| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The reset GPIO of WCD9390/WCD9395 is active low and that's how it is
routed on typical boards, so correct the example DTS to use expected
polarity, instead of IRQ flag (which is a logical mistake on its own).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240806114931.40090-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The reset GPIO of WCD9380/WCD9385 is active low and that's how it is
routed on typical boards, so correct the example DTS to use expected
polarity.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240806114931.40090-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The reset GPIO of WCD9340/WCD9341 is active low and that's how it is
routed on typical boards, so correct the example DTS to use expected
polarity.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240806114931.40090-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The reset GPIO of WCD9370/WCD9375 is active low and that's how it is
routed on typical boards, so correct the example DTS to use expected
polarity.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240806114931.40090-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert the Cirrus Logic CS42448/CS42888 audio CODEC bindings to DT
schema format. Set power supply properties to required only for CS42888.
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Animesh Agarwal <animeshagarwal28@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240710072756.99765-1-animeshagarwal28@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Rayyan Ansari <rayyan.ansari@linaro.org>:
These patches convert the remaining plain text bindings for Qualcomm
sound drivers to dt schema, so device trees can be validated against
them.
|
|
Convert the Cirrus Logic CS4270 audio CODEC bindings to DT schema. Add
missing va-supply, vd-supply and vlc-supply properties, because they
are already being used in the DTS and the driver for this device.
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Animesh Agarwal <animeshagarwal28@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240709184231.125207-1-animeshagarwal28@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Remove old txt bindings and add apq8096 soundcard entry to existing
dt schema.
Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240710113833.39859-4-rayyan.ansari@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert the Qualcomm MSM8916 WCD Digital Audio Codec bindings from text
to yaml dt schema format.
Make bindings complete by adding #sound-dai-cells.
Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240710113833.39859-2-rayyan.ansari@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The S/PDIF audio card support with compatible "fsl,imx-audio-spdif"
was merged from imx-spdif into the fsl-asoc-card driver.
It makes possible to use an S/PDIF with an ASRC.
This merge introduces new DT bindings to use with compatible
"fsl,imx-audio-spdif" to follow the way fsl-asoc-card works:
* the "spdif-controller" property from imx-spdif is named "audio-cpu"
in fsl-asoc-card.
* fsl-asoc-card uses codecs explicitly declared in DT
with "audio-codec".
With an SPDIF, codec drivers spdif_transmitter and
spdif_receiver should be used.
Driver imx-spdif used instead the dummy codec and a pair of
boolean properties, "spdif-in" and "spdif-out".
In an upcoming commit, in-tree DTs will be modified to follow these new
properties:
* Property "spdif-controller" will be renamed "audio-cpu".
* spdif_transmitter and spdif_receiver nodes will be declared
and linked to the fsl-asoc-card node with the property "audio-codec".
To keep backward compatibility with other DTs, support for
"spdif-controller", "spdif-in" and "spdif-out" properties is kept.
However, it is recommended to use the new properties if possible.
It is better to declare transmitter and/or receiver
in DT than using the dummy codec.
DTs using compatible "fsl,imx-audio-spdif" are still supported, and
fsl-asoc-card will behave the same as imx-spdif for these DTs.
Signed-off-by: Elinor Montmasson <elinor.montmasson@savoirfairelinux.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240627083104.123357-6-elinor.montmasson@savoirfairelinux.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The QMC audio uses one QMC channel per DAI and uses this QMC channel to
transmit interleaved audio channel samples.
In order to work in non-interleave mode, a QMC audio DAI needs to use
multiple QMC channels. In that case, the DAI maps each QMC channel to
exactly one audio channel.
Allow QMC audio DAIs with multiple QMC channels attached.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240701113038.55144-10-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Maxim Kochetkov <fido_max@inbox.ru>:
nau8824 has external MCLK pin. So add enable/disable external clock
management.
|
|
Convert the RT5650/RT5645 audio CODEC bindings to DT schema.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Animesh Agarwal <animeshagarwal28@gmail.com>
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20240702120106.17100-1-animeshagarwal28@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use master clock "mclk" if provided through device tree.
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240701211631.92384-2-fido_max@inbox.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
simple-audio-mux is designed to be used generally, thus "Input 1" or
"Input 2" are used to selecting MUX input. This numbered inputs would work,
but might be not user friendly in some case, for example in case of system
hardware design has some clear labels.
Adds new "state-labels" property and enable to select MUX by own state names.
