summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/renesas/r8a77960.dtsi
AgeCommit message (Collapse)AuthorFilesLines
2024-02-06arm64: dts: renesas: Improve TMU interrupt descriptionsGeert Uytterhoeven1-2/+9
Add the input capture interrupt on Timer Unit instances that have it. Add "interrupt-names" properties for clarity. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/5c70ad8c2ea14333616c5add31a4a958f4a47081.1705325654.git.geert+renesas@glider.be
2023-09-11arm64: dts: renesas: Handle ADG bit for sound clk_iKuninori Morimoto1-3/+1
Renesas Sound has been using CPG_AUDIO_CLK_I on CPG_CORE for clock, but this was wrong. Instead, it needs to use CPG_MOD, so clk_i can handle the "ADG" bit in SMSTPCR9. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Vincenzo De Michele <vincenzo.michele@davinci.de> [r8a77965] Tested-by: Patrick Keil <patrick.keil@conti-engineering.com> [r8a77965] Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/87y1i3sjoc.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/87wmxnsjo7.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/87v8d7sjo2.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/87ttsrsjnx.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/87sf8bsjns.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/87r0nvsjnn.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/87pm3fsjni.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/87o7izsjnd.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/87msyjsjn9.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/87lee3sjn4.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/87jztnsjmy.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/87il97sjmu.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/87h6orsjmp.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/87fs4bsjml.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/87edjvsjmg.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-06-02arm64: dts: renesas: Add IOMMU related properties into PCIe host nodesYoshihiro Shimoda1-4/+8
Add iommu-map and iommu-map-mask properties to the PCIe host nodes. Note that iommu-map-mask should be zero because the IPMMU assigns one micro TLB ID only, to the PCIe host. Also change the dma-ranges arguments for IOMMU. Note that dma-ranges can be used if the IOMMU is disabled. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230510090358.261266-1-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-03-06arm64: dts: renesas: rcar-gen3: Remove bogus "turbo-mode" propertiesGeert Uytterhoeven1-2/+0
On several R-Car Gen3(e) SoCs, multiple (up to 4) operating points in the same cluster are marked with the "turbo-mode" property, which is meant only for operating points beyond "Normal Mode". Fix this by dropping the property from all operating points but the "High Performance" one. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/866d06aec09e5a86dba11970f93a728b3e34e9f5.1675335086.git.geert+renesas@glider.be
2023-01-26arm64: dts: renesas: #sound-dai-cells is used when simple-cardKuninori Morimoto1-1/+1
Current sound comment is indicating that #sound-dai-cells is required, but it is needed only if board is using "simple-card". Hence tidy up the comments. As ulcb.dtsi and salvator-common.dtsi are already using "audio-graph", the unneeded #sound-dai-cells are removed. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/87cz7ji418.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-08-29arm64: dts: renesas: r8a779{51|60|65}: Put I2C aliases to board filesWolfram Sang1-11/+0
I2C aliases are not a property of a SoC. They belong to board files where they are named accordingly in the schematics. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220825071022.7864-2-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-06arm64: dts: renesas: Add interrupt-names to CANFD nodesGeert Uytterhoeven1-0/+1
The Renesas R-Car CAN-FD Controller on R-Car Gen3 and RZ/G2 SoCs has two interrupts. Add interrupt-names properties to all CAN-FD device nodes to identify the individual interrupts, so we can make this property a required property in the DT bindings. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/10eef1e20372af4a156b06df8e5124666ec7c6b6.1651512451.git.geert+renesas@glider.be
2022-05-06arm64: dts: renesas: Remove empty rgb output endpointsLaurent Pinchart1-2/+0
