diff options
Diffstat (limited to 'drivers/staging/r8188eu/include/rtl8188e_hal.h')
-rw-r--r-- | drivers/staging/r8188eu/include/rtl8188e_hal.h | 100 |
1 files changed, 17 insertions, 83 deletions
diff --git a/drivers/staging/r8188eu/include/rtl8188e_hal.h b/drivers/staging/r8188eu/include/rtl8188e_hal.h index d7db1dfc39d0..8134a173ea07 100644 --- a/drivers/staging/r8188eu/include/rtl8188e_hal.h +++ b/drivers/staging/r8188eu/include/rtl8188e_hal.h @@ -13,11 +13,18 @@ #include "rtl8188e_recv.h" #include "rtl8188e_xmit.h" #include "rtl8188e_cmd.h" -#include "Hal8188EPwrSeq.h" -#include "rtl8188e_sreset.h" #include "rtw_efuse.h" - -#include "odm_precomp.h" +#include "odm_types.h" +#include "odm.h" +#include "odm_HWConfig.h" +#include "odm_RegDefine11N.h" +#include "HalPhyRf_8188e.h" +#include "Hal8188ERateAdaptive.h" +#include "HalHWImg8188E_MAC.h" +#include "HalHWImg8188E_RF.h" +#include "HalHWImg8188E_BB.h" +#include "odm_RegConfig8188E.h" +#include "odm_RTL8188E.h" /* RTL8188E Power Configuration CMDs for USB/SDIO interfaces */ #define Rtl8188E_NIC_PWR_ON_FLOW rtl8188E_power_on_flow @@ -168,42 +175,15 @@ struct hal_data_8188e { u16 BasicRateSet; - /* rf_ctrl */ - u8 rf_chip; - u8 rf_type; - - u8 BoardType; - - /* EEPROM setting. */ - u16 EEPROMVID; - u16 EEPROMPID; - u16 EEPROMSVID; - u16 EEPROMSDID; - u8 EEPROMCustomerID; - u8 EEPROMSubCustomerID; - u8 EEPROMVersion; u8 EEPROMRegulatory; - - u8 bTXPowerDataReadFromEEPORM; u8 EEPROMThermalMeter; - u8 bAPKThermalMeterIgnore; - - bool EepromOrEfuse; - struct efuse_hal EfuseHal; - u8 Index24G_CCK_Base[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; - u8 Index24G_BW40_Base[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; + u8 Index24G_CCK_Base[CHANNEL_MAX_NUMBER]; + u8 Index24G_BW40_Base[CHANNEL_MAX_NUMBER]; /* If only one tx, only BW20 and OFDM are used. */ - s8 CCK_24G_Diff[RF_PATH_MAX][MAX_TX_COUNT]; - s8 OFDM_24G_Diff[RF_PATH_MAX][MAX_TX_COUNT]; - s8 BW20_24G_Diff[RF_PATH_MAX][MAX_TX_COUNT]; - s8 BW40_24G_Diff[RF_PATH_MAX][MAX_TX_COUNT]; - - u8 TxPwrLevelCck[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; - /* For HT 40MHZ pwr */ - u8 TxPwrLevelHT40_1S[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; - /* For HT 40MHZ pwr */ - u8 TxPwrLevelHT40_2S[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; + s8 OFDM_24G_Diff[MAX_TX_COUNT]; + s8 BW20_24G_Diff[MAX_TX_COUNT]; + /* HT 20<->40 Pwr diff */ u8 TxPwrHt20Diff[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; /* For HT<->legacy pwr diff */ @@ -212,7 +192,6 @@ struct hal_data_8188e { u8 PwrGroupHT20[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; u8 PwrGroupHT40[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; - u8 LegacyHTTxPowerDiff;/* Legacy to HT rate power diff */ /* The current Tx Power Level */ u8 CurrentCckTxPwrIdx; u8 CurrentOfdm24GTxPwrIdx; @@ -220,32 +199,18 @@ struct hal_data_8188e { u8 CurrentBW4024GTxPwrIdx; /* Read/write are allow for following hardware information variables */ - u8 framesync; - u32 framesyncC34; - u8 framesyncMonitor; - u8 DefaultInitialGain[4]; u8 pwrGroupCnt; u32 MCSTxPowerLevelOriginalOffset[MAX_PG_GROUP][16]; - u32 CCKTxPowerLevelOriginalOffset; u8 CrystalCap; - u32 AntennaTxPath; /* Antenna path Tx */ - u32 AntennaRxPath; /* Antenna path Rx */ u8 ExternalPA; - u8 bLedOpenDrain; /* Open-drain support for controlling the LED.