diff options
Diffstat (limited to 'drivers/staging/media/atomisp/pci/atomisp_v4l2.c')
-rw-r--r-- | drivers/staging/media/atomisp/pci/atomisp_v4l2.c | 1999 |
1 files changed, 1999 insertions, 0 deletions
diff --git a/drivers/staging/media/atomisp/pci/atomisp_v4l2.c b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c new file mode 100644 index 000000000000..694268d133c0 --- /dev/null +++ b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c @@ -0,0 +1,1999 @@ +/* + * Support for Medifield PNW Camera Imaging ISP subsystem. + * + * Copyright (c) 2010-2017 Intel Corporation. All Rights Reserved. + * + * Copyright (c) 2010 Silicon Hive www.siliconhive.com. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + */ +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/pm_runtime.h> +#include <linux/pm_qos.h> +#include <linux/timer.h> +#include <linux/delay.h> +#include <linux/dmi.h> +#include <linux/interrupt.h> + +#include <asm/iosf_mbi.h> + +#include "../../include/linux/atomisp_gmin_platform.h" + +#include "atomisp_cmd.h" +#include "atomisp_common.h" +#include "atomisp_fops.h" +#include "atomisp_file.h" +#include "atomisp_ioctl.h" +#include "atomisp_internal.h" +#include "atomisp_acc.h" +#include "atomisp-regs.h" +#include "atomisp_dfs_tables.h" +#include "atomisp_drvfs.h" +#include "hmm/hmm.h" +#include "atomisp_trace_event.h" + +#include "hrt/hive_isp_css_mm_hrt.h" + +#include "device_access.h" + +/* Timeouts to wait for all subdevs to be registered */ +#define SUBDEV_WAIT_TIMEOUT 50 /* ms */ +#define SUBDEV_WAIT_TIMEOUT_MAX_COUNT 40 /* up to 2 seconds */ + +/* G-Min addition: pull this in from intel_mid_pm.h */ +#define CSTATE_EXIT_LATENCY_C1 1 + +static uint skip_fwload; +module_param(skip_fwload, uint, 0644); +MODULE_PARM_DESC(skip_fwload, "Skip atomisp firmware load"); + +/* set reserved memory pool size in page */ +static unsigned int repool_pgnr; +module_param(repool_pgnr, uint, 0644); +MODULE_PARM_DESC(repool_pgnr, + "Set the reserved memory pool size in page (default:0)"); + +/* set dynamic memory pool size in page */ +unsigned int dypool_pgnr = UINT_MAX; +module_param(dypool_pgnr, uint, 0644); +MODULE_PARM_DESC(dypool_pgnr, + "Set the dynamic memory pool size in page (default:0)"); + +bool dypool_enable; +module_param(dypool_enable, bool, 0644); +MODULE_PARM_DESC(dypool_enable, + "dynamic memory pool enable/disable (default:disable)"); + +/* memory optimization: deferred firmware loading */ +bool defer_fw_load; +module_param(defer_fw_load, bool, 0644); +MODULE_PARM_DESC(defer_fw_load, + "Defer FW loading until device is opened (default:disable)"); + +/* cross componnet debug message flag */ +int dbg_level; +module_param(dbg_level, int, 0644); +MODULE_PARM_DESC(dbg_level, "debug message on/off (default:off)"); + +/* log function switch */ +int dbg_func = 2; +module_param(dbg_func, int, 0644); +MODULE_PARM_DESC(dbg_func, + "log function switch non/trace_printk/printk (default:printk)"); + +int mipicsi_flag; +module_param(mipicsi_flag, int, 0644); +MODULE_PARM_DESC(mipicsi_flag, "mipi csi compression predictor algorithm"); + +/*set to 16x16 since this is the amount of lines and pixels the sensor +exports extra. If these are kept at the 10x8 that they were on, in yuv +downscaling modes incorrect resolutions where requested to the sensor +driver with strange outcomes as a result. The proper way tot do this +would be to have a list of tables the specify the sensor res, mipi rec, +output res, and isp output res. however since we do not have this yet, +the chosen solution is the next best thing. */ +int pad_w = 16; +module_param(pad_w, int, 0644); +MODULE_PARM_DESC(pad_w, "extra data for ISP processing"); + +int pad_h = 16; +module_param(pad_h, int, 0644); +MODULE_PARM_DESC(pad_h, "extra data for ISP processing"); + +/* + * FIXME: this is a hack to make easier to support ISP2401 variant. + * As a given system will either be ISP2401 or not, we can just use + * a boolean, in order to replace existing #ifdef ISP2401 everywhere. + * + * Once this driver gets into a better shape, however, the best would + * be to replace this to something stored inside atomisp allocated + * structures. + */ +bool atomisp_hw_is_isp2401; + +/* Types of atomisp hardware */ +#define HW_IS_ISP2400 0 +#define HW_IS_ISP2401 1 + +struct device *atomisp_dev; + +void __iomem *atomisp_io_base; + +static const struct atomisp_freq_scaling_rule dfs_rules_merr[] = { + { + .width = ISP_FREQ_RULE_ANY, + .height = ISP_FREQ_RULE_ANY, + .fps = ISP_FREQ_RULE_ANY, + .isp_freq = ISP_FREQ_400MHZ, + .run_mode = ATOMISP_RUN_MODE_VIDEO, + }, + { + .width = ISP_FREQ_RULE_ANY, + .height = ISP_FREQ_RULE_ANY, + .fps = ISP_FREQ_RULE_ANY, + .isp_freq = ISP_FREQ_400MHZ, + .run_mode = ATOMISP_RUN_MODE_STILL_CAPTURE, + }, + { + .width = ISP_FREQ_RULE_ANY, + .height = ISP_FREQ_RULE_ANY, + .fps = ISP_FREQ_RULE_ANY, + .isp_freq = ISP_FREQ_400MHZ, + .run_mode = ATOMISP_RUN_MODE_CONTINUOUS_CAPTURE, + }, + { + .width = ISP_FREQ_RULE_ANY, + .height = ISP_FREQ_RULE_ANY, + .fps = ISP_FREQ_RULE_ANY, + .isp_freq = ISP_FREQ_400MHZ, + .run_mode = ATOMISP_RUN_MODE_PREVIEW, + }, + { + .width = ISP_FREQ_RULE_ANY, + .height = ISP_FREQ_RULE_ANY, + .fps = ISP_FREQ_RULE_ANY, + .isp_freq = ISP_FREQ_457MHZ, + .run_mode = ATOMISP_RUN_MODE_SDV, + }, +}; + +/* Merrifield and Moorefield DFS rules */ +static const struct atomisp_dfs_config dfs_config_merr = { + .lowest_freq = ISP_FREQ_200MHZ, + .max_freq_at_vmin = ISP_FREQ_400MHZ, + .highest_freq = ISP_FREQ_457MHZ, + .dfs_table = dfs_rules_merr, + .dfs_table_size = ARRAY_SIZE(dfs_rules_merr), +}; + +static const struct atomisp_freq_scaling_rule dfs_rules_merr_1179[] = { + { + .width = ISP_FREQ_RULE_ANY, + .height = ISP_FREQ_RULE_ANY, + .fps = ISP_FREQ_RULE_ANY, + .isp_freq = ISP_FREQ_400MHZ, + .run_mode = ATOMISP_RUN_MODE_VIDEO, + }, + { + .width = ISP_FREQ_RULE_ANY, + .height = ISP_FREQ_RULE_ANY, + .fps = ISP_FREQ_RULE_ANY, + .isp_freq = ISP_FREQ_400MHZ, + .run_mode = ATOMISP_RUN_MODE_STILL_CAPTURE, + }, + { + .width = ISP_FREQ_RULE_ANY, + .height = ISP_FREQ_RULE_ANY, + .fps = ISP_FREQ_RULE_ANY, + .isp_freq = ISP_FREQ_400MHZ, + .run_mode = ATOMISP_RUN_MODE_CONTINUOUS_CAPTURE, + }, + { + .width = ISP_FREQ_RULE_ANY, + .height = ISP_FREQ_RULE_ANY, + .fps = ISP_FREQ_RULE_ANY, + .isp_freq = ISP_FREQ_400MHZ, + .run_mode = ATOMISP_RUN_MODE_PREVIEW, + }, + { + .width = ISP_FREQ_RULE_ANY, + .height = ISP_FREQ_RULE_ANY, + .fps = ISP_FREQ_RULE_ANY, + .isp_freq = ISP_FREQ_400MHZ, + .run_mode = ATOMISP_RUN_MODE_SDV, + }, +}; + +static const struct atomisp_dfs_config dfs_config_merr_1179 = { + .lowest_freq = ISP_FREQ_200MHZ, + .max_freq_at_vmin = ISP_FREQ_400MHZ, + .highest_freq = ISP_FREQ_400MHZ, + .dfs_table = dfs_rules_merr_1179, + .dfs_table_size = ARRAY_SIZE(dfs_rules_merr_1179), +}; + +static const struct atomisp_freq_scaling_rule dfs_rules_merr_117a[] = { + { + .width = 1920, + .height = 1080, + .fps = 30, + .isp_freq = ISP_FREQ_266MHZ, + .run_mode = ATOMISP_RUN_MODE_VIDEO, + }, + { + .width = 1080, + .height = 1920, + .fps = 30, + .isp_freq = ISP_FREQ_266MHZ, + .run_mode = ATOMISP_RUN_MODE_VIDEO, + }, + { + .width = 1920, + .height = 1080, + .fps = 45, + .isp_freq = ISP_FREQ_320MHZ, + .run_mode = ATOMISP_RUN_MODE_VIDEO, + }, + { + .width = 1080, + .height = 1920, + .fps = 45, + .isp_freq = ISP_FREQ_320MHZ, + .run_mode = ATOMISP_RUN_MODE_VIDEO, + }, + { + .width = ISP_FREQ_RULE_ANY, + .height = ISP_FREQ_RULE_ANY, + .fps = 60, + .isp_freq = ISP_FREQ_356MHZ, + .run_mode = ATOMISP_RUN_MODE_VIDEO, + }, + { + .width = ISP_FREQ_RULE_ANY, + .height = ISP_FREQ_RULE_ANY, + .fps = ISP_FREQ_RULE_ANY, + .isp_freq = ISP_FREQ_200MHZ, + .run_mode = ATOMISP_RUN_MODE_VIDEO, + }, + { + .width = ISP_FREQ_RULE_ANY, + .height = ISP_FREQ_RULE_ANY, + .fps = ISP_FREQ_RULE_ANY, + .isp_freq = ISP_FREQ_400MHZ, + .run_mode = ATOMISP_RUN_MODE_STILL_CAPTURE, + }, + { + .width = ISP_FREQ_RULE_ANY, + .height = ISP_FREQ_RULE_ANY, + .fps = ISP_FREQ_RULE_ANY, + .isp_freq = ISP_FREQ_400MHZ, + .run_mode = ATOMISP_RUN_MODE_CONTINUOUS_CAPTURE, + }, + { + .width = ISP_FREQ_RULE_ANY, + .height = ISP_FREQ_RULE_ANY, + .fps = ISP_FREQ_RULE_ANY, + .isp_freq = ISP_FREQ_200MHZ, + .run_mode = ATOMISP_RUN_MODE_PREVIEW, + }, + { + .width = ISP_FREQ_RULE_ANY, + .height = ISP_FREQ_RULE_ANY, + .fps = ISP_FREQ_RULE_ANY, + .isp_freq = ISP_FREQ_400MHZ, + .run_mode = ATOMISP_RUN_MODE_SDV, + }, +}; + +static struct atomisp_dfs_config dfs_config_merr_117a = { + .lowest_freq = ISP_FREQ_200MHZ, + .max_freq_at_vmin = ISP_FREQ_200MHZ, + .highest_freq = ISP_FREQ_400MHZ, + .dfs_table = dfs_rules_merr_117a, + .dfs_table_size = ARRAY_SIZE(dfs_rules_merr_117a), +}; + +static const struct atomisp_freq_scaling_rule dfs_rules_byt[] = { + { + .width = ISP_FREQ_RULE_ANY, + .height = ISP_FREQ_RULE_ANY, + .fps = ISP_FREQ_RULE_ANY, + .isp_freq = ISP_FREQ_400MHZ, + .run_mode = ATOMISP_RUN_MODE_VIDEO, + }, + { + .width = ISP_FREQ_RULE_ANY, + .height = ISP_FREQ_RULE_ANY, + .fps = ISP_FREQ_RULE_ANY, + .isp_freq = ISP_FREQ_400MHZ, + .run_mode = ATOMISP_RUN_MODE_STILL_CAPTURE, + }, + { + .width = ISP_FREQ_RULE_ANY, + .height = ISP_FREQ_RULE_ANY, + .fps = ISP_FREQ_RULE_ANY, + .isp_freq = ISP_FREQ_400MHZ, + .run_mode = ATOMISP_RUN_MODE_CONTINUOUS_CAPTURE, + }, + { + .width = ISP_FREQ_RULE_ANY, + .height = ISP_FREQ_RULE_ANY, + .fps = ISP_FREQ_RULE_ANY, + .isp_freq = ISP_FREQ_400MHZ, + .run_mode = ATOMISP_RUN_MODE_PREVIEW, + }, + { + .width = ISP_FREQ_RULE_ANY, + .height = ISP_FREQ_RULE_ANY, + .fps = ISP_FREQ_RULE_ANY, + .isp_freq = ISP_FREQ_400MHZ, + .run_mode = ATOMISP_RUN_MODE_SDV, + }, +}; + +static const struct atomisp_dfs_config dfs_config_byt = { + .lowest_freq = ISP_FREQ_200MHZ, + .max_freq_at_vmin = ISP_FREQ_400MHZ, + .highest_freq = ISP_FREQ_400MHZ, + .dfs_table = dfs_rules_byt, + .dfs_table_size = ARRAY_SIZE(dfs_rules_byt), +}; + +static const struct atomisp_freq_scaling_rule dfs_rules_byt_cr[] = { + { + .width = ISP_FREQ_RULE_ANY, + .height = ISP_FREQ_RULE_ANY, + .fps = ISP_FREQ_RULE_ANY, + .isp_freq = ISP_FREQ_320MHZ, + .run_mode = ATOMISP_RUN_MODE_VIDEO, + }, + { + .width = ISP_FREQ_RULE_ANY, + .height = ISP_FREQ_RULE_ANY, + .fps = ISP_FREQ_RULE_ANY, + .isp_freq = ISP_FREQ_320MHZ, + .run_mode = ATOMISP_RUN_MODE_STILL_CAPTURE, + }, + { + .width = ISP_FREQ_RULE_ANY, + .height = ISP_FREQ_RULE_ANY, + .fps = ISP_FREQ_RULE_ANY, + .isp_freq = ISP_FREQ_320MHZ, + .run_mode = ATOMISP_RUN_MODE_CONTINUOUS_CAPTURE, + }, + { + .width = ISP_FREQ_RULE_ANY, + .height = ISP_FREQ_RULE_ANY, + .fps = ISP_FREQ_RULE_ANY, + .isp_freq = ISP_FREQ_320MHZ, + .run_mode = ATOMISP_RUN_MODE_PREVIEW, + }, + { + .width = ISP_FREQ_RULE_ANY, + .height = ISP_FREQ_RULE_ANY, + .fps = ISP_FREQ_RULE_ANY, + .isp_freq = ISP_FREQ_320MHZ, + .run_mode = ATOMISP_RUN_MODE_SDV, + }, +}; + +static const struct atomisp_dfs_config dfs_config_byt_cr = { + .lowest_freq = ISP_FREQ_200MHZ, + .max_freq_at_vmin = ISP_FREQ_320MHZ, + .highest_freq = ISP_FREQ_320MHZ, + .dfs_table = dfs_rules_byt_cr, + .dfs_table_size = ARRAY_SIZE(dfs_rules_byt_cr), +}; + +static const struct atomisp_freq_scaling_rule dfs_rules_cht[] = { + { + .width = ISP_FREQ_RULE_ANY, + .height = ISP_FREQ_RULE_ANY, + .fps = ISP_FREQ_RULE_ANY, + .isp_freq = ISP_FREQ_320MHZ, + .run_mode = ATOMISP_RUN_MODE_VIDEO, + }, + { + .width = ISP_FREQ_RULE_ANY, + .height = ISP_FREQ_RULE_ANY, + .fps = ISP_FREQ_RULE_ANY, + .isp_freq = ISP_FREQ_356MHZ, + .run_mode = ATOMISP_RUN_MODE_STILL_CAPTURE, + }, + { + .width = ISP_FREQ_RULE_ANY, + .height = ISP_FREQ_RULE_ANY, + .fps = ISP_FREQ_RULE_ANY, + .isp_freq = ISP_FREQ_320MHZ, + .run_mode = ATOMISP_RUN_MODE_CONTINUOUS_CAPTURE, + }, + { + .width = ISP_FREQ_RULE_ANY, + .height = ISP_FREQ_RULE_ANY, + .fps = ISP_FREQ_RULE_ANY, + .isp_freq = ISP_FREQ_320MHZ, + .run_mode = ATOMISP_RUN_MODE_PREVIEW, + }, + { + .width = 1280, + .height = 720, + .fps = ISP_FREQ_RULE_ANY, + .isp_freq = ISP_FREQ_320MHZ, + .run_mode = ATOMISP_RUN_MODE_SDV, + }, + { + .width = ISP_FREQ_RULE_ANY, + .height = ISP_FREQ_RULE_ANY, + .fps = ISP_FREQ_RULE_ANY, + .isp_freq = ISP_FREQ_356MHZ, + .run_mode = ATOMISP_RUN_MODE_SDV, + }, +}; + +static const struct atomisp_freq_scaling_rule dfs_rules_cht_soc[] = { + { + .width = ISP_FREQ_RULE_ANY, + .height = ISP_FREQ_RULE_ANY, + .fps = ISP_FREQ_RULE_ANY, + .isp_freq = ISP_FREQ_356MHZ, + .run_mode = ATOMISP_RUN_MODE_VIDEO, + }, + { + .width = ISP_FREQ_RULE_ANY, + .height = ISP_FREQ_RULE_ANY, + .fps = ISP_FREQ_RULE_ANY, + .isp_freq = ISP_FREQ_356MHZ, + .run_mode = ATOMISP_RUN_MODE_STILL_CAPTURE, + }, + { + .width = ISP_FREQ_RULE_ANY, + .height = ISP_FREQ_RULE_ANY, + .fps = ISP_FREQ_RULE_ANY, + .isp_freq = ISP_FREQ_320MHZ, + .run_mode = ATOMISP_RUN_MODE_CONTINUOUS_CAPTURE, + }, + { + .width = ISP_FREQ_RULE_ANY, + .height = ISP_FREQ_RULE_ANY, + .fps = ISP_FREQ_RULE_ANY, + .isp_freq = ISP_FREQ_320MHZ, + .run_mode = ATOMISP_RUN_MODE_PREVIEW, + }, + { + .width = ISP_FREQ_RULE_ANY, + .height = ISP_FREQ_RULE_ANY, + .fps = ISP_FREQ_RULE_ANY, + .isp_freq = ISP_FREQ_356MHZ, + .run_mode = ATOMISP_RUN_MODE_SDV, + }, +}; + +static const struct atomisp_dfs_config dfs_config_cht = { + .lowest_freq = ISP_FREQ_100MHZ, + .max_freq_at_vmin = ISP_FREQ_356MHZ, + .highest_freq = ISP_FREQ_356MHZ, + .dfs_table = dfs_rules_cht, + .dfs_table_size = ARRAY_SIZE(dfs_rules_cht), +}; + +/* This one should be visible also by atomisp_cmd.c */ +const struct atomisp_dfs_config dfs_config_cht_soc = { + .lowest_freq = ISP_FREQ_100MHZ, + .max_freq_at_vmin = ISP_FREQ_356MHZ, + .highest_freq = ISP_FREQ_356MHZ, + .dfs_table = dfs_rules_cht_soc, + .dfs_table_size = ARRAY_SIZE(dfs_rules_cht_soc), +}; + +int atomisp_video_init(struct atomisp_video_pipe *video, const char *name) +{ + int ret; + const char *direction; + + switch (video->type) { + case V4L2_BUF_TYPE_VIDEO_CAPTURE: + direction = "output"; + video->pad.flags = MEDIA_PAD_FL_SINK; + video->vdev.fops = &atomisp_fops; + video->vdev.ioctl_ops = &atomisp_ioctl_ops; + break; + case V4L2_BUF_TYPE_VIDEO_OUTPUT: + direction = "input"; + video->pad.flags = MEDIA_PAD_FL_SOURCE; + video->vdev.fops = &atomisp_file_fops; + video->vdev.ioctl_ops = &atomisp_file_ioctl_ops; + break; + default: + return -EINVAL; + } + + ret = media_entity_pads_init(&video->vdev.entity, 1, &video->pad); + if (ret < 0) + return ret; + + /* Initialize the video device. */ + snprintf(video->vdev.name, sizeof(video->vdev.name), + "ATOMISP ISP %s %s", name, direction); + video->vdev.release = video_device_release_empty; + video_set_drvdata(&video->vdev, video->isp); + + return 0; +} + +void atomisp_acc_init(struct atomisp_acc_pipe *video, const char *name) +{ + video->vdev.fops = &atomisp_fops; + video->vdev.ioctl_ops = &atomisp_ioctl_ops; + + /* Initialize the video device. */ + snprintf(video->vdev.name, sizeof(video->vdev.name), + "ATOMISP ISP %s", name); + video->vdev.release = video_device_release_empty; + video_set_drvdata(&video->vdev, video->isp); +} + +void atomisp_video_unregister(struct atomisp_video_pipe *video) +{ + if (video_is_registered(&video->vdev)) { + media_entity_cleanup(&video->vdev.entity); + video_unregister_device(&video->vdev); + } +} + +void atomisp_acc_unregister(struct atomisp_acc_pipe *video) +{ + if (video_is_registered(&video->vdev)) + video_unregister_device(&video->vdev); +} + +static int atomisp_save_iunit_reg(struct atomisp_device *isp) +{ + struct pci_dev *dev = isp->pdev; + + dev_dbg(isp->dev, "%s\n", __func__); + + pci_read_config_word(dev, PCI_COMMAND, &isp->saved_regs.pcicmdsts); + /* isp->saved_regs.ispmmadr is set from the atomisp_pci_probe() */ + pci_read_config_dword(dev, PCI_MSI_CAPID, &isp->saved_regs.msicap); + pci_read_config_dword(dev, PCI_MSI_ADDR, &isp->saved_regs.msi_addr); + pci_read_config_word(dev, PCI_MSI_DATA, &isp->saved_regs.msi_data); + pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &isp->saved_regs.intr); + pci_read_config_dword(dev, PCI_INTERRUPT_CTRL, + &isp->saved_regs.interrupt_control); + + pci_read_config_dword(dev, MRFLD_PCI_PMCS, + &isp->saved_regs.pmcs); + /* Ensure read/write combining is enabled. */ + pci_read_config_dword(dev, PCI_I_CONTROL, + &isp->saved_regs.i_control); + isp->saved_regs.i_control |= + MRFLD_PCI_I_CONTROL_ENABLE_READ_COMBINING | + MRFLD_PCI_I_CONTROL_ENABLE_WRITE_COMBINING; + pci_read_config_dword(dev, MRFLD_PCI_CSI_ACCESS_CTRL_VIOL, + &isp->saved_regs.csi_access_viol); + pci_read_config_dword(dev, MRFLD_PCI_CSI_RCOMP_CONTROL, + &isp->saved_regs.csi_rcomp_config); + /* + * Hardware bugs require setting CSI_HS_OVR_CLK_GATE_ON_UPDATE. + * ANN/CHV: RCOMP updates do not happen when using CSI2+ path + * and sensor sending "continuous clock". + * TNG/ANN/CHV: MIPI packets are lost if the HS entry sequence + * is missed, and IUNIT can hang. + * For both issues, setting this bit is a workaround. + */ + isp->saved_regs.csi_rcomp_config |= + MRFLD_PCI_CSI_HS_OVR_CLK_GATE_ON_UPDATE; + pci_read_config_dword(dev, MRFLD_PCI_CSI_AFE_TRIM_CONTROL, + &isp->saved_regs.csi_afe_dly); + pci_read_config_dword(dev, MRFLD_PCI_CSI_CONTROL, + &isp->saved_regs.csi_control); + if (isp->media_dev.hw_revision >= + (ATOMISP_HW_REVISION_ISP2401 << ATOMISP_HW_REVISION_SHIFT)) + isp->saved_regs.csi_control |= + MRFLD_PCI_CSI_CONTROL_PARPATHEN; + /* + * On CHT CSI_READY bit should be enabled before stream on + */ + if (IS_CHT && (isp->media_dev.hw_revision >= ((ATOMISP_HW_REVISION_ISP2401 << + ATOMISP_HW_REVISION_SHIFT) | ATOMISP_HW_STEPPING_B0))) + isp->saved_regs.csi_control |= + MRFLD_PCI_CSI_CONTROL_CSI_READY; + pci_read_config_dword(dev, MRFLD_PCI_CSI_AFE_RCOMP_CONTROL, + &isp->saved_regs.csi_afe_rcomp_config); + pci_read_config_dword(dev, MRFLD_PCI_CSI_AFE_HS_CONTROL, + &isp->saved_regs.csi_afe_hs_control); + pci_read_config_dword(dev, MRFLD_PCI_CSI_DEADLINE_CONTROL, + &isp->saved_regs.csi_deadline_control); + return 0; +} + +static int __maybe_unused atomisp_restore_iunit_reg(struct atomisp_device *isp) +{ + struct pci_dev *dev = isp->pdev; + + dev_dbg(isp->dev, "%s\n", __func__); + + pci_write_config_word(dev, PCI_COMMAND, isp->saved_regs.pcicmdsts); + pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, + isp->saved_regs.ispmmadr); + pci_write_config_dword(dev, PCI_MSI_CAPID, isp->saved_regs.msicap); + pci_write_config_dword(dev, PCI_MSI_ADDR, isp->saved_regs.msi_addr); + pci_write_config_word(dev, PCI_MSI_DATA, isp->saved_regs.msi_data); + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, isp->saved_regs.intr); + pci_write_config_dword(dev, PCI_INTERRUPT_CTRL, + isp->saved_regs.interrupt_control); + pci_write_config_dword(dev, PCI_I_CONTROL, + isp->saved_regs.i_control); + + pci_write_config_dword(dev, MRFLD_PCI_PMCS, + isp->saved_regs.pmcs); + pci_write_config_dword(dev, MRFLD_PCI_CSI_ACCESS_CTRL_VIOL, + isp->saved_regs.csi_access_viol); + pci_write_config_dword(dev, MRFLD_PCI_CSI_RCOMP_CONTROL, + isp->saved_regs.csi_rcomp_config); + pci_write_config_dword(dev, MRFLD_PCI_CSI_AFE_TRIM_CONTROL, + isp->saved_regs.csi_afe_dly); + pci_write_config_dword(dev, MRFLD_PCI_CSI_CONTROL, + isp->saved_regs.csi_control); + pci_write_config_dword(dev, MRFLD_PCI_CSI_AFE_RCOMP_CONTROL, + isp->saved_regs.csi_afe_rcomp_config); + pci_write_config_dword(dev, MRFLD_PCI_CSI_AFE_HS_CONTROL, + isp->saved_regs.csi_afe_hs_control); + pci_write_config_dword(dev, MRFLD_PCI_CSI_DEADLINE_CONTROL, + isp->saved_regs.csi_deadline_control); + + /* + * for MRFLD, Software/firmware needs to write a 1 to bit0 + * of the register at CSI_RECEIVER_SELECTION_REG to enable + * SH CSI backend write 0 will enable Arasan CSI backend, + * which has bugs(like sighting:4567697 and 4567699) and + * will be removed in B0 + */ + atomisp_store_uint32(MRFLD_CSI_RECEIVER_SELECTION_REG, 1); + return 0; +} + +static int atomisp_mrfld_pre_power_down(struct atomisp_device *isp) +{ + struct pci_dev *dev = isp->pdev; + u32 irq; + unsigned long flags; + + spin_lock_irqsave(&isp->lock, flags); + if (isp->sw_contex.power_state == ATOM_ISP_POWER_DOWN) { + spin_unlock_irqrestore(&isp->lock, flags); + dev_dbg(isp->dev, "<%s %d.\n", __func__, __LINE__); + return 0; + } + /* + * MRFLD HAS requirement: cannot power off i-unit if + * ISP has IRQ not serviced. + * So, here we need to check if there is any pending + * IRQ, if so, waiting for it to be served + */ + pci_read_config_dword(dev, PCI_INTERRUPT_CTRL, &irq); + irq = irq & 1 << INTR_IIR; + pci_write_config_dword(dev, PCI_INTERRUPT_CTRL, irq); + + pci_read_config_dword(dev, PCI_INTERRUPT_CTRL, &irq); + if (!(irq & (1 << INTR_IIR))) + goto done; + + atomisp_store_uint32(MRFLD_INTR_CLEAR_REG, 0xFFFFFFFF); + atomisp_load_uint32(MRFLD_INTR_STATUS_REG, &irq); + if (irq != 0) { + dev_err(isp->dev, + "%s: fail to clear isp interrupt status reg=0x%x\n", + __func__, irq); + spin_unlock_irqrestore(&isp->lock, flags); + return -EAGAIN; + } else { + pci_read_config_dword(dev, PCI_INTERRUPT_CTRL, &irq); + irq = irq & 1 << INTR_IIR; + pci_write_config_dword(dev, PCI_INTERRUPT_CTRL, irq); + + pci_read_config_dword(dev, PCI_INTERRUPT_CTRL, &irq); + if (!