diff options
Diffstat (limited to 'drivers/usb/gadget/udc/s3c-hsudc.c')
| -rw-r--r-- | drivers/usb/gadget/udc/s3c-hsudc.c | 1319 |
1 files changed, 0 insertions, 1319 deletions
diff --git a/drivers/usb/gadget/udc/s3c-hsudc.c b/drivers/usb/gadget/udc/s3c-hsudc.c deleted file mode 100644 index 4b7eb7701470..000000000000 --- a/drivers/usb/gadget/udc/s3c-hsudc.c +++ /dev/null @@ -1,1319 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* linux/drivers/usb/gadget/s3c-hsudc.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S3C24XX USB 2.0 High-speed USB controller gadget driver - * - * The S3C24XX USB 2.0 high-speed USB controller supports upto 9 endpoints. - * Each endpoint can be configured as either in or out endpoint. Endpoints - * can be configured for Bulk or Interrupt transfer mode. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/spinlock.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/dma-mapping.h> -#include <linux/delay.h> -#include <linux/io.h> -#include <linux/slab.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/usb/ch9.h> -#include <linux/usb/gadget.h> -#include <linux/usb/otg.h> -#include <linux/prefetch.h> -#include <linux/platform_data/s3c-hsudc.h> -#include <linux/regulator/consumer.h> -#include <linux/pm_runtime.h> - -#define S3C_HSUDC_REG(x) (x) - -/* Non-Indexed Registers */ -#define S3C_IR S3C_HSUDC_REG(0x00) /* Index Register */ -#define S3C_EIR S3C_HSUDC_REG(0x04) /* EP Intr Status */ -#define S3C_EIR_EP0 (1<<0) -#define S3C_EIER S3C_HSUDC_REG(0x08) /* EP Intr Enable */ -#define S3C_FAR S3C_HSUDC_REG(0x0c) /* Gadget Address */ -#define S3C_FNR S3C_HSUDC_REG(0x10) /* Frame Number */ -#define S3C_EDR S3C_HSUDC_REG(0x14) /* EP Direction */ -#define S3C_TR S3C_HSUDC_REG(0x18) /* Test Register */ -#define S3C_SSR S3C_HSUDC_REG(0x1c) /* System Status */ -#define S3C_SSR_DTZIEN_EN (0xff8f) -#define S3C_SSR_ERR (0xff80) -#define S3C_SSR_VBUSON (1 << 8) -#define S3C_SSR_HSP (1 << 4) -#define S3C_SSR_SDE (1 << 3) -#define S3C_SSR_RESUME (1 << 2) -#define S3C_SSR_SUSPEND (1 << 1) -#define S3C_SSR_RESET (1 << 0) -#define S3C_SCR S3C_HSUDC_REG(0x20) /* System Control */ -#define S3C_SCR_DTZIEN_EN (1 << 14) -#define S3C_SCR_RRD_EN (1 << 5) -#define S3C_SCR_SUS_EN (1 << 1) -#define S3C_SCR_RST_EN (1 << 0) -#define S3C_EP0SR S3C_HSUDC_REG(0x24) /* EP0 Status */ -#define S3C_EP0SR_EP0_LWO (1 << 6) -#define S3C_EP0SR_STALL (1 << 4) -#define S3C_EP0SR_TX_SUCCESS (1 << 1) -#define S3C_EP0SR_RX_SUCCESS (1 << 0) -#define S3C_EP0CR S3C_HSUDC_REG(0x28) /* EP0 Control */ -#define S3C_BR(_x) S3C_HSUDC_REG(0x60 + (_x * 4)) - -/* Indexed Registers */ -#define S3C_ESR S3C_HSUDC_REG(0x2c) /* EPn Status */ -#define S3C_ESR_FLUSH (1 << 6) -#define S3C_ESR_STALL (1 << 5) -#define S3C_ESR_LWO (1 << 4) -#define S3C_ESR_PSIF_ONE (1 << 2) -#define S3C_ESR_PSIF_TWO (2 << 2) -#define S3C_ESR_TX_SUCCESS (1 << 1) -#define S3C_ESR_RX_SUCCESS (1 << 0) -#define S3C_ECR S3C_HSUDC_REG(0x30) /* EPn Control */ -#define S3C_ECR_DUEN (1 << 7) -#define S3C_ECR_FLUSH (1 << 6) -#define S3C_ECR_STALL (1 << 1) -#define S3C_ECR_IEMS (1 << 0) -#define S3C_BRCR S3C_HSUDC_REG(0x34) /* Read Count */ -#define S3C_BWCR S3C_HSUDC_REG(0x38) /* Write Count */ -#define S3C_MPR S3C_HSUDC_REG(0x3c) /* Max Pkt Size */ - -#define WAIT_FOR_SETUP (0) -#define DATA_STATE_XMIT (1) -#define DATA_STATE_RECV (2) - -static const char * const s3c_hsudc_supply_names[] = { - "vdda", /* analog phy supply, 3.3V */ - "vddi", /* digital phy supply, 1.2V */ - "vddosc", /* oscillator supply, 1.8V - 3.3V */ -}; - -/** - * struct s3c_hsudc_ep - Endpoint representation used by driver. - * @ep: USB gadget layer representation of device endpoint. - * @name: Endpoint name (as required by ep autoconfiguration). - * @dev: Reference to the device controller to which this EP belongs. - * @desc: Endpoint descriptor obtained from the gadget driver. - * @queue: Transfer request queue for the endpoint. - * @stopped: Maintains state of endpoint, set if EP is halted. - * @bEndpointAddress: EP address (including direction bit). - * @fifo: Base address of EP FIFO. - */ -struct s3c_hsudc_ep { - struct usb_ep ep; - char name[20]; - struct s3c_hsudc *dev; - struct list_head queue; - u8 stopped; - u8 wedge; - u8 bEndpointAddress; - void __iomem *fifo; -}; - -/** - * struct s3c_hsudc_req - Driver encapsulation of USB gadget transfer request. - * @req: Reference to USB gadget transfer request. - * @queue: Used for inserting this request to the endpoint request queue. - */ -struct s3c_hsudc_req { - struct