diff options
Diffstat (limited to 'include/uapi/linux/gpio.h')
-rw-r--r-- | include/uapi/linux/gpio.h | 63 |
1 files changed, 33 insertions, 30 deletions
diff --git a/include/uapi/linux/gpio.h b/include/uapi/linux/gpio.h index cb9966d49a16..f7cb8ae87df7 100644 --- a/include/uapi/linux/gpio.h +++ b/include/uapi/linux/gpio.h @@ -67,7 +67,7 @@ struct gpiochip_info { * @GPIO_V2_LINE_FLAG_BIAS_DISABLED: line has bias disabled * @GPIO_V2_LINE_FLAG_EVENT_CLOCK_REALTIME: line events contain REALTIME timestamps * @GPIO_V2_LINE_FLAG_EVENT_CLOCK_HTE: line events contain timestamps from - * hardware timestamp engine + * the hardware timestamping engine (HTE) subsystem */ enum gpio_v2_line_flag { GPIO_V2_LINE_FLAG_USED = _BITULL(0), @@ -88,10 +88,10 @@ enum gpio_v2_line_flag { /** * struct gpio_v2_line_values - Values of GPIO lines * @bits: a bitmap containing the value of the lines, set to 1 for active - * and 0 for inactive. + * and 0 for inactive * @mask: a bitmap identifying the lines to get or set, with each bit * number corresponding to the index into &struct - * gpio_v2_line_request.offsets. + * gpio_v2_line_request.offsets */ struct gpio_v2_line_values { __aligned_u64 bits; @@ -123,7 +123,7 @@ enum gpio_v2_line_attr_id { * @values: if id is %GPIO_V2_LINE_ATTR_ID_OUTPUT_VALUES, a bitmap * containing the values to which the lines will be set, with each bit * number corresponding to the index into &struct - * gpio_v2_line_request.offsets. + * gpio_v2_line_request.offsets * @debounce_period_us: if id is %GPIO_V2_LINE_ATTR_ID_DEBOUNCE, the * desired debounce period, in microseconds */ @@ -143,7 +143,7 @@ struct gpio_v2_line_attribute { * @attr: the configurable attribute * @mask: a bitmap identifying the lines to which the attribute applies, * with each bit number corresponding to the index into &struct - * gpio_v2_line_request.offsets. + * gpio_v2_line_request.offsets */ struct gpio_v2_line_config_attribute { struct gpio_v2_line_attribute attr; @@ -178,7 +178,7 @@ struct gpio_v2_line_config { * associated GPIO chip * @consumer: a desired consumer label for the selected GPIO lines such as * "my-bitbanged-relay" - * @config: requested configuration for the lines. + * @config: requested configuration for the lines * @num_lines: number of lines requested in this request, i.e. the number * of valid fields in the %GPIO_V2_LINES_MAX sized arrays, set to 1 to * request a single line @@ -189,9 +189,8 @@ struct gpio_v2_line_config { * buffer. If this field is zero then the buffer size defaults to a minimum * of @num_lines * 16. * @padding: reserved for future use and must be zero filled - * @fd: if successful this field will contain a valid anonymous file handle - * after a %GPIO_GET_LINE_IOCTL operation, zero or negative value means - * error + * @fd: after a successful %GPIO_V2_GET_LINE_IOCTL operation, contains + * a valid anonymous file descriptor representing the request */ struct gpio_v2_line_request { __u32 offsets[GPIO_V2_LINES_MAX]; @@ -217,7 +216,7 @@ struct gpio_v2_line_request { * @num_attrs: the number of attributes in @attrs * @flags: flags for this GPIO line, with values from &enum * gpio_v2_line_flag, such as %GPIO_V2_LINE_FLAG_ACTIVE_LOW, - * %GPIO_V2_LINE_FLAG_OUTPUT etc, added together. + * %GPIO_V2_LINE_FLAG_OUTPUT etc, added together * @attrs: the configuration attributes associated with the line * @padding: reserved for future use */ @@ -274,7 +273,7 @@ enum gpio_v2_line_event_id { /** * struct gpio_v2_line_event - The actual event being pushed to userspace - * @timestamp_ns: best estimate of time of event occurrence, in nanoseconds. + * @timestamp_ns: best estimate of time of event occurrence, in nanoseconds * @id: event identifier with value from &enum gpio_v2_line_event_id * @offset: the offset of the line that triggered the event * @seqno: the sequence number for this event in the sequence of events for @@ -289,6 +288,10 @@ enum gpio_v2_line_event_id { * * If the %GPIO_V2_LINE_FLAG_EVENT_CLOCK_REALTIME flag is set then the * @timestamp_ns is read from %CLOCK_REALTIME. + * + * If the %GPIO_V2_LINE_FLAG_EVENT_CLOCK_HTE flag is set then the + * @timestamp_ns is provided by the hardware timestamping engine (HTE) + * subsystem. */ struct gpio_v2_line_event { __aligned_u64 timestamp_ns; @@ -330,7 +333,7 @@ struct gpio_v2_line_event { * also be empty if the consumer doesn't set this up * * Note: This struct is part of ABI v1 and is deprecated. - * Use &struct gpio_v2_line_info instead. + * Use ABI v2 and &struct gpio_v2_line_info instead. */ struct gpioline_info { __u32 line_offset; @@ -365,7 +368,7 @@ enum { * at the end of the structure on 64-bit architectures. * * Note: This struct is part of ABI v1 and is deprecated. - * Use &struct gpio_v2_line_info_changed instead. + * Use ABI v2 and &struct gpio_v2_line_info_changed instead. */ struct gpioline_info_changed { struct gpioline_info info; @@ -396,18 +399,17 @@ struct gpioline_info_changed { * a batch of input or output lines, but they must all have the same * characteristics, i.e. all inputs or all outputs, all active low etc * @default_values: if the %GPIOHANDLE_REQUEST_OUTPUT is set for a requested - * line, this specifies the default output value, should be 0 (low) or - * 1 (high), anything else than 0 or 1 will be interpreted as 1 (high) + * line, this specifies the default output value, should be 0 (inactive) or + * 1 (active). Anything other than 0 or 1 will be interpreted as active. * @consumer_label: a desired consumer label for the selected GPIO line(s) * such as "my-bitbanged-relay" * @lines: number of lines requested in this request, i.e. the number of * valid fields in the above arrays, set to 1 to request a single line - * @fd: if successful this field will contain a valid anonymous file handle - * after a %GPIO_GET_LINEHANDLE_IOCTL operation, zero or negative value - * means error + * @fd: after a successful %GPIO_GET_LINEHANDLE_IOCTL operation, contains + * a valid anonymous file descriptor representing the request * * Note: This struct is part of ABI v1 and is deprecated. - * Use &struct gpio_v2_line_request instead. + * Use ABI v2 and &struct gpio_v2_line_request instead. */ struct gpiohandle_request { __u32 lineoffsets[GPIOHANDLES_MAX]; @@ -424,12 +426,12 @@ struct gpiohandle_request { * %GPIOHANDLE_REQUEST_OUTPUT, %GPIOHANDLE_REQUEST_ACTIVE_LOW etc, added * together * @default_values: if the %GPIOHANDLE_REQUEST_OUTPUT is set in flags, - * this specifies the default output value, should be 0 (low) or - * 1 (high), anything else than 0 or 1 will be interpreted as 1 (high) + * this specifies the default output value, should be 0 (inactive) or + * 1 (active). Anything other than 0 or 1 will be interpreted as active. * @padding: reserved for future use and should be zero filled * * Note: This struct is part of ABI v1 and is deprecated. - * Use &struct gpio_v2_line_config instead. + * Use ABI v2 and &struct gpio_v2_line_config instead. */ struct gpiohandle_config { __u32 flags; @@ -441,10 +443,11 @@ struct gpiohandle_config { * struct gpiohandle_data - Information of values on a GPIO handle * @values: when getting the state of lines this contains the current * state of a line, when setting the state of lines these should contain - * the desired target state + * the desired target state. States are 0 (inactive) or 1 (active). + * When setting, anything other than 0 or 1 will be interpreted as active. * * Note: This struct is part of ABI v1 and is deprecated. - * Use &struct gpio_v2_line_values instead. + * Use ABI v2 and &struct gpio_v2_line_values instead. */ struct gpiohandle_data { __u8 values[GPIOHANDLES_MAX]; @@ -465,12 +468,11 @@ struct gpiohandle_data { * %GPIOEVENT_REQUEST_RISING_EDGE or %GPIOEVENT_REQUEST_FALLING_EDGE * @consumer_label: a desired consumer label for the selected GPIO line(s) * such as "my-listener" - * @fd: if successful this field will contain a valid anonymous file handle - * after a %GPIO_GET_LINEEVENT_IOCTL operation, zero or negative value - * means error + * @fd: after a successful %GPIO_GET_LINEEVENT_IOCTL operation, contains a + * valid anonymous file descriptor representing the request * * Note: This struct is part of ABI v1 and is deprecated. - * Use &struct gpio_v2_line_request instead. + * Use ABI v2 and &struct gpio_v2_line_request instead. */ struct gpioevent_request { __u32 lineoffset; @@ -489,10 +491,11 @@ struct gpioevent_request { /** * struct gpioevent_data - The actual event being pushed to userspace * @timestamp: best estimate of time of event occurrence, in nanoseconds - * @id: event identifier + * @id: event identifier, one of %GPIOEVENT_EVENT_RISING_EDGE or + * %GPIOEVENT_EVENT_FALLING_EDGE * * Note: This struct is part of ABI v1 and is deprecated. - * Use &struct gpio_v2_line_event instead. + * Use ABI v2 and &struct gpio_v2_line_event instead. */ struct gpioevent_data { __u64 timestamp; |