Endpoints node must have a remote-endpoint property, as endpoints only exist to model a link between ports. Drop the empty rgb output endpoints from SoC dtsi files, and declare them in the board dts instead. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20220424161228.8147-2-laurent.pinchart+renesas@ideasonboard.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-06arm64: dts: renesas: Remove empty lvds endpointsLaurent Pinchart1-2/+0
Endpoints node must have a remote-endpoint property, as endpoints only exist to model a link between ports. Drop the empty lvds endpoints from SoC dtsi files, they should be instead declared in the board dts or in overlays. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20220424161228.8147-1-laurent.pinchart+renesas@ideasonboard.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-04-13arm64: dts: renesas: rcar-gen3: Add RPC device nodesGeert Uytterhoeven1-0/+16
Add device nodes for the SPI Multi I/O Bus Controllers (RPC-IF) on the various R-Car Gen3 SoCs that do not have support for them yet in their device trees (R-Car H3, M3-W, M3-W+, M3-N, E3, and D3). Based on patches in the BSP by Valentine Barshak. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/3231749c7b63df1a2134daabe66446a3e0e5515b.1648548339.git.geert+renesas@glider.be
2022-04-13arm64: dts: renesas: rcar-gen3: Add interrupt properties to watchdog nodesWolfram Sang1-0/+1
Driver doesn't use it yet, but let's describe the HW properly. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220322095512.4707-4-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-01-28arm64: dts: renesas: rcar-gen3: Add MOST devicesNikita Yushchenko1-0/+12
This patch adds the MLP device nodes to dtsi files for R-Car Gen3 SoCs that have it. Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Link: https://lore.kernel.org/r/20220120051559.746322-1-nikita.yoush@cogentembedded.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-01-28arm64: dts: renesas: Miscellaneous whitespace fixesGeert Uytterhoeven1-7/+7
Make whitespace and indentation more consistent. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/3f2bcae1253c7a31d3eb6755185092a1f2b99b09.1642524439.git.geert+renesas@glider.be
2021-12-07arm64: dts: renesas: Fix thermal bindingsKieran Bingham1-3/+3
The binding node names for the thermal zones are not successfully validated by the dt-schemas. Fix the validation by changing from sensor-thermalN or thermal-sensor-N to sensorN-thermal. Provide node labels of the form sensorN_thermal to ensure consistency with the other platform implementations. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20211104224033.3997504-1-kieran.bingham+renesas@ideasonboard.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-11-26arm64: dts: renesas: Fix operating point table node namesGeert Uytterhoeven1-2/+2
Align the node names of device nodes representing operating point v2 tables with the expectations of the DT bindings in Documentation/devicetree/bindings/opp/opp-v2.yaml. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/ac885456ffb00fa4cc4069b9967761df2c98c3d8.1637764588.git.geert+renesas@glider.be
2021-11-19arm64: dts: reneas: rcar-gen3: Add SDnH clocksWolfram Sang1-4/+8
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20211110191610.5664-13-wsa+renesas@sang-engineering.com Link: https://lore.kernel.org/r/20211110191610.5664-14-wsa+renesas@sang-engineering.com Link: https://lore.kernel.org/r/20211110191610.5664-15-wsa+renesas@sang-engineering.com Link: https://lore.kernel.org/r/20211110191610.5664-16-wsa+renesas@sang-engineering.com Link: https://lore.kernel.org/r/20211110191610.5664-17-wsa+renesas@sang-engineering.com Link: https://lore.kernel.org/r/20211110191610.5664-18-wsa+renesas@sang-engineering.com Link: https://lore.kernel.org/r/20211110191610.5664-19-wsa+renesas@sang-engineering.com Link: https://lore.kernel.org/r/20211110191610.5664-22-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-05-31arm64: dts: renesas: r8a7796[01]: Fix OPP table entry voltagesGeert Uytterhoeven1-3/+3
Correct the voltages in the "Power Optimized" (<= 1.5 GHz) Cortex-A57 operating point table entries for the R-Car M3-W and M3-W+ SoCs from 0.82V to 0.83V, as per the R-Car Gen3 EC Manual Errata for Revision 0.53. Based on a patch for R-Car M3-W in the BSP by Takeshi Kihara <takeshi.kihara.df@renesas.com>. Fixes: da7e3113344fda50 ("arm64: dts: renesas: r8a7796: Add OPPs table for cpu devices") Fixes: f51746ad7d1ff6b4 ("arm64: dts: renesas: Add Renesas R8A77961 SoC support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/b9e9db907514790574429b83d070c823b36085ef.1619699909.git.geert+renesas@glider.be