usb_request req; - struct list_head queue; -}; - -/** - * struct s3c_hsudc - Driver's abstraction of the device controller. - * @gadget: Instance of usb_gadget which is referenced by gadget driver. - * @driver: Reference to currently active gadget driver. - * @dev: The device reference used by probe function. - * @lock: Lock to synchronize the usage of Endpoints (EP's are indexed). - * @regs: Remapped base address of controller's register space. - * irq: IRQ number used by the controller. - * uclk: Reference to the controller clock. - * ep0state: Current state of EP0. - * ep: List of endpoints supported by the controller. - */ -struct s3c_hsudc { - struct usb_gadget gadget; - struct usb_gadget_driver *driver; - struct device *dev; - struct s3c24xx_hsudc_platdata *pd; - struct usb_phy *transceiver; - struct regulator_bulk_data supplies[ARRAY_SIZE(s3c_hsudc_supply_names)]; - spinlock_t lock; - void __iomem *regs; - int irq; - struct clk *uclk; - int ep0state; - struct s3c_hsudc_ep ep[]; -}; - -#define ep_maxpacket(_ep) ((_ep)->ep.maxpacket) -#define ep_is_in(_ep) ((_ep)->bEndpointAddress & USB_DIR_IN) -#define ep_index(_ep) ((_ep)->bEndpointAddress & \ - USB_ENDPOINT_NUMBER_MASK) - -static const char driver_name[] = "s3c-udc"; -static const char ep0name[] = "ep0-control"; - -static inline struct s3c_hsudc_req *our_req(struct usb_request *req) -{ - return container_of(req, struct s3c_hsudc_req, req); -} - -static inline struct s3c_hsudc_ep *our_ep(struct usb_ep *ep) -{ - return container_of(ep, struct s3c_hsudc_ep, ep); -} - -static inline struct s3c_hsudc *to_hsudc(struct usb_gadget *gadget) -{ - return container_of(gadget, struct s3c_hsudc, gadget); -} - -static inline void set_index(struct s3c_hsudc *hsudc, int ep_addr) -{ - ep_addr &= USB_ENDPOINT_NUMBER_MASK; - writel(ep_addr, hsudc->regs + S3C_IR); -} - -static inline void __orr32(void __iomem *ptr, u32 val) -{ - writel(readl(ptr) | val, ptr); -} - -/** - * s3c_hsudc_complete_request - Complete a transfer request. - * @hsep: Endpoint to which the request belongs. - * @hsreq: Transfer request to be completed. - * @status: Transfer completion status for the transfer request. - */ -static void s3c_hsudc_complete_request(struct s3c_hsudc_ep *hsep, - struct s3c_hsudc_req *hsreq, int status) -{ - unsigned int stopped = hsep->stopped; - struct s3c_hsudc *hsudc = hsep->dev; - - list_del_init(&hsreq->queue); - hsreq->req.status = status; - - if (!ep_index(hsep)) { - hsudc->ep0state = WAIT_FOR_SETUP; - hsep->bEndpointAddress &= ~USB_DIR_IN; - } - - hsep->stopped = 1; - spin_unlock(&hsudc->lock); - usb_gadget_giveback_request(&hsep->ep, &hsreq->req); - spin_lock(&hsudc->lock); - hsep->stopped = stopped; -} - -/** - * s3c_hsudc_nuke_ep - Terminate all requests queued for a endpoint. - * @hsep: Endpoint for which queued requests have to be terminated. - * @status: Transfer completion status for the transfer request. - */ -static void s3c_hsudc_nuke_ep(struct s3c_hsudc_ep *hsep, int status) -{ - struct s3c_hsudc_req *hsreq; - - while (!list_empty(&hsep->queue)) { - hsreq = list_entry(hsep->queue.next, - struct s3c_hsudc_req, queue); - s3c_hsudc_complete_request(hsep, hsreq, status); - } -} - -/** - * s3c_hsudc_stop_activity - Stop activity on all endpoints. - * @hsudc: Device controller for which EP activity is to be stopped. - * - * All the endpoints are stopped and any pending transfer requests if any on - * the endpoint are terminated. - */ -static void s3c_hsudc_stop_activity(struct s3c_hsudc *hsudc) -{ - struct s3c_hsudc_ep *hsep; - int epnum; - - hsudc->gadget.speed = USB_SPEED_UNKNOWN; - - for (epnum = 0; epnum < hsudc->pd->epnum; epnum++) { - hsep = &hsudc->ep[epnum]; - hsep->stopped = 1; - s3c_hsudc_nuke_ep(hsep, -ESHUTDOWN); - } -} - -/** - * s3c_hsudc_read_setup_pkt - Read the received setup packet from EP0 fifo. - * @hsudc: Device controller from which setup packet is to be read. - * @buf: The buffer into which the setup packet is read. - * - * The setup packet received in the EP0 fifo is read and stored into a - * given buffer address. - */ - -static void s3c_hsudc_read_setup_pkt(struct s3c_hsudc *hsudc, u16 *buf) -{ - int count; - - count = readl(hsudc->regs + S3C_BRCR); - while (count--) - *buf++ = (u16)readl(hsudc->regs + S3C_BR(0)); - - writel(S3C_EP0SR_RX_SUCCESS, hsudc->regs + S3C_EP0SR); -} - -/** - * s3c_hsudc_write_fifo - Write next chunk of transfer data to EP fifo. - * @hsep: Endpoint to which the data is to be written. - * @hsreq: Transfer request from which the next chunk of