(irq & (1 << INTR_IIR))) { + atomisp_store_uint32(MRFLD_INTR_ENABLE_REG, 0x0); + goto done; + } + dev_err(isp->dev, + "%s: error in iunit interrupt. status reg=0x%x\n", + __func__, irq); + spin_unlock_irqrestore(&isp->lock, flags); + return -EAGAIN; + } +done: + /* + * MRFLD WORKAROUND: + * before powering off IUNIT, clear the pending interrupts + * and disable the interrupt. driver should avoid writing 0 + * to IIR. It could block subsequent interrupt messages. + * HW sighting:4568410. + */ + pci_read_config_dword(dev, PCI_INTERRUPT_CTRL, &irq); + irq &= ~(1 << INTR_IER); + pci_write_config_dword(dev, PCI_INTERRUPT_CTRL, irq); + + atomisp_msi_irq_uninit(isp, dev); + atomisp_freq_scaling(isp, ATOMISP_DFS_MODE_LOW, true); + spin_unlock_irqrestore(&isp->lock, flags); + + return 0; +} + +/* +* WA for DDR DVFS enable/disable +* By default, ISP will force DDR DVFS 1600MHz before disable DVFS +*/ +static void punit_ddr_dvfs_enable(bool enable) +{ + int door_bell = 1 << 8; + int max_wait = 30; + int reg; + + iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ, MRFLD_ISPSSDVFS, ®); + if (enable) { + reg &= ~(MRFLD_BIT0 | MRFLD_BIT1); + } else { + reg |= (MRFLD_BIT1 | door_bell); + reg &= ~(MRFLD_BIT0); + } + iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE, MRFLD_ISPSSDVFS, reg); + + /* Check Req_ACK to see freq status, wait until door_bell is cleared */ + while ((reg & door_bell) && max_wait--) { + iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ, MRFLD_ISPSSDVFS, ®); + usleep_range(100, 500); + } + + if (max_wait == -1) + pr_info("DDR DVFS, door bell is not cleared within 3ms\n"); +} + +static int atomisp_mrfld_power(struct atomisp_device *isp, bool enable) +{ + unsigned long timeout; + u32 val = enable ? MRFLD_ISPSSPM0_IUNIT_POWER_ON : + MRFLD_ISPSSPM0_IUNIT_POWER_OFF; + + dev_dbg(isp->dev, "IUNIT power-%s.\n", enable ? "on" : "off"); + + /*WA:Enable DVFS*/ + if (IS_CHT && enable) + punit_ddr_dvfs_enable(true); + + /* + * FIXME:WA for ECS28A, with this sleep, CTS + * android.hardware.camera2.cts.CameraDeviceTest#testCameraDeviceAbort + * PASS, no impact on other platforms + */ + if (IS_BYT && enable) + msleep(10); + + /* Write to ISPSSPM0 bit[1:0] to power on/off the IUNIT */ + iosf_mbi_modify(BT_MBI_UNIT_PMC, MBI_REG_READ, MRFLD_ISPSSPM0, + val, MRFLD_ISPSSPM0_ISPSSC_MASK); + + /*WA:Enable DVFS*/ + if (IS_CHT && !enable) + punit_ddr_dvfs_enable(true); + + /* + * There should be no IUNIT access while power-down is + * in progress. HW sighting: 4567865. + * Wait up to 50 ms for the IUNIT to shut down. + * And we do the same for power on. + */ + timeout = jiffies + msecs_to_jiffies(50); + do { + u32 tmp; + + /* Wait until ISPSSPM0 bit[25:24] shows the right value */ + iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ, MRFLD_ISPSSPM0, &tmp); + tmp = (tmp & MRFLD_ISPSSPM0_ISPSSC_MASK) >> MRFLD_ISPSSPM0_ISPSSS_OFFSET; + if (tmp == val) { + trace_ipu_cstate(enable); + return 0; + } + + if (time_after(jiffies, timeout)) + break; + + /* FIXME: experienced value for delay */ + usleep_range(100, 150); + } while (1); + + if (enable) + msleep(10); + + dev_err(isp->dev, "IUNIT power-%s timeout.\n", enable ? "on" : "off"); + return -EBUSY; +} + +/* Workaround for pmu_nc_set_power_state not ready in MRFLD */ +int atomisp_mrfld_power_down(struct atomisp_device *isp) +{ + return 0; +// FIXME: at least with ISP2401, the code below causes the driver to break +// return atomisp_mrfld_power(isp, false); +} + +/* Workaround for pmu_nc_set_power_state not ready in MRFLD */ +int atomisp_mrfld_power_up(struct atomisp_device *isp) +{ + return 0; +// FIXME: at least with ISP2401, the code below causes the driver to break +// return atomisp_mrfld_power(isp, true); +} + +int atomisp_runtime_suspend(struct device *dev) +{ + struct atomisp_device *isp = (struct atomisp_device *) + dev_get_drvdata(dev); + int ret; + + ret = atomisp_mrfld_pre_power_down(isp); + if (ret) + return ret; + + /*Turn off the ISP d-phy*/ + ret = atomisp_ospm_dphy_down(isp); + if (ret) + return ret; + cpu_latency_qos_update_request(&isp->pm_qos, PM_QOS_DEFAULT_VALUE); + return atomisp_mrfld_power_down(isp); +} + +int atomisp_runtime_resume(struct device *dev) +{ + struct atomisp_device *isp = (struct atomisp_device *) + dev_get_drvdata(dev); + int ret; + + ret = atomisp_mrfld_power_up(isp); + if (ret) + return ret; + + cpu_latency_qos_update_request(&isp->pm_qos, isp->max_isr_latency); + if (isp->sw_contex.power_state == ATOM_ISP_POWER_DOWN) { + /*Turn on ISP d-phy */ + ret = atomisp_ospm_dphy_up(isp); + if (ret) { + dev_err(isp->dev, "Failed to power up ISP!.\n"); + return -EINVAL; + } + } + + /*restore register values for iUnit and iUnitPHY registers*/ + if (isp->saved_regs.pcicmdsts) + atomisp_restore_iunit_reg(isp); + + atomisp_freq_scaling(isp, ATOMISP_DFS_MODE_LOW, true); + return 0; +} + +static int __maybe_unused atomisp_suspend(struct device *dev) +{ + struct atomisp_device *isp = (struct atomisp_device *) + dev_get_drvdata(dev); + /* FIXME: only has one isp_subdev at present */ + struct atomisp_sub_device *asd = &isp->asd[0]; + unsigned long flags; + int ret; + + /* + * FIXME: Suspend is not supported by sensors. Abort if any video + * node was opened. + */ + if (atomisp_dev_users(isp)) + return -EBUSY; + + spin_lock_irqsave(&isp->lock, flags); + if (asd->streaming != ATOMISP_DEVICE_STREAMING_DISABLED) { + spin_unlock_irqrestore(&isp->lock, flags); + dev_err(isp->dev, "atomisp cannot suspend at this time.\n"); + return -EINVAL; + } + spin_unlock_irqrestore(&isp->lock, flags); + + ret = atomisp_mrfld_pre_power_down(isp); + if (ret) + return ret; + + /*Turn off the ISP d-phy */ + ret = atomisp_ospm_dphy_down(isp); + if (ret) { + dev_err(isp->dev, "fail to power off ISP\n"); + return ret; + } + cpu_latency_qos_update_request(&isp->pm_qos, PM_QOS_DEFAULT_VALUE); + return atomisp_mrfld_power_down(isp); +} + +static int __maybe_unused atomisp_resume(struct device *dev) +{ + struct atomisp_device *isp = (struct atomisp_device *) + dev_get_drvdata(dev); + int ret; + + ret = atomisp_mrfld_power_up(isp); + if (ret) + return ret; + + cpu_latency_qos_update_request(&isp->pm_qos, isp->max_isr_latency); + + /*Turn on ISP d-phy */ + ret = atomisp_ospm_dphy_up(isp); + if (ret) { + dev_err(isp->dev, "Failed to power up ISP!.