2021-05-31arm64: dts: renesas: Add missing opp-suspend propertiesGeert Uytterhoeven1-0/+1
Tag the highest "Power Optimized" (1.5 GHz) Cortex-A57 operating point table entries for the RZ/G2M, R-Car M3-W and M3-W+ SoCs with the "opp-suspend" property. This makes sure the system will enter suspend in the same performance state as it will be resumed by the firmware later, avoiding state inconsistencies after resume. Based on a patch for R-Car M3-W in the BSP by Takeshi Kihara <takeshi.kihara.df@renesas.com>. Fixes: 800037e815b91d8c ("arm64: dts: renesas: r8a774a1: Add operating points") Fixes: da7e3113344fda50 ("arm64: dts: renesas: r8a7796: Add OPPs table for cpu devices") Fixes: f51746ad7d1ff6b4 ("arm64: dts: renesas: Add Renesas R8A77961 SoC support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/45a061c3b0463aac7d10664f47c4afdd999da50d.1619699721.git.geert+renesas@glider.be
2021-05-25arm64: dts: renesas: Add fck to etheravb-rcar-gen3 clock-names listAdam Ford1-0/+1
The bindings have been updated to support two clocks. Add a clock-names list in the device tree with fck in it. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20210224115146.9131-3-aford173@gmail.com [geert: Update new r8a779a0.dtsi] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-04-27arm64: dts: renesas: Add port@0 node for all CSI-2 nodes to dtsiNiklas Söderlund1-0/+8
The port@0 is a mandatory port, add or move the declaration to the CSI-2 nodes top declared in dtsi files instead of depending on dts files adding them when describing the external connection. This fixes validation warnings for DTB outputs that do not connect all CSI-2 receivers to transmitters and thus declaring all port@0 nodes in dts files. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20210421150221.3202955-3-niklas.soderlund+renesas@ragnatech.se Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-12-28arm64: dts: renesas: rcar-gen3: Add missing TMU nodesNiklas Söderlund1-0/+65
Add device nodes for the Timer Unit (TMU) on the Renesas R-Car H3 (r8a77951), M3-W (r8a77960), M3-W+ (r8a77961), M3-N (r8a77965), E3 (r8a77990), and D3 (r8a77995) SoCs. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20201210152705.1535156-2-niklas.soderlund+renesas@ragnatech.se [geert: squashed six commits] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-11-10arm64: dts: renesas: rcar-gen3: Convert EtherAVB to explicit delay handlingGeert Uytterhoeven1-0/+2
Some EtherAVB variants support internal clock delay configuration, which can add larger delays than the delays that are typically supported by the PHY (using an "rgmii-*id" PHY mode, and/or "[rt]xc-skew-ps" properties). Historically, the EtherAVB driver configured these delays based on the "rgmii-*id" PHY mode. This was wrong, as these are meant solely for the PHY, not for the MAC. Hence properties were introduced for explicit configuration of these delays. Convert the R-Car Gen3 DTS files from the old to the new scheme: - Add default "rx-internal-delay-ps" and "tx-internal-delay-ps" properties to the SoC .dtsi files, to be overridden by board files where needed, - Convert board files from "rgmii-*id" PHY modes to "rgmii", adding the appropriate "rx-internal-delay-ps" and/or "tx-internal-delay-ps" overrides. Notes: - R-Car E3 and D3 do not support TX internal delay handling, - On R-Car D3, TX internal delay handling must always be enabled, hence this fixes a bug on Draak, - On R-Car V3H, RX internal delay handling must always be enabled. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200819134344.27813-7-geert+renesas@glider.be
2020-09-11arm64: dts: renesas: Fix pin controller node namesGeert Uytterhoeven1-1/+1
According to Devicetree Specification v0.2 and later, Section "Generic Names Recommendation", the node name for a pin controller device node should be "pinctrl". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20200821112433.5652-1-geert+renesas@glider.be
2020-07-17arm64: dts: renesas: Fix SD Card/eMMC interface device node namesYoshihiro Shimoda1-4/+4