data is written. - * - * Write the next chunk of data from a transfer request to the endpoint FIFO. - * If the transfer request completes, 1 is returned, otherwise 0 is returned. - */ -static int s3c_hsudc_write_fifo(struct s3c_hsudc_ep *hsep, - struct s3c_hsudc_req *hsreq) -{ - u16 *buf; - u32 max = ep_maxpacket(hsep); - u32 count, length; - bool is_last; - void __iomem *fifo = hsep->fifo; - - buf = hsreq->req.buf + hsreq->req.actual; - prefetch(buf); - - length = hsreq->req.length - hsreq->req.actual; - length = min(length, max); - hsreq->req.actual += length; - - writel(length, hsep->dev->regs + S3C_BWCR); - for (count = 0; count < length; count += 2) - writel(*buf++, fifo); - - if (count != max) { - is_last = true; - } else { - if (hsreq->req.length != hsreq->req.actual || hsreq->req.zero) - is_last = false; - else - is_last = true; - } - - if (is_last) { - s3c_hsudc_complete_request(hsep, hsreq, 0); - return 1; - } - - return 0; -} - -/** - * s3c_hsudc_read_fifo - Read the next chunk of data from EP fifo. - * @hsep: Endpoint from which the data is to be read. - * @hsreq: Transfer request to which the next chunk of data read is written. - * - * Read the next chunk of data from the endpoint FIFO and a write it to the - * transfer request buffer. If the transfer request completes, 1 is returned, - * otherwise 0 is returned. - */ -static int s3c_hsudc_read_fifo(struct s3c_hsudc_ep *hsep, - struct s3c_hsudc_req *hsreq) -{ - struct s3c_hsudc *hsudc = hsep->dev; - u32 csr, offset; - u16 *buf, word; - u32 buflen, rcnt, rlen; - void __iomem *fifo = hsep->fifo; - u32 is_short = 0; - - offset = (ep_index(hsep)) ? S3C_ESR : S3C_EP0SR; - csr = readl(hsudc->regs + offset); - if (!(csr & S3C_ESR_RX_SUCCESS)) - return -EINVAL; - - buf = hsreq->req.buf + hsreq->req.actual; - prefetchw(buf); - buflen = hsreq->req.length - hsreq->req.actual; - - rcnt = readl(hsudc->regs + S3C_BRCR); - rlen = (csr & S3C_ESR_LWO) ? (rcnt * 2 - 1) : (rcnt * 2); - - hsreq->req.actual += min(rlen, buflen); - is_short = (rlen < hsep->ep.maxpacket); - - while (rcnt-- != 0) { - word = (u16)readl(fifo); - if (buflen) { - *buf++ = word; - buflen--; - } else { - hsreq->req.status = -EOVERFLOW; - } - } - - writel(S3C_ESR_RX_SUCCESS, hsudc->regs + offset); - - if (is_short || hsreq->req.actual == hsreq->req.length) { - s3c_hsudc_complete_request(hsep, hsreq, 0); - return 1; - } - - return 0; -} - -/** - * s3c_hsudc_epin_intr - Handle in-endpoint interrupt. - * @hsudc - Device controller for which the interrupt is to be handled. - * @ep_idx - Endpoint number on which an interrupt is pending. - * - * Handles interrupt for a in-endpoint. The interrupts that are handled are - * stall and data transmit complete interrupt. - */ -static void s3c_hsudc_epin_intr(struct s3c_hsudc *hsudc, u32 ep_idx) -{ - struct s3c_hsudc_ep *hsep = &hsudc->ep[ep_idx]; - struct s3c_hsudc_req *hsreq; - u32 csr; - - csr = readl(hsudc->regs + S3C_ESR); - if (csr & S3C_ESR_STALL) { - writel(S3C_ESR_STALL, hsudc->regs + S3C_ESR); - return; - } - - if (csr & S3C_ESR_TX_SUCCESS) { - writel(S3C_ESR_TX_SUCCESS, hsudc->regs + S3C_ESR); - if (list_empty(&hsep->queue)) - return; - - hsreq = list_entry(hsep->queue.next, - struct s3c_hsudc_req, queue); - if ((s3c_hsudc_write_fifo(hsep, hsreq) == 0) && - (csr & S3C_ESR_PSIF_TWO)) - s3c_hsudc_write_fifo(hsep, hsreq); - } -} - -/** - * s3c_hsudc_epout_intr - Handle out-endpoint interrupt. - * @hsudc - Device controller for which the interrupt is to be handled. - * @ep_idx - Endpoint number on which an interrupt is pending. - * - * Handles interrupt for a out-endpoint. The interrupts that are handled are - * stall, flush and data ready interrupt. - */ -static void s3c_hsudc_epout_intr(struct s3c_hsudc *hsudc, u32 ep_idx) -{ - struct s3c_hsudc_ep *hsep = &hsudc->ep[ep_idx]; - struct s3c_hsudc_req *hsreq; - u32 csr; - - csr = readl(hsudc->regs + S3C_ESR); - if (csr & S3C_ESR_STALL) { - writel(S3C_ESR_STALL, hsudc->regs + S3C_ESR); - return; - } - - if (csr & S3C_ESR_FLUSH) { - __orr32(hsudc->regs + S3C_ECR, S3C_ECR_FLUSH); - return; - } - - if (csr & S3C_ESR_RX_SUCCESS) { - if (list_empty(&hsep->queue)) - return; - - hsreq = list_entry(hsep->queue.next, - struct s3c_hsudc_req, queue); - if (((s3c_hsudc_read_fifo(hsep, hsreq)) == 0) && - (csr & S3C_ESR_PSIF_TWO)) - s3c_hsudc_read_fifo(hsep, hsreq); - } -} - -/** s3c_hsudc_set_halt - Set or clear a endpoint halt. - * @_ep: Endpoint on which halt has to be set or cleared. - * @value: 1 for setting halt on endpoint, 0 to clear