1 files changed, 242 insertions, 82 deletions

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index b4978c5fb2ca..1b9523595839 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -9,28 +9,29 @@
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/unistd.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
+#include <linux/bitmap.h>
 #include <linux/delay.h>
-#include <linux/netdevice.h>
+#include <linux/errno.h>
 #include <linux/etherdevice.h>
-#include <linux/skbuff.h>
+#include <linux/ethtool.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mdio.h>
+#include <linux/mii.h>
 #include <linux/mm.h>
 #include <linux/module.h>
-#include <linux/mii.h>
-#include <linux/ethtool.h>
-#include <linux/bitmap.h>
+#include <linux/netdevice.h>
 #include <linux/phy.h>
 #include <linux/phy_led_triggers.h>
+#include <linux/property.h>
 #include <linux/sfp.h>
-#include <linux/mdio.h>
-#include <linux/io.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
+#include <linux/string.h>
 #include <linux/uaccess.h>
+#include <linux/unistd.h>
 
 MODULE_DESCRIPTION("PHY library");
 MODULE_AUTHOR("Andy Fleming");
@@ -105,10 +106,9 @@ const int phy_10gbit_features_array[1] = {
 };
 EXPORT_SYMBOL_GPL(phy_10gbit_features_array);
 
-const int phy_10gbit_fec_features_array[1] = {
+static const int phy_10gbit_fec_features_array[1] = {
 	ETHTOOL_LINK_MODE_10000baseR_FEC_BIT,
 };
-EXPORT_SYMBOL_GPL(phy_10gbit_fec_features_array);
 
 __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_10gbit_full_features) __ro_after_init;
 EXPORT_SYMBOL_GPL(phy_10gbit_full_features);
@@ -226,7 +226,6 @@ static void phy_mdio_device_remove(struct mdio_device *mdiodev)
 }
 
 static struct phy_driver genphy_driver;
-extern struct phy_driver genphy_c45_driver;
 
 static LIST_HEAD(phy_fixup_list);
 static DEFINE_MUTEX(phy_fixup_lock);
@@ -661,6 +660,28 @@ struct phy_device *phy_device_create(struct mii_bus *bus, int addr, u32 phy_id,
 }
 EXPORT_SYMBOL(phy_device_create);
 
+/* phy_c45_probe_present - checks to see if a MMD is present in the package
+ * @bus: the target MII bus
+ * @prtad: PHY package address on the MII bus
+ * @devad: PHY device (MMD) address
+ *
+ * Read the MDIO_STAT2 register, and check whether a device is responding
+ * at this address.
+ *
+ * Returns: negative error number on bus access error, zero if no device
+ * is responding, or positive if a device is present.
+ */
+static int phy_c45_probe_present(struct mii_bus *bus, int prtad, int devad)
+{
+	int stat2;
+
+	stat2 = mdiobus_c45_read(bus, prtad, devad, MDIO_STAT2);
+	if (stat2 < 0)
+		return stat2;
+
+	return (stat2 & MDIO_STAT2_DEVPRST) == MDIO_STAT2_DEVPRST_VAL;
+}
+
 /* get_phy_c45_devs_in_pkg - reads a MMD's devices in package registers.
  * @bus: the target MII bus
  * @addr: PHY address on the MII bus
@@ -687,9 +708,6 @@ static int get_phy_c45_devs_in_pkg(struct mii_bus *bus, int addr, int dev_addr,
 		return -EIO;
 	*devices_in_package |= phy_reg;
 
-	/* Bit 0 doesn't represent a device, it indicates c22 regs presence */
-	*devices_in_package &= ~BIT(0);
-
 	return 0;
 }
 
@@ -697,54 +715,78 @@ static int get_phy_c45_devs_in_pkg(struct mii_bus *bus, int addr, int dev_addr,
  * get_phy_c45_ids - reads the specified addr for its 802.3-c45 IDs.
  * @bus: the target MII bus
  * @addr: PHY address on the MII bus
- * @phy_id: where to store the ID retrieved.
  * @c45_ids: where to store the c45 ID information.
  *
- *   If the PHY devices-in-package appears to be valid, it and the
- *   corresponding identifiers are stored in @c45_ids, zero is stored
- *   in @phy_id.  Otherwise 0xffffffff is stored in @phy_id.  Returns
- *   zero on success.
+ * Read the PHY "devices in package". If this appears to be valid, read
+ * the PHY identifiers for each device. Return the "devices in package"
+ * and identifiers in @c45_ids.
  *
+ * Returns zero on success, %-EIO on bus access error, or %-ENODEV if
+ * the "devices in package" is invalid.
  */
-static int get_phy_c45_ids(struct mii_bus *bus, int addr, u32 *phy_id,
+static int get_phy_c45_ids(struct mii_bus *bus, int addr,
 			   struct phy_c45_device_ids *c45_ids)
 {
 	const int num_ids = ARRAY_SIZE(c45_ids->device_ids);
-	u32 *devs = &c45_ids->devices_in_package;
-	int i, phy_reg;
+	u32 devs_in_pkg = 0;
+	int i, ret, phy_reg;
 
