summaryrefslogtreecommitdiff
path: root/drivers/usb/gadget/udc/fsl_qe_udc.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/gadget/udc/fsl_qe_udc.h')
-rw-r--r--drivers/usb/gadget/udc/fsl_qe_udc.h421
1 files changed, 421 insertions, 0 deletions
diff --git a/drivers/usb/gadget/udc/fsl_qe_udc.h b/drivers/usb/gadget/udc/fsl_qe_udc.h
new file mode 100644
index 000000000000..7026919fc901
--- /dev/null
+++ b/drivers/usb/gadget/udc/fsl_qe_udc.h
@@ -0,0 +1,421 @@
+/*
+ * drivers/usb/gadget/qe_udc.h
+ *
+ * Copyright (C) 2006-2008 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Xiaobo Xie <X.Xie@freescale.com>
+ * Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * Freescale USB device/endpoint management registers
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#ifndef __FSL_QE_UDC_H
+#define __FSL_QE_UDC_H
+
+/* SoC type */
+#define PORT_CPM 0
+#define PORT_QE 1
+
+#define USB_MAX_ENDPOINTS 4
+#define USB_MAX_PIPES USB_MAX_ENDPOINTS
+#define USB_EP0_MAX_SIZE 64
+#define USB_MAX_CTRL_PAYLOAD 0x4000
+#define USB_BDRING_LEN 16
+#define USB_BDRING_LEN_RX 256
+#define USB_BDRING_LEN_TX 16
+#define MIN_EMPTY_BDS 128
+#define MAX_DATA_BDS 8
+#define USB_CRC_SIZE 2
+#define USB_DIR_BOTH 0x88
+#define R_BUF_MAXSIZE 0x800
+#define USB_EP_PARA_ALIGNMENT 32
+
+/* USB Mode Register bit define */
+#define USB_MODE_EN 0x01
+#define USB_MODE_HOST 0x02
+#define USB_MODE_TEST 0x04
+#define USB_MODE_SFTE 0x08
+#define USB_MODE_RESUME 0x40
+#define USB_MODE_LSS 0x80
+
+/* USB Slave Address Register Mask */
+#define USB_SLVADDR_MASK 0x7F
+
+/* USB Endpoint register define */
+#define USB_EPNUM_MASK 0xF000
+#define USB_EPNUM_SHIFT 12
+
+#define USB_TRANS_MODE_SHIFT 8
+#define USB_TRANS_CTR 0x0000
+#define USB_TRANS_INT 0x0100
+#define USB_TRANS_BULK 0x0200
+#define USB_TRANS_ISO 0x0300
+
+#define USB_EP_MF 0x0020
+#define USB_EP_RTE 0x0010
+
+#define USB_THS_SHIFT 2
+#define USB_THS_MASK 0x000c
+#define USB_THS_NORMAL 0x0
+#define USB_THS_IGNORE_IN 0x0004
+#define USB_THS_NACK 0x0008
+#define USB_THS_STALL 0x000c
+
+#define USB_RHS_SHIFT 0
+#define USB_RHS_MASK 0x0003
+#define USB_RHS_NORMAL 0x0
+#define USB_RHS_IGNORE_OUT 0x0001
+#define USB_RHS_NACK 0x0002
+#define USB_RHS_STALL 0x0003
+
+#define USB_RTHS_MASK 0x000f
+
+/* USB Command Register define */
+#define USB_CMD_STR_FIFO 0x80
+#define USB_CMD_FLUSH_FIFO 0x40
+#define USB_CMD_ISFT 0x20
+#define USB_CMD_DSFT 0x10
+#define USB_CMD_EP_MASK 0x03
+
+/* USB Event and Mask Register define */
+#define USB_E_MSF_MASK 0x0800
+#define USB_E_SFT_MASK 0x0400
+#define USB_E_RESET_MASK 0x0200
+#define USB_E_IDLE_MASK 0x0100
+#define USB_E_TXE4_MASK 0x0080
+#define USB_E_TXE3_MASK 0x0040
+#define USB_E_TXE2_MASK 0x0020
+#define USB_E_TXE1_MASK 0x0010
+#define USB_E_SOF_MASK 0x0008
+#define USB_E_BSY_MASK 0x0004
+#define USB_E_TXB_MASK 0x0002
+#define USB_E_RXB_MASK 0x0001
+#define USBER_ALL_CLEAR 0x0fff
+
+#define USB_E_DEFAULT_DEVICE (USB_E_RESET_MASK | USB_E_TXE4_MASK | \
+ USB_E_TXE3_MASK | USB_E_TXE2_MASK | \
+ USB_E_TXE1_MASK | USB_E_BSY_MASK | \