halt. - * - * Set or clear endpoint halt. If halt is set, the endpoint is stopped. - * If halt is cleared, for in-endpoints, if there are any pending - * transfer requests, transfers are started. - */ -static int s3c_hsudc_set_halt(struct usb_ep *_ep, int value) -{ - struct s3c_hsudc_ep *hsep = our_ep(_ep); - struct s3c_hsudc *hsudc = hsep->dev; - struct s3c_hsudc_req *hsreq; - unsigned long irqflags; - u32 ecr; - u32 offset; - - if (value && ep_is_in(hsep) && !list_empty(&hsep->queue)) - return -EAGAIN; - - spin_lock_irqsave(&hsudc->lock, irqflags); - set_index(hsudc, ep_index(hsep)); - offset = (ep_index(hsep)) ? S3C_ECR : S3C_EP0CR; - ecr = readl(hsudc->regs + offset); - - if (value) { - ecr |= S3C_ECR_STALL; - if (ep_index(hsep)) - ecr |= S3C_ECR_FLUSH; - hsep->stopped = 1; - } else { - ecr &= ~S3C_ECR_STALL; - hsep->stopped = hsep->wedge = 0; - } - writel(ecr, hsudc->regs + offset); - - if (ep_is_in(hsep) && !list_empty(&hsep->queue) && !value) { - hsreq = list_entry(hsep->queue.next, - struct s3c_hsudc_req, queue); - if (hsreq) - s3c_hsudc_write_fifo(hsep, hsreq); - } - - spin_unlock_irqrestore(&hsudc->lock, irqflags); - return 0; -} - -/** s3c_hsudc_set_wedge - Sets the halt feature with the clear requests ignored - * @_ep: Endpoint on which wedge has to be set. - * - * Sets the halt feature with the clear requests ignored. - */ -static int s3c_hsudc_set_wedge(struct usb_ep *_ep) -{ - struct s3c_hsudc_ep *hsep = our_ep(_ep); - - if (!hsep) - return -EINVAL; - - hsep->wedge = 1; - return usb_ep_set_halt(_ep); -} - -/** s3c_hsudc_handle_reqfeat - Handle set feature or clear feature requests. - * @_ep: Device controller on which the set/clear feature needs to be handled. - * @ctrl: Control request as received on the endpoint 0. - * - * Handle set feature or clear feature control requests on the control endpoint. - */ -static int s3c_hsudc_handle_reqfeat(struct s3c_hsudc *hsudc, - struct usb_ctrlrequest *ctrl) -{ - struct s3c_hsudc_ep *hsep; - bool set = (ctrl->bRequest == USB_REQ_SET_FEATURE); - u8 ep_num = ctrl->wIndex & USB_ENDPOINT_NUMBER_MASK; - - if (ctrl->bRequestType == USB_RECIP_ENDPOINT) { - hsep = &hsudc->ep[ep_num]; - switch (le16_to_cpu(ctrl->wValue)) { - case USB_ENDPOINT_HALT: - if (set || !hsep->wedge) - s3c_hsudc_set_halt(&hsep->ep, set); - return 0; - } - } - - return -ENOENT; -} - -/** - * s3c_hsudc_process_req_status - Handle get status control request. - * @hsudc: Device controller on which get status request has be handled. - * @ctrl: Control request as received on the endpoint 0. - * - * Handle get status control request received on control endpoint. - */ -static void s3c_hsudc_process_req_status(struct s3c_hsudc *hsudc, - struct usb_ctrlrequest *ctrl) -{ - struct s3c_hsudc_ep *hsep0 = &hsudc->ep[0]; - struct s3c_hsudc_req hsreq; - struct s3c_hsudc_ep *hsep; - __le16 reply; - u8 epnum; - - switch (ctrl->bRequestType & USB_RECIP_MASK) { - case USB_RECIP_DEVICE: - reply = cpu_to_le16(0); - break; - - case USB_RECIP_INTERFACE: - reply = cpu_to_le16(0); - break; - - case USB_RECIP_ENDPOINT: - epnum = le16_to_cpu(ctrl->wIndex) & USB_ENDPOINT_NUMBER_MASK; - hsep = &hsudc->ep[epnum]; - reply = cpu_to_le16(hsep->stopped ? 1 : 0); - break; - } - - INIT_LIST_HEAD(&hsreq.queue); - hsreq.req.length = 2; - hsreq.req.buf = &reply; - hsreq.req.actual = 0; - hsreq.req.complete = NULL; - s3c_hsudc_write_fifo(hsep0, &hsreq); -} - -/** - * s3c_hsudc_process_setup - Process control request received on endpoint 0. - * @hsudc: Device controller on which control request has been received. - * - * Read the control request received on endpoint 0, decode it and handle - * the request. - */ -static void s3c_hsudc_process_setup(struct s3c_hsudc *hsudc) -{ - struct s3c_hsudc_ep *hsep = &hsudc->ep[0]; - struct usb_ctrlrequest ctrl = {0}; - int ret; - - s3c_hsudc_nuke_ep(hsep, -EPROTO); - s3c_hsudc_read_setup_pkt(hsudc, (u16 *)&ctrl); - - if (ctrl.bRequestType & USB_DIR_IN) { - hsep->bEndpointAddress |= USB_DIR_IN; - hsudc->ep0state = DATA_STATE_XMIT; - } else { - hsep->bEndpointAddress &= ~USB_DIR_IN; - hsudc->ep0state = DATA_STATE_RECV; - } - - switch (ctrl.bRequest) { - case USB_REQ_SET_ADDRESS: - if (ctrl.bRequestType != (USB_TYPE_STANDARD | USB_RECIP_DEVICE)) - break; - hsudc->ep0state = WAIT_FOR_SETUP; - return; - - case USB_REQ_GET_STATUS: - if ((ctrl.bRequestType & USB_TYPE_MASK) != USB_TYPE_STANDARD) - break; - s3c_hsudc_process_req_status(hsudc, &ctrl); - return; - - case USB_REQ_SET_FEATURE: - case USB_REQ_CLEAR_FEATURE: - if ((ctrl.bRequestType & USB_TYPE_MASK) != USB_TYPE_STANDARD) - break; - s3c_hsudc_handle_reqfeat(hsudc, &ctrl); - hsudc->ep0state = WAIT_FOR_SETUP; - return; - } - - if (hsudc->driver) { - spin_unlock(&hsudc->lock); - ret = hsudc->driver->setup(&hsudc->gadget, &ctrl); - spin_lock(&hsudc->lock); - - if (ctrl.bRequest == USB_REQ_SET_CONFIGURATION) { - hsep->bEndpointAddress &= ~USB_DIR_IN; - hsudc->ep0state = WAIT_FOR_SETUP; - } - - if (ret < 0) { - dev_err(hsudc->dev, "setup failed, returned %d\n", - ret); - s3c_hsudc_set_halt(&hsep->ep, 1); - hsudc->ep0state = WAIT_FOR_SETUP; - hsep->bEndpointAddress &= ~USB_DIR_IN; - } - } -} - -/** s3c_hsudc_handle_ep0_intr - Handle endpoint 0 interrupt. - * @hsudc: Device controller on which endpoint 0 interrupt has occurred. - * - * Handle endpoint 0 interrupt when it occurs. EP0 interrupt could occur - * when a stall handshake is sent to host or data is sent/received on - * endpoint 0. - */ -static void s3c_hsudc_handle_ep0_intr(struct s3c_hsudc *hsudc) -{ - struct s3c_hsudc_ep *hsep = &hsudc->ep[0]; - struct s3c_hsudc_req *hsreq; - u32 csr = readl(hsudc->regs + S3C_EP0SR); - u32 ecr; - - if (csr & S3C_EP0SR_STALL) { - ecr = readl(hsudc->regs + S3C_EP0CR); - ecr &= ~(S3C_ECR_STALL | S3C_ECR_FLUSH); - writel(ecr, hsudc->regs + S3C_EP0CR); - - writel(S3C_EP0SR_STALL, hsudc->regs + S3C_EP0SR); - hsep->stopped = 0; - - s3c_hsudc_nuke_ep(hsep, -ECONNABORTED); - hsudc->ep0state = WAIT_FOR_SETUP; - hsep->bEndpointAddress &= ~USB_DIR_IN; - return; - } - - if (csr & S3C_EP0SR_TX_SUCCESS) { - writel(S3C_EP0SR_TX_SUCCESS, hsudc->regs + S3C_EP0SR); - if (ep_is_in(hsep)) { - if (list_empty(&hsep->queue)) - return; - - hsreq = list_entry(hsep->queue.next, - struct s3c_hsudc_req, queue); - s3c_hsudc_write_fifo(hsep, hsreq); - } - } - - if (csr & S3C_EP0SR_RX_SUCCESS) { - if (hsudc->ep0state == WAIT_FOR_SETUP) - s3c_hsudc_process_setup(hsudc); - else { - if (!ep_is_in(hsep)) { - if (list_empty(&hsep->queue)) - return; - hsreq = list_entry(hsep->queue.next, - struct s3c_hsudc_req, queue); - s3c_hsudc_read_fifo(hsep, hsreq); - } - } - } -} - -/** - * s3c_hsudc_ep_enable - Enable a endpoint. - * @_ep: The endpoint to be enabled. - * @desc: Endpoint descriptor. - * - * Enables a endpoint when called from the gadget driver. Endpoint stall if - * any is cleared, transfer type is configured and endpoint interrupt is - * enabled. - */ -static int s3c_hsudc_ep_enable(struct usb_ep *_ep, - const struct usb_endpoint_descriptor *desc) -{ - struct s3c_hsudc_ep *hsep; - struct s3c_hsudc *hsudc; - unsigned long flags; - u32 ecr = 0; - - hsep = our_ep(_ep); - if (!_ep || !desc || _ep->name == ep0name - || desc->bDescriptorType != USB_DT_ENDPOINT - || hsep->bEndpointAddress != desc->bEndpointAddress - || ep_maxpacket(hsep) < usb_endpoint_maxp(desc)) - return -EINVAL; - - if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK - && usb_endpoint_maxp(desc) != ep_maxpacket(hsep)) - || !desc->wMaxPacketSize) - return -ERANGE; - - hsudc = hsep->dev; - if (!hsudc->driver || hsudc->gadget.speed == USB_SPEED_UNKNOWN) - return -ESHUTDOWN; - - spin_lock_irqsave(&hsudc->lock, flags); - - set_index(hsudc, hsep->bEndpointAddress); - ecr |= ((usb_endpoint_xfer_int(desc)) ? S3C_ECR_IEMS : S3C_ECR_DUEN); - writel(ecr, hsudc->regs + S3C_ECR); - - hsep->stopped = hsep->wedge = 0; - hsep->ep.desc = desc; - hsep->ep.maxpacket = usb_endpoint_maxp(desc); - - s3c_hsudc_set_halt(_ep, 0); - __set_bit(ep_index(hsep), hsudc->regs + S3C_EIER); - - spin_unlock_irqrestore(&hsudc->lock, flags); - return 0; -} - -/** - * s3c_hsudc_ep_disable - Disable a endpoint. - * @_ep: The endpoint to be disabled. - * @desc: Endpoint descriptor. - * - * Disables a endpoint when called from the gadget driver. - */ -static int s3c_hsudc_ep_disable(struct usb_ep *_ep) -{ - struct s3c_hsudc_ep *hsep = our_ep(_ep); - struct s3c_hsudc *hsudc = hsep->dev; - unsigned long flags; - - if (!