diff options
Diffstat (limited to 'drivers/staging/media/atomisp/i2c/atomisp-mt9m114.c')
-rw-r--r-- | drivers/staging/media/atomisp/i2c/atomisp-mt9m114.c | 1910 |
1 files changed, 1910 insertions, 0 deletions
diff --git a/drivers/staging/media/atomisp/i2c/atomisp-mt9m114.c b/drivers/staging/media/atomisp/i2c/atomisp-mt9m114.c new file mode 100644 index 000000000000..ac61b391e3f9 --- /dev/null +++ b/drivers/staging/media/atomisp/i2c/atomisp-mt9m114.c @@ -0,0 +1,1910 @@ +/* + * Support for mt9m114 Camera Sensor. + * + * Copyright (c) 2010 Intel Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/string.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/kmod.h> +#include <linux/device.h> +#include <linux/fs.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/acpi.h> +#include "../include/linux/atomisp_gmin_platform.h" +#include <media/v4l2-device.h> + +#include "mt9m114.h" + +#define to_mt9m114_sensor(sd) container_of(sd, struct mt9m114_device, sd) + +/* + * TODO: use debug parameter to actually define when debug messages should + * be printed. + */ +static int debug; +static int aaalock; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Debug level (0-1)"); + +static int mt9m114_t_vflip(struct v4l2_subdev *sd, int value); +static int mt9m114_t_hflip(struct v4l2_subdev *sd, int value); +static int mt9m114_wait_state(struct i2c_client *client, int timeout); + +static int +mt9m114_read_reg(struct i2c_client *client, u16 data_length, u32 reg, u32 *val) +{ + int err; + struct i2c_msg msg[2]; + unsigned char data[4]; + + if (!client->adapter) { + v4l2_err(client, "%s error, no client->adapter\n", __func__); + return -ENODEV; + } + + if (data_length != MISENSOR_8BIT && data_length != MISENSOR_16BIT + && data_length != MISENSOR_32BIT) { + v4l2_err(client, "%s error, invalid data length\n", __func__); + return -EINVAL; + } + + msg[0].addr = client->addr; + msg[0].flags = 0; + msg[0].len = MSG_LEN_OFFSET; + msg[0].buf = data; + + /* high byte goes out first */ + data[0] = (u16)(reg >> 8); + data[1] = (u16)(reg & 0xff); + + msg[1].addr = client->addr; + msg[1].len = data_length; + msg[1].flags = I2C_M_RD; + msg[1].buf = data; + + err = i2c_transfer(client->adapter, msg, 2); + + if (err >= 0) { + *val = 0; + /* high byte comes first */ + if (data_length == MISENSOR_8BIT) + *val = data[0]; + else if (data_length == MISENSOR_16BIT) + *val = data[1] + (data[0] << 8); + else + *val = data[3] + (data[2] << 8) + + (data[1] << 16) + (data[0] << 24); + + return 0; + } + + dev_err(&client->dev, "read from offset 0x%x error %d", reg, err); + return err; +} + +static int +mt9m114_write_reg(struct i2c_client *client, u16 data_length, u16 reg, u32 val) +{ + int num_msg; + struct i2c_msg msg; + unsigned char data[6] = {0}; + __be16 *wreg; + int retry = 0; + + if (!client->adapter) { + v4l2_err(client, "%s error, no client->adapter\n", __func__); + return -ENODEV; + } + + if (data_length != MISENSOR_8BIT && data_length != MISENSOR_16BIT + && data_length != MISENSOR_32BIT) { + v4l2_err(client, "%s error, invalid data_length\n", __func__); + return -EINVAL; + } + + memset(&msg, 0, sizeof(msg)); + +again: + msg.addr = client->addr; + msg.flags = 0; + msg.len = 2 + data_length; + msg.buf = data; + + /* high byte goes out first */ + wreg = (void *)data; + *wreg = cpu_to_be16(reg); + + if (data_length == MISENSOR_8BIT) { + data[2] = (u8)(val); + } else if (data_length == MISENSOR_16BIT) { + u16 *wdata = (void *)&data[2]; + + *wdata = be16_to_cpu(*(__be16 *)&data[2]); + } else { + /* MISENSOR_32BIT */ + u32 *wdata = (void *)&data[2]; + + *wdata = be32_to_cpu(*(__be32 *)&data[2]); + } + + num_msg = i2c_transfer(client->adapter, &msg, 1); + + /* + * HACK: Need some delay here for Rev 2 sensors otherwise some + * registers do not seem to load correctly. + */ + mdelay(1); + + if (num_msg >= 0) + return 0; + + dev_err(&client->dev, "write error: wrote 0x%x to offset 0x%x error %d", + val, reg, num_msg); + if (retry <= I2C_RETRY_COUNT) { + dev_dbg(&client->dev, "retrying... %d", retry); + retry++; + msleep(20); + goto again; + } + + return num_msg; +} + +/** + * misensor_rmw_reg - Read/Modify/Write a value to a register in the sensor + * device + * @client: i2c driver client structure + * @data_length: 8/16/32-bits length + * @reg: register address + * @mask: masked out bits + * @set: bits set + * + * Read/modify/write a value to a register in the sensor device. + * Returns zero if successful, or non-zero otherwise. + */ +static int +misensor_rmw_reg(struct i2c_client *client, u16 data_length, u16 reg, + u32 mask, u32 set) +{ + int err; + u32 val; + + /* Exit when no mask */ + if (mask == 0) + return 0; + + /* @mask must not exceed data length */ + switch (data_length) { + case MISENSOR_8BIT: + if (mask & ~0xff) + return -EINVAL; + break; + case MISENSOR_16BIT: + if (mask & ~0xffff) + return -EINVAL; + break; + case MISENSOR_32BIT: + break; + default: + /* Wrong @data_length */ + return -EINVAL; + } + + err = mt9m114_read_reg(client, data_length, reg, &val); + if (err) { + v4l2_err(client, "misensor_rmw_reg error exit, read failed\n"); + return -EINVAL; + } + + val &= ~mask; + + /* + * Perform the OR function if the @set exists. + * Shift @set value to target bit location. @set should set only + * bits included in @mask. + * + * REVISIT: This function expects @set to be non-shifted. Its shift + * value is then defined to be equal to mask's LSB position. + * How about to inform values in their right offset position and avoid + * this unneeded shift operation? + */ + set <<= ffs(mask) - 1; + val |= set & mask; + + err = mt9m114_write_reg(client, data_length, reg, val); + if (err) { + v4l2_err(client, "misensor_rmw_reg error exit, write failed\n"); + return -EINVAL; + } + + return 0; +} + +static int __mt9m114_flush_reg_array(struct i2c_client *client, + struct mt9m114_write_ctrl *ctrl) +{ + struct i2c_msg msg; + const int num_msg = 1; + int ret; + int retry = 0; + __be16 *data16 = (void *)&ctrl->buffer.addr; + + if (ctrl->index == 0) + return 0; + +again: + msg.addr = client->addr; + msg.flags = 0; + msg.len = 2 + ctrl->index; + *data16 = cpu_to_be16(ctrl->buffer.addr); + msg.buf = (u8 *)&ctrl->buffer; + + ret = i2c_transfer(client->adapter, &msg, num_msg); + if (ret != num_msg) { + if (++retry <= I2C_RETRY_COUNT) { + dev_dbg(&client->dev, "retrying... %d\n", retry); + msleep(20); + goto again; + } + dev_err(&client->dev, "%s: i2c transfer error\n", __func__); + return -EIO; + } + + ctrl->index = 0; + + /* + * REVISIT: Previously we had a delay after writing data to sensor. + * But it was removed as our tests have shown it is not necessary + * anymore. + */ + + return 0; +} + +static int __mt9m114_buf_reg_array(struct i2c_client *client, + struct mt9m114_write_ctrl *ctrl, + const struct misensor_reg *next) +{ + __be16 *data16; + __be32 *data32; + int err; + + /* Insufficient buffer? Let's flush and get more free space. */ + if (ctrl->index + next->length >= MT9M114_MAX_WRITE_BUF_SIZE) { + err = __mt9m114_flush_reg_array(client, ctrl); + if (err) + return err; + } + + switch (next->length) { + case MISENSOR_8BIT: + ctrl->buffer.data[ctrl->index] = (u8)next->val; + break; + case MISENSOR_16BIT: + data16 = (__be16 *)&ctrl->buffer.data[ctrl->index]; + *data16 = cpu_to_be16((u16)next->val); + break; + case MISENSOR_32BIT: + data32 = (__be32 *)&ctrl->buffer.data[ctrl->index]; + *data32 = cpu_to_be32(next->val); + break; + default: + return -EINVAL; + } + + /* When first item is added, we need to store its starting address */ + if (ctrl->index == 0) + ctrl->buffer.addr = next->reg; + + ctrl->index += next->length; + + return 0; +} + +static int +__mt9m114_write_reg_is_consecutive(struct i2c_client *client, + struct mt9m114_write_ctrl *ctrl, + const struct misensor_reg *next) +{ + if (ctrl->index == 0) + return 1; + + return ctrl->buffer.addr + ctrl->index == next->reg; +} + +/* + * mt9m114_write_reg_array - Initializes a list of mt9m114 registers + * @client: i2c driver client structure + * @reglist: list of registers to be written + * @poll: completion polling requirement + * This function initializes a list of registers. When consecutive addresses + * are found in a row on the list, this function creates a buffer and sends + * consecutive data in a single i2c_transfer(). + * + * __mt9m114_flush_reg_array, __mt9m114_buf_reg_array() and + * __mt9m114_write_reg_is_consecutive() are internal functions to + * mt9m114_write_reg_array() and should be not used anywhere else. + * + */ +static int mt9m114_write_reg_array(struct i2c_client *client, + const struct misensor_reg *reglist, + int poll) +{ + const struct misensor_reg *next = reglist; + struct mt9m114_write_ctrl ctrl; + int err; + + if (poll == PRE_POLLING) { + err = mt9m114_wait_state(client, MT9M114_WAIT_STAT_TIMEOUT); + if (err) + return err; + } + + ctrl.index = 0; + for (; next->length != MISENSOR_TOK_TERM; next++) { + switch (next->length & MISENSOR_TOK_MASK) { + case MISENSOR_TOK_DELAY: + err = __mt9m114_flush_reg_array(client, &ctrl); + if (err) + return err; + msleep(next->val); + break; + case MISENSOR_TOK_RMW: + err = __mt9m114_flush_reg_array(client, &ctrl); + err |= misensor_rmw_reg(client, + next->length & + ~MISENSOR_TOK_RMW, + next->reg, next->val, + next->val2); + if (err) { + dev_err(&client->dev, "%s read err. aborted\n", + __func__); + return -EINVAL; + } + break; + default: + /* + * If next address is not consecutive, data needs to be + * flushed before proceed. + */ + if (!__mt9m114_write_reg_is_consecutive(client, &ctrl, + next)) { + err = __mt9m114_flush_reg_array(client, &ctrl); + if (err) + return err; + } + err = __mt9m114_buf_reg_array(client, &ctrl, next); + if (err) { + v4l2_err(client, "%s: write error, aborted\n", + __func__); + return err; + } + break; + } + } + + err = __mt9m114_flush_reg_array(client, &ctrl); + if (err) + return err; + + if (poll == POST_POLLING) + return mt9m114_wait_state(client, MT9M114_WAIT_STAT_TIMEOUT); + + return 0; +} + +static int mt9m114_wait_state(struct i2c_client *client, int timeout) +{ + int ret; + unsigned int val; + + while (timeout-- > 0) { + ret = mt9m114_read_reg(client, MISENSOR_16BIT, 0x0080, &val); + if (ret) + return ret; + if ((val & 0x2) == 0) + return 0; + msleep(20); + } + + return -EINVAL; +} + +static int mt9m114_set_suspend(struct v4l2_subdev *sd) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return mt9m114_write_reg_array(client, + mt9m114_standby_reg, POST_POLLING); +} + +static int mt9m114_init_common(struct v4l2_subdev *sd) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return mt9m114_write_reg_array(client, mt9m114_common, PRE_POLLING); +} + +static int power_ctrl(struct v4l2_subdev *sd, bool flag) +{ + int ret; + struct mt9m114_device *dev = to_mt9m114_sensor(sd); + + if (!dev || !dev->platform_data) + return -ENODEV; + + if (flag) { + ret = dev->platform_data->v2p8_ctrl(sd, 1); + if (ret == 0) { + ret = dev->platform_data->v1p8_ctrl(sd, 1); + if (ret) + ret = dev->platform_data->v2p8_ctrl(sd, 0); + } + } else { + ret = dev->platform_data->v2p8_ctrl(sd, 0); + ret = dev->platform_data->v1p8_ctrl(sd, 0); + } + return ret; +} + +static int gpio_ctrl(struct v4l2_subdev *sd, bool flag) +{ + int ret; + struct mt9m114_device *dev = to_mt9m114_sensor(sd); + + if (!dev || !dev->platform_data) + return -ENODEV; + + /* Note: current modules wire only one GPIO signal (RESET#), + * but the schematic wires up two to the connector. BIOS + * versions have been unfortunately inconsistent with which + * ACPI index RESET# is on, so hit both */ + + if (flag) { + ret = dev->platform_data->gpio0_ctrl(sd, 0); + ret = dev->platform_data->gpio1_ctrl(sd, 0); + msleep(60); + ret |= dev->platform_data->gpio0_ctrl(sd, 1); + ret |= dev->platform_data->gpio1_ctrl(sd, 1); + } else { + ret = dev->platform_data->gpio0_ctrl(sd, 0); + ret = dev->platform_data->gpio1_ctrl(sd, 0); + } + return ret; +} + +static int power_up(struct v4l2_subdev *sd) +{ + struct mt9m114_device *dev = to_mt9m114_sensor(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + int ret; + + if (!dev->platform_data) { + dev_err(&client->dev, "no camera_sensor_platform_data"); + return -ENODEV; + } + + /* power control */ + ret = power_ctrl(sd, 1); + if (ret) + goto fail_power; + + /* flis clock control */ + ret = dev->platform_data->flisclk_ctrl(sd, 1); + if (ret) + goto fail_clk; + + /* gpio ctrl */ + ret = gpio_ctrl(sd, 1); + if (ret) + dev_err(&client->dev, "gpio failed 1\n"); + /* + * according to DS, 44ms is needed between power up and first i2c + * commend + */ + msleep(50); + + return 0; + +fail_clk: + dev->platform_data->flisclk_ctrl(sd, 0); +fail_power: + power_ctrl(sd, 0); + dev_err(&client->dev, "sensor power-up failed\n"); + + return ret; +} + +static int power_down(struct v4l2_subdev *sd) +{ + struct mt9m114_device *dev = to_mt9m114_sensor(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + int ret; + + if (!dev->platform_data) { + dev_err(&client->dev, "no camera_sensor_platform_data"); + return -ENODEV; + } + + ret = dev->platform_data->flisclk_ctrl(sd, 0); + if (ret) + dev_err(&client->dev, "flisclk failed\n"); + + /* gpio ctrl */ + ret = gpio_ctrl(sd, 0); + if (ret) + dev_err(&client->dev, "gpio failed 1\n"); + + /* power control */ + ret = power_ctrl(sd, 0); + if (ret) + dev_err(&client->dev, "vprog failed.\n"); + + /*according to DS, 20ms is needed after power down*/ + msleep(20); + + return ret; +} + +static int mt9m114_s_power(struct v4l2_subdev *sd, int power) +{ + if (power == 0) + return power_down(sd); + else { + if (power_up(sd)) + return -EINVAL; + + return mt9m114_init_common(sd); + } +} + +/* + * distance - calculate the distance + * @res: resolution + * @w: width + * @h: height + * + * Get the gap between resolution and w/h. + * res->width/height smaller than w/h wouldn't be considered. + * Returns the value of gap or -1 if fail. + */ +#define LARGEST_ALLOWED_RATIO_MISMATCH 600 +static int distance(struct mt9m114_res_struct const *res, u32 w, u32 h) +{ + unsigned int w_ratio; + unsigned int h_ratio; + int match; + + if (w == 0) + return -1; + w_ratio = (res->width << 13) / w; + if (h == 0) + return -1; + h_ratio = (res->height << 13) / h; + if (h_ratio == 0) + return -1; + match = abs(((w_ratio << 13) / h_ratio) - 8192); + + if ((w_ratio < 8192) || (h_ratio < 8192) || + (match > LARGEST_ALLOWED_RATIO_MISMATCH)) + return -1; + + return w_ratio + h_ratio; +} + +/* Return the nearest higher resolution index */ +static int nearest_resolution_index(int w, int h) +{ + int i; + int idx = -1; + int dist; + int min_dist = INT_MAX; + const struct mt9m114_res_struct *tmp_res = NULL; + + for (i = 0; i < ARRAY_SIZE(mt9m114_res); i++) { + tmp_res = &mt9m114_res[i]; + dist = distance(tmp_res, w, h); + if (dist == -1) + continue; + if (dist < min_dist) { + min_dist = dist; + idx = i; + } + } + + return idx; +} + +static int mt9m114_try_res(u32 *w, u32 *h) +{ + int idx = 0; + + if ((*w > MT9M114_RES_960P_SIZE_H) + || (*h > MT9M114_RES_960P_SIZE_V)) { + *w = MT9M114_RES_960P_SIZE_H; + *h = MT9M114_RES_960P_SIZE_V; + } else { + idx = nearest_resolution_index(*w, *h); + + /* + * nearest_resolution_index() doesn't return smaller + * resolutions. If it fails, it means the requested + * resolution is higher than wecan support. Fallback + * to highest possible resolution in this case. + */ + if (idx == -1) + idx = ARRAY_SIZE(mt9m114_res) - 1; + + *w = mt9m114_res[idx].width; + *h = mt9m114_res[idx].height; + } + + return 0; +} + +static struct mt9m114_res_struct *mt9m114_to_res(u32 w, u32 h) +{ + int index; + + for (index = 0; index < N_RES; index++) { + if ((mt9m114_res[index].width == w) && + (mt9m114_res[index].height == h)) + break; + } + + /* No mode found */ + if (index >= N_RES) + return NULL; + + return &mt9m114_res[index]; +} + +static int mt9m114_res2size(struct v4l2_subdev *sd, int *h_size, int *v_size) +{ + struct mt9m114_device *dev = to_mt9m114_sensor(sd); + unsigned short hsize; + unsigned short vsize; + + switch (dev->res) { + case MT9M114_RES_736P: + hsize = MT9M114_RES_736P_SIZE_H; + vsize = MT9M114_RES_736P_SIZE_V; + break; + case MT9M114_RES_864P: + hsize = MT9M114_RES_864P_SIZE_H; + vsize = MT9M114_RES_864P_SIZE_V; + break; + case MT9M114_RES_960P: + hsize = MT9M114_RES_960P_SIZE_H; + vsize = MT9M114_RES_960P_SIZE_V; + break; + default: + v4l2_err(sd, "%s: Resolution 0x%08x unknown\n", __func__, + dev->res); + return -EINVAL; + } + + if (h_size) + *h_size = hsize; + if (v_size) + *v_size = vsize; + + return 0; +} + +static int mt9m114_get_intg_factor(struct i2c_client *client, + struct camera_mipi_info *info, + const struct mt9m114_res_struct *res) +{ + struct atomisp_sensor_mode_data *buf = &info->data; + u32 reg_val; + int ret; + + if (!info) + return -EINVAL; + + ret = mt9m114_read_reg(client, MISENSOR_32BIT, + REG_PIXEL_CLK, ®_val); + if (ret) + return ret; + buf->vt_pix_clk_freq_mhz = reg_val; + + /* get integration time */ + buf->coarse_integration_time_min = MT9M114_COARSE_INTG_TIME_MIN; + buf->coarse_integration_time_max_margin = + MT9M114_COARSE_INTG_TIME_MAX_MARGIN; + + buf->fine_integration_time_min = MT9M114_FINE_INTG_TIME_MIN; + buf->fine_integration_time_max_margin = + MT9M114_FINE_INTG_TIME_MAX_MARGIN; + + buf->fine_integration_time_def = MT9M114_FINE_INTG_TIME_MIN; + + buf->frame_length_lines = res->lines_per_frame; + buf->line_length_pck = res->pixels_per_line; + buf->read_mode = res->bin_mode; + + /* get the cropping and output resolution to ISP for this mode. */ + ret = mt9m114_read_reg(client, MISENSOR_16BIT, + REG_H_START, ®_val); + if (ret) + return ret; + buf->crop_horizontal_start = reg_val; + + ret = mt9m114_read_reg(client, MISENSOR_16BIT, + REG_V_START, ®_val); + if (ret) + return ret; + buf->crop_vertical_start = reg_val; + + ret = mt9m114_read_reg(client, MISENSOR_16BIT, + REG_H_END, ®_val); + if (ret) + return ret; + buf->crop_horizontal_end = reg_val; + + ret = mt9m114_read_reg(client, MISENSOR_16BIT, + REG_V_END, ®_val); + if (ret) + return ret; + buf->crop_vertical_end = reg_val; + + ret = mt9m114_read_reg(client, MISENSOR_16BIT, + REG_WIDTH, ®_val); + if (ret) + return ret; + buf->output_width = reg_val; + + ret = mt9m114_read_reg(client, MISENSOR_16BIT, + REG_HEIGHT, ®_val); + if (ret) + return ret; + buf->output_height = reg_val; + + ret = mt9m114_read_reg(client, MISENSOR_16BIT, + REG_TIMING_HTS, ®_val); + if (ret) + return ret; + buf->line_length_pck = reg_val; + + ret = mt9m114_read_reg(client, MISENSOR_16BIT, + REG_TIMING_VTS, ®_val); + if (ret) + return ret; + buf->frame_length_lines = reg_val; + + buf->binning_factor_x = res->bin_factor_x ? + res->bin_factor_x : 1; + buf->binning_factor_y = res->bin_factor_y ? + res->bin_factor_y : 1; + return 0; +} + +static int mt9m114_get_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *format) +{ + struct v4l2_mbus_framefmt *fmt = &format->format; + int width, height; + int ret; + + if (format->pad) + return -EINVAL; + fmt->code = MEDIA_BUS_FMT_SGRBG10_1X10; + + ret = mt9m114_res2size(sd, &width, &height); + if (ret) + return ret; + fmt->width = width; + fmt->height = height; + + return 0; +} + +static int mt9m114_set_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *format) +{ + struct v4l2_mbus_framefmt *fmt = &format->format; + struct i2c_client *c = v4l2_get_subdevdata(sd); + struct mt9m114_device *dev = to_mt9m114_sensor(sd); + struct mt9m114_res_struct *res_index; + u32 width = fmt->width; + u32 height = fmt->height; + struct camera_mipi_info *mt9m114_info = NULL; + + int ret; + + if (format->pad) + return -EINVAL; + dev->streamon = 0; + dev->first_exp = MT9M114_DEFAULT_FIRST_EXP; + + mt9m114_info = v4l2_get_subdev_hostdata(sd); + if (!mt9m114_info) + return -EINVAL; + + mt9m114_try_res(&width, &height); + if (format->which == V4L2_SUBDEV_FORMAT_TRY) { + cfg->try_fmt = *fmt; + return 0; + } + res_index = mt9m114_to_res(width, height); + + /* Sanity check */ + if (unlikely(!res_index)) { + WARN_ON(1); + return -EINVAL; + } + + switch (res_index->res) { + case MT9M114_RES_736P: + ret = mt9m114_write_reg_array(c, mt9m114_736P_init, NO_POLLING); + ret += misensor_rmw_reg(c, MISENSOR_16BIT, MISENSOR_READ_MODE, + MISENSOR_R_MODE_MASK, MISENSOR_NORMAL_SET); + break; + case MT9M114_RES_864P: + ret = mt9m114_write_reg_array(c, mt9m114_864P_init, NO_POLLING); + ret += misensor_rmw_reg(c, MISENSOR_16BIT, MISENSOR_READ_MODE, + MISENSOR_R_MODE_MASK, MISENSOR_NORMAL_SET); + break; + case MT9M114_RES_960P: + ret = mt9m114_write_reg_array(c, mt9m114_976P_init, NO_POLLING); + /* set sensor read_mode to Normal */ + ret += misensor_rmw_reg(c, MISENSOR_16BIT, MISENSOR_READ_MODE, + MISENSOR_R_MODE_MASK, MISENSOR_NORMAL_SET); + break; + default: + v4l2_err(sd, "set resolution: %d failed!\n", res_index->res); + return -EINVAL; + } + + if (ret) + return -EINVAL; + + ret = mt9m114_write_reg_array(c, mt9m114_chgstat_reg, POST_POLLING); + if (ret < 0) + return ret; + + if (mt9m114_set_suspend(sd)) + return -EINVAL; + + if (dev->res != res_index->res) { + int index; + + /* Switch to different size */ + if (width <= 640) { + dev->nctx = 0x00; /* Set for context A */ + } else { + /* + * Context B is used for resolutions larger than 640x480 + * Using YUV for Context B. + */ + dev->nctx = 0x01; /* set for context B */ + } + + /* + * Marked current sensor res as being "used" + * + * REVISIT: We don't need to use an "used" field on each mode + * list entry to know which mode is selected. If this + * information is really necessary, how about to use a single + * variable on sensor dev struct? + */ + for (index = 0; index < N_RES; index++) { + if ((width == mt9m114_res[index].width) && + (height == mt9m114_res[index].height)) { + mt9m114_res[index].used = true; + continue; + } + mt9m114_res[index].used = false; + } + } + ret = mt9m114_get_intg_factor(c, mt9m114_info, + &mt9m114_res[res_index->res]); + if (ret) { + dev_err(&c->dev, "failed to get integration_factor\n"); + return -EINVAL; + } + /* + * mt9m114 - we don't poll for context switch + * because it does not happen with streaming disabled. + */ + dev->res = res_index->res; + + fmt->width = width; + fmt->height = height; + fmt->code = MEDIA_BUS_FMT_SGRBG10_1X10; + return 0; +} + +/* TODO: Update to SOC functions, remove exposure and gain */ +static int mt9m114_g_focal(struct v4l2_subdev *sd, s32 *val) +{ + *val = (MT9M114_FOCAL_LENGTH_NUM << 16) | MT9M114_FOCAL_LENGTH_DEM; + return 0; +} + +static int mt9m114_g_fnumber(struct v4l2_subdev *sd, s32 *val) +{ + /*const f number for mt9m114*/ + *val = (MT9M114_F_NUMBER_DEFAULT_NUM << 16) | MT9M114_F_NUMBER_DEM; + return 0; +} + +static int mt9m114_g_fnumber_range(struct v4l2_subdev *sd, s32 *val) +{ + *val = (MT9M114_F_NUMBER_DEFAULT_NUM << 24) | + (MT9M114_F_NUMBER_DEM << 16) | + (MT9M114_F_NUMBER_DEFAULT_NUM << 8) | MT9M114_F_NUMBER_DEM; + return 0; +} + +/* Horizontal flip the image. */ +static int mt9m114_g_hflip(struct v4l2_subdev *sd, s32 *val) +{ + struct i2c_client *c = v4l2_get_subdevdata(sd); + int ret; + u32 data; + + ret = mt9m114_read_reg(c, MISENSOR_16BIT, + (u32)MISENSOR_READ_MODE, &data); + if (ret) + return ret; + *val = !!