+ USB_E_TXB_MASK | USB_E_RXB_MASK)
+
+#define USB_E_TXE_MASK (USB_E_TXE4_MASK | USB_E_TXE3_MASK|\
+ USB_E_TXE2_MASK | USB_E_TXE1_MASK)
+/* USB Status Register define */
+#define USB_IDLE_STATUS_MASK 0x01
+
+/* USB Start of Frame Timer */
+#define USB_USSFT_MASK 0x3FFF
+
+/* USB Frame Number Register */
+#define USB_USFRN_MASK 0xFFFF
+
+struct usb_device_para{
+ u16 epptr[4];
+ u32 rstate;
+ u32 rptr;
+ u16 frame_n;
+ u16 rbcnt;
+ u32 rtemp;
+ u32 rxusb_data;
+ u16 rxuptr;
+ u8 reso[2];
+ u32 softbl;
+ u8 sofucrctemp;
+};
+
+struct usb_ep_para{
+ u16 rbase;
+ u16 tbase;
+ u8 rbmr;
+ u8 tbmr;
+ u16 mrblr;
+ u16 rbptr;
+ u16 tbptr;
+ u32 tstate;
+ u32 tptr;
+ u16 tcrc;
+ u16 tbcnt;
+ u32 ttemp;
+ u16 txusbu_ptr;
+ u8 reserve[2];
+};
+
+#define USB_BUSMODE_GBL 0x20
+#define USB_BUSMODE_BO_MASK 0x18
+#define USB_BUSMODE_BO_SHIFT 0x3
+#define USB_BUSMODE_BE 0x2
+#define USB_BUSMODE_CETM 0x04
+#define USB_BUSMODE_DTB 0x02
+
+/* Endpoint basic handle */
+#define ep_index(EP) ((EP)->ep.desc->bEndpointAddress & 0xF)
+#define ep_maxpacket(EP) ((EP)->ep.maxpacket)
+#define ep_is_in(EP) ((ep_index(EP) == 0) ? (EP->udc->ep0_dir == \
+ USB_DIR_IN) : ((EP)->ep.desc->bEndpointAddress \
+ & USB_DIR_IN) == USB_DIR_IN)
+
+/* ep0 transfer state */
+#define WAIT_FOR_SETUP 0
+#define DATA_STATE_XMIT 1
+#define DATA_STATE_NEED_ZLP 2
+#define WAIT_FOR_OUT_STATUS 3
+#define DATA_STATE_RECV 4
+
+/* ep tramsfer mode */
+#define USBP_TM_CTL 0
+#define USBP_TM_ISO 1
+#define USBP_TM_BULK 2
+#define USBP_TM_INT 3
+
+/*-----------------------------------------------------------------------------
+ USB RX And TX DATA Frame
+ -----------------------------------------------------------------------------*/
+struct qe_frame{
+ u8 *data;
+ u32 len;
+ u32 status;
+ u32 info;
+
+ void *privdata;
+ struct list_head node;
+};
+
+/* Frame structure, info field. */
+#define PID_DATA0 0x80000000 /* Data toggle zero */
+#define PID_DATA1 0x40000000 /* Data toggle one */
+#define PID_SETUP 0x20000000 /* setup bit */
+#define SETUP_STATUS 0x10000000 /* setup status bit */
+#define SETADDR_STATUS 0x08000000 /* setupup address status bit */
+#define NO_REQ 0x04000000 /* Frame without request */
+#define HOST_DATA 0x02000000 /* Host data frame */
+#define FIRST_PACKET_IN_FRAME 0x01000000 /* first packet in the frame */
+#define TOKEN_FRAME 0x00800000 /* Host token frame */
+#define ZLP 0x00400000 /* Zero length packet */
+#define IN_TOKEN_FRAME 0x00200000 /* In token package */
+#define OUT_TOKEN_FRAME 0x00100000 /* Out token package */
+#define SETUP_TOKEN_FRAME 0x00080000 /* Setup token package */
+#define STALL_FRAME 0x00040000 /* Stall handshake */
+#define NACK_FRAME 0x00020000 /* Nack handshake */
+#define NO_PID 0x00010000 /* No send PID */
+#define NO_CRC 0x00008000 /* No send CRC */
+#define HOST_COMMAND 0x00004000 /* Host command frame */
+
+/* Frame status field */
+/* Receive side */
+#define FRAME_OK 0x00000000 /* Frame transmitted or received OK */
+#define FRAME_ERROR 0x80000000 /* Error occurred on frame */