_ep || !hsep->ep.desc) - return -EINVAL; - - spin_lock_irqsave(&hsudc->lock, flags); - - set_index(hsudc, hsep->bEndpointAddress); - __clear_bit(ep_index(hsep), hsudc->regs + S3C_EIER); - - s3c_hsudc_nuke_ep(hsep, -ESHUTDOWN); - - hsep->ep.desc = NULL; - hsep->stopped = 1; - - spin_unlock_irqrestore(&hsudc->lock, flags); - return 0; -} - -/** - * s3c_hsudc_alloc_request - Allocate a new request. - * @_ep: Endpoint for which request is allocated (not used). - * @gfp_flags: Flags used for the allocation. - * - * Allocates a single transfer request structure when called from gadget driver. - */ -static struct usb_request *s3c_hsudc_alloc_request(struct usb_ep *_ep, - gfp_t gfp_flags) -{ - struct s3c_hsudc_req *hsreq; - - hsreq = kzalloc(sizeof(*hsreq), gfp_flags); - if (!hsreq) - return NULL; - - INIT_LIST_HEAD(&hsreq->queue); - return &hsreq->req; -} - -/** - * s3c_hsudc_free_request - Deallocate a request. - * @ep: Endpoint for which request is deallocated (not used). - * @_req: Request to be deallocated. - * - * Allocates a single transfer request structure when called from gadget driver. - */ -static void s3c_hsudc_free_request(struct usb_ep *ep, struct usb_request *_req) -{ - struct s3c_hsudc_req *hsreq; - - hsreq = our_req(_req); - WARN_ON(!list_empty(&hsreq->queue)); - kfree(hsreq); -} - -/** - * s3c_hsudc_queue - Queue a transfer request for the endpoint. - * @_ep: Endpoint for which the request is queued. - * @_req: Request to be queued. - * @gfp_flags: Not used. - * - * Start or enqueue a request for a endpoint when called from gadget driver. - */ -static int s3c_hsudc_queue(struct usb_ep *_ep, struct usb_request *_req, - gfp_t gfp_flags) -{ - struct s3c_hsudc_req *hsreq; - struct s3c_hsudc_ep *hsep; - struct s3c_hsudc *hsudc; - unsigned long flags; - u32 offset; - u32 csr; - - hsreq = our_req(_req); - if ((!_req || !_req->complete || !_req->buf || - !list_empty(&hsreq->queue))) - return -EINVAL; - - hsep = our_ep(_ep); - hsudc = hsep->dev; - if (!hsudc->driver || hsudc->gadget.speed == USB_SPEED_UNKNOWN) - return -ESHUTDOWN; - - spin_lock_irqsave(&hsudc->lock, flags); - set_index(hsudc, hsep->bEndpointAddress); - - _req->status = -EINPROGRESS; - _req->actual = 0; - - if (!ep_index(hsep) && _req->length == 0) { - hsudc->ep0state = WAIT_FOR_SETUP; - s3c_hsudc_complete_request(hsep, hsreq, 0); - spin_unlock_irqrestore(&hsudc->lock, flags); - return 0; - } - - if (list_empty(&hsep->queue) && !hsep->stopped) { - offset = (ep_index(hsep)) ? S3C_ESR : S3C_EP0SR; - if (ep_is_in(hsep)) { - csr = readl(hsudc->regs + offset); - if (!(csr & S3C_ESR_TX_SUCCESS) && - (s3c_hsudc_write_fifo(hsep, hsreq) == 1)) - hsreq = NULL; - } else { - csr = readl(hsudc->regs + offset); - if ((csr & S3C_ESR_RX_SUCCESS) - && (s3c_hsudc_read_fifo(hsep, hsreq) == 1)) - hsreq = NULL; - } - } - - if (hsreq) - list_add_tail(&hsreq->queue, &hsep->queue); - - spin_unlock_irqrestore(&hsudc->lock, flags); - return 0; -} - -/** - * s3c_hsudc_dequeue - Dequeue a transfer request from an endpoint. - * @_ep: Endpoint from which the request is dequeued. - * @_req: Request to be dequeued. - * - * Dequeue a request from a endpoint when called from gadget driver. - */ -static int s3c_hsudc_dequeue(struct usb_ep *_ep, struct usb_request *_req) -{ - struct s3c_hsudc_ep *hsep = our_ep(_ep); - struct s3c_hsudc *hsudc = hsep->dev; - struct s3c_hsudc_req *hsreq = NULL, *iter; - unsigned long flags; - - hsep = our_ep(_ep); - if (!_ep || hsep->ep.name == ep0name) - return -EINVAL; - - spin_lock_irqsave(&hsudc->lock, flags); - - list_for_each_entry(iter, &hsep->queue, queue) { - if (&iter->req != _req) - continue; - hsreq = iter; - break; - } - if (!hsreq) { - spin_unlock_irqrestore(&hsudc->lock, flags); - return -EINVAL; - } - - set_index(hsudc, hsep->bEndpointAddress); - s3c_hsudc_complete_request(hsep, hsreq, -ECONNRESET); - - spin_unlock_irqrestore(&hsudc->lock, flags); - return 0; -} - -static const struct usb_ep_ops s3c_hsudc_ep_ops = { - .enable = s3c_hsudc_ep_enable, - .disable = s3c_hsudc_ep_disable, - .alloc_request = s3c_hsudc_alloc_request, - .free_request = s3c_hsudc_free_request, - .queue = s3c_hsudc_queue, - .dequeue = s3c_hsudc_dequeue, - .set_halt = s3c_hsudc_set_halt, - .set_wedge = s3c_hsudc_set_wedge, -}; - -/** - * s3c_hsudc_initep - Initialize a endpoint to default state. - * @hsudc - Reference to the device controller. - * @hsep - Endpoint to be initialized. - * @epnum - Address to be assigned to the endpoint. - * - * Initialize a endpoint with default configuration. - */ -static void s3c_hsudc_initep(struct s3c_hsudc *hsudc, - struct s3c_hsudc_ep *hsep, int epnum) -{ - char *dir; - - if ((epnum % 2) == 0) { - dir = "out"; - } else { - dir = "in"; - hsep->bEndpointAddress = USB_DIR_IN; - } - - hsep->bEndpointAddress |= epnum; - if (epnum) - snprintf(hsep->name, sizeof(hsep->name), "ep%d%s", epnum, dir); - else - snprintf(hsep->name, sizeof(hsep->name), "%s", ep0name); - - INIT_LIST_HEAD(&hsep->queue); - INIT_LIST_HEAD(&hsep->ep.ep_list); - if (epnum) - list_add_tail(&hsep->ep.ep_list, &hsudc->gadget.ep_list); - - hsep->dev = hsudc; - hsep->ep.name = hsep->name; - usb_ep_set_maxpacket_limit(&hsep->ep, epnum ? 