(data & MISENSOR_HFLIP_MASK); + + return 0; +} + +static int mt9m114_g_vflip(struct v4l2_subdev *sd, s32 *val) +{ + struct i2c_client *c = v4l2_get_subdevdata(sd); + int ret; + u32 data; + + ret = mt9m114_read_reg(c, MISENSOR_16BIT, + (u32)MISENSOR_READ_MODE, &data); + if (ret) + return ret; + *val = !!(data & MISENSOR_VFLIP_MASK); + + return 0; +} + +static long mt9m114_s_exposure(struct v4l2_subdev *sd, + struct atomisp_exposure *exposure) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9m114_device *dev = to_mt9m114_sensor(sd); + int ret = 0; + unsigned int coarse_integration = 0; + unsigned int FLines = 0; + unsigned int FrameLengthLines = 0; /* ExposureTime.FrameLengthLines; */ + unsigned int AnalogGain, DigitalGain; + u32 AnalogGainToWrite = 0; + + dev_dbg(&client->dev, "%s(0x%X 0x%X 0x%X)\n", __func__, + exposure->integration_time[0], exposure->gain[0], + exposure->gain[1]); + + coarse_integration = exposure->integration_time[0]; + /* fine_integration = ExposureTime.FineIntegrationTime; */ + /* FrameLengthLines = ExposureTime.FrameLengthLines; */ + FLines = mt9m114_res[dev->res].lines_per_frame; + AnalogGain = exposure->gain[0]; + DigitalGain = exposure->gain[1]; + if (!dev->streamon) { + /*Save the first exposure values while stream is off*/ + dev->first_exp = coarse_integration; + dev->first_gain = AnalogGain; + dev->first_diggain = DigitalGain; + } + /* DigitalGain = 0x400 * (((u16) DigitalGain) >> 8) + + ((unsigned int)(0x400 * (((u16) DigitalGain) & 0xFF)) >>8); */ + + /* set frame length */ + if (FLines < coarse_integration + 6) + FLines = coarse_integration + 6; + if (FLines < FrameLengthLines) + FLines = FrameLengthLines; + ret = mt9m114_write_reg(client, MISENSOR_16BIT, 0x300A, FLines); + if (ret) { + v4l2_err(client, "%s: fail to set FLines\n", __func__); + return -EINVAL; + } + + /* set coarse integration */ + /* 3A provide real exposure time. + should not translate to any value here. */ + ret = mt9m114_write_reg(client, MISENSOR_16BIT, + REG_EXPO_COARSE, (u16)(coarse_integration)); + if (ret) { + v4l2_err(client, "%s: fail to set exposure time\n", __func__); + return -EINVAL; + } + + /* + // set analog/digital gain + switch(AnalogGain) + { + case 0: + AnalogGainToWrite = 0x0; + break; + case 1: + AnalogGainToWrite = 0x20; + break; + case 2: + AnalogGainToWrite = 0x60; + break; + case 4: + AnalogGainToWrite = 0xA0; + break; + case 8: + AnalogGainToWrite = 0xE0; + break; + default: + AnalogGainToWrite = 0x20; + break; + } + */ + if (DigitalGain >= 16 || DigitalGain <= 1) + DigitalGain = 1; + /* AnalogGainToWrite = + (u16)((DigitalGain << 12) | AnalogGainToWrite); */ + AnalogGainToWrite = (u16)((DigitalGain << 12) | (u16)AnalogGain); + ret = mt9m114_write_reg(client, MISENSOR_16BIT, + REG_GAIN, AnalogGainToWrite); + if (ret) { + v4l2_err(client, "%s: fail to set AnalogGainToWrite\n", + __func__); + return -EINVAL; + } + + return ret; +} + +static long mt9m114_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg) +{ + switch (cmd) { + case ATOMISP_IOC_S_EXPOSURE: + return mt9m114_s_exposure(sd, arg); + default: + return -EINVAL; + } + + return 0; +} + +/* This returns the exposure time being used. This should only be used + for filling in EXIF data, not for actual image processing. */ +static int mt9m114_g_exposure(struct v4l2_subdev *sd, s32 *value) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + u32 coarse; + int ret; + + /* the fine integration time is currently not calculated */ + ret = mt9m114_read_reg(client, MISENSOR_16BIT, + REG_EXPO_COARSE, &coarse); + if (ret) + return ret; + + *value = coarse; + return 0; +} + +/* + * This function will return the sensor supported max exposure zone number. + * the sensor which supports max exposure zone number is 1. + */ +static int mt9m114_g_exposure_zone_num(struct v4l2_subdev *sd, s32 *val) +{ + *val = 1; + + return 0; +} + +/* + * set exposure metering, average/center_weighted/spot/matrix. + */ +static int mt9m114_s_exposure_metering(struct v4l2_subdev *sd, s32 val) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + int ret; + + switch (val) { + case V4L2_EXPOSURE_METERING_SPOT: + ret = mt9m114_write_reg_array(client, mt9m114_exp_average, + NO_POLLING); + if (ret) { + dev_err(&client->dev, "write exp_average reg err.\n"); + return ret; + } + break; + case V4L2_EXPOSURE_METERING_CENTER_WEIGHTED: + default: + ret = mt9m114_write_reg_array(client, mt9m114_exp_center, + NO_POLLING); + if (ret) { + dev_err(&client->dev, "write exp_default reg err"); + return ret; + } + } + + return 0; +} + +/* + * This function is for touch exposure feature. + */ +static int mt9m114_s_exposure_selection(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_selection *sel) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct misensor_reg exp_reg; + int width, height; + int grid_width, grid_height; + int grid_left, grid_top, grid_right, grid_bottom; + int win_left, win_top, win_right, win_bottom; + int i, j; + int ret; + + if (sel->which != V4L2_SUBDEV_FORMAT_TRY && + sel->which != V4L2_SUBDEV_FORMAT_ACTIVE) + return -EINVAL; + + grid_left = sel->r.left; + grid_top = sel->r.top; + grid_right = sel->r.left + sel->r.width - 1; + grid_bottom = sel->r.top + sel->r.height - 1; + + ret = mt9m114_res2size(sd, &width, &height); + if (ret) + return ret; + + grid_width = width / 5; + grid_height = height / 5; + + if (grid_width && grid_height) { + win_left = grid_left / grid_width; + win_top = grid_top / grid_height; + win_right = grid_right / grid_width; + win_bottom = grid_bottom / grid_height; + } else { + dev_err(&client->dev, "Incorrect exp grid.\n"); + return -EINVAL; + } + + win_left = clamp_t(int, win_left, 0, 4); + win_top = clamp_t(int, win_top, 0, 4); + win_right = clamp_t(int, win_right, 0, 4); + win_bottom = clamp_t(int, win_bottom, 0, 4); + + ret = mt9m114_write_reg_array(client, mt9m114_exp_average, NO_POLLING); + if (ret) { + dev_err(&client->dev, "write exp_average reg err.