*/ - - u8 b1x1RecvCombine; /* for 1T1R receive combining */ - u32 AcParam_BE; /* Original parameter for BE, use for EDCA turbo. */ - struct bb_reg_def PHYRegDef[4]; /* Radio A/B/C/D */ + struct bb_reg_def PHYRegDef[2]; /* Radio A/B */ u32 RfRegChnlVal[2]; - /* RDG enable */ - bool bRDGEnable; - /* for host message to fw */ u8 LastHMEBoxNum; @@ -263,26 +228,10 @@ struct hal_data_8188e { u8 bDumpRxPkt;/* for debug */ u8 bDumpTxPkt;/* for debug */ - u8 FwRsvdPageStartOffset; /* Reserve page start offset except - * beacon in TxQ. */ - - /* 2010/08/09 MH Add CU power down mode. */ - bool pwrdown; - - /* Add for dual MAC 0--Mac0 1--Mac1 */ - u32 interfaceIndex; u8 OutEpQueueSel; u8 OutEpNumber; - /* Add for USB aggreation mode dynamic shceme. */ - bool UsbRxHighSpeedMode; - - /* 2010/11/22 MH Add for slim combo debug mode selective. */ - /* This is used for fix the drawback of CU TSMC-A/UMC-A cut. - * HW auto suspend ability. Close BT clock. */ - bool SlimComboDbg; - u16 EfuseUsedBytes; struct P2P_PS_Offload_t p2p_ps_offload; @@ -293,12 +242,8 @@ struct hal_data_8188e { u32 UsbBulkOutSize; - /* Interrupt relatd register information. */ - u32 IntArray[3];/* HISR0,HISR1,HSISR */ - u8 C2hArray[16]; u8 UsbTxAggMode; u8 UsbTxAggDescNum; - u32 MaxUsbRxAggBlock; enum usb_rx_agg_mode UsbRxAggMode; u8 UsbRxAggBlockCount; /* USB Block count. Block size is @@ -309,9 +254,6 @@ struct hal_data_8188e { u8 UsbRxAggPageTimeout; }; -#define GET_HAL_DATA(__pAdapter) \ - ((struct hal_data_8188e *)((__pAdapter)->HalData)) - /* rtl8188e_hal_init.c */ s32 rtl8188e_FirmwareDownload(struct adapter *padapter); void _8051Reset88E(struct adapter *padapter); @@ -321,25 +263,18 @@ s32 InitLLTTable(struct adapter *padapter, u8 txpktbuf_bndy); /* EFuse */ u8 GetEEPROMSize8188E(struct adapter *padapter); -void Hal_InitPGData88E(struct adapter *padapter); void Hal_EfuseParseIDCode88E(struct adapter *padapter, u8 *hwinfo); void Hal_ReadTxPowerInfo88E(struct adapter *padapter, u8 *hwinfo, bool AutoLoadFail); -void Hal_EfuseParseEEPROMVer88E(struct adapter *padapter, u8 *hwinfo, - bool AutoLoadFail); void rtl8188e_EfuseParseChnlPlan(struct adapter *padapter, u8 *hwinfo, bool AutoLoadFail); -void Hal_EfuseParseCustomerID88E(struct adapter *padapter, u8 *hwinfo, - bool AutoLoadFail); void Hal_ReadAntennaDiversity88E(struct adapter *pAdapter,u8 *PROMContent, bool AutoLoadFail); void Hal_ReadThermalMeter_88E(struct adapter * dapter, u8 *PROMContent, bool AutoloadFail); void Hal_EfuseParseXtal_8188E(struct adapter *pAdapter, u8 *hwinfo, bool AutoLoadFail); -void Hal_EfuseParseBoardType88E(struct adapter *pAdapter, u8 *hwinfo, - bool AutoLoadFail); void Hal_ReadPowerSavingMode88E(struct adapter *pAdapter, u8 *hwinfo, bool AutoLoadFail); @@ -347,6 +282,5 @@ void rtl8188e_read_chip_version(struct adapter *padapter); s32 rtl8188e_iol_efuse_patch(struct adapter *padapter); void rtw_cancel_all_timer(struct adapter *padapter); -void _ps_open_RF(struct adapter *adapt); #endif /* __RTL8188E_HAL_H__ */ |