diff options
Diffstat (limited to 'drivers/staging/bcm/led_control.h')
-rw-r--r-- | drivers/staging/bcm/led_control.h | 84 |
1 files changed, 0 insertions, 84 deletions
diff --git a/drivers/staging/bcm/led_control.h b/drivers/staging/bcm/led_control.h deleted file mode 100644 index 1b24bf4658af..000000000000 --- a/drivers/staging/bcm/led_control.h +++ /dev/null @@ -1,84 +0,0 @@ -#ifndef _LED_CONTROL_H -#define _LED_CONTROL_H - -#define NUM_OF_LEDS 4 -#define DSD_START_OFFSET 0x0200 -#define EEPROM_VERSION_OFFSET 0x020E -#define EEPROM_HW_PARAM_POINTER_ADDRESS 0x0218 -#define EEPROM_HW_PARAM_POINTER_ADDRRES_MAP5 0x0220 -#define GPIO_SECTION_START_OFFSET 0x03 -#define COMPATIBILITY_SECTION_LENGTH 42 -#define COMPATIBILITY_SECTION_LENGTH_MAP5 84 -#define EEPROM_MAP5_MAJORVERSION 5 -#define EEPROM_MAP5_MINORVERSION 0 -#define MAX_NUM_OF_BLINKS 10 -#define NUM_OF_GPIO_PINS 16 -#define DISABLE_GPIO_NUM 0xFF -#define EVENT_SIGNALED 1 -#define MAX_FILE_NAME_BUFFER_SIZE 100 - -#define TURN_ON_LED(ad, GPIO, index) do { \ - unsigned int gpio_val = GPIO; \ - (ad->LEDInfo.LEDState[index].BitPolarity == 1) ? \ - wrmaltWithLock(ad, BCM_GPIO_OUTPUT_SET_REG, &gpio_val, sizeof(gpio_val)) : \ - wrmaltWithLock(ad, BCM_GPIO_OUTPUT_CLR_REG, &gpio_val, sizeof(gpio_val)); \ - } while (0) - -#define TURN_OFF_LED(ad, GPIO, index) do { \ - unsigned int gpio_val = GPIO; \ - (ad->LEDInfo.LEDState[index].BitPolarity == 1) ? \ - wrmaltWithLock(ad, BCM_GPIO_OUTPUT_CLR_REG, &gpio_val, sizeof(gpio_val)) : \ - wrmaltWithLock(ad, BCM_GPIO_OUTPUT_SET_REG, &gpio_val, sizeof(gpio_val)); \ - } while (0) - -enum bcm_led_colors { - RED_LED = 1, - BLUE_LED = 2, - YELLOW_LED = 3, - GREEN_LED = 4 -}; - -enum bcm_led_events { - SHUTDOWN_EXIT = 0x00, - DRIVER_INIT = 0x1, - FW_DOWNLOAD = 0x2, - FW_DOWNLOAD_DONE = 0x4, - NO_NETWORK_ENTRY = 0x8, - NORMAL_OPERATION = 0x10, - LOWPOWER_MODE_ENTER = 0x20, - IDLEMODE_CONTINUE = 0x40, - IDLEMODE_EXIT = 0x80, - LED_THREAD_INACTIVE = 0x100, /* Makes the LED thread Inactivce. It wil be equivallent to putting the thread on hold. */ - LED_THREAD_ACTIVE = 0x200, /* Makes the LED Thread Active back. */ - DRIVER_HALT = 0xff -}; /* Enumerated values of different driver states */ - -/* - * Structure which stores the information of different LED types - * and corresponding LED state information of driver states - */ -struct bcm_led_state_info { - unsigned char LED_Type; /* specify GPIO number - use 0xFF if not used */ - unsigned char LED_On_State; /* Bits set or reset for different states */ - unsigned char LED_Blink_State; /* Bits set or reset for blinking LEDs for different states */ - unsigned char GPIO_Num; - unsigned char BitPolarity; /* To represent whether H/W is normal polarity or reverse polarity */ -}; - -struct bcm_led_info { - struct bcm_led_state_info LEDState[NUM_OF_LEDS]; - bool bIdleMode_tx_from_host; /* Variable to notify whether driver came out from idlemode due to Host or target */ - bool bIdle_led_off; - wait_queue_head_t notify_led_event; - wait_queue_head_t idleModeSyncEvent; - struct task_struct *led_cntrl_threadid; - int led_thread_running; - bool bLedInitDone; -}; - -/* LED Thread state. */ -#define BCM_LED_THREAD_DISABLED 0 /* LED Thread is not running. */ -#define BCM_LED_THREAD_RUNNING_ACTIVELY 1 /* LED thread is running. */ -#define BCM_LED_THREAD_RUNNING_INACTIVELY 2 /* LED thread has been put on hold */ - -#endif |