 	/* Find first non-zero Devices In package. Device zero is reserved
 	 * for 802.3 c45 complied PHYs, so don't probe it at first.
 	 */
-	for (i = 1; i < num_ids && *devs == 0; i++) {
-		phy_reg = get_phy_c45_devs_in_pkg(bus, addr, i, devs);
-		if (phy_reg < 0)
-			return -EIO;
-
-		if ((*devs & 0x1fffffff) == 0x1fffffff) {
-			/*  If mostly Fs, there is no device there,
-			 *  then let's continue to probe more, as some
-			 *  10G PHYs have zero Devices In package,
-			 *  e.g. Cortina CS4315/CS4340 PHY.
+	for (i = 1; i < MDIO_MMD_NUM && (devs_in_pkg == 0 ||
+	     (devs_in_pkg & 0x1fffffff) == 0x1fffffff); i++) {
+		if (i == MDIO_MMD_VEND1 || i == MDIO_MMD_VEND2) {
+			/* Check that there is a device present at this
+			 * address before reading the devices-in-package
+			 * register to avoid reading garbage from the PHY.
+			 * Some PHYs (88x3310) vendor space is not IEEE802.3
+			 * compliant.
 			 */
-			phy_reg = get_phy_c45_devs_in_pkg(bus, addr, 0, devs);
-			if (phy_reg < 0)
+			ret = phy_c45_probe_present(bus, addr, i);
+			if (ret < 0)
 				return -EIO;
-			/* no device there, let's get out of here */
-			if ((*devs & 0x1fffffff) == 0x1fffffff) {
-				*phy_id = 0xffffffff;
-				return 0;
-			} else {
-				break;
-			}
+
+			if (!ret)
+				continue;
 		}
+		phy_reg = get_phy_c45_devs_in_pkg(bus, addr, i, &devs_in_pkg);
+		if (phy_reg < 0)
+			return -EIO;
+	}
+
+	if ((devs_in_pkg & 0x1fffffff) == 0x1fffffff) {
+		/* If mostly Fs, there is no device there, then let's probe
+		 * MMD 0, as some 10G PHYs have zero Devices In package,
+		 * e.g. Cortina CS4315/CS4340 PHY.
+		 */
+		phy_reg = get_phy_c45_devs_in_pkg(bus, addr, 0, &devs_in_pkg);
+		if (phy_reg < 0)
+			return -EIO;
+
+		/* no device there, let's get out of here */
+		if ((devs_in_pkg & 0x1fffffff) == 0x1fffffff)
+			return -ENODEV;
 	}
 
 	/* Now probe Device Identifiers for each device present. */
 	for (i = 1; i < num_ids; i++) {
-		if (!(c45_ids->devices_in_package & (1 << i)))
+		if (!(devs_in_pkg & (1 << i)))
 			continue;
 
+		if (i == MDIO_MMD_VEND1 || i == MDIO_MMD_VEND2) {
+			/* Probe the "Device Present" bits for the vendor MMDs
+			 * to ignore these if they do not contain IEEE 802.3
+			 * registers.
+			 */
+			ret = phy_c45_probe_present(bus, addr, i);
+			if (ret < 0)
+				return ret;
+
+			if (!ret)
+				continue;
+		}
+
 		phy_reg = mdiobus_c45_read(bus, addr, i, MII_PHYSID1);
 		if (phy_reg < 0)
 			return -EIO;
@@ -755,34 +797,29 @@ static int get_phy_c45_ids(struct mii_bus *bus, int addr, u32 *phy_id,
 			return -EIO;
 		c45_ids->device_ids[i] |= phy_reg;
 	}
-	*phy_id = 0;
+
+	c45_ids->devices_in_package = devs_in_pkg;
+	/* Bit 0 doesn't represent a device, it indicates c22 regs presence */
+	c45_ids->mmds_present = devs_in_pkg & ~BIT(0);
+
 	return 0;
 }
 