\n"); + return -EINVAL; + } + + /*restore register values for iUnit and iUnitPHY registers*/ + if (isp->saved_regs.pcicmdsts) + atomisp_restore_iunit_reg(isp); + + atomisp_freq_scaling(isp, ATOMISP_DFS_MODE_LOW, true); + return 0; +} + +int atomisp_csi_lane_config(struct atomisp_device *isp) +{ + static const struct { + u8 code; + u8 lanes[MRFLD_PORT_NUM]; + } portconfigs[] = { + /* Tangier/Merrifield available lane configurations */ + { 0x00, { 4, 1, 0 } }, /* 00000 */ + { 0x01, { 3, 1, 0 } }, /* 00001 */ + { 0x02, { 2, 1, 0 } }, /* 00010 */ + { 0x03, { 1, 1, 0 } }, /* 00011 */ + { 0x04, { 2, 1, 2 } }, /* 00100 */ + { 0x08, { 3, 1, 1 } }, /* 01000 */ + { 0x09, { 2, 1, 1 } }, /* 01001 */ + { 0x0a, { 1, 1, 1 } }, /* 01010 */ + + /* Anniedale/Moorefield only configurations */ + { 0x10, { 4, 2, 0 } }, /* 10000 */ + { 0x11, { 3, 2, 0 } }, /* 10001 */ + { 0x12, { 2, 2, 0 } }, /* 10010 */ + { 0x13, { 1, 2, 0 } }, /* 10011 */ + { 0x14, { 2, 2, 2 } }, /* 10100 */ + { 0x18, { 3, 2, 1 } }, /* 11000 */ + { 0x19, { 2, 2, 1 } }, /* 11001 */ + { 0x1a, { 1, 2, 1 } }, /* 11010 */ + }; + + unsigned int i, j; + u8 sensor_lanes[MRFLD_PORT_NUM] = { 0 }; + u32 csi_control; + int nportconfigs; + u32 port_config_mask; + int port3_lanes_shift; + + if (isp->media_dev.hw_revision < + ATOMISP_HW_REVISION_ISP2401_LEGACY << + ATOMISP_HW_REVISION_SHIFT) { + /* Merrifield */ + port_config_mask = MRFLD_PORT_CONFIG_MASK; + port3_lanes_shift = MRFLD_PORT3_LANES_SHIFT; + } else { + /* Moorefield / Cherryview */ + port_config_mask = CHV_PORT_CONFIG_MASK; + port3_lanes_shift = CHV_PORT3_LANES_SHIFT; + } + + if (isp->media_dev.hw_revision < + ATOMISP_HW_REVISION_ISP2401 << + ATOMISP_HW_REVISION_SHIFT) { + /* Merrifield / Moorefield legacy input system */ + nportconfigs = MRFLD_PORT_CONFIG_NUM; + } else { + /* Moorefield / Cherryview new input system */ + nportconfigs = ARRAY_SIZE(portconfigs); + } + + for (i = 0; i < isp->input_cnt; i++) { + struct camera_mipi_info *mipi_info; + + if (isp->inputs[i].type != RAW_CAMERA && + isp->inputs[i].type != SOC_CAMERA) + continue; + + mipi_info = atomisp_to_sensor_mipi_info(isp->inputs[i].camera); + if (!mipi_info) + continue; + + switch (mipi_info->port) { + case ATOMISP_CAMERA_PORT_PRIMARY: + sensor_lanes[0] = mipi_info->num_lanes; + break; + case ATOMISP_CAMERA_PORT_SECONDARY: + sensor_lanes[1] = mipi_info->num_lanes; + break; + case ATOMISP_CAMERA_PORT_TERTIARY: + sensor_lanes[2] = mipi_info->num_lanes; + break; + default: + dev_err(isp->dev, + "%s: invalid port: %d for the %dth sensor\n", + __func__, mipi_info->port, i); + return -EINVAL; + } + } + + for (i = 0; i < nportconfigs; i++) { + for (j = 0; j < MRFLD_PORT_NUM; j++) + if (sensor_lanes[j] && + sensor_lanes[j] != portconfigs[i].lanes[j]) + break; + + if (j == MRFLD_PORT_NUM) + break; /* Found matching setting */ + } + + if (i >= nportconfigs) { + dev_err(isp->dev, + "%s: could not find the CSI port setting for %d-%d-%d\n", + __func__, + sensor_lanes[0], sensor_lanes[1], sensor_lanes[2]); + return -EINVAL; + } + + pci_read_config_dword(isp->pdev, MRFLD_PCI_CSI_CONTROL, &csi_control); + csi_control &= ~port_config_mask; + csi_control |= (portconfigs[i].code << MRFLD_PORT_CONFIGCODE_SHIFT) + | (portconfigs[i].lanes[0] ? 0 : (1 << MRFLD_PORT1_ENABLE_SHIFT)) + | (portconfigs[i].lanes[1] ? 0 : (1 << MRFLD_PORT2_ENABLE_SHIFT)) + | (portconfigs[i].lanes[2] ? 0 : (1 << MRFLD_PORT3_ENABLE_SHIFT)) + | (((1 << portconfigs[i].lanes[0]) - 1) << MRFLD_PORT1_LANES_SHIFT) + | (((1 << portconfigs[i].lanes[1]) - 1) << MRFLD_PORT2_LANES_SHIFT) + | (((1 << portconfigs[i].lanes[2]) - 1) << port3_lanes_shift); + + pci_write_config_dword(isp->pdev, MRFLD_PCI_CSI_CONTROL, csi_control); + + dev_dbg(isp->dev, + "%s: the portconfig is %d-%d-%d, CSI_CONTROL is 0x%08X\n", + __func__, portconfigs[i].lanes[0], portconfigs[i].lanes[1], + portconfigs[i].lanes[2], csi_control); + + return 0; +} + +static int atomisp_subdev_probe(struct atomisp_device *isp) +{ + const struct atomisp_platform_data *pdata; + struct intel_v4l2_subdev_table *subdevs; + int ret, raw_index = -1, count; + + pdata = atomisp_get_platform_data(); + if (!pdata) { + dev_err(isp->dev, "no platform data available\n"); + return 0; + } + + /* FIXME: should return -EPROBE_DEFER if not all subdevs were probed */ + for (count = 0; count < SUBDEV_WAIT_TIMEOUT_MAX_COUNT; count++) { + int camera_count = 0; + for (subdevs = pdata->subdevs; subdevs->type; ++subdevs) { + if (subdevs->type == RAW_CAMERA || + subdevs->type == SOC_CAMERA) + camera_count ++; + } + if (camera_count) + break; + msleep(SUBDEV_WAIT_TIMEOUT); + count++; + } + /* Wait more time to give more time for subdev init code to finish */ + msleep(5 * SUBDEV_WAIT_TIMEOUT); + + /* FIXME: should, instead, use I2C probe */ + + for (subdevs = pdata->subdevs; subdevs->type; ++subdevs) { + struct v4l2_subdev *subdev; + struct i2c_board_info *board_info = + &subdevs->v4l2_subdev.board_info; + struct i2c_adapter *adapter = + i2c_get_adapter(subdevs->v4l2_subdev.i2c_adapter_id); + int sensor_num, i; + + dev_info(isp->dev, "Probing Subdev %s\n", board_info->type); + + if (!adapter) { + dev_err(isp->dev, + "Failed to find i2c adapter for subdev %s\n", + board_info->type); + break; + } + + /* In G-Min, the sensor devices will already be probed + * (via ACPI) and registered, do not create new + * ones */ + subdev = atomisp_gmin_find_subdev(adapter, board_info); + if (!subdev) { + dev_warn(isp->dev, "Subdev %s not found\n", + board_info->type); + continue; + } + ret = v4l2_device_register_subdev(&isp->v4l2_dev, subdev); + if (ret) { + dev_warn(isp->dev, "Subdev %s detection fail\n", + board_info->type); + continue; + } + + if (!subdev) { + dev_warn(isp->dev, "Subdev %s detection fail\n", + board_info->type); + continue; + } + + dev_info(isp->dev, "Subdev %s successfully register\n", + board_info->type); + + switch (subdevs->type) { + case RAW_CAMERA: + raw_index = isp->input_cnt; + dev_dbg(isp->dev, "raw_index: %d\n", raw_index); + /* pass-though */ + case SOC_CAMERA: + dev_dbg(isp->dev, "SOC_INDEX: %d\n", isp->input_cnt); + if (isp->input_cnt >= ATOM_ISP_MAX_INPUTS) { + dev_warn(isp->dev, + "too many atomisp inputs, ignored\n"); + break; + } + + isp->inputs[isp->input_cnt].type = subdevs->type; + isp->inputs[isp->input_cnt].port = subdevs->port; + isp->inputs[isp->input_cnt].camera = subdev; + isp->inputs[isp->input_cnt].sensor_index = 0; + /* + * initialize the subdev frame size, then next we can + * judge whether frame_size store effective value via + * pixel_format. + */ + isp->inputs[isp->input_cnt].frame_size.pixel_format = 0; + isp->inputs[isp->input_cnt].camera_caps = + atomisp_get_default_camera_caps(); + sensor_num = isp->inputs[isp->input_cnt] + .camera_caps->sensor_num; + isp->input_cnt++; + for (i = 1; i < sensor_num; i++) { + if (isp->input_cnt >= ATOM_ISP_MAX_INPUTS) { + dev_warn(isp->dev, + "atomisp inputs out of range\n"); + break; + } + isp->inputs[isp->input_cnt] = + isp->inputs[isp->input_cnt - 1]; + isp->inputs[isp->input_cnt].sensor_index = i; + isp->input_cnt++; + } + break; + case CAMERA_MOTOR: + if (isp->motor) { + dev_warn(isp->dev, + "too many atomisp motors, ignored %s\n", + board_info->type); + continue; + } + isp->motor = subdev; + break; + case LED_FLASH: + case XENON_FLASH: + if (isp->flash) { + dev_warn(isp->dev, + "too many atomisp flash devices, ignored %s\n", + board_info->type); + continue; + } + isp->flash = subdev; + break; + default: + dev_dbg(isp->dev, "unknown subdev probed\n"); + break; + } + } + + /* + * HACK: Currently VCM belongs to primary sensor only, but correct + * approach must be to acquire from platform code which sensor + * owns it. + */ + if (isp->motor && raw_index >= 0) + isp->inputs[raw_index].motor = isp->motor; + + /* Proceed even if no modules detected. For