+#define START_FRAME_LOST 0x40000000 /* START_FRAME_LOST */
+#define END_FRAME_LOST 0x20000000 /* END_FRAME_LOST */
+#define RX_ER_NONOCT 0x10000000 /* Rx Non Octet Aligned Packet */
+#define RX_ER_BITSTUFF 0x08000000 /* Frame Aborted --Received packet
+ with bit stuff error */
+#define RX_ER_CRC 0x04000000 /* Received packet with CRC error */
+#define RX_ER_OVERUN 0x02000000 /* Over-run occurred on reception */
+#define RX_ER_PID 0x01000000 /* Wrong PID received */
+/* Tranmit side */
+#define TX_ER_NAK 0x00800000 /* Received NAK handshake */
+#define TX_ER_STALL 0x00400000 /* Received STALL handshake */
+#define TX_ER_TIMEOUT 0x00200000 /* Transmit time out */
+#define TX_ER_UNDERUN 0x00100000 /* Transmit underrun */
+#define FRAME_INPROGRESS 0x00080000 /* Frame is being transmitted */
+#define ER_DATA_UNDERUN 0x00040000 /* Frame is shorter then expected */
+#define ER_DATA_OVERUN 0x00020000 /* Frame is longer then expected */
+
+/* QE USB frame operation functions */
+#define frame_get_length(frm) (frm->len)
+#define frame_set_length(frm, leng) (frm->len = leng)
+#define frame_get_data(frm) (frm->data)
+#define frame_set_data(frm, dat) (frm->data = dat)
+#define frame_get_info(frm) (frm->info)
+#define frame_set_info(frm, inf) (frm->info = inf)
+#define frame_get_status(frm) (frm->status)
+#define frame_set_status(frm, stat) (frm->status = stat)
+#define frame_get_privdata(frm) (frm->privdata)
+#define frame_set_privdata(frm, dat) (frm->privdata = dat)
+
+static inline void qe_frame_clean(struct qe_frame *frm)
+{
+ frame_set_data(frm, NULL);
+ frame_set_length(frm, 0);
+ frame_set_status(frm, FRAME_OK);
+ frame_set_info(frm, 0);
+ frame_set_privdata(frm, NULL);
+}
+
+static inline void qe_frame_init(struct qe_frame *frm)
+{
+ qe_frame_clean(frm);
+ INIT_LIST_HEAD(&(frm->node));
+}
+
+struct qe_req {
+ struct usb_request req;
+ struct list_head queue;
+ /* ep_queue() func will add
+ a request->queue into a udc_ep->queue 'd tail */
+ struct qe_ep *ep;
+ unsigned mapped:1;
+};
+
+struct qe_ep {
+ struct usb_ep ep;
+ struct list_head queue;
+ struct qe_udc *udc;
+ struct usb_gadget *gadget;
+
+ u8 state;
+
+ struct qe_bd __iomem *rxbase;
+ struct qe_bd __iomem *n_rxbd;
+ struct qe_bd __iomem *e_rxbd;
+
+ struct qe_bd __iomem *txbase;
+ struct qe_bd __iomem *n_txbd;
+ struct qe_bd __iomem *c_txbd;
+
+ struct qe_frame *rxframe;
+ u8 *rxbuffer;
+ dma_addr_t rxbuf_d;
+ u8 rxbufmap;
+ unsigned char localnack;
+ int has_data;
+
+ struct qe_frame *txframe;
+ struct qe_req *tx_req;
+ int sent; /*data already sent */
+ int last; /*data sent in the last time*/
+
+ u8 dir;
+ u8 epnum;
+ u8 tm; /* transfer mode */
+ u8 data01;
+ u8 init;
+
+ u8 already_seen;
+ u8 enable_tasklet;
+ u8 setup_stage;
+ u32 last_io; /* timestamp */
+
+ char name[14];
+
+ unsigned double_buf:1;
+ unsigned stopped:1;
+ unsigned fnf:1;
+ unsigned has_dma:1;
+
+ u8 ackwait;
+ u8 dma_channel;
+ u16 dma_counter;
+ int lch;
+
+ struct timer_list timer;
+};
+
+struct qe_udc {
+ struct usb_gadget gadget;