\n"); + return ret; + } + + for (i = win_top; i <= win_bottom; i++) { + for (j = win_left; j <= win_right; j++) { + exp_reg = mt9m114_exp_win[i][j]; + + ret = mt9m114_write_reg(client, exp_reg.length, + exp_reg.reg, exp_reg.val); + if (ret) { + dev_err(&client->dev, "write exp_reg err.\n"); + return ret; + } + } + } + + return 0; +} + +static int mt9m114_g_bin_factor_x(struct v4l2_subdev *sd, s32 *val) +{ + struct mt9m114_device *dev = to_mt9m114_sensor(sd); + + *val = mt9m114_res[dev->res].bin_factor_x; + + return 0; +} + +static int mt9m114_g_bin_factor_y(struct v4l2_subdev *sd, s32 *val) +{ + struct mt9m114_device *dev = to_mt9m114_sensor(sd); + + *val = mt9m114_res[dev->res].bin_factor_y; + + return 0; +} + +static int mt9m114_s_ev(struct v4l2_subdev *sd, s32 val) +{ + struct i2c_client *c = v4l2_get_subdevdata(sd); + s32 luma = 0x37; + int err; + + /* EV value only support -2 to 2 + * 0: 0x37, 1:0x47, 2:0x57, -1:0x27, -2:0x17 + */ + if (val < -2 || val > 2) + return -EINVAL; + luma += 0x10 * val; + dev_dbg(&c->dev, "%s val:%d luma:0x%x\n", __func__, val, luma); + err = mt9m114_write_reg(c, MISENSOR_16BIT, 0x098E, 0xC87A); + if (err) { + dev_err(&c->dev, "%s logic addr access error\n", __func__); + return err; + } + err = mt9m114_write_reg(c, MISENSOR_8BIT, 0xC87A, (u32)luma); + if (err) { + dev_err(&c->dev, "%s write target_average_luma failed\n", + __func__); + return err; + } + udelay(10); + + return 0; +} + +static int mt9m114_g_ev(struct v4l2_subdev *sd, s32 *val) +{ + struct i2c_client *c = v4l2_get_subdevdata(sd); + int err; + u32 luma; + + err = mt9m114_write_reg(c, MISENSOR_16BIT, 0x098E, 0xC87A); + if (err) { + dev_err(&c->dev, "%s logic addr access error\n", __func__); + return err; + } + err = mt9m114_read_reg(c, MISENSOR_8BIT, 0xC87A, &luma); + if (err) { + dev_err(&c->dev, "%s read target_average_luma failed\n", + __func__); + return err; + } + luma -= 0x17; + luma /= 0x10; + *val = (s32)luma - 2; + dev_dbg(&c->dev, "%s val:%d\n", __func__, *val); + + return 0; +} + +/* Fake interface + * mt9m114 now can not support 3a_lock +*/ +static int mt9m114_s_3a_lock(struct v4l2_subdev *sd, s32 val) +{ + aaalock = val; + return 0; +} + +static int mt9m114_g_3a_lock(struct v4l2_subdev *sd, s32 *val) +{ + if (aaalock) + return V4L2_LOCK_EXPOSURE | V4L2_LOCK_WHITE_BALANCE + | V4L2_LOCK_FOCUS; + return 0; +} + +static int mt9m114_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct mt9m114_device *dev = + container_of(ctrl->handler, struct mt9m114_device, ctrl_handler); + struct i2c_client *client = v4l2_get_subdevdata(&dev->sd); + int ret = 0; + + switch (ctrl->id) { + case V4L2_CID_VFLIP: + dev_dbg(&client->dev, "%s: CID_VFLIP:%d.\n", + __func__, ctrl->val); + ret = mt9m114_t_vflip(&dev->sd, ctrl->val); + break; + case V4L2_CID_HFLIP: + dev_dbg(&client->dev, "%s: CID_HFLIP:%d.\n", + __func__, ctrl->val); + ret = mt9m114_t_hflip(&dev->sd, ctrl->val); + break; + case V4L2_CID_EXPOSURE_METERING: + ret = mt9m114_s_exposure_metering(&dev->sd, ctrl->val); + break; + case V4L2_CID_EXPOSURE: + ret = mt9m114_s_ev(&dev->sd, ctrl->val); + break; + case V4L2_CID_3A_LOCK: + ret = mt9m114_s_3a_lock(&dev->sd, ctrl->val); + break; + default: + ret = -EINVAL; + } + return ret; +} + +static int mt9m114_g_volatile_ctrl(struct v4l2_ctrl *ctrl) +{ + struct mt9m114_device *dev = + container_of(ctrl->handler, struct mt9m114_device, ctrl_handler); + int ret = 0; + + switch (ctrl->id) { + case V4L2_CID_VFLIP: + ret = mt9m114_g_vflip(&dev->sd, &ctrl->val); + break; + case V4L2_CID_HFLIP: + ret = mt9m114_g_hflip(&dev->sd, &ctrl->val); + break; + case V4L2_CID_FOCAL_ABSOLUTE: + ret = mt9m114_g_focal(&dev->sd, &ctrl->val); + break; + case V4L2_CID_FNUMBER_ABSOLUTE: + ret = mt9m114_g_fnumber(&dev->sd, &ctrl->val); + break; + case V4L2_CID_FNUMBER_RANGE: + ret = mt9m114_g_fnumber_range(&dev->sd, &ctrl->val); + break; + case V4L2_CID_EXPOSURE_ABSOLUTE: + ret = mt9m114_g_exposure(&dev->sd, &ctrl->val); + break; + case V4L2_CID_EXPOSURE_ZONE_NUM: + ret = mt9m114_g_exposure_zone_num(&dev->sd, &ctrl->val); + break; + case V4L2_CID_BIN_FACTOR_HORZ: + ret = mt9m114_g_bin_factor_x(&dev->sd, &ctrl->val); + break; + case V4L2_CID_BIN_FACTOR_VERT: + ret = mt9m114_g_bin_factor_y(&dev->sd, &ctrl->val); + break; + case V4L2_CID_EXPOSURE: + ret = mt9m114_g_ev(&dev->sd, &ctrl->val); + break; + case V4L2_CID_3A_LOCK: + ret = mt9m114_g_3a_lock(&dev->sd, &ctrl->val); + break; + default: + ret = -EINVAL; + } + + return ret; +} + +static const struct v4l2_ctrl_ops ctrl_ops = { + .s_ctrl = mt9m114_s_ctrl, + .g_volatile_ctrl = mt9m114_g_volatile_ctrl +}; + +static struct v4l2_ctrl_config mt9m114_controls[] = { + { + .ops = &ctrl_ops, + .id = V4L2_CID_VFLIP, + .name = "Image v-Flip", + .type = V4L2_CTRL_TYPE_INTEGER, + .min = 0, + .max = 1, + .step = 1, + .def = 0, + }, + { + .ops = &ctrl_ops, + .id = V4L2_CID_HFLIP, + .name = "Image h-Flip", + .type = V4L2_CTRL_TYPE_INTEGER, + .min = 0, + .max = 1, + .step = 1, + .def = 0, + }, + { + .ops = &ctrl_ops, + .id = V4L2_CID_FOCAL_ABSOLUTE, + .name = "focal length", + .type = V4L2_CTRL_TYPE_INTEGER, + .min = MT9M114_FOCAL_LENGTH_DEFAULT, + .max = MT9M114_FOCAL_LENGTH_DEFAULT, + .step = 1, + .def = MT9M114_FOCAL_LENGTH_DEFAULT, + .flags = 0, + }, + { + .ops = &ctrl_ops, + .id = V4L2_CID_FNUMBER_ABSOLUTE, + .name = "f-number", + .type = V4L2_CTRL_TYPE_INTEGER, + .min = MT9M114_F_NUMBER_DEFAULT, + .max = MT9M114_F_NUMBER_DEFAULT, + .step = 1, + .def = MT9M114_F_NUMBER_DEFAULT, + .flags = 0, + }, + { + .ops = &ctrl_ops, + .id = V4L2_CID_FNUMBER_RANGE, + .name = "f-number range", + .type = V4L2_CTRL_TYPE_INTEGER, + .min = MT9M114_F_NUMBER_RANGE, + .max = MT9M114_F_NUMBER_RANGE, + .step = 1, + .def = MT9M114_F_NUMBER_RANGE, + .flags = 0, + }, + { + .ops = &ctrl_ops, + .id = V4L2_CID_EXPOSURE_ABSOLUTE, + .name = "exposure", + .type = V4L2_CTRL_TYPE_INTEGER, + .min = 0, + .max = 0xffff, + .step = 1, + .def = 0, + .flags = 0, + }, + { + .ops = &ctrl_ops, + .id = V4L2_CID_EXPOSURE_ZONE_NUM, + .name = "one-time exposure zone number", + .type = V4L2_CTRL_TYPE_INTEGER, + .min = 0, + .max = 0xffff, + .step = 1, + .def = 0, + .flags = 0, + }, + { + .ops = &ctrl_ops, + .id = V4L2_CID_EXPOSURE_METERING, + .name = "metering", + .type = V4L2_CTRL_TYPE_MENU, + .min = 0, + .max = 3, + .step = 0, + .def = 1, + .flags = 0, + }, + { + .ops = &ctrl_ops, + .id = V4L2_CID_BIN_FACTOR_HORZ, + .name = "horizontal binning factor", + .type = V4L2_CTRL_TYPE_INTEGER, + .min = 0, + .max = MT9M114_BIN_FACTOR_MAX, + .step = 1, + .def = 0, + .flags = 0, + }, + { + .ops = &ctrl_ops, + .id = V4L2_CID_BIN_FACTOR_VERT, + .name = "vertical binning factor", + .type = V4L2_CTRL_TYPE_INTEGER, + .min = 0, + .max = MT9M114_BIN_FACTOR_MAX, + .step = 1, + .def = 0, + .flags = 0, + }, + { + .ops = &ctrl_ops, + .id = V4L2_CID_EXPOSURE, + .name = "exposure biasx", + .type = V4L2_CTRL_TYPE_INTEGER, + .min = -2, + .max = 2, + .step = 1, + .def = 0, + .flags = 0, + }, + { + .ops = &ctrl_ops, + .id = V4L2_CID_3A_LOCK, + .name = "3a lock", + .type = V4L2_CTRL_TYPE_BITMASK, + .min = 0, + .max = V4L2_LOCK_EXPOSURE | V4L2_LOCK_WHITE_BALANCE | V4L2_LOCK_FOCUS, + .step = 1, + .def = 0, + .flags = 0, + }, +}; + +static int mt9m114_detect(struct mt9m114_device *dev, struct i2c_client *client) +{ + struct i2c_adapter *adapter = client->adapter; + u32 retvalue; + + if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) { + dev_err(&client->dev, "%s: i2c error", __func__); + return -ENODEV; + } + mt9m114_read_reg(client, MISENSOR_16BIT, (u32)MT9M114_PID, &retvalue); + dev->real_model_id = retvalue; + + if (retvalue != MT9M114_MOD_ID) { + dev_err(&client->dev, "%s: failed: client->addr = %x\n", + __func__, client->addr); + return -ENODEV; + } + + return 0; +} + +static int +mt9m114_s_config(struct v4l2_subdev *sd, int irq, void *platform_data) +{ + struct mt9m114_device *dev = to_mt9m114_sensor(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + int ret; + + if (!platform_data) + return -ENODEV; + + dev->platform_data = + (struct camera_sensor_platform_data *)platform_data; + + ret = power_up(sd); + if (ret) { + v4l2_err(client, "mt9m114 power-up err"); + return ret; + } + + /* config & detect sensor */ + ret = mt9m114_detect(dev, client); + if (ret) { + v4l2_err(client, "mt9m114_detect err s_config.\n"); + goto fail_detect; + } + + ret = dev->platform_data->csi_cfg(sd, 1); + if (ret) + goto fail_csi_cfg; + + ret = mt9m114_set_suspend(sd); + if (ret) { + v4l2_err(client, "mt9m114 suspend err"); + return ret; + } + + ret = power_down(sd); + if (ret) { + v4l2_err(client, "mt9m114 power down err"); + return ret; + } + + return ret; + +fail_csi_cfg: + dev->platform_data->csi_cfg(sd, 0); +fail_detect: + power_down(sd); + dev_err(&client->dev, "sensor power-gating failed\n"); + return ret; +} + +/* Horizontal flip the image. */ +static int mt9m114_t_hflip(struct v4l2_subdev *sd, int value) +{ + struct i2c_client *c = v4l2_get_subdevdata(sd); + struct mt9m114_device *dev = to_mt9m114_sensor(sd); + int err; + /* set for direct mode */ + err = mt9m114_write_reg(c, MISENSOR_16BIT, 0x098E, 0xC850); + if (value) { + /* enable H flip ctx A */ + err += misensor_rmw_reg(c, MISENSOR_8BIT, 0xC850, 0x01, 0x01); + err += misensor_rmw_reg(c, MISENSOR_8BIT, 0xC851, 0x01, 0x01); + /* ctx B */ + err += misensor_rmw_reg(c, MISENSOR_8BIT, 0xC888, 0x01, 0x01); + err += misensor_rmw_reg(c, MISENSOR_8BIT, 0xC889, 0x01, 0x01); + + err += misensor_rmw_reg(c, MISENSOR_16BIT, MISENSOR_READ_MODE, + MISENSOR_HFLIP_MASK, MISENSOR_FLIP_EN); + + dev->bpat = MT9M114_BPAT_GRGRBGBG; + } else { + /* disable H flip ctx A */ + err += misensor_rmw_reg(c, MISENSOR_8BIT, 0xC850, 0x01, 0x00); + err += misensor_rmw_reg(c, MISENSOR_8BIT, 0xC851, 0x01, 0x00); + /* ctx B */ + err += misensor_rmw_reg(c, MISENSOR_8BIT, 0xC888, 0x01, 0x00); + err += misensor_rmw_reg(c, MISENSOR_8BIT, 0xC889, 0x01, 0x00); + + err += misensor_rmw_reg(c, MISENSOR_16BIT, MISENSOR_READ_MODE, + MISENSOR_HFLIP_MASK, MISENSOR_FLIP_DIS); + + dev->bpat = MT9M114_BPAT_BGBGGRGR; + } + + err += mt9m114_write_reg(c, MISENSOR_8BIT, 0x8404, 0x06); + udelay(10); + + return !!err; +} + +/* Vertically flip the image */ +static int mt9m114_t_vflip(struct v4l2_subdev *sd, int value) +{ + struct i2c_client *c = v4l2_get_subdevdata(sd); + int err; + /* set for direct mode */ + err = mt9m114_write_reg(c, MISENSOR_16BIT, 0x098E, 0xC850); + if (value >= 1) { + /* enable H flip - ctx A */ + err += misensor_rmw_reg(c, MISENSOR_8BIT, 0xC850, 0x02, 0x01); + err += misensor_rmw_reg(c, MISENSOR_8BIT, 0xC851, 0x02, 0x01); + /* ctx B */ + err += misensor_rmw_reg(c, MISENSOR_8BIT, 0xC888, 0x02, 0x01); + err += misensor_rmw_reg(c, MISENSOR_8BIT, 0xC889, 0x02, 0x01); + + err += misensor_rmw_reg(c, MISENSOR_16BIT, MISENSOR_READ_MODE, + MISENSOR_VFLIP_MASK, MISENSOR_FLIP_EN); + } else { + /* disable H flip - ctx A */ + err += misensor_rmw_reg(c, MISENSOR_8BIT, 0xC850, 0x02, 0x00); + err += misensor_rmw_reg(c, MISENSOR_8BIT, 0xC851, 0x02, 0x00); + /* ctx B */ + err += misensor_rmw_reg(c, MISENSOR_8BIT, 0xC888, 0x02, 0x00); + err += misensor_rmw_reg(c, MISENSOR_8BIT, 0xC889, 0x02, 0x00); + + err += misensor_rmw_reg(c, MISENSOR_16BIT, MISENSOR_READ_MODE, + MISENSOR_VFLIP_MASK, MISENSOR_FLIP_DIS); + } + + err += mt9m114_write_reg(c, MISENSOR_8BIT, 0x8404, 0x06); + udelay(10); + + return !!err; +} + +static int mt9m114_g_frame_interval(struct v4l2_subdev *sd, + struct v4l2_subdev_frame_interval *interval) +{ + struct mt9m114_device *dev = to_mt9m114_sensor(sd); + + interval->interval.numerator = 1; + interval->interval.denominator = mt9m114_res[dev->res].fps; + + return 0; +} + +static int mt9m114_s_stream(struct v4l2_subdev *sd, int enable) +{ + int ret; + struct i2c_client *c = v4l2_get_subdevdata(sd); + struct mt9m114_device *dev = to_mt9m114_sensor(sd); + struct atomisp_exposure exposure; + + if (enable) { + ret = mt9m114_write_reg_array(c, mt9m114_chgstat_reg, + POST_POLLING); + if (ret < 0) + return ret; + + if (dev->first_exp > MT9M114_MAX_FIRST_EXP) { + exposure.integration_time[0] = dev->first_exp; + exposure.gain[0] = dev->first_gain; + exposure.gain[1] = dev->first_diggain; + mt9m114_s_exposure(sd, &exposure); + } + dev->streamon = 1; + + } else { + dev->streamon = 0; + ret = mt9m114_set_suspend(sd); + } + + return ret; +} + +static int mt9m114_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_mbus_code_enum *code) +{ + if (code->index) + return -EINVAL; + code->code = MEDIA_BUS_FMT_SGRBG10_1X10; + + return 0; +} + +static int mt9m114_enum_frame_size(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_frame_size_enum *fse) +{ + unsigned int index = fse->index; + + if (index >= N_RES) + return -EINVAL; + + fse->min_width = mt9m114_res[index].width; + fse->min_height = mt9m114_res[index].height; + fse->max_width = mt9m114_res[index].width; + fse->max_height = mt9m114_res[index].height; + + return 0; +} + +static int mt9m114_g_skip_frames(struct v4l2_subdev *sd, u32 *frames) +{ + int index; + struct mt9m114_device *snr = to_mt9m114_sensor(sd); + + if (!frames) + return -EINVAL; + + for (index = 0; index < N_RES; index++) { + if (mt9m114_res[index].res == snr->res) + break; + } + + if (index >= N_RES) + return -EINVAL; + + *frames = mt9m114_res[index].skip_frames; + + return 0; +} + +static const struct v4l2_subdev_video_ops mt9m114_video_ops = { + .s_stream = mt9m114_s_stream, + .g_frame_interval = mt9m114_g_frame_interval, +}; + +static const struct v4l2_subdev_sensor_ops mt9m114_sensor_ops = { + .g_skip_frames = mt9m114_g_skip_frames, +}; + +static const struct v4l2_subdev_core_ops mt9m114_core_ops = { + .s_power = mt9m114_s_power, + .ioctl = mt9m114_ioctl, +}; + +/* REVISIT: Do we need pad operations? */ +static const struct v4l2_subdev_pad_ops mt9m114_pad_ops = { + .enum_mbus_code = mt9m114_enum_mbus_code, + .enum_frame_size = mt9m114_enum_frame_size, + .get_fmt = mt9m114_get_fmt, + .set_fmt = mt9m114_set_fmt, + .set_selection = mt9m114_s_exposure_selection, +}; + +static const struct v4l2_subdev_ops mt9m114_ops = { + .core = &mt9m114_core_ops, + .video = &mt9m114_video_ops, + .pad = &mt9m114_pad_ops, + .sensor = &mt9m114_sensor_ops, +}; + +static int mt9m114_remove(struct i2c_client *client) +{ + struct mt9m114_device *dev; + struct v4l2_subdev *sd = i2c_get_clientdata(client); + + dev = container_of(sd, struct mt9m114_device, sd); + dev->platform_data->csi_cfg(sd, 0); + v4l2_device_unregister_subdev(sd); + media_entity_cleanup(&dev->sd.entity); + v4l2_ctrl_handler_free(&dev->ctrl_handler); + kfree(dev); + return 0; +} + +static int mt9m114_probe(struct i2c_client *client) +{ + struct mt9m114_device *dev; + int ret = 0; + unsigned int i; + void *pdata; + acpi_handle handle; + struct acpi_device *adev; + + handle = ACPI_HANDLE(&client->dev); + if (!handle || acpi_bus_get_device(handle, &adev)) { + dev_err(&client->dev, "Error could not get ACPI device\n"); + return -ENODEV; + } + pr_info("%s: ACPI detected it on bus ID=%s, HID=%s\n", + __func__, acpi_device_bid(adev), acpi_device_hid(adev)); + // FIXME: may need to release resources allocated by acpi_bus_get_device() + + /* Setup sensor configuration structure */ + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (!dev) + return -ENOMEM; + + v4l2_i2c_subdev_init(&dev->sd, client, &mt9m114_ops); + pdata = gmin_camera_platform_data(&dev->sd, + ATOMISP_INPUT_FORMAT_RAW_10, + atomisp_bayer_order_grbg); + if (pdata) + ret = mt9m114_s_config(&dev->sd, client->irq, pdata); + if (!pdata || ret) { + v4l2_device_unregister_subdev(&dev->sd); + kfree(dev); + return ret; + } + + ret = atomisp_register_i2c_module(&dev->sd, pdata, RAW_CAMERA); + if (ret) { + v4l2_device_unregister_subdev(&dev->sd); + kfree(dev); + /* Coverity CID 298095 - return on error */ + return ret; + } + + /*TODO add format code here*/ + dev->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + dev->pad.flags = MEDIA_PAD_FL_SOURCE; + dev->format.code = MEDIA_BUS_FMT_SGRBG10_1X10; + dev->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR; + + ret = + v4l2_ctrl_handler_init(&dev->ctrl_handler, + ARRAY_SIZE(mt9m114_controls)); + if (ret) { + mt9m114_remove(client); + return ret; + } + + for (i = 0; i < ARRAY_SIZE(mt9m114_controls); i++) + v4l2_ctrl_new_custom(&dev->ctrl_handler, &mt9m114_controls[i], + NULL); + + if (dev->ctrl_handler.error) { + mt9m114_remove(client); + return dev->ctrl_handler.error; + } + + /* Use same lock for controls as for everything else. */ + dev->ctrl_handler.lock = &dev->input_lock; + dev->sd.ctrl_handler = &dev->ctrl_handler; + + /* REVISIT: Do we need media controller? */ + ret = media_entity_pads_init(&dev->sd.entity, 1, &dev->pad); + if (ret) { + mt9m114_remove(client); + return ret; + } + return 0; +} + +static const struct acpi_device_id mt9m114_acpi_match[] = { + { "INT33F0" }, + { "CRMT1040" }, + {}, +}; +MODULE_DEVICE_TABLE(acpi, mt9m114_acpi_match); + +static struct i2c_driver mt9m114_driver = { + .driver = { + .name = "mt9m114", + .acpi_match_table = mt9m114_acpi_match, + }, + .probe_new = mt9m114_probe, + .remove = mt9m114_remove, +}; +module_i2c_driver(mt9m114_driver); + +MODULE_AUTHOR("Shuguang Gong <Shuguang.gong@intel.com>"); +MODULE_LICENSE("GPL"); |