COS mode and no modules. */ + if (!isp->input_cnt) + dev_warn(isp->dev, "no camera attached or fail to detect\n"); + else + dev_info(isp->dev, "detected %d camera sensors\n", + isp->input_cnt); + + return atomisp_csi_lane_config(isp); +} + +static void atomisp_unregister_entities(struct atomisp_device *isp) +{ + unsigned int i; + struct v4l2_subdev *sd, *next; + + for (i = 0; i < isp->num_of_streams; i++) + atomisp_subdev_unregister_entities(&isp->asd[i]); + atomisp_tpg_unregister_entities(&isp->tpg); + atomisp_file_input_unregister_entities(&isp->file_dev); + for (i = 0; i < ATOMISP_CAMERA_NR_PORTS; i++) + atomisp_mipi_csi2_unregister_entities(&isp->csi2_port[i]); + + list_for_each_entry_safe(sd, next, &isp->v4l2_dev.subdevs, list) + v4l2_device_unregister_subdev(sd); + + v4l2_device_unregister(&isp->v4l2_dev); + media_device_unregister(&isp->media_dev); +} + +static int atomisp_register_entities(struct atomisp_device *isp) +{ + int ret = 0; + unsigned int i; + + isp->media_dev.dev = isp->dev; + + strlcpy(isp->media_dev.model, "Intel Atom ISP", + sizeof(isp->media_dev.model)); + + media_device_init(&isp->media_dev); + isp->v4l2_dev.mdev = &isp->media_dev; + ret = v4l2_device_register(isp->dev, &isp->v4l2_dev); + if (ret < 0) { + dev_err(isp->dev, "%s: V4L2 device registration failed (%d)\n", + __func__, ret); + goto v4l2_device_failed; + } + + ret = atomisp_subdev_probe(isp); + if (ret < 0) + goto csi_and_subdev_probe_failed; + + /* Register internal entities */ + for (i = 0; i < ATOMISP_CAMERA_NR_PORTS; i++) { + ret = atomisp_mipi_csi2_register_entities(&isp->csi2_port[i], + &isp->v4l2_dev); + if (ret == 0) + continue; + + /* error case */ + dev_err(isp->dev, "failed to register the CSI port: %d\n", i); + /* deregister all registered CSI ports */ + while (i--) + atomisp_mipi_csi2_unregister_entities( + &isp->csi2_port[i]); + + goto csi_and_subdev_probe_failed; + } + + ret = + atomisp_file_input_register_entities(&isp->file_dev, &isp->v4l2_dev); + if (ret < 0) { + dev_err(isp->dev, "atomisp_file_input_register_entities\n"); + goto file_input_register_failed; + } + + ret = atomisp_tpg_register_entities(&isp->tpg, &isp->v4l2_dev); + if (ret < 0) { + dev_err(isp->dev, "atomisp_tpg_register_entities\n"); + goto tpg_register_failed; + } + + for (i = 0; i < isp->num_of_streams; i++) { + struct atomisp_sub_device *asd = &isp->asd[i]; + + ret = atomisp_subdev_register_entities(asd, &isp->v4l2_dev); + if (ret < 0) { + dev_err(isp->dev, + "atomisp_subdev_register_entities fail\n"); + for (; i > 0; i--) + atomisp_subdev_unregister_entities( + &isp->asd[i - 1]); + goto subdev_register_failed; + } + } + + for (i = 0; i < isp->num_of_streams; i++) { + struct atomisp_sub_device *asd = &isp->asd[i]; + + init_completion(&asd->init_done); + + asd->delayed_init_workq = + alloc_workqueue(isp->v4l2_dev.name, WQ_CPU_INTENSIVE, + 1); + if (!asd->delayed_init_workq) { + dev_err(isp->dev, + "Failed to initialize delayed init workq\n"); + ret = -ENOMEM; + + for (; i > 0; i--) + destroy_workqueue(isp->asd[i - 1]. + delayed_init_workq); + goto wq_alloc_failed; + } + INIT_WORK(&asd->delayed_init_work, atomisp_delayed_init_work); + } + + for (i = 0; i < isp->input_cnt; i++) { + if (isp->inputs[i].port >= ATOMISP_CAMERA_NR_PORTS) { + dev_err(isp->dev, "isp->inputs port %d not supported\n", + isp->inputs[i].port); + ret = -EINVAL; + goto link_failed; + } + } + + dev_dbg(isp->dev, + "FILE_INPUT enable, camera_cnt: %d\n", isp->input_cnt); + isp->inputs[isp->input_cnt].type = FILE_INPUT; + isp->inputs[isp->input_cnt].port = -1; + isp->inputs[isp->input_cnt].camera_caps = + atomisp_get_default_camera_caps(); + isp->inputs[isp->input_cnt++].camera = &isp->file_dev.sd; + + if (isp->input_cnt < ATOM_ISP_MAX_INPUTS) { + dev_dbg(isp->dev, + "TPG detected, camera_cnt: %d\n", isp->input_cnt); + isp->inputs[isp->input_cnt].type = TEST_PATTERN; + isp->inputs[isp->input_cnt].port = -1; + isp->inputs[isp->input_cnt].camera_caps = + atomisp_get_default_camera_caps(); + isp->inputs[isp->input_cnt++].camera = &isp->tpg.sd; + } else { + dev_warn(isp->dev, "too many atomisp inputs, TPG ignored.\n"); + } + + ret = v4l2_device_register_subdev_nodes(&isp->v4l2_dev); + if (ret < 0) + goto link_failed; + + return media_device_register(&isp->media_dev); + +link_failed: + for (i = 0; i < isp->num_of_streams; i++) + destroy_workqueue(isp->asd[i]. + delayed_init_workq); +wq_alloc_failed: + for (i = 0; i < isp->num_of_streams; i++) + atomisp_subdev_unregister_entities( + &isp->asd[i]); +subdev_register_failed: + atomisp_tpg_unregister_entities(&isp->tpg); +tpg_register_failed: + atomisp_file_input_unregister_entities(&isp->file_dev); +file_input_register_failed: + for (i = 0; i < ATOMISP_CAMERA_NR_PORTS; i++) + atomisp_mipi_csi2_unregister_entities(&isp->csi2_port[i]); +csi_and_subdev_probe_failed: + v4l2_device_unregister(&isp->v4l2_dev); +v4l2_device_failed: + media_device_unregister(&isp->media_dev); + media_device_cleanup(&isp->media_dev); + return ret; +} + +static int atomisp_initialize_modules(struct atomisp_device *isp) +{ + int ret; + + ret = atomisp_mipi_csi2_init(isp); + if (ret < 0) { + dev_err(isp->dev, "mipi csi2 initialization failed\n"); + goto error_mipi_csi2; + } + + ret = atomisp_file_input_init(isp); + if (ret < 0) { + dev_err(isp->dev, + "file input device initialization failed\n"); + goto error_file_input; + } + + ret = atomisp_tpg_init(isp); + if (ret < 0) { + dev_err(isp->dev, "tpg initialization failed\n"); + goto error_tpg; + } + + ret = atomisp_subdev_init(isp); + if (ret < 0) { + dev_err(isp->dev, "ISP subdev initialization failed\n"); + goto error_isp_subdev; + } + + return 0; + +error_isp_subdev: +error_tpg: + atomisp_tpg_cleanup(isp); +error_file_input: + atomisp_file_input_cleanup(isp); +error_mipi_csi2: + atomisp_mipi_csi2_cleanup(isp); + return ret; +} + +static void atomisp_uninitialize_modules(struct atomisp_device *isp) +{ + atomisp_tpg_cleanup(isp); + atomisp_file_input_cleanup(isp); + atomisp_mipi_csi2_cleanup(isp); +} + +const struct firmware * +atomisp_load_firmware(struct atomisp_device *isp) +{ + const struct firmware *fw; + int rc; + char *fw_path = NULL; + + if (skip_fwload) + return NULL; + + if ((isp->media_dev.hw_revision >> ATOMISP_HW_REVISION_SHIFT) + == ATOMISP_HW_REVISION_ISP2401) + fw_path = "shisp_2401a0_v21.bin"; + + if (isp->media_dev.hw_revision == + ((ATOMISP_HW_REVISION_ISP2401_LEGACY << ATOMISP_HW_REVISION_SHIFT) + | ATOMISP_HW_STEPPING_A0)) + fw_path = "shisp_2401a0_legacy_v21.bin"; + + if (isp->media_dev.hw_revision == + ((ATOMISP_HW_REVISION_ISP2400 << ATOMISP_HW_REVISION_SHIFT) + | ATOMISP_HW_STEPPING_B0)) + fw_path = "shisp_2400b0_v21.bin"; + + if (!fw_path) { + dev_err(isp->dev, "Unsupported hw_revision 0x%x\n", + isp->media_dev.hw_revision); + return NULL; + } + + rc = request_firmware(&fw, fw_path, isp->dev); + if (rc) { + dev_err(isp->dev, + "atomisp: Error %d while requesting firmware %s\n", + rc, fw_path); + return NULL; + } + + return fw; +} + +/* + * Check for