 @@ struct nic { u16 leds; u16 eeprom_wc; u16 eeprom[256]; + spinlock_t mdio_lock; }; static inline void e100_write_flush(struct nic *nic) @@ -876,15 +881,35 @@ static u16 mdio_ctrl(struct nic *nic, u32 addr, u32 dir, u32 reg, u16 data) { u32 data_out = 0; unsigned int i; + unsigned long flags; + + /* + * Stratus87247: we shouldn't be writing the MDI control + * register until the Ready bit shows True. Also, since + * manipulation of the MDI control registers is a multi-step + * procedure it should be done under lock. + */ + spin_lock_irqsave(&nic->mdio_lock, flags); + for (i = 100; i; --i) { + if (readl(&nic->csr->mdi_ctrl) & mdi_ready) + break; + udelay(20); + } + if (unlikely(!i)) { + printk("e100.mdio_ctrl(%s) won't go Ready\n", + nic->netdev->name ); + spin_unlock_irqrestore(&nic->mdio_lock, flags); + return 0; /* No way to indicate timeout error */ + } writel((reg << 16) | (addr << 21) | dir | data, &nic->csr->mdi_ctrl); - for(i = 0; i < 100; i++) { + for (i = 0; i < 100; i++) { udelay(20); - if((data_out = readl(&nic->csr->mdi_ctrl)) & mdi_ready) + if ((data_out = readl(&nic->csr->mdi_ctrl)) & mdi_ready) break; } - + spin_unlock_irqrestore(&nic->mdio_lock, flags); DPRINTK(HW, DEBUG, "%s:addr=%d, reg=%d, data_in=0x%04X, data_out=0x%04X\n", dir == mdi_read ? "READ" : "WRITE", addr, reg, data, data_out); @@ -2562,6 +2587,7 @@ static int __devinit e100_probe(struct pci_dev *pdev, /* locks must be initialized before calling hw_reset */ spin_lock_init(&nic->cb_lock); spin_lock_init(&nic->cmd_lock); + spin_lock_init(&nic->mdio_lock); /* Reset the device before pci_set_master() in case device is in some * funky state and has an interrupt pending - hint: we don't have the |