Fix the device node names as "mmc@". Fixes: 663386c3e1aa ("arm64: dts: renesas: r8a774a1: Add SDHI nodes") Fixes: 9b33e3001b67 ("arm64: dts: renesas: Initial r8a774b1 SoC device tree") Fixes: 77223211f44d ("arm64: dts: renesas: r8a774c0: Add SDHI nodes") Fixes: d9d67010e0c6 ("arm64: dts: r8a7795: Add SDHI support to dtsi") Fixes: a513cf1e6457 ("arm64: dts: r8a7796: add SDHI nodes") Fixes: 111cc9ace2b5 ("arm64: dts: renesas: r8a77961: Add SDHI nodes") Fixes: f51746ad7d1f ("arm64: dts: renesas: Add Renesas R8A77961 SoC support") Fixes: df863d6f95f5 ("arm64: dts: renesas: initial R8A77965 SoC device tree") Fixes: 9aa3558a02f0 ("arm64: dts: renesas: ebisu: Add and enable SDHI device nodes") Fixes: 83f18749c2f6 ("arm64: dts: renesas: r8a77995: Add SDHI (MMC) support") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1594382634-13714-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-04-27arm64: dts: renesas: Fix IOMMU device node namesYoshihiro Shimoda1-11/+11
Fix IOMMU device node names as "iommu@". Fixes: 8f507babc617 ("arm64: dts: renesas: r8a774a1: Add IPMMU device nodes") Fixes: 63093a8e58be ("arm64: dts: renesas: r8a774b1: Add IPMMU device nodes") Fixes: 6c7e02178e8f ("arm64: dts: renesas: r8a774c0: Add IPMMU device nodes") Fixes: 3b7e7848f0e8 ("arm64: dts: renesas: r8a7795: Add IPMMU device nodes") Fixes: e4b9a493df45 ("arm64: dts: renesas: r8a7795-es1: Add IPMMU device nodes") Fixes: 389baa409617 ("arm64: dts: renesas: r8a7796: Add IPMMU device nodes") Fixes: 55697cbb44e4 ("arm64: dts: renesas: r8a779{65,80,90}: Add IPMMU devices nodes") Fixes: ce3b52a1595b ("arm64: dts: renesas: r8a77970: Add IPMMU device nodes") Fixes: a3901e7398e1 ("arm64: dts: renesas: r8a77995: Add IPMMU device nodes") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/1587461775-13369-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-02-21arm64: dts: renesas: rcar-gen3: Add reset control properties for displayGeert Uytterhoeven1-2/+3
Add reset control properties to the device nodes for the Display Units on all supported R-Car Gen3 SoCs. Note that on these SoCs, there is only a single reset for each pair of DU channels. The display nodes on R-Car V3M and V3H already had "resets" properties, but lacked the corresponding "reset-names" properties. Join the clocks lines while at it, to increase uniformity. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20200218133019.22299-4-geert+renesas@glider.be
2020-02-21arm64: dts: renesas: rcar-gen3: Add CCREE nodesGeert Uytterhoeven1-0/+9
Add device nodes for the CryptoCell instances on the various Renesas R-Car Gen3 SoCs that do not have support for them yet in their device trees (M3-W, M3-W+, M3-N, E3, D3). The R-Car H3 device tree already supports this device. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20200124133330.16121-1-geert+renesas@glider.be
2020-02-21arm64: dts: renesas: rcar-gen3: Replace "vsps" by "renesas,vsps"Geert Uytterhoeven1-1/+1
The Renesas-specific "vsps" property lacks a vendor prefix. Add a "renesas," prefix to comply with DT best practises. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20191105183504.21447-4-geert+renesas@glider.be
2019-12-20arm64: dts: renesas: Group tuples in pci ranges and dma-ranges propertiesGeert Uytterhoeven1-8/+8
To improve human readability and enable automatic validation, the tuples in the "ranges" and "dma-ranges" properties of PCI device nodes should be grouped. Fix this by grouping the tuples of the "ranges" and "dma-ranges" properties using angle brackets. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191213164115.3697-8-geert+renesas@glider.be Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
2019-12-20arm64: dts: renesas: Group tuples in interrupt propertiesGeert Uytterhoeven1-95/+95
To improve human readability and enable automatic validation, the tuples in the various properties containing interrupt specifiers should be grouped. While "make dtbs_check" does not impose this yet for the "interrupts" property, it does for the "interrupt-map" property. Fix this by grouping the tuples of the "interrupts" and "interrupt-map" properties using angle brackets. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191213164115.3697-7-geert+renesas@glider.be Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
2019-12-13arm64: dts: renesas: Rename r8a7796* to r8a77960*Geert Uytterhoeven1-0/+2972
CONFIG_ARCH_R8A7796 was renamed to CONFIG_ARCH_R8A77960 in commit 39e57e14d7eaf818 ("soc: renesas: Add ARCH_R8A77960 for existing R-Car M3-W"), to avoid confusion between R-Car M3-W (R8A77960) and R-Car M3-W+ (R8A77961). Rename the DTS files as well, for consistency. Note that DT binding headers, definitions, and compatible values were not renamed, to preserve backward compatibility. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191211131311.23661-1-geert+renesas@glider.be Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-27 07:13:53 +0300