Original
> amixer set "MUX" "Input 1"
> amixer set "MUX" "Input 2"
Use mux-names
sound_mux: mux {
compatible = "simple-audio-mux";
mux-gpios = <...>;
=> state-labels = "Label_A", "Label_B";
};
> amixer set "MUX" "Label_A"
> amixer set "MUX" "Label_B"
|
|
Merge series from srinivas.kandagatla@linaro.org:
Existing way of allocating soundwire master ports on Qualcommm platforms is
dynamic, and in linear order starting from 1 to MAX_PORTS.
This will work as long as soundwire device ports are 1:1 mapped
linearly. However on most Qcom SoCs like SM8550, SM8650, x1e80100, these
are NOT mapped in that order.
The result of this is that only one speaker among the pair of speakers
is always silent, With recent changes for WSA codec to support codec
versions and along with these patches we are able to get all speakers
working on these SoCs.
|
|
Convert the RT5677 audio CODEC bindings to DT schema.
Signed-off-by: Animesh Agarwal <animeshagarwal28@gmail.com>
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240627105030.14360-1-animeshagarwal28@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Document port mapping property for wsa884x. Port mapping is required
to be able map correct master ports.
All the device ports are not mapped in same order as master ports, so
there is a need for having static port mapping for WSA codecs.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://patch.msgid.link/20240626-port-map-v2-3-6cc1c5608cdd@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Document port mapping property for wsa883x. Port mapping is required
to be able map correct master ports for VI feedback.
All the device ports are not mapped in same order as master ports, so
there is a need for having static port mapping for WSA codecs.
Signed-off-by: Manikantan R <quic_manrav@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://patch.msgid.link/20240626-port-map-v2-1-6cc1c5608cdd@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
simple-audio-mux is designed to be used generally, thus "Input 1" or
"Input 2" are used to selecting MUX input. This numbered inputs would
work, but might be not user friendly in some case, for example in case
of system hardware design has some clear labels.
Adds new "state-labels" property and enable to select MUX by own state
names.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/87le2m7xp8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert the RT5659/RT5658 audio CODEC bindings to DT schema.
Signed-off-by: Animesh Agarwal <animeshagarwal28@gmail.com>
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240624132949.124228-1-animeshagarwal28@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add compatible string for i.MX95 platform which supports audio
function through rpmsg channel between Cortex-A and Cortex-M core.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240626071202.7149-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Piotr Wojtaszczyk <piotr.wojtaszczyk@timesys.com>:
This pach set is to bring back audio to machines with a LPC32XX CPU.
The legacy LPC32XX SoC used to have audio spport in linux 2.6.27.
The support was dropped due to lack of interest from mainaeners.
|
|
On i.MX8MP, there are 3 interrupts, the third interrupt is
SPDIF wakeup interrupt from PHY
Add ref: dai-common.yaml for #sound-dai-cells is needed and
XCVR is a DAI device.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/1719481981-4069-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add nxp,lpc3220-i2s DT binding documentation.
Signed-off-by: Piotr Wojtaszczyk <piotr.wojtaszczyk@timesys.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240627150046.258795-4-piotr.wojtaszczyk@timesys.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
Introduce the ability for sound cards to manually order the startup of
the various components in the card.
|
|
Like "audio-routing" drop the minItems: 2 from the "audio-widgets", because
any limit here - lower or upper- is rather meaningless.
This will also fix `dtbs_check` warnings like:
sound: audio-widgets: ['Speaker', '7J4-14 LEFT', 'Speaker', '7J4-11 RIGHT'] is too long
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240605-topic-amlogic-upstream-bindings-fixes-audio-widgets-v1-1-65bd7cc2e09b@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Sound Card need to consider/adjust HW control ordering based on the
combination of CPU/Codec. The controlling feature is already supported
on ASoC, but Simple Audio Card / Audio Graph Card still not support it.
Let's support it.
Cc: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87sexizojx.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
This is v3 patch-set for ak4619 driver.
It was created by Khanh, and I updated/adjusted to upstream.
It was tested on Renesas V4M GrayH
Link: https://lore.kernel.org/r/877ceotnrg.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87frtb3x4k.wl-kuninori.morimoto.gx@renesas.com
|
|
Merge series from Christian Hewitt <christianshewitt@gmail.com>:
Update bindings and add a driver compatible for the pcm5242
chip used on the Odroid HiFi-Shield2 i2c mezzanine board.
|
|
Merge series from Neil Armstrong <neil.armstrong@linaro.org>:
Convert the text bindings of the Everest ES7241/ES7134/7144/7154 2 channels
I2S analog to digital converter to dt-schema.
|
|
Merge series from Ricard Wanderlof <ricard.wanderlof@axis.com>:
In some cases, depending on system design, the MICBIAS pins on the
chip are not needed as such, but a couple of extra GPIO pins would be
useful. This patch allows the MICBIAS pins to be configured in the
device tree as general purpose output pins, controlled via the GPIO
framework.