flags the driver was compiled with against the PCI + * device. Always returns true on other than ISP 2400. + */ +static bool is_valid_device(struct pci_dev *dev, + const struct pci_device_id *id) +{ + unsigned int a0_max_id = 0; + const char *name; + const char *product; + + product = dmi_get_system_info(DMI_PRODUCT_NAME); + + switch (id->device & ATOMISP_PCI_DEVICE_SOC_MASK) { + case ATOMISP_PCI_DEVICE_SOC_MRFLD: + a0_max_id = ATOMISP_PCI_REV_MRFLD_A0_MAX; + atomisp_hw_is_isp2401 = false; + name = "Merrifield"; + break; + case ATOMISP_PCI_DEVICE_SOC_BYT: + a0_max_id = ATOMISP_PCI_REV_BYT_A0_MAX; + atomisp_hw_is_isp2401 = false; + name = "Baytrail"; + break; + case ATOMISP_PCI_DEVICE_SOC_ANN: + name = "Anniedale"; + atomisp_hw_is_isp2401 = true; + break; + case ATOMISP_PCI_DEVICE_SOC_CHT: + name = "Cherrytrail"; + atomisp_hw_is_isp2401 = true; + break; + default: + dev_err(&dev->dev, "%s: unknown device ID %x04:%x04\n", + product, id->vendor, id->device); + return false; + } + + if (dev->revision <= ATOMISP_PCI_REV_BYT_A0_MAX) { + dev_err(&dev->dev, "%s revision %d is not unsupported\n", + name, dev->revision); + return false; + } + + /* + * FIXME: + * remove the if once the driver become generic + */ + +#if defined(ISP2400) + if (atomisp_hw_is_isp2401) { + dev_err(&dev->dev, "Support for %s (ISP2401) was disabled at compile time\n", + name); + return false; + } +#else + if (!atomisp_hw_is_isp2401) { + dev_err(&dev->dev, "Support for %s (ISP2400) was disabled at compile time\n", + name); + return false; + } +#endif + + dev_info(&dev->dev, "Detected %s version %d (ISP240%c) on %s\n", + name, dev->revision, + atomisp_hw_is_isp2401 ? '1' : '0', + product); + + return true; +} + +static int init_atomisp_wdts(struct atomisp_device *isp) +{ + int i, err; + + atomic_set(&isp->wdt_work_queued, 0); + isp->wdt_work_queue = alloc_workqueue(isp->v4l2_dev.name, 0, 1); + if (!isp->wdt_work_queue) { + dev_err(isp->dev, "Failed to initialize wdt work queue\n"); + err = -ENOMEM; + goto alloc_fail; + } + INIT_WORK(&isp->wdt_work, atomisp_wdt_work); + + for (i = 0; i < isp->num_of_streams; i++) { + struct atomisp_sub_device *asd = &isp->asd[i]; + if (!atomisp_hw_is_isp2401) + timer_setup(&asd->wdt, atomisp_wdt, 0); + else { + timer_setup(&asd->video_out_capture.wdt, + atomisp_wdt, 0); + timer_setup(&asd->video_out_preview.wdt, + atomisp_wdt, 0); + timer_setup(&asd->video_out_vf.wdt, atomisp_wdt, 0); + timer_setup(&asd->video_out_video_capture.wdt, + atomisp_wdt, 0); + } + } + return 0; +alloc_fail: + return err; +} + +#define ATOM_ISP_PCI_BAR 0 + +static int atomisp_pci_probe(struct pci_dev *dev, + const struct pci_device_id *id) +{ + const struct atomisp_platform_data *pdata; + struct atomisp_device *isp; + unsigned int start; + void __iomem *base; + int err, val; + u32 irq; + + if (!is_valid_device(dev, id)) + return -ENODEV; + + /* Pointer to struct device. */ + atomisp_dev = &dev->dev; + + pdata = atomisp_get_platform_data(); + if (!pdata) + dev_warn(&dev->dev, "no platform data available\n"); + + err = pcim_enable_device(dev); + if (err) { + dev_err(&dev->dev, "Failed to enable CI ISP device (%d)\n", + err); + return err; + } + + start = pci_resource_start(dev, ATOM_ISP_PCI_BAR); + dev_dbg(&dev->dev, "start: 0x%x\n", start); + + err = pcim_iomap_regions(dev, 1 << ATOM_ISP_PCI_BAR, pci_name(dev)); + if (err) { + dev_err(&dev->dev, "Failed to I/O memory remapping (%d)\n", + err); + goto ioremap_fail; + } + + base = pcim_iomap_table(dev)[ATOM_ISP_PCI_BAR]; + dev_dbg(&dev->dev, "base: %p\n", base); + + atomisp_io_base = base; + + dev_dbg(&dev->dev, "atomisp_io_base: %p\n", atomisp_io_base); + + isp = devm_kzalloc(&dev->dev, sizeof(struct atomisp_device), GFP_KERNEL); + if (!isp) { + err = -ENOMEM; + goto atomisp_dev_alloc_fail; + } + isp->pdev = dev; + isp->dev = &dev->dev; + isp->sw_contex.power_state = ATOM_ISP_POWER_UP; + isp->saved_regs.ispmmadr = start; + + rt_mutex_init(&isp->mutex); + mutex_init(&isp->streamoff_mutex); + spin_lock_init(&isp->lock); + + /* This is not a true PCI device on SoC, so the delay is not needed. */ + isp->pdev->d3_delay = 0; + + switch (id->device & ATOMISP_PCI_DEVICE_SOC_MASK) { + case ATOMISP_PCI_DEVICE_SOC_MRFLD: + isp->media_dev.hw_revision = + (ATOMISP_HW_REVISION_ISP2400 + << ATOMISP_HW_REVISION_SHIFT) | + ATOMISP_HW_STEPPING_B0; + + switch (id->device) { + case ATOMISP_PCI_DEVICE_SOC_MRFLD_1179: + isp->dfs = &dfs_config_merr_1179; + break; + case ATOMISP_PCI_DEVICE_SOC_MRFLD_117A: + isp->dfs = &dfs_config_merr_117a; + + break; + default: + isp->dfs = &dfs_config_merr; + break; + } + isp->hpll_freq = HPLL_FREQ_1600MHZ; + break; + case ATOMISP_PCI_DEVICE_SOC_BYT: + isp->media_dev.hw_revision = + (ATOMISP_HW_REVISION_ISP2400 + << ATOMISP_HW_REVISION_SHIFT) | + ATOMISP_HW_STEPPING_B0; +#ifdef FIXME + if (INTEL_MID_BOARD(3, TABLET, BYT, BLK, PRO, CRV2) || + INTEL_MID_BOARD(3, TABLET, BYT, BLK, ENG, CRV2)) { + isp->dfs = &dfs_config_byt_cr; + isp->hpll_freq = HPLL_FREQ_2000MHZ; + } else +#endif + { + isp->dfs = &dfs_config_byt; + isp->hpll_freq = HPLL_FREQ_1600MHZ; + } + /* HPLL frequency is known to be device-specific, but we don't + * have specs yet for exactly how it varies. Default to + * BYT-CR but let provisioning set it via EFI variable */ + isp->hpll_freq = gmin_get_var_int(&dev->dev, false, "HpllFreq", + HPLL_FREQ_2000MHZ); + + /* + * for BYT/CHT we are put isp into D3cold to avoid pci registers access + * in power off. Set d3cold_delay to 0 since default 100ms is not + * necessary. + */ + isp->pdev->d3cold_delay = 0; + break; + case ATOMISP_PCI_DEVICE_SOC_ANN: + isp->media_dev.hw_revision = ( +#ifdef ISP2401_NEW_INPUT_SYSTEM + ATOMISP_HW_REVISION_ISP2401 +#else + ATOMISP_HW_REVISION_ISP2401_LEGACY +#endif + << ATOMISP_HW_REVISION_SHIFT); + isp->media_dev.hw_revision |= isp->pdev->revision < 2 ? + ATOMISP_HW_STEPPING_A0 : ATOMISP_HW_STEPPING_B0; + isp->dfs = &dfs_config_merr; + isp->hpll_freq = HPLL_FREQ_1600MHZ; + break; + case ATOMISP_PCI_DEVICE_SOC_CHT: + isp->media_dev.hw_revision = ( +#ifdef ISP2401_NEW_INPUT_SYSTEM + ATOMISP_HW_REVISION_ISP2401 +#else + ATOMISP_HW_REVISION_ISP2401_LEGACY +#endif + << ATOMISP_HW_REVISION_SHIFT); + isp->media_dev.hw_revision |= isp->pdev->revision < 2 ? + ATOMISP_HW_STEPPING_A0 : ATOMISP_HW_STEPPING_B0; + + isp->dfs = &dfs_config_cht; + isp->pdev->d3cold_delay = 0; + + iosf_mbi_read(CCK_PORT, MBI_REG_READ, CCK_FUSE_REG_0, &val); + switch (val & CCK_FUSE_HPLL_FREQ_MASK) { + case 0x00: + isp->hpll_freq = HPLL_FREQ_800MHZ; + break; + case 0x01: + isp->hpll_freq = HPLL_FREQ_1600MHZ; + break; + case 0x02: + isp->hpll_freq = HPLL_FREQ_2000MHZ; + break; + default: + isp->hpll_freq = HPLL_FREQ_1600MHZ; + dev_warn(isp->dev, + "read HPLL from cck failed.default 1600MHz.