diff options
Diffstat (limited to 'drivers/usb/dwc3/gadget.c')
| -rw-r--r-- | drivers/usb/dwc3/gadget.c | 42 |
1 files changed, 33 insertions, 9 deletions
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 80c3ef134e41..e44bfc3b5096 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -2,7 +2,7 @@ /* * gadget.c - DesignWare USB3 DRD Controller Gadget Framework Link * - * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com + * Copyright (C) 2010-2011 Texas Instruments Incorporated - https://www.ti.com * * Authors: Felipe Balbi <balbi@ti.com>, * Sebastian Andrzej Siewior <bigeasy@linutronix.de> @@ -46,11 +46,11 @@ int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode) reg &= ~DWC3_DCTL_TSTCTRL_MASK; switch (mode) { - case TEST_J: - case TEST_K: - case TEST_SE0_NAK: - case TEST_PACKET: - case TEST_FORCE_EN: + case USB_TEST_J: + case USB_TEST_K: + case USB_TEST_SE0_NAK: + case USB_TEST_PACKET: + case USB_TEST_FORCE_ENABLE: reg |= mode << 1; break; default: @@ -1403,7 +1403,7 @@ static int dwc3_gadget_start_isoc_quirk(struct dwc3_ep *dep) * Check if we can start isoc transfer on the next interval or * 4 uframes in the future with BIT[15:14] as dep->combo_num */ - test_frame_number = dep->frame_number & 0x3fff; + test_frame_number = dep->frame_number & DWC3_FRNUMBER_MASK; test_frame_number |= dep->combo_num << 14; test_frame_number += max_t(u32, 4, dep->interval); @@ -1450,7 +1450,7 @@ static int dwc3_gadget_start_isoc_quirk(struct dwc3_ep *dep) else if (test0 && test1) dep->combo_num = 0; - dep->frame_number &= 0x3fff; + dep->frame_number &= DWC3_FRNUMBER_MASK; dep->frame_number |= dep->combo_num << 14; dep->frame_number += max_t(u32, 4, dep->interval); @@ -1463,6 +1463,7 @@ static int dwc3_gadget_start_isoc_quirk(struct dwc3_ep *dep) static int __dwc3_gadget_start_isoc(struct dwc3_ep *dep) { + const struct usb_endpoint_descriptor *desc = dep->endpoint.desc; struct dwc3 *dwc = dep->dwc; int ret; int i; @@ -1480,6 +1481,27 @@ static int __dwc3_gadget_start_isoc(struct dwc3_ep *dep) return dwc3_gadget_start_isoc_quirk(dep); } + if (desc->bInterval <= 14 && + dwc->gadget.speed >= USB_SPEED_HIGH) { + u32 frame = __dwc3_gadget_get_frame(dwc); + bool rollover = frame < + (dep->frame_number & DWC3_FRNUMBER_MASK); + + /* + * frame_number is set from XferNotReady and may be already + * out of date. DSTS only provides the lower 14 bit of the + * current frame number. So add the upper two bits of + * frame_number and handle a possible rollover. + * This will provide the correct frame_number unless more than + * rollover has happened since XferNotReady. + */ + + dep->frame_number = (dep->frame_number & ~DWC3_FRNUMBER_MASK) | + frame; + if (rollover) + dep->frame_number += BIT(14); + } + for (i = 0; i < DWC3_ISOC_MAX_RETRIES; i++) { dep->frame_number = DWC3_ALIGN_FRAME(dep, i + 1); @@ -2716,7 +2738,9 @@ static bool dwc3_gadget_endpoint_trbs_complete(struct dwc3_ep *dep, if (dep->flags & DWC3_EP_END_TRANSFER_PENDING) goto out; - if (status == -EXDEV && list_empty(&dep->started_list)) + if (usb_endpoint_xfer_isoc(dep->endpoint.desc) && + list_empty(&dep->started_list) && + (list_empty(&dep->pending_list) || status == -EXDEV)) dwc3_stop_active_transfer(dep, true, true); else if (dwc3_gadget_ep_should_continue(dep)) if (__dwc3_gadget_kick_transfer(dep) == 0) |