Owing to their originally intended purpose there are some limitations:
when the MICBIAS pins are deactivated, they will float, so will likely
need a pulldown in many applications. When activated, they will
assume the voltage specified by the micbias1-vg and micbias2-vg
properties, respectively, meaning that the resulting output voltage
will be 2.0 V, 2.5 V or AVDD .
|
|
Add ti,pcm5242 to the pcm512x driver file
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Link: https://patch.msgid.link/20240622131245.2607533-2-christianshewitt@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add the YAML DT bindings for the cs530x high performance
audio ADCs.
Signed-off-by: Paul Handrigan <paulha@opensource.cirrus.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240621151757.1661265-2-paulha@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert the text bindings of the Everest ES7134/7144/7154 2 channels
I2S analog to digital converter to dt-schema.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20240620-topic-amlogic-upstream-bindings-convert-everest-v2-2-660985615522@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert the text biddings for the Everest ES7241 2 channels I2S analog
to digital converter to dt-schema.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20240620-topic-amlogic-upstream-bindings-convert-everest-v2-1-660985615522@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Many Sound yaml files doesn't have vender prefix on filename.
Add missing vender prefix for these files.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/87wmmkpi6w.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add Asahi Kasei ak4619 audio codec bindings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/87h6dpwxug.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add device tree property to define auxiliary devices to be added to
Audio Graph Card which is already supported on Simle Card.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/87jzin3yc8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add properties for configuring the MICBIAS pins as general purpose
outputs, with some limitations: The voltage on the pin when activated
may be set using another property to 2.0 V, 2.5 V or AVDD.
When deactivated the pin will float.
Signed-off-by: Ricard Wanderlof <ricard.wanderlof@axis.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240607-tlv320adc3xxx-micbias-gpo-v3-1-59dbec8b98f4@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert the RT5514 audio CODEC bindings to DT Schema. Make bindings
complete by adding 'spi-max-frequency', 'wakeup-source' properties.
Signed-off-by: Animesh Agarwal <animeshagarwal28@gmail.com>
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://msgid.link/r/20240616095223.260786-1-animeshagarwal28@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert the ALC5631/RT5631 audio CODEC bindings to DT Schema.
Signed-off-by: Animesh Agarwal <animeshagarwal28@gmail.com>
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://msgid.link/r/20240616074936.151267-1-animeshagarwal28@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert the max98088 audio codec txt bindings to DT schema.
Signed-off-by: Abdulrasaq Lawani <abdulrasaqolawani@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240612163730.515819-1-abdulrasaqolawani@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert the text bindings for the Texas Instruments
TAS5711/TAS5717/TAS5719/TAS5721 stereo power amplifiers to
dt-schema.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240611-topic-amlogic-upstream-bindings-convert-tas57xx-v2-1-38269edc1d95@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert the WM8804 audio codec bindings to DT schema.
Signed-off-by: Animesh Agarwal <animeshagarwal28@gmail.com>
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240611122258.47406-1-animeshagarwal28@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert the WM8782 audio codec bindings to DT schema.
Signed-off-by: Animesh Agarwal <animeshagarwal28@gmail.com>
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240611124405.63427-1-animeshagarwal28@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert the dummy SPDIF receiver bindings to DT schema.
Signed-off-by: Animesh Agarwal <animeshagarwal28@gmail.com>
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240606041212.78428-1-animeshagarwal28@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert the AK4554 sound codec bindings to DT schema.
Signed-off-by: Animesh Agarwal <animeshagarwal28@gmail.com>
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240607055725.38057-1-animeshagarwal28@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Mohammad Rafi Shaik <quic_mohs@quicinc.com>:
This patchset adds support for Qualcomm WCD9370/WCD9375 codec.
Qualcomm WCD9370/WCD9375 Codec is a standalone Hi-Fi audio codec IC
connected over SoundWire. This device has two SoundWire devices, RX and
TX respectively supporting 3 x ADCs, ClassH, Ear, Aux PA, 2xHPH,
6 DMICs and MBHC.
For codec driver to be functional it would need both tx and rx Soundwire devices
to be up and this is taken care by using device component framework and device-links
are used to ensure proper pm dependencies. Ex tx does not enter suspend
before rx or codec is suspended.
This patchset along with other SoundWire patches on the list
have been tested on QCM6490 IDP device.
|
|
Convert the OMAP4+ McPDM bindings from txt to yaml (dtschema).
Drop ti,hwmods property as it is not needed since the sysc conversion.
Add dma, dma-names, reg-names properties to match the DTS so as to not
break the already existing ABI.
Also update example node to match the existing node in the DTS.
Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240608095305.2887-1-bavishimithil@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
