diff options
Diffstat (limited to 'drivers/net/ethernet/neterion/s2io.c')
| -rw-r--r-- | drivers/net/ethernet/neterion/s2io.c | 10 |
1 files changed, 5 insertions, 5 deletions
diff --git a/drivers/net/ethernet/neterion/s2io.c b/drivers/net/ethernet/neterion/s2io.c index 6dd451adc331..30f955efa830 100644 --- a/drivers/net/ethernet/neterion/s2io.c +++ b/drivers/net/ethernet/neterion/s2io.c @@ -2156,7 +2156,7 @@ static int verify_xena_quiescence(struct s2io_nic *sp) /* * In PCI 33 mode, the P_PLL is not used, and therefore, - * the the P_PLL_LOCK bit in the adapter_status register will + * the P_PLL_LOCK bit in the adapter_status register will * not be asserted. */ if (!(val64 & ADAPTER_STATUS_P_PLL_LOCK) && @@ -3817,7 +3817,7 @@ static irqreturn_t s2io_test_intr(int irq, void *dev_id) return IRQ_HANDLED; } -/* Test interrupt path by forcing a a software IRQ */ +/* Test interrupt path by forcing a software IRQ */ static int s2io_test_msi(struct s2io_nic *sp) { struct pci_dev *pdev = sp->pdev; @@ -5492,7 +5492,7 @@ s2io_ethtool_gringparam(struct net_device *dev, } /** - * s2io_ethtool_getpause_data -Pause frame frame generation and reception. + * s2io_ethtool_getpause_data -Pause frame generation and reception. * @dev: pointer to netdev * @ep : pointer to the structure with pause parameters given by ethtool. * Description: @@ -7449,7 +7449,7 @@ aggregate: * @link : inidicates whether link is UP/DOWN. * Description: * This function stops/starts the Tx queue depending on whether the link - * status of the NIC is is down or up. This is called by the Alarm + * status of the NIC is down or up. This is called by the Alarm * interrupt handler whenever a link change interrupt comes up. * Return value: * void. @@ -7732,7 +7732,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) * Setting the device configuration parameters. * Most of these parameters can be specified by the user during * module insertion as they are module loadable parameters. If - * these parameters are not not specified during load time, they + * these parameters are not specified during load time, they * are initialized with default values. */ config = &sp->config; |