\n"); + } + break; + default: + dev_err(&dev->dev, "un-supported IUNIT device\n"); + err = -ENODEV; + goto atomisp_dev_alloc_fail; + } + + dev_info(&dev->dev, "ISP HPLL frequency base = %d MHz\n", + isp->hpll_freq); + + isp->max_isr_latency = ATOMISP_MAX_ISR_LATENCY; + + /* Load isp firmware from user space */ + if (!defer_fw_load) { + isp->firmware = atomisp_load_firmware(isp); + if (!isp->firmware) { + err = -ENOENT; + dev_dbg(&dev->dev, "Firmware load failed\n"); + goto load_fw_fail; + } + + err = atomisp_css_check_firmware_version(isp); + if (err) { + dev_dbg(&dev->dev, "Firmware version check failed\n"); + goto fw_validation_fail; + } + } else { + dev_info(&dev->dev, "Firmware load will be deferred\n"); + } + + pci_set_master(dev); + pci_set_drvdata(dev, isp); + + err = pci_enable_msi(dev); + if (err) { + dev_err(&dev->dev, "Failed to enable msi (%d)\n", err); + goto enable_msi_fail; + } + + atomisp_msi_irq_init(isp, dev); + + cpu_latency_qos_add_request(&isp->pm_qos, PM_QOS_DEFAULT_VALUE); + + /* + * for MRFLD, Software/firmware needs to write a 1 to bit 0 of + * the register at CSI_RECEIVER_SELECTION_REG to enable SH CSI + * backend write 0 will enable Arasan CSI backend, which has + * bugs(like sighting:4567697 and 4567699) and will be removed + * in B0 + */ + atomisp_store_uint32(MRFLD_CSI_RECEIVER_SELECTION_REG, 1); + + if ((id->device & ATOMISP_PCI_DEVICE_SOC_MASK) == + ATOMISP_PCI_DEVICE_SOC_MRFLD) { + u32 csi_afe_trim; + + /* + * Workaround for imbalance data eye issue which is observed + * on TNG B0. + */ + pci_read_config_dword(dev, MRFLD_PCI_CSI_AFE_TRIM_CONTROL, + &csi_afe_trim); + csi_afe_trim &= ~((MRFLD_PCI_CSI_HSRXCLKTRIM_MASK << + MRFLD_PCI_CSI1_HSRXCLKTRIM_SHIFT) | + (MRFLD_PCI_CSI_HSRXCLKTRIM_MASK << + MRFLD_PCI_CSI2_HSRXCLKTRIM_SHIFT) | + (MRFLD_PCI_CSI_HSRXCLKTRIM_MASK << + MRFLD_PCI_CSI3_HSRXCLKTRIM_SHIFT)); + csi_afe_trim |= (MRFLD_PCI_CSI1_HSRXCLKTRIM << + MRFLD_PCI_CSI1_HSRXCLKTRIM_SHIFT) | + (MRFLD_PCI_CSI2_HSRXCLKTRIM << + MRFLD_PCI_CSI2_HSRXCLKTRIM_SHIFT) | + (MRFLD_PCI_CSI3_HSRXCLKTRIM << + MRFLD_PCI_CSI3_HSRXCLKTRIM_SHIFT); + pci_write_config_dword(dev, MRFLD_PCI_CSI_AFE_TRIM_CONTROL, + csi_afe_trim); + } + + err = atomisp_initialize_modules(isp); + if (err < 0) { + dev_err(&dev->dev, "atomisp_initialize_modules (%d)\n", err); + goto initialize_modules_fail; + } + + err = atomisp_register_entities(isp); + if (err < 0) { + dev_err(&dev->dev, "atomisp_register_entities failed (%d)\n", + err); + goto register_entities_fail; + } + err = atomisp_create_pads_links(isp); + if (err < 0) + goto register_entities_fail; + /* init atomisp wdts */ + if (init_atomisp_wdts(isp) != 0) + goto wdt_work_queue_fail; + + /* save the iunit context only once after all the values are init'ed. */ + atomisp_save_iunit_reg(isp); + + pm_runtime_put_noidle(&dev->dev); + pm_runtime_allow(&dev->dev); + + hmm_init_mem_stat(repool_pgnr, dypool_enable, dypool_pgnr); + err = hmm_pool_register(repool_pgnr, HMM_POOL_TYPE_RESERVED); + if (err) { + dev_err(&dev->dev, "Failed to register reserved memory pool.\n"); + goto hmm_pool_fail; + } + + /* Init ISP memory management */ + hmm_init(); + + err = devm_request_threaded_irq(&dev->dev, dev->irq, + atomisp_isr, atomisp_isr_thread, + IRQF_SHARED, "isp_irq", isp); + if (err) { + dev_err(&dev->dev, "Failed to request irq (%d)\n", err); + goto request_irq_fail; + } + + /* Load firmware into ISP memory */ + if (!defer_fw_load) { + err = atomisp_css_load_firmware(isp); + if (err) { + dev_err(&dev->dev, "Failed to init css.\n"); + goto css_init_fail; + } + } else { + dev_dbg(&dev->dev, "Skip css init.\n"); + } + /* Clear FW image from memory */ + release_firmware(isp->firmware); + isp->firmware = NULL; + isp->css_env.isp_css_fw.data = NULL; + + atomisp_drvfs_init(&dev->driver->driver, isp); + + return 0; + +css_init_fail: + devm_free_irq(&dev->dev, dev->irq, isp); +request_irq_fail: + hmm_cleanup(); + hmm_pool_unregister(HMM_POOL_TYPE_RESERVED); +hmm_pool_fail: + destroy_workqueue(isp->wdt_work_queue); +wdt_work_queue_fail: + atomisp_acc_cleanup(isp); + atomisp_unregister_entities(isp); +register_entities_fail: + atomisp_uninitialize_modules(isp); +initialize_modules_fail: + cpu_latency_qos_remove_request(&isp->pm_qos); + atomisp_msi_irq_uninit(isp, dev); + pci_disable_msi(dev); +enable_msi_fail: +fw_validation_fail: + release_firmware(isp->firmware); +load_fw_fail: + /* + * Switch off ISP, as keeping it powered on would prevent + * reaching S0ix states. + * + * The following lines have been copied from atomisp suspend path + */ + + pci_read_config_dword(dev, PCI_INTERRUPT_CTRL, &irq); + irq = irq & 1 << INTR_IIR; + pci_write_config_dword(dev, PCI_INTERRUPT_CTRL, irq); + + pci_read_config_dword(dev, PCI_INTERRUPT_CTRL, &irq); + irq &= ~(1 << INTR_IER); + pci_write_config_dword(dev, PCI_INTERRUPT_CTRL, irq); + + atomisp_msi_irq_uninit(isp, dev); + + atomisp_ospm_dphy_down(isp); + + /* Address later when we worry about the ...field chips */ + if (IS_ENABLED(CONFIG_PM) && atomisp_mrfld_power_down(isp)) + dev_err(&dev->dev, "Failed to switch off ISP\n"); + +atomisp_dev_alloc_fail: + pcim_iounmap_regions(dev, 1 << ATOM_ISP_PCI_BAR); + +ioremap_fail: + return err; +} + +static void atomisp_pci_remove(struct pci_dev *dev) +{ + struct atomisp_device *isp = (struct atomisp_device *) + pci_get_drvdata(dev); + + dev_info(&dev->dev, "Removing atomisp driver\n"); + + atomisp_drvfs_exit(); + + atomisp_acc_cleanup(isp); + + atomisp_css_unload_firmware(isp); + hmm_cleanup(); + + pm_runtime_forbid(&dev->dev); + pm_runtime_get_noresume(&dev->dev); + cpu_latency_qos_remove_request(&isp->pm_qos); + + atomisp_msi_irq_uninit(isp, dev); + atomisp_unregister_entities(isp); + + destroy_workqueue(isp->wdt_work_queue); + atomisp_file_input_cleanup(isp); + + release_firmware(isp->firmware); + + hmm_pool_unregister(HMM_POOL_TYPE_RESERVED); +} + +static const struct pci_device_id atomisp_pci_tbl[] = { + /* Merrifield */ + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, ATOMISP_PCI_DEVICE_SOC_MRFLD)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, ATOMISP_PCI_DEVICE_SOC_MRFLD_1179)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, ATOMISP_PCI_DEVICE_SOC_MRFLD_117A)}, + /* Baytrail */ + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, ATOMISP_PCI_DEVICE_SOC_BYT)}, + /* Anniedale (Merrifield+ / Moorefield) */ + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, ATOMISP_PCI_DEVICE_SOC_ANN)}, + /* Cherrytrail */ + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, ATOMISP_PCI_DEVICE_SOC_CHT)}, + {0,} +}; + +MODULE_DEVICE_TABLE(pci, atomisp_pci_tbl); + +static const struct dev_pm_ops atomisp_pm_ops = { + .runtime_suspend = atomisp_runtime_suspend, + .runtime_resume = atomisp_runtime_resume, + .suspend = atomisp_suspend, + .resume = atomisp_resume, +}; + +static struct pci_driver atomisp_pci_driver = { + .driver = { + .pm = &atomisp_pm_ops, + }, + .name = "atomisp-isp2", + .id_table = atomisp_pci_tbl, + .probe = atomisp_pci_probe, + .remove = atomisp_pci_remove, +}; + +module_pci_driver(atomisp_pci_driver); + +MODULE_AUTHOR("Wen Wang <wen.w.wang@intel.com>"); +MODULE_AUTHOR("Xiaolin Zhang <xiaolin.zhang@intel.com>"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Intel ATOM Platform ISP Driver"); |