summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts
AgeCommit message (Collapse)AuthorFilesLines
2022-05-06arm64: dts: renesas: Remove empty rgb output endpointsLaurent Pinchart1-1/+1
Endpoints node must have a remote-endpoint property, as endpoints only exist to model a link between ports. Drop the empty rgb output endpoints from SoC dtsi files, and declare them in the board dts instead. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20220424161228.8147-2-laurent.pinchart+renesas@ideasonboard.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-03-08arm64: dts: renesas: Add mmc aliases into board dts filesYoshihiro Shimoda1-0/+2
After the commit 7320915c8861 ("mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.14"), the order of /dev/mmcblkN was not fixed in some SoCs which have multiple sdhi controllers. So, we were hard to use an sdhi device as rootfs by using the kernel parameter like "root=/dev/mmcblkNpM". According to the discussion on a mainling list [1], we can add mmc aliases to fix the issue. So, add such aliases into Renesas arm64 board dts files. Notes that mmc0 is an eMMC channel if available. [1] https://lore.kernel.org/linux-arm-kernel/CAPDyKFptyEQNJu8cqzMt2WRFZcwEdjDiytMBp96nkoZyprTgmA@mail.gmail.com/ Fixes: 7320915c8861 ("mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.14") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1614596786-22326-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-03-08arm64: dts: renesas: Group tuples in pin control propertiesGeert Uytterhoeven1-1/+1
To improve human readability and enable automatic validation, the tuples in "pinctrl-*" properties should be grouped using angle brackets. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20210204130517.1647073-6-geert+renesas@glider.be
2021-03-08arm64: dts: renesas: Group tuples in playback and capture propertiesGeert Uytterhoeven1-1/+1
To improve human readability and enable automatic validation, the tuples in "playback" and "capture" properties in sound device nodes should be grouped using angle brackets. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20210204130517.1647073-5-geert+renesas@glider.be
2020-11-10arm64: dts: renesas: cat874: Move connector node out of hd3ss3220 deviceBiju Das1-17/+50
Move connector node out of hd3ss3220 device in order to comply with usb connector bindings. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20200920134905.4370-6-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-12-20arm64: dts: renesas: Group tuples in regulator-gpio states propertiesGeert Uytterhoeven1-2/+1
To improve human readability and enable automatic validation, the tuples in the "states" properties of device nodes compatible with "regulator-gpio" should be grouped, as reported by "make dtbs_check": $ make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/regulator/gpio-regulator.yaml arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dt.yaml: regulator-vccq-sdhi0: states:0: Additional items are not allowed (1800000, 0 were unexpected) arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dt.yaml: regulator-vccq-sdhi0: states:0: [3300000, 1, 1800000, 0] is too long arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dt.yaml: regulator-vccq-sdhi3: states:0: Additional items are not allowed (1800000, 0 were unexpected) arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dt.yaml: regulator-vccq-sdhi3: states:0: [3300000, 1, 1800000, 0] is too long ... Fix this by grouping the tuples using angle brackets. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191213164115.3697-6-geert+renesas@glider.be Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
2019-08-21arm64: dts: renesas: r8a774c0: cat874: Sort nodesYoshihiro Kaneko1-14/+14
Sort nodes. If node address is present * Sort by node address, grouping all nodes with the same compat string and sorting the group alphabetically. Else * Sort alphabetically This should not have any run-time effect. Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-08-05arm64: dts: renesas: r8a774c0: cat874: Add definition for 12V regulatorFabrizio Castro1-0/+9
Power rail "D12.0V" comes straight from the power barrel connector, and it's used in both main board and sub board. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-06-12arm64: dts: renesas: cat874: Enable usb role switch supportBiju Das1-0/+32
This patch enables TI HD3SS3220 device and support usb role switch for the CAT 874 platform. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-06-12arm64: dts: renesas: cat874: Enable USB3.0 host/peripheral device nodeBiju Das1-0/+17
This patch enables USB3.0 host/peripheral device node for the cat874 board. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-06-06arm64: dts: renesas: Use ip=on for bootargsMagnus Damm1-1/+1
Convert bootargs from ip=dhcp to ip=on Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-05-28arm64: dts: renesas: cat874: Add BT supportBiju Das1-0/+19
This patch enables BT support for the CAT874 board. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-05-28arm64: dts: renesas: cat874: Add WLAN supportBiju Das1-0/+38
This patch enables WLAN support for the CAT874 board. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-05-20arm64: dts: renesas: cat874: Add HDMI audioFabrizio Castro1-0/+56
The CAT874 board pushes sound via I2S over SSI0 into the TDA19988BET chip. This commit wires things up so that we can get sound out of the HDMI interface. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-05-20arm64: dts: renesas: cat874: Add HDMI video supportFabrizio Castro1-0/+82
The CAT874 board comes with a HDMI connector, managed by a TDA19988BET chip, connected to the RZ/G2E SoC via DPAD. This patch adds the necessary support to the board DT. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-04arm64: dts: renesas: cat874: Add USB-HOST supportFabrizio Castro1-0/+15
This patch adds USB 2.0 HOST support to the CAT874 board. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-03-18arm64: dts: renesas: r8a774c0-cat874: Add RWDT supportFabrizio Castro1-0/+5
Enable RWDT and use 60 seconds as default timeout. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Chris Paterson <chris.paterson2@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-03-18arm64: dts: renesas: r8a774c0-cat874: Add LEDs supportFabrizio Castro1-0/+24
This patch adds LEDs support to the CAT874 board specific device tree. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-03-18arm64: dts: renesas: r8a774c0-cat874: add RTC supportBiju Das1-0/+18
This patch adds Epson RX-8571 real time clock support. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-02-08arm64: dts: renesas: r8a774c0-cat874: Add pciec0 supportBiju Das1-0/+9
Silicon Linux CAT 874 board has 2GB DDR memory. Update the dma-ranges mapping for pciec0 node. Also declare pcie bus clock, since it is generated on the CAT874 main board. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-23arm64: dts: renesas: r8a774c0-cat874: Add uSD supportBiju Das1-0/+50
This patch adds uSD card support. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-23arm64: dts: renesas: r8a774c0-cat874: Add pincontrol support to scif2Biju Das1-0/+10
This patch adds pincontrol support to scif2. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-23arm64: dts: renesas: Add Si-Linux CAT874 board supportBiju Das1-0/+37
Basic support for the Si-Linux board based on RZ/G2E: - Memory, - Main crystal, - Serial console Signed-off-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-27 04:04:59 +0300