+ struct usb_gadget_driver *driver;
+ struct device *dev;
+ struct qe_ep eps[USB_MAX_ENDPOINTS];
+ struct usb_ctrlrequest local_setup_buff;
+ spinlock_t lock; /* lock for set/config qe_udc */
+ unsigned long soc_type; /* QE or CPM soc */
+
+ struct qe_req *status_req; /* ep0 status request */
+
+ /* USB and EP Parameter Block pointer */
+ struct usb_device_para __iomem *usb_param;
+ struct usb_ep_para __iomem *ep_param[4];
+
+ u32 max_pipes; /* Device max pipes */
+ u32 max_use_endpts; /* Max endpointes to be used */
+ u32 bus_reset; /* Device is bus reseting */
+ u32 resume_state; /* USB state to resume*/
+ u32 usb_state; /* USB current state */
+ u32 usb_next_state; /* USB next state */
+ u32 ep0_state; /* Enpoint zero state */
+ u32 ep0_dir; /* Enpoint zero direction: can be
+ USB_DIR_IN or USB_DIR_OUT*/
+ u32 usb_sof_count; /* SOF count */
+ u32 errors; /* USB ERRORs count */
+
+ u8 *tmpbuf;
+ u32 c_start;
+ u32 c_end;
+
+ u8 *nullbuf;
+ u8 *statusbuf;
+ dma_addr_t nullp;
+ u8 nullmap;
+ u8 device_address; /* Device USB address */
+
+ unsigned int usb_clock;
+ unsigned int usb_irq;
+ struct usb_ctlr __iomem *usb_regs;
+
+ struct tasklet_struct rx_tasklet;
+
+ struct completion *done; /* to make sure release() is done */
+};
+
+#define EP_STATE_IDLE 0
+#define EP_STATE_NACK 1
+#define EP_STATE_STALL 2
+
+/*
+ * transmit BD's status
+ */
+#define T_R 0x80000000 /* ready bit */
+#define T_W 0x20000000 /* wrap bit */
+#define T_I 0x10000000 /* interrupt on completion */
+#define T_L 0x08000000 /* last */
+#define T_TC 0x04000000 /* transmit CRC */
+#define T_CNF 0x02000000 /* wait for transmit confirm */
+#define T_LSP 0x01000000 /* Low-speed transaction */
+#define T_PID 0x00c00000 /* packet id */
+#define T_NAK 0x00100000 /* No ack. */
+#define T_STAL 0x00080000 /* Stall received */
+#define T_TO 0x00040000 /* time out */
+#define T_UN 0x00020000 /* underrun */
+
+#define DEVICE_T_ERROR (T_UN | T_TO)
+#define HOST_T_ERROR (T_UN | T_TO | T_NAK | T_STAL)
+#define DEVICE_T_BD_MASK DEVICE_T_ERROR
+#define HOST_T_BD_MASK HOST_T_ERROR
+
+#define T_PID_SHIFT 6
+#define T_PID_DATA0 0x00800000 /* Data 0 toggle */
+#define T_PID_DATA1 0x00c00000 /* Data 1 toggle */
+
+/*
+ * receive BD's status
+ */
+#define R_E 0x80000000 /* buffer empty */
+#define R_W 0x20000000 /* wrap bit */
+#define R_I 0x10000000 /* interrupt on reception */
+#define R_L 0x08000000 /* last */
+#define R_F 0x04000000 /* first */
+#define R_PID 0x00c00000 /* packet id */
+#define R_NO 0x00100000 /* Rx Non Octet Aligned Packet */
+#define R_AB 0x00080000 /* Frame Aborted */
+#define R_CR 0x00040000 /* CRC Error */
+#define R_OV 0x00020000 /* Overrun */
+
+#define R_ERROR (R_NO | R_AB | R_CR | R_OV)
+#define R_BD_MASK R_ERROR
+
+#define R_PID_DATA0 0x00000000
+#define R_PID_DATA1 0x00400000
+#define R_PID_SETUP 0x00800000
+
+#define CPM_USB_STOP_TX 0x2e600000
+#define CPM_USB_RESTART_TX 0x2e600000
+#define CPM_USB_STOP_TX_OPCODE 0x0a
+#define CPM_USB_RESTART_TX_OPCODE 0x0b
+#define CPM_USB_EP_SHIFT 5
+
+#endif /* __FSL_QE_UDC_H */