 /**
- * get_phy_id - reads the specified addr for its ID.
+ * get_phy_c22_id - reads the specified addr for its clause 22 ID.
  * @bus: the target MII bus
  * @addr: PHY address on the MII bus
  * @phy_id: where to store the ID retrieved.
- * @is_c45: If true the PHY uses the 802.3 clause 45 protocol
- * @c45_ids: where to store the c45 ID information.
- *
- * Description: In the case of a 802.3-c22 PHY, reads the ID registers
- *   of the PHY at @addr on the @bus, stores it in @phy_id and returns
- *   zero on success.
- *
- *   In the case of a 802.3-c45 PHY, get_phy_c45_ids() is invoked, and
- *   its return value is in turn returned.
  *
+ * Read the 802.3 clause 22 PHY ID from the PHY at @addr on the @bus,
+ * placing it in @phy_id. Return zero on successful read and the ID is
+ * valid, %-EIO on bus access error, or %-ENODEV if no device responds
+ * or invalid ID.
  */
-static int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id,
-		      bool is_c45, struct phy_c45_device_ids *c45_ids)
+static int get_phy_c22_id(struct mii_bus *bus, int addr, u32 *phy_id)
 {
 	int phy_reg;
 
-	if (is_c45)
-		return get_phy_c45_ids(bus, addr, phy_id, c45_ids);
-
 	/* Grab the bits from PHYIR1, and put them in the upper half */
 	phy_reg = mdiobus_read(bus, addr, MII_PHYSID1);
 	if (phy_reg < 0) {
@@ -801,6 +838,10 @@ static int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id,
 
 	*phy_id |= phy_reg;
 
+	/* If the phy_id is mostly Fs, there is no device there */
+	if ((*phy_id & 0x1fffffff) == 0x1fffffff)
+		return -ENODEV;
+
 	return 0;
 }
 
@@ -811,8 +852,17 @@ static int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id,
  * @addr: PHY address on the MII bus
  * @is_c45: If true the PHY uses the 802.3 clause 45 protocol
  *
- * Description: Reads the ID registers of the PHY at @addr on the
- *   @bus, then allocates and returns the phy_device to represent it.
+ * Probe for a PHY at @addr on @bus.
+ *
+ * When probing for a clause 22 PHY, then read the ID registers. If we find
+ * a valid ID, allocate and return a &struct phy_device.
+ *
+ * When probing for a clause 45 PHY, read the "devices in package" registers.
+ * If the "devices in package" appears valid, read the ID registers for each
+ * MMD, allocate and return a &struct phy_device.
+ *
+ * Returns an allocated &struct phy_device on success, %-ENODEV if there is
+ * no PHY present, or %-EIO on bus access error.
  */
 struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45)
 {
@@ -821,16 +871,17 @@ struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45)
 	int r;
 
 	c45_ids.devices_in_package = 0;
+	c45_ids.mmds_present = 0;
 	memset(c45_ids.device_ids, 0xff, sizeof(c45_ids.device_ids));
 
-	r = get_phy_id(bus, addr, &phy_id, is_c45, &c45_ids);
+	if (is_c45)
+		r = get_phy_c45_ids(bus, addr, &c45_ids);
+	else
+		r = get_phy_c22_id(bus, addr, &phy_id);
+
 	if (r)
 		return ERR_PTR(r);
 
-	/* If the phy_id is mostly Fs, there is no device there */
-	if ((phy_id & 0x1fffffff) == 0x1fffffff)
-		return ERR_PTR(-ENODEV);
-
 	return phy_device_create(bus, addr, phy_id, is_c45, &c45_ids);
 }
 EXPORT_SYMBOL(get_phy_device);
@@ -2663,6 +2714,104 @@ void phy_get_pause(struct phy_device *phydev, bool *tx_pause, bool *rx_pause)
 }
 EXPORT_SYMBOL(phy_get_pause);
 