512 : 64); - hsep->ep.ops = &s3c_hsudc_ep_ops; - hsep->fifo = hsudc->regs + S3C_BR(epnum); - hsep->ep.desc = NULL; - hsep->stopped = 0; - hsep->wedge = 0; - - if (epnum == 0) { - hsep->ep.caps.type_control = true; - hsep->ep.caps.dir_in = true; - hsep->ep.caps.dir_out = true; - } else { - hsep->ep.caps.type_iso = true; - hsep->ep.caps.type_bulk = true; - hsep->ep.caps.type_int = true; - } - - if (epnum & 1) - hsep->ep.caps.dir_in = true; - else - hsep->ep.caps.dir_out = true; - - set_index(hsudc, epnum); - writel(hsep->ep.maxpacket, hsudc->regs + S3C_MPR); -} - -/** - * s3c_hsudc_setup_ep - Configure all endpoints to default state. - * @hsudc: Reference to device controller. - * - * Configures all endpoints to default state. - */ -static void s3c_hsudc_setup_ep(struct s3c_hsudc *hsudc) -{ - int epnum; - - hsudc->ep0state = WAIT_FOR_SETUP; - INIT_LIST_HEAD(&hsudc->gadget.ep_list); - for (epnum = 0; epnum < hsudc->pd->epnum; epnum++) - s3c_hsudc_initep(hsudc, &hsudc->ep[epnum], epnum); -} - -/** - * s3c_hsudc_reconfig - Reconfigure the device controller to default state. - * @hsudc: Reference to device controller. - * - * Reconfigures the device controller registers to a default state. - */ -static void s3c_hsudc_reconfig(struct s3c_hsudc *hsudc) -{ - writel(0xAA, hsudc->regs + S3C_EDR); - writel(1, hsudc->regs + S3C_EIER); - writel(0, hsudc->regs + S3C_TR); - writel(S3C_SCR_DTZIEN_EN | S3C_SCR_RRD_EN | S3C_SCR_SUS_EN | - S3C_SCR_RST_EN, hsudc->regs + S3C_SCR); - writel(0, hsudc->regs + S3C_EP0CR); - - s3c_hsudc_setup_ep(hsudc); -} - -/** - * s3c_hsudc_irq - Interrupt handler for device controller. - * @irq: Not used. - * @_dev: Reference to the device controller. - * - * Interrupt handler for the device controller. This handler handles controller - * interrupts and endpoint interrupts. - */ -static irqreturn_t s3c_hsudc_irq(int irq, void *_dev) -{ - struct s3c_hsudc *hsudc = _dev; - struct s3c_hsudc_ep *hsep; - u32 ep_intr; - u32 sys_status; - u32 ep_idx; - - spin_lock(&hsudc->lock); - - sys_status = readl(hsudc->regs + S3C_SSR); - ep_intr = readl(hsudc->regs + S3C_EIR) & 0x3FF; - - if (!ep_intr && !(sys_status & S3C_SSR_DTZIEN_EN)) { - spin_unlock(&hsudc->lock); - return IRQ_HANDLED; - } - - if (sys_status) { - if (sys_status & S3C_SSR_VBUSON) - writel(S3C_SSR_VBUSON, hsudc->regs + S3C_SSR); - - if (sys_status & S3C_SSR_ERR) - writel(S3C_SSR_ERR, hsudc->regs + S3C_SSR); - - if (sys_status & S3C_SSR_SDE) { - writel(S3C_SSR_SDE, hsudc->regs + S3C_SSR); - hsudc->gadget.speed = (sys_status & S3C_SSR_HSP) ? - USB_SPEED_HIGH : USB_SPEED_FULL; - } - - if (sys_status & S3C_SSR_SUSPEND) { - writel(S3C_SSR_SUSPEND, hsudc->regs + S3C_SSR); - if (hsudc->gadget.speed != USB_SPEED_UNKNOWN - && hsudc->driver && hsudc->driver->suspend) - hsudc->driver->suspend(&hsudc->gadget); - } - - if (sys_status & S3C_SSR_RESUME) { - writel(S3C_SSR_RESUME, hsudc->regs + S3C_SSR); - if (hsudc->gadget.speed != USB_SPEED_UNKNOWN - && hsudc->driver && hsudc->driver->resume) - hsudc->driver->resume(&hsudc->gadget); - } - - if (sys_status & S3C_SSR_RESET) { - writel(S3C_SSR_RESET, hsudc->regs + S3C_SSR); - for (ep_idx = 0; ep_idx < hsudc->pd->epnum; ep_idx++) { - hsep = &hsudc->ep[ep_idx]; - hsep->stopped = 1; - s3c_hsudc_nuke_ep(hsep, -ECONNRESET); - } - s3c_hsudc_reconfig(hsudc); - hsudc->ep0state = WAIT_FOR_SETUP; - } - } - - if (ep_intr & S3C_EIR_EP0) { - writel(S3C_EIR_EP0, hsudc->regs + S3C_EIR); - set_index(hsudc, 0); - s3c_hsudc_handle_ep0_intr(hsudc); - } - - ep_intr >>= 1; - ep_idx = 1; - while (ep_intr) { - if (ep_intr & 1) { - hsep = &hsudc->ep[ep_idx]; - set_index(hsudc, ep_idx); - writel(1 << ep_idx, hsudc->regs + S3C_EIR); - if (ep_is_in(hsep)) - s3c_hsudc_epin_intr(hsudc, ep_idx); - else - s3c_hsudc_epout_intr(hsudc, ep_idx); - } - ep_intr >>= 1; - ep_idx++; - } - - spin_unlock(&hsudc->lock); - return IRQ_HANDLED; -} - -static int s3c_hsudc_start(struct usb_gadget *gadget, - struct usb_gadget_driver *driver) -{ - struct s3c_hsudc *hsudc = to_hsudc(gadget); - int ret; - - if (!driver - || driver->max_speed < USB_SPEED_FULL - || !driver->setup) - return -EINVAL; - - if (!hsudc) - return -ENODEV; - - if (hsudc->driver) - return -EBUSY; - - hsudc->driver = driver; - - ret = regulator_bulk_enable(ARRAY_SIZE(hsudc->supplies), - hsudc->supplies); - if (ret != 0) { - dev_err(hsudc->dev, "failed to enable supplies: %d\n", ret); - goto err_supplies; - } - - /* connect to bus through transceiver */ - if (!IS_ERR_OR_NULL(hsudc->transceiver)) { - ret = otg_set_peripheral(hsudc->transceiver->otg, - &hsudc->gadget); - if (ret) { - dev_err(hsudc->dev, "%s: can't bind to transceiver\n", - hsudc->gadget.name); - goto err_otg; - } - } - - enable_irq(hsudc->irq); - s3c_hsudc_reconfig(hsudc); - - pm_runtime_get_sync(hsudc->dev); - - if (hsudc->pd->phy_init) - hsudc->pd->phy_init(); - if (hsudc->pd->gpio_init) - hsudc->pd->gpio_init(); - - return 0; -err_otg: - regulator_bulk_disable(ARRAY_SIZE(hsudc->supplies), hsudc->supplies); -err_supplies: - hsudc->driver = NULL; - return ret; -} - -static int s3c_hsudc_stop(struct usb_gadget *gadget) -{ - struct s3c_hsudc *hsudc = to_hsudc(gadget); - unsigned long flags; - - if (!hsudc) - return -ENODEV; - - spin_lock_irqsave(&hsudc->lock, flags); - hsudc->gadget.speed = USB_SPEED_UNKNOWN; - if (hsudc->pd->phy_uninit) - hsudc->pd->phy_uninit(); - - pm_runtime_put(hsudc->dev); - - if (hsudc->pd->gpio_uninit) - hsudc->pd->gpio_uninit(); - s3c_hsudc_stop_activity(hsudc); - spin_unlock_irqrestore(&hsudc->lock, flags); - - if (!IS_ERR_OR_NULL(hsudc->transceiver)) - (void) otg_set_peripheral(hsudc->transceiver->otg, NULL); - - disable_irq(hsudc->irq); - - regulator_bulk_disable(ARRAY_SIZE(hsudc->supplies), hsudc->supplies); - hsudc->driver = NULL; - - return 0; -} - -static inline u32 s3c_hsudc_read_frameno(struct s3c_hsudc *hsudc) -{ - return readl(hsudc->regs + S3C_FNR) & 0x3FF; -} - -static int s3c_hsudc_gadget_getframe(struct usb_gadget *gadget) -{ - return s3c_hsudc_read_frameno(to_hsudc(gadget)); -} - -static int s3c_hsudc_vbus_draw(struct usb_gadget *gadget, unsigned mA) -{ - struct s3c_hsudc *hsudc = to_hsudc(gadget); - - if (!hsudc) - return -ENODEV; - - if (!IS_ERR_OR_NULL(hsudc->transceiver)) - return usb_phy_set_power(hsudc->transceiver, mA); - - return -EOPNOTSUPP; -} - -static const struct usb_gadget_ops s3c_hsudc_gadget_ops = { - .get_frame = s3c_hsudc_gadget_getframe, - .udc_start = s3c_hsudc_start, - .udc_stop = s3c_hsudc_stop, - .vbus_draw = s3c_hsudc_vbus_draw, -}; - -static int s3c_hsudc_probe(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - struct s3c_hsudc *hsudc; - struct s3c24xx_hsudc_platdata *pd = dev_get_platdata(&pdev->dev); - int ret, i; - - hsudc = devm_kzalloc(&pdev->dev, struct_size(hsudc, ep, pd->epnum), - GFP_KERNEL); - if (!hsudc) - return -ENOMEM; - - platform_set_drvdata(pdev, dev); - hsudc->dev = dev; - hsudc->pd = dev_get_platdata(&pdev->dev); - - hsudc->transceiver = usb_get_phy(USB_PHY_TYPE_USB2); - - for (i = 0; i < ARRAY_SIZE(hsudc->supplies); i++) - hsudc->supplies[i].supply = s3c_hsudc_supply_names[i]; - - ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(hsudc->supplies), - hsudc->supplies); - if (ret != 0) { - if (ret != -EPROBE_DEFER) - dev_err(dev, "failed to request supplies: %d\n", ret); - goto err_supplies; - } - - hsudc->regs = devm_platform_ioremap_resource(pdev, 0); - if (IS_ERR(hsudc->regs)) { - ret = PTR_ERR(hsudc->regs); - goto err_res; - } - - spin_lock_init(&hsudc->lock); - - hsudc->gadget.max_speed = USB_SPEED_HIGH; - hsudc->gadget.ops = &s3c_hsudc_gadget_ops; - hsudc->gadget.name = dev_name(dev); - hsudc->gadget.ep0 = &hsudc->ep[0].ep; - hsudc->gadget.is_otg = 0; - hsudc->gadget.is_a_peripheral = 0; - hsudc->gadget.speed = USB_SPEED_UNKNOWN; - - s3c_hsudc_setup_ep(hsudc); - - ret = platform_get_irq(pdev, 0); - if (ret < 0) - goto err_res; - hsudc->irq = ret; - - ret = devm_request_irq(&pdev->dev, hsudc->irq, s3c_hsudc_irq, 0, - driver_name, hsudc); - if (ret < 0) { - dev_err(dev, "irq request failed\n"); - goto err_res; - } - - hsudc->uclk = devm_clk_get(&pdev->dev, "usb-device"); - if (IS_ERR(hsudc->uclk)) { - dev_err(dev, "failed to find usb-device clock source\n"); - ret = PTR_ERR(hsudc->uclk); - goto err_res; - } - clk_enable(hsudc->uclk); - - local_irq_disable(); - - disable_irq(hsudc->irq); - local_irq_enable(); - - ret = usb_add_gadget_udc(&pdev->dev, &hsudc->gadget); - if (ret) - goto err_add_udc; - - pm_runtime_enable(dev); - - return 0; -err_add_udc: - clk_disable(hsudc->uclk); -err_res: - if (!IS_ERR_OR_NULL(hsudc->transceiver)) - usb_put_phy(hsudc->transceiver); - -err_supplies: - return ret; -} - -static struct platform_driver s3c_hsudc_driver = { - .driver = { - .name = "s3c-hsudc", - }, - .probe = s3c_hsudc_probe, -}; - -module_platform_driver(s3c_hsudc_driver); - -MODULE_DESCRIPTION("Samsung S3C24XX USB high-speed controller driver"); -MODULE_AUTHOR("Thomas Abraham <thomas.ab@samsung.com>"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:s3c-hsudc"); |