+#if IS_ENABLED(CONFIG_OF_MDIO)
+static int phy_get_int_delay_property(struct device *dev, const char *name)
+{
+	s32 int_delay;
+	int ret;
+
+	ret = device_property_read_u32(dev, name, &int_delay);
+	if (ret)
+		return ret;
+
+	return int_delay;
+}
+#else
+static int phy_get_int_delay_property(struct device *dev, const char *name)
+{
+	return -EINVAL;
+}
+#endif
+
+/**
+ * phy_get_delay_index - returns the index of the internal delay
+ * @phydev: phy_device struct
+ * @dev: pointer to the devices device struct
+ * @delay_values: array of delays the PHY supports
+ * @size: the size of the delay array
+ * @is_rx: boolean to indicate to get the rx internal delay
+ *
+ * Returns the index within the array of internal delay passed in.
+ * If the device property is not present then the interface type is checked
+ * if the interface defines use of internal delay then a 1 is returned otherwise
+ * a 0 is returned.
+ * The array must be in ascending order. If PHY does not have an ascending order
+ * array then size = 0 and the value of the delay property is returned.
+ * Return -EINVAL if the delay is invalid or cannot be found.
+ */
+s32 phy_get_internal_delay(struct phy_device *phydev, struct device *dev,
+			   const int *delay_values, int size, bool is_rx)
+{
+	s32 delay;
+	int i;
+
+	if (is_rx) {
+		delay = phy_get_int_delay_property(dev, "rx-internal-delay-ps");
+		if (delay < 0 && size == 0) {
+			if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+			    phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
+				return 1;
+			else
+				return 0;
+		}
+
+	} else {
+		delay = phy_get_int_delay_property(dev, "tx-internal-delay-ps");
+		if (delay < 0 && size == 0) {
+			if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+			    phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
+				return 1;
+			else
+				return 0;
+		}
+	}
+
+	if (delay < 0)
+		return delay;
+
+	if (delay && size == 0)
+		return delay;
+
+	if (delay < delay_values[0] || delay > delay_values[size - 1]) {
+		phydev_err(phydev, "Delay %d is out of range\n", delay);
+		return -EINVAL;
+	}
+
+	if (delay == delay_values[0])
+		return 0;
+
+	for (i = 1; i < size; i++) {
+		if (delay == delay_values[i])
+			return i;
+
+		/* Find an approximate index by looking up the table */
+		if (delay > delay_values[i - 1] &&
+		    delay < delay_values[i]) {
+			if (delay - delay_values[i - 1] <
+			    delay_values[i] - delay)
+				return i - 1;
+			else
+				return i;
+		}
+	}
+
+	phydev_err(phydev, "error finding internal delay index for %d\n",
+		   delay);
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL(phy_get_internal_delay);
+
 static bool phy_drv_supports_irq(struct phy_driver *phydrv)
 {
 	return phydrv->config_intr && phydrv->ack_interrupt;
@@ -2696,16 +2845,13 @@ static int phy_probe(struct device *dev)
 
 	mutex_lock(&phydev->lock);
 
-	if (phydev->drv->probe) {
-		/* Deassert the reset signal */
-		phy_device_reset(phydev, 0);
+	/* Deassert the reset signal */
+	phy_device_reset(phydev, 0);
 
+	if (phydev->drv->probe) {
 		err = phydev->drv->probe(phydev);
-		if (err) {
-			/* Assert the reset signal */
-			phy_device_reset(phydev, 1);
+		if (err)
 			goto out;
-		}
 	}
 
 	/* Start out supporting everything. Eventually,
@@ -2767,6 +2913,10 @@ static int phy_probe(struct device *dev)
 	phydev->state = PHY_READY;
 
 out:
+	/* Assert the reset signal */
+	if (err)
+		phy_device_reset(phydev, 1);
+
 	mutex_unlock(&phydev->lock);
 
 	return err;
@@ -2785,12 +2935,12 @@ static int phy_remove(struct device *dev)
 	sfp_bus_del_upstream(phydev->sfp_bus);
 	phydev->sfp_bus = NULL;
 
-	if (phydev->drv && phydev->drv->remove) {
+	if (phydev->drv && phydev->drv->remove)
 		phydev->drv->remove(phydev);
 
-		/* Assert the reset signal */
-		phy_device_reset(phydev, 1);
-	}
+	/* Assert the reset signal */
+	phy_device_reset(phydev, 1);
+
 	phydev->drv = NULL;
 
 	return 0;
@@ -2878,6 +3028,14 @@ static struct phy_driver genphy_driver = {
 	.set_loopback   = genphy_loopback,
 };
 
+static const struct ethtool_phy_ops phy_ethtool_phy_ops = {
+	.get_sset_count		= phy_ethtool_get_sset_count,
+	.get_strings		= phy_ethtool_get_strings,
+	.get_stats		= phy_ethtool_get_stats,
+	.start_cable_test	= phy_start_cable_test,
+	.start_cable_test_tdr	= phy_start_cable_test_tdr,
+};
+
 static int __init phy_init(void)
 {
 	int rc;
@@ -2886,6 +3044,7 @@ static int __init phy_init(void)
 	if (rc)
 		return rc;
 
+	ethtool_set_ethtool_phy_ops(&phy_ethtool_phy_ops);
 	features_init();
 
 	rc = phy_driver_register(&genphy_c45_driver, THIS_MODULE);
@@ -2907,6 +3066,7 @@ static void __exit phy_exit(void)
 	phy_driver_unregister(&genphy_c45_driver);
 	phy_driver_unregister(&genphy_driver);
 	mdio_bus_exit();
+	ethtool_set_ethtool_phy_ops(NULL);
 }
